1 files changed, 0 insertions, 136 deletions
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/main.c b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/main.c
deleted file mode 100644
index f4e71c4..0000000
--- a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/main.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "hal.h"
-#include "nil.h"
-#include "ch_test.h"
-
-/*
- * Blinker thread #1.
- */
-static THD_WORKING_AREA(waThread1, 128);
-static THD_FUNCTION(Thread1, arg) {
-
-  (void)arg;
-
-  while (true) {
-    palSetPad(GPIOE, GPIOE_LED3_RED);
-    chThdSleepMilliseconds(125);
-    palClearPad(GPIOE, GPIOE_LED3_RED);
-    chThdSleepMilliseconds(125);
-    palSetPad(GPIOE, GPIOE_LED7_GREEN);
-    chThdSleepMilliseconds(125);
-    palClearPad(GPIOE, GPIOE_LED7_GREEN);
-    chThdSleepMilliseconds(125);
-    palSetPad(GPIOE, GPIOE_LED10_RED);
-    chThdSleepMilliseconds(125);
-    palClearPad(GPIOE, GPIOE_LED10_RED);
-    chThdSleepMilliseconds(125);
-    palSetPad(GPIOE, GPIOE_LED6_GREEN);
-    chThdSleepMilliseconds(125);
-    palClearPad(GPIOE, GPIOE_LED6_GREEN);
-    chThdSleepMilliseconds(125);
-  }
-}
-
-/*
- * Blinker thread #2.
- */
-static THD_WORKING_AREA(waThread2, 128);
-static THD_FUNCTION(Thread2, arg) {
-
-  (void)arg;
-
-  while (true) {
-    chThdSleepMilliseconds(125);
-    palSetPad(GPIOE, GPIOE_LED5_ORANGE);
-    chThdSleepMilliseconds(125);
-    palClearPad(GPIOE, GPIOE_LED5_ORANGE);
-    chThdSleepMilliseconds(125);
-    palSetPad(GPIOE, GPIOE_LED9_BLUE);
-    chThdSleepMilliseconds(125);
-    palClearPad(GPIOE, GPIOE_LED9_BLUE);
-    chThdSleepMilliseconds(125);
-    palSetPad(GPIOE, GPIOE_LED8_ORANGE);
-    chThdSleepMilliseconds(125);
-    palClearPad(GPIOE, GPIOE_LED8_ORANGE);
-    chThdSleepMilliseconds(125);
-    palSetPad(GPIOE, GPIOE_LED4_BLUE);
-    chThdSleepMilliseconds(125);
-    palClearPad(GPIOE, GPIOE_LED4_BLUE);
-  }
-}
-
-/*
- * Tester thread.
- */
-THD_WORKING_AREA(waThread3, 128);
-THD_FUNCTION(Thread3, arg) {
-
-  (void)arg;
-
-  /*
-   * Activates the serial driver 1 using the driver default configuration.
-   * PA9 and PA10 are routed to USART1.
-   */
-  sdStart(&SD1, NULL);
-  palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7));       /* USART1 TX.       */
-  palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7));      /* USART1 RX.       */
-
-  /* Welcome message.*/
-  chnWrite(&SD1, (const uint8_t *)"Hello World!\r\n", 14);
-
-  /* Waiting for button push and activation of the test suite.*/
-  while (true) {
-    if (palReadPad(GPIOA, GPIOA_BUTTON))
-      test_execute((BaseSequentialStream *)&SD1);
-    chThdSleepMilliseconds(500);
-  }
-}
-
-/*
- * Threads static table, one entry per thread. The number of entries must
- * match NIL_CFG_NUM_THREADS.
- */
-THD_TABLE_BEGIN
-  THD_TABLE_ENTRY(waThread1, "blinker1", Thread1, NULL)
-  THD_TABLE_ENTRY(waThread2, "blinker2", Thread2, NULL)
-  THD_TABLE_ENTRY(wa_test_support, "test_support", test_support, (void *)&nil.threads[3])
-  THD_TABLE_ENTRY(waThread3, "tester", Thread3, NULL)
-THD_TABLE_END
-
-/*
- * Application entry point.
- */
-int main(void) {
-
-  /*
-   * System initializations.
-   * - HAL initialization, this also initializes the configured device drivers
-   *   and performs the board-specific initializations.
-   * - Kernel initialization, the main() function becomes a thread and the
-   *   RTOS is active.
-   */
-  halInit();
-  chSysInit();
-
-  /* This is now the idle thread loop, you may perform here a low priority
-     task but you must never try to sleep or wait in this loop. Note that
-     this tasks runs at the lowest priority level so any instruction added
-     here will be executed after all other tasks have been started.*/
-  while (true) {
-  }
-}