1 files changed, 142 insertions, 0 deletions
diff --git a/arduino/libraries/Bluefruit52Lib/examples/Peripheral/bleuart/bleuart.ino b/arduino/libraries/Bluefruit52Lib/examples/Peripheral/bleuart/bleuart.ino
new file mode 100755
index 0000000..55d2b77
--- /dev/null
+++ b/arduino/libraries/Bluefruit52Lib/examples/Peripheral/bleuart/bleuart.ino
@@ -0,0 +1,142 @@
+/*********************************************************************
+ This is an example for our nRF52 based Bluefruit LE modules
+
+ Pick one up today in the adafruit shop!
+
+ Adafruit invests time and resources providing this open source code,
+ please support Adafruit and open-source hardware by purchasing
+ products from Adafruit!
+
+ MIT license, check LICENSE for more information
+ All text above, and the splash screen below must be included in
+ any redistribution
+*********************************************************************/
+#include <bluefruit.h>
+
+// BLE Service
+BLEDis  bledis;  // device information
+BLEUart bleuart; // uart over ble
+BLEBas  blebas;  // battery
+
+void setup()
+{
+  Serial.begin(115200);
+  while ( !Serial ) delay(10);   // for nrf52840 with native usb
+  
+  Serial.println("Bluefruit52 BLEUART Example");
+  Serial.println("---------------------------\n");
+
+  // Setup the BLE LED to be enabled on CONNECT
+  // Note: This is actually the default behaviour, but provided
+  // here in case you want to control this LED manually via PIN 19
+  Bluefruit.autoConnLed(true);
+
+  // Config the peripheral connection with maximum bandwidth 
+  // more SRAM required by SoftDevice
+  // Note: All config***() function must be called before begin()
+  Bluefruit.configPrphBandwidth(BANDWIDTH_MAX);
+
+  Bluefruit.begin();
+  // Set max power. Accepted values are: -40, -30, -20, -16, -12, -8, -4, 0, 4
+  Bluefruit.setTxPower(4);
+  Bluefruit.setName("Bluefruit52");
+  //Bluefruit.setName(getMcuUniqueID()); // useful testing with multiple central connections
+  Bluefruit.setConnectCallback(connect_callback);
+  Bluefruit.setDisconnectCallback(disconnect_callback);
+
+  // Configure and Start Device Information Service
+  bledis.setManufacturer("Adafruit Industries");
+  bledis.setModel("Bluefruit Feather52");
+  bledis.begin();
+
+  // Configure and Start BLE Uart Service
+  bleuart.begin();
+
+  // Start BLE Battery Service
+  blebas.begin();
+  blebas.write(100);
+
+  // Set up and start advertising
+  startAdv();
+
+  Serial.println("Please use Adafruit's Bluefruit LE app to connect in UART mode");
+  Serial.println("Once connected, enter character(s) that you wish to send");
+}
+
+void startAdv(void)
+{
+  // Advertising packet
+  Bluefruit.Advertising.addFlags(BLE_GAP_ADV_FLAGS_LE_ONLY_GENERAL_DISC_MODE);
+  Bluefruit.Advertising.addTxPower();
+
+  // Include bleuart 128-bit uuid
+  Bluefruit.Advertising.addService(bleuart);
+
+  // Secondary Scan Response packet (optional)
+  // Since there is no room for 'Name' in Advertising packet
+  Bluefruit.ScanResponse.addName();
+  
+  /* Start Advertising
+   * - Enable auto advertising if disconnected
+   * - Interval:  fast mode = 20 ms, slow mode = 152.5 ms
+   * - Timeout for fast mode is 30 seconds
+   * - Start(timeout) with timeout = 0 will advertise forever (until connected)
+   * 
+   * For recommended advertising interval
+   * https://developer.apple.com/library/content/qa/qa1931/_index.html   
+   */
+  Bluefruit.Advertising.restartOnDisconnect(true);
+  Bluefruit.Advertising.setInterval(32, 244);    // in unit of 0.625 ms
+  Bluefruit.Advertising.setFastTimeout(30);      // number of seconds in fast mode
+  Bluefruit.Advertising.start(0);                // 0 = Don't stop advertising after n seconds  
+}
+
+void loop()
+{
+  // Forward data from HW Serial to BLEUART
+  while (Serial.available())
+  {
+    // Delay to wait for enough input, since we have a limited transmission buffer
+    delay(2);
+
+    uint8_t buf[64];
+    int count = Serial.readBytes(buf, sizeof(buf));
+    bleuart.write( buf, count );
+  }
+
+  // Forward from BLEUART to HW Serial
+  while ( bleuart.available() )
+  {
+    uint8_t ch;
+    ch = (uint8_t) bleuart.read();
+    Serial.write(ch);
+  }
+
+  // Request CPU to enter low-power mode until an event/interrupt occurs
+  waitForEvent();
+}
+
+// callback invoked when central connects
+void connect_callback(uint16_t conn_handle)
+{
+  char central_name[32] = { 0 };
+  Bluefruit.Gap.getPeerName(conn_handle, central_name, sizeof(central_name));
+
+  Serial.print("Connected to ");
+  Serial.println(central_name);
+}
+
+/**
+ * Callback invoked when a connection is dropped
+ * @param conn_handle connection where this event happens
+ * @param reason is a BLE_HCI_STATUS_CODE which can be found in ble_hci.h
+ * https://github.com/adafruit/Adafruit_nRF52_Arduino/blob/master/cores/nRF5/nordic/softdevice/s140_nrf52_6.1.1_API/include/ble_hci.h
+ */
+void disconnect_callback(uint16_t conn_handle, uint8_t reason)
+{
+  (void) conn_handle;
+  (void) reason;
+
+  Serial.println();
+  Serial.println("Disconnected");
+}