diff options
Diffstat (limited to 'ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969')
12 files changed, 0 insertions, 3173 deletions
diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/Makefile b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/Makefile deleted file mode 100644 index cf81f18..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/Makefile +++ /dev/null @@ -1,206 +0,0 @@ -##############################################################################
-# Build global options
-# NOTE: Can be overridden externally.
-#
-
-# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPTIMIZE = 0
-
-# Debugging format.
-DEBUG =
-#DEBUG = stabs
-
-# Memory/data model
-MODEL = small
-
-# Object files directory
-# To put object files in current directory, use a dot (.), do NOT make
-# this an empty or blank macro!
-OBJDIR = .
-
-# Compiler flag to set the C Standard level.
-# c89 = "ANSI" C
-# gnu89 = c89 plus GCC extensions
-# c99 = ISO C99 standard (not yet fully implemented)
-# gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=gnu11
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
- USE_OPT = -O$(OPTIMIZE) -g$(DEBUG)
- USE_OPT += -funsigned-char -fshort-enums
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
- USE_COPT =
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
- USE_CPPOPT = -fno-rtti
-endif
-
-# Enable this if you want the linker to remove unused code and data
-ifeq ($(USE_LINK_GC),)
- USE_LINK_GC = yes
-endif
-
-# Linker extra options here.
-ifeq ($(USE_LDOPT),)
- USE_LDOPT =
-endif
-
-# Enable this if you want link time optimizations (LTO)
-ifeq ($(USE_LTO),)
- USE_LTO = no
-endif
-
-# Enable the selected hardware multiplier
-ifeq ($(USE_HWMULT),)
- USE_HWMULT = f5series
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
- USE_VERBOSE_COMPILE = yes
-endif
-
-# If enabled, this option makes the build process faster by not compiling
-# modules not used in the current configuration.
-ifeq ($(USE_SMART_BUILD),)
- USE_SMART_BUILD = yes
-endif
-
-#
-# Build global options
-##############################################################################
-
-##############################################################################
-# Architecture or project specific options
-#
-
-# Stack size to be allocated to the idle thread stack. This stack is
-# the stack used by the main() thread.
-ifeq ($(USE_IDLE_STACKSIZE),)
- USE_IDLE_STACKSIZE = 0xC00
-endif
-
-#
-# Architecture or project specific options
-##############################################################################
-
-##############################################################################
-# Project, sources and paths
-#
-
-# Define project name here
-PROJECT = nil
-
-# Imported source files and paths
-CHIBIOS = ../../../../../ChibiOS-RT
-CHIBIOS_CONTRIB = ../../../..
-# Startup files.
-include $(CHIBIOS_CONTRIB)/os/common/startup/MSP430X/compilers/GCC/mk/startup_msp430fr5xxx.mk
-# HAL-OSAL files (optional).
-include $(CHIBIOS)/os/hal/hal.mk
-include $(CHIBIOS_CONTRIB)/os/hal/boards/EXP430FR5969/board.mk
-include $(CHIBIOS_CONTRIB)/os/hal/ports/MSP430X/platform.mk
-include $(CHIBIOS)/os/hal/osal/nil/osal.mk
-# RTOS files (optional).
-include $(CHIBIOS)/os/nil/nil.mk
-include $(CHIBIOS_CONTRIB)/os/common/ports/MSP430X/compilers/GCC/mk/port.mk
-# Other files (optional).
-
-# Define linker script file here
-LDSCRIPT = $(STARTUPLD)/msp430fr5969.ld
-
-# C sources
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
- $(TESTSRC) \
- msp_vectors.c \
- main.c
-
-# C++ sources
-CPPSRC =
-
-# List ASM source files here
-ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
-
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
- $(CHIBIOS)/os/various
-
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
-
-MCU = msp430fr5969
-
-TRGT = msp430-elf-
-CC = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-AR = $(TRGT)ar
-OD = $(TRGT)objdump
-SZ = $(TRGT)size
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-
-# MSP430-specific options here
-MOPT = -m$(MODEL)
-
-# Define C warning options here
-CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
-
-# Define C++ warning options here
-CPPWARN = -Wall -Wextra -Wundef
-
-#
-# Compiler settings
-##############################################################################
-
-##############################################################################
-# Start of user section
-#
-
-# List all user C define here, like -D_DEBUG=1
-UDEFS =
-
-# Define ASM defines here
-UADEFS =
-
-# List all user directories here
-UINCDIR =
-
-# List the user directory to look for the libraries here
-ULIBDIR =
-
-# List all user libraries here
-ULIBS =
-
-#
-# End of user defines
-##############################################################################
-
-RULESPATH = $(CHIBIOS_CONTRIB)/os/common/startup/MSP430X/compilers/GCC
-include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/chconf.h b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/chconf.h deleted file mode 100644 index cb45526..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/chconf.h +++ /dev/null @@ -1,274 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file nilconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_NIL_CONF_
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Number of user threads in the application.
- * @note This number is not inclusive of the idle thread which is
- * Implicitly handled.
- */
-#define CH_CFG_NUM_THREADS 1
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name System timer settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System time counter resolution.
- * @note Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION 16
-
-/**
- * @brief System tick frequency.
- * @note This value together with the @p CH_CFG_ST_RESOLUTION
- * option defines the maximum amount of time allowed for
- * timeouts.
- */
-#define CH_CFG_ST_FREQUENCY 1000
-
-/**
- * @brief Time delta constant for the tick-less mode.
- * @note If this value is zero then the system uses the classic
- * periodic tick. This value represents the minimum number
- * of ticks that is safe to specify in a timeout directive.
- * The value one is not valid, timeouts are rounded up to
- * this value.
- */
-#define CH_CFG_ST_TIMEDELTA 0
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES TRUE
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note Feature not currently implemented.
- * @note The default is @p FALSE.
- */
-#define CH_CFG_USE_MUTEXES FALSE
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS TRUE
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES TRUE
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE TRUE
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_HEAP TRUE
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS TRUE
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE 0
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, kernel statistics.
- *
- * @note Feature not currently implemented.
- * @note The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS FALSE
-
-/**
- * @brief Debug option, system state check.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
-
-/**
- * @brief Debug option, parameters checks.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS FALSE
-
-/**
- * @brief System assertions.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS FALSE
-
-/**
- * @brief Stack check.
- *
- *@note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_STACK_CHECK TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System initialization hook.
- */
-#if !defined(CH_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__)
-#define CH_CFG_SYSTEM_INIT_HOOK() { \
-}
-#endif
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXT_FIELDS \
- /* Add threads custom fields here.*/
-
-/**
- * @brief Threads initialization hook.
- */
-#define CH_CFG_THREAD_EXT_INIT_HOOK(tr) { \
- /* Add custom threads initialization code here.*/ \
-}
-
-/**
- * @brief Idle thread enter hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() { \
-}
-
-/**
- * @brief Idle thread leave hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() { \
-}
-
-/**
- * @brief System halt hook.
- */
-#if !defined(CH_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
-}
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in nilcore.h). */
-/*===========================================================================*/
-
-#endif /* _CHCONF_H_ */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/halconf.h b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/halconf.h deleted file mode 100644 index 81a620d..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/halconf.h +++ /dev/null @@ -1,388 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the DMA subsystem.
- */
-#if !defined(HAL_USE_DMA) || defined(__DOXYGEN__)
-#define HAL_USE_DMA TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL TRUE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT FALSE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION FALSE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE FALSE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION FALSE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS FALSE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING FALSE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING FALSE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 16 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 256 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
-#endif
-
-/**
- * @brief Serial over USB number of buffers.
- * @note The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER 2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT FALSE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION FALSE
-#endif
-
-/*===========================================================================*/
-/* UART driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT FALSE
-#endif
-
-/**
- * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT FALSE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/main.c b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/main.c deleted file mode 100644 index 1929af1..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/main.c +++ /dev/null @@ -1,293 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-#include "hal_dma_lld.h"
-#include "string.h"
-
-const char * start_msg = "\r\n\r\nExecuting DMA test suite...\r\n";
-const char * test_1_msg =
- "TEST 1: Word-to-word memcpy with DMA engine, no callbacks\r\n";
-const char * test_2_msg =
- "TEST 2: Byte-to-byte memcpy with DMA engine, no callbacks\r\n";
-const char * test_3_msg =
- "TEST 3: Byte-to-byte memset with DMA engine, no callbacks\r\n";
-const char * test_4_msg =
- "TEST 4: Word-to-word memcpy with DMA engine, with callback\r\n";
-const char * test_5_msg =
- "TEST 5: Claim DMA channel 0, perform a Word-to-word memcpy\r\n";
-const char * test_6_msg = "TEST 6: Attempt to claim already claimed DMA "
- "channel, fail. Release it, try to claim it again, "
- "and succeed.\r\n";
-const char * test_7_msg = "TEST 7: Claim DMA channel 1, perform a Word-to-word "
- "memcpy, and release it\r\n";
-
-const char * succeed_string = "SUCCESS\r\n\r\n";
-const char * fail_string = "FAILURE\r\n\r\n";
-
-char instring[256];
-char outstring[256];
-msp430x_dma_req_t * request;
-uint8_t cb_arg = 1;
-
-void dma_callback_test(void * args) {
-
- *((uint8_t *)args) = 0;
-}
-
-msp430x_dma_req_t test_1_req = {
- instring, /* source address */
- outstring, /* destination address */
- 9, /* number of words */
- MSP430X_DMA_SRCINCR | MSP430X_DMA_DSTINCR, /* address mode - dual increment */
- MSP430X_DMA_SRCWORD | MSP430X_DMA_DSTWORD, /* word transfer */
- MSP430X_DMA_BLOCK, /* block (and blocking) transfer */
- DMA_TRIGGER_MNEM(DMAREQ), /* software-requested trigger */
- {
- NULL, /* no callback */
- NULL /* no arguments */
- }
-};
-
-msp430x_dma_req_t test_2_req = {
- instring, /* source address */
- outstring, /* destination address */
- 18, /* number of bytes */
- MSP430X_DMA_SRCINCR | MSP430X_DMA_DSTINCR, /* address mode - dual increment */
- MSP430X_DMA_SRCBYTE | MSP430X_DMA_DSTBYTE, /* byte transfer */
- MSP430X_DMA_BLOCK, /* block (and blocking) transfer */
- DMA_TRIGGER_MNEM(DMAREQ), /* software-requested trigger */
- {
- NULL, /* no callback */
- NULL /* no arguments */
- }
-};
-
-msp430x_dma_req_t test_3_req = {
- instring, /* source address */
- outstring, /* destination address */
- 16, /* number of words */
- MSP430X_DMA_DSTINCR, /* address mode - dest increment only */
- MSP430X_DMA_SRCBYTE | MSP430X_DMA_DSTBYTE, /* word transfer */
- MSP430X_DMA_BLOCK, /* block (and blocking) transfer */
- DMA_TRIGGER_MNEM(DMAREQ), /* software-requested trigger */
- {
- NULL, /* no callback */
- NULL /* no arguments */
- }
-};
-
-msp430x_dma_req_t test_4_req = {
- instring, /* source address */
- outstring, /* destination address */
- 9, /* number of words */
- MSP430X_DMA_SRCINCR | MSP430X_DMA_DSTINCR, /* address mode - dual increment */
- MSP430X_DMA_SRCWORD | MSP430X_DMA_DSTWORD, /* word transfer */
- MSP430X_DMA_BLOCK, /* block (and blocking) transfer */
- DMA_TRIGGER_MNEM(DMAREQ), /* software-requested trigger */
- {
- &dma_callback_test, /* test callback */
- &cb_arg /* test arguments */
- }
-};
-
-msp430x_dma_req_t test_5_req = {
- instring, /* source address */
- outstring, /* destination address */
- 9, /* number of words */
- MSP430X_DMA_SRCINCR | MSP430X_DMA_DSTINCR, /* address mode - dual increment */
- MSP430X_DMA_SRCWORD | MSP430X_DMA_DSTWORD, /* word transfer */
- MSP430X_DMA_BLOCK, /* block (and blocking) transfer */
- DMA_TRIGGER_MNEM(DMAREQ), /* software-requested trigger */
- {
- NULL, /* no callback */
- NULL /* no arguments */
- }
-};
-
-msp430x_dma_ch_t ch = { NULL, 0, NULL };
-
-/*
- * Thread 2.
- */
-THD_WORKING_AREA(waThread1, 2048);
-THD_FUNCTION(Thread1, arg) {
-
- (void)arg;
-
- /*
- * Activate the serial driver 0 using the driver default configuration.
- */
- sdStart(&SD0, NULL);
-
- while (chnGetTimeout(&SD0, TIME_INFINITE)) {
- chnWrite(&SD0, (const uint8_t *)start_msg, strlen(start_msg));
- chThdSleepMilliseconds(2000);
-
- /* Test 1 - use DMA engine to execute a word-wise memory-to-memory copy. */
- chnWrite(&SD0, (const uint8_t *)test_1_msg, strlen(test_1_msg));
- strcpy(instring, "After DMA test \r\n");
- strcpy(outstring, "Before DMA test \r\n");
- if (strcmp("Before DMA test \r\n", outstring)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- request = &test_1_req;
- dmaRequest(request, TIME_INFINITE);
- if (strcmp("After DMA test \r\n", outstring)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- else {
- chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string));
- }
-
- /* Test 2 - use DMA engine to execute a byte-wise memory-to-memory copy. */
- chnWrite(&SD0, (const uint8_t *)test_2_msg, strlen(test_2_msg));
- strcpy(instring, "After DMA test \r\n");
- strcpy(outstring, "Before DMA test \r\n");
- if (strcmp("Before DMA test \r\n", outstring)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- request = &test_2_req;
- dmaRequest(request, TIME_INFINITE);
- if (strcmp("After DMA test \r\n", outstring)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- else {
- chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string));
- }
-
- /* Test 3 - use DMA engine to execute a word-wise memory-to-memory set. */
- chnWrite(&SD0, (const uint8_t *)test_3_msg, strlen(test_3_msg));
- strcpy(instring, "After DMA test \r\n");
- strcpy(outstring, "Before DMA test \r\n");
- if (strcmp("Before DMA test \r\n", outstring)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- request = &test_3_req;
- dmaRequest(request, TIME_INFINITE);
- if (strcmp("AAAAAAAAAAAAAAAA\r\n", outstring)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- else {
- chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string));
- }
-
- /* Test 4 - use DMA engine to execute a word-wise memory-to-memory copy,
- * then call a callback. */
- chnWrite(&SD0, (const uint8_t *)test_4_msg, strlen(test_4_msg));
- strcpy(instring, "After DMA test \r\n");
- strcpy(outstring, "Before DMA test \r\n");
- cb_arg = 1;
- if (strcmp("Before DMA test \r\n", outstring) || (cb_arg != 1)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- request = &test_4_req;
- dmaRequest(request, TIME_INFINITE);
- if (strcmp("After DMA test \r\n", outstring) || cb_arg) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- else {
- chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string));
- }
-
- /* Test 5 - use exclusive DMA channel 0 to execute a word-wise
- * memory-to-memory copy. */
- chnWrite(&SD0, (const uint8_t *)test_5_msg, strlen(test_5_msg));
- strcpy(instring, "After DMA test \r\n");
- strcpy(outstring, "Before DMA test \r\n");
- if (strcmp("Before DMA test \r\n", outstring)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- request = &test_5_req;
- dmaAcquire(&ch, 0);
- dmaTransfer(&ch, request);
- if (strcmp("After DMA test \r\n", outstring)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- else {
- chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string));
- }
-
- /* Test 6 - Attempt to claim DMA channel 0, fail, release it, attempt to
- * claim it again */
- chnWrite(&SD0, (const uint8_t *)test_6_msg, strlen(test_6_msg));
- if (!dmaAcquire(&ch, 0)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- dmaRelease(&ch);
- if (dmaAcquire(&ch, 0)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- else {
- chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string));
- }
- dmaRelease(&ch);
-
- /* Test 7 - use exclusive DMA channel 1 to execute a word-wise
- * memory-to-memory copy. */
- chnWrite(&SD0, (const uint8_t *)test_7_msg, strlen(test_7_msg));
- strcpy(instring, "After DMA test \r\n");
- strcpy(outstring, "Before DMA test \r\n");
- if (strcmp("Before DMA test \r\n", outstring)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- request = &test_5_req;
- dmaAcquire(&ch, 1);
- dmaTransfer(&ch, request);
- if (strcmp("After DMA test \r\n", outstring)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- else {
- chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string));
- }
- dmaRelease(&ch);
- }
-}
-
-/*
- * Threads static table, one entry per thread. The number of entries must
- * match NIL_CFG_NUM_THREADS.
- */
-THD_TABLE_BEGIN
- THD_TABLE_ENTRY(waThread1, "dma_test", Thread1, NULL)
-THD_TABLE_END
-
-/*
- * Application entry point.
- */
-int main(void) {
-
- /*
- * System initializations.
- * - HAL initialization, this also initializes the configured device drivers
- * and performs the board-specific initializations.
- * - Kernel initialization, the main() function becomes a thread and the
- * RTOS is active.
- */
- WDTCTL = WDTPW | WDTHOLD;
-
- halInit();
- chSysInit();
- dmaInit();
-
- /* This is now the idle thread loop, you may perform here a low priority
- task but you must never try to sleep or wait in this loop. Note that
- this tasks runs at the lowest priority level so any instruction added
- here will be executed after all other tasks have been started.*/
- while (true) {
- }
-}
diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/mcuconf.h b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/mcuconf.h deleted file mode 100644 index f47ee12..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/mcuconf.h +++ /dev/null @@ -1,55 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * MSP430X drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the driver
- * is enabled in halconf.h.
- *
- */
-
-#define MSP430X_MCUCONF
-
-/* HAL driver system settings */
-#define MSP430X_ACLK_SRC MSP430X_VLOCLK
-#define MSP430X_LFXTCLK_FREQ 0
-#define MSP430X_HFXTCLK_FREQ 0
-#define MSP430X_DCOCLK_FREQ 8000000
-#define MSP430X_MCLK_DIV 1
-#define MSP430X_SMCLK_DIV 32
-
-/*
- * SERIAL driver system settings.
- */
-#define MSP430X_SERIAL_USE_USART0 TRUE
-#define MSP430X_USART0_CLK_SRC MSP430X_SMCLK_SRC
-#define MSP430X_SERIAL_USE_USART1 FALSE
-#define MSP430X_SERIAL_USE_USART2 FALSE
-#define MSP430X_SERIAL_USE_USART3 FALSE
-
-/*
- * ST driver system settings.
- */
-#define MSP430X_ST_CLK_SRC MSP430X_SMCLK_SRC
-#define MSP430X_ST_TIMER_TYPE B
-#define MSP430X_ST_TIMER_INDEX 0
-
-#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/msp_vectors.c b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/msp_vectors.c deleted file mode 100644 index 8968fb9..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/DMA/msp_vectors.c +++ /dev/null @@ -1,316 +0,0 @@ -#include <msp430.h>
-
-__attribute__((interrupt(1)))
-void Vector1(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(2)))
-void Vector2(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(3)))
-void Vector3(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(4)))
-void Vector4(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(5)))
-void Vector5(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(6)))
-void Vector6(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(7)))
-void Vector7(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(8)))
-void Vector8(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(9)))
-void Vector9(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(10)))
-void Vector10(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(11)))
-void Vector11(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(12)))
-void Vector12(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(13)))
-void Vector13(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(14)))
-void Vector14(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(15)))
-void Vector15(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(16)))
-void Vector16(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(17)))
-void Vector17(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(18)))
-void Vector18(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(19)))
-void Vector19(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(20)))
-void Vector20(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(21)))
-void Vector21(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(22)))
-void Vector22(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(23)))
-void Vector23(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(24)))
-void Vector24(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(25)))
-void Vector25(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(26)))
-void Vector26(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(27)))
-void Vector27(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(28)))
-void Vector28(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(29)))
-void Vector29(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(30)))
-void Vector30(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(31)))
-void Vector31(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(32)))
-void Vector32(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(33)))
-void Vector33(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(34)))
-void Vector34(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(35)))
-void Vector35(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(36)))
-void Vector36(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(37)))
-void Vector37(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(38)))
-void Vector38(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(39)))
-void Vector39(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(40)))
-void Vector40(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(41)))
-void Vector41(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(42)))
-void Vector42(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(44)))
-void Vector44(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(45)))
-void Vector45(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(46)))
-void Vector46(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(47)))
-void Vector47(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(48)))
-void Vector48(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(50)))
-void Vector50(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(51)))
-void Vector51(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(53)))
-void Vector53(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(54)))
-void Vector54(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(55)))
-void Vector55(void) {
-
- while (1) {
- }
-}
-
-
diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/Makefile b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/Makefile deleted file mode 100644 index cf81f18..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/Makefile +++ /dev/null @@ -1,206 +0,0 @@ -##############################################################################
-# Build global options
-# NOTE: Can be overridden externally.
-#
-
-# Optimization level, can be [0, 1, 2, 3, s].
-# 0 = turn off optimization. s = optimize for size.
-# (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
-OPTIMIZE = 0
-
-# Debugging format.
-DEBUG =
-#DEBUG = stabs
-
-# Memory/data model
-MODEL = small
-
-# Object files directory
-# To put object files in current directory, use a dot (.), do NOT make
-# this an empty or blank macro!
-OBJDIR = .
-
-# Compiler flag to set the C Standard level.
-# c89 = "ANSI" C
-# gnu89 = c89 plus GCC extensions
-# c99 = ISO C99 standard (not yet fully implemented)
-# gnu99 = c99 plus GCC extensions
-CSTANDARD = -std=gnu11
-
-# Compiler options here.
-ifeq ($(USE_OPT),)
- USE_OPT = -O$(OPTIMIZE) -g$(DEBUG)
- USE_OPT += -funsigned-char -fshort-enums
-endif
-
-# C specific options here (added to USE_OPT).
-ifeq ($(USE_COPT),)
- USE_COPT =
-endif
-
-# C++ specific options here (added to USE_OPT).
-ifeq ($(USE_CPPOPT),)
- USE_CPPOPT = -fno-rtti
-endif
-
-# Enable this if you want the linker to remove unused code and data
-ifeq ($(USE_LINK_GC),)
- USE_LINK_GC = yes
-endif
-
-# Linker extra options here.
-ifeq ($(USE_LDOPT),)
- USE_LDOPT =
-endif
-
-# Enable this if you want link time optimizations (LTO)
-ifeq ($(USE_LTO),)
- USE_LTO = no
-endif
-
-# Enable the selected hardware multiplier
-ifeq ($(USE_HWMULT),)
- USE_HWMULT = f5series
-endif
-
-# Enable this if you want to see the full log while compiling.
-ifeq ($(USE_VERBOSE_COMPILE),)
- USE_VERBOSE_COMPILE = yes
-endif
-
-# If enabled, this option makes the build process faster by not compiling
-# modules not used in the current configuration.
-ifeq ($(USE_SMART_BUILD),)
- USE_SMART_BUILD = yes
-endif
-
-#
-# Build global options
-##############################################################################
-
-##############################################################################
-# Architecture or project specific options
-#
-
-# Stack size to be allocated to the idle thread stack. This stack is
-# the stack used by the main() thread.
-ifeq ($(USE_IDLE_STACKSIZE),)
- USE_IDLE_STACKSIZE = 0xC00
-endif
-
-#
-# Architecture or project specific options
-##############################################################################
-
-##############################################################################
-# Project, sources and paths
-#
-
-# Define project name here
-PROJECT = nil
-
-# Imported source files and paths
-CHIBIOS = ../../../../../ChibiOS-RT
-CHIBIOS_CONTRIB = ../../../..
-# Startup files.
-include $(CHIBIOS_CONTRIB)/os/common/startup/MSP430X/compilers/GCC/mk/startup_msp430fr5xxx.mk
-# HAL-OSAL files (optional).
-include $(CHIBIOS)/os/hal/hal.mk
-include $(CHIBIOS_CONTRIB)/os/hal/boards/EXP430FR5969/board.mk
-include $(CHIBIOS_CONTRIB)/os/hal/ports/MSP430X/platform.mk
-include $(CHIBIOS)/os/hal/osal/nil/osal.mk
-# RTOS files (optional).
-include $(CHIBIOS)/os/nil/nil.mk
-include $(CHIBIOS_CONTRIB)/os/common/ports/MSP430X/compilers/GCC/mk/port.mk
-# Other files (optional).
-
-# Define linker script file here
-LDSCRIPT = $(STARTUPLD)/msp430fr5969.ld
-
-# C sources
-CSRC = $(STARTUPSRC) \
- $(KERNSRC) \
- $(PORTSRC) \
- $(OSALSRC) \
- $(HALSRC) \
- $(PLATFORMSRC) \
- $(BOARDSRC) \
- $(TESTSRC) \
- msp_vectors.c \
- main.c
-
-# C++ sources
-CPPSRC =
-
-# List ASM source files here
-ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
-
-INCDIR = $(CHIBIOS)/os/license \
- $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
- $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
- $(CHIBIOS)/os/various
-
-#
-# Project, sources and paths
-##############################################################################
-
-##############################################################################
-# Compiler settings
-#
-
-MCU = msp430fr5969
-
-TRGT = msp430-elf-
-CC = $(TRGT)gcc
-CPPC = $(TRGT)g++
-# Enable loading with g++ only if you need C++ runtime support.
-# NOTE: You can use C++ even without C++ support if you are careful. C++
-# runtime support makes code size explode.
-LD = $(TRGT)gcc
-#LD = $(TRGT)g++
-CP = $(TRGT)objcopy
-AS = $(TRGT)gcc -x assembler-with-cpp
-AR = $(TRGT)ar
-OD = $(TRGT)objdump
-SZ = $(TRGT)size
-HEX = $(CP) -O ihex
-BIN = $(CP) -O binary
-
-# MSP430-specific options here
-MOPT = -m$(MODEL)
-
-# Define C warning options here
-CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
-
-# Define C++ warning options here
-CPPWARN = -Wall -Wextra -Wundef
-
-#
-# Compiler settings
-##############################################################################
-
-##############################################################################
-# Start of user section
-#
-
-# List all user C define here, like -D_DEBUG=1
-UDEFS =
-
-# Define ASM defines here
-UADEFS =
-
-# List all user directories here
-UINCDIR =
-
-# List the user directory to look for the libraries here
-ULIBDIR =
-
-# List all user libraries here
-ULIBS =
-
-#
-# End of user defines
-##############################################################################
-
-RULESPATH = $(CHIBIOS_CONTRIB)/os/common/startup/MSP430X/compilers/GCC
-include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/chconf.h b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/chconf.h deleted file mode 100644 index cb45526..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/chconf.h +++ /dev/null @@ -1,274 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file nilconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_NIL_CONF_
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Number of user threads in the application.
- * @note This number is not inclusive of the idle thread which is
- * Implicitly handled.
- */
-#define CH_CFG_NUM_THREADS 1
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name System timer settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System time counter resolution.
- * @note Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION 16
-
-/**
- * @brief System tick frequency.
- * @note This value together with the @p CH_CFG_ST_RESOLUTION
- * option defines the maximum amount of time allowed for
- * timeouts.
- */
-#define CH_CFG_ST_FREQUENCY 1000
-
-/**
- * @brief Time delta constant for the tick-less mode.
- * @note If this value is zero then the system uses the classic
- * periodic tick. This value represents the minimum number
- * of ticks that is safe to specify in a timeout directive.
- * The value one is not valid, timeouts are rounded up to
- * this value.
- */
-#define CH_CFG_ST_TIMEDELTA 0
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES TRUE
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note Feature not currently implemented.
- * @note The default is @p FALSE.
- */
-#define CH_CFG_USE_MUTEXES FALSE
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS TRUE
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES TRUE
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE TRUE
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_HEAP TRUE
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS TRUE
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE 0
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, kernel statistics.
- *
- * @note Feature not currently implemented.
- * @note The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS FALSE
-
-/**
- * @brief Debug option, system state check.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
-
-/**
- * @brief Debug option, parameters checks.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS FALSE
-
-/**
- * @brief System assertions.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS FALSE
-
-/**
- * @brief Stack check.
- *
- *@note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_STACK_CHECK TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System initialization hook.
- */
-#if !defined(CH_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__)
-#define CH_CFG_SYSTEM_INIT_HOOK() { \
-}
-#endif
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXT_FIELDS \
- /* Add threads custom fields here.*/
-
-/**
- * @brief Threads initialization hook.
- */
-#define CH_CFG_THREAD_EXT_INIT_HOOK(tr) { \
- /* Add custom threads initialization code here.*/ \
-}
-
-/**
- * @brief Idle thread enter hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() { \
-}
-
-/**
- * @brief Idle thread leave hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() { \
-}
-
-/**
- * @brief System halt hook.
- */
-#if !defined(CH_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
-}
-#endif
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in nilcore.h). */
-/*===========================================================================*/
-
-#endif /* _CHCONF_H_ */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/halconf.h b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/halconf.h deleted file mode 100644 index 083e124..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/halconf.h +++ /dev/null @@ -1,388 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef HALCONF_H
-#define HALCONF_H
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the DMA subsystem.
- */
-#if !defined(HAL_USE_DMA) || defined(__DOXYGEN__)
-#define HAL_USE_DMA TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL TRUE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI TRUE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB FALSE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT FALSE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION FALSE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE FALSE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION FALSE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS FALSE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING FALSE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING FALSE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 16 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 256 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
-#endif
-
-/**
- * @brief Serial over USB number of buffers.
- * @note The default is 2 buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_NUMBER 2
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION FALSE
-#endif
-
-/*===========================================================================*/
-/* UART driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
-#define UART_USE_WAIT FALSE
-#endif
-
-/**
- * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define UART_USE_MUTUAL_EXCLUSION FALSE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT FALSE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/main.c b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/main.c deleted file mode 100644 index 17f5c86..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/main.c +++ /dev/null @@ -1,395 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#include "ch.h"
-#include "hal.h"
-#include "hal_dma_lld.h"
-#include "string.h"
-
-/* Disable watchdog because of lousy startup code in newlib */
-static void __attribute__((naked, section(".crt_0042disable_watchdog"), used))
-disable_watchdog(void) {
- WDTCTL = WDTPW | WDTHOLD;
-}
-
-const char * start_msg = "\r\n\r\nExecuting SPI test suite...\r\n";
-const char * test_1_msg = "TEST 1: spiStartIgnore, with callback\r\n";
-const char * test_2_msg = "TEST 2: spiStartExchange, with callback\r\n";
-const char * test_3_msg = "TEST 3: spiStartSend, with callback\r\n";
-const char * test_4_msg = "TEST 4: spiStartReceive, with callback\r\n";
-const char * test_5_msg = "TEST 5: spiIgnore\r\n";
-const char * test_6_msg = "TEST 6: spiExchange\r\n";
-const char * test_7_msg = "TEST 7: spiSend\r\n";
-const char * test_8_msg = "TEST 8: spiReceive\r\n";
-const char * test_9_msg = "TEST 9: spiStartExchange with exclusive DMA\r\n";
-const char * test_10_msg =
- "TEST 10: spiStartExchange with exclusive DMA for TX\r\n";
-const char * test_11_msg =
- "TEST 11: spiStartExchange with exclusive DMA for RX\r\n";
-
-const char * succeed_string = "SUCCESS\r\n\r\n";
-const char * fail_string = "FAILURE\r\n\r\n";
-
-char instring[256];
-char outstring[256];
-uint8_t cb_arg = 1;
-
-void spi_callback(SPIDriver * spip) {
- (void)spip;
- cb_arg = 0;
-}
-
-SPIConfig SPIDA1_config = {
- spi_callback, /* callback */
- PAL_NOLINE, /* hardware slave select line */
- 250000, /* data rate */
- MSP430X_SPI_BO_LSB, /* bit order */
- MSP430X_SPI_DS_EIGHT, /* data size */
- 0, /* SPI mode */
- 0xFFU, /* no exclusive TX DMA */
- 0xFFU /* no exclusive RX DMA */
-};
-
-SPIConfig SPIDB0_config = {
- NULL, /* callback */
- LINE_LED_G, /* GPIO slave select line */
- 1000, /* data rate */
- MSP430X_SPI_BO_MSB, /* bit order */
- MSP430X_SPI_DS_SEVEN, /* data size */
- 3, /* SPI mode */
- 0xFF, /* no exclusive TX DMA */
- 0xFF /* no exclusive RX DMA */
-};
-
-/*
- * Thread 2.
- */
-THD_WORKING_AREA(waThread1, 4096);
-THD_FUNCTION(Thread1, arg) {
-
- (void)arg;
-
- /* Set up loopback mode for testing */
- SPIDA1.regs->statw_a |= UCLISTEN;
- SPIDB0.regs->statw_b |= UCLISTEN;
-
- /*
- * Activate the serial driver 0 using the driver default configuration.
- */
- sdStart(&SD0, NULL);
-
- /* Activate the SPI driver A1 using its config */
- spiStart(&SPIDA1, &SPIDA1_config);
- /* Activate the SPI driver B0 using its config */
- spiStart(&SPIDB0, &SPIDB0_config);
-
- while (chnGetTimeout(&SD0, TIME_INFINITE)) {
- chnWrite(&SD0, (const uint8_t *)start_msg, strlen(start_msg));
- chThdSleepMilliseconds(2000);
-
- /* Test 1 - spiStartIgnore with callback */
- chnWrite(&SD0, (const uint8_t *)test_1_msg, strlen(test_1_msg));
- strcpy(outstring, "After SPI test \r\n");
- strcpy(instring, "Before SPI test \r\n");
- cb_arg = 1;
- if (strcmp("Before SPI test \r\n", instring) ||
- strcmp("After SPI test \r\n", outstring) || cb_arg != 1) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- spiSelect(&SPIDA1);
- spiStartIgnore(&SPIDA1, strlen(outstring));
- while (SPIDA1.state != SPI_READY)
- ; /* wait for transaction to finish */
- spiUnselect(&SPIDA1);
- if (strcmp("Before SPI test \r\n", instring) ||
- strcmp("After SPI test \r\n", outstring) || cb_arg != 0) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- else {
- chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string));
- }
-
- /* Test 2 - spiStartExchange with callback */
- chnWrite(&SD0, (const uint8_t *)test_2_msg, strlen(test_2_msg));
- strcpy(outstring, "After SPI test \r\n");
- strcpy(instring, "Before SPI test \r\n");
- cb_arg = 1;
- if (strcmp("Before SPI test \r\n", instring) ||
- strcmp("After SPI test \r\n", outstring) || cb_arg != 1) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- spiSelect(&SPIDA1);
- spiStartExchange(&SPIDA1, strlen(instring), outstring, instring);
- while (SPIDA1.state != SPI_READY)
- ; /* wait for transaction to finish */
- spiUnselect(&SPIDA1);
- if (strcmp("After SPI test \r\n", instring) ||
- strcmp("After SPI test \r\n", outstring) || cb_arg != 0) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- else {
- chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string));
- }
-
- /* Test 3 - spiStartSend with callback */
- chnWrite(&SD0, (const uint8_t *)test_3_msg, strlen(test_3_msg));
- strcpy(outstring, "After SPI test \r\n");
- strcpy(instring, "Before SPI test \r\n");
- cb_arg = 1;
- if (strcmp("Before SPI test \r\n", instring) ||
- strcmp("After SPI test \r\n", outstring) || cb_arg != 1) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- spiSelect(&SPIDA1);
- spiStartSend(&SPIDA1, strlen(outstring), outstring);
- while (SPIDA1.state != SPI_READY)
- ; /* wait for transaction to finish */
- spiUnselect(&SPIDA1);
- if (strcmp("Before SPI test \r\n", instring) ||
- strcmp("After SPI test \r\n", outstring) || cb_arg != 0) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- else {
- chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string));
- }
-
- /* Test 4 - spiStartReceive with callback */
- chnWrite(&SD0, (const uint8_t *)test_4_msg, strlen(test_4_msg));
- strcpy(outstring, "After SPI test \r\n");
- strcpy(instring, "Before SPI test \r\n");
- cb_arg = 1;
- if (strcmp("Before SPI test \r\n", instring) ||
- strcmp("After SPI test \r\n", outstring) || cb_arg != 1) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- spiSelect(&SPIDA1);
- chThdSleepMilliseconds(2000);
- spiStartReceive(&SPIDA1, strlen(instring), instring);
- while (SPIDA1.state != SPI_READY)
- ; /* wait for transaction to finish */
- spiUnselect(&SPIDA1);
- if (strcmp("After SPI test \r\n", outstring) ||
- strcmp("\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff"
- "\xff\xff\xff",
- instring) ||
- cb_arg != 0) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- else {
- chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string));
- }
-
- /* Test 5 - spiIgnore */
- chnWrite(&SD0, (const uint8_t *)test_5_msg, strlen(test_5_msg));
- strcpy(instring, "After SPI test \r\n");
- strcpy(outstring, "Before SPI test \r\n");
- if (strcmp("Before SPI test \r\n", outstring) ||
- strcmp("After SPI test \r\n", instring)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- spiSelect(&SPIDB0);
- chThdSleepMilliseconds(2000);
- spiIgnore(&SPIDB0, strlen(outstring));
- spiUnselect(&SPIDB0);
- if (strcmp("After SPI test \r\n", instring) ||
- strcmp("Before SPI test \r\n", outstring)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- else {
- chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string));
- }
-
- /* Test 6 - spiExchange */
- chnWrite(&SD0, (const uint8_t *)test_6_msg, strlen(test_6_msg));
- strcpy(outstring, "After SPI test \r\n");
- strcpy(instring, "Before SPI test \r\n");
- if (strcmp("Before SPI test \r\n", instring) ||
- strcmp("After SPI test \r\n", outstring)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- spiSelect(&SPIDB0);
- spiExchange(&SPIDB0, strlen(outstring), outstring, instring);
- spiUnselect(&SPIDB0);
- if (strcmp("After SPI test \r\n", instring) ||
- strcmp("After SPI test \r\n", outstring)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- else {
- chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string));
- }
-
- /* Test 7 - spiSend */
- chnWrite(&SD0, (const uint8_t *)test_7_msg, strlen(test_7_msg));
- strcpy(outstring, "After SPI test \r\n");
- strcpy(instring, "Before SPI test \r\n");
- if (strcmp("Before SPI test \r\n", instring) ||
- strcmp("After SPI test \r\n", outstring)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- spiSelect(&SPIDB0);
- spiSend(&SPIDB0, strlen(outstring), outstring);
- spiUnselect(&SPIDB0);
- if (strcmp("After SPI test \r\n", outstring) ||
- strcmp("Before SPI test \r\n", instring)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- else {
- chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string));
- }
-
- /* Test 8 - spiReceive */
- chnWrite(&SD0, (const uint8_t *)test_8_msg, strlen(test_8_msg));
- strcpy(outstring, "After SPI test \r\n");
- strcpy(instring, "Before SPI test \r\n");
- if (strcmp("Before SPI test \r\n", instring) ||
- strcmp("After SPI test \r\n", outstring)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- spiSelect(&SPIDB0);
- spiReceive(&SPIDB0, strlen(instring), instring);
- spiUnselect(&SPIDB0);
- if (strcmp("After SPI test \r\n", outstring) ||
- strcmp("\x7f\x7f\x7f\x7f\x7f\x7f\x7f\x7f\x7f\x7f\x7f\x7f\x7f\x7f\x7f"
- "\x7f\x7f\x7f",
- instring)) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- else {
- chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string));
- }
-
- /* Reconfigure SPIDA1 to use exclusive DMA for both */
- spiStop(&SPIDA1);
- SPIDA1_config.dmatx_index = 0;
- SPIDA1_config.dmarx_index = 1;
- SPIDA1_config.spi_mode = 1; /* because why not get coverage */
- spiStart(&SPIDA1, &SPIDA1_config);
-
- /* Test 9 - spiStartExchange with exclusive DMA */
- chnWrite(&SD0, (const uint8_t *)test_9_msg, strlen(test_9_msg));
- strcpy(outstring, "After SPI test \r\n");
- strcpy(instring, "Before SPI test \r\n");
- cb_arg = 1;
- if (strcmp("Before SPI test \r\n", instring) ||
- strcmp("After SPI test \r\n", outstring) || cb_arg != 1) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- spiSelect(&SPIDA1);
- spiStartExchange(&SPIDA1, strlen(outstring), outstring, instring);
- while (SPIDA1.state != SPI_READY)
- ; /* wait for transaction to finish */
- spiUnselect(&SPIDA1);
- if (strcmp("After SPI test \r\n", instring) ||
- strcmp("After SPI test \r\n", outstring) || cb_arg != 0) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- else {
- chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string));
- }
-
- /* Reconfigure SPIDA1 to use exclusive DMA for TX only */
- spiStop(&SPIDA1);
- SPIDA1_config.dmatx_index = 0;
- SPIDA1_config.dmarx_index = 0xFFU;
- SPIDA1_config.spi_mode = 2; /* because why not get coverage */
- spiStart(&SPIDA1, &SPIDA1_config);
-
- /* Test 10 - spiStartExchange with exclusive DMA for TX */
- chnWrite(&SD0, (const uint8_t *)test_10_msg, strlen(test_10_msg));
- strcpy(outstring, "After SPI test \r\n");
- strcpy(instring, "Before SPI test \r\n");
- cb_arg = 1;
- if (strcmp("Before SPI test \r\n", instring) ||
- strcmp("After SPI test \r\n", outstring) || cb_arg != 1) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- spiSelect(&SPIDA1);
- spiStartExchange(&SPIDA1, strlen(outstring), outstring, instring);
- while (SPIDA1.state != SPI_READY)
- ; /* wait for transaction to finish */
- spiUnselect(&SPIDA1);
- if (strcmp("After SPI test \r\n", instring) ||
- strcmp("After SPI test \r\n", outstring) || cb_arg != 0) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- else {
- chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string));
- }
-
- /* Reconfigure SPIDA1 to use exclusive DMA for TX only */
- spiStop(&SPIDA1);
- SPIDA1_config.dmatx_index = 0xFFU;
- SPIDA1_config.dmarx_index = 1;
- SPIDA1_config.spi_mode = 3; /* because why not get coverage */
- spiStart(&SPIDA1, &SPIDA1_config);
-
- /* Test 11 - spiStartExchange with exclusive DMA for RX */
- chnWrite(&SD0, (const uint8_t *)test_11_msg, strlen(test_11_msg));
- strcpy(outstring, "After SPI test \r\n");
- strcpy(instring, "Before SPI test \r\n");
- cb_arg = 1;
- if (strcmp("Before SPI test \r\n", instring) ||
- strcmp("After SPI test \r\n", outstring) || cb_arg != 1) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- spiSelect(&SPIDA1);
- spiStartExchange(&SPIDA1, strlen(outstring), outstring, instring);
- while (SPIDA1.state != SPI_READY)
- ; /* wait for transaction to finish */
- spiUnselect(&SPIDA1);
- if (strcmp("After SPI test \r\n", instring) ||
- strcmp("After SPI test \r\n", outstring) || cb_arg != 0) {
- chnWrite(&SD0, (const uint8_t *)fail_string, strlen(fail_string));
- }
- else {
- chnWrite(&SD0, (const uint8_t *)succeed_string, strlen(succeed_string));
- }
- }
-}
-
-/*
- * Threads static table, one entry per thread. The number of entries must
- * match NIL_CFG_NUM_THREADS.
- */
-THD_TABLE_BEGIN
- THD_TABLE_ENTRY(waThread1, "spi_test", Thread1, NULL)
-THD_TABLE_END
-
-/*
- * Application entry point.
- */
-int main(void) {
-
- /*
- * System initializations.
- * - HAL initialization, this also initializes the configured device drivers
- * and performs the board-specific initializations.
- * - Kernel initialization, the main() function becomes a thread and the
- * RTOS is active.
- */
- WDTCTL = WDTPW | WDTHOLD;
-
- halInit();
- chSysInit();
- dmaInit();
-
- /* This is now the idle thread loop, you may perform here a low priority
- task but you must never try to sleep or wait in this loop. Note that
- this tasks runs at the lowest priority level so any instruction added
- here will be executed after all other tasks have been started.*/
- while (true) {
- }
-}
diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/mcuconf.h b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/mcuconf.h deleted file mode 100644 index 5cacf76..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/mcuconf.h +++ /dev/null @@ -1,62 +0,0 @@ -/*
- ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-#ifndef MCUCONF_H
-#define MCUCONF_H
-
-/*
- * MSP430X drivers configuration.
- * The following settings override the default settings present in
- * the various device driver implementation headers.
- * Note that the settings for each driver only have effect if the driver
- * is enabled in halconf.h.
- *
- */
-
-#define MSP430X_MCUCONF
-
-/* HAL driver system settings */
-#define MSP430X_ACLK_SRC MSP430X_VLOCLK
-#define MSP430X_LFXTCLK_FREQ 0
-#define MSP430X_HFXTCLK_FREQ 0
-#define MSP430X_DCOCLK_FREQ 8000000
-#define MSP430X_MCLK_DIV 1
-#define MSP430X_SMCLK_DIV 32
-
-/*
- * SERIAL driver system settings.
- */
-#define MSP430X_SERIAL_USE_USART0 TRUE
-#define MSP430X_USART0_CLK_SRC MSP430X_SMCLK_SRC
-#define MSP430X_SERIAL_USE_USART1 FALSE
-#define MSP430X_SERIAL_USE_USART2 FALSE
-#define MSP430X_SERIAL_USE_USART3 FALSE
-
-/*
- * ST driver system settings.
- */
-#define MSP430X_ST_CLK_SRC MSP430X_SMCLK_SRC
-#define MSP430X_ST_TIMER_TYPE B
-#define MSP430X_ST_TIMER_INDEX 0
-
-/*
- * SPI driver system settings.
- */
-#define MSP430X_SPI_USE_SPIA1 TRUE
-#define MSP430X_SPI_USE_SPIB0 TRUE
-#define MSP430X_SPI_EXCLUSIVE_DMA TRUE
-
-#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/msp_vectors.c b/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/msp_vectors.c deleted file mode 100644 index 8968fb9..0000000 --- a/ChibiOS_16.1.5/community/testhal/MSP430X/EXP430FR5969/SPI/msp_vectors.c +++ /dev/null @@ -1,316 +0,0 @@ -#include <msp430.h>
-
-__attribute__((interrupt(1)))
-void Vector1(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(2)))
-void Vector2(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(3)))
-void Vector3(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(4)))
-void Vector4(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(5)))
-void Vector5(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(6)))
-void Vector6(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(7)))
-void Vector7(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(8)))
-void Vector8(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(9)))
-void Vector9(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(10)))
-void Vector10(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(11)))
-void Vector11(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(12)))
-void Vector12(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(13)))
-void Vector13(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(14)))
-void Vector14(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(15)))
-void Vector15(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(16)))
-void Vector16(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(17)))
-void Vector17(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(18)))
-void Vector18(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(19)))
-void Vector19(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(20)))
-void Vector20(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(21)))
-void Vector21(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(22)))
-void Vector22(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(23)))
-void Vector23(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(24)))
-void Vector24(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(25)))
-void Vector25(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(26)))
-void Vector26(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(27)))
-void Vector27(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(28)))
-void Vector28(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(29)))
-void Vector29(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(30)))
-void Vector30(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(31)))
-void Vector31(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(32)))
-void Vector32(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(33)))
-void Vector33(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(34)))
-void Vector34(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(35)))
-void Vector35(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(36)))
-void Vector36(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(37)))
-void Vector37(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(38)))
-void Vector38(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(39)))
-void Vector39(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(40)))
-void Vector40(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(41)))
-void Vector41(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(42)))
-void Vector42(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(44)))
-void Vector44(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(45)))
-void Vector45(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(46)))
-void Vector46(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(47)))
-void Vector47(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(48)))
-void Vector48(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(50)))
-void Vector50(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(51)))
-void Vector51(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(53)))
-void Vector53(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(54)))
-void Vector54(void) {
-
- while (1) {
- }
-}
-__attribute__((interrupt(55)))
-void Vector55(void) {
-
- while (1) {
- }
-}
-
-
|