summaryrefslogtreecommitdiffstats
path: root/Core
diff options
context:
space:
mode:
Diffstat (limited to 'Core')
-rw-r--r--Core/Inc/main.h165
-rw-r--r--Core/Inc/stm32u0xx_hal_conf.h338
-rw-r--r--Core/Inc/stm32u0xx_it.h64
-rw-r--r--Core/Src/.main.c.swpbin0 -> 40960 bytes
-rw-r--r--Core/Src/.stm32u0xx_hal_msp.c.swpbin0 -> 20480 bytes
-rw-r--r--Core/Src/main.c640
-rw-r--r--Core/Src/stm32u0xx_hal_msp.c268
-rw-r--r--Core/Src/stm32u0xx_it.c174
-rw-r--r--Core/Src/syscalls.c176
-rw-r--r--Core/Src/sysmem.c79
-rw-r--r--Core/Src/system_stm32u0xx.c346
11 files changed, 2250 insertions, 0 deletions
diff --git a/Core/Inc/main.h b/Core/Inc/main.h
new file mode 100644
index 0000000..878727c
--- /dev/null
+++ b/Core/Inc/main.h
@@ -0,0 +1,165 @@
+/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file : main.h
+ * @brief : Header for main.c file.
+ * This file contains the common defines of the application.
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2025 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __MAIN_H
+#define __MAIN_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32u0xx_hal.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void Error_Handler(void);
+
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+/* Private defines -----------------------------------------------------------*/
+#define LED_GREEN_Pin GPIO_PIN_13
+#define LED_GREEN_GPIO_Port GPIOC
+#define OSC32_IN_Pin GPIO_PIN_14
+#define OSC32_IN_GPIO_Port GPIOC
+#define OSC32_OUT_Pin GPIO_PIN_15
+#define OSC32_OUT_GPIO_Port GPIOC
+#define OSC_IN_Pin GPIO_PIN_0
+#define OSC_IN_GPIO_Port GPIOF
+#define OSC_OUT_Pin GPIO_PIN_1
+#define OSC_OUT_GPIO_Port GPIOF
+#define Joystick_Pin GPIO_PIN_2
+#define Joystick_GPIO_Port GPIOC
+#define VCP_TX_Pin GPIO_PIN_2
+#define VCP_TX_GPIO_Port GPIOA
+#define VCP_RX_Pin GPIO_PIN_3
+#define VCP_RX_GPIO_Port GPIOA
+#define LED_BLUE_Pin GPIO_PIN_5
+#define LED_BLUE_GPIO_Port GPIOA
+#define SEG0_Pin GPIO_PIN_4
+#define SEG0_GPIO_Port GPIOC
+#define SEG1_Pin GPIO_PIN_5
+#define SEG1_GPIO_Port GPIOC
+#define SEG2_Pin GPIO_PIN_1
+#define SEG2_GPIO_Port GPIOB
+#define LED_RED_Pin GPIO_PIN_2
+#define LED_RED_GPIO_Port GPIOB
+#define SEG3_Pin GPIO_PIN_7
+#define SEG3_GPIO_Port GPIOE
+#define SEG4_Pin GPIO_PIN_8
+#define SEG4_GPIO_Port GPIOE
+#define SEG5_Pin GPIO_PIN_9
+#define SEG5_GPIO_Port GPIOE
+#define SEG6_Pin GPIO_PIN_11
+#define SEG6_GPIO_Port GPIOB
+#define SHIELD_Pin GPIO_PIN_12
+#define SHIELD_GPIO_Port GPIOB
+#define SHIELD_CS_Pin GPIO_PIN_13
+#define SHIELD_CS_GPIO_Port GPIOB
+#define SEG7_Pin GPIO_PIN_14
+#define SEG7_GPIO_Port GPIOB
+#define SEG8_Pin GPIO_PIN_15
+#define SEG8_GPIO_Port GPIOB
+#define SEG9_Pin GPIO_PIN_8
+#define SEG9_GPIO_Port GPIOD
+#define SEG10_Pin GPIO_PIN_9
+#define SEG10_GPIO_Port GPIOD
+#define TEKY_CS_Pin GPIO_PIN_10
+#define TEKY_CS_GPIO_Port GPIOD
+#define TEKY_Pin GPIO_PIN_11
+#define TEKY_GPIO_Port GPIOD
+#define SEG11_Pin GPIO_PIN_12
+#define SEG11_GPIO_Port GPIOD
+#define SEG12_Pin GPIO_PIN_13
+#define SEG12_GPIO_Port GPIOD
+#define SEG13_Pin GPIO_PIN_6
+#define SEG13_GPIO_Port GPIOC
+#define SEG14_Pin GPIO_PIN_8
+#define SEG14_GPIO_Port GPIOC
+#define SEG15_Pin GPIO_PIN_9
+#define SEG15_GPIO_Port GPIOC
+#define COM0_Pin GPIO_PIN_8
+#define COM0_GPIO_Port GPIOA
+#define COM1_Pin GPIO_PIN_9
+#define COM1_GPIO_Port GPIOA
+#define COM2_Pin GPIO_PIN_10
+#define COM2_GPIO_Port GPIOA
+#define USB_DM_Pin GPIO_PIN_11
+#define USB_DM_GPIO_Port GPIOA
+#define USB_DP_Pin GPIO_PIN_12
+#define USB_DP_GPIO_Port GPIOA
+#define SWDIO_Pin GPIO_PIN_13
+#define SWDIO_GPIO_Port GPIOA
+#define SWCLK_Pin GPIO_PIN_14
+#define SWCLK_GPIO_Port GPIOA
+#define SEG16_Pin GPIO_PIN_10
+#define SEG16_GPIO_Port GPIOC
+#define SEG23_Pin GPIO_PIN_11
+#define SEG23_GPIO_Port GPIOC
+#define SEG17_Pin GPIO_PIN_0
+#define SEG17_GPIO_Port GPIOD
+#define SEG18_Pin GPIO_PIN_1
+#define SEG18_GPIO_Port GPIOD
+#define SEG19_Pin GPIO_PIN_3
+#define SEG19_GPIO_Port GPIOD
+#define SEG20_Pin GPIO_PIN_4
+#define SEG20_GPIO_Port GPIOD
+#define SEG21_Pin GPIO_PIN_5
+#define SEG21_GPIO_Port GPIOD
+#define SEG22_Pin GPIO_PIN_6
+#define SEG22_GPIO_Port GPIOD
+#define SDA_Pin GPIO_PIN_7
+#define SDA_GPIO_Port GPIOB
+#define SCL_Pin GPIO_PIN_8
+#define SCL_GPIO_Port GPIOB
+#define COM3_Pin GPIO_PIN_9
+#define COM3_GPIO_Port GPIOB
+
+/* USER CODE BEGIN Private defines */
+
+/* USER CODE END Private defines */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __MAIN_H */
diff --git a/Core/Inc/stm32u0xx_hal_conf.h b/Core/Inc/stm32u0xx_hal_conf.h
new file mode 100644
index 0000000..d8e250f
--- /dev/null
+++ b/Core/Inc/stm32u0xx_hal_conf.h
@@ -0,0 +1,338 @@
+/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file stm32u0xx_hal_conf.h
+ * @author MCD Application Team
+ * @brief HAL configuration file.
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2023 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32U0xx_HAL_CONF_H
+#define __STM32U0xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+ * @brief This is the list of modules to be used in the HAL driver
+ */
+
+#define HAL_MODULE_ENABLED
+/* #define HAL_ADC_MODULE_ENABLED */
+/* #define HAL_COMP_MODULE_ENABLED */
+/* #define HAL_CRC_MODULE_ENABLED */
+/* #define HAL_CRS_MODULE_ENABLED */
+/* #define HAL_CRYP_MODULE_ENABLED */
+/* #define HAL_DAC_MODULE_ENABLED */
+/* #define HAL_I2C_MODULE_ENABLED */
+/* #define HAL_IRDA_MODULE_ENABLED */
+/* #define HAL_IWDG_MODULE_ENABLED */
+/* #define HAL_LCD_MODULE_ENABLED */
+/* #define HAL_LPTIM_MODULE_ENABLED */
+/* #define HAL_OPAMP_MODULE_ENABLED */
+/* #define HAL_PCD_MODULE_ENABLED */
+/* #define HAL_RNG_MODULE_ENABLED */
+/* #define HAL_RTC_MODULE_ENABLED */
+#define HAL_SPI_MODULE_ENABLED
+/* #define HAL_SMARTCARD_MODULE_ENABLED */
+/* #define HAL_TIM_MODULE_ENABLED */
+/* #define HAL_TSC_MODULE_ENABLED */
+#define HAL_UART_MODULE_ENABLED
+/* #define HAL_USART_MODULE_ENABLED */
+/* #define HAL_WWDG_MODULE_ENABLED */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+ * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSE is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSE_VALUE)
+ #define HSE_VALUE 4000000U /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSE_STARTUP_TIMEOUT)
+ #define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+ * @brief Internal Multiple Speed oscillator (MSI) default value.
+ * This value is the default MSI range value after Reset.
+ */
+#if !defined (MSI_VALUE)
+ #define MSI_VALUE 4000000U /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+/**
+ * @brief Internal Multiple Speed oscillator (MSI) default value.
+ * This value is the default MSI range value after Reset.
+ */
+#if !defined (MSI32_VALUE)
+#define MSI32_VALUE 32000000U /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI32_VALUE */
+
+/**
+ * @brief Internal High Speed oscillator (HSI) value.
+ * This value is used by the RCC HAL module to compute the system frequency
+ * (when HSI is used as system clock source, directly or through the PLL).
+ */
+#if !defined (HSI_VALUE)
+ #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+ * @brief Internal High Speed oscillator (HSI48) value for USB FS and RNG.
+ * This internal oscillator is mainly dedicated to provide a high precision clock to
+ * the USB peripheral by means of a special Clock Recovery System (CRS) circuitry.
+ * When the CRS is not used, the HSI48 RC oscillator runs on it default frequency
+ * which is subject to manufacturing process variations.
+ */
+#if !defined (HSI48_VALUE)
+ #define HSI48_VALUE 48000000U /*!< Value of the Internal High Speed oscillator for USB FS/RNG in Hz.
+ The real value my vary depending on manufacturing process variations.*/
+#endif /* HSI48_VALUE */
+
+/**
+ * @brief Internal Low Speed oscillator (LSI) value.
+ */
+#if !defined (LSI_VALUE)
+ #define LSI_VALUE 32000U /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
+ The real value may vary depending on the variations
+ in voltage and temperature.*/
+/**
+ * @brief External Low Speed oscillator (LSE) value.
+ * This value is used by the UART, RTC HAL module to compute the system frequency
+ */
+#if !defined (LSE_VALUE)
+ #define LSE_VALUE 32768U /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+#if !defined (LSE_STARTUP_TIMEOUT)
+ #define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+ === you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+ * @brief This is the HAL system configuration section
+ */
+
+#define VDD_VALUE 3300U /*!< Value of VDD in mv */
+#define TICK_INT_PRIORITY (3U) /*!< tick interrupt priority (lowest by default) */
+#define USE_RTOS 0U
+#define PREFETCH_ENABLE 0U
+#define INSTRUCTION_CACHE_ENABLE 1U
+
+/* ########################## Assert Selection ############################## */
+/**
+ * @brief Uncomment the line below to expanse the "assert_param" macro in the
+ * HAL drivers code
+ */
+
+/* #define USE_FULL_ASSERT 1U */
+
+/* ################## Register callback feature configuration ############### */
+/**
+ * @brief Set below the peripheral configuration to "1U" to add the support
+ * of HAL callback registration/unregistration feature for the HAL
+ * driver(s). This allows user application to provide specific callback
+ * functions thanks to HAL_PPP_RegisterCallback() rather than overwriting
+ * the default weak callback functions (see each stm32n6xx_hal_ppp.h file
+ * for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef
+ * for each PPP peripheral).
+ */
+#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
+#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
+#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
+#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
+#define USE_HAL_IWDG_REGISTER_CALLBACKS 0U /* IWDG register callback disabled */
+#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
+#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */
+#define USE_HAL_LCD_REGISTER_CALLBACKS 0U /* LCD register callback disabled */
+#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
+#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
+#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
+#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
+#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
+#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
+#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
+#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
+
+/* Includes ------------------------------------------------------------------*/
+/**
+ * @brief Include module's header file
+ */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+#include "stm32u0xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+#include "stm32u0xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+#include "stm32u0xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+#include "stm32u0xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+#include "stm32u0xx_hal_adc.h"
+#include "stm32u0xx_hal_adc_ex.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+#include "stm32u0xx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+#include "stm32u0xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRS_MODULE_ENABLED
+#include "stm32u0xx_ll_crs.h"
+#endif /* HAL_CRS_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+#include "stm32u0xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+#include "stm32u0xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+#include "stm32u0xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+#include "stm32u0xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+#include "stm32u0xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+#include "stm32u0xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+#include "stm32u0xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_LCD_MODULE_ENABLED
+#include "stm32u0xx_hal_lcd.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_OPAMP_MODULE_ENABLED
+#include "stm32u0xx_hal_opamp.h"
+#endif /* HAL_OPAMP_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+#include "stm32u0xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+#include "stm32u0xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+#include "stm32u0xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+#include "stm32u0xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+#include "stm32u0xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+#include "stm32u0xx_ll_system.h"
+#include "stm32u0xx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+#include "stm32u0xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+#include "stm32u0xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+#include "stm32u0xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+#include "stm32u0xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+#include "stm32u0xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_LCD_MODULE_ENABLED
+#include "stm32u0xx_hal_lcd.h"
+#endif /* HAL_LCD_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+#include "stm32u0xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief The assert_param macro is used for function's parameters check.
+ * @param expr: If expr is false, it calls assert_failed function
+ * which reports the name of the source file and the source
+ * line number of the call that failed.
+ * If expr is true, it returns no value.
+ * @retval None
+ */
+ #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+ void assert_failed(uint8_t *file, uint32_t line);
+#else
+ #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32U0xx_HAL_CONF_H */
+
diff --git a/Core/Inc/stm32u0xx_it.h b/Core/Inc/stm32u0xx_it.h
new file mode 100644
index 0000000..d134079
--- /dev/null
+++ b/Core/Inc/stm32u0xx_it.h
@@ -0,0 +1,64 @@
+/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file stm32u0xx_it.h
+ * @brief This file contains the headers of the interrupt handlers.
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2025 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32U0xx_IT_H
+#define __STM32U0xx_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void SVC_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+void DMA1_Channel1_IRQHandler(void);
+void DMA1_Channel2_3_IRQHandler(void);
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32U0xx_IT_H */
diff --git a/Core/Src/.main.c.swp b/Core/Src/.main.c.swp
new file mode 100644
index 0000000..f55a6c6
--- /dev/null
+++ b/Core/Src/.main.c.swp
Binary files differ
diff --git a/Core/Src/.stm32u0xx_hal_msp.c.swp b/Core/Src/.stm32u0xx_hal_msp.c.swp
new file mode 100644
index 0000000..e2221e6
--- /dev/null
+++ b/Core/Src/.stm32u0xx_hal_msp.c.swp
Binary files differ
diff --git a/Core/Src/main.c b/Core/Src/main.c
new file mode 100644
index 0000000..18c53ca
--- /dev/null
+++ b/Core/Src/main.c
@@ -0,0 +1,640 @@
+/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file : main.c
+ * @brief : Main program body
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2025 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+#include <stdio.h>
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN PTD */
+
+/* USER CODE END PTD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+
+SPI_HandleTypeDef hspi1;
+DMA_HandleTypeDef hdma_spi1_rx;
+DMA_HandleTypeDef hdma_spi1_tx;
+
+UART_HandleTypeDef huart2;
+
+/* USER CODE BEGIN PV */
+static /*const*/ uint8_t I2S_Frame_Buffer[8] = {
+ 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF
+};
+static uint8_t I2S_Receive_Buffer[2048];
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+void SystemClock_Config(void);
+static void MX_GPIO_Init(void);
+static void MX_DMA_Init(void);
+static void MX_SPI1_Init(void);
+static void MX_USART2_UART_Init(void);
+/* USER CODE BEGIN PFP */
+static HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA_Mixed(
+ SPI_HandleTypeDef *hspi,
+ uint8_t *pTxData,
+ uint8_t *pRxData,
+ uint16_t TxSize,
+ uint16_t RxSize);
+static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma);
+static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma);
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+int __io_putchar(int ch)
+{
+ uint8_t buf = ch;
+ HAL_UART_Transmit(&huart2, &buf, sizeof(buf), HAL_TIMEOUT);
+ return buf;
+}
+/* USER CODE END 0 */
+
+/**
+ * @brief The application entry point.
+ * @retval int
+ */
+int main(void)
+{
+
+ /* USER CODE BEGIN 1 */
+
+ /* USER CODE END 1 */
+
+ /* MCU Configuration--------------------------------------------------------*/
+
+ /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
+ HAL_Init();
+
+ /* USER CODE BEGIN Init */
+
+ /* USER CODE END Init */
+
+ /* Configure the system clock */
+ SystemClock_Config();
+
+ /* USER CODE BEGIN SysInit */
+
+ /* USER CODE END SysInit */
+
+ /* Initialize all configured peripherals */
+ MX_GPIO_Init();
+ MX_DMA_Init();
+ MX_SPI1_Init();
+ MX_USART2_UART_Init();
+ /* USER CODE BEGIN 2 */
+ puts("Hello, world!");
+
+ __enable_irq();
+ HAL_SPI_TransmitReceive_DMA_Mixed(&hspi1,
+ I2S_Frame_Buffer,
+ I2S_Receive_Buffer,
+ sizeof(I2S_Frame_Buffer),
+ sizeof(I2S_Receive_Buffer));
+ /* USER CODE END 2 */
+
+ /* Infinite loop */
+ /* USER CODE BEGIN WHILE */
+ while (1)
+ {
+ /* USER CODE END WHILE */
+ //__WFI();
+ /* USER CODE BEGIN 3 */
+ }
+ /* USER CODE END 3 */
+}
+
+/**
+ * @brief System Clock Configuration
+ * @retval None
+ */
+void SystemClock_Config(void)
+{
+ RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+ RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+
+ /** Configure the main internal regulator output voltage
+ */
+ HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+ /** Initializes the RCC Oscillators according to the specified parameters
+ * in the RCC_OscInitTypeDef structure.
+ */
+ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
+ RCC_OscInitStruct.MSIState = RCC_MSI_ON;
+ RCC_OscInitStruct.MSICalibrationValue = RCC_MSICALIBRATION_DEFAULT;
+ RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_9;
+ RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+ if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+ /** Initializes the CPU, AHB and APB buses clocks
+ */
+ RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
+ |RCC_CLOCKTYPE_PCLK1;
+ RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
+ RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+ RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+
+ if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
+ {
+ Error_Handler();
+ }
+}
+
+/**
+ * @brief SPI1 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_SPI1_Init(void)
+{
+
+ /* USER CODE BEGIN SPI1_Init 0 */
+
+ /* USER CODE END SPI1_Init 0 */
+
+ /* USER CODE BEGIN SPI1_Init 1 */
+
+ /* USER CODE END SPI1_Init 1 */
+ /* SPI1 parameter configuration*/
+ hspi1.Instance = SPI1;
+ hspi1.Init.Mode = SPI_MODE_MASTER;
+ hspi1.Init.Direction = SPI_DIRECTION_2LINES;
+ hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
+ hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
+ hspi1.Init.CLKPhase = SPI_PHASE_1EDGE;
+ hspi1.Init.NSS = SPI_NSS_SOFT;
+ hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8;
+ hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
+ hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
+ hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
+ hspi1.Init.CRCPolynomial = 7;
+ hspi1.Init.CRCLength = SPI_CRC_LENGTH_DATASIZE;
+ hspi1.Init.NSSPMode = SPI_NSS_PULSE_ENABLE;
+ if (HAL_SPI_Init(&hspi1) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN SPI1_Init 2 */
+
+ /* USER CODE END SPI1_Init 2 */
+
+}
+
+/**
+ * @brief USART2 Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_USART2_UART_Init(void)
+{
+
+ /* USER CODE BEGIN USART2_Init 0 */
+
+ /* USER CODE END USART2_Init 0 */
+
+ /* USER CODE BEGIN USART2_Init 1 */
+
+ /* USER CODE END USART2_Init 1 */
+ huart2.Instance = USART2;
+ huart2.Init.BaudRate = 115200;
+ huart2.Init.WordLength = UART_WORDLENGTH_8B;
+ huart2.Init.StopBits = UART_STOPBITS_1;
+ huart2.Init.Parity = UART_PARITY_NONE;
+ huart2.Init.Mode = UART_MODE_TX_RX;
+ huart2.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+ huart2.Init.OverSampling = UART_OVERSAMPLING_16;
+ huart2.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
+ huart2.Init.ClockPrescaler = UART_PRESCALER_DIV1;
+ huart2.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
+ if (HAL_UART_Init(&huart2) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ if (HAL_UARTEx_SetTxFifoThreshold(&huart2, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ if (HAL_UARTEx_SetRxFifoThreshold(&huart2, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ if (HAL_UARTEx_DisableFifoMode(&huart2) != HAL_OK)
+ {
+ Error_Handler();
+ }
+ /* USER CODE BEGIN USART2_Init 2 */
+
+ /* USER CODE END USART2_Init 2 */
+
+}
+
+/**
+ * Enable DMA controller clock
+ */
+static void MX_DMA_Init(void)
+{
+
+ /* DMA controller clock enable */
+ __HAL_RCC_DMA1_CLK_ENABLE();
+
+ /* DMA interrupt init */
+ /* DMA1_Channel1_IRQn interrupt configuration */
+ HAL_NVIC_SetPriority(DMA1_Channel1_IRQn, 0, 0);
+ HAL_NVIC_EnableIRQ(DMA1_Channel1_IRQn);
+ /* DMA1_Channel2_3_IRQn interrupt configuration */
+ HAL_NVIC_SetPriority(DMA1_Channel2_3_IRQn, 0, 0);
+ HAL_NVIC_EnableIRQ(DMA1_Channel2_3_IRQn);
+
+}
+
+/**
+ * @brief GPIO Initialization Function
+ * @param None
+ * @retval None
+ */
+static void MX_GPIO_Init(void)
+{
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+/* USER CODE BEGIN MX_GPIO_Init_1 */
+/* USER CODE END MX_GPIO_Init_1 */
+
+ /* GPIO Ports Clock Enable */
+ __HAL_RCC_GPIOC_CLK_ENABLE();
+ __HAL_RCC_GPIOF_CLK_ENABLE();
+ __HAL_RCC_GPIOA_CLK_ENABLE();
+ __HAL_RCC_GPIOB_CLK_ENABLE();
+ __HAL_RCC_GPIOE_CLK_ENABLE();
+ __HAL_RCC_GPIOD_CLK_ENABLE();
+
+ /*Configure GPIO pin Output Level */
+ HAL_GPIO_WritePin(LED_GREEN_GPIO_Port, LED_GREEN_Pin, GPIO_PIN_RESET);
+
+ /*Configure GPIO pin Output Level */
+ HAL_GPIO_WritePin(LED_BLUE_GPIO_Port, LED_BLUE_Pin, GPIO_PIN_RESET);
+
+ /*Configure GPIO pin Output Level */
+ HAL_GPIO_WritePin(LED_RED_GPIO_Port, LED_RED_Pin, GPIO_PIN_RESET);
+
+ /*Configure GPIO pin : LED_GREEN_Pin */
+ GPIO_InitStruct.Pin = LED_GREEN_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ HAL_GPIO_Init(LED_GREEN_GPIO_Port, &GPIO_InitStruct);
+
+ /*Configure GPIO pin : Joystick_Pin */
+ GPIO_InitStruct.Pin = Joystick_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ HAL_GPIO_Init(Joystick_GPIO_Port, &GPIO_InitStruct);
+
+ /*Configure GPIO pin : LED_BLUE_Pin */
+ GPIO_InitStruct.Pin = LED_BLUE_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ HAL_GPIO_Init(LED_BLUE_GPIO_Port, &GPIO_InitStruct);
+
+ /*Configure GPIO pins : SEG0_Pin SEG1_Pin SEG13_Pin SEG14_Pin
+ SEG15_Pin SEG16_Pin SEG23_Pin */
+ GPIO_InitStruct.Pin = SEG0_Pin|SEG1_Pin|SEG13_Pin|SEG14_Pin
+ |SEG15_Pin|SEG16_Pin|SEG23_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ GPIO_InitStruct.Alternate = GPIO_AF11_LCD;
+ HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
+
+ /*Configure GPIO pins : SEG2_Pin SEG6_Pin SEG7_Pin SEG8_Pin
+ COM3_Pin */
+ GPIO_InitStruct.Pin = SEG2_Pin|SEG6_Pin|SEG7_Pin|SEG8_Pin
+ |COM3_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ GPIO_InitStruct.Alternate = GPIO_AF11_LCD;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+ /*Configure GPIO pin : LED_RED_Pin */
+ GPIO_InitStruct.Pin = LED_RED_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ HAL_GPIO_Init(LED_RED_GPIO_Port, &GPIO_InitStruct);
+
+ /*Configure GPIO pins : SEG3_Pin SEG4_Pin SEG5_Pin */
+ GPIO_InitStruct.Pin = SEG3_Pin|SEG4_Pin|SEG5_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ GPIO_InitStruct.Alternate = GPIO_AF11_LCD;
+ HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
+
+ /*Configure GPIO pins : SHIELD_Pin SHIELD_CS_Pin */
+ GPIO_InitStruct.Pin = SHIELD_Pin|SHIELD_CS_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ GPIO_InitStruct.Alternate = GPIO_AF9_TSC;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+ /*Configure GPIO pins : SEG9_Pin SEG10_Pin SEG11_Pin SEG12_Pin
+ SEG17_Pin SEG18_Pin SEG19_Pin SEG20_Pin
+ SEG21_Pin SEG22_Pin */
+ GPIO_InitStruct.Pin = SEG9_Pin|SEG10_Pin|SEG11_Pin|SEG12_Pin
+ |SEG17_Pin|SEG18_Pin|SEG19_Pin|SEG20_Pin
+ |SEG21_Pin|SEG22_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ GPIO_InitStruct.Alternate = GPIO_AF11_LCD;
+ HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+
+ /*Configure GPIO pins : TEKY_CS_Pin TEKY_Pin */
+ GPIO_InitStruct.Pin = TEKY_CS_Pin|TEKY_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ GPIO_InitStruct.Alternate = GPIO_AF9_TSC;
+ HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
+
+ /*Configure GPIO pins : COM0_Pin COM1_Pin COM2_Pin */
+ GPIO_InitStruct.Pin = COM0_Pin|COM1_Pin|COM2_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ GPIO_InitStruct.Alternate = GPIO_AF11_LCD;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+ /*Configure GPIO pins : USB_DM_Pin USB_DP_Pin */
+ GPIO_InitStruct.Pin = USB_DM_Pin|USB_DP_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+ /*Configure GPIO pins : SDA_Pin SCL_Pin */
+ GPIO_InitStruct.Pin = SDA_Pin|SCL_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ GPIO_InitStruct.Alternate = GPIO_AF4_I2C1;
+ HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+
+/* USER CODE BEGIN MX_GPIO_Init_2 */
+/* USER CODE END MX_GPIO_Init_2 */
+}
+
+/* USER CODE BEGIN 4 */
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA_Mixed(
+ SPI_HandleTypeDef *hspi,
+ uint8_t *pTxData,
+ uint8_t *pRxData,
+ uint16_t TxSize,
+ uint16_t RxSize)
+{
+ uint32_t tmp_mode;
+ HAL_SPI_StateTypeDef tmp_state;
+ HAL_StatusTypeDef errorcode = HAL_OK;
+
+ /* Check rx & tx dma handles */
+ assert_param(IS_SPI_DMA_HANDLE(hspi->hdmarx));
+ assert_param(IS_SPI_DMA_HANDLE(hspi->hdmatx));
+
+ /* Check Direction parameter */
+ assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
+
+ /* Process locked */
+ __HAL_LOCK(hspi);
+
+ /* Init temporary variables */
+ tmp_state = hspi->State;
+ tmp_mode = hspi->Init.Mode;
+
+ if (!((tmp_state == HAL_SPI_STATE_READY) ||
+ ((tmp_mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmp_state == HAL_SPI_STATE_BUSY_RX))))
+ {
+ errorcode = HAL_BUSY;
+ goto error;
+ }
+
+ if ((pTxData == NULL) || (pRxData == NULL) || (TxSize == 0U) || (RxSize == 0U))
+ {
+ errorcode = HAL_ERROR;
+ goto error;
+ }
+
+ /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
+ if (hspi->State != HAL_SPI_STATE_BUSY_RX)
+ {
+ hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
+ }
+
+ /* Set the transaction information */
+ hspi->ErrorCode = HAL_SPI_ERROR_NONE;
+ hspi->pTxBuffPtr = (uint8_t *)pTxData;
+ hspi->TxXferSize = TxSize;
+ hspi->TxXferCount = TxSize;
+ hspi->pRxBuffPtr = (uint8_t *)pRxData;
+ hspi->RxXferSize = RxSize;
+ hspi->RxXferCount = RxSize;
+
+ /* Init field not used in handle to zero */
+ hspi->RxISR = NULL;
+ hspi->TxISR = NULL;
+
+ /* Reset the threshold bit */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX | SPI_CR2_LDMARX);
+
+ /* The packing mode management is enabled by the DMA settings according the spi data size */
+ if (hspi->Init.DataSize > SPI_DATASIZE_8BIT)
+ {
+ /* Set fiforxthreshold according the reception data length: 16bit */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+ }
+ else
+ {
+ /* Set RX Fifo threshold according the reception data length: 8bit */
+ SET_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+
+ if (hspi->hdmatx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)
+ {
+ if ((hspi->TxXferSize & 0x1U) == 0x0U)
+ {
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX);
+ hspi->TxXferCount = hspi->TxXferCount >> 1U;
+ }
+ else
+ {
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMATX);
+ hspi->TxXferCount = (hspi->TxXferCount >> 1U) + 1U;
+ }
+ }
+
+ if (hspi->hdmarx->Init.MemDataAlignment == DMA_MDATAALIGN_HALFWORD)
+ {
+ /* Set RX Fifo threshold according the reception data length: 16bit */
+ CLEAR_BIT(hspi->Instance->CR2, SPI_RXFIFO_THRESHOLD);
+
+ if ((hspi->RxXferCount & 0x1U) == 0x0U)
+ {
+ CLEAR_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX);
+ hspi->RxXferCount = hspi->RxXferCount >> 1U;
+ }
+ else
+ {
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_LDMARX);
+ hspi->RxXferCount = (hspi->RxXferCount >> 1U) + 1U;
+ }
+ }
+ }
+
+ /* Check if we are in Rx only or in Rx/Tx Mode and configure the DMA transfer complete callback */
+ if (hspi->State == HAL_SPI_STATE_BUSY_RX)
+ {
+ while (1); // TODO confirm if can remove
+ }
+ else
+ {
+ /* Set the SPI Tx/Rx DMA Half transfer complete callback */
+ hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt;
+ hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt;
+ }
+
+ /* Set the DMA error callback */
+ hspi->hdmarx->XferErrorCallback = NULL;//SPI_DMAError;
+
+ /* Set the DMA AbortCpltCallback */
+ hspi->hdmarx->XferAbortCallback = NULL;
+
+ /* Enable the Rx DMA Stream/Channel */
+ if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr,
+ hspi->RxXferCount))
+ {
+ /* Update SPI error code */
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA);
+ errorcode = HAL_ERROR;
+
+ goto error;
+ }
+
+ /* Enable Rx DMA Request */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_RXDMAEN);
+
+ /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing
+ is performed in DMA reception complete callback */
+ hspi->hdmatx->XferHalfCpltCallback = NULL;
+ hspi->hdmatx->XferCpltCallback = NULL;
+ hspi->hdmatx->XferErrorCallback = NULL;
+ hspi->hdmatx->XferAbortCallback = NULL;
+
+ /* Enable the Tx DMA Stream/Channel */
+ if (HAL_OK != HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR,
+ hspi->TxXferCount))
+ {
+ /* Update SPI error code */
+ SET_BIT(hspi->ErrorCode, HAL_SPI_ERROR_DMA);
+ errorcode = HAL_ERROR;
+
+ goto error;
+ }
+
+ /* Check if the SPI is already enabled */
+ if ((hspi->Instance->CR1 & SPI_CR1_SPE) != SPI_CR1_SPE)
+ {
+ /* Enable SPI peripheral */
+ __HAL_SPI_ENABLE(hspi);
+ }
+ /* Enable the SPI Error Interrupt Bit */
+ __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_ERR));
+
+ /* Enable Tx DMA Request */
+ SET_BIT(hspi->Instance->CR2, SPI_CR2_TXDMAEN);
+
+error :
+ /* Process Unlocked */
+ __HAL_UNLOCK(hspi);
+ return errorcode;
+}
+
+void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent);
+ (void)hspi;
+
+ puts("hey!\r\n");
+}
+
+void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma)
+{
+ SPI_HandleTypeDef *hspi = (SPI_HandleTypeDef *)(((DMA_HandleTypeDef *)hdma)->Parent);
+ (void)hspi;
+}
+/* USER CODE END 4 */
+
+/**
+ * @brief This function is executed in case of error occurrence.
+ * @retval None
+ */
+void Error_Handler(void)
+{
+ /* USER CODE BEGIN Error_Handler_Debug */
+ /* User can add his own implementation to report the HAL error return state */
+ __disable_irq();
+ while (1)
+ {
+ }
+ /* USER CODE END Error_Handler_Debug */
+}
+
+#ifdef USE_FULL_ASSERT
+/**
+ * @brief Reports the name of the source file and the source line number
+ * where the assert_param error has occurred.
+ * @param file: pointer to the source file name
+ * @param line: assert_param error line source number
+ * @retval None
+ */
+void assert_failed(uint8_t *file, uint32_t line)
+{
+ /* USER CODE BEGIN 6 */
+ /* User can add his own implementation to report the file name and line number,
+ ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+ /* USER CODE END 6 */
+}
+#endif /* USE_FULL_ASSERT */
diff --git a/Core/Src/stm32u0xx_hal_msp.c b/Core/Src/stm32u0xx_hal_msp.c
new file mode 100644
index 0000000..4eb7deb
--- /dev/null
+++ b/Core/Src/stm32u0xx_hal_msp.c
@@ -0,0 +1,268 @@
+/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file stm32u0xx_hal_msp.c
+ * @brief This file provides code for the MSP Initialization
+ * and de-Initialization codes.
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2025 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+extern DMA_HandleTypeDef hdma_spi1_rx;
+
+extern DMA_HandleTypeDef hdma_spi1_tx;
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN Define */
+
+/* USER CODE END Define */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN Macro */
+
+/* USER CODE END Macro */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* External functions --------------------------------------------------------*/
+/* USER CODE BEGIN ExternalFunctions */
+
+/* USER CODE END ExternalFunctions */
+
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+/**
+ * Initializes the Global MSP.
+ */
+void HAL_MspInit(void)
+{
+
+ /* USER CODE BEGIN MspInit 0 */
+
+ /* USER CODE END MspInit 0 */
+
+ __HAL_RCC_PWR_CLK_ENABLE();
+ __HAL_RCC_SYSCFG_CLK_ENABLE();
+
+ /* System interrupt init*/
+
+ /* USER CODE BEGIN MspInit 1 */
+
+ /* USER CODE END MspInit 1 */
+}
+
+/**
+* @brief SPI MSP Initialization
+* This function configures the hardware resources used in this example
+* @param hspi: SPI handle pointer
+* @retval None
+*/
+void HAL_SPI_MspInit(SPI_HandleTypeDef* hspi)
+{
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ if(hspi->Instance==SPI1)
+ {
+ /* USER CODE BEGIN SPI1_MspInit 0 */
+
+ /* USER CODE END SPI1_MspInit 0 */
+ /* Peripheral clock enable */
+ __HAL_RCC_SPI1_CLK_ENABLE();
+
+ __HAL_RCC_GPIOA_CLK_ENABLE();
+ /**SPI1 GPIO Configuration
+ PA1 ------> SPI1_SCK
+ PA6 ------> SPI1_MISO
+ PA7 ------> SPI1_MOSI
+ */
+ GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_6|GPIO_PIN_7;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ GPIO_InitStruct.Alternate = GPIO_AF5_SPI1;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+ /* SPI1 DMA Init */
+ /* SPI1_RX Init */
+ hdma_spi1_rx.Instance = DMA1_Channel1;
+ hdma_spi1_rx.Init.Request = DMA_REQUEST_SPI1_RX;
+ hdma_spi1_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
+ hdma_spi1_rx.Init.PeriphInc = DMA_PINC_DISABLE;
+ hdma_spi1_rx.Init.MemInc = DMA_MINC_ENABLE;
+ hdma_spi1_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
+ hdma_spi1_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
+ hdma_spi1_rx.Init.Mode = DMA_CIRCULAR;
+ hdma_spi1_rx.Init.Priority = DMA_PRIORITY_MEDIUM;
+ if (HAL_DMA_Init(&hdma_spi1_rx) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+ __HAL_LINKDMA(hspi,hdmarx,hdma_spi1_rx);
+
+ /* SPI1_TX Init */
+ hdma_spi1_tx.Instance = DMA1_Channel2;
+ hdma_spi1_tx.Init.Request = DMA_REQUEST_SPI1_TX;
+ hdma_spi1_tx.Init.Direction = DMA_MEMORY_TO_PERIPH;
+ hdma_spi1_tx.Init.PeriphInc = DMA_PINC_DISABLE;
+ hdma_spi1_tx.Init.MemInc = DMA_MINC_ENABLE;
+ hdma_spi1_tx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
+ hdma_spi1_tx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
+ hdma_spi1_tx.Init.Mode = DMA_CIRCULAR;
+ hdma_spi1_tx.Init.Priority = DMA_PRIORITY_MEDIUM;
+ if (HAL_DMA_Init(&hdma_spi1_tx) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+ __HAL_LINKDMA(hspi,hdmatx,hdma_spi1_tx);
+
+ /* USER CODE BEGIN SPI1_MspInit 1 */
+
+ /* USER CODE END SPI1_MspInit 1 */
+
+ }
+
+}
+
+/**
+* @brief SPI MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param hspi: SPI handle pointer
+* @retval None
+*/
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef* hspi)
+{
+ if(hspi->Instance==SPI1)
+ {
+ /* USER CODE BEGIN SPI1_MspDeInit 0 */
+
+ /* USER CODE END SPI1_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_SPI1_CLK_DISABLE();
+
+ /**SPI1 GPIO Configuration
+ PA1 ------> SPI1_SCK
+ PA6 ------> SPI1_MISO
+ PA7 ------> SPI1_MOSI
+ */
+ HAL_GPIO_DeInit(GPIOA, GPIO_PIN_1|GPIO_PIN_6|GPIO_PIN_7);
+
+ /* SPI1 DMA DeInit */
+ HAL_DMA_DeInit(hspi->hdmarx);
+ HAL_DMA_DeInit(hspi->hdmatx);
+ /* USER CODE BEGIN SPI1_MspDeInit 1 */
+
+ /* USER CODE END SPI1_MspDeInit 1 */
+ }
+
+}
+
+/**
+* @brief UART MSP Initialization
+* This function configures the hardware resources used in this example
+* @param huart: UART handle pointer
+* @retval None
+*/
+void HAL_UART_MspInit(UART_HandleTypeDef* huart)
+{
+ GPIO_InitTypeDef GPIO_InitStruct = {0};
+ RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+ if(huart->Instance==USART2)
+ {
+ /* USER CODE BEGIN USART2_MspInit 0 */
+
+ /* USER CODE END USART2_MspInit 0 */
+
+ /** Initializes the peripherals clocks
+ */
+ PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART2;
+ PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
+ if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
+ {
+ Error_Handler();
+ }
+
+ /* Peripheral clock enable */
+ __HAL_RCC_USART2_CLK_ENABLE();
+
+ __HAL_RCC_GPIOA_CLK_ENABLE();
+ /**USART2 GPIO Configuration
+ PA2 ------> USART2_TX
+ PA3 ------> USART2_RX
+ */
+ GPIO_InitStruct.Pin = VCP_TX_Pin|VCP_RX_Pin;
+ GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+ GPIO_InitStruct.Pull = GPIO_NOPULL;
+ GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
+ GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
+ HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+ /* USER CODE BEGIN USART2_MspInit 1 */
+
+ /* USER CODE END USART2_MspInit 1 */
+
+ }
+
+}
+
+/**
+* @brief UART MSP De-Initialization
+* This function freeze the hardware resources used in this example
+* @param huart: UART handle pointer
+* @retval None
+*/
+void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
+{
+ if(huart->Instance==USART2)
+ {
+ /* USER CODE BEGIN USART2_MspDeInit 0 */
+
+ /* USER CODE END USART2_MspDeInit 0 */
+ /* Peripheral clock disable */
+ __HAL_RCC_USART2_CLK_DISABLE();
+
+ /**USART2 GPIO Configuration
+ PA2 ------> USART2_TX
+ PA3 ------> USART2_RX
+ */
+ HAL_GPIO_DeInit(GPIOA, VCP_TX_Pin|VCP_RX_Pin);
+
+ /* USER CODE BEGIN USART2_MspDeInit 1 */
+
+ /* USER CODE END USART2_MspDeInit 1 */
+ }
+
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
diff --git a/Core/Src/stm32u0xx_it.c b/Core/Src/stm32u0xx_it.c
new file mode 100644
index 0000000..78ec492
--- /dev/null
+++ b/Core/Src/stm32u0xx_it.c
@@ -0,0 +1,174 @@
+/* USER CODE BEGIN Header */
+/**
+ ******************************************************************************
+ * @file stm32u0xx_it.c
+ * @brief Interrupt Service Routines.
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2025 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+/* USER CODE END Header */
+
+/* Includes ------------------------------------------------------------------*/
+#include "main.h"
+#include "stm32u0xx_it.h"
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+/* USER CODE END Includes */
+
+/* Private typedef -----------------------------------------------------------*/
+/* USER CODE BEGIN TD */
+
+/* USER CODE END TD */
+
+/* Private define ------------------------------------------------------------*/
+/* USER CODE BEGIN PD */
+
+/* USER CODE END PD */
+
+/* Private macro -------------------------------------------------------------*/
+/* USER CODE BEGIN PM */
+
+/* USER CODE END PM */
+
+/* Private variables ---------------------------------------------------------*/
+/* USER CODE BEGIN PV */
+
+/* USER CODE END PV */
+
+/* Private function prototypes -----------------------------------------------*/
+/* USER CODE BEGIN PFP */
+
+/* USER CODE END PFP */
+
+/* Private user code ---------------------------------------------------------*/
+/* USER CODE BEGIN 0 */
+
+/* USER CODE END 0 */
+
+/* External variables --------------------------------------------------------*/
+extern DMA_HandleTypeDef hdma_spi1_rx;
+extern DMA_HandleTypeDef hdma_spi1_tx;
+/* USER CODE BEGIN EV */
+
+/* USER CODE END EV */
+
+/******************************************************************************/
+/* Cortex Processor Interruption and Exception Handlers */
+/******************************************************************************/
+/**
+ * @brief This function handles Non maskable interrupt.
+ */
+void NMI_Handler(void)
+{
+ /* USER CODE BEGIN NonMaskableInt_IRQn 0 */
+
+ /* USER CODE END NonMaskableInt_IRQn 0 */
+ /* USER CODE BEGIN NonMaskableInt_IRQn 1 */
+ while (1)
+ {
+ }
+ /* USER CODE END NonMaskableInt_IRQn 1 */
+}
+
+/**
+ * @brief This function handles Hard fault interrupt.
+ */
+void HardFault_Handler(void)
+{
+ /* USER CODE BEGIN HardFault_IRQn 0 */
+
+ /* USER CODE END HardFault_IRQn 0 */
+ while (1)
+ {
+ /* USER CODE BEGIN W1_HardFault_IRQn 0 */
+ /* USER CODE END W1_HardFault_IRQn 0 */
+ }
+}
+
+/**
+ * @brief This function handles System service call via SVC instruction.
+ */
+void SVC_Handler(void)
+{
+ /* USER CODE BEGIN SVCall_IRQn 0 */
+
+ /* USER CODE END SVCall_IRQn 0 */
+ /* USER CODE BEGIN SVCall_IRQn 1 */
+
+ /* USER CODE END SVCall_IRQn 1 */
+}
+
+/**
+ * @brief This function handles Pendable request for system service.
+ */
+void PendSV_Handler(void)
+{
+ /* USER CODE BEGIN PendSV_IRQn 0 */
+
+ /* USER CODE END PendSV_IRQn 0 */
+ /* USER CODE BEGIN PendSV_IRQn 1 */
+
+ /* USER CODE END PendSV_IRQn 1 */
+}
+
+/**
+ * @brief This function handles System tick timer.
+ */
+void SysTick_Handler(void)
+{
+ /* USER CODE BEGIN SysTick_IRQn 0 */
+
+ /* USER CODE END SysTick_IRQn 0 */
+ HAL_IncTick();
+ /* USER CODE BEGIN SysTick_IRQn 1 */
+
+ /* USER CODE END SysTick_IRQn 1 */
+}
+
+/******************************************************************************/
+/* STM32U0xx Peripheral Interrupt Handlers */
+/* Add here the Interrupt Handlers for the used peripherals. */
+/* For the available peripheral interrupt handler names, */
+/* please refer to the startup file (startup_stm32u0xx.s). */
+/******************************************************************************/
+
+/**
+ * @brief This function handles DMA1 channel 1 interrupt.
+ */
+void DMA1_Channel1_IRQHandler(void)
+{
+ /* USER CODE BEGIN DMA1_Channel1_IRQn 0 */
+
+ /* USER CODE END DMA1_Channel1_IRQn 0 */
+ HAL_DMA_IRQHandler(&hdma_spi1_rx);
+ /* USER CODE BEGIN DMA1_Channel1_IRQn 1 */
+
+ /* USER CODE END DMA1_Channel1_IRQn 1 */
+}
+
+/**
+ * @brief This function handles DMA1 channel 2 and channel 3 interrupts.
+ */
+void DMA1_Channel2_3_IRQHandler(void)
+{
+ /* USER CODE BEGIN DMA1_Channel2_3_IRQn 0 */
+
+ /* USER CODE END DMA1_Channel2_3_IRQn 0 */
+ HAL_DMA_IRQHandler(&hdma_spi1_tx);
+ /* USER CODE BEGIN DMA1_Channel2_3_IRQn 1 */
+
+ /* USER CODE END DMA1_Channel2_3_IRQn 1 */
+}
+
+/* USER CODE BEGIN 1 */
+
+/* USER CODE END 1 */
diff --git a/Core/Src/syscalls.c b/Core/Src/syscalls.c
new file mode 100644
index 0000000..e33a849
--- /dev/null
+++ b/Core/Src/syscalls.c
@@ -0,0 +1,176 @@
+/**
+ ******************************************************************************
+ * @file syscalls.c
+ * @author Auto-generated by STM32CubeMX
+ * @brief Minimal System calls file
+ *
+ * For more information about which c-functions
+ * need which of these lowlevel functions
+ * please consult the Newlib libc-manual
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2020-2024 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+
+/* Includes */
+#include <sys/stat.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <stdio.h>
+#include <signal.h>
+#include <time.h>
+#include <sys/time.h>
+#include <sys/times.h>
+
+
+/* Variables */
+extern int __io_putchar(int ch) __attribute__((weak));
+extern int __io_getchar(void) __attribute__((weak));
+
+
+char *__env[1] = { 0 };
+char **environ = __env;
+
+
+/* Functions */
+void initialise_monitor_handles()
+{
+}
+
+int _getpid(void)
+{
+ return 1;
+}
+
+int _kill(int pid, int sig)
+{
+ (void)pid;
+ (void)sig;
+ errno = EINVAL;
+ return -1;
+}
+
+void _exit (int status)
+{
+ _kill(status, -1);
+ while (1) {} /* Make sure we hang here */
+}
+
+__attribute__((weak)) int _read(int file, char *ptr, int len)
+{
+ (void)file;
+ int DataIdx;
+
+ for (DataIdx = 0; DataIdx < len; DataIdx++)
+ {
+ *ptr++ = __io_getchar();
+ }
+
+ return len;
+}
+
+__attribute__((weak)) int _write(int file, char *ptr, int len)
+{
+ (void)file;
+ int DataIdx;
+
+ for (DataIdx = 0; DataIdx < len; DataIdx++)
+ {
+ __io_putchar(*ptr++);
+ }
+ return len;
+}
+
+int _close(int file)
+{
+ (void)file;
+ return -1;
+}
+
+
+int _fstat(int file, struct stat *st)
+{
+ (void)file;
+ st->st_mode = S_IFCHR;
+ return 0;
+}
+
+int _isatty(int file)
+{
+ (void)file;
+ return 1;
+}
+
+int _lseek(int file, int ptr, int dir)
+{
+ (void)file;
+ (void)ptr;
+ (void)dir;
+ return 0;
+}
+
+int _open(char *path, int flags, ...)
+{
+ (void)path;
+ (void)flags;
+ /* Pretend like we always fail */
+ return -1;
+}
+
+int _wait(int *status)
+{
+ (void)status;
+ errno = ECHILD;
+ return -1;
+}
+
+int _unlink(char *name)
+{
+ (void)name;
+ errno = ENOENT;
+ return -1;
+}
+
+int _times(struct tms *buf)
+{
+ (void)buf;
+ return -1;
+}
+
+int _stat(char *file, struct stat *st)
+{
+ (void)file;
+ st->st_mode = S_IFCHR;
+ return 0;
+}
+
+int _link(char *old, char *new)
+{
+ (void)old;
+ (void)new;
+ errno = EMLINK;
+ return -1;
+}
+
+int _fork(void)
+{
+ errno = EAGAIN;
+ return -1;
+}
+
+int _execve(char *name, char **argv, char **env)
+{
+ (void)name;
+ (void)argv;
+ (void)env;
+ errno = ENOMEM;
+ return -1;
+}
diff --git a/Core/Src/sysmem.c b/Core/Src/sysmem.c
new file mode 100644
index 0000000..246470e
--- /dev/null
+++ b/Core/Src/sysmem.c
@@ -0,0 +1,79 @@
+/**
+ ******************************************************************************
+ * @file sysmem.c
+ * @author Generated by STM32CubeMX
+ * @brief System Memory calls file
+ *
+ * For more information about which C functions
+ * need which of these lowlevel functions
+ * please consult the newlib libc manual
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2024 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ */
+
+/* Includes */
+#include <errno.h>
+#include <stdint.h>
+
+/**
+ * Pointer to the current high watermark of the heap usage
+ */
+static uint8_t *__sbrk_heap_end = NULL;
+
+/**
+ * @brief _sbrk() allocates memory to the newlib heap and is used by malloc
+ * and others from the C library
+ *
+ * @verbatim
+ * ############################################################################
+ * # .data # .bss # newlib heap # MSP stack #
+ * # # # # Reserved by _Min_Stack_Size #
+ * ############################################################################
+ * ^-- RAM start ^-- _end _estack, RAM end --^
+ * @endverbatim
+ *
+ * This implementation starts allocating at the '_end' linker symbol
+ * The '_Min_Stack_Size' linker symbol reserves a memory for the MSP stack
+ * The implementation considers '_estack' linker symbol to be RAM end
+ * NOTE: If the MSP stack, at any point during execution, grows larger than the
+ * reserved size, please increase the '_Min_Stack_Size'.
+ *
+ * @param incr Memory size
+ * @return Pointer to allocated memory
+ */
+void *_sbrk(ptrdiff_t incr)
+{
+ extern uint8_t _end; /* Symbol defined in the linker script */
+ extern uint8_t _estack; /* Symbol defined in the linker script */
+ extern uint32_t _Min_Stack_Size; /* Symbol defined in the linker script */
+ const uint32_t stack_limit = (uint32_t)&_estack - (uint32_t)&_Min_Stack_Size;
+ const uint8_t *max_heap = (uint8_t *)stack_limit;
+ uint8_t *prev_heap_end;
+
+ /* Initialize heap end at first call */
+ if (NULL == __sbrk_heap_end)
+ {
+ __sbrk_heap_end = &_end;
+ }
+
+ /* Protect heap from growing into the reserved MSP stack */
+ if (__sbrk_heap_end + incr > max_heap)
+ {
+ errno = ENOMEM;
+ return (void *)-1;
+ }
+
+ prev_heap_end = __sbrk_heap_end;
+ __sbrk_heap_end += incr;
+
+ return (void *)prev_heap_end;
+}
diff --git a/Core/Src/system_stm32u0xx.c b/Core/Src/system_stm32u0xx.c
new file mode 100644
index 0000000..0222b0f
--- /dev/null
+++ b/Core/Src/system_stm32u0xx.c
@@ -0,0 +1,346 @@
+/**
+ ******************************************************************************
+ * @file system_stm32u0xx.c
+ * @author MCD Application Team
+ * @brief CMSIS Cortex-M0+ Device Peripheral Access Layer System Source File
+ *
+ ******************************************************************************
+ * @attention
+ *
+ * Copyright (c) 2023 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software is licensed under terms that can be found in the LICENSE file
+ * in the root directory of this software component.
+ * If no LICENSE file comes with this software, it is provided AS-IS.
+ *
+ ******************************************************************************
+ * This file provides two functions and one global variable to be called from
+ * user application:
+ * - SystemInit(): This function is called at startup just after reset and
+ * before branch to main program. This call is made inside
+ * the "startup_stm32u0xx.s" file.
+ *
+ * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+ * by the user application to setup the SysTick
+ * timer or configure other parameters.
+ *
+ * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+ * be called whenever the core clock is changed
+ * during program execution.
+ *
+ * After each device reset the MSI (4 MHz) is used as system clock source.
+ * Then SystemInit() function is called, in "startup_stm32u0xx.s" file, to
+ * configure the system clock before to branch to main program.
+ *
+ * This file configures the system clock as follows:
+ *=============================================================================
+ *-----------------------------------------------------------------------------
+ * System Clock source | MSI
+ *-----------------------------------------------------------------------------
+ * SYSCLK(Hz) | 4000000
+ *-----------------------------------------------------------------------------
+ * HCLK(Hz) | 4000000
+ *-----------------------------------------------------------------------------
+ * AHB Prescaler | 1
+ *-----------------------------------------------------------------------------
+ * APB Prescaler | 1
+ *-----------------------------------------------------------------------------
+ * HSI Division factor | 1
+ *-----------------------------------------------------------------------------
+ * PLL_M | 1
+ *-----------------------------------------------------------------------------
+ * PLL_N | 8
+ *-----------------------------------------------------------------------------
+ * PLL_P | 7
+ *-----------------------------------------------------------------------------
+ * PLL_Q | 2
+ *-----------------------------------------------------------------------------
+ * PLL_R | 2
+ *-----------------------------------------------------------------------------
+ * Require 48MHz for RNG | Disabled
+ *-----------------------------------------------------------------------------
+ *=============================================================================
+ */
+
+/** @addtogroup CMSIS
+ * @{
+ */
+
+/** @addtogroup stm32u0xx_system
+ * @{
+ */
+
+/** @addtogroup STM32U0xx_System_Private_Includes
+ * @{
+ */
+
+#include "stm32u0xx.h"
+
+#if !defined (HSE_VALUE)
+#define HSE_VALUE (32000000U) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+#define HSI_VALUE (16000000UL) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+#if !defined (MSI_VALUE)
+#define MSI_VALUE (4000000UL) /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+#if !defined (LSI_VALUE)
+#define LSI_VALUE (32000UL) /*!< Value of the Internal oscillator in Hz */
+#endif /* LSI_VALUE */
+
+#if !defined (LSE_VALUE)
+#define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz */
+#endif /* LSE_VALUE */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32U0xx_System_Private_TypesDefinitions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32U0xx_System_Private_Defines
+ * @{
+ */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to relocate your vector Table in
+ Internal SRAM. */
+//#define VECT_TAB_SRAM
+#define VECT_TAB_OFFSET 0x0U /*!< Vector Table base offset field.
+ This value must be a multiple of 0x200. */
+
+/*!< Comment the following line if you would like to disable the software
+ workaround related to debug access in case RDP=1 and Boot_Lock=1 */
+#define ENABLE_DBG_SWEN /*!< Enable the debugger read access. */
+/******************************************************************************/
+/**
+ * @}
+ */
+
+/** @addtogroup STM32U0xx_System_Private_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32U0xx_System_Private_Variables
+ * @{
+ */
+/* The SystemCoreClock variable is updated in three ways:
+ 1) by calling CMSIS function SystemCoreClockUpdate()
+ 2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+ 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+ Note: If you use this function to configure the system clock; then there
+ is no need to call the 2 first functions listed above, since SystemCoreClock
+ variable is updated automatically.
+*/
+uint32_t SystemCoreClock = 4000000U;
+
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+const uint8_t APBPrescTable[8] = {0, 0, 0, 0, 1, 2, 3, 4};
+const uint32_t MSIRangeTable[12] = {100000U, 200000U, 400000U, 800000U, 1000000U, 2000000U, \
+ 4000000U, 8000000U, 16000000U, 24000000U, 32000000U, 48000000U
+ };
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32U0xx_System_Private_FunctionPrototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @addtogroup STM32U0xx_System_Private_Functions
+ * @{
+ */
+
+/**
+ * @brief Setup the microcontroller system.
+ * @param None
+ * @retval None
+ */
+
+void SystemInit(void)
+{
+#ifdef ENABLE_DBG_SWEN
+uint32_t tmp_seccr;
+uint32_t tmp_optr;
+#endif /* ENABLE_DBG_SWEN */
+ /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+ SCB->VTOR = SRAM1_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+ SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif /* VECT_TAB_SRAM */
+
+/* Software workaround added to keep Debug enabled after Boot_Lock activation and RDP=1 */
+#ifdef ENABLE_DBG_SWEN
+ tmp_seccr = FLASH->SECR;
+ tmp_optr = FLASH->OPTR;
+ if (((tmp_seccr & FLASH_SECR_BOOT_LOCK) == FLASH_SECR_BOOT_LOCK) \
+ && (((tmp_optr & FLASH_OPTR_RDP) != 0xCCU) \
+ && ((tmp_optr & FLASH_OPTR_RDP) != 0xAAU)))
+ {
+ FLASH->ACR |= FLASH_ACR_DBG_SWEN; /* Debug access software enabled to avoid the chip
+ to be locked when RDP=1 and Boot_Lock=1 */
+ }
+#endif /* ENABLE_DBG_SWEN */
+}
+
+/**
+ * @brief Update SystemCoreClock variable according to Clock Register Values.
+ * The SystemCoreClock variable contains the core clock (HCLK), it can
+ * be used by the user application to setup the SysTick timer or configure
+ * other parameters.
+ *
+ * @note Each time the core clock (HCLK) changes, this function must be called
+ * to update SystemCoreClock variable value. Otherwise, any configuration
+ * based on this variable will be incorrect.
+ *
+ * @note - The system frequency computed by this function is not the real
+ * frequency in the chip. It is calculated based on the predefined
+ * constant and the selected clock source:
+ *
+ * - If SYSCLK source is MSI, SystemCoreClock will contain the MSI_VALUE(*)
+ *
+ * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**)
+ *
+ * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
+ *
+ * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***)
+ * or HSI_VALUE(*) or MSI_VALUE(*) multiplied/divided by the PLL factors.
+ *
+ * (*) MSI_VALUE is a constant defined in stm32u0xx_hal.h file (default value
+ * 4 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (**) HSI_VALUE is a constant defined in stm32u0xx_hal.h file (default value
+ * 16 MHz) but the real value may vary depending on the variations
+ * in voltage and temperature.
+ *
+ * (***) HSE_VALUE is a constant defined in stm32u0xx_hal.h file (default value
+ * 8 MHz), user has to ensure that HSE_VALUE is same as the real
+ * frequency of the crystal used. Otherwise, this function may
+ * have wrong result.
+ *
+ * - The result of this function could be not correct when using fractional
+ * value for HSE crystal.
+ *
+ * @param None
+ * @retval None
+ */
+void SystemCoreClockUpdate(void)
+{
+ uint32_t tmp, msirange, pllvco, pllsource, pllm, pllr;
+
+ /* Get MSI Range frequency--------------------------------------------------*/
+ if ((RCC->CR & RCC_CR_MSIRGSEL) == 0U)
+ {
+ /* MSISRANGE from RCC_CSR applies */
+ msirange = (RCC->CSR & RCC_CSR_MSISTBYRG) >> 8U;
+ }
+ else
+ {
+ /* MSIRANGE from RCC_CR applies */
+ msirange = (RCC->CR & RCC_CR_MSIRANGE) >> 4U;
+ }
+ /* MSI frequency range in HZ*/
+ if (msirange > 11U)
+ {
+ msirange = 0U;
+ }
+ msirange = MSIRangeTable[msirange];
+
+ /* Get SYSCLK source -------------------------------------------------------*/
+ switch (RCC->CFGR & RCC_CFGR_SWS)
+ {
+ case 0x00: /* MSI used as system clock source */
+ SystemCoreClock = msirange;
+ break;
+
+ case RCC_CFGR_SWS_0: /* HSI used as system clock source */
+ SystemCoreClock = HSI_VALUE;
+ break;
+
+ case RCC_CFGR_SWS_1: /* HSE used as system clock source */
+ SystemCoreClock = HSE_VALUE;
+ break;
+
+ case RCC_CFGR_SWS_2: /* LSI used as system clock */
+ SystemCoreClock = LSI_VALUE;
+ break;
+
+ case (RCC_CFGR_SWS_2 | RCC_CFGR_SWS_0): /* LSE used as system clock */
+ SystemCoreClock = LSE_VALUE;
+ break;
+
+ case (RCC_CFGR_SWS_1 | RCC_CFGR_SWS_0): /* PLL used as system clock source */
+ /* PLL_VCO = (HSE_VALUE or HSI_VALUE or MSI_VALUE/ PLLM) * PLLN
+ SYSCLK = PLL_VCO / PLLR
+ */
+ pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
+ pllm = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLM) >> RCC_PLLCFGR_PLLM_Pos) + 1U ;
+
+ switch (pllsource)
+ {
+ case RCC_PLLCFGR_PLLSRC_0: /* MSI used as PLL clock source */
+ pllvco = (msirange / pllm);
+ break;
+
+ case RCC_PLLCFGR_PLLSRC_1: /* HSI used as PLL clock source */
+ pllvco = (HSI_VALUE / pllm);
+ break;
+
+ case (RCC_PLLCFGR_PLLSRC_1 | RCC_PLLCFGR_PLLSRC_0): /* HSE used as PLL clock source */
+ pllvco = (HSE_VALUE / pllm);
+ break;
+
+ default: /* no clock used as PLL clock source */
+ pllvco = 0x0U;
+ break;
+ }
+ pllvco = pllvco * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos);
+ pllr = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> RCC_PLLCFGR_PLLR_Pos) + 1UL);
+ SystemCoreClock = pllvco / pllr;
+ break;
+
+ default:
+ SystemCoreClock = msirange;
+ break;
+ }
+ /* Compute HCLK clock frequency --------------------------------------------*/
+ /* Get HCLK prescaler */
+ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos) & 0xFU];
+ /* HCLK clock frequency */
+ SystemCoreClock >>= tmp;
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
generated by cgit v1.2.3 (git 2.39.1) at 2025-04-05 11:37:06 +0000