From dc2493e7525bb7633f697ef10f72b72b46222249 Mon Sep 17 00:00:00 2001 From: Andy Belle-Isle Date: Fri, 30 Aug 2019 00:45:36 -0400 Subject: Forget what I said, I just need to change git attributes to mark for vendor --- deps/LuaJIT/src/lj_mcode.c | 381 --------------------------------------------- 1 file changed, 381 deletions(-) delete mode 100644 deps/LuaJIT/src/lj_mcode.c (limited to 'deps/LuaJIT/src/lj_mcode.c') diff --git a/deps/LuaJIT/src/lj_mcode.c b/deps/LuaJIT/src/lj_mcode.c deleted file mode 100644 index 64b0ca9..0000000 --- a/deps/LuaJIT/src/lj_mcode.c +++ /dev/null @@ -1,381 +0,0 @@ -/* -** Machine code management. -** Copyright (C) 2005-2017 Mike Pall. See Copyright Notice in luajit.h -*/ - -#define lj_mcode_c -#define LUA_CORE - -#include "lj_obj.h" -#if LJ_HASJIT -#include "lj_gc.h" -#include "lj_err.h" -#include "lj_jit.h" -#include "lj_mcode.h" -#include "lj_trace.h" -#include "lj_dispatch.h" -#endif -#if LJ_HASJIT || LJ_HASFFI -#include "lj_vm.h" -#endif - -/* -- OS-specific functions ----------------------------------------------- */ - -#if LJ_HASJIT || LJ_HASFFI - -/* Define this if you want to run LuaJIT with Valgrind. */ -#ifdef LUAJIT_USE_VALGRIND -#include -#endif - -#if LJ_TARGET_IOS -void sys_icache_invalidate(void *start, size_t len); -#endif - -/* Synchronize data/instruction cache. */ -void lj_mcode_sync(void *start, void *end) -{ -#ifdef LUAJIT_USE_VALGRIND - VALGRIND_DISCARD_TRANSLATIONS(start, (char *)end-(char *)start); -#endif -#if LJ_TARGET_X86ORX64 - UNUSED(start); UNUSED(end); -#elif LJ_TARGET_IOS - sys_icache_invalidate(start, (char *)end-(char *)start); -#elif LJ_TARGET_PPC - lj_vm_cachesync(start, end); -#elif defined(__GNUC__) - __clear_cache(start, end); -#else -#error "Missing builtin to flush instruction cache" -#endif -} - -#endif - -#if LJ_HASJIT - -#if LJ_TARGET_WINDOWS - -#define WIN32_LEAN_AND_MEAN -#include - -#define MCPROT_RW PAGE_READWRITE -#define MCPROT_RX PAGE_EXECUTE_READ -#define MCPROT_RWX PAGE_EXECUTE_READWRITE - -static void *mcode_alloc_at(jit_State *J, uintptr_t hint, size_t sz, DWORD prot) -{ - void *p = LJ_WIN_VALLOC((void *)hint, sz, - MEM_RESERVE|MEM_COMMIT|MEM_TOP_DOWN, prot); - if (!p && !hint) - lj_trace_err(J, LJ_TRERR_MCODEAL); - return p; -} - -static void mcode_free(jit_State *J, void *p, size_t sz) -{ - UNUSED(J); UNUSED(sz); - VirtualFree(p, 0, MEM_RELEASE); -} - -static int mcode_setprot(void *p, size_t sz, DWORD prot) -{ - DWORD oprot; - return !LJ_WIN_VPROTECT(p, sz, prot, &oprot); -} - -#elif LJ_TARGET_POSIX - -#include - -#ifndef MAP_ANONYMOUS -#define MAP_ANONYMOUS MAP_ANON -#endif - -#define MCPROT_RW (PROT_READ|PROT_WRITE) -#define MCPROT_RX (PROT_READ|PROT_EXEC) -#define MCPROT_RWX (PROT_READ|PROT_WRITE|PROT_EXEC) - -static void *mcode_alloc_at(jit_State *J, uintptr_t hint, size_t sz, int prot) -{ - void *p = mmap((void *)hint, sz, prot, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0); - if (p == MAP_FAILED) { - if (!hint) lj_trace_err(J, LJ_TRERR_MCODEAL); - p = NULL; - } - return p; -} - -static void mcode_free(jit_State *J, void *p, size_t sz) -{ - UNUSED(J); - munmap(p, sz); -} - -static int mcode_setprot(void *p, size_t sz, int prot) -{ - return mprotect(p, sz, prot); -} - -#elif LJ_64 - -#error "Missing OS support for explicit placement of executable memory" - -#else - -/* Fallback allocator. This will fail if memory is not executable by default. */ -#define LUAJIT_UNPROTECT_MCODE -#define MCPROT_RW 0 -#define MCPROT_RX 0 -#define MCPROT_RWX 0 - -static void *mcode_alloc_at(jit_State *J, uintptr_t hint, size_t sz, int prot) -{ - UNUSED(hint); UNUSED(prot); - return lj_mem_new(J->L, sz); -} - -static void mcode_free(jit_State *J, void *p, size_t sz) -{ - lj_mem_free(J2G(J), p, sz); -} - -#endif - -/* -- MCode area protection ----------------------------------------------- */ - -/* Define this ONLY if page protection twiddling becomes a bottleneck. */ -#ifdef LUAJIT_UNPROTECT_MCODE - -/* It's generally considered to be a potential security risk to have -** pages with simultaneous write *and* execute access in a process. -** -** Do not even think about using this mode for server processes or -** apps handling untrusted external data (such as a browser). -** -** The security risk is not in LuaJIT itself -- but if an adversary finds -** any *other* flaw in your C application logic, then any RWX memory page -** simplifies writing an exploit considerably. -*/ -#define MCPROT_GEN MCPROT_RWX -#define MCPROT_RUN MCPROT_RWX - -static void mcode_protect(jit_State *J, int prot) -{ - UNUSED(J); UNUSED(prot); -} - -#else - -/* This is the default behaviour and much safer: -** -** Most of the time the memory pages holding machine code are executable, -** but NONE of them is writable. -** -** The current memory area is marked read-write (but NOT executable) only -** during the short time window while the assembler generates machine code. -*/ -#define MCPROT_GEN MCPROT_RW -#define MCPROT_RUN MCPROT_RX - -/* Protection twiddling failed. Probably due to kernel security. */ -static LJ_NOINLINE void mcode_protfail(jit_State *J) -{ - lua_CFunction panic = J2G(J)->panic; - if (panic) { - lua_State *L = J->L; - setstrV(L, L->top++, lj_err_str(L, LJ_ERR_JITPROT)); - panic(L); - } -} - -/* Change protection of MCode area. */ -static void mcode_protect(jit_State *J, int prot) -{ - if (J->mcprot != prot) { - if (LJ_UNLIKELY(mcode_setprot(J->mcarea, J->szmcarea, prot))) - mcode_protfail(J); - J->mcprot = prot; - } -} - -#endif - -/* -- MCode area allocation ----------------------------------------------- */ - -#if LJ_64 -#define mcode_validptr(p) (p) -#else -#define mcode_validptr(p) ((p) && (uintptr_t)(p) < 0xffff0000) -#endif - -#ifdef LJ_TARGET_JUMPRANGE - -/* Get memory within relative jump distance of our code in 64 bit mode. */ -static void *mcode_alloc(jit_State *J, size_t sz) -{ - /* Target an address in the static assembler code (64K aligned). - ** Try addresses within a distance of target-range/2+1MB..target+range/2-1MB. - ** Use half the jump range so every address in the range can reach any other. - */ -#if LJ_TARGET_MIPS - /* Use the middle of the 256MB-aligned region. */ - uintptr_t target = ((uintptr_t)(void *)lj_vm_exit_handler & - ~(uintptr_t)0x0fffffffu) + 0x08000000u; -#else - uintptr_t target = (uintptr_t)(void *)lj_vm_exit_handler & ~(uintptr_t)0xffff; -#endif - const uintptr_t range = (1u << (LJ_TARGET_JUMPRANGE-1)) - (1u << 21); - /* First try a contiguous area below the last one. */ - uintptr_t hint = J->mcarea ? (uintptr_t)J->mcarea - sz : 0; - int i; - /* Limit probing iterations, depending on the available pool size. */ - for (i = 0; i < LJ_TARGET_JUMPRANGE; i++) { - if (mcode_validptr(hint)) { - void *p = mcode_alloc_at(J, hint, sz, MCPROT_GEN); - - if (mcode_validptr(p) && - ((uintptr_t)p + sz - target < range || target - (uintptr_t)p < range)) - return p; - if (p) mcode_free(J, p, sz); /* Free badly placed area. */ - } - /* Next try probing 64K-aligned pseudo-random addresses. */ - do { - hint = LJ_PRNG_BITS(J, LJ_TARGET_JUMPRANGE-16) << 16; - } while (!(hint + sz < range+range)); - hint = target + hint - range; - } - lj_trace_err(J, LJ_TRERR_MCODEAL); /* Give up. OS probably ignores hints? */ - return NULL; -} - -#else - -/* All memory addresses are reachable by relative jumps. */ -static void *mcode_alloc(jit_State *J, size_t sz) -{ -#if defined(__OpenBSD__) || LJ_TARGET_UWP - /* Allow better executable memory allocation for OpenBSD W^X mode. */ - void *p = mcode_alloc_at(J, 0, sz, MCPROT_RUN); - if (p && mcode_setprot(p, sz, MCPROT_GEN)) { - mcode_free(J, p, sz); - return NULL; - } - return p; -#else - return mcode_alloc_at(J, 0, sz, MCPROT_GEN); -#endif -} - -#endif - -/* -- MCode area management ----------------------------------------------- */ - -/* Allocate a new MCode area. */ -static void mcode_allocarea(jit_State *J) -{ - MCode *oldarea = J->mcarea; - size_t sz = (size_t)J->param[JIT_P_sizemcode] << 10; - sz = (sz + LJ_PAGESIZE-1) & ~(size_t)(LJ_PAGESIZE - 1); - J->mcarea = (MCode *)mcode_alloc(J, sz); - J->szmcarea = sz; - J->mcprot = MCPROT_GEN; - J->mctop = (MCode *)((char *)J->mcarea + J->szmcarea); - J->mcbot = (MCode *)((char *)J->mcarea + sizeof(MCLink)); - ((MCLink *)J->mcarea)->next = oldarea; - ((MCLink *)J->mcarea)->size = sz; - J->szallmcarea += sz; -} - -/* Free all MCode areas. */ -void lj_mcode_free(jit_State *J) -{ - MCode *mc = J->mcarea; - J->mcarea = NULL; - J->szallmcarea = 0; - while (mc) { - MCode *next = ((MCLink *)mc)->next; - mcode_free(J, mc, ((MCLink *)mc)->size); - mc = next; - } -} - -/* -- MCode transactions -------------------------------------------------- */ - -/* Reserve the remainder of the current MCode area. */ -MCode *lj_mcode_reserve(jit_State *J, MCode **lim) -{ - if (!J->mcarea) - mcode_allocarea(J); - else - mcode_protect(J, MCPROT_GEN); - *lim = J->mcbot; - return J->mctop; -} - -/* Commit the top part of the current MCode area. */ -void lj_mcode_commit(jit_State *J, MCode *top) -{ - J->mctop = top; - mcode_protect(J, MCPROT_RUN); -} - -/* Abort the reservation. */ -void lj_mcode_abort(jit_State *J) -{ - if (J->mcarea) - mcode_protect(J, MCPROT_RUN); -} - -/* Set/reset protection to allow patching of MCode areas. */ -MCode *lj_mcode_patch(jit_State *J, MCode *ptr, int finish) -{ -#ifdef LUAJIT_UNPROTECT_MCODE - UNUSED(J); UNUSED(ptr); UNUSED(finish); - return NULL; -#else - if (finish) { - if (J->mcarea == ptr) - mcode_protect(J, MCPROT_RUN); - else if (LJ_UNLIKELY(mcode_setprot(ptr, ((MCLink *)ptr)->size, MCPROT_RUN))) - mcode_protfail(J); - return NULL; - } else { - MCode *mc = J->mcarea; - /* Try current area first to use the protection cache. */ - if (ptr >= mc && ptr < (MCode *)((char *)mc + J->szmcarea)) { - mcode_protect(J, MCPROT_GEN); - return mc; - } - /* Otherwise search through the list of MCode areas. */ - for (;;) { - mc = ((MCLink *)mc)->next; - lua_assert(mc != NULL); - if (ptr >= mc && ptr < (MCode *)((char *)mc + ((MCLink *)mc)->size)) { - if (LJ_UNLIKELY(mcode_setprot(mc, ((MCLink *)mc)->size, MCPROT_GEN))) - mcode_protfail(J); - return mc; - } - } - } -#endif -} - -/* Limit of MCode reservation reached. */ -void lj_mcode_limiterr(jit_State *J, size_t need) -{ - size_t sizemcode, maxmcode; - lj_mcode_abort(J); - sizemcode = (size_t)J->param[JIT_P_sizemcode] << 10; - sizemcode = (sizemcode + LJ_PAGESIZE-1) & ~(size_t)(LJ_PAGESIZE - 1); - maxmcode = (size_t)J->param[JIT_P_maxmcode] << 10; - if ((size_t)need > sizemcode) - lj_trace_err(J, LJ_TRERR_MCODEOV); /* Too long for any area. */ - if (J->szallmcarea + sizemcode > maxmcode) - lj_trace_err(J, LJ_TRERR_MCODEAL); - mcode_allocarea(J); - lj_trace_err(J, LJ_TRERR_MCODELM); /* Retry with new area. */ -} - -#endif -- cgit v1.2.3