diff options
Diffstat (limited to 'ChibiOS_16.1.5/community/demos/TIVA')
27 files changed, 0 insertions, 6487 deletions
diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/.cproject b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/.cproject deleted file mode 100644 index 109f8d7..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/.cproject +++ /dev/null @@ -1,52 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> - <storageModule moduleId="org.eclipse.cdt.core.settings"> - <cconfiguration id="0.741718742"> - <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.741718742" moduleId="org.eclipse.cdt.core.settings" name="Default"> - <externalSettings/> - <extensions> - <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - </extensions> - </storageModule> - <storageModule moduleId="cdtBuildSystem" version="4.0.0"> - <configuration buildProperties="" description="" id="0.741718742" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg"> - <folderInfo id="0.741718742." name="/" resourcePath=""> - <toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.166048546" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain"> - <targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.166048546.966296665" name=""/> - <builder id="org.eclipse.cdt.build.core.settings.default.builder.951458629" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" superClass="org.eclipse.cdt.build.core.settings.default.builder"/> - <tool id="org.eclipse.cdt.build.core.settings.holder.libs.13384115" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/> - <tool id="org.eclipse.cdt.build.core.settings.holder.1729312416" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder"> - <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1910021363" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> - </tool> - <tool id="org.eclipse.cdt.build.core.settings.holder.1885106767" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder"> - <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.451641794" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> - </tool> - <tool id="org.eclipse.cdt.build.core.settings.holder.935666042" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder"> - <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1748431457" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> - </tool> - </toolChain> - </folderInfo> - </configuration> - </storageModule> - <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> - </cconfiguration> - </storageModule> - <storageModule moduleId="cdtBuildSystem" version="4.0.0"> - <project id="RT-TM4C123G-LAUNCHPAD.null.1645449822" name="RT-TM4C123G-LAUNCHPAD"/> - </storageModule> - <storageModule moduleId="scannerConfiguration"> - <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> - <scannerConfigBuildInfo instanceId="0.114656749"> - <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/> - </scannerConfigBuildInfo> - <scannerConfigBuildInfo instanceId="0.741718742"> - <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> - </scannerConfigBuildInfo> - </storageModule> - <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/> -</cproject> diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/.project b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/.project deleted file mode 100644 index a6f7408..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/.project +++ /dev/null @@ -1,102 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<projectDescription> - <name>RT-TM4C123G-LAUNCHPAD</name> - <comment></comment> - <projects> - </projects> - <buildSpec> - <buildCommand> - <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name> - <triggers>clean,full,incremental,</triggers> - <arguments> - <dictionary> - <key>?name?</key> - <value></value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.append_environment</key> - <value>true</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.autoBuildTarget</key> - <value>all</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.buildArguments</key> - <value>-j1</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.buildCommand</key> - <value>make</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.cleanBuildTarget</key> - <value>clean</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.contents</key> - <value>org.eclipse.cdt.make.core.activeConfigSettings</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.enableAutoBuild</key> - <value>false</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.enableCleanBuild</key> - <value>true</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.enableFullBuild</key> - <value>true</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.fullBuildTarget</key> - <value>all</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.stopOnError</key> - <value>true</value> - </dictionary> - <dictionary> - <key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key> - <value>true</value> - </dictionary> - </arguments> - </buildCommand> - <buildCommand> - <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name> - <triggers>full,incremental,</triggers> - <arguments> - </arguments> - </buildCommand> - </buildSpec> - <natures> - <nature>org.eclipse.cdt.core.cnature</nature> - <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature> - <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature> - <nature>org.eclipse.cdt.core.ccnature</nature> - </natures> - <linkedResources> - <link> - <name>board</name> - <type>2</type> - <locationURI>CHIBIOS3/community/os/hal/boards/TI_TM4C123G_LAUNCHPAD</locationURI> - </link> - <link> - <name>os</name> - <type>2</type> - <locationURI>CHIBIOS3/os</locationURI> - </link> - <link> - <name>test</name> - <type>2</type> - <locationURI>CHIBIOS3/test</locationURI> - </link> - </linkedResources> - <variableList> - <variable> - <name>CHIBIOS3</name> - <value>file:/C:/ChibiStudio/chibios3</value> - </variable> - </variableList> -</projectDescription> diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/Makefile b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/Makefile deleted file mode 100644 index 322b39b..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/Makefile +++ /dev/null @@ -1,213 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = hard -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c123x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/TM4C123x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/TI_TM4C123G_LAUNCHPAD/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/TM4C123xH6.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/chconf.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/chconf.h deleted file mode 100644 index 25e39f6..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/chconf.h +++ /dev/null @@ -1,509 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch deleted file mode 100644 index 8772f9c..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/debug/OpenOCD on ICDI (prompts for .cfg target configuration).launch +++ /dev/null @@ -1,10 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<launchConfiguration type="org.eclipse.ui.externaltools.ProgramLaunchConfigurationType"> -<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> -<listEntry value="org.eclipse.ui.externaltools.launchGroup"/> -</listAttribute> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LAUNCH_CONFIGURATION_BUILD_SCOPE" value="${none}"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_LOCATION" value="${eclipse_home}\..\tools\openocd\bin\openocd.exe"/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_TOOL_ARGUMENTS" value="-c "telnet_port 4444" -f "interface/ti-icdi.cfg" -f "${file_prompt}""/> -<stringAttribute key="org.eclipse.ui.externaltools.ATTR_WORKING_DIRECTORY" value="${eclipse_home}\..\tools\openocd\bin\"/> -</launchConfiguration> diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/debug/RT-TM4C123G-LAUNCHPAD (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/debug/RT-TM4C123G-LAUNCHPAD (OpenOCD, Flash and Run).launch deleted file mode 100644 index 552223c..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/debug/RT-TM4C123G-LAUNCHPAD (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType"> -<stringAttribute key="bad_container_name" value="\RT-TM4C123G-LAUNCHPAD\debug"/> -<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/> -<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/> -<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/> -<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="monitor reset halt monitor reset init"/> -<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/> -<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/> -<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/> -<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/> -<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/> -<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/> -<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/> -<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/> -<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/> -<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/> -<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/> -<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/> -<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/> -<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/> -<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/> -<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/> -<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?><contentList/>"/> -<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <globalVariableList/> "/> -<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <memoryBlockExpressionList/> "/> -<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/> -<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-TM4C123G-LAUNCHPAD"/> -<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/> -<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/> -<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS"> -<listEntry value="/RT-TM4C123G-LAUNCHPAD"/> -</listAttribute> -<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES"> -<listEntry value="4"/> -</listAttribute> -<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> -<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/> -</listAttribute> -</launchConfiguration> diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/halconf.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/halconf.h deleted file mode 100644 index cd6edf3..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/halconf.h +++ /dev/null @@ -1,294 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/main.c b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/main.c deleted file mode 100644 index 6723c62..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/main.c +++ /dev/null @@ -1,103 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "ch_test.h" - -typedef struct led_config -{ - ioportid_t port; - uint32_t sleep; - uint8_t pin; -} led_config_t; - -/* - * LED blinker thread. - */ -static THD_WORKING_AREA(waBlinkLedRed, 128); -static THD_WORKING_AREA(waBlinkLedGreen, 128); -static THD_WORKING_AREA(waBlinkLedBlue, 128); -static THD_FUNCTION(blinkLed, arg) { - led_config_t *ledConfig = (led_config_t*) arg; - - chRegSetThreadName("Blinker"); - - palSetPadMode(ledConfig->port, ledConfig->pin, PAL_MODE_OUTPUT_PUSHPULL); - - while (TRUE) { - chThdSleepMilliseconds(ledConfig->sleep); - palTogglePad(ledConfig->port, ledConfig->pin); - } -} - -/* - * Application entry point. - */ -int main(void) -{ - led_config_t ledRed, ledGreen, ledBlue; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* Configure RX and TX pins for UART0.*/ - palSetPadMode(GPIOA, GPIOA_UART0_RX, PAL_MODE_INPUT | PAL_MODE_ALTERNATE(1)); - palSetPadMode(GPIOA, GPIOA_UART0_TX, PAL_MODE_INPUT | PAL_MODE_ALTERNATE(1)); - - /* Start the serial driver with the default configuration.*/ - sdStart(&SD1, NULL); - - if (!palReadPad(GPIOF, GPIOF_SW2)) { - test_execute((BaseSequentialStream *)&SD1); - } - - ledRed.port = GPIOF; - ledRed.pin = GPIOF_LED_RED; - ledRed.sleep = 100; - - ledGreen.port = GPIOF; - ledGreen.pin = GPIOF_LED_GREEN; - ledGreen.sleep = 101; - - ledBlue.port = GPIOF; - ledBlue.pin = GPIOF_LED_BLUE; - ledBlue.sleep = 102; - - /* Creating the blinker threads.*/ - chThdCreateStatic(waBlinkLedRed, sizeof(waBlinkLedRed), NORMALPRIO, blinkLed, - &ledRed); - - chThdCreateStatic(waBlinkLedGreen, sizeof(waBlinkLedGreen), NORMALPRIO, - blinkLed, &ledGreen); - - chThdCreateStatic(waBlinkLedBlue, sizeof(waBlinkLedBlue), NORMALPRIO, - blinkLed, &ledBlue); - - /* Normal main() thread activity.*/ - while (TRUE) { - chThdSleepMilliseconds(100); - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/mcuconf.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/mcuconf.h deleted file mode 100644 index 926cab1..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C123G-LAUNCHPAD/mcuconf.h +++ /dev/null @@ -1,144 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * TM4C123x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 7...0 Lowest...Highest. - */ - -#define TM4C123x_MCUCONF - -/* - * HAL driver system settings. - */ -#define TIVA_OSCSRC TIVA_RCC2_OSCSRC2_MOSC -#define TIVA_MOSC_ENABLE TRUE -#define TIVA_DIV400_VALUE 1 -#define TIVA_SYSDIV_VALUE 2 -#define TIVA_USESYSDIV_ENABLE FALSE -#define TIVA_SYSDIV2LSB_ENABLE FALSE -#define TIVA_BYPASS_VALUE 0 -#define TIVA_PWM_FIELDS (TIVA_RCC_USEPWMDIV | \ - TIVA_RCC_PWMDIV_8) - -/* - * GPIO driver system settings. - */ -#define TIVA_GPIO_GPIOA_USE_AHB TRUE -#define TIVA_GPIO_GPIOB_USE_AHB TRUE -#define TIVA_GPIO_GPIOC_USE_AHB TRUE -#define TIVA_GPIO_GPIOD_USE_AHB TRUE -#define TIVA_GPIO_GPIOE_USE_AHB TRUE -#define TIVA_GPIO_GPIOF_USE_AHB TRUE - -/* - * GPT driver system settings. - */ -#define TIVA_GPT_USE_GPT0 FALSE -#define TIVA_GPT_USE_GPT1 FALSE -#define TIVA_GPT_USE_GPT2 FALSE -#define TIVA_GPT_USE_GPT3 FALSE -#define TIVA_GPT_USE_GPT4 FALSE -#define TIVA_GPT_USE_GPT5 FALSE -#define TIVA_GPT_USE_WGPT0 FALSE -#define TIVA_GPT_USE_WGPT1 FALSE -#define TIVA_GPT_USE_WGPT2 FALSE -#define TIVA_GPT_USE_WGPT3 FALSE -#define TIVA_GPT_USE_WGPT4 FALSE -#define TIVA_GPT_USE_WGPT5 FALSE - -#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_WGPT5A_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define TIVA_I2C_USE_I2C0 FALSE -#define TIVA_I2C_USE_I2C1 FALSE -#define TIVA_I2C_USE_I2C2 FALSE -#define TIVA_I2C_USE_I2C3 FALSE -#define TIVA_I2C_USE_I2C4 FALSE -#define TIVA_I2C_USE_I2C5 FALSE -#define TIVA_I2C_USE_I2C6 FALSE -#define TIVA_I2C_USE_I2C7 FALSE -#define TIVA_I2C_I2C0_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C1_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C2_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C3_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C4_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C5_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C6_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C7_IRQ_PRIORITY 4 - -/* - * PWM driver system settings. - */ -#define TIVA_PWM_USE_PWM0 FALSE -#define TIVA_PWM_USE_PWM1 FALSE -#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM1_3_IRQ_PRIORITY 4 - -/* - * SERIAL driver system settings. - */ -#define TIVA_SERIAL_USE_UART0 TRUE -#define TIVA_SERIAL_USE_UART1 FALSE -#define TIVA_SERIAL_USE_UART2 FALSE -#define TIVA_SERIAL_USE_UART3 FALSE -#define TIVA_SERIAL_USE_UART4 FALSE -#define TIVA_SERIAL_USE_UART5 FALSE -#define TIVA_SERIAL_USE_UART6 FALSE -#define TIVA_SERIAL_USE_UART7 FALSE -#define TIVA_SERIAL_UART0_PRIORITY 5 -#define TIVA_SERIAL_UART1_PRIORITY 5 -#define TIVA_SERIAL_UART2_PRIORITY 5 -#define TIVA_SERIAL_UART3_PRIORITY 5 -#define TIVA_SERIAL_UART4_PRIORITY 5 -#define TIVA_SERIAL_UART5_PRIORITY 5 -#define TIVA_SERIAL_UART6_PRIORITY 5 -#define TIVA_SERIAL_UART7_PRIORITY 5 - -/* - * ST driver system settings. - */ -#define TIVA_ST_IRQ_PRIORITY 2 -#define TIVA_ST_USE_WIDE_TIMER TRUE -#define TIVA_ST_TIMER_NUMBER 5 -#define TIVA_ST_TIMER_LETTER A diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/.cproject b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/.cproject deleted file mode 100644 index efeab1b..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/.cproject +++ /dev/null @@ -1,63 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> - <storageModule moduleId="org.eclipse.cdt.core.settings"> - <cconfiguration id="0.114656749"> - <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default"> - <externalSettings/> - <extensions> - <extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - </extensions> - </storageModule> - <storageModule moduleId="cdtBuildSystem" version="4.0.0"> - <configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg"> - <folderInfo id="0.114656749." name="/" resourcePath=""> - <toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain"> - <targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/> - <builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/> - <tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/> - <tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder"> - <option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.890534880" name="Undefined Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths" valueType="undefIncludePath"> - <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios/os/hal/ports/TIVA/LLD/GPIOv1"/> - <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios/os/hal/ports/TIVA/LLD/UARTv1"/> - </option> - <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> - </tool> - <tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder"> - <option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.262251028" name="Undefined Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths" valueType="undefIncludePath"> - <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios/os/hal/ports/TIVA/LLD/GPIOv1"/> - <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios/os/hal/ports/TIVA/LLD/UARTv1"/> - </option> - <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> - </tool> - <tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder"> - <option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.757265410" name="Undefined Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths" valueType="undefIncludePath"> - <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios/os/hal/ports/TIVA/LLD/GPIOv1"/> - <listOptionValue builtIn="false" value="C:/ChibiStudio/chibios/os/hal/ports/TIVA/LLD/UARTv1"/> - </option> - <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> - </tool> - </toolChain> - </folderInfo> - </configuration> - </storageModule> - <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> - </cconfiguration> - </storageModule> - <storageModule moduleId="cdtBuildSystem" version="4.0.0"> - <project id="ARMCM4-STM32F407-DISCOVERY.null.1703860681" name="ARMCM4-STM32F407-DISCOVERY"/> - </storageModule> - <storageModule moduleId="scannerConfiguration"> - <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> - <scannerConfigBuildInfo instanceId="0.114656749"> - <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/> - </scannerConfigBuildInfo> - </storageModule> - <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/> - <storageModule moduleId="refreshScope"/> - <storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/> -</cproject> diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/.project b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/.project deleted file mode 100644 index a380601..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/.project +++ /dev/null @@ -1,54 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<projectDescription> - <name>RT-TM4C1294-LAUNCHPAD-LWIP</name> - <comment></comment> - <projects> - </projects> - <buildSpec> - <buildCommand> - <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name> - <triggers>clean,full,incremental,</triggers> - <arguments> - </arguments> - </buildCommand> - <buildCommand> - <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name> - <triggers>full,incremental,</triggers> - <arguments> - </arguments> - </buildCommand> - </buildSpec> - <natures> - <nature>org.eclipse.cdt.core.cnature</nature> - <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature> - <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature> - </natures> - <linkedResources> - <link> - <name>board</name> - <type>2</type> - <locationURI>CHIBIOS3/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD</locationURI> - </link> - <link> - <name>community_os</name> - <type>2</type> - <locationURI>CHIBIOS3/community</locationURI> - </link> - <link> - <name>os</name> - <type>2</type> - <locationURI>CHIBIOS3/os</locationURI> - </link> - <link> - <name>test</name> - <type>2</type> - <locationURI>CHIBIOS3/test</locationURI> - </link> - </linkedResources> - <variableList> - <variable> - <name>CHIBIOS3</name> - <value>file:/C:/ChibiStudio/chibios3</value> - </variable> - </variableList> -</projectDescription> diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/Makefile b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/Makefile deleted file mode 100644 index e5cd47a..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/Makefile +++ /dev/null @@ -1,216 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = hard -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c129x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/TM4C129x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/os/various/lwip_bindings/lwip.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/TM4C129xNC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(LWSRC) \ - $(CHIBIOS)/os/various/evtimer.c \ - main.c \ - web/web.c \ - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various $(LWINC) - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/chconf.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/chconf.h deleted file mode 100644 index dd5025e..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/chconf.h +++ /dev/null @@ -1,509 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 80000000 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE TRUE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/debug/RT-TM4C1294-LAUNCHPAD-LWIP (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/debug/RT-TM4C1294-LAUNCHPAD-LWIP (OpenOCD, Flash and Run).launch deleted file mode 100644 index c9016ed..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/debug/RT-TM4C1294-LAUNCHPAD-LWIP (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType"> -<stringAttribute key="bad_container_name" value="\TM4C129x-ETH\debu"/> -<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/> -<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/> -<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/> -<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="monitor reset halt monitor reset init cortex_m maskisr auto"/> -<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/> -<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/> -<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/> -<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/> -<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/> -<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/> -<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/> -<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/> -<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/> -<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/> -<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/> -<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/> -<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/> -<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/> -<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/> -<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/> -<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/> -<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?><contentList><content id="dmaris-VectorE0-(format)" val="2"/></contentList>"/> -<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <globalVariableList/> "/> -<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="<?xml version="1.0" encoding="UTF-8" standalone="no"?> <memoryBlockExpressionList/> "/> -<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/> -<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-TM4C1294-LAUNCHPAD-LWIP"/> -<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/> -<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/> -<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS"> -<listEntry value="/RT-TM4C1294-LAUNCHPAD-LWIP"/> -</listAttribute> -<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES"> -<listEntry value="4"/> -</listAttribute> -<listAttribute key="org.eclipse.debug.ui.favoriteGroups"> -<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/> -</listAttribute> -</launchConfiguration> diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/halconf.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/halconf.h deleted file mode 100644 index 6e62629..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/halconf.h +++ /dev/null @@ -1,294 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC TRUE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 64 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/lwipopts.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/lwipopts.h deleted file mode 100644 index c4829fa..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/lwipopts.h +++ /dev/null @@ -1,2127 +0,0 @@ -/** - * @file - * - * lwIP Options Configuration - */ - -/* - * Copyright (c) 2001-2004 Swedish Institute of Computer Science. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. The name of the author may not be used to endorse or promote products - * derived from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT - * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, - * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT - * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING - * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY - * OF SUCH DAMAGE. - * - * This file is part of the lwIP TCP/IP stack. - * - * Author: Adam Dunkels <adam@sics.se> - * - */ -#ifndef __LWIPOPT_H__ -#define __LWIPOPT_H__ - - -/* - ----------------------------------------------- - ---------- Platform specific locking ---------- - ----------------------------------------------- -*/ - -/** - * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain - * critical regions during buffer allocation, deallocation and memory - * allocation and deallocation. - */ -#ifndef SYS_LIGHTWEIGHT_PROT -#define SYS_LIGHTWEIGHT_PROT 0 -#endif - -/** - * NO_SYS==1: Provides VERY minimal functionality. Otherwise, - * use lwIP facilities. - */ -#ifndef NO_SYS -#define NO_SYS 0 -#endif - -/** - * NO_SYS_NO_TIMERS==1: Drop support for sys_timeout when NO_SYS==1 - * Mainly for compatibility to old versions. - */ -#ifndef NO_SYS_NO_TIMERS -#define NO_SYS_NO_TIMERS 0 -#endif - -/** - * MEMCPY: override this if you have a faster implementation at hand than the - * one included in your C library - */ -#ifndef MEMCPY -#define MEMCPY(dst,src,len) memcpy(dst,src,len) -#endif - -/** - * SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a - * call to memcpy() if the length is known at compile time and is small. - */ -#ifndef SMEMCPY -#define SMEMCPY(dst,src,len) memcpy(dst,src,len) -#endif - -/* - ------------------------------------ - ---------- Memory options ---------- - ------------------------------------ -*/ -/** - * MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library - * instead of the lwip internal allocator. Can save code size if you - * already use it. - */ -#ifndef MEM_LIBC_MALLOC -#define MEM_LIBC_MALLOC 0 -#endif - -/** -* MEMP_MEM_MALLOC==1: Use mem_malloc/mem_free instead of the lwip pool allocator. -* Especially useful with MEM_LIBC_MALLOC but handle with care regarding execution -* speed and usage from interrupts! -*/ -#ifndef MEMP_MEM_MALLOC -#define MEMP_MEM_MALLOC 0 -#endif - -/** - * MEM_ALIGNMENT: should be set to the alignment of the CPU - * 4 byte alignment -> #define MEM_ALIGNMENT 4 - * 2 byte alignment -> #define MEM_ALIGNMENT 2 - */ -#ifndef MEM_ALIGNMENT -#define MEM_ALIGNMENT 4 -#endif - -/** - * MEM_SIZE: the size of the heap memory. If the application will send - * a lot of data that needs to be copied, this should be set high. - */ -#ifndef MEM_SIZE -#define MEM_SIZE 1600 -#endif - -/** - * MEMP_SEPARATE_POOLS: if defined to 1, each pool is placed in its own array. - * This can be used to individually change the location of each pool. - * Default is one big array for all pools - */ -#ifndef MEMP_SEPARATE_POOLS -#define MEMP_SEPARATE_POOLS 0 -#endif - -/** - * MEMP_OVERFLOW_CHECK: memp overflow protection reserves a configurable - * amount of bytes before and after each memp element in every pool and fills - * it with a prominent default value. - * MEMP_OVERFLOW_CHECK == 0 no checking - * MEMP_OVERFLOW_CHECK == 1 checks each element when it is freed - * MEMP_OVERFLOW_CHECK >= 2 checks each element in every pool every time - * memp_malloc() or memp_free() is called (useful but slow!) - */ -#ifndef MEMP_OVERFLOW_CHECK -#define MEMP_OVERFLOW_CHECK 0 -#endif - -/** - * MEMP_SANITY_CHECK==1: run a sanity check after each memp_free() to make - * sure that there are no cycles in the linked lists. - */ -#ifndef MEMP_SANITY_CHECK -#define MEMP_SANITY_CHECK 0 -#endif - -/** - * MEM_USE_POOLS==1: Use an alternative to malloc() by allocating from a set - * of memory pools of various sizes. When mem_malloc is called, an element of - * the smallest pool that can provide the length needed is returned. - * To use this, MEMP_USE_CUSTOM_POOLS also has to be enabled. - */ -#ifndef MEM_USE_POOLS -#define MEM_USE_POOLS 0 -#endif - -/** - * MEM_USE_POOLS_TRY_BIGGER_POOL==1: if one malloc-pool is empty, try the next - * bigger pool - WARNING: THIS MIGHT WASTE MEMORY but it can make a system more - * reliable. */ -#ifndef MEM_USE_POOLS_TRY_BIGGER_POOL -#define MEM_USE_POOLS_TRY_BIGGER_POOL 0 -#endif - -/** - * MEMP_USE_CUSTOM_POOLS==1: whether to include a user file lwippools.h - * that defines additional pools beyond the "standard" ones required - * by lwIP. If you set this to 1, you must have lwippools.h in your - * inlude path somewhere. - */ -#ifndef MEMP_USE_CUSTOM_POOLS -#define MEMP_USE_CUSTOM_POOLS 0 -#endif - -/** - * Set this to 1 if you want to free PBUF_RAM pbufs (or call mem_free()) from - * interrupt context (or another context that doesn't allow waiting for a - * semaphore). - * If set to 1, mem_malloc will be protected by a semaphore and SYS_ARCH_PROTECT, - * while mem_free will only use SYS_ARCH_PROTECT. mem_malloc SYS_ARCH_UNPROTECTs - * with each loop so that mem_free can run. - * - * ATTENTION: As you can see from the above description, this leads to dis-/ - * enabling interrupts often, which can be slow! Also, on low memory, mem_malloc - * can need longer. - * - * If you don't want that, at least for NO_SYS=0, you can still use the following - * functions to enqueue a deallocation call which then runs in the tcpip_thread - * context: - * - pbuf_free_callback(p); - * - mem_free_callback(m); - */ -#ifndef LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT -#define LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT 0 -#endif - -/* - ------------------------------------------------ - ---------- Internal Memory Pool Sizes ---------- - ------------------------------------------------ -*/ -/** - * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF). - * If the application sends a lot of data out of ROM (or other static memory), - * this should be set high. - */ -#ifndef MEMP_NUM_PBUF -#define MEMP_NUM_PBUF 16 -#endif - -/** - * MEMP_NUM_RAW_PCB: Number of raw connection PCBs - * (requires the LWIP_RAW option) - */ -#ifndef MEMP_NUM_RAW_PCB -#define MEMP_NUM_RAW_PCB 4 -#endif - -/** - * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One - * per active UDP "connection". - * (requires the LWIP_UDP option) - */ -#ifndef MEMP_NUM_UDP_PCB -#define MEMP_NUM_UDP_PCB 4 -#endif - -/** - * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections. - * (requires the LWIP_TCP option) - */ -#ifndef MEMP_NUM_TCP_PCB -#define MEMP_NUM_TCP_PCB 5 -#endif - -/** - * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections. - * (requires the LWIP_TCP option) - */ -#ifndef MEMP_NUM_TCP_PCB_LISTEN -#define MEMP_NUM_TCP_PCB_LISTEN 8 -#endif - -/** - * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments. - * (requires the LWIP_TCP option) - */ -#ifndef MEMP_NUM_TCP_SEG -#define MEMP_NUM_TCP_SEG 16 -#endif - -/** - * MEMP_NUM_REASSDATA: the number of IP packets simultaneously queued for - * reassembly (whole packets, not fragments!) - */ -#ifndef MEMP_NUM_REASSDATA -#define MEMP_NUM_REASSDATA 5 -#endif - -/** - * MEMP_NUM_FRAG_PBUF: the number of IP fragments simultaneously sent - * (fragments, not whole packets!). - * This is only used with IP_FRAG_USES_STATIC_BUF==0 and - * LWIP_NETIF_TX_SINGLE_PBUF==0 and only has to be > 1 with DMA-enabled MACs - * where the packet is not yet sent when netif->output returns. - */ -#ifndef MEMP_NUM_FRAG_PBUF -#define MEMP_NUM_FRAG_PBUF 15 -#endif - -/** - * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing - * packets (pbufs) that are waiting for an ARP request (to resolve - * their destination address) to finish. - * (requires the ARP_QUEUEING option) - */ -#ifndef MEMP_NUM_ARP_QUEUE -#define MEMP_NUM_ARP_QUEUE 30 -#endif - -/** - * MEMP_NUM_IGMP_GROUP: The number of multicast groups whose network interfaces - * can be members et the same time (one per netif - allsystems group -, plus one - * per netif membership). - * (requires the LWIP_IGMP option) - */ -#ifndef MEMP_NUM_IGMP_GROUP -#define MEMP_NUM_IGMP_GROUP 8 -#endif - -/** - * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts. - * (requires NO_SYS==0) - * The default number of timeouts is calculated here for all enabled modules. - * The formula expects settings to be either '0' or '1'. - */ -#ifndef MEMP_NUM_SYS_TIMEOUT -#define MEMP_NUM_SYS_TIMEOUT (LWIP_TCP + IP_REASSEMBLY + LWIP_ARP + (2*LWIP_DHCP) + LWIP_AUTOIP + LWIP_IGMP + LWIP_DNS + PPP_SUPPORT) -#endif - -/** - * MEMP_NUM_NETBUF: the number of struct netbufs. - * (only needed if you use the sequential API, like api_lib.c) - */ -#ifndef MEMP_NUM_NETBUF -#define MEMP_NUM_NETBUF 2 -#endif - -/** - * MEMP_NUM_NETCONN: the number of struct netconns. - * (only needed if you use the sequential API, like api_lib.c) - */ -#ifndef MEMP_NUM_NETCONN -#define MEMP_NUM_NETCONN 4 -#endif - -/** - * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used - * for callback/timeout API communication. - * (only needed if you use tcpip.c) - */ -#ifndef MEMP_NUM_TCPIP_MSG_API -#define MEMP_NUM_TCPIP_MSG_API 8 -#endif - -/** - * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used - * for incoming packets. - * (only needed if you use tcpip.c) - */ -#ifndef MEMP_NUM_TCPIP_MSG_INPKT -#define MEMP_NUM_TCPIP_MSG_INPKT 8 -#endif - -/** - * MEMP_NUM_SNMP_NODE: the number of leafs in the SNMP tree. - */ -#ifndef MEMP_NUM_SNMP_NODE -#define MEMP_NUM_SNMP_NODE 50 -#endif - -/** - * MEMP_NUM_SNMP_ROOTNODE: the number of branches in the SNMP tree. - * Every branch has one leaf (MEMP_NUM_SNMP_NODE) at least! - */ -#ifndef MEMP_NUM_SNMP_ROOTNODE -#define MEMP_NUM_SNMP_ROOTNODE 30 -#endif - -/** - * MEMP_NUM_SNMP_VARBIND: the number of concurrent requests (does not have to - * be changed normally) - 2 of these are used per request (1 for input, - * 1 for output) - */ -#ifndef MEMP_NUM_SNMP_VARBIND -#define MEMP_NUM_SNMP_VARBIND 2 -#endif - -/** - * MEMP_NUM_SNMP_VALUE: the number of OID or values concurrently used - * (does not have to be changed normally) - 3 of these are used per request - * (1 for the value read and 2 for OIDs - input and output) - */ -#ifndef MEMP_NUM_SNMP_VALUE -#define MEMP_NUM_SNMP_VALUE 3 -#endif - -/** - * MEMP_NUM_NETDB: the number of concurrently running lwip_addrinfo() calls - * (before freeing the corresponding memory using lwip_freeaddrinfo()). - */ -#ifndef MEMP_NUM_NETDB -#define MEMP_NUM_NETDB 1 -#endif - -/** - * MEMP_NUM_LOCALHOSTLIST: the number of host entries in the local host list - * if DNS_LOCAL_HOSTLIST_IS_DYNAMIC==1. - */ -#ifndef MEMP_NUM_LOCALHOSTLIST -#define MEMP_NUM_LOCALHOSTLIST 1 -#endif - -/** - * MEMP_NUM_PPPOE_INTERFACES: the number of concurrently active PPPoE - * interfaces (only used with PPPOE_SUPPORT==1) - */ -#ifndef MEMP_NUM_PPPOE_INTERFACES -#define MEMP_NUM_PPPOE_INTERFACES 1 -#endif - -/** - * PBUF_POOL_SIZE: the number of buffers in the pbuf pool. - */ -#ifndef PBUF_POOL_SIZE -#define PBUF_POOL_SIZE 16 -#endif - -/* - --------------------------------- - ---------- ARP options ---------- - --------------------------------- -*/ -/** - * LWIP_ARP==1: Enable ARP functionality. - */ -#ifndef LWIP_ARP -#define LWIP_ARP 1 -#endif - -/** - * ARP_TABLE_SIZE: Number of active MAC-IP address pairs cached. - */ -#ifndef ARP_TABLE_SIZE -#define ARP_TABLE_SIZE 10 -#endif - -/** - * ARP_QUEUEING==1: Multiple outgoing packets are queued during hardware address - * resolution. By default, only the most recent packet is queued per IP address. - * This is sufficient for most protocols and mainly reduces TCP connection - * startup time. Set this to 1 if you know your application sends more than one - * packet in a row to an IP address that is not in the ARP cache. - */ -#ifndef ARP_QUEUEING -#define ARP_QUEUEING 0 -#endif - -/** - * ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be - * updated with the source MAC and IP addresses supplied in the packet. - * You may want to disable this if you do not trust LAN peers to have the - * correct addresses, or as a limited approach to attempt to handle - * spoofing. If disabled, lwIP will need to make a new ARP request if - * the peer is not already in the ARP table, adding a little latency. - * The peer *is* in the ARP table if it requested our address before. - * Also notice that this slows down input processing of every IP packet! - */ -#ifndef ETHARP_TRUST_IP_MAC -#define ETHARP_TRUST_IP_MAC 0 -#endif - -/** - * ETHARP_SUPPORT_VLAN==1: support receiving ethernet packets with VLAN header. - * Additionally, you can define ETHARP_VLAN_CHECK to an u16_t VLAN ID to check. - * If ETHARP_VLAN_CHECK is defined, only VLAN-traffic for this VLAN is accepted. - * If ETHARP_VLAN_CHECK is not defined, all traffic is accepted. - * Alternatively, define a function/define ETHARP_VLAN_CHECK_FN(eth_hdr, vlan) - * that returns 1 to accept a packet or 0 to drop a packet. - */ -#ifndef ETHARP_SUPPORT_VLAN -#define ETHARP_SUPPORT_VLAN 0 -#endif - -/** LWIP_ETHERNET==1: enable ethernet support for PPPoE even though ARP - * might be disabled - */ -#ifndef LWIP_ETHERNET -#define LWIP_ETHERNET (LWIP_ARP || PPPOE_SUPPORT) -#endif - -/** ETH_PAD_SIZE: number of bytes added before the ethernet header to ensure - * alignment of payload after that header. Since the header is 14 bytes long, - * without this padding e.g. addresses in the IP header will not be aligned - * on a 32-bit boundary, so setting this to 2 can speed up 32-bit-platforms. - */ -#ifndef ETH_PAD_SIZE -#define ETH_PAD_SIZE 0 -#endif - -/** ETHARP_SUPPORT_STATIC_ENTRIES==1: enable code to support static ARP table - * entries (using etharp_add_static_entry/etharp_remove_static_entry). - */ -#ifndef ETHARP_SUPPORT_STATIC_ENTRIES -#define ETHARP_SUPPORT_STATIC_ENTRIES 0 -#endif - - -/* - -------------------------------- - ---------- IP options ---------- - -------------------------------- -*/ -/** - * IP_FORWARD==1: Enables the ability to forward IP packets across network - * interfaces. If you are going to run lwIP on a device with only one network - * interface, define this to 0. - */ -#ifndef IP_FORWARD -#define IP_FORWARD 0 -#endif - -/** - * IP_OPTIONS_ALLOWED: Defines the behavior for IP options. - * IP_OPTIONS_ALLOWED==0: All packets with IP options are dropped. - * IP_OPTIONS_ALLOWED==1: IP options are allowed (but not parsed). - */ -#ifndef IP_OPTIONS_ALLOWED -#define IP_OPTIONS_ALLOWED 1 -#endif - -/** - * IP_REASSEMBLY==1: Reassemble incoming fragmented IP packets. Note that - * this option does not affect outgoing packet sizes, which can be controlled - * via IP_FRAG. - */ -#ifndef IP_REASSEMBLY -#define IP_REASSEMBLY 1 -#endif - -/** - * IP_FRAG==1: Fragment outgoing IP packets if their size exceeds MTU. Note - * that this option does not affect incoming packet sizes, which can be - * controlled via IP_REASSEMBLY. - */ -#ifndef IP_FRAG -#define IP_FRAG 1 -#endif - -/** - * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally) - * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived - * in this time, the whole packet is discarded. - */ -#ifndef IP_REASS_MAXAGE -#define IP_REASS_MAXAGE 3 -#endif - -/** - * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled. - * Since the received pbufs are enqueued, be sure to configure - * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive - * packets even if the maximum amount of fragments is enqueued for reassembly! - */ -#ifndef IP_REASS_MAX_PBUFS -#define IP_REASS_MAX_PBUFS 10 -#endif - -/** - * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP - * fragmentation. Otherwise pbufs are allocated and reference the original - * packet data to be fragmented (or with LWIP_NETIF_TX_SINGLE_PBUF==1, - * new PBUF_RAM pbufs are used for fragments). - * ATTENTION: IP_FRAG_USES_STATIC_BUF==1 may not be used for DMA-enabled MACs! - */ -#ifndef IP_FRAG_USES_STATIC_BUF -#define IP_FRAG_USES_STATIC_BUF 0 -#endif - -/** - * IP_FRAG_MAX_MTU: Assumed max MTU on any interface for IP frag buffer - * (requires IP_FRAG_USES_STATIC_BUF==1) - */ -#if IP_FRAG_USES_STATIC_BUF && !defined(IP_FRAG_MAX_MTU) -#define IP_FRAG_MAX_MTU 1500 -#endif - -/** - * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers. - */ -#ifndef IP_DEFAULT_TTL -#define IP_DEFAULT_TTL 255 -#endif - -/** - * IP_SOF_BROADCAST=1: Use the SOF_BROADCAST field to enable broadcast - * filter per pcb on udp and raw send operations. To enable broadcast filter - * on recv operations, you also have to set IP_SOF_BROADCAST_RECV=1. - */ -#ifndef IP_SOF_BROADCAST -#define IP_SOF_BROADCAST 0 -#endif - -/** - * IP_SOF_BROADCAST_RECV (requires IP_SOF_BROADCAST=1) enable the broadcast - * filter on recv operations. - */ -#ifndef IP_SOF_BROADCAST_RECV -#define IP_SOF_BROADCAST_RECV 0 -#endif - -/** - * IP_FORWARD_ALLOW_TX_ON_RX_NETIF==1: allow ip_forward() to send packets back - * out on the netif where it was received. This should only be used for - * wireless networks. - * ATTENTION: When this is 1, make sure your netif driver correctly marks incoming - * link-layer-broadcast/multicast packets as such using the corresponding pbuf flags! - */ -#ifndef IP_FORWARD_ALLOW_TX_ON_RX_NETIF -#define IP_FORWARD_ALLOW_TX_ON_RX_NETIF 0 -#endif - -/** - * LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS==1: randomize the local port for the first - * local TCP/UDP pcb (default==0). This can prevent creating predictable port - * numbers after booting a device. - */ -#ifndef LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS -#define LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS 0 -#endif - -/* - ---------------------------------- - ---------- ICMP options ---------- - ---------------------------------- -*/ -/** - * LWIP_ICMP==1: Enable ICMP module inside the IP stack. - * Be careful, disable that make your product non-compliant to RFC1122 - */ -#ifndef LWIP_ICMP -#define LWIP_ICMP 1 -#endif - -/** - * ICMP_TTL: Default value for Time-To-Live used by ICMP packets. - */ -#ifndef ICMP_TTL -#define ICMP_TTL (IP_DEFAULT_TTL) -#endif - -/** - * LWIP_BROADCAST_PING==1: respond to broadcast pings (default is unicast only) - */ -#ifndef LWIP_BROADCAST_PING -#define LWIP_BROADCAST_PING 0 -#endif - -/** - * LWIP_MULTICAST_PING==1: respond to multicast pings (default is unicast only) - */ -#ifndef LWIP_MULTICAST_PING -#define LWIP_MULTICAST_PING 0 -#endif - -/* - --------------------------------- - ---------- RAW options ---------- - --------------------------------- -*/ -/** - * LWIP_RAW==1: Enable application layer to hook into the IP layer itself. - */ -#ifndef LWIP_RAW -#define LWIP_RAW 1 -#endif - -/** - * LWIP_RAW==1: Enable application layer to hook into the IP layer itself. - */ -#ifndef RAW_TTL -#define RAW_TTL (IP_DEFAULT_TTL) -#endif - -/* - ---------------------------------- - ---------- DHCP options ---------- - ---------------------------------- -*/ -/** - * LWIP_DHCP==1: Enable DHCP module. - */ -#ifndef LWIP_DHCP -#define LWIP_DHCP 0 -#endif - -/** - * DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address. - */ -#ifndef DHCP_DOES_ARP_CHECK -#define DHCP_DOES_ARP_CHECK ((LWIP_DHCP) && (LWIP_ARP)) -#endif - -/* - ------------------------------------ - ---------- AUTOIP options ---------- - ------------------------------------ -*/ -/** - * LWIP_AUTOIP==1: Enable AUTOIP module. - */ -#ifndef LWIP_AUTOIP -#define LWIP_AUTOIP 0 -#endif - -/** - * LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on - * the same interface at the same time. - */ -#ifndef LWIP_DHCP_AUTOIP_COOP -#define LWIP_DHCP_AUTOIP_COOP 0 -#endif - -/** - * LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes - * that should be sent before falling back on AUTOIP. This can be set - * as low as 1 to get an AutoIP address very quickly, but you should - * be prepared to handle a changing IP address when DHCP overrides - * AutoIP. - */ -#ifndef LWIP_DHCP_AUTOIP_COOP_TRIES -#define LWIP_DHCP_AUTOIP_COOP_TRIES 9 -#endif - -/* - ---------------------------------- - ---------- SNMP options ---------- - ---------------------------------- -*/ -/** - * LWIP_SNMP==1: Turn on SNMP module. UDP must be available for SNMP - * transport. - */ -#ifndef LWIP_SNMP -#define LWIP_SNMP 0 -#endif - -/** - * SNMP_CONCURRENT_REQUESTS: Number of concurrent requests the module will - * allow. At least one request buffer is required. - * Does not have to be changed unless external MIBs answer request asynchronously - */ -#ifndef SNMP_CONCURRENT_REQUESTS -#define SNMP_CONCURRENT_REQUESTS 1 -#endif - -/** - * SNMP_TRAP_DESTINATIONS: Number of trap destinations. At least one trap - * destination is required - */ -#ifndef SNMP_TRAP_DESTINATIONS -#define SNMP_TRAP_DESTINATIONS 1 -#endif - -/** - * SNMP_PRIVATE_MIB: - * When using a private MIB, you have to create a file 'private_mib.h' that contains - * a 'struct mib_array_node mib_private' which contains your MIB. - */ -#ifndef SNMP_PRIVATE_MIB -#define SNMP_PRIVATE_MIB 0 -#endif - -/** - * Only allow SNMP write actions that are 'safe' (e.g. disabeling netifs is not - * a safe action and disabled when SNMP_SAFE_REQUESTS = 1). - * Unsafe requests are disabled by default! - */ -#ifndef SNMP_SAFE_REQUESTS -#define SNMP_SAFE_REQUESTS 1 -#endif - -/** - * The maximum length of strings used. This affects the size of - * MEMP_SNMP_VALUE elements. - */ -#ifndef SNMP_MAX_OCTET_STRING_LEN -#define SNMP_MAX_OCTET_STRING_LEN 127 -#endif - -/** - * The maximum depth of the SNMP tree. - * With private MIBs enabled, this depends on your MIB! - * This affects the size of MEMP_SNMP_VALUE elements. - */ -#ifndef SNMP_MAX_TREE_DEPTH -#define SNMP_MAX_TREE_DEPTH 15 -#endif - -/** - * The size of the MEMP_SNMP_VALUE elements, normally calculated from - * SNMP_MAX_OCTET_STRING_LEN and SNMP_MAX_TREE_DEPTH. - */ -#ifndef SNMP_MAX_VALUE_SIZE -#define SNMP_MAX_VALUE_SIZE LWIP_MAX((SNMP_MAX_OCTET_STRING_LEN)+1, sizeof(s32_t)*(SNMP_MAX_TREE_DEPTH)) -#endif - -/* - ---------------------------------- - ---------- IGMP options ---------- - ---------------------------------- -*/ -/** - * LWIP_IGMP==1: Turn on IGMP module. - */ -#ifndef LWIP_IGMP -#define LWIP_IGMP 0 -#endif - -/* - ---------------------------------- - ---------- DNS options ----------- - ---------------------------------- -*/ -/** - * LWIP_DNS==1: Turn on DNS module. UDP must be available for DNS - * transport. - */ -#ifndef LWIP_DNS -#define LWIP_DNS 0 -#endif - -/** DNS maximum number of entries to maintain locally. */ -#ifndef DNS_TABLE_SIZE -#define DNS_TABLE_SIZE 4 -#endif - -/** DNS maximum host name length supported in the name table. */ -#ifndef DNS_MAX_NAME_LENGTH -#define DNS_MAX_NAME_LENGTH 256 -#endif - -/** The maximum of DNS servers */ -#ifndef DNS_MAX_SERVERS -#define DNS_MAX_SERVERS 2 -#endif - -/** DNS do a name checking between the query and the response. */ -#ifndef DNS_DOES_NAME_CHECK -#define DNS_DOES_NAME_CHECK 1 -#endif - -/** DNS message max. size. Default value is RFC compliant. */ -#ifndef DNS_MSG_SIZE -#define DNS_MSG_SIZE 512 -#endif - -/** DNS_LOCAL_HOSTLIST: Implements a local host-to-address list. If enabled, - * you have to define - * #define DNS_LOCAL_HOSTLIST_INIT {{"host1", 0x123}, {"host2", 0x234}} - * (an array of structs name/address, where address is an u32_t in network - * byte order). - * - * Instead, you can also use an external function: - * #define DNS_LOOKUP_LOCAL_EXTERN(x) extern u32_t my_lookup_function(const char *name) - * that returns the IP address or INADDR_NONE if not found. - */ -#ifndef DNS_LOCAL_HOSTLIST -#define DNS_LOCAL_HOSTLIST 0 -#endif /* DNS_LOCAL_HOSTLIST */ - -/** If this is turned on, the local host-list can be dynamically changed - * at runtime. */ -#ifndef DNS_LOCAL_HOSTLIST_IS_DYNAMIC -#define DNS_LOCAL_HOSTLIST_IS_DYNAMIC 0 -#endif /* DNS_LOCAL_HOSTLIST_IS_DYNAMIC */ - -/* - --------------------------------- - ---------- UDP options ---------- - --------------------------------- -*/ -/** - * LWIP_UDP==1: Turn on UDP. - */ -#ifndef LWIP_UDP -#define LWIP_UDP 1 -#endif - -/** - * LWIP_UDPLITE==1: Turn on UDP-Lite. (Requires LWIP_UDP) - */ -#ifndef LWIP_UDPLITE -#define LWIP_UDPLITE 0 -#endif - -/** - * UDP_TTL: Default Time-To-Live value. - */ -#ifndef UDP_TTL -#define UDP_TTL (IP_DEFAULT_TTL) -#endif - -/** - * LWIP_NETBUF_RECVINFO==1: append destination addr and port to every netbuf. - */ -#ifndef LWIP_NETBUF_RECVINFO -#define LWIP_NETBUF_RECVINFO 0 -#endif - -/* - --------------------------------- - ---------- TCP options ---------- - --------------------------------- -*/ -/** - * LWIP_TCP==1: Turn on TCP. - */ -#ifndef LWIP_TCP -#define LWIP_TCP 1 -#endif - -/** - * TCP_TTL: Default Time-To-Live value. - */ -#ifndef TCP_TTL -#define TCP_TTL (IP_DEFAULT_TTL) -#endif - -/** - * TCP_WND: The size of a TCP window. This must be at least - * (2 * TCP_MSS) for things to work well - */ -#ifndef TCP_WND -#define TCP_WND (4 * TCP_MSS) -#endif - -/** - * TCP_MAXRTX: Maximum number of retransmissions of data segments. - */ -#ifndef TCP_MAXRTX -#define TCP_MAXRTX 12 -#endif - -/** - * TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments. - */ -#ifndef TCP_SYNMAXRTX -#define TCP_SYNMAXRTX 6 -#endif - -/** - * TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order. - * Define to 0 if your device is low on memory. - */ -#ifndef TCP_QUEUE_OOSEQ -#define TCP_QUEUE_OOSEQ (LWIP_TCP) -#endif - -/** - * TCP_MSS: TCP Maximum segment size. (default is 536, a conservative default, - * you might want to increase this.) - * For the receive side, this MSS is advertised to the remote side - * when opening a connection. For the transmit size, this MSS sets - * an upper limit on the MSS advertised by the remote host. - */ -#ifndef TCP_MSS -#define TCP_MSS 536 -#endif - -/** - * TCP_CALCULATE_EFF_SEND_MSS: "The maximum size of a segment that TCP really - * sends, the 'effective send MSS,' MUST be the smaller of the send MSS (which - * reflects the available reassembly buffer size at the remote host) and the - * largest size permitted by the IP layer" (RFC 1122) - * Setting this to 1 enables code that checks TCP_MSS against the MTU of the - * netif used for a connection and limits the MSS if it would be too big otherwise. - */ -#ifndef TCP_CALCULATE_EFF_SEND_MSS -#define TCP_CALCULATE_EFF_SEND_MSS 1 -#endif - - -/** - * TCP_SND_BUF: TCP sender buffer space (bytes). - * To achieve good performance, this should be at least 2 * TCP_MSS. - */ -#ifndef TCP_SND_BUF -#define TCP_SND_BUF (2 * TCP_MSS) -#endif - -/** - * TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least - * as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work. - */ -#ifndef TCP_SND_QUEUELEN -#define TCP_SND_QUEUELEN ((4 * (TCP_SND_BUF) + (TCP_MSS - 1))/(TCP_MSS)) -#endif - -/** - * TCP_SNDLOWAT: TCP writable space (bytes). This must be less than - * TCP_SND_BUF. It is the amount of space which must be available in the - * TCP snd_buf for select to return writable (combined with TCP_SNDQUEUELOWAT). - */ -#ifndef TCP_SNDLOWAT -#define TCP_SNDLOWAT LWIP_MIN(LWIP_MAX(((TCP_SND_BUF)/2), (2 * TCP_MSS) + 1), (TCP_SND_BUF) - 1) -#endif - -/** - * TCP_SNDQUEUELOWAT: TCP writable bufs (pbuf count). This must be less - * than TCP_SND_QUEUELEN. If the number of pbufs queued on a pcb drops below - * this number, select returns writable (combined with TCP_SNDLOWAT). - */ -#ifndef TCP_SNDQUEUELOWAT -#define TCP_SNDQUEUELOWAT LWIP_MAX(((TCP_SND_QUEUELEN)/2), 5) -#endif - -/** - * TCP_OOSEQ_MAX_BYTES: The maximum number of bytes queued on ooseq per pcb. - * Default is 0 (no limit). Only valid for TCP_QUEUE_OOSEQ==0. - */ -#ifndef TCP_OOSEQ_MAX_BYTES -#define TCP_OOSEQ_MAX_BYTES 0 -#endif - -/** - * TCP_OOSEQ_MAX_PBUFS: The maximum number of pbufs queued on ooseq per pcb. - * Default is 0 (no limit). Only valid for TCP_QUEUE_OOSEQ==0. - */ -#ifndef TCP_OOSEQ_MAX_PBUFS -#define TCP_OOSEQ_MAX_PBUFS 0 -#endif - -/** - * TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb. - */ -#ifndef TCP_LISTEN_BACKLOG -#define TCP_LISTEN_BACKLOG 0 -#endif - -/** - * The maximum allowed backlog for TCP listen netconns. - * This backlog is used unless another is explicitly specified. - * 0xff is the maximum (u8_t). - */ -#ifndef TCP_DEFAULT_LISTEN_BACKLOG -#define TCP_DEFAULT_LISTEN_BACKLOG 0xff -#endif - -/** - * TCP_OVERSIZE: The maximum number of bytes that tcp_write may - * allocate ahead of time in an attempt to create shorter pbuf chains - * for transmission. The meaningful range is 0 to TCP_MSS. Some - * suggested values are: - * - * 0: Disable oversized allocation. Each tcp_write() allocates a new - pbuf (old behaviour). - * 1: Allocate size-aligned pbufs with minimal excess. Use this if your - * scatter-gather DMA requires aligned fragments. - * 128: Limit the pbuf/memory overhead to 20%. - * TCP_MSS: Try to create unfragmented TCP packets. - * TCP_MSS/4: Try to create 4 fragments or less per TCP packet. - */ -#ifndef TCP_OVERSIZE -#define TCP_OVERSIZE TCP_MSS -#endif - -/** - * LWIP_TCP_TIMESTAMPS==1: support the TCP timestamp option. - */ -#ifndef LWIP_TCP_TIMESTAMPS -#define LWIP_TCP_TIMESTAMPS 0 -#endif - -/** - * TCP_WND_UPDATE_THRESHOLD: difference in window to trigger an - * explicit window update - */ -#ifndef TCP_WND_UPDATE_THRESHOLD -#define TCP_WND_UPDATE_THRESHOLD (TCP_WND / 4) -#endif - -/** - * LWIP_EVENT_API and LWIP_CALLBACK_API: Only one of these should be set to 1. - * LWIP_EVENT_API==1: The user defines lwip_tcp_event() to receive all - * events (accept, sent, etc) that happen in the system. - * LWIP_CALLBACK_API==1: The PCB callback function is called directly - * for the event. This is the default. - */ -#if !defined(LWIP_EVENT_API) && !defined(LWIP_CALLBACK_API) -#define LWIP_EVENT_API 0 -#define LWIP_CALLBACK_API 1 -#endif - - -/* - ---------------------------------- - ---------- Pbuf options ---------- - ---------------------------------- -*/ -/** - * PBUF_LINK_HLEN: the number of bytes that should be allocated for a - * link level header. The default is 14, the standard value for - * Ethernet. - */ -#ifndef PBUF_LINK_HLEN -#define PBUF_LINK_HLEN (14 + ETH_PAD_SIZE) -#endif - -/** - * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is - * designed to accomodate single full size TCP frame in one pbuf, including - * TCP_MSS, IP header, and link header. - */ -#ifndef PBUF_POOL_BUFSIZE -#define PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_HLEN) -#endif - -/* - ------------------------------------------------ - ---------- Network Interfaces options ---------- - ------------------------------------------------ -*/ -/** - * LWIP_NETIF_HOSTNAME==1: use DHCP_OPTION_HOSTNAME with netif's hostname - * field. - */ -#ifndef LWIP_NETIF_HOSTNAME -#define LWIP_NETIF_HOSTNAME 0 -#endif - -/** - * LWIP_NETIF_API==1: Support netif api (in netifapi.c) - */ -#ifndef LWIP_NETIF_API -#define LWIP_NETIF_API 0 -#endif - -/** - * LWIP_NETIF_STATUS_CALLBACK==1: Support a callback function whenever an interface - * changes its up/down status (i.e., due to DHCP IP acquistion) - */ -#ifndef LWIP_NETIF_STATUS_CALLBACK -#define LWIP_NETIF_STATUS_CALLBACK 0 -#endif - -/** - * LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface - * whenever the link changes (i.e., link down) - */ -#ifndef LWIP_NETIF_LINK_CALLBACK -#define LWIP_NETIF_LINK_CALLBACK 0 -#endif - -/** - * LWIP_NETIF_REMOVE_CALLBACK==1: Support a callback function that is called - * when a netif has been removed - */ -#ifndef LWIP_NETIF_REMOVE_CALLBACK -#define LWIP_NETIF_REMOVE_CALLBACK 0 -#endif - -/** - * LWIP_NETIF_HWADDRHINT==1: Cache link-layer-address hints (e.g. table - * indices) in struct netif. TCP and UDP can make use of this to prevent - * scanning the ARP table for every sent packet. While this is faster for big - * ARP tables or many concurrent connections, it might be counterproductive - * if you have a tiny ARP table or if there never are concurrent connections. - */ -#ifndef LWIP_NETIF_HWADDRHINT -#define LWIP_NETIF_HWADDRHINT 0 -#endif - -/** - * LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP - * address equal to the netif IP address, looping them back up the stack. - */ -#ifndef LWIP_NETIF_LOOPBACK -#define LWIP_NETIF_LOOPBACK 0 -#endif - -/** - * LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback - * sending for each netif (0 = disabled) - */ -#ifndef LWIP_LOOPBACK_MAX_PBUFS -#define LWIP_LOOPBACK_MAX_PBUFS 0 -#endif - -/** - * LWIP_NETIF_LOOPBACK_MULTITHREADING: Indicates whether threading is enabled in - * the system, as netifs must change how they behave depending on this setting - * for the LWIP_NETIF_LOOPBACK option to work. - * Setting this is needed to avoid reentering non-reentrant functions like - * tcp_input(). - * LWIP_NETIF_LOOPBACK_MULTITHREADING==1: Indicates that the user is using a - * multithreaded environment like tcpip.c. In this case, netif->input() - * is called directly. - * LWIP_NETIF_LOOPBACK_MULTITHREADING==0: Indicates a polling (or NO_SYS) setup. - * The packets are put on a list and netif_poll() must be called in - * the main application loop. - */ -#ifndef LWIP_NETIF_LOOPBACK_MULTITHREADING -#define LWIP_NETIF_LOOPBACK_MULTITHREADING (!NO_SYS) -#endif - -/** - * LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data - * to be sent into one single pbuf. This is for compatibility with DMA-enabled - * MACs that do not support scatter-gather. - * Beware that this might involve CPU-memcpy before transmitting that would not - * be needed without this flag! Use this only if you need to! - * - * @todo: TCP and IP-frag do not work with this, yet: - */ -#ifndef LWIP_NETIF_TX_SINGLE_PBUF -#define LWIP_NETIF_TX_SINGLE_PBUF 0 -#endif /* LWIP_NETIF_TX_SINGLE_PBUF */ - -/* - ------------------------------------ - ---------- LOOPIF options ---------- - ------------------------------------ -*/ -/** - * LWIP_HAVE_LOOPIF==1: Support loop interface (127.0.0.1) and loopif.c - */ -#ifndef LWIP_HAVE_LOOPIF -#define LWIP_HAVE_LOOPIF 0 -#endif - -/* - ------------------------------------ - ---------- SLIPIF options ---------- - ------------------------------------ -*/ -/** - * LWIP_HAVE_SLIPIF==1: Support slip interface and slipif.c - */ -#ifndef LWIP_HAVE_SLIPIF -#define LWIP_HAVE_SLIPIF 0 -#endif - -/* - ------------------------------------ - ---------- Thread options ---------- - ------------------------------------ -*/ -/** - * TCPIP_THREAD_NAME: The name assigned to the main tcpip thread. - */ -#ifndef TCPIP_THREAD_NAME -#define TCPIP_THREAD_NAME "tcpip_thread" -#endif - -/** - * TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread. - * The stack size value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef TCPIP_THREAD_STACKSIZE -#define TCPIP_THREAD_STACKSIZE 1024 -#endif - -/** - * TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread. - * The priority value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef TCPIP_THREAD_PRIO -#define TCPIP_THREAD_PRIO (LOWPRIO + 1) -#endif - -/** - * TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages - * The queue size value itself is platform-dependent, but is passed to - * sys_mbox_new() when tcpip_init is called. - */ -#ifndef TCPIP_MBOX_SIZE -#define TCPIP_MBOX_SIZE MEMP_NUM_PBUF -#endif - -/** - * SLIPIF_THREAD_NAME: The name assigned to the slipif_loop thread. - */ -#ifndef SLIPIF_THREAD_NAME -#define SLIPIF_THREAD_NAME "slipif_loop" -#endif - -/** - * SLIP_THREAD_STACKSIZE: The stack size used by the slipif_loop thread. - * The stack size value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef SLIPIF_THREAD_STACKSIZE -#define SLIPIF_THREAD_STACKSIZE 1024 -#endif - -/** - * SLIPIF_THREAD_PRIO: The priority assigned to the slipif_loop thread. - * The priority value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef SLIPIF_THREAD_PRIO -#define SLIPIF_THREAD_PRIO (LOWPRIO + 1) -#endif - -/** - * PPP_THREAD_NAME: The name assigned to the pppInputThread. - */ -#ifndef PPP_THREAD_NAME -#define PPP_THREAD_NAME "pppInputThread" -#endif - -/** - * PPP_THREAD_STACKSIZE: The stack size used by the pppInputThread. - * The stack size value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef PPP_THREAD_STACKSIZE -#define PPP_THREAD_STACKSIZE 1024 -#endif - -/** - * PPP_THREAD_PRIO: The priority assigned to the pppInputThread. - * The priority value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef PPP_THREAD_PRIO -#define PPP_THREAD_PRIO (LOWPRIO + 1) -#endif - -/** - * DEFAULT_THREAD_NAME: The name assigned to any other lwIP thread. - */ -#ifndef DEFAULT_THREAD_NAME -#define DEFAULT_THREAD_NAME "lwIP" -#endif - -/** - * DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread. - * The stack size value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef DEFAULT_THREAD_STACKSIZE -#define DEFAULT_THREAD_STACKSIZE 1024 -#endif - -/** - * DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread. - * The priority value itself is platform-dependent, but is passed to - * sys_thread_new() when the thread is created. - */ -#ifndef DEFAULT_THREAD_PRIO -#define DEFAULT_THREAD_PRIO (LOWPRIO + 1) -#endif - -/** - * DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a - * NETCONN_RAW. The queue size value itself is platform-dependent, but is passed - * to sys_mbox_new() when the recvmbox is created. - */ -#ifndef DEFAULT_RAW_RECVMBOX_SIZE -#define DEFAULT_RAW_RECVMBOX_SIZE 4 -#endif - -/** - * DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a - * NETCONN_UDP. The queue size value itself is platform-dependent, but is passed - * to sys_mbox_new() when the recvmbox is created. - */ -#ifndef DEFAULT_UDP_RECVMBOX_SIZE -#define DEFAULT_UDP_RECVMBOX_SIZE 4 -#endif - -/** - * DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a - * NETCONN_TCP. The queue size value itself is platform-dependent, but is passed - * to sys_mbox_new() when the recvmbox is created. - */ -#ifndef DEFAULT_TCP_RECVMBOX_SIZE -#define DEFAULT_TCP_RECVMBOX_SIZE 40 -#endif - -/** - * DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections. - * The queue size value itself is platform-dependent, but is passed to - * sys_mbox_new() when the acceptmbox is created. - */ -#ifndef DEFAULT_ACCEPTMBOX_SIZE -#define DEFAULT_ACCEPTMBOX_SIZE 4 -#endif - -/* - ---------------------------------------------- - ---------- Sequential layer options ---------- - ---------------------------------------------- -*/ -/** - * LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!) - * Don't use it if you're not an active lwIP project member - */ -#ifndef LWIP_TCPIP_CORE_LOCKING -#define LWIP_TCPIP_CORE_LOCKING 0 -#endif - -/** - * LWIP_TCPIP_CORE_LOCKING_INPUT: (EXPERIMENTAL!) - * Don't use it if you're not an active lwIP project member - */ -#ifndef LWIP_TCPIP_CORE_LOCKING_INPUT -#define LWIP_TCPIP_CORE_LOCKING_INPUT 0 -#endif - -/** - * LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c) - */ -#ifndef LWIP_NETCONN -#define LWIP_NETCONN 1 -#endif - -/** LWIP_TCPIP_TIMEOUT==1: Enable tcpip_timeout/tcpip_untimeout tod create - * timers running in tcpip_thread from another thread. - */ -#ifndef LWIP_TCPIP_TIMEOUT -#define LWIP_TCPIP_TIMEOUT 1 -#endif - -/* - ------------------------------------ - ---------- Socket options ---------- - ------------------------------------ -*/ -/** - * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c) - */ -#ifndef LWIP_SOCKET -#define LWIP_SOCKET 1 -#endif - -/** - * LWIP_COMPAT_SOCKETS==1: Enable BSD-style sockets functions names. - * (only used if you use sockets.c) - */ -#ifndef LWIP_COMPAT_SOCKETS -#define LWIP_COMPAT_SOCKETS 1 -#endif - -/** - * LWIP_POSIX_SOCKETS_IO_NAMES==1: Enable POSIX-style sockets functions names. - * Disable this option if you use a POSIX operating system that uses the same - * names (read, write & close). (only used if you use sockets.c) - */ -#ifndef LWIP_POSIX_SOCKETS_IO_NAMES -#define LWIP_POSIX_SOCKETS_IO_NAMES 1 -#endif - -/** - * LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT - * options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set - * in seconds. (does not require sockets.c, and will affect tcp.c) - */ -#ifndef LWIP_TCP_KEEPALIVE -#define LWIP_TCP_KEEPALIVE 0 -#endif - -/** - * LWIP_SO_SNDTIMEO==1: Enable send timeout for sockets/netconns and - * SO_SNDTIMEO processing. - */ -#ifndef LWIP_SO_SNDTIMEO -#define LWIP_SO_SNDTIMEO 0 -#endif - -/** - * LWIP_SO_RCVTIMEO==1: Enable receive timeout for sockets/netconns and - * SO_RCVTIMEO processing. - */ -#ifndef LWIP_SO_RCVTIMEO -#define LWIP_SO_RCVTIMEO 0 -#endif - -/** - * LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing. - */ -#ifndef LWIP_SO_RCVBUF -#define LWIP_SO_RCVBUF 0 -#endif - -/** - * If LWIP_SO_RCVBUF is used, this is the default value for recv_bufsize. - */ -#ifndef RECV_BUFSIZE_DEFAULT -#define RECV_BUFSIZE_DEFAULT INT_MAX -#endif - -/** - * SO_REUSE==1: Enable SO_REUSEADDR option. - */ -#ifndef SO_REUSE -#define SO_REUSE 0 -#endif - -/** - * SO_REUSE_RXTOALL==1: Pass a copy of incoming broadcast/multicast packets - * to all local matches if SO_REUSEADDR is turned on. - * WARNING: Adds a memcpy for every packet if passing to more than one pcb! - */ -#ifndef SO_REUSE_RXTOALL -#define SO_REUSE_RXTOALL 0 -#endif - -/* - ---------------------------------------- - ---------- Statistics options ---------- - ---------------------------------------- -*/ -/** - * LWIP_STATS==1: Enable statistics collection in lwip_stats. - */ -#ifndef LWIP_STATS -#define LWIP_STATS 1 -#endif - -#if LWIP_STATS - -/** - * LWIP_STATS_DISPLAY==1: Compile in the statistics output functions. - */ -#ifndef LWIP_STATS_DISPLAY -#define LWIP_STATS_DISPLAY 0 -#endif - -/** - * LINK_STATS==1: Enable link stats. - */ -#ifndef LINK_STATS -#define LINK_STATS 1 -#endif - -/** - * ETHARP_STATS==1: Enable etharp stats. - */ -#ifndef ETHARP_STATS -#define ETHARP_STATS (LWIP_ARP) -#endif - -/** - * IP_STATS==1: Enable IP stats. - */ -#ifndef IP_STATS -#define IP_STATS 1 -#endif - -/** - * IPFRAG_STATS==1: Enable IP fragmentation stats. Default is - * on if using either frag or reass. - */ -#ifndef IPFRAG_STATS -#define IPFRAG_STATS (IP_REASSEMBLY || IP_FRAG) -#endif - -/** - * ICMP_STATS==1: Enable ICMP stats. - */ -#ifndef ICMP_STATS -#define ICMP_STATS 1 -#endif - -/** - * IGMP_STATS==1: Enable IGMP stats. - */ -#ifndef IGMP_STATS -#define IGMP_STATS (LWIP_IGMP) -#endif - -/** - * UDP_STATS==1: Enable UDP stats. Default is on if - * UDP enabled, otherwise off. - */ -#ifndef UDP_STATS -#define UDP_STATS (LWIP_UDP) -#endif - -/** - * TCP_STATS==1: Enable TCP stats. Default is on if TCP - * enabled, otherwise off. - */ -#ifndef TCP_STATS -#define TCP_STATS (LWIP_TCP) -#endif - -/** - * MEM_STATS==1: Enable mem.c stats. - */ -#ifndef MEM_STATS -#define MEM_STATS ((MEM_LIBC_MALLOC == 0) && (MEM_USE_POOLS == 0)) -#endif - -/** - * MEMP_STATS==1: Enable memp.c pool stats. - */ -#ifndef MEMP_STATS -#define MEMP_STATS (MEMP_MEM_MALLOC == 0) -#endif - -/** - * SYS_STATS==1: Enable system stats (sem and mbox counts, etc). - */ -#ifndef SYS_STATS -#define SYS_STATS (NO_SYS == 0) -#endif - -#else - -#define LINK_STATS 0 -#define IP_STATS 0 -#define IPFRAG_STATS 0 -#define ICMP_STATS 0 -#define IGMP_STATS 0 -#define UDP_STATS 0 -#define TCP_STATS 0 -#define MEM_STATS 0 -#define MEMP_STATS 0 -#define SYS_STATS 0 -#define LWIP_STATS_DISPLAY 0 - -#endif /* LWIP_STATS */ - -/* - --------------------------------- - ---------- PPP options ---------- - --------------------------------- -*/ -/** - * PPP_SUPPORT==1: Enable PPP. - */ -#ifndef PPP_SUPPORT -#define PPP_SUPPORT 0 -#endif - -/** - * PPPOE_SUPPORT==1: Enable PPP Over Ethernet - */ -#ifndef PPPOE_SUPPORT -#define PPPOE_SUPPORT 0 -#endif - -/** - * PPPOS_SUPPORT==1: Enable PPP Over Serial - */ -#ifndef PPPOS_SUPPORT -#define PPPOS_SUPPORT PPP_SUPPORT -#endif - -#if PPP_SUPPORT - -/** - * NUM_PPP: Max PPP sessions. - */ -#ifndef NUM_PPP -#define NUM_PPP 1 -#endif - -/** - * PAP_SUPPORT==1: Support PAP. - */ -#ifndef PAP_SUPPORT -#define PAP_SUPPORT 0 -#endif - -/** - * CHAP_SUPPORT==1: Support CHAP. - */ -#ifndef CHAP_SUPPORT -#define CHAP_SUPPORT 0 -#endif - -/** - * MSCHAP_SUPPORT==1: Support MSCHAP. CURRENTLY NOT SUPPORTED! DO NOT SET! - */ -#ifndef MSCHAP_SUPPORT -#define MSCHAP_SUPPORT 0 -#endif - -/** - * CBCP_SUPPORT==1: Support CBCP. CURRENTLY NOT SUPPORTED! DO NOT SET! - */ -#ifndef CBCP_SUPPORT -#define CBCP_SUPPORT 0 -#endif - -/** - * CCP_SUPPORT==1: Support CCP. CURRENTLY NOT SUPPORTED! DO NOT SET! - */ -#ifndef CCP_SUPPORT -#define CCP_SUPPORT 0 -#endif - -/** - * VJ_SUPPORT==1: Support VJ header compression. - */ -#ifndef VJ_SUPPORT -#define VJ_SUPPORT 0 -#endif - -/** - * MD5_SUPPORT==1: Support MD5 (see also CHAP). - */ -#ifndef MD5_SUPPORT -#define MD5_SUPPORT 0 -#endif - -/* - * Timeouts - */ -#ifndef FSM_DEFTIMEOUT -#define FSM_DEFTIMEOUT 6 /* Timeout time in seconds */ -#endif - -#ifndef FSM_DEFMAXTERMREQS -#define FSM_DEFMAXTERMREQS 2 /* Maximum Terminate-Request transmissions */ -#endif - -#ifndef FSM_DEFMAXCONFREQS -#define FSM_DEFMAXCONFREQS 10 /* Maximum Configure-Request transmissions */ -#endif - -#ifndef FSM_DEFMAXNAKLOOPS -#define FSM_DEFMAXNAKLOOPS 5 /* Maximum number of nak loops */ -#endif - -#ifndef UPAP_DEFTIMEOUT -#define UPAP_DEFTIMEOUT 6 /* Timeout (seconds) for retransmitting req */ -#endif - -#ifndef UPAP_DEFREQTIME -#define UPAP_DEFREQTIME 30 /* Time to wait for auth-req from peer */ -#endif - -#ifndef CHAP_DEFTIMEOUT -#define CHAP_DEFTIMEOUT 6 /* Timeout time in seconds */ -#endif - -#ifndef CHAP_DEFTRANSMITS -#define CHAP_DEFTRANSMITS 10 /* max # times to send challenge */ -#endif - -/* Interval in seconds between keepalive echo requests, 0 to disable. */ -#ifndef LCP_ECHOINTERVAL -#define LCP_ECHOINTERVAL 0 -#endif - -/* Number of unanswered echo requests before failure. */ -#ifndef LCP_MAXECHOFAILS -#define LCP_MAXECHOFAILS 3 -#endif - -/* Max Xmit idle time (in jiffies) before resend flag char. */ -#ifndef PPP_MAXIDLEFLAG -#define PPP_MAXIDLEFLAG 100 -#endif - -/* - * Packet sizes - * - * Note - lcp shouldn't be allowed to negotiate stuff outside these - * limits. See lcp.h in the pppd directory. - * (XXX - these constants should simply be shared by lcp.c instead - * of living in lcp.h) - */ -#define PPP_MTU 1500 /* Default MTU (size of Info field) */ -#ifndef PPP_MAXMTU -/* #define PPP_MAXMTU 65535 - (PPP_HDRLEN + PPP_FCSLEN) */ -#define PPP_MAXMTU 1500 /* Largest MTU we allow */ -#endif -#define PPP_MINMTU 64 -#define PPP_MRU 1500 /* default MRU = max length of info field */ -#define PPP_MAXMRU 1500 /* Largest MRU we allow */ -#ifndef PPP_DEFMRU -#define PPP_DEFMRU 296 /* Try for this */ -#endif -#define PPP_MINMRU 128 /* No MRUs below this */ - -#ifndef MAXNAMELEN -#define MAXNAMELEN 256 /* max length of hostname or name for auth */ -#endif -#ifndef MAXSECRETLEN -#define MAXSECRETLEN 256 /* max length of password or secret */ -#endif - -#endif /* PPP_SUPPORT */ - -/* - -------------------------------------- - ---------- Checksum options ---------- - -------------------------------------- -*/ -/** - * CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets. - */ -#ifndef CHECKSUM_GEN_IP -#define CHECKSUM_GEN_IP 1 -#endif - -/** - * CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets. - */ -#ifndef CHECKSUM_GEN_UDP -#define CHECKSUM_GEN_UDP 1 -#endif - -/** - * CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets. - */ -#ifndef CHECKSUM_GEN_TCP -#define CHECKSUM_GEN_TCP 1 -#endif - -/** - * CHECKSUM_GEN_ICMP==1: Generate checksums in software for outgoing ICMP packets. - */ -#ifndef CHECKSUM_GEN_ICMP -#define CHECKSUM_GEN_ICMP 1 -#endif - -/** - * CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets. - */ -#ifndef CHECKSUM_CHECK_IP -#define CHECKSUM_CHECK_IP 1 -#endif - -/** - * CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets. - */ -#ifndef CHECKSUM_CHECK_UDP -#define CHECKSUM_CHECK_UDP 1 -#endif - -/** - * CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets. - */ -#ifndef CHECKSUM_CHECK_TCP -#define CHECKSUM_CHECK_TCP 1 -#endif - -/** - * LWIP_CHECKSUM_ON_COPY==1: Calculate checksum when copying data from - * application buffers to pbufs. - */ -#ifndef LWIP_CHECKSUM_ON_COPY -#define LWIP_CHECKSUM_ON_COPY 0 -#endif - -/* - --------------------------------------- - ---------- Hook options --------------- - --------------------------------------- -*/ - -/* Hooks are undefined by default, define them to a function if you need them. */ - -/** - * LWIP_HOOK_IP4_INPUT(pbuf, input_netif): - * - called from ip_input() (IPv4) - * - pbuf: received struct pbuf passed to ip_input() - * - input_netif: struct netif on which the packet has been received - * Return values: - * - 0: Hook has not consumed the packet, packet is processed as normal - * - != 0: Hook has consumed the packet. - * If the hook consumed the packet, 'pbuf' is in the responsibility of the hook - * (i.e. free it when done). - */ - -/** - * LWIP_HOOK_IP4_ROUTE(dest): - * - called from ip_route() (IPv4) - * - dest: destination IPv4 address - * Returns the destination netif or NULL if no destination netif is found. In - * that case, ip_route() continues as normal. - */ - -/* - --------------------------------------- - ---------- Debugging options ---------- - --------------------------------------- -*/ -/** - * LWIP_DBG_MIN_LEVEL: After masking, the value of the debug is - * compared against this value. If it is smaller, then debugging - * messages are written. - */ -#ifndef LWIP_DBG_MIN_LEVEL -#define LWIP_DBG_MIN_LEVEL LWIP_DBG_LEVEL_ALL -#endif - -/** - * LWIP_DBG_TYPES_ON: A mask that can be used to globally enable/disable - * debug messages of certain types. - */ -#ifndef LWIP_DBG_TYPES_ON -#define LWIP_DBG_TYPES_ON LWIP_DBG_OFF -#endif - -/** - * ETHARP_DEBUG: Enable debugging in etharp.c. - */ -#ifndef ETHARP_DEBUG -#define ETHARP_DEBUG LWIP_DBG_OFF -#endif - -/** - * NETIF_DEBUG: Enable debugging in netif.c. - */ -#ifndef NETIF_DEBUG -#define NETIF_DEBUG LWIP_DBG_OFF -#endif - -/** - * PBUF_DEBUG: Enable debugging in pbuf.c. - */ -#ifndef PBUF_DEBUG -#define PBUF_DEBUG LWIP_DBG_OFF -#endif - -/** - * API_LIB_DEBUG: Enable debugging in api_lib.c. - */ -#ifndef API_LIB_DEBUG -#define API_LIB_DEBUG LWIP_DBG_OFF -#endif - -/** - * API_MSG_DEBUG: Enable debugging in api_msg.c. - */ -#ifndef API_MSG_DEBUG -#define API_MSG_DEBUG LWIP_DBG_OFF -#endif - -/** - * SOCKETS_DEBUG: Enable debugging in sockets.c. - */ -#ifndef SOCKETS_DEBUG -#define SOCKETS_DEBUG LWIP_DBG_OFF -#endif - -/** - * ICMP_DEBUG: Enable debugging in icmp.c. - */ -#ifndef ICMP_DEBUG -#define ICMP_DEBUG LWIP_DBG_OFF -#endif - -/** - * IGMP_DEBUG: Enable debugging in igmp.c. - */ -#ifndef IGMP_DEBUG -#define IGMP_DEBUG LWIP_DBG_OFF -#endif - -/** - * INET_DEBUG: Enable debugging in inet.c. - */ -#ifndef INET_DEBUG -#define INET_DEBUG LWIP_DBG_OFF -#endif - -/** - * IP_DEBUG: Enable debugging for IP. - */ -#ifndef IP_DEBUG -#define IP_DEBUG LWIP_DBG_OFF -#endif - -/** - * IP_REASS_DEBUG: Enable debugging in ip_frag.c for both frag & reass. - */ -#ifndef IP_REASS_DEBUG -#define IP_REASS_DEBUG LWIP_DBG_OFF -#endif - -/** - * RAW_DEBUG: Enable debugging in raw.c. - */ -#ifndef RAW_DEBUG -#define RAW_DEBUG LWIP_DBG_OFF -#endif - -/** - * MEM_DEBUG: Enable debugging in mem.c. - */ -#ifndef MEM_DEBUG -#define MEM_DEBUG LWIP_DBG_OFF -#endif - -/** - * MEMP_DEBUG: Enable debugging in memp.c. - */ -#ifndef MEMP_DEBUG -#define MEMP_DEBUG LWIP_DBG_OFF -#endif - -/** - * SYS_DEBUG: Enable debugging in sys.c. - */ -#ifndef SYS_DEBUG -#define SYS_DEBUG LWIP_DBG_OFF -#endif - -/** - * TIMERS_DEBUG: Enable debugging in timers.c. - */ -#ifndef TIMERS_DEBUG -#define TIMERS_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_DEBUG: Enable debugging for TCP. - */ -#ifndef TCP_DEBUG -#define TCP_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug. - */ -#ifndef TCP_INPUT_DEBUG -#define TCP_INPUT_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_FR_DEBUG: Enable debugging in tcp_in.c for fast retransmit. - */ -#ifndef TCP_FR_DEBUG -#define TCP_FR_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_RTO_DEBUG: Enable debugging in TCP for retransmit - * timeout. - */ -#ifndef TCP_RTO_DEBUG -#define TCP_RTO_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_CWND_DEBUG: Enable debugging for TCP congestion window. - */ -#ifndef TCP_CWND_DEBUG -#define TCP_CWND_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_WND_DEBUG: Enable debugging in tcp_in.c for window updating. - */ -#ifndef TCP_WND_DEBUG -#define TCP_WND_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions. - */ -#ifndef TCP_OUTPUT_DEBUG -#define TCP_OUTPUT_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_RST_DEBUG: Enable debugging for TCP with the RST message. - */ -#ifndef TCP_RST_DEBUG -#define TCP_RST_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCP_QLEN_DEBUG: Enable debugging for TCP queue lengths. - */ -#ifndef TCP_QLEN_DEBUG -#define TCP_QLEN_DEBUG LWIP_DBG_OFF -#endif - -/** - * UDP_DEBUG: Enable debugging in UDP. - */ -#ifndef UDP_DEBUG -#define UDP_DEBUG LWIP_DBG_OFF -#endif - -/** - * TCPIP_DEBUG: Enable debugging in tcpip.c. - */ -#ifndef TCPIP_DEBUG -#define TCPIP_DEBUG LWIP_DBG_OFF -#endif - -/** - * PPP_DEBUG: Enable debugging for PPP. - */ -#ifndef PPP_DEBUG -#define PPP_DEBUG LWIP_DBG_OFF -#endif - -/** - * SLIP_DEBUG: Enable debugging in slipif.c. - */ -#ifndef SLIP_DEBUG -#define SLIP_DEBUG LWIP_DBG_OFF -#endif - -/** - * DHCP_DEBUG: Enable debugging in dhcp.c. - */ -#ifndef DHCP_DEBUG -#define DHCP_DEBUG LWIP_DBG_OFF -#endif - -/** - * AUTOIP_DEBUG: Enable debugging in autoip.c. - */ -#ifndef AUTOIP_DEBUG -#define AUTOIP_DEBUG LWIP_DBG_OFF -#endif - -/** - * SNMP_MSG_DEBUG: Enable debugging for SNMP messages. - */ -#ifndef SNMP_MSG_DEBUG -#define SNMP_MSG_DEBUG LWIP_DBG_OFF -#endif - -/** - * SNMP_MIB_DEBUG: Enable debugging for SNMP MIBs. - */ -#ifndef SNMP_MIB_DEBUG -#define SNMP_MIB_DEBUG LWIP_DBG_OFF -#endif - -/** - * DNS_DEBUG: Enable debugging for DNS. - */ -#ifndef DNS_DEBUG -#define DNS_DEBUG LWIP_DBG_OFF -#endif - -#endif /* __LWIPOPT_H__ */ diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/main.c b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/main.c deleted file mode 100644 index 83523b1..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/main.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "lwipthread.h" -#include "web/web.h" - -/* - * Application entry point. - */ -int main(void) -{ - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - * - lwIP subsystem initialization using the default configuration. - */ - halInit(); - chSysInit(); - lwipInit(NULL); - - /* - * Start the serial driver with the default configuration. - * Used for debug output of LwIP. - */ - sdStart(&SD1, NULL); - - /* - * Creates the HTTP thread (it changes priority internally). - */ - chThdCreateStatic(wa_http_server, sizeof(wa_http_server), NORMALPRIO + 1, - http_server, NULL); - - while (1) { - osalThreadSleepMilliseconds(500); - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/mcuconf.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/mcuconf.h deleted file mode 100644 index 3abab92..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/mcuconf.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * TM4C129x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 7...0 Lowest...Highest. - */ - -#define TM4C129x_MCUCONF - -/* - * HAL driver system settings. - */ -#define TIVA_MOSC_SINGLE_ENDED FALSE -#define TIVA_RSCLKCFG_OSCSRC RSCLKCFG_OSCSRC_MOSC - -/* - * GPT driver system settings. - */ -#define TIVA_GPT_USE_GPT0 FALSE -#define TIVA_GPT_USE_GPT1 FALSE -#define TIVA_GPT_USE_GPT2 FALSE -#define TIVA_GPT_USE_GPT3 FALSE -#define TIVA_GPT_USE_GPT4 FALSE -#define TIVA_GPT_USE_GPT5 FALSE -#define TIVA_GPT_USE_GPT6 FALSE -#define TIVA_GPT_USE_GPT7 FALSE -#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT6A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT7A_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define TIVA_I2C_USE_I2C0 FALSE -#define TIVA_I2C_USE_I2C1 FALSE -#define TIVA_I2C_USE_I2C2 FALSE -#define TIVA_I2C_USE_I2C3 FALSE -#define TIVA_I2C_USE_I2C4 FALSE -#define TIVA_I2C_USE_I2C5 FALSE -#define TIVA_I2C_USE_I2C6 FALSE -#define TIVA_I2C_USE_I2C7 FALSE -#define TIVA_I2C_USE_I2C8 FALSE -#define TIVA_I2C_USE_I2C9 FALSE -#define TIVA_I2C_I2C0_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C1_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C2_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C3_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C4_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C5_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C6_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C7_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C8_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C9_IRQ_PRIORITY 4 - -/* - * PWM driver system settings. - */ -#define TIVA_PWM_USE_PWM0 FALSE -#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4 - -/* - * SERIAL driver system settings. - */ -#define TIVA_SERIAL_USE_UART0 TRUE -#define TIVA_SERIAL_USE_UART1 FALSE -#define TIVA_SERIAL_USE_UART2 FALSE -#define TIVA_SERIAL_USE_UART3 FALSE -#define TIVA_SERIAL_USE_UART4 FALSE -#define TIVA_SERIAL_USE_UART5 FALSE -#define TIVA_SERIAL_USE_UART6 FALSE -#define TIVA_SERIAL_USE_UART7 FALSE -#define TIVA_SERIAL_UART0_PRIORITY 5 -#define TIVA_SERIAL_UART1_PRIORITY 5 -#define TIVA_SERIAL_UART2_PRIORITY 5 -#define TIVA_SERIAL_UART3_PRIORITY 5 -#define TIVA_SERIAL_UART4_PRIORITY 5 -#define TIVA_SERIAL_UART5_PRIORITY 5 -#define TIVA_SERIAL_UART6_PRIORITY 5 -#define TIVA_SERIAL_UART7_PRIORITY 5 - -/* - * ST driver system settings. - */ -#define TIVA_ST_IRQ_PRIORITY 2 -#define TIVA_ST_USE_WIDE_TIMER FALSE -#define TIVA_ST_TIMER_NUMBER 5 -#define TIVA_ST_TIMER_LETTER A diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.c b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.c deleted file mode 100644 index 8d0d281..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * This file is a modified version of the lwIP web server demo. The original - * author is unknown because the file didn't contain any license information. - */ - -/** - * @file web.c - * @brief HTTP server wrapper thread code. - * @addtogroup WEB_THREAD - * @{ - */ - -#include "ch.h" - -#include "lwip/opt.h" -#include "lwip/arch.h" -#include "lwip/api.h" - -#include "web.h" - -#if LWIP_NETCONN - -static const char http_html_hdr[] = "HTTP/1.1 200 OK\r\nContent-type: text/html\r\n\r\n"; -static const char http_index_html[] = "<html><head><title>Congrats!</title></head><body><h1>Welcome to our lwIP HTTP server!</h1><p>This is a small test page.</body></html>"; - -static void http_server_serve(struct netconn *conn) { - struct netbuf *inbuf; - char *buf; - u16_t buflen; - err_t err; - - /* Read the data from the port, blocking if nothing yet there. - We assume the request (the part we care about) is in one netbuf */ - err = netconn_recv(conn, &inbuf); - - if (err == ERR_OK) { - netbuf_data(inbuf, (void **)&buf, &buflen); - - /* Is this an HTTP GET command? (only check the first 5 chars, since - there are other formats for GET, and we're keeping it very simple )*/ - if (buflen>=5 && - buf[0]=='G' && - buf[1]=='E' && - buf[2]=='T' && - buf[3]==' ' && - buf[4]=='/' ) { - - /* Send the HTML header - * subtract 1 from the size, since we dont send the \0 in the string - * NETCONN_NOCOPY: our data is const static, so no need to copy it - */ - netconn_write(conn, http_html_hdr, sizeof(http_html_hdr)-1, NETCONN_NOCOPY); - - /* Send our HTML page */ - netconn_write(conn, http_index_html, sizeof(http_index_html)-1, NETCONN_NOCOPY); - } - } - /* Close the connection (server closes in HTTP) */ - netconn_close(conn); - - /* Delete the buffer (netconn_recv gives us ownership, - so we have to make sure to deallocate the buffer) */ - netbuf_delete(inbuf); -} - -/** - * Stack area for the http thread. - */ -THD_WORKING_AREA(wa_http_server, WEB_THREAD_STACK_SIZE); - -/** - * HTTP server thread. - */ -THD_FUNCTION(http_server, p) { - struct netconn *conn, *newconn; - err_t err; - - (void)p; - - /* Create a new TCP connection handle */ - conn = netconn_new(NETCONN_TCP); - LWIP_ERROR("http_server: invalid conn", (conn != NULL), return;); - - /* Bind to port 80 (HTTP) with default IP address */ - netconn_bind(conn, NULL, WEB_THREAD_PORT); - - /* Put the connection into LISTEN state */ - netconn_listen(conn); - - /* Goes to the final priority after initialization.*/ - chThdSetPriority(WEB_THREAD_PRIORITY); - - while(1) { - err = netconn_accept(conn, &newconn); - if (err != ERR_OK) - continue; - http_server_serve(newconn); - netconn_delete(newconn); - } -} - -#endif /* LWIP_NETCONN */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.h deleted file mode 100644 index 106dc26..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD-LWIP/web/web.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file web.h - * @brief HTTP server wrapper thread macros and structures. - * @addtogroup WEB_THREAD - * @{ - */ - -#ifndef _WEB_H_ -#define _WEB_H_ - -#ifndef WEB_THREAD_STACK_SIZE -#define WEB_THREAD_STACK_SIZE 1024 -#endif - -#ifndef WEB_THREAD_PORT -#define WEB_THREAD_PORT 80 -#endif - -#ifndef WEB_THREAD_PRIORITY -#define WEB_THREAD_PRIORITY (LOWPRIO + 2) -#endif - -extern THD_WORKING_AREA(wa_http_server, WEB_THREAD_STACK_SIZE); - -#ifdef __cplusplus -extern "C" { -#endif - THD_FUNCTION(http_server, p); -#ifdef __cplusplus -} -#endif - -#endif /* _WEB_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/.cproject b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/.cproject deleted file mode 100644 index dff1605..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/.cproject +++ /dev/null @@ -1,51 +0,0 @@ -<?xml version="1.0" encoding="UTF-8" standalone="no"?> -<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage"> - <storageModule moduleId="org.eclipse.cdt.core.settings"> - <cconfiguration id="0.114656749"> - <storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default"> - <externalSettings/> - <extensions> - <extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - <extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/> - </extensions> - </storageModule> - <storageModule moduleId="cdtBuildSystem" version="4.0.0"> - <configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg"> - <folderInfo id="0.114656749." name="/" resourcePath=""> - <toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain"> - <targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/> - <builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/> - <tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/> - <tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder"> - <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> - </tool> - <tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder"> - <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> - </tool> - <tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder"> - <inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/> - </tool> - </toolChain> - </folderInfo> - </configuration> - </storageModule> - <storageModule moduleId="org.eclipse.cdt.core.externalSettings"/> - </cconfiguration> - </storageModule> - <storageModule moduleId="cdtBuildSystem" version="4.0.0"> - <project id="RT-TM4C1294-LAUNCHPAD.null.1703860681" name="RT-TM4C1294-LAUNCHPAD"/> - </storageModule> - <storageModule moduleId="scannerConfiguration"> - <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/> - <scannerConfigBuildInfo instanceId="0.114656749"> - <autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/> - </scannerConfigBuildInfo> - </storageModule> - <storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/> - <storageModule moduleId="refreshScope"/> - <storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/> -</cproject> diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/.project b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/.project deleted file mode 100644 index 09271d4..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/.project +++ /dev/null @@ -1,54 +0,0 @@ -<?xml version="1.0" encoding="UTF-8"?> -<projectDescription> - <name>RT-TM4C1294-LAUNCHPAD</name> - <comment></comment> - <projects> - </projects> - <buildSpec> - <buildCommand> - <name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name> - <triggers>clean,full,incremental,</triggers> - <arguments> - </arguments> - </buildCommand> - <buildCommand> - <name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name> - <triggers>full,incremental,</triggers> - <arguments> - </arguments> - </buildCommand> - </buildSpec> - <natures> - <nature>org.eclipse.cdt.core.cnature</nature> - <nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature> - <nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature> - </natures> - <linkedResources> - <link> - <name>board</name> - <type>2</type> - <locationURI>CHIBIOS3/community/os/hal/boards/TI_TM4C1294_LAUNCHPAD</locationURI> - </link> - <link> - <name>community_os</name> - <type>2</type> - <locationURI>CHIBIOS3/community/os</locationURI> - </link> - <link> - <name>os</name> - <type>2</type> - <locationURI>CHIBIOS3/os</locationURI> - </link> - <link> - <name>test</name> - <type>2</type> - <locationURI>CHIBIOS3/test</locationURI> - </link> - </linkedResources> - <variableList> - <variable> - <name>CHIBIOS3</name> - <value>file:/C:/ChibiStudio/chibios3</value> - </variable> - </variableList> -</projectDescription> diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/Makefile b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/Makefile deleted file mode 100644 index 63815df..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/Makefile +++ /dev/null @@ -1,212 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = yes -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU on Cortex-M4 (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = hard -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_tm4c129x.mk -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/TIVA/TM4C129x/platform.mk -include $(CHIBIOS_CONTRIB)/os/hal/boards/TI_TM4C1294_LAUNCHPAD/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk - -# Define linker script file here -LDSCRIPT= $(STARTUPLD)/TM4C129xNC.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(CHIBIOS)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/chconf.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/chconf.h deleted file mode 100644 index 15db44a..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/chconf.h +++ /dev/null @@ -1,509 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _CHCONF_H_ -#define _CHCONF_H_ - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 10000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** - * @brief Realtime Counter frequency. - * @details Frequency of the system counter used for realtime delays and - * measurements. - */ -#define CH_CFG_RTC_FREQUENCY 120000000 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS TRUE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES TRUE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES TRUE - -/** - * @brief I/O Queues APIs. - * @details If enabled then the I/O queues APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_QUEUES TRUE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS TRUE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS FALSE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK FALSE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS FALSE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS FALSE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the context switch circular trace buffer is - * activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_TRACE FALSE - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK FALSE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS FALSE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - * - * @note It is inserted into lock zone. - * @note It is also invoked when the threads simply return in order to - * terminate. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* System halt code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* _CHCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/halconf.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/halconf.h deleted file mode 100644 index cd6edf3..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/halconf.h +++ /dev/null @@ -1,294 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_H_ -#define _HALCONF_H_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL TRUE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 64 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* _HALCONF_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/main.c b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/main.c deleted file mode 100644 index 5184e3e..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/main.c +++ /dev/null @@ -1,114 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" -#include "ch_test.h" - -typedef struct led_config -{ - ioportid_t port; - uint32_t sleep; - uint8_t pin; -} led_config_t; - -/* - * LED blinker thread. - */ -static THD_WORKING_AREA(waBlinkLed1, 128); -static THD_WORKING_AREA(waBlinkLed2, 128); -static THD_WORKING_AREA(waBlinkLed3, 128); -static THD_WORKING_AREA(waBlinkLed4, 128); -static THD_FUNCTION(blinkLed, arg) { - led_config_t *ledConfig = (led_config_t*) arg; - - chRegSetThreadName("Blinker"); - - /* Configure pin as push-pull output.*/ - palSetPadMode(ledConfig->port, ledConfig->pin, PAL_MODE_OUTPUT_PUSHPULL); - - while (TRUE) { - chThdSleepMilliseconds(ledConfig->sleep); - palTogglePad(ledConfig->port, ledConfig->pin); - } -} - -/* - * Application entry point. - */ -int main(void) -{ - led_config_t led1, led2, led3, led4; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - - /* Configure RX and TX pins for UART0.*/ - palSetPadMode(GPIOA, GPIOA_UART0_RX, PAL_MODE_INPUT | PAL_MODE_ALTERNATE(1)); - palSetPadMode(GPIOA, GPIOA_UART0_TX, PAL_MODE_INPUT | PAL_MODE_ALTERNATE(1)); - - /* Start the serial driver with the default configuration.*/ - sdStart(&SD1, NULL); - - if (!palReadPad(GPIOJ, GPIOJ_SW1)) { - test_execute((BaseSequentialStream *)&SD1); - } - - led1.port = GPIOF; - led1.pin = GPIOF_LED0; - led1.sleep = 100; - - led2.port = GPIOF; - led2.pin = GPIOF_LED1; - led2.sleep = 101; - - led3.port = GPION; - led3.pin = GPION_LED2; - led3.sleep = 102; - - led4.port = GPION; - led4.pin = GPION_LED3; - led4.sleep = 103; - - /* Creating the blinker threads.*/ - chThdCreateStatic(waBlinkLed1, sizeof(waBlinkLed1), NORMALPRIO, blinkLed, - &led1); - - chThdCreateStatic(waBlinkLed2, sizeof(waBlinkLed2), NORMALPRIO, blinkLed, - &led2); - - chThdCreateStatic(waBlinkLed3, sizeof(waBlinkLed3), NORMALPRIO, blinkLed, - &led3); - - chThdCreateStatic(waBlinkLed4, sizeof(waBlinkLed4), NORMALPRIO, blinkLed, - &led4); - - /* - * Normal main() thread activity - */ - while (TRUE) { - chThdSleepMilliseconds(100); - } - - return 0; -} diff --git a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/mcuconf.h b/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/mcuconf.h deleted file mode 100644 index 3abab92..0000000 --- a/ChibiOS_16.1.5/community/demos/TIVA/RT-TM4C1294-LAUNCHPAD/mcuconf.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - Copyright (C) 2014..2016 Marco Veeneman - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * TM4C129x drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 7...0 Lowest...Highest. - */ - -#define TM4C129x_MCUCONF - -/* - * HAL driver system settings. - */ -#define TIVA_MOSC_SINGLE_ENDED FALSE -#define TIVA_RSCLKCFG_OSCSRC RSCLKCFG_OSCSRC_MOSC - -/* - * GPT driver system settings. - */ -#define TIVA_GPT_USE_GPT0 FALSE -#define TIVA_GPT_USE_GPT1 FALSE -#define TIVA_GPT_USE_GPT2 FALSE -#define TIVA_GPT_USE_GPT3 FALSE -#define TIVA_GPT_USE_GPT4 FALSE -#define TIVA_GPT_USE_GPT5 FALSE -#define TIVA_GPT_USE_GPT6 FALSE -#define TIVA_GPT_USE_GPT7 FALSE -#define TIVA_GPT_GPT0A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT1A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT2A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT3A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT4A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT5A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT6A_IRQ_PRIORITY 7 -#define TIVA_GPT_GPT7A_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define TIVA_I2C_USE_I2C0 FALSE -#define TIVA_I2C_USE_I2C1 FALSE -#define TIVA_I2C_USE_I2C2 FALSE -#define TIVA_I2C_USE_I2C3 FALSE -#define TIVA_I2C_USE_I2C4 FALSE -#define TIVA_I2C_USE_I2C5 FALSE -#define TIVA_I2C_USE_I2C6 FALSE -#define TIVA_I2C_USE_I2C7 FALSE -#define TIVA_I2C_USE_I2C8 FALSE -#define TIVA_I2C_USE_I2C9 FALSE -#define TIVA_I2C_I2C0_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C1_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C2_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C3_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C4_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C5_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C6_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C7_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C8_IRQ_PRIORITY 4 -#define TIVA_I2C_I2C9_IRQ_PRIORITY 4 - -/* - * PWM driver system settings. - */ -#define TIVA_PWM_USE_PWM0 FALSE -#define TIVA_PWM_PWM0_FAULT_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_0_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_1_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_2_IRQ_PRIORITY 4 -#define TIVA_PWM_PWM0_3_IRQ_PRIORITY 4 - -/* - * SERIAL driver system settings. - */ -#define TIVA_SERIAL_USE_UART0 TRUE -#define TIVA_SERIAL_USE_UART1 FALSE -#define TIVA_SERIAL_USE_UART2 FALSE -#define TIVA_SERIAL_USE_UART3 FALSE -#define TIVA_SERIAL_USE_UART4 FALSE -#define TIVA_SERIAL_USE_UART5 FALSE -#define TIVA_SERIAL_USE_UART6 FALSE -#define TIVA_SERIAL_USE_UART7 FALSE -#define TIVA_SERIAL_UART0_PRIORITY 5 -#define TIVA_SERIAL_UART1_PRIORITY 5 -#define TIVA_SERIAL_UART2_PRIORITY 5 -#define TIVA_SERIAL_UART3_PRIORITY 5 -#define TIVA_SERIAL_UART4_PRIORITY 5 -#define TIVA_SERIAL_UART5_PRIORITY 5 -#define TIVA_SERIAL_UART6_PRIORITY 5 -#define TIVA_SERIAL_UART7_PRIORITY 5 - -/* - * ST driver system settings. - */ -#define TIVA_ST_IRQ_PRIORITY 2 -#define TIVA_ST_USE_WIDE_TIMER FALSE -#define TIVA_ST_TIMER_NUMBER 5 -#define TIVA_ST_TIMER_LETTER A |