/* ============================================================================ */ /* Copyright (c) 2021, Texas Instruments Incorporated */ /* All rights reserved. */ /* */ /* Redistribution and use in source and binary forms, with or without */ /* modification, are permitted provided that the following conditions */ /* are met: */ /* */ /* * Redistributions of source code must retain the above copyright */ /* notice, this list of conditions and the following disclaimer. */ /* */ /* * Redistributions in binary form must reproduce the above copyright */ /* notice, this list of conditions and the following disclaimer in the */ /* documentation and/or other materials provided with the distribution. */ /* */ /* * Neither the name of Texas Instruments Incorporated nor the names of */ /* its contributors may be used to endorse or promote products derived */ /* from this software without specific prior written permission. */ /* */ /* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" */ /* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, */ /* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR */ /* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR */ /* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, */ /* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, */ /* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; */ /* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, */ /* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR */ /* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */ /* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ /* ============================================================================ */ /* This file supports MSP430G2553 devices. */ /* Version: 1.212 */ /************************************************************ * STANDARD BITS ************************************************************/ /************************************************************ * STATUS REGISTER BITS ************************************************************/ /************************************************************ * PERIPHERAL FILE MAP ************************************************************/ /************************************************************ * SPECIAL FUNCTION REGISTER ADDRESSES + CONTROL BITS ************************************************************/ PROVIDE(IE1 = 0x0000); PROVIDE(IFG1 = 0x0002); PROVIDE(IE2 = 0x0001); PROVIDE(IFG2 = 0x0003); /************************************************************ * ADC10 ************************************************************/ PROVIDE(ADC10DTC0 = 0x0048); PROVIDE(ADC10DTC1 = 0x0049); PROVIDE(ADC10AE0 = 0x004A); PROVIDE(ADC10CTL0 = 0x01B0); PROVIDE(ADC10CTL1 = 0x01B2); PROVIDE(ADC10MEM = 0x01B4); PROVIDE(ADC10SA = 0x01BC); /************************************************************ * Basic Clock Module ************************************************************/ PROVIDE(DCOCTL = 0x0056); PROVIDE(BCSCTL1 = 0x0057); PROVIDE(BCSCTL2 = 0x0058); PROVIDE(BCSCTL3 = 0x0053); /************************************************************ * Comparator A ************************************************************/ PROVIDE(CACTL1 = 0x0059); PROVIDE(CACTL2 = 0x005A); PROVIDE(CAPD = 0x005B); /************************************************************* * Flash Memory *************************************************************/ PROVIDE(FCTL1 = 0x0128); PROVIDE(FCTL2 = 0x012A); PROVIDE(FCTL3 = 0x012C); /************************************************************ * DIGITAL I/O Port1/2 Pull up / Pull down Resistors ************************************************************/ PROVIDE(P1IN = 0x0020); PROVIDE(P1OUT = 0x0021); PROVIDE(P1DIR = 0x0022); PROVIDE(P1IFG = 0x0023); PROVIDE(P1IES = 0x0024); PROVIDE(P1IE = 0x0025); PROVIDE(P1SEL = 0x0026); PROVIDE(P1SEL2 = 0x0041); PROVIDE(P1REN = 0x0027); PROVIDE(P2IN = 0x0028); PROVIDE(P2OUT = 0x0029); PROVIDE(P2DIR = 0x002A); PROVIDE(P2IFG = 0x002B); PROVIDE(P2IES = 0x002C); PROVIDE(P2IE = 0x002D); PROVIDE(P2SEL = 0x002E); PROVIDE(P2SEL2 = 0x0042); PROVIDE(P2REN = 0x002F); /************************************************************ * DIGITAL I/O Port3 Pull up / Pull down Resistors ************************************************************/ PROVIDE(P3IN = 0x0018); PROVIDE(P3OUT = 0x0019); PROVIDE(P3DIR = 0x001A); PROVIDE(P3SEL = 0x001B); PROVIDE(P3SEL2 = 0x0043); PROVIDE(P3REN = 0x0010); /************************************************************ * Timer0_A3 ************************************************************/ PROVIDE(TA0IV = 0x012E); PROVIDE(TA0CTL = 0x0160); PROVIDE(TA0CCTL0 = 0x0162); PROVIDE(TA0CCTL1 = 0x0164); PROVIDE(TA0CCTL2 = 0x0166); PROVIDE(TA0R = 0x0170); PROVIDE(TA0CCR0 = 0x0172); PROVIDE(TA0CCR1 = 0x0174); PROVIDE(TA0CCR2 = 0x0176); /************************************************************ * Timer1_A3 ************************************************************/ PROVIDE(TA1IV = 0x011E); PROVIDE(TA1CTL = 0x0180); PROVIDE(TA1CCTL0 = 0x0182); PROVIDE(TA1CCTL1 = 0x0184); PROVIDE(TA1CCTL2 = 0x0186); PROVIDE(TA1R = 0x0190); PROVIDE(TA1CCR0 = 0x0192); PROVIDE(TA1CCR1 = 0x0194); PROVIDE(TA1CCR2 = 0x0196); /************************************************************ * USCI ************************************************************/ PROVIDE(UCA0CTL0 = 0x0060); PROVIDE(UCA0CTL1 = 0x0061); PROVIDE(UCA0BR0 = 0x0062); PROVIDE(UCA0BR1 = 0x0063); PROVIDE(UCA0MCTL = 0x0064); PROVIDE(UCA0STAT = 0x0065); PROVIDE(UCA0RXBUF = 0x0066); PROVIDE(UCA0TXBUF = 0x0067); PROVIDE(UCA0ABCTL = 0x005D); PROVIDE(UCA0IRTCTL = 0x005E); PROVIDE(UCA0IRRCTL = 0x005F); PROVIDE(UCB0CTL0 = 0x0068); PROVIDE(UCB0CTL1 = 0x0069); PROVIDE(UCB0BR0 = 0x006A); PROVIDE(UCB0BR1 = 0x006B); PROVIDE(UCB0I2CIE = 0x006C); PROVIDE(UCB0STAT = 0x006D); PROVIDE(UCB0RXBUF = 0x006E); PROVIDE(UCB0TXBUF = 0x006F); PROVIDE(UCB0I2COA = 0x0118); PROVIDE(UCB0I2CSA = 0x011A); /************************************************************ * WATCHDOG TIMER ************************************************************/ PROVIDE(WDTCTL = 0x0120); /************************************************************ * Calibration Data in Info Mem ************************************************************/ PROVIDE(CALDCO_16MHZ = 0x10F8); PROVIDE(CALBC1_16MHZ = 0x10F9); PROVIDE(CALDCO_12MHZ = 0x10FA); PROVIDE(CALBC1_12MHZ = 0x10FB); PROVIDE(CALDCO_8MHZ = 0x10FC); PROVIDE(CALBC1_8MHZ = 0x10FD); PROVIDE(CALDCO_1MHZ = 0x10FE); PROVIDE(CALBC1_1MHZ = 0x10FF); /************************************************************ * Calibration Data in Info Mem ************************************************************/ PROVIDE(TLV_CHECKSUM = 0x10C0); PROVIDE(TLV_DCO_30_TAG = 0x10F6); PROVIDE(TLV_DCO_30_LEN = 0x10F7); PROVIDE(TLV_ADC10_1_TAG = 0x10DA); PROVIDE(TLV_ADC10_1_LEN = 0x10DB); /************************************************************ * Interrupt Vectors (offset from 0xFFE0) ************************************************************/ /************************************************************ * End of Modules ************************************************************/