Fixed a compiler error with std::chrono::duration

1 files changed, 7377 insertions, 7377 deletions

diff --git a/gtest-1.6.0/m4/libtool.m4 b/gtest-1.6.0/m4/libtool.m4
index a3fee53..dc09484 100644
--- a/gtest-1.6.0/m4/libtool.m4
+++ b/gtest-1.6.0/m4/libtool.m4
@@ -1,7377 +1,7377 @@
-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
-#
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008 Free Software Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-# This file is free software; the Free Software Foundation gives
-# unlimited permission to copy and/or distribute it, with or without
-# modifications, as long as this notice is preserved.
-
-m4_define([_LT_COPYING], [dnl
-#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-#                 2006, 2007, 2008 Free Software Foundation, Inc.
-#   Written by Gordon Matzigkeit, 1996
-#
-#   This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING.  If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
-])
-
-# serial 56 LT_INIT
-
-
-# LT_PREREQ(VERSION)
-# ------------------
-# Complain and exit if this libtool version is less that VERSION.
-m4_defun([LT_PREREQ],
-[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
-       [m4_default([$3],
-		   [m4_fatal([Libtool version $1 or higher is required],
-		             63)])],
-       [$2])])
-
-
-# _LT_CHECK_BUILDDIR
-# ------------------
-# Complain if the absolute build directory name contains unusual characters
-m4_defun([_LT_CHECK_BUILDDIR],
-[case `pwd` in
-  *\ * | *\	*)
-    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
-esac
-])
-
-
-# LT_INIT([OPTIONS])
-# ------------------
-AC_DEFUN([LT_INIT],
-[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
-AC_BEFORE([$0], [LT_LANG])dnl
-AC_BEFORE([$0], [LT_OUTPUT])dnl
-AC_BEFORE([$0], [LTDL_INIT])dnl
-m4_require([_LT_CHECK_BUILDDIR])dnl
-
-dnl Autoconf doesn't catch unexpanded LT_ macros by default:
-m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
-m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
-dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
-dnl unless we require an AC_DEFUNed macro:
-AC_REQUIRE([LTOPTIONS_VERSION])dnl
-AC_REQUIRE([LTSUGAR_VERSION])dnl
-AC_REQUIRE([LTVERSION_VERSION])dnl
-AC_REQUIRE([LTOBSOLETE_VERSION])dnl
-m4_require([_LT_PROG_LTMAIN])dnl
-
-dnl Parse OPTIONS
-_LT_SET_OPTIONS([$0], [$1])
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-_LT_SETUP
-
-# Only expand once:
-m4_define([LT_INIT])
-])# LT_INIT
-
-# Old names:
-AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
-AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
-dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
-
-
-# _LT_CC_BASENAME(CC)
-# -------------------
-# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
-m4_defun([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
-  case $cc_temp in
-    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
-    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
-    \-*) ;;
-    *) break;;
-  esac
-done
-cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
-])
-
-
-# _LT_FILEUTILS_DEFAULTS
-# ----------------------
-# It is okay to use these file commands and assume they have been set
-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
-m4_defun([_LT_FILEUTILS_DEFAULTS],
-[: ${CP="cp -f"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-])# _LT_FILEUTILS_DEFAULTS
-
-
-# _LT_SETUP
-# ---------
-m4_defun([_LT_SETUP],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-_LT_DECL([], [host_alias], [0], [The host system])dnl
-_LT_DECL([], [host], [0])dnl
-_LT_DECL([], [host_os], [0])dnl
-dnl
-_LT_DECL([], [build_alias], [0], [The build system])dnl
-_LT_DECL([], [build], [0])dnl
-_LT_DECL([], [build_os], [0])dnl
-dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([LT_PATH_LD])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-test -z "$LN_S" && LN_S="ln -s"
-_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
-dnl
-AC_REQUIRE([LT_CMD_MAX_LEN])dnl
-_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
-_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
-dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_CHECK_SHELL_FEATURES])dnl
-m4_require([_LT_CMD_RELOAD])dnl
-m4_require([_LT_CHECK_MAGIC_METHOD])dnl
-m4_require([_LT_CMD_OLD_ARCHIVE])dnl
-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-
-_LT_CONFIG_LIBTOOL_INIT([
-# See if we are running on zsh, and set the options which allow our
-# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
-   setopt NO_GLOB_SUBST
-fi
-])
-if test -n "${ZSH_VERSION+set}" ; then
-   setopt NO_GLOB_SUBST
-fi
-
-_LT_CHECK_OBJDIR
-
-m4_require([_LT_TAG_COMPILER])dnl
-_LT_PROG_ECHO_BACKSLASH
-
-case $host_os in
-aix3*)
-  # AIX sometimes has problems with the GCC collect2 program.  For some
-  # reason, if we set the COLLECT_NAMES environment variable, the problems
-  # vanish in a puff of smoke.
-  if test "X${COLLECT_NAMES+set}" != Xset; then
-    COLLECT_NAMES=
-    export COLLECT_NAMES
-  fi
-  ;;
-esac
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\([["`\\]]\)/\\\1/g'
-
-# Sed substitution to delay expansion of an escaped shell variable in a
-# double_quote_subst'ed string.
-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
-
-# Sed substitution to delay expansion of an escaped single quote.
-delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'
-
-# Sed substitution to avoid accidental globbing in evaled expressions
-no_glob_subst='s/\*/\\\*/g'
-
-# Global variables:
-ofile=libtool
-can_build_shared=yes
-
-# All known linkers require a `.a' archive for static linking (except MSVC,
-# which needs '.lib').
-libext=a
-
-with_gnu_ld="$lt_cv_prog_gnu_ld"
-
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
-
-# Set sane defaults for various variables
-test -z "$CC" && CC=cc
-test -z "$LTCC" && LTCC=$CC
-test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS
-test -z "$LD" && LD=ld
-test -z "$ac_objext" && ac_objext=o
-
-_LT_CC_BASENAME([$compiler])
-
-# Only perform the check for file, if the check method requires it
-test -z "$MAGIC_CMD" && MAGIC_CMD=file
-case $deplibs_check_method in
-file_magic*)
-  if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    _LT_PATH_MAGIC
-  fi
-  ;;
-esac
-
-# Use C for the default configuration in the libtool script
-LT_SUPPORTED_TAG([CC])
-_LT_LANG_C_CONFIG
-_LT_LANG_DEFAULT_CONFIG
-_LT_CONFIG_COMMANDS
-])# _LT_SETUP
-
-
-# _LT_PROG_LTMAIN
-# ---------------
-# Note that this code is called both from `configure', and `config.status'
-# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,
-# `config.status' has no value for ac_aux_dir unless we are using Automake,
-# so we pass a copy along to make sure it has a sensible value anyway.
-m4_defun([_LT_PROG_LTMAIN],
-[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
-_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
-ltmain="$ac_aux_dir/ltmain.sh"
-])# _LT_PROG_LTMAIN
-
-
-## ------------------------------------- ##
-## Accumulate code for creating libtool. ##
-## ------------------------------------- ##
-
-# So that we can recreate a full libtool script including additional
-# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
-# in macros and then make a single call at the end using the `libtool'
-# label.
-
-
-# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])
-# ----------------------------------------
-# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-m4_define([_LT_CONFIG_LIBTOOL_INIT],
-[m4_ifval([$1],
-          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],
-                     [$1
-])])])
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_INIT])
-
-
-# _LT_CONFIG_LIBTOOL([COMMANDS])
-# ------------------------------
-# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.
-m4_define([_LT_CONFIG_LIBTOOL],
-[m4_ifval([$1],
-          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],
-                     [$1
-])])])
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])
-
-
-# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])
-# -----------------------------------------------------
-m4_defun([_LT_CONFIG_SAVE_COMMANDS],
-[_LT_CONFIG_LIBTOOL([$1])
-_LT_CONFIG_LIBTOOL_INIT([$2])
-])
-
-
-# _LT_FORMAT_COMMENT([COMMENT])
-# -----------------------------
-# Add leading comment marks to the start of each line, and a trailing
-# full-stop to the whole comment if one is not present already.
-m4_define([_LT_FORMAT_COMMENT],
-[m4_ifval([$1], [
-m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],
-              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])
-)])
-
-
-
-## ------------------------ ##
-## FIXME: Eliminate VARNAME ##
-## ------------------------ ##
-
-
-# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])
-# -------------------------------------------------------------------
-# CONFIGNAME is the name given to the value in the libtool script.
-# VARNAME is the (base) name used in the configure script.
-# VALUE may be 0, 1 or 2 for a computed quote escaped value based on
-# VARNAME.  Any other value will be used directly.
-m4_define([_LT_DECL],
-[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],
-    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],
-	[m4_ifval([$1], [$1], [$2])])
-    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])
-    m4_ifval([$4],
-	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])
-    lt_dict_add_subkey([lt_decl_dict], [$2],
-	[tagged?], [m4_ifval([$5], [yes], [no])])])
-])
-
-
-# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])
-# --------------------------------------------------------
-m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])
-
-
-# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-m4_define([lt_decl_tag_varnames],
-[_lt_decl_filter([tagged?], [yes], $@)])
-
-
-# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])
-# ---------------------------------------------------------
-m4_define([_lt_decl_filter],
-[m4_case([$#],
-  [0], [m4_fatal([$0: too few arguments: $#])],
-  [1], [m4_fatal([$0: too few arguments: $#: $1])],
-  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],
-  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],
-  [lt_dict_filter([lt_decl_dict], $@)])[]dnl
-])
-
-
-# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])
-# --------------------------------------------------
-m4_define([lt_decl_quote_varnames],
-[_lt_decl_filter([value], [1], $@)])
-
-
-# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-m4_define([lt_decl_dquote_varnames],
-[_lt_decl_filter([value], [2], $@)])
-
-
-# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])
-# ---------------------------------------------------
-m4_define([lt_decl_varnames_tagged],
-[m4_assert([$# <= 2])dnl
-_$0(m4_quote(m4_default([$1], [[, ]])),
-    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),
-    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])
-m4_define([_lt_decl_varnames_tagged],
-[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])
-
-
-# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])
-# ------------------------------------------------
-m4_define([lt_decl_all_varnames],
-[_$0(m4_quote(m4_default([$1], [[, ]])),
-     m4_if([$2], [],
-	   m4_quote(lt_decl_varnames),
-	m4_quote(m4_shift($@))))[]dnl
-])
-m4_define([_lt_decl_all_varnames],
-[lt_join($@, lt_decl_varnames_tagged([$1],
-			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl
-])
-
-
-# _LT_CONFIG_STATUS_DECLARE([VARNAME])
-# ------------------------------------
-# Quote a variable value, and forward it to `config.status' so that its
-# declaration there will have the same value as in `configure'.  VARNAME
-# must have a single quote delimited value for this to work.
-m4_define([_LT_CONFIG_STATUS_DECLARE],
-[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])
-
-
-# _LT_CONFIG_STATUS_DECLARATIONS
-# ------------------------------
-# We delimit libtool config variables with single quotes, so when
-# we write them to config.status, we have to be sure to quote all
-# embedded single quotes properly.  In configure, this macro expands
-# each variable declared with _LT_DECL (and _LT_TAGDECL) into:
-#
-#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'
-m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],
-[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),
-    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])
-
-
-# _LT_LIBTOOL_TAGS
-# ----------------
-# Output comment and list of tags supported by the script
-m4_defun([_LT_LIBTOOL_TAGS],
-[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
-available_tags="_LT_TAGS"dnl
-])
-
-
-# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])
-# -----------------------------------
-# Extract the dictionary values for VARNAME (optionally with TAG) and
-# expand to a commented shell variable setting:
-#
-#    # Some comment about what VAR is for.
-#    visible_name=$lt_internal_name
-m4_define([_LT_LIBTOOL_DECLARE],
-[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],
-					   [description])))[]dnl
-m4_pushdef([_libtool_name],
-    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl
-m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),
-    [0], [_libtool_name=[$]$1],
-    [1], [_libtool_name=$lt_[]$1],
-    [2], [_libtool_name=$lt_[]$1],
-    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl
-m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl
-])
-
-
-# _LT_LIBTOOL_CONFIG_VARS
-# -----------------------
-# Produce commented declarations of non-tagged libtool config variables
-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
-# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG
-# section) are produced by _LT_LIBTOOL_TAG_VARS.
-m4_defun([_LT_LIBTOOL_CONFIG_VARS],
-[m4_foreach([_lt_var],
-    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),
-    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])
-
-
-# _LT_LIBTOOL_TAG_VARS(TAG)
-# -------------------------
-m4_define([_LT_LIBTOOL_TAG_VARS],
-[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),
-    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])
-
-
-# _LT_TAGVAR(VARNAME, [TAGNAME])
-# ------------------------------
-m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])
-
-
-# _LT_CONFIG_COMMANDS
-# -------------------
-# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of
-# variables for single and double quote escaping we saved from calls
-# to _LT_DECL, we can put quote escaped variables declarations
-# into `config.status', and then the shell code to quote escape them in
-# for loops in `config.status'.  Finally, any additional code accumulated
-# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
-m4_defun([_LT_CONFIG_COMMANDS],
-[AC_PROVIDE_IFELSE([LT_OUTPUT],
-	dnl If the libtool generation code has been placed in $CONFIG_LT,
-	dnl instead of duplicating it all over again into config.status,
-	dnl then we will have config.status run $CONFIG_LT later, so it
-	dnl needs to know what name is stored there:
-        [AC_CONFIG_COMMANDS([libtool],
-            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],
-    dnl If the libtool generation code is destined for config.status,
-    dnl expand the accumulated commands and init code now:
-    [AC_CONFIG_COMMANDS([libtool],
-        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])
-])#_LT_CONFIG_COMMANDS
-
-
-# Initialize.
-m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],
-[
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-sed_quote_subst='$sed_quote_subst'
-double_quote_subst='$double_quote_subst'
-delay_variable_subst='$delay_variable_subst'
-_LT_CONFIG_STATUS_DECLARATIONS
-LTCC='$LTCC'
-LTCFLAGS='$LTCFLAGS'
-compiler='$compiler_DEFAULT'
-
-# Quote evaled strings.
-for var in lt_decl_all_varnames([[ \
-]], lt_decl_quote_varnames); do
-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
-    *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
-      ;;
-    *)
-      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-      ;;
-    esac
-done
-
-# Double-quote double-evaled strings.
-for var in lt_decl_all_varnames([[ \
-]], lt_decl_dquote_varnames); do
-    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in
-    *[[\\\\\\\`\\"\\\$]]*)
-      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
-      ;;
-    *)
-      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
-      ;;
-    esac
-done
-
-# Fix-up fallback echo if it was mangled by the above quoting rules.
-case \$lt_ECHO in
-*'\\\[$]0 --fallback-echo"')dnl "
-  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`
-  ;;
-esac
-
-_LT_OUTPUT_LIBTOOL_INIT
-])
-
-
-# LT_OUTPUT
-# ---------
-# This macro allows early generation of the libtool script (before
-# AC_OUTPUT is called), incase it is used in configure for compilation
-# tests.
-AC_DEFUN([LT_OUTPUT],
-[: ${CONFIG_LT=./config.lt}
-AC_MSG_NOTICE([creating $CONFIG_LT])
-cat >"$CONFIG_LT" <<_LTEOF
-#! $SHELL
-# Generated by $as_me.
-# Run this file to recreate a libtool stub with the current configuration.
-
-lt_cl_silent=false
-SHELL=\${CONFIG_SHELL-$SHELL}
-_LTEOF
-
-cat >>"$CONFIG_LT" <<\_LTEOF
-AS_SHELL_SANITIZE
-_AS_PREPARE
-
-exec AS_MESSAGE_FD>&1
-exec AS_MESSAGE_LOG_FD>>config.log
-{
-  echo
-  AS_BOX([Running $as_me.])
-} >&AS_MESSAGE_LOG_FD
-
-lt_cl_help="\
-\`$as_me' creates a local libtool stub from the current configuration,
-for use in further configure time tests before the real libtool is
-generated.
-
-Usage: $[0] [[OPTIONS]]
-
-  -h, --help      print this help, then exit
-  -V, --version   print version number, then exit
-  -q, --quiet     do not print progress messages
-  -d, --debug     don't remove temporary files
-
-Report bugs to <bug-libtool@gnu.org>."
-
-lt_cl_version="\
-m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl
-m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])
-configured by $[0], generated by m4_PACKAGE_STRING.
-
-Copyright (C) 2008 Free Software Foundation, Inc.
-This config.lt script is free software; the Free Software Foundation
-gives unlimited permision to copy, distribute and modify it."
-
-while test $[#] != 0
-do
-  case $[1] in
-    --version | --v* | -V )
-      echo "$lt_cl_version"; exit 0 ;;
-    --help | --h* | -h )
-      echo "$lt_cl_help"; exit 0 ;;
-    --debug | --d* | -d )
-      debug=: ;;
-    --quiet | --q* | --silent | --s* | -q )
-      lt_cl_silent=: ;;
-
-    -*) AC_MSG_ERROR([unrecognized option: $[1]
-Try \`$[0] --help' for more information.]) ;;
-
-    *) AC_MSG_ERROR([unrecognized argument: $[1]
-Try \`$[0] --help' for more information.]) ;;
-  esac
-  shift
-done
-
-if $lt_cl_silent; then
-  exec AS_MESSAGE_FD>/dev/null
-fi
-_LTEOF
-
-cat >>"$CONFIG_LT" <<_LTEOF
-_LT_OUTPUT_LIBTOOL_COMMANDS_INIT
-_LTEOF
-
-cat >>"$CONFIG_LT" <<\_LTEOF
-AC_MSG_NOTICE([creating $ofile])
-_LT_OUTPUT_LIBTOOL_COMMANDS
-AS_EXIT(0)
-_LTEOF
-chmod +x "$CONFIG_LT"
-
-# configure is writing to config.log, but config.lt does its own redirection,
-# appending to config.log, which fails on DOS, as config.log is still kept
-# open by configure.  Here we exec the FD to /dev/null, effectively closing
-# config.log, so it can be properly (re)opened and appended to by config.lt.
-if test "$no_create" != yes; then
-  lt_cl_success=:
-  test "$silent" = yes &&
-    lt_config_lt_args="$lt_config_lt_args --quiet"
-  exec AS_MESSAGE_LOG_FD>/dev/null
-  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
-  exec AS_MESSAGE_LOG_FD>>config.log
-  $lt_cl_success || AS_EXIT(1)
-fi
-])# LT_OUTPUT
-
-
-# _LT_CONFIG(TAG)
-# ---------------
-# If TAG is the built-in tag, create an initial libtool script with a
-# default configuration from the untagged config vars.  Otherwise add code
-# to config.status for appending the configuration named by TAG from the
-# matching tagged config vars.
-m4_defun([_LT_CONFIG],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-_LT_CONFIG_SAVE_COMMANDS([
-  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
-  m4_if(_LT_TAG, [C], [
-    # See if we are running on zsh, and set the options which allow our
-    # commands through without removal of \ escapes.
-    if test -n "${ZSH_VERSION+set}" ; then
-      setopt NO_GLOB_SUBST
-    fi
-
-    cfgfile="${ofile}T"
-    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
-    $RM "$cfgfile"
-
-    cat <<_LT_EOF >> "$cfgfile"
-#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
-# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
-# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
-_LT_COPYING
-_LT_LIBTOOL_TAGS
-
-# ### BEGIN LIBTOOL CONFIG
-_LT_LIBTOOL_CONFIG_VARS
-_LT_LIBTOOL_TAG_VARS
-# ### END LIBTOOL CONFIG
-
-_LT_EOF
-
-  case $host_os in
-  aix3*)
-    cat <<\_LT_EOF >> "$cfgfile"
-# AIX sometimes has problems with the GCC collect2 program.  For some
-# reason, if we set the COLLECT_NAMES environment variable, the problems
-# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
-  COLLECT_NAMES=
-  export COLLECT_NAMES
-fi
-_LT_EOF
-    ;;
-  esac
-
-  _LT_PROG_LTMAIN
-
-  # We use sed instead of cat because bash on DJGPP gets confused if
-  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
-  # text mode, it properly converts lines to CR/LF.  This bash problem
-  # is reportedly fixed, but why not run on old versions too?
-  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
-
-  _LT_PROG_XSI_SHELLFNS
-
-  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \
-    || (rm -f "$cfgfile"; exit 1)
-
-  mv -f "$cfgfile" "$ofile" ||
-    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
-  chmod +x "$ofile"
-],
-[cat <<_LT_EOF >> "$ofile"
-
-dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded
-dnl in a comment (ie after a #).
-# ### BEGIN LIBTOOL TAG CONFIG: $1
-_LT_LIBTOOL_TAG_VARS(_LT_TAG)
-# ### END LIBTOOL TAG CONFIG: $1
-_LT_EOF
-])dnl /m4_if
-],
-[m4_if([$1], [], [
-    PACKAGE='$PACKAGE'
-    VERSION='$VERSION'
-    TIMESTAMP='$TIMESTAMP'
-    RM='$RM'
-    ofile='$ofile'], [])
-])dnl /_LT_CONFIG_SAVE_COMMANDS
-])# _LT_CONFIG
-
-
-# LT_SUPPORTED_TAG(TAG)
-# ---------------------
-# Trace this macro to discover what tags are supported by the libtool
-# --tag option, using:
-#    autoconf --trace 'LT_SUPPORTED_TAG:$1'
-AC_DEFUN([LT_SUPPORTED_TAG], [])
-
-
-# C support is built-in for now
-m4_define([_LT_LANG_C_enabled], [])
-m4_define([_LT_TAGS], [])
-
-
-# LT_LANG(LANG)
-# -------------
-# Enable libtool support for the given language if not already enabled.
-AC_DEFUN([LT_LANG],
-[AC_BEFORE([$0], [LT_OUTPUT])dnl
-m4_case([$1],
-  [C],			[_LT_LANG(C)],
-  [C++],		[_LT_LANG(CXX)],
-  [Java],		[_LT_LANG(GCJ)],
-  [Fortran 77],		[_LT_LANG(F77)],
-  [Fortran],		[_LT_LANG(FC)],
-  [Windows Resource],	[_LT_LANG(RC)],
-  [m4_ifdef([_LT_LANG_]$1[_CONFIG],
-    [_LT_LANG($1)],
-    [m4_fatal([$0: unsupported language: "$1"])])])dnl
-])# LT_LANG
-
-
-# _LT_LANG(LANGNAME)
-# ------------------
-m4_defun([_LT_LANG],
-[m4_ifdef([_LT_LANG_]$1[_enabled], [],
-  [LT_SUPPORTED_TAG([$1])dnl
-  m4_append([_LT_TAGS], [$1 ])dnl
-  m4_define([_LT_LANG_]$1[_enabled], [])dnl
-  _LT_LANG_$1_CONFIG($1)])dnl
-])# _LT_LANG
-
-
-# _LT_LANG_DEFAULT_CONFIG
-# -----------------------
-m4_defun([_LT_LANG_DEFAULT_CONFIG],
-[AC_PROVIDE_IFELSE([AC_PROG_CXX],
-  [LT_LANG(CXX)],
-  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])
-
-AC_PROVIDE_IFELSE([AC_PROG_F77],
-  [LT_LANG(F77)],
-  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])
-
-AC_PROVIDE_IFELSE([AC_PROG_FC],
-  [LT_LANG(FC)],
-  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])
-
-dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal
-dnl pulling things in needlessly.
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],
-  [LT_LANG(GCJ)],
-  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
-    [LT_LANG(GCJ)],
-    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],
-      [LT_LANG(GCJ)],
-      [m4_ifdef([AC_PROG_GCJ],
-	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])
-       m4_ifdef([A][M_PROG_GCJ],
-	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])
-       m4_ifdef([LT_PROG_GCJ],
-	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])
-
-AC_PROVIDE_IFELSE([LT_PROG_RC],
-  [LT_LANG(RC)],
-  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])
-])# _LT_LANG_DEFAULT_CONFIG
-
-# Obsolete macros:
-AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])
-AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])
-AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])
-AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_CXX], [])
-dnl AC_DEFUN([AC_LIBTOOL_F77], [])
-dnl AC_DEFUN([AC_LIBTOOL_FC], [])
-dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])
-
-
-# _LT_TAG_COMPILER
-# ----------------
-m4_defun([_LT_TAG_COMPILER],
-[AC_REQUIRE([AC_PROG_CC])dnl
-
-_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl
-_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl
-_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl
-_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl
-
-# If no C compiler was specified, use CC.
-LTCC=${LTCC-"$CC"}
-
-# If no C compiler flags were specified, use CFLAGS.
-LTCFLAGS=${LTCFLAGS-"$CFLAGS"}
-
-# Allow CC to be a program name with arguments.
-compiler=$CC
-])# _LT_TAG_COMPILER
-
-
-# _LT_COMPILER_BOILERPLATE
-# ------------------------
-# Check for compiler boilerplate output or warnings with
-# the simple compiler test code.
-m4_defun([_LT_COMPILER_BOILERPLATE],
-[m4_require([_LT_DECL_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_compile_test_code" >conftest.$ac_ext
-eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_compiler_boilerplate=`cat conftest.err`
-$RM conftest*
-])# _LT_COMPILER_BOILERPLATE
-
-
-# _LT_LINKER_BOILERPLATE
-# ----------------------
-# Check for linker boilerplate output or warnings with
-# the simple link test code.
-m4_defun([_LT_LINKER_BOILERPLATE],
-[m4_require([_LT_DECL_SED])dnl
-ac_outfile=conftest.$ac_objext
-echo "$lt_simple_link_test_code" >conftest.$ac_ext
-eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err
-_lt_linker_boilerplate=`cat conftest.err`
-$RM -r conftest*
-])# _LT_LINKER_BOILERPLATE
-
-# _LT_REQUIRED_DARWIN_CHECKS
-# -------------------------
-m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[
-  case $host_os in
-    rhapsody* | darwin*)
-    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])
-    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])
-    AC_CHECK_TOOL([LIPO], [lipo], [:])
-    AC_CHECK_TOOL([OTOOL], [otool], [:])
-    AC_CHECK_TOOL([OTOOL64], [otool64], [:])
-    _LT_DECL([], [DSYMUTIL], [1],
-      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])
-    _LT_DECL([], [NMEDIT], [1],
-      [Tool to change global to local symbols on Mac OS X])
-    _LT_DECL([], [LIPO], [1],
-      [Tool to manipulate fat objects and archives on Mac OS X])
-    _LT_DECL([], [OTOOL], [1],
-      [ldd/readelf like tool for Mach-O binaries on Mac OS X])
-    _LT_DECL([], [OTOOL64], [1],
-      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])
-
-    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
-      [lt_cv_apple_cc_single_mod=no
-      if test -z "${LT_MULTI_MODULE}"; then
-	# By default we will add the -single_module flag. You can override
-	# by either setting the environment variable LT_MULTI_MODULE
-	# non-empty at configure time, or by adding -multi_module to the
-	# link flags.
-	rm -rf libconftest.dylib*
-	echo "int foo(void){return 1;}" > conftest.c
-	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
--dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD
-	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \
-	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err
-        _lt_result=$?
-	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then
-	  lt_cv_apple_cc_single_mod=yes
-	else
-	  cat conftest.err >&AS_MESSAGE_LOG_FD
-	fi
-	rm -rf libconftest.dylib*
-	rm -f conftest.*
-      fi])
-    AC_CACHE_CHECK([for -exported_symbols_list linker flag],
-      [lt_cv_ld_exported_symbols_list],
-      [lt_cv_ld_exported_symbols_list=no
-      save_LDFLAGS=$LDFLAGS
-      echo "_main" > conftest.sym
-      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"
-      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-	[lt_cv_ld_exported_symbols_list=yes],
-	[lt_cv_ld_exported_symbols_list=no])
-	LDFLAGS="$save_LDFLAGS"
-    ])
-    case $host_os in
-    rhapsody* | darwin1.[[012]])
-      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
-    darwin1.*)
-      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-    darwin*) # darwin 5.x on
-      # if running on 10.5 or later, the deployment target defaults
-      # to the OS version, if on x86, and 10.4, the deployment
-      # target defaults to 10.4. Don't you love it?
-      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
-	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-	10.[[012]]*)
-	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
-	10.*)
-	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
-      esac
-    ;;
-  esac
-    if test "$lt_cv_apple_cc_single_mod" = "yes"; then
-      _lt_dar_single_mod='$single_module'
-    fi
-    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
-      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
-    else
-      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
-    fi
-    if test "$DSYMUTIL" != ":"; then
-      _lt_dsymutil='~$DSYMUTIL $lib || :'
-    else
-      _lt_dsymutil=
-    fi
-    ;;
-  esac
-])
-
-
-# _LT_DARWIN_LINKER_FEATURES
-# --------------------------
-# Checks for linker and compiler features on darwin
-m4_defun([_LT_DARWIN_LINKER_FEATURES],
-[
-  m4_require([_LT_REQUIRED_DARWIN_CHECKS])
-  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-  _LT_TAGVAR(hardcode_direct, $1)=no
-  _LT_TAGVAR(hardcode_automatic, $1)=yes
-  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  _LT_TAGVAR(whole_archive_flag_spec, $1)=''
-  _LT_TAGVAR(link_all_deplibs, $1)=yes
-  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
-  case $cc_basename in
-     ifort*) _lt_dar_can_shared=yes ;;
-     *) _lt_dar_can_shared=$GCC ;;
-  esac
-  if test "$_lt_dar_can_shared" = "yes"; then
-    output_verbose_link_cmd=echo
-    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
-    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
-    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
-    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
-    m4_if([$1], [CXX],
-[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then
-      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
-      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
-    fi
-],[])
-  else
-  _LT_TAGVAR(ld_shlibs, $1)=no
-  fi
-])
-
-# _LT_SYS_MODULE_PATH_AIX
-# -----------------------
-# Links a minimal program and checks the executable
-# for the system default hardcoded library path. In most cases,
-# this is /usr/lib:/lib, but when the MPI compilers are used
-# the location of the communication and MPI libs are included too.
-# If we don't find anything, use the default library path according
-# to the aix ld manual.
-m4_defun([_LT_SYS_MODULE_PATH_AIX],
-[m4_require([_LT_DECL_SED])dnl
-AC_LINK_IFELSE(AC_LANG_PROGRAM,[
-lt_aix_libpath_sed='
-    /Import File Strings/,/^$/ {
-	/^0/ {
-	    s/^0  *\(.*\)$/\1/
-	    p
-	}
-    }'
-aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-# Check for a 64-bit object if we didn't find anything.
-if test -z "$aix_libpath"; then
-  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
-fi],[])
-if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
-])# _LT_SYS_MODULE_PATH_AIX
-
-
-# _LT_SHELL_INIT(ARG)
-# -------------------
-m4_define([_LT_SHELL_INIT],
-[ifdef([AC_DIVERSION_NOTICE],
-	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],
-	 [AC_DIVERT_PUSH(NOTICE)])
-$1
-AC_DIVERT_POP
-])# _LT_SHELL_INIT
-
-
-# _LT_PROG_ECHO_BACKSLASH
-# -----------------------
-# Add some code to the start of the generated configure script which
-# will find an echo command which doesn't interpret backslashes.
-m4_defun([_LT_PROG_ECHO_BACKSLASH],
-[_LT_SHELL_INIT([
-# Check that we are running under the correct shell.
-SHELL=${CONFIG_SHELL-/bin/sh}
-
-case X$lt_ECHO in
-X*--fallback-echo)
-  # Remove one level of quotation (which was required for Make).
-  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`
-  ;;
-esac
-
-ECHO=${lt_ECHO-echo}
-if test "X[$]1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X[$]1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then
-  # Yippee, $ECHO works!
-  :
-else
-  # Restart under the correct shell.
-  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}
-fi
-
-if test "X[$]1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<_LT_EOF
-[$]*
-_LT_EOF
-  exit 0
-fi
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-if test -z "$lt_ECHO"; then
-  if test "X${echo_test_string+set}" != Xset; then
-    # find a string as large as possible, as long as the shell can cope with it
-    for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do
-      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
-      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&
-	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null
-      then
-        break
-      fi
-    done
-  fi
-
-  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
-     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
-     test "X$echo_testing_string" = "X$echo_test_string"; then
-    :
-  else
-    # The Solaris, AIX, and Digital Unix default echo programs unquote
-    # backslashes.  This makes it impossible to quote backslashes using
-    #   echo "$something" | sed 's/\\/\\\\/g'
-    #
-    # So, first we look for a working echo in the user's PATH.
-
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for dir in $PATH /usr/ucb; do
-      IFS="$lt_save_ifs"
-      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
-         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
-         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
-         test "X$echo_testing_string" = "X$echo_test_string"; then
-        ECHO="$dir/echo"
-        break
-      fi
-    done
-    IFS="$lt_save_ifs"
-
-    if test "X$ECHO" = Xecho; then
-      # We didn't find a better echo, so look for alternatives.
-      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&
-         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&
-         test "X$echo_testing_string" = "X$echo_test_string"; then
-        # This shell has a builtin print -r that does the trick.
-        ECHO='print -r'
-      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&
-	   test "X$CONFIG_SHELL" != X/bin/ksh; then
-        # If we have ksh, try running configure again with it.
-        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-        export ORIGINAL_CONFIG_SHELL
-        CONFIG_SHELL=/bin/ksh
-        export CONFIG_SHELL
-        exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}
-      else
-        # Try using printf.
-        ECHO='printf %s\n'
-        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&
-	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&
-	   test "X$echo_testing_string" = "X$echo_test_string"; then
-	  # Cool, printf works
-	  :
-        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	     test "X$echo_testing_string" = 'X\t' &&
-	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	     test "X$echo_testing_string" = "X$echo_test_string"; then
-	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
-	  export CONFIG_SHELL
-	  SHELL="$CONFIG_SHELL"
-	  export SHELL
-	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
-        elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&
-	     test "X$echo_testing_string" = 'X\t' &&
-	     echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
-	     test "X$echo_testing_string" = "X$echo_test_string"; then
-	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"
-        else
-	  # maybe with a smaller string...
-	  prev=:
-
-	  for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do
-	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null
-	    then
-	      break
-	    fi
-	    prev="$cmd"
-	  done
-
-	  if test "$prev" != 'sed 50q "[$]0"'; then
-	    echo_test_string=`eval $prev`
-	    export echo_test_string
-	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}
-	  else
-	    # Oops.  We lost completely, so just stick with echo.
-	    ECHO=echo
-	  fi
-        fi
-      fi
-    fi
-  fi
-fi
-
-# Copy echo and quote the copy suitably for passing to libtool from
-# the Makefile, instead of quoting the original, which is used later.
-lt_ECHO=$ECHO
-if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then
-   lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"
-fi
-
-AC_SUBST(lt_ECHO)
-])
-_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])
-_LT_DECL([], [ECHO], [1],
-    [An echo program that does not interpret backslashes])
-])# _LT_PROG_ECHO_BACKSLASH
-
-
-# _LT_ENABLE_LOCK
-# ---------------
-m4_defun([_LT_ENABLE_LOCK],
-[AC_ARG_ENABLE([libtool-lock],
-  [AS_HELP_STRING([--disable-libtool-lock],
-    [avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case $host in
-ia64-*-hpux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.$ac_objext` in
-      *ELF-32*)
-	HPUX_IA64_MODE="32"
-	;;
-      *ELF-64*)
-	HPUX_IA64_MODE="64"
-	;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-*-*-irix6*)
-  # Find out which ABI we are using.
-  echo '[#]line __oline__ "configure"' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    if test "$lt_cv_prog_gnu_ld" = yes; then
-      case `/usr/bin/file conftest.$ac_objext` in
-	*32-bit*)
-	  LD="${LD-ld} -melf32bsmip"
-	  ;;
-	*N32*)
-	  LD="${LD-ld} -melf32bmipn32"
-	  ;;
-	*64-bit*)
-	  LD="${LD-ld} -melf64bmip"
-	;;
-      esac
-    else
-      case `/usr/bin/file conftest.$ac_objext` in
-	*32-bit*)
-	  LD="${LD-ld} -32"
-	  ;;
-	*N32*)
-	  LD="${LD-ld} -n32"
-	  ;;
-	*64-bit*)
-	  LD="${LD-ld} -64"
-	  ;;
-      esac
-    fi
-  fi
-  rm -rf conftest*
-  ;;
-
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
-s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.o` in
-      *32-bit*)
-	case $host in
-	  x86_64-*kfreebsd*-gnu)
-	    LD="${LD-ld} -m elf_i386_fbsd"
-	    ;;
-	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_i386"
-	    ;;
-	  ppc64-*linux*|powerpc64-*linux*)
-	    LD="${LD-ld} -m elf32ppclinux"
-	    ;;
-	  s390x-*linux*)
-	    LD="${LD-ld} -m elf_s390"
-	    ;;
-	  sparc64-*linux*)
-	    LD="${LD-ld} -m elf32_sparc"
-	    ;;
-	esac
-	;;
-      *64-bit*)
-	case $host in
-	  x86_64-*kfreebsd*-gnu)
-	    LD="${LD-ld} -m elf_x86_64_fbsd"
-	    ;;
-	  x86_64-*linux*)
-	    LD="${LD-ld} -m elf_x86_64"
-	    ;;
-	  ppc*-*linux*|powerpc*-*linux*)
-	    LD="${LD-ld} -m elf64ppc"
-	    ;;
-	  s390*-*linux*|s390*-*tpf*)
-	    LD="${LD-ld} -m elf64_s390"
-	    ;;
-	  sparc*-*linux*)
-	    LD="${LD-ld} -m elf64_sparc"
-	    ;;
-	esac
-	;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  SAVE_CFLAGS="$CFLAGS"
-  CFLAGS="$CFLAGS -belf"
-  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
-    [AC_LANG_PUSH(C)
-     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
-     AC_LANG_POP])
-  if test x"$lt_cv_cc_needs_belf" != x"yes"; then
-    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
-    CFLAGS="$SAVE_CFLAGS"
-  fi
-  ;;
-sparc*-*solaris*)
-  # Find out which ABI we are using.
-  echo 'int i;' > conftest.$ac_ext
-  if AC_TRY_EVAL(ac_compile); then
-    case `/usr/bin/file conftest.o` in
-    *64-bit*)
-      case $lt_cv_prog_gnu_ld in
-      yes*) LD="${LD-ld} -m elf64_sparc" ;;
-      *)
-	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then
-	  LD="${LD-ld} -64"
-	fi
-	;;
-      esac
-      ;;
-    esac
-  fi
-  rm -rf conftest*
-  ;;
-esac
-
-need_locks="$enable_libtool_lock"
-])# _LT_ENABLE_LOCK
-
-
-# _LT_CMD_OLD_ARCHIVE
-# -------------------
-m4_defun([_LT_CMD_OLD_ARCHIVE],
-[AC_CHECK_TOOL(AR, ar, false)
-test -z "$AR" && AR=ar
-test -z "$AR_FLAGS" && AR_FLAGS=cru
-_LT_DECL([], [AR], [1], [The archiver])
-_LT_DECL([], [AR_FLAGS], [1])
-
-AC_CHECK_TOOL(STRIP, strip, :)
-test -z "$STRIP" && STRIP=:
-_LT_DECL([], [STRIP], [1], [A symbol stripping program])
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-test -z "$RANLIB" && RANLIB=:
-_LT_DECL([], [RANLIB], [1],
-    [Commands used to install an old-style archive])
-
-# Determine commands to create old-style static archives.
-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'
-old_postinstall_cmds='chmod 644 $oldlib'
-old_postuninstall_cmds=
-
-if test -n "$RANLIB"; then
-  case $host_os in
-  openbsd*)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"
-    ;;
-  *)
-    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"
-    ;;
-  esac
-  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
-fi
-_LT_DECL([], [old_postinstall_cmds], [2])
-_LT_DECL([], [old_postuninstall_cmds], [2])
-_LT_TAGDECL([], [old_archive_cmds], [2],
-    [Commands used to build an old-style archive])
-])# _LT_CMD_OLD_ARCHIVE
-
-
-# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------------------
-# Check whether the given compiler option works
-AC_DEFUN([_LT_COMPILER_OPTION],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-   lt_compiler_flag="$3"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   # The option is referenced via a variable to avoid confusing sed.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-   (eval "$lt_compile" 2>conftest.err)
-   ac_status=$?
-   cat conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   if (exit $ac_status) && test -s "$ac_outfile"; then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings other than the usual output.
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp
-     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then
-       $2=yes
-     fi
-   fi
-   $RM conftest*
-])
-
-if test x"[$]$2" = xyes; then
-    m4_if([$5], , :, [$5])
-else
-    m4_if([$6], , :, [$6])
-fi
-])# _LT_COMPILER_OPTION
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])
-
-
-# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,
-#                  [ACTION-SUCCESS], [ACTION-FAILURE])
-# ----------------------------------------------------
-# Check whether the given linker option works
-AC_DEFUN([_LT_LINKER_OPTION],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_CACHE_CHECK([$1], [$2],
-  [$2=no
-   save_LDFLAGS="$LDFLAGS"
-   LDFLAGS="$LDFLAGS $3"
-   echo "$lt_simple_link_test_code" > conftest.$ac_ext
-   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
-     # The linker can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     if test -s conftest.err; then
-       # Append any errors to the config.log.
-       cat conftest.err 1>&AS_MESSAGE_LOG_FD
-       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp
-       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2
-       if diff conftest.exp conftest.er2 >/dev/null; then
-         $2=yes
-       fi
-     else
-       $2=yes
-     fi
-   fi
-   $RM -r conftest*
-   LDFLAGS="$save_LDFLAGS"
-])
-
-if test x"[$]$2" = xyes; then
-    m4_if([$4], , :, [$4])
-else
-    m4_if([$5], , :, [$5])
-fi
-])# _LT_LINKER_OPTION
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])
-
-
-# LT_CMD_MAX_LEN
-#---------------
-AC_DEFUN([LT_CMD_MAX_LEN],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-# find the maximum length of command line arguments
-AC_MSG_CHECKING([the maximum length of command line arguments])
-AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
-  i=0
-  teststring="ABCD"
-
-  case $build_os in
-  msdosdjgpp*)
-    # On DJGPP, this test can blow up pretty badly due to problems in libc
-    # (any single argument exceeding 2000 bytes causes a buffer overrun
-    # during glob expansion).  Even if it were fixed, the result of this
-    # check would be larger than it should be.
-    lt_cv_sys_max_cmd_len=12288;    # 12K is about right
-    ;;
-
-  gnu*)
-    # Under GNU Hurd, this test is not required because there is
-    # no limit to the length of command line arguments.
-    # Libtool will interpret -1 as no limit whatsoever
-    lt_cv_sys_max_cmd_len=-1;
-    ;;
-
-  cygwin* | mingw* | cegcc*)
-    # On Win9x/ME, this test blows up -- it succeeds, but takes
-    # about 5 minutes as the teststring grows exponentially.
-    # Worse, since 9x/ME are not pre-emptively multitasking,
-    # you end up with a "frozen" computer, even though with patience
-    # the test eventually succeeds (with a max line length of 256k).
-    # Instead, let's just punt: use the minimum linelength reported by
-    # all of the supported platforms: 8192 (on NT/2K/XP).
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  amigaos*)
-    # On AmigaOS with pdksh, this test takes hours, literally.
-    # So we just punt and use a minimum line length of 8192.
-    lt_cv_sys_max_cmd_len=8192;
-    ;;
-
-  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
-    # This has been around since 386BSD, at least.  Likely further.
-    if test -x /sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
-    elif test -x /usr/sbin/sysctl; then
-      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`
-    else
-      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs
-    fi
-    # And add a safety zone
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    ;;
-
-  interix*)
-    # We know the value 262144 and hardcode it with a safety zone (like BSD)
-    lt_cv_sys_max_cmd_len=196608
-    ;;
-
-  osf*)
-    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure
-    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not
-    # nice to cause kernel panics so lets avoid the loop below.
-    # First set a reasonable default.
-    lt_cv_sys_max_cmd_len=16384
-    #
-    if test -x /sbin/sysconfig; then
-      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in
-        *1*) lt_cv_sys_max_cmd_len=-1 ;;
-      esac
-    fi
-    ;;
-  sco3.2v5*)
-    lt_cv_sys_max_cmd_len=102400
-    ;;
-  sysv5* | sco5v6* | sysv4.2uw2*)
-    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`
-    if test -n "$kargmax"; then
-      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`
-    else
-      lt_cv_sys_max_cmd_len=32768
-    fi
-    ;;
-  *)
-    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
-    if test -n "$lt_cv_sys_max_cmd_len"; then
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
-    else
-      # Make teststring a little bigger before we do anything with it.
-      # a 1K string should be a reasonable start.
-      for i in 1 2 3 4 5 6 7 8 ; do
-        teststring=$teststring$teststring
-      done
-      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
-      # If test is not a shell built-in, we'll probably end up computing a
-      # maximum length that is only half of the actual maximum length, but
-      # we can't tell.
-      while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \
-	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&
-	      test $i != 17 # 1/2 MB should be enough
-      do
-        i=`expr $i + 1`
-        teststring=$teststring$teststring
-      done
-      # Only check the string length outside the loop.
-      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`
-      teststring=
-      # Add a significant safety factor because C++ compilers can tack on
-      # massive amounts of additional arguments before passing them to the
-      # linker.  It appears as though 1/2 is a usable value.
-      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
-    fi
-    ;;
-  esac
-])
-if test -n $lt_cv_sys_max_cmd_len ; then
-  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
-else
-  AC_MSG_RESULT(none)
-fi
-max_cmd_len=$lt_cv_sys_max_cmd_len
-_LT_DECL([], [max_cmd_len], [0],
-    [What is the maximum length of a command?])
-])# LT_CMD_MAX_LEN
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])
-
-
-# _LT_HEADER_DLFCN
-# ----------------
-m4_defun([_LT_HEADER_DLFCN],
-[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl
-])# _LT_HEADER_DLFCN
-
-
-# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,
-#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)
-# ----------------------------------------------------------------
-m4_defun([_LT_TRY_DLOPEN_SELF],
-[m4_require([_LT_HEADER_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
-  [$4]
-else
-  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
-  lt_status=$lt_dlunknown
-  cat > conftest.$ac_ext <<_LT_EOF
-[#line __oline__ "configure"
-#include "confdefs.h"
-
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-#  define LT_DLGLOBAL		RTLD_GLOBAL
-#else
-#  ifdef DL_GLOBAL
-#    define LT_DLGLOBAL		DL_GLOBAL
-#  else
-#    define LT_DLGLOBAL		0
-#  endif
-#endif
-
-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
-   find out it does not work in some platform. */
-#ifndef LT_DLLAZY_OR_NOW
-#  ifdef RTLD_LAZY
-#    define LT_DLLAZY_OR_NOW		RTLD_LAZY
-#  else
-#    ifdef DL_LAZY
-#      define LT_DLLAZY_OR_NOW		DL_LAZY
-#    else
-#      ifdef RTLD_NOW
-#        define LT_DLLAZY_OR_NOW	RTLD_NOW
-#      else
-#        ifdef DL_NOW
-#          define LT_DLLAZY_OR_NOW	DL_NOW
-#        else
-#          define LT_DLLAZY_OR_NOW	0
-#        endif
-#      endif
-#    endif
-#  endif
-#endif
-
-void fnord() { int i=42;}
-int main ()
-{
-  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
-  int status = $lt_dlunknown;
-
-  if (self)
-    {
-      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;
-      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
-      /* dlclose (self); */
-    }
-  else
-    puts (dlerror ());
-
-  return status;
-}]
-_LT_EOF
-  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
-    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
-    lt_status=$?
-    case x$lt_status in
-      x$lt_dlno_uscore) $1 ;;
-      x$lt_dlneed_uscore) $2 ;;
-      x$lt_dlunknown|x*) $3 ;;
-    esac
-  else :
-    # compilation failed
-    $3
-  fi
-fi
-rm -fr conftest*
-])# _LT_TRY_DLOPEN_SELF
-
-
-# LT_SYS_DLOPEN_SELF
-# ------------------
-AC_DEFUN([LT_SYS_DLOPEN_SELF],
-[m4_require([_LT_HEADER_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
-  enable_dlopen=unknown
-  enable_dlopen_self=unknown
-  enable_dlopen_self_static=unknown
-else
-  lt_cv_dlopen=no
-  lt_cv_dlopen_libs=
-
-  case $host_os in
-  beos*)
-    lt_cv_dlopen="load_add_on"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ;;
-
-  mingw* | pw32* | cegcc*)
-    lt_cv_dlopen="LoadLibrary"
-    lt_cv_dlopen_libs=
-    ;;
-
-  cygwin*)
-    lt_cv_dlopen="dlopen"
-    lt_cv_dlopen_libs=
-    ;;
-
-  darwin*)
-  # if libdl is installed we need to link against it
-    AC_CHECK_LIB([dl], [dlopen],
-		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
-    lt_cv_dlopen="dyld"
-    lt_cv_dlopen_libs=
-    lt_cv_dlopen_self=yes
-    ])
-    ;;
-
-  *)
-    AC_CHECK_FUNC([shl_load],
-	  [lt_cv_dlopen="shl_load"],
-      [AC_CHECK_LIB([dld], [shl_load],
-	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
-	[AC_CHECK_FUNC([dlopen],
-	      [lt_cv_dlopen="dlopen"],
-	  [AC_CHECK_LIB([dl], [dlopen],
-		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
-	    [AC_CHECK_LIB([svld], [dlopen],
-		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
-	      [AC_CHECK_LIB([dld], [dld_link],
-		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
-	      ])
-	    ])
-	  ])
-	])
-      ])
-    ;;
-  esac
-
-  if test "x$lt_cv_dlopen" != xno; then
-    enable_dlopen=yes
-  else
-    enable_dlopen=no
-  fi
-
-  case $lt_cv_dlopen in
-  dlopen)
-    save_CPPFLAGS="$CPPFLAGS"
-    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
-
-    save_LDFLAGS="$LDFLAGS"
-    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
-
-    save_LIBS="$LIBS"
-    LIBS="$lt_cv_dlopen_libs $LIBS"
-
-    AC_CACHE_CHECK([whether a program can dlopen itself],
-	  lt_cv_dlopen_self, [dnl
-	  _LT_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,
-	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
-    ])
-
-    if test "x$lt_cv_dlopen_self" = xyes; then
-      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
-	  lt_cv_dlopen_self_static, [dnl
-	  _LT_TRY_DLOPEN_SELF(
-	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,
-	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)
-      ])
-    fi
-
-    CPPFLAGS="$save_CPPFLAGS"
-    LDFLAGS="$save_LDFLAGS"
-    LIBS="$save_LIBS"
-    ;;
-  esac
-
-  case $lt_cv_dlopen_self in
-  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
-  *) enable_dlopen_self=unknown ;;
-  esac
-
-  case $lt_cv_dlopen_self_static in
-  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
-  *) enable_dlopen_self_static=unknown ;;
-  esac
-fi
-_LT_DECL([dlopen_support], [enable_dlopen], [0],
-	 [Whether dlopen is supported])
-_LT_DECL([dlopen_self], [enable_dlopen_self], [0],
-	 [Whether dlopen of programs is supported])
-_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],
-	 [Whether dlopen of statically linked programs is supported])
-])# LT_SYS_DLOPEN_SELF
-
-# Old name:
-AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])
-
-
-# _LT_COMPILER_C_O([TAGNAME])
-# ---------------------------
-# Check to see if options -c and -o are simultaneously supported by compiler.
-# This macro does not hard code the compiler like AC_PROG_CC_C_O.
-m4_defun([_LT_COMPILER_C_O],
-[m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],
-  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],
-  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no
-   $RM -r conftest 2>/dev/null
-   mkdir conftest
-   cd conftest
-   mkdir out
-   echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-   lt_compiler_flag="-o out/conftest2.$ac_objext"
-   # Insert the option either (1) after the last *FLAGS variable, or
-   # (2) before a word containing "conftest.", or (3) at the end.
-   # Note that $ac_compile itself does not contain backslashes and begins
-   # with a dollar sign (not a hyphen), so the echo should work correctly.
-   lt_compile=`echo "$ac_compile" | $SED \
-   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
-   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \
-   -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)
-   (eval "$lt_compile" 2>out/conftest.err)
-   ac_status=$?
-   cat out/conftest.err >&AS_MESSAGE_LOG_FD
-   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   if (exit $ac_status) && test -s out/conftest2.$ac_objext
-   then
-     # The compiler can only warn and ignore the option if not recognized
-     # So say no if there are warnings
-     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp
-     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2
-     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then
-       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-     fi
-   fi
-   chmod u+w . 2>&AS_MESSAGE_LOG_FD
-   $RM conftest*
-   # SGI C++ compiler will create directory out/ii_files/ for
-   # template instantiation
-   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files
-   $RM out/* && rmdir out
-   cd ..
-   $RM -r conftest
-   $RM conftest*
-])
-_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],
-	[Does compiler simultaneously support -c and -o options?])
-])# _LT_COMPILER_C_O
-
-
-# _LT_COMPILER_FILE_LOCKS([TAGNAME])
-# ----------------------------------
-# Check to see if we can do hard links to lock some files if needed
-m4_defun([_LT_COMPILER_FILE_LOCKS],
-[m4_require([_LT_ENABLE_LOCK])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-_LT_COMPILER_C_O([$1])
-
-hard_links="nottested"
-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
-  # do not overwrite the value of need_locks provided by the user
-  AC_MSG_CHECKING([if we can lock with hard links])
-  hard_links=yes
-  $RM conftest*
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  touch conftest.a
-  ln conftest.a conftest.b 2>&5 || hard_links=no
-  ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  AC_MSG_RESULT([$hard_links])
-  if test "$hard_links" = no; then
-    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
-    need_locks=warn
-  fi
-else
-  need_locks=no
-fi
-_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])
-])# _LT_COMPILER_FILE_LOCKS
-
-
-# _LT_CHECK_OBJDIR
-# ----------------
-m4_defun([_LT_CHECK_OBJDIR],
-[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],
-[rm -f .libs 2>/dev/null
-mkdir .libs 2>/dev/null
-if test -d .libs; then
-  lt_cv_objdir=.libs
-else
-  # MS-DOS does not allow filenames that begin with a dot.
-  lt_cv_objdir=_libs
-fi
-rmdir .libs 2>/dev/null])
-objdir=$lt_cv_objdir
-_LT_DECL([], [objdir], [0],
-         [The name of the directory that contains temporary libtool files])dnl
-m4_pattern_allow([LT_OBJDIR])dnl
-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
-  [Define to the sub-directory in which libtool stores uninstalled libraries.])
-])# _LT_CHECK_OBJDIR
-
-
-# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])
-# --------------------------------------
-# Check hardcoding attributes.
-m4_defun([_LT_LINKER_HARDCODE_LIBPATH],
-[AC_MSG_CHECKING([how to hardcode library paths into programs])
-_LT_TAGVAR(hardcode_action, $1)=
-if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
-   test -n "$_LT_TAGVAR(runpath_var, $1)" ||
-   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
-
-  # We can hardcode non-existent directories.
-  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
-     # If the only mechanism to avoid hardcoding is shlibpath_var, we
-     # have to relink, otherwise we might link with an installed library
-     # when we should be linking with a yet-to-be-installed one
-     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
-     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
-    # Linking always hardcodes the temporary library directory.
-    _LT_TAGVAR(hardcode_action, $1)=relink
-  else
-    # We can link without hardcoding, and we can hardcode nonexisting dirs.
-    _LT_TAGVAR(hardcode_action, $1)=immediate
-  fi
-else
-  # We cannot hardcode anything, or else we can only hardcode existing
-  # directories.
-  _LT_TAGVAR(hardcode_action, $1)=unsupported
-fi
-AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
-
-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
-   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
-  # Fast installation is not supported
-  enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
-     test "$enable_shared" = no; then
-  # Fast installation is not necessary
-  enable_fast_install=needless
-fi
-_LT_TAGDECL([], [hardcode_action], [0],
-    [How to hardcode a shared library path into an executable])
-])# _LT_LINKER_HARDCODE_LIBPATH
-
-
-# _LT_CMD_STRIPLIB
-# ----------------
-m4_defun([_LT_CMD_STRIPLIB],
-[m4_require([_LT_DECL_EGREP])
-striplib=
-old_striplib=
-AC_MSG_CHECKING([whether stripping libraries is possible])
-if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then
-  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
-  test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  AC_MSG_RESULT([yes])
-else
-# FIXME - insert some real tests, host_os isn't really good enough
-  case $host_os in
-  darwin*)
-    if test -n "$STRIP" ; then
-      striplib="$STRIP -x"
-      old_striplib="$STRIP -S"
-      AC_MSG_RESULT([yes])
-    else
-      AC_MSG_RESULT([no])
-    fi
-    ;;
-  *)
-    AC_MSG_RESULT([no])
-    ;;
-  esac
-fi
-_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])
-_LT_DECL([], [striplib], [1])
-])# _LT_CMD_STRIPLIB
-
-
-# _LT_SYS_DYNAMIC_LINKER([TAG])
-# -----------------------------
-# PORTME Fill in your ld.so characteristics
-m4_defun([_LT_SYS_DYNAMIC_LINKER],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_OBJDUMP])dnl
-m4_require([_LT_DECL_SED])dnl
-AC_MSG_CHECKING([dynamic linker characteristics])
-m4_if([$1],
-	[], [
-if test "$GCC" = yes; then
-  case $host_os in
-    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
-    *) lt_awk_arg="/^libraries:/" ;;
-  esac
-  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then
-    # if the path contains ";" then we assume it to be the separator
-    # otherwise default to the standard path separator (i.e. ":") - it is
-    # assumed that no part of a normal pathname contains ";" but that should
-    # okay in the real world where ";" in dirpaths is itself problematic.
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`
-  else
-    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-  fi
-  # Ok, now we have the path, separated by spaces, we can step through it
-  # and add multilib dir if necessary.
-  lt_tmp_lt_search_path_spec=
-  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
-  for lt_sys_path in $lt_search_path_spec; do
-    if test -d "$lt_sys_path/$lt_multi_os_dir"; then
-      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
-    else
-      test -d "$lt_sys_path" && \
-	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
-    fi
-  done
-  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '
-BEGIN {RS=" "; FS="/|\n";} {
-  lt_foo="";
-  lt_count=0;
-  for (lt_i = NF; lt_i > 0; lt_i--) {
-    if ($lt_i != "" && $lt_i != ".") {
-      if ($lt_i == "..") {
-        lt_count++;
-      } else {
-        if (lt_count == 0) {
-          lt_foo="/" $lt_i lt_foo;
-        } else {
-          lt_count--;
-        }
-      }
-    }
-  }
-  if (lt_foo != "") { lt_freq[[lt_foo]]++; }
-  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }
-}'`
-  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`
-else
-  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
-fi])
-library_names_spec=
-libname_spec='lib$name'
-soname_spec=
-shrext_cmds=".so"
-postinstall_cmds=
-postuninstall_cmds=
-finish_cmds=
-finish_eval=
-shlibpath_var=
-shlibpath_overrides_runpath=unknown
-version_type=none
-dynamic_linker="$host_os ld.so"
-sys_lib_dlsearch_path_spec="/lib /usr/lib"
-need_lib_prefix=unknown
-hardcode_into_libs=no
-
-# when you set need_version to no, make sure it does not cause -set_version
-# flags to be left without arguments
-need_version=unknown
-
-case $host_os in
-aix3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
-  shlibpath_var=LIBPATH
-
-  # AIX 3 has no versioning support, so we append a major version to the name.
-  soname_spec='${libname}${release}${shared_ext}$major'
-  ;;
-
-aix[[4-9]]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  hardcode_into_libs=yes
-  if test "$host_cpu" = ia64; then
-    # AIX 5 supports IA64
-    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
-    shlibpath_var=LD_LIBRARY_PATH
-  else
-    # With GCC up to 2.95.x, collect2 would create an import file
-    # for dependence libraries.  The import file would start with
-    # the line `#! .'.  This would cause the generated library to
-    # depend on `.', always an invalid library.  This was fixed in
-    # development snapshots of GCC prior to 3.0.
-    case $host_os in
-      aix4 | aix4.[[01]] | aix4.[[01]].*)
-      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
-	   echo ' yes '
-	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
-	:
-      else
-	can_build_shared=no
-      fi
-      ;;
-    esac
-    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
-    # soname into executable. Probably we can add versioning support to
-    # collect2, so additional links can be useful in future.
-    if test "$aix_use_runtimelinking" = yes; then
-      # If using run time linking (on AIX 4.2 or later) use lib<name>.so
-      # instead of lib<name>.a to let people know that these are not
-      # typical AIX shared libraries.
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    else
-      # We preserve .a as extension for shared libraries through AIX4.2
-      # and later when we are not doing run time linking.
-      library_names_spec='${libname}${release}.a $libname.a'
-      soname_spec='${libname}${release}${shared_ext}$major'
-    fi
-    shlibpath_var=LIBPATH
-  fi
-  ;;
-
-amigaos*)
-  case $host_cpu in
-  powerpc)
-    # Since July 2007 AmigaOS4 officially supports .so libraries.
-    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    ;;
-  m68k)
-    library_names_spec='$libname.ixlibrary $libname.a'
-    # Create ${libname}_ixlibrary.a entries in /sys/libs.
-    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
-    ;;
-  esac
-  ;;
-
-beos*)
-  library_names_spec='${libname}${shared_ext}'
-  dynamic_linker="$host_os ld.so"
-  shlibpath_var=LIBRARY_PATH
-  ;;
-
-bsdi[[45]]*)
-  version_type=linux
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
-  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
-  # the default ld.so.conf also contains /usr/contrib/lib and
-  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
-  # libtool to hard-code these into programs
-  ;;
-
-cygwin* | mingw* | pw32* | cegcc*)
-  version_type=windows
-  shrext_cmds=".dll"
-  need_version=no
-  need_lib_prefix=no
-
-  case $GCC,$host_os in
-  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)
-    library_names_spec='$libname.dll.a'
-    # DLL is installed to $(libdir)/../bin by postinstall_cmds
-    postinstall_cmds='base_file=`basename \${file}`~
-      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
-      dldir=$destdir/`dirname \$dlpath`~
-      test -d \$dldir || mkdir -p \$dldir~
-      $install_prog $dir/$dlname \$dldir/$dlname~
-      chmod a+x \$dldir/$dlname~
-      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
-        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
-      fi'
-    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
-      dlpath=$dir/\$dldll~
-       $RM \$dlpath'
-    shlibpath_overrides_runpath=yes
-
-    case $host_os in
-    cygwin*)
-      # Cygwin DLLs use 'cyg' prefix rather than 'lib'
-      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
-      ;;
-    mingw* | cegcc*)
-      # MinGW DLLs use traditional 'lib' prefix
-      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
-      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
-        # It is most probably a Windows format PATH printed by
-        # mingw gcc, but we are running on Cygwin. Gcc prints its search
-        # path with ; separators, and with drive letters. We can handle the
-        # drive letters (cygwin fileutils understands them), so leave them,
-        # especially as we might pass files found there to a mingw objdump,
-        # which wouldn't understand a cygwinified path. Ahh.
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
-      else
-        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`
-      fi
-      ;;
-    pw32*)
-      # pw32 DLLs use 'pw' prefix rather than 'lib'
-      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
-      ;;
-    esac
-    ;;
-
-  *)
-    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
-    ;;
-  esac
-  dynamic_linker='Win32 ld.exe'
-  # FIXME: first we should search . and the directory the executable is in
-  shlibpath_var=PATH
-  ;;
-
-darwin* | rhapsody*)
-  dynamic_linker="$host_os dyld"
-  version_type=darwin
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
-  soname_spec='${libname}${release}${major}$shared_ext'
-  shlibpath_overrides_runpath=yes
-  shlibpath_var=DYLD_LIBRARY_PATH
-  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
-m4_if([$1], [],[
-  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])
-  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
-  ;;
-
-dgux*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
-freebsd* | dragonfly*)
-  # DragonFly does not have aout.  When/if they implement a new
-  # versioning mechanism, adjust this.
-  if test -x /usr/bin/objformat; then
-    objformat=`/usr/bin/objformat`
-  else
-    case $host_os in
-    freebsd[[123]]*) objformat=aout ;;
-    *) objformat=elf ;;
-    esac
-  fi
-  version_type=freebsd-$objformat
-  case $version_type in
-    freebsd-elf*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-      need_version=no
-      need_lib_prefix=no
-      ;;
-    freebsd-*)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
-      need_version=yes
-      ;;
-  esac
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_os in
-  freebsd2*)
-    shlibpath_overrides_runpath=yes
-    ;;
-  freebsd3.[[01]]* | freebsdelf3.[[01]]*)
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \
-  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)
-    shlibpath_overrides_runpath=no
-    hardcode_into_libs=yes
-    ;;
-  *) # from 4.6 on, and DragonFly
-    shlibpath_overrides_runpath=yes
-    hardcode_into_libs=yes
-    ;;
-  esac
-  ;;
-
-gnu*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  hardcode_into_libs=yes
-  ;;
-
-hpux9* | hpux10* | hpux11*)
-  # Give a soname corresponding to the major version so that dld.sl refuses to
-  # link against other versions.
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  case $host_cpu in
-  ia64*)
-    shrext_cmds='.so'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.so"
-    shlibpath_var=LD_LIBRARY_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    if test "X$HPUX_IA64_MODE" = X32; then
-      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
-    else
-      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
-    fi
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-  hppa*64*)
-    shrext_cmds='.sl'
-    hardcode_into_libs=yes
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
-    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
-    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
-    ;;
-  *)
-    shrext_cmds='.sl'
-    dynamic_linker="$host_os dld.sl"
-    shlibpath_var=SHLIB_PATH
-    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    ;;
-  esac
-  # HP-UX runs *really* slowly unless shared libraries are mode 555.
-  postinstall_cmds='chmod 555 $lib'
-  ;;
-
-interix[[3-9]]*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $host_os in
-    nonstopux*) version_type=nonstopux ;;
-    *)
-	if test "$lt_cv_prog_gnu_ld" = yes; then
-		version_type=linux
-	else
-		version_type=irix
-	fi ;;
-  esac
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
-  case $host_os in
-  irix5* | nonstopux*)
-    libsuff= shlibsuff=
-    ;;
-  *)
-    case $LD in # libtool.m4 will add one of these switches to LD
-    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
-      libsuff= shlibsuff= libmagic=32-bit;;
-    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
-      libsuff=32 shlibsuff=N32 libmagic=N32;;
-    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
-      libsuff=64 shlibsuff=64 libmagic=64-bit;;
-    *) libsuff= shlibsuff= libmagic=never-match;;
-    esac
-    ;;
-  esac
-  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
-  shlibpath_overrides_runpath=no
-  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
-  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
-  hardcode_into_libs=yes
-  ;;
-
-# No shared lib support for Linux oldld, aout, or coff.
-linux*oldld* | linux*aout* | linux*coff*)
-  dynamic_linker=no
-  ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  # Some binutils ld are patched to set DT_RUNPATH
-  save_LDFLAGS=$LDFLAGS
-  save_libdir=$libdir
-  eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \
-       LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""
-  AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
-    [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],
-       [shlibpath_overrides_runpath=yes])])
-  LDFLAGS=$save_LDFLAGS
-  libdir=$save_libdir
-
-  # This implies no fast_install, which is unacceptable.
-  # Some rework will be needed to allow for fast_install
-  # before this can be enabled.
-  hardcode_into_libs=yes
-
-  # Append ld.so.conf contents to the search path
-  if test -f /etc/ld.so.conf; then
-    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`
-    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
-  fi
-
-  # We used to test for /lib/ld.so.1 and disable shared libraries on
-  # powerpc, because MkLinux only supported shared libraries with the
-  # GNU dynamic linker.  Since this was broken with cross compilers,
-  # most powerpc-linux boxes support dynamic linking these days and
-  # people can always --disable-shared, the test was removed, and we
-  # assume the GNU/Linux dynamic linker is in use.
-  dynamic_linker='GNU/Linux ld.so'
-  ;;
-
-netbsdelf*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='NetBSD ld.elf_so'
-  ;;
-
-netbsd*)
-  version_type=sunos
-  need_lib_prefix=no
-  need_version=no
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-    dynamic_linker='NetBSD (a.out) ld.so'
-  else
-    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-    soname_spec='${libname}${release}${shared_ext}$major'
-    dynamic_linker='NetBSD ld.elf_so'
-  fi
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  ;;
-
-newsos6)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  ;;
-
-*nto* | *qnx*)
-  version_type=qnx
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='ldqnx.so'
-  ;;
-
-openbsd*)
-  version_type=sunos
-  sys_lib_dlsearch_path_spec="/usr/lib"
-  need_lib_prefix=no
-  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
-  case $host_os in
-    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;
-    *)				need_version=no  ;;
-  esac
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    case $host_os in
-      openbsd2.[[89]] | openbsd2.[[89]].*)
-	shlibpath_overrides_runpath=no
-	;;
-      *)
-	shlibpath_overrides_runpath=yes
-	;;
-      esac
-  else
-    shlibpath_overrides_runpath=yes
-  fi
-  ;;
-
-os2*)
-  libname_spec='$name'
-  shrext_cmds=".dll"
-  need_lib_prefix=no
-  library_names_spec='$libname${shared_ext} $libname.a'
-  dynamic_linker='OS/2 ld.exe'
-  shlibpath_var=LIBPATH
-  ;;
-
-osf3* | osf4* | osf5*)
-  version_type=osf
-  need_lib_prefix=no
-  need_version=no
-  soname_spec='${libname}${release}${shared_ext}$major'
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
-  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
-  ;;
-
-rdos*)
-  dynamic_linker=no
-  ;;
-
-solaris*)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  # ldd complains unless libraries are executable
-  postinstall_cmds='chmod +x $lib'
-  ;;
-
-sunos4*)
-  version_type=sunos
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
-  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  if test "$with_gnu_ld" = yes; then
-    need_lib_prefix=no
-  fi
-  need_version=yes
-  ;;
-
-sysv4 | sysv4.3*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  case $host_vendor in
-    sni)
-      shlibpath_overrides_runpath=no
-      need_lib_prefix=no
-      runpath_var=LD_RUN_PATH
-      ;;
-    siemens)
-      need_lib_prefix=no
-      ;;
-    motorola)
-      need_lib_prefix=no
-      need_version=no
-      shlibpath_overrides_runpath=no
-      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
-      ;;
-  esac
-  ;;
-
-sysv4*MP*)
-  if test -d /usr/nec ;then
-    version_type=linux
-    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
-    soname_spec='$libname${shared_ext}.$major'
-    shlibpath_var=LD_LIBRARY_PATH
-  fi
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  version_type=freebsd-elf
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=yes
-  hardcode_into_libs=yes
-  if test "$with_gnu_ld" = yes; then
-    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
-  else
-    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
-    case $host_os in
-      sco3.2v5*)
-        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"
-	;;
-    esac
-  fi
-  sys_lib_dlsearch_path_spec='/usr/lib'
-  ;;
-
-tpf*)
-  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  ;;
-
-uts4*)
-  version_type=linux
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  ;;
-
-*)
-  dynamic_linker=no
-  ;;
-esac
-AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
-
-variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
-  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
-fi
-
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
-  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
-fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
-  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
-fi
-
-_LT_DECL([], [variables_saved_for_relink], [1],
-    [Variables whose values should be saved in libtool wrapper scripts and
-    restored at link time])
-_LT_DECL([], [need_lib_prefix], [0],
-    [Do we need the "lib" prefix for modules?])
-_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])
-_LT_DECL([], [version_type], [0], [Library versioning type])
-_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])
-_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])
-_LT_DECL([], [shlibpath_overrides_runpath], [0],
-    [Is shlibpath searched before the hard-coded library search path?])
-_LT_DECL([], [libname_spec], [1], [Format of library name prefix])
-_LT_DECL([], [library_names_spec], [1],
-    [[List of archive names.  First name is the real one, the rest are links.
-    The last name is the one that the linker finds with -lNAME]])
-_LT_DECL([], [soname_spec], [1],
-    [[The coded name of the library, if different from the real name]])
-_LT_DECL([], [postinstall_cmds], [2],
-    [Command to use after installation of a shared archive])
-_LT_DECL([], [postuninstall_cmds], [2],
-    [Command to use after uninstallation of a shared archive])
-_LT_DECL([], [finish_cmds], [2],
-    [Commands used to finish a libtool library installation in a directory])
-_LT_DECL([], [finish_eval], [1],
-    [[As "finish_cmds", except a single script fragment to be evaled but
-    not shown]])
-_LT_DECL([], [hardcode_into_libs], [0],
-    [Whether we should hardcode library paths into libraries])
-_LT_DECL([], [sys_lib_search_path_spec], [2],
-    [Compile-time system search path for libraries])
-_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
-    [Run-time system search path for libraries])
-])# _LT_SYS_DYNAMIC_LINKER
-
-
-# _LT_PATH_TOOL_PREFIX(TOOL)
-# --------------------------
-# find a file program which can recognize shared library
-AC_DEFUN([_LT_PATH_TOOL_PREFIX],
-[m4_require([_LT_DECL_EGREP])dnl
-AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
-[case $MAGIC_CMD in
-[[\\/*] |  ?:[\\/]*])
-  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
-  ;;
-*)
-  lt_save_MAGIC_CMD="$MAGIC_CMD"
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word.  This closes a longstanding sh security hole.
-  ac_dummy="m4_if([$2], , $PATH, [$2])"
-  for ac_dir in $ac_dummy; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f $ac_dir/$1; then
-      lt_cv_path_MAGIC_CMD="$ac_dir/$1"
-      if test -n "$file_magic_test_file"; then
-	case $deplibs_check_method in
-	"file_magic "*)
-	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
-	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
-	    $EGREP "$file_magic_regex" > /dev/null; then
-	    :
-	  else
-	    cat <<_LT_EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such.  This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem.  Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-_LT_EOF
-	  fi ;;
-	esac
-      fi
-      break
-    fi
-  done
-  IFS="$lt_save_ifs"
-  MAGIC_CMD="$lt_save_MAGIC_CMD"
-  ;;
-esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
-if test -n "$MAGIC_CMD"; then
-  AC_MSG_RESULT($MAGIC_CMD)
-else
-  AC_MSG_RESULT(no)
-fi
-_LT_DECL([], [MAGIC_CMD], [0],
-	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl
-])# _LT_PATH_TOOL_PREFIX
-
-# Old name:
-AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])
-
-
-# _LT_PATH_MAGIC
-# --------------
-# find a file program which can recognize a shared library
-m4_defun([_LT_PATH_MAGIC],
-[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
-if test -z "$lt_cv_path_MAGIC_CMD"; then
-  if test -n "$ac_tool_prefix"; then
-    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)
-  else
-    MAGIC_CMD=:
-  fi
-fi
-])# _LT_PATH_MAGIC
-
-
-# LT_PATH_LD
-# ----------
-# find the pathname to the GNU or non-GNU linker
-AC_DEFUN([LT_PATH_LD],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_DECL_EGREP])dnl
-
-AC_ARG_WITH([gnu-ld],
-    [AS_HELP_STRING([--with-gnu-ld],
-	[assume the C compiler uses GNU ld @<:@default=no@:>@])],
-    [test "$withval" = no || with_gnu_ld=yes],
-    [with_gnu_ld=no])dnl
-
-ac_prog=ld
-if test "$GCC" = yes; then
-  # Check if gcc -print-prog-name=ld gives a path.
-  AC_MSG_CHECKING([for ld used by $CC])
-  case $host in
-  *-*-mingw*)
-    # gcc leaves a trailing carriage return which upsets mingw
-    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
-  *)
-    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
-  esac
-  case $ac_prog in
-    # Accept absolute paths.
-    [[\\/]]* | ?:[[\\/]]*)
-      re_direlt='/[[^/]][[^/]]*/\.\./'
-      # Canonicalize the pathname of ld
-      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`
-      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
-	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
-      done
-      test -z "$LD" && LD="$ac_prog"
-      ;;
-  "")
-    # If it fails, then pretend we aren't using GCC.
-    ac_prog=ld
-    ;;
-  *)
-    # If it is relative, then search for the first ld in PATH.
-    with_gnu_ld=unknown
-    ;;
-  esac
-elif test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(lt_cv_path_LD,
-[if test -z "$LD"; then
-  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-  for ac_dir in $PATH; do
-    IFS="$lt_save_ifs"
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
-      lt_cv_path_LD="$ac_dir/$ac_prog"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some variants of GNU ld only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
-      *GNU* | *'with BFD'*)
-	test "$with_gnu_ld" != no && break
-	;;
-      *)
-	test "$with_gnu_ld" != yes && break
-	;;
-      esac
-    fi
-  done
-  IFS="$lt_save_ifs"
-else
-  lt_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$lt_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-_LT_PATH_LD_GNU
-AC_SUBST([LD])
-
-_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])
-])# LT_PATH_LD
-
-# Old names:
-AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])
-AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_PROG_LD], [])
-dnl AC_DEFUN([AC_PROG_LD], [])
-
-
-# _LT_PATH_LD_GNU
-#- --------------
-m4_defun([_LT_PATH_LD_GNU],
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU lds only accept -v.
-case `$LD -v 2>&1 </dev/null` in
-*GNU* | *'with BFD'*)
-  lt_cv_prog_gnu_ld=yes
-  ;;
-*)
-  lt_cv_prog_gnu_ld=no
-  ;;
-esac])
-with_gnu_ld=$lt_cv_prog_gnu_ld
-])# _LT_PATH_LD_GNU
-
-
-# _LT_CMD_RELOAD
-# --------------
-# find reload flag for linker
-#   -- PORTME Some linkers may need a different reload flag.
-m4_defun([_LT_CMD_RELOAD],
-[AC_CACHE_CHECK([for $LD option to reload object files],
-  lt_cv_ld_reload_flag,
-  [lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-case $reload_flag in
-"" | " "*) ;;
-*) reload_flag=" $reload_flag" ;;
-esac
-reload_cmds='$LD$reload_flag -o $output$reload_objs'
-case $host_os in
-  darwin*)
-    if test "$GCC" = yes; then
-      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
-    else
-      reload_cmds='$LD$reload_flag -o $output$reload_objs'
-    fi
-    ;;
-esac
-_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl
-_LT_DECL([], [reload_cmds], [2])dnl
-])# _LT_CMD_RELOAD
-
-
-# _LT_CHECK_MAGIC_METHOD
-# ----------------------
-# how to check for library dependencies
-#  -- PORTME fill in with the dynamic library characteristics
-m4_defun([_LT_CHECK_MAGIC_METHOD],
-[m4_require([_LT_DECL_EGREP])
-m4_require([_LT_DECL_OBJDUMP])
-AC_CACHE_CHECK([how to recognize dependent libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='$MAGIC_CMD'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case $host_os in
-aix[[4-9]]*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-beos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-bsdi[[45]]*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'
-  lt_cv_file_magic_cmd='/usr/bin/file -L'
-  lt_cv_file_magic_test_file=/shlib/libc.so
-  ;;
-
-cygwin*)
-  # func_win32_libid is a shell function defined in ltmain.sh
-  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-  lt_cv_file_magic_cmd='func_win32_libid'
-  ;;
-
-mingw* | pw32*)
-  # Base MSYS/MinGW do not provide the 'file' command needed by
-  # func_win32_libid shell function, so use a weaker test based on 'objdump',
-  # unless we find 'file', for example because we are cross-compiling.
-  if ( file / ) >/dev/null 2>&1; then
-    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
-    lt_cv_file_magic_cmd='func_win32_libid'
-  else
-    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
-    lt_cv_file_magic_cmd='$OBJDUMP -f'
-  fi
-  ;;
-
-cegcc)
-  # use the weaker test based on 'objdump'. See mingw*.
-  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'
-  lt_cv_file_magic_cmd='$OBJDUMP -f'
-  ;;
-
-darwin* | rhapsody*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-freebsd* | dragonfly*)
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
-    case $host_cpu in
-    i*86 )
-      # Not sure whether the presence of OpenBSD here was a mistake.
-      # Let's accept both of them until this is cleared up.
-      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'
-      lt_cv_file_magic_cmd=/usr/bin/file
-      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
-      ;;
-    esac
-  else
-    lt_cv_deplibs_check_method=pass_all
-  fi
-  ;;
-
-gnu*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-hpux10.20* | hpux11*)
-  lt_cv_file_magic_cmd=/usr/bin/file
-  case $host_cpu in
-  ia64*)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'
-    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
-    ;;
-  hppa*64*)
-    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']
-    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
-    ;;
-  *)
-    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'
-    lt_cv_file_magic_test_file=/usr/lib/libc.sl
-    ;;
-  esac
-  ;;
-
-interix[[3-9]]*)
-  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here
-  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'
-  ;;
-
-irix5* | irix6* | nonstopux*)
-  case $LD in
-  *-32|*"-32 ") libmagic=32-bit;;
-  *-n32|*"-n32 ") libmagic=N32;;
-  *-64|*"-64 ") libmagic=64-bit;;
-  *) libmagic=never-match;;
-  esac
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-# This must be Linux ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-netbsd* | netbsdelf*-gnu)
-  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'
-  fi
-  ;;
-
-newos6*)
-  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'
-  lt_cv_file_magic_cmd=/usr/bin/file
-  lt_cv_file_magic_test_file=/usr/lib/libnls.so
-  ;;
-
-*nto* | *qnx*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-openbsd*)
-  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
-  else
-    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
-  fi
-  ;;
-
-osf3* | osf4* | osf5*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-rdos*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-solaris*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-
-sysv4 | sysv4.3*)
-  case $host_vendor in
-  motorola)
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'
-    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
-    ;;
-  ncr)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  sequent)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'
-    ;;
-  sni)
-    lt_cv_file_magic_cmd='/bin/file'
-    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"
-    lt_cv_file_magic_test_file=/lib/libc.so
-    ;;
-  siemens)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  pc)
-    lt_cv_deplibs_check_method=pass_all
-    ;;
-  esac
-  ;;
-
-tpf*)
-  lt_cv_deplibs_check_method=pass_all
-  ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-test -z "$deplibs_check_method" && deplibs_check_method=unknown
-
-_LT_DECL([], [deplibs_check_method], [1],
-    [Method to check whether dependent libraries are shared objects])
-_LT_DECL([], [file_magic_cmd], [1],
-    [Command to use when deplibs_check_method == "file_magic"])
-])# _LT_CHECK_MAGIC_METHOD
-
-
-# LT_PATH_NM
-# ----------
-# find the pathname to a BSD- or MS-compatible name lister
-AC_DEFUN([LT_PATH_NM],
-[AC_REQUIRE([AC_PROG_CC])dnl
-AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
-[if test -n "$NM"; then
-  # Let the user override the test.
-  lt_cv_path_NM="$NM"
-else
-  lt_nm_to_check="${ac_tool_prefix}nm"
-  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
-    lt_nm_to_check="$lt_nm_to_check nm"
-  fi
-  for lt_tmp_nm in $lt_nm_to_check; do
-    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
-    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
-      IFS="$lt_save_ifs"
-      test -z "$ac_dir" && ac_dir=.
-      tmp_nm="$ac_dir/$lt_tmp_nm"
-      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
-	# Check to see if the nm accepts a BSD-compat flag.
-	# Adding the `sed 1q' prevents false positives on HP-UX, which says:
-	#   nm: unknown option "B" ignored
-	# Tru64's nm complains that /dev/null is an invalid object file
-	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
-	*/dev/null* | *'Invalid file or object type'*)
-	  lt_cv_path_NM="$tmp_nm -B"
-	  break
-	  ;;
-	*)
-	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
-	  */dev/null*)
-	    lt_cv_path_NM="$tmp_nm -p"
-	    break
-	    ;;
-	  *)
-	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
-	    continue # so that we can try to find one that supports BSD flags
-	    ;;
-	  esac
-	  ;;
-	esac
-      fi
-    done
-    IFS="$lt_save_ifs"
-  done
-  : ${lt_cv_path_NM=no}
-fi])
-if test "$lt_cv_path_NM" != "no"; then
-  NM="$lt_cv_path_NM"
-else
-  # Didn't find any BSD compatible name lister, look for dumpbin.
-  AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)
-  AC_SUBST([DUMPBIN])
-  if test "$DUMPBIN" != ":"; then
-    NM="$DUMPBIN"
-  fi
-fi
-test -z "$NM" && NM=nm
-AC_SUBST([NM])
-_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl
-
-AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],
-  [lt_cv_nm_interface="BSD nm"
-  echo "int some_variable = 0;" > conftest.$ac_ext
-  (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)
-  (eval "$ac_compile" 2>conftest.err)
-  cat conftest.err >&AS_MESSAGE_LOG_FD
-  (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)
-  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)
-  cat conftest.err >&AS_MESSAGE_LOG_FD
-  (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)
-  cat conftest.out >&AS_MESSAGE_LOG_FD
-  if $GREP 'External.*some_variable' conftest.out > /dev/null; then
-    lt_cv_nm_interface="MS dumpbin"
-  fi
-  rm -f conftest*])
-])# LT_PATH_NM
-
-# Old names:
-AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])
-AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AM_PROG_NM], [])
-dnl AC_DEFUN([AC_PROG_NM], [])
-
-
-# LT_LIB_M
-# --------
-# check for math library
-AC_DEFUN([LT_LIB_M],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case $host in
-*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)
-  # These system don't have libm, or don't need it
-  ;;
-*-ncr-sysv4.3*)
-  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
-  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
-  ;;
-*)
-  AC_CHECK_LIB(m, cos, LIBM="-lm")
-  ;;
-esac
-AC_SUBST([LIBM])
-])# LT_LIB_M
-
-# Old name:
-AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([AC_CHECK_LIBM], [])
-
-
-# _LT_COMPILER_NO_RTTI([TAGNAME])
-# -------------------------------
-m4_defun([_LT_COMPILER_NO_RTTI],
-[m4_require([_LT_TAG_COMPILER])dnl
-
-_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-
-if test "$GCC" = yes; then
-  _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-
-  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],
-    lt_cv_prog_compiler_rtti_exceptions,
-    [-fno-rtti -fno-exceptions], [],
-    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])
-fi
-_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],
-	[Compiler flag to turn off builtin functions])
-])# _LT_COMPILER_NO_RTTI
-
-
-# _LT_CMD_GLOBAL_SYMBOLS
-# ----------------------
-m4_defun([_LT_CMD_GLOBAL_SYMBOLS],
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-AC_REQUIRE([LT_PATH_LD])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output from $compiler object])
-AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],
-[
-# These are sane defaults that work on at least a few old systems.
-# [They come from Ultrix.  What could be older than Ultrix?!! ;)]
-
-# Character class describing NM global symbol codes.
-symcode='[[BCDEGRST]]'
-
-# Regexp to match symbols that can be accessed directly from C.
-sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'
-
-# Define system-specific variables.
-case $host_os in
-aix*)
-  symcode='[[BCDT]]'
-  ;;
-cygwin* | mingw* | pw32* | cegcc*)
-  symcode='[[ABCDGISTW]]'
-  ;;
-hpux*)
-  if test "$host_cpu" = ia64; then
-    symcode='[[ABCDEGRST]]'
-  fi
-  ;;
-irix* | nonstopux*)
-  symcode='[[BCDEGRST]]'
-  ;;
-osf*)
-  symcode='[[BCDEGQRST]]'
-  ;;
-solaris*)
-  symcode='[[BDRT]]'
-  ;;
-sco3.2v5*)
-  symcode='[[DT]]'
-  ;;
-sysv4.2uw2*)
-  symcode='[[DT]]'
-  ;;
-sysv5* | sco5v6* | unixware* | OpenUNIX*)
-  symcode='[[ABDT]]'
-  ;;
-sysv4)
-  symcode='[[DFNSTU]]'
-  ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-case `$NM -V 2>&1` in
-*GNU* | *'with BFD'*)
-  symcode='[[ABCDGIRSTW]]' ;;
-esac
-
-# Transform an extracted symbol line into a proper C declaration.
-# Some systems (esp. on ia64) link data and code symbols differently,
-# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
-
-# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"
-
-# Handle CRLF in mingw tool chain
-opt_cr=
-case $build_os in
-mingw*)
-  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp
-  ;;
-esac
-
-# Try without a prefix underscore, then with it.
-for ac_symprfx in "" "_"; do
-
-  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.
-  symxfrm="\\1 $ac_symprfx\\2 \\2"
-
-  # Write the raw and C identifiers.
-  if test "$lt_cv_nm_interface" = "MS dumpbin"; then
-    # Fake it for dumpbin and say T for any non-static function
-    # and D for any global variable.
-    # Also find C++ and __fastcall symbols from MSVC++,
-    # which start with @ or ?.
-    lt_cv_sys_global_symbol_pipe="$AWK ['"\
-"     {last_section=section; section=\$ 3};"\
-"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
-"     \$ 0!~/External *\|/{next};"\
-"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
-"     {if(hide[section]) next};"\
-"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-"     s[1]~/^[@?]/{print s[1], s[1]; next};"\
-"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
-"     ' prfx=^$ac_symprfx]"
-  else
-    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
-  fi
-
-  # Check to see that the pipe works correctly.
-  pipe_works=no
-
-  rm -f conftest*
-  cat > conftest.$ac_ext <<_LT_EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(void);
-void nm_test_func(void){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func();return(0);}
-_LT_EOF
-
-  if AC_TRY_EVAL(ac_compile); then
-    # Now try to grab the symbols.
-    nlist=conftest.nm
-    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then
-      # Try sorting and uniquifying the output.
-      if sort "$nlist" | uniq > "$nlist"T; then
-	mv -f "$nlist"T "$nlist"
-      else
-	rm -f "$nlist"T
-      fi
-
-      # Make sure that we snagged all the symbols we need.
-      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then
-	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
-	  cat <<_LT_EOF > conftest.$ac_ext
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-_LT_EOF
-	  # Now generate the symbol file.
-	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'
-
-	  cat <<_LT_EOF >> conftest.$ac_ext
-
-/* The mapping between symbol names and symbols.  */
-const struct {
-  const char *name;
-  void       *address;
-}
-lt__PROGRAM__LTX_preloaded_symbols[[]] =
-{
-  { "@PROGRAM@", (void *) 0 },
-_LT_EOF
-	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
-	  cat <<\_LT_EOF >> conftest.$ac_ext
-  {0, (void *) 0}
-};
-
-/* This works around a problem in FreeBSD linker */
-#ifdef FREEBSD_WORKAROUND
-static const void *lt_preloaded_setup() {
-  return lt__PROGRAM__LTX_preloaded_symbols;
-}
-#endif
-
-#ifdef __cplusplus
-}
-#endif
-_LT_EOF
-	  # Now try linking the two files.
-	  mv conftest.$ac_objext conftstm.$ac_objext
-	  lt_save_LIBS="$LIBS"
-	  lt_save_CFLAGS="$CFLAGS"
-	  LIBS="conftstm.$ac_objext"
-	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
-	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
-	    pipe_works=yes
-	  fi
-	  LIBS="$lt_save_LIBS"
-	  CFLAGS="$lt_save_CFLAGS"
-	else
-	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD
-	fi
-      else
-	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD
-      fi
-    else
-      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD
-    fi
-  else
-    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD
-    cat conftest.$ac_ext >&5
-  fi
-  rm -rf conftest* conftst*
-
-  # Do not use the global_symbol_pipe unless it works.
-  if test "$pipe_works" = yes; then
-    break
-  else
-    lt_cv_sys_global_symbol_pipe=
-  fi
-done
-])
-if test -z "$lt_cv_sys_global_symbol_pipe"; then
-  lt_cv_sys_global_symbol_to_cdecl=
-fi
-if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  AC_MSG_RESULT(failed)
-else
-  AC_MSG_RESULT(ok)
-fi
-
-_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],
-    [Take the output of nm and produce a listing of raw symbols and C names])
-_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
-    [Transform the output of nm in a proper C declaration])
-_LT_DECL([global_symbol_to_c_name_address],
-    [lt_cv_sys_global_symbol_to_c_name_address], [1],
-    [Transform the output of nm in a C name address pair])
-_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
-    [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
-    [Transform the output of nm in a C name address pair when lib prefix is needed])
-]) # _LT_CMD_GLOBAL_SYMBOLS
-
-
-# _LT_COMPILER_PIC([TAGNAME])
-# ---------------------------
-m4_defun([_LT_COMPILER_PIC],
-[m4_require([_LT_TAG_COMPILER])dnl
-_LT_TAGVAR(lt_prog_compiler_wl, $1)=
-_LT_TAGVAR(lt_prog_compiler_pic, $1)=
-_LT_TAGVAR(lt_prog_compiler_static, $1)=
-
-AC_MSG_CHECKING([for $compiler option to produce PIC])
-m4_if([$1], [CXX], [
-  # C++ specific cases for pic, static, wl, etc.
-  if test "$GXX" = yes; then
-    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
-    case $host_os in
-    aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-        ;;
-      m68k)
-            # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-        ;;
-      esac
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-    mingw* | cygwin* | os2* | pw32* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      m4_if([$1], [GCJ], [],
-	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-    *djgpp*)
-      # DJGPP does not support shared libraries at all
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-      ;;
-    interix[[3-9]]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-    hpux*)
-      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
-      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
-      # sets the default TLS model and affects inlining.
-      case $host_cpu in
-      hppa*64*)
-	;;
-      *)
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	;;
-      esac
-      ;;
-    *qnx* | *nto*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-      ;;
-    *)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-  else
-    case $host_os in
-      aix[[4-9]]*)
-	# All AIX code is PIC.
-	if test "$host_cpu" = ia64; then
-	  # AIX 5 now supports IA64 processor
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	else
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-	fi
-	;;
-      chorus*)
-	case $cc_basename in
-	cxch68*)
-	  # Green Hills C++ Compiler
-	  # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
-	  ;;
-	esac
-	;;
-      dgux*)
-	case $cc_basename in
-	  ec++*)
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    ;;
-	  ghcx*)
-	    # Green Hills C++ Compiler
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      freebsd* | dragonfly*)
-	# FreeBSD uses GNU C++
-	;;
-      hpux9* | hpux10* | hpux11*)
-	case $cc_basename in
-	  CC*)
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-	    if test "$host_cpu" != ia64; then
-	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	    fi
-	    ;;
-	  aCC*)
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-	    case $host_cpu in
-	    hppa*64*|ia64*)
-	      # +Z the default
-	      ;;
-	    *)
-	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	      ;;
-	    esac
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      interix*)
-	# This is c89, which is MS Visual C++ (no shared libs)
-	# Anyone wants to do a port?
-	;;
-      irix5* | irix6* | nonstopux*)
-	case $cc_basename in
-	  CC*)
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    # CC pic flag -KPIC is the default.
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      linux* | k*bsd*-gnu | kopensolaris*-gnu)
-	case $cc_basename in
-	  KCC*)
-	    # KAI C++ Compiler
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	    ;;
-	  ecpc* )
-	    # old Intel C++ for x86_64 which still supported -KPIC.
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-	    ;;
-	  icpc* )
-	    # Intel C++, used to be incompatible with GCC.
-	    # ICC 10 doesn't accept -KPIC any more.
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-	    ;;
-	  pgCC* | pgcpp*)
-	    # Portland Group C++ compiler
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	  cxx*)
-	    # Compaq C++
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    ;;
-	  xlc* | xlC*)
-	    # IBM XL 8.0 on PPC
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
-	    ;;
-	  *)
-	    case `$CC -V 2>&1 | sed 5q` in
-	    *Sun\ C*)
-	      # Sun C++ 5.9
-	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-	      ;;
-	    esac
-	    ;;
-	esac
-	;;
-      lynxos*)
-	;;
-      m88k*)
-	;;
-      mvs*)
-	case $cc_basename in
-	  cxx*)
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      netbsd* | netbsdelf*-gnu)
-	;;
-      *qnx* | *nto*)
-        # QNX uses GNU C++, but need to define -shared option too, otherwise
-        # it will coredump.
-        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-        ;;
-      osf3* | osf4* | osf5*)
-	case $cc_basename in
-	  KCC*)
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'
-	    ;;
-	  RCC*)
-	    # Rational C++ 2.4.1
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  cxx*)
-	    # Digital/Compaq C++
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    # Make sure the PIC flag is empty.  It appears that all Alpha
-	    # Linux and Compaq Tru64 Unix objects are PIC.
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      psos*)
-	;;
-      solaris*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.2, 5.x and Centerline C++
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-	    ;;
-	  gcx*)
-	    # Green Hills C++ Compiler
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sunos4*)
-	case $cc_basename in
-	  CC*)
-	    # Sun C++ 4.x
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	  lcc*)
-	    # Lucid
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-	case $cc_basename in
-	  CC*)
-	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	    ;;
-	esac
-	;;
-      tandem*)
-	case $cc_basename in
-	  NCC*)
-	    # NonStop-UX NCC 3.20
-	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	    ;;
-	  *)
-	    ;;
-	esac
-	;;
-      vxworks*)
-	;;
-      *)
-	_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-	;;
-    esac
-  fi
-],
-[
-  if test "$GCC" = yes; then
-    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-
-    case $host_os in
-      aix*)
-      # All AIX code is PIC.
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-        ;;
-      m68k)
-            # FIXME: we need at least 68020 code to build shared libraries, but
-            # adding the `-m68020' flag to GCC prevents building anything better,
-            # like `-m68040'.
-            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
-        ;;
-      esac
-      ;;
-
-    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
-      # PIC is the default for these OSes.
-      ;;
-
-    mingw* | cygwin* | pw32* | os2* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      # Although the cygwin gcc ignores -fPIC, still need this for old-style
-      # (--disable-auto-import) libraries
-      m4_if([$1], [GCJ], [],
-	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
-
-    darwin* | rhapsody*)
-      # PIC is the default on this platform
-      # Common symbols not allowed in MH_DYLIB files
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
-      ;;
-
-    hpux*)
-      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit
-      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag
-      # sets the default TLS model and affects inlining.
-      case $host_cpu in
-      hppa*64*)
-	# +Z the default
-	;;
-      *)
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	;;
-      esac
-      ;;
-
-    interix[[3-9]]*)
-      # Interix 3.x gcc -fpic/-fPIC options generate broken code.
-      # Instead, we relocate shared libraries at runtime.
-      ;;
-
-    msdosdjgpp*)
-      # Just because we use GCC doesn't mean we suddenly get shared libraries
-      # on systems that don't support them.
-      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      enable_shared=no
-      ;;
-
-    *nto* | *qnx*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic
-      fi
-      ;;
-
-    *)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-      ;;
-    esac
-  else
-    # PORTME Check for flag to pass linker flags through the system compiler.
-    case $host_os in
-    aix*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      if test "$host_cpu" = ia64; then
-	# AIX 5 now supports IA64 processor
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      else
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'
-      fi
-      ;;
-
-    mingw* | cygwin* | pw32* | os2* | cegcc*)
-      # This hack is so that the source file can tell whether it is being
-      # built for inclusion in a dll (and should export symbols for example).
-      m4_if([$1], [GCJ], [],
-	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
-      ;;
-
-    hpux9* | hpux10* | hpux11*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
-      # not for PA HP-UX.
-      case $host_cpu in
-      hppa*64*|ia64*)
-	# +Z the default
-	;;
-      *)
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
-	;;
-      esac
-      # Is there a better lt_prog_compiler_static that works with the bundled CC?
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # PIC (with -KPIC) is the default.
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    linux* | k*bsd*-gnu | kopensolaris*-gnu)
-      case $cc_basename in
-      # old Intel for x86_64 which still supported -KPIC.
-      ecc*)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-        ;;
-      # icc used to be incompatible with GCC.
-      # ICC 10 doesn't accept -KPIC any more.
-      icc* | ifort*)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
-        ;;
-      # Lahey Fortran 8.1.
-      lf95*)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'
-	;;
-      pgcc* | pgf77* | pgf90* | pgf95*)
-        # Portland Group compilers (*not* the Pentium gcc compiler,
-	# which looks to be a dead project)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-        ;;
-      ccc*)
-        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-        # All Alpha code is PIC.
-        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-        ;;
-      xl*)
-	# IBM XL C 8.0/Fortran 10.1 on PPC
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'
-	;;
-      *)
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)
-	  # Sun C 5.9
-	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-	  ;;
-	*Sun\ F*)
-	  # Sun Fortran 8.3 passes all unrecognized flags to the linker
-	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''
-	  ;;
-	esac
-	;;
-      esac
-      ;;
-
-    newsos6)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    *nto* | *qnx*)
-      # QNX uses GNU C++, but need to define -shared option too, otherwise
-      # it will coredump.
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'
-      ;;
-
-    osf3* | osf4* | osf5*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      # All OSF/1 code is PIC.
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    rdos*)
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
-      ;;
-
-    solaris*)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      case $cc_basename in
-      f77* | f90* | f95*)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;
-      *)
-	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;
-      esac
-      ;;
-
-    sunos4*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sysv4 | sysv4.2uw2* | sysv4.3*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec ;then
-	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
-	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      fi
-      ;;
-
-    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    unicos*)
-      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
-      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
-
-    uts4*)
-      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'
-      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
-      ;;
-
-    *)
-      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no
-      ;;
-    esac
-  fi
-])
-case $host_os in
-  # For platforms which do not support PIC, -DPIC is meaningless:
-  *djgpp*)
-    _LT_TAGVAR(lt_prog_compiler_pic, $1)=
-    ;;
-  *)
-    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"
-    ;;
-esac
-AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])
-_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],
-	[How to pass a linker flag through the compiler])
-
-#
-# Check to make sure the PIC flag actually works.
-#
-if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then
-  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],
-    [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],
-    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],
-    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in
-     "" | " "*) ;;
-     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;
-     esac],
-    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=
-     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])
-fi
-_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],
-	[Additional compiler flags for building library objects])
-
-#
-# Check to make sure the static flag actually works.
-#
-wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"
-_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],
-  _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),
-  $lt_tmp_static_flag,
-  [],
-  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])
-_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],
-	[Compiler flag to prevent dynamic linking])
-])# _LT_COMPILER_PIC
-
-
-# _LT_LINKER_SHLIBS([TAGNAME])
-# ----------------------------
-# See if the linker supports building shared libraries.
-m4_defun([_LT_LINKER_SHLIBS],
-[AC_REQUIRE([LT_PATH_LD])dnl
-AC_REQUIRE([LT_PATH_NM])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
-m4_require([_LT_DECL_SED])dnl
-m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
-m4_require([_LT_TAG_COMPILER])dnl
-AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-m4_if([$1], [CXX], [
-  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  case $host_os in
-  aix[[4-9]]*)
-    # If we're using GNU nm, then we don't want the "-C" option.
-    # -C means demangle to AIX nm, but means don't demangle with GNU nm
-    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-    else
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-    fi
-    ;;
-  pw32*)
-    _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
-  ;;
-  cygwin* | mingw* | cegcc*)
-    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  linux* | k*bsd*-gnu)
-    _LT_TAGVAR(link_all_deplibs, $1)=no
-  ;;
-  *)
-    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  ;;
-  esac
-  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-], [
-  runpath_var=
-  _LT_TAGVAR(allow_undefined_flag, $1)=
-  _LT_TAGVAR(always_export_symbols, $1)=no
-  _LT_TAGVAR(archive_cmds, $1)=
-  _LT_TAGVAR(archive_expsym_cmds, $1)=
-  _LT_TAGVAR(compiler_needs_object, $1)=no
-  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-  _LT_TAGVAR(export_dynamic_flag_spec, $1)=
-  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
-  _LT_TAGVAR(hardcode_automatic, $1)=no
-  _LT_TAGVAR(hardcode_direct, $1)=no
-  _LT_TAGVAR(hardcode_direct_absolute, $1)=no
-  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-  _LT_TAGVAR(hardcode_libdir_separator, $1)=
-  _LT_TAGVAR(hardcode_minus_L, $1)=no
-  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-  _LT_TAGVAR(inherit_rpath, $1)=no
-  _LT_TAGVAR(link_all_deplibs, $1)=unknown
-  _LT_TAGVAR(module_cmds, $1)=
-  _LT_TAGVAR(module_expsym_cmds, $1)=
-  _LT_TAGVAR(old_archive_from_new_cmds, $1)=
-  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=
-  _LT_TAGVAR(thread_safe_flag_spec, $1)=
-  _LT_TAGVAR(whole_archive_flag_spec, $1)=
-  # include_expsyms should be a list of space-separated symbols to be *always*
-  # included in the symbol list
-  _LT_TAGVAR(include_expsyms, $1)=
-  # exclude_expsyms can be an extended regexp of symbols to exclude
-  # it will be wrapped by ` (' and `)$', so one must not match beginning or
-  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
-  # as well as any symbol that contains `d'.
-  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
-  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
-  # platforms (ab)use it in PIC code, but their linkers get confused if
-  # the symbol is explicitly referenced.  Since portable code cannot
-  # rely on this symbol name, it's probably fine to never include it in
-  # preloaded symbol tables.
-  # Exclude shared library initialization/finalization symbols.
-dnl Note also adjust exclude_expsyms for C++ above.
-  extract_expsyms_cmds=
-
-  case $host_os in
-  cygwin* | mingw* | pw32* | cegcc*)
-    # FIXME: the MSVC++ port hasn't been tested in a loooong time
-    # When not using gcc, we currently assume that we are using
-    # Microsoft Visual C++.
-    if test "$GCC" != yes; then
-      with_gnu_ld=no
-    fi
-    ;;
-  interix*)
-    # we just hope/assume this is gcc and not c89 (= MSVC++)
-    with_gnu_ld=yes
-    ;;
-  openbsd*)
-    with_gnu_ld=no
-    ;;
-  linux* | k*bsd*-gnu)
-    _LT_TAGVAR(link_all_deplibs, $1)=no
-    ;;
-  esac
-
-  _LT_TAGVAR(ld_shlibs, $1)=yes
-  if test "$with_gnu_ld" = yes; then
-    # If archive_cmds runs LD, not CC, wlarc should be empty
-    wlarc='${wl}'
-
-    # Set some defaults for GNU ld with shared library support. These
-    # are reset later if shared libraries are not supported. Putting them
-    # here allows them to be overridden if necessary.
-    runpath_var=LD_RUN_PATH
-    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-    # ancient GNU ld didn't support --whole-archive et. al.
-    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
-      _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-    else
-      _LT_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-    supports_anon_versioning=no
-    case `$LD -v 2>&1` in
-      *GNU\ gold*) supports_anon_versioning=yes ;;
-      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
-      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-      *\ 2.11.*) ;; # other 2.11 versions
-      *) supports_anon_versioning=yes ;;
-    esac
-
-    # See if GNU ld supports shared libraries.
-    case $host_os in
-    aix[[3-9]]*)
-      # On AIX/PPC, the GNU linker is very broken
-      if test "$host_cpu" != ia64; then
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: the GNU linker, at least up to release 2.9.1, is reported
-*** to be unable to reliably create shared libraries on AIX.
-*** Therefore, libtool is disabling shared libraries support.  If you
-*** really care for shared libraries, you may want to modify your PATH
-*** so that a non-GNU linker is found, and then restart.
-
-_LT_EOF
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-            _LT_TAGVAR(archive_expsym_cmds, $1)=''
-        ;;
-      m68k)
-            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-            _LT_TAGVAR(hardcode_minus_L, $1)=yes
-        ;;
-      esac
-      ;;
-
-    beos*)
-      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	# support --undefined.  This deserves some investigation.  FIXME
-	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      else
-	_LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    cygwin* | mingw* | pw32* | cegcc*)
-      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-      # as there is no search path for DLLs.
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(always_export_symbols, $1)=no
-      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'
-
-      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-	# If the export-symbols file already is a .def file (1st line
-	# is EXPORTS), use it as is; otherwise, prepend...
-	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	  cp $export_symbols $output_objdir/$soname.def;
-	else
-	  echo EXPORTS > $output_objdir/$soname.def;
-	  cat $export_symbols >> $output_objdir/$soname.def;
-	fi~
-	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-      else
-	_LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    interix[[3-9]]*)
-      _LT_TAGVAR(hardcode_direct, $1)=no
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-      # Instead, shared libraries are loaded at an image base (0x10000000 by
-      # default) and relocated if they conflict, which is a slow very memory
-      # consuming and fragmenting process.  To avoid this, we pick a random,
-      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-      ;;
-
-    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
-      tmp_diet=no
-      if test "$host_os" = linux-dietlibc; then
-	case $cc_basename in
-	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)
-	esac
-      fi
-      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
-	 && test "$tmp_diet" = no
-      then
-	tmp_addflag=
-	tmp_sharedflag='-shared'
-	case $cc_basename,$host_cpu in
-        pgcc*)				# Portland Group C compiler
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag'
-	  ;;
-	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-	  tmp_addflag=' $pic_flag -Mnomain' ;;
-	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64
-	  tmp_addflag=' -i_dynamic' ;;
-	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64
-	  tmp_addflag=' -i_dynamic -nofor_main' ;;
-	ifc* | ifort*)			# Intel Fortran compiler
-	  tmp_addflag=' -nofor_main' ;;
-	lf95*)				# Lahey Fortran 8.1
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)=
-	  tmp_sharedflag='--shared' ;;
-	xl[[cC]]*)			# IBM XL C 8.0 on PPC (deal with xlf below)
-	  tmp_sharedflag='-qmkshrobj'
-	  tmp_addflag= ;;
-	esac
-	case `$CC -V 2>&1 | sed 5q` in
-	*Sun\ C*)			# Sun C 5.9
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-	  _LT_TAGVAR(compiler_needs_object, $1)=yes
-	  tmp_sharedflag='-G' ;;
-	*Sun\ F*)			# Sun Fortran 8.3
-	  tmp_sharedflag='-G' ;;
-	esac
-	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-
-        if test "x$supports_anon_versioning" = xyes; then
-          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	    echo "local: *; };" >> $output_objdir/$libname.ver~
-	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-        fi
-
-	case $cc_basename in
-	xlf*)
-	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-	  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'
-	  if test "x$supports_anon_versioning" = xyes; then
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-	      echo "local: *; };" >> $output_objdir/$libname.ver~
-	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
-	  fi
-	  ;;
-	esac
-      else
-        _LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    netbsd* | netbsdelf*-gnu)
-      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
-	wlarc=
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      fi
-      ;;
-
-    solaris*)
-      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: The releases 2.8.* of the GNU linker cannot reliably
-*** create shared libraries on Solaris systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.9.1 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	_LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)
-      case `$LD -v 2>&1` in
-        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	cat <<_LT_EOF 1>&2
-
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
-*** reliably create shared libraries on SCO systems.  Therefore, libtool
-*** is disabling shared libraries support.  We urge you to upgrade GNU
-*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify
-*** your PATH or compiler configuration so that the native linker is
-*** used, and then restart.
-
-_LT_EOF
-	;;
-	*)
-	  # For security reasons, it is highly recommended that you always
-	  # use absolute paths for naming shared libraries, and exclude the
-	  # DT_RUNPATH tag from executables and libraries.  But doing so
-	  # requires that you compile everything twice, which is a pain.
-	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-	  else
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	  fi
-	;;
-      esac
-      ;;
-
-    sunos4*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      wlarc=
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *)
-      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-      else
-	_LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-    esac
-
-    if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
-      runpath_var=
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)=
-      _LT_TAGVAR(whole_archive_flag_spec, $1)=
-    fi
-  else
-    # PORTME fill in a description of your system's linker (not GNU ld)
-    case $host_os in
-    aix3*)
-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(always_export_symbols, $1)=yes
-      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
-      # Note: this linker hardcodes the directories in LIBPATH if there
-      # are no directories specified by -L.
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
-	# Neither direct hardcoding nor static linking is supported with a
-	# broken collect2.
-	_LT_TAGVAR(hardcode_direct, $1)=unsupported
-      fi
-      ;;
-
-    aix[[4-9]]*)
-      if test "$host_cpu" = ia64; then
-	# On IA64, the linker does run time linking by default, so we don't
-	# have to do anything special.
-	aix_use_runtimelinking=no
-	exp_sym_flag='-Bexport'
-	no_entry_flag=""
-      else
-	# If we're using GNU nm, then we don't want the "-C" option.
-	# -C means demangle to AIX nm, but means don't demangle with GNU nm
-	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
-	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-	else
-	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
-	fi
-	aix_use_runtimelinking=no
-
-	# Test if we are trying to use run time linking or normal
-	# AIX style linking. If -brtl is somewhere in LDFLAGS, we
-	# need to do runtime linking.
-	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
-	  for ld_flag in $LDFLAGS; do
-	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
-	    aix_use_runtimelinking=yes
-	    break
-	  fi
-	  done
-	  ;;
-	esac
-
-	exp_sym_flag='-bexport'
-	no_entry_flag='-bnoentry'
-      fi
-
-      # When large executables or shared objects are built, AIX ld can
-      # have problems creating the table of contents.  If linking a library
-      # or program results in "error TOC overflow" add -mminimal-toc to
-      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-      _LT_TAGVAR(archive_cmds, $1)=''
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
-
-      if test "$GCC" = yes; then
-	case $host_os in aix4.[[012]]|aix4.[[012]].*)
-	# We only want to do this on AIX 4.2 and lower, the check
-	# below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" &&
-	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null
-	  then
-	  # We have reworked collect2
-	  :
-	  else
-	  # We have old collect2
-	  _LT_TAGVAR(hardcode_direct, $1)=unsupported
-	  # It fails to find uninstalled libraries when the uninstalled
-	  # path is not listed in the libpath.  Setting hardcode_minus_L
-	  # to unsupported forces relinking
-	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	  _LT_TAGVAR(hardcode_libdir_separator, $1)=
-	  fi
-	  ;;
-	esac
-	shared_flag='-shared'
-	if test "$aix_use_runtimelinking" = yes; then
-	  shared_flag="$shared_flag "'${wl}-G'
-	fi
-	_LT_TAGVAR(link_all_deplibs, $1)=no
-      else
-	# not using gcc
-	if test "$host_cpu" = ia64; then
-	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	# chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-	else
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag='${wl}-G'
-	  else
-	    shared_flag='${wl}-bM:SRE'
-	  fi
-	fi
-      fi
-
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
-      # It seems that -bexpall does not export symbols beginning with
-      # underscore (_), so it is better to generate a list of symbols to export.
-      _LT_TAGVAR(always_export_symbols, $1)=yes
-      if test "$aix_use_runtimelinking" = yes; then
-	# Warning - without using the other runtime loading flags (-brtl),
-	# -berok will link without error, but may produce a broken library.
-	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
-        # Determine the default libpath from the value encoded in an
-        # empty executable.
-        _LT_SYS_MODULE_PATH_AIX
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-      else
-	if test "$host_cpu" = ia64; then
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-	else
-	 # Determine the default libpath from the value encoded in an
-	 # empty executable.
-	 _LT_SYS_MODULE_PATH_AIX
-	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	  # Warning - without using the other run time loading flags,
-	  # -berok will link without error, but may produce a broken library.
-	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	  # Exported symbols can be pulled into shared objects from archives
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-	  # This is similar to how AIX traditionally builds its shared libraries.
-	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-	fi
-      fi
-      ;;
-
-    amigaos*)
-      case $host_cpu in
-      powerpc)
-            # see comment about AmigaOS4 .so support
-            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-            _LT_TAGVAR(archive_expsym_cmds, $1)=''
-        ;;
-      m68k)
-            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
-            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-            _LT_TAGVAR(hardcode_minus_L, $1)=yes
-        ;;
-      esac
-      ;;
-
-    bsdi[[45]]*)
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic
-      ;;
-
-    cygwin* | mingw* | pw32* | cegcc*)
-      # When not using gcc, we currently assume that we are using
-      # Microsoft Visual C++.
-      # hardcode_libdir_flag_spec is actually meaningless, as there is
-      # no search path for DLLs.
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '
-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      # Tell ltmain to make .lib files, not .a files.
-      libext=lib
-      # Tell ltmain to make .dll files, not .so files.
-      shrext_cmds=".dll"
-      # FIXME: Setting linknames here is a bad hack.
-      _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='
-      # The linker will automatically build a .lib file if we build a DLL.
-      _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
-      # FIXME: Should let the user specify the lib program.
-      _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'
-      _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'
-      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-      ;;
-
-    darwin* | rhapsody*)
-      _LT_DARWIN_LINKER_FEATURES($1)
-      ;;
-
-    dgux*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    freebsd1*)
-      _LT_TAGVAR(ld_shlibs, $1)=no
-      ;;
-
-    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
-    # support.  Future versions do this automatically, but an explicit c++rt0.o
-    # does not break anything, and helps significantly (at the cost of a little
-    # extra space).
-    freebsd2.2*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    # Unfortunately, older versions of FreeBSD 2 do not have this feature.
-    freebsd2*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | dragonfly*)
-      _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    hpux9*)
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-      fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-
-      # hardcode_minus_L: Not really in the search PATH,
-      # but as the default location of the library.
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-      ;;
-
-    hpux10*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      if test "$with_gnu_ld" = no; then
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'
-	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
-	_LT_TAGVAR(hardcode_direct, $1)=yes
-	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	# hardcode_minus_L: Not really in the search PATH,
-	# but as the default location of the library.
-	_LT_TAGVAR(hardcode_minus_L, $1)=yes
-      fi
-      ;;
-
-    hpux11*)
-      if test "$GCC" = yes -a "$with_gnu_ld" = no; then
-	case $host_cpu in
-	hppa*64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      else
-	case $host_cpu in
-	hppa*64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	ia64*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	esac
-      fi
-      if test "$with_gnu_ld" = no; then
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	_LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	case $host_cpu in
-	hppa*64*|ia64*)
-	  _LT_TAGVAR(hardcode_direct, $1)=no
-	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	  ;;
-	*)
-	  _LT_TAGVAR(hardcode_direct, $1)=yes
-	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-
-	  # hardcode_minus_L: Not really in the search PATH,
-	  # but as the default location of the library.
-	  _LT_TAGVAR(hardcode_minus_L, $1)=yes
-	  ;;
-	esac
-      fi
-      ;;
-
-    irix5* | irix6* | nonstopux*)
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	# Try to use the -exported_symbol ld option, if it does not
-	# work, assume that -exports_file does not work either and
-	# implicitly export all symbols.
-        save_LDFLAGS="$LDFLAGS"
-        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
-        AC_LINK_IFELSE(int foo(void) {},
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
-        )
-        LDFLAGS="$save_LDFLAGS"
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
-      fi
-      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_TAGVAR(inherit_rpath, $1)=yes
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    netbsd* | netbsdelf*-gnu)
-      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF
-      fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    newsos6)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *nto* | *qnx*)
-      ;;
-
-    openbsd*)
-      if test -f /usr/libexec/ld.so; then
-	_LT_TAGVAR(hardcode_direct, $1)=yes
-	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	else
-	  case $host_os in
-	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
-	     _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
-	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	     ;;
-	   *)
-	     _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
-	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	     ;;
-	  esac
-	fi
-      else
-	_LT_TAGVAR(ld_shlibs, $1)=no
-      fi
-      ;;
-
-    os2*)
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
-      _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
-      ;;
-
-    osf3*)
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-      else
-	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-      fi
-      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
-
-    osf4* | osf5*)	# as osf3* with the addition of -msym flag
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-      else
-	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
-	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
-
-	# Both c and cxx compiler support -rpath directly
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-      fi
-      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-      ;;
-
-    solaris*)
-      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
-      if test "$GCC" = yes; then
-	wlarc='${wl}'
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-      else
-	case `$CC -V 2>&1` in
-	*"Compilers 5.0"*)
-	  wlarc=''
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
-	  ;;
-	*)
-	  wlarc='${wl}'
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
-	  ;;
-	esac
-      fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      case $host_os in
-      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-      *)
-	# The compiler driver will combine and reorder linker options,
-	# but understands `-z linker_flag'.  GCC discards it without `$wl',
-	# but is careful enough not to reorder.
-	# Supported since Solaris 2.6 (maybe 2.5.1?)
-	if test "$GCC" = yes; then
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-	else
-	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
-	fi
-	;;
-      esac
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      ;;
-
-    sunos4*)
-      if test "x$host_vendor" = xsequent; then
-	# Use $CC to link under sequent, because it throws in some extra .o
-	# files that make .init and .fini sections work.
-	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
-      fi
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(hardcode_direct, $1)=yes
-      _LT_TAGVAR(hardcode_minus_L, $1)=yes
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv4)
-      case $host_vendor in
-	sni)
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???
-	;;
-	siemens)
-	  ## LD is ld it makes a PLAMLIB
-	  ## CC just makes a GrossModule.
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'
-	  _LT_TAGVAR(hardcode_direct, $1)=no
-        ;;
-	motorola)
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	  _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie
-	;;
-      esac
-      runpath_var='LD_RUN_PATH'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    sysv4.3*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'
-      ;;
-
-    sysv4*MP*)
-      if test -d /usr/nec; then
-	_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	runpath_var=LD_RUN_PATH
-	hardcode_runpath_var=yes
-	_LT_TAGVAR(ld_shlibs, $1)=yes
-      fi
-      ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    sysv5* | sco3.2v5* | sco5v6*)
-      # Note: We can NOT use -z defs as we might desire, because we do not
-      # link with -lc, and that would cause any symbols used from libc to
-      # always be unresolved, which means just about no library would
-      # ever link correctly.  If we're not using GNU ld we use -z text
-      # though, which does catch some bad symbols but isn't as heavy-handed
-      # as -z defs.
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
-      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-      _LT_TAGVAR(link_all_deplibs, $1)=yes
-      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-      runpath_var='LD_RUN_PATH'
-
-      if test "$GCC" = yes; then
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      else
-	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-      fi
-      ;;
-
-    uts4*)
-      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
-      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      ;;
-
-    *)
-      _LT_TAGVAR(ld_shlibs, $1)=no
-      ;;
-    esac
-
-    if test x$host_vendor = xsni; then
-      case $host in
-      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
-	;;
-      esac
-    fi
-  fi
-])
-AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
-
-_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl
-_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl
-_LT_DECL([], [extract_expsyms_cmds], [2],
-    [The commands to extract the exported symbol list from a shared archive])
-
-#
-# Do we need to explicitly link libc?
-#
-case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in
-x|xyes)
-  # Assume -lc should be added
-  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-
-  if test "$enable_shared" = yes && test "$GCC" = yes; then
-    case $_LT_TAGVAR(archive_cmds, $1) in
-    *'~'*)
-      # FIXME: we may have to deal with multi-command sequences.
-      ;;
-    '$CC '*)
-      # Test whether the compiler implicitly links with -lc since on some
-      # systems, -lgcc has to come before -lc. If gcc already passes -lc
-      # to ld, don't add -lc before -lgcc.
-      AC_MSG_CHECKING([whether -lc should be explicitly linked in])
-      $RM conftest*
-      echo "$lt_simple_compile_test_code" > conftest.$ac_ext
-
-      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then
-        soname=conftest
-        lib=conftest
-        libobjs=conftest.$ac_objext
-        deplibs=
-        wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)
-	pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)
-        compiler_flags=-v
-        linker_flags=-v
-        verstring=
-        output_objdir=.
-        libname=conftest
-        lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)
-        _LT_TAGVAR(allow_undefined_flag, $1)=
-        if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)
-        then
-	  _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-        else
-	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-        fi
-        _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag
-      else
-        cat conftest.err 1>&5
-      fi
-      $RM conftest*
-      AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])
-      ;;
-    esac
-  fi
-  ;;
-esac
-
-_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],
-    [Whether or not to add -lc for building shared libraries])
-_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],
-    [enable_shared_with_static_runtimes], [0],
-    [Whether or not to disallow shared libs when runtime libs are static])
-_LT_TAGDECL([], [export_dynamic_flag_spec], [1],
-    [Compiler flag to allow reflexive dlopens])
-_LT_TAGDECL([], [whole_archive_flag_spec], [1],
-    [Compiler flag to generate shared objects directly from archives])
-_LT_TAGDECL([], [compiler_needs_object], [1],
-    [Whether the compiler copes with passing no objects directly])
-_LT_TAGDECL([], [old_archive_from_new_cmds], [2],
-    [Create an old-style archive from a shared archive])
-_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],
-    [Create a temporary old-style archive to link instead of a shared archive])
-_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])
-_LT_TAGDECL([], [archive_expsym_cmds], [2])
-_LT_TAGDECL([], [module_cmds], [2],
-    [Commands used to build a loadable module if different from building
-    a shared archive.])
-_LT_TAGDECL([], [module_expsym_cmds], [2])
-_LT_TAGDECL([], [with_gnu_ld], [1],
-    [Whether we are building with GNU ld or not])
-_LT_TAGDECL([], [allow_undefined_flag], [1],
-    [Flag that allows shared libraries with undefined symbols to be built])
-_LT_TAGDECL([], [no_undefined_flag], [1],
-    [Flag that enforces no undefined symbols])
-_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],
-    [Flag to hardcode $libdir into a binary during linking.
-    This must work even if $libdir does not exist])
-_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],
-    [[If ld is used when linking, flag to hardcode $libdir into a binary
-    during linking.  This must work even if $libdir does not exist]])
-_LT_TAGDECL([], [hardcode_libdir_separator], [1],
-    [Whether we need a single "-rpath" flag with a separated argument])
-_LT_TAGDECL([], [hardcode_direct], [0],
-    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
-    DIR into the resulting binary])
-_LT_TAGDECL([], [hardcode_direct_absolute], [0],
-    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
-    DIR into the resulting binary and the resulting library dependency is
-    "absolute", i.e impossible to change by setting ${shlibpath_var} if the
-    library is relocated])
-_LT_TAGDECL([], [hardcode_minus_L], [0],
-    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR
-    into the resulting binary])
-_LT_TAGDECL([], [hardcode_shlibpath_var], [0],
-    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
-    into the resulting binary])
-_LT_TAGDECL([], [hardcode_automatic], [0],
-    [Set to "yes" if building a shared library automatically hardcodes DIR
-    into the library and all subsequent libraries and executables linked
-    against it])
-_LT_TAGDECL([], [inherit_rpath], [0],
-    [Set to yes if linker adds runtime paths of dependent libraries
-    to runtime path list])
-_LT_TAGDECL([], [link_all_deplibs], [0],
-    [Whether libtool must link a program against all its dependency libraries])
-_LT_TAGDECL([], [fix_srcfile_path], [1],
-    [Fix the shell variable $srcfile for the compiler])
-_LT_TAGDECL([], [always_export_symbols], [0],
-    [Set to "yes" if exported symbols are required])
-_LT_TAGDECL([], [export_symbols_cmds], [2],
-    [The commands to list exported symbols])
-_LT_TAGDECL([], [exclude_expsyms], [1],
-    [Symbols that should not be listed in the preloaded symbols])
-_LT_TAGDECL([], [include_expsyms], [1],
-    [Symbols that must always be exported])
-_LT_TAGDECL([], [prelink_cmds], [2],
-    [Commands necessary for linking programs (against libraries) with templates])
-_LT_TAGDECL([], [file_list_spec], [1],
-    [Specify filename containing input files])
-dnl FIXME: Not yet implemented
-dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],
-dnl    [Compiler flag to generate thread safe objects])
-])# _LT_LINKER_SHLIBS
-
-
-# _LT_LANG_C_CONFIG([TAG])
-# ------------------------
-# Ensure that the configuration variables for a C compiler are suitably
-# defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_C_CONFIG],
-[m4_require([_LT_DECL_EGREP])dnl
-lt_save_CC="$CC"
-AC_LANG_PUSH(C)
-
-# Source file extension for C test sources.
-ac_ext=c
-
-# Object file extension for compiled C test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="int some_variable = 0;"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='int main(){return(0);}'
-
-_LT_TAG_COMPILER
-# Save the default compiler, since it gets overwritten when the other
-# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.
-compiler_DEFAULT=$CC
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-if test -n "$compiler"; then
-  _LT_COMPILER_NO_RTTI($1)
-  _LT_COMPILER_PIC($1)
-  _LT_COMPILER_C_O($1)
-  _LT_COMPILER_FILE_LOCKS($1)
-  _LT_LINKER_SHLIBS($1)
-  _LT_SYS_DYNAMIC_LINKER($1)
-  _LT_LINKER_HARDCODE_LIBPATH($1)
-  LT_SYS_DLOPEN_SELF
-  _LT_CMD_STRIPLIB
-
-  # Report which library types will actually be built
-  AC_MSG_CHECKING([if libtool supports shared libraries])
-  AC_MSG_RESULT([$can_build_shared])
-
-  AC_MSG_CHECKING([whether to build shared libraries])
-  test "$can_build_shared" = "no" && enable_shared=no
-
-  # On AIX, shared libraries and static libraries use the same namespace, and
-  # are all built from PIC.
-  case $host_os in
-  aix3*)
-    test "$enable_shared" = yes && enable_static=no
-    if test -n "$RANLIB"; then
-      archive_cmds="$archive_cmds~\$RANLIB \$lib"
-      postinstall_cmds='$RANLIB $lib'
-    fi
-    ;;
-
-  aix[[4-9]]*)
-    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-      test "$enable_shared" = yes && enable_static=no
-    fi
-    ;;
-  esac
-  AC_MSG_RESULT([$enable_shared])
-
-  AC_MSG_CHECKING([whether to build static libraries])
-  # Make sure either enable_shared or enable_static is yes.
-  test "$enable_shared" = yes || enable_static=yes
-  AC_MSG_RESULT([$enable_static])
-
-  _LT_CONFIG($1)
-fi
-AC_LANG_POP
-CC="$lt_save_CC"
-])# _LT_LANG_C_CONFIG
-
-
-# _LT_PROG_CXX
-# ------------
-# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++
-# compiler, we have our own version here.
-m4_defun([_LT_PROG_CXX],
-[
-pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])
-AC_PROG_CXX
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
-    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
-    (test "X$CXX" != "Xg++"))) ; then
-  AC_PROG_CXXCPP
-else
-  _lt_caught_CXX_error=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_CXX
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_CXX], [])
-
-
-# _LT_LANG_CXX_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a C++ compiler are suitably
-# defined.  These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_CXX_CONFIG],
-[AC_REQUIRE([_LT_PROG_CXX])dnl
-m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-m4_require([_LT_DECL_EGREP])dnl
-
-AC_LANG_PUSH(C++)
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(compiler_needs_object, $1)=no
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for C++ test sources.
-ac_ext=cpp
-
-# Object file extension for compiled C++ test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the CXX compiler isn't working.  Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_caught_CXX_error" != yes; then
-  # Code to be used in simple compile tests
-  lt_simple_compile_test_code="int some_variable = 0;"
-
-  # Code to be used in simple link tests
-  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'
-
-  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
-  _LT_TAG_COMPILER
-
-  # save warnings/boilerplate of simple test code
-  _LT_COMPILER_BOILERPLATE
-  _LT_LINKER_BOILERPLATE
-
-  # Allow CC to be a program name with arguments.
-  lt_save_CC=$CC
-  lt_save_LD=$LD
-  lt_save_GCC=$GCC
-  GCC=$GXX
-  lt_save_with_gnu_ld=$with_gnu_ld
-  lt_save_path_LD=$lt_cv_path_LD
-  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
-    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
-  else
-    $as_unset lt_cv_prog_gnu_ld
-  fi
-  if test -n "${lt_cv_path_LDCXX+set}"; then
-    lt_cv_path_LD=$lt_cv_path_LDCXX
-  else
-    $as_unset lt_cv_path_LD
-  fi
-  test -z "${LDCXX+set}" || LD=$LDCXX
-  CC=${CXX-"c++"}
-  compiler=$CC
-  _LT_TAGVAR(compiler, $1)=$CC
-  _LT_CC_BASENAME([$compiler])
-
-  if test -n "$compiler"; then
-    # We don't want -fno-exception when compiling C++ code, so set the
-    # no_builtin_flag separately
-    if test "$GXX" = yes; then
-      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
-    else
-      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-    fi
-
-    if test "$GXX" = yes; then
-      # Set up default GNU C++ configuration
-
-      LT_PATH_LD
-
-      # Check if GNU C++ uses GNU ld as the underlying linker, since the
-      # archiving commands below assume that GNU ld is being used.
-      if test "$with_gnu_ld" = yes; then
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-        # If archive_cmds runs LD, not CC, wlarc should be empty
-        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
-        #     investigate it a little bit more. (MM)
-        wlarc='${wl}'
-
-        # ancient GNU ld didn't support --whole-archive et. al.
-        if eval "`$CC -print-prog-name=ld` --help 2>&1" |
-	  $GREP 'no-whole-archive' > /dev/null; then
-          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-        else
-          _LT_TAGVAR(whole_archive_flag_spec, $1)=
-        fi
-      else
-        with_gnu_ld=no
-        wlarc=
-
-        # A generic and very simple default shared library creation
-        # command for GNU C++ for the case where it uses the native
-        # linker, instead of GNU ld.  If possible, this setting should
-        # overridden to take advantage of the native linker features on
-        # the platform it is being used on.
-        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-      fi
-
-      # Commands to make compiler produce verbose output that lists
-      # what "hidden" libraries, object files and flags are used when
-      # linking a shared library.
-      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
-
-    else
-      GXX=no
-      with_gnu_ld=no
-      wlarc=
-    fi
-
-    # PORTME: fill in a description of your system's C++ link characteristics
-    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])
-    _LT_TAGVAR(ld_shlibs, $1)=yes
-    case $host_os in
-      aix3*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-      aix[[4-9]]*)
-        if test "$host_cpu" = ia64; then
-          # On IA64, the linker does run time linking by default, so we don't
-          # have to do anything special.
-          aix_use_runtimelinking=no
-          exp_sym_flag='-Bexport'
-          no_entry_flag=""
-        else
-          aix_use_runtimelinking=no
-
-          # Test if we are trying to use run time linking or normal
-          # AIX style linking. If -brtl is somewhere in LDFLAGS, we
-          # need to do runtime linking.
-          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
-	    for ld_flag in $LDFLAGS; do
-	      case $ld_flag in
-	      *-brtl*)
-	        aix_use_runtimelinking=yes
-	        break
-	        ;;
-	      esac
-	    done
-	    ;;
-          esac
-
-          exp_sym_flag='-bexport'
-          no_entry_flag='-bnoentry'
-        fi
-
-        # When large executables or shared objects are built, AIX ld can
-        # have problems creating the table of contents.  If linking a library
-        # or program results in "error TOC overflow" add -mminimal-toc to
-        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not
-        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
-
-        _LT_TAGVAR(archive_cmds, $1)=''
-        _LT_TAGVAR(hardcode_direct, $1)=yes
-        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-        _LT_TAGVAR(link_all_deplibs, $1)=yes
-        _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
-
-        if test "$GXX" = yes; then
-          case $host_os in aix4.[[012]]|aix4.[[012]].*)
-          # We only want to do this on AIX 4.2 and lower, the check
-          # below for broken collect2 doesn't work under 4.3+
-	  collect2name=`${CC} -print-prog-name=collect2`
-	  if test -f "$collect2name" &&
-	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null
-	  then
-	    # We have reworked collect2
-	    :
-	  else
-	    # We have old collect2
-	    _LT_TAGVAR(hardcode_direct, $1)=unsupported
-	    # It fails to find uninstalled libraries when the uninstalled
-	    # path is not listed in the libpath.  Setting hardcode_minus_L
-	    # to unsupported forces relinking
-	    _LT_TAGVAR(hardcode_minus_L, $1)=yes
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-	    _LT_TAGVAR(hardcode_libdir_separator, $1)=
-	  fi
-          esac
-          shared_flag='-shared'
-	  if test "$aix_use_runtimelinking" = yes; then
-	    shared_flag="$shared_flag "'${wl}-G'
-	  fi
-        else
-          # not using gcc
-          if test "$host_cpu" = ia64; then
-	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
-	  # chokes on -Wl,-G. The following line is correct:
-	  shared_flag='-G'
-          else
-	    if test "$aix_use_runtimelinking" = yes; then
-	      shared_flag='${wl}-G'
-	    else
-	      shared_flag='${wl}-bM:SRE'
-	    fi
-          fi
-        fi
-
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
-        # It seems that -bexpall does not export symbols beginning with
-        # underscore (_), so it is better to generate a list of symbols to
-	# export.
-        _LT_TAGVAR(always_export_symbols, $1)=yes
-        if test "$aix_use_runtimelinking" = yes; then
-          # Warning - without using the other runtime loading flags (-brtl),
-          # -berok will link without error, but may produce a broken library.
-          _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
-          # Determine the default libpath from the value encoded in an empty
-          # executable.
-          _LT_SYS_MODULE_PATH_AIX
-          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-
-          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
-        else
-          if test "$host_cpu" = ia64; then
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
-	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
-	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
-          else
-	    # Determine the default libpath from the value encoded in an
-	    # empty executable.
-	    _LT_SYS_MODULE_PATH_AIX
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
-	    # Warning - without using the other run time loading flags,
-	    # -berok will link without error, but may produce a broken library.
-	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
-	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
-	    # Exported symbols can be pulled into shared objects from archives
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
-	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes
-	    # This is similar to how AIX traditionally builds its shared
-	    # libraries.
-	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
-          fi
-        fi
-        ;;
-
-      beos*)
-	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
-	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc
-	  # support --undefined.  This deserves some investigation.  FIXME
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	else
-	  _LT_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-
-      chorus*)
-        case $cc_basename in
-          *)
-	  # FIXME: insert proper C++ library support
-	  _LT_TAGVAR(ld_shlibs, $1)=no
-	  ;;
-        esac
-        ;;
-
-      cygwin* | mingw* | pw32* | cegcc*)
-        # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
-        # as there is no search path for DLLs.
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
-        _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
-        _LT_TAGVAR(always_export_symbols, $1)=no
-        _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
-
-        if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
-          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-          # If the export-symbols file already is a .def file (1st line
-          # is EXPORTS), use it as is; otherwise, prepend...
-          _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
-	    cp $export_symbols $output_objdir/$soname.def;
-          else
-	    echo EXPORTS > $output_objdir/$soname.def;
-	    cat $export_symbols >> $output_objdir/$soname.def;
-          fi~
-          $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
-        else
-          _LT_TAGVAR(ld_shlibs, $1)=no
-        fi
-        ;;
-      darwin* | rhapsody*)
-        _LT_DARWIN_LINKER_FEATURES($1)
-	;;
-
-      dgux*)
-        case $cc_basename in
-          ec++*)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          ghcx*)
-	    # Green Hills C++ Compiler
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          *)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-        esac
-        ;;
-
-      freebsd[[12]]*)
-        # C++ shared libraries reported to be fairly broken before
-	# switch to ELF
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-
-      freebsd-elf*)
-        _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-        ;;
-
-      freebsd* | dragonfly*)
-        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
-        # conventions
-        _LT_TAGVAR(ld_shlibs, $1)=yes
-        ;;
-
-      gnu*)
-        ;;
-
-      hpux9*)
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-        _LT_TAGVAR(hardcode_direct, $1)=yes
-        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-				             # but as the default
-				             # location of the library.
-
-        case $cc_basename in
-          CC*)
-            # FIXME: insert proper C++ library support
-            _LT_TAGVAR(ld_shlibs, $1)=no
-            ;;
-          aCC*)
-            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-            # Commands to make compiler produce verbose output that lists
-            # what "hidden" libraries, object files and flags are used when
-            # linking a shared library.
-            #
-            # There doesn't appear to be a way to prevent this compiler from
-            # explicitly linking system object files so we need to strip them
-            # from the output so that they don't get included in the library
-            # dependencies.
-            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
-            ;;
-          *)
-            if test "$GXX" = yes; then
-              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
-            else
-              # FIXME: insert proper C++ library support
-              _LT_TAGVAR(ld_shlibs, $1)=no
-            fi
-            ;;
-        esac
-        ;;
-
-      hpux10*|hpux11*)
-        if test $with_gnu_ld = no; then
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
-	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-          case $host_cpu in
-            hppa*64*|ia64*)
-              ;;
-            *)
-	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-              ;;
-          esac
-        fi
-        case $host_cpu in
-          hppa*64*|ia64*)
-            _LT_TAGVAR(hardcode_direct, $1)=no
-            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-            ;;
-          *)
-            _LT_TAGVAR(hardcode_direct, $1)=yes
-            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
-					         # but as the default
-					         # location of the library.
-            ;;
-        esac
-
-        case $cc_basename in
-          CC*)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          aCC*)
-	    case $host_cpu in
-	      hppa*64*)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	        ;;
-	      ia64*)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	        ;;
-	      *)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	        ;;
-	    esac
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    #
-	    # There doesn't appear to be a way to prevent this compiler from
-	    # explicitly linking system object files so we need to strip them
-	    # from the output so that they don't get included in the library
-	    # dependencies.
-	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
-	    ;;
-          *)
-	    if test "$GXX" = yes; then
-	      if test $with_gnu_ld = no; then
-	        case $host_cpu in
-	          hppa*64*)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	            ;;
-	          ia64*)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	            ;;
-	          *)
-	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	            ;;
-	        esac
-	      fi
-	    else
-	      # FIXME: insert proper C++ library support
-	      _LT_TAGVAR(ld_shlibs, $1)=no
-	    fi
-	    ;;
-        esac
-        ;;
-
-      interix[[3-9]]*)
-	_LT_TAGVAR(hardcode_direct, $1)=no
-	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
-	# Instead, shared libraries are loaded at an image base (0x10000000 by
-	# default) and relocated if they conflict, which is a slow very memory
-	# consuming and fragmenting process.  To avoid this, we pick a random,
-	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
-	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.
-	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
-	;;
-      irix5* | irix6*)
-        case $cc_basename in
-          CC*)
-	    # SGI C++
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-
-	    # Archives containing C++ object files must be created using
-	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is
-	    # necessary to make sure instantiated templates are included
-	    # in the archive.
-	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
-	    ;;
-          *)
-	    if test "$GXX" = yes; then
-	      if test "$with_gnu_ld" = no; then
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-	      else
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'
-	      fi
-	    fi
-	    _LT_TAGVAR(link_all_deplibs, $1)=yes
-	    ;;
-        esac
-        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-        _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-        _LT_TAGVAR(inherit_rpath, $1)=yes
-        ;;
-
-      linux* | k*bsd*-gnu | kopensolaris*-gnu)
-        case $cc_basename in
-          KCC*)
-	    # Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	    # KCC will only create a shared library if the output file
-	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
-	    # to its proper name (with version) after linking.
-	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    #
-	    # There doesn't appear to be a way to prevent this compiler from
-	    # explicitly linking system object files so we need to strip them
-	    # from the output so that they don't get included in the library
-	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
-
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-
-	    # Archives containing C++ object files must be created using
-	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.
-	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'
-	    ;;
-	  icpc* | ecpc* )
-	    # Intel C++
-	    with_gnu_ld=yes
-	    # version 8.0 and above of icpc choke on multiply defined symbols
-	    # if we add $predep_objects and $postdep_objects, however 7.1 and
-	    # earlier do not add the objects themselves.
-	    case `$CC -V 2>&1` in
-	      *"Version 7."*)
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-		;;
-	      *)  # Version 8.0 or newer
-	        tmp_idyn=
-	        case $host_cpu in
-		  ia64*) tmp_idyn=' -i_dynamic';;
-		esac
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
-		;;
-	    esac
-	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
-	    ;;
-          pgCC* | pgcpp*)
-            # Portland Group C++ compiler
-	    case `$CC -V` in
-	    *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)
-	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
-		compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'
-	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
-		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~
-		$RANLIB $oldlib'
-	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
-		rm -rf $tpldir~
-		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
-		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-	      ;;
-	    *) # Version 6 will use weak symbols
-	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
-	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
-	      ;;
-	    esac
-
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-            ;;
-	  cxx*)
-	    # Compaq C++
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
-
-	    runpath_var=LD_RUN_PATH
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    #
-	    # There doesn't appear to be a way to prevent this compiler from
-	    # explicitly linking system object files so we need to strip them
-	    # from the output so that they don't get included in the library
-	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
-	    ;;
-	  xl*)
-	    # IBM XL 8.0 on PPC, with GNU ld
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-	    if test "x$supports_anon_versioning" = xyes; then
-	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
-		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-		echo "local: *; };" >> $output_objdir/$libname.ver~
-		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-	    fi
-	    ;;
-	  *)
-	    case `$CC -V 2>&1 | sed 5q` in
-	    *Sun\ C*)
-	      # Sun C++ 5.9
-	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
-	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'
-	      _LT_TAGVAR(compiler_needs_object, $1)=yes
-
-	      # Not sure whether something based on
-	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1
-	      # would be better.
-	      output_verbose_link_cmd='echo'
-
-	      # Archives containing C++ object files must be created using
-	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	      # necessary to make sure instantiated templates are included
-	      # in the archive.
-	      _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	      ;;
-	    esac
-	    ;;
-	esac
-	;;
-
-      lynxos*)
-        # FIXME: insert proper C++ library support
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	;;
-
-      m88k*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-	;;
-
-      mvs*)
-        case $cc_basename in
-          cxx*)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-	  *)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-	esac
-	;;
-
-      netbsd*)
-        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
-	  _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
-	  wlarc=
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	  _LT_TAGVAR(hardcode_direct, $1)=yes
-	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	fi
-	# Workaround some broken pre-1.5 toolchains
-	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
-	;;
-
-      *nto* | *qnx*)
-        _LT_TAGVAR(ld_shlibs, $1)=yes
-	;;
-
-      openbsd2*)
-        # C++ shared libraries are fairly broken
-	_LT_TAGVAR(ld_shlibs, $1)=no
-	;;
-
-      openbsd*)
-	if test -f /usr/libexec/ld.so; then
-	  _LT_TAGVAR(hardcode_direct, $1)=yes
-	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
-	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
-	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
-	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
-	  fi
-	  output_verbose_link_cmd=echo
-	else
-	  _LT_TAGVAR(ld_shlibs, $1)=no
-	fi
-	;;
-
-      osf3* | osf4* | osf5*)
-        case $cc_basename in
-          KCC*)
-	    # Kuck and Associates, Inc. (KAI) C++ Compiler
-
-	    # KCC will only create a shared library if the output file
-	    # ends with ".so" (or ".sl" for HP-UX), so rename the library
-	    # to its proper name (with version) after linking.
-	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
-
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
-	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	    # Archives containing C++ object files must be created using
-	    # the KAI C++ compiler.
-	    case $host in
-	      osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;
-	      *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;
-	    esac
-	    ;;
-          RCC*)
-	    # Rational C++ 2.4.1
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          cxx*)
-	    case $host in
-	      osf3*)
-	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-		;;
-	      *)
-	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'
-	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
-	          echo "-hidden">> $lib.exp~
-	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~
-	          $RM $lib.exp'
-	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
-		;;
-	    esac
-
-	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	    # Commands to make compiler produce verbose output that lists
-	    # what "hidden" libraries, object files and flags are used when
-	    # linking a shared library.
-	    #
-	    # There doesn't appear to be a way to prevent this compiler from
-	    # explicitly linking system object files so we need to strip them
-	    # from the output so that they don't get included in the library
-	    # dependencies.
-	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'
-	    ;;
-	  *)
-	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
-	      case $host in
-	        osf3*)
-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-		  ;;
-	        *)
-	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
-		  ;;
-	      esac
-
-	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
-	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:
-
-	      # Commands to make compiler produce verbose output that lists
-	      # what "hidden" libraries, object files and flags are used when
-	      # linking a shared library.
-	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
-
-	    else
-	      # FIXME: insert proper C++ library support
-	      _LT_TAGVAR(ld_shlibs, $1)=no
-	    fi
-	    ;;
-        esac
-        ;;
-
-      psos*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-
-      sunos4*)
-        case $cc_basename in
-          CC*)
-	    # Sun C++ 4.x
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          lcc*)
-	    # Lucid
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          *)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-        esac
-        ;;
-
-      solaris*)
-        case $cc_basename in
-          CC*)
-	    # Sun C++ 4.2, 5.x and Centerline C++
-            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes
-	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
-	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
-	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	    case $host_os in
-	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-	      *)
-		# The compiler driver will combine and reorder linker options,
-		# but understands `-z linker_flag'.
-	        # Supported since Solaris 2.6 (maybe 2.5.1?)
-		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
-	        ;;
-	    esac
-	    _LT_TAGVAR(link_all_deplibs, $1)=yes
-
-	    output_verbose_link_cmd='echo'
-
-	    # Archives containing C++ object files must be created using
-	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is
-	    # necessary to make sure instantiated templates are included
-	    # in the archive.
-	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'
-	    ;;
-          gcx*)
-	    # Green Hills C++ Compiler
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-
-	    # The C++ compiler must be used to create the archive.
-	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
-	    ;;
-          *)
-	    # GNU C++ compiler with Solaris linker
-	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then
-	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
-	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
-	        # Commands to make compiler produce verbose output that lists
-	        # what "hidden" libraries, object files and flags are used when
-	        # linking a shared library.
-	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
-	      else
-	        # g++ 2.7 appears to require `-G' NOT `-shared' on this
-	        # platform.
-	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
-	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
-		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
-
-	        # Commands to make compiler produce verbose output that lists
-	        # what "hidden" libraries, object files and flags are used when
-	        # linking a shared library.
-	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'
-	      fi
-
-	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
-	      case $host_os in
-		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
-		*)
-		  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
-		  ;;
-	      esac
-	    fi
-	    ;;
-        esac
-        ;;
-
-    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
-      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-      _LT_TAGVAR(archive_cmds_need_lc, $1)=no
-      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-      runpath_var='LD_RUN_PATH'
-
-      case $cc_basename in
-        CC*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-	*)
-	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	  ;;
-      esac
-      ;;
-
-      sysv5* | sco3.2v5* | sco5v6*)
-	# Note: We can NOT use -z defs as we might desire, because we do not
-	# link with -lc, and that would cause any symbols used from libc to
-	# always be unresolved, which means just about no library would
-	# ever link correctly.  If we're not using GNU ld we use -z text
-	# though, which does catch some bad symbols but isn't as heavy-handed
-	# as -z defs.
-	_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
-	_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
-	_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
-	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
-	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
-	_LT_TAGVAR(link_all_deplibs, $1)=yes
-	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
-	runpath_var='LD_RUN_PATH'
-
-	case $cc_basename in
-          CC*)
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    ;;
-	  *)
-	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
-	    ;;
-	esac
-      ;;
-
-      tandem*)
-        case $cc_basename in
-          NCC*)
-	    # NonStop-UX NCC 3.20
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-          *)
-	    # FIXME: insert proper C++ library support
-	    _LT_TAGVAR(ld_shlibs, $1)=no
-	    ;;
-        esac
-        ;;
-
-      vxworks*)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-
-      *)
-        # FIXME: insert proper C++ library support
-        _LT_TAGVAR(ld_shlibs, $1)=no
-        ;;
-    esac
-
-    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-    test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
-
-    _LT_TAGVAR(GCC, $1)="$GXX"
-    _LT_TAGVAR(LD, $1)="$LD"
-
-    ## CAVEAT EMPTOR:
-    ## There is no encapsulation within the following macros, do not change
-    ## the running order or otherwise move them around unless you know exactly
-    ## what you are doing...
-    _LT_SYS_HIDDEN_LIBDEPS($1)
-    _LT_COMPILER_PIC($1)
-    _LT_COMPILER_C_O($1)
-    _LT_COMPILER_FILE_LOCKS($1)
-    _LT_LINKER_SHLIBS($1)
-    _LT_SYS_DYNAMIC_LINKER($1)
-    _LT_LINKER_HARDCODE_LIBPATH($1)
-
-    _LT_CONFIG($1)
-  fi # test -n "$compiler"
-
-  CC=$lt_save_CC
-  LDCXX=$LD
-  LD=$lt_save_LD
-  GCC=$lt_save_GCC
-  with_gnu_ld=$lt_save_with_gnu_ld
-  lt_cv_path_LDCXX=$lt_cv_path_LD
-  lt_cv_path_LD=$lt_save_path_LD
-  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
-  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-fi # test "$_lt_caught_CXX_error" != yes
-
-AC_LANG_POP
-])# _LT_LANG_CXX_CONFIG
-
-
-# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
-# ---------------------------------
-# Figure out "hidden" library dependencies from verbose
-# compiler output when linking a shared library.
-# Parse the compiler output and extract the necessary
-# objects, libraries and library flags.
-m4_defun([_LT_SYS_HIDDEN_LIBDEPS],
-[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
-# Dependencies to place before and after the object being linked:
-_LT_TAGVAR(predep_objects, $1)=
-_LT_TAGVAR(postdep_objects, $1)=
-_LT_TAGVAR(predeps, $1)=
-_LT_TAGVAR(postdeps, $1)=
-_LT_TAGVAR(compiler_lib_search_path, $1)=
-
-dnl we can't use the lt_simple_compile_test_code here,
-dnl because it contains code intended for an executable,
-dnl not a library.  It's possible we should let each
-dnl tag define a new lt_????_link_test_code variable,
-dnl but it's only used here...
-m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF
-int a;
-void foo (void) { a = 0; }
-_LT_EOF
-], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF
-class Foo
-{
-public:
-  Foo (void) { a = 0; }
-private:
-  int a;
-};
-_LT_EOF
-], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF
-      subroutine foo
-      implicit none
-      integer*4 a
-      a=0
-      return
-      end
-_LT_EOF
-], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF
-      subroutine foo
-      implicit none
-      integer a
-      a=0
-      return
-      end
-_LT_EOF
-], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF
-public class foo {
-  private int a;
-  public void bar (void) {
-    a = 0;
-  }
-};
-_LT_EOF
-])
-dnl Parse the compiler output and extract the necessary
-dnl objects, libraries and library flags.
-if AC_TRY_EVAL(ac_compile); then
-  # Parse the compiler output and extract the necessary
-  # objects, libraries and library flags.
-
-  # Sentinel used to keep track of whether or not we are before
-  # the conftest object file.
-  pre_test_object_deps_done=no
-
-  for p in `eval "$output_verbose_link_cmd"`; do
-    case $p in
-
-    -L* | -R* | -l*)
-       # Some compilers place space between "-{L,R}" and the path.
-       # Remove the space.
-       if test $p = "-L" ||
-          test $p = "-R"; then
-	 prev=$p
-	 continue
-       else
-	 prev=
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 case $p in
-	 -L* | -R*)
-	   # Internal compiler library paths should come after those
-	   # provided the user.  The postdeps already come after the
-	   # user supplied libs so there is no need to process them.
-	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
-	     _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
-	   else
-	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
-	   fi
-	   ;;
-	 # The "-l" case would never come before the object being
-	 # linked, so don't bother handling this case.
-	 esac
-       else
-	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then
-	   _LT_TAGVAR(postdeps, $1)="${prev}${p}"
-	 else
-	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
-	 fi
-       fi
-       ;;
-
-    *.$objext)
-       # This assumes that the test object file only shows up
-       # once in the compiler output.
-       if test "$p" = "conftest.$objext"; then
-	 pre_test_object_deps_done=yes
-	 continue
-       fi
-
-       if test "$pre_test_object_deps_done" = no; then
-	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
-	   _LT_TAGVAR(predep_objects, $1)="$p"
-	 else
-	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
-	 fi
-       else
-	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
-	   _LT_TAGVAR(postdep_objects, $1)="$p"
-	 else
-	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
-	 fi
-       fi
-       ;;
-
-    *) ;; # Ignore the rest.
-
-    esac
-  done
-
-  # Clean up.
-  rm -f a.out a.exe
-else
-  echo "libtool.m4: error: problem compiling $1 test program"
-fi
-
-$RM -f confest.$objext
-
-# PORTME: override above test on systems where it is broken
-m4_if([$1], [CXX],
-[case $host_os in
-interix[[3-9]]*)
-  # Interix 3.5 installs completely hosed .la files for C++, so rather than
-  # hack all around it, let's just trust "g++" to DTRT.
-  _LT_TAGVAR(predep_objects,$1)=
-  _LT_TAGVAR(postdep_objects,$1)=
-  _LT_TAGVAR(postdeps,$1)=
-  ;;
-
-linux*)
-  case `$CC -V 2>&1 | sed 5q` in
-  *Sun\ C*)
-    # Sun C++ 5.9
-
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-
-solaris*)
-  case $cc_basename in
-  CC*)
-    # The more standards-conforming stlport4 library is
-    # incompatible with the Cstd library. Avoid specifying
-    # it if it's in CXXFLAGS. Ignore libCrun as
-    # -library=stlport4 depends on it.
-    case " $CXX $CXXFLAGS " in
-    *" -library=stlport4 "*)
-      solaris_use_stlport4=yes
-      ;;
-    esac
-
-    # Adding this requires a known-good setup of shared libraries for
-    # Sun compiler versions before 5.6, else PIC objects from an old
-    # archive will be linked into the output, leading to subtle bugs.
-    if test "$solaris_use_stlport4" != yes; then
-      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
-    fi
-    ;;
-  esac
-  ;;
-esac
-])
-
-case " $_LT_TAGVAR(postdeps, $1) " in
-*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;
-esac
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=
-if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
-fi
-_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
-    [The directories searched by this compiler when creating a shared library])
-_LT_TAGDECL([], [predep_objects], [1],
-    [Dependencies to place before and after the objects being linked to
-    create a shared library])
-_LT_TAGDECL([], [postdep_objects], [1])
-_LT_TAGDECL([], [predeps], [1])
-_LT_TAGDECL([], [postdeps], [1])
-_LT_TAGDECL([], [compiler_lib_search_path], [1],
-    [The library search path used internally by the compiler when linking
-    a shared library])
-])# _LT_SYS_HIDDEN_LIBDEPS
-
-
-# _LT_PROG_F77
-# ------------
-# Since AC_PROG_F77 is broken, in that it returns the empty string
-# if there is no fortran compiler, we have our own version here.
-m4_defun([_LT_PROG_F77],
-[
-pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])
-AC_PROG_F77
-if test -z "$F77" || test "X$F77" = "Xno"; then
-  _lt_disable_F77=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_F77
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_F77], [])
-
-
-# _LT_LANG_F77_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for a Fortran 77 compiler are
-# suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_F77_CONFIG],
-[AC_REQUIRE([_LT_PROG_F77])dnl
-AC_LANG_PUSH(Fortran 77)
-
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for f77 test sources.
-ac_ext=f
-
-# Object file extension for compiled f77 test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the F77 compiler isn't working.  Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_F77" != yes; then
-  # Code to be used in simple compile tests
-  lt_simple_compile_test_code="\
-      subroutine t
-      return
-      end
-"
-
-  # Code to be used in simple link tests
-  lt_simple_link_test_code="\
-      program t
-      end
-"
-
-  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
-  _LT_TAG_COMPILER
-
-  # save warnings/boilerplate of simple test code
-  _LT_COMPILER_BOILERPLATE
-  _LT_LINKER_BOILERPLATE
-
-  # Allow CC to be a program name with arguments.
-  lt_save_CC="$CC"
-  lt_save_GCC=$GCC
-  CC=${F77-"f77"}
-  compiler=$CC
-  _LT_TAGVAR(compiler, $1)=$CC
-  _LT_CC_BASENAME([$compiler])
-  GCC=$G77
-  if test -n "$compiler"; then
-    AC_MSG_CHECKING([if libtool supports shared libraries])
-    AC_MSG_RESULT([$can_build_shared])
-
-    AC_MSG_CHECKING([whether to build shared libraries])
-    test "$can_build_shared" = "no" && enable_shared=no
-
-    # On AIX, shared libraries and static libraries use the same namespace, and
-    # are all built from PIC.
-    case $host_os in
-      aix3*)
-        test "$enable_shared" = yes && enable_static=no
-        if test -n "$RANLIB"; then
-          archive_cmds="$archive_cmds~\$RANLIB \$lib"
-          postinstall_cmds='$RANLIB $lib'
-        fi
-        ;;
-      aix[[4-9]]*)
-	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-	  test "$enable_shared" = yes && enable_static=no
-	fi
-        ;;
-    esac
-    AC_MSG_RESULT([$enable_shared])
-
-    AC_MSG_CHECKING([whether to build static libraries])
-    # Make sure either enable_shared or enable_static is yes.
-    test "$enable_shared" = yes || enable_static=yes
-    AC_MSG_RESULT([$enable_static])
-
-    _LT_TAGVAR(GCC, $1)="$G77"
-    _LT_TAGVAR(LD, $1)="$LD"
-
-    ## CAVEAT EMPTOR:
-    ## There is no encapsulation within the following macros, do not change
-    ## the running order or otherwise move them around unless you know exactly
-    ## what you are doing...
-    _LT_COMPILER_PIC($1)
-    _LT_COMPILER_C_O($1)
-    _LT_COMPILER_FILE_LOCKS($1)
-    _LT_LINKER_SHLIBS($1)
-    _LT_SYS_DYNAMIC_LINKER($1)
-    _LT_LINKER_HARDCODE_LIBPATH($1)
-
-    _LT_CONFIG($1)
-  fi # test -n "$compiler"
-
-  GCC=$lt_save_GCC
-  CC="$lt_save_CC"
-fi # test "$_lt_disable_F77" != yes
-
-AC_LANG_POP
-])# _LT_LANG_F77_CONFIG
-
-
-# _LT_PROG_FC
-# -----------
-# Since AC_PROG_FC is broken, in that it returns the empty string
-# if there is no fortran compiler, we have our own version here.
-m4_defun([_LT_PROG_FC],
-[
-pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])
-AC_PROG_FC
-if test -z "$FC" || test "X$FC" = "Xno"; then
-  _lt_disable_FC=yes
-fi
-popdef([AC_MSG_ERROR])
-])# _LT_PROG_FC
-
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([_LT_PROG_FC], [])
-
-
-# _LT_LANG_FC_CONFIG([TAG])
-# -------------------------
-# Ensure that the configuration variables for a Fortran compiler are
-# suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_FC_CONFIG],
-[AC_REQUIRE([_LT_PROG_FC])dnl
-AC_LANG_PUSH(Fortran)
-
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-_LT_TAGVAR(allow_undefined_flag, $1)=
-_LT_TAGVAR(always_export_symbols, $1)=no
-_LT_TAGVAR(archive_expsym_cmds, $1)=
-_LT_TAGVAR(export_dynamic_flag_spec, $1)=
-_LT_TAGVAR(hardcode_direct, $1)=no
-_LT_TAGVAR(hardcode_direct_absolute, $1)=no
-_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
-_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=
-_LT_TAGVAR(hardcode_libdir_separator, $1)=
-_LT_TAGVAR(hardcode_minus_L, $1)=no
-_LT_TAGVAR(hardcode_automatic, $1)=no
-_LT_TAGVAR(inherit_rpath, $1)=no
-_LT_TAGVAR(module_cmds, $1)=
-_LT_TAGVAR(module_expsym_cmds, $1)=
-_LT_TAGVAR(link_all_deplibs, $1)=unknown
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-_LT_TAGVAR(no_undefined_flag, $1)=
-_LT_TAGVAR(whole_archive_flag_spec, $1)=
-_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no
-
-# Source file extension for fc test sources.
-ac_ext=${ac_fc_srcext-f}
-
-# Object file extension for compiled fc test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# No sense in running all these tests if we already determined that
-# the FC compiler isn't working.  Some variables (like enable_shared)
-# are currently assumed to apply to all compilers on this platform,
-# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_FC" != yes; then
-  # Code to be used in simple compile tests
-  lt_simple_compile_test_code="\
-      subroutine t
-      return
-      end
-"
-
-  # Code to be used in simple link tests
-  lt_simple_link_test_code="\
-      program t
-      end
-"
-
-  # ltmain only uses $CC for tagged configurations so make sure $CC is set.
-  _LT_TAG_COMPILER
-
-  # save warnings/boilerplate of simple test code
-  _LT_COMPILER_BOILERPLATE
-  _LT_LINKER_BOILERPLATE
-
-  # Allow CC to be a program name with arguments.
-  lt_save_CC="$CC"
-  lt_save_GCC=$GCC
-  CC=${FC-"f95"}
-  compiler=$CC
-  GCC=$ac_cv_fc_compiler_gnu
-
-  _LT_TAGVAR(compiler, $1)=$CC
-  _LT_CC_BASENAME([$compiler])
-
-  if test -n "$compiler"; then
-    AC_MSG_CHECKING([if libtool supports shared libraries])
-    AC_MSG_RESULT([$can_build_shared])
-
-    AC_MSG_CHECKING([whether to build shared libraries])
-    test "$can_build_shared" = "no" && enable_shared=no
-
-    # On AIX, shared libraries and static libraries use the same namespace, and
-    # are all built from PIC.
-    case $host_os in
-      aix3*)
-        test "$enable_shared" = yes && enable_static=no
-        if test -n "$RANLIB"; then
-          archive_cmds="$archive_cmds~\$RANLIB \$lib"
-          postinstall_cmds='$RANLIB $lib'
-        fi
-        ;;
-      aix[[4-9]]*)
-	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
-	  test "$enable_shared" = yes && enable_static=no
-	fi
-        ;;
-    esac
-    AC_MSG_RESULT([$enable_shared])
-
-    AC_MSG_CHECKING([whether to build static libraries])
-    # Make sure either enable_shared or enable_static is yes.
-    test "$enable_shared" = yes || enable_static=yes
-    AC_MSG_RESULT([$enable_static])
-
-    _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
-    _LT_TAGVAR(LD, $1)="$LD"
-
-    ## CAVEAT EMPTOR:
-    ## There is no encapsulation within the following macros, do not change
-    ## the running order or otherwise move them around unless you know exactly
-    ## what you are doing...
-    _LT_SYS_HIDDEN_LIBDEPS($1)
-    _LT_COMPILER_PIC($1)
-    _LT_COMPILER_C_O($1)
-    _LT_COMPILER_FILE_LOCKS($1)
-    _LT_LINKER_SHLIBS($1)
-    _LT_SYS_DYNAMIC_LINKER($1)
-    _LT_LINKER_HARDCODE_LIBPATH($1)
-
-    _LT_CONFIG($1)
-  fi # test -n "$compiler"
-
-  GCC=$lt_save_GCC
-  CC="$lt_save_CC"
-fi # test "$_lt_disable_FC" != yes
-
-AC_LANG_POP
-])# _LT_LANG_FC_CONFIG
-
-
-# _LT_LANG_GCJ_CONFIG([TAG])
-# --------------------------
-# Ensure that the configuration variables for the GNU Java Compiler compiler
-# are suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_GCJ_CONFIG],
-[AC_REQUIRE([LT_PROG_GCJ])dnl
-AC_LANG_SAVE
-
-# Source file extension for Java test sources.
-ac_ext=java
-
-# Object file extension for compiled Java test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code="class foo {}"
-
-# Code to be used in simple link tests
-lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_TAG_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-lt_save_GCC=$GCC
-GCC=yes
-CC=${GCJ-"gcj"}
-compiler=$CC
-_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
-_LT_CC_BASENAME([$compiler])
-
-# GCJ did not exist at the time GCC didn't implicitly link libc in.
-_LT_TAGVAR(archive_cmds_need_lc, $1)=no
-
-_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds
-
-## CAVEAT EMPTOR:
-## There is no encapsulation within the following macros, do not change
-## the running order or otherwise move them around unless you know exactly
-## what you are doing...
-if test -n "$compiler"; then
-  _LT_COMPILER_NO_RTTI($1)
-  _LT_COMPILER_PIC($1)
-  _LT_COMPILER_C_O($1)
-  _LT_COMPILER_FILE_LOCKS($1)
-  _LT_LINKER_SHLIBS($1)
-  _LT_LINKER_HARDCODE_LIBPATH($1)
-
-  _LT_CONFIG($1)
-fi
-
-AC_LANG_RESTORE
-
-GCC=$lt_save_GCC
-CC="$lt_save_CC"
-])# _LT_LANG_GCJ_CONFIG
-
-
-# _LT_LANG_RC_CONFIG([TAG])
-# -------------------------
-# Ensure that the configuration variables for the Windows resource compiler
-# are suitably defined.  These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
-m4_defun([_LT_LANG_RC_CONFIG],
-[AC_REQUIRE([LT_PROG_RC])dnl
-AC_LANG_SAVE
-
-# Source file extension for RC test sources.
-ac_ext=rc
-
-# Object file extension for compiled RC test sources.
-objext=o
-_LT_TAGVAR(objext, $1)=$objext
-
-# Code to be used in simple compile tests
-lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
-
-# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
-
-# ltmain only uses $CC for tagged configurations so make sure $CC is set.
-_LT_TAG_COMPILER
-
-# save warnings/boilerplate of simple test code
-_LT_COMPILER_BOILERPLATE
-_LT_LINKER_BOILERPLATE
-
-# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
-lt_save_GCC=$GCC
-GCC=
-CC=${RC-"windres"}
-compiler=$CC
-_LT_TAGVAR(compiler, $1)=$CC
-_LT_CC_BASENAME([$compiler])
-_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes
-
-if test -n "$compiler"; then
-  :
-  _LT_CONFIG($1)
-fi
-
-GCC=$lt_save_GCC
-AC_LANG_RESTORE
-CC="$lt_save_CC"
-])# _LT_LANG_RC_CONFIG
-
-
-# LT_PROG_GCJ
-# -----------
-AC_DEFUN([LT_PROG_GCJ],
-[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
-  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
-    [AC_CHECK_TOOL(GCJ, gcj,)
-      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
-      AC_SUBST(GCJFLAGS)])])[]dnl
-])
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_GCJ], [])
-
-
-# LT_PROG_RC
-# ----------
-AC_DEFUN([LT_PROG_RC],
-[AC_CHECK_TOOL(RC, windres,)
-])
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_RC], [])
-
-
-# _LT_DECL_EGREP
-# --------------
-# If we don't have a new enough Autoconf to choose the best grep
-# available, choose the one first in the user's PATH.
-m4_defun([_LT_DECL_EGREP],
-[AC_REQUIRE([AC_PROG_EGREP])dnl
-AC_REQUIRE([AC_PROG_FGREP])dnl
-test -z "$GREP" && GREP=grep
-_LT_DECL([], [GREP], [1], [A grep program that handles long lines])
-_LT_DECL([], [EGREP], [1], [An ERE matcher])
-_LT_DECL([], [FGREP], [1], [A literal string matcher])
-dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too
-AC_SUBST([GREP])
-])
-
-
-# _LT_DECL_OBJDUMP
-# --------------
-# If we don't have a new enough Autoconf to choose the best objdump
-# available, choose the one first in the user's PATH.
-m4_defun([_LT_DECL_OBJDUMP],
-[AC_CHECK_TOOL(OBJDUMP, objdump, false)
-test -z "$OBJDUMP" && OBJDUMP=objdump
-_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])
-AC_SUBST([OBJDUMP])
-])
-
-
-# _LT_DECL_SED
-# ------------
-# Check for a fully-functional sed program, that truncates
-# as few characters as possible.  Prefer GNU sed if found.
-m4_defun([_LT_DECL_SED],
-[AC_PROG_SED
-test -z "$SED" && SED=sed
-Xsed="$SED -e 1s/^X//"
-_LT_DECL([], [SED], [1], [A sed program that does not truncate output])
-_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],
-    [Sed that helps us avoid accidentally triggering echo(1) options like -n])
-])# _LT_DECL_SED
-
-m4_ifndef([AC_PROG_SED], [
-############################################################
-# NOTE: This macro has been submitted for inclusion into   #
-#  GNU Autoconf as AC_PROG_SED.  When it is available in   #
-#  a released version of Autoconf we should remove this    #
-#  macro and use it instead.                               #
-############################################################
-
-m4_defun([AC_PROG_SED],
-[AC_MSG_CHECKING([for a sed that does not truncate output])
-AC_CACHE_VAL(lt_cv_path_SED,
-[# Loop through the user's path and test for sed and gsed.
-# Then use that list of sed's as ones to test for truncation.
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for lt_ac_prog in sed gsed; do
-    for ac_exec_ext in '' $ac_executable_extensions; do
-      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
-        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
-      fi
-    done
-  done
-done
-IFS=$as_save_IFS
-lt_ac_max=0
-lt_ac_count=0
-# Add /usr/xpg4/bin/sed as it is typically found on Solaris
-# along with /bin/sed that truncates output.
-for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
-  test ! -f $lt_ac_sed && continue
-  cat /dev/null > conftest.in
-  lt_ac_count=0
-  echo $ECHO_N "0123456789$ECHO_C" >conftest.in
-  # Check for GNU sed and select it if it is found.
-  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
-    lt_cv_path_SED=$lt_ac_sed
-    break
-  fi
-  while true; do
-    cat conftest.in conftest.in >conftest.tmp
-    mv conftest.tmp conftest.in
-    cp conftest.in conftest.nl
-    echo >>conftest.nl
-    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
-    cmp -s conftest.out conftest.nl || break
-    # 10000 chars as input seems more than enough
-    test $lt_ac_count -gt 10 && break
-    lt_ac_count=`expr $lt_ac_count + 1`
-    if test $lt_ac_count -gt $lt_ac_max; then
-      lt_ac_max=$lt_ac_count
-      lt_cv_path_SED=$lt_ac_sed
-    fi
-  done
-done
-])
-SED=$lt_cv_path_SED
-AC_SUBST([SED])
-AC_MSG_RESULT([$SED])
-])#AC_PROG_SED
-])#m4_ifndef
-
-# Old name:
-AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])
-dnl aclocal-1.4 backwards compatibility:
-dnl AC_DEFUN([LT_AC_PROG_SED], [])
-
-
-# _LT_CHECK_SHELL_FEATURES
-# ------------------------
-# Find out whether the shell is Bourne or XSI compatible,
-# or has some other useful features.
-m4_defun([_LT_CHECK_SHELL_FEATURES],
-[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
-  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \
-      = c,a/b,, \
-    && eval 'test $(( 1 + 1 )) -eq 2 \
-    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
-  && xsi_shell=yes
-AC_MSG_RESULT([$xsi_shell])
-_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
-
-AC_MSG_CHECKING([whether the shell understands "+="])
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
-    >/dev/null 2>&1 \
-  && lt_shell_append=yes
-AC_MSG_RESULT([$lt_shell_append])
-_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
-
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
-  lt_unset=unset
-else
-  lt_unset=false
-fi
-_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl
-
-# test EBCDIC or ASCII
-case `echo X|tr X '\101'` in
- A) # ASCII based system
-    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr
-  lt_SP2NL='tr \040 \012'
-  lt_NL2SP='tr \015\012 \040\040'
-  ;;
- *) # EBCDIC based system
-  lt_SP2NL='tr \100 \n'
-  lt_NL2SP='tr \r\n \100\100'
-  ;;
-esac
-_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl
-_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl
-])# _LT_CHECK_SHELL_FEATURES
-
-
-# _LT_PROG_XSI_SHELLFNS
-# ---------------------
-# Bourne and XSI compatible variants of some useful shell functions.
-m4_defun([_LT_PROG_XSI_SHELLFNS],
-[case $xsi_shell in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result="${1##*/}"
-}
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
-# call:
-#   dirname:  Compute the dirname of FILE.  If nonempty,
-#             add APPEND to the result, otherwise set result
-#             to NONDIR_REPLACEMENT.
-#             value returned in "$func_dirname_result"
-#   basename: Compute filename of FILE.
-#             value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
-{
-  case ${1} in
-    */*) func_dirname_result="${1%/*}${2}" ;;
-    *  ) func_dirname_result="${3}" ;;
-  esac
-  func_basename_result="${1##*/}"
-}
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-func_stripname ()
-{
-  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
-  # positional parameters, so assign one to ordinary parameter first.
-  func_stripname_result=${3}
-  func_stripname_result=${func_stripname_result#"${1}"}
-  func_stripname_result=${func_stripname_result%"${2}"}
-}
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=${1%%=*}
-  func_opt_split_arg=${1#*=}
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  case ${1} in
-    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
-    *)    func_lo2o_result=${1} ;;
-  esac
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=${1%.*}.lo
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=$(( $[*] ))
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=${#1}
-}
-
-_LT_EOF
-    ;;
-  *) # Bourne compatible functions.
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_dirname file append nondir_replacement
-# Compute the dirname of FILE.  If nonempty, add APPEND to the result,
-# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
-{
-  # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
-  if test "X$func_dirname_result" = "X${1}"; then
-    func_dirname_result="${3}"
-  else
-    func_dirname_result="$func_dirname_result${2}"
-  fi
-}
-
-# func_basename file
-func_basename ()
-{
-  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
-}
-
-dnl func_dirname_and_basename
-dnl A portable version of this function is already defined in general.m4sh
-dnl so there is no need for it here.
-
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
-{
-  case ${2} in
-    .*) func_stripname_result=`$ECHO "X${3}" \
-           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;
-    *)  func_stripname_result=`$ECHO "X${3}" \
-           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;
-  esac
-}
-
-# sed scripts:
-my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'
-my_sed_long_arg='1s/^-[[^=]]*=//'
-
-# func_opt_split
-func_opt_split ()
-{
-  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`
-  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`
-}
-
-# func_lo2o object
-func_lo2o ()
-{
-  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`
-}
-
-# func_xform libobj-or-source
-func_xform ()
-{
-  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`
-}
-
-# func_arith arithmetic-term...
-func_arith ()
-{
-  func_arith_result=`expr "$[@]"`
-}
-
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
-{
-  func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`
-}
-
-_LT_EOF
-esac
-
-case $lt_shell_append in
-  yes)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$[1]+=\$[2]"
-}
-_LT_EOF
-    ;;
-  *)
-    cat << \_LT_EOF >> "$cfgfile"
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
-{
-  eval "$[1]=\$$[1]\$[2]"
-}
-
-_LT_EOF
-    ;;
-  esac
-])
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-

+#

+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,

+#                 2006, 2007, 2008 Free Software Foundation, Inc.

+#   Written by Gordon Matzigkeit, 1996

+#

+# This file is free software; the Free Software Foundation gives

+# unlimited permission to copy and/or distribute it, with or without

+# modifications, as long as this notice is preserved.

+

+m4_define([_LT_COPYING], [dnl

+#   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,

+#                 2006, 2007, 2008 Free Software Foundation, Inc.

+#   Written by Gordon Matzigkeit, 1996

+#

+#   This file is part of GNU Libtool.

+#

+# GNU Libtool is free software; you can redistribute it and/or

+# modify it under the terms of the GNU General Public License as

+# published by the Free Software Foundation; either version 2 of

+# the License, or (at your option) any later version.

+#

+# As a special exception to the GNU General Public License,

+# if you distribute this file as part of a program or library that

+# is built using GNU Libtool, you may include this file under the

+# same distribution terms that you use for the rest of that program.

+#

+# GNU Libtool is distributed in the hope that it will be useful,

+# but WITHOUT ANY WARRANTY; without even the implied warranty of

+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

+# GNU General Public License for more details.

+#

+# You should have received a copy of the GNU General Public License

+# along with GNU Libtool; see the file COPYING.  If not, a copy

+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or

+# obtained by writing to the Free Software Foundation, Inc.,

+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.

+])

+

+# serial 56 LT_INIT

+

+

+# LT_PREREQ(VERSION)

+# ------------------

+# Complain and exit if this libtool version is less that VERSION.

+m4_defun([LT_PREREQ],

+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,

+       [m4_default([$3],

+		   [m4_fatal([Libtool version $1 or higher is required],

+		             63)])],

+       [$2])])

+

+

+# _LT_CHECK_BUILDDIR

+# ------------------

+# Complain if the absolute build directory name contains unusual characters

+m4_defun([_LT_CHECK_BUILDDIR],

+[case `pwd` in

+  *\ * | *\	*)

+    AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;

+esac

+])

+

+

+# LT_INIT([OPTIONS])

+# ------------------

+AC_DEFUN([LT_INIT],

+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT

+AC_BEFORE([$0], [LT_LANG])dnl

+AC_BEFORE([$0], [LT_OUTPUT])dnl

+AC_BEFORE([$0], [LTDL_INIT])dnl

+m4_require([_LT_CHECK_BUILDDIR])dnl

+

+dnl Autoconf doesn't catch unexpanded LT_ macros by default:

+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl

+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl

+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4

+dnl unless we require an AC_DEFUNed macro:

+AC_REQUIRE([LTOPTIONS_VERSION])dnl

+AC_REQUIRE([LTSUGAR_VERSION])dnl

+AC_REQUIRE([LTVERSION_VERSION])dnl

+AC_REQUIRE([LTOBSOLETE_VERSION])dnl

+m4_require([_LT_PROG_LTMAIN])dnl

+

+dnl Parse OPTIONS

+_LT_SET_OPTIONS([$0], [$1])

+

+# This can be used to rebuild libtool when needed

+LIBTOOL_DEPS="$ltmain"

+

+# Always use our own libtool.

+LIBTOOL='$(SHELL) $(top_builddir)/libtool'

+AC_SUBST(LIBTOOL)dnl

+

+_LT_SETUP

+

+# Only expand once:

+m4_define([LT_INIT])

+])# LT_INIT

+

+# Old names:

+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])

+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])

+dnl aclocal-1.4 backwards compatibility:

+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])

+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])

+

+

+# _LT_CC_BASENAME(CC)

+# -------------------

+# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.

+m4_defun([_LT_CC_BASENAME],

+[for cc_temp in $1""; do

+  case $cc_temp in

+    compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;

+    distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;

+    \-*) ;;

+    *) break;;

+  esac

+done

+cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`

+])

+

+

+# _LT_FILEUTILS_DEFAULTS

+# ----------------------

+# It is okay to use these file commands and assume they have been set

+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.

+m4_defun([_LT_FILEUTILS_DEFAULTS],

+[: ${CP="cp -f"}

+: ${MV="mv -f"}

+: ${RM="rm -f"}

+])# _LT_FILEUTILS_DEFAULTS

+

+

+# _LT_SETUP

+# ---------

+m4_defun([_LT_SETUP],

+[AC_REQUIRE([AC_CANONICAL_HOST])dnl

+AC_REQUIRE([AC_CANONICAL_BUILD])dnl

+_LT_DECL([], [host_alias], [0], [The host system])dnl

+_LT_DECL([], [host], [0])dnl

+_LT_DECL([], [host_os], [0])dnl

+dnl

+_LT_DECL([], [build_alias], [0], [The build system])dnl

+_LT_DECL([], [build], [0])dnl

+_LT_DECL([], [build_os], [0])dnl

+dnl

+AC_REQUIRE([AC_PROG_CC])dnl

+AC_REQUIRE([LT_PATH_LD])dnl

+AC_REQUIRE([LT_PATH_NM])dnl

+dnl

+AC_REQUIRE([AC_PROG_LN_S])dnl

+test -z "$LN_S" && LN_S="ln -s"

+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl

+dnl

+AC_REQUIRE([LT_CMD_MAX_LEN])dnl

+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl

+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl

+dnl

+m4_require([_LT_FILEUTILS_DEFAULTS])dnl

+m4_require([_LT_CHECK_SHELL_FEATURES])dnl

+m4_require([_LT_CMD_RELOAD])dnl

+m4_require([_LT_CHECK_MAGIC_METHOD])dnl

+m4_require([_LT_CMD_OLD_ARCHIVE])dnl

+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl

+

+_LT_CONFIG_LIBTOOL_INIT([

+# See if we are running on zsh, and set the options which allow our

+# commands through without removal of \ escapes INIT.

+if test -n "\${ZSH_VERSION+set}" ; then

+   setopt NO_GLOB_SUBST

+fi

+])

+if test -n "${ZSH_VERSION+set}" ; then

+   setopt NO_GLOB_SUBST

+fi

+

+_LT_CHECK_OBJDIR

+

+m4_require([_LT_TAG_COMPILER])dnl

+_LT_PROG_ECHO_BACKSLASH

+

+case $host_os in

+aix3*)

+  # AIX sometimes has problems with the GCC collect2 program.  For some

+  # reason, if we set the COLLECT_NAMES environment variable, the problems

+  # vanish in a puff of smoke.

+  if test "X${COLLECT_NAMES+set}" != Xset; then

+    COLLECT_NAMES=

+    export COLLECT_NAMES

+  fi

+  ;;

+esac

+

+# Sed substitution that helps us do robust quoting.  It backslashifies

+# metacharacters that are still active within double-quoted strings.

+sed_quote_subst='s/\([["`$\\]]\)/\\\1/g'

+

+# Same as above, but do not quote variable references.

+double_quote_subst='s/\([["`\\]]\)/\\\1/g'

+

+# Sed substitution to delay expansion of an escaped shell variable in a

+# double_quote_subst'ed string.

+delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'

+

+# Sed substitution to delay expansion of an escaped single quote.

+delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g'

+

+# Sed substitution to avoid accidental globbing in evaled expressions

+no_glob_subst='s/\*/\\\*/g'

+

+# Global variables:

+ofile=libtool

+can_build_shared=yes

+

+# All known linkers require a `.a' archive for static linking (except MSVC,

+# which needs '.lib').

+libext=a

+

+with_gnu_ld="$lt_cv_prog_gnu_ld"

+

+old_CC="$CC"

+old_CFLAGS="$CFLAGS"

+

+# Set sane defaults for various variables

+test -z "$CC" && CC=cc

+test -z "$LTCC" && LTCC=$CC

+test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS

+test -z "$LD" && LD=ld

+test -z "$ac_objext" && ac_objext=o

+

+_LT_CC_BASENAME([$compiler])

+

+# Only perform the check for file, if the check method requires it

+test -z "$MAGIC_CMD" && MAGIC_CMD=file

+case $deplibs_check_method in

+file_magic*)

+  if test "$file_magic_cmd" = '$MAGIC_CMD'; then

+    _LT_PATH_MAGIC

+  fi

+  ;;

+esac

+

+# Use C for the default configuration in the libtool script

+LT_SUPPORTED_TAG([CC])

+_LT_LANG_C_CONFIG

+_LT_LANG_DEFAULT_CONFIG

+_LT_CONFIG_COMMANDS

+])# _LT_SETUP

+

+

+# _LT_PROG_LTMAIN

+# ---------------

+# Note that this code is called both from `configure', and `config.status'

+# now that we use AC_CONFIG_COMMANDS to generate libtool.  Notably,

+# `config.status' has no value for ac_aux_dir unless we are using Automake,

+# so we pass a copy along to make sure it has a sensible value anyway.

+m4_defun([_LT_PROG_LTMAIN],

+[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl

+_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])

+ltmain="$ac_aux_dir/ltmain.sh"

+])# _LT_PROG_LTMAIN

+

+

+## ------------------------------------- ##

+## Accumulate code for creating libtool. ##

+## ------------------------------------- ##

+

+# So that we can recreate a full libtool script including additional

+# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS

+# in macros and then make a single call at the end using the `libtool'

+# label.

+

+

+# _LT_CONFIG_LIBTOOL_INIT([INIT-COMMANDS])

+# ----------------------------------------

+# Register INIT-COMMANDS to be passed to AC_CONFIG_COMMANDS later.

+m4_define([_LT_CONFIG_LIBTOOL_INIT],

+[m4_ifval([$1],

+          [m4_append([_LT_OUTPUT_LIBTOOL_INIT],

+                     [$1

+])])])

+

+# Initialize.

+m4_define([_LT_OUTPUT_LIBTOOL_INIT])

+

+

+# _LT_CONFIG_LIBTOOL([COMMANDS])

+# ------------------------------

+# Register COMMANDS to be passed to AC_CONFIG_COMMANDS later.

+m4_define([_LT_CONFIG_LIBTOOL],

+[m4_ifval([$1],

+          [m4_append([_LT_OUTPUT_LIBTOOL_COMMANDS],

+                     [$1

+])])])

+

+# Initialize.

+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS])

+

+

+# _LT_CONFIG_SAVE_COMMANDS([COMMANDS], [INIT_COMMANDS])

+# -----------------------------------------------------

+m4_defun([_LT_CONFIG_SAVE_COMMANDS],

+[_LT_CONFIG_LIBTOOL([$1])

+_LT_CONFIG_LIBTOOL_INIT([$2])

+])

+

+

+# _LT_FORMAT_COMMENT([COMMENT])

+# -----------------------------

+# Add leading comment marks to the start of each line, and a trailing

+# full-stop to the whole comment if one is not present already.

+m4_define([_LT_FORMAT_COMMENT],

+[m4_ifval([$1], [

+m4_bpatsubst([m4_bpatsubst([$1], [^ *], [# ])],

+              [['`$\]], [\\\&])]m4_bmatch([$1], [[!?.]$], [], [.])

+)])

+

+

+

+## ------------------------ ##

+## FIXME: Eliminate VARNAME ##

+## ------------------------ ##

+

+

+# _LT_DECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION], [IS-TAGGED?])

+# -------------------------------------------------------------------

+# CONFIGNAME is the name given to the value in the libtool script.

+# VARNAME is the (base) name used in the configure script.

+# VALUE may be 0, 1 or 2 for a computed quote escaped value based on

+# VARNAME.  Any other value will be used directly.

+m4_define([_LT_DECL],

+[lt_if_append_uniq([lt_decl_varnames], [$2], [, ],

+    [lt_dict_add_subkey([lt_decl_dict], [$2], [libtool_name],

+	[m4_ifval([$1], [$1], [$2])])

+    lt_dict_add_subkey([lt_decl_dict], [$2], [value], [$3])

+    m4_ifval([$4],

+	[lt_dict_add_subkey([lt_decl_dict], [$2], [description], [$4])])

+    lt_dict_add_subkey([lt_decl_dict], [$2],

+	[tagged?], [m4_ifval([$5], [yes], [no])])])

+])

+

+

+# _LT_TAGDECL([CONFIGNAME], VARNAME, VALUE, [DESCRIPTION])

+# --------------------------------------------------------

+m4_define([_LT_TAGDECL], [_LT_DECL([$1], [$2], [$3], [$4], [yes])])

+

+

+# lt_decl_tag_varnames([SEPARATOR], [VARNAME1...])

+# ------------------------------------------------

+m4_define([lt_decl_tag_varnames],

+[_lt_decl_filter([tagged?], [yes], $@)])

+

+

+# _lt_decl_filter(SUBKEY, VALUE, [SEPARATOR], [VARNAME1..])

+# ---------------------------------------------------------

+m4_define([_lt_decl_filter],

+[m4_case([$#],

+  [0], [m4_fatal([$0: too few arguments: $#])],

+  [1], [m4_fatal([$0: too few arguments: $#: $1])],

+  [2], [lt_dict_filter([lt_decl_dict], [$1], [$2], [], lt_decl_varnames)],

+  [3], [lt_dict_filter([lt_decl_dict], [$1], [$2], [$3], lt_decl_varnames)],

+  [lt_dict_filter([lt_decl_dict], $@)])[]dnl

+])

+

+

+# lt_decl_quote_varnames([SEPARATOR], [VARNAME1...])

+# --------------------------------------------------

+m4_define([lt_decl_quote_varnames],

+[_lt_decl_filter([value], [1], $@)])

+

+

+# lt_decl_dquote_varnames([SEPARATOR], [VARNAME1...])

+# ---------------------------------------------------

+m4_define([lt_decl_dquote_varnames],

+[_lt_decl_filter([value], [2], $@)])

+

+

+# lt_decl_varnames_tagged([SEPARATOR], [VARNAME1...])

+# ---------------------------------------------------

+m4_define([lt_decl_varnames_tagged],

+[m4_assert([$# <= 2])dnl

+_$0(m4_quote(m4_default([$1], [[, ]])),

+    m4_ifval([$2], [[$2]], [m4_dquote(lt_decl_tag_varnames)]),

+    m4_split(m4_normalize(m4_quote(_LT_TAGS)), [ ]))])

+m4_define([_lt_decl_varnames_tagged],

+[m4_ifval([$3], [lt_combine([$1], [$2], [_], $3)])])

+

+

+# lt_decl_all_varnames([SEPARATOR], [VARNAME1...])

+# ------------------------------------------------

+m4_define([lt_decl_all_varnames],

+[_$0(m4_quote(m4_default([$1], [[, ]])),

+     m4_if([$2], [],

+	   m4_quote(lt_decl_varnames),

+	m4_quote(m4_shift($@))))[]dnl

+])

+m4_define([_lt_decl_all_varnames],

+[lt_join($@, lt_decl_varnames_tagged([$1],

+			lt_decl_tag_varnames([[, ]], m4_shift($@))))dnl

+])

+

+

+# _LT_CONFIG_STATUS_DECLARE([VARNAME])

+# ------------------------------------

+# Quote a variable value, and forward it to `config.status' so that its

+# declaration there will have the same value as in `configure'.  VARNAME

+# must have a single quote delimited value for this to work.

+m4_define([_LT_CONFIG_STATUS_DECLARE],

+[$1='`$ECHO "X$][$1" | $Xsed -e "$delay_single_quote_subst"`'])

+

+

+# _LT_CONFIG_STATUS_DECLARATIONS

+# ------------------------------

+# We delimit libtool config variables with single quotes, so when

+# we write them to config.status, we have to be sure to quote all

+# embedded single quotes properly.  In configure, this macro expands

+# each variable declared with _LT_DECL (and _LT_TAGDECL) into:

+#

+#    <var>='`$ECHO "X$<var>" | $Xsed -e "$delay_single_quote_subst"`'

+m4_defun([_LT_CONFIG_STATUS_DECLARATIONS],

+[m4_foreach([_lt_var], m4_quote(lt_decl_all_varnames),

+    [m4_n([_LT_CONFIG_STATUS_DECLARE(_lt_var)])])])

+

+

+# _LT_LIBTOOL_TAGS

+# ----------------

+# Output comment and list of tags supported by the script

+m4_defun([_LT_LIBTOOL_TAGS],

+[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl

+available_tags="_LT_TAGS"dnl

+])

+

+

+# _LT_LIBTOOL_DECLARE(VARNAME, [TAG])

+# -----------------------------------

+# Extract the dictionary values for VARNAME (optionally with TAG) and

+# expand to a commented shell variable setting:

+#

+#    # Some comment about what VAR is for.

+#    visible_name=$lt_internal_name

+m4_define([_LT_LIBTOOL_DECLARE],

+[_LT_FORMAT_COMMENT(m4_quote(lt_dict_fetch([lt_decl_dict], [$1],

+					   [description])))[]dnl

+m4_pushdef([_libtool_name],

+    m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [libtool_name])))[]dnl

+m4_case(m4_quote(lt_dict_fetch([lt_decl_dict], [$1], [value])),

+    [0], [_libtool_name=[$]$1],

+    [1], [_libtool_name=$lt_[]$1],

+    [2], [_libtool_name=$lt_[]$1],

+    [_libtool_name=lt_dict_fetch([lt_decl_dict], [$1], [value])])[]dnl

+m4_ifval([$2], [_$2])[]m4_popdef([_libtool_name])[]dnl

+])

+

+

+# _LT_LIBTOOL_CONFIG_VARS

+# -----------------------

+# Produce commented declarations of non-tagged libtool config variables

+# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'

+# script.  Tagged libtool config variables (even for the LIBTOOL CONFIG

+# section) are produced by _LT_LIBTOOL_TAG_VARS.

+m4_defun([_LT_LIBTOOL_CONFIG_VARS],

+[m4_foreach([_lt_var],

+    m4_quote(_lt_decl_filter([tagged?], [no], [], lt_decl_varnames)),

+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var)])])])

+

+

+# _LT_LIBTOOL_TAG_VARS(TAG)

+# -------------------------

+m4_define([_LT_LIBTOOL_TAG_VARS],

+[m4_foreach([_lt_var], m4_quote(lt_decl_tag_varnames),

+    [m4_n([_LT_LIBTOOL_DECLARE(_lt_var, [$1])])])])

+

+

+# _LT_TAGVAR(VARNAME, [TAGNAME])

+# ------------------------------

+m4_define([_LT_TAGVAR], [m4_ifval([$2], [$1_$2], [$1])])

+

+

+# _LT_CONFIG_COMMANDS

+# -------------------

+# Send accumulated output to $CONFIG_STATUS.  Thanks to the lists of

+# variables for single and double quote escaping we saved from calls

+# to _LT_DECL, we can put quote escaped variables declarations

+# into `config.status', and then the shell code to quote escape them in

+# for loops in `config.status'.  Finally, any additional code accumulated

+# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.

+m4_defun([_LT_CONFIG_COMMANDS],

+[AC_PROVIDE_IFELSE([LT_OUTPUT],

+	dnl If the libtool generation code has been placed in $CONFIG_LT,

+	dnl instead of duplicating it all over again into config.status,

+	dnl then we will have config.status run $CONFIG_LT later, so it

+	dnl needs to know what name is stored there:

+        [AC_CONFIG_COMMANDS([libtool],

+            [$SHELL $CONFIG_LT || AS_EXIT(1)], [CONFIG_LT='$CONFIG_LT'])],

+    dnl If the libtool generation code is destined for config.status,

+    dnl expand the accumulated commands and init code now:

+    [AC_CONFIG_COMMANDS([libtool],

+        [_LT_OUTPUT_LIBTOOL_COMMANDS], [_LT_OUTPUT_LIBTOOL_COMMANDS_INIT])])

+])#_LT_CONFIG_COMMANDS

+

+

+# Initialize.

+m4_define([_LT_OUTPUT_LIBTOOL_COMMANDS_INIT],

+[

+

+# The HP-UX ksh and POSIX shell print the target directory to stdout

+# if CDPATH is set.

+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH

+

+sed_quote_subst='$sed_quote_subst'

+double_quote_subst='$double_quote_subst'

+delay_variable_subst='$delay_variable_subst'

+_LT_CONFIG_STATUS_DECLARATIONS

+LTCC='$LTCC'

+LTCFLAGS='$LTCFLAGS'

+compiler='$compiler_DEFAULT'

+

+# Quote evaled strings.

+for var in lt_decl_all_varnames([[ \

+]], lt_decl_quote_varnames); do

+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in

+    *[[\\\\\\\`\\"\\\$]]*)

+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\""

+      ;;

+    *)

+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""

+      ;;

+    esac

+done

+

+# Double-quote double-evaled strings.

+for var in lt_decl_all_varnames([[ \

+]], lt_decl_dquote_varnames); do

+    case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in

+    *[[\\\\\\\`\\"\\\$]]*)

+      eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""

+      ;;

+    *)

+      eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""

+      ;;

+    esac

+done

+

+# Fix-up fallback echo if it was mangled by the above quoting rules.

+case \$lt_ECHO in

+*'\\\[$]0 --fallback-echo"')dnl "

+  lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\[$]0 --fallback-echo"\[$]/\[$]0 --fallback-echo"/'\`

+  ;;

+esac

+

+_LT_OUTPUT_LIBTOOL_INIT

+])

+

+

+# LT_OUTPUT

+# ---------

+# This macro allows early generation of the libtool script (before

+# AC_OUTPUT is called), incase it is used in configure for compilation

+# tests.

+AC_DEFUN([LT_OUTPUT],

+[: ${CONFIG_LT=./config.lt}

+AC_MSG_NOTICE([creating $CONFIG_LT])

+cat >"$CONFIG_LT" <<_LTEOF

+#! $SHELL

+# Generated by $as_me.

+# Run this file to recreate a libtool stub with the current configuration.

+

+lt_cl_silent=false

+SHELL=\${CONFIG_SHELL-$SHELL}

+_LTEOF

+

+cat >>"$CONFIG_LT" <<\_LTEOF

+AS_SHELL_SANITIZE

+_AS_PREPARE

+

+exec AS_MESSAGE_FD>&1

+exec AS_MESSAGE_LOG_FD>>config.log

+{

+  echo

+  AS_BOX([Running $as_me.])

+} >&AS_MESSAGE_LOG_FD

+

+lt_cl_help="\

+\`$as_me' creates a local libtool stub from the current configuration,

+for use in further configure time tests before the real libtool is

+generated.

+

+Usage: $[0] [[OPTIONS]]

+

+  -h, --help      print this help, then exit

+  -V, --version   print version number, then exit

+  -q, --quiet     do not print progress messages

+  -d, --debug     don't remove temporary files

+

+Report bugs to <bug-libtool@gnu.org>."

+

+lt_cl_version="\

+m4_ifset([AC_PACKAGE_NAME], [AC_PACKAGE_NAME ])config.lt[]dnl

+m4_ifset([AC_PACKAGE_VERSION], [ AC_PACKAGE_VERSION])

+configured by $[0], generated by m4_PACKAGE_STRING.

+

+Copyright (C) 2008 Free Software Foundation, Inc.

+This config.lt script is free software; the Free Software Foundation

+gives unlimited permision to copy, distribute and modify it."

+

+while test $[#] != 0

+do

+  case $[1] in

+    --version | --v* | -V )

+      echo "$lt_cl_version"; exit 0 ;;

+    --help | --h* | -h )

+      echo "$lt_cl_help"; exit 0 ;;

+    --debug | --d* | -d )

+      debug=: ;;

+    --quiet | --q* | --silent | --s* | -q )

+      lt_cl_silent=: ;;

+

+    -*) AC_MSG_ERROR([unrecognized option: $[1]

+Try \`$[0] --help' for more information.]) ;;

+

+    *) AC_MSG_ERROR([unrecognized argument: $[1]

+Try \`$[0] --help' for more information.]) ;;

+  esac

+  shift

+done

+

+if $lt_cl_silent; then

+  exec AS_MESSAGE_FD>/dev/null

+fi

+_LTEOF

+

+cat >>"$CONFIG_LT" <<_LTEOF

+_LT_OUTPUT_LIBTOOL_COMMANDS_INIT

+_LTEOF

+

+cat >>"$CONFIG_LT" <<\_LTEOF

+AC_MSG_NOTICE([creating $ofile])

+_LT_OUTPUT_LIBTOOL_COMMANDS

+AS_EXIT(0)

+_LTEOF

+chmod +x "$CONFIG_LT"

+

+# configure is writing to config.log, but config.lt does its own redirection,

+# appending to config.log, which fails on DOS, as config.log is still kept

+# open by configure.  Here we exec the FD to /dev/null, effectively closing

+# config.log, so it can be properly (re)opened and appended to by config.lt.

+if test "$no_create" != yes; then

+  lt_cl_success=:

+  test "$silent" = yes &&

+    lt_config_lt_args="$lt_config_lt_args --quiet"

+  exec AS_MESSAGE_LOG_FD>/dev/null

+  $SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false

+  exec AS_MESSAGE_LOG_FD>>config.log

+  $lt_cl_success || AS_EXIT(1)

+fi

+])# LT_OUTPUT

+

+

+# _LT_CONFIG(TAG)

+# ---------------

+# If TAG is the built-in tag, create an initial libtool script with a

+# default configuration from the untagged config vars.  Otherwise add code

+# to config.status for appending the configuration named by TAG from the

+# matching tagged config vars.

+m4_defun([_LT_CONFIG],

+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl

+_LT_CONFIG_SAVE_COMMANDS([

+  m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl

+  m4_if(_LT_TAG, [C], [

+    # See if we are running on zsh, and set the options which allow our

+    # commands through without removal of \ escapes.

+    if test -n "${ZSH_VERSION+set}" ; then

+      setopt NO_GLOB_SUBST

+    fi

+

+    cfgfile="${ofile}T"

+    trap "$RM \"$cfgfile\"; exit 1" 1 2 15

+    $RM "$cfgfile"

+

+    cat <<_LT_EOF >> "$cfgfile"

+#! $SHELL

+

+# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.

+# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION

+# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:

+# NOTE: Changes made to this file will be lost: look at ltmain.sh.

+#

+_LT_COPYING

+_LT_LIBTOOL_TAGS

+

+# ### BEGIN LIBTOOL CONFIG

+_LT_LIBTOOL_CONFIG_VARS

+_LT_LIBTOOL_TAG_VARS

+# ### END LIBTOOL CONFIG

+

+_LT_EOF

+

+  case $host_os in

+  aix3*)

+    cat <<\_LT_EOF >> "$cfgfile"

+# AIX sometimes has problems with the GCC collect2 program.  For some

+# reason, if we set the COLLECT_NAMES environment variable, the problems

+# vanish in a puff of smoke.

+if test "X${COLLECT_NAMES+set}" != Xset; then

+  COLLECT_NAMES=

+  export COLLECT_NAMES

+fi

+_LT_EOF

+    ;;

+  esac

+

+  _LT_PROG_LTMAIN

+

+  # We use sed instead of cat because bash on DJGPP gets confused if

+  # if finds mixed CR/LF and LF-only lines.  Since sed operates in

+  # text mode, it properly converts lines to CR/LF.  This bash problem

+  # is reportedly fixed, but why not run on old versions too?

+  sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \

+    || (rm -f "$cfgfile"; exit 1)

+

+  _LT_PROG_XSI_SHELLFNS

+

+  sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \

+    || (rm -f "$cfgfile"; exit 1)

+

+  mv -f "$cfgfile" "$ofile" ||

+    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")

+  chmod +x "$ofile"

+],

+[cat <<_LT_EOF >> "$ofile"

+

+dnl Unfortunately we have to use $1 here, since _LT_TAG is not expanded

+dnl in a comment (ie after a #).

+# ### BEGIN LIBTOOL TAG CONFIG: $1

+_LT_LIBTOOL_TAG_VARS(_LT_TAG)

+# ### END LIBTOOL TAG CONFIG: $1

+_LT_EOF

+])dnl /m4_if

+],

+[m4_if([$1], [], [

+    PACKAGE='$PACKAGE'

+    VERSION='$VERSION'

+    TIMESTAMP='$TIMESTAMP'

+    RM='$RM'

+    ofile='$ofile'], [])

+])dnl /_LT_CONFIG_SAVE_COMMANDS

+])# _LT_CONFIG

+

+

+# LT_SUPPORTED_TAG(TAG)

+# ---------------------

+# Trace this macro to discover what tags are supported by the libtool

+# --tag option, using:

+#    autoconf --trace 'LT_SUPPORTED_TAG:$1'

+AC_DEFUN([LT_SUPPORTED_TAG], [])

+

+

+# C support is built-in for now

+m4_define([_LT_LANG_C_enabled], [])

+m4_define([_LT_TAGS], [])

+

+

+# LT_LANG(LANG)

+# -------------

+# Enable libtool support for the given language if not already enabled.

+AC_DEFUN([LT_LANG],

+[AC_BEFORE([$0], [LT_OUTPUT])dnl

+m4_case([$1],

+  [C],			[_LT_LANG(C)],

+  [C++],		[_LT_LANG(CXX)],

+  [Java],		[_LT_LANG(GCJ)],

+  [Fortran 77],		[_LT_LANG(F77)],

+  [Fortran],		[_LT_LANG(FC)],

+  [Windows Resource],	[_LT_LANG(RC)],

+  [m4_ifdef([_LT_LANG_]$1[_CONFIG],

+    [_LT_LANG($1)],

+    [m4_fatal([$0: unsupported language: "$1"])])])dnl

+])# LT_LANG

+

+

+# _LT_LANG(LANGNAME)

+# ------------------

+m4_defun([_LT_LANG],

+[m4_ifdef([_LT_LANG_]$1[_enabled], [],

+  [LT_SUPPORTED_TAG([$1])dnl

+  m4_append([_LT_TAGS], [$1 ])dnl

+  m4_define([_LT_LANG_]$1[_enabled], [])dnl

+  _LT_LANG_$1_CONFIG($1)])dnl

+])# _LT_LANG

+

+

+# _LT_LANG_DEFAULT_CONFIG

+# -----------------------

+m4_defun([_LT_LANG_DEFAULT_CONFIG],

+[AC_PROVIDE_IFELSE([AC_PROG_CXX],

+  [LT_LANG(CXX)],

+  [m4_define([AC_PROG_CXX], defn([AC_PROG_CXX])[LT_LANG(CXX)])])

+

+AC_PROVIDE_IFELSE([AC_PROG_F77],

+  [LT_LANG(F77)],

+  [m4_define([AC_PROG_F77], defn([AC_PROG_F77])[LT_LANG(F77)])])

+

+AC_PROVIDE_IFELSE([AC_PROG_FC],

+  [LT_LANG(FC)],

+  [m4_define([AC_PROG_FC], defn([AC_PROG_FC])[LT_LANG(FC)])])

+

+dnl The call to [A][M_PROG_GCJ] is quoted like that to stop aclocal

+dnl pulling things in needlessly.

+AC_PROVIDE_IFELSE([AC_PROG_GCJ],

+  [LT_LANG(GCJ)],

+  [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],

+    [LT_LANG(GCJ)],

+    [AC_PROVIDE_IFELSE([LT_PROG_GCJ],

+      [LT_LANG(GCJ)],

+      [m4_ifdef([AC_PROG_GCJ],

+	[m4_define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[LT_LANG(GCJ)])])

+       m4_ifdef([A][M_PROG_GCJ],

+	[m4_define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[LT_LANG(GCJ)])])

+       m4_ifdef([LT_PROG_GCJ],

+	[m4_define([LT_PROG_GCJ], defn([LT_PROG_GCJ])[LT_LANG(GCJ)])])])])])

+

+AC_PROVIDE_IFELSE([LT_PROG_RC],

+  [LT_LANG(RC)],

+  [m4_define([LT_PROG_RC], defn([LT_PROG_RC])[LT_LANG(RC)])])

+])# _LT_LANG_DEFAULT_CONFIG

+

+# Obsolete macros:

+AU_DEFUN([AC_LIBTOOL_CXX], [LT_LANG(C++)])

+AU_DEFUN([AC_LIBTOOL_F77], [LT_LANG(Fortran 77)])

+AU_DEFUN([AC_LIBTOOL_FC], [LT_LANG(Fortran)])

+AU_DEFUN([AC_LIBTOOL_GCJ], [LT_LANG(Java)])

+dnl aclocal-1.4 backwards compatibility:

+dnl AC_DEFUN([AC_LIBTOOL_CXX], [])

+dnl AC_DEFUN([AC_LIBTOOL_F77], [])

+dnl AC_DEFUN([AC_LIBTOOL_FC], [])

+dnl AC_DEFUN([AC_LIBTOOL_GCJ], [])

+

+

+# _LT_TAG_COMPILER

+# ----------------

+m4_defun([_LT_TAG_COMPILER],

+[AC_REQUIRE([AC_PROG_CC])dnl

+

+_LT_DECL([LTCC], [CC], [1], [A C compiler])dnl

+_LT_DECL([LTCFLAGS], [CFLAGS], [1], [LTCC compiler flags])dnl

+_LT_TAGDECL([CC], [compiler], [1], [A language specific compiler])dnl

+_LT_TAGDECL([with_gcc], [GCC], [0], [Is the compiler the GNU compiler?])dnl

+

+# If no C compiler was specified, use CC.

+LTCC=${LTCC-"$CC"}

+

+# If no C compiler flags were specified, use CFLAGS.

+LTCFLAGS=${LTCFLAGS-"$CFLAGS"}

+

+# Allow CC to be a program name with arguments.

+compiler=$CC

+])# _LT_TAG_COMPILER

+

+

+# _LT_COMPILER_BOILERPLATE

+# ------------------------

+# Check for compiler boilerplate output or warnings with

+# the simple compiler test code.

+m4_defun([_LT_COMPILER_BOILERPLATE],

+[m4_require([_LT_DECL_SED])dnl

+ac_outfile=conftest.$ac_objext

+echo "$lt_simple_compile_test_code" >conftest.$ac_ext

+eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err

+_lt_compiler_boilerplate=`cat conftest.err`

+$RM conftest*

+])# _LT_COMPILER_BOILERPLATE

+

+

+# _LT_LINKER_BOILERPLATE

+# ----------------------

+# Check for linker boilerplate output or warnings with

+# the simple link test code.

+m4_defun([_LT_LINKER_BOILERPLATE],

+[m4_require([_LT_DECL_SED])dnl

+ac_outfile=conftest.$ac_objext

+echo "$lt_simple_link_test_code" >conftest.$ac_ext

+eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err

+_lt_linker_boilerplate=`cat conftest.err`

+$RM -r conftest*

+])# _LT_LINKER_BOILERPLATE

+

+# _LT_REQUIRED_DARWIN_CHECKS

+# -------------------------

+m4_defun_once([_LT_REQUIRED_DARWIN_CHECKS],[

+  case $host_os in

+    rhapsody* | darwin*)

+    AC_CHECK_TOOL([DSYMUTIL], [dsymutil], [:])

+    AC_CHECK_TOOL([NMEDIT], [nmedit], [:])

+    AC_CHECK_TOOL([LIPO], [lipo], [:])

+    AC_CHECK_TOOL([OTOOL], [otool], [:])

+    AC_CHECK_TOOL([OTOOL64], [otool64], [:])

+    _LT_DECL([], [DSYMUTIL], [1],

+      [Tool to manipulate archived DWARF debug symbol files on Mac OS X])

+    _LT_DECL([], [NMEDIT], [1],

+      [Tool to change global to local symbols on Mac OS X])

+    _LT_DECL([], [LIPO], [1],

+      [Tool to manipulate fat objects and archives on Mac OS X])

+    _LT_DECL([], [OTOOL], [1],

+      [ldd/readelf like tool for Mach-O binaries on Mac OS X])

+    _LT_DECL([], [OTOOL64], [1],

+      [ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4])

+

+    AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],

+      [lt_cv_apple_cc_single_mod=no

+      if test -z "${LT_MULTI_MODULE}"; then

+	# By default we will add the -single_module flag. You can override

+	# by either setting the environment variable LT_MULTI_MODULE

+	# non-empty at configure time, or by adding -multi_module to the

+	# link flags.

+	rm -rf libconftest.dylib*

+	echo "int foo(void){return 1;}" > conftest.c

+	echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \

+-dynamiclib -Wl,-single_module conftest.c" >&AS_MESSAGE_LOG_FD

+	$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \

+	  -dynamiclib -Wl,-single_module conftest.c 2>conftest.err

+        _lt_result=$?

+	if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then

+	  lt_cv_apple_cc_single_mod=yes

+	else

+	  cat conftest.err >&AS_MESSAGE_LOG_FD

+	fi

+	rm -rf libconftest.dylib*

+	rm -f conftest.*

+      fi])

+    AC_CACHE_CHECK([for -exported_symbols_list linker flag],

+      [lt_cv_ld_exported_symbols_list],

+      [lt_cv_ld_exported_symbols_list=no

+      save_LDFLAGS=$LDFLAGS

+      echo "_main" > conftest.sym

+      LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym"

+      AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],

+	[lt_cv_ld_exported_symbols_list=yes],

+	[lt_cv_ld_exported_symbols_list=no])

+	LDFLAGS="$save_LDFLAGS"

+    ])

+    case $host_os in

+    rhapsody* | darwin1.[[012]])

+      _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;

+    darwin1.*)

+      _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;

+    darwin*) # darwin 5.x on

+      # if running on 10.5 or later, the deployment target defaults

+      # to the OS version, if on x86, and 10.4, the deployment

+      # target defaults to 10.4. Don't you love it?

+      case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in

+	10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)

+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;

+	10.[[012]]*)

+	  _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;

+	10.*)

+	  _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;

+      esac

+    ;;

+  esac

+    if test "$lt_cv_apple_cc_single_mod" = "yes"; then

+      _lt_dar_single_mod='$single_module'

+    fi

+    if test "$lt_cv_ld_exported_symbols_list" = "yes"; then

+      _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'

+    else

+      _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'

+    fi

+    if test "$DSYMUTIL" != ":"; then

+      _lt_dsymutil='~$DSYMUTIL $lib || :'

+    else

+      _lt_dsymutil=

+    fi

+    ;;

+  esac

+])

+

+

+# _LT_DARWIN_LINKER_FEATURES

+# --------------------------

+# Checks for linker and compiler features on darwin

+m4_defun([_LT_DARWIN_LINKER_FEATURES],

+[

+  m4_require([_LT_REQUIRED_DARWIN_CHECKS])

+  _LT_TAGVAR(archive_cmds_need_lc, $1)=no

+  _LT_TAGVAR(hardcode_direct, $1)=no

+  _LT_TAGVAR(hardcode_automatic, $1)=yes

+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported

+  _LT_TAGVAR(whole_archive_flag_spec, $1)=''

+  _LT_TAGVAR(link_all_deplibs, $1)=yes

+  _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"

+  case $cc_basename in

+     ifort*) _lt_dar_can_shared=yes ;;

+     *) _lt_dar_can_shared=$GCC ;;

+  esac

+  if test "$_lt_dar_can_shared" = "yes"; then

+    output_verbose_link_cmd=echo

+    _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"

+    _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"

+    _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"

+    _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"

+    m4_if([$1], [CXX],

+[   if test "$lt_cv_apple_cc_single_mod" != "yes"; then

+      _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"

+      _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"

+    fi

+],[])

+  else

+  _LT_TAGVAR(ld_shlibs, $1)=no

+  fi

+])

+

+# _LT_SYS_MODULE_PATH_AIX

+# -----------------------

+# Links a minimal program and checks the executable

+# for the system default hardcoded library path. In most cases,

+# this is /usr/lib:/lib, but when the MPI compilers are used

+# the location of the communication and MPI libs are included too.

+# If we don't find anything, use the default library path according

+# to the aix ld manual.

+m4_defun([_LT_SYS_MODULE_PATH_AIX],

+[m4_require([_LT_DECL_SED])dnl

+AC_LINK_IFELSE(AC_LANG_PROGRAM,[

+lt_aix_libpath_sed='

+    /Import File Strings/,/^$/ {

+	/^0/ {

+	    s/^0  *\(.*\)$/\1/

+	    p

+	}

+    }'

+aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`

+# Check for a 64-bit object if we didn't find anything.

+if test -z "$aix_libpath"; then

+  aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`

+fi],[])

+if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi

+])# _LT_SYS_MODULE_PATH_AIX

+

+

+# _LT_SHELL_INIT(ARG)

+# -------------------

+m4_define([_LT_SHELL_INIT],

+[ifdef([AC_DIVERSION_NOTICE],

+	     [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)],

+	 [AC_DIVERT_PUSH(NOTICE)])

+$1

+AC_DIVERT_POP

+])# _LT_SHELL_INIT

+

+

+# _LT_PROG_ECHO_BACKSLASH

+# -----------------------

+# Add some code to the start of the generated configure script which

+# will find an echo command which doesn't interpret backslashes.

+m4_defun([_LT_PROG_ECHO_BACKSLASH],

+[_LT_SHELL_INIT([

+# Check that we are running under the correct shell.

+SHELL=${CONFIG_SHELL-/bin/sh}

+

+case X$lt_ECHO in

+X*--fallback-echo)

+  # Remove one level of quotation (which was required for Make).

+  ECHO=`echo "$lt_ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','`

+  ;;

+esac

+

+ECHO=${lt_ECHO-echo}

+if test "X[$]1" = X--no-reexec; then

+  # Discard the --no-reexec flag, and continue.

+  shift

+elif test "X[$]1" = X--fallback-echo; then

+  # Avoid inline document here, it may be left over

+  :

+elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then

+  # Yippee, $ECHO works!

+  :

+else

+  # Restart under the correct shell.

+  exec $SHELL "[$]0" --no-reexec ${1+"[$]@"}

+fi

+

+if test "X[$]1" = X--fallback-echo; then

+  # used as fallback echo

+  shift

+  cat <<_LT_EOF

+[$]*

+_LT_EOF

+  exit 0

+fi

+

+# The HP-UX ksh and POSIX shell print the target directory to stdout

+# if CDPATH is set.

+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH

+

+if test -z "$lt_ECHO"; then

+  if test "X${echo_test_string+set}" != Xset; then

+    # find a string as large as possible, as long as the shell can cope with it

+    for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do

+      # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...

+      if { echo_test_string=`eval $cmd`; } 2>/dev/null &&

+	 { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null

+      then

+        break

+      fi

+    done

+  fi

+

+  if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&

+     echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&

+     test "X$echo_testing_string" = "X$echo_test_string"; then

+    :

+  else

+    # The Solaris, AIX, and Digital Unix default echo programs unquote

+    # backslashes.  This makes it impossible to quote backslashes using

+    #   echo "$something" | sed 's/\\/\\\\/g'

+    #

+    # So, first we look for a working echo in the user's PATH.

+

+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR

+    for dir in $PATH /usr/ucb; do

+      IFS="$lt_save_ifs"

+      if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&

+         test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&

+         echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&

+         test "X$echo_testing_string" = "X$echo_test_string"; then

+        ECHO="$dir/echo"

+        break

+      fi

+    done

+    IFS="$lt_save_ifs"

+

+    if test "X$ECHO" = Xecho; then

+      # We didn't find a better echo, so look for alternatives.

+      if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' &&

+         echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` &&

+         test "X$echo_testing_string" = "X$echo_test_string"; then

+        # This shell has a builtin print -r that does the trick.

+        ECHO='print -r'

+      elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } &&

+	   test "X$CONFIG_SHELL" != X/bin/ksh; then

+        # If we have ksh, try running configure again with it.

+        ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}

+        export ORIGINAL_CONFIG_SHELL

+        CONFIG_SHELL=/bin/ksh

+        export CONFIG_SHELL

+        exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"}

+      else

+        # Try using printf.

+        ECHO='printf %s\n'

+        if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' &&

+	   echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` &&

+	   test "X$echo_testing_string" = "X$echo_test_string"; then

+	  # Cool, printf works

+	  :

+        elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&

+	     test "X$echo_testing_string" = 'X\t' &&

+	     echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&

+	     test "X$echo_testing_string" = "X$echo_test_string"; then

+	  CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL

+	  export CONFIG_SHELL

+	  SHELL="$CONFIG_SHELL"

+	  export SHELL

+	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"

+        elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` &&

+	     test "X$echo_testing_string" = 'X\t' &&

+	     echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` &&

+	     test "X$echo_testing_string" = "X$echo_test_string"; then

+	  ECHO="$CONFIG_SHELL [$]0 --fallback-echo"

+        else

+	  # maybe with a smaller string...

+	  prev=:

+

+	  for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do

+	    if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null

+	    then

+	      break

+	    fi

+	    prev="$cmd"

+	  done

+

+	  if test "$prev" != 'sed 50q "[$]0"'; then

+	    echo_test_string=`eval $prev`

+	    export echo_test_string

+	    exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"}

+	  else

+	    # Oops.  We lost completely, so just stick with echo.

+	    ECHO=echo

+	  fi

+        fi

+      fi

+    fi

+  fi

+fi

+

+# Copy echo and quote the copy suitably for passing to libtool from

+# the Makefile, instead of quoting the original, which is used later.

+lt_ECHO=$ECHO

+if test "X$lt_ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then

+   lt_ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo"

+fi

+

+AC_SUBST(lt_ECHO)

+])

+_LT_DECL([], [SHELL], [1], [Shell to use when invoking shell scripts])

+_LT_DECL([], [ECHO], [1],

+    [An echo program that does not interpret backslashes])

+])# _LT_PROG_ECHO_BACKSLASH

+

+

+# _LT_ENABLE_LOCK

+# ---------------

+m4_defun([_LT_ENABLE_LOCK],

+[AC_ARG_ENABLE([libtool-lock],

+  [AS_HELP_STRING([--disable-libtool-lock],

+    [avoid locking (might break parallel builds)])])

+test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes

+

+# Some flags need to be propagated to the compiler or linker for good

+# libtool support.

+case $host in

+ia64-*-hpux*)

+  # Find out which ABI we are using.

+  echo 'int i;' > conftest.$ac_ext

+  if AC_TRY_EVAL(ac_compile); then

+    case `/usr/bin/file conftest.$ac_objext` in

+      *ELF-32*)

+	HPUX_IA64_MODE="32"

+	;;

+      *ELF-64*)

+	HPUX_IA64_MODE="64"

+	;;

+    esac

+  fi

+  rm -rf conftest*

+  ;;

+*-*-irix6*)

+  # Find out which ABI we are using.

+  echo '[#]line __oline__ "configure"' > conftest.$ac_ext

+  if AC_TRY_EVAL(ac_compile); then

+    if test "$lt_cv_prog_gnu_ld" = yes; then

+      case `/usr/bin/file conftest.$ac_objext` in

+	*32-bit*)

+	  LD="${LD-ld} -melf32bsmip"

+	  ;;

+	*N32*)

+	  LD="${LD-ld} -melf32bmipn32"

+	  ;;

+	*64-bit*)

+	  LD="${LD-ld} -melf64bmip"

+	;;

+      esac

+    else

+      case `/usr/bin/file conftest.$ac_objext` in

+	*32-bit*)

+	  LD="${LD-ld} -32"

+	  ;;

+	*N32*)

+	  LD="${LD-ld} -n32"

+	  ;;

+	*64-bit*)

+	  LD="${LD-ld} -64"

+	  ;;

+      esac

+    fi

+  fi

+  rm -rf conftest*

+  ;;

+

+x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \

+s390*-*linux*|s390*-*tpf*|sparc*-*linux*)

+  # Find out which ABI we are using.

+  echo 'int i;' > conftest.$ac_ext

+  if AC_TRY_EVAL(ac_compile); then

+    case `/usr/bin/file conftest.o` in

+      *32-bit*)

+	case $host in

+	  x86_64-*kfreebsd*-gnu)

+	    LD="${LD-ld} -m elf_i386_fbsd"

+	    ;;

+	  x86_64-*linux*)

+	    LD="${LD-ld} -m elf_i386"

+	    ;;

+	  ppc64-*linux*|powerpc64-*linux*)

+	    LD="${LD-ld} -m elf32ppclinux"

+	    ;;

+	  s390x-*linux*)

+	    LD="${LD-ld} -m elf_s390"

+	    ;;

+	  sparc64-*linux*)

+	    LD="${LD-ld} -m elf32_sparc"

+	    ;;

+	esac

+	;;

+      *64-bit*)

+	case $host in

+	  x86_64-*kfreebsd*-gnu)

+	    LD="${LD-ld} -m elf_x86_64_fbsd"

+	    ;;

+	  x86_64-*linux*)

+	    LD="${LD-ld} -m elf_x86_64"

+	    ;;

+	  ppc*-*linux*|powerpc*-*linux*)

+	    LD="${LD-ld} -m elf64ppc"

+	    ;;

+	  s390*-*linux*|s390*-*tpf*)

+	    LD="${LD-ld} -m elf64_s390"

+	    ;;

+	  sparc*-*linux*)

+	    LD="${LD-ld} -m elf64_sparc"

+	    ;;

+	esac

+	;;

+    esac

+  fi

+  rm -rf conftest*

+  ;;

+

+*-*-sco3.2v5*)

+  # On SCO OpenServer 5, we need -belf to get full-featured binaries.

+  SAVE_CFLAGS="$CFLAGS"

+  CFLAGS="$CFLAGS -belf"

+  AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,

+    [AC_LANG_PUSH(C)

+     AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])

+     AC_LANG_POP])

+  if test x"$lt_cv_cc_needs_belf" != x"yes"; then

+    # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf

+    CFLAGS="$SAVE_CFLAGS"

+  fi

+  ;;

+sparc*-*solaris*)

+  # Find out which ABI we are using.

+  echo 'int i;' > conftest.$ac_ext

+  if AC_TRY_EVAL(ac_compile); then

+    case `/usr/bin/file conftest.o` in

+    *64-bit*)

+      case $lt_cv_prog_gnu_ld in

+      yes*) LD="${LD-ld} -m elf64_sparc" ;;

+      *)

+	if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then

+	  LD="${LD-ld} -64"

+	fi

+	;;

+      esac

+      ;;

+    esac

+  fi

+  rm -rf conftest*

+  ;;

+esac

+

+need_locks="$enable_libtool_lock"

+])# _LT_ENABLE_LOCK

+

+

+# _LT_CMD_OLD_ARCHIVE

+# -------------------

+m4_defun([_LT_CMD_OLD_ARCHIVE],

+[AC_CHECK_TOOL(AR, ar, false)

+test -z "$AR" && AR=ar

+test -z "$AR_FLAGS" && AR_FLAGS=cru

+_LT_DECL([], [AR], [1], [The archiver])

+_LT_DECL([], [AR_FLAGS], [1])

+

+AC_CHECK_TOOL(STRIP, strip, :)

+test -z "$STRIP" && STRIP=:

+_LT_DECL([], [STRIP], [1], [A symbol stripping program])

+

+AC_CHECK_TOOL(RANLIB, ranlib, :)

+test -z "$RANLIB" && RANLIB=:

+_LT_DECL([], [RANLIB], [1],

+    [Commands used to install an old-style archive])

+

+# Determine commands to create old-style static archives.

+old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs'

+old_postinstall_cmds='chmod 644 $oldlib'

+old_postuninstall_cmds=

+

+if test -n "$RANLIB"; then

+  case $host_os in

+  openbsd*)

+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib"

+    ;;

+  *)

+    old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib"

+    ;;

+  esac

+  old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"

+fi

+_LT_DECL([], [old_postinstall_cmds], [2])

+_LT_DECL([], [old_postuninstall_cmds], [2])

+_LT_TAGDECL([], [old_archive_cmds], [2],

+    [Commands used to build an old-style archive])

+])# _LT_CMD_OLD_ARCHIVE

+

+

+# _LT_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,

+#		[OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE])

+# ----------------------------------------------------------------

+# Check whether the given compiler option works

+AC_DEFUN([_LT_COMPILER_OPTION],

+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl

+m4_require([_LT_DECL_SED])dnl

+AC_CACHE_CHECK([$1], [$2],

+  [$2=no

+   m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])

+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext

+   lt_compiler_flag="$3"

+   # Insert the option either (1) after the last *FLAGS variable, or

+   # (2) before a word containing "conftest.", or (3) at the end.

+   # Note that $ac_compile itself does not contain backslashes and begins

+   # with a dollar sign (not a hyphen), so the echo should work correctly.

+   # The option is referenced via a variable to avoid confusing sed.

+   lt_compile=`echo "$ac_compile" | $SED \

+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \

+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \

+   -e 's:$: $lt_compiler_flag:'`

+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)

+   (eval "$lt_compile" 2>conftest.err)

+   ac_status=$?

+   cat conftest.err >&AS_MESSAGE_LOG_FD

+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD

+   if (exit $ac_status) && test -s "$ac_outfile"; then

+     # The compiler can only warn and ignore the option if not recognized

+     # So say no if there are warnings other than the usual output.

+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp

+     $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2

+     if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then

+       $2=yes

+     fi

+   fi

+   $RM conftest*

+])

+

+if test x"[$]$2" = xyes; then

+    m4_if([$5], , :, [$5])

+else

+    m4_if([$6], , :, [$6])

+fi

+])# _LT_COMPILER_OPTION

+

+# Old name:

+AU_ALIAS([AC_LIBTOOL_COMPILER_OPTION], [_LT_COMPILER_OPTION])

+dnl aclocal-1.4 backwards compatibility:

+dnl AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [])

+

+

+# _LT_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS,

+#                  [ACTION-SUCCESS], [ACTION-FAILURE])

+# ----------------------------------------------------

+# Check whether the given linker option works

+AC_DEFUN([_LT_LINKER_OPTION],

+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl

+m4_require([_LT_DECL_SED])dnl

+AC_CACHE_CHECK([$1], [$2],

+  [$2=no

+   save_LDFLAGS="$LDFLAGS"

+   LDFLAGS="$LDFLAGS $3"

+   echo "$lt_simple_link_test_code" > conftest.$ac_ext

+   if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then

+     # The linker can only warn and ignore the option if not recognized

+     # So say no if there are warnings

+     if test -s conftest.err; then

+       # Append any errors to the config.log.

+       cat conftest.err 1>&AS_MESSAGE_LOG_FD

+       $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp

+       $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2

+       if diff conftest.exp conftest.er2 >/dev/null; then

+         $2=yes

+       fi

+     else

+       $2=yes

+     fi

+   fi

+   $RM -r conftest*

+   LDFLAGS="$save_LDFLAGS"

+])

+

+if test x"[$]$2" = xyes; then

+    m4_if([$4], , :, [$4])

+else

+    m4_if([$5], , :, [$5])

+fi

+])# _LT_LINKER_OPTION

+

+# Old name:

+AU_ALIAS([AC_LIBTOOL_LINKER_OPTION], [_LT_LINKER_OPTION])

+dnl aclocal-1.4 backwards compatibility:

+dnl AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [])

+

+

+# LT_CMD_MAX_LEN

+#---------------

+AC_DEFUN([LT_CMD_MAX_LEN],

+[AC_REQUIRE([AC_CANONICAL_HOST])dnl

+# find the maximum length of command line arguments

+AC_MSG_CHECKING([the maximum length of command line arguments])

+AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl

+  i=0

+  teststring="ABCD"

+

+  case $build_os in

+  msdosdjgpp*)

+    # On DJGPP, this test can blow up pretty badly due to problems in libc

+    # (any single argument exceeding 2000 bytes causes a buffer overrun

+    # during glob expansion).  Even if it were fixed, the result of this

+    # check would be larger than it should be.

+    lt_cv_sys_max_cmd_len=12288;    # 12K is about right

+    ;;

+

+  gnu*)

+    # Under GNU Hurd, this test is not required because there is

+    # no limit to the length of command line arguments.

+    # Libtool will interpret -1 as no limit whatsoever

+    lt_cv_sys_max_cmd_len=-1;

+    ;;

+

+  cygwin* | mingw* | cegcc*)

+    # On Win9x/ME, this test blows up -- it succeeds, but takes

+    # about 5 minutes as the teststring grows exponentially.

+    # Worse, since 9x/ME are not pre-emptively multitasking,

+    # you end up with a "frozen" computer, even though with patience

+    # the test eventually succeeds (with a max line length of 256k).

+    # Instead, let's just punt: use the minimum linelength reported by

+    # all of the supported platforms: 8192 (on NT/2K/XP).

+    lt_cv_sys_max_cmd_len=8192;

+    ;;

+

+  amigaos*)

+    # On AmigaOS with pdksh, this test takes hours, literally.

+    # So we just punt and use a minimum line length of 8192.

+    lt_cv_sys_max_cmd_len=8192;

+    ;;

+

+  netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)

+    # This has been around since 386BSD, at least.  Likely further.

+    if test -x /sbin/sysctl; then

+      lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`

+    elif test -x /usr/sbin/sysctl; then

+      lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax`

+    else

+      lt_cv_sys_max_cmd_len=65536	# usable default for all BSDs

+    fi

+    # And add a safety zone

+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`

+    lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`

+    ;;

+

+  interix*)

+    # We know the value 262144 and hardcode it with a safety zone (like BSD)

+    lt_cv_sys_max_cmd_len=196608

+    ;;

+

+  osf*)

+    # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure

+    # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not

+    # nice to cause kernel panics so lets avoid the loop below.

+    # First set a reasonable default.

+    lt_cv_sys_max_cmd_len=16384

+    #

+    if test -x /sbin/sysconfig; then

+      case `/sbin/sysconfig -q proc exec_disable_arg_limit` in

+        *1*) lt_cv_sys_max_cmd_len=-1 ;;

+      esac

+    fi

+    ;;

+  sco3.2v5*)

+    lt_cv_sys_max_cmd_len=102400

+    ;;

+  sysv5* | sco5v6* | sysv4.2uw2*)

+    kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null`

+    if test -n "$kargmax"; then

+      lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[	 ]]//'`

+    else

+      lt_cv_sys_max_cmd_len=32768

+    fi

+    ;;

+  *)

+    lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`

+    if test -n "$lt_cv_sys_max_cmd_len"; then

+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`

+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`

+    else

+      # Make teststring a little bigger before we do anything with it.

+      # a 1K string should be a reasonable start.

+      for i in 1 2 3 4 5 6 7 8 ; do

+        teststring=$teststring$teststring

+      done

+      SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}

+      # If test is not a shell built-in, we'll probably end up computing a

+      # maximum length that is only half of the actual maximum length, but

+      # we can't tell.

+      while { test "X"`$SHELL [$]0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \

+	         = "XX$teststring$teststring"; } >/dev/null 2>&1 &&

+	      test $i != 17 # 1/2 MB should be enough

+      do

+        i=`expr $i + 1`

+        teststring=$teststring$teststring

+      done

+      # Only check the string length outside the loop.

+      lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1`

+      teststring=

+      # Add a significant safety factor because C++ compilers can tack on

+      # massive amounts of additional arguments before passing them to the

+      # linker.  It appears as though 1/2 is a usable value.

+      lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`

+    fi

+    ;;

+  esac

+])

+if test -n $lt_cv_sys_max_cmd_len ; then

+  AC_MSG_RESULT($lt_cv_sys_max_cmd_len)

+else

+  AC_MSG_RESULT(none)

+fi

+max_cmd_len=$lt_cv_sys_max_cmd_len

+_LT_DECL([], [max_cmd_len], [0],

+    [What is the maximum length of a command?])

+])# LT_CMD_MAX_LEN

+

+# Old name:

+AU_ALIAS([AC_LIBTOOL_SYS_MAX_CMD_LEN], [LT_CMD_MAX_LEN])

+dnl aclocal-1.4 backwards compatibility:

+dnl AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [])

+

+

+# _LT_HEADER_DLFCN

+# ----------------

+m4_defun([_LT_HEADER_DLFCN],

+[AC_CHECK_HEADERS([dlfcn.h], [], [], [AC_INCLUDES_DEFAULT])dnl

+])# _LT_HEADER_DLFCN

+

+

+# _LT_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE,

+#                      ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING)

+# ----------------------------------------------------------------

+m4_defun([_LT_TRY_DLOPEN_SELF],

+[m4_require([_LT_HEADER_DLFCN])dnl

+if test "$cross_compiling" = yes; then :

+  [$4]

+else

+  lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2

+  lt_status=$lt_dlunknown

+  cat > conftest.$ac_ext <<_LT_EOF

+[#line __oline__ "configure"

+#include "confdefs.h"

+

+#if HAVE_DLFCN_H

+#include <dlfcn.h>

+#endif

+

+#include <stdio.h>

+

+#ifdef RTLD_GLOBAL

+#  define LT_DLGLOBAL		RTLD_GLOBAL

+#else

+#  ifdef DL_GLOBAL

+#    define LT_DLGLOBAL		DL_GLOBAL

+#  else

+#    define LT_DLGLOBAL		0

+#  endif

+#endif

+

+/* We may have to define LT_DLLAZY_OR_NOW in the command line if we

+   find out it does not work in some platform. */

+#ifndef LT_DLLAZY_OR_NOW

+#  ifdef RTLD_LAZY

+#    define LT_DLLAZY_OR_NOW		RTLD_LAZY

+#  else

+#    ifdef DL_LAZY

+#      define LT_DLLAZY_OR_NOW		DL_LAZY

+#    else

+#      ifdef RTLD_NOW

+#        define LT_DLLAZY_OR_NOW	RTLD_NOW

+#      else

+#        ifdef DL_NOW

+#          define LT_DLLAZY_OR_NOW	DL_NOW

+#        else

+#          define LT_DLLAZY_OR_NOW	0

+#        endif

+#      endif

+#    endif

+#  endif

+#endif

+

+void fnord() { int i=42;}

+int main ()

+{

+  void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);

+  int status = $lt_dlunknown;

+

+  if (self)

+    {

+      if (dlsym (self,"fnord"))       status = $lt_dlno_uscore;

+      else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;

+      /* dlclose (self); */

+    }

+  else

+    puts (dlerror ());

+

+  return status;

+}]

+_LT_EOF

+  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then

+    (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null

+    lt_status=$?

+    case x$lt_status in

+      x$lt_dlno_uscore) $1 ;;

+      x$lt_dlneed_uscore) $2 ;;

+      x$lt_dlunknown|x*) $3 ;;

+    esac

+  else :

+    # compilation failed

+    $3

+  fi

+fi

+rm -fr conftest*

+])# _LT_TRY_DLOPEN_SELF

+

+

+# LT_SYS_DLOPEN_SELF

+# ------------------

+AC_DEFUN([LT_SYS_DLOPEN_SELF],

+[m4_require([_LT_HEADER_DLFCN])dnl

+if test "x$enable_dlopen" != xyes; then

+  enable_dlopen=unknown

+  enable_dlopen_self=unknown

+  enable_dlopen_self_static=unknown

+else

+  lt_cv_dlopen=no

+  lt_cv_dlopen_libs=

+

+  case $host_os in

+  beos*)

+    lt_cv_dlopen="load_add_on"

+    lt_cv_dlopen_libs=

+    lt_cv_dlopen_self=yes

+    ;;

+

+  mingw* | pw32* | cegcc*)

+    lt_cv_dlopen="LoadLibrary"

+    lt_cv_dlopen_libs=

+    ;;

+

+  cygwin*)

+    lt_cv_dlopen="dlopen"

+    lt_cv_dlopen_libs=

+    ;;

+

+  darwin*)

+  # if libdl is installed we need to link against it

+    AC_CHECK_LIB([dl], [dlopen],

+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[

+    lt_cv_dlopen="dyld"

+    lt_cv_dlopen_libs=

+    lt_cv_dlopen_self=yes

+    ])

+    ;;

+

+  *)

+    AC_CHECK_FUNC([shl_load],

+	  [lt_cv_dlopen="shl_load"],

+      [AC_CHECK_LIB([dld], [shl_load],

+	    [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],

+	[AC_CHECK_FUNC([dlopen],

+	      [lt_cv_dlopen="dlopen"],

+	  [AC_CHECK_LIB([dl], [dlopen],

+		[lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],

+	    [AC_CHECK_LIB([svld], [dlopen],

+		  [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],

+	      [AC_CHECK_LIB([dld], [dld_link],

+		    [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])

+	      ])

+	    ])

+	  ])

+	])

+      ])

+    ;;

+  esac

+

+  if test "x$lt_cv_dlopen" != xno; then

+    enable_dlopen=yes

+  else

+    enable_dlopen=no

+  fi

+

+  case $lt_cv_dlopen in

+  dlopen)

+    save_CPPFLAGS="$CPPFLAGS"

+    test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"

+

+    save_LDFLAGS="$LDFLAGS"

+    wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"

+

+    save_LIBS="$LIBS"

+    LIBS="$lt_cv_dlopen_libs $LIBS"

+

+    AC_CACHE_CHECK([whether a program can dlopen itself],

+	  lt_cv_dlopen_self, [dnl

+	  _LT_TRY_DLOPEN_SELF(

+	    lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes,

+	    lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)

+    ])

+

+    if test "x$lt_cv_dlopen_self" = xyes; then

+      wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"

+      AC_CACHE_CHECK([whether a statically linked program can dlopen itself],

+	  lt_cv_dlopen_self_static, [dnl

+	  _LT_TRY_DLOPEN_SELF(

+	    lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes,

+	    lt_cv_dlopen_self_static=no,  lt_cv_dlopen_self_static=cross)

+      ])

+    fi

+

+    CPPFLAGS="$save_CPPFLAGS"

+    LDFLAGS="$save_LDFLAGS"

+    LIBS="$save_LIBS"

+    ;;

+  esac

+

+  case $lt_cv_dlopen_self in

+  yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;

+  *) enable_dlopen_self=unknown ;;

+  esac

+

+  case $lt_cv_dlopen_self_static in

+  yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;

+  *) enable_dlopen_self_static=unknown ;;

+  esac

+fi

+_LT_DECL([dlopen_support], [enable_dlopen], [0],

+	 [Whether dlopen is supported])

+_LT_DECL([dlopen_self], [enable_dlopen_self], [0],

+	 [Whether dlopen of programs is supported])

+_LT_DECL([dlopen_self_static], [enable_dlopen_self_static], [0],

+	 [Whether dlopen of statically linked programs is supported])

+])# LT_SYS_DLOPEN_SELF

+

+# Old name:

+AU_ALIAS([AC_LIBTOOL_DLOPEN_SELF], [LT_SYS_DLOPEN_SELF])

+dnl aclocal-1.4 backwards compatibility:

+dnl AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [])

+

+

+# _LT_COMPILER_C_O([TAGNAME])

+# ---------------------------

+# Check to see if options -c and -o are simultaneously supported by compiler.

+# This macro does not hard code the compiler like AC_PROG_CC_C_O.

+m4_defun([_LT_COMPILER_C_O],

+[m4_require([_LT_DECL_SED])dnl

+m4_require([_LT_FILEUTILS_DEFAULTS])dnl

+m4_require([_LT_TAG_COMPILER])dnl

+AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext],

+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)],

+  [_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no

+   $RM -r conftest 2>/dev/null

+   mkdir conftest

+   cd conftest

+   mkdir out

+   echo "$lt_simple_compile_test_code" > conftest.$ac_ext

+

+   lt_compiler_flag="-o out/conftest2.$ac_objext"

+   # Insert the option either (1) after the last *FLAGS variable, or

+   # (2) before a word containing "conftest.", or (3) at the end.

+   # Note that $ac_compile itself does not contain backslashes and begins

+   # with a dollar sign (not a hyphen), so the echo should work correctly.

+   lt_compile=`echo "$ac_compile" | $SED \

+   -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \

+   -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \

+   -e 's:$: $lt_compiler_flag:'`

+   (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD)

+   (eval "$lt_compile" 2>out/conftest.err)

+   ac_status=$?

+   cat out/conftest.err >&AS_MESSAGE_LOG_FD

+   echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD

+   if (exit $ac_status) && test -s out/conftest2.$ac_objext

+   then

+     # The compiler can only warn and ignore the option if not recognized

+     # So say no if there are warnings

+     $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp

+     $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2

+     if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then

+       _LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes

+     fi

+   fi

+   chmod u+w . 2>&AS_MESSAGE_LOG_FD

+   $RM conftest*

+   # SGI C++ compiler will create directory out/ii_files/ for

+   # template instantiation

+   test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files

+   $RM out/* && rmdir out

+   cd ..

+   $RM -r conftest

+   $RM conftest*

+])

+_LT_TAGDECL([compiler_c_o], [lt_cv_prog_compiler_c_o], [1],

+	[Does compiler simultaneously support -c and -o options?])

+])# _LT_COMPILER_C_O

+

+

+# _LT_COMPILER_FILE_LOCKS([TAGNAME])

+# ----------------------------------

+# Check to see if we can do hard links to lock some files if needed

+m4_defun([_LT_COMPILER_FILE_LOCKS],

+[m4_require([_LT_ENABLE_LOCK])dnl

+m4_require([_LT_FILEUTILS_DEFAULTS])dnl

+_LT_COMPILER_C_O([$1])

+

+hard_links="nottested"

+if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then

+  # do not overwrite the value of need_locks provided by the user

+  AC_MSG_CHECKING([if we can lock with hard links])

+  hard_links=yes

+  $RM conftest*

+  ln conftest.a conftest.b 2>/dev/null && hard_links=no

+  touch conftest.a

+  ln conftest.a conftest.b 2>&5 || hard_links=no

+  ln conftest.a conftest.b 2>/dev/null && hard_links=no

+  AC_MSG_RESULT([$hard_links])

+  if test "$hard_links" = no; then

+    AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])

+    need_locks=warn

+  fi

+else

+  need_locks=no

+fi

+_LT_DECL([], [need_locks], [1], [Must we lock files when doing compilation?])

+])# _LT_COMPILER_FILE_LOCKS

+

+

+# _LT_CHECK_OBJDIR

+# ----------------

+m4_defun([_LT_CHECK_OBJDIR],

+[AC_CACHE_CHECK([for objdir], [lt_cv_objdir],

+[rm -f .libs 2>/dev/null

+mkdir .libs 2>/dev/null

+if test -d .libs; then

+  lt_cv_objdir=.libs

+else

+  # MS-DOS does not allow filenames that begin with a dot.

+  lt_cv_objdir=_libs

+fi

+rmdir .libs 2>/dev/null])

+objdir=$lt_cv_objdir

+_LT_DECL([], [objdir], [0],

+         [The name of the directory that contains temporary libtool files])dnl

+m4_pattern_allow([LT_OBJDIR])dnl

+AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",

+  [Define to the sub-directory in which libtool stores uninstalled libraries.])

+])# _LT_CHECK_OBJDIR

+

+

+# _LT_LINKER_HARDCODE_LIBPATH([TAGNAME])

+# --------------------------------------

+# Check hardcoding attributes.

+m4_defun([_LT_LINKER_HARDCODE_LIBPATH],

+[AC_MSG_CHECKING([how to hardcode library paths into programs])

+_LT_TAGVAR(hardcode_action, $1)=

+if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||

+   test -n "$_LT_TAGVAR(runpath_var, $1)" ||

+   test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then

+

+  # We can hardcode non-existent directories.

+  if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&

+     # If the only mechanism to avoid hardcoding is shlibpath_var, we

+     # have to relink, otherwise we might link with an installed library

+     # when we should be linking with a yet-to-be-installed one

+     ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&

+     test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then

+    # Linking always hardcodes the temporary library directory.

+    _LT_TAGVAR(hardcode_action, $1)=relink

+  else

+    # We can link without hardcoding, and we can hardcode nonexisting dirs.

+    _LT_TAGVAR(hardcode_action, $1)=immediate

+  fi

+else

+  # We cannot hardcode anything, or else we can only hardcode existing

+  # directories.

+  _LT_TAGVAR(hardcode_action, $1)=unsupported

+fi

+AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])

+

+if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||

+   test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then

+  # Fast installation is not supported

+  enable_fast_install=no

+elif test "$shlibpath_overrides_runpath" = yes ||

+     test "$enable_shared" = no; then

+  # Fast installation is not necessary

+  enable_fast_install=needless

+fi

+_LT_TAGDECL([], [hardcode_action], [0],

+    [How to hardcode a shared library path into an executable])

+])# _LT_LINKER_HARDCODE_LIBPATH

+

+

+# _LT_CMD_STRIPLIB

+# ----------------

+m4_defun([_LT_CMD_STRIPLIB],

+[m4_require([_LT_DECL_EGREP])

+striplib=

+old_striplib=

+AC_MSG_CHECKING([whether stripping libraries is possible])

+if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then

+  test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"

+  test -z "$striplib" && striplib="$STRIP --strip-unneeded"

+  AC_MSG_RESULT([yes])

+else

+# FIXME - insert some real tests, host_os isn't really good enough

+  case $host_os in

+  darwin*)

+    if test -n "$STRIP" ; then

+      striplib="$STRIP -x"

+      old_striplib="$STRIP -S"

+      AC_MSG_RESULT([yes])

+    else

+      AC_MSG_RESULT([no])

+    fi

+    ;;

+  *)

+    AC_MSG_RESULT([no])

+    ;;

+  esac

+fi

+_LT_DECL([], [old_striplib], [1], [Commands to strip libraries])

+_LT_DECL([], [striplib], [1])

+])# _LT_CMD_STRIPLIB

+

+

+# _LT_SYS_DYNAMIC_LINKER([TAG])

+# -----------------------------

+# PORTME Fill in your ld.so characteristics

+m4_defun([_LT_SYS_DYNAMIC_LINKER],

+[AC_REQUIRE([AC_CANONICAL_HOST])dnl

+m4_require([_LT_DECL_EGREP])dnl

+m4_require([_LT_FILEUTILS_DEFAULTS])dnl

+m4_require([_LT_DECL_OBJDUMP])dnl

+m4_require([_LT_DECL_SED])dnl

+AC_MSG_CHECKING([dynamic linker characteristics])

+m4_if([$1],

+	[], [

+if test "$GCC" = yes; then

+  case $host_os in

+    darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;

+    *) lt_awk_arg="/^libraries:/" ;;

+  esac

+  lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"`

+  if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then

+    # if the path contains ";" then we assume it to be the separator

+    # otherwise default to the standard path separator (i.e. ":") - it is

+    # assumed that no part of a normal pathname contains ";" but that should

+    # okay in the real world where ";" in dirpaths is itself problematic.

+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'`

+  else

+    lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`

+  fi

+  # Ok, now we have the path, separated by spaces, we can step through it

+  # and add multilib dir if necessary.

+  lt_tmp_lt_search_path_spec=

+  lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`

+  for lt_sys_path in $lt_search_path_spec; do

+    if test -d "$lt_sys_path/$lt_multi_os_dir"; then

+      lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"

+    else

+      test -d "$lt_sys_path" && \

+	lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"

+    fi

+  done

+  lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk '

+BEGIN {RS=" "; FS="/|\n";} {

+  lt_foo="";

+  lt_count=0;

+  for (lt_i = NF; lt_i > 0; lt_i--) {

+    if ($lt_i != "" && $lt_i != ".") {

+      if ($lt_i == "..") {

+        lt_count++;

+      } else {

+        if (lt_count == 0) {

+          lt_foo="/" $lt_i lt_foo;

+        } else {

+          lt_count--;

+        }

+      }

+    }

+  }

+  if (lt_foo != "") { lt_freq[[lt_foo]]++; }

+  if (lt_freq[[lt_foo]] == 1) { print lt_foo; }

+}'`

+  sys_lib_search_path_spec=`$ECHO $lt_search_path_spec`

+else

+  sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"

+fi])

+library_names_spec=

+libname_spec='lib$name'

+soname_spec=

+shrext_cmds=".so"

+postinstall_cmds=

+postuninstall_cmds=

+finish_cmds=

+finish_eval=

+shlibpath_var=

+shlibpath_overrides_runpath=unknown

+version_type=none

+dynamic_linker="$host_os ld.so"

+sys_lib_dlsearch_path_spec="/lib /usr/lib"

+need_lib_prefix=unknown

+hardcode_into_libs=no

+

+# when you set need_version to no, make sure it does not cause -set_version

+# flags to be left without arguments

+need_version=unknown

+

+case $host_os in

+aix3*)

+  version_type=linux

+  library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'

+  shlibpath_var=LIBPATH

+

+  # AIX 3 has no versioning support, so we append a major version to the name.

+  soname_spec='${libname}${release}${shared_ext}$major'

+  ;;

+

+aix[[4-9]]*)

+  version_type=linux

+  need_lib_prefix=no

+  need_version=no

+  hardcode_into_libs=yes

+  if test "$host_cpu" = ia64; then

+    # AIX 5 supports IA64

+    library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'

+    shlibpath_var=LD_LIBRARY_PATH

+  else

+    # With GCC up to 2.95.x, collect2 would create an import file

+    # for dependence libraries.  The import file would start with

+    # the line `#! .'.  This would cause the generated library to

+    # depend on `.', always an invalid library.  This was fixed in

+    # development snapshots of GCC prior to 3.0.

+    case $host_os in

+      aix4 | aix4.[[01]] | aix4.[[01]].*)

+      if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'

+	   echo ' yes '

+	   echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then

+	:

+      else

+	can_build_shared=no

+      fi

+      ;;

+    esac

+    # AIX (on Power*) has no versioning support, so currently we can not hardcode correct

+    # soname into executable. Probably we can add versioning support to

+    # collect2, so additional links can be useful in future.

+    if test "$aix_use_runtimelinking" = yes; then

+      # If using run time linking (on AIX 4.2 or later) use lib<name>.so

+      # instead of lib<name>.a to let people know that these are not

+      # typical AIX shared libraries.

+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

+    else

+      # We preserve .a as extension for shared libraries through AIX4.2

+      # and later when we are not doing run time linking.

+      library_names_spec='${libname}${release}.a $libname.a'

+      soname_spec='${libname}${release}${shared_ext}$major'

+    fi

+    shlibpath_var=LIBPATH

+  fi

+  ;;

+

+amigaos*)

+  case $host_cpu in

+  powerpc)

+    # Since July 2007 AmigaOS4 officially supports .so libraries.

+    # When compiling the executable, add -use-dynld -Lsobjs: to the compileline.

+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

+    ;;

+  m68k)

+    library_names_spec='$libname.ixlibrary $libname.a'

+    # Create ${libname}_ixlibrary.a entries in /sys/libs.

+    finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'

+    ;;

+  esac

+  ;;

+

+beos*)

+  library_names_spec='${libname}${shared_ext}'

+  dynamic_linker="$host_os ld.so"

+  shlibpath_var=LIBRARY_PATH

+  ;;

+

+bsdi[[45]]*)

+  version_type=linux

+  need_version=no

+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

+  soname_spec='${libname}${release}${shared_ext}$major'

+  finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'

+  shlibpath_var=LD_LIBRARY_PATH

+  sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"

+  sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"

+  # the default ld.so.conf also contains /usr/contrib/lib and

+  # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow

+  # libtool to hard-code these into programs

+  ;;

+

+cygwin* | mingw* | pw32* | cegcc*)

+  version_type=windows

+  shrext_cmds=".dll"

+  need_version=no

+  need_lib_prefix=no

+

+  case $GCC,$host_os in

+  yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*)

+    library_names_spec='$libname.dll.a'

+    # DLL is installed to $(libdir)/../bin by postinstall_cmds

+    postinstall_cmds='base_file=`basename \${file}`~

+      dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~

+      dldir=$destdir/`dirname \$dlpath`~

+      test -d \$dldir || mkdir -p \$dldir~

+      $install_prog $dir/$dlname \$dldir/$dlname~

+      chmod a+x \$dldir/$dlname~

+      if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then

+        eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;

+      fi'

+    postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~

+      dlpath=$dir/\$dldll~

+       $RM \$dlpath'

+    shlibpath_overrides_runpath=yes

+

+    case $host_os in

+    cygwin*)

+      # Cygwin DLLs use 'cyg' prefix rather than 'lib'

+      soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'

+      sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"

+      ;;

+    mingw* | cegcc*)

+      # MinGW DLLs use traditional 'lib' prefix

+      soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'

+      sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`

+      if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then

+        # It is most probably a Windows format PATH printed by

+        # mingw gcc, but we are running on Cygwin. Gcc prints its search

+        # path with ; separators, and with drive letters. We can handle the

+        # drive letters (cygwin fileutils understands them), so leave them,

+        # especially as we might pass files found there to a mingw objdump,

+        # which wouldn't understand a cygwinified path. Ahh.

+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`

+      else

+        sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED  -e "s/$PATH_SEPARATOR/ /g"`

+      fi

+      ;;

+    pw32*)

+      # pw32 DLLs use 'pw' prefix rather than 'lib'

+      library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'

+      ;;

+    esac

+    ;;

+

+  *)

+    library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'

+    ;;

+  esac

+  dynamic_linker='Win32 ld.exe'

+  # FIXME: first we should search . and the directory the executable is in

+  shlibpath_var=PATH

+  ;;

+

+darwin* | rhapsody*)

+  dynamic_linker="$host_os dyld"

+  version_type=darwin

+  need_lib_prefix=no

+  need_version=no

+  library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'

+  soname_spec='${libname}${release}${major}$shared_ext'

+  shlibpath_overrides_runpath=yes

+  shlibpath_var=DYLD_LIBRARY_PATH

+  shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'

+m4_if([$1], [],[

+  sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"])

+  sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'

+  ;;

+

+dgux*)

+  version_type=linux

+  need_lib_prefix=no

+  need_version=no

+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'

+  soname_spec='${libname}${release}${shared_ext}$major'

+  shlibpath_var=LD_LIBRARY_PATH

+  ;;

+

+freebsd1*)

+  dynamic_linker=no

+  ;;

+

+freebsd* | dragonfly*)

+  # DragonFly does not have aout.  When/if they implement a new

+  # versioning mechanism, adjust this.

+  if test -x /usr/bin/objformat; then

+    objformat=`/usr/bin/objformat`

+  else

+    case $host_os in

+    freebsd[[123]]*) objformat=aout ;;

+    *) objformat=elf ;;

+    esac

+  fi

+  version_type=freebsd-$objformat

+  case $version_type in

+    freebsd-elf*)

+      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'

+      need_version=no

+      need_lib_prefix=no

+      ;;

+    freebsd-*)

+      library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'

+      need_version=yes

+      ;;

+  esac

+  shlibpath_var=LD_LIBRARY_PATH

+  case $host_os in

+  freebsd2*)

+    shlibpath_overrides_runpath=yes

+    ;;

+  freebsd3.[[01]]* | freebsdelf3.[[01]]*)

+    shlibpath_overrides_runpath=yes

+    hardcode_into_libs=yes

+    ;;

+  freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \

+  freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1)

+    shlibpath_overrides_runpath=no

+    hardcode_into_libs=yes

+    ;;

+  *) # from 4.6 on, and DragonFly

+    shlibpath_overrides_runpath=yes

+    hardcode_into_libs=yes

+    ;;

+  esac

+  ;;

+

+gnu*)

+  version_type=linux

+  need_lib_prefix=no

+  need_version=no

+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'

+  soname_spec='${libname}${release}${shared_ext}$major'

+  shlibpath_var=LD_LIBRARY_PATH

+  hardcode_into_libs=yes

+  ;;

+

+hpux9* | hpux10* | hpux11*)

+  # Give a soname corresponding to the major version so that dld.sl refuses to

+  # link against other versions.

+  version_type=sunos

+  need_lib_prefix=no

+  need_version=no

+  case $host_cpu in

+  ia64*)

+    shrext_cmds='.so'

+    hardcode_into_libs=yes

+    dynamic_linker="$host_os dld.so"

+    shlibpath_var=LD_LIBRARY_PATH

+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.

+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

+    soname_spec='${libname}${release}${shared_ext}$major'

+    if test "X$HPUX_IA64_MODE" = X32; then

+      sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"

+    else

+      sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"

+    fi

+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec

+    ;;

+  hppa*64*)

+    shrext_cmds='.sl'

+    hardcode_into_libs=yes

+    dynamic_linker="$host_os dld.sl"

+    shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH

+    shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.

+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

+    soname_spec='${libname}${release}${shared_ext}$major'

+    sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"

+    sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec

+    ;;

+  *)

+    shrext_cmds='.sl'

+    dynamic_linker="$host_os dld.sl"

+    shlibpath_var=SHLIB_PATH

+    shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH

+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

+    soname_spec='${libname}${release}${shared_ext}$major'

+    ;;

+  esac

+  # HP-UX runs *really* slowly unless shared libraries are mode 555.

+  postinstall_cmds='chmod 555 $lib'

+  ;;

+

+interix[[3-9]]*)

+  version_type=linux

+  need_lib_prefix=no

+  need_version=no

+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'

+  soname_spec='${libname}${release}${shared_ext}$major'

+  dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'

+  shlibpath_var=LD_LIBRARY_PATH

+  shlibpath_overrides_runpath=no

+  hardcode_into_libs=yes

+  ;;

+

+irix5* | irix6* | nonstopux*)

+  case $host_os in

+    nonstopux*) version_type=nonstopux ;;

+    *)

+	if test "$lt_cv_prog_gnu_ld" = yes; then

+		version_type=linux

+	else

+		version_type=irix

+	fi ;;

+  esac

+  need_lib_prefix=no

+  need_version=no

+  soname_spec='${libname}${release}${shared_ext}$major'

+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'

+  case $host_os in

+  irix5* | nonstopux*)

+    libsuff= shlibsuff=

+    ;;

+  *)

+    case $LD in # libtool.m4 will add one of these switches to LD

+    *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")

+      libsuff= shlibsuff= libmagic=32-bit;;

+    *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")

+      libsuff=32 shlibsuff=N32 libmagic=N32;;

+    *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")

+      libsuff=64 shlibsuff=64 libmagic=64-bit;;

+    *) libsuff= shlibsuff= libmagic=never-match;;

+    esac

+    ;;

+  esac

+  shlibpath_var=LD_LIBRARY${shlibsuff}_PATH

+  shlibpath_overrides_runpath=no

+  sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"

+  sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"

+  hardcode_into_libs=yes

+  ;;

+

+# No shared lib support for Linux oldld, aout, or coff.

+linux*oldld* | linux*aout* | linux*coff*)

+  dynamic_linker=no

+  ;;

+

+# This must be Linux ELF.

+linux* | k*bsd*-gnu | kopensolaris*-gnu)

+  version_type=linux

+  need_lib_prefix=no

+  need_version=no

+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

+  soname_spec='${libname}${release}${shared_ext}$major'

+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'

+  shlibpath_var=LD_LIBRARY_PATH

+  shlibpath_overrides_runpath=no

+  # Some binutils ld are patched to set DT_RUNPATH

+  save_LDFLAGS=$LDFLAGS

+  save_libdir=$libdir

+  eval "libdir=/foo; wl=\"$_LT_TAGVAR(lt_prog_compiler_wl, $1)\"; \

+       LDFLAGS=\"\$LDFLAGS $_LT_TAGVAR(hardcode_libdir_flag_spec, $1)\""

+  AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],

+    [AS_IF([ ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null],

+       [shlibpath_overrides_runpath=yes])])

+  LDFLAGS=$save_LDFLAGS

+  libdir=$save_libdir

+

+  # This implies no fast_install, which is unacceptable.

+  # Some rework will be needed to allow for fast_install

+  # before this can be enabled.

+  hardcode_into_libs=yes

+

+  # Append ld.so.conf contents to the search path

+  if test -f /etc/ld.so.conf; then

+    lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[	 ]*hwcap[	 ]/d;s/[:,	]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '`

+    sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"

+  fi

+

+  # We used to test for /lib/ld.so.1 and disable shared libraries on

+  # powerpc, because MkLinux only supported shared libraries with the

+  # GNU dynamic linker.  Since this was broken with cross compilers,

+  # most powerpc-linux boxes support dynamic linking these days and

+  # people can always --disable-shared, the test was removed, and we

+  # assume the GNU/Linux dynamic linker is in use.

+  dynamic_linker='GNU/Linux ld.so'

+  ;;

+

+netbsdelf*-gnu)

+  version_type=linux

+  need_lib_prefix=no

+  need_version=no

+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'

+  soname_spec='${libname}${release}${shared_ext}$major'

+  shlibpath_var=LD_LIBRARY_PATH

+  shlibpath_overrides_runpath=no

+  hardcode_into_libs=yes

+  dynamic_linker='NetBSD ld.elf_so'

+  ;;

+

+netbsd*)

+  version_type=sunos

+  need_lib_prefix=no

+  need_version=no

+  if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then

+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'

+    finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'

+    dynamic_linker='NetBSD (a.out) ld.so'

+  else

+    library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'

+    soname_spec='${libname}${release}${shared_ext}$major'

+    dynamic_linker='NetBSD ld.elf_so'

+  fi

+  shlibpath_var=LD_LIBRARY_PATH

+  shlibpath_overrides_runpath=yes

+  hardcode_into_libs=yes

+  ;;

+

+newsos6)

+  version_type=linux

+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

+  shlibpath_var=LD_LIBRARY_PATH

+  shlibpath_overrides_runpath=yes

+  ;;

+

+*nto* | *qnx*)

+  version_type=qnx

+  need_lib_prefix=no

+  need_version=no

+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

+  soname_spec='${libname}${release}${shared_ext}$major'

+  shlibpath_var=LD_LIBRARY_PATH

+  shlibpath_overrides_runpath=no

+  hardcode_into_libs=yes

+  dynamic_linker='ldqnx.so'

+  ;;

+

+openbsd*)

+  version_type=sunos

+  sys_lib_dlsearch_path_spec="/usr/lib"

+  need_lib_prefix=no

+  # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.

+  case $host_os in

+    openbsd3.3 | openbsd3.3.*)	need_version=yes ;;

+    *)				need_version=no  ;;

+  esac

+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'

+  finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'

+  shlibpath_var=LD_LIBRARY_PATH

+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then

+    case $host_os in

+      openbsd2.[[89]] | openbsd2.[[89]].*)

+	shlibpath_overrides_runpath=no

+	;;

+      *)

+	shlibpath_overrides_runpath=yes

+	;;

+      esac

+  else

+    shlibpath_overrides_runpath=yes

+  fi

+  ;;

+

+os2*)

+  libname_spec='$name'

+  shrext_cmds=".dll"

+  need_lib_prefix=no

+  library_names_spec='$libname${shared_ext} $libname.a'

+  dynamic_linker='OS/2 ld.exe'

+  shlibpath_var=LIBPATH

+  ;;

+

+osf3* | osf4* | osf5*)

+  version_type=osf

+  need_lib_prefix=no

+  need_version=no

+  soname_spec='${libname}${release}${shared_ext}$major'

+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

+  shlibpath_var=LD_LIBRARY_PATH

+  sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"

+  sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"

+  ;;

+

+rdos*)

+  dynamic_linker=no

+  ;;

+

+solaris*)

+  version_type=linux

+  need_lib_prefix=no

+  need_version=no

+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

+  soname_spec='${libname}${release}${shared_ext}$major'

+  shlibpath_var=LD_LIBRARY_PATH

+  shlibpath_overrides_runpath=yes

+  hardcode_into_libs=yes

+  # ldd complains unless libraries are executable

+  postinstall_cmds='chmod +x $lib'

+  ;;

+

+sunos4*)

+  version_type=sunos

+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'

+  finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'

+  shlibpath_var=LD_LIBRARY_PATH

+  shlibpath_overrides_runpath=yes

+  if test "$with_gnu_ld" = yes; then

+    need_lib_prefix=no

+  fi

+  need_version=yes

+  ;;

+

+sysv4 | sysv4.3*)

+  version_type=linux

+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

+  soname_spec='${libname}${release}${shared_ext}$major'

+  shlibpath_var=LD_LIBRARY_PATH

+  case $host_vendor in

+    sni)

+      shlibpath_overrides_runpath=no

+      need_lib_prefix=no

+      runpath_var=LD_RUN_PATH

+      ;;

+    siemens)

+      need_lib_prefix=no

+      ;;

+    motorola)

+      need_lib_prefix=no

+      need_version=no

+      shlibpath_overrides_runpath=no

+      sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'

+      ;;

+  esac

+  ;;

+

+sysv4*MP*)

+  if test -d /usr/nec ;then

+    version_type=linux

+    library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'

+    soname_spec='$libname${shared_ext}.$major'

+    shlibpath_var=LD_LIBRARY_PATH

+  fi

+  ;;

+

+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)

+  version_type=freebsd-elf

+  need_lib_prefix=no

+  need_version=no

+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'

+  soname_spec='${libname}${release}${shared_ext}$major'

+  shlibpath_var=LD_LIBRARY_PATH

+  shlibpath_overrides_runpath=yes

+  hardcode_into_libs=yes

+  if test "$with_gnu_ld" = yes; then

+    sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'

+  else

+    sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'

+    case $host_os in

+      sco3.2v5*)

+        sys_lib_search_path_spec="$sys_lib_search_path_spec /lib"

+	;;

+    esac

+  fi

+  sys_lib_dlsearch_path_spec='/usr/lib'

+  ;;

+

+tpf*)

+  # TPF is a cross-target only.  Preferred cross-host = GNU/Linux.

+  version_type=linux

+  need_lib_prefix=no

+  need_version=no

+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

+  shlibpath_var=LD_LIBRARY_PATH

+  shlibpath_overrides_runpath=no

+  hardcode_into_libs=yes

+  ;;

+

+uts4*)

+  version_type=linux

+  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'

+  soname_spec='${libname}${release}${shared_ext}$major'

+  shlibpath_var=LD_LIBRARY_PATH

+  ;;

+

+*)

+  dynamic_linker=no

+  ;;

+esac

+AC_MSG_RESULT([$dynamic_linker])

+test "$dynamic_linker" = no && can_build_shared=no

+

+variables_saved_for_relink="PATH $shlibpath_var $runpath_var"

+if test "$GCC" = yes; then

+  variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"

+fi

+

+if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then

+  sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"

+fi

+if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then

+  sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"

+fi

+

+_LT_DECL([], [variables_saved_for_relink], [1],

+    [Variables whose values should be saved in libtool wrapper scripts and

+    restored at link time])

+_LT_DECL([], [need_lib_prefix], [0],

+    [Do we need the "lib" prefix for modules?])

+_LT_DECL([], [need_version], [0], [Do we need a version for libraries?])

+_LT_DECL([], [version_type], [0], [Library versioning type])

+_LT_DECL([], [runpath_var], [0],  [Shared library runtime path variable])

+_LT_DECL([], [shlibpath_var], [0],[Shared library path variable])

+_LT_DECL([], [shlibpath_overrides_runpath], [0],

+    [Is shlibpath searched before the hard-coded library search path?])

+_LT_DECL([], [libname_spec], [1], [Format of library name prefix])

+_LT_DECL([], [library_names_spec], [1],

+    [[List of archive names.  First name is the real one, the rest are links.

+    The last name is the one that the linker finds with -lNAME]])

+_LT_DECL([], [soname_spec], [1],

+    [[The coded name of the library, if different from the real name]])

+_LT_DECL([], [postinstall_cmds], [2],

+    [Command to use after installation of a shared archive])

+_LT_DECL([], [postuninstall_cmds], [2],

+    [Command to use after uninstallation of a shared archive])

+_LT_DECL([], [finish_cmds], [2],

+    [Commands used to finish a libtool library installation in a directory])

+_LT_DECL([], [finish_eval], [1],

+    [[As "finish_cmds", except a single script fragment to be evaled but

+    not shown]])

+_LT_DECL([], [hardcode_into_libs], [0],

+    [Whether we should hardcode library paths into libraries])

+_LT_DECL([], [sys_lib_search_path_spec], [2],

+    [Compile-time system search path for libraries])

+_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],

+    [Run-time system search path for libraries])

+])# _LT_SYS_DYNAMIC_LINKER

+

+

+# _LT_PATH_TOOL_PREFIX(TOOL)

+# --------------------------

+# find a file program which can recognize shared library

+AC_DEFUN([_LT_PATH_TOOL_PREFIX],

+[m4_require([_LT_DECL_EGREP])dnl

+AC_MSG_CHECKING([for $1])

+AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,

+[case $MAGIC_CMD in

+[[\\/*] |  ?:[\\/]*])

+  lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.

+  ;;

+*)

+  lt_save_MAGIC_CMD="$MAGIC_CMD"

+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR

+dnl $ac_dummy forces splitting on constant user-supplied paths.

+dnl POSIX.2 word splitting is done only on the output of word expansions,

+dnl not every word.  This closes a longstanding sh security hole.

+  ac_dummy="m4_if([$2], , $PATH, [$2])"

+  for ac_dir in $ac_dummy; do

+    IFS="$lt_save_ifs"

+    test -z "$ac_dir" && ac_dir=.

+    if test -f $ac_dir/$1; then

+      lt_cv_path_MAGIC_CMD="$ac_dir/$1"

+      if test -n "$file_magic_test_file"; then

+	case $deplibs_check_method in

+	"file_magic "*)

+	  file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`

+	  MAGIC_CMD="$lt_cv_path_MAGIC_CMD"

+	  if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |

+	    $EGREP "$file_magic_regex" > /dev/null; then

+	    :

+	  else

+	    cat <<_LT_EOF 1>&2

+

+*** Warning: the command libtool uses to detect shared libraries,

+*** $file_magic_cmd, produces output that libtool cannot recognize.

+*** The result is that libtool may fail to recognize shared libraries

+*** as such.  This will affect the creation of libtool libraries that

+*** depend on shared libraries, but programs linked with such libtool

+*** libraries will work regardless of this problem.  Nevertheless, you

+*** may want to report the problem to your system manager and/or to

+*** bug-libtool@gnu.org

+

+_LT_EOF

+	  fi ;;

+	esac

+      fi

+      break

+    fi

+  done

+  IFS="$lt_save_ifs"

+  MAGIC_CMD="$lt_save_MAGIC_CMD"

+  ;;

+esac])

+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"

+if test -n "$MAGIC_CMD"; then

+  AC_MSG_RESULT($MAGIC_CMD)

+else

+  AC_MSG_RESULT(no)

+fi

+_LT_DECL([], [MAGIC_CMD], [0],

+	 [Used to examine libraries when file_magic_cmd begins with "file"])dnl

+])# _LT_PATH_TOOL_PREFIX

+

+# Old name:

+AU_ALIAS([AC_PATH_TOOL_PREFIX], [_LT_PATH_TOOL_PREFIX])

+dnl aclocal-1.4 backwards compatibility:

+dnl AC_DEFUN([AC_PATH_TOOL_PREFIX], [])

+

+

+# _LT_PATH_MAGIC

+# --------------

+# find a file program which can recognize a shared library

+m4_defun([_LT_PATH_MAGIC],

+[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)

+if test -z "$lt_cv_path_MAGIC_CMD"; then

+  if test -n "$ac_tool_prefix"; then

+    _LT_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH)

+  else

+    MAGIC_CMD=:

+  fi

+fi

+])# _LT_PATH_MAGIC

+

+

+# LT_PATH_LD

+# ----------

+# find the pathname to the GNU or non-GNU linker

+AC_DEFUN([LT_PATH_LD],

+[AC_REQUIRE([AC_PROG_CC])dnl

+AC_REQUIRE([AC_CANONICAL_HOST])dnl

+AC_REQUIRE([AC_CANONICAL_BUILD])dnl

+m4_require([_LT_DECL_SED])dnl

+m4_require([_LT_DECL_EGREP])dnl

+

+AC_ARG_WITH([gnu-ld],

+    [AS_HELP_STRING([--with-gnu-ld],

+	[assume the C compiler uses GNU ld @<:@default=no@:>@])],

+    [test "$withval" = no || with_gnu_ld=yes],

+    [with_gnu_ld=no])dnl

+

+ac_prog=ld

+if test "$GCC" = yes; then

+  # Check if gcc -print-prog-name=ld gives a path.

+  AC_MSG_CHECKING([for ld used by $CC])

+  case $host in

+  *-*-mingw*)

+    # gcc leaves a trailing carriage return which upsets mingw

+    ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;

+  *)

+    ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;

+  esac

+  case $ac_prog in

+    # Accept absolute paths.

+    [[\\/]]* | ?:[[\\/]]*)

+      re_direlt='/[[^/]][[^/]]*/\.\./'

+      # Canonicalize the pathname of ld

+      ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'`

+      while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do

+	ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`

+      done

+      test -z "$LD" && LD="$ac_prog"

+      ;;

+  "")

+    # If it fails, then pretend we aren't using GCC.

+    ac_prog=ld

+    ;;

+  *)

+    # If it is relative, then search for the first ld in PATH.

+    with_gnu_ld=unknown

+    ;;

+  esac

+elif test "$with_gnu_ld" = yes; then

+  AC_MSG_CHECKING([for GNU ld])

+else

+  AC_MSG_CHECKING([for non-GNU ld])

+fi

+AC_CACHE_VAL(lt_cv_path_LD,

+[if test -z "$LD"; then

+  lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR

+  for ac_dir in $PATH; do

+    IFS="$lt_save_ifs"

+    test -z "$ac_dir" && ac_dir=.

+    if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then

+      lt_cv_path_LD="$ac_dir/$ac_prog"

+      # Check to see if the program is GNU ld.  I'd rather use --version,

+      # but apparently some variants of GNU ld only accept -v.

+      # Break only if it was the GNU/non-GNU ld that we prefer.

+      case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in

+      *GNU* | *'with BFD'*)

+	test "$with_gnu_ld" != no && break

+	;;

+      *)

+	test "$with_gnu_ld" != yes && break

+	;;

+      esac

+    fi

+  done

+  IFS="$lt_save_ifs"

+else

+  lt_cv_path_LD="$LD" # Let the user override the test with a path.

+fi])

+LD="$lt_cv_path_LD"

+if test -n "$LD"; then

+  AC_MSG_RESULT($LD)

+else

+  AC_MSG_RESULT(no)

+fi

+test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])

+_LT_PATH_LD_GNU

+AC_SUBST([LD])

+

+_LT_TAGDECL([], [LD], [1], [The linker used to build libraries])

+])# LT_PATH_LD

+

+# Old names:

+AU_ALIAS([AM_PROG_LD], [LT_PATH_LD])

+AU_ALIAS([AC_PROG_LD], [LT_PATH_LD])

+dnl aclocal-1.4 backwards compatibility:

+dnl AC_DEFUN([AM_PROG_LD], [])

+dnl AC_DEFUN([AC_PROG_LD], [])

+

+

+# _LT_PATH_LD_GNU

+#- --------------

+m4_defun([_LT_PATH_LD_GNU],

+[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld,

+[# I'd rather use --version here, but apparently some GNU lds only accept -v.

+case `$LD -v 2>&1 </dev/null` in

+*GNU* | *'with BFD'*)

+  lt_cv_prog_gnu_ld=yes

+  ;;

+*)

+  lt_cv_prog_gnu_ld=no

+  ;;

+esac])

+with_gnu_ld=$lt_cv_prog_gnu_ld

+])# _LT_PATH_LD_GNU

+

+

+# _LT_CMD_RELOAD

+# --------------

+# find reload flag for linker

+#   -- PORTME Some linkers may need a different reload flag.

+m4_defun([_LT_CMD_RELOAD],

+[AC_CACHE_CHECK([for $LD option to reload object files],

+  lt_cv_ld_reload_flag,

+  [lt_cv_ld_reload_flag='-r'])

+reload_flag=$lt_cv_ld_reload_flag

+case $reload_flag in

+"" | " "*) ;;

+*) reload_flag=" $reload_flag" ;;

+esac

+reload_cmds='$LD$reload_flag -o $output$reload_objs'

+case $host_os in

+  darwin*)

+    if test "$GCC" = yes; then

+      reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'

+    else

+      reload_cmds='$LD$reload_flag -o $output$reload_objs'

+    fi

+    ;;

+esac

+_LT_DECL([], [reload_flag], [1], [How to create reloadable object files])dnl

+_LT_DECL([], [reload_cmds], [2])dnl

+])# _LT_CMD_RELOAD

+

+

+# _LT_CHECK_MAGIC_METHOD

+# ----------------------

+# how to check for library dependencies

+#  -- PORTME fill in with the dynamic library characteristics

+m4_defun([_LT_CHECK_MAGIC_METHOD],

+[m4_require([_LT_DECL_EGREP])

+m4_require([_LT_DECL_OBJDUMP])

+AC_CACHE_CHECK([how to recognize dependent libraries],

+lt_cv_deplibs_check_method,

+[lt_cv_file_magic_cmd='$MAGIC_CMD'

+lt_cv_file_magic_test_file=

+lt_cv_deplibs_check_method='unknown'

+# Need to set the preceding variable on all platforms that support

+# interlibrary dependencies.

+# 'none' -- dependencies not supported.

+# `unknown' -- same as none, but documents that we really don't know.

+# 'pass_all' -- all dependencies passed with no checks.

+# 'test_compile' -- check by making test program.

+# 'file_magic [[regex]]' -- check by looking for files in library path

+# which responds to the $file_magic_cmd with a given extended regex.

+# If you have `file' or equivalent on your system and you're not sure

+# whether `pass_all' will *always* work, you probably want this one.

+

+case $host_os in

+aix[[4-9]]*)

+  lt_cv_deplibs_check_method=pass_all

+  ;;

+

+beos*)

+  lt_cv_deplibs_check_method=pass_all

+  ;;

+

+bsdi[[45]]*)

+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib)'

+  lt_cv_file_magic_cmd='/usr/bin/file -L'

+  lt_cv_file_magic_test_file=/shlib/libc.so

+  ;;

+

+cygwin*)

+  # func_win32_libid is a shell function defined in ltmain.sh

+  lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'

+  lt_cv_file_magic_cmd='func_win32_libid'

+  ;;

+

+mingw* | pw32*)

+  # Base MSYS/MinGW do not provide the 'file' command needed by

+  # func_win32_libid shell function, so use a weaker test based on 'objdump',

+  # unless we find 'file', for example because we are cross-compiling.

+  if ( file / ) >/dev/null 2>&1; then

+    lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'

+    lt_cv_file_magic_cmd='func_win32_libid'

+  else

+    lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'

+    lt_cv_file_magic_cmd='$OBJDUMP -f'

+  fi

+  ;;

+

+cegcc)

+  # use the weaker test based on 'objdump'. See mingw*.

+  lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?'

+  lt_cv_file_magic_cmd='$OBJDUMP -f'

+  ;;

+

+darwin* | rhapsody*)

+  lt_cv_deplibs_check_method=pass_all

+  ;;

+

+freebsd* | dragonfly*)

+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then

+    case $host_cpu in

+    i*86 )

+      # Not sure whether the presence of OpenBSD here was a mistake.

+      # Let's accept both of them until this is cleared up.

+      lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library'

+      lt_cv_file_magic_cmd=/usr/bin/file

+      lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`

+      ;;

+    esac

+  else

+    lt_cv_deplibs_check_method=pass_all

+  fi

+  ;;

+

+gnu*)

+  lt_cv_deplibs_check_method=pass_all

+  ;;

+

+hpux10.20* | hpux11*)

+  lt_cv_file_magic_cmd=/usr/bin/file

+  case $host_cpu in

+  ia64*)

+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64'

+    lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so

+    ;;

+  hppa*64*)

+    [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]']

+    lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl

+    ;;

+  *)

+    lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library'

+    lt_cv_file_magic_test_file=/usr/lib/libc.sl

+    ;;

+  esac

+  ;;

+

+interix[[3-9]]*)

+  # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here

+  lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$'

+  ;;

+

+irix5* | irix6* | nonstopux*)

+  case $LD in

+  *-32|*"-32 ") libmagic=32-bit;;

+  *-n32|*"-n32 ") libmagic=N32;;

+  *-64|*"-64 ") libmagic=64-bit;;

+  *) libmagic=never-match;;

+  esac

+  lt_cv_deplibs_check_method=pass_all

+  ;;

+

+# This must be Linux ELF.

+linux* | k*bsd*-gnu | kopensolaris*-gnu)

+  lt_cv_deplibs_check_method=pass_all

+  ;;

+

+netbsd* | netbsdelf*-gnu)

+  if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then

+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'

+  else

+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$'

+  fi

+  ;;

+

+newos6*)

+  lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)'

+  lt_cv_file_magic_cmd=/usr/bin/file

+  lt_cv_file_magic_test_file=/usr/lib/libnls.so

+  ;;

+

+*nto* | *qnx*)

+  lt_cv_deplibs_check_method=pass_all

+  ;;

+

+openbsd*)

+  if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then

+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'

+  else

+    lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'

+  fi

+  ;;

+

+osf3* | osf4* | osf5*)

+  lt_cv_deplibs_check_method=pass_all

+  ;;

+

+rdos*)

+  lt_cv_deplibs_check_method=pass_all

+  ;;

+

+solaris*)

+  lt_cv_deplibs_check_method=pass_all

+  ;;

+

+sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)

+  lt_cv_deplibs_check_method=pass_all

+  ;;

+

+sysv4 | sysv4.3*)

+  case $host_vendor in

+  motorola)

+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]'

+    lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`

+    ;;

+  ncr)

+    lt_cv_deplibs_check_method=pass_all

+    ;;

+  sequent)

+    lt_cv_file_magic_cmd='/bin/file'

+    lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )'

+    ;;

+  sni)

+    lt_cv_file_magic_cmd='/bin/file'

+    lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib"

+    lt_cv_file_magic_test_file=/lib/libc.so

+    ;;

+  siemens)

+    lt_cv_deplibs_check_method=pass_all

+    ;;

+  pc)

+    lt_cv_deplibs_check_method=pass_all

+    ;;

+  esac

+  ;;

+

+tpf*)

+  lt_cv_deplibs_check_method=pass_all

+  ;;

+esac

+])

+file_magic_cmd=$lt_cv_file_magic_cmd

+deplibs_check_method=$lt_cv_deplibs_check_method

+test -z "$deplibs_check_method" && deplibs_check_method=unknown

+

+_LT_DECL([], [deplibs_check_method], [1],

+    [Method to check whether dependent libraries are shared objects])

+_LT_DECL([], [file_magic_cmd], [1],

+    [Command to use when deplibs_check_method == "file_magic"])

+])# _LT_CHECK_MAGIC_METHOD

+

+

+# LT_PATH_NM

+# ----------

+# find the pathname to a BSD- or MS-compatible name lister

+AC_DEFUN([LT_PATH_NM],

+[AC_REQUIRE([AC_PROG_CC])dnl

+AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,

+[if test -n "$NM"; then

+  # Let the user override the test.

+  lt_cv_path_NM="$NM"

+else

+  lt_nm_to_check="${ac_tool_prefix}nm"

+  if test -n "$ac_tool_prefix" && test "$build" = "$host"; then

+    lt_nm_to_check="$lt_nm_to_check nm"

+  fi

+  for lt_tmp_nm in $lt_nm_to_check; do

+    lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR

+    for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do

+      IFS="$lt_save_ifs"

+      test -z "$ac_dir" && ac_dir=.

+      tmp_nm="$ac_dir/$lt_tmp_nm"

+      if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then

+	# Check to see if the nm accepts a BSD-compat flag.

+	# Adding the `sed 1q' prevents false positives on HP-UX, which says:

+	#   nm: unknown option "B" ignored

+	# Tru64's nm complains that /dev/null is an invalid object file

+	case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in

+	*/dev/null* | *'Invalid file or object type'*)

+	  lt_cv_path_NM="$tmp_nm -B"

+	  break

+	  ;;

+	*)

+	  case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in

+	  */dev/null*)

+	    lt_cv_path_NM="$tmp_nm -p"

+	    break

+	    ;;

+	  *)

+	    lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but

+	    continue # so that we can try to find one that supports BSD flags

+	    ;;

+	  esac

+	  ;;

+	esac

+      fi

+    done

+    IFS="$lt_save_ifs"

+  done

+  : ${lt_cv_path_NM=no}

+fi])

+if test "$lt_cv_path_NM" != "no"; then

+  NM="$lt_cv_path_NM"

+else

+  # Didn't find any BSD compatible name lister, look for dumpbin.

+  AC_CHECK_TOOLS(DUMPBIN, ["dumpbin -symbols" "link -dump -symbols"], :)

+  AC_SUBST([DUMPBIN])

+  if test "$DUMPBIN" != ":"; then

+    NM="$DUMPBIN"

+  fi

+fi

+test -z "$NM" && NM=nm

+AC_SUBST([NM])

+_LT_DECL([], [NM], [1], [A BSD- or MS-compatible name lister])dnl

+

+AC_CACHE_CHECK([the name lister ($NM) interface], [lt_cv_nm_interface],

+  [lt_cv_nm_interface="BSD nm"

+  echo "int some_variable = 0;" > conftest.$ac_ext

+  (eval echo "\"\$as_me:__oline__: $ac_compile\"" >&AS_MESSAGE_LOG_FD)

+  (eval "$ac_compile" 2>conftest.err)

+  cat conftest.err >&AS_MESSAGE_LOG_FD

+  (eval echo "\"\$as_me:__oline__: $NM \\\"conftest.$ac_objext\\\"\"" >&AS_MESSAGE_LOG_FD)

+  (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out)

+  cat conftest.err >&AS_MESSAGE_LOG_FD

+  (eval echo "\"\$as_me:__oline__: output\"" >&AS_MESSAGE_LOG_FD)

+  cat conftest.out >&AS_MESSAGE_LOG_FD

+  if $GREP 'External.*some_variable' conftest.out > /dev/null; then

+    lt_cv_nm_interface="MS dumpbin"

+  fi

+  rm -f conftest*])

+])# LT_PATH_NM

+

+# Old names:

+AU_ALIAS([AM_PROG_NM], [LT_PATH_NM])

+AU_ALIAS([AC_PROG_NM], [LT_PATH_NM])

+dnl aclocal-1.4 backwards compatibility:

+dnl AC_DEFUN([AM_PROG_NM], [])

+dnl AC_DEFUN([AC_PROG_NM], [])

+

+

+# LT_LIB_M

+# --------

+# check for math library

+AC_DEFUN([LT_LIB_M],

+[AC_REQUIRE([AC_CANONICAL_HOST])dnl

+LIBM=

+case $host in

+*-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*)

+  # These system don't have libm, or don't need it

+  ;;

+*-ncr-sysv4.3*)

+  AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")

+  AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")

+  ;;

+*)

+  AC_CHECK_LIB(m, cos, LIBM="-lm")

+  ;;

+esac

+AC_SUBST([LIBM])

+])# LT_LIB_M

+

+# Old name:

+AU_ALIAS([AC_CHECK_LIBM], [LT_LIB_M])

+dnl aclocal-1.4 backwards compatibility:

+dnl AC_DEFUN([AC_CHECK_LIBM], [])

+

+

+# _LT_COMPILER_NO_RTTI([TAGNAME])

+# -------------------------------

+m4_defun([_LT_COMPILER_NO_RTTI],

+[m4_require([_LT_TAG_COMPILER])dnl

+

+_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=

+

+if test "$GCC" = yes; then

+  _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'

+

+  _LT_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions],

+    lt_cv_prog_compiler_rtti_exceptions,

+    [-fno-rtti -fno-exceptions], [],

+    [_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"])

+fi

+_LT_TAGDECL([no_builtin_flag], [lt_prog_compiler_no_builtin_flag], [1],

+	[Compiler flag to turn off builtin functions])

+])# _LT_COMPILER_NO_RTTI

+

+

+# _LT_CMD_GLOBAL_SYMBOLS

+# ----------------------

+m4_defun([_LT_CMD_GLOBAL_SYMBOLS],

+[AC_REQUIRE([AC_CANONICAL_HOST])dnl

+AC_REQUIRE([AC_PROG_CC])dnl

+AC_REQUIRE([LT_PATH_NM])dnl

+AC_REQUIRE([LT_PATH_LD])dnl

+m4_require([_LT_DECL_SED])dnl

+m4_require([_LT_DECL_EGREP])dnl

+m4_require([_LT_TAG_COMPILER])dnl

+

+# Check for command to grab the raw symbol name followed by C symbol from nm.

+AC_MSG_CHECKING([command to parse $NM output from $compiler object])

+AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe],

+[

+# These are sane defaults that work on at least a few old systems.

+# [They come from Ultrix.  What could be older than Ultrix?!! ;)]

+

+# Character class describing NM global symbol codes.

+symcode='[[BCDEGRST]]'

+

+# Regexp to match symbols that can be accessed directly from C.

+sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)'

+

+# Define system-specific variables.

+case $host_os in

+aix*)

+  symcode='[[BCDT]]'

+  ;;

+cygwin* | mingw* | pw32* | cegcc*)

+  symcode='[[ABCDGISTW]]'

+  ;;

+hpux*)

+  if test "$host_cpu" = ia64; then

+    symcode='[[ABCDEGRST]]'

+  fi

+  ;;

+irix* | nonstopux*)

+  symcode='[[BCDEGRST]]'

+  ;;

+osf*)

+  symcode='[[BCDEGQRST]]'

+  ;;

+solaris*)

+  symcode='[[BDRT]]'

+  ;;

+sco3.2v5*)

+  symcode='[[DT]]'

+  ;;

+sysv4.2uw2*)

+  symcode='[[DT]]'

+  ;;

+sysv5* | sco5v6* | unixware* | OpenUNIX*)

+  symcode='[[ABDT]]'

+  ;;

+sysv4)

+  symcode='[[DFNSTU]]'

+  ;;

+esac

+

+# If we're using GNU nm, then use its standard symbol codes.

+case `$NM -V 2>&1` in

+*GNU* | *'with BFD'*)

+  symcode='[[ABCDGIRSTW]]' ;;

+esac

+

+# Transform an extracted symbol line into a proper C declaration.

+# Some systems (esp. on ia64) link data and code symbols differently,

+# so use this general approach.

+lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"

+

+# Transform an extracted symbol line into symbol name and symbol address

+lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p'"

+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/  {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"lib\2\", (void *) \&\2},/p'"

+

+# Handle CRLF in mingw tool chain

+opt_cr=

+case $build_os in

+mingw*)

+  opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp

+  ;;

+esac

+

+# Try without a prefix underscore, then with it.

+for ac_symprfx in "" "_"; do

+

+  # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol.

+  symxfrm="\\1 $ac_symprfx\\2 \\2"

+

+  # Write the raw and C identifiers.

+  if test "$lt_cv_nm_interface" = "MS dumpbin"; then

+    # Fake it for dumpbin and say T for any non-static function

+    # and D for any global variable.

+    # Also find C++ and __fastcall symbols from MSVC++,

+    # which start with @ or ?.

+    lt_cv_sys_global_symbol_pipe="$AWK ['"\

+"     {last_section=section; section=\$ 3};"\

+"     /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\

+"     \$ 0!~/External *\|/{next};"\

+"     / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\

+"     {if(hide[section]) next};"\

+"     {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\

+"     {split(\$ 0, a, /\||\r/); split(a[2], s)};"\

+"     s[1]~/^[@?]/{print s[1], s[1]; next};"\

+"     s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\

+"     ' prfx=^$ac_symprfx]"

+  else

+    lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[	 ]]\($symcode$symcode*\)[[	 ]][[	 ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"

+  fi

+

+  # Check to see that the pipe works correctly.

+  pipe_works=no

+

+  rm -f conftest*

+  cat > conftest.$ac_ext <<_LT_EOF

+#ifdef __cplusplus

+extern "C" {

+#endif

+char nm_test_var;

+void nm_test_func(void);

+void nm_test_func(void){}

+#ifdef __cplusplus

+}

+#endif

+int main(){nm_test_var='a';nm_test_func();return(0);}

+_LT_EOF

+

+  if AC_TRY_EVAL(ac_compile); then

+    # Now try to grab the symbols.

+    nlist=conftest.nm

+    if AC_TRY_EVAL(NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) && test -s "$nlist"; then

+      # Try sorting and uniquifying the output.

+      if sort "$nlist" | uniq > "$nlist"T; then

+	mv -f "$nlist"T "$nlist"

+      else

+	rm -f "$nlist"T

+      fi

+

+      # Make sure that we snagged all the symbols we need.

+      if $GREP ' nm_test_var$' "$nlist" >/dev/null; then

+	if $GREP ' nm_test_func$' "$nlist" >/dev/null; then

+	  cat <<_LT_EOF > conftest.$ac_ext

+#ifdef __cplusplus

+extern "C" {

+#endif

+

+_LT_EOF

+	  # Now generate the symbol file.

+	  eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext'

+

+	  cat <<_LT_EOF >> conftest.$ac_ext

+

+/* The mapping between symbol names and symbols.  */

+const struct {

+  const char *name;

+  void       *address;

+}

+lt__PROGRAM__LTX_preloaded_symbols[[]] =

+{

+  { "@PROGRAM@", (void *) 0 },

+_LT_EOF

+	  $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/  {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext

+	  cat <<\_LT_EOF >> conftest.$ac_ext

+  {0, (void *) 0}

+};

+

+/* This works around a problem in FreeBSD linker */

+#ifdef FREEBSD_WORKAROUND

+static const void *lt_preloaded_setup() {

+  return lt__PROGRAM__LTX_preloaded_symbols;

+}

+#endif

+

+#ifdef __cplusplus

+}

+#endif

+_LT_EOF

+	  # Now try linking the two files.

+	  mv conftest.$ac_objext conftstm.$ac_objext

+	  lt_save_LIBS="$LIBS"

+	  lt_save_CFLAGS="$CFLAGS"

+	  LIBS="conftstm.$ac_objext"

+	  CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"

+	  if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then

+	    pipe_works=yes

+	  fi

+	  LIBS="$lt_save_LIBS"

+	  CFLAGS="$lt_save_CFLAGS"

+	else

+	  echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD

+	fi

+      else

+	echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD

+      fi

+    else

+      echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD

+    fi

+  else

+    echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD

+    cat conftest.$ac_ext >&5

+  fi

+  rm -rf conftest* conftst*

+

+  # Do not use the global_symbol_pipe unless it works.

+  if test "$pipe_works" = yes; then

+    break

+  else

+    lt_cv_sys_global_symbol_pipe=

+  fi

+done

+])

+if test -z "$lt_cv_sys_global_symbol_pipe"; then

+  lt_cv_sys_global_symbol_to_cdecl=

+fi

+if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then

+  AC_MSG_RESULT(failed)

+else

+  AC_MSG_RESULT(ok)

+fi

+

+_LT_DECL([global_symbol_pipe], [lt_cv_sys_global_symbol_pipe], [1],

+    [Take the output of nm and produce a listing of raw symbols and C names])

+_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],

+    [Transform the output of nm in a proper C declaration])

+_LT_DECL([global_symbol_to_c_name_address],

+    [lt_cv_sys_global_symbol_to_c_name_address], [1],

+    [Transform the output of nm in a C name address pair])

+_LT_DECL([global_symbol_to_c_name_address_lib_prefix],

+    [lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],

+    [Transform the output of nm in a C name address pair when lib prefix is needed])

+]) # _LT_CMD_GLOBAL_SYMBOLS

+

+

+# _LT_COMPILER_PIC([TAGNAME])

+# ---------------------------

+m4_defun([_LT_COMPILER_PIC],

+[m4_require([_LT_TAG_COMPILER])dnl

+_LT_TAGVAR(lt_prog_compiler_wl, $1)=

+_LT_TAGVAR(lt_prog_compiler_pic, $1)=

+_LT_TAGVAR(lt_prog_compiler_static, $1)=

+

+AC_MSG_CHECKING([for $compiler option to produce PIC])

+m4_if([$1], [CXX], [

+  # C++ specific cases for pic, static, wl, etc.

+  if test "$GXX" = yes; then

+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'

+

+    case $host_os in

+    aix*)

+      # All AIX code is PIC.

+      if test "$host_cpu" = ia64; then

+	# AIX 5 now supports IA64 processor

+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

+      fi

+      ;;

+

+    amigaos*)

+      case $host_cpu in

+      powerpc)

+            # see comment about AmigaOS4 .so support

+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'

+        ;;

+      m68k)

+            # FIXME: we need at least 68020 code to build shared libraries, but

+            # adding the `-m68020' flag to GCC prevents building anything better,

+            # like `-m68040'.

+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'

+        ;;

+      esac

+      ;;

+

+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)

+      # PIC is the default for these OSes.

+      ;;

+    mingw* | cygwin* | os2* | pw32* | cegcc*)

+      # This hack is so that the source file can tell whether it is being

+      # built for inclusion in a dll (and should export symbols for example).

+      # Although the cygwin gcc ignores -fPIC, still need this for old-style

+      # (--disable-auto-import) libraries

+      m4_if([$1], [GCJ], [],

+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])

+      ;;

+    darwin* | rhapsody*)

+      # PIC is the default on this platform

+      # Common symbols not allowed in MH_DYLIB files

+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'

+      ;;

+    *djgpp*)

+      # DJGPP does not support shared libraries at all

+      _LT_TAGVAR(lt_prog_compiler_pic, $1)=

+      ;;

+    interix[[3-9]]*)

+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.

+      # Instead, we relocate shared libraries at runtime.

+      ;;

+    sysv4*MP*)

+      if test -d /usr/nec; then

+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic

+      fi

+      ;;

+    hpux*)

+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit

+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag

+      # sets the default TLS model and affects inlining.

+      case $host_cpu in

+      hppa*64*)

+	;;

+      *)

+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'

+	;;

+      esac

+      ;;

+    *qnx* | *nto*)

+      # QNX uses GNU C++, but need to define -shared option too, otherwise

+      # it will coredump.

+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'

+      ;;

+    *)

+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'

+      ;;

+    esac

+  else

+    case $host_os in

+      aix[[4-9]]*)

+	# All AIX code is PIC.

+	if test "$host_cpu" = ia64; then

+	  # AIX 5 now supports IA64 processor

+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

+	else

+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'

+	fi

+	;;

+      chorus*)

+	case $cc_basename in

+	cxch68*)

+	  # Green Hills C++ Compiler

+	  # _LT_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"

+	  ;;

+	esac

+	;;

+      dgux*)

+	case $cc_basename in

+	  ec++*)

+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

+	    ;;

+	  ghcx*)

+	    # Green Hills C++ Compiler

+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'

+	    ;;

+	  *)

+	    ;;

+	esac

+	;;

+      freebsd* | dragonfly*)

+	# FreeBSD uses GNU C++

+	;;

+      hpux9* | hpux10* | hpux11*)

+	case $cc_basename in

+	  CC*)

+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'

+	    if test "$host_cpu" != ia64; then

+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'

+	    fi

+	    ;;

+	  aCC*)

+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'

+	    case $host_cpu in

+	    hppa*64*|ia64*)

+	      # +Z the default

+	      ;;

+	    *)

+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'

+	      ;;

+	    esac

+	    ;;

+	  *)

+	    ;;

+	esac

+	;;

+      interix*)

+	# This is c89, which is MS Visual C++ (no shared libs)

+	# Anyone wants to do a port?

+	;;

+      irix5* | irix6* | nonstopux*)

+	case $cc_basename in

+	  CC*)

+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'

+	    # CC pic flag -KPIC is the default.

+	    ;;

+	  *)

+	    ;;

+	esac

+	;;

+      linux* | k*bsd*-gnu | kopensolaris*-gnu)

+	case $cc_basename in

+	  KCC*)

+	    # KAI C++ Compiler

+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'

+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'

+	    ;;

+	  ecpc* )

+	    # old Intel C++ for x86_64 which still supported -KPIC.

+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'

+	    ;;

+	  icpc* )

+	    # Intel C++, used to be incompatible with GCC.

+	    # ICC 10 doesn't accept -KPIC any more.

+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'

+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'

+	    ;;

+	  pgCC* | pgcpp*)

+	    # Portland Group C++ compiler

+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'

+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

+	    ;;

+	  cxx*)

+	    # Compaq C++

+	    # Make sure the PIC flag is empty.  It appears that all Alpha

+	    # Linux and Compaq Tru64 Unix objects are PIC.

+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=

+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'

+	    ;;

+	  xlc* | xlC*)

+	    # IBM XL 8.0 on PPC

+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'

+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'

+	    ;;

+	  *)

+	    case `$CC -V 2>&1 | sed 5q` in

+	    *Sun\ C*)

+	      # Sun C++ 5.9

+	      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

+	      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

+	      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '

+	      ;;

+	    esac

+	    ;;

+	esac

+	;;

+      lynxos*)

+	;;

+      m88k*)

+	;;

+      mvs*)

+	case $cc_basename in

+	  cxx*)

+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall'

+	    ;;

+	  *)

+	    ;;

+	esac

+	;;

+      netbsd* | netbsdelf*-gnu)

+	;;

+      *qnx* | *nto*)

+        # QNX uses GNU C++, but need to define -shared option too, otherwise

+        # it will coredump.

+        _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'

+        ;;

+      osf3* | osf4* | osf5*)

+	case $cc_basename in

+	  KCC*)

+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,'

+	    ;;

+	  RCC*)

+	    # Rational C++ 2.4.1

+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'

+	    ;;

+	  cxx*)

+	    # Digital/Compaq C++

+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+	    # Make sure the PIC flag is empty.  It appears that all Alpha

+	    # Linux and Compaq Tru64 Unix objects are PIC.

+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)=

+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'

+	    ;;

+	  *)

+	    ;;

+	esac

+	;;

+      psos*)

+	;;

+      solaris*)

+	case $cc_basename in

+	  CC*)

+	    # Sun C++ 4.2, 5.x and Centerline C++

+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '

+	    ;;

+	  gcx*)

+	    # Green Hills C++ Compiler

+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'

+	    ;;

+	  *)

+	    ;;

+	esac

+	;;

+      sunos4*)

+	case $cc_basename in

+	  CC*)

+	    # Sun C++ 4.x

+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'

+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

+	    ;;

+	  lcc*)

+	    # Lucid

+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'

+	    ;;

+	  *)

+	    ;;

+	esac

+	;;

+      sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)

+	case $cc_basename in

+	  CC*)

+	    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

+	    _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

+	    ;;

+	esac

+	;;

+      tandem*)

+	case $cc_basename in

+	  NCC*)

+	    # NonStop-UX NCC 3.20

+	    _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

+	    ;;

+	  *)

+	    ;;

+	esac

+	;;

+      vxworks*)

+	;;

+      *)

+	_LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no

+	;;

+    esac

+  fi

+],

+[

+  if test "$GCC" = yes; then

+    _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+    _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'

+

+    case $host_os in

+      aix*)

+      # All AIX code is PIC.

+      if test "$host_cpu" = ia64; then

+	# AIX 5 now supports IA64 processor

+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

+      fi

+      ;;

+

+    amigaos*)

+      case $host_cpu in

+      powerpc)

+            # see comment about AmigaOS4 .so support

+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'

+        ;;

+      m68k)

+            # FIXME: we need at least 68020 code to build shared libraries, but

+            # adding the `-m68020' flag to GCC prevents building anything better,

+            # like `-m68040'.

+            _LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'

+        ;;

+      esac

+      ;;

+

+    beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)

+      # PIC is the default for these OSes.

+      ;;

+

+    mingw* | cygwin* | pw32* | os2* | cegcc*)

+      # This hack is so that the source file can tell whether it is being

+      # built for inclusion in a dll (and should export symbols for example).

+      # Although the cygwin gcc ignores -fPIC, still need this for old-style

+      # (--disable-auto-import) libraries

+      m4_if([$1], [GCJ], [],

+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])

+      ;;

+

+    darwin* | rhapsody*)

+      # PIC is the default on this platform

+      # Common symbols not allowed in MH_DYLIB files

+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'

+      ;;

+

+    hpux*)

+      # PIC is the default for 64-bit PA HP-UX, but not for 32-bit

+      # PA HP-UX.  On IA64 HP-UX, PIC is the default but the pic flag

+      # sets the default TLS model and affects inlining.

+      case $host_cpu in

+      hppa*64*)

+	# +Z the default

+	;;

+      *)

+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'

+	;;

+      esac

+      ;;

+

+    interix[[3-9]]*)

+      # Interix 3.x gcc -fpic/-fPIC options generate broken code.

+      # Instead, we relocate shared libraries at runtime.

+      ;;

+

+    msdosdjgpp*)

+      # Just because we use GCC doesn't mean we suddenly get shared libraries

+      # on systems that don't support them.

+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no

+      enable_shared=no

+      ;;

+

+    *nto* | *qnx*)

+      # QNX uses GNU C++, but need to define -shared option too, otherwise

+      # it will coredump.

+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'

+      ;;

+

+    sysv4*MP*)

+      if test -d /usr/nec; then

+	_LT_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic

+      fi

+      ;;

+

+    *)

+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'

+      ;;

+    esac

+  else

+    # PORTME Check for flag to pass linker flags through the system compiler.

+    case $host_os in

+    aix*)

+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+      if test "$host_cpu" = ia64; then

+	# AIX 5 now supports IA64 processor

+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

+      else

+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp'

+      fi

+      ;;

+

+    mingw* | cygwin* | pw32* | os2* | cegcc*)

+      # This hack is so that the source file can tell whether it is being

+      # built for inclusion in a dll (and should export symbols for example).

+      m4_if([$1], [GCJ], [],

+	[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])

+      ;;

+

+    hpux9* | hpux10* | hpux11*)

+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+      # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but

+      # not for PA HP-UX.

+      case $host_cpu in

+      hppa*64*|ia64*)

+	# +Z the default

+	;;

+      *)

+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'

+	;;

+      esac

+      # Is there a better lt_prog_compiler_static that works with the bundled CC?

+      _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'

+      ;;

+

+    irix5* | irix6* | nonstopux*)

+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+      # PIC (with -KPIC) is the default.

+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'

+      ;;

+

+    linux* | k*bsd*-gnu | kopensolaris*-gnu)

+      case $cc_basename in

+      # old Intel for x86_64 which still supported -KPIC.

+      ecc*)

+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'

+        ;;

+      # icc used to be incompatible with GCC.

+      # ICC 10 doesn't accept -KPIC any more.

+      icc* | ifort*)

+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'

+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'

+        ;;

+      # Lahey Fortran 8.1.

+      lf95*)

+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='--shared'

+	_LT_TAGVAR(lt_prog_compiler_static, $1)='--static'

+	;;

+      pgcc* | pgf77* | pgf90* | pgf95*)

+        # Portland Group compilers (*not* the Pentium gcc compiler,

+	# which looks to be a dead project)

+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fpic'

+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

+        ;;

+      ccc*)

+        _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+        # All Alpha code is PIC.

+        _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'

+        ;;

+      xl*)

+	# IBM XL C 8.0/Fortran 10.1 on PPC

+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-qpic'

+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-qstaticlink'

+	;;

+      *)

+	case `$CC -V 2>&1 | sed 5q` in

+	*Sun\ C*)

+	  # Sun C 5.9

+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+	  ;;

+	*Sun\ F*)

+	  # Sun Fortran 8.3 passes all unrecognized flags to the linker

+	  _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

+	  _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

+	  _LT_TAGVAR(lt_prog_compiler_wl, $1)=''

+	  ;;

+	esac

+	;;

+      esac

+      ;;

+

+    newsos6)

+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

+      ;;

+

+    *nto* | *qnx*)

+      # QNX uses GNU C++, but need to define -shared option too, otherwise

+      # it will coredump.

+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC -shared'

+      ;;

+

+    osf3* | osf4* | osf5*)

+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+      # All OSF/1 code is PIC.

+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'

+      ;;

+

+    rdos*)

+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'

+      ;;

+

+    solaris*)

+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

+      case $cc_basename in

+      f77* | f90* | f95*)

+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';;

+      *)

+	_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';;

+      esac

+      ;;

+

+    sunos4*)

+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld '

+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'

+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

+      ;;

+

+    sysv4 | sysv4.2uw2* | sysv4.3*)

+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

+      ;;

+

+    sysv4*MP*)

+      if test -d /usr/nec ;then

+	_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'

+	_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

+      fi

+      ;;

+

+    sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*)

+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'

+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

+      ;;

+

+    unicos*)

+      _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'

+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no

+      ;;

+

+    uts4*)

+      _LT_TAGVAR(lt_prog_compiler_pic, $1)='-pic'

+      _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'

+      ;;

+

+    *)

+      _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no

+      ;;

+    esac

+  fi

+])

+case $host_os in

+  # For platforms which do not support PIC, -DPIC is meaningless:

+  *djgpp*)

+    _LT_TAGVAR(lt_prog_compiler_pic, $1)=

+    ;;

+  *)

+    _LT_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])"

+    ;;

+esac

+AC_MSG_RESULT([$_LT_TAGVAR(lt_prog_compiler_pic, $1)])

+_LT_TAGDECL([wl], [lt_prog_compiler_wl], [1],

+	[How to pass a linker flag through the compiler])

+

+#

+# Check to make sure the PIC flag actually works.

+#

+if test -n "$_LT_TAGVAR(lt_prog_compiler_pic, $1)"; then

+  _LT_COMPILER_OPTION([if $compiler PIC flag $_LT_TAGVAR(lt_prog_compiler_pic, $1) works],

+    [_LT_TAGVAR(lt_cv_prog_compiler_pic_works, $1)],

+    [$_LT_TAGVAR(lt_prog_compiler_pic, $1)@&t@m4_if([$1],[],[ -DPIC],[m4_if([$1],[CXX],[ -DPIC],[])])], [],

+    [case $_LT_TAGVAR(lt_prog_compiler_pic, $1) in

+     "" | " "*) ;;

+     *) _LT_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_TAGVAR(lt_prog_compiler_pic, $1)" ;;

+     esac],

+    [_LT_TAGVAR(lt_prog_compiler_pic, $1)=

+     _LT_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no])

+fi

+_LT_TAGDECL([pic_flag], [lt_prog_compiler_pic], [1],

+	[Additional compiler flags for building library objects])

+

+#

+# Check to make sure the static flag actually works.

+#

+wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_TAGVAR(lt_prog_compiler_static, $1)\"

+_LT_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works],

+  _LT_TAGVAR(lt_cv_prog_compiler_static_works, $1),

+  $lt_tmp_static_flag,

+  [],

+  [_LT_TAGVAR(lt_prog_compiler_static, $1)=])

+_LT_TAGDECL([link_static_flag], [lt_prog_compiler_static], [1],

+	[Compiler flag to prevent dynamic linking])

+])# _LT_COMPILER_PIC

+

+

+# _LT_LINKER_SHLIBS([TAGNAME])

+# ----------------------------

+# See if the linker supports building shared libraries.

+m4_defun([_LT_LINKER_SHLIBS],

+[AC_REQUIRE([LT_PATH_LD])dnl

+AC_REQUIRE([LT_PATH_NM])dnl

+m4_require([_LT_FILEUTILS_DEFAULTS])dnl

+m4_require([_LT_DECL_EGREP])dnl

+m4_require([_LT_DECL_SED])dnl

+m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl

+m4_require([_LT_TAG_COMPILER])dnl

+AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])

+m4_if([$1], [CXX], [

+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'

+  case $host_os in

+  aix[[4-9]]*)

+    # If we're using GNU nm, then we don't want the "-C" option.

+    # -C means demangle to AIX nm, but means don't demangle with GNU nm

+    if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then

+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'

+    else

+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'

+    fi

+    ;;

+  pw32*)

+    _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"

+  ;;

+  cygwin* | mingw* | cegcc*)

+    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.* //'\'' | sort | uniq > $export_symbols'

+  ;;

+  linux* | k*bsd*-gnu)

+    _LT_TAGVAR(link_all_deplibs, $1)=no

+  ;;

+  *)

+    _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'

+  ;;

+  esac

+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']

+], [

+  runpath_var=

+  _LT_TAGVAR(allow_undefined_flag, $1)=

+  _LT_TAGVAR(always_export_symbols, $1)=no

+  _LT_TAGVAR(archive_cmds, $1)=

+  _LT_TAGVAR(archive_expsym_cmds, $1)=

+  _LT_TAGVAR(compiler_needs_object, $1)=no

+  _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no

+  _LT_TAGVAR(export_dynamic_flag_spec, $1)=

+  _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'

+  _LT_TAGVAR(hardcode_automatic, $1)=no

+  _LT_TAGVAR(hardcode_direct, $1)=no

+  _LT_TAGVAR(hardcode_direct_absolute, $1)=no

+  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=

+  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=

+  _LT_TAGVAR(hardcode_libdir_separator, $1)=

+  _LT_TAGVAR(hardcode_minus_L, $1)=no

+  _LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported

+  _LT_TAGVAR(inherit_rpath, $1)=no

+  _LT_TAGVAR(link_all_deplibs, $1)=unknown

+  _LT_TAGVAR(module_cmds, $1)=

+  _LT_TAGVAR(module_expsym_cmds, $1)=

+  _LT_TAGVAR(old_archive_from_new_cmds, $1)=

+  _LT_TAGVAR(old_archive_from_expsyms_cmds, $1)=

+  _LT_TAGVAR(thread_safe_flag_spec, $1)=

+  _LT_TAGVAR(whole_archive_flag_spec, $1)=

+  # include_expsyms should be a list of space-separated symbols to be *always*

+  # included in the symbol list

+  _LT_TAGVAR(include_expsyms, $1)=

+  # exclude_expsyms can be an extended regexp of symbols to exclude

+  # it will be wrapped by ` (' and `)$', so one must not match beginning or

+  # end of line.  Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',

+  # as well as any symbol that contains `d'.

+  _LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']

+  # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out

+  # platforms (ab)use it in PIC code, but their linkers get confused if

+  # the symbol is explicitly referenced.  Since portable code cannot

+  # rely on this symbol name, it's probably fine to never include it in

+  # preloaded symbol tables.

+  # Exclude shared library initialization/finalization symbols.

+dnl Note also adjust exclude_expsyms for C++ above.

+  extract_expsyms_cmds=

+

+  case $host_os in

+  cygwin* | mingw* | pw32* | cegcc*)

+    # FIXME: the MSVC++ port hasn't been tested in a loooong time

+    # When not using gcc, we currently assume that we are using

+    # Microsoft Visual C++.

+    if test "$GCC" != yes; then

+      with_gnu_ld=no

+    fi

+    ;;

+  interix*)

+    # we just hope/assume this is gcc and not c89 (= MSVC++)

+    with_gnu_ld=yes

+    ;;

+  openbsd*)

+    with_gnu_ld=no

+    ;;

+  linux* | k*bsd*-gnu)

+    _LT_TAGVAR(link_all_deplibs, $1)=no

+    ;;

+  esac

+

+  _LT_TAGVAR(ld_shlibs, $1)=yes

+  if test "$with_gnu_ld" = yes; then

+    # If archive_cmds runs LD, not CC, wlarc should be empty

+    wlarc='${wl}'

+

+    # Set some defaults for GNU ld with shared library support. These

+    # are reset later if shared libraries are not supported. Putting them

+    # here allows them to be overridden if necessary.

+    runpath_var=LD_RUN_PATH

+    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'

+    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'

+    # ancient GNU ld didn't support --whole-archive et. al.

+    if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then

+      _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'

+    else

+      _LT_TAGVAR(whole_archive_flag_spec, $1)=

+    fi

+    supports_anon_versioning=no

+    case `$LD -v 2>&1` in

+      *GNU\ gold*) supports_anon_versioning=yes ;;

+      *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11

+      *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...

+      *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...

+      *\ 2.11.*) ;; # other 2.11 versions

+      *) supports_anon_versioning=yes ;;

+    esac

+

+    # See if GNU ld supports shared libraries.

+    case $host_os in

+    aix[[3-9]]*)

+      # On AIX/PPC, the GNU linker is very broken

+      if test "$host_cpu" != ia64; then

+	_LT_TAGVAR(ld_shlibs, $1)=no

+	cat <<_LT_EOF 1>&2

+

+*** Warning: the GNU linker, at least up to release 2.9.1, is reported

+*** to be unable to reliably create shared libraries on AIX.

+*** Therefore, libtool is disabling shared libraries support.  If you

+*** really care for shared libraries, you may want to modify your PATH

+*** so that a non-GNU linker is found, and then restart.

+

+_LT_EOF

+      fi

+      ;;

+

+    amigaos*)

+      case $host_cpu in

+      powerpc)

+            # see comment about AmigaOS4 .so support

+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'

+            _LT_TAGVAR(archive_expsym_cmds, $1)=''

+        ;;

+      m68k)

+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'

+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

+            _LT_TAGVAR(hardcode_minus_L, $1)=yes

+        ;;

+      esac

+      ;;

+

+    beos*)

+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then

+	_LT_TAGVAR(allow_undefined_flag, $1)=unsupported

+	# Joseph Beckenbach <jrb3@best.com> says some releases of gcc

+	# support --undefined.  This deserves some investigation.  FIXME

+	_LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'

+      else

+	_LT_TAGVAR(ld_shlibs, $1)=no

+      fi

+      ;;

+

+    cygwin* | mingw* | pw32* | cegcc*)

+      # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,

+      # as there is no search path for DLLs.

+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported

+      _LT_TAGVAR(always_export_symbols, $1)=no

+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes

+      _LT_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols'

+

+      if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then

+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'

+	# If the export-symbols file already is a .def file (1st line

+	# is EXPORTS), use it as is; otherwise, prepend...

+	_LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then

+	  cp $export_symbols $output_objdir/$soname.def;

+	else

+	  echo EXPORTS > $output_objdir/$soname.def;

+	  cat $export_symbols >> $output_objdir/$soname.def;

+	fi~

+	$CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'

+      else

+	_LT_TAGVAR(ld_shlibs, $1)=no

+      fi

+      ;;

+

+    interix[[3-9]]*)

+      _LT_TAGVAR(hardcode_direct, $1)=no

+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'

+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'

+      # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.

+      # Instead, shared libraries are loaded at an image base (0x10000000 by

+      # default) and relocated if they conflict, which is a slow very memory

+      # consuming and fragmenting process.  To avoid this, we pick a random,

+      # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link

+      # time.  Moving up from 0x10000000 also allows more sbrk(2) space.

+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'

+      _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'

+      ;;

+

+    gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)

+      tmp_diet=no

+      if test "$host_os" = linux-dietlibc; then

+	case $cc_basename in

+	  diet\ *) tmp_diet=yes;;	# linux-dietlibc with static linking (!diet-dyn)

+	esac

+      fi

+      if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \

+	 && test "$tmp_diet" = no

+      then

+	tmp_addflag=

+	tmp_sharedflag='-shared'

+	case $cc_basename,$host_cpu in

+        pgcc*)				# Portland Group C compiler

+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'

+	  tmp_addflag=' $pic_flag'

+	  ;;

+	pgf77* | pgf90* | pgf95*)	# Portland Group f77 and f90 compilers

+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'

+	  tmp_addflag=' $pic_flag -Mnomain' ;;

+	ecc*,ia64* | icc*,ia64*)	# Intel C compiler on ia64

+	  tmp_addflag=' -i_dynamic' ;;

+	efc*,ia64* | ifort*,ia64*)	# Intel Fortran compiler on ia64

+	  tmp_addflag=' -i_dynamic -nofor_main' ;;

+	ifc* | ifort*)			# Intel Fortran compiler

+	  tmp_addflag=' -nofor_main' ;;

+	lf95*)				# Lahey Fortran 8.1

+	  _LT_TAGVAR(whole_archive_flag_spec, $1)=

+	  tmp_sharedflag='--shared' ;;

+	xl[[cC]]*)			# IBM XL C 8.0 on PPC (deal with xlf below)

+	  tmp_sharedflag='-qmkshrobj'

+	  tmp_addflag= ;;

+	esac

+	case `$CC -V 2>&1 | sed 5q` in

+	*Sun\ C*)			# Sun C 5.9

+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'

+	  _LT_TAGVAR(compiler_needs_object, $1)=yes

+	  tmp_sharedflag='-G' ;;

+	*Sun\ F*)			# Sun Fortran 8.3

+	  tmp_sharedflag='-G' ;;

+	esac

+	_LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'

+

+        if test "x$supports_anon_versioning" = xyes; then

+          _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~

+	    cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~

+	    echo "local: *; };" >> $output_objdir/$libname.ver~

+	    $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'

+        fi

+

+	case $cc_basename in

+	xlf*)

+	  # IBM XL Fortran 10.1 on PPC cannot create shared libs itself

+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'

+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=

+	  _LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir'

+	  _LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib'

+	  if test "x$supports_anon_versioning" = xyes; then

+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~

+	      cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~

+	      echo "local: *; };" >> $output_objdir/$libname.ver~

+	      $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'

+	  fi

+	  ;;

+	esac

+      else

+        _LT_TAGVAR(ld_shlibs, $1)=no

+      fi

+      ;;

+

+    netbsd* | netbsdelf*-gnu)

+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then

+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'

+	wlarc=

+      else

+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'

+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'

+      fi

+      ;;

+

+    solaris*)

+      if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then

+	_LT_TAGVAR(ld_shlibs, $1)=no

+	cat <<_LT_EOF 1>&2

+

+*** Warning: The releases 2.8.* of the GNU linker cannot reliably

+*** create shared libraries on Solaris systems.  Therefore, libtool

+*** is disabling shared libraries support.  We urge you to upgrade GNU

+*** binutils to release 2.9.1 or newer.  Another option is to modify

+*** your PATH or compiler configuration so that the native linker is

+*** used, and then restart.

+

+_LT_EOF

+      elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then

+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'

+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'

+      else

+	_LT_TAGVAR(ld_shlibs, $1)=no

+      fi

+      ;;

+

+    sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*)

+      case `$LD -v 2>&1` in

+        *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*)

+	_LT_TAGVAR(ld_shlibs, $1)=no

+	cat <<_LT_EOF 1>&2

+

+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not

+*** reliably create shared libraries on SCO systems.  Therefore, libtool

+*** is disabling shared libraries support.  We urge you to upgrade GNU

+*** binutils to release 2.16.91.0.3 or newer.  Another option is to modify

+*** your PATH or compiler configuration so that the native linker is

+*** used, and then restart.

+

+_LT_EOF

+	;;

+	*)

+	  # For security reasons, it is highly recommended that you always

+	  # use absolute paths for naming shared libraries, and exclude the

+	  # DT_RUNPATH tag from executables and libraries.  But doing so

+	  # requires that you compile everything twice, which is a pain.

+	  if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then

+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'

+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'

+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'

+	  else

+	    _LT_TAGVAR(ld_shlibs, $1)=no

+	  fi

+	;;

+      esac

+      ;;

+

+    sunos4*)

+      _LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'

+      wlarc=

+      _LT_TAGVAR(hardcode_direct, $1)=yes

+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+      ;;

+

+    *)

+      if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then

+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'

+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'

+      else

+	_LT_TAGVAR(ld_shlibs, $1)=no

+      fi

+      ;;

+    esac

+

+    if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then

+      runpath_var=

+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=

+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=

+      _LT_TAGVAR(whole_archive_flag_spec, $1)=

+    fi

+  else

+    # PORTME fill in a description of your system's linker (not GNU ld)

+    case $host_os in

+    aix3*)

+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported

+      _LT_TAGVAR(always_export_symbols, $1)=yes

+      _LT_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'

+      # Note: this linker hardcodes the directories in LIBPATH if there

+      # are no directories specified by -L.

+      _LT_TAGVAR(hardcode_minus_L, $1)=yes

+      if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then

+	# Neither direct hardcoding nor static linking is supported with a

+	# broken collect2.

+	_LT_TAGVAR(hardcode_direct, $1)=unsupported

+      fi

+      ;;

+

+    aix[[4-9]]*)

+      if test "$host_cpu" = ia64; then

+	# On IA64, the linker does run time linking by default, so we don't

+	# have to do anything special.

+	aix_use_runtimelinking=no

+	exp_sym_flag='-Bexport'

+	no_entry_flag=""

+      else

+	# If we're using GNU nm, then we don't want the "-C" option.

+	# -C means demangle to AIX nm, but means don't demangle with GNU nm

+	if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then

+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'

+	else

+	  _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'

+	fi

+	aix_use_runtimelinking=no

+

+	# Test if we are trying to use run time linking or normal

+	# AIX style linking. If -brtl is somewhere in LDFLAGS, we

+	# need to do runtime linking.

+	case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)

+	  for ld_flag in $LDFLAGS; do

+	  if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then

+	    aix_use_runtimelinking=yes

+	    break

+	  fi

+	  done

+	  ;;

+	esac

+

+	exp_sym_flag='-bexport'

+	no_entry_flag='-bnoentry'

+      fi

+

+      # When large executables or shared objects are built, AIX ld can

+      # have problems creating the table of contents.  If linking a library

+      # or program results in "error TOC overflow" add -mminimal-toc to

+      # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not

+      # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.

+

+      _LT_TAGVAR(archive_cmds, $1)=''

+      _LT_TAGVAR(hardcode_direct, $1)=yes

+      _LT_TAGVAR(hardcode_direct_absolute, $1)=yes

+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'

+      _LT_TAGVAR(link_all_deplibs, $1)=yes

+      _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'

+

+      if test "$GCC" = yes; then

+	case $host_os in aix4.[[012]]|aix4.[[012]].*)

+	# We only want to do this on AIX 4.2 and lower, the check

+	# below for broken collect2 doesn't work under 4.3+

+	  collect2name=`${CC} -print-prog-name=collect2`

+	  if test -f "$collect2name" &&

+	   strings "$collect2name" | $GREP resolve_lib_name >/dev/null

+	  then

+	  # We have reworked collect2

+	  :

+	  else

+	  # We have old collect2

+	  _LT_TAGVAR(hardcode_direct, $1)=unsupported

+	  # It fails to find uninstalled libraries when the uninstalled

+	  # path is not listed in the libpath.  Setting hardcode_minus_L

+	  # to unsupported forces relinking

+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes

+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=

+	  fi

+	  ;;

+	esac

+	shared_flag='-shared'

+	if test "$aix_use_runtimelinking" = yes; then

+	  shared_flag="$shared_flag "'${wl}-G'

+	fi

+	_LT_TAGVAR(link_all_deplibs, $1)=no

+      else

+	# not using gcc

+	if test "$host_cpu" = ia64; then

+	# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release

+	# chokes on -Wl,-G. The following line is correct:

+	  shared_flag='-G'

+	else

+	  if test "$aix_use_runtimelinking" = yes; then

+	    shared_flag='${wl}-G'

+	  else

+	    shared_flag='${wl}-bM:SRE'

+	  fi

+	fi

+      fi

+

+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'

+      # It seems that -bexpall does not export symbols beginning with

+      # underscore (_), so it is better to generate a list of symbols to export.

+      _LT_TAGVAR(always_export_symbols, $1)=yes

+      if test "$aix_use_runtimelinking" = yes; then

+	# Warning - without using the other runtime loading flags (-brtl),

+	# -berok will link without error, but may produce a broken library.

+	_LT_TAGVAR(allow_undefined_flag, $1)='-berok'

+        # Determine the default libpath from the value encoded in an

+        # empty executable.

+        _LT_SYS_MODULE_PATH_AIX

+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"

+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"

+      else

+	if test "$host_cpu" = ia64; then

+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'

+	  _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"

+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"

+	else

+	 # Determine the default libpath from the value encoded in an

+	 # empty executable.

+	 _LT_SYS_MODULE_PATH_AIX

+	 _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"

+	  # Warning - without using the other run time loading flags,

+	  # -berok will link without error, but may produce a broken library.

+	  _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'

+	  _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'

+	  # Exported symbols can be pulled into shared objects from archives

+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'

+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes

+	  # This is similar to how AIX traditionally builds its shared libraries.

+	  _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'

+	fi

+      fi

+      ;;

+

+    amigaos*)

+      case $host_cpu in

+      powerpc)

+            # see comment about AmigaOS4 .so support

+            _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'

+            _LT_TAGVAR(archive_expsym_cmds, $1)=''

+        ;;

+      m68k)

+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'

+            _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

+            _LT_TAGVAR(hardcode_minus_L, $1)=yes

+        ;;

+      esac

+      ;;

+

+    bsdi[[45]]*)

+      _LT_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic

+      ;;

+

+    cygwin* | mingw* | pw32* | cegcc*)

+      # When not using gcc, we currently assume that we are using

+      # Microsoft Visual C++.

+      # hardcode_libdir_flag_spec is actually meaningless, as there is

+      # no search path for DLLs.

+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)=' '

+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported

+      # Tell ltmain to make .lib files, not .a files.

+      libext=lib

+      # Tell ltmain to make .dll files, not .so files.

+      shrext_cmds=".dll"

+      # FIXME: Setting linknames here is a bad hack.

+      _LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames='

+      # The linker will automatically build a .lib file if we build a DLL.

+      _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'

+      # FIXME: Should let the user specify the lib program.

+      _LT_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs'

+      _LT_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`'

+      _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes

+      ;;

+

+    darwin* | rhapsody*)

+      _LT_DARWIN_LINKER_FEATURES($1)

+      ;;

+

+    dgux*)

+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'

+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+      ;;

+

+    freebsd1*)

+      _LT_TAGVAR(ld_shlibs, $1)=no

+      ;;

+

+    # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor

+    # support.  Future versions do this automatically, but an explicit c++rt0.o

+    # does not break anything, and helps significantly (at the cost of a little

+    # extra space).

+    freebsd2.2*)

+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'

+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'

+      _LT_TAGVAR(hardcode_direct, $1)=yes

+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+      ;;

+

+    # Unfortunately, older versions of FreeBSD 2 do not have this feature.

+    freebsd2*)

+      _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'

+      _LT_TAGVAR(hardcode_direct, $1)=yes

+      _LT_TAGVAR(hardcode_minus_L, $1)=yes

+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+      ;;

+

+    # FreeBSD 3 and greater uses gcc -shared to do shared libraries.

+    freebsd* | dragonfly*)

+      _LT_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'

+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'

+      _LT_TAGVAR(hardcode_direct, $1)=yes

+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+      ;;

+

+    hpux9*)

+      if test "$GCC" = yes; then

+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'

+      else

+	_LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'

+      fi

+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'

+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:

+      _LT_TAGVAR(hardcode_direct, $1)=yes

+

+      # hardcode_minus_L: Not really in the search PATH,

+      # but as the default location of the library.

+      _LT_TAGVAR(hardcode_minus_L, $1)=yes

+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'

+      ;;

+

+    hpux10*)

+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then

+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'

+      else

+	_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'

+      fi

+      if test "$with_gnu_ld" = no; then

+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'

+	_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir'

+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:

+	_LT_TAGVAR(hardcode_direct, $1)=yes

+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes

+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'

+	# hardcode_minus_L: Not really in the search PATH,

+	# but as the default location of the library.

+	_LT_TAGVAR(hardcode_minus_L, $1)=yes

+      fi

+      ;;

+

+    hpux11*)

+      if test "$GCC" = yes -a "$with_gnu_ld" = no; then

+	case $host_cpu in

+	hppa*64*)

+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'

+	  ;;

+	ia64*)

+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'

+	  ;;

+	*)

+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'

+	  ;;

+	esac

+      else

+	case $host_cpu in

+	hppa*64*)

+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'

+	  ;;

+	ia64*)

+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'

+	  ;;

+	*)

+	  _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'

+	  ;;

+	esac

+      fi

+      if test "$with_gnu_ld" = no; then

+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'

+	_LT_TAGVAR(hardcode_libdir_separator, $1)=:

+

+	case $host_cpu in

+	hppa*64*|ia64*)

+	  _LT_TAGVAR(hardcode_direct, $1)=no

+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+	  ;;

+	*)

+	  _LT_TAGVAR(hardcode_direct, $1)=yes

+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes

+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'

+

+	  # hardcode_minus_L: Not really in the search PATH,

+	  # but as the default location of the library.

+	  _LT_TAGVAR(hardcode_minus_L, $1)=yes

+	  ;;

+	esac

+      fi

+      ;;

+

+    irix5* | irix6* | nonstopux*)

+      if test "$GCC" = yes; then

+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'

+	# Try to use the -exported_symbol ld option, if it does not

+	# work, assume that -exports_file does not work either and

+	# implicitly export all symbols.

+        save_LDFLAGS="$LDFLAGS"

+        LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"

+        AC_LINK_IFELSE(int foo(void) {},

+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'

+        )

+        LDFLAGS="$save_LDFLAGS"

+      else

+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'

+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'

+      fi

+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'

+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'

+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:

+      _LT_TAGVAR(inherit_rpath, $1)=yes

+      _LT_TAGVAR(link_all_deplibs, $1)=yes

+      ;;

+

+    netbsd* | netbsdelf*-gnu)

+      if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then

+	_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out

+      else

+	_LT_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags'      # ELF

+      fi

+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'

+      _LT_TAGVAR(hardcode_direct, $1)=yes

+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+      ;;

+

+    newsos6)

+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'

+      _LT_TAGVAR(hardcode_direct, $1)=yes

+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'

+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:

+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+      ;;

+

+    *nto* | *qnx*)

+      ;;

+

+    openbsd*)

+      if test -f /usr/libexec/ld.so; then

+	_LT_TAGVAR(hardcode_direct, $1)=yes

+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+	_LT_TAGVAR(hardcode_direct_absolute, $1)=yes

+	if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then

+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'

+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'

+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'

+	  _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'

+	else

+	  case $host_os in

+	   openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)

+	     _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'

+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'

+	     ;;

+	   *)

+	     _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'

+	     _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'

+	     ;;

+	  esac

+	fi

+      else

+	_LT_TAGVAR(ld_shlibs, $1)=no

+      fi

+      ;;

+

+    os2*)

+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

+      _LT_TAGVAR(hardcode_minus_L, $1)=yes

+      _LT_TAGVAR(allow_undefined_flag, $1)=unsupported

+      _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'

+      _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'

+      ;;

+

+    osf3*)

+      if test "$GCC" = yes; then

+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'

+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'

+      else

+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'

+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'

+      fi

+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'

+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'

+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:

+      ;;

+

+    osf4* | osf5*)	# as osf3* with the addition of -msym flag

+      if test "$GCC" = yes; then

+	_LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'

+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'

+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'

+      else

+	_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'

+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'

+	_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~

+	$CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'

+

+	# Both c and cxx compiler support -rpath directly

+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'

+      fi

+      _LT_TAGVAR(archive_cmds_need_lc, $1)='no'

+      _LT_TAGVAR(hardcode_libdir_separator, $1)=:

+      ;;

+

+    solaris*)

+      _LT_TAGVAR(no_undefined_flag, $1)=' -z defs'

+      if test "$GCC" = yes; then

+	wlarc='${wl}'

+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'

+	_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~

+	  $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'

+      else

+	case `$CC -V 2>&1` in

+	*"Compilers 5.0"*)

+	  wlarc=''

+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'

+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~

+	  $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'

+	  ;;

+	*)

+	  wlarc='${wl}'

+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'

+	  _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~

+	  $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'

+	  ;;

+	esac

+      fi

+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'

+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+      case $host_os in

+      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;

+      *)

+	# The compiler driver will combine and reorder linker options,

+	# but understands `-z linker_flag'.  GCC discards it without `$wl',

+	# but is careful enough not to reorder.

+	# Supported since Solaris 2.6 (maybe 2.5.1?)

+	if test "$GCC" = yes; then

+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'

+	else

+	  _LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'

+	fi

+	;;

+      esac

+      _LT_TAGVAR(link_all_deplibs, $1)=yes

+      ;;

+

+    sunos4*)

+      if test "x$host_vendor" = xsequent; then

+	# Use $CC to link under sequent, because it throws in some extra .o

+	# files that make .init and .fini sections work.

+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'

+      else

+	_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'

+      fi

+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

+      _LT_TAGVAR(hardcode_direct, $1)=yes

+      _LT_TAGVAR(hardcode_minus_L, $1)=yes

+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+      ;;

+

+    sysv4)

+      case $host_vendor in

+	sni)

+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'

+	  _LT_TAGVAR(hardcode_direct, $1)=yes # is this really true???

+	;;

+	siemens)

+	  ## LD is ld it makes a PLAMLIB

+	  ## CC just makes a GrossModule.

+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags'

+	  _LT_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs'

+	  _LT_TAGVAR(hardcode_direct, $1)=no

+        ;;

+	motorola)

+	  _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'

+	  _LT_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie

+	;;

+      esac

+      runpath_var='LD_RUN_PATH'

+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+      ;;

+

+    sysv4.3*)

+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'

+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport'

+      ;;

+

+    sysv4*MP*)

+      if test -d /usr/nec; then

+	_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'

+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+	runpath_var=LD_RUN_PATH

+	hardcode_runpath_var=yes

+	_LT_TAGVAR(ld_shlibs, $1)=yes

+      fi

+      ;;

+

+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)

+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'

+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no

+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+      runpath_var='LD_RUN_PATH'

+

+      if test "$GCC" = yes; then

+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'

+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'

+      else

+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'

+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'

+      fi

+      ;;

+

+    sysv5* | sco3.2v5* | sco5v6*)

+      # Note: We can NOT use -z defs as we might desire, because we do not

+      # link with -lc, and that would cause any symbols used from libc to

+      # always be unresolved, which means just about no library would

+      # ever link correctly.  If we're not using GNU ld we use -z text

+      # though, which does catch some bad symbols but isn't as heavy-handed

+      # as -z defs.

+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'

+      _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'

+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no

+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'

+      _LT_TAGVAR(hardcode_libdir_separator, $1)=':'

+      _LT_TAGVAR(link_all_deplibs, $1)=yes

+      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'

+      runpath_var='LD_RUN_PATH'

+

+      if test "$GCC" = yes; then

+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'

+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'

+      else

+	_LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'

+	_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'

+      fi

+      ;;

+

+    uts4*)

+      _LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'

+      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+      ;;

+

+    *)

+      _LT_TAGVAR(ld_shlibs, $1)=no

+      ;;

+    esac

+

+    if test x$host_vendor = xsni; then

+      case $host in

+      sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)

+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'

+	;;

+      esac

+    fi

+  fi

+])

+AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])

+test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no

+

+_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld

+

+_LT_DECL([], [libext], [0], [Old archive suffix (normally "a")])dnl

+_LT_DECL([], [shrext_cmds], [1], [Shared library suffix (normally ".so")])dnl

+_LT_DECL([], [extract_expsyms_cmds], [2],

+    [The commands to extract the exported symbol list from a shared archive])

+

+#

+# Do we need to explicitly link libc?

+#

+case "x$_LT_TAGVAR(archive_cmds_need_lc, $1)" in

+x|xyes)

+  # Assume -lc should be added

+  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes

+

+  if test "$enable_shared" = yes && test "$GCC" = yes; then

+    case $_LT_TAGVAR(archive_cmds, $1) in

+    *'~'*)

+      # FIXME: we may have to deal with multi-command sequences.

+      ;;

+    '$CC '*)

+      # Test whether the compiler implicitly links with -lc since on some

+      # systems, -lgcc has to come before -lc. If gcc already passes -lc

+      # to ld, don't add -lc before -lgcc.

+      AC_MSG_CHECKING([whether -lc should be explicitly linked in])

+      $RM conftest*

+      echo "$lt_simple_compile_test_code" > conftest.$ac_ext

+

+      if AC_TRY_EVAL(ac_compile) 2>conftest.err; then

+        soname=conftest

+        lib=conftest

+        libobjs=conftest.$ac_objext

+        deplibs=

+        wl=$_LT_TAGVAR(lt_prog_compiler_wl, $1)

+	pic_flag=$_LT_TAGVAR(lt_prog_compiler_pic, $1)

+        compiler_flags=-v

+        linker_flags=-v

+        verstring=

+        output_objdir=.

+        libname=conftest

+        lt_save_allow_undefined_flag=$_LT_TAGVAR(allow_undefined_flag, $1)

+        _LT_TAGVAR(allow_undefined_flag, $1)=

+        if AC_TRY_EVAL(_LT_TAGVAR(archive_cmds, $1) 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1)

+        then

+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=no

+        else

+	  _LT_TAGVAR(archive_cmds_need_lc, $1)=yes

+        fi

+        _LT_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag

+      else

+        cat conftest.err 1>&5

+      fi

+      $RM conftest*

+      AC_MSG_RESULT([$_LT_TAGVAR(archive_cmds_need_lc, $1)])

+      ;;

+    esac

+  fi

+  ;;

+esac

+

+_LT_TAGDECL([build_libtool_need_lc], [archive_cmds_need_lc], [0],

+    [Whether or not to add -lc for building shared libraries])

+_LT_TAGDECL([allow_libtool_libs_with_static_runtimes],

+    [enable_shared_with_static_runtimes], [0],

+    [Whether or not to disallow shared libs when runtime libs are static])

+_LT_TAGDECL([], [export_dynamic_flag_spec], [1],

+    [Compiler flag to allow reflexive dlopens])

+_LT_TAGDECL([], [whole_archive_flag_spec], [1],

+    [Compiler flag to generate shared objects directly from archives])

+_LT_TAGDECL([], [compiler_needs_object], [1],

+    [Whether the compiler copes with passing no objects directly])

+_LT_TAGDECL([], [old_archive_from_new_cmds], [2],

+    [Create an old-style archive from a shared archive])

+_LT_TAGDECL([], [old_archive_from_expsyms_cmds], [2],

+    [Create a temporary old-style archive to link instead of a shared archive])

+_LT_TAGDECL([], [archive_cmds], [2], [Commands used to build a shared archive])

+_LT_TAGDECL([], [archive_expsym_cmds], [2])

+_LT_TAGDECL([], [module_cmds], [2],

+    [Commands used to build a loadable module if different from building

+    a shared archive.])

+_LT_TAGDECL([], [module_expsym_cmds], [2])

+_LT_TAGDECL([], [with_gnu_ld], [1],

+    [Whether we are building with GNU ld or not])

+_LT_TAGDECL([], [allow_undefined_flag], [1],

+    [Flag that allows shared libraries with undefined symbols to be built])

+_LT_TAGDECL([], [no_undefined_flag], [1],

+    [Flag that enforces no undefined symbols])

+_LT_TAGDECL([], [hardcode_libdir_flag_spec], [1],

+    [Flag to hardcode $libdir into a binary during linking.

+    This must work even if $libdir does not exist])

+_LT_TAGDECL([], [hardcode_libdir_flag_spec_ld], [1],

+    [[If ld is used when linking, flag to hardcode $libdir into a binary

+    during linking.  This must work even if $libdir does not exist]])

+_LT_TAGDECL([], [hardcode_libdir_separator], [1],

+    [Whether we need a single "-rpath" flag with a separated argument])

+_LT_TAGDECL([], [hardcode_direct], [0],

+    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes

+    DIR into the resulting binary])

+_LT_TAGDECL([], [hardcode_direct_absolute], [0],

+    [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes

+    DIR into the resulting binary and the resulting library dependency is

+    "absolute", i.e impossible to change by setting ${shlibpath_var} if the

+    library is relocated])

+_LT_TAGDECL([], [hardcode_minus_L], [0],

+    [Set to "yes" if using the -LDIR flag during linking hardcodes DIR

+    into the resulting binary])

+_LT_TAGDECL([], [hardcode_shlibpath_var], [0],

+    [Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR

+    into the resulting binary])

+_LT_TAGDECL([], [hardcode_automatic], [0],

+    [Set to "yes" if building a shared library automatically hardcodes DIR

+    into the library and all subsequent libraries and executables linked

+    against it])

+_LT_TAGDECL([], [inherit_rpath], [0],

+    [Set to yes if linker adds runtime paths of dependent libraries

+    to runtime path list])

+_LT_TAGDECL([], [link_all_deplibs], [0],

+    [Whether libtool must link a program against all its dependency libraries])

+_LT_TAGDECL([], [fix_srcfile_path], [1],

+    [Fix the shell variable $srcfile for the compiler])

+_LT_TAGDECL([], [always_export_symbols], [0],

+    [Set to "yes" if exported symbols are required])

+_LT_TAGDECL([], [export_symbols_cmds], [2],

+    [The commands to list exported symbols])

+_LT_TAGDECL([], [exclude_expsyms], [1],

+    [Symbols that should not be listed in the preloaded symbols])

+_LT_TAGDECL([], [include_expsyms], [1],

+    [Symbols that must always be exported])

+_LT_TAGDECL([], [prelink_cmds], [2],

+    [Commands necessary for linking programs (against libraries) with templates])

+_LT_TAGDECL([], [file_list_spec], [1],

+    [Specify filename containing input files])

+dnl FIXME: Not yet implemented

+dnl _LT_TAGDECL([], [thread_safe_flag_spec], [1],

+dnl    [Compiler flag to generate thread safe objects])

+])# _LT_LINKER_SHLIBS

+

+

+# _LT_LANG_C_CONFIG([TAG])

+# ------------------------

+# Ensure that the configuration variables for a C compiler are suitably

+# defined.  These variables are subsequently used by _LT_CONFIG to write

+# the compiler configuration to `libtool'.

+m4_defun([_LT_LANG_C_CONFIG],

+[m4_require([_LT_DECL_EGREP])dnl

+lt_save_CC="$CC"

+AC_LANG_PUSH(C)

+

+# Source file extension for C test sources.

+ac_ext=c

+

+# Object file extension for compiled C test sources.

+objext=o

+_LT_TAGVAR(objext, $1)=$objext

+

+# Code to be used in simple compile tests

+lt_simple_compile_test_code="int some_variable = 0;"

+

+# Code to be used in simple link tests

+lt_simple_link_test_code='int main(){return(0);}'

+

+_LT_TAG_COMPILER

+# Save the default compiler, since it gets overwritten when the other

+# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP.

+compiler_DEFAULT=$CC

+

+# save warnings/boilerplate of simple test code

+_LT_COMPILER_BOILERPLATE

+_LT_LINKER_BOILERPLATE

+

+## CAVEAT EMPTOR:

+## There is no encapsulation within the following macros, do not change

+## the running order or otherwise move them around unless you know exactly

+## what you are doing...

+if test -n "$compiler"; then

+  _LT_COMPILER_NO_RTTI($1)

+  _LT_COMPILER_PIC($1)

+  _LT_COMPILER_C_O($1)

+  _LT_COMPILER_FILE_LOCKS($1)

+  _LT_LINKER_SHLIBS($1)

+  _LT_SYS_DYNAMIC_LINKER($1)

+  _LT_LINKER_HARDCODE_LIBPATH($1)

+  LT_SYS_DLOPEN_SELF

+  _LT_CMD_STRIPLIB

+

+  # Report which library types will actually be built

+  AC_MSG_CHECKING([if libtool supports shared libraries])

+  AC_MSG_RESULT([$can_build_shared])

+

+  AC_MSG_CHECKING([whether to build shared libraries])

+  test "$can_build_shared" = "no" && enable_shared=no

+

+  # On AIX, shared libraries and static libraries use the same namespace, and

+  # are all built from PIC.

+  case $host_os in

+  aix3*)

+    test "$enable_shared" = yes && enable_static=no

+    if test -n "$RANLIB"; then

+      archive_cmds="$archive_cmds~\$RANLIB \$lib"

+      postinstall_cmds='$RANLIB $lib'

+    fi

+    ;;

+

+  aix[[4-9]]*)

+    if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then

+      test "$enable_shared" = yes && enable_static=no

+    fi

+    ;;

+  esac

+  AC_MSG_RESULT([$enable_shared])

+

+  AC_MSG_CHECKING([whether to build static libraries])

+  # Make sure either enable_shared or enable_static is yes.

+  test "$enable_shared" = yes || enable_static=yes

+  AC_MSG_RESULT([$enable_static])

+

+  _LT_CONFIG($1)

+fi

+AC_LANG_POP

+CC="$lt_save_CC"

+])# _LT_LANG_C_CONFIG

+

+

+# _LT_PROG_CXX

+# ------------

+# Since AC_PROG_CXX is broken, in that it returns g++ if there is no c++

+# compiler, we have our own version here.

+m4_defun([_LT_PROG_CXX],

+[

+pushdef([AC_MSG_ERROR], [_lt_caught_CXX_error=yes])

+AC_PROG_CXX

+if test -n "$CXX" && ( test "X$CXX" != "Xno" &&

+    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||

+    (test "X$CXX" != "Xg++"))) ; then

+  AC_PROG_CXXCPP

+else

+  _lt_caught_CXX_error=yes

+fi

+popdef([AC_MSG_ERROR])

+])# _LT_PROG_CXX

+

+dnl aclocal-1.4 backwards compatibility:

+dnl AC_DEFUN([_LT_PROG_CXX], [])

+

+

+# _LT_LANG_CXX_CONFIG([TAG])

+# --------------------------

+# Ensure that the configuration variables for a C++ compiler are suitably

+# defined.  These variables are subsequently used by _LT_CONFIG to write

+# the compiler configuration to `libtool'.

+m4_defun([_LT_LANG_CXX_CONFIG],

+[AC_REQUIRE([_LT_PROG_CXX])dnl

+m4_require([_LT_FILEUTILS_DEFAULTS])dnl

+m4_require([_LT_DECL_EGREP])dnl

+

+AC_LANG_PUSH(C++)

+_LT_TAGVAR(archive_cmds_need_lc, $1)=no

+_LT_TAGVAR(allow_undefined_flag, $1)=

+_LT_TAGVAR(always_export_symbols, $1)=no

+_LT_TAGVAR(archive_expsym_cmds, $1)=

+_LT_TAGVAR(compiler_needs_object, $1)=no

+_LT_TAGVAR(export_dynamic_flag_spec, $1)=

+_LT_TAGVAR(hardcode_direct, $1)=no

+_LT_TAGVAR(hardcode_direct_absolute, $1)=no

+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=

+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=

+_LT_TAGVAR(hardcode_libdir_separator, $1)=

+_LT_TAGVAR(hardcode_minus_L, $1)=no

+_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported

+_LT_TAGVAR(hardcode_automatic, $1)=no

+_LT_TAGVAR(inherit_rpath, $1)=no

+_LT_TAGVAR(module_cmds, $1)=

+_LT_TAGVAR(module_expsym_cmds, $1)=

+_LT_TAGVAR(link_all_deplibs, $1)=unknown

+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds

+_LT_TAGVAR(no_undefined_flag, $1)=

+_LT_TAGVAR(whole_archive_flag_spec, $1)=

+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no

+

+# Source file extension for C++ test sources.

+ac_ext=cpp

+

+# Object file extension for compiled C++ test sources.

+objext=o

+_LT_TAGVAR(objext, $1)=$objext

+

+# No sense in running all these tests if we already determined that

+# the CXX compiler isn't working.  Some variables (like enable_shared)

+# are currently assumed to apply to all compilers on this platform,

+# and will be corrupted by setting them based on a non-working compiler.

+if test "$_lt_caught_CXX_error" != yes; then

+  # Code to be used in simple compile tests

+  lt_simple_compile_test_code="int some_variable = 0;"

+

+  # Code to be used in simple link tests

+  lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }'

+

+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.

+  _LT_TAG_COMPILER

+

+  # save warnings/boilerplate of simple test code

+  _LT_COMPILER_BOILERPLATE

+  _LT_LINKER_BOILERPLATE

+

+  # Allow CC to be a program name with arguments.

+  lt_save_CC=$CC

+  lt_save_LD=$LD

+  lt_save_GCC=$GCC

+  GCC=$GXX

+  lt_save_with_gnu_ld=$with_gnu_ld

+  lt_save_path_LD=$lt_cv_path_LD

+  if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then

+    lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx

+  else

+    $as_unset lt_cv_prog_gnu_ld

+  fi

+  if test -n "${lt_cv_path_LDCXX+set}"; then

+    lt_cv_path_LD=$lt_cv_path_LDCXX

+  else

+    $as_unset lt_cv_path_LD

+  fi

+  test -z "${LDCXX+set}" || LD=$LDCXX

+  CC=${CXX-"c++"}

+  compiler=$CC

+  _LT_TAGVAR(compiler, $1)=$CC

+  _LT_CC_BASENAME([$compiler])

+

+  if test -n "$compiler"; then

+    # We don't want -fno-exception when compiling C++ code, so set the

+    # no_builtin_flag separately

+    if test "$GXX" = yes; then

+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'

+    else

+      _LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=

+    fi

+

+    if test "$GXX" = yes; then

+      # Set up default GNU C++ configuration

+

+      LT_PATH_LD

+

+      # Check if GNU C++ uses GNU ld as the underlying linker, since the

+      # archiving commands below assume that GNU ld is being used.

+      if test "$with_gnu_ld" = yes; then

+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'

+        _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'

+

+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'

+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'

+

+        # If archive_cmds runs LD, not CC, wlarc should be empty

+        # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to

+        #     investigate it a little bit more. (MM)

+        wlarc='${wl}'

+

+        # ancient GNU ld didn't support --whole-archive et. al.

+        if eval "`$CC -print-prog-name=ld` --help 2>&1" |

+	  $GREP 'no-whole-archive' > /dev/null; then

+          _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'

+        else

+          _LT_TAGVAR(whole_archive_flag_spec, $1)=

+        fi

+      else

+        with_gnu_ld=no

+        wlarc=

+

+        # A generic and very simple default shared library creation

+        # command for GNU C++ for the case where it uses the native

+        # linker, instead of GNU ld.  If possible, this setting should

+        # overridden to take advantage of the native linker features on

+        # the platform it is being used on.

+        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'

+      fi

+

+      # Commands to make compiler produce verbose output that lists

+      # what "hidden" libraries, object files and flags are used when

+      # linking a shared library.

+      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'

+

+    else

+      GXX=no

+      with_gnu_ld=no

+      wlarc=

+    fi

+

+    # PORTME: fill in a description of your system's C++ link characteristics

+    AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries])

+    _LT_TAGVAR(ld_shlibs, $1)=yes

+    case $host_os in

+      aix3*)

+        # FIXME: insert proper C++ library support

+        _LT_TAGVAR(ld_shlibs, $1)=no

+        ;;

+      aix[[4-9]]*)

+        if test "$host_cpu" = ia64; then

+          # On IA64, the linker does run time linking by default, so we don't

+          # have to do anything special.

+          aix_use_runtimelinking=no

+          exp_sym_flag='-Bexport'

+          no_entry_flag=""

+        else

+          aix_use_runtimelinking=no

+

+          # Test if we are trying to use run time linking or normal

+          # AIX style linking. If -brtl is somewhere in LDFLAGS, we

+          # need to do runtime linking.

+          case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)

+	    for ld_flag in $LDFLAGS; do

+	      case $ld_flag in

+	      *-brtl*)

+	        aix_use_runtimelinking=yes

+	        break

+	        ;;

+	      esac

+	    done

+	    ;;

+          esac

+

+          exp_sym_flag='-bexport'

+          no_entry_flag='-bnoentry'

+        fi

+

+        # When large executables or shared objects are built, AIX ld can

+        # have problems creating the table of contents.  If linking a library

+        # or program results in "error TOC overflow" add -mminimal-toc to

+        # CXXFLAGS/CFLAGS for g++/gcc.  In the cases where that is not

+        # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.

+

+        _LT_TAGVAR(archive_cmds, $1)=''

+        _LT_TAGVAR(hardcode_direct, $1)=yes

+        _LT_TAGVAR(hardcode_direct_absolute, $1)=yes

+        _LT_TAGVAR(hardcode_libdir_separator, $1)=':'

+        _LT_TAGVAR(link_all_deplibs, $1)=yes

+        _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'

+

+        if test "$GXX" = yes; then

+          case $host_os in aix4.[[012]]|aix4.[[012]].*)

+          # We only want to do this on AIX 4.2 and lower, the check

+          # below for broken collect2 doesn't work under 4.3+

+	  collect2name=`${CC} -print-prog-name=collect2`

+	  if test -f "$collect2name" &&

+	     strings "$collect2name" | $GREP resolve_lib_name >/dev/null

+	  then

+	    # We have reworked collect2

+	    :

+	  else

+	    # We have old collect2

+	    _LT_TAGVAR(hardcode_direct, $1)=unsupported

+	    # It fails to find uninstalled libraries when the uninstalled

+	    # path is not listed in the libpath.  Setting hardcode_minus_L

+	    # to unsupported forces relinking

+	    _LT_TAGVAR(hardcode_minus_L, $1)=yes

+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=

+	  fi

+          esac

+          shared_flag='-shared'

+	  if test "$aix_use_runtimelinking" = yes; then

+	    shared_flag="$shared_flag "'${wl}-G'

+	  fi

+        else

+          # not using gcc

+          if test "$host_cpu" = ia64; then

+	  # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release

+	  # chokes on -Wl,-G. The following line is correct:

+	  shared_flag='-G'

+          else

+	    if test "$aix_use_runtimelinking" = yes; then

+	      shared_flag='${wl}-G'

+	    else

+	      shared_flag='${wl}-bM:SRE'

+	    fi

+          fi

+        fi

+

+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'

+        # It seems that -bexpall does not export symbols beginning with

+        # underscore (_), so it is better to generate a list of symbols to

+	# export.

+        _LT_TAGVAR(always_export_symbols, $1)=yes

+        if test "$aix_use_runtimelinking" = yes; then

+          # Warning - without using the other runtime loading flags (-brtl),

+          # -berok will link without error, but may produce a broken library.

+          _LT_TAGVAR(allow_undefined_flag, $1)='-berok'

+          # Determine the default libpath from the value encoded in an empty

+          # executable.

+          _LT_SYS_MODULE_PATH_AIX

+          _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"

+

+          _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"

+        else

+          if test "$host_cpu" = ia64; then

+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'

+	    _LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"

+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"

+          else

+	    # Determine the default libpath from the value encoded in an

+	    # empty executable.

+	    _LT_SYS_MODULE_PATH_AIX

+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"

+	    # Warning - without using the other run time loading flags,

+	    # -berok will link without error, but may produce a broken library.

+	    _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'

+	    _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'

+	    # Exported symbols can be pulled into shared objects from archives

+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'

+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=yes

+	    # This is similar to how AIX traditionally builds its shared

+	    # libraries.

+	    _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'

+          fi

+        fi

+        ;;

+

+      beos*)

+	if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then

+	  _LT_TAGVAR(allow_undefined_flag, $1)=unsupported

+	  # Joseph Beckenbach <jrb3@best.com> says some releases of gcc

+	  # support --undefined.  This deserves some investigation.  FIXME

+	  _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'

+	else

+	  _LT_TAGVAR(ld_shlibs, $1)=no

+	fi

+	;;

+

+      chorus*)

+        case $cc_basename in

+          *)

+	  # FIXME: insert proper C++ library support

+	  _LT_TAGVAR(ld_shlibs, $1)=no

+	  ;;

+        esac

+        ;;

+

+      cygwin* | mingw* | pw32* | cegcc*)

+        # _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,

+        # as there is no search path for DLLs.

+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'

+        _LT_TAGVAR(allow_undefined_flag, $1)=unsupported

+        _LT_TAGVAR(always_export_symbols, $1)=no

+        _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes

+

+        if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then

+          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'

+          # If the export-symbols file already is a .def file (1st line

+          # is EXPORTS), use it as is; otherwise, prepend...

+          _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then

+	    cp $export_symbols $output_objdir/$soname.def;

+          else

+	    echo EXPORTS > $output_objdir/$soname.def;

+	    cat $export_symbols >> $output_objdir/$soname.def;

+          fi~

+          $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'

+        else

+          _LT_TAGVAR(ld_shlibs, $1)=no

+        fi

+        ;;

+      darwin* | rhapsody*)

+        _LT_DARWIN_LINKER_FEATURES($1)

+	;;

+

+      dgux*)

+        case $cc_basename in

+          ec++*)

+	    # FIXME: insert proper C++ library support

+	    _LT_TAGVAR(ld_shlibs, $1)=no

+	    ;;

+          ghcx*)

+	    # Green Hills C++ Compiler

+	    # FIXME: insert proper C++ library support

+	    _LT_TAGVAR(ld_shlibs, $1)=no

+	    ;;

+          *)

+	    # FIXME: insert proper C++ library support

+	    _LT_TAGVAR(ld_shlibs, $1)=no

+	    ;;

+        esac

+        ;;

+

+      freebsd[[12]]*)

+        # C++ shared libraries reported to be fairly broken before

+	# switch to ELF

+        _LT_TAGVAR(ld_shlibs, $1)=no

+        ;;

+

+      freebsd-elf*)

+        _LT_TAGVAR(archive_cmds_need_lc, $1)=no

+        ;;

+

+      freebsd* | dragonfly*)

+        # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF

+        # conventions

+        _LT_TAGVAR(ld_shlibs, $1)=yes

+        ;;

+

+      gnu*)

+        ;;

+

+      hpux9*)

+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'

+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:

+        _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'

+        _LT_TAGVAR(hardcode_direct, $1)=yes

+        _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,

+				             # but as the default

+				             # location of the library.

+

+        case $cc_basename in

+          CC*)

+            # FIXME: insert proper C++ library support

+            _LT_TAGVAR(ld_shlibs, $1)=no

+            ;;

+          aCC*)

+            _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'

+            # Commands to make compiler produce verbose output that lists

+            # what "hidden" libraries, object files and flags are used when

+            # linking a shared library.

+            #

+            # There doesn't appear to be a way to prevent this compiler from

+            # explicitly linking system object files so we need to strip them

+            # from the output so that they don't get included in the library

+            # dependencies.

+            output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'

+            ;;

+          *)

+            if test "$GXX" = yes; then

+              _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'

+            else

+              # FIXME: insert proper C++ library support

+              _LT_TAGVAR(ld_shlibs, $1)=no

+            fi

+            ;;

+        esac

+        ;;

+

+      hpux10*|hpux11*)

+        if test $with_gnu_ld = no; then

+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'

+	  _LT_TAGVAR(hardcode_libdir_separator, $1)=:

+

+          case $host_cpu in

+            hppa*64*|ia64*)

+              ;;

+            *)

+	      _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'

+              ;;

+          esac

+        fi

+        case $host_cpu in

+          hppa*64*|ia64*)

+            _LT_TAGVAR(hardcode_direct, $1)=no

+            _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+            ;;

+          *)

+            _LT_TAGVAR(hardcode_direct, $1)=yes

+            _LT_TAGVAR(hardcode_direct_absolute, $1)=yes

+            _LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,

+					         # but as the default

+					         # location of the library.

+            ;;

+        esac

+

+        case $cc_basename in

+          CC*)

+	    # FIXME: insert proper C++ library support

+	    _LT_TAGVAR(ld_shlibs, $1)=no

+	    ;;

+          aCC*)

+	    case $host_cpu in

+	      hppa*64*)

+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'

+	        ;;

+	      ia64*)

+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'

+	        ;;

+	      *)

+	        _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'

+	        ;;

+	    esac

+	    # Commands to make compiler produce verbose output that lists

+	    # what "hidden" libraries, object files and flags are used when

+	    # linking a shared library.

+	    #

+	    # There doesn't appear to be a way to prevent this compiler from

+	    # explicitly linking system object files so we need to strip them

+	    # from the output so that they don't get included in the library

+	    # dependencies.

+	    output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'

+	    ;;

+          *)

+	    if test "$GXX" = yes; then

+	      if test $with_gnu_ld = no; then

+	        case $host_cpu in

+	          hppa*64*)

+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'

+	            ;;

+	          ia64*)

+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'

+	            ;;

+	          *)

+	            _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'

+	            ;;

+	        esac

+	      fi

+	    else

+	      # FIXME: insert proper C++ library support

+	      _LT_TAGVAR(ld_shlibs, $1)=no

+	    fi

+	    ;;

+        esac

+        ;;

+

+      interix[[3-9]]*)

+	_LT_TAGVAR(hardcode_direct, $1)=no

+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'

+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'

+	# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.

+	# Instead, shared libraries are loaded at an image base (0x10000000 by

+	# default) and relocated if they conflict, which is a slow very memory

+	# consuming and fragmenting process.  To avoid this, we pick a random,

+	# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link

+	# time.  Moving up from 0x10000000 also allows more sbrk(2) space.

+	_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'

+	_LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'

+	;;

+      irix5* | irix6*)

+        case $cc_basename in

+          CC*)

+	    # SGI C++

+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'

+

+	    # Archives containing C++ object files must be created using

+	    # "CC -ar", where "CC" is the IRIX C++ compiler.  This is

+	    # necessary to make sure instantiated templates are included

+	    # in the archive.

+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'

+	    ;;

+          *)

+	    if test "$GXX" = yes; then

+	      if test "$with_gnu_ld" = no; then

+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'

+	      else

+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` -o $lib'

+	      fi

+	    fi

+	    _LT_TAGVAR(link_all_deplibs, $1)=yes

+	    ;;

+        esac

+        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'

+        _LT_TAGVAR(hardcode_libdir_separator, $1)=:

+        _LT_TAGVAR(inherit_rpath, $1)=yes

+        ;;

+

+      linux* | k*bsd*-gnu | kopensolaris*-gnu)

+        case $cc_basename in

+          KCC*)

+	    # Kuck and Associates, Inc. (KAI) C++ Compiler

+

+	    # KCC will only create a shared library if the output file

+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library

+	    # to its proper name (with version) after linking.

+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'

+	    _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'

+	    # Commands to make compiler produce verbose output that lists

+	    # what "hidden" libraries, object files and flags are used when

+	    # linking a shared library.

+	    #

+	    # There doesn't appear to be a way to prevent this compiler from

+	    # explicitly linking system object files so we need to strip them

+	    # from the output so that they don't get included in the library

+	    # dependencies.

+	    output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'

+

+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'

+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'

+

+	    # Archives containing C++ object files must be created using

+	    # "CC -Bstatic", where "CC" is the KAI C++ compiler.

+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs'

+	    ;;

+	  icpc* | ecpc* )

+	    # Intel C++

+	    with_gnu_ld=yes

+	    # version 8.0 and above of icpc choke on multiply defined symbols

+	    # if we add $predep_objects and $postdep_objects, however 7.1 and

+	    # earlier do not add the objects themselves.

+	    case `$CC -V 2>&1` in

+	      *"Version 7."*)

+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'

+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'

+		;;

+	      *)  # Version 8.0 or newer

+	        tmp_idyn=

+	        case $host_cpu in

+		  ia64*) tmp_idyn=' -i_dynamic';;

+		esac

+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'

+		_LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'

+		;;

+	    esac

+	    _LT_TAGVAR(archive_cmds_need_lc, $1)=no

+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'

+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'

+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'

+	    ;;

+          pgCC* | pgcpp*)

+            # Portland Group C++ compiler

+	    case `$CC -V` in

+	    *pgCC\ [[1-5]]* | *pgcpp\ [[1-5]]*)

+	      _LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~

+		rm -rf $tpldir~

+		$CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~

+		compile_command="$compile_command `find $tpldir -name \*.o | $NL2SP`"'

+	      _LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~

+		rm -rf $tpldir~

+		$CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~

+		$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | $NL2SP`~

+		$RANLIB $oldlib'

+	      _LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~

+		rm -rf $tpldir~

+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~

+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'

+	      _LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~

+		rm -rf $tpldir~

+		$CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~

+		$CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'

+	      ;;

+	    *) # Version 6 will use weak symbols

+	      _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'

+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'

+	      ;;

+	    esac

+

+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'

+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'

+	    _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test  -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'

+            ;;

+	  cxx*)

+	    # Compaq C++

+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'

+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname  -o $lib ${wl}-retain-symbols-file $wl$export_symbols'

+

+	    runpath_var=LD_RUN_PATH

+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'

+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:

+

+	    # Commands to make compiler produce verbose output that lists

+	    # what "hidden" libraries, object files and flags are used when

+	    # linking a shared library.

+	    #

+	    # There doesn't appear to be a way to prevent this compiler from

+	    # explicitly linking system object files so we need to strip them

+	    # from the output so that they don't get included in the library

+	    # dependencies.

+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'

+	    ;;

+	  xl*)

+	    # IBM XL 8.0 on PPC, with GNU ld

+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'

+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'

+	    _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'

+	    if test "x$supports_anon_versioning" = xyes; then

+	      _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~

+		cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~

+		echo "local: *; };" >> $output_objdir/$libname.ver~

+		$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'

+	    fi

+	    ;;

+	  *)

+	    case `$CC -V 2>&1 | sed 5q` in

+	    *Sun\ C*)

+	      # Sun C++ 5.9

+	      _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'

+	      _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'

+	      _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'

+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'

+	      _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive'

+	      _LT_TAGVAR(compiler_needs_object, $1)=yes

+

+	      # Not sure whether something based on

+	      # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1

+	      # would be better.

+	      output_verbose_link_cmd='echo'

+

+	      # Archives containing C++ object files must be created using

+	      # "CC -xar", where "CC" is the Sun C++ compiler.  This is

+	      # necessary to make sure instantiated templates are included

+	      # in the archive.

+	      _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'

+	      ;;

+	    esac

+	    ;;

+	esac

+	;;

+

+      lynxos*)

+        # FIXME: insert proper C++ library support

+	_LT_TAGVAR(ld_shlibs, $1)=no

+	;;

+

+      m88k*)

+        # FIXME: insert proper C++ library support

+        _LT_TAGVAR(ld_shlibs, $1)=no

+	;;

+

+      mvs*)

+        case $cc_basename in

+          cxx*)

+	    # FIXME: insert proper C++ library support

+	    _LT_TAGVAR(ld_shlibs, $1)=no

+	    ;;

+	  *)

+	    # FIXME: insert proper C++ library support

+	    _LT_TAGVAR(ld_shlibs, $1)=no

+	    ;;

+	esac

+	;;

+

+      netbsd*)

+        if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then

+	  _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'

+	  wlarc=

+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'

+	  _LT_TAGVAR(hardcode_direct, $1)=yes

+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+	fi

+	# Workaround some broken pre-1.5 toolchains

+	output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'

+	;;

+

+      *nto* | *qnx*)

+        _LT_TAGVAR(ld_shlibs, $1)=yes

+	;;

+

+      openbsd2*)

+        # C++ shared libraries are fairly broken

+	_LT_TAGVAR(ld_shlibs, $1)=no

+	;;

+

+      openbsd*)

+	if test -f /usr/libexec/ld.so; then

+	  _LT_TAGVAR(hardcode_direct, $1)=yes

+	  _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+	  _LT_TAGVAR(hardcode_direct_absolute, $1)=yes

+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'

+	  _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'

+	  if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then

+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'

+	    _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'

+	    _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'

+	  fi

+	  output_verbose_link_cmd=echo

+	else

+	  _LT_TAGVAR(ld_shlibs, $1)=no

+	fi

+	;;

+

+      osf3* | osf4* | osf5*)

+        case $cc_basename in

+          KCC*)

+	    # Kuck and Associates, Inc. (KAI) C++ Compiler

+

+	    # KCC will only create a shared library if the output file

+	    # ends with ".so" (or ".sl" for HP-UX), so rename the library

+	    # to its proper name (with version) after linking.

+	    _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'

+

+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'

+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:

+

+	    # Archives containing C++ object files must be created using

+	    # the KAI C++ compiler.

+	    case $host in

+	      osf3*) _LT_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;;

+	      *) _LT_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;;

+	    esac

+	    ;;

+          RCC*)

+	    # Rational C++ 2.4.1

+	    # FIXME: insert proper C++ library support

+	    _LT_TAGVAR(ld_shlibs, $1)=no

+	    ;;

+          cxx*)

+	    case $host in

+	      osf3*)

+	        _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'

+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && $ECHO "X${wl}-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'

+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'

+		;;

+	      *)

+	        _LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'

+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib'

+	        _LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~

+	          echo "-hidden">> $lib.exp~

+	          $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp  `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~

+	          $RM $lib.exp'

+	        _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'

+		;;

+	    esac

+

+	    _LT_TAGVAR(hardcode_libdir_separator, $1)=:

+

+	    # Commands to make compiler produce verbose output that lists

+	    # what "hidden" libraries, object files and flags are used when

+	    # linking a shared library.

+	    #

+	    # There doesn't appear to be a way to prevent this compiler from

+	    # explicitly linking system object files so we need to strip them

+	    # from the output so that they don't get included in the library

+	    # dependencies.

+	    output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`$ECHO "X$templist" | $Xsed -e "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; $ECHO "X$list" | $Xsed'

+	    ;;

+	  *)

+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then

+	      _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'

+	      case $host in

+	        osf3*)

+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'

+		  ;;

+	        *)

+	          _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'

+		  ;;

+	      esac

+

+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'

+	      _LT_TAGVAR(hardcode_libdir_separator, $1)=:

+

+	      # Commands to make compiler produce verbose output that lists

+	      # what "hidden" libraries, object files and flags are used when

+	      # linking a shared library.

+	      output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'

+

+	    else

+	      # FIXME: insert proper C++ library support

+	      _LT_TAGVAR(ld_shlibs, $1)=no

+	    fi

+	    ;;

+        esac

+        ;;

+

+      psos*)

+        # FIXME: insert proper C++ library support

+        _LT_TAGVAR(ld_shlibs, $1)=no

+        ;;

+

+      sunos4*)

+        case $cc_basename in

+          CC*)

+	    # Sun C++ 4.x

+	    # FIXME: insert proper C++ library support

+	    _LT_TAGVAR(ld_shlibs, $1)=no

+	    ;;

+          lcc*)

+	    # Lucid

+	    # FIXME: insert proper C++ library support

+	    _LT_TAGVAR(ld_shlibs, $1)=no

+	    ;;

+          *)

+	    # FIXME: insert proper C++ library support

+	    _LT_TAGVAR(ld_shlibs, $1)=no

+	    ;;

+        esac

+        ;;

+

+      solaris*)

+        case $cc_basename in

+          CC*)

+	    # Sun C++ 4.2, 5.x and Centerline C++

+            _LT_TAGVAR(archive_cmds_need_lc,$1)=yes

+	    _LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'

+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag}  -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'

+	    _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~

+	      $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'

+

+	    _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'

+	    _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+	    case $host_os in

+	      solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;

+	      *)

+		# The compiler driver will combine and reorder linker options,

+		# but understands `-z linker_flag'.

+	        # Supported since Solaris 2.6 (maybe 2.5.1?)

+		_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'

+	        ;;

+	    esac

+	    _LT_TAGVAR(link_all_deplibs, $1)=yes

+

+	    output_verbose_link_cmd='echo'

+

+	    # Archives containing C++ object files must be created using

+	    # "CC -xar", where "CC" is the Sun C++ compiler.  This is

+	    # necessary to make sure instantiated templates are included

+	    # in the archive.

+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs'

+	    ;;

+          gcx*)

+	    # Green Hills C++ Compiler

+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'

+

+	    # The C++ compiler must be used to create the archive.

+	    _LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'

+	    ;;

+          *)

+	    # GNU C++ compiler with Solaris linker

+	    if test "$GXX" = yes && test "$with_gnu_ld" = no; then

+	      _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'

+	      if $CC --version | $GREP -v '^2\.7' > /dev/null; then

+	        _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'

+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~

+		  $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'

+

+	        # Commands to make compiler produce verbose output that lists

+	        # what "hidden" libraries, object files and flags are used when

+	        # linking a shared library.

+	        output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'

+	      else

+	        # g++ 2.7 appears to require `-G' NOT `-shared' on this

+	        # platform.

+	        _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'

+	        _LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~

+		  $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'

+

+	        # Commands to make compiler produce verbose output that lists

+	        # what "hidden" libraries, object files and flags are used when

+	        # linking a shared library.

+	        output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP "\-L"'

+	      fi

+

+	      _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'

+	      case $host_os in

+		solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;

+		*)

+		  _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'

+		  ;;

+	      esac

+	    fi

+	    ;;

+        esac

+        ;;

+

+    sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)

+      _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'

+      _LT_TAGVAR(archive_cmds_need_lc, $1)=no

+      _LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+      runpath_var='LD_RUN_PATH'

+

+      case $cc_basename in

+        CC*)

+	  _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'

+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'

+	  ;;

+	*)

+	  _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'

+	  _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'

+	  ;;

+      esac

+      ;;

+

+      sysv5* | sco3.2v5* | sco5v6*)

+	# Note: We can NOT use -z defs as we might desire, because we do not

+	# link with -lc, and that would cause any symbols used from libc to

+	# always be unresolved, which means just about no library would

+	# ever link correctly.  If we're not using GNU ld we use -z text

+	# though, which does catch some bad symbols but isn't as heavy-handed

+	# as -z defs.

+	_LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'

+	_LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'

+	_LT_TAGVAR(archive_cmds_need_lc, $1)=no

+	_LT_TAGVAR(hardcode_shlibpath_var, $1)=no

+	_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'

+	_LT_TAGVAR(hardcode_libdir_separator, $1)=':'

+	_LT_TAGVAR(link_all_deplibs, $1)=yes

+	_LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'

+	runpath_var='LD_RUN_PATH'

+

+	case $cc_basename in

+          CC*)

+	    _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'

+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'

+	    ;;

+	  *)

+	    _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'

+	    _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'

+	    ;;

+	esac

+      ;;

+

+      tandem*)

+        case $cc_basename in

+          NCC*)

+	    # NonStop-UX NCC 3.20

+	    # FIXME: insert proper C++ library support

+	    _LT_TAGVAR(ld_shlibs, $1)=no

+	    ;;

+          *)

+	    # FIXME: insert proper C++ library support

+	    _LT_TAGVAR(ld_shlibs, $1)=no

+	    ;;

+        esac

+        ;;

+

+      vxworks*)

+        # FIXME: insert proper C++ library support

+        _LT_TAGVAR(ld_shlibs, $1)=no

+        ;;

+

+      *)

+        # FIXME: insert proper C++ library support

+        _LT_TAGVAR(ld_shlibs, $1)=no

+        ;;

+    esac

+

+    AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])

+    test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no

+

+    _LT_TAGVAR(GCC, $1)="$GXX"

+    _LT_TAGVAR(LD, $1)="$LD"

+

+    ## CAVEAT EMPTOR:

+    ## There is no encapsulation within the following macros, do not change

+    ## the running order or otherwise move them around unless you know exactly

+    ## what you are doing...

+    _LT_SYS_HIDDEN_LIBDEPS($1)

+    _LT_COMPILER_PIC($1)

+    _LT_COMPILER_C_O($1)

+    _LT_COMPILER_FILE_LOCKS($1)

+    _LT_LINKER_SHLIBS($1)

+    _LT_SYS_DYNAMIC_LINKER($1)

+    _LT_LINKER_HARDCODE_LIBPATH($1)

+

+    _LT_CONFIG($1)

+  fi # test -n "$compiler"

+

+  CC=$lt_save_CC

+  LDCXX=$LD

+  LD=$lt_save_LD

+  GCC=$lt_save_GCC

+  with_gnu_ld=$lt_save_with_gnu_ld

+  lt_cv_path_LDCXX=$lt_cv_path_LD

+  lt_cv_path_LD=$lt_save_path_LD

+  lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld

+  lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld

+fi # test "$_lt_caught_CXX_error" != yes

+

+AC_LANG_POP

+])# _LT_LANG_CXX_CONFIG

+

+

+# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])

+# ---------------------------------

+# Figure out "hidden" library dependencies from verbose

+# compiler output when linking a shared library.

+# Parse the compiler output and extract the necessary

+# objects, libraries and library flags.

+m4_defun([_LT_SYS_HIDDEN_LIBDEPS],

+[m4_require([_LT_FILEUTILS_DEFAULTS])dnl

+# Dependencies to place before and after the object being linked:

+_LT_TAGVAR(predep_objects, $1)=

+_LT_TAGVAR(postdep_objects, $1)=

+_LT_TAGVAR(predeps, $1)=

+_LT_TAGVAR(postdeps, $1)=

+_LT_TAGVAR(compiler_lib_search_path, $1)=

+

+dnl we can't use the lt_simple_compile_test_code here,

+dnl because it contains code intended for an executable,

+dnl not a library.  It's possible we should let each

+dnl tag define a new lt_????_link_test_code variable,

+dnl but it's only used here...

+m4_if([$1], [], [cat > conftest.$ac_ext <<_LT_EOF

+int a;

+void foo (void) { a = 0; }

+_LT_EOF

+], [$1], [CXX], [cat > conftest.$ac_ext <<_LT_EOF

+class Foo

+{

+public:

+  Foo (void) { a = 0; }

+private:

+  int a;

+};

+_LT_EOF

+], [$1], [F77], [cat > conftest.$ac_ext <<_LT_EOF

+      subroutine foo

+      implicit none

+      integer*4 a

+      a=0

+      return

+      end

+_LT_EOF

+], [$1], [FC], [cat > conftest.$ac_ext <<_LT_EOF

+      subroutine foo

+      implicit none

+      integer a

+      a=0

+      return

+      end

+_LT_EOF

+], [$1], [GCJ], [cat > conftest.$ac_ext <<_LT_EOF

+public class foo {

+  private int a;

+  public void bar (void) {

+    a = 0;

+  }

+};

+_LT_EOF

+])

+dnl Parse the compiler output and extract the necessary

+dnl objects, libraries and library flags.

+if AC_TRY_EVAL(ac_compile); then

+  # Parse the compiler output and extract the necessary

+  # objects, libraries and library flags.

+

+  # Sentinel used to keep track of whether or not we are before

+  # the conftest object file.

+  pre_test_object_deps_done=no

+

+  for p in `eval "$output_verbose_link_cmd"`; do

+    case $p in

+

+    -L* | -R* | -l*)

+       # Some compilers place space between "-{L,R}" and the path.

+       # Remove the space.

+       if test $p = "-L" ||

+          test $p = "-R"; then

+	 prev=$p

+	 continue

+       else

+	 prev=

+       fi

+

+       if test "$pre_test_object_deps_done" = no; then

+	 case $p in

+	 -L* | -R*)

+	   # Internal compiler library paths should come after those

+	   # provided the user.  The postdeps already come after the

+	   # user supplied libs so there is no need to process them.

+	   if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then

+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"

+	   else

+	     _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"

+	   fi

+	   ;;

+	 # The "-l" case would never come before the object being

+	 # linked, so don't bother handling this case.

+	 esac

+       else

+	 if test -z "$_LT_TAGVAR(postdeps, $1)"; then

+	   _LT_TAGVAR(postdeps, $1)="${prev}${p}"

+	 else

+	   _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"

+	 fi

+       fi

+       ;;

+

+    *.$objext)

+       # This assumes that the test object file only shows up

+       # once in the compiler output.

+       if test "$p" = "conftest.$objext"; then

+	 pre_test_object_deps_done=yes

+	 continue

+       fi

+

+       if test "$pre_test_object_deps_done" = no; then

+	 if test -z "$_LT_TAGVAR(predep_objects, $1)"; then

+	   _LT_TAGVAR(predep_objects, $1)="$p"

+	 else

+	   _LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"

+	 fi

+       else

+	 if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then

+	   _LT_TAGVAR(postdep_objects, $1)="$p"

+	 else

+	   _LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"

+	 fi

+       fi

+       ;;

+

+    *) ;; # Ignore the rest.

+

+    esac

+  done

+

+  # Clean up.

+  rm -f a.out a.exe

+else

+  echo "libtool.m4: error: problem compiling $1 test program"

+fi

+

+$RM -f confest.$objext

+

+# PORTME: override above test on systems where it is broken

+m4_if([$1], [CXX],

+[case $host_os in

+interix[[3-9]]*)

+  # Interix 3.5 installs completely hosed .la files for C++, so rather than

+  # hack all around it, let's just trust "g++" to DTRT.

+  _LT_TAGVAR(predep_objects,$1)=

+  _LT_TAGVAR(postdep_objects,$1)=

+  _LT_TAGVAR(postdeps,$1)=

+  ;;

+

+linux*)

+  case `$CC -V 2>&1 | sed 5q` in

+  *Sun\ C*)

+    # Sun C++ 5.9

+

+    # The more standards-conforming stlport4 library is

+    # incompatible with the Cstd library. Avoid specifying

+    # it if it's in CXXFLAGS. Ignore libCrun as

+    # -library=stlport4 depends on it.

+    case " $CXX $CXXFLAGS " in

+    *" -library=stlport4 "*)

+      solaris_use_stlport4=yes

+      ;;

+    esac

+

+    if test "$solaris_use_stlport4" != yes; then

+      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'

+    fi

+    ;;

+  esac

+  ;;

+

+solaris*)

+  case $cc_basename in

+  CC*)

+    # The more standards-conforming stlport4 library is

+    # incompatible with the Cstd library. Avoid specifying

+    # it if it's in CXXFLAGS. Ignore libCrun as

+    # -library=stlport4 depends on it.

+    case " $CXX $CXXFLAGS " in

+    *" -library=stlport4 "*)

+      solaris_use_stlport4=yes

+      ;;

+    esac

+

+    # Adding this requires a known-good setup of shared libraries for

+    # Sun compiler versions before 5.6, else PIC objects from an old

+    # archive will be linked into the output, leading to subtle bugs.

+    if test "$solaris_use_stlport4" != yes; then

+      _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'

+    fi

+    ;;

+  esac

+  ;;

+esac

+])

+

+case " $_LT_TAGVAR(postdeps, $1) " in

+*" -lc "*) _LT_TAGVAR(archive_cmds_need_lc, $1)=no ;;

+esac

+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=

+if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then

+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`

+fi

+_LT_TAGDECL([], [compiler_lib_search_dirs], [1],

+    [The directories searched by this compiler when creating a shared library])

+_LT_TAGDECL([], [predep_objects], [1],

+    [Dependencies to place before and after the objects being linked to

+    create a shared library])

+_LT_TAGDECL([], [postdep_objects], [1])

+_LT_TAGDECL([], [predeps], [1])

+_LT_TAGDECL([], [postdeps], [1])

+_LT_TAGDECL([], [compiler_lib_search_path], [1],

+    [The library search path used internally by the compiler when linking

+    a shared library])

+])# _LT_SYS_HIDDEN_LIBDEPS

+

+

+# _LT_PROG_F77

+# ------------

+# Since AC_PROG_F77 is broken, in that it returns the empty string

+# if there is no fortran compiler, we have our own version here.

+m4_defun([_LT_PROG_F77],

+[

+pushdef([AC_MSG_ERROR], [_lt_disable_F77=yes])

+AC_PROG_F77

+if test -z "$F77" || test "X$F77" = "Xno"; then

+  _lt_disable_F77=yes

+fi

+popdef([AC_MSG_ERROR])

+])# _LT_PROG_F77

+

+dnl aclocal-1.4 backwards compatibility:

+dnl AC_DEFUN([_LT_PROG_F77], [])

+

+

+# _LT_LANG_F77_CONFIG([TAG])

+# --------------------------

+# Ensure that the configuration variables for a Fortran 77 compiler are

+# suitably defined.  These variables are subsequently used by _LT_CONFIG

+# to write the compiler configuration to `libtool'.

+m4_defun([_LT_LANG_F77_CONFIG],

+[AC_REQUIRE([_LT_PROG_F77])dnl

+AC_LANG_PUSH(Fortran 77)

+

+_LT_TAGVAR(archive_cmds_need_lc, $1)=no

+_LT_TAGVAR(allow_undefined_flag, $1)=

+_LT_TAGVAR(always_export_symbols, $1)=no

+_LT_TAGVAR(archive_expsym_cmds, $1)=

+_LT_TAGVAR(export_dynamic_flag_spec, $1)=

+_LT_TAGVAR(hardcode_direct, $1)=no

+_LT_TAGVAR(hardcode_direct_absolute, $1)=no

+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=

+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=

+_LT_TAGVAR(hardcode_libdir_separator, $1)=

+_LT_TAGVAR(hardcode_minus_L, $1)=no

+_LT_TAGVAR(hardcode_automatic, $1)=no

+_LT_TAGVAR(inherit_rpath, $1)=no

+_LT_TAGVAR(module_cmds, $1)=

+_LT_TAGVAR(module_expsym_cmds, $1)=

+_LT_TAGVAR(link_all_deplibs, $1)=unknown

+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds

+_LT_TAGVAR(no_undefined_flag, $1)=

+_LT_TAGVAR(whole_archive_flag_spec, $1)=

+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no

+

+# Source file extension for f77 test sources.

+ac_ext=f

+

+# Object file extension for compiled f77 test sources.

+objext=o

+_LT_TAGVAR(objext, $1)=$objext

+

+# No sense in running all these tests if we already determined that

+# the F77 compiler isn't working.  Some variables (like enable_shared)

+# are currently assumed to apply to all compilers on this platform,

+# and will be corrupted by setting them based on a non-working compiler.

+if test "$_lt_disable_F77" != yes; then

+  # Code to be used in simple compile tests

+  lt_simple_compile_test_code="\

+      subroutine t

+      return

+      end

+"

+

+  # Code to be used in simple link tests

+  lt_simple_link_test_code="\

+      program t

+      end

+"

+

+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.

+  _LT_TAG_COMPILER

+

+  # save warnings/boilerplate of simple test code

+  _LT_COMPILER_BOILERPLATE

+  _LT_LINKER_BOILERPLATE

+

+  # Allow CC to be a program name with arguments.

+  lt_save_CC="$CC"

+  lt_save_GCC=$GCC

+  CC=${F77-"f77"}

+  compiler=$CC

+  _LT_TAGVAR(compiler, $1)=$CC

+  _LT_CC_BASENAME([$compiler])

+  GCC=$G77

+  if test -n "$compiler"; then

+    AC_MSG_CHECKING([if libtool supports shared libraries])

+    AC_MSG_RESULT([$can_build_shared])

+

+    AC_MSG_CHECKING([whether to build shared libraries])

+    test "$can_build_shared" = "no" && enable_shared=no

+

+    # On AIX, shared libraries and static libraries use the same namespace, and

+    # are all built from PIC.

+    case $host_os in

+      aix3*)

+        test "$enable_shared" = yes && enable_static=no

+        if test -n "$RANLIB"; then

+          archive_cmds="$archive_cmds~\$RANLIB \$lib"

+          postinstall_cmds='$RANLIB $lib'

+        fi

+        ;;

+      aix[[4-9]]*)

+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then

+	  test "$enable_shared" = yes && enable_static=no

+	fi

+        ;;

+    esac

+    AC_MSG_RESULT([$enable_shared])

+

+    AC_MSG_CHECKING([whether to build static libraries])

+    # Make sure either enable_shared or enable_static is yes.

+    test "$enable_shared" = yes || enable_static=yes

+    AC_MSG_RESULT([$enable_static])

+

+    _LT_TAGVAR(GCC, $1)="$G77"

+    _LT_TAGVAR(LD, $1)="$LD"

+

+    ## CAVEAT EMPTOR:

+    ## There is no encapsulation within the following macros, do not change

+    ## the running order or otherwise move them around unless you know exactly

+    ## what you are doing...

+    _LT_COMPILER_PIC($1)

+    _LT_COMPILER_C_O($1)

+    _LT_COMPILER_FILE_LOCKS($1)

+    _LT_LINKER_SHLIBS($1)

+    _LT_SYS_DYNAMIC_LINKER($1)

+    _LT_LINKER_HARDCODE_LIBPATH($1)

+

+    _LT_CONFIG($1)

+  fi # test -n "$compiler"

+

+  GCC=$lt_save_GCC

+  CC="$lt_save_CC"

+fi # test "$_lt_disable_F77" != yes

+

+AC_LANG_POP

+])# _LT_LANG_F77_CONFIG

+

+

+# _LT_PROG_FC

+# -----------

+# Since AC_PROG_FC is broken, in that it returns the empty string

+# if there is no fortran compiler, we have our own version here.

+m4_defun([_LT_PROG_FC],

+[

+pushdef([AC_MSG_ERROR], [_lt_disable_FC=yes])

+AC_PROG_FC

+if test -z "$FC" || test "X$FC" = "Xno"; then

+  _lt_disable_FC=yes

+fi

+popdef([AC_MSG_ERROR])

+])# _LT_PROG_FC

+

+dnl aclocal-1.4 backwards compatibility:

+dnl AC_DEFUN([_LT_PROG_FC], [])

+

+

+# _LT_LANG_FC_CONFIG([TAG])

+# -------------------------

+# Ensure that the configuration variables for a Fortran compiler are

+# suitably defined.  These variables are subsequently used by _LT_CONFIG

+# to write the compiler configuration to `libtool'.

+m4_defun([_LT_LANG_FC_CONFIG],

+[AC_REQUIRE([_LT_PROG_FC])dnl

+AC_LANG_PUSH(Fortran)

+

+_LT_TAGVAR(archive_cmds_need_lc, $1)=no

+_LT_TAGVAR(allow_undefined_flag, $1)=

+_LT_TAGVAR(always_export_symbols, $1)=no

+_LT_TAGVAR(archive_expsym_cmds, $1)=

+_LT_TAGVAR(export_dynamic_flag_spec, $1)=

+_LT_TAGVAR(hardcode_direct, $1)=no

+_LT_TAGVAR(hardcode_direct_absolute, $1)=no

+_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=

+_LT_TAGVAR(hardcode_libdir_flag_spec_ld, $1)=

+_LT_TAGVAR(hardcode_libdir_separator, $1)=

+_LT_TAGVAR(hardcode_minus_L, $1)=no

+_LT_TAGVAR(hardcode_automatic, $1)=no

+_LT_TAGVAR(inherit_rpath, $1)=no

+_LT_TAGVAR(module_cmds, $1)=

+_LT_TAGVAR(module_expsym_cmds, $1)=

+_LT_TAGVAR(link_all_deplibs, $1)=unknown

+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds

+_LT_TAGVAR(no_undefined_flag, $1)=

+_LT_TAGVAR(whole_archive_flag_spec, $1)=

+_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=no

+

+# Source file extension for fc test sources.

+ac_ext=${ac_fc_srcext-f}

+

+# Object file extension for compiled fc test sources.

+objext=o

+_LT_TAGVAR(objext, $1)=$objext

+

+# No sense in running all these tests if we already determined that

+# the FC compiler isn't working.  Some variables (like enable_shared)

+# are currently assumed to apply to all compilers on this platform,

+# and will be corrupted by setting them based on a non-working compiler.

+if test "$_lt_disable_FC" != yes; then

+  # Code to be used in simple compile tests

+  lt_simple_compile_test_code="\

+      subroutine t

+      return

+      end

+"

+

+  # Code to be used in simple link tests

+  lt_simple_link_test_code="\

+      program t

+      end

+"

+

+  # ltmain only uses $CC for tagged configurations so make sure $CC is set.

+  _LT_TAG_COMPILER

+

+  # save warnings/boilerplate of simple test code

+  _LT_COMPILER_BOILERPLATE

+  _LT_LINKER_BOILERPLATE

+

+  # Allow CC to be a program name with arguments.

+  lt_save_CC="$CC"

+  lt_save_GCC=$GCC

+  CC=${FC-"f95"}

+  compiler=$CC

+  GCC=$ac_cv_fc_compiler_gnu

+

+  _LT_TAGVAR(compiler, $1)=$CC

+  _LT_CC_BASENAME([$compiler])

+

+  if test -n "$compiler"; then

+    AC_MSG_CHECKING([if libtool supports shared libraries])

+    AC_MSG_RESULT([$can_build_shared])

+

+    AC_MSG_CHECKING([whether to build shared libraries])

+    test "$can_build_shared" = "no" && enable_shared=no

+

+    # On AIX, shared libraries and static libraries use the same namespace, and

+    # are all built from PIC.

+    case $host_os in

+      aix3*)

+        test "$enable_shared" = yes && enable_static=no

+        if test -n "$RANLIB"; then

+          archive_cmds="$archive_cmds~\$RANLIB \$lib"

+          postinstall_cmds='$RANLIB $lib'

+        fi

+        ;;

+      aix[[4-9]]*)

+	if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then

+	  test "$enable_shared" = yes && enable_static=no

+	fi

+        ;;

+    esac

+    AC_MSG_RESULT([$enable_shared])

+

+    AC_MSG_CHECKING([whether to build static libraries])

+    # Make sure either enable_shared or enable_static is yes.

+    test "$enable_shared" = yes || enable_static=yes

+    AC_MSG_RESULT([$enable_static])

+

+    _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"

+    _LT_TAGVAR(LD, $1)="$LD"

+

+    ## CAVEAT EMPTOR:

+    ## There is no encapsulation within the following macros, do not change

+    ## the running order or otherwise move them around unless you know exactly

+    ## what you are doing...

+    _LT_SYS_HIDDEN_LIBDEPS($1)

+    _LT_COMPILER_PIC($1)

+    _LT_COMPILER_C_O($1)

+    _LT_COMPILER_FILE_LOCKS($1)

+    _LT_LINKER_SHLIBS($1)

+    _LT_SYS_DYNAMIC_LINKER($1)

+    _LT_LINKER_HARDCODE_LIBPATH($1)

+

+    _LT_CONFIG($1)

+  fi # test -n "$compiler"

+

+  GCC=$lt_save_GCC

+  CC="$lt_save_CC"

+fi # test "$_lt_disable_FC" != yes

+

+AC_LANG_POP

+])# _LT_LANG_FC_CONFIG

+

+

+# _LT_LANG_GCJ_CONFIG([TAG])

+# --------------------------

+# Ensure that the configuration variables for the GNU Java Compiler compiler

+# are suitably defined.  These variables are subsequently used by _LT_CONFIG

+# to write the compiler configuration to `libtool'.

+m4_defun([_LT_LANG_GCJ_CONFIG],

+[AC_REQUIRE([LT_PROG_GCJ])dnl

+AC_LANG_SAVE

+

+# Source file extension for Java test sources.

+ac_ext=java

+

+# Object file extension for compiled Java test sources.

+objext=o

+_LT_TAGVAR(objext, $1)=$objext

+

+# Code to be used in simple compile tests

+lt_simple_compile_test_code="class foo {}"

+

+# Code to be used in simple link tests

+lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }'

+

+# ltmain only uses $CC for tagged configurations so make sure $CC is set.

+_LT_TAG_COMPILER

+

+# save warnings/boilerplate of simple test code

+_LT_COMPILER_BOILERPLATE

+_LT_LINKER_BOILERPLATE

+

+# Allow CC to be a program name with arguments.

+lt_save_CC="$CC"

+lt_save_GCC=$GCC

+GCC=yes

+CC=${GCJ-"gcj"}

+compiler=$CC

+_LT_TAGVAR(compiler, $1)=$CC

+_LT_TAGVAR(LD, $1)="$LD"

+_LT_CC_BASENAME([$compiler])

+

+# GCJ did not exist at the time GCC didn't implicitly link libc in.

+_LT_TAGVAR(archive_cmds_need_lc, $1)=no

+

+_LT_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds

+

+## CAVEAT EMPTOR:

+## There is no encapsulation within the following macros, do not change

+## the running order or otherwise move them around unless you know exactly

+## what you are doing...

+if test -n "$compiler"; then

+  _LT_COMPILER_NO_RTTI($1)

+  _LT_COMPILER_PIC($1)

+  _LT_COMPILER_C_O($1)

+  _LT_COMPILER_FILE_LOCKS($1)

+  _LT_LINKER_SHLIBS($1)

+  _LT_LINKER_HARDCODE_LIBPATH($1)

+

+  _LT_CONFIG($1)

+fi

+

+AC_LANG_RESTORE

+

+GCC=$lt_save_GCC

+CC="$lt_save_CC"

+])# _LT_LANG_GCJ_CONFIG

+

+

+# _LT_LANG_RC_CONFIG([TAG])

+# -------------------------

+# Ensure that the configuration variables for the Windows resource compiler

+# are suitably defined.  These variables are subsequently used by _LT_CONFIG

+# to write the compiler configuration to `libtool'.

+m4_defun([_LT_LANG_RC_CONFIG],

+[AC_REQUIRE([LT_PROG_RC])dnl

+AC_LANG_SAVE

+

+# Source file extension for RC test sources.

+ac_ext=rc

+

+# Object file extension for compiled RC test sources.

+objext=o

+_LT_TAGVAR(objext, $1)=$objext

+

+# Code to be used in simple compile tests

+lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'

+

+# Code to be used in simple link tests

+lt_simple_link_test_code="$lt_simple_compile_test_code"

+

+# ltmain only uses $CC for tagged configurations so make sure $CC is set.

+_LT_TAG_COMPILER

+

+# save warnings/boilerplate of simple test code

+_LT_COMPILER_BOILERPLATE

+_LT_LINKER_BOILERPLATE

+

+# Allow CC to be a program name with arguments.

+lt_save_CC="$CC"

+lt_save_GCC=$GCC

+GCC=

+CC=${RC-"windres"}

+compiler=$CC

+_LT_TAGVAR(compiler, $1)=$CC

+_LT_CC_BASENAME([$compiler])

+_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes

+

+if test -n "$compiler"; then

+  :

+  _LT_CONFIG($1)

+fi

+

+GCC=$lt_save_GCC

+AC_LANG_RESTORE

+CC="$lt_save_CC"

+])# _LT_LANG_RC_CONFIG

+

+

+# LT_PROG_GCJ

+# -----------

+AC_DEFUN([LT_PROG_GCJ],

+[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],

+  [m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],

+    [AC_CHECK_TOOL(GCJ, gcj,)

+      test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"

+      AC_SUBST(GCJFLAGS)])])[]dnl

+])

+

+# Old name:

+AU_ALIAS([LT_AC_PROG_GCJ], [LT_PROG_GCJ])

+dnl aclocal-1.4 backwards compatibility:

+dnl AC_DEFUN([LT_AC_PROG_GCJ], [])

+

+

+# LT_PROG_RC

+# ----------

+AC_DEFUN([LT_PROG_RC],

+[AC_CHECK_TOOL(RC, windres,)

+])

+

+# Old name:

+AU_ALIAS([LT_AC_PROG_RC], [LT_PROG_RC])

+dnl aclocal-1.4 backwards compatibility:

+dnl AC_DEFUN([LT_AC_PROG_RC], [])

+

+

+# _LT_DECL_EGREP

+# --------------

+# If we don't have a new enough Autoconf to choose the best grep

+# available, choose the one first in the user's PATH.

+m4_defun([_LT_DECL_EGREP],

+[AC_REQUIRE([AC_PROG_EGREP])dnl

+AC_REQUIRE([AC_PROG_FGREP])dnl

+test -z "$GREP" && GREP=grep

+_LT_DECL([], [GREP], [1], [A grep program that handles long lines])

+_LT_DECL([], [EGREP], [1], [An ERE matcher])

+_LT_DECL([], [FGREP], [1], [A literal string matcher])

+dnl Non-bleeding-edge autoconf doesn't subst GREP, so do it here too

+AC_SUBST([GREP])

+])

+

+

+# _LT_DECL_OBJDUMP

+# --------------

+# If we don't have a new enough Autoconf to choose the best objdump

+# available, choose the one first in the user's PATH.

+m4_defun([_LT_DECL_OBJDUMP],

+[AC_CHECK_TOOL(OBJDUMP, objdump, false)

+test -z "$OBJDUMP" && OBJDUMP=objdump

+_LT_DECL([], [OBJDUMP], [1], [An object symbol dumper])

+AC_SUBST([OBJDUMP])

+])

+

+

+# _LT_DECL_SED

+# ------------

+# Check for a fully-functional sed program, that truncates

+# as few characters as possible.  Prefer GNU sed if found.

+m4_defun([_LT_DECL_SED],

+[AC_PROG_SED

+test -z "$SED" && SED=sed

+Xsed="$SED -e 1s/^X//"

+_LT_DECL([], [SED], [1], [A sed program that does not truncate output])

+_LT_DECL([], [Xsed], ["\$SED -e 1s/^X//"],

+    [Sed that helps us avoid accidentally triggering echo(1) options like -n])

+])# _LT_DECL_SED

+

+m4_ifndef([AC_PROG_SED], [

+############################################################

+# NOTE: This macro has been submitted for inclusion into   #

+#  GNU Autoconf as AC_PROG_SED.  When it is available in   #

+#  a released version of Autoconf we should remove this    #

+#  macro and use it instead.                               #

+############################################################

+

+m4_defun([AC_PROG_SED],

+[AC_MSG_CHECKING([for a sed that does not truncate output])

+AC_CACHE_VAL(lt_cv_path_SED,

+[# Loop through the user's path and test for sed and gsed.

+# Then use that list of sed's as ones to test for truncation.

+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR

+for as_dir in $PATH

+do

+  IFS=$as_save_IFS

+  test -z "$as_dir" && as_dir=.

+  for lt_ac_prog in sed gsed; do

+    for ac_exec_ext in '' $ac_executable_extensions; do

+      if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then

+        lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"

+      fi

+    done

+  done

+done

+IFS=$as_save_IFS

+lt_ac_max=0

+lt_ac_count=0

+# Add /usr/xpg4/bin/sed as it is typically found on Solaris

+# along with /bin/sed that truncates output.

+for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do

+  test ! -f $lt_ac_sed && continue

+  cat /dev/null > conftest.in

+  lt_ac_count=0

+  echo $ECHO_N "0123456789$ECHO_C" >conftest.in

+  # Check for GNU sed and select it if it is found.

+  if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then

+    lt_cv_path_SED=$lt_ac_sed

+    break

+  fi

+  while true; do

+    cat conftest.in conftest.in >conftest.tmp

+    mv conftest.tmp conftest.in

+    cp conftest.in conftest.nl

+    echo >>conftest.nl

+    $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break

+    cmp -s conftest.out conftest.nl || break

+    # 10000 chars as input seems more than enough

+    test $lt_ac_count -gt 10 && break

+    lt_ac_count=`expr $lt_ac_count + 1`

+    if test $lt_ac_count -gt $lt_ac_max; then

+      lt_ac_max=$lt_ac_count

+      lt_cv_path_SED=$lt_ac_sed

+    fi

+  done

+done

+])

+SED=$lt_cv_path_SED

+AC_SUBST([SED])

+AC_MSG_RESULT([$SED])

+])#AC_PROG_SED

+])#m4_ifndef

+

+# Old name:

+AU_ALIAS([LT_AC_PROG_SED], [AC_PROG_SED])

+dnl aclocal-1.4 backwards compatibility:

+dnl AC_DEFUN([LT_AC_PROG_SED], [])

+

+

+# _LT_CHECK_SHELL_FEATURES

+# ------------------------

+# Find out whether the shell is Bourne or XSI compatible,

+# or has some other useful features.

+m4_defun([_LT_CHECK_SHELL_FEATURES],

+[AC_MSG_CHECKING([whether the shell understands some XSI constructs])

+# Try some XSI features

+xsi_shell=no

+( _lt_dummy="a/b/c"

+  test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \

+      = c,a/b,, \

+    && eval 'test $(( 1 + 1 )) -eq 2 \

+    && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \

+  && xsi_shell=yes

+AC_MSG_RESULT([$xsi_shell])

+_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])

+

+AC_MSG_CHECKING([whether the shell understands "+="])

+lt_shell_append=no

+( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \

+    >/dev/null 2>&1 \

+  && lt_shell_append=yes

+AC_MSG_RESULT([$lt_shell_append])

+_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])

+

+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then

+  lt_unset=unset

+else

+  lt_unset=false

+fi

+_LT_DECL([], [lt_unset], [0], [whether the shell understands "unset"])dnl

+

+# test EBCDIC or ASCII

+case `echo X|tr X '\101'` in

+ A) # ASCII based system

+    # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr

+  lt_SP2NL='tr \040 \012'

+  lt_NL2SP='tr \015\012 \040\040'

+  ;;

+ *) # EBCDIC based system

+  lt_SP2NL='tr \100 \n'

+  lt_NL2SP='tr \r\n \100\100'

+  ;;

+esac

+_LT_DECL([SP2NL], [lt_SP2NL], [1], [turn spaces into newlines])dnl

+_LT_DECL([NL2SP], [lt_NL2SP], [1], [turn newlines into spaces])dnl

+])# _LT_CHECK_SHELL_FEATURES

+

+

+# _LT_PROG_XSI_SHELLFNS

+# ---------------------

+# Bourne and XSI compatible variants of some useful shell functions.

+m4_defun([_LT_PROG_XSI_SHELLFNS],

+[case $xsi_shell in

+  yes)

+    cat << \_LT_EOF >> "$cfgfile"

+

+# func_dirname file append nondir_replacement

+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,

+# otherwise set result to NONDIR_REPLACEMENT.

+func_dirname ()

+{

+  case ${1} in

+    */*) func_dirname_result="${1%/*}${2}" ;;

+    *  ) func_dirname_result="${3}" ;;

+  esac

+}

+

+# func_basename file

+func_basename ()

+{

+  func_basename_result="${1##*/}"

+}

+

+# func_dirname_and_basename file append nondir_replacement

+# perform func_basename and func_dirname in a single function

+# call:

+#   dirname:  Compute the dirname of FILE.  If nonempty,

+#             add APPEND to the result, otherwise set result

+#             to NONDIR_REPLACEMENT.

+#             value returned in "$func_dirname_result"

+#   basename: Compute filename of FILE.

+#             value retuned in "$func_basename_result"

+# Implementation must be kept synchronized with func_dirname

+# and func_basename. For efficiency, we do not delegate to

+# those functions but instead duplicate the functionality here.

+func_dirname_and_basename ()

+{

+  case ${1} in

+    */*) func_dirname_result="${1%/*}${2}" ;;

+    *  ) func_dirname_result="${3}" ;;

+  esac

+  func_basename_result="${1##*/}"

+}

+

+# func_stripname prefix suffix name

+# strip PREFIX and SUFFIX off of NAME.

+# PREFIX and SUFFIX must not contain globbing or regex special

+# characters, hashes, percent signs, but SUFFIX may contain a leading

+# dot (in which case that matches only a dot).

+func_stripname ()

+{

+  # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are

+  # positional parameters, so assign one to ordinary parameter first.

+  func_stripname_result=${3}

+  func_stripname_result=${func_stripname_result#"${1}"}

+  func_stripname_result=${func_stripname_result%"${2}"}

+}

+

+# func_opt_split

+func_opt_split ()

+{

+  func_opt_split_opt=${1%%=*}

+  func_opt_split_arg=${1#*=}

+}

+

+# func_lo2o object

+func_lo2o ()

+{

+  case ${1} in

+    *.lo) func_lo2o_result=${1%.lo}.${objext} ;;

+    *)    func_lo2o_result=${1} ;;

+  esac

+}

+

+# func_xform libobj-or-source

+func_xform ()

+{

+  func_xform_result=${1%.*}.lo

+}

+

+# func_arith arithmetic-term...

+func_arith ()

+{

+  func_arith_result=$(( $[*] ))

+}

+

+# func_len string

+# STRING may not start with a hyphen.

+func_len ()

+{

+  func_len_result=${#1}

+}

+

+_LT_EOF

+    ;;

+  *) # Bourne compatible functions.

+    cat << \_LT_EOF >> "$cfgfile"

+

+# func_dirname file append nondir_replacement

+# Compute the dirname of FILE.  If nonempty, add APPEND to the result,

+# otherwise set result to NONDIR_REPLACEMENT.

+func_dirname ()

+{

+  # Extract subdirectory from the argument.

+  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`

+  if test "X$func_dirname_result" = "X${1}"; then

+    func_dirname_result="${3}"

+  else

+    func_dirname_result="$func_dirname_result${2}"

+  fi

+}

+

+# func_basename file

+func_basename ()

+{

+  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`

+}

+

+dnl func_dirname_and_basename

+dnl A portable version of this function is already defined in general.m4sh

+dnl so there is no need for it here.

+

+# func_stripname prefix suffix name

+# strip PREFIX and SUFFIX off of NAME.

+# PREFIX and SUFFIX must not contain globbing or regex special

+# characters, hashes, percent signs, but SUFFIX may contain a leading

+# dot (in which case that matches only a dot).

+# func_strip_suffix prefix name

+func_stripname ()

+{

+  case ${2} in

+    .*) func_stripname_result=`$ECHO "X${3}" \

+           | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;;

+    *)  func_stripname_result=`$ECHO "X${3}" \

+           | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;;

+  esac

+}

+

+# sed scripts:

+my_sed_long_opt='1s/^\(-[[^=]]*\)=.*/\1/;q'

+my_sed_long_arg='1s/^-[[^=]]*=//'

+

+# func_opt_split

+func_opt_split ()

+{

+  func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"`

+  func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"`

+}

+

+# func_lo2o object

+func_lo2o ()

+{

+  func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"`

+}

+

+# func_xform libobj-or-source

+func_xform ()

+{

+  func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[[^.]]*$/.lo/'`

+}

+

+# func_arith arithmetic-term...

+func_arith ()

+{

+  func_arith_result=`expr "$[@]"`

+}

+

+# func_len string

+# STRING may not start with a hyphen.

+func_len ()

+{

+  func_len_result=`expr "$[1]" : ".*" 2>/dev/null || echo $max_cmd_len`

+}

+

+_LT_EOF

+esac

+

+case $lt_shell_append in

+  yes)

+    cat << \_LT_EOF >> "$cfgfile"

+

+# func_append var value

+# Append VALUE to the end of shell variable VAR.

+func_append ()

+{

+  eval "$[1]+=\$[2]"

+}

+_LT_EOF

+    ;;

+  *)

+    cat << \_LT_EOF >> "$cfgfile"

+

+# func_append var value

+# Append VALUE to the end of shell variable VAR.

+func_append ()

+{

+  eval "$[1]=\$$[1]\$[2]"

+}

+

+_LT_EOF

+    ;;

+  esac

+])