/** ****************************************************************************** * @file stm32u0xx_hal_rtc_ex.h * @author GPM Application Team * @brief Header file of RTC HAL Extended module. ****************************************************************************** * @attention * * Copyright (c) 2023 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32U0xx_HAL_RTC_EX_H #define __STM32U0xx_HAL_RTC_EX_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32u0xx_hal_def.h" /** @addtogroup STM32U0xx_HAL_Driver * @{ */ /** @defgroup RTCEx RTCEx * @{ */ /* Exported types ------------------------------------------------------------*/ /** @defgroup RTCEx_Exported_Types RTCEx Exported Types * @{ */ /** @defgroup RTCEx_Tamper_structure_definition RTCEx Tamper structure definition * @{ */ typedef struct { uint32_t Tamper; /*!< Specifies the Tamper Pin. This parameter can be a value of @ref RTCEx_Tamper_Pins */ uint32_t Trigger; /*!< Specifies the Tamper Trigger. This parameter can be a value of @ref RTCEx_Tamper_Trigger */ uint32_t NoErase; /*!< Specifies the Tamper no erase mode. This parameter can be a value of @ref RTCEx_Tamper_EraseBackUp */ uint32_t MaskFlag; /*!< Specifies the Tamper Flag masking. This parameter can be a value of @ref RTCEx_Tamper_MaskFlag */ uint32_t Filter; /*!< Specifies the TAMP Filter Tamper. This parameter can be a value of @ref RTCEx_Tamper_Filter */ uint32_t SamplingFrequency; /*!< Specifies the sampling frequency. This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies */ uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration . This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration */ uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp . This parameter can be a value of @ref RTCEx_Tamper_Pull_UP */ uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection. This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection */ } RTC_TamperTypeDef; /** * @} */ /** * @} */ /** @defgroup RTCEx_Internal_Tamper_structure_definition RTCEx Internal Tamper structure definition * @{ */ typedef struct { uint32_t IntTamper; /*!< Specifies the Internal Tamper Pin. This parameter can be a value of @ref RTCEx_Internal_Tamper_Pins */ uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection. This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection */ uint32_t NoErase; /*!< Specifies the internal Tamper no erase mode. This parameter can be a value of @ref RTCEx_Tamper_EraseBackUp */ } RTC_InternalTamperTypeDef; /** * @} */ /** * @} */ /* Exported constants --------------------------------------------------------*/ /** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants * @{ */ /** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definition * @{ */ #define RTC_TIMESTAMPEDGE_RISING 0x00000000U #define RTC_TIMESTAMPEDGE_FALLING RTC_CR_TSEDGE /** * @} */ /** @defgroup RTCEx_TimeStamp_Pin_Selections RTCEx TimeStamp Pin Selection * @{ */ #define RTC_TIMESTAMPPIN_DEFAULT 0x00000000U /** * @} */ /** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definitions * @{ */ #define RTC_WAKEUPCLOCK_RTCCLK_DIV16 0x00000000U #define RTC_WAKEUPCLOCK_RTCCLK_DIV8 RTC_CR_WUCKSEL_0 #define RTC_WAKEUPCLOCK_RTCCLK_DIV4 RTC_CR_WUCKSEL_1 #define RTC_WAKEUPCLOCK_RTCCLK_DIV2 (RTC_CR_WUCKSEL_0 | RTC_CR_WUCKSEL_1) #define RTC_WAKEUPCLOCK_CK_SPRE_16BITS RTC_CR_WUCKSEL_2 #define RTC_WAKEUPCLOCK_CK_SPRE_17BITS (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_2) /** * @} */ /** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definitions * @{ */ #define RTC_SMOOTHCALIB_PERIOD_32SEC 0x00000000U /*!< If RTCCLK = 32768 Hz, Smooth calibration period is 32s, else 2exp20 RTCCLK pulses */ #define RTC_SMOOTHCALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< If RTCCLK = 32768 Hz, Smooth calibration period is 16s, else 2exp19 RTCCLK pulses */ #define RTC_SMOOTHCALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< If RTCCLK = 32768 Hz, Smooth calibration period is 8s, else 2exp18 RTCCLK pulses */ /** * @} */ /** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definitions * @{ */ #define RTC_SMOOTHCALIB_PLUSPULSES_SET RTC_CALR_CALP /*!< The number of RTCCLK pulses added during a X -second window = Y - CALM[8:0] with Y = 512, 256, 128 when X = 32, 16, 8 */ #define RTC_SMOOTHCALIB_PLUSPULSES_RESET 0x00000000U /*!< The number of RTCCLK pulses subbstited during a 32-second window = CALM[8:0] */ /** * @} */ /** @defgroup RTCEx_Smooth_calib_low_power_Definitions RTCEx Smooth calib Low Power Definitions * @{ */ #define RTC_LPCAL_SET RTC_CALR_LPCAL /*!< Calibration window is 220 ck_apre, which is the required configuration for ultra-low consumption mode. */ #define RTC_LPCAL_RESET 0x00000000U /*!< Calibration window is 220 RTCCLK, which is a high-consumption mode. This mode should be set only when less than 32s calibration window is required. */ /** * @} */ /** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output selection Definitions * @{ */ #define RTC_CALIBOUTPUT_512HZ 0x00000000U #define RTC_CALIBOUTPUT_1HZ RTC_CR_COSEL /** * @} */ /** @defgroup RTCEx_Add_1_Second_Parameter_Definition RTCEx Add 1 Second Parameter Definitions * @{ */ #define RTC_SHIFTADD1S_RESET 0x00000000U #define RTC_SHIFTADD1S_SET RTC_SHIFTR_ADD1S /** * @} */ /** @defgroup RTCEx_Tamper_Pins RTCEx Tamper Pins Definition * @{ */ #define RTC_TAMPER_1 TAMP_CR1_TAMP1E #define RTC_TAMPER_2 TAMP_CR1_TAMP2E #define RTC_TAMPER_3 TAMP_CR1_TAMP3E #define RTC_TAMPER_4 TAMP_CR1_TAMP4E #define RTC_TAMPER_5 TAMP_CR1_TAMP5E #define RTC_TAMPER_ALL (RTC_TAMPER_1 | RTC_TAMPER_2 |\ RTC_TAMPER_3 | RTC_TAMPER_4 |\ RTC_TAMPER_5 ) /** * @} */ /** @defgroup RTCEx_Internal_Tamper_Pins RTCEx Internal Tamper Pins Definition * @{ */ #define RTC_INT_TAMPER_3 TAMP_CR1_ITAMP3E #define RTC_INT_TAMPER_4 TAMP_CR1_ITAMP4E #define RTC_INT_TAMPER_5 TAMP_CR1_ITAMP5E #define RTC_INT_TAMPER_6 TAMP_CR1_ITAMP6E #define RTC_INT_TAMPER_ALL (RTC_INT_TAMPER_3 | RTC_INT_TAMPER_4 |\ RTC_INT_TAMPER_5 | RTC_INT_TAMPER_6) /** * @} */ /** @defgroup RTCEx_Tamper_Trigger RTCEx Tamper Trigger * @{ */ #define RTC_TAMPERTRIGGER_RISINGEDGE 0x00U /*!< Warning : Filter must be RTC_TAMPERFILTER_DISABLE */ #define RTC_TAMPERTRIGGER_FALLINGEDGE 0x01U /*!< Warning : Filter must be RTC_TAMPERFILTER_DISABLE */ #define RTC_TAMPERTRIGGER_LOWLEVEL 0x02U /*!< Warning : Filter must not be RTC_TAMPERFILTER_DISABLE */ #define RTC_TAMPERTRIGGER_HIGHLEVEL 0x03U /*!< Warning : Filter must not be RTC_TAMPERFILTER_DISABLE */ /** * @} */ /** @defgroup RTCEx_Tamper_MaskFlag RTCEx Tamper MaskFlag * @{ */ #define RTC_TAMPERMASK_FLAG_DISABLE 0x00U #define RTC_TAMPERMASK_FLAG_ENABLE 0x01U /** * @} */ /** @defgroup RTCEx_Tamper_EraseBackUp RTCEx Tamper EraseBackUp * @{ */ #define RTC_TAMPER_ERASE_BACKUP_ENABLE 0x00U #define RTC_TAMPER_ERASE_BACKUP_DISABLE 0x01U /** * @} */ /** @defgroup RTCEx_Tamper_Filter RTCEx Tamper Filter * @{ */ #define RTC_TAMPERFILTER_DISABLE 0x00000000U /*!< Tamper filter is disabled */ #define RTC_TAMPERFILTER_2SAMPLE TAMP_FLTCR_TAMPFLT_0 /*!< Tamper is activated after 2 consecutive samples at the active level */ #define RTC_TAMPERFILTER_4SAMPLE TAMP_FLTCR_TAMPFLT_1 /*!< Tamper is activated after 4 consecutive samples at the active level */ #define RTC_TAMPERFILTER_8SAMPLE TAMP_FLTCR_TAMPFLT /*!< Tamper is activated after 8 consecutive samples at the active level */ /** * @} */ /** @defgroup RTCEx_Tamper_Sampling_Frequencies RTCEx Tamper Sampling Frequencies * @{ */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 0x00000000U /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 32768 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 TAMP_FLTCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 16384 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 TAMP_FLTCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 8192 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 (TAMP_FLTCR_TAMPFREQ_0 | TAMP_FLTCR_TAMPFREQ_1) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 4096 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 TAMP_FLTCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 2048 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 (TAMP_FLTCR_TAMPFREQ_0 | TAMP_FLTCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 1024 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 (TAMP_FLTCR_TAMPFREQ_1 | TAMP_FLTCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 512 */ #define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 (TAMP_FLTCR_TAMPFREQ_0 | TAMP_FLTCR_TAMPFREQ_1 | \ TAMP_FLTCR_TAMPFREQ_2) /*!< Each of the tamper inputs are sampled with a frequency = RTCCLK / 256 */ /** * @} */ /** @defgroup RTCEx_Tamper_Pin_Precharge_Duration RTCEx Tamper Pin Precharge Duration * @{ */ #define RTC_TAMPERPRECHARGEDURATION_1RTCCLK 0x00000000U /*!< Tamper pins are pre-charged before sampling during 1 RTCCLK cycle */ #define RTC_TAMPERPRECHARGEDURATION_2RTCCLK TAMP_FLTCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before sampling during 2 RTCCLK cycles */ #define RTC_TAMPERPRECHARGEDURATION_4RTCCLK TAMP_FLTCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before sampling during 4 RTCCLK cycles */ #define RTC_TAMPERPRECHARGEDURATION_8RTCCLK (TAMP_FLTCR_TAMPPRCH_0 | TAMP_FLTCR_TAMPPRCH_1) /*!< Tamper pins are pre-charged before sampling during 8 RTCCLK cycles */ /** * @} */ /** @defgroup RTCEx_Tamper_Pull_UP RTCEx Tamper Pull UP * @{ */ #define RTC_TAMPER_PULLUP_ENABLE 0x00000000U /*!< Tamper pins are pre-charged before sampling */ #define RTC_TAMPER_PULLUP_DISABLE TAMP_FLTCR_TAMPPUDIS /*!< Tamper pins pre-charge is disabled */ /** * @} */ /** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection RTCEx Tamper TimeStamp On Tamper Detection Definitions * @{ */ #define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE 0x00000000U /*!< TimeStamp on Tamper Detection event is not saved */ #define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE RTC_CR_TAMPTS /*!< TimeStamp on Tamper Detection event saved */ /** * @} */ /** @defgroup RTCEx_Internal_Tamper_Interrupt RTCEx Internal Tamper Interrupt * @{ */ #define RTC_IT_TAMP_1 TAMP_IER_TAMP1IE /*!< Tamper 1 Interrupt */ #define RTC_IT_TAMP_2 TAMP_IER_TAMP2IE /*!< Tamper 2 Interrupt */ #define RTC_IT_TAMP_3 TAMP_IER_TAMP3IE /*!< Tamper 3 Interrupt */ #define RTC_IT_TAMP_4 TAMP_IER_TAMP4IE /*!< Tamper 4 Interrupt */ #define RTC_IT_TAMP_5 TAMP_IER_TAMP5IE /*!< Tamper 5 Interrupt */ #define RTC_IT_TAMP_ALL (RTC_IT_TAMP_1 | RTC_IT_TAMP_2 |\ RTC_IT_TAMP_3 | RTC_IT_TAMP_4 |\ RTC_IT_TAMP_5) #define RTC_IT_INT_TAMP_3 TAMP_IER_ITAMP3IE /*!< Tamper 3 internal Interrupt */ #define RTC_IT_INT_TAMP_4 TAMP_IER_ITAMP4IE /*!< Tamper 4 internal Interrupt */ #define RTC_IT_INT_TAMP_5 TAMP_IER_ITAMP5IE /*!< Tamper 5 internal Interrupt */ #define RTC_IT_INT_TAMP_6 TAMP_IER_ITAMP6IE /*!< Tamper 6 internal Interrupt */ #define RTC_IT_INT_TAMP_ALL (RTC_IT_INT_TAMP_3 | RTC_IT_INT_TAMP_4 |\ RTC_IT_INT_TAMP_5 | RTC_IT_INT_TAMP_6) /** * @} */ /** @defgroup RTCEx_Flags RTCEx Flags * @{ */ #define RTC_FLAG_TAMP_1 TAMP_SR_TAMP1F #define RTC_FLAG_TAMP_2 TAMP_SR_TAMP2F #define RTC_FLAG_TAMP_3 TAMP_SR_TAMP3F #define RTC_FLAG_TAMP_4 TAMP_SR_TAMP4F #define RTC_FLAG_TAMP_5 TAMP_SR_TAMP5F #define RTC_FLAG_TAMP_ALL (RTC_FLAG_TAMP_1 | RTC_FLAG_TAMP_2 | RTC_FLAG_TAMP_3 |\ RTC_FLAG_TAMP_4 | RTC_FLAG_TAMP_5) #define RTC_FLAG_INT_TAMP_3 TAMP_SR_ITAMP3F #define RTC_FLAG_INT_TAMP_4 TAMP_SR_ITAMP4F #define RTC_FLAG_INT_TAMP_5 TAMP_SR_ITAMP5F #define RTC_FLAG_INT_TAMP_6 TAMP_SR_ITAMP6F #define RTC_FLAG_INT_TAMP_ALL (RTC_FLAG_INT_TAMP_3 | RTC_FLAG_INT_TAMP_4 |\ RTC_FLAG_INT_TAMP_5 | RTC_FLAG_INT_TAMP_6) /** * @} */ /** @defgroup RTCEx_Backup_Registers RTCEx Backup Registers Definition * @{ */ #define RTC_BKP_NB 9u #define RTC_BKP_NUMBER RTC_BKP_NB #define RTC_BKP_DR0 0x00U #define RTC_BKP_DR1 0x01U #define RTC_BKP_DR2 0x02U #define RTC_BKP_DR3 0x03U #define RTC_BKP_DR4 0x04U #define RTC_BKP_DR5 0x05U #define RTC_BKP_DR6 0x06U #define RTC_BKP_DR7 0x07U #define RTC_BKP_DR8 0x08U /** * @} */ /** @defgroup RTCEx_Binary_Mode RTC Binary Mode (32-bit free-running counter configuration). * Warning : It Should not be confused with the Binary format @ref RTC_Input_parameter_format_definitions. * @{ */ #define RTC_BINARY_NONE 0x00000000U /*!< Free running BCD calendar mode (Binary mode disabled) */ #define RTC_BINARY_ONLY RTC_ICSR_BIN_0 /*!< Free running Binary mode (BCD mode disabled) */ #define RTC_BINARY_MIX RTC_ICSR_BIN_1 /*!< Free running BCD calendar and Binary modes */ /** * @} */ /** @defgroup RTCEx_Binary_mix_BCDU If Binary mode is RTC_BINARY_MIX, the BCD calendar second is incremented using the SSR Least Significant Bits. * @{ */ #define RTC_BINARY_MIX_BCDU_0 0x00000000U /*!< The 1s BCD calendar increment is generated each time SS[7:0] = 0 */ #define RTC_BINARY_MIX_BCDU_1 (0x1UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[8:0] = 0 */ #define RTC_BINARY_MIX_BCDU_2 (0x2UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[9:0] = 0 */ #define RTC_BINARY_MIX_BCDU_3 (0x3UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[10:0] = 0 */ #define RTC_BINARY_MIX_BCDU_4 (0x4UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[11:0] = 0 */ #define RTC_BINARY_MIX_BCDU_5 (0x5UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[12:0] = 0 */ #define RTC_BINARY_MIX_BCDU_6 (0x6UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[13:0] = 0 */ #define RTC_BINARY_MIX_BCDU_7 (0x7UL << RTC_ICSR_BCDU_Pos) /*!< The 1s BCD calendar increment is generated each time SS[14:0] = 0 */ /** * @} */ /** @defgroup RTCEx_Alarm_Sub_Seconds_binary_Masks_Definitions RTC Alarm Sub Seconds with binary mode Masks Definitions * @{ */ #define RTC_ALARMSUBSECONDBINMASK_ALL 0x00000000U /*!< All Alarm SS fields are masked. There is no comparison on sub seconds for Alarm */ #define RTC_ALARMSUBSECONDBINMASK_SS31_1 (1UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:1] are don't care in Alarm comparison.Only SS[0] is compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_2 (2UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:2] are don't care in Alarm comparison.Only SS[1:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_3 (3UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:3] are don't care in Alarm comparison.Only SS[2:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_4 (4UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:4] are don't care in Alarm comparison.Only SS[3:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_5 (5UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:5] are don't care in Alarm comparison.Only SS[4:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_6 (6UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:6] are don't care in Alarm comparison.Only SS[5:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_7 (7UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:7] are don't care in Alarm comparison.Only SS[6:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_8 (8UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:8] are don't care in Alarm comparison.Only SS[7:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_9 (9UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:9] are don't care in Alarm comparison.Only SS[8:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_10 (10UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:10] are don't care in Alarm comparison.Only SS[9:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_11 (11UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:11] are don't care in Alarm comparison.Only SS[10:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_12 (12UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:12] are don't care in Alarm comparison.Only SS[11:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_13 (13UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:13] are don't care in Alarm comparison.Only SS[12:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_14 (14UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:14] are don't care in Alarm comparison.Only SS[13:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_15 (15UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:15] are don't care in Alarm comparison.Only SS[14:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_16 (16UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:16] are don't care in Alarm comparison.Only SS[15:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_17 (17UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:17] are don't care in Alarm comparison.Only SS[16:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_18 (18UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:18] are don't care in Alarm comparison.Only SS[17:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_19 (19UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:19] are don't care in Alarm comparison.Only SS[18:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_20 (20UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:20] are don't care in Alarm comparison.Only SS[19:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_21 (21UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:21] are don't care in Alarm comparison.Only SS[20:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_22 (22UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:22] are don't care in Alarm comparison.Only SS[21:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_23 (23UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:23] are don't care in Alarm comparison.Only SS[22:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_24 (24UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:24] are don't care in Alarm comparison.Only SS[23:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_25 (25UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:25] are don't care in Alarm comparison.Only SS[24:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_26 (26UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:26] are don't care in Alarm comparison.Only SS[25:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_27 (27UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:27] are don't care in Alarm comparison.Only SS[26:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_28 (28UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:28] are don't care in Alarm comparison.Only SS[27:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_29 (29UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:29] are don't care in Alarm comparison.Only SS[28:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31_30 (30UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:30] are don't care in Alarm comparison.Only SS[29:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_SS31 (31UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31] is don't care in Alarm comparison.Only SS[30:0] are compared */ #define RTC_ALARMSUBSECONDBINMASK_NONE (32UL << RTC_ALRMASSR_MASKSS_Pos) /*!< SS[31:0] are compared and must match to activate alarm.*/ /** * @} */ /** @defgroup RTCEx_Alarm_Sub_Seconds_binary_Clear_Definitions RTC Alarm Sub Seconds with binary mode auto clear Definitions * @{ */ #define RTC_ALARMSUBSECONDBIN_AUTOCLR_NO 0UL /*!< The synchronous Binary counter (SS[31:0] in RTC_SSR) is free-running. */ #define RTC_ALARMSUBSECONDBIN_AUTOCLR_YES RTC_ALRMASSR_SSCLR /*!< The synchronous Binary counter (SS[31:0] in RTC_SSR) is running from 0xFFFFFFFF to RTC_ALRMABINR -> SS[31:0] value and is automatically reloaded with 0xFFFFFFFF whenreaching RTC_ALRMABINR -> SS[31:0]. */ /** * @} */ /** * @} */ /* Exported macros -----------------------------------------------------------*/ /** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros * @{ */ /** @brief Clear the specified RTC pending flag. * @param __HANDLE__ specifies the RTC Handle. * @param __FLAG__ specifies the flag to check. * This parameter can be any combination of the following values: * @arg @ref RTC_CLEAR_ITSF Clear Internal Time-stamp flag * @arg @ref RTC_CLEAR_TSOVF Clear Time-stamp overflow flag * @arg @ref RTC_CLEAR_TSF Clear Time-stamp flag * @arg @ref RTC_CLEAR_WUTF Clear Wakeup timer flag * @arg @ref RTC_CLEAR_ALRBF Clear Alarm B flag * @arg @ref RTC_CLEAR_ALRAF Clear Alarm A flag * @arg @ref RTC_CLEAR_SSRUF Clear SSR underflow flag" * @retval None */ #define __HAL_RTC_CLEAR_FLAG(__HANDLE__, __FLAG__) (RTC->SCR = (__FLAG__)) /** @brief Check whether the specified RTC flag is set or not. * @param __HANDLE__ specifies the RTC Handle. * @param __FLAG__ specifies the flag to check. * This parameter can be any combination of the following values: * @arg @ref RTC_FLAG_RECALPF Recalibration pending Flag * @arg @ref RTC_FLAG_INITF Initialization flag * @arg @ref RTC_FLAG_RSF Registers synchronization flag * @arg @ref RTC_FLAG_INITS Initialization status flag * @arg @ref RTC_FLAG_SHPF Shift operation pending flag * @arg @ref RTC_FLAG_WUTWF Wakeup timer write flag * @arg @ref RTC_FLAG_ITSF Internal Time-stamp flag * @arg @ref RTC_FLAG_TSOVF Time-stamp overflow flag * @arg @ref RTC_FLAG_TSF Time-stamp flag * @arg @ref RTC_FLAG_WUTF Wakeup timer flag * @arg @ref RTC_FLAG_ALRBF Alarm B flag * @arg @ref RTC_FLAG_ALRAF Alarm A flag * @retval The state of __FLAG__ (TRUE or FALSE). */ #define __HAL_RTC_GET_FLAG(__HANDLE__, __FLAG__) \ (((((__FLAG__)) >> 8U) == 1U) ? (RTC->ICSR & (1U << (((uint16_t)(__FLAG__)) & RTC_IT_MASK))) : \ (RTC->SR & (1U << (((uint16_t)(__FLAG__)) & RTC_IT_MASK)))) /* ---------------------------------WAKEUPTIMER---------------------------------*/ /** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer * @{ */ /** * @brief Enable the RTC WakeUp Timer peripheral. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_WUTE)) /** * @brief Disable the RTC WakeUp Timer peripheral. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_WUTE)) /** * @brief Enable the RTC WakeUpTimer interrupt. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be enabled. * This parameter can be: * @arg @ref RTC_IT_WUT WakeUpTimer interrupt * @retval None */ #define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR |= (__INTERRUPT__)) /** * @brief Disable the RTC WakeUpTimer interrupt. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt sources to be disabled. * This parameter can be: * @arg @ref RTC_IT_WUT WakeUpTimer interrupt * @retval None */ #define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR &= ~(__INTERRUPT__)) /** * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC WakeUpTimer interrupt to check. * This parameter can be: * @arg @ref RTC_IT_WUT WakeUpTimer interrupt * @retval The state of __FLAG__ (TRUE or FALSE). */ #define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) ((((RTC->MISR) &\ ((__INTERRUPT__)>> 12U)) != 0UL) ? 1UL : 0UL) /** * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC Wake Up timer interrupt sources to check. * This parameter can be: * @arg @ref RTC_IT_WUT WakeUpTimer interrupt * @retval The state of __FLAG__ (TRUE or FALSE). */ #define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((RTC->CR) &\ (__INTERRUPT__)) != 0UL) ? 1UL : 0UL) /** * @brief Get the selected RTC WakeUpTimers flag status. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC WakeUpTimer Flag is pending or not. * This parameter can be: * @arg @ref RTC_FLAG_WUTF * @arg @ref RTC_FLAG_WUTWF * @retval The state of __FLAG__ (TRUE or FALSE). */ #define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__), (__FLAG__))) /** * @brief Clear the RTC Wake Up timers pending flags. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC WakeUpTimer Flag to clear. * This parameter can be: * @arg @ref RTC_FLAG_WUTF * @retval None */ #define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_CLEAR_FLAG((__HANDLE__), RTC_CLEAR_WUTF)) /* WAKE-UP TIMER EXTI */ /* ------------------ */ /** * @brief Enable interrupt on the RTC WakeUp Timer associated Exti line. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) /** * @brief Disable interrupt on the RTC WakeUp Timer associated Exti line. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) /** * @brief Enable event on the RTC WakeUp Timer associated Exti line. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) /** * @brief Disable event on the RTC WakeUp Timer associated Exti line. * @retval None */ #define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) /** * @} */ /* ---------------------------------TIMESTAMP---------------------------------*/ /** @defgroup RTCEx_Timestamp RTC Timestamp * @{ */ /** * @brief Enable the RTC TimeStamp peripheral. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_TSE)) /** * @brief Disable the RTC TimeStamp peripheral. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_TSE)) /** * @brief Enable the RTC TimeStamp interrupt. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be enabled. * This parameter can be: * @arg @ref RTC_IT_TS TimeStamp interrupt * @retval None */ #define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR |= (__INTERRUPT__)) /** * @brief Disable the RTC TimeStamp interrupt. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt source to be disabled. * This parameter can be: * @arg @ref RTC_IT_TS TimeStamp interrupt * @retval None */ #define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR &= ~(__INTERRUPT__)) /** * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC TimeStamp interrupt to check. * This parameter can be: * @arg @ref RTC_IT_TS TimeStamp interrupt * @retval The state of __FLAG__ (TRUE or FALSE). */ #define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) ((((RTC->MISR) &\ ((__INTERRUPT__)>> 12U)) != 0U) ? 1UL : 0UL) /** * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC Time Stamp interrupt source to check. * This parameter can be: * @arg @ref RTC_IT_TS TimeStamp interrupt * @retval The state of __FLAG__ (TRUE or FALSE). */ #define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((RTC->CR) &\ (__INTERRUPT__)) != 0U) ? 1UL : 0UL) /** * @brief Get the selected RTC TimeStamps flag status. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC TimeStamp Flag is pending or not. * This parameter can be: * @arg @ref RTC_FLAG_TSF * @arg @ref RTC_FLAG_TSOVF * @retval The state of __FLAG__ (TRUE or FALSE). */ #define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__),(__FLAG__))) /** * @brief Clear the RTC Time Stamps pending flags. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC TimeStamp Flag to clear. * This parameter can be: * @arg @ref RTC_FLAG_TSF * @arg @ref RTC_FLAG_TSOVF * @retval None */ #define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) \ (((__FLAG__) == RTC_FLAG_TSF) ? (__HAL_RTC_CLEAR_FLAG((__HANDLE__), RTC_CLEAR_TSF)) : \ (__HAL_RTC_CLEAR_FLAG((__HANDLE__), RTC_CLEAR_TSOVF))) /** * @brief Enable interrupt on the RTC Timestamp associated Exti line. * @retval None */ #define __HAL_RTC_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_TIMESTAMP_EVENT) /** * @brief Disable interrupt on the RTC Timestamp associated Exti line. * @retval None */ #define __HAL_RTC_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_TIMESTAMP_EVENT)) /** * @brief Enable event on the RTC Timestamp associated Exti line. * @retval None */ #define __HAL_RTC_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_TIMESTAMP_EVENT) /** * @brief Disable event on the RTC Timestamp associated Exti line. * @retval None */ #define __HAL_RTC_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_TIMESTAMP_EVENT)) /** * @brief Enable the RTC internal TimeStamp peripheral. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_INTERNAL_TIMESTAMP_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_ITSE)) /** * @brief Disable the RTC internal TimeStamp peripheral. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_INTERNAL_TIMESTAMP_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_ITSE)) /** * @brief Get the selected RTC Internal Time Stamps flag status. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC Internal Time Stamp Flag is pending or not. * This parameter can be: * @arg @ref RTC_FLAG_ITSF * @retval None */ #define __HAL_RTC_INTERNAL_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__),(__FLAG__))) /** * @brief Clear the RTC Internal Time Stamps pending flags. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC Internal Time Stamp Flag source to clear. * This parameter can be: * @arg @ref RTC_FLAG_ITSF * @retval None */ #define __HAL_RTC_INTERNAL_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) \ (__HAL_RTC_CLEAR_FLAG((__HANDLE__), RTC_CLEAR_ITSF)) /** * @brief Enable the RTC TimeStamp on Tamper detection. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_TAMPTS_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_TAMPTS)) /** * @brief Disable the RTC TimeStamp on Tamper detection. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_TAMPTS_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_TAMPTS)) /** * @brief Enable the RTC Tamper detection output. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_TAMPOE_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_TAMPOE)) /** * @brief Disable the RTC Tamper detection output. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_TAMPOE_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_TAMPOE)) /** * @} */ /* ------------------------------Calibration----------------------------------*/ /** @defgroup RTCEx_Calibration RTC Calibration * @{ */ /** * @brief Enable the RTC calibration output. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_COE)) /** * @brief Disable the calibration output. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_COE)) /** * @brief Enable the clock reference detection. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) (RTC->CR |= (RTC_CR_REFCKON)) /** * @brief Disable the clock reference detection. * @param __HANDLE__ specifies the RTC handle. * @retval None */ #define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) (RTC->CR &= ~(RTC_CR_REFCKON)) /** * @brief Get the selected RTC shift operations flag status. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC shift operation Flag is pending or not. * This parameter can be: * @arg @ref RTC_FLAG_SHPF * @retval The state of __FLAG__ (TRUE or FALSE). */ #define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__), (__FLAG__))) /** * @} */ /* ------------------------------Tamper----------------------------------*/ /** @defgroup RTCEx_Tamper RTCEx tamper * @{ */ /** * @brief Enable the TAMP Tamper input detection. * @param __HANDLE__ specifies the RTC handle. * @param __TAMPER__ specifies the RTC Tamper source to be enabled. * This parameter can be any combination of the following values: * @arg RTC_TAMPER_ALL: All tampers * @arg RTC_TAMPER_1: Tamper1 * @arg RTC_TAMPER_2: Tamper2 * @arg RTC_TAMPER_3: Tamper3 * @arg RTC_TAMPER_4: Tamper4 * @arg RTC_TAMPER_5: Tamper5 * @retval None */ #define __HAL_RTC_TAMPER_ENABLE(__HANDLE__, __TAMPER__) (TAMP->CR1 |= (__TAMPER__)) /** * @brief Disable the TAMP Tamper input detection. * @param __HANDLE__ specifies the RTC handle. * @param __TAMPER__ specifies the RTC Tamper sources to be enabled. * This parameter can be any combination of the following values: * @arg RTC_TAMPER_ALL: All tampers * @arg RTC_TAMPER_1: Tamper1 * @arg RTC_TAMPER_2: Tamper2 * @arg RTC_TAMPER_3: Tamper3 * @arg RTC_TAMPER_4: Tamper4 * @arg RTC_TAMPER_5: Tamper5 */ #define __HAL_RTC_TAMPER_DISABLE(__HANDLE__, __TAMPER__) (TAMP->CR1 &= ~(__TAMPER__)) /**************************************************************************************************/ /** * @brief Enable the TAMP Tamper interrupt. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be enabled. * This parameter can be any combination of the following values: * @arg RTC_IT_TAMP_ALL: All tampers interrupts * @arg RTC_IT_TAMP_1: Tamper1 interrupt * @arg RTC_IT_TAMP_2: Tamper2 interrupt * @arg RTC_IT_TAMP_3: Tamper3 interrupt * @arg RTC_IT_TAMP_4: Tamper4 interrupt * @arg RTC_IT_TAMP_5: Tamper5 interrupt * @retval None */ #define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) (TAMP->IER |= (__INTERRUPT__)) /** * @brief Disable the TAMP Tamper interrupt. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC Tamper interrupt sources to be disabled. * This parameter can be any combination of the following values: * @arg RTC_IT_TAMP_ALL: All tampers interrupts * @arg RTC_IT_TAMP_1: Tamper1 interrupt * @arg RTC_IT_TAMP_2: Tamper2 interrupt * @arg RTC_IT_TAMP_3: Tamper3 interrupt * @arg RTC_IT_TAMP_4: Tamper4 interrupt * @arg RTC_IT_TAMP_5: Tamper5 interrupt * @retval None */ #define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) (TAMP->IER &= ~(__INTERRUPT__)) /**************************************************************************************************/ /** * @brief Check whether the specified RTC Tamper interrupt has occurred or not. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC Tamper interrupt to check. * This parameter can be: * @arg RTC_IT_TAMP_ALL: All tampers interrupts * @arg RTC_IT_TAMP_1: Tamper1 interrupt * @arg RTC_IT_TAMP_2: Tamper2 interrupt * @arg RTC_IT_TAMP_3: Tamper3 interrupt * @arg RTC_IT_TAMP_4: Tamper4 interrupt * @arg RTC_IT_TAMP_5: Tamper5 interrupt * @arg RTC_IT_INT_TAMP_ALL: All Internal Tamper interrupts * @arg RTC_IT_INT_TAMP_3: Internal Tamper3 interrupt * @arg RTC_IT_INT_TAMP_4: Internal Tamper4 interrupt * @arg RTC_IT_INT_TAMP_5: Internal Tamper5 interrupt * @arg RTC_IT_INT_TAMP_6: Internal Tamper6 interrupt * @retval The state of __FLAG__ (TRUE or FALSE). */ #define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) ((((TAMP->MISR) & (__INTERRUPT__)) != 0U) ? 1UL : 0UL) /** * @brief Check whether the specified RTC Tamper interrupt has been enabled or not. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC Tamper interrupt source to check. * This parameter can be: * @arg RTC_IT_TAMP_ALL: All tampers interrupts * @arg RTC_IT_TAMP_1: Tamper1 interrupt * @arg RTC_IT_TAMP_2: Tamper2 interrupt * @arg RTC_IT_TAMP_3: Tamper3 interrupt * @arg RTC_IT_TAMP_4: Tamper4 interrupt * @arg RTC_IT_TAMP_5: Tamper5 interrupt * @arg RTC_IT_INT_TAMP_ALL: All internal tampers interrupts * @arg RTC_IT_INT_TAMP_3: Internal Tamper3 interrupt * @arg RTC_IT_INT_TAMP_4: Internal Tamper4 interrupt * @arg RTC_IT_INT_TAMP_5: Internal Tamper5 interrupt * @arg RTC_IT_INT_TAMP_6: Internal Tamper6 interrupt * @retval The state of __FLAG__ (TRUE or FALSE). */ #define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((TAMP->IER) &\ (__INTERRUPT__)) != 0U) ? 1UL : 0UL) /** * @brief Get the selected RTC Tampers flag status. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC Tamper Flag is pending or not. * This parameter can be: * @arg RTC_FLAG_TAMP_ALL: All tampers flag * @arg RTC_FLAG_TAMP_1: Tamper1 flag * @arg RTC_FLAG_TAMP_2: Tamper2 flag * @arg RTC_FLAG_TAMP_3: Tamper3 flag * @arg RTC_FLAG_TAMP_4: Tamper4 flag * @arg RTC_FLAG_TAMP_5: Tamper5 flag * @arg RTC_FLAG_INT_TAMP_3: Internal Tamper3 flag * @arg RTC_FLAG_INT_TAMP_4: Internal Tamper4 flag * @arg RTC_FLAG_INT_TAMP_5: Internal Tamper5 flag * @arg RTC_FLAG_INT_TAMP_6: Internal Tamper6 flag * @retval The state of __FLAG__ (TRUE or FALSE). */ #define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((TAMP->SR) & (__FLAG__)) != 0U) /** * @brief Clear the RTC Tamper's pending flags. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC Tamper Flag to clear. * This parameter can be: * @arg RTC_FLAG_TAMP_ALL: All tampers flag * @arg RTC_FLAG_TAMP_1: Tamper1 flag * @arg RTC_FLAG_TAMP_2: Tamper2 flag * @arg RTC_FLAG_TAMP_3: Tamper3 flag * @arg RTC_FLAG_TAMP_4: Tamper4 flag * @arg RTC_FLAG_TAMP_5: Tamper5 flag * @arg RTC_FLAG_TAMP_6: Tamper6 flag * @arg RTC_FLAG_TAMP_7: Tamper7 flag * @arg RTC_FLAG_TAMP_8: Tamper8 flag * @arg RTC_FLAG_INT_TAMP_ALL: All Internal Tamper flags * @arg RTC_FLAG_INT_TAMP_1: Internal Tamper1 flag * @arg RTC_FLAG_INT_TAMP_2: Internal Tamper2 flag * @arg RTC_FLAG_INT_TAMP_3: Internal Tamper3 flag * @arg RTC_FLAG_INT_TAMP_5: Internal Tamper5 flag * @arg RTC_FLAG_INT_TAMP_6: Internal Tamper6 flag * @arg RTC_FLAG_INT_TAMP_7: Internal Tamper7 flag * @arg RTC_FLAG_INT_TAMP_8: Internal Tamper8 flag * @arg RTC_FLAG_INT_TAMP_9: Internal Tamper9 flag * @arg RTC_FLAG_INT_TAMP_11: Internal Tamper11 flag * @retval None */ #define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((TAMP->SCR) = (__FLAG__)) /** * @brief Enable interrupt on the RTC tamper associated Exti line. * @retval None */ #define __HAL_RTC_TAMPER_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_TAMPER_EVENT) /** * @brief Disable interrupt on the RTC tamper associated Exti line. * @retval None */ #define __HAL_RTC_TAMPER_EXTI_DISABLE_IT() (EXTI->IMR1 &= ~(RTC_EXTI_LINE_TAMPER_EVENT)) /** * @brief Enable event on the RTC tamper associated Exti line. * @retval None */ #define __HAL_RTC_TAMPER_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_TAMPER_EVENT) /** * @brief Disable event on the RTC tamper associated Exti line. * @retval None */ #define __HAL_RTC_TAMPER_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_TAMPER_EVENT)) /** * @} */ /* --------------------------------- SSR Underflow ---------------------------------*/ /** @defgroup RTCEx_SSR_Underflow RTC SSR Underflow * @{ */ /** * @brief Enable the RTC SSRU interrupt. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC SSRU interrupt sources to be enabled. * This parameter can be: * @arg @ref RTC_IT_SSRU SSRU interrupt * @retval None */ #define __HAL_RTC_SSRU_ENABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR |= (__INTERRUPT__)) /** * @brief Disable the RTC SSRU interrupt. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC SSRU interrupt sources to be disabled. * This parameter can be: * @arg @ref RTC_IT_SSRU SSRU interrupt * @retval None */ #define __HAL_RTC_SSRU_DISABLE_IT(__HANDLE__, __INTERRUPT__) (RTC->CR &= ~(__INTERRUPT__)) /** * @brief Check whether the specified RTC SSRU interrupt has occurred or not. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC SSRU interrupt to check. * This parameter can be: * @arg @ref RTC_IT_SSRU SSRU interrupt * @retval The state of __FLAG__ (TRUE or FALSE). */ #define __HAL_RTC_SSRU_GET_IT(__HANDLE__, __INTERRUPT__) (((RTC->MISR) & ((__INTERRUPT__) >> 1) != 0U) ? 1U : 0U) /** * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not. * @param __HANDLE__ specifies the RTC handle. * @param __INTERRUPT__ specifies the RTC Wake Up timer interrupt sources to check. * This parameter can be: * @arg @ref RTC_IT_SSRU SSRU interrupt * @retval The state of __FLAG__ (TRUE or FALSE). */ #define __HAL_RTC_SSRU_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((RTC->CR) & (__INTERRUPT__)) != 0U) ? 1U : 0U) /** * @brief Get the selected RTC SSRU's flag status. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC SSRU Flag is pending or not. * This parameter can be: * @arg @ref RTC_FLAG_SSRUF * @retval The state of __FLAG__ (TRUE or FALSE). */ #define __HAL_RTC_SSRU_GET_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_GET_FLAG((__HANDLE__), (__FLAG__))) /** * @brief Clear the RTC Wake Up timer's pending flags. * @param __HANDLE__ specifies the RTC handle. * @param __FLAG__ specifies the RTC SSRU Flag to clear. * This parameter can be: * @arg @ref RTC_FLAG_SSRUF * @retval None */ #define __HAL_RTC_SSRU_CLEAR_FLAG(__HANDLE__, __FLAG__) (__HAL_RTC_CLEAR_FLAG((__HANDLE__), RTC_CLEAR_SSRUF)) /* WAKE-UP TIMER EXTI */ /* ------------------ */ /** * @brief Enable interrupt on the RTC SSR Underflow associated Exti line. * @retval None */ #define __HAL_RTC_SSRU_EXTI_ENABLE_IT() (EXTI->IMR1 |= RTC_EXTI_LINE_SSRU_EVENT) /** * @brief Disable interrupt on the RTC SSR Underflow associated Exti line. * @retval None */ #define __HAL_RTC_SSRU_EXTI_DISABLE_IT() (EXTI->C1IMR1 &= ~(RTC_EXTI_LINE_SSRU_EVENT)) /** * @brief Enable event on the RTC SSR Underflow associated Exti line. * @retval None */ #define __HAL_RTC_SSRU_EXTI_ENABLE_EVENT() (EXTI->EMR1 |= RTC_EXTI_LINE_SSRU_EVENT) /** * @brief Disable event on the RTC SSR Underflow associated Exti line. * @retval None */ #define __HAL_RTC_SSRU_EXTI_DISABLE_EVENT() (EXTI->EMR1 &= ~(RTC_EXTI_LINE_SSRU_EVENT)) /** * @} */ /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions * @{ */ /* RTC TimeStamp functions *****************************************/ /** @defgroup RTCEx_Exported_Functions_Group1 Extended RTC TimeStamp functions * @{ */ HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_SetInternalTimeStamp(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTimeStamp(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(const RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format); void HAL_RTCEx_TimeStampIRQHandler(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc); /** * @} */ /* RTC Wake-up functions ******************************************************/ /** @defgroup RTCEx_Exported_Functions_Group2 Extended RTC Wake-up functions * @{ */ HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock, uint32_t WakeUpAutoClr); HAL_StatusTypeDef HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc); uint32_t HAL_RTCEx_GetWakeUpTimer(const RTC_HandleTypeDef *hrtc); void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); /** * @} */ /* Extended Control functions ************************************************/ /** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions * @{ */ HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue); HAL_StatusTypeDef HAL_RTCEx_SetLowPowerCalib(RTC_HandleTypeDef *hrtc, uint32_t LowPowerCalib); HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS); HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput); HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_SetSSRU_IT(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_DeactivateSSRU(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_SSRUIRQHandler(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_SSRUEventCallback(RTC_HandleTypeDef *hrtc); /** * @} */ /* Extended RTC features functions *******************************************/ /** @defgroup RTCEx_Exported_Functions_Group4 Extended features functions * @{ */ void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc); HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); /** * @} */ /** @defgroup RTCEx_Exported_Functions_Group5 Extended RTC Tamper functions * @{ */ HAL_StatusTypeDef HAL_RTCEx_SetTamper(const RTC_HandleTypeDef *hrtc, const RTC_TamperTypeDef *sTamper); HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(const RTC_HandleTypeDef *hrtc, const RTC_TamperTypeDef *sTamper); HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(const RTC_HandleTypeDef *hrtc, uint32_t Tamper); HAL_StatusTypeDef HAL_RTCEx_PollForTamperEvent(RTC_HandleTypeDef *hrtc, uint32_t Tamper, uint32_t Timeout); HAL_StatusTypeDef HAL_RTCEx_SetInternalTamper(const RTC_HandleTypeDef *hrtc, const RTC_InternalTamperTypeDef *sIntTamper); HAL_StatusTypeDef HAL_RTCEx_SetInternalTamper_IT(const RTC_HandleTypeDef *hrtc, const RTC_InternalTamperTypeDef *sIntTamper); HAL_StatusTypeDef HAL_RTCEx_DeactivateInternalTamper(const RTC_HandleTypeDef *hrtc, uint32_t IntTamper); HAL_StatusTypeDef HAL_RTCEx_PollForInternalTamperEvent(RTC_HandleTypeDef *hrtc, uint32_t IntTamper, uint32_t Timeout); void HAL_RTCEx_TamperIRQHandler(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_Tamper4EventCallback(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_Tamper5EventCallback(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_InternalTamper3EventCallback(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_InternalTamper4EventCallback(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_InternalTamper5EventCallback(RTC_HandleTypeDef *hrtc); void HAL_RTCEx_InternalTamper6EventCallback(RTC_HandleTypeDef *hrtc); /** * @} */ /** @defgroup RTCEx_Exported_Functions_Group6 Extended RTC Backup register functions * @{ */ void HAL_RTCEx_BKUPWrite(const RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data); uint32_t HAL_RTCEx_BKUPRead(const RTC_HandleTypeDef *hrtc, uint32_t BackupRegister); void HAL_RTCEx_BKUPErase(const RTC_HandleTypeDef *hrtc); /** * @} */ /** * @} */ /* Private types -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private constants ---------------------------------------------------------*/ /** @defgroup RTCEx_Private_Constants RTCEx Private Constants * @{ */ #define RTC_EXTI_LINE_ALARM_EVENT EXTI_IMR1_IM28 /*!< External interrupt line 28 Connected to the RTC Alarm event */ #define RTC_EXTI_LINE_TIMESTAMP_EVENT EXTI_IMR1_IM28 /*!< External interrupt line 28 Connected to the RTC Time Stamp events */ #define RTC_EXTI_LINE_WAKEUPTIMER_EVENT EXTI_IMR1_IM28 /*!< External interrupt line 28 Connected to the RTC Wakeup event */ #define RTC_EXTI_LINE_TAMPER_EVENT EXTI_IMR1_IM29 /*!< External interrupt line 29 Connected to the RTC tamper events */ #define RTC_EXTI_LINE_SSRU_EVENT EXTI_IMR1_IM28 /*!< External interrupt line 28 Connected to the RTC SSR Underflow event */ /** * @} */ /* Private macros ------------------------------------------------------------*/ /** @defgroup RTCEx_Private_Macros RTCEx Private Macros * @{ */ /** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters * @{ */ #define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \ ((EDGE) == RTC_TIMESTAMPEDGE_FALLING)) #define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT)) #define IS_RTC_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \ ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE)) #define IS_RTC_TAMPER_TAMPERDETECTIONOUTPUT(MODE) (((MODE) == RTC_TAMPERDETECTIONOUTPUT_ENABLE) || \ ((MODE) == RTC_TAMPERDETECTIONOUTPUT_DISABLE)) #define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \ ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \ ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS)) #define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= RTC_WUTR_WUT) #define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \ ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC)) #define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \ ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET)) #define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= RTC_CALR_CALM) #define IS_RTC_LOW_POWER_CALIB(LPCAL) (((LPCAL) == RTC_LPCAL_SET) || \ ((LPCAL) == RTC_LPCAL_RESET)) #define IS_RTC_TAMPER(__TAMPER__) ((((__TAMPER__) & RTC_TAMPER_ALL) != 0x00U) && \ (((__TAMPER__) & ~RTC_TAMPER_ALL) == 0x00U)) #define IS_RTC_INTERNAL_TAMPER(__INT_TAMPER__) ((((__INT_TAMPER__) & RTC_INT_TAMPER_ALL) != 0x00U) && \ (((__INT_TAMPER__) & ~RTC_INT_TAMPER_ALL) == 0x00U)) #define IS_RTC_TAMPER_TRIGGER(__TRIGGER__) (((__TRIGGER__) == RTC_TAMPERTRIGGER_RISINGEDGE) || \ ((__TRIGGER__) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \ ((__TRIGGER__) == RTC_TAMPERTRIGGER_LOWLEVEL) || \ ((__TRIGGER__) == RTC_TAMPERTRIGGER_HIGHLEVEL)) #define IS_RTC_TAMPER_ERASE_MODE(__MODE__) (((__MODE__) == RTC_TAMPER_ERASE_BACKUP_ENABLE) || \ ((__MODE__) == RTC_TAMPER_ERASE_BACKUP_DISABLE)) #define IS_RTC_TAMPER_MASKFLAG_STATE(__STATE__) (((__STATE__) == RTC_TAMPERMASK_FLAG_ENABLE) || \ ((__STATE__) == RTC_TAMPERMASK_FLAG_DISABLE)) #define IS_RTC_TAMPER_FILTER(__FILTER__) (((__FILTER__) == RTC_TAMPERFILTER_DISABLE) || \ ((__FILTER__) == RTC_TAMPERFILTER_2SAMPLE) || \ ((__FILTER__) == RTC_TAMPERFILTER_4SAMPLE) || \ ((__FILTER__) == RTC_TAMPERFILTER_8SAMPLE)) #define IS_RTC_TAMPER_SAMPLING_FREQ(__FREQ__) (((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \ ((__FREQ__) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256)) #define IS_RTC_TAMPER_PRECHARGE_DURATION(__DURATION__) (((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \ ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \ ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \ ((__DURATION__) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK)) #define IS_RTC_TAMPER_PULLUP_STATE(__STATE__) (((__STATE__) == RTC_TAMPER_PULLUP_ENABLE) || \ ((__STATE__) == RTC_TAMPER_PULLUP_DISABLE)) #define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) \ (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \ ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE)) #define IS_RTC_BKP(__BKP__) ((__BKP__) < RTC_BKP_NUMBER) #define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \ ((SEL) == RTC_SHIFTADD1S_SET)) #define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= RTC_SHIFTR_SUBFS) #define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \ ((OUTPUT) == RTC_CALIBOUTPUT_1HZ)) #define IS_RTC_BINARY_MODE(MODE) (((MODE) == RTC_BINARY_NONE) || \ ((MODE) == RTC_BINARY_ONLY) || \ ((MODE) == RTC_BINARY_MIX )) #define IS_RTC_BINARY_MIX_BCDU(BDCU) (((BDCU) == RTC_BINARY_MIX_BCDU_0) || \ ((BDCU) == RTC_BINARY_MIX_BCDU_1) || \ ((BDCU) == RTC_BINARY_MIX_BCDU_2) || \ ((BDCU) == RTC_BINARY_MIX_BCDU_3) || \ ((BDCU) == RTC_BINARY_MIX_BCDU_4) || \ ((BDCU) == RTC_BINARY_MIX_BCDU_5) || \ ((BDCU) == RTC_BINARY_MIX_BCDU_6) || \ ((BDCU) == RTC_BINARY_MIX_BCDU_7)) #define IS_RTC_ALARM_SUB_SECOND_BINARY_MASK(MASK) (((MASK) == 0u) || \ (((MASK) >= RTC_ALARMSUBSECONDBINMASK_SS31_1) && \ ((MASK) <= RTC_ALARMSUBSECONDBINMASK_NONE))) #define IS_RTC_ALARMSUBSECONDBIN_AUTOCLR(SEL) (((SEL) == RTC_ALARMSUBSECONDBIN_AUTOCLR_NO) || \ ((SEL) == RTC_ALARMSUBSECONDBIN_AUTOCLR_YES)) /** * @} */ /** * @} */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32U0xx_HAL_RTC_EX_H */