From d2284735eee14f2210d9ee1b77b6cecb02e0589b Mon Sep 17 00:00:00 2001
From: tcsullivan <tullivan99@gmail.com>
Date: Fri, 1 Mar 2019 07:32:32 -0500
Subject: sharp screen working
---
source/sharp/Adafruit_SharpMem.cpp | 315 +++++++++++++++++++++++++++++++++++++
1 file changed, 315 insertions(+)
create mode 100644 source/sharp/Adafruit_SharpMem.cpp
(limited to 'source/sharp/Adafruit_SharpMem.cpp')
diff --git a/source/sharp/Adafruit_SharpMem.cpp b/source/sharp/Adafruit_SharpMem.cpp
new file mode 100644
index 0000000..5e963ff
--- /dev/null
+++ b/source/sharp/Adafruit_SharpMem.cpp
@@ -0,0 +1,315 @@
+/*********************************************************************
+This is an Arduino library for our Monochrome SHARP Memory Displays
+
+ Pick one up today in the adafruit shop!
+ ------> http://www.adafruit.com/products/1393
+
+These displays use SPI to communicate, 3 pins are required to
+interface
+
+Adafruit invests time and resources providing this open source code,
+please support Adafruit and open-source hardware by purchasing
+products from Adafruit!
+
+Written by Limor Fried/Ladyada for Adafruit Industries.
+BSD license, check license.txt for more information
+All text above, and the splash screen must be included in any redistribution
+*********************************************************************/
+
+#include "Adafruit_SharpMem.h"
+
+#ifndef _swap_int16_t
+#define _swap_int16_t(a, b) { int16_t t = a; a = b; b = t; }
+#endif
+#ifndef _swap_uint16_t
+#define _swap_uint16_t(a, b) { uint16_t t = a; a = b; b = t; }
+#endif
+
+/**************************************************************************
+ Sharp Memory Display Connector
+ -----------------------------------------------------------------------
+ Pin Function Notes
+ === ============== ===============================
+ 1 VIN 3.3-5.0V (into LDO supply)
+ 2 3V3 3.3V out
+ 3 GND
+ 4 SCLK Serial Clock
+ 5 MOSI Serial Data Input
+ 6 CS Serial Chip Select
+ 9 EXTMODE COM Inversion Select (Low = SW clock/serial)
+ 7 EXTCOMIN External COM Inversion Signal
+ 8 DISP Display On(High)/Off(Low)
+
+ **************************************************************************/
+
+#define SHARPMEM_BIT_WRITECMD (0x80)
+#define SHARPMEM_BIT_VCOM (0x40)
+#define SHARPMEM_BIT_CLEAR (0x20)
+#define TOGGLE_VCOM do { _sharpmem_vcom = _sharpmem_vcom ? 0x00 : SHARPMEM_BIT_VCOM; } while(0);
+
+byte *sharpmem_buffer;
+
+/* ************* */
+/* CONSTRUCTORS */
+/* ************* */
+Adafruit_SharpMem::Adafruit_SharpMem(uint8_t clk, uint8_t mosi, uint8_t ss, uint16_t width, uint16_t height) :
+Adafruit_GFX(width, height) {
+ _clk = clk;
+ _mosi = mosi;
+ _ss = ss;
+}
+
+boolean Adafruit_SharpMem::begin(void) {
+ // Set pin state before direction to make sure they start this way (no glitching)
+ digitalWrite(_ss, HIGH);
+ digitalWrite(_clk, LOW);
+ digitalWrite(_mosi, HIGH);
+
+ pinMode(_ss, OUTPUT);
+ pinMode(_clk, OUTPUT);
+ pinMode(_mosi, OUTPUT);
+
+#if defined(USE_FAST_PINIO)
+ clkport = portOutputRegister(digitalPinToPort(_clk));
+ clkpinmask = digitalPinToBitMask(_clk);
+ dataport = portOutputRegister(digitalPinToPort(_mosi));
+ datapinmask = digitalPinToBitMask(_mosi);
+#endif
+
+ // Set the vcom bit to a defined state
+ _sharpmem_vcom = SHARPMEM_BIT_VCOM;
+
+
+ sharpmem_buffer = (byte *)malloc((WIDTH * HEIGHT) / 8);
+
+ if (!sharpmem_buffer) return false;
+
+ setRotation(0);
+
+ return true;
+}
+
+/* *************** */
+/* PRIVATE METHODS */
+/* *************** */
+
+
+/**************************************************************************/
+/*!
+ @brief Sends a single byte in pseudo-SPI.
+*/
+/**************************************************************************/
+void Adafruit_SharpMem::sendbyte(uint8_t data)
+{
+ uint8_t i = 0;
+
+ // LCD expects LSB first
+
+#if defined(USE_FAST_PINIO)
+ for (i=0; i<8; i++) {
+ // Make sure clock starts low
+ *clkport &= ~clkpinmask;
+ if (data & 0x80)
+ *dataport |= datapinmask;
+ else
+ *dataport &= ~datapinmask;
+
+ // Clock is active high
+ *clkport |= clkpinmask;
+ data <<= 1;
+ }
+ *clkport &= ~clkpinmask;
+#else
+ for (i=0; i<8; i++) {
+ // Make sure clock starts low
+ digitalWrite(_clk, LOW);
+ if (data & 0x80)
+ digitalWrite(_mosi, HIGH);
+ else
+ digitalWrite(_mosi, LOW);
+
+ // Clock is active high
+ digitalWrite(_clk, HIGH);
+ data <<= 1;
+ }
+ // Make sure clock ends low
+ digitalWrite(_clk, LOW);
+#endif
+}
+
+void Adafruit_SharpMem::sendbyteLSB(uint8_t data)
+{
+ uint8_t i = 0;
+
+ // LCD expects LSB first
+#if defined(USE_FAST_PINIO)
+ for (i=0; i<8; i++) {
+ // Make sure clock starts low
+ *clkport &= ~clkpinmask;
+ if (data & 0x01)
+ *dataport |= datapinmask;
+ else
+ *dataport &= ~datapinmask;
+ // Clock is active high
+ *clkport |= clkpinmask;
+ data >>= 1;
+ }
+ // Make sure clock ends low
+ *clkport &= ~clkpinmask;
+#else
+ for (i=0; i<8; i++)
+ {
+ // Make sure clock starts low
+ digitalWrite(_clk, LOW);
+ if (data & 0x01)
+ digitalWrite(_mosi, HIGH);
+ else
+ digitalWrite(_mosi, LOW);
+ // Clock is active high
+ digitalWrite(_clk, HIGH);
+ data >>= 1;
+ }
+ // Make sure clock ends low
+ digitalWrite(_clk, LOW);
+#endif
+}
+
+/* ************** */
+/* PUBLIC METHODS */
+/* ************** */
+
+// 1<<n is a costly operation on AVR -- table usu. smaller & faster
+static const uint8_t PROGMEM
+ set[] = { 1, 2, 4, 8, 16, 32, 64, 128 },
+ clr[] = { (uint8_t)~1 , (uint8_t)~2 , (uint8_t)~4 , (uint8_t)~8,
+ (uint8_t)~16, (uint8_t)~32, (uint8_t)~64, (uint8_t)~128 };
+
+/**************************************************************************/
+/*!
+ @brief Draws a single pixel in image buffer
+
+ @param[in] x
+ The x position (0 based)
+ @param[in] y
+ The y position (0 based)
+*/
+/**************************************************************************/
+void Adafruit_SharpMem::drawPixel(int16_t x, int16_t y, uint16_t color)
+{
+ if((x < 0) || (x >= _width) || (y < 0) || (y >= _height)) return;
+
+ switch(rotation) {
+ case 1:
+ _swap_int16_t(x, y);
+ x = WIDTH - 1 - x;
+ break;
+ case 2:
+ x = WIDTH - 1 - x;
+ y = HEIGHT - 1 - y;
+ break;
+ case 3:
+ _swap_int16_t(x, y);
+ y = HEIGHT - 1 - y;
+ break;
+ }
+
+ if(color) {
+ sharpmem_buffer[(y * WIDTH + x) / 8] |=
+ pgm_read_byte(&set[x & 7]);
+ } else {
+ sharpmem_buffer[(y * WIDTH + x) / 8] &=
+ pgm_read_byte(&clr[x & 7]);
+ }
+}
+
+/**************************************************************************/
+/*!
+ @brief Gets the value (1 or 0) of the specified pixel from the buffer
+
+ @param[in] x
+ The x position (0 based)
+ @param[in] y
+ The y position (0 based)
+
+ @return 1 if the pixel is enabled, 0 if disabled
+*/
+/**************************************************************************/
+uint8_t Adafruit_SharpMem::getPixel(uint16_t x, uint16_t y)
+{
+ if((x >= _width) || (y >= _height)) return 0; // <0 test not needed, unsigned
+
+ switch(rotation) {
+ case 1:
+ _swap_uint16_t(x, y);
+ x = WIDTH - 1 - x;
+ break;
+ case 2:
+ x = WIDTH - 1 - x;
+ y = HEIGHT - 1 - y;
+ break;
+ case 3:
+ _swap_uint16_t(x, y);
+ y = HEIGHT - 1 - y;
+ break;
+ }
+
+ return sharpmem_buffer[(y * WIDTH + x) / 8] &
+ pgm_read_byte(&set[x & 7]) ? 1 : 0;
+}
+
+/**************************************************************************/
+/*!
+ @brief Clears the screen
+*/
+/**************************************************************************/
+void Adafruit_SharpMem::clearDisplay()
+{
+ memset(sharpmem_buffer, 0xff, (WIDTH * HEIGHT) / 8);
+ // Send the clear screen command rather than doing a HW refresh (quicker)
+ digitalWrite(_ss, HIGH);
+ sendbyte(_sharpmem_vcom | SHARPMEM_BIT_CLEAR);
+ sendbyteLSB(0x00);
+ TOGGLE_VCOM;
+ digitalWrite(_ss, LOW);
+}
+
+/**************************************************************************/
+/*!
+ @brief Renders the contents of the pixel buffer on the LCD
+*/
+/**************************************************************************/
+void Adafruit_SharpMem::refresh(void)
+{
+ uint16_t i, totalbytes, currentline, oldline;
+ totalbytes = (WIDTH * HEIGHT) / 8;
+
+ // Send the write command
+ digitalWrite(_ss, HIGH);
+ sendbyte(SHARPMEM_BIT_WRITECMD | _sharpmem_vcom);
+ TOGGLE_VCOM;
+
+ // Send the address for line 1
+ oldline = currentline = 1;
+ sendbyteLSB(currentline);
+
+ // Send image buffer
+ for (i=0; i<totalbytes; i++)
+ {
+ sendbyteLSB(sharpmem_buffer[i]);
+ currentline = ((i+1)/(WIDTH/8)) + 1;
+ if(currentline != oldline)
+ {
+ // Send end of line and address bytes
+ sendbyteLSB(0x00);
+ if (currentline <= HEIGHT)
+ {
+ sendbyteLSB(currentline);
+ }
+ oldline = currentline;
+ }
+ }
+
+ // Send another trailing 8 bits for the last line
+ sendbyteLSB(0x00);
+ digitalWrite(_ss, LOW);
+}
--
cgit v1.2.3