590 files changed, 117275 insertions, 0 deletions
diff --git a/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOMEGA/Makefile b/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOMEGA/Makefile
new file mode 100644
index 0000000..48d4714
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOMEGA/Makefile
@@ -0,0 +1,562 @@
+# Hey Emacs, this is a -*- makefile -*-
+#----------------------------------------------------------------------------
+# WinAVR Makefile Template written by Eric B. Weddington, J�rg Wunsch, et al.
+#
+# Released to the Public Domain
+#
+# Additional material for this makefile was written by:
+# Peter Fleury
+# Tim Henigan
+# Colin O'Flynn
+# Reiner Patommel
+# Markus Pfaff
+# Sander Pool
+# Frederik Rouleau
+# Carlos Lamas
+#
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device, using avrdude.
+#                Please customize the avrdude settings below first!
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# MCU name
+MCU = atmega1280
+
+# Processor frequency.
+F_CPU = 16000000
+
+# Output format. (can be srec, ihex, binary)
+FORMAT = ihex
+
+# Target file name (without extension).
+TARGET = nil
+
+# Object files directory
+#     To put object files in current directory, use a dot (.), do NOT make
+#     this an empty or blank macro!
+OBJDIR = .
+
+# Imported source files
+CHIBIOS = ../../..
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/boards/ARDUINO_MEGA/board.mk
+include $(CHIBIOS)/os/hal/ports/AVR/platform.mk
+include $(CHIBIOS)/os/hal/osal/nil/osal.mk
+include $(CHIBIOS)/os/nil/nil.mk
+include $(CHIBIOS)/os/nil/ports/AVR/compilers/GCC/mk/port.mk
+include $(CHIBIOS)/test/nil/test.mk
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC = $(KERNSRC) \
+      $(PORTSRC) \
+      $(OSALSRC) \
+      $(HALSRC) \
+      $(PLATFORMSRC) \
+      $(BOARDSRC) \
+      $(TESTSRC) \
+      main.c
+
+# List C++ source files here. (C dependencies are automatically generated.)
+CPPSRC =
+
+# List Assembler source files here.
+#     Make them always end in a capital .S.  Files ending in a lowercase .s
+#     will not be considered source files but generated files (assembler
+#     output from the compiler), and will be deleted upon "make clean"!
+#     Even though the DOS/Win* filesystem matches both .s and .S the same,
+#     it will preserve the spelling of the filenames, and gcc itself does
+#     care about how the name is spelled on its command-line.
+ASRC =
+
+# Optimization level, can be [0, 1, 2, 3, s].
+#     0 = turn off optimization. s = optimize for size.
+#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+OPT = 2
+
+# Debugging format.
+#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
+#     AVR Studio 4.10 requires dwarf-2.
+#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
+DEBUG = dwarf-2
+
+# List any extra directories to look for include files here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRAINCDIRS = $(PORTINC) $(KERNINC) $(TESTINC) \
+               $(HALINC) $(OSALINC) $(PLATFORMINC) \
+               $(BOARDINC) $(CHIBIOS)/os/various
+
+# Compiler flag to set the C Standard level.
+#     c89   = "ANSI" C
+#     gnu89 = c89 plus GCC extensions
+#     c99   = ISO C99 standard (not yet fully implemented)
+#     gnu99 = c99 plus GCC extensions
+CSTANDARD = -std=gnu11
+
+# Place -D or -U options here for C sources
+CDEFS = -DF_CPU=$(F_CPU)UL
+
+# Place -D or -U options here for ASM sources
+ADEFS = -DF_CPU=$(F_CPU)
+
+# Place -D or -U options here for C++ sources
+CPPDEFS = -DF_CPU=$(F_CPU)UL
+#CPPDEFS += -D__STDC_LIMIT_MACROS
+#CPPDEFS += -D__STDC_CONSTANT_MACROS
+
+#---------------- Compiler Options C ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CFLAGS = -g$(DEBUG)
+CFLAGS += $(CDEFS)
+CFLAGS += -O$(OPT)
+CFLAGS += -funsigned-char
+CFLAGS += -funsigned-bitfields
+CFLAGS += -fpack-struct
+CFLAGS += -fshort-enums
+#CFLAGS += -fno-strict-aliasing
+CFLAGS += -Wall
+CFLAGS += -Wstrict-prototypes
+#CFLAGS += -mshort-calls
+#CFLAGS += -fno-unit-at-a-time
+#CFLAGS += -Wundef
+#CFLAGS += -Wunreachable-code
+#CFLAGS += -Wsign-compare
+CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+CFLAGS += $(CSTANDARD)
+CFLAGS += -mrelax
+CFLAGS += -fdata-sections
+CFLAGS += -ffunction-sections
+
+#---------------- Compiler Options C++ ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CPPFLAGS = -g$(DEBUG)
+CPPFLAGS += $(CPPDEFS)
+CPPFLAGS += -O$(OPT)
+CPPFLAGS += -funsigned-char
+CPPFLAGS += -funsigned-bitfields
+CPPFLAGS += -fpack-struct
+CPPFLAGS += -fshort-enums
+CPPFLAGS += -fno-exceptions
+CPPFLAGS += -Wall
+CFLAGS += -Wundef
+#CPPFLAGS += -mshort-calls
+#CPPFLAGS += -fno-unit-at-a-time
+#CPPFLAGS += -Wstrict-prototypes
+#CPPFLAGS += -Wunreachable-code
+#CPPFLAGS += -Wsign-compare
+CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+#CPPFLAGS += $(CSTANDARD)
+CPPFLAGS += -fdata-sections
+CPPFLAGS += -ffunction-sections
+
+#---------------- Assembler Options ----------------
+#  -Wa,...:   tell GCC to pass this to the assembler.
+#  -adhlns:   create listing
+#  -gstabs:   have the assembler create line number information; note that
+#             for use in COFF files, additional information about filenames
+#             and function names needs to be present in the assembler source
+#             files -- see avr-libc docs [FIXME: not yet described there]
+#  -listing-cont-lines: Sets the maximum number of continuation lines of hex
+#       dump that will be displayed for a given single line of source input.
+ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+
+#---------------- Library Options ----------------
+# Minimalistic printf version
+PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
+
+# Floating point printf version (requires MATH_LIB = -lm below)
+PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
+
+# If this is left blank, then it will use the Standard printf version.
+PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
+
+# Minimalistic scanf version
+SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
+
+# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
+SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
+
+# If this is left blank, then it will use the Standard scanf version.
+SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_FLOAT)
+
+MATH_LIB = -lm
+
+# List any extra directories to look for libraries here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRALIBDIRS =
+
+#---------------- External Memory Options ----------------
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# used for variables (.data/.bss) and heap (malloc()).
+#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# only used for heap (malloc()).
+#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
+
+EXTMEMOPTS =
+
+#---------------- Linker Options ----------------
+#  -Wl,...:     tell GCC to pass this to linker.
+#    -Map:      create map file
+#    --cref:    add cross reference to  map file
+LDFLAGS = -Wl,-Map=$(TARGET).map,--cref,--gc-sections
+LDFLAGS += $(EXTMEMOPTS)
+LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
+LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
+#LDFLAGS += -T linker_script.x
+
+#---------------- Programming Options (avrdude) ----------------
+
+# Programming hardware: alf avr910 avrisp bascom bsd
+# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
+#
+# Type: avrdude -c ?
+# to get a full listing.
+#
+AVRDUDE_PROGRAMMER = arduino
+
+# com1 = serial port. Use lpt1 to connect to parallel port.
+AVRDUDE_PORT = /dev/tty.usbserial-A7004IPU  # programmer connected to serial device
+
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level.  Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+AVRDUDE_FLAGS = -p $(MCU)
+AVRDUDE_FLAGS += -P $(AVRDUDE_PORT)
+AVRDUDE_FLAGS += -b 57600
+AVRDUDE_FLAGS += -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+#---------------- Debugging Options ----------------
+
+# For simulavr only - target MCU frequency.
+DEBUG_MFREQ = $(F_CPU)
+
+# Set the DEBUG_UI to either gdb or insight.
+# DEBUG_UI = gdb
+DEBUG_UI = insight
+
+# Set the debugging back-end to either avarice, simulavr.
+DEBUG_BACKEND = avarice
+#DEBUG_BACKEND = simulavr
+
+# GDB Init Filename.
+GDBINIT_FILE = __avr_gdbinit
+
+# When using avarice settings for the JTAG
+JTAG_DEV = /dev/com1
+
+# Debugging port used to communicate between GDB / avarice / simulavr.
+DEBUG_PORT = 4242
+
+# Debugging host used to communicate between GDB / avarice / simulavr, normally
+#     just set to localhost unless doing some sort of crazy debugging when
+#     avarice is running on a different computer.
+DEBUG_HOST = localhost
+
+#============================================================================
+
+# Define programs and commands.
+SHELL = sh
+CC = avr-gcc
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+SIZE = avr-size
+AR = avr-ar rcs
+NM = avr-nm
+AVRDUDE = avrdude
+REMOVE = rm -f
+REMOVEDIR = rm -rf
+COPY = cp
+WINSHELL = cmd
+
+# Define Messages
+# English
+MSG_ERRORS_NONE = Errors: none
+MSG_BEGIN = -------- begin --------
+MSG_END = --------  end  --------
+MSG_SIZE_BEFORE = Size before:
+MSG_SIZE_AFTER = Size after:
+MSG_COFF = Converting to AVR COFF:
+MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
+MSG_FLASH = Creating load file for Flash:
+MSG_EEPROM = Creating load file for EEPROM:
+MSG_EXTENDED_LISTING = Creating Extended Listing:
+MSG_SYMBOL_TABLE = Creating Symbol Table:
+MSG_LINKING = Linking:
+MSG_COMPILING = Compiling C:
+MSG_COMPILING_CPP = Compiling C++:
+MSG_ASSEMBLING = Assembling:
+MSG_CLEANING = Cleaning project:
+MSG_CREATING_LIBRARY = Creating library:
+
+# Define all object files.
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+
+# Define all listing files.
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+
+# Compiler flags to generate dependency files.
+GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
+
+# Combine all necessary flags and optional flags.
+# Add target processor to flags.
+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
+ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
+
+# Default target.
+all: begin gccversion sizebefore build sizeafter end
+
+# Change the build target to build a HEX file or a library.
+build: elf hex bin eep lss sym
+#build: lib
+
+elf: $(TARGET).elf
+hex: $(TARGET).hex
+bin: $(TARGET).bin
+eep: $(TARGET).eep
+lss: $(TARGET).lss
+sym: $(TARGET).sym
+LIBNAME=lib$(TARGET).a
+lib: $(LIBNAME)
+
+# Eye candy.
+# AVR Studio 3.x does not check make's exit code but relies on
+# the following magic strings to be generated by the compile job.
+begin:
+	@echo
+	@echo $(MSG_BEGIN)
+
+end:
+	@echo $(MSG_END)
+	@echo
+
+# Display size of file.
+HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
+ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
+
+sizebefore:
+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
+	2>/dev/null; echo; fi
+
+sizeafter:
+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
+	2>/dev/null; echo; fi
+
+# Display compiler version information.
+gccversion :
+	@$(CC) --version
+
+# Program the device.
+program: $(TARGET).hex $(TARGET).eep
+	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+# Generate avr-gdb config/init file which does the following:
+#     define the reset signal, load the target file, connect to target, and set
+#     a breakpoint at main().
+gdb-config:
+	@$(REMOVE) $(GDBINIT_FILE)
+	@echo define reset >> $(GDBINIT_FILE)
+	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
+	@echo end >> $(GDBINIT_FILE)
+	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
+	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
+ifeq ($(DEBUG_BACKEND),simulavr)
+	@echo load  >> $(GDBINIT_FILE)
+endif
+	@echo break main >> $(GDBINIT_FILE)
+
+debug: gdb-config $(TARGET).elf
+ifeq ($(DEBUG_BACKEND), avarice)
+	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
+	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
+	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
+	@$(WINSHELL) /c pause
+
+else
+	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
+	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
+endif
+	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT = $(OBJCOPY) --debugging
+COFFCONVERT += --change-section-address .data-0x800000
+COFFCONVERT += --change-section-address .bss-0x800000
+COFFCONVERT += --change-section-address .noinit-0x800000
+COFFCONVERT += --change-section-address .eeprom-0x810000
+
+coff: $(TARGET).elf
+	@echo
+	@echo $(MSG_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
+
+extcoff: $(TARGET).elf
+	@echo
+	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
+
+# Create final output files (.hex, .eep) from ELF output file.
+%.hex: %.elf
+	@echo
+	@echo $(MSG_FLASH) $@
+	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
+
+%.bin: %.elf
+	@echo
+	@echo $(MSG_FLASH) $@
+	$(OBJCOPY) -O binary -R .eeprom $< $@
+
+%.eep: %.elf
+	@echo
+	@echo $(MSG_EEPROM) $@
+	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
+	--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
+
+# Create extended listing file from ELF output file.
+%.lss: %.elf
+	@echo
+	@echo $(MSG_EXTENDED_LISTING) $@
+	$(OBJDUMP) -h -S $< > $@
+
+# Create a symbol table from ELF output file.
+%.sym: %.elf
+	@echo
+	@echo $(MSG_SYMBOL_TABLE) $@
+	$(NM) -n $< > $@
+
+# Create library from object files.
+.SECONDARY : $(TARGET).a
+.PRECIOUS : $(OBJ)
+%.a: $(OBJ)
+	@echo
+	@echo $(MSG_CREATING_LIBRARY) $@
+	$(AR) $@ $(OBJ)
+
+# Link: create ELF output file from object files.
+.SECONDARY : $(TARGET).elf
+.PRECIOUS : $(OBJ)
+%.elf: $(OBJ)
+	@echo
+	@echo $(MSG_LINKING) $@
+	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
+
+# Compile: create object files from C source files.
+$(OBJDIR)/%.o : %.c
+	@echo
+	@echo $(MSG_COMPILING) $<
+	$(CC) -c $(ALL_CFLAGS) $< -o $@
+
+# Compile: create object files from C++ source files.
+$(OBJDIR)/%.o : %.cpp
+	@echo
+	@echo $(MSG_COMPILING_CPP) $<
+	$(CC) -c $(ALL_CPPFLAGS) $< -o $@
+
+# Compile: create assembler files from C source files.
+%.s : %.c
+	$(CC) -S $(ALL_CFLAGS) $< -o $@
+
+# Compile: create assembler files from C++ source files.
+%.s : %.cpp
+	$(CC) -S $(ALL_CPPFLAGS) $< -o $@
+
+# Assemble: create object files from assembler source files.
+$(OBJDIR)/%.o : %.S
+	@echo
+	@echo $(MSG_ASSEMBLING) $<
+	$(CC) -c $(ALL_ASFLAGS) $< -o $@
+
+# Create preprocessed source for use in sending a bug report.
+%.i : %.c
+	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
+
+# Target: clean project.
+clean: begin clean_list end
+
+clean_list :
+	@echo
+	@echo $(MSG_CLEANING)
+	$(REMOVE) $(TARGET).hex
+	$(REMOVE) $(TARGET).bin
+	$(REMOVE) $(TARGET).eep
+	$(REMOVE) $(TARGET).cof
+	$(REMOVE) $(TARGET).elf
+	$(REMOVE) $(TARGET).map
+	$(REMOVE) $(TARGET).sym
+	$(REMOVE) $(TARGET).lss
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
+	$(REMOVE) $(SRC:.c=.s)
+	$(REMOVE) $(SRC:.c=.d)
+	$(REMOVE) $(SRC:.c=.i)
+	$(REMOVEDIR) .dep
+
+# Create object files directory
+$(shell mkdir $(OBJDIR) 2>/dev/null)
+
+# Include the dependency files.
+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+
+# Listing of phony targets.
+.PHONY : all begin finish end sizebefore sizeafter gccversion \
+build elf hex bin eep lss sym coff extcoff \
+clean clean_list program debug gdb-config
diff --git a/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOMEGA/halconf.h b/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOMEGA/halconf.h
new file mode 100644
index 0000000..72c1874
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOMEGA/halconf.h
@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM                  FALSE
+#endif
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOMEGA/main.c b/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOMEGA/main.c
new file mode 100644
index 0000000..f253ea6
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOMEGA/main.c
@@ -0,0 +1,84 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+#include "nil.h"
+
+/*
+ * Thread 1.
+ */
+THD_WORKING_AREA(waThread1, 128);
+THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+
+  while (true) {
+    palTogglePad(IOPORT2, PORTB_LED1);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Thread 2.
+ */
+THD_WORKING_AREA(waThread2, 128);
+THD_FUNCTION(Thread2, arg) {
+
+  (void)arg;
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   * PA9 and PA10 are routed to USART1.
+   */
+  sdStart(&SD1, NULL);
+
+  while (true) {
+    chnWrite(&SD1, (const uint8_t *)"Hello World!\r\n", 14);
+    chThdSleepMilliseconds(2000);
+  }
+}
+
+/*
+ * Threads static table, one entry per thread. The number of entries must
+ * match NIL_CFG_NUM_THREADS.
+ */
+THD_TABLE_BEGIN
+  THD_TABLE_ENTRY(waThread1, "blinker", Thread1, NULL)
+  THD_TABLE_ENTRY(waThread2, "hello", Thread2, NULL)
+THD_TABLE_END
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /* This is now the idle thread loop, you may perform here a low priority
+     task but you must never try to sleep or wait in this loop. Note that
+     this tasks runs at the lowest priority level so any instruction added
+     here will be executed after all other tasks have been started.*/
+  while (true) {
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOMEGA/mcuconf.h b/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOMEGA/mcuconf.h
new file mode 100644
index 0000000..3682828
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOMEGA/mcuconf.h
@@ -0,0 +1,84 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * AVR drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the driver
+ * is enabled in halconf.h.
+ */
+
+/*
+ * ADC driver system settings.
+ */
+#define AVR_ADC_USE_ADC1                   FALSE
+
+/*
+ * CAN driver system settings.
+ */
+
+/*
+ * MAC driver system settings.
+ */
+
+/*
+ * PWM driver system settings.
+ */
+#define AVR_PWM_USE_TIM1                   FALSE
+#define AVR_PWM_USE_TIM2                   FALSE
+#define AVR_PWM_USE_TIM3                   FALSE
+#define AVR_PWM_USE_TIM4                   FALSE
+#define AVR_PWM_USE_TIM5                   FALSE
+
+/*
+ * ICU driver system settings.
+ */
+#define AVR_ICU_USE_TIM1                   FALSE
+#define AVR_ICU_USE_TIM3                   FALSE
+#define AVR_ICU_USE_TIM4                   FALSE
+#define AVR_ICU_USE_TIM5                   FALSE
+
+/*
+ * GPT driver system settings.
+ */
+#define AVR_GPT_USE_TIM1                   FALSE
+#define AVR_GPT_USE_TIM2                   FALSE
+#define AVR_GPT_USE_TIM3                   FALSE
+#define AVR_GPT_USE_TIM4                   FALSE
+#define AVR_GPT_USE_TIM5                   FALSE
+
+/*
+ * SERIAL driver system settings.
+ */
+#define AVR_SERIAL_USE_USART0              TRUE
+#define AVR_SERIAL_USE_USART1              FALSE
+
+/*
+ * I2C driver system settings.
+ */
+#define AVR_I2C_USE_I2C1                   FALSE
+
+/*
+ * SPI driver system settings.
+ */
+#define AVR_SPI_USE_SPI1                   FALSE
+#define AVR_SPI_USE_16BIT_POLLED_EXCHANGE  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOMEGA/nilconf.h b/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOMEGA/nilconf.h
new file mode 100644
index 0000000..7d2f78d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOMEGA/nilconf.h
@@ -0,0 +1,182 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    nilconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _NILCONF_H_
+#define _NILCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of user threads in the application.
+ * @note    This number is not inclusive of the idle thread which is
+ *          Implicitly handled.
+ */
+#define NIL_CFG_NUM_THREADS                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name System timer settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define NIL_CFG_ST_RESOLUTION               16
+
+/**
+ * @brief   System tick frequency.
+ * @note    This value together with the @p NIL_CFG_ST_RESOLUTION
+ *          option defines the maximum amount of time allowed for
+ *          timeouts.
+ * @note    Currently the Timer is configured with a prescaler of
+ *          1024. Arduinos running at 16MHz will have a frequency
+ *          of 16MHz/1024. This will provide a resolution of ~64uS.
+ */
+#define NIL_CFG_ST_FREQUENCY                15624
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define NIL_CFG_ST_TIMEDELTA                2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define NIL_CFG_USE_EVENTS                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System assertions.
+ */
+#define NIL_CFG_ENABLE_ASSERTS              FALSE
+
+/**
+ * @brief   Stack check.
+ */
+#define NIL_CFG_ENABLE_STACK_CHECK          FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System initialization hook.
+ */
+#if !defined(NIL_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__)
+#define NIL_CFG_SYSTEM_INIT_HOOK() {                                        \
+}
+#endif
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define NIL_CFG_THREAD_EXT_FIELDS                                           \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ */
+#define NIL_CFG_THREAD_EXT_INIT_HOOK(tr) {                                  \
+  /* Add custom threads initialization code here.*/                         \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define NIL_CFG_IDLE_ENTER_HOOK() {                                         \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define NIL_CFG_IDLE_LEAVE_HOOK() {                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ */
+#if !defined(NIL_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
+#define NIL_CFG_SYSTEM_HALT_HOOK(reason) {                                  \
+}
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in nilcore.h).   */
+/*===========================================================================*/
+
+#endif  /* _NILCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOUNO/Makefile b/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOUNO/Makefile
new file mode 100644
index 0000000..2d29170
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOUNO/Makefile
@@ -0,0 +1,562 @@
+# Hey Emacs, this is a -*- makefile -*-
+#----------------------------------------------------------------------------
+# WinAVR Makefile Template written by Eric B. Weddington, J�rg Wunsch, et al.
+#
+# Released to the Public Domain
+#
+# Additional material for this makefile was written by:
+# Peter Fleury
+# Tim Henigan
+# Colin O'Flynn
+# Reiner Patommel
+# Markus Pfaff
+# Sander Pool
+# Frederik Rouleau
+# Carlos Lamas
+#
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device, using avrdude.
+#                Please customize the avrdude settings below first!
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# MCU name
+MCU = atmega328p
+
+# Processor frequency.
+F_CPU = 16000000
+
+# Output format. (can be srec, ihex, binary)
+FORMAT = ihex
+
+# Target file name (without extension).
+TARGET = nil
+
+# Object files directory
+#     To put object files in current directory, use a dot (.), do NOT make
+#     this an empty or blank macro!
+OBJDIR = .
+
+# Imported source files
+CHIBIOS = ../../..
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/boards/ARDUINO_UNO/board.mk
+include $(CHIBIOS)/os/hal/ports/AVR/platform.mk
+include $(CHIBIOS)/os/hal/osal/nil/osal.mk
+include $(CHIBIOS)/os/nil/nil.mk
+include $(CHIBIOS)/os/nil/ports/AVR/compilers/GCC/mk/port.mk
+include $(CHIBIOS)/test/nil/test.mk
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC = $(KERNSRC) \
+      $(PORTSRC) \
+      $(OSALSRC) \
+      $(HALSRC) \
+      $(PLATFORMSRC) \
+      $(BOARDSRC) \
+      $(TESTSRC) \
+      main.c
+
+# List C++ source files here. (C dependencies are automatically generated.)
+CPPSRC =
+
+# List Assembler source files here.
+#     Make them always end in a capital .S.  Files ending in a lowercase .s
+#     will not be considered source files but generated files (assembler
+#     output from the compiler), and will be deleted upon "make clean"!
+#     Even though the DOS/Win* filesystem matches both .s and .S the same,
+#     it will preserve the spelling of the filenames, and gcc itself does
+#     care about how the name is spelled on its command-line.
+ASRC =
+
+# Optimization level, can be [0, 1, 2, 3, s].
+#     0 = turn off optimization. s = optimize for size.
+#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+OPT = 2
+
+# Debugging format.
+#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
+#     AVR Studio 4.10 requires dwarf-2.
+#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
+DEBUG = dwarf-2
+
+# List any extra directories to look for include files here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRAINCDIRS = $(PORTINC) $(KERNINC) $(TESTINC) \
+               $(HALINC) $(OSALINC) $(PLATFORMINC) \
+               $(BOARDINC) $(CHIBIOS)/os/various
+
+# Compiler flag to set the C Standard level.
+#     c89   = "ANSI" C
+#     gnu89 = c89 plus GCC extensions
+#     c99   = ISO C99 standard (not yet fully implemented)
+#     gnu99 = c99 plus GCC extensions
+CSTANDARD = -std=gnu11
+
+# Place -D or -U options here for C sources
+CDEFS = -DF_CPU=$(F_CPU)UL
+
+# Place -D or -U options here for ASM sources
+ADEFS = -DF_CPU=$(F_CPU)
+
+# Place -D or -U options here for C++ sources
+CPPDEFS = -DF_CPU=$(F_CPU)UL
+#CPPDEFS += -D__STDC_LIMIT_MACROS
+#CPPDEFS += -D__STDC_CONSTANT_MACROS
+
+#---------------- Compiler Options C ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CFLAGS = -g$(DEBUG)
+CFLAGS += $(CDEFS)
+CFLAGS += -O$(OPT)
+CFLAGS += -funsigned-char
+CFLAGS += -funsigned-bitfields
+CFLAGS += -fpack-struct
+CFLAGS += -fshort-enums
+#CFLAGS += -fno-strict-aliasing
+CFLAGS += -Wall
+CFLAGS += -Wstrict-prototypes
+#CFLAGS += -mshort-calls
+#CFLAGS += -fno-unit-at-a-time
+#CFLAGS += -Wundef
+#CFLAGS += -Wunreachable-code
+#CFLAGS += -Wsign-compare
+CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+CFLAGS += $(CSTANDARD)
+#CFLAGS += -mrelax
+CFLAGS += -fdata-sections
+CFLAGS += -ffunction-sections
+
+#---------------- Compiler Options C++ ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CPPFLAGS = -g$(DEBUG)
+CPPFLAGS += $(CPPDEFS)
+CPPFLAGS += -O$(OPT)
+CPPFLAGS += -funsigned-char
+CPPFLAGS += -funsigned-bitfields
+CPPFLAGS += -fpack-struct
+CPPFLAGS += -fshort-enums
+CPPFLAGS += -fno-exceptions
+CPPFLAGS += -Wall
+CFLAGS += -Wundef
+#CPPFLAGS += -mshort-calls
+#CPPFLAGS += -fno-unit-at-a-time
+#CPPFLAGS += -Wstrict-prototypes
+#CPPFLAGS += -Wunreachable-code
+#CPPFLAGS += -Wsign-compare
+CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+#CPPFLAGS += $(CSTANDARD)
+CPPFLAGS += -fdata-sections
+CPPFLAGS += -ffunction-sections
+
+#---------------- Assembler Options ----------------
+#  -Wa,...:   tell GCC to pass this to the assembler.
+#  -adhlns:   create listing
+#  -gstabs:   have the assembler create line number information; note that
+#             for use in COFF files, additional information about filenames
+#             and function names needs to be present in the assembler source
+#             files -- see avr-libc docs [FIXME: not yet described there]
+#  -listing-cont-lines: Sets the maximum number of continuation lines of hex
+#       dump that will be displayed for a given single line of source input.
+ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+
+#---------------- Library Options ----------------
+# Minimalistic printf version
+PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
+
+# Floating point printf version (requires MATH_LIB = -lm below)
+PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
+
+# If this is left blank, then it will use the Standard printf version.
+PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
+
+# Minimalistic scanf version
+SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
+
+# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
+SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
+
+# If this is left blank, then it will use the Standard scanf version.
+SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_FLOAT)
+
+MATH_LIB = -lm
+
+# List any extra directories to look for libraries here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRALIBDIRS =
+
+#---------------- External Memory Options ----------------
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# used for variables (.data/.bss) and heap (malloc()).
+#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# only used for heap (malloc()).
+#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
+
+EXTMEMOPTS =
+
+#---------------- Linker Options ----------------
+#  -Wl,...:     tell GCC to pass this to linker.
+#    -Map:      create map file
+#    --cref:    add cross reference to  map file
+LDFLAGS = -Wl,-Map=$(TARGET).map,--cref,--gc-sections
+LDFLAGS += $(EXTMEMOPTS)
+LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
+LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
+#LDFLAGS += -T linker_script.x
+
+#---------------- Programming Options (avrdude) ----------------
+
+# Programming hardware: alf avr910 avrisp bascom bsd
+# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
+#
+# Type: avrdude -c ?
+# to get a full listing.
+#
+AVRDUDE_PROGRAMMER = avrisp2
+
+# com1 = serial port. Use lpt1 to connect to parallel port.
+AVRDUDE_PORT = /dev/tty.usbmodem00034091  # programmer connected to serial device
+
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level.  Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+AVRDUDE_FLAGS = -p $(MCU)
+AVRDUDE_FLAGS += -P $(AVRDUDE_PORT)
+AVRDUDE_FLAGS += -b 57600
+AVRDUDE_FLAGS += -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+#---------------- Debugging Options ----------------
+
+# For simulavr only - target MCU frequency.
+DEBUG_MFREQ = $(F_CPU)
+
+# Set the DEBUG_UI to either gdb or insight.
+# DEBUG_UI = gdb
+DEBUG_UI = insight
+
+# Set the debugging back-end to either avarice, simulavr.
+DEBUG_BACKEND = avarice
+#DEBUG_BACKEND = simulavr
+
+# GDB Init Filename.
+GDBINIT_FILE = __avr_gdbinit
+
+# When using avarice settings for the JTAG
+JTAG_DEV = /dev/com1
+
+# Debugging port used to communicate between GDB / avarice / simulavr.
+DEBUG_PORT = 4242
+
+# Debugging host used to communicate between GDB / avarice / simulavr, normally
+#     just set to localhost unless doing some sort of crazy debugging when
+#     avarice is running on a different computer.
+DEBUG_HOST = localhost
+
+#============================================================================
+
+# Define programs and commands.
+SHELL = sh
+CC = avr-gcc
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+SIZE = avr-size
+AR = avr-ar rcs
+NM = avr-nm
+AVRDUDE = avrdude
+REMOVE = rm -f
+REMOVEDIR = rm -rf
+COPY = cp
+WINSHELL = cmd
+
+# Define Messages
+# English
+MSG_ERRORS_NONE = Errors: none
+MSG_BEGIN = -------- begin --------
+MSG_END = --------  end  --------
+MSG_SIZE_BEFORE = Size before:
+MSG_SIZE_AFTER = Size after:
+MSG_COFF = Converting to AVR COFF:
+MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
+MSG_FLASH = Creating load file for Flash:
+MSG_EEPROM = Creating load file for EEPROM:
+MSG_EXTENDED_LISTING = Creating Extended Listing:
+MSG_SYMBOL_TABLE = Creating Symbol Table:
+MSG_LINKING = Linking:
+MSG_COMPILING = Compiling C:
+MSG_COMPILING_CPP = Compiling C++:
+MSG_ASSEMBLING = Assembling:
+MSG_CLEANING = Cleaning project:
+MSG_CREATING_LIBRARY = Creating library:
+
+# Define all object files.
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+
+# Define all listing files.
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+
+# Compiler flags to generate dependency files.
+GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
+
+# Combine all necessary flags and optional flags.
+# Add target processor to flags.
+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
+ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
+
+# Default target.
+all: begin gccversion sizebefore build sizeafter end
+
+# Change the build target to build a HEX file or a library.
+build: elf hex bin eep lss sym
+#build: lib
+
+elf: $(TARGET).elf
+hex: $(TARGET).hex
+bin: $(TARGET).bin
+eep: $(TARGET).eep
+lss: $(TARGET).lss
+sym: $(TARGET).sym
+LIBNAME=lib$(TARGET).a
+lib: $(LIBNAME)
+
+# Eye candy.
+# AVR Studio 3.x does not check make's exit code but relies on
+# the following magic strings to be generated by the compile job.
+begin:
+	@echo
+	@echo $(MSG_BEGIN)
+
+end:
+	@echo $(MSG_END)
+	@echo
+
+# Display size of file.
+HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
+ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
+
+sizebefore:
+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
+	2>/dev/null; echo; fi
+
+sizeafter:
+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
+	2>/dev/null; echo; fi
+
+# Display compiler version information.
+gccversion :
+	@$(CC) --version
+
+# Program the device.
+program: $(TARGET).hex $(TARGET).eep
+	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+# Generate avr-gdb config/init file which does the following:
+#     define the reset signal, load the target file, connect to target, and set
+#     a breakpoint at main().
+gdb-config:
+	@$(REMOVE) $(GDBINIT_FILE)
+	@echo define reset >> $(GDBINIT_FILE)
+	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
+	@echo end >> $(GDBINIT_FILE)
+	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
+	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
+ifeq ($(DEBUG_BACKEND),simulavr)
+	@echo load  >> $(GDBINIT_FILE)
+endif
+	@echo break main >> $(GDBINIT_FILE)
+
+debug: gdb-config $(TARGET).elf
+ifeq ($(DEBUG_BACKEND), avarice)
+	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
+	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
+	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
+	@$(WINSHELL) /c pause
+
+else
+	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
+	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
+endif
+	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT = $(OBJCOPY) --debugging
+COFFCONVERT += --change-section-address .data-0x800000
+COFFCONVERT += --change-section-address .bss-0x800000
+COFFCONVERT += --change-section-address .noinit-0x800000
+COFFCONVERT += --change-section-address .eeprom-0x810000
+
+coff: $(TARGET).elf
+	@echo
+	@echo $(MSG_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
+
+extcoff: $(TARGET).elf
+	@echo
+	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
+
+# Create final output files (.hex, .eep) from ELF output file.
+%.hex: %.elf
+	@echo
+	@echo $(MSG_FLASH) $@
+	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
+
+%.bin: %.elf
+	@echo
+	@echo $(MSG_FLASH) $@
+	$(OBJCOPY) -O binary -R .eeprom $< $@
+
+%.eep: %.elf
+	@echo
+	@echo $(MSG_EEPROM) $@
+	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
+	--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
+
+# Create extended listing file from ELF output file.
+%.lss: %.elf
+	@echo
+	@echo $(MSG_EXTENDED_LISTING) $@
+	$(OBJDUMP) -h -S $< > $@
+
+# Create a symbol table from ELF output file.
+%.sym: %.elf
+	@echo
+	@echo $(MSG_SYMBOL_TABLE) $@
+	$(NM) -n $< > $@
+
+# Create library from object files.
+.SECONDARY : $(TARGET).a
+.PRECIOUS : $(OBJ)
+%.a: $(OBJ)
+	@echo
+	@echo $(MSG_CREATING_LIBRARY) $@
+	$(AR) $@ $(OBJ)
+
+# Link: create ELF output file from object files.
+.SECONDARY : $(TARGET).elf
+.PRECIOUS : $(OBJ)
+%.elf: $(OBJ)
+	@echo
+	@echo $(MSG_LINKING) $@
+	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
+
+# Compile: create object files from C source files.
+$(OBJDIR)/%.o : %.c
+	@echo
+	@echo $(MSG_COMPILING) $<
+	$(CC) -c $(ALL_CFLAGS) $< -o $@
+
+# Compile: create object files from C++ source files.
+$(OBJDIR)/%.o : %.cpp
+	@echo
+	@echo $(MSG_COMPILING_CPP) $<
+	$(CC) -c $(ALL_CPPFLAGS) $< -o $@
+
+# Compile: create assembler files from C source files.
+%.s : %.c
+	$(CC) -S $(ALL_CFLAGS) $< -o $@
+
+# Compile: create assembler files from C++ source files.
+%.s : %.cpp
+	$(CC) -S $(ALL_CPPFLAGS) $< -o $@
+
+# Assemble: create object files from assembler source files.
+$(OBJDIR)/%.o : %.S
+	@echo
+	@echo $(MSG_ASSEMBLING) $<
+	$(CC) -c $(ALL_ASFLAGS) $< -o $@
+
+# Create preprocessed source for use in sending a bug report.
+%.i : %.c
+	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
+
+# Target: clean project.
+clean: begin clean_list end
+
+clean_list :
+	@echo
+	@echo $(MSG_CLEANING)
+	$(REMOVE) $(TARGET).hex
+	$(REMOVE) $(TARGET).bin
+	$(REMOVE) $(TARGET).eep
+	$(REMOVE) $(TARGET).cof
+	$(REMOVE) $(TARGET).elf
+	$(REMOVE) $(TARGET).map
+	$(REMOVE) $(TARGET).sym
+	$(REMOVE) $(TARGET).lss
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
+	$(REMOVE) $(SRC:.c=.s)
+	$(REMOVE) $(SRC:.c=.d)
+	$(REMOVE) $(SRC:.c=.i)
+	$(REMOVEDIR) .dep
+
+# Create object files directory
+$(shell mkdir $(OBJDIR) 2>/dev/null)
+
+# Include the dependency files.
+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+
+# Listing of phony targets.
+.PHONY : all begin finish end sizebefore sizeafter gccversion \
+build elf hex bin eep lss sym coff extcoff \
+clean clean_list program debug gdb-config
diff --git a/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOUNO/halconf.h b/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOUNO/halconf.h
new file mode 100644
index 0000000..72c1874
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOUNO/halconf.h
@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM                  FALSE
+#endif
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOUNO/main.c b/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOUNO/main.c
new file mode 100644
index 0000000..f253ea6
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOUNO/main.c
@@ -0,0 +1,84 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+#include "nil.h"
+
+/*
+ * Thread 1.
+ */
+THD_WORKING_AREA(waThread1, 128);
+THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+
+  while (true) {
+    palTogglePad(IOPORT2, PORTB_LED1);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Thread 2.
+ */
+THD_WORKING_AREA(waThread2, 128);
+THD_FUNCTION(Thread2, arg) {
+
+  (void)arg;
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   * PA9 and PA10 are routed to USART1.
+   */
+  sdStart(&SD1, NULL);
+
+  while (true) {
+    chnWrite(&SD1, (const uint8_t *)"Hello World!\r\n", 14);
+    chThdSleepMilliseconds(2000);
+  }
+}
+
+/*
+ * Threads static table, one entry per thread. The number of entries must
+ * match NIL_CFG_NUM_THREADS.
+ */
+THD_TABLE_BEGIN
+  THD_TABLE_ENTRY(waThread1, "blinker", Thread1, NULL)
+  THD_TABLE_ENTRY(waThread2, "hello", Thread2, NULL)
+THD_TABLE_END
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /* This is now the idle thread loop, you may perform here a low priority
+     task but you must never try to sleep or wait in this loop. Note that
+     this tasks runs at the lowest priority level so any instruction added
+     here will be executed after all other tasks have been started.*/
+  while (true) {
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOUNO/mcuconf.h b/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOUNO/mcuconf.h
new file mode 100644
index 0000000..3682828
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOUNO/mcuconf.h
@@ -0,0 +1,84 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * AVR drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the driver
+ * is enabled in halconf.h.
+ */
+
+/*
+ * ADC driver system settings.
+ */
+#define AVR_ADC_USE_ADC1                   FALSE
+
+/*
+ * CAN driver system settings.
+ */
+
+/*
+ * MAC driver system settings.
+ */
+
+/*
+ * PWM driver system settings.
+ */
+#define AVR_PWM_USE_TIM1                   FALSE
+#define AVR_PWM_USE_TIM2                   FALSE
+#define AVR_PWM_USE_TIM3                   FALSE
+#define AVR_PWM_USE_TIM4                   FALSE
+#define AVR_PWM_USE_TIM5                   FALSE
+
+/*
+ * ICU driver system settings.
+ */
+#define AVR_ICU_USE_TIM1                   FALSE
+#define AVR_ICU_USE_TIM3                   FALSE
+#define AVR_ICU_USE_TIM4                   FALSE
+#define AVR_ICU_USE_TIM5                   FALSE
+
+/*
+ * GPT driver system settings.
+ */
+#define AVR_GPT_USE_TIM1                   FALSE
+#define AVR_GPT_USE_TIM2                   FALSE
+#define AVR_GPT_USE_TIM3                   FALSE
+#define AVR_GPT_USE_TIM4                   FALSE
+#define AVR_GPT_USE_TIM5                   FALSE
+
+/*
+ * SERIAL driver system settings.
+ */
+#define AVR_SERIAL_USE_USART0              TRUE
+#define AVR_SERIAL_USE_USART1              FALSE
+
+/*
+ * I2C driver system settings.
+ */
+#define AVR_I2C_USE_I2C1                   FALSE
+
+/*
+ * SPI driver system settings.
+ */
+#define AVR_SPI_USE_SPI1                   FALSE
+#define AVR_SPI_USE_16BIT_POLLED_EXCHANGE  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOUNO/nilconf.h b/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOUNO/nilconf.h
new file mode 100644
index 0000000..7d2f78d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/NIL-ARDUINOUNO/nilconf.h
@@ -0,0 +1,182 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    nilconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _NILCONF_H_
+#define _NILCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of user threads in the application.
+ * @note    This number is not inclusive of the idle thread which is
+ *          Implicitly handled.
+ */
+#define NIL_CFG_NUM_THREADS                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name System timer settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define NIL_CFG_ST_RESOLUTION               16
+
+/**
+ * @brief   System tick frequency.
+ * @note    This value together with the @p NIL_CFG_ST_RESOLUTION
+ *          option defines the maximum amount of time allowed for
+ *          timeouts.
+ * @note    Currently the Timer is configured with a prescaler of
+ *          1024. Arduinos running at 16MHz will have a frequency
+ *          of 16MHz/1024. This will provide a resolution of ~64uS.
+ */
+#define NIL_CFG_ST_FREQUENCY                15624
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define NIL_CFG_ST_TIMEDELTA                2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define NIL_CFG_USE_EVENTS                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System assertions.
+ */
+#define NIL_CFG_ENABLE_ASSERTS              FALSE
+
+/**
+ * @brief   Stack check.
+ */
+#define NIL_CFG_ENABLE_STACK_CHECK          FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System initialization hook.
+ */
+#if !defined(NIL_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__)
+#define NIL_CFG_SYSTEM_INIT_HOOK() {                                        \
+}
+#endif
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define NIL_CFG_THREAD_EXT_FIELDS                                           \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ */
+#define NIL_CFG_THREAD_EXT_INIT_HOOK(tr) {                                  \
+  /* Add custom threads initialization code here.*/                         \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define NIL_CFG_IDLE_ENTER_HOOK() {                                         \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define NIL_CFG_IDLE_LEAVE_HOOK() {                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ */
+#if !defined(NIL_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
+#define NIL_CFG_SYSTEM_HALT_HOOK(reason) {                                  \
+}
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in nilcore.h).   */
+/*===========================================================================*/
+
+#endif  /* _NILCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOMEGA/Makefile b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOMEGA/Makefile
new file mode 100644
index 0000000..0426c3a
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOMEGA/Makefile
@@ -0,0 +1,563 @@
+# Hey Emacs, this is a -*- makefile -*-
+#----------------------------------------------------------------------------
+# WinAVR Makefile Template written by Eric B. Weddington, J�rg Wunsch, et al.
+#
+# Released to the Public Domain
+#
+# Additional material for this makefile was written by:
+# Peter Fleury
+# Tim Henigan
+# Colin O'Flynn
+# Reiner Patommel
+# Markus Pfaff
+# Sander Pool
+# Frederik Rouleau
+# Carlos Lamas
+#
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device, using avrdude.
+#                Please customize the avrdude settings below first!
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# MCU name
+MCU = atmega1280
+
+# Processor frequency.
+F_CPU = 16000000
+
+# Output format. (can be srec, ihex, binary)
+FORMAT = ihex
+
+# Target file name (without extension).
+TARGET = ch
+
+# Object files directory
+#     To put object files in current directory, use a dot (.), do NOT make
+#     this an empty or blank macro!
+OBJDIR = .
+
+# Imported source files
+CHIBIOS = ../../..
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/boards/ARDUINO_MEGA/board.mk
+include $(CHIBIOS)/os/hal/ports/AVR/platform.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/AVR/compilers/GCC/mk/port.mk
+include $(CHIBIOS)/test/rt/test.mk
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC = $(KERNSRC) \
+      $(PORTSRC) \
+      $(OSALSRC) \
+      $(HALSRC) \
+      $(PLATFORMSRC) \
+      $(BOARDSRC) \
+      $(TESTSRC) \
+      $(CHIBIOS)/os/various/evtimer.c \
+      main.c
+
+# List C++ source files here. (C dependencies are automatically generated.)
+CPPSRC =
+
+# List Assembler source files here.
+#     Make them always end in a capital .S.  Files ending in a lowercase .s
+#     will not be considered source files but generated files (assembler
+#     output from the compiler), and will be deleted upon "make clean"!
+#     Even though the DOS/Win* filesystem matches both .s and .S the same,
+#     it will preserve the spelling of the filenames, and gcc itself does
+#     care about how the name is spelled on its command-line.
+ASRC =
+
+# Optimization level, can be [0, 1, 2, 3, s].
+#     0 = turn off optimization. s = optimize for size.
+#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+OPT = 2
+
+# Debugging format.
+#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
+#     AVR Studio 4.10 requires dwarf-2.
+#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
+DEBUG = dwarf-2
+
+# List any extra directories to look for include files here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRAINCDIRS = $(PORTINC) $(KERNINC) $(TESTINC) \
+               $(HALINC) $(OSALINC) $(PLATFORMINC) \
+               $(BOARDINC) $(CHIBIOS)/os/various
+
+# Compiler flag to set the C Standard level.
+#     c89   = "ANSI" C
+#     gnu89 = c89 plus GCC extensions
+#     c99   = ISO C99 standard (not yet fully implemented)
+#     gnu99 = c99 plus GCC extensions
+CSTANDARD = -std=gnu11
+
+# Place -D or -U options here for C sources
+CDEFS = -DF_CPU=$(F_CPU)UL
+
+# Place -D or -U options here for ASM sources
+ADEFS = -DF_CPU=$(F_CPU)
+
+# Place -D or -U options here for C++ sources
+CPPDEFS = -DF_CPU=$(F_CPU)UL
+#CPPDEFS += -D__STDC_LIMIT_MACROS
+#CPPDEFS += -D__STDC_CONSTANT_MACROS
+
+#---------------- Compiler Options C ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CFLAGS = -g$(DEBUG)
+CFLAGS += $(CDEFS)
+CFLAGS += -O$(OPT)
+CFLAGS += -funsigned-char
+CFLAGS += -funsigned-bitfields
+CFLAGS += -fpack-struct
+CFLAGS += -fshort-enums
+#CFLAGS += -fno-strict-aliasing
+CFLAGS += -Wall
+CFLAGS += -Wstrict-prototypes
+#CFLAGS += -mshort-calls
+#CFLAGS += -fno-unit-at-a-time
+#CFLAGS += -Wundef
+#CFLAGS += -Wunreachable-code
+#CFLAGS += -Wsign-compare
+CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+CFLAGS += $(CSTANDARD)
+CFLAGS += -mrelax
+CFLAGS += -fdata-sections
+CFLAGS += -ffunction-sections
+
+#---------------- Compiler Options C++ ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CPPFLAGS = -g$(DEBUG)
+CPPFLAGS += $(CPPDEFS)
+CPPFLAGS += -O$(OPT)
+CPPFLAGS += -funsigned-char
+CPPFLAGS += -funsigned-bitfields
+CPPFLAGS += -fpack-struct
+CPPFLAGS += -fshort-enums
+CPPFLAGS += -fno-exceptions
+CPPFLAGS += -Wall
+CFLAGS += -Wundef
+#CPPFLAGS += -mshort-calls
+#CPPFLAGS += -fno-unit-at-a-time
+#CPPFLAGS += -Wstrict-prototypes
+#CPPFLAGS += -Wunreachable-code
+#CPPFLAGS += -Wsign-compare
+CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+#CPPFLAGS += $(CSTANDARD)
+CPPFLAGS += -fdata-sections
+CPPFLAGS += -ffunction-sections
+
+#---------------- Assembler Options ----------------
+#  -Wa,...:   tell GCC to pass this to the assembler.
+#  -adhlns:   create listing
+#  -gstabs:   have the assembler create line number information; note that
+#             for use in COFF files, additional information about filenames
+#             and function names needs to be present in the assembler source
+#             files -- see avr-libc docs [FIXME: not yet described there]
+#  -listing-cont-lines: Sets the maximum number of continuation lines of hex
+#       dump that will be displayed for a given single line of source input.
+ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+
+#---------------- Library Options ----------------
+# Minimalistic printf version
+PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
+
+# Floating point printf version (requires MATH_LIB = -lm below)
+PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
+
+# If this is left blank, then it will use the Standard printf version.
+PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
+
+# Minimalistic scanf version
+SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
+
+# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
+SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
+
+# If this is left blank, then it will use the Standard scanf version.
+SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_FLOAT)
+
+MATH_LIB = -lm
+
+# List any extra directories to look for libraries here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRALIBDIRS =
+
+#---------------- External Memory Options ----------------
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# used for variables (.data/.bss) and heap (malloc()).
+#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# only used for heap (malloc()).
+#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
+
+EXTMEMOPTS =
+
+#---------------- Linker Options ----------------
+#  -Wl,...:     tell GCC to pass this to linker.
+#    -Map:      create map file
+#    --cref:    add cross reference to  map file
+LDFLAGS = -Wl,-Map=$(TARGET).map,--cref,--gc-sections
+LDFLAGS += $(EXTMEMOPTS)
+LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
+LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
+#LDFLAGS += -T linker_script.x
+
+#---------------- Programming Options (avrdude) ----------------
+
+# Programming hardware: alf avr910 avrisp bascom bsd
+# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
+#
+# Type: avrdude -c ?
+# to get a full listing.
+#
+AVRDUDE_PROGRAMMER = arduino
+
+# com1 = serial port. Use lpt1 to connect to parallel port.
+AVRDUDE_PORT = /dev/tty.usbserial-A7004IPU
+
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level.  Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+AVRDUDE_FLAGS = -p $(MCU)
+AVRDUDE_FLAGS += -P $(AVRDUDE_PORT)
+AVRDUDE_FLAGS += -b 57600
+AVRDUDE_FLAGS += -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+#---------------- Debugging Options ----------------
+
+# For simulavr only - target MCU frequency.
+DEBUG_MFREQ = $(F_CPU)
+
+# Set the DEBUG_UI to either gdb or insight.
+# DEBUG_UI = gdb
+DEBUG_UI = insight
+
+# Set the debugging back-end to either avarice, simulavr.
+DEBUG_BACKEND = avarice
+#DEBUG_BACKEND = simulavr
+
+# GDB Init Filename.
+GDBINIT_FILE = __avr_gdbinit
+
+# When using avarice settings for the JTAG
+JTAG_DEV = /dev/com1
+
+# Debugging port used to communicate between GDB / avarice / simulavr.
+DEBUG_PORT = 4242
+
+# Debugging host used to communicate between GDB / avarice / simulavr, normally
+#     just set to localhost unless doing some sort of crazy debugging when
+#     avarice is running on a different computer.
+DEBUG_HOST = localhost
+
+#============================================================================
+
+# Define programs and commands.
+SHELL = sh
+CC = avr-gcc
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+SIZE = avr-size
+AR = avr-ar rcs
+NM = avr-nm
+AVRDUDE = avrdude
+REMOVE = rm -f
+REMOVEDIR = rm -rf
+COPY = cp
+WINSHELL = cmd
+
+# Define Messages
+# English
+MSG_ERRORS_NONE = Errors: none
+MSG_BEGIN = -------- begin --------
+MSG_END = --------  end  --------
+MSG_SIZE_BEFORE = Size before:
+MSG_SIZE_AFTER = Size after:
+MSG_COFF = Converting to AVR COFF:
+MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
+MSG_FLASH = Creating load file for Flash:
+MSG_EEPROM = Creating load file for EEPROM:
+MSG_EXTENDED_LISTING = Creating Extended Listing:
+MSG_SYMBOL_TABLE = Creating Symbol Table:
+MSG_LINKING = Linking:
+MSG_COMPILING = Compiling C:
+MSG_COMPILING_CPP = Compiling C++:
+MSG_ASSEMBLING = Assembling:
+MSG_CLEANING = Cleaning project:
+MSG_CREATING_LIBRARY = Creating library:
+
+# Define all object files.
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+
+# Define all listing files.
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+
+# Compiler flags to generate dependency files.
+GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
+
+# Combine all necessary flags and optional flags.
+# Add target processor to flags.
+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
+ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
+
+# Default target.
+all: begin gccversion sizebefore build sizeafter end
+
+# Change the build target to build a HEX file or a library.
+build: elf hex bin eep lss sym
+#build: lib
+
+elf: $(TARGET).elf
+hex: $(TARGET).hex
+bin: $(TARGET).bin
+eep: $(TARGET).eep
+lss: $(TARGET).lss
+sym: $(TARGET).sym
+LIBNAME=lib$(TARGET).a
+lib: $(LIBNAME)
+
+# Eye candy.
+# AVR Studio 3.x does not check make's exit code but relies on
+# the following magic strings to be generated by the compile job.
+begin:
+	@echo
+	@echo $(MSG_BEGIN)
+
+end:
+	@echo $(MSG_END)
+	@echo
+
+# Display size of file.
+HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
+ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
+
+sizebefore:
+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
+	2>/dev/null; echo; fi
+
+sizeafter:
+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
+	2>/dev/null; echo; fi
+
+# Display compiler version information.
+gccversion :
+	@$(CC) --version
+
+# Program the device.
+program: $(TARGET).hex $(TARGET).eep
+	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+# Generate avr-gdb config/init file which does the following:
+#     define the reset signal, load the target file, connect to target, and set
+#     a breakpoint at main().
+gdb-config:
+	@$(REMOVE) $(GDBINIT_FILE)
+	@echo define reset >> $(GDBINIT_FILE)
+	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
+	@echo end >> $(GDBINIT_FILE)
+	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
+	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
+ifeq ($(DEBUG_BACKEND),simulavr)
+	@echo load  >> $(GDBINIT_FILE)
+endif
+	@echo break main >> $(GDBINIT_FILE)
+
+debug: gdb-config $(TARGET).elf
+ifeq ($(DEBUG_BACKEND), avarice)
+	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
+	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
+	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
+	@$(WINSHELL) /c pause
+
+else
+	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
+	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
+endif
+	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT = $(OBJCOPY) --debugging
+COFFCONVERT += --change-section-address .data-0x800000
+COFFCONVERT += --change-section-address .bss-0x800000
+COFFCONVERT += --change-section-address .noinit-0x800000
+COFFCONVERT += --change-section-address .eeprom-0x810000
+
+coff: $(TARGET).elf
+	@echo
+	@echo $(MSG_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
+
+extcoff: $(TARGET).elf
+	@echo
+	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
+
+# Create final output files (.hex, .eep) from ELF output file.
+%.hex: %.elf
+	@echo
+	@echo $(MSG_FLASH) $@
+	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
+
+%.bin: %.elf
+	@echo
+	@echo $(MSG_FLASH) $@
+	$(OBJCOPY) -O binary -R .eeprom $< $@
+
+%.eep: %.elf
+	@echo
+	@echo $(MSG_EEPROM) $@
+	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
+	--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
+
+# Create extended listing file from ELF output file.
+%.lss: %.elf
+	@echo
+	@echo $(MSG_EXTENDED_LISTING) $@
+	$(OBJDUMP) -h -S $< > $@
+
+# Create a symbol table from ELF output file.
+%.sym: %.elf
+	@echo
+	@echo $(MSG_SYMBOL_TABLE) $@
+	$(NM) -n $< > $@
+
+# Create library from object files.
+.SECONDARY : $(TARGET).a
+.PRECIOUS : $(OBJ)
+%.a: $(OBJ)
+	@echo
+	@echo $(MSG_CREATING_LIBRARY) $@
+	$(AR) $@ $(OBJ)
+
+# Link: create ELF output file from object files.
+.SECONDARY : $(TARGET).elf
+.PRECIOUS : $(OBJ)
+%.elf: $(OBJ)
+	@echo
+	@echo $(MSG_LINKING) $@
+	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
+
+# Compile: create object files from C source files.
+$(OBJDIR)/%.o : %.c
+	@echo
+	@echo $(MSG_COMPILING) $<
+	$(CC) -c $(ALL_CFLAGS) $< -o $@
+
+# Compile: create object files from C++ source files.
+$(OBJDIR)/%.o : %.cpp
+	@echo
+	@echo $(MSG_COMPILING_CPP) $<
+	$(CC) -c $(ALL_CPPFLAGS) $< -o $@
+
+# Compile: create assembler files from C source files.
+%.s : %.c
+	$(CC) -S $(ALL_CFLAGS) $< -o $@
+
+# Compile: create assembler files from C++ source files.
+%.s : %.cpp
+	$(CC) -S $(ALL_CPPFLAGS) $< -o $@
+
+# Assemble: create object files from assembler source files.
+$(OBJDIR)/%.o : %.S
+	@echo
+	@echo $(MSG_ASSEMBLING) $<
+	$(CC) -c $(ALL_ASFLAGS) $< -o $@
+
+# Create preprocessed source for use in sending a bug report.
+%.i : %.c
+	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
+
+# Target: clean project.
+clean: begin clean_list end
+
+clean_list :
+	@echo
+	@echo $(MSG_CLEANING)
+	$(REMOVE) $(TARGET).hex
+	$(REMOVE) $(TARGET).bin
+	$(REMOVE) $(TARGET).eep
+	$(REMOVE) $(TARGET).cof
+	$(REMOVE) $(TARGET).elf
+	$(REMOVE) $(TARGET).map
+	$(REMOVE) $(TARGET).sym
+	$(REMOVE) $(TARGET).lss
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
+	$(REMOVE) $(SRC:.c=.s)
+	$(REMOVE) $(SRC:.c=.d)
+	$(REMOVE) $(SRC:.c=.i)
+	$(REMOVEDIR) .dep
+
+# Create object files directory
+$(shell mkdir $(OBJDIR) 2>/dev/null)
+
+# Include the dependency files.
+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+
+# Listing of phony targets.
+.PHONY : all begin finish end sizebefore sizeafter gccversion \
+build elf hex bin eep lss sym coff extcoff \
+clean clean_list program debug gdb-config
diff --git a/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOMEGA/chconf.h b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOMEGA/chconf.h
new file mode 100644
index 0000000..6afe4ab
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOMEGA/chconf.h
@@ -0,0 +1,506 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                16
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 15624
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ *
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 128
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread automatically. The application has
+ *          then the responsibility to do one of the following:
+ *          - Spawn a custom idle thread at priority @p IDLEPRIO.
+ *          - Change the main() thread priority to @p IDLEPRIO then enter
+ *            an endless loop. In this scenario the @p main() thread acts as
+ *            the idle thread.
+ *          .
+ * @note    Unless an idle thread is spawned the @p main() thread must not
+ *          enter a sleep state.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Atomic semaphore API.
+ * @details If enabled then the semaphores the @p chSemSignalWait() API
+ *          is included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_USE_SEMSW                        TRUE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  FALSE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     FALSE
+
+/**
+ * @brief   C-runtime allocator.
+ * @details If enabled the the heap allocator APIs just wrap the C-runtime
+ *          @p malloc() and @p free() functions.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_HEAP.
+ * @note    The C-runtime may or may not require @p CH_CFG_USE_MEMCORE, see the
+ *          appropriate documentation.
+ */
+#define CH_CFG_USE_MALLOC_HEAP              FALSE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p Thread structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p TRUE.
+ * @note    This debug option is defaulted to TRUE because it is required by
+ *          some test cases into the test suite.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p Thread structure.
+ */
+#define THREAD_EXT_FIELDS                                                   \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define THREAD_EXT_INIT_HOOK(tp) {                                          \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define THREAD_EXT_EXIT_HOOK(tp) {                                          \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define SYSTEM_TICK_EVENT_HOOK() {                                          \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define SYSTEM_HALT_HOOK() {                                                \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOMEGA/halconf.h b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOMEGA/halconf.h
new file mode 100644
index 0000000..72c1874
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOMEGA/halconf.h
@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM                  FALSE
+#endif
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOMEGA/main.c b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOMEGA/main.c
new file mode 100644
index 0000000..85122b3
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOMEGA/main.c
@@ -0,0 +1,63 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+static WORKING_AREA(waThread1, 32);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("Blinker");
+  while (true) {
+    palTogglePad(IOPORT2, PORTB_LED1);
+    chThdSleepMilliseconds(1000);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  palClearPad(IOPORT2, PORTB_LED1);
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   */
+  sdStart(&SD1, NULL);
+
+  /*
+   * Starts the LED blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  TestThread(&SD1);
+  while(TRUE) {
+    chThdSleepMilliseconds(1000);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOMEGA/mcuconf.h b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOMEGA/mcuconf.h
new file mode 100644
index 0000000..3682828
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOMEGA/mcuconf.h
@@ -0,0 +1,84 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * AVR drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the driver
+ * is enabled in halconf.h.
+ */
+
+/*
+ * ADC driver system settings.
+ */
+#define AVR_ADC_USE_ADC1                   FALSE
+
+/*
+ * CAN driver system settings.
+ */
+
+/*
+ * MAC driver system settings.
+ */
+
+/*
+ * PWM driver system settings.
+ */
+#define AVR_PWM_USE_TIM1                   FALSE
+#define AVR_PWM_USE_TIM2                   FALSE
+#define AVR_PWM_USE_TIM3                   FALSE
+#define AVR_PWM_USE_TIM4                   FALSE
+#define AVR_PWM_USE_TIM5                   FALSE
+
+/*
+ * ICU driver system settings.
+ */
+#define AVR_ICU_USE_TIM1                   FALSE
+#define AVR_ICU_USE_TIM3                   FALSE
+#define AVR_ICU_USE_TIM4                   FALSE
+#define AVR_ICU_USE_TIM5                   FALSE
+
+/*
+ * GPT driver system settings.
+ */
+#define AVR_GPT_USE_TIM1                   FALSE
+#define AVR_GPT_USE_TIM2                   FALSE
+#define AVR_GPT_USE_TIM3                   FALSE
+#define AVR_GPT_USE_TIM4                   FALSE
+#define AVR_GPT_USE_TIM5                   FALSE
+
+/*
+ * SERIAL driver system settings.
+ */
+#define AVR_SERIAL_USE_USART0              TRUE
+#define AVR_SERIAL_USE_USART1              FALSE
+
+/*
+ * I2C driver system settings.
+ */
+#define AVR_I2C_USE_I2C1                   FALSE
+
+/*
+ * SPI driver system settings.
+ */
+#define AVR_SPI_USE_SPI1                   FALSE
+#define AVR_SPI_USE_16BIT_POLLED_EXCHANGE  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOMEGA/readme.txt b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOMEGA/readme.txt
new file mode 100644
index 0000000..2a1524d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOMEGA/readme.txt
@@ -0,0 +1,22 @@
+*****************************************************************************
+** ChibiOS/RT port for Atmel AVR ATmega1280.                                **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an Arduino Mega board.
+
+** The Demo **
+
+The demo currently just prints the TestThread output on Serial0, which is
+available on the board USB connector (FT232 converter), and toggles the LED
+on PB7 (pin 13 on Arduino IDE) every second.
+
+** Build Procedure **
+
+The demo was built using the GCC AVR toolchain. It should build with WinAVR too!
+
+** Notes **
+
+This demo runs natively so the Arduino bootloader must be removed and the FUSEs
+reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.
diff --git a/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/Makefile b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/Makefile
new file mode 100644
index 0000000..95d2db1
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/Makefile
@@ -0,0 +1,562 @@
+# Hey Emacs, this is a -*- makefile -*-
+#----------------------------------------------------------------------------
+# WinAVR Makefile Template written by Eric B. Weddington, J�rg Wunsch, et al.
+#
+# Released to the Public Domain
+#
+# Additional material for this makefile was written by:
+# Peter Fleury
+# Tim Henigan
+# Colin O'Flynn
+# Reiner Patommel
+# Markus Pfaff
+# Sander Pool
+# Frederik Rouleau
+# Carlos Lamas
+#
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device, using avrdude.
+#                Please customize the avrdude settings below first!
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+#              with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+#                   bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# MCU name
+MCU = atmega328p
+
+# Processor frequency.
+F_CPU = 16000000
+
+# Output format. (can be srec, ihex, binary)
+FORMAT = ihex
+
+# Target file name (without extension).
+TARGET = ch
+
+# Object files directory
+#     To put object files in current directory, use a dot (.), do NOT make
+#     this an empty or blank macro!
+OBJDIR = .
+
+# Imported source files
+CHIBIOS = ../../..
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/boards/ARDUINO_UNO/board.mk
+include $(CHIBIOS)/os/hal/ports/AVR/platform.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/AVR/compilers/GCC/mk/port.mk
+#include $(CHIBIOS)/test/rt/test.mk
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC = $(KERNSRC) \
+      $(PORTSRC) \
+      $(OSALSRC) \
+      $(HALSRC) \
+      $(PLATFORMSRC) \
+      $(BOARDSRC) \
+      $(CHIBIOS)/os/various/evtimer.c \
+      main.c
+
+# List C++ source files here. (C dependencies are automatically generated.)
+CPPSRC =
+
+# List Assembler source files here.
+#     Make them always end in a capital .S.  Files ending in a lowercase .s
+#     will not be considered source files but generated files (assembler
+#     output from the compiler), and will be deleted upon "make clean"!
+#     Even though the DOS/Win* filesystem matches both .s and .S the same,
+#     it will preserve the spelling of the filenames, and gcc itself does
+#     care about how the name is spelled on its command-line.
+ASRC =
+
+# Optimization level, can be [0, 1, 2, 3, s].
+#     0 = turn off optimization. s = optimize for size.
+#     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
+OPT = 2
+
+# Debugging format.
+#     Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs.
+#     AVR Studio 4.10 requires dwarf-2.
+#     AVR [Extended] COFF format requires stabs, plus an avr-objcopy run.
+DEBUG = dwarf-2
+
+# List any extra directories to look for include files here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRAINCDIRS = $(PORTINC) $(KERNINC) $(TESTINC) \
+               $(HALINC) $(OSALINC) $(PLATFORMINC) \
+               $(BOARDINC) $(CHIBIOS)/os/various
+
+# Compiler flag to set the C Standard level.
+#     c89   = "ANSI" C
+#     gnu89 = c89 plus GCC extensions
+#     c99   = ISO C99 standard (not yet fully implemented)
+#     gnu99 = c99 plus GCC extensions
+CSTANDARD = -std=gnu11
+
+# Place -D or -U options here for C sources
+CDEFS = -DF_CPU=$(F_CPU)UL
+
+# Place -D or -U options here for ASM sources
+ADEFS = -DF_CPU=$(F_CPU)
+
+# Place -D or -U options here for C++ sources
+CPPDEFS = -DF_CPU=$(F_CPU)UL
+#CPPDEFS += -D__STDC_LIMIT_MACROS
+#CPPDEFS += -D__STDC_CONSTANT_MACROS
+
+#---------------- Compiler Options C ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CFLAGS = -g$(DEBUG)
+CFLAGS += $(CDEFS)
+CFLAGS += -O$(OPT)
+CFLAGS += -funsigned-char
+CFLAGS += -funsigned-bitfields
+CFLAGS += -fpack-struct
+CFLAGS += -fshort-enums
+#CFLAGS += -fno-strict-aliasing
+CFLAGS += -Wall
+CFLAGS += -Wstrict-prototypes
+#CFLAGS += -mshort-calls
+#CFLAGS += -fno-unit-at-a-time
+#CFLAGS += -Wundef
+#CFLAGS += -Wunreachable-code
+#CFLAGS += -Wsign-compare
+CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
+CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+CFLAGS += $(CSTANDARD)
+#CFLAGS += -mrelax
+CFLAGS += -fdata-sections
+CFLAGS += -ffunction-sections
+
+#---------------- Compiler Options C++ ----------------
+#  -g*:          generate debugging information
+#  -O*:          optimization level
+#  -f...:        tuning, see GCC manual and avr-libc documentation
+#  -Wall...:     warning level
+#  -Wa,...:      tell GCC to pass this to the assembler.
+#    -adhlns...: create assembler listing
+CPPFLAGS = -g$(DEBUG)
+CPPFLAGS += $(CPPDEFS)
+CPPFLAGS += -O$(OPT)
+CPPFLAGS += -funsigned-char
+CPPFLAGS += -funsigned-bitfields
+CPPFLAGS += -fpack-struct
+CPPFLAGS += -fshort-enums
+CPPFLAGS += -fno-exceptions
+CPPFLAGS += -Wall
+CFLAGS += -Wundef
+#CPPFLAGS += -mshort-calls
+#CPPFLAGS += -fno-unit-at-a-time
+#CPPFLAGS += -Wstrict-prototypes
+#CPPFLAGS += -Wunreachable-code
+#CPPFLAGS += -Wsign-compare
+CPPFLAGS += -Wa,-adhlns=$(<:%.cpp=$(OBJDIR)/%.lst)
+CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
+#CPPFLAGS += $(CSTANDARD)
+CPPFLAGS += -fdata-sections
+CPPFLAGS += -ffunction-sections
+
+#---------------- Assembler Options ----------------
+#  -Wa,...:   tell GCC to pass this to the assembler.
+#  -adhlns:   create listing
+#  -gstabs:   have the assembler create line number information; note that
+#             for use in COFF files, additional information about filenames
+#             and function names needs to be present in the assembler source
+#             files -- see avr-libc docs [FIXME: not yet described there]
+#  -listing-cont-lines: Sets the maximum number of continuation lines of hex
+#       dump that will be displayed for a given single line of source input.
+ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
+
+#---------------- Library Options ----------------
+# Minimalistic printf version
+PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
+
+# Floating point printf version (requires MATH_LIB = -lm below)
+PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
+
+# If this is left blank, then it will use the Standard printf version.
+PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_MIN)
+#PRINTF_LIB = $(PRINTF_LIB_FLOAT)
+
+# Minimalistic scanf version
+SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
+
+# Floating point + %[ scanf version (requires MATH_LIB = -lm below)
+SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
+
+# If this is left blank, then it will use the Standard scanf version.
+SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_MIN)
+#SCANF_LIB = $(SCANF_LIB_FLOAT)
+
+MATH_LIB = -lm
+
+# List any extra directories to look for libraries here.
+#     Each directory must be seperated by a space.
+#     Use forward slashes for directory separators.
+#     For a directory that has spaces, enclose it in quotes.
+EXTRALIBDIRS =
+
+#---------------- External Memory Options ----------------
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# used for variables (.data/.bss) and heap (malloc()).
+#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff
+
+# 64 KB of external RAM, starting after internal RAM (ATmega128!),
+# only used for heap (malloc()).
+#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff
+
+EXTMEMOPTS =
+
+#---------------- Linker Options ----------------
+#  -Wl,...:     tell GCC to pass this to linker.
+#    -Map:      create map file
+#    --cref:    add cross reference to  map file
+LDFLAGS = -Wl,-Map=$(TARGET).map,--cref,--gc-sections
+LDFLAGS += $(EXTMEMOPTS)
+LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
+LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
+#LDFLAGS += -T linker_script.x
+
+#---------------- Programming Options (avrdude) ----------------
+
+# Programming hardware: alf avr910 avrisp bascom bsd
+# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
+#
+# Type: avrdude -c ?
+# to get a full listing.
+#
+AVRDUDE_PROGRAMMER = avrisp2 
+
+# com1 = serial port. Use lpt1 to connect to parallel port.
+AVRDUDE_PORT = /dev/tty.usbmodem00034091
+
+AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
+#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
+
+# Uncomment the following if you want avrdude's erase cycle counter.
+# Note that this counter needs to be initialized first using -Yn,
+# see avrdude manual.
+#AVRDUDE_ERASE_COUNTER = -y
+
+# Uncomment the following if you do /not/ wish a verification to be
+# performed after programming the device.
+#AVRDUDE_NO_VERIFY = -V
+
+# Increase verbosity level.  Please use this when submitting bug
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
+# to submit bug reports.
+#AVRDUDE_VERBOSE = -v -v
+
+AVRDUDE_FLAGS = -p $(MCU)
+AVRDUDE_FLAGS += -P $(AVRDUDE_PORT)
+AVRDUDE_FLAGS += -b 57600
+AVRDUDE_FLAGS += -c $(AVRDUDE_PROGRAMMER)
+AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
+AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
+AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
+
+#---------------- Debugging Options ----------------
+
+# For simulavr only - target MCU frequency.
+DEBUG_MFREQ = $(F_CPU)
+
+# Set the DEBUG_UI to either gdb or insight.
+# DEBUG_UI = gdb
+DEBUG_UI = insight
+
+# Set the debugging back-end to either avarice, simulavr.
+DEBUG_BACKEND = avarice
+#DEBUG_BACKEND = simulavr
+
+# GDB Init Filename.
+GDBINIT_FILE = __avr_gdbinit
+
+# When using avarice settings for the JTAG
+JTAG_DEV = /dev/com1
+
+# Debugging port used to communicate between GDB / avarice / simulavr.
+DEBUG_PORT = 4242
+
+# Debugging host used to communicate between GDB / avarice / simulavr, normally
+#     just set to localhost unless doing some sort of crazy debugging when
+#     avarice is running on a different computer.
+DEBUG_HOST = localhost
+
+#============================================================================
+
+# Define programs and commands.
+SHELL = sh
+CC = avr-gcc
+OBJCOPY = avr-objcopy
+OBJDUMP = avr-objdump
+SIZE = avr-size
+AR = avr-ar rcs
+NM = avr-nm
+AVRDUDE = avrdude
+REMOVE = rm -f
+REMOVEDIR = rm -rf
+COPY = cp
+WINSHELL = cmd
+
+# Define Messages
+# English
+MSG_ERRORS_NONE = Errors: none
+MSG_BEGIN = -------- begin --------
+MSG_END = --------  end  --------
+MSG_SIZE_BEFORE = Size before:
+MSG_SIZE_AFTER = Size after:
+MSG_COFF = Converting to AVR COFF:
+MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
+MSG_FLASH = Creating load file for Flash:
+MSG_EEPROM = Creating load file for EEPROM:
+MSG_EXTENDED_LISTING = Creating Extended Listing:
+MSG_SYMBOL_TABLE = Creating Symbol Table:
+MSG_LINKING = Linking:
+MSG_COMPILING = Compiling C:
+MSG_COMPILING_CPP = Compiling C++:
+MSG_ASSEMBLING = Assembling:
+MSG_CLEANING = Cleaning project:
+MSG_CREATING_LIBRARY = Creating library:
+
+# Define all object files.
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+
+# Define all listing files.
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+
+# Compiler flags to generate dependency files.
+GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
+
+# Combine all necessary flags and optional flags.
+# Add target processor to flags.
+ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS)
+ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS)
+ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
+
+# Default target.
+all: begin gccversion sizebefore build sizeafter end
+
+# Change the build target to build a HEX file or a library.
+build: elf hex bin eep lss sym
+#build: lib
+
+elf: $(TARGET).elf
+hex: $(TARGET).hex
+bin: $(TARGET).bin
+eep: $(TARGET).eep
+lss: $(TARGET).lss
+sym: $(TARGET).sym
+LIBNAME=lib$(TARGET).a
+lib: $(LIBNAME)
+
+# Eye candy.
+# AVR Studio 3.x does not check make's exit code but relies on
+# the following magic strings to be generated by the compile job.
+begin:
+	@echo
+	@echo $(MSG_BEGIN)
+
+end:
+	@echo $(MSG_END)
+	@echo
+
+# Display size of file.
+HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
+ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
+
+sizebefore:
+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
+	2>/dev/null; echo; fi
+
+sizeafter:
+	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
+	2>/dev/null; echo; fi
+
+# Display compiler version information.
+gccversion :
+	@$(CC) --version
+
+# Program the device.
+program: $(TARGET).hex $(TARGET).eep
+	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+
+# Generate avr-gdb config/init file which does the following:
+#     define the reset signal, load the target file, connect to target, and set
+#     a breakpoint at main().
+gdb-config:
+	@$(REMOVE) $(GDBINIT_FILE)
+	@echo define reset >> $(GDBINIT_FILE)
+	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
+	@echo end >> $(GDBINIT_FILE)
+	@echo file $(TARGET).elf >> $(GDBINIT_FILE)
+	@echo target remote $(DEBUG_HOST):$(DEBUG_PORT)  >> $(GDBINIT_FILE)
+ifeq ($(DEBUG_BACKEND),simulavr)
+	@echo load  >> $(GDBINIT_FILE)
+endif
+	@echo break main >> $(GDBINIT_FILE)
+
+debug: gdb-config $(TARGET).elf
+ifeq ($(DEBUG_BACKEND), avarice)
+	@echo Starting AVaRICE - Press enter when "waiting to connect" message displays.
+	@$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \
+	$(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT)
+	@$(WINSHELL) /c pause
+
+else
+	@$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \
+	$(DEBUG_MFREQ) --port $(DEBUG_PORT)
+endif
+	@$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE)
+
+# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
+COFFCONVERT = $(OBJCOPY) --debugging
+COFFCONVERT += --change-section-address .data-0x800000
+COFFCONVERT += --change-section-address .bss-0x800000
+COFFCONVERT += --change-section-address .noinit-0x800000
+COFFCONVERT += --change-section-address .eeprom-0x810000
+
+coff: $(TARGET).elf
+	@echo
+	@echo $(MSG_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-avr $< $(TARGET).cof
+
+extcoff: $(TARGET).elf
+	@echo
+	@echo $(MSG_EXTENDED_COFF) $(TARGET).cof
+	$(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof
+
+# Create final output files (.hex, .eep) from ELF output file.
+%.hex: %.elf
+	@echo
+	@echo $(MSG_FLASH) $@
+	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
+
+%.bin: %.elf
+	@echo
+	@echo $(MSG_FLASH) $@
+	$(OBJCOPY) -O binary -R .eeprom $< $@
+
+%.eep: %.elf
+	@echo
+	@echo $(MSG_EEPROM) $@
+	-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
+	--change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0
+
+# Create extended listing file from ELF output file.
+%.lss: %.elf
+	@echo
+	@echo $(MSG_EXTENDED_LISTING) $@
+	$(OBJDUMP) -h -S $< > $@
+
+# Create a symbol table from ELF output file.
+%.sym: %.elf
+	@echo
+	@echo $(MSG_SYMBOL_TABLE) $@
+	$(NM) -n $< > $@
+
+# Create library from object files.
+.SECONDARY : $(TARGET).a
+.PRECIOUS : $(OBJ)
+%.a: $(OBJ)
+	@echo
+	@echo $(MSG_CREATING_LIBRARY) $@
+	$(AR) $@ $(OBJ)
+
+# Link: create ELF output file from object files.
+.SECONDARY : $(TARGET).elf
+.PRECIOUS : $(OBJ)
+%.elf: $(OBJ)
+	@echo
+	@echo $(MSG_LINKING) $@
+	$(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS)
+
+# Compile: create object files from C source files.
+$(OBJDIR)/%.o : %.c
+	@echo
+	@echo $(MSG_COMPILING) $<
+	$(CC) -c $(ALL_CFLAGS) $< -o $@
+
+# Compile: create object files from C++ source files.
+$(OBJDIR)/%.o : %.cpp
+	@echo
+	@echo $(MSG_COMPILING_CPP) $<
+	$(CC) -c $(ALL_CPPFLAGS) $< -o $@
+
+# Compile: create assembler files from C source files.
+%.s : %.c
+	$(CC) -S $(ALL_CFLAGS) $< -o $@
+
+# Compile: create assembler files from C++ source files.
+%.s : %.cpp
+	$(CC) -S $(ALL_CPPFLAGS) $< -o $@
+
+# Assemble: create object files from assembler source files.
+$(OBJDIR)/%.o : %.S
+	@echo
+	@echo $(MSG_ASSEMBLING) $<
+	$(CC) -c $(ALL_ASFLAGS) $< -o $@
+
+# Create preprocessed source for use in sending a bug report.
+%.i : %.c
+	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
+
+# Target: clean project.
+clean: begin clean_list end
+
+clean_list :
+	@echo
+	@echo $(MSG_CLEANING)
+	$(REMOVE) $(TARGET).hex
+	$(REMOVE) $(TARGET).bin
+	$(REMOVE) $(TARGET).eep
+	$(REMOVE) $(TARGET).cof
+	$(REMOVE) $(TARGET).elf
+	$(REMOVE) $(TARGET).map
+	$(REMOVE) $(TARGET).sym
+	$(REMOVE) $(TARGET).lss
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
+	$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
+	$(REMOVE) $(SRC:.c=.s)
+	$(REMOVE) $(SRC:.c=.d)
+	$(REMOVE) $(SRC:.c=.i)
+	$(REMOVEDIR) .dep
+
+# Create object files directory
+$(shell mkdir $(OBJDIR) 2>/dev/null)
+
+# Include the dependency files.
+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+
+# Listing of phony targets.
+.PHONY : all begin finish end sizebefore sizeafter gccversion \
+build elf hex bin eep lss sym coff extcoff \
+clean clean_list program debug gdb-config
diff --git a/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/chconf.h b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/chconf.h
new file mode 100644
index 0000000..6afe4ab
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/chconf.h
@@ -0,0 +1,506 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                16
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 15624
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ *
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 128
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread automatically. The application has
+ *          then the responsibility to do one of the following:
+ *          - Spawn a custom idle thread at priority @p IDLEPRIO.
+ *          - Change the main() thread priority to @p IDLEPRIO then enter
+ *            an endless loop. In this scenario the @p main() thread acts as
+ *            the idle thread.
+ *          .
+ * @note    Unless an idle thread is spawned the @p main() thread must not
+ *          enter a sleep state.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Atomic semaphore API.
+ * @details If enabled then the semaphores the @p chSemSignalWait() API
+ *          is included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_USE_SEMSW                        TRUE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  FALSE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     FALSE
+
+/**
+ * @brief   C-runtime allocator.
+ * @details If enabled the the heap allocator APIs just wrap the C-runtime
+ *          @p malloc() and @p free() functions.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_HEAP.
+ * @note    The C-runtime may or may not require @p CH_CFG_USE_MEMCORE, see the
+ *          appropriate documentation.
+ */
+#define CH_CFG_USE_MALLOC_HEAP              FALSE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 FALSE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p Thread structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p TRUE.
+ * @note    This debug option is defaulted to TRUE because it is required by
+ *          some test cases into the test suite.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p Thread structure.
+ */
+#define THREAD_EXT_FIELDS                                                   \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define THREAD_EXT_INIT_HOOK(tp) {                                          \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define THREAD_EXT_EXIT_HOOK(tp) {                                          \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define SYSTEM_TICK_EVENT_HOOK() {                                          \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define SYSTEM_HALT_HOOK() {                                                \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/halconf.h b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/halconf.h
new file mode 100644
index 0000000..72c1874
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/halconf.h
@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM                  FALSE
+#endif
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/main.c b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/main.c
new file mode 100644
index 0000000..1160b46
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/main.c
@@ -0,0 +1,62 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+static WORKING_AREA(waThread1, 32);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("Blinker");
+  while (true) {
+    palTogglePad(IOPORT2, PORTB_LED1);
+    chThdSleepMilliseconds(1000);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  palClearPad(IOPORT2, PORTB_LED1);
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   */
+  sdStart(&SD1, NULL);
+
+  /*
+   * Starts the LED blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  chnWrite(&SD1, (const uint8_t *)"Hello World!\r\n", 14);
+  while(TRUE) {
+    chThdSleepMilliseconds(1000);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/mcuconf.h b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/mcuconf.h
new file mode 100644
index 0000000..3682828
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/mcuconf.h
@@ -0,0 +1,84 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * AVR drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the driver
+ * is enabled in halconf.h.
+ */
+
+/*
+ * ADC driver system settings.
+ */
+#define AVR_ADC_USE_ADC1                   FALSE
+
+/*
+ * CAN driver system settings.
+ */
+
+/*
+ * MAC driver system settings.
+ */
+
+/*
+ * PWM driver system settings.
+ */
+#define AVR_PWM_USE_TIM1                   FALSE
+#define AVR_PWM_USE_TIM2                   FALSE
+#define AVR_PWM_USE_TIM3                   FALSE
+#define AVR_PWM_USE_TIM4                   FALSE
+#define AVR_PWM_USE_TIM5                   FALSE
+
+/*
+ * ICU driver system settings.
+ */
+#define AVR_ICU_USE_TIM1                   FALSE
+#define AVR_ICU_USE_TIM3                   FALSE
+#define AVR_ICU_USE_TIM4                   FALSE
+#define AVR_ICU_USE_TIM5                   FALSE
+
+/*
+ * GPT driver system settings.
+ */
+#define AVR_GPT_USE_TIM1                   FALSE
+#define AVR_GPT_USE_TIM2                   FALSE
+#define AVR_GPT_USE_TIM3                   FALSE
+#define AVR_GPT_USE_TIM4                   FALSE
+#define AVR_GPT_USE_TIM5                   FALSE
+
+/*
+ * SERIAL driver system settings.
+ */
+#define AVR_SERIAL_USE_USART0              TRUE
+#define AVR_SERIAL_USE_USART1              FALSE
+
+/*
+ * I2C driver system settings.
+ */
+#define AVR_I2C_USE_I2C1                   FALSE
+
+/*
+ * SPI driver system settings.
+ */
+#define AVR_SPI_USE_SPI1                   FALSE
+#define AVR_SPI_USE_16BIT_POLLED_EXCHANGE  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/readme.txt b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/readme.txt
new file mode 100644
index 0000000..2a1524d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/AVR/RT-ARDUINOUNO/readme.txt
@@ -0,0 +1,22 @@
+*****************************************************************************
+** ChibiOS/RT port for Atmel AVR ATmega1280.                                **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an Arduino Mega board.
+
+** The Demo **
+
+The demo currently just prints the TestThread output on Serial0, which is
+available on the board USB connector (FT232 converter), and toggles the LED
+on PB7 (pin 13 on Arduino IDE) every second.
+
+** Build Procedure **
+
+The demo was built using the GCC AVR toolchain. It should build with WinAVR too!
+
+** Notes **
+
+This demo runs natively so the Arduino bootloader must be removed and the FUSEs
+reprogrammed. The values used for fuses are LFUSE=0xe7 and HFUSE=0x99.
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/.cproject b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/.cproject
new file mode 100644
index 0000000..ee537ea
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/.cproject
@@ -0,0 +1,58 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.1486748638">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1486748638" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration buildProperties="" description="" id="0.1486748638" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.1486748638." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1407624974" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1407624974.1739056395" name=""/>
+							<builder id="org.eclipse.cdt.build.core.settings.default.builder.572576823" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.395052375" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.915062549" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.1246303957" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths" valueType="includePath"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1052951177" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1374292263" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.960597774" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths" valueType="includePath"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1196870340" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1662950382" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.1546359289" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths" valueType="includePath"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1035179109" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+					<fileInfo id="0.1486748638.445618555" name="main.c" rcbsApplicability="disable" resourcePath="main.c" toolsToInvoke="org.eclipse.cdt.build.core.settings.holder.1662950382.1362606599">
+						<tool id="org.eclipse.cdt.build.core.settings.holder.1662950382.1362606599" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder.915062549">
+							<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1662648469" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+						</tool>
+					</fileInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-FREEDOM-K20D50M-EXT.null.1956062936" name="RT-FREEDOM-K20D50M-EXT"/>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope"/>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.1486748638">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/.project b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/.project
new file mode 100644
index 0000000..f885570
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/.project
@@ -0,0 +1,34 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-FREEDOM-K20D50M-EXT</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.core.ccnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/Makefile b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/Makefile
new file mode 100644
index 0000000..2e2fad2
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/Makefile
@@ -0,0 +1,217 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_k20x.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/KINETIS/K20x/platform.mk
+include $(CHIBIOS)/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/MK20DX128.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+SREC = $(CP) -O srec
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/chconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/chconf.h
new file mode 100644
index 0000000..b7a340d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 20
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/debug/RT-FREEDOM-K20D50M-EXT.launch b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/debug/RT-FREEDOM-K20D50M-EXT.launch
new file mode 100644
index 0000000..4f14745
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/debug/RT-FREEDOM-K20D50M-EXT.launch
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="com.zylin.embeddedcdt.idleNative">
+<stringAttribute key="bad_container_name" value="/RT-FREEDOM-KL25Z-EX/debug"/>
+<booleanAttribute key="com.zylin.embeddedcdt.debugger_app_console" value="false"/>
+<stringAttribute key="com.zylin.embeddedcdt.debugger_init_commands" value="target extended-remote localhost:3333&#10;monitor reset init&#10;load&#10;monitor reset halt"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="/Users/derek/Documents/Arm/gcc-arm-none-eabi-4_8-2014q2/bin/arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.GDB_INIT" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.breakpointsFullPath" value="false"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="org.eclipse.cdt.debug.mi.core.standardCommandFactory"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_ID" value="com.zylin.embeddedcdt.EmbeddedCDebugger"/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_START_MODE" value="run"/>
+<booleanAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN" value="false"/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN_SYMBOL" value="main"/>
+<booleanAttribute key="org.eclipse.cdt.launch.ENABLE_REGISTER_BOOKKEEPING" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.launch.ENABLE_VARIABLE_BOOKKEEPING" value="false"/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#10;&lt;globalVariableList/&gt;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#10;&lt;memoryBlockExpressionList/&gt;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-FREEDOM-K20D50M-EXT"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1185372693"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-FREEDOM-K20D50M-EXT"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/halconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/halconf.h
new file mode 100644
index 0000000..80ff745
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 TRUE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/main.c b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/main.c
new file mode 100644
index 0000000..a329884
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/main.c
@@ -0,0 +1,62 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+/* Triggered when the button is pressed. The blue led is toggled. */
+static void extcb1(EXTDriver *extp, expchannel_t channel) {
+  (void)extp;
+  (void)channel;
+
+  palTogglePad(IOPORT4, 4);
+}
+
+static const EXTConfig extcfg = {
+  {
+   {EXT_CH_MODE_FALLING_EDGE | EXT_CH_MODE_AUTOSTART, extcb1, PORTA, 1}
+  }
+};
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  palSetPad(IOPORT3, 3);    // Red
+  palSetPad(IOPORT4, 4);    // Green
+  palSetPad(IOPORT1, 2);    // Blue
+
+  /*
+   * Activates the EXT driver 1.
+   */
+  palSetPadMode(IOPORT1, 1, PAL_MODE_INPUT_PULLUP);
+  extStart(&EXTD1, &extcfg);
+
+  while (1) {
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/mcuconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/mcuconf.h
new file mode 100644
index 0000000..198a03d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/mcuconf.h
@@ -0,0 +1,116 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define K20x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+/* Disable all clock intialization */
+#define KINETIS_NO_INIT             FALSE
+
+/* PEE mode - external 8 MHz crystal with PLL for 48 MHz core/system clock. */
+#if 1
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_PEE
+#define KINETIS_XTAL_FREQUENCY      8000000UL
+#define KINETIS_SYSCLK_FREQUENCY    48000000UL
+#endif
+
+/* FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#endif /* 0 */
+
+/* FEE mode - 24 MHz with external 32.768 kHz crystal */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         0           /* 732x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1     1           /* Divide 48 MHz FLL by 1 => 24 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4     2           /* Divide OUTDIV1 output by 2 => 12 MHz */
+#define KINETIS_SYSCLK_FREQUENCY    23986176UL  /* 32.768 kHz*732 (~24 MHz) */
+#define KINETIS_UART0_CLOCK_FREQ    (32768 * 732) /* FLL output */
+#define KINETIS_UART0_CLOCK_SRC     1           /* Select FLL clock */
+#define KINETIS_BUSCLK_FREQUENCY    (KINETIS_SYSCLK_FREQUENCY / KINETIS_MCG_FLL_OUTDIV4)
+#endif /* 0 */
+
+/* FEE mode - 48 MHz */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1     1           /* Divide 48 MHz FLL by 1 => 48 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4     2           /* Divide OUTDIV1 output by 2 => 24 MHz */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#endif /* 0 */
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0              TRUE
+
+/*
+ * EXTI driver system settings.
+ */
+#define KINETIS_EXTI_NUM_CHANNELS               1
+#define KINETIS_EXT_PORTA_IRQ_PRIORITY          3
+#define KINETIS_EXT_PORTB_IRQ_PRIORITY          3
+#define KINETIS_EXT_PORTC_IRQ_PRIORITY          3
+#define KINETIS_EXT_PORTD_IRQ_PRIORITY          3
+#define KINETIS_EXT_PORTE_IRQ_PRIORITY          3
+
+/*
+ * Processor specific widths of each port.
+ * Smaller numbers can be used if only lower pins in a port are being used to
+ * generate interrupts. Can be set to 0 if a port is unused.
+ */
+
+
+#if 0
+/* MK20 48pin */
+#define KINETIS_EXT_PORTA_WIDTH                 20
+#define KINETIS_EXT_PORTB_WIDTH                 18
+#define KINETIS_EXT_PORTC_WIDTH                 8
+#define KINETIS_EXT_PORTD_WIDTH                 8
+#define KINETIS_EXT_PORTE_WIDTH                 0
+#endif
+
+/* MK20 64pin  */
+#define KINETIS_EXT_PORTA_WIDTH                 20
+#define KINETIS_EXT_PORTB_WIDTH                 20
+#define KINETIS_EXT_PORTC_WIDTH                 12
+#define KINETIS_EXT_PORTD_WIDTH                 8
+#define KINETIS_EXT_PORTE_WIDTH                 2
+
+#if 0
+/* MK20 144pin  */
+#define KINETIS_EXT_PORTA_WIDTH                 30
+#define KINETIS_EXT_PORTB_WIDTH                 24
+#define KINETIS_EXT_PORTC_WIDTH                 20
+#define KINETIS_EXT_PORTD_WIDTH                 16
+#define KINETIS_EXT_PORTE_WIDTH                 13
+#endif
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/readme.txt b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/readme.txt
new file mode 100644
index 0000000..8d6d4ee
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M-EXT/readme.txt
@@ -0,0 +1,16 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 Freedom Board K20D50M.                **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an Freescale Freedom K20D50M board.
+
+** The Demo **
+
+Generates an interrupt from an external button on PTA1. Assumes a button
+is connected between PTA1 and ground. Uses the internal pullup on PTA1.
+
+When the button is pressed the green led will toggle.
+
+** Build Procedure **
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M/Makefile b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M/Makefile
new file mode 100644
index 0000000..2e2fad2
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M/Makefile
@@ -0,0 +1,217 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_k20x.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/KINETIS/K20x/platform.mk
+include $(CHIBIOS)/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/MK20DX128.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+SREC = $(CP) -O srec
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M/chconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M/chconf.h
new file mode 100644
index 0000000..b7a340d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 20
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M/halconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M/main.c b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M/main.c
new file mode 100644
index 0000000..9a2ca0e
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M/main.c
@@ -0,0 +1,85 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+static THD_WORKING_AREA(waThread1, 64);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("RedBlinker");
+  while (true) {
+    palTogglePad(IOPORT3, 3);
+    chThdSleepMilliseconds(300);
+  }
+}
+
+static THD_WORKING_AREA(waThread2, 64);
+static THD_FUNCTION(Thread2, arg) {
+
+  (void)arg;
+  chRegSetThreadName("GreenBlinker");
+  while (true) {
+    palTogglePad(IOPORT4, 4);
+    chThdSleepMilliseconds(600);
+  }
+}
+
+static THD_WORKING_AREA(waThread3, 64);
+static THD_FUNCTION(Thread3, arg) {
+
+  (void)arg;
+  chRegSetThreadName("BlueBlinker");
+  while (true) {
+    palTogglePad(IOPORT1, 2);
+    chThdSleepMilliseconds(900);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates serial 1 (UART0) using the driver default configuration.
+   */
+  sdStart(&SD1, NULL);
+
+  /*
+   * Creates the blinker threads.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+  chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO, Thread2, NULL);
+  chThdCreateStatic(waThread3, sizeof(waThread3), NORMALPRIO, Thread3, NULL);
+
+  TestThread(&SD1);
+  while (1) {
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M/mcuconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M/mcuconf.h
new file mode 100644
index 0000000..6189709
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M/mcuconf.h
@@ -0,0 +1,74 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define K20x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+/* Enable clock initialization by HAL */
+#define KINETIS_NO_INIT             FALSE
+
+/* PEE mode - external 8 MHz crystal with PLL for 48 MHz core/system clock. */
+#if 1
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_PEE
+#define KINETIS_XTAL_FREQUENCY      8000000UL
+#define KINETIS_SYSCLK_FREQUENCY    48000000UL
+#endif
+
+/* FEI mode - 48 MHz with internal 32.768 kHz oscillator */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#endif /* 0 */
+
+/* FEE mode - 24 MHz with external 32.768 kHz crystal */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         0           /* 732x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1     1           /* Divide 48 MHz FLL by 1 => 24 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4     2           /* Divide OUTDIV1 output by 2 => 12 MHz */
+#define KINETIS_SYSCLK_FREQUENCY    23986176UL  /* 32.768 kHz*732 (~24 MHz) */
+#define KINETIS_UART0_CLOCK_FREQ    (32768 * 732) /* FLL output */
+#define KINETIS_UART0_CLOCK_SRC     1           /* Select FLL clock */
+#define KINETIS_BUSCLK_FREQUENCY    (KINETIS_SYSCLK_FREQUENCY / KINETIS_MCG_FLL_OUTDIV4)
+#endif /* 0 */
+
+/* FEE mode - 48 MHz */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1     1           /* Divide 48 MHz FLL by 1 => 48 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4     2           /* Divide OUTDIV1 output by 2 => 24 MHz */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#endif /* 0 */
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0              TRUE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M/readme.txt b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M/readme.txt
new file mode 100644
index 0000000..449b616
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-K20D50M/readme.txt
@@ -0,0 +1,16 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 Freedom Board K20D50M.                **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an Freescale Freedom K20D50M board.
+
+** The Demo **
+
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO. just modify the TRGT line in the makefile in order to use
+different GCC toolchains.
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/.cproject b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/.cproject
new file mode 100644
index 0000000..4e3f475
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/.cproject
@@ -0,0 +1,53 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.1036984191">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1036984191" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration buildProperties="" description="" id="0.1036984191" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.1036984191." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.821794271" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.821794271.1893716416" name=""/>
+							<builder id="org.eclipse.cdt.build.core.settings.default.builder.887297527" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.898586141" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.2094478021" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.1106703813" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1380670738" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1239989050" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.437018981" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.901576669" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1349089589" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.562130188" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.223906781" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-FREEDOM-KL25Z-EXT.null.1091738228" name="RT-FREEDOM-KL25Z-EXT"/>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope"/>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.1036984191">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/.project b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/.project
new file mode 100644
index 0000000..c5916b2
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/.project
@@ -0,0 +1,34 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-FREEDOM-KL25Z-EXT</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.core.ccnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/Makefile b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/Makefile
new file mode 100644
index 0000000..d2f8aa2
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/Makefile
@@ -0,0 +1,212 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_kl2x.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/KINETIS/KL2x/platform.mk
+include $(CHIBIOS)/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/KL25Z128.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m0
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+SREC = $(CP) -O srec
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/chconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/chconf.h
new file mode 100644
index 0000000..b7a340d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 20
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/debug/RT-FREEDOM-KL25Z-EXT.launch b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/debug/RT-FREEDOM-KL25Z-EXT.launch
new file mode 100644
index 0000000..5c04d8c
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/debug/RT-FREEDOM-KL25Z-EXT.launch
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="com.zylin.embeddedcdt.idleNative">
+<stringAttribute key="bad_container_name" value="/RT-FREEDOM-KL25Z-EX/debug"/>
+<booleanAttribute key="com.zylin.embeddedcdt.debugger_app_console" value="false"/>
+<stringAttribute key="com.zylin.embeddedcdt.debugger_init_commands" value="target extended-remote localhost:3333&#10;monitor reset init&#10;load&#10;monitor reset halt"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="/Users/derek/Documents/Arm/gcc-arm-none-eabi-4_8-2014q2/bin/arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.GDB_INIT" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.breakpointsFullPath" value="false"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="org.eclipse.cdt.debug.mi.core.standardCommandFactory"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_ID" value="com.zylin.embeddedcdt.EmbeddedCDebugger"/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_START_MODE" value="run"/>
+<booleanAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN" value="false"/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN_SYMBOL" value="main"/>
+<booleanAttribute key="org.eclipse.cdt.launch.ENABLE_REGISTER_BOOKKEEPING" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.launch.ENABLE_VARIABLE_BOOKKEEPING" value="false"/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#10;&lt;globalVariableList/&gt;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#10;&lt;memoryBlockExpressionList/&gt;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-FREEDOM-KL25Z-EXT"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1185372693"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-FREEDOM-KL25Z-EXT"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/halconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/halconf.h
new file mode 100644
index 0000000..bed5bcb
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 TRUE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/main.c b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/main.c
new file mode 100644
index 0000000..e90cf8c
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/main.c
@@ -0,0 +1,68 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+/* Triggered when the button is pressed. The blue led is toggled. */
+static void extcb1(EXTDriver *extp, expchannel_t channel) {
+  (void)extp;
+  (void)channel;
+
+  palTogglePad(IOPORT4, 1);
+}
+
+static const EXTConfig extcfg = {
+  {
+   {EXT_CH_MODE_FALLING_EDGE | EXT_CH_MODE_AUTOSTART, extcb1, PORTA, 1}
+  }
+};
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates serial 1 (UART0) using the driver default configuration.
+   */
+  sdStart(&SD1, NULL);
+
+  /* Turn the LEDs OFF */
+  palSetPad(IOPORT2, 18);
+  palSetPad(IOPORT2, 19);
+  palSetPad(IOPORT4, 1);
+
+  /*
+   * Activates the EXT driver 1.
+   */
+  palSetPadMode(IOPORT1, 1, PAL_MODE_INPUT_PULLUP);
+  extStart(&EXTD1, &extcfg);
+
+  while (1) {
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/mcuconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/mcuconf.h
new file mode 100644
index 0000000..da7ba95
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/mcuconf.h
@@ -0,0 +1,149 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define KL2x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+/* FEI mode */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
+#define KINETIS_SYSCLK_FREQUENCY    21000000UL
+#endif /* 0 */
+
+/* FEE mode - 24 MHz with external 32.768 kHz crystal */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         0           /* 732x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1     1           /* Divide 48 MHz FLL by 1 => 24 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4     2           /* Divide OUTDIV1 output by 2 => 12 MHz */
+#define KINETIS_SYSCLK_FREQUENCY    23986176UL  /* 32.768 kHz*732 (~24 MHz) */
+#define KINETIS_UART0_CLOCK_FREQ    (32768 * 732) /* FLL output */
+#define KINETIS_UART0_CLOCK_SRC     1           /* Select FLL clock */
+#define KINETIS_BUSCLK_FREQUENCY    (KINETIS_SYSCLK_FREQUENCY / KINETIS_MCG_FLL_OUTDIV4)
+#endif /* 0 */
+
+/* FEE mode - 48 MHz */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1     1           /* Divide 48 MHz FLL by 1 => 48 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4     2           /* Divide OUTDIV1 output by 2 => 24 MHz */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#endif /* 0 */
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0              TRUE
+
+/*
+ * EXTI driver system settings.
+ */
+#define KINETIS_EXTI_NUM_CHANNELS               1
+#define KINETIS_EXT_PORTA_IRQ_PRIORITY          3
+#define KINETIS_EXT_PORTB_IRQ_PRIORITY          3
+#define KINETIS_EXT_PORTC_IRQ_PRIORITY          3
+#define KINETIS_EXT_PORTD_IRQ_PRIORITY          3
+#define KINETIS_EXT_PORTE_IRQ_PRIORITY          3
+
+/*
+ * Processor specific widths of each port.
+ * Smaller numbers can be used if only lower pins in a port are being used to
+ * generate interrupts. Can be set to 0 if a port is unused.
+ */
+
+
+#if 0
+/* MK20 48pin */
+#define KINETIS_EXT_PORTA_WIDTH                 20
+#define KINETIS_EXT_PORTB_WIDTH                 18
+#define KINETIS_EXT_PORTC_WIDTH                 8
+#define KINETIS_EXT_PORTD_WIDTH                 8
+#define KINETIS_EXT_PORTE_WIDTH                 0
+#endif
+
+#if 0
+/* MK20 64pin  */
+#define KINETIS_EXT_PORTA_WIDTH                 20
+#define KINETIS_EXT_PORTB_WIDTH                 20
+#define KINETIS_EXT_PORTC_WIDTH                 12
+#define KINETIS_EXT_PORTD_WIDTH                 8
+#define KINETIS_EXT_PORTE_WIDTH                 2
+#endif
+
+#if 0
+/* MK20 144pin  */
+#define KINETIS_EXT_PORTA_WIDTH                 30
+#define KINETIS_EXT_PORTB_WIDTH                 24
+#define KINETIS_EXT_PORTC_WIDTH                 20
+#define KINETIS_EXT_PORTD_WIDTH                 16
+#define KINETIS_EXT_PORTE_WIDTH                 13
+#endif
+
+
+#if 0
+/* KL25 32pin */
+#define KINETIS_EXT_PORTA_WIDTH                 21
+#define KINETIS_EXT_PORTD_WIDTH                 8
+#endif
+
+#if 0
+/* KL25 48pin */
+#define KINETIS_EXT_PORTA_WIDTH                 21
+#define KINETIS_EXT_PORTD_WIDTH                 8
+#endif
+
+#if 0
+/* KL25 64pin  */
+#define KINETIS_EXT_PORTA_WIDTH                 21
+#define KINETIS_EXT_PORTD_WIDTH                 8
+#endif
+
+/* KL25 80pin  */
+#define KINETIS_EXT_PORTA_WIDTH                 21
+#define KINETIS_EXT_PORTD_WIDTH                 8
+
+#ifndef KINETIS_EXT_PORTA_WIDTH
+#define KINETIS_EXT_PORTA_WIDTH                 0
+#endif
+
+#ifndef KINETIS_EXT_PORTB_WIDTH
+#define KINETIS_EXT_PORTB_WIDTH                 0
+#endif
+
+#ifndef KINETIS_EXT_PORTC_WIDTH
+#define KINETIS_EXT_PORTC_WIDTH                 0
+#endif
+
+#ifndef KINETIS_EXT_PORTD_WIDTH
+#define KINETIS_EXT_PORTD_WIDTH                 0
+#endif
+
+#ifndef KINETIS_EXT_PORTE_WIDTH
+#define KINETIS_EXT_PORTE_WIDTH                 0
+#endif
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/readme.txt b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/readme.txt
new file mode 100644
index 0000000..fd28dd8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z-EXT/readme.txt
@@ -0,0 +1,16 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 Freedom Board KL25Z.                **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an Freescale Freedom KL25Z board.
+
+** The Demo **
+
+Generates an interrupt from an external button on PTA1. Assumes a button
+is connected between PTA1 and ground. Uses the internal pullup on PTA1.
+
+When the button is pressed the blue led will toggle.
+
+** Build Procedure **
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z/Makefile b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z/Makefile
new file mode 100644
index 0000000..d2f8aa2
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z/Makefile
@@ -0,0 +1,212 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_kl2x.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/KINETIS/KL2x/platform.mk
+include $(CHIBIOS)/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/KL25Z128.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m0
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+SREC = $(CP) -O srec
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z/chconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z/chconf.h
new file mode 100644
index 0000000..b7a340d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 20
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z/halconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z/main.c b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z/main.c
new file mode 100644
index 0000000..d565ca0
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z/main.c
@@ -0,0 +1,85 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+static THD_WORKING_AREA(waThread1, 64);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("RedBlinker");
+  while (true) {
+    palTogglePad(IOPORT2, 18);
+    chThdSleepMilliseconds(300);
+  }
+}
+
+static THD_WORKING_AREA(waThread2, 64);
+static THD_FUNCTION(Thread2, arg) {
+
+  (void)arg;
+  chRegSetThreadName("GreenBlinker");
+  while (true) {
+    palTogglePad(IOPORT2, 19);
+    chThdSleepMilliseconds(600);
+  }
+}
+
+static THD_WORKING_AREA(waThread3, 64);
+static THD_FUNCTION(Thread3, arg) {
+
+  (void)arg;
+  chRegSetThreadName("BlueBlinker");
+  while (true) {
+    palTogglePad(IOPORT4, 1);
+    chThdSleepMilliseconds(900);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates serial 1 (UART0) using the driver default configuration.
+   */
+  sdStart(&SD1, NULL);
+
+  /*
+   * Creates the blinker threads.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+  chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO, Thread2, NULL);
+  chThdCreateStatic(waThread3, sizeof(waThread3), NORMALPRIO, Thread3, NULL);
+
+  TestThread(&SD1);
+  while (1) {
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z/mcuconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z/mcuconf.h
new file mode 100644
index 0000000..3b77632
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z/mcuconf.h
@@ -0,0 +1,76 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define KL2x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+/* FEI mode */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
+#define KINETIS_SYSCLK_FREQUENCY    21000000UL
+#endif /* 0 */
+
+/* FEE mode - 24 MHz with external 32.768 kHz crystal */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         0           /* 732x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1     1           /* Divide 48 MHz FLL by 1 => 24 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4     2           /* Divide OUTDIV1 output by 2 => 12 MHz */
+#define KINETIS_SYSCLK_FREQUENCY    23986176UL  /* 32.768 kHz*732 (~24 MHz) */
+#define KINETIS_UART0_CLOCK_FREQ    (32768 * 732) /* FLL output */
+#define KINETIS_UART0_CLOCK_SRC     1           /* Select FLL clock */
+#define KINETIS_BUSCLK_FREQUENCY    (KINETIS_SYSCLK_FREQUENCY / KINETIS_MCG_FLL_OUTDIV4)
+#endif /* 0 */
+
+/* FEE mode - 48 MHz */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1     1           /* Divide 48 MHz FLL by 1 => 48 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4     2           /* Divide OUTDIV1 output by 2 => 24 MHz */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#endif /* 0 */
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0              TRUE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z/readme.txt b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z/readme.txt
new file mode 100644
index 0000000..c43e6b8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-FREEDOM-KL25Z/readme.txt
@@ -0,0 +1,16 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M0+ Freedom Board KL25Z.                 **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an Freescale Freedom KL25Z board.
+
+** The Demo **
+
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO. just modify the TRGT line in the makefile in order to use
+different GCC toolchains.
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/.cproject b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/.cproject
new file mode 100644
index 0000000..7173b13
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/.cproject
@@ -0,0 +1,53 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.1185372693">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1185372693" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration buildProperties="" description="" id="0.1185372693" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.1185372693." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.660721347" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.660721347.1332545714" name=""/>
+							<builder id="org.eclipse.cdt.build.core.settings.default.builder.60051613" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1924496340" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.2010200543" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.322767025" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.470445941" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1228244998" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.1607513453" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1227387683" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.815556380" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.471328015" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.102526265" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-MCHCK-K20-GPT.null.1419560058" name="RT-MCHCK-K20-GPT"/>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope"/>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.1185372693">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/.project b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/.project
new file mode 100644
index 0000000..c93217c
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/.project
@@ -0,0 +1,34 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-MCHCK-K20-GPT</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.core.ccnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/Makefile b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/Makefile
new file mode 100644
index 0000000..9969b7a
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/Makefile
@@ -0,0 +1,217 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_k20x.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/KINETIS/K20x/platform.mk
+include $(CHIBIOS)/os/hal/boards/MCHCK_K20/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/MK20DX128.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+SREC = $(CP) -O srec
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/chconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/chconf.h
new file mode 100644
index 0000000..b7a340d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 20
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/debug/RT-MCHCK-K20-GPT.launch b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/debug/RT-MCHCK-K20-GPT.launch
new file mode 100644
index 0000000..28658c2
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/debug/RT-MCHCK-K20-GPT.launch
@@ -0,0 +1,31 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="com.zylin.embeddedcdt.idleNative">
+<stringAttribute key="bad_container_name" value="/RT-MCHCK-K20-DMA/deb"/>
+<booleanAttribute key="com.zylin.embeddedcdt.debugger_app_console" value="false"/>
+<stringAttribute key="com.zylin.embeddedcdt.debugger_init_commands" value="target extended-remote localhost:3333&#10;monitor stm32f4x.cpu configure -rtos auto&#10;monitor reset init&#10;load&#10;monitor reset halt"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="/Users/derek/Documents/Arm/gcc-arm-none-eabi-4_8-2014q2/bin/arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.GDB_INIT" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.breakpointsFullPath" value="false"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="org.eclipse.cdt.debug.mi.core.standardCommandFactory"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_ID" value="com.zylin.embeddedcdt.EmbeddedCDebugger"/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_START_MODE" value="run"/>
+<booleanAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN" value="false"/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_STOP_AT_MAIN_SYMBOL" value="main"/>
+<booleanAttribute key="org.eclipse.cdt.launch.ENABLE_REGISTER_BOOKKEEPING" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.launch.ENABLE_VARIABLE_BOOKKEEPING" value="false"/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#10;&lt;globalVariableList/&gt;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#10;&lt;memoryBlockExpressionList/&gt;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-MCHCK-K20-GPT"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1185372693"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-MCHCK-K20-GPT"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/halconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/halconf.h
new file mode 100644
index 0000000..5bd3910
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 TRUE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/main.c b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/main.c
new file mode 100644
index 0000000..201f1b1
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/main.c
@@ -0,0 +1,69 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+#define POLLED_TEST     FALSE
+
+void gptcb(GPTDriver *gptp) {
+
+  (void)gptp;
+
+  palTogglePad(GPIOB, GPIOB_LED);
+}
+
+/*
+ * GPT configuration structure.
+ */
+static const GPTConfig gpt1cfg = {
+  4,
+  gptcb
+};
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   *  Initializes the GPT driver 1.
+   */
+  gptStart(&GPTD1, &gpt1cfg);
+
+#if !POLLED_TEST
+  gptStartContinuous(&GPTD1, 2);
+#endif
+
+  while (1) {
+#if POLLED_TEST
+    gpt_lld_polled_delay(&GPTD1, 1) ;
+    palTogglePad(GPIOB, GPIOB_LED);
+#else
+    chThdSleepMilliseconds(500);
+#endif
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/mcuconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/mcuconf.h
new file mode 100644
index 0000000..cc4b581
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/mcuconf.h
@@ -0,0 +1,78 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define K20x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+#define KINETIS_NO_INIT             FALSE
+
+/* FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+
+/* FEE mode - 24 MHz with external 32.768 kHz crystal */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         0           /* 732x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1     1           /* Divide 48 MHz FLL by 1 => 24 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4     2           /* Divide OUTDIV1 output by 2 => 12 MHz */
+#define KINETIS_SYSCLK_FREQUENCY    23986176UL  /* 32.768 kHz*732 (~24 MHz) */
+#define KINETIS_UART0_CLOCK_FREQ    (32768 * 732) /* FLL output */
+#define KINETIS_UART0_CLOCK_SRC     1           /* Select FLL clock */
+#define KINETIS_BUSCLK_FREQUENCY    (KINETIS_SYSCLK_FREQUENCY / KINETIS_MCG_FLL_OUTDIV4)
+#endif /* 0 */
+
+/* FEE mode - 48 MHz */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1     1           /* Divide 48 MHz FLL by 1 => 48 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4     2           /* Divide OUTDIV1 output by 2 => 24 MHz */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#endif /* 0 */
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0            TRUE
+
+/*
+ * SPI driver system settings.
+ */
+#define KINETIS_SPI_USE_SPI0                FALSE
+#define KINETIS_SPI_SPI0_IRQ_PRIORITY       8
+
+/*
+ * GPT driver system settings.
+ */
+#define KINETIS_GPT_USE_PIT0                TRUE
+#define KINETIS_GPT_PIT0_IRQ_PRIORITY       8
+/* TODO: Move this to a KINETIS registry */
+#define KINETIS_HAS_PIT0                    TRUE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/readme.txt b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/readme.txt
new file mode 100644
index 0000000..2e6aa57
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-GPT/readme.txt
@@ -0,0 +1,8 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 MCHCK K20 .                           **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an MKHCK K20 board. It use the PIT to implement the ChibiOS
+GPT functionality.
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-SPI/Makefile b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-SPI/Makefile
new file mode 100644
index 0000000..9969b7a
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-SPI/Makefile
@@ -0,0 +1,217 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_k20x.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/KINETIS/K20x/platform.mk
+include $(CHIBIOS)/os/hal/boards/MCHCK_K20/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/MK20DX128.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+SREC = $(CP) -O srec
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-SPI/chconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-SPI/chconf.h
new file mode 100644
index 0000000..b7a340d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-SPI/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 20
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-SPI/halconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-SPI/halconf.h
new file mode 100644
index 0000000..669f33b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-SPI/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 TRUE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-SPI/main.c b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-SPI/main.c
new file mode 100644
index 0000000..9094759
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-SPI/main.c
@@ -0,0 +1,95 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+void spicb(SPIDriver *spip) {
+
+  (void)spip;
+
+  palClearPad(GPIOB, GPIOB_LED);
+}
+
+/*
+ * SPI1 configuration structure.
+ */
+static const SPIConfig spi1cfg = {
+  spicb,
+  /* HW dependent part.*/
+  GPIOC,
+  0,
+  KINETIS_SPI_TAR_8BIT_SLOW
+};
+
+static THD_WORKING_AREA(waThread1, 64);
+static THD_FUNCTION(Thread1, arg) {
+  static uint8_t txbuf[5];
+  static uint8_t rxbuf[5];
+
+  (void)arg;
+  chRegSetThreadName("Blinker");
+  while (true) {
+    palSetPad(GPIOB, GPIOB_LED);
+
+    /* Send the Manufacturer and Device ID Read command */
+    txbuf[0] = 0x9F;
+
+    spiSelect(&SPID1);
+    spiExchange(&SPID1, sizeof(txbuf), txbuf, rxbuf);
+    spiUnselect(&SPID1);
+
+    chThdSleepMilliseconds(1000);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates SPID1. Slave select is configured on GPIOC pin 0.
+   */
+  palSetPadMode(GPIOC, 5, PAL_MODE_ALTERNATIVE_2);      /* SCK  */
+  palSetPadMode(GPIOC, 6, PAL_MODE_ALTERNATIVE_2);      /* MOSI */
+  palSetPadMode(GPIOD, 3, PAL_MODE_ALTERNATIVE_2);      /* MISO */
+  palSetPadMode(GPIOC, 0, PAL_MODE_OUTPUT_PUSHPULL);    /* SS   */
+
+  /*
+   *  Initializes the SPI driver 1.
+   */
+  spiStart(&SPID1, &spi1cfg);
+
+  /*
+   * Creates the blinker threads.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  while (1) {
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-SPI/mcuconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-SPI/mcuconf.h
new file mode 100644
index 0000000..70b86cf
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-SPI/mcuconf.h
@@ -0,0 +1,70 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define K20x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+#define KINETIS_NO_INIT             FALSE
+
+/* FEI mode - 48 MHz with internal 32.768 kHz crystal */
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+
+/* FEE mode - 24 MHz with external 32.768 kHz crystal */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         0           /* 732x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1     1           /* Divide 48 MHz FLL by 1 => 24 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4     2           /* Divide OUTDIV1 output by 2 => 12 MHz */
+#define KINETIS_SYSCLK_FREQUENCY    23986176UL  /* 32.768 kHz*732 (~24 MHz) */
+#define KINETIS_UART0_CLOCK_FREQ    (32768 * 732) /* FLL output */
+#define KINETIS_UART0_CLOCK_SRC     1           /* Select FLL clock */
+#define KINETIS_BUSCLK_FREQUENCY    (KINETIS_SYSCLK_FREQUENCY / KINETIS_MCG_FLL_OUTDIV4)
+#endif /* 0 */
+
+/* FEE mode - 48 MHz */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1     1           /* Divide 48 MHz FLL by 1 => 48 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4     2           /* Divide OUTDIV1 output by 2 => 24 MHz */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#endif /* 0 */
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0            TRUE
+
+/*
+ * SPI driver system settings.
+ */
+#define KINETIS_SPI_USE_SPI0                TRUE
+#define KINETIS_SPI_SPI0_IRQ_PRIORITY       8
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-SPI/readme.txt b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-SPI/readme.txt
new file mode 100644
index 0000000..705c922
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-MCHCK-K20-SPI/readme.txt
@@ -0,0 +1,17 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 MCHCK K20 .                           **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an MKHCK K20 board. It use the SPI bus to send the
+Manufacturer and Device ID Read command (0x9f) and to read the returned
+data from a standard SPI data flash device. It has been tested with
+an AT45DB081.
+
+The pin connections are
+
+  C5 is connected to SCK
+  C6 is connected to MOSI
+  D3 is connected to MISO
+  C0 is connected to SS
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-TEENSY3/Makefile b/ChibiOS_16.1.5/demos/KINETIS/RT-TEENSY3/Makefile
new file mode 100644
index 0000000..02fedf4
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-TEENSY3/Makefile
@@ -0,0 +1,217 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_k20x.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/KINETIS/K20x/platform.mk
+include $(CHIBIOS)/os/hal/boards/PJRC_TEENSY_3/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/MK20DX128.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+SREC = $(CP) -O srec
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-TEENSY3/chconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-TEENSY3/chconf.h
new file mode 100644
index 0000000..b7a340d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-TEENSY3/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 20
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-TEENSY3/halconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-TEENSY3/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-TEENSY3/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-TEENSY3/main.c b/ChibiOS_16.1.5/demos/KINETIS/RT-TEENSY3/main.c
new file mode 100644
index 0000000..591bd0f
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-TEENSY3/main.c
@@ -0,0 +1,66 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * LED blinker thread.
+ */
+static THD_WORKING_AREA(waThread1, 64);
+static THD_FUNCTION(Thread1, arg) {
+
+    (void)arg;
+    chRegSetThreadName("LEDBlinker");
+    while (true) {
+        palTogglePad(IOPORT3, PORTC_TEENSY_PIN13);
+        chThdSleepMilliseconds(500);
+    }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates serial 1 (UART0) using the driver default configuration.
+   */
+  sdStart(&SD1, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  TestThread(&SD1);
+  while (true) {
+      chThdSleepMilliseconds(1000);
+  }
+
+  return 0;
+}
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-TEENSY3/mcuconf.h b/ChibiOS_16.1.5/demos/KINETIS/RT-TEENSY3/mcuconf.h
new file mode 100644
index 0000000..ae35fe3
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-TEENSY3/mcuconf.h
@@ -0,0 +1,62 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define K20x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+
+/* Select the MCU clocking mode below by enabling the appropriate block. */
+
+/* FEI mode */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEI
+#define KINETIS_SYSCLK_FREQUENCY    21000000UL
+#endif /* 0 */
+
+/* FEE mode - 24 MHz with external 32.768 kHz crystal */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         0           /* 732x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1     1           /* Divide 48 MHz FLL by 1 => 24 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4     2           /* Divide OUTDIV1 output by 2 => 12 MHz */
+#define KINETIS_SYSCLK_FREQUENCY    23986176UL  /* 32.768 kHz*732 (~24 MHz) */
+#define KINETIS_UART0_CLOCK_FREQ    (32768 * 732) /* FLL output */
+#define KINETIS_UART0_CLOCK_SRC     1           /* Select FLL clock */
+#define KINETIS_BUSCLK_FREQUENCY    (KINETIS_SYSCLK_FREQUENCY / KINETIS_MCG_FLL_OUTDIV4)
+#endif /* 0 */
+
+/* FEE mode - 48 MHz */
+#if 0
+#define KINETIS_MCG_MODE            KINETIS_MCG_MODE_FEE
+#define KINETIS_MCG_FLL_DMX32       1           /* Fine-tune for 32.768 kHz */
+#define KINETIS_MCG_FLL_DRS         1           /* 1464x FLL factor */
+#define KINETIS_MCG_FLL_OUTDIV1     1           /* Divide 48 MHz FLL by 1 => 48 MHz */
+#define KINETIS_MCG_FLL_OUTDIV4     2           /* Divide OUTDIV1 output by 2 => 24 MHz */
+#define KINETIS_SYSCLK_FREQUENCY    47972352UL  /* 32.768 kHz * 1464 (~48 MHz) */
+#endif /* 0 */
+
+/*
+ * SERIAL driver system settings.
+ */
+#define KINETIS_SERIAL_USE_UART0              TRUE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/KINETIS/RT-TEENSY3/readme.txt b/ChibiOS_16.1.5/demos/KINETIS/RT-TEENSY3/readme.txt
new file mode 100644
index 0000000..7680d00
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/KINETIS/RT-TEENSY3/readme.txt
@@ -0,0 +1,17 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 MK20DX128.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on a PJRC Teensy 3 board.
+
+** The Demo **
+
+The demo shows how to blink the LED on pin 13 of the board.
+
+** Build Procedure **
+
+The demo has been tested by using the free ARM-none GCC toolchain. Just
+modify the TRGT line in the makefile in order to use different GCC
+toolchains.
diff --git a/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/.cproject b/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/.cproject
new file mode 100644
index 0000000..5b25f77
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/.cproject
@@ -0,0 +1,50 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.1382394121">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1382394121" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.1382394121" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.1382394121." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.642425895" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.642425895.1066130541" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1664510976" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.920594301" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.187311765" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1702411550" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.368907033" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1046049341" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.206684733" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1974737131" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-LPC214x-OLIMEX.null.263525047" name="RT-LPC214x-OLIMEX"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.1382394121">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/.project b/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/.project
new file mode 100644
index 0000000..4e56772
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-LPC214x-OLIMEX</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/OLIMEX_LPC_P2148</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/Makefile b/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/Makefile
new file mode 100644
index 0000000..b6c0a82
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/Makefile
@@ -0,0 +1,240 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = no
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the ARM System/User stack. This
+# stack is the stack used by the main() thread.
+ifeq ($(USE_SYSTEM_STACKSIZE),)
+  USE_SYSTEM_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the ARM IRQ stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_IRQ_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the ARM FIQ stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_FIQ_STACKSIZE),)
+  USE_FIQ_STACKSIZE = 64
+endif
+
+# Stack size to the allocated to the ARM Supervisor stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_SUPERVISOR_STACKSIZE),)
+  USE_SUPERVISOR_STACKSIZE = 8
+endif
+
+# Stack size to the allocated to the ARM Undefined stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_UND_STACKSIZE),)
+  USE_UND_STACKSIZE = 8
+endif
+
+# Stack size to the allocated to the ARM Abort stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_ABT_STACKSIZE),)
+  USE_ABT_STACKSIZE = 8
+endif
+
+# Enables the use of FPU.
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARM/compilers/GCC/mk/startup_lpc214x.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/LPC/LPC214x/platform.mk
+include $(CHIBIOS)/os/hal/boards/OLIMEX_LPC_P2148/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARM/compilers/GCC/mk/port_generic.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/LPC2148.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = arm7tdmi
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARM/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/chconf.h b/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/chconf.h
new file mode 100644
index 0000000..4fb581a
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/chconf.h
@@ -0,0 +1,498 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/debug/RT-LPC214x-OLIMEX (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/debug/RT-LPC214x-OLIMEX (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..a1d7c78
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/debug/RT-LPC214x-OLIMEX (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-LPC214x-OLIMEX\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor arm7_9 dcc_downloads enable&#13;&#10;monitor arm7_9 fast_memory_access enable&#13;&#10;monitor reset&#13;&#10;monitor sleep 500&#13;&#10;monitor halt 50&#13;&#10;monitor sleep 500&#13;&#10;monitor poll&#13;&#10;monitor flash erase_sector 0 0 9&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value="0"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList&gt;&lt;content id=&quot;r0-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;r1-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;r3-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;r4-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;r6-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;cpsr-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;lr_abt-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;spsr_und-(format)&quot; val=&quot;4&quot;/&gt;&lt;/contentList&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-LPC214x-OLIMEX"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1382394121"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-LPC214x-OLIMEX"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/halconf.h b/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/main.c b/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/main.c
new file mode 100644
index 0000000..b01c191
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/main.c
@@ -0,0 +1,97 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+#define BOTH_BUTTONS (PAL_PORT_BIT(PA_BUTTON1) | PAL_PORT_BIT(PA_BUTTON2))
+
+/*
+ * Red LEDs blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker1");
+  while (true) {
+    palClearPort(IOPORT1, PAL_PORT_BIT(PA_LED2));
+    chThdSleepMilliseconds(200);
+    palSetPort(IOPORT1, PAL_PORT_BIT(PA_LED1) | PAL_PORT_BIT(PA_LED2));
+    chThdSleepMilliseconds(800);
+    palClearPort(IOPORT1, PAL_PORT_BIT(PA_LED1));
+    chThdSleepMilliseconds(200);
+    palSetPort(IOPORT1, PAL_PORT_BIT(PA_LED1) | PAL_PORT_BIT(PA_LED2));
+    chThdSleepMilliseconds(800);
+  }
+}
+
+/*
+ * Yellow LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread2, 128);
+static THD_FUNCTION(Thread2, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker2");
+  while (true) {
+    palClearPad(IOPORT1, PA_LEDUSB);
+    chThdSleepMilliseconds(200);
+    palSetPad(IOPORT1, PA_LEDUSB);
+    chThdSleepMilliseconds(300);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   */
+  sdStart(&SD1, NULL);
+
+  /*
+   * Creating blinkers threads.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+  chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO, Thread2, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the buttons state and run test procedure.
+   */
+  while (true) {
+    if (!palReadPad(IOPORT1, PA_BUTTON1))
+      sdWrite(&SD1, (uint8_t *)"Hello World!\r\n", 14);
+    if (!palReadPad(IOPORT1, PA_BUTTON2))
+      TestThread(&SD1);
+    chThdSleepMilliseconds(500);
+  }
+  return 0;
+}
diff --git a/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/mcuconf.h b/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/mcuconf.h
new file mode 100644
index 0000000..20e2e21
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/LPC21xx/RT-LPC214x-OLIMEX/mcuconf.h
@@ -0,0 +1,58 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * LPC214x drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the driver
+ * is enabled in halconf.h.
+ */
+
+/*
+ * ADC driver system settings.
+ */
+
+/*
+ * CAN driver system settings.
+ */
+
+/*
+ * MAC driver system settings.
+ */
+
+/*
+ * PWM driver system settings.
+ */
+
+/*
+ * SERIAL driver system settings.
+ */
+#define USE_LPC214x_UART0           TRUE
+#define USE_LPC214x_UART1           TRUE
+#define LPC214x_UART_FIFO_PRELOAD   16
+#define LPC214x_UART0_PRIORITY      1
+#define LPC214x_UART1_PRIORITY      2
+
+/*
+ * SPI driver system settings.
+ */
+#define USE_LPC214x_SPI1            TRUE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/.cproject b/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/.cproject
new file mode 100644
index 0000000..f8050d8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/.cproject
@@ -0,0 +1,57 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.665946016">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.665946016" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.665946016" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.665946016." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1131493307" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1131493307.1844928918" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1106552272" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1064008669" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.2048166271" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1577341141" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.841305605" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.954135725" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.287919901" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1061591135" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="NIL-SPC560D-DISCOVERY.null.2129661677" name="NIL-SPC560D-DISCOVERY"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.665946016">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/NIL-SPC560D-DISCOVERY"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/.project b/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/.project
new file mode 100644
index 0000000..3040bcb
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>NIL-SPC560D-DISCOVERY</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_EVB_SPC560D</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/Makefile b/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/Makefile
new file mode 100644
index 0000000..ae0cf94
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/Makefile
@@ -0,0 +1,179 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -mno-spe -msoft-float
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data.
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT =
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = no
+endif
+
+# If enabled, this option allows to compile the application in VLE mode.
+ifeq ($(USE_VLE),)
+  USE_VLE = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the optional exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/boards/ST_EVB_SPC560D/board.mk
+include $(CHIBIOS)/os/hal/ports/SPC5/SPC560Dxx/platform.mk
+include $(CHIBIOS)/os/hal/osal/nil/osal.mk
+include $(CHIBIOS)/os/nil/nil.mk
+include $(CHIBIOS)/os/nil/ports/e200/compilers/GCC/mk/port_spc560dxx.mk
+include $(CHIBIOS)/test/nil/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(PORTLD)/SPC560D40.ld
+
+# C sources here.
+CSRC = $(PORTSRC) \
+       $(KERNSRC) \
+       $(TESTSRC) \
+       $(HALSRC) \
+       $(OSALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       main.c
+
+# C++ sources here.
+CPPSRC =
+
+# List ASM source files here
+ASMSRC = $(PORTASM)
+
+INCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \
+         $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+#MCU  = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames
+MCU  = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames
+
+#TRGT = powerpc-eabi-
+TRGT = ppc-vle-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+MOT  = $(CP) -O srec
+BIN  = $(CP) -O binary
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/e200/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/UDE/stm_xpc560b_spc560d40_minimodule_debug_jtag.cfg b/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/UDE/stm_xpc560b_spc560d40_minimodule_debug_jtag.cfg
new file mode 100644
index 0000000..ca4a75a
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/UDE/stm_xpc560b_spc560d40_minimodule_debug_jtag.cfg
@@ -0,0 +1,160 @@
+[Main]
+Signature=UDE_TARGINFO_2.0
+Description=STM XPC560B Mini Module with SPC560D40 (Jtag)
+Description1=PLL set for 48MHz
+Description2=FLASH programming prepared but not enabled
+Description3=Write Filter for BAM Module
+MCUs=Controller0
+Architecture=PowerPC
+Vendor=STM
+Board=XPC560B Mini Module
+
+[Controller0]
+Family=PowerPC
+Type=SPC560D40
+Enabled=1
+IntClock=48000
+MemDevs=BAMWriteFilter
+ExtClock=8000
+
+[Controller0.Core]
+Protocol=PPCJTAG
+Enabled=1
+
+[Controller0.Core.LoadedAddOn]
+UDEMemtool=1
+
+[Controller0.Core.PpcJtagTargIntf]
+PortType=FTDI
+ResetWaitTime=50
+MaxJtagClk=2500
+DoSramInit=1
+UseNexus=1
+AdaptiveJtagPhaseShift=1
+ConnOption=Default
+ChangeJtagClk=10000
+HaltAfterReset=1
+SimioAddr=g_JtagSimioAccess
+FreezeTimers=1
+InvalidTlbOnReset=0
+InvalidateCache=0
+ForceCacheFlush=0
+IgnoreLockedLines=0
+ExecInitCmds=1
+JtagTapNumber=0
+JtagNumOfTaps=1
+JtagNumIrBefore=0
+JtagNumIrAfter=0
+
+SimioAddr=g_JtagSimioAccess
+
+FlushCache=0
+AllowMmuSetup=1
+UseExtReset=1
+HandleWdtBug=0
+ForceEndOfReset=0
+JtagViaPod=0
+AllowResetOnCheck=0
+ChangeMsr=0
+ChangeMsrValue=0x0
+ExecOnStartCmds=0
+ExecOnHaltCmds=0
+TargetPort=Default
+EnableProgramTimeMeasurement=0
+UseHwResetMode=0
+HandleNexusAccessBug=0
+DoNotEnableTrapSwBrp=0
+CommDevSel=PortType=USB,Type=FTDI
+BootPasswd0=0xFEEDFACE
+BootPasswd1=0xCAFEBEEF
+BootPasswd2=0xFFFFFFFF
+BootPasswd3=0xFFFFFFFF
+BootPasswd4=0xFFFFFFFF
+BootPasswd5=0xFFFFFFFF
+BootPasswd6=0xFFFFFFFF
+BootPasswd7=0xFFFFFFFF
+JtagIoType=Jtag
+ExecOnHaltCmdsWhileHalted=0
+TimerForPTM=Default
+AllowBreakOnUpdateBreakpoints=0
+ClearDebugStatusOnHalt=1
+HwResetMode=Simulate
+UseMasterNexusIfResetState=1
+UseLocalAddressTranslation=1
+Use64BitNexus=0
+InitSramOnlyWhenNotInitialized=0
+AllowHarrForUpdateDebugRegs=0
+DisableE2EECC=0
+UseCore0ForNexusMemoryAccessWhileRunning=0
+
+[Controller0.Core.PpcJtagTargIntf.InitScript]
+// setup IVOPR
+// points to internal memory at 0x40000000
+SETSPR 0x3F 0x40000000 0xFFFFFFFF
+
+// disable watchdog
+SET SWT_SR 0xC520
+SET SWT_SR 0xD928
+SET SWT_CR 0xFF00000A
+
+// Oscillator select
+SET CGM_OCDS_SC 0x1000000
+SET CGM_OC_EN 0x1
+
+// enable all modes
+SET ME_MER 0x5FF
+
+// run mode
+SET ME_DRUN_MC 0x1F0032
+SET ME_RUN_PC0 0xFE
+
+// enable peripherals in run and low power modes
+SET ME_LP_PC0 0x500
+
+// enable clocks
+SET8 CGM_SC_DC0 0x80
+SET8 CGM_SC_DC1 0x80
+SET8 CGM_SC_DC2 0x80
+
+// setup clock monitor
+SET CMU_CSR 0x6
+SET CMU_LFREFR 0x1
+SET CMU_HFREFR 0xFFE
+
+// Make DRUN configuration active
+SET ME_MCTL 0x30005AF0
+SET ME_MCTL 0x3000A50F
+WAIT 0x5
+
+// setup pll to 48MHz
+SET FMPLL_CR 0x5300041 0xFFFFFFFF
+// run mode
+SET ME_DRUN_MC 0x1F00F4
+
+// Make DRUN configuration active
+SET ME_MCTL 0x30005AF0
+SET ME_MCTL 0x3000A50F
+WAIT 0x5
+
+// setup SSCM erro cfg for debug
+SET16 SSCM_ERROR 0x3 0x3
+
+[Controller0.BAMWriteFilter]
+Description=BAM WriteAccess Filter
+Range0Start=0xFFFFC000
+Range0Size=0x4000
+Enabled=1
+Handler=AccessFilter
+Mode=ReadOnly
+
+[Controller0.PFLASH]
+Enabled=1
+EnableMemtoolByDefault=1
+
+[Controller0.DFLASH]
+Enabled=1
+EnableMemtoolByDefault=1
+
+[Controller0.Core.PpcJtagTargIntf.OnStartScript]
+
+[Controller0.Core.PpcJtagTargIntf.OnHaltScript]
diff --git a/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/halconf.h b/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/halconf.h
new file mode 100644
index 0000000..6827953
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/halconf.h
@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM                  FALSE
+#endif
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/main.c b/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/main.c
new file mode 100644
index 0000000..f730fcf
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/main.c
@@ -0,0 +1,149 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "nil.h"
+#include "hal.h"
+#include "ch_test.h"
+
+/*
+ * LEDs blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   */
+  sdStart(&SD1, NULL);
+
+  while (true) {
+    unsigned i;
+
+    for (i = 0; i < 4; i++) {
+      palClearPad(PORT_E, PE_LED1);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT_E, PE_LED2);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT_E, PE_LED3);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT_E, PE_LED4);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_E, PE_LED1);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_E, PE_LED2);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_E, PE_LED3);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_E, PE_LED4);
+      chThdSleepMilliseconds(300);
+    }
+
+    for (i = 0; i < 4; i++) {
+      palTogglePort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) |
+                            PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4));
+      chThdSleepMilliseconds(500);
+      palTogglePort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) |
+                            PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4));
+      chThdSleepMilliseconds(500);
+    }
+
+    for (i = 0; i < 4; i++) {
+      palTogglePad(PORT_E, PE_LED1);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_E, PE_LED1);
+      palTogglePad(PORT_E, PE_LED2);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_E, PE_LED2);
+      palTogglePad(PORT_E, PE_LED3);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_E, PE_LED3);
+      palTogglePad(PORT_E, PE_LED4);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_E, PE_LED4);
+    }
+
+    for (i = 0; i < 4; i++) {
+      palClearPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED3));
+      palSetPort(PORT_E, PAL_PORT_BIT(PE_LED2) | PAL_PORT_BIT(PE_LED4));
+      chThdSleepMilliseconds(500);
+      palClearPort(PORT_E, PAL_PORT_BIT(PE_LED2) | PAL_PORT_BIT(PE_LED4));
+      palSetPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED3));
+      chThdSleepMilliseconds(500);
+    }
+
+    palSetPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) |
+                       PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4));
+  }
+}
+
+/*
+ * Tester thread.
+ */
+THD_WORKING_AREA(waThread2, 128);
+THD_FUNCTION(Thread2, arg) {
+
+  (void)arg;
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   */
+  sdStart(&SD1, NULL);
+
+  /* Welcome message.*/
+  chnWriteTimeout(&SD1, (uint8_t *)"Hello World!\r\n", 14, TIME_INFINITE);
+
+  /* Waiting for button push and activation of the test suite.*/
+  while (true) {
+    if (palReadPad(PORT_E, PE_BUTTON1))
+      test_execute((BaseSequentialStream *)&SD1);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Threads static table, one entry per thread. The number of entries must
+ * match NIL_CFG_NUM_THREADS.
+ */
+THD_TABLE_BEGIN
+THD_TABLE_ENTRY(waThread1, "blinker", Thread1, NULL)
+THD_TABLE_ENTRY(wa_test_support, "test_support", test_support, (void *)&nil.threads[2])
+THD_TABLE_ENTRY(waThread2, "tester", Thread2, NULL)
+THD_TABLE_END
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /* This is now the idle thread loop, you may perform here a low priority
+     task but you must never try to sleep or wait in this loop. Note that
+     this tasks runs at the lowest priority level so any instruction added
+     here will be executed after all other tasks have been started.*/
+  while (true) {
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/mcuconf.h b/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/mcuconf.h
new file mode 100644
index 0000000..0b48d33
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/mcuconf.h
@@ -0,0 +1,153 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * SPC560B/Cxx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 1...15       Lowest...Highest.
+ * DMA priorities:
+ * 0...15       Highest...Lowest.
+ */
+
+#define SPC560Dxx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define SPC5_NO_INIT                        FALSE
+#define SPC5_ALLOW_OVERCLOCK                FALSE
+#define SPC5_DISABLE_WATCHDOG               TRUE
+#define SPC5_FMPLL0_IDF_VALUE               1
+#define SPC5_FMPLL0_NDIV_VALUE              48
+#define SPC5_FMPLL0_ODF                     SPC5_FMPLL_ODF_DIV8
+#define SPC5_XOSCDIV_VALUE                  1
+#define SPC5_IRCDIV_VALUE                   1
+#define SPC5_PERIPHERAL1_CLK_DIV_VALUE      2
+#define SPC5_PERIPHERAL2_CLK_DIV_VALUE      2
+#define SPC5_PERIPHERAL3_CLK_DIV_VALUE      2
+#define SPC5_CLOCK_FAILURE_HOOK()           osalSysHalt("clock failure")
+
+#define SPC5_EMIOS0_GPRE_VALUE              20
+
+/*
+ * EDMA driver settings.
+ */
+#define SPC5_EDMA_CR_SETTING                (EDMA_CR_EMLM)
+#define SPC5_EDMA_GROUP0_PRIORITIES         0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+#define SPC5_EDMA_ERROR_IRQ_PRIO            12
+#define SPC5_EDMA_ERROR_HANDLER()           osalSysHalt("DMA failure")
+
+/*
+ * SERIAL driver system settings.
+ */
+#define SPC5_SERIAL_USE_LINFLEX0            TRUE
+#define SPC5_SERIAL_USE_LINFLEX1            FALSE
+#define SPC5_SERIAL_USE_LINFLEX2            FALSE
+#define SPC5_SERIAL_LINFLEX0_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX1_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX2_PRIORITY       8
+
+/*
+ * SPI driver system settings.
+ */
+#define SPC5_SPI_USE_DSPI0                  FALSE
+#define SPC5_SPI_USE_DSPI1                  FALSE
+#define SPC5_SPI_DMA_MODE                   SPC5_SPI_DMA_RX_ONLY
+#define SPC5_SPI_DSPI0_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3 | SPC5_MCR_PCSIS4 | SPC5_MCR_PCSIS5)
+#define SPC5_SPI_DSPI1_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3 | SPC5_MCR_PCSIS4)
+#define SPC5_SPI_DSPI0_TX1_DMA_CH_ID        4
+#define SPC5_SPI_DSPI0_TX2_DMA_CH_ID        5
+#define SPC5_SPI_DSPI0_RX_DMA_CH_ID         6
+#define SPC5_SPI_DSPI1_TX1_DMA_CH_ID        7
+#define SPC5_SPI_DSPI1_TX2_DMA_CH_ID        8
+#define SPC5_SPI_DSPI1_RX_DMA_CH_ID         9
+#define SPC5_SPI_DSPI0_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI1_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI0_IRQ_PRIO             10
+#define SPC5_SPI_DSPI1_IRQ_PRIO             10
+#define SPC5_SPI_DMA_ERROR_HOOK(spip)       osalSysHalt("DSPI DMA failure")
+
+/*
+ * ICU-PWM driver system settings.
+ */
+#define SPC5_ICU_USE_EMIOS0_CH0             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH1             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH2             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH3             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH4             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH5             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH6             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH7             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH24            FALSE
+
+#define SPC5_PWM_USE_EMIOS0_GROUP0          FALSE
+#define SPC5_PWM_USE_EMIOS0_GROUP1          FALSE
+
+#define SPC5_EMIOS0_GFR_F0F1_PRIORITY       8
+#define SPC5_EMIOS0_GFR_F2F3_PRIORITY       8
+#define SPC5_EMIOS0_GFR_F4F5_PRIORITY       8
+#define SPC5_EMIOS0_GFR_F6F7_PRIORITY       8
+#define SPC5_EMIOS0_GFR_F8F9_PRIORITY       8
+#define SPC5_EMIOS0_GFR_F10F11_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F12F13_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F14F15_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F16F17_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F18F19_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F20F21_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F22F23_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F24F25_PRIORITY     8
+
+#define SPC5_EMIOS0_START_PCTL              (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_EMIOS0_STOP_PCTL               (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+/*
+ * CAN driver system settings.
+ */
+#define SPC5_CAN_USE_FILTERS                FALSE
+
+#define SPC5_CAN_USE_FLEXCAN0               FALSE
+#define SPC5_CAN_FLEXCAN0_USE_EXT_CLK       FALSE
+#define SPC5_CAN_FLEXCAN0_PRIORITY          12
+#define SPC5_CAN_FLEXCAN0_START_PCTL        (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_CAN_FLEXCAN0_STOP_PCTL         (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+                                             
+/*
+* ADC driver system settings.
+*/
+#define SPC5_ADC_USE_ADC1                   FALSE
+#define SPC5_ADC_ADC1_CLK_FREQUENCY         HALF_PERIPHERAL_SET_CLOCK_FREQUENCY
+#define SPC5_ADC_ADC1_AUTO_CLOCK_OFF        FALSE
+#define SPC5_ADC_ADC1_WD_PRIORITY           12
+#define SPC5_ADC_ADC1_DMA_CH_ID             2
+#define SPC5_ADC_ADC1_DMA_IRQ_PRIO          12
+#define SPC5_ADC_ADC1_START_PCTL            (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_ADC_ADC1_STOP_PCTL             (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/nilconf.h b/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/nilconf.h
new file mode 100644
index 0000000..3566671
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/NIL-SPC560D-EVB/nilconf.h
@@ -0,0 +1,179 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    nilconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _NILCONF_H_
+#define _NILCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of user threads in the application.
+ * @note    This number is not inclusive of the idle thread which is
+ *          Implicitly handled.
+ */
+#define NIL_CFG_NUM_THREADS                 3
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name System timer settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define NIL_CFG_ST_RESOLUTION               32
+
+/**
+ * @brief   System tick frequency.
+ * @note    This value together with the @p NIL_CFG_ST_RESOLUTION
+ *          option defines the maximum amount of time allowed for
+ *          timeouts.
+ */
+#define NIL_CFG_ST_FREQUENCY                1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define NIL_CFG_ST_TIMEDELTA                0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define NIL_CFG_USE_EVENTS                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System assertions.
+ */
+#define NIL_CFG_ENABLE_ASSERTS              FALSE
+
+/**
+ * @brief   Stack check.
+ */
+#define NIL_CFG_ENABLE_STACK_CHECK          FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System initialization hook.
+ */
+#if !defined(NIL_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__)
+#define NIL_CFG_SYSTEM_INIT_HOOK() {                                        \
+}
+#endif
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define NIL_CFG_THREAD_EXT_FIELDS                                           \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ */
+#define NIL_CFG_THREAD_EXT_INIT_HOOK(tr) {                                  \
+  /* Add custom threads initialization code here.*/                         \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define NIL_CFG_IDLE_ENTER_HOOK() {                                         \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define NIL_CFG_IDLE_LEAVE_HOOK() {                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ */
+#if !defined(NIL_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
+#define NIL_CFG_SYSTEM_HALT_HOOK(reason) {                                  \
+}
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in nilcore.h).   */
+/*===========================================================================*/
+
+#endif  /* _NILCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/.cproject b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/.cproject
new file mode 100644
index 0000000..3405a35
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/.cproject
@@ -0,0 +1,57 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.665946016">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.665946016" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.665946016" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.665946016." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1131493307" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1131493307.1844928918" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1106552272" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1064008669" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.2048166271" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1577341141" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.841305605" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.954135725" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.287919901" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1061591135" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-SPC560B-EVB.null.2129661677" name="RT-SPC560B-EVB"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.665946016">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-SPC560B-EVB"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/.project b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/.project
new file mode 100644
index 0000000..5775679
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-SPC560B-EVB</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_EVB_SPC560B</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/Makefile b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/Makefile
new file mode 100644
index 0000000..0a4379a
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/Makefile
@@ -0,0 +1,188 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -mno-spe -msoft-float
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data.
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT =
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = no
+endif
+
+# If enabled, this option allows to compile the application in VLE mode.
+ifeq ($(USE_VLE),)
+  USE_VLE = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the optional exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/e200/compilers/GCC/mk/startup_spc560bxx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/boards/ST_EVB_SPC560B/board.mk
+include $(CHIBIOS)/os/hal/ports/SPC5/SPC560Bxx/platform.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/e200/compilers/GCC/mk/port.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/SPC560B60.ld
+
+# C sources here.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       $(CHIBIOS)/os/hal/lib/streams/memstreams.c \
+       $(CHIBIOS)/os/hal/lib/streams/chprintf.c \
+       $(CHIBIOS)/os/various/shell.c \
+       main.c
+
+# C++ sources here.
+CPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+#MCU  = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames
+MCU  = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames
+
+#TRGT = powerpc-eabi-
+TRGT = ppc-vle-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+MOT  = $(CP) -O srec
+BIN  = $(CP) -O binary
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/e200/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/UDE/debug.wsx b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/UDE/debug.wsx
new file mode 100644
index 0000000..386c0d3
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/UDE/debug.wsx
@@ -0,0 +1,273 @@
+<?xml version="1.0" encoding="ISO-8859-1"?>
+<stg format="2.0">
+	<OriginalWsp type="string">debug.wsx</OriginalWsp><BackupWspFlag type="flag">0</BackupWspFlag><UseWspCnt type="int">0</UseWspCnt><WspCloseCnt type="int">1</WspCloseCnt><ProdInfo type="bin" size="52">vQTv/gAAAQAXAAIA8QkPAAAABAAAAAAAPwAAAAAAAAAEAAAAAgAAAAAAAAAAAAAAAAAAAA==</ProdInfo><ProdInfoString type="string">4.0</ProdInfoString><CreationDate type="string">19.11.2012 16:18:08:999</CreationDate><MainFrame type="key"><PersistTreeRoot type="key"><DesktopState type="key"><Placement type="key"><MainFrame type="string">MCAAAAAAAAAAAAAABAAAAAAAPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPHHAAAAAAPBAAAAAADGFAAAAABCDAAAAA</MainFrame><WorkbookMode type="string">False</WorkbookMode><DockStateSaved type="string">True</DockStateSaved></Placement><DockState type="key"><Bars type="string">14</Bars><ScreenCX type="string">1680</ScreenCX><ScreenCY type="string">1050</ScreenCY><Bar-0 type="key"><BarID type="string">59393</BarID><Style type="string">32768</Style><ExStyle type="string">0</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">1000000</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">0</MRUHorzDockCX><MRUHorzDockCY type="string">0</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">0</DockingStyle><TypeID type="string">0</TypeID><ClassName type="string">UDEStatusBar</ClassName><WindowName type="string">For Help, press F1</WindowName><ResourceID type="string">0</ResourceID></Bar-0><Bar-1 type="key"><BarID type="string">59419</BarID><Bars type="string">11</Bars><Bar_0 type="string" name="Bar#0">0</Bar_0><Bar_1 type="string" name="Bar#1">59647</Bar_1><Bar_2 type="string" name="Bar#2">0</Bar_2><Bar_3 type="string" name="Bar#3">59399</Bar_3><Bar_4 type="string" name="Bar#4">59398</Bar_4><Bar_5 type="string" name="Bar#5">59397</Bar_5><Bar_6 type="string" name="Bar#6">59403</Bar_6><Bar_7 type="string" name="Bar#7">59401</Bar_7><Bar_8 type="string" name="Bar#8">59406</Bar_8><Bar_9 type="string" name="Bar#9">59402</Bar_9><Bar_10 type="string" name="Bar#10">0</Bar_10><Style type="string">0</Style><ExStyle type="string">0</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">0</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">0</MRUHorzDockCX><MRUHorzDockCY type="string">0</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">0</DockingStyle><TypeID type="string">0</TypeID><ClassName type="string">CUDEDockBar</ClassName><WindowName type="string"></WindowName><ResourceID type="string">0</ResourceID></Bar-1><Bar-2 type="key"><BarID type="string">59422</BarID><Bars type="string">3</Bars><Bar_0 type="string" name="Bar#0">0</Bar_0><Bar_1 type="string" name="Bar#1">9110</Bar_1><Bar_2 type="string" name="Bar#2">0</Bar_2><Style type="string">0</Style><ExStyle type="string">0</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">0</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">0</MRUHorzDockCX><MRUHorzDockCY type="string">0</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">0</DockingStyle><TypeID type="string">0</TypeID><ClassName type="string">CUDEDockBar</ClassName><WindowName type="string"></WindowName><ResourceID type="string">0</ResourceID></Bar-2><Bar-3 type="key"><BarID type="string">59420</BarID><Bars type="string">3</Bars><Bar_0 type="string" name="Bar#0">0</Bar_0><Bar_1 type="string" name="Bar#1">9100</Bar_1><Bar_2 type="string" name="Bar#2">0</Bar_2><Style type="string">0</Style><ExStyle type="string">0</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">0</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">0</MRUHorzDockCX><MRUHorzDockCY type="string">0</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">0</DockingStyle><TypeID type="string">0</TypeID><ClassName type="string">CUDEDockBar</ClassName><WindowName type="string"></WindowName><ResourceID type="string">0</ResourceID></Bar-3><Bar-4 type="key"><BarID type="string">59647</BarID><MRUWidth type="string">381</MRUWidth><Docking type="string">True</Docking><MRUDockID type="string">59419</MRUDockID><MRUDockLeftPos type="string">-1</MRUDockLeftPos><MRUDockTopPos type="string">-1</MRUDockTopPos><MRUDockRightPos type="string">1251</MRUDockRightPos><MRUDockBottomPos type="string">26</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12220</Style><ExStyle type="string">908</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">1000000</PctWidth><MRUFloatCX type="string">381</MRUFloatCX><MRUFloatCY type="string">27</MRUFloatCY><MRUHorzDockCX type="string">1252</MRUHorzDockCX><MRUHorzDockCY type="string">27</MRUHorzDockCY><MRUVertDockCX type="string">76</MRUVertDockCX><MRUVertDockCY type="string">511</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14947</TypeID><ClassName type="string">UDEMDIMenuBar</ClassName><WindowName type="string">Menu bar</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Menu bar</Title><Buttons type="string">BAAAAAAIAACAAAAAAIAADAAAAAAIAAEAAAAAAIAAFAAAAAAIAAGAAAAAAIAAHAAAAAAIAAIAAAAAAIAAJAAAAAAIAAKAAAAAAIAA</Buttons></ToolBarInfoEx></Bar-4><Bar-5 type="key"><BarID type="string">59398</BarID><XPos type="string">503</XPos><YPos type="string">26</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">503</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">614</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">15625</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">111</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Edit</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Edit</Title><NewButtons_BinCount type="string">2</NewButtons_BinCount><NewButtons_BinVal0 type="string">DCBOAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAACCBOAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAFCBOAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAIABOAAAAAAPPPPPPPPAAAAAAAAAA</NewButtons_BinVal0><NewButtons_BinVal1 type="string">AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAA</NewButtons_BinVal1></ToolBarInfoEx></Bar-5><Bar-6 type="key"><BarID type="string">59397</BarID><XPos type="string">614</XPos><YPos type="string">26</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">614</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">794</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">15625</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">180</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">File</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">File</Title><NewButtons_BinCount type="string">3</NewButtons_BinCount><NewButtons_BinVal0 type="string">AHHBAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAABHHBAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAACHHBAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAADHHBAAAAAAPPPPPPPPAAAAAAAAAA</NewButtons_BinVal0><NewButtons_BinVal1 type="string">AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAEHHBAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAFHHBAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAOKHBAAAAAABAAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAA</NewButtons_BinVal1><NewButtons_BinVal2 type="string">AAPPPPPPPPAAAAAAAA</NewButtons_BinVal2></ToolBarInfoEx></Bar-6><Bar-7 type="key"><BarID type="string">59403</BarID><XPos type="string">794</XPos><YPos type="string">26</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">794</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">928</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">1181049967</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">31250</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">134</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Config</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Config</Title><NewButtons_BinCount type="string">2</NewButtons_BinCount><NewButtons_BinVal0 type="string">GJHBAAAAAADAAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAAMMHBAAAAAAOPAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAANMHBAAAAAAAABAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAAFNHBAAAAAAGAAAAAAAKBDLFIMBFC</NewButtons_BinVal0><NewButtons_BinVal1 type="string">NFHJBEGJFDMJNFCMOIPKHNAAAAAAAAPPPPPPPPAAAAAAAAINHBAAAAAACBAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAA</NewButtons_BinVal1></ToolBarInfoEx></Bar-7><Bar-8 type="key"><BarID type="string">59401</BarID><XPos type="string">928</XPos><YPos type="string">26</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">928</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">1407</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">151587341</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">62500</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">479</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Views</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Views</Title><NewButtons_BinCount type="string">6</NewButtons_BinCount><NewButtons_BinVal0 type="string">JJHBAAAAAAFBAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAAKJHBAAAAAAPAAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAAMJHBAAAAAAGBAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAANKHBAAAAAAAAAAAAAAAGKBFNONHL</NewButtons_BinVal0><NewButtons_BinVal1 type="string">AOENBBBJCBAABADAJECGGLAAAAAAAAPPPPPPPPAAAAAAAAALHBAAAAAAKAAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAACLHBAAAAAAMFAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAADLHBAAAAAAKFAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAA</NewButtons_BinVal1><NewButtons_BinVal2 type="string">AAPPPPPPPPAAAAAAAAFLHBAAAAAANCAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAAGLHBAAAAAAMDAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAAHLHBAAAAAAGEAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAAAMHBAAAAAA</NewButtons_BinVal2><NewButtons_BinVal3 type="string">KAAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAABMHBAAAAAAEBAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAACMHBAAAAAAJBAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAADMHBAAAAAALBAAAAAAKEMNADOLNFNPBMHEJJNE</NewButtons_BinVal3><NewButtons_BinVal4 type="string">MIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAAEMHBAAAAAAAFAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAAFMHBAAAAAAICAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAAHMHBAAAAAANEEAAAAAJEOEILFFBLMIPBEEPLLMEDEOPKHPBGJHAAAAAAAAPPPPPPPP</NewButtons_BinVal4><NewButtons_BinVal5 type="string">AAAAAAAAIMHBAAAAAAGFEAAAAAJEOEILFFBLMIPBEEPLLMEDEOPKHPBGJHAAAAAAAAPPPPPPPPAAAAAAAAJMHBAAAAAAAGEAAAAAJEOEILFFBLMIPBEEPLLMEDEOPKHPBGJHAAAAAAAAPPPPPPPPAAAAAAAALMHBAAAAAAGEAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAA</NewButtons_BinVal5></ToolBarInfoEx></Bar-8><Bar-9 type="key"><BarID type="string">59406</BarID><XPos type="string">1407</XPos><YPos type="string">26</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">1407</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">1653</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">125000</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">246</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Macro</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Macro</Title><NewButtons_BinCount type="string">2</NewButtons_BinCount><NewButtons_BinVal0 type="string">DKHBAAAAAALDAAAAAAGDHJMPFPDOOJLAGELLAIHGBMMEFJBIPLAAAAAAAAPPPPPPPPAAAAAAAAEKHBAAAAAAAEAAAAAAGDHJMPFPDOOJLAGELLAIHGBMMEFJBIPLAAAAAAAAPPPPPPPPAAAAAAAAGKHBAAAAAAMDAAAAAAGDHJMPFPDOOJLAGELLAIHGBMMEFJBIPLAAAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAAA</NewButtons_BinVal0><NewButtons_BinVal1 type="string">AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAMKHBAAAACAGJAAAAAAAAAANMAJBFNENHHACJPEILAJFEFEECLCDPKCBAAAAAAAKAAAAAAANAAAAAAAFFEEFEHFPGCHLGDHAHBGDGFGAA</NewButtons_BinVal1></ToolBarInfoEx></Bar-9><Bar-10 type="key"><BarID type="string">59399</BarID><YPos type="string">26</YPos><MRUWidth type="string">504</MRUWidth><Docking type="string">True</Docking><MRUDockID type="string">59419</MRUDockID><MRUDockLeftPos type="string">-1</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">503</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">250000</PctWidth><MRUFloatCX type="string">504</MRUFloatCX><MRUFloatCY type="string">30</MRUFloatCY><MRUHorzDockCX type="string">504</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">123</MRUVertDockCX><MRUVertDockCY type="string">90</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Debug</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Debug</Title><NewButtons_BinCount type="string">5</NewButtons_BinCount><NewButtons_BinVal0 type="string">BLHBAAAAAAIBAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAAELHBAAAAAAOFAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAAILHBAAAAAAHAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAJLHBAAAAAAJAAAAAAABINLNCJGPD</NewButtons_BinVal0><NewButtons_BinVal1 type="string">KECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAKLHBAAAAAAKAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAALLHBAAAAAALAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAMLHBAAAAAAIAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAA</NewButtons_BinVal1><NewButtons_BinVal2 type="string">AAPPPPPPPPAAAAAAAANLHBAAAAAABCDAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAOLHBAAAAAANAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAPLHBAAAAAAMAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAA</NewButtons_BinVal2><NewButtons_BinVal3 type="string">PPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAANHBAAAAAADAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAABNHBAAAAAAGAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAA</NewButtons_BinVal3><NewButtons_BinVal4 type="string">AAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAACNHBAAAACAKKAAAAAAAAAADHHMLHLPEKIIOMOEJLGLBHJIBGLAHAFDBAAAAAAADAAAAAAAFAAAAAAADEPGCHFGAAENHBAAAAAADAAAAAAAKBDLFIMBFCNFHJBEGJFDMJNFCMOIPKHNAAAAAAAAPPPPPPPPAAAAAAAA</NewButtons_BinVal4></ToolBarInfoEx></Bar-10><Bar-11 type="key"><BarID type="string">59402</BarID><XPos type="string">1653</XPos><YPos type="string">26</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">1653</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">1795</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">500000</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">142</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Tools</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Tools</Title><NewButtons type="string">DNHBAAAACAEGAAAAAAAAAAGEAOMHHDMDCIFAKEIIICDBCMNFEDNFHHBAAAAAAAGAAAAAAAFAAAAAAADEPGCHFGAAHNHBAAAAAABOAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAA</NewButtons></ToolBarInfoEx></Bar-11><Bar-12 type="key"><BarID type="string">9110</BarID><XPos type="string">1</XPos><YPos type="string">5</YPos><Docking type="string">True</Docking><MRUDockID type="string">59422</MRUDockID><MRUDockLeftPos type="string">1</MRUDockLeftPos><MRUDockTopPos type="string">5</MRUDockTopPos><MRUDockRightPos type="string">1252</MRUDockRightPos><MRUDockBottomPos type="string">155</MRUDockBottomPos><MRUFloatStyle type="string">4</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">36756</Style><ExStyle type="string">3889</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">1000000</PctWidth><MRUFloatCX type="string">300</MRUFloatCX><MRUFloatCY type="string">180</MRUFloatCY><MRUHorzDockCX type="string">1251</MRUHorzDockCX><MRUHorzDockCY type="string">150</MRUHorzDockCY><MRUVertDockCX type="string">300</MRUVertDockCX><MRUVertDockCY type="string">180</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14948</TypeID><ClassName type="string">CTabWndControlBar</ClassName><WindowName type="string">Tab Window Bar 0</WindowName><ResourceID type="string">0</ResourceID><ViewServerInstCnt type="string">-1</ViewServerInstCnt><ViewServerMultiInst type="string">False</ViewServerMultiInst><ViewServerType type="string">UDEDesktop Standard Bars</ViewServerType><ViewServerInstName type="string">Tab Window Bar 0</ViewServerInstName><ViewServerDbgSrvCfg type="string">UDEDesktop</ViewServerDbgSrvCfg><ExDockRow type="string">0</ExDockRow><ExDockCol type="string">0</ExDockCol><ExDockHeight type="string">150</ExDockHeight><NoOfDockBars type="string">1</NoOfDockBars></Bar-12><Bar-13 type="key"><BarID type="string">9100</BarID><Visible type="string">False</Visible><XPos type="string">0</XPos><YPos type="string">0</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">0</MRUDockLeftPos><MRUDockTopPos type="string">0</MRUDockTopPos><MRUDockRightPos type="string">0</MRUDockRightPos><MRUDockBottomPos type="string">0</MRUDockBottomPos><MRUFloatStyle type="string">4</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">8084</Style><ExStyle type="string">3889</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">1000000</PctWidth><MRUFloatCX type="string">300</MRUFloatCX><MRUFloatCY type="string">180</MRUFloatCY><MRUHorzDockCX type="string">300</MRUHorzDockCX><MRUHorzDockCY type="string">180</MRUHorzDockCY><MRUVertDockCX type="string">150</MRUVertDockCX><MRUVertDockCY type="string">180</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14948</TypeID><ClassName type="string">CUdeProjectWspBar</ClassName><WindowName type="string">Project Workspace Bar</WindowName><ResourceID type="string">0</ResourceID><ViewServerInstCnt type="string">-1</ViewServerInstCnt><ViewServerMultiInst type="string">False</ViewServerMultiInst><ViewServerType type="string">UDEDesktop Standard Bars</ViewServerType><ViewServerInstName type="string">Project Workspace Bar</ViewServerInstName><ViewServerDbgSrvCfg type="string">UDEDesktop</ViewServerDbgSrvCfg><ExDockRow type="string">0</ExDockRow><ExDockCol type="string">0</ExDockCol><ExDockHeight type="string">0</ExDockHeight><NoOfDockBars type="string">1</NoOfDockBars></Bar-13></DockState><ToolBarMgr type="key"><ToolTips type="string">True</ToolTips><CoolLook type="string">True</CoolLook><LargeButtons type="string">False</LargeButtons></ToolBarMgr></DesktopState></PersistTreeRoot><StdTargetManagerWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">21.11.2012 14:43:52:278</FrameCreated><ViewSrv type="key"><TargetBrowserView type="key"><SplitterRatio type="int">48</SplitterRatio></TargetBrowserView></ViewSrv><NETFrameMode type="int">77824</NETFrameMode><NETFrameSaveIndex type="int">1</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">1</CommonVisibilityGroup><VisibilityGroup_1 type="string">WorkspaceManager</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdTargetManagerWin><StdUDEMessageWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">19.11.2012 16:28:52:057</FrameCreated><ViewSrv type="key"><LogWin type="key"><Index type="key"><Width type="bin" size="8">MgAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Index><Type type="key"><Width type="bin" size="8">ZAAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Type><Time type="key"><Width type="bin" size="8">ZAAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Time><Src type="key"><Width type="bin" size="8">lgAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Src><Msg type="key"><Width type="bin" size="8">6AMAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Msg></LogWin><CmdWin type="key"><History type="key"/></CmdWin></ViewSrv><FrameDockState type="flag">1</FrameDockState><FrameMode type="int">3</FrameMode><NETFrameMode type="int">90112</NETFrameMode><NETFrameSaveIndex type="int">0</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">1</CommonVisibilityGroup><VisibilityGroup_1 type="string">WorkspaceManager</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdUDEMessageWin><StdUDECmdWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDECmdWin><UDETraceWin2 type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDETraceWin2><StdUDEWspHTMLView type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEWspHTMLView><Tab_Window_Bar_0 type="key" name="Tab Window Bar 0"><ProjectOpenFlag type="flag">1</ProjectOpenFlag><FrameDockState type="flag">1</FrameDockState><ProjectLastActivePage type="int">0</ProjectLastActivePage></Tab_Window_Bar_0><Project_Workspace_Bar type="key" name="Project Workspace Bar"><ProjectOpenFlag type="flag">0</ProjectOpenFlag><FrameDockState type="flag">1</FrameDockState><ProjectLastActivePage type="int">0</ProjectLastActivePage></Project_Workspace_Bar><TraceFramework type="key"/><SelectedPrinter type="string">\\napnt002.nap.st.com\NAPPRT0001</SelectedPrinter><VisibilityGroupsMgr type="key"><Core type="key"><UsePrimaryGroup type="flag">0</UsePrimaryGroup><UseLastUsedGroup type="flag">0</UseLastUsedGroup></Core><VisibilityGroup_1 type="key"><NoOfDebugger type="int">0</NoOfDebugger><DefaultGroupName type="string">WorkspaceManager</DefaultGroupName><GroupName type="string">WorkspaceManager</GroupName><PrimaryGroup type="flag">0</PrimaryGroup><CommonGroup type="flag">1</CommonGroup></VisibilityGroup_1><VisibilityGroup_2 type="key"><Debugger_1 type="string">Core</Debugger_1><NoOfDebugger type="int">1</NoOfDebugger><DefaultGroupName type="string">Target0.Controller0.Core</DefaultGroupName><GroupName type="string">Target0.Controller0.Core</GroupName><PrimaryGroup type="flag">1</PrimaryGroup><CommonGroup type="flag">0</CommonGroup></VisibilityGroup_2><NoOfDefaultVisibilityGroups type="int">2</NoOfDefaultVisibilityGroups><NoOfVisibilityGroups type="int">2</NoOfVisibilityGroups><EnableUserSwitchOfVisibilityGroups type="flag">0</EnableUserSwitchOfVisibilityGroups><EnableDebuggerSwitchOfVisibilityGroups type="flag">0</EnableDebuggerSwitchOfVisibilityGroups><VisibilityGroupsCtrlTBCat type="int">7</VisibilityGroupsCtrlTBCat><EnableVisibilityGroups type="flag">0</EnableVisibilityGroups></VisibilityGroupsMgr><NETPlacementRoot type="key"><FormsData type="innerxml"><FormsData><Bounds><X>143</X><Y>83</Y><Width>1295</Width><Height>778</Height></Bounds><ClientSize><Width>1279</Width><Height>740</Height></ClientSize><State>Normal</State></FormsData></FormsData><DockingManagerControlData type="innerxml"><DockingManagerControlData><MDIActive>false</MDIActive><DocumentDockStyle>Top</DocumentDockStyle><DockingControls><DockingControlData><DockedDimension>1271</DockedDimension><Cancelled>false</Cancelled><DockingType>Bottom</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>true</Selected></DockingControlData><DockingControlData><DockedDimension>417</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>true</Selected></DockingControlData><DockingControlData><DockedDimension>417</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>1</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>0</DockedDimension><Cancelled>false</Cancelled><DockingType>Top</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>-1</PanelIndex><ContainerType>TabbedDocument</ContainerType><Selected>true</Selected></DockingControlData><DockingControlData><DockedDimension>417</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>2</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>417</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>3</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData></DockingControls><LeftDockingContainerControlData><DockingContainerControlData><Tabbed>true</Tabbed><Dimension>556</Dimension></DockingContainerControlData></LeftDockingContainerControlData><RightDockingContainerControlData><DockingContainerControlData><Tabbed>false</Tabbed><Dimension>200</Dimension></DockingContainerControlData></RightDockingContainerControlData><TopDockingContainerControlData><DockingContainerControlData><Tabbed>false</Tabbed><Dimension>200</Dimension></DockingContainerControlData></TopDockingContainerControlData><BottomDockingContainerControlData><DockingContainerControlData><Tabbed>true</Tabbed><Dimension>200</Dimension></DockingContainerControlData></BottomDockingContainerControlData><TabbedDocumentContainerControlData><TabbedDocumentContainerControlData><Selected>true</Selected><SplitterSize>100</SplitterSize></TabbedDocumentContainerControlData></TabbedDocumentContainerControlData></DockingManagerControlData></DockingManagerControlData><ToolbarControlData type="innerxml"><ToolbarControlData><ShowPanelShortcuts>true</ShowPanelShortcuts><ShowToolItemMessages>true</ShowToolItemMessages><TopContainer><PanelBounds><X>0</X><Y>0</Y><Width>1279</Width><Height>74</Height></PanelBounds><ToolBars><ToolbarPersistData><Bounds><X>0</X><Y>0</Y><Width>1279</Width><Height>24</Height></Bounds><Name>Platform Main Menu</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>4</X><Y>24</Y><Width>95</Width><Height>25</Height></Bounds><Name>Edit Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Workspace_0x1779</Name><Visible>true</Visible><Text>Cut</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177A</Name><Visible>true</Visible><Text>Copy</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177B</Name><Visible>true</Visible><Text>Paste</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>99</X><Y>24</Y><Width>276</Width><Height>25</Height></Bounds><Name>Macro Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x3B_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Run Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x40_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Debug Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Break Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3C_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Reload Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Ctrl_{4D5190CD-077D-4F92-B890-4545242BF32A}_UDEWorkspace</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>375</X><Y>24</Y><Width>210</Width><Height>25</Height></Bounds><Name>File Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Workspace_0x1770</Name><Visible>true</Visible><Text>New Workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1771</Name><Visible>true</Visible><Text>Open workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1772</Name><Visible>true</Visible><Text>Save workspace as</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1773</Name><Visible>true</Visible><Text>Save workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1774</Name><Visible>true</Visible><Text>Close workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177F</Name><Visible>true</Visible><Text>Export view content</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1778</Name><Visible>true</Visible><Text>Print</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Load Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>585</X><Y>24</Y><Width>440</Width><Height>25</Height></Bounds><Name>Views Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x4_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Target Browser</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x15_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Diagnostic Message Viewer</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xF_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Console</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x0_{DED51A60-E0B7-11D4-9112-0001034962B6}</Name><Visible>true</Visible><Text>CPU Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1E_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Explore Symbols</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5C_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Single Program Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5A_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Disassembly Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x2D_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show Special Function Register</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3C_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Locals</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x46_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Watch</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Simulated I/O</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x14_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>UDE HTML</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x19_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Array Chart</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1B_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Time Traced Signal Chart</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x50_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>IP Trace Profiling</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x28_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Memory</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x46_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Call Stack</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>3</X><Y>49</Y><Width>509</Width><Height>25</Height></Bounds><Name>Debug Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x18_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show IP</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5E_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show program code</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x7_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Start Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x9_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Over</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Into</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xB_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Out</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x8_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Run Cursor</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x321_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Break Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xD_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Reset</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xC_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Restart Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Breakpoints</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x6_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Toggle Break</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Ctrl_{FB7BC773-88A4-4ECE-B9B6-7189610B0735}_Core</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{1C85B31A-5D25-4197-9635-9C5DC28EAFD7}</Name><Visible>true</Visible><Text>Trigger setup</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>512</X><Y>49</Y><Width>141</Width><Height>25</Height></Bounds><Name>Config Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x3_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Target Configuration</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xFE_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Connect Target</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x100_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Disconnect Target</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x6_{1C85B31A-5D25-4197-9635-9C5DC28EAFD7}</Name><Visible>true</Visible><Text>Setup Target Interface</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x12_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>MCU Run Control</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>653</X><Y>49</Y><Width>151</Width><Height>25</Height></Bounds><Name>Tools Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Ctrl_{377CE046-823C-4A05-8828-13C25D345D77}_Core</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xE1_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Execution Time Setup</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>100</Y><Width>26</Width><Height>25</Height></Bounds><Name>Show Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>200</Y><Width>26</Width><Height>25</Height></Bounds><Name>Window Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>225</Y><Width>26</Width><Height>25</Height></Bounds><Name>Workspace Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>275</Y><Width>26</Width><Height>25</Height></Bounds><Name>Help Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData></ToolBars></TopContainer><BottomContainer><PanelBounds><X>0</X><Y>717</Y><Width>1279</Width><Height>23</Height></PanelBounds><ToolBars><ToolbarPersistData><Bounds><X>0</X><Y>0</Y><Width>1279</Width><Height>23</Height></Bounds><Name>Platform Status Bar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData/></ToolbarPersistData></ToolBars></BottomContainer><LeftContainer><PanelBounds><X>0</X><Y>74</Y><Width>0</Width><Height>643</Height></PanelBounds><ToolBars/></LeftContainer><RightContainer><PanelBounds><X>1279</X><Y>74</Y><Width>0</Width><Height>643</Height></PanelBounds><ToolBars/></RightContainer></ToolbarControlData></ToolbarControlData></NETPlacementRoot></MainFrame><INI_SECTION type="key"><Macro type="key"><MacroLib type="string">..\..\..\..\..\Program Files\pls\UDE 4.0\StdLibrary.mso</MacroLib></Macro><Loader type="key"><LOADER_REGKEY_WSP type="string">{866f82d3-fac5-43cd-8a82-0af01e46e2c5}</LOADER_REGKEY_WSP></Loader><PLACEMENT type="key"><SFRSelectDlg type="string">669,1006,350,661</SFRSelectDlg></PLACEMENT><EXTRAVALUE type="key"><SFRSelectDlg type="int">0</SFRSelectDlg></EXTRAVALUE></INI_SECTION><AddOns type="key"><UDE.Script type="key"><MacroGuiEntries type="key"><LastScriptFilePath type="string">..\..\..\..\..\Documents and Settings\disiriog\My Documents\pls\UDE 4.0</LastScriptFilePath><Macro_12_07_13_10_56_29_0 type="key"><ScriptDescription type="string">The script contains a collection of macros to save memory content into different file formats 
+and fill target memory ranges</ScriptDescription><ScriptPath type="string">V:\UDE\AddOns\Macro\MacroLibrary\StdMacros1.dsm</ScriptPath><ScriptSource type="string">'	
+'	$Header: /Ude/AddOns/Macro/MacroLibrary/StdMacros.dsm 3     30.04.04 9:34 Weisses $
+'_______________________________________________________
+'
+'	universal debug engine
+'	 
+'	Standard command line macros - part 1 
+'
+'	pls Development Tools 1999-2004
+'
+'   28.04.04    SW     correction for UDE 1.10
+'   03.06.03    SW     initial version
+'_______________________________________________________
+
+'_______________________________________________________
+'
+'	UnAss command line function
+' 
+'	generates disassembly file 
+'
+'	command line UnAss output-file range1 [range2] [range3] .....
+'	range description:
+'		C:&lt;startaddress&gt;,&lt;length&gt; or	- code
+'		DB:&lt;startaddress&gt;,&lt;length&gt; or	- data byte
+'		DW:&lt;startaddress&gt;,&lt;length&gt; or	- data word
+'		DD:&lt;startaddress&gt;,&lt;length&gt; or	- data dword
+'_______________________________________________________
+
+Sub UnAss(File,ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	If IsNumeric(File) Then
+	  	MsgBox "File parameter wrong - " &amp; File
+		Exit Sub 		
+	End If
+	DisASMObj.OutputPath = CStr(File)
+	bRetVal = DisASMObj.CreateStream(True,"UDE Disassembler output of current Program",False)
+	If bRetVal = True Then
+		ParmeterCnt = ParameterObj.ParameterCount
+		If ParmeterCnt = 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		RangeCnt = ParmeterCnt/3
+		ParamIndex = 0
+		For Range = 0 To RangeCnt -1 
+			KindOfRange = CStr(ParameterObj.Parameter(ParamIndex)) 
+			KindOfRange = UCase(KindOfRange)
+			Address = CLng(ParameterObj.Parameter(ParamIndex +1))		
+			Length = CLng(ParameterObj.Parameter(ParamIndex +2))
+			ParamIndex = ParamIndex +3
+			If IsNumeric(KindOfRange) Then
+				If KindOfRange = 12 Then
+ 					DisASMObj.AddRange Address,Length,1
+				ElseIf KindOfRange = 219 Then
+ 					DisASMObj.AddRange Address,Length,2
+				ElseIf KindOfRange = 221 Then
+ 					DisASMObj.AddRange Address,Length,4
+				Else
+	  				MsgBox "Invalid range type " &amp; KindOfRange &amp;  "of range " &amp; Range +1
+					Exit Sub 		
+			 	End If
+			Else
+				If KindOfRange = "C" Then
+ 					DisASMObj.AddRange Address,Length,1
+				ElseIf KindOfRange = "DB" Then
+ 					DisASMObj.AddRange Address,Length,2
+				ElseIf KindOfRange = "DW" Then
+ 					DisASMObj.AddRange Address,Length,3
+				ElseIf KindOfRange = "DD" Then
+ 					DisASMObj.AddRange Address,Length,4
+				Else
+	  				MsgBox "Invalid range type " &amp; KindOfRange &amp;  "of range " &amp; Range +1
+					Exit Sub 		
+				End If
+			End If
+		Next
+		DisASMObj.HexFileModeFlag = False
+		DisASMObj.ListModeFlag = False
+		DisASMObj.WriteAllRanges(False)
+	End If
+
+End Sub
+
+'_______________________________________________________
+'
+'	SaveHEX command line function
+' 
+'	generates intel-HEX file 
+'
+'	command line SaveHex output-file range1 [range2] [range3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub SaveHEX(File,ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	If IsNumeric(File) Then
+	  	MsgBox "File parameter wrong - " &amp; File
+		Exit Sub 		
+	End If
+	DisASMObj.OutputPath = CStr(File)
+	bRetVal = DisASMObj.CreateStream(True,"UDE generated intel-Hex file of current Program",False)
+	If bRetVal = True Then
+		ParmeterCnt = ParameterObj.ParameterCount
+		If ParmeterCnt = 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		If ( ParmeterCnt Mod 2 ) &lt;&gt; 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		RangeCnt = ParmeterCnt/2
+		ParamIndex = 0
+		For Range = 0 To RangeCnt -1 
+			Address = CLng(ParameterObj.Parameter(ParamIndex))		
+			Length = CLng(ParameterObj.Parameter(ParamIndex +1))
+			ParamIndex = ParamIndex +2
+ 			DisASMObj.AddRange Address,Length,0
+		Next
+		DisASMObj.HexFileModeFlag = True
+		DisASMObj.WriteAllRanges(False)
+	End If
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillByte command line function
+' 
+'	fills memory range with byte pattern 
+'
+'	command line FillByte range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillByte(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.ByteArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1))
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillWord command line function
+' 
+'	fills memory range with word pattern 
+'
+'	command line FillWord range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillWord(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.WordArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1)/2)
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillDWord command line function
+' 
+'	fills memory range with dword pattern 
+'
+'	command line FillDWord range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillDWord(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.DWordArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1)/4)
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub</ScriptSource><ScriptArchitecture type="int">63</ScriptArchitecture><ScriptEngine type="string">VBScript</ScriptEngine><MacroFileTime type="string">24.11.2006 14:43:20:000</MacroFileTime><ScriptFromStg type="flag">1</ScriptFromStg><LocalComputerName type="string">WS_CORE_DUO</LocalComputerName><ExternalScriptPath type="string"></ExternalScriptPath><NextNodeName type="string">Macro_27_02_14_16_19_55_0</NextNodeName><UnAss type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute UnAss ..</MenuString><ToolTipString type="string">Macro UnAss</ToolTipString><MessageString type="string">Execute macro UnAss</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">2</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></UnAss><SaveHEX type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute SaveHEX ..</MenuString><ToolTipString type="string">Macro SaveHEX</ToolTipString><MessageString type="string">Execute macro SaveHEX</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">2</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></SaveHEX><FillByte type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillByte ..</MenuString><ToolTipString type="string">Macro FillByte</ToolTipString><MessageString type="string">Execute macro FillByte</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillByte><FillWord type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillWord ..</MenuString><ToolTipString type="string">Macro FillWord</ToolTipString><MessageString type="string">Execute macro FillWord</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillWord><FillDWord type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillDWord ..</MenuString><ToolTipString type="string">Macro FillDWord</ToolTipString><MessageString type="string">Execute macro FillDWord</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillDWord><NoOfFunctions type="int">5</NoOfFunctions></Macro_12_07_13_10_56_29_0></MacroGuiEntries><LastSelectedMacro type="string"></LastSelectedMacro></UDE.Script></AddOns><MultiCoreRunControl type="key"><NoOfRunCtrlGroups type="int">0</NoOfRunCtrlGroups></MultiCoreRunControl><Core type="key"><ViewSrv type="key"><PowerPcCpuWin type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW type="key"><FrameCreated type="string">21.11.2012 14:17:23:645</FrameCreated><ViewSrv type="key"/><NETFrameMode type="int">77827</NETFrameMode><NETFrameSaveIndex type="int">5</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW type="int">0</SAVED_VIEW></PowerPcCpuWin><StdUDESymbolExplWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">20.11.2012 16:19:48:344</FrameCreated><ViewSrv type="key"/><NETFrameMode type="int">77826</NETFrameMode><NETFrameSaveIndex type="int">4</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdUDESymbolExplWin><StdUDEProgWin type="key"><OPEN_VIEW00 type="key"><FrameCreated type="string">21.11.2012 12:22:49:573</FrameCreated><ViewSrv type="key"/><SourceFile type="string">..\main.c</SourceFile><Placement type="string">1,0,0,353,1094</Placement><FrameMode type="int">0</FrameMode><FrameDockState type="flag">0</FrameDockState><FrameDockFloatState type="flag">1</FrameDockFloatState><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">3</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt><SourceFileInstFlag type="int">1</SourceFileInstFlag></OPEN_VIEW00><OPEN_VIEW01 type="key"><FrameCreated type="string">13.06.2013 14:53:23:258</FrameCreated><ViewSrv type="key"/><SourceFile type="string">..\..\..\os\hal\src\hal.c</SourceFile><Placement type="string">1,49,63,402,1157</Placement><FrameMode type="int">0</FrameMode><FrameDockState type="flag">0</FrameDockState><FrameDockFloatState type="flag">1</FrameDockFloatState><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">6</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW01><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW00 type="int">0</SAVED_VIEW00><SAVED_VIEW01 type="int">2</SAVED_VIEW01><OPEN_VIEW02 type="key"><FrameCreated type="string">22.11.2012 11:31:36:807</FrameCreated><ViewSrv type="key"/><SourceFile type="string">..\..\..\os\hal\platforms\SPC5xx\SIUL_v1\pal_lld.c</SourceFile><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">4</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW02><SAVED_VIEW02 type="int">1</SAVED_VIEW02><OPEN_VIEW03 type="key"><FrameCreated type="string">21.11.2012 14:44:22:506</FrameCreated><ViewSrv type="key"/><SourceFile type="string">..\..\..\os\kernel\src\chsys.c</SourceFile><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">6</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW03><SAVED_VIEW03 type="int">3</SAVED_VIEW03></StdUDEProgWin><StdUDESFRView type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW00 type="key"><FrameCreated type="string">21.11.2012 14:14:46:537</FrameCreated><ViewSrv type="key"><SFRView type="key"><NumberOfBitFieldsPerRow type="bin" size="8">AwAAAA==</NumberOfBitFieldsPerRow><BitfieldValueMode type="bin" size="8">AQAAAA==</BitfieldValueMode><NameWidth type="bin" size="8">kAAAAA==</NameWidth><ValueWidth type="bin" size="8">YAAAAA==</ValueWidth><Bitfield1Width type="bin" size="8">TgAAAA==</Bitfield1Width><Value1Width type="bin" size="8">jQAAAA==</Value1Width><Bitfield2Width type="bin" size="8">TgAAAA==</Bitfield2Width><Value2Width type="bin" size="8">jQAAAA==</Value2Width><Bitfield3Width type="bin" size="8">TgAAAA==</Bitfield3Width><Value3Width type="bin" size="8">jgAAAA==</Value3Width><Bitfield4Width type="bin" size="8">AAAAAA==</Bitfield4Width><Value4Width type="bin" size="8">AAAAAA==</Value4Width><TopIndex type="bin" size="8">AAAAAA==</TopIndex><CaretIndex type="bin" size="8">AAAAAA==</CaretIndex></SFRView></ViewSrv><NETFrameMode type="int">77825</NETFrameMode><NETFrameSaveIndex type="int">2</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW00><SAVED_VIEW00 type="int">0</SAVED_VIEW00><OPEN_VIEW01 type="key"/></StdUDESFRView><StdUDELocalsWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS><OPEN_VIEW type="key"><FrameCreated type="string">21.11.2012 14:10:10:424</FrameCreated><ViewSrv type="key"><NameWidth type="int">538</NameWidth><AddressWidth type="int">0</AddressWidth><ValueWidth type="int">360</ValueWidth><Value2Width type="int">0</Value2Width><MinMaxWidth type="int">0</MinMaxWidth></ViewSrv><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">5</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW type="int">0</SAVED_VIEW></StdUDELocalsWin><StdUDEWatchWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEWatchWin><StdUDESimIOWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDESimIOWin><StdUDEHtmlDocWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEHtmlDocWin><StdUDEGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEGraphWin><StdUDETimeSampleGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDETimeSampleGraphWin><UDEProfilingWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDEProfilingWin><StdUDEMemWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEMemWin><StdUDEIPTraceGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEIPTraceGraphWin><UDETraceCoverageWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDETraceCoverageWin><UDETraceProfilingWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDETraceProfilingWin><UDEStackWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDEStackWin></ViewSrv><UDE.StdDbgSrv type="key"><INI_SECTION type="key"><System type="key"><MIXEDMODE type="string">OFF</MIXEDMODE></System></INI_SECTION><UDE.PowerPcArchSrv type="key"><UDE.PpcJtagTargIntf type="key"><NewWorkspace type="flag">0</NewWorkspace></UDE.PpcJtagTargIntf></UDE.PowerPcArchSrv><UDE.UDESymbol type="key"><DefaultBinFileDir type="string">..\build</DefaultBinFileDir><BinFileDialogParam type="key"><Filter type="int">1</Filter></BinFileDialogParam><BinaryFiles type="key"><Number type="int">1</Number><BinaryFile1 type="key"><FullPath type="string">..\build\ch.elf</FullPath><SourceAliases type="key"/><Breakpoints type="key"><Breakpoint1 type="string">Software;enabled;0;disabled;'main {C:\ChibiStudio\workspace\SPC5\demos\SPC560Bxx OS-Less Test Application\main.c} .25';main.c;1;0;;$disabled; ;disabled; ;</Breakpoint1><Number type="int">1</Number></Breakpoints></BinaryFile1><BinaryFile-1 type="key"/></BinaryFiles><MultiCoreLoader type="key"><Number type="int">0</Number></MultiCoreLoader><ExpressionClipboard type="key"><Number type="int">0</Number></ExpressionClipboard></UDE.UDESymbol><STG_ADDON_PROF type="key"><UDE_Graphwin_Trace_AddOn type="key" name="UDE Graphwin Trace AddOn"><LOAD_STATE type="flag">0</LOAD_STATE></UDE_Graphwin_Trace_AddOn><UDELicense_Server type="key" name="UDELicense Server"><LOAD_STATE type="flag">1</LOAD_STATE></UDELicense_Server><UDEMemtool type="key"><LOAD_STATE type="flag">1</LOAD_STATE><FlashMod_PFLASH type="key"><Enabled type="flag">1</Enabled></FlashMod_PFLASH><FlashMod_DFLASH type="key"/><FlashMod_SHADOWFLASH type="key"/><Frontend type="key"><LastModule type="int">0</LastModule><VerifyProt type="flag">0</VerifyProt><VerifyProtFile type="string">verify.txt</VerifyProtFile><VerifyOnExit type="flag">0</VerifyOnExit><StoreLoadedSections type="flag">0</StoreLoadedSections><AutoStartProgAfterDownload type="flag">0</AutoStartProgAfterDownload><AutoCloseExecCmdDialog type="flag">0</AutoCloseExecCmdDialog><AllowOverwrite type="flag">0</AllowOverwrite></Frontend></UDEMemtool><ADD_ON_DEL_FLAG type="flag">0</ADD_ON_DEL_FLAG></STG_ADDON_PROF><CommQueueHndlStg type="key"><Beep type="flag">0</Beep><Retry type="flag">0</Retry><RetryPeriod type="int">0</RetryPeriod></CommQueueHndlStg><TargetStateHndlStg type="key"/></UDE.StdDbgSrv><MRUSourceFileList type="key"><NoOfMRUSrcFileEntries type="int">1</NoOfMRUSrcFileEntries><MRUSrcFile0 type="string">..\main.c</MRUSrcFile0></MRUSourceFileList></Core><TargetInfoFile type="string">stm_xpc560b64_minimodule_debug_jtag.cfg</TargetInfoFile><LastWriteDate type="string">27.02.2014 16:19:55:000</LastWriteDate></stg>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/UDE/stm_xpc560b64_minimodule_debug_jtag.cfg b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/UDE/stm_xpc560b64_minimodule_debug_jtag.cfg
new file mode 100644
index 0000000..09c2f8a
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/UDE/stm_xpc560b64_minimodule_debug_jtag.cfg
@@ -0,0 +1,156 @@
+[Main]
+Signature=UDE_TARGINFO_2.0
+Description=STM XPC560B64 Mini Module with SPC560B64 (Jtag)
+Description1=PLL set for 64MHz
+Description2=FLASH programming prepared but not enabled
+Description3=Write Filter for BAM Module
+MCUs=Controller0
+Architecture=PowerPC
+Vendor=STM
+Board=XPC560B Mini Module
+
+[Controller0]
+Family=PowerPC
+Type=SPC560B64
+Enabled=1
+IntClock=64000
+MemDevs=BAMWriteFilter
+ExtClock=8000
+
+[Controller0.Core]
+Protocol=PPCJTAG
+Enabled=1
+
+[Controller0.Core.LoadedAddOn]
+UDEMemtool=1
+
+[Controller0.Core.PpcJtagTargIntf]
+PortType=FTDI
+ResetWaitTime=50
+MaxJtagClk=2500
+DoSramInit=1
+UseNexus=1
+AdaptiveJtagPhaseShift=1
+ConnOption=Default
+ChangeJtagClk=25000
+HaltAfterReset=1
+SimioAddr=g_JtagSimioAccess
+FreezeTimers=1
+InvalidTlbOnReset=0
+InvalidateCache=0
+ForceCacheFlush=0
+IgnoreLockedLines=0
+ExecInitCmds=1
+JtagTapNumber=0
+JtagNumOfTaps=1
+JtagNumIrBefore=0
+JtagNumIrAfter=0
+
+SimioAddr=g_JtagSimioAccess
+
+FlushCache=0
+AllowMmuSetup=1
+UseExtReset=1
+HandleWdtBug=0
+ForceEndOfReset=0
+JtagViaPod=0
+AllowResetOnCheck=0
+ChangeMsr=0
+ChangeMsrValue=0x0
+ExecOnStartCmds=0
+ExecOnHaltCmds=0
+EnableProgramTimeMeasurement=0
+UseHwResetMode=0
+CommDevSel=PortType=USB,Type=FTDI
+TargetPort=Default
+HandleNexusAccessBug=0
+DoNotEnableTrapSwBrp=0
+BootPasswd0=0xFEEDFACE
+BootPasswd1=0xCAFEBEEF
+BootPasswd2=0xFFFFFFFF
+BootPasswd3=0xFFFFFFFF
+BootPasswd4=0xFFFFFFFF
+BootPasswd5=0xFFFFFFFF
+BootPasswd6=0xFFFFFFFF
+BootPasswd7=0xFFFFFFFF
+JtagIoType=Jtag
+ExecOnHaltCmdsWhileHalted=0
+TimerForPTM=Default
+AllowBreakOnUpdateBreakpoints=0
+ClearDebugStatusOnHalt=1
+HwResetMode=Simulate
+UseMasterNexusIfResetState=1
+UseLocalAddressTranslation=1
+Use64BitNexus=0
+InitSramOnlyWhenNotInitialized=0
+AllowHarrForUpdateDebugRegs=0
+DisableE2EECC=0
+UseCore0ForNexusMemoryAccessWhileRunning=0
+
+[Controller0.BAMWriteFilter]
+Description=BAM WriteAccess Filter
+Range0Start=0xFFFFC000
+Range0Size=0x4000
+Enabled=1
+Handler=AccessFilter
+Mode=ReadOnly
+
+[Controller0.PFLASH]
+Enabled=1
+EnableMemtoolByDefault=1
+
+[Controller0.Core.PpcJtagTargIntf.InitScript]
+// setup IVOPR
+// points to internal memory at 0x40000000
+SETSPR 0x3F 0x40000000 0xFFFFFFFF
+
+// disable watchdog
+SET SWT_SR 0xC520
+SET SWT_SR 0xD928
+SET SWT_CR 0xFF00000A
+
+// Oscillator select
+SET CGM_OCDS_SC 0x1000000
+SET CGM_OC_EN 0x1
+
+// enable all modes
+SET ME_MER 0x5FF
+
+// run mode
+SET ME_DRUN_MC 0x1F0032
+SET ME_RUN_PC0 0xFE
+
+// enable peripherals in run and low power modes
+SET ME_LP_PC0 0x500
+
+// enable clocks
+SET8 CGM_SC_DC0 0x80
+SET8 CGM_SC_DC1 0x80
+SET8 CGM_SC_DC2 0x80
+
+// setup clock monitor
+SET CMU_CSR 0x6
+SET CMU_LFREFR 0x1
+SET CMU_HFREFR 0xFFE
+
+// Make DRUN configuration active
+SET ME_MCTL 0x30005AF0
+SET ME_MCTL 0x3000A50F
+WAIT 0x5
+
+// setup pll to 64MHz
+SET FMPLL_CR 0x5400041 0xFFFFFFFF
+// run mode
+SET ME_DRUN_MC 0x1F00F4
+
+// Make DRUN configuration active
+SET ME_MCTL 0x30005AF0
+SET ME_MCTL 0x3000A50F
+WAIT 0x5
+
+// setup SSCM erro cfg for debug
+SET16 SSCM_ERROR 0x3 0x3
+
+[Controller0.Core.PpcJtagTargIntf.OnStartScript]
+
+[Controller0.Core.PpcJtagTargIntf.OnHaltScript]
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/chconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/chconf.h
new file mode 100644
index 0000000..f6244ad
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/halconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/halconf.h
new file mode 100644
index 0000000..6827953
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/halconf.h
@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM                  FALSE
+#endif
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/main.c b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/main.c
new file mode 100644
index 0000000..957f0e8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/main.c
@@ -0,0 +1,202 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+#include "shell.h"
+#include "chprintf.h"
+
+#define SHELL_WA_SIZE   THD_WORKING_AREA_SIZE(1024)
+#define TEST_WA_SIZE    THD_WORKING_AREA_SIZE(256)
+
+static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
+  size_t n, size;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: mem\r\n");
+    return;
+  }
+  n = chHeapStatus(NULL, &size);
+  chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX());
+  chprintf(chp, "heap fragments   : %u\r\n", n);
+  chprintf(chp, "heap free total  : %u bytes\r\n", size);
+}
+
+static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
+  static const char *states[] = {CH_STATE_NAMES};
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: threads\r\n");
+    return;
+  }
+  chprintf(chp, "    addr    stack prio refs     state time\r\n");
+  tp = chRegFirstThread();
+  do {
+    chprintf(chp, "%08lx %08lx %4lu %4lu %9s\r\n",
+            (uint32_t)tp, (uint32_t)tp->p_ctx.sp,
+            (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
+            states[tp->p_state]);
+    tp = chRegNextThread(tp);
+  } while (tp != NULL);
+}
+
+static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: test\r\n");
+    return;
+  }
+  tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(),
+                           TestThread, chp);
+  if (tp == NULL) {
+    chprintf(chp, "out of memory\r\n");
+    return;
+  }
+  chThdWait(tp);
+}
+
+static const ShellCommand commands[] = {
+  {"mem", cmd_mem},
+  {"threads", cmd_threads},
+  {"test", cmd_test},
+  {NULL, NULL}
+};
+
+static const ShellConfig shell_cfg1 = {
+  (BaseSequentialStream *)&SD1,
+  commands
+};
+
+/*
+ * LEDs blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+
+  while (true) {
+    unsigned i;
+
+    for (i = 0; i < 4; i++) {
+      palClearPad(PORT_E, PE_LED1);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT_E, PE_LED2);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT_E, PE_LED3);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT_E, PE_LED4);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_E, PE_LED1);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_E, PE_LED2);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_E, PE_LED3);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_E, PE_LED4);
+      chThdSleepMilliseconds(300);
+    }
+
+    for (i = 0; i < 4; i++) {
+      palTogglePort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) |
+                            PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4));
+      chThdSleepMilliseconds(500);
+      palTogglePort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) |
+                            PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4));
+      chThdSleepMilliseconds(500);
+    }
+
+    for (i = 0; i < 4; i++) {
+      palTogglePad(PORT_E, PE_LED1);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_E, PE_LED1);
+      palTogglePad(PORT_E, PE_LED2);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_E, PE_LED2);
+      palTogglePad(PORT_E, PE_LED3);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_E, PE_LED3);
+      palTogglePad(PORT_E, PE_LED4);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_E, PE_LED4);
+    }
+
+    for (i = 0; i < 4; i++) {
+      palClearPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED3));
+      palSetPort(PORT_E, PAL_PORT_BIT(PE_LED2) | PAL_PORT_BIT(PE_LED4));
+      chThdSleepMilliseconds(500);
+      palClearPort(PORT_E, PAL_PORT_BIT(PE_LED2) | PAL_PORT_BIT(PE_LED4));
+      palSetPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED3));
+      chThdSleepMilliseconds(500);
+    }
+
+    palSetPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) |
+                       PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4));
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+  thread_t *shelltp = NULL;
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Shell manager initialization.
+   */
+  shellInit();
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   */
+  sdStart(&SD1, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity.
+   */
+  while (true) {
+    if (!shelltp)
+      shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
+    else if (chThdTerminatedX(shelltp)) {
+      chThdRelease(shelltp);    /* Recovers memory of the previous shell.   */
+      shelltp = NULL;           /* Triggers spawning of a new shell.        */
+    }
+    chThdSleepMilliseconds(1000);
+  }
+  return 0;
+}
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/mcuconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/mcuconf.h
new file mode 100644
index 0000000..b510c5b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560B-EVB/mcuconf.h
@@ -0,0 +1,273 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * SPC560Bxx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 1...15       Lowest...Highest.
+ * DMA priorities:
+ * 0...15       Highest...Lowest.
+ */
+
+#define SPC560Bxx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define SPC5_NO_INIT                        FALSE
+#define SPC5_ALLOW_OVERCLOCK                FALSE
+#define SPC5_DISABLE_WATCHDOG               TRUE
+#define SPC5_FMPLL0_IDF_VALUE               1
+#define SPC5_FMPLL0_NDIV_VALUE              32
+#define SPC5_FMPLL0_ODF                     SPC5_FMPLL_ODF_DIV4
+#define SPC5_XOSCDIV_VALUE                  1
+#define SPC5_IRCDIV_VALUE                   1
+#define SPC5_PERIPHERAL1_CLK_DIV_VALUE      2
+#define SPC5_PERIPHERAL2_CLK_DIV_VALUE      2
+#define SPC5_PERIPHERAL3_CLK_DIV_VALUE      2
+#define SPC5_CLOCK_FAILURE_HOOK()           osalSysHalt("clock failure")
+
+#define SPC5_EMIOS0_GPRE_VALUE              20
+#define SPC5_EMIOS1_GPRE_VALUE              20
+
+/*
+ * EDMA driver settings.
+ */
+#define SPC5_EDMA_CR_SETTING                (EDMA_CR_GRP1PRI(1) |           \
+                                             EDMA_CR_GRP0PRI(0) |           \
+                                             EDMA_CR_EMLM       |           \
+                                             EDMA_CR_ERGA)
+#define SPC5_EDMA_GROUP0_PRIORITIES         0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+#define SPC5_EDMA_ERROR_IRQ_PRIO            12
+#define SPC5_EDMA_ERROR_HANDLER()           osalSysHalt("DMA failure")
+
+/*
+ * SERIAL driver system settings.
+ */
+#define SPC5_SERIAL_USE_LINFLEX0            TRUE
+#define SPC5_SERIAL_USE_LINFLEX1            FALSE
+#define SPC5_SERIAL_USE_LINFLEX2            FALSE
+#define SPC5_SERIAL_USE_LINFLEX3            FALSE
+#define SPC5_SERIAL_USE_LINFLEX4            FALSE
+#define SPC5_SERIAL_USE_LINFLEX5            FALSE
+#define SPC5_SERIAL_USE_LINFLEX6            FALSE
+#define SPC5_SERIAL_USE_LINFLEX7            FALSE
+#define SPC5_SERIAL_USE_LINFLEX8            FALSE
+#define SPC5_SERIAL_USE_LINFLEX9            FALSE
+#define SPC5_SERIAL_LINFLEX0_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX1_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX2_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX3_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX4_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX5_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX6_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX7_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX8_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX9_PRIORITY       8
+
+/*
+ * SPI driver system settings.
+ */
+#define SPC5_SPI_USE_DSPI0                  FALSE
+#define SPC5_SPI_USE_DSPI1                  FALSE
+#define SPC5_SPI_USE_DSPI2                  FALSE
+#define SPC5_SPI_USE_DSPI3                  FALSE
+#define SPC5_SPI_USE_DSPI4                  FALSE
+#define SPC5_SPI_USE_DSPI5                  FALSE
+#define SPC5_SPI_DMA_MODE                   SPC5_SPI_DMA_RX_ONLY
+#define SPC5_SPI_DSPI0_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3 | SPC5_MCR_PCSIS4 | SPC5_MCR_PCSIS5)
+#define SPC5_SPI_DSPI1_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3 | SPC5_MCR_PCSIS4)
+#define SPC5_SPI_DSPI2_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3)
+#define SPC5_SPI_DSPI3_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1)
+#define SPC5_SPI_DSPI4_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1)
+#define SPC5_SPI_DSPI5_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1)
+#define SPC5_SPI_DSPI0_TX1_DMA_CH_ID        4
+#define SPC5_SPI_DSPI0_TX2_DMA_CH_ID        5
+#define SPC5_SPI_DSPI0_RX_DMA_CH_ID         6
+#define SPC5_SPI_DSPI1_TX1_DMA_CH_ID        7
+#define SPC5_SPI_DSPI1_TX2_DMA_CH_ID        8
+#define SPC5_SPI_DSPI1_RX_DMA_CH_ID         9
+#define SPC5_SPI_DSPI2_TX1_DMA_CH_ID        10
+#define SPC5_SPI_DSPI2_TX2_DMA_CH_ID        11
+#define SPC5_SPI_DSPI2_RX_DMA_CH_ID         12
+#define SPC5_SPI_DSPI3_TX1_DMA_CH_ID        13
+#define SPC5_SPI_DSPI3_TX2_DMA_CH_ID        14
+#define SPC5_SPI_DSPI3_RX_DMA_CH_ID         15
+#define SPC5_SPI_DSPI4_TX1_DMA_CH_ID        1
+#define SPC5_SPI_DSPI4_TX2_DMA_CH_ID        2
+#define SPC5_SPI_DSPI4_RX_DMA_CH_ID         3
+#define SPC5_SPI_DSPI5_TX1_DMA_CH_ID        4
+#define SPC5_SPI_DSPI5_TX2_DMA_CH_ID        5
+#define SPC5_SPI_DSPI5_RX_DMA_CH_ID         6
+#define SPC5_SPI_DSPI0_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI1_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI2_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI3_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI4_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI5_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI0_IRQ_PRIO             10
+#define SPC5_SPI_DSPI1_IRQ_PRIO             10
+#define SPC5_SPI_DSPI2_IRQ_PRIO             10
+#define SPC5_SPI_DSPI3_IRQ_PRIO             10
+#define SPC5_SPI_DSPI4_IRQ_PRIO             10
+#define SPC5_SPI_DSPI5_IRQ_PRIO             10
+#define SPC5_SPI_DMA_ERROR_HOOK(spip)       osalSysHalt("DSPI DMA failure")
+
+/*
+ * ICU-PWM driver system settings.
+ */
+#define SPC5_ICU_USE_EMIOS0_CH0             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH1             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH2             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH3             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH4             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH5             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH6             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH7             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH24            FALSE
+
+#define SPC5_PWM_USE_EMIOS0_GROUP0          FALSE
+#define SPC5_PWM_USE_EMIOS0_GROUP1          FALSE
+
+#define SPC5_EMIOS0_GFR_F0F1_PRIORITY       8
+#define SPC5_EMIOS0_GFR_F2F3_PRIORITY       8
+#define SPC5_EMIOS0_GFR_F4F5_PRIORITY       8
+#define SPC5_EMIOS0_GFR_F6F7_PRIORITY       8
+#define SPC5_EMIOS0_GFR_F8F9_PRIORITY       8
+#define SPC5_EMIOS0_GFR_F10F11_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F12F13_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F14F15_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F16F17_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F18F19_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F20F21_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F22F23_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F24F25_PRIORITY     8
+
+#define SPC5_EMIOS0_START_PCTL              (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_EMIOS0_STOP_PCTL               (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#define SPC5_ICU_USE_EMIOS1_CH24            FALSE
+
+#define SPC5_PWM_USE_EMIOS1_GROUP0          FALSE
+#define SPC5_PWM_USE_EMIOS1_GROUP1          FALSE
+#define SPC5_PWM_USE_EMIOS1_GROUP2          FALSE
+
+#define SPC5_EMIOS1_GFR_F0F1_PRIORITY       8
+#define SPC5_EMIOS1_GFR_F2F3_PRIORITY       8
+#define SPC5_EMIOS1_GFR_F4F5_PRIORITY       8
+#define SPC5_EMIOS1_GFR_F6F7_PRIORITY       8
+#define SPC5_EMIOS1_GFR_F8F9_PRIORITY       8
+#define SPC5_EMIOS1_GFR_F10F11_PRIORITY     8
+#define SPC5_EMIOS1_GFR_F12F13_PRIORITY     8
+#define SPC5_EMIOS1_GFR_F14F15_PRIORITY     8
+#define SPC5_EMIOS1_GFR_F16F17_PRIORITY     8
+#define SPC5_EMIOS1_GFR_F18F19_PRIORITY     8
+#define SPC5_EMIOS1_GFR_F20F21_PRIORITY     8
+#define SPC5_EMIOS1_GFR_F22F23_PRIORITY     8
+#define SPC5_EMIOS1_GFR_F24F25_PRIORITY     8
+
+#define SPC5_EMIOS1_START_PCTL              (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_EMIOS1_STOP_PCTL               (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+/*
+ * CAN driver system settings.
+ */
+#define SPC5_CAN_USE_FILTERS                FALSE
+
+#define SPC5_CAN_USE_FLEXCAN0               FALSE
+#define SPC5_CAN_FLEXCAN0_USE_EXT_CLK       FALSE
+#define SPC5_CAN_FLEXCAN0_PRIORITY          11
+#define SPC5_CAN_FLEXCAN0_START_PCTL        (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_CAN_FLEXCAN0_STOP_PCTL         (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#define SPC5_CAN_USE_FLEXCAN1               FALSE
+#define SPC5_CAN_FLEXCAN1_USE_EXT_CLK       FALSE
+#define SPC5_CAN_FLEXCAN1_PRIORITY          11
+#define SPC5_CAN_FLEXCAN1_START_PCTL        (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_CAN_FLEXCAN1_STOP_PCTL         (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#define SPC5_CAN_USE_FLEXCAN2               FALSE
+#define SPC5_CAN_FLEXCAN2_USE_EXT_CLK       FALSE
+#define SPC5_CAN_FLEXCAN2_PRIORITY          11
+#define SPC5_CAN_FLEXCAN2_START_PCTL        (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_CAN_FLEXCAN2_STOP_PCTL         (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#define SPC5_CAN_USE_FLEXCAN3               FALSE
+#define SPC5_CAN_FLEXCAN3_USE_EXT_CLK       FALSE
+#define SPC5_CAN_FLEXCAN3_PRIORITY          11
+#define SPC5_CAN_FLEXCAN3_START_PCTL        (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_CAN_FLEXCAN3_STOP_PCTL         (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#define SPC5_CAN_USE_FLEXCAN4               FALSE
+#define SPC5_CAN_FLEXCAN4_USE_EXT_CLK       FALSE
+#define SPC5_CAN_FLEXCAN4_PRIORITY          11
+#define SPC5_CAN_FLEXCAN4_START_PCTL        (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_CAN_FLEXCAN4_STOP_PCTL         (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#define SPC5_CAN_USE_FLEXCAN5               FALSE
+#define SPC5_CAN_FLEXCAN5_PRIORITY          11
+#define SPC5_CAN_FLEXCAN5_START_PCTL        (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_CAN_FLEXCAN5_STOP_PCTL         (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+/*
+* ADC driver system settings.
+*/
+#define SPC5_ADC_USE_ADC0                   FALSE
+#define SPC5_ADC_ADC0_CLK_FREQUENCY         HALF_PERIPHERAL_SET_CLOCK_FREQUENCY
+#define SPC5_ADC_ADC0_AUTO_CLOCK_OFF        FALSE
+#define SPC5_ADC_ADC0_WD_PRIORITY           12
+#define SPC5_ADC_ADC0_DMA_CH_ID             1
+#define SPC5_ADC_ADC0_DMA_IRQ_PRIO          12
+#define SPC5_ADC_ADC0_START_PCTL            (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_ADC_ADC0_STOP_PCTL             (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#define SPC5_ADC_USE_ADC1                   FALSE
+#define SPC5_ADC_ADC1_CLK_FREQUENCY         HALF_PERIPHERAL_SET_CLOCK_FREQUENCY
+#define SPC5_ADC_ADC1_AUTO_CLOCK_OFF        FALSE
+#define SPC5_ADC_ADC1_WD_PRIORITY           12
+#define SPC5_ADC_ADC1_DMA_CH_ID             2
+#define SPC5_ADC_ADC1_DMA_IRQ_PRIO          12
+#define SPC5_ADC_ADC1_START_PCTL            (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_ADC_ADC1_STOP_PCTL             (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/.cproject b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/.cproject
new file mode 100644
index 0000000..03d4fd0
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/.cproject
@@ -0,0 +1,57 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.665946016">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.665946016" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.665946016" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.665946016." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1131493307" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1131493307.1844928918" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1106552272" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1064008669" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.2048166271" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1577341141" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.841305605" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.954135725" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.287919901" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1061591135" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-SPC560D-EVB.null.2129661677" name="RT-SPC560D-EVB"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.665946016">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-SPC560D-EVB"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/.project b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/.project
new file mode 100644
index 0000000..5a21d7f
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-SPC560D-EVB</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_EVB_SPC560D</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/Makefile b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/Makefile
new file mode 100644
index 0000000..36836cf
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/Makefile
@@ -0,0 +1,188 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -mno-spe -msoft-float
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data.
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT =
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = no
+endif
+
+# If enabled, this option allows to compile the application in VLE mode.
+ifeq ($(USE_VLE),)
+  USE_VLE = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the optional exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/e200/compilers/GCC/mk/startup_spc560dxx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/boards/ST_EVB_SPC560D/board.mk
+include $(CHIBIOS)/os/hal/ports/SPC5/SPC560Dxx/platform.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/e200/compilers/GCC/mk/port.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/SPC560D40.ld
+
+# C sources here.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       $(CHIBIOS)/os/hal/lib/streams/memstreams.c \
+       $(CHIBIOS)/os/hal/lib/streams/chprintf.c \
+       $(CHIBIOS)/os/various/shell.c \
+       main.c
+
+# C++ sources here.
+CPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+#MCU  = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames
+MCU  = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames
+
+#TRGT = powerpc-eabi-
+TRGT = ppc-vle-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+MOT  = $(CP) -O srec
+BIN  = $(CP) -O binary
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/e200/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/UDE/debug.wsx b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/UDE/debug.wsx
new file mode 100644
index 0000000..5ee1597
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/UDE/debug.wsx
@@ -0,0 +1,273 @@
+<?xml version="1.0" encoding="ISO-8859-1"?>
+<stg format="2.0">
+	<OriginalWsp type="string">debug.wsx</OriginalWsp><BackupWspFlag type="flag">0</BackupWspFlag><UseWspCnt type="int">0</UseWspCnt><WspCloseCnt type="int">0</WspCloseCnt><ProdInfo type="bin" size="52">vQTv/gAAAQAXAAIA8QkPAAAABAAAAAAAPwAAAAAAAAAEAAAAAgAAAAAAAAAAAAAAAAAAAA==</ProdInfo><ProdInfoString type="string">4.0</ProdInfoString><CreationDate type="string">19.11.2012 16:18:08:999</CreationDate><MainFrame type="key"><PersistTreeRoot type="key"><DesktopState type="key"><Placement type="key"><MainFrame type="string">MCAAAAAAAAAAAAAABAAAAAAAPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPHHAAAAAAPBAAAAAADGFAAAAABCDAAAAA</MainFrame><WorkbookMode type="string">False</WorkbookMode><DockStateSaved type="string">True</DockStateSaved></Placement><DockState type="key"><Bars type="string">14</Bars><ScreenCX type="string">1680</ScreenCX><ScreenCY type="string">1050</ScreenCY><Bar-0 type="key"><BarID type="string">59393</BarID><Style type="string">32768</Style><ExStyle type="string">0</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">1000000</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">0</MRUHorzDockCX><MRUHorzDockCY type="string">0</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">0</DockingStyle><TypeID type="string">0</TypeID><ClassName type="string">UDEStatusBar</ClassName><WindowName type="string">For Help, press F1</WindowName><ResourceID type="string">0</ResourceID></Bar-0><Bar-1 type="key"><BarID type="string">59419</BarID><Bars type="string">11</Bars><Bar_0 type="string" name="Bar#0">0</Bar_0><Bar_1 type="string" name="Bar#1">59647</Bar_1><Bar_2 type="string" name="Bar#2">0</Bar_2><Bar_3 type="string" name="Bar#3">59399</Bar_3><Bar_4 type="string" name="Bar#4">59398</Bar_4><Bar_5 type="string" name="Bar#5">59397</Bar_5><Bar_6 type="string" name="Bar#6">59403</Bar_6><Bar_7 type="string" name="Bar#7">59401</Bar_7><Bar_8 type="string" name="Bar#8">59406</Bar_8><Bar_9 type="string" name="Bar#9">59402</Bar_9><Bar_10 type="string" name="Bar#10">0</Bar_10><Style type="string">0</Style><ExStyle type="string">0</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">0</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">0</MRUHorzDockCX><MRUHorzDockCY type="string">0</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">0</DockingStyle><TypeID type="string">0</TypeID><ClassName type="string">CUDEDockBar</ClassName><WindowName type="string"></WindowName><ResourceID type="string">0</ResourceID></Bar-1><Bar-2 type="key"><BarID type="string">59422</BarID><Bars type="string">3</Bars><Bar_0 type="string" name="Bar#0">0</Bar_0><Bar_1 type="string" name="Bar#1">9110</Bar_1><Bar_2 type="string" name="Bar#2">0</Bar_2><Style type="string">0</Style><ExStyle type="string">0</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">0</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">0</MRUHorzDockCX><MRUHorzDockCY type="string">0</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">0</DockingStyle><TypeID type="string">0</TypeID><ClassName type="string">CUDEDockBar</ClassName><WindowName type="string"></WindowName><ResourceID type="string">0</ResourceID></Bar-2><Bar-3 type="key"><BarID type="string">59420</BarID><Bars type="string">3</Bars><Bar_0 type="string" name="Bar#0">0</Bar_0><Bar_1 type="string" name="Bar#1">9100</Bar_1><Bar_2 type="string" name="Bar#2">0</Bar_2><Style type="string">0</Style><ExStyle type="string">0</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">0</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">0</MRUHorzDockCX><MRUHorzDockCY type="string">0</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">0</DockingStyle><TypeID type="string">0</TypeID><ClassName type="string">CUDEDockBar</ClassName><WindowName type="string"></WindowName><ResourceID type="string">0</ResourceID></Bar-3><Bar-4 type="key"><BarID type="string">59647</BarID><MRUWidth type="string">381</MRUWidth><Docking type="string">True</Docking><MRUDockID type="string">59419</MRUDockID><MRUDockLeftPos type="string">-1</MRUDockLeftPos><MRUDockTopPos type="string">-1</MRUDockTopPos><MRUDockRightPos type="string">1251</MRUDockRightPos><MRUDockBottomPos type="string">26</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12220</Style><ExStyle type="string">908</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">1000000</PctWidth><MRUFloatCX type="string">381</MRUFloatCX><MRUFloatCY type="string">27</MRUFloatCY><MRUHorzDockCX type="string">1252</MRUHorzDockCX><MRUHorzDockCY type="string">27</MRUHorzDockCY><MRUVertDockCX type="string">76</MRUVertDockCX><MRUVertDockCY type="string">511</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14947</TypeID><ClassName type="string">UDEMDIMenuBar</ClassName><WindowName type="string">Menu bar</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Menu bar</Title><Buttons type="string">BAAAAAAIAACAAAAAAIAADAAAAAAIAAEAAAAAAIAAFAAAAAAIAAGAAAAAAIAAHAAAAAAIAAIAAAAAAIAAJAAAAAAIAAKAAAAAAIAA</Buttons></ToolBarInfoEx></Bar-4><Bar-5 type="key"><BarID type="string">59398</BarID><XPos type="string">503</XPos><YPos type="string">26</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">503</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">614</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">15625</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">111</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Edit</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Edit</Title><NewButtons_BinCount type="string">2</NewButtons_BinCount><NewButtons_BinVal0 type="string">DCBOAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAACCBOAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAFCBOAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAIABOAAAAAAPPPPPPPPAAAAAAAAAA</NewButtons_BinVal0><NewButtons_BinVal1 type="string">AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAA</NewButtons_BinVal1></ToolBarInfoEx></Bar-5><Bar-6 type="key"><BarID type="string">59397</BarID><XPos type="string">614</XPos><YPos type="string">26</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">614</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">794</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">15625</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">180</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">File</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">File</Title><NewButtons_BinCount type="string">3</NewButtons_BinCount><NewButtons_BinVal0 type="string">AHHBAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAABHHBAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAACHHBAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAADHHBAAAAAAPPPPPPPPAAAAAAAAAA</NewButtons_BinVal0><NewButtons_BinVal1 type="string">AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAEHHBAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAFHHBAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAOKHBAAAAAABAAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAA</NewButtons_BinVal1><NewButtons_BinVal2 type="string">AAPPPPPPPPAAAAAAAA</NewButtons_BinVal2></ToolBarInfoEx></Bar-6><Bar-7 type="key"><BarID type="string">59403</BarID><XPos type="string">794</XPos><YPos type="string">26</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">794</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">928</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">1181049967</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">31250</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">134</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Config</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Config</Title><NewButtons_BinCount type="string">2</NewButtons_BinCount><NewButtons_BinVal0 type="string">GJHBAAAAAADAAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAAMMHBAAAAAAOPAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAANMHBAAAAAAAABAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAAFNHBAAAAAAGAAAAAAAKBDLFIMBFC</NewButtons_BinVal0><NewButtons_BinVal1 type="string">NFHJBEGJFDMJNFCMOIPKHNAAAAAAAAPPPPPPPPAAAAAAAAINHBAAAAAACBAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAA</NewButtons_BinVal1></ToolBarInfoEx></Bar-7><Bar-8 type="key"><BarID type="string">59401</BarID><XPos type="string">928</XPos><YPos type="string">26</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">928</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">1407</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">151587341</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">62500</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">479</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Views</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Views</Title><NewButtons_BinCount type="string">6</NewButtons_BinCount><NewButtons_BinVal0 type="string">JJHBAAAAAAFBAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAAKJHBAAAAAAPAAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAAMJHBAAAAAAGBAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAANKHBAAAAAAAAAAAAAAAGKBFNONHL</NewButtons_BinVal0><NewButtons_BinVal1 type="string">AOENBBBJCBAABADAJECGGLAAAAAAAAPPPPPPPPAAAAAAAAALHBAAAAAAKAAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAACLHBAAAAAAMFAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAADLHBAAAAAAKFAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAA</NewButtons_BinVal1><NewButtons_BinVal2 type="string">AAPPPPPPPPAAAAAAAAFLHBAAAAAANCAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAAGLHBAAAAAAMDAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAAHLHBAAAAAAGEAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAAAMHBAAAAAA</NewButtons_BinVal2><NewButtons_BinVal3 type="string">KAAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAABMHBAAAAAAEBAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAACMHBAAAAAAJBAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAADMHBAAAAAALBAAAAAAKEMNADOLNFNPBMHEJJNE</NewButtons_BinVal3><NewButtons_BinVal4 type="string">MIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAAEMHBAAAAAAAFAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAAFMHBAAAAAAICAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAAHMHBAAAAAANEEAAAAAJEOEILFFBLMIPBEEPLLMEDEOPKHPBGJHAAAAAAAAPPPPPPPP</NewButtons_BinVal4><NewButtons_BinVal5 type="string">AAAAAAAAIMHBAAAAAAGFEAAAAAJEOEILFFBLMIPBEEPLLMEDEOPKHPBGJHAAAAAAAAPPPPPPPPAAAAAAAAJMHBAAAAAAAGEAAAAAJEOEILFFBLMIPBEEPLLMEDEOPKHPBGJHAAAAAAAAPPPPPPPPAAAAAAAALMHBAAAAAAGEAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAA</NewButtons_BinVal5></ToolBarInfoEx></Bar-8><Bar-9 type="key"><BarID type="string">59406</BarID><XPos type="string">1407</XPos><YPos type="string">26</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">1407</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">1653</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">125000</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">246</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Macro</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Macro</Title><NewButtons_BinCount type="string">2</NewButtons_BinCount><NewButtons_BinVal0 type="string">DKHBAAAAAALDAAAAAAGDHJMPFPDOOJLAGELLAIHGBMMEFJBIPLAAAAAAAAPPPPPPPPAAAAAAAAEKHBAAAAAAAEAAAAAAGDHJMPFPDOOJLAGELLAIHGBMMEFJBIPLAAAAAAAAPPPPPPPPAAAAAAAAGKHBAAAAAAMDAAAAAAGDHJMPFPDOOJLAGELLAIHGBMMEFJBIPLAAAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAAA</NewButtons_BinVal0><NewButtons_BinVal1 type="string">AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAMKHBAAAACAGJAAAAAAAAAANMAJBFNENHHACJPEILAJFEFEECLCDPKCBAAAAAAAKAAAAAAANAAAAAAAFFEEFEHFPGCHLGDHAHBGDGFGAA</NewButtons_BinVal1></ToolBarInfoEx></Bar-9><Bar-10 type="key"><BarID type="string">59399</BarID><YPos type="string">26</YPos><MRUWidth type="string">504</MRUWidth><Docking type="string">True</Docking><MRUDockID type="string">59419</MRUDockID><MRUDockLeftPos type="string">-1</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">503</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">250000</PctWidth><MRUFloatCX type="string">504</MRUFloatCX><MRUFloatCY type="string">30</MRUFloatCY><MRUHorzDockCX type="string">504</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">123</MRUVertDockCX><MRUVertDockCY type="string">90</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Debug</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Debug</Title><NewButtons_BinCount type="string">5</NewButtons_BinCount><NewButtons_BinVal0 type="string">BLHBAAAAAAIBAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAAELHBAAAAAAOFAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAAILHBAAAAAAHAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAJLHBAAAAAAJAAAAAAABINLNCJGPD</NewButtons_BinVal0><NewButtons_BinVal1 type="string">KECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAKLHBAAAAAAKAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAALLHBAAAAAALAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAMLHBAAAAAAIAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAA</NewButtons_BinVal1><NewButtons_BinVal2 type="string">AAPPPPPPPPAAAAAAAANLHBAAAAAABCDAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAOLHBAAAAAANAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAPLHBAAAAAAMAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAA</NewButtons_BinVal2><NewButtons_BinVal3 type="string">PPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAANHBAAAAAADAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAABNHBAAAAAAGAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAA</NewButtons_BinVal3><NewButtons_BinVal4 type="string">AAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAACNHBAAAACAKKAAAAAAAAAADHHMLHLPEKIIOMOEJLGLBHJIBGLAHAFDBAAAAAAADAAAAAAAFAAAAAAADEPGCHFGAAENHBAAAAAADAAAAAAAKBDLFIMBFCNFHJBEGJFDMJNFCMOIPKHNAAAAAAAAPPPPPPPPAAAAAAAA</NewButtons_BinVal4></ToolBarInfoEx></Bar-10><Bar-11 type="key"><BarID type="string">59402</BarID><XPos type="string">1653</XPos><YPos type="string">26</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">1653</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">1795</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">500000</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">142</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Tools</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Tools</Title><NewButtons type="string">DNHBAAAACAEGAAAAAAAAAAGEAOMHHDMDCIFAKEIIICDBCMNFEDNFHHBAAAAAAAGAAAAAAAFAAAAAAADEPGCHFGAAHNHBAAAAAABOAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAA</NewButtons></ToolBarInfoEx></Bar-11><Bar-12 type="key"><BarID type="string">9110</BarID><XPos type="string">1</XPos><YPos type="string">5</YPos><Docking type="string">True</Docking><MRUDockID type="string">59422</MRUDockID><MRUDockLeftPos type="string">1</MRUDockLeftPos><MRUDockTopPos type="string">5</MRUDockTopPos><MRUDockRightPos type="string">1252</MRUDockRightPos><MRUDockBottomPos type="string">155</MRUDockBottomPos><MRUFloatStyle type="string">4</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">36756</Style><ExStyle type="string">3889</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">1000000</PctWidth><MRUFloatCX type="string">300</MRUFloatCX><MRUFloatCY type="string">180</MRUFloatCY><MRUHorzDockCX type="string">1251</MRUHorzDockCX><MRUHorzDockCY type="string">150</MRUHorzDockCY><MRUVertDockCX type="string">300</MRUVertDockCX><MRUVertDockCY type="string">180</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14948</TypeID><ClassName type="string">CTabWndControlBar</ClassName><WindowName type="string">Tab Window Bar 0</WindowName><ResourceID type="string">0</ResourceID><ViewServerInstCnt type="string">-1</ViewServerInstCnt><ViewServerMultiInst type="string">False</ViewServerMultiInst><ViewServerType type="string">UDEDesktop Standard Bars</ViewServerType><ViewServerInstName type="string">Tab Window Bar 0</ViewServerInstName><ViewServerDbgSrvCfg type="string">UDEDesktop</ViewServerDbgSrvCfg><ExDockRow type="string">0</ExDockRow><ExDockCol type="string">0</ExDockCol><ExDockHeight type="string">150</ExDockHeight><NoOfDockBars type="string">1</NoOfDockBars></Bar-12><Bar-13 type="key"><BarID type="string">9100</BarID><Visible type="string">False</Visible><XPos type="string">0</XPos><YPos type="string">0</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">0</MRUDockLeftPos><MRUDockTopPos type="string">0</MRUDockTopPos><MRUDockRightPos type="string">0</MRUDockRightPos><MRUDockBottomPos type="string">0</MRUDockBottomPos><MRUFloatStyle type="string">4</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">8084</Style><ExStyle type="string">3889</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">1000000</PctWidth><MRUFloatCX type="string">300</MRUFloatCX><MRUFloatCY type="string">180</MRUFloatCY><MRUHorzDockCX type="string">300</MRUHorzDockCX><MRUHorzDockCY type="string">180</MRUHorzDockCY><MRUVertDockCX type="string">150</MRUVertDockCX><MRUVertDockCY type="string">180</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14948</TypeID><ClassName type="string">CUdeProjectWspBar</ClassName><WindowName type="string">Project Workspace Bar</WindowName><ResourceID type="string">0</ResourceID><ViewServerInstCnt type="string">-1</ViewServerInstCnt><ViewServerMultiInst type="string">False</ViewServerMultiInst><ViewServerType type="string">UDEDesktop Standard Bars</ViewServerType><ViewServerInstName type="string">Project Workspace Bar</ViewServerInstName><ViewServerDbgSrvCfg type="string">UDEDesktop</ViewServerDbgSrvCfg><ExDockRow type="string">0</ExDockRow><ExDockCol type="string">0</ExDockCol><ExDockHeight type="string">0</ExDockHeight><NoOfDockBars type="string">1</NoOfDockBars></Bar-13></DockState><ToolBarMgr type="key"><ToolTips type="string">True</ToolTips><CoolLook type="string">True</CoolLook><LargeButtons type="string">False</LargeButtons></ToolBarMgr></DesktopState></PersistTreeRoot><StdTargetManagerWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">21.11.2012 14:43:52:278</FrameCreated><ViewSrv type="key"><TargetBrowserView type="key"><SplitterRatio type="int">48</SplitterRatio></TargetBrowserView></ViewSrv><NETFrameMode type="int">77824</NETFrameMode><NETFrameSaveIndex type="int">1</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">1</CommonVisibilityGroup><VisibilityGroup_1 type="string">WorkspaceManager</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdTargetManagerWin><StdUDEMessageWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">19.11.2012 16:28:52:057</FrameCreated><ViewSrv type="key"><LogWin type="key"><Index type="key"><Width type="bin" size="8">MgAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Index><Type type="key"><Width type="bin" size="8">ZAAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Type><Time type="key"><Width type="bin" size="8">ZAAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Time><Src type="key"><Width type="bin" size="8">lgAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Src><Msg type="key"><Width type="bin" size="8">6AMAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Msg></LogWin><CmdWin type="key"><History type="key"/></CmdWin></ViewSrv><FrameDockState type="flag">1</FrameDockState><FrameMode type="int">3</FrameMode><NETFrameMode type="int">90112</NETFrameMode><NETFrameSaveIndex type="int">0</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">1</CommonVisibilityGroup><VisibilityGroup_1 type="string">WorkspaceManager</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdUDEMessageWin><StdUDECmdWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDECmdWin><UDETraceWin2 type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDETraceWin2><StdUDEWspHTMLView type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEWspHTMLView><Tab_Window_Bar_0 type="key" name="Tab Window Bar 0"><ProjectOpenFlag type="flag">1</ProjectOpenFlag><FrameDockState type="flag">1</FrameDockState><ProjectLastActivePage type="int">0</ProjectLastActivePage></Tab_Window_Bar_0><Project_Workspace_Bar type="key" name="Project Workspace Bar"><ProjectOpenFlag type="flag">0</ProjectOpenFlag><FrameDockState type="flag">1</FrameDockState><ProjectLastActivePage type="int">0</ProjectLastActivePage></Project_Workspace_Bar><TraceFramework type="key"/><SelectedPrinter type="string">\\napnt002.nap.st.com\NAPPRT0001</SelectedPrinter><VisibilityGroupsMgr type="key"><Core type="key"><UsePrimaryGroup type="flag">0</UsePrimaryGroup><UseLastUsedGroup type="flag">0</UseLastUsedGroup></Core><VisibilityGroup_1 type="key"><NoOfDebugger type="int">0</NoOfDebugger><DefaultGroupName type="string">WorkspaceManager</DefaultGroupName><GroupName type="string">WorkspaceManager</GroupName><PrimaryGroup type="flag">0</PrimaryGroup><CommonGroup type="flag">1</CommonGroup></VisibilityGroup_1><VisibilityGroup_2 type="key"><Debugger_1 type="string">Core</Debugger_1><NoOfDebugger type="int">1</NoOfDebugger><DefaultGroupName type="string">Target0.Controller0.Core</DefaultGroupName><GroupName type="string">Target0.Controller0.Core</GroupName><PrimaryGroup type="flag">1</PrimaryGroup><CommonGroup type="flag">0</CommonGroup></VisibilityGroup_2><NoOfDefaultVisibilityGroups type="int">2</NoOfDefaultVisibilityGroups><NoOfVisibilityGroups type="int">2</NoOfVisibilityGroups><EnableUserSwitchOfVisibilityGroups type="flag">0</EnableUserSwitchOfVisibilityGroups><EnableDebuggerSwitchOfVisibilityGroups type="flag">0</EnableDebuggerSwitchOfVisibilityGroups><VisibilityGroupsCtrlTBCat type="int">7</VisibilityGroupsCtrlTBCat><EnableVisibilityGroups type="flag">0</EnableVisibilityGroups></VisibilityGroupsMgr><NETPlacementRoot type="key"><FormsData type="innerxml"><FormsData><Bounds><X>143</X><Y>83</Y><Width>1295</Width><Height>778</Height></Bounds><ClientSize><Width>1279</Width><Height>740</Height></ClientSize><State>Normal</State></FormsData></FormsData><DockingManagerControlData type="innerxml"><DockingManagerControlData><MDIActive>false</MDIActive><DocumentDockStyle>Top</DocumentDockStyle><DockingControls><DockingControlData><DockedDimension>1271</DockedDimension><Cancelled>false</Cancelled><DockingType>Bottom</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>true</Selected></DockingControlData><DockingControlData><DockedDimension>417</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>true</Selected></DockingControlData><DockingControlData><DockedDimension>417</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>1</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>0</DockedDimension><Cancelled>false</Cancelled><DockingType>Top</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>-1</PanelIndex><ContainerType>TabbedDocument</ContainerType><Selected>true</Selected></DockingControlData><DockingControlData><DockedDimension>417</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>2</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>417</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>3</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData></DockingControls><LeftDockingContainerControlData><DockingContainerControlData><Tabbed>true</Tabbed><Dimension>556</Dimension></DockingContainerControlData></LeftDockingContainerControlData><RightDockingContainerControlData><DockingContainerControlData><Tabbed>false</Tabbed><Dimension>200</Dimension></DockingContainerControlData></RightDockingContainerControlData><TopDockingContainerControlData><DockingContainerControlData><Tabbed>false</Tabbed><Dimension>200</Dimension></DockingContainerControlData></TopDockingContainerControlData><BottomDockingContainerControlData><DockingContainerControlData><Tabbed>true</Tabbed><Dimension>200</Dimension></DockingContainerControlData></BottomDockingContainerControlData><TabbedDocumentContainerControlData><TabbedDocumentContainerControlData><Selected>true</Selected><SplitterSize>100</SplitterSize></TabbedDocumentContainerControlData></TabbedDocumentContainerControlData></DockingManagerControlData></DockingManagerControlData><ToolbarControlData type="innerxml"><ToolbarControlData><ShowPanelShortcuts>true</ShowPanelShortcuts><ShowToolItemMessages>true</ShowToolItemMessages><TopContainer><PanelBounds><X>0</X><Y>0</Y><Width>1279</Width><Height>74</Height></PanelBounds><ToolBars><ToolbarPersistData><Bounds><X>0</X><Y>0</Y><Width>1279</Width><Height>24</Height></Bounds><Name>Platform Main Menu</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>4</X><Y>24</Y><Width>95</Width><Height>25</Height></Bounds><Name>Edit Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Workspace_0x1779</Name><Visible>true</Visible><Text>Cut</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177A</Name><Visible>true</Visible><Text>Copy</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177B</Name><Visible>true</Visible><Text>Paste</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>99</X><Y>24</Y><Width>276</Width><Height>25</Height></Bounds><Name>Macro Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x3B_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Run Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x40_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Debug Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Break Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3C_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Reload Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Ctrl_{4D5190CD-077D-4F92-B890-4545242BF32A}_UDEWorkspace</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>375</X><Y>24</Y><Width>210</Width><Height>25</Height></Bounds><Name>File Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Workspace_0x1770</Name><Visible>true</Visible><Text>New Workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1771</Name><Visible>true</Visible><Text>Open workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1772</Name><Visible>true</Visible><Text>Save workspace as</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1773</Name><Visible>true</Visible><Text>Save workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1774</Name><Visible>true</Visible><Text>Close workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177F</Name><Visible>true</Visible><Text>Export view content</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1778</Name><Visible>true</Visible><Text>Print</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Load Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>585</X><Y>24</Y><Width>440</Width><Height>25</Height></Bounds><Name>Views Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x4_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Target Browser</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x15_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Diagnostic Message Viewer</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xF_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Console</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x0_{DED51A60-E0B7-11D4-9112-0001034962B6}</Name><Visible>true</Visible><Text>CPU Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1E_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Explore Symbols</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5C_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Single Program Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5A_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Disassembly Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x2D_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show Special Function Register</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3C_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Locals</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x46_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Watch</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Simulated I/O</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x14_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>UDE HTML</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x19_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Array Chart</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1B_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Time Traced Signal Chart</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x50_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>IP Trace Profiling</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x28_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Memory</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x46_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Call Stack</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>3</X><Y>49</Y><Width>509</Width><Height>25</Height></Bounds><Name>Debug Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x18_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show IP</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5E_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show program code</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x7_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Start Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x9_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Over</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Into</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xB_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Out</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x8_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Run Cursor</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x321_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Break Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xD_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Reset</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xC_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Restart Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Breakpoints</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x6_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Toggle Break</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Ctrl_{FB7BC773-88A4-4ECE-B9B6-7189610B0735}_Core</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{1C85B31A-5D25-4197-9635-9C5DC28EAFD7}</Name><Visible>true</Visible><Text>Trigger setup</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>512</X><Y>49</Y><Width>141</Width><Height>25</Height></Bounds><Name>Config Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x3_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Target Configuration</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xFE_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Connect Target</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x100_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Disconnect Target</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x6_{1C85B31A-5D25-4197-9635-9C5DC28EAFD7}</Name><Visible>true</Visible><Text>Setup Target Interface</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x12_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>MCU Run Control</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>653</X><Y>49</Y><Width>151</Width><Height>25</Height></Bounds><Name>Tools Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Ctrl_{377CE046-823C-4A05-8828-13C25D345D77}_Core</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xE1_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Execution Time Setup</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>100</Y><Width>26</Width><Height>25</Height></Bounds><Name>Show Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>200</Y><Width>26</Width><Height>25</Height></Bounds><Name>Window Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>225</Y><Width>26</Width><Height>25</Height></Bounds><Name>Workspace Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>275</Y><Width>26</Width><Height>25</Height></Bounds><Name>Help Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData></ToolBars></TopContainer><BottomContainer><PanelBounds><X>0</X><Y>717</Y><Width>1279</Width><Height>23</Height></PanelBounds><ToolBars><ToolbarPersistData><Bounds><X>0</X><Y>0</Y><Width>1279</Width><Height>23</Height></Bounds><Name>Platform Status Bar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData/></ToolbarPersistData></ToolBars></BottomContainer><LeftContainer><PanelBounds><X>0</X><Y>74</Y><Width>0</Width><Height>643</Height></PanelBounds><ToolBars/></LeftContainer><RightContainer><PanelBounds><X>1279</X><Y>74</Y><Width>0</Width><Height>643</Height></PanelBounds><ToolBars/></RightContainer></ToolbarControlData></ToolbarControlData></NETPlacementRoot></MainFrame><INI_SECTION type="key"><Macro type="key"><MacroLib type="string">..\..\..\..\..\Program Files\pls\UDE 4.0\StdLibrary.mso</MacroLib></Macro><Loader type="key"><LOADER_REGKEY_WSP type="string">{866f82d3-fac5-43cd-8a82-0af01e46e2c5}</LOADER_REGKEY_WSP></Loader><PLACEMENT type="key"><SFRSelectDlg type="string">669,1006,350,661</SFRSelectDlg></PLACEMENT><EXTRAVALUE type="key"><SFRSelectDlg type="int">0</SFRSelectDlg></EXTRAVALUE></INI_SECTION><AddOns type="key"><UDE.Script type="key"><MacroGuiEntries type="key"><LastScriptFilePath type="string">..\..\..\..\..\Documents and Settings\disiriog\My Documents\pls\UDE 4.0</LastScriptFilePath><Macro_21_06_13_14_56_22_0 type="key"><ScriptDescription type="string">The script contains a collection of macros to save memory content into different file formats 
+and fill target memory ranges</ScriptDescription><ScriptPath type="string">V:\UDE\AddOns\Macro\MacroLibrary\StdMacros1.dsm</ScriptPath><ScriptSource type="string">'	
+'	$Header: /Ude/AddOns/Macro/MacroLibrary/StdMacros.dsm 3     30.04.04 9:34 Weisses $
+'_______________________________________________________
+'
+'	universal debug engine
+'	 
+'	Standard command line macros - part 1 
+'
+'	pls Development Tools 1999-2004
+'
+'   28.04.04    SW     correction for UDE 1.10
+'   03.06.03    SW     initial version
+'_______________________________________________________
+
+'_______________________________________________________
+'
+'	UnAss command line function
+' 
+'	generates disassembly file 
+'
+'	command line UnAss output-file range1 [range2] [range3] .....
+'	range description:
+'		C:&lt;startaddress&gt;,&lt;length&gt; or	- code
+'		DB:&lt;startaddress&gt;,&lt;length&gt; or	- data byte
+'		DW:&lt;startaddress&gt;,&lt;length&gt; or	- data word
+'		DD:&lt;startaddress&gt;,&lt;length&gt; or	- data dword
+'_______________________________________________________
+
+Sub UnAss(File,ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	If IsNumeric(File) Then
+	  	MsgBox "File parameter wrong - " &amp; File
+		Exit Sub 		
+	End If
+	DisASMObj.OutputPath = CStr(File)
+	bRetVal = DisASMObj.CreateStream(True,"UDE Disassembler output of current Program",False)
+	If bRetVal = True Then
+		ParmeterCnt = ParameterObj.ParameterCount
+		If ParmeterCnt = 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		RangeCnt = ParmeterCnt/3
+		ParamIndex = 0
+		For Range = 0 To RangeCnt -1 
+			KindOfRange = CStr(ParameterObj.Parameter(ParamIndex)) 
+			KindOfRange = UCase(KindOfRange)
+			Address = CLng(ParameterObj.Parameter(ParamIndex +1))		
+			Length = CLng(ParameterObj.Parameter(ParamIndex +2))
+			ParamIndex = ParamIndex +3
+			If IsNumeric(KindOfRange) Then
+				If KindOfRange = 12 Then
+ 					DisASMObj.AddRange Address,Length,1
+				ElseIf KindOfRange = 219 Then
+ 					DisASMObj.AddRange Address,Length,2
+				ElseIf KindOfRange = 221 Then
+ 					DisASMObj.AddRange Address,Length,4
+				Else
+	  				MsgBox "Invalid range type " &amp; KindOfRange &amp;  "of range " &amp; Range +1
+					Exit Sub 		
+			 	End If
+			Else
+				If KindOfRange = "C" Then
+ 					DisASMObj.AddRange Address,Length,1
+				ElseIf KindOfRange = "DB" Then
+ 					DisASMObj.AddRange Address,Length,2
+				ElseIf KindOfRange = "DW" Then
+ 					DisASMObj.AddRange Address,Length,3
+				ElseIf KindOfRange = "DD" Then
+ 					DisASMObj.AddRange Address,Length,4
+				Else
+	  				MsgBox "Invalid range type " &amp; KindOfRange &amp;  "of range " &amp; Range +1
+					Exit Sub 		
+				End If
+			End If
+		Next
+		DisASMObj.HexFileModeFlag = False
+		DisASMObj.ListModeFlag = False
+		DisASMObj.WriteAllRanges(False)
+	End If
+
+End Sub
+
+'_______________________________________________________
+'
+'	SaveHEX command line function
+' 
+'	generates intel-HEX file 
+'
+'	command line SaveHex output-file range1 [range2] [range3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub SaveHEX(File,ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	If IsNumeric(File) Then
+	  	MsgBox "File parameter wrong - " &amp; File
+		Exit Sub 		
+	End If
+	DisASMObj.OutputPath = CStr(File)
+	bRetVal = DisASMObj.CreateStream(True,"UDE generated intel-Hex file of current Program",False)
+	If bRetVal = True Then
+		ParmeterCnt = ParameterObj.ParameterCount
+		If ParmeterCnt = 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		If ( ParmeterCnt Mod 2 ) &lt;&gt; 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		RangeCnt = ParmeterCnt/2
+		ParamIndex = 0
+		For Range = 0 To RangeCnt -1 
+			Address = CLng(ParameterObj.Parameter(ParamIndex))		
+			Length = CLng(ParameterObj.Parameter(ParamIndex +1))
+			ParamIndex = ParamIndex +2
+ 			DisASMObj.AddRange Address,Length,0
+		Next
+		DisASMObj.HexFileModeFlag = True
+		DisASMObj.WriteAllRanges(False)
+	End If
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillByte command line function
+' 
+'	fills memory range with byte pattern 
+'
+'	command line FillByte range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillByte(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.ByteArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1))
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillWord command line function
+' 
+'	fills memory range with word pattern 
+'
+'	command line FillWord range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillWord(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.WordArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1)/2)
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillDWord command line function
+' 
+'	fills memory range with dword pattern 
+'
+'	command line FillDWord range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillDWord(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.DWordArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1)/4)
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub</ScriptSource><ScriptArchitecture type="int">63</ScriptArchitecture><ScriptEngine type="string">VBScript</ScriptEngine><MacroFileTime type="string">24.11.2006 14:43:20:000</MacroFileTime><ScriptFromStg type="flag">1</ScriptFromStg><LocalComputerName type="string">WS_CORE_DUO</LocalComputerName><ExternalScriptPath type="string"></ExternalScriptPath><NextNodeName type="string">Macro_27_02_14_10_14_21_0</NextNodeName><UnAss type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute UnAss ..</MenuString><ToolTipString type="string">Macro UnAss</ToolTipString><MessageString type="string">Execute macro UnAss</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">2</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></UnAss><SaveHEX type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute SaveHEX ..</MenuString><ToolTipString type="string">Macro SaveHEX</ToolTipString><MessageString type="string">Execute macro SaveHEX</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">2</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></SaveHEX><FillByte type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillByte ..</MenuString><ToolTipString type="string">Macro FillByte</ToolTipString><MessageString type="string">Execute macro FillByte</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillByte><FillWord type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillWord ..</MenuString><ToolTipString type="string">Macro FillWord</ToolTipString><MessageString type="string">Execute macro FillWord</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillWord><FillDWord type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillDWord ..</MenuString><ToolTipString type="string">Macro FillDWord</ToolTipString><MessageString type="string">Execute macro FillDWord</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillDWord><NoOfFunctions type="int">5</NoOfFunctions></Macro_21_06_13_14_56_22_0></MacroGuiEntries><LastSelectedMacro type="string"></LastSelectedMacro></UDE.Script></AddOns><MultiCoreRunControl type="key"><NoOfRunCtrlGroups type="int">0</NoOfRunCtrlGroups></MultiCoreRunControl><Core type="key"><ViewSrv type="key"><PowerPcCpuWin type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW type="key"><FrameCreated type="string">21.11.2012 14:17:23:645</FrameCreated><ViewSrv type="key"/><NETFrameMode type="int">77827</NETFrameMode><NETFrameSaveIndex type="int">5</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW type="int">0</SAVED_VIEW></PowerPcCpuWin><StdUDESymbolExplWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">20.11.2012 16:19:48:344</FrameCreated><ViewSrv type="key"/><NETFrameMode type="int">77826</NETFrameMode><NETFrameSaveIndex type="int">4</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdUDESymbolExplWin><StdUDEProgWin type="key"><OPEN_VIEW00 type="key"><FrameCreated type="string">21.11.2012 12:22:49:573</FrameCreated><ViewSrv type="key"/><SourceFile type="string">..\main.c</SourceFile><Placement type="string">1,0,0,353,1094</Placement><FrameMode type="int">0</FrameMode><FrameDockState type="flag">0</FrameDockState><FrameDockFloatState type="flag">1</FrameDockFloatState><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">3</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt><SourceFileInstFlag type="int">1</SourceFileInstFlag></OPEN_VIEW00><OPEN_VIEW01 type="key"><FrameCreated type="string">13.06.2013 14:53:23:258</FrameCreated><ViewSrv type="key"/><SourceFile type="string">..\..\..\os\hal\src\hal.c</SourceFile><Placement type="string">1,49,63,402,1157</Placement><FrameMode type="int">0</FrameMode><FrameDockState type="flag">0</FrameDockState><FrameDockFloatState type="flag">1</FrameDockFloatState><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">6</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW01><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW00 type="int">0</SAVED_VIEW00><SAVED_VIEW01 type="int">2</SAVED_VIEW01><OPEN_VIEW02 type="key"><FrameCreated type="string">22.11.2012 11:31:36:807</FrameCreated><ViewSrv type="key"/><SourceFile type="string">..\..\..\os\hal\platforms\SPC5xx\SIUL_v1\pal_lld.c</SourceFile><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">4</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW02><SAVED_VIEW02 type="int">1</SAVED_VIEW02><OPEN_VIEW03 type="key"><FrameCreated type="string">21.11.2012 14:44:22:506</FrameCreated><ViewSrv type="key"/><SourceFile type="string">..\..\..\os\kernel\src\chsys.c</SourceFile><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">6</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW03><SAVED_VIEW03 type="int">3</SAVED_VIEW03></StdUDEProgWin><StdUDESFRView type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW00 type="key"><FrameCreated type="string">21.11.2012 14:14:46:537</FrameCreated><ViewSrv type="key"><SFRView type="key"><NumberOfBitFieldsPerRow type="bin" size="8">AwAAAA==</NumberOfBitFieldsPerRow><BitfieldValueMode type="bin" size="8">AQAAAA==</BitfieldValueMode><NameWidth type="bin" size="8">kAAAAA==</NameWidth><ValueWidth type="bin" size="8">YAAAAA==</ValueWidth><Bitfield1Width type="bin" size="8">TgAAAA==</Bitfield1Width><Value1Width type="bin" size="8">jQAAAA==</Value1Width><Bitfield2Width type="bin" size="8">TgAAAA==</Bitfield2Width><Value2Width type="bin" size="8">jQAAAA==</Value2Width><Bitfield3Width type="bin" size="8">TgAAAA==</Bitfield3Width><Value3Width type="bin" size="8">jgAAAA==</Value3Width><Bitfield4Width type="bin" size="8">AAAAAA==</Bitfield4Width><Value4Width type="bin" size="8">AAAAAA==</Value4Width><TopIndex type="bin" size="8">AAAAAA==</TopIndex><CaretIndex type="bin" size="8">AAAAAA==</CaretIndex></SFRView></ViewSrv><NETFrameMode type="int">77825</NETFrameMode><NETFrameSaveIndex type="int">2</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW00><SAVED_VIEW00 type="int">0</SAVED_VIEW00><OPEN_VIEW01 type="key"/></StdUDESFRView><StdUDELocalsWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS><OPEN_VIEW type="key"><FrameCreated type="string">21.11.2012 14:10:10:424</FrameCreated><ViewSrv type="key"><NameWidth type="int">538</NameWidth><AddressWidth type="int">0</AddressWidth><ValueWidth type="int">360</ValueWidth><Value2Width type="int">0</Value2Width><MinMaxWidth type="int">0</MinMaxWidth></ViewSrv><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">5</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW type="int">0</SAVED_VIEW></StdUDELocalsWin><StdUDEWatchWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEWatchWin><StdUDESimIOWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDESimIOWin><StdUDEHtmlDocWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEHtmlDocWin><StdUDEGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEGraphWin><StdUDETimeSampleGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDETimeSampleGraphWin><UDEProfilingWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDEProfilingWin><StdUDEMemWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEMemWin><StdUDEIPTraceGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEIPTraceGraphWin><UDETraceCoverageWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDETraceCoverageWin><UDETraceProfilingWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDETraceProfilingWin><UDEStackWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDEStackWin></ViewSrv><UDE.StdDbgSrv type="key"><INI_SECTION type="key"><System type="key"><MIXEDMODE type="string">OFF</MIXEDMODE></System></INI_SECTION><UDE.PowerPcArchSrv type="key"><UDE.PpcJtagTargIntf type="key"><NewWorkspace type="flag">0</NewWorkspace></UDE.PpcJtagTargIntf></UDE.PowerPcArchSrv><UDE.UDESymbol type="key"><DefaultBinFileDir type="string">..\build</DefaultBinFileDir><BinFileDialogParam type="key"><Filter type="int">1</Filter></BinFileDialogParam><BinaryFiles type="key"><Number type="int">1</Number><BinaryFile1 type="key"><FullPath type="string">..\build\ch.elf</FullPath><SourceAliases type="key"/><Breakpoints type="key"><Breakpoint1 type="string">Software;enabled;0;disabled;'main {C:\ChibiStudio\chibios\demos\PPC-SPC560D-GCC\main.c} .164';main.c;1;0;;$disabled; ;disabled; ;</Breakpoint1><Number type="int">1</Number></Breakpoints></BinaryFile1><BinaryFile-1 type="key"/></BinaryFiles><MultiCoreLoader type="key"><Number type="int">0</Number></MultiCoreLoader><ExpressionClipboard type="key"><Number type="int">0</Number></ExpressionClipboard></UDE.UDESymbol><STG_ADDON_PROF type="key"><UDE_Graphwin_Trace_AddOn type="key" name="UDE Graphwin Trace AddOn"><LOAD_STATE type="flag">1</LOAD_STATE></UDE_Graphwin_Trace_AddOn><UDELicense_Server type="key" name="UDELicense Server"><LOAD_STATE type="flag">1</LOAD_STATE></UDELicense_Server><UDEMemtool type="key"><LOAD_STATE type="flag">1</LOAD_STATE><FlashMod_PFLASH type="key"><Enabled type="flag">1</Enabled></FlashMod_PFLASH><FlashMod_DFLASH type="key"/><FlashMod_SHADOWFLASH type="key"/><Frontend type="key"><LastModule type="int">0</LastModule><VerifyProt type="flag">0</VerifyProt><VerifyProtFile type="string">verify.txt</VerifyProtFile><VerifyOnExit type="flag">0</VerifyOnExit><StoreLoadedSections type="flag">0</StoreLoadedSections><AutoStartProgAfterDownload type="flag">0</AutoStartProgAfterDownload><AutoCloseExecCmdDialog type="flag">0</AutoCloseExecCmdDialog><AllowOverwrite type="flag">0</AllowOverwrite></Frontend></UDEMemtool><ADD_ON_DEL_FLAG type="flag">0</ADD_ON_DEL_FLAG></STG_ADDON_PROF><CommQueueHndlStg type="key"><Beep type="flag">0</Beep><Retry type="flag">0</Retry><RetryPeriod type="int">0</RetryPeriod></CommQueueHndlStg><TargetStateHndlStg type="key"/></UDE.StdDbgSrv><MRUSourceFileList type="key"><NoOfMRUSrcFileEntries type="int">1</NoOfMRUSrcFileEntries><MRUSrcFile0 type="string">..\main.c</MRUSrcFile0></MRUSourceFileList></Core><TargetInfoFile type="string">stm_xpc560b_spc560d40_minimodule_debug_jtag.cfg</TargetInfoFile><LastWriteDate type="string">27.02.2014 10:14:20:999</LastWriteDate></stg>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/UDE/stm_xpc560b_spc560d40_minimodule_debug_jtag.cfg b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/UDE/stm_xpc560b_spc560d40_minimodule_debug_jtag.cfg
new file mode 100644
index 0000000..17bab70
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/UDE/stm_xpc560b_spc560d40_minimodule_debug_jtag.cfg
@@ -0,0 +1,165 @@
+[Main]
+Signature=UDE_TARGINFO_2.0
+Description=STM XPC560B Mini Module with SPC560D40 (Jtag)
+Description1=PLL set for 48MHz
+Description2=FLASH programming prepared but not enabled
+Description3=Write Filter for BAM Module
+MCUs=Controller0
+Architecture=PowerPC
+Vendor=STM
+Board=XPC560B Mini Module
+
+[Controller0]
+Family=PowerPC
+Type=SPC560D40
+Enabled=1
+IntClock=48000
+MemDevs=BAMWriteFilter
+ExtClock=8000
+
+[Controller0.Core]
+Protocol=PPCJTAG
+Enabled=1
+
+[Controller0.Core.LoadedAddOn]
+UDEMemtool=1
+
+[Controller0.Core.PpcJtagTargIntf]
+PortType=FTDI
+ResetWaitTime=50
+MaxJtagClk=2500
+DoSramInit=1
+UseNexus=1
+AdaptiveJtagPhaseShift=1
+ConnOption=Default
+ChangeJtagClk=10000
+HaltAfterReset=1
+SimioAddr=g_JtagSimioAccess
+FreezeTimers=1
+InvalidTlbOnReset=0
+InvalidateCache=0
+ForceCacheFlush=0
+IgnoreLockedLines=0
+ExecInitCmds=1
+JtagTapNumber=0
+JtagNumOfTaps=1
+JtagNumIrBefore=0
+JtagNumIrAfter=0
+
+SimioAddr=g_JtagSimioAccess
+
+FlushCache=0
+AllowMmuSetup=1
+UseExtReset=1
+HandleWdtBug=0
+ForceEndOfReset=0
+JtagViaPod=0
+AllowResetOnCheck=0
+ChangeMsr=0
+ChangeMsrValue=0x0
+ExecOnStartCmds=0
+ExecOnHaltCmds=0
+TargetPort=Default
+EnableProgramTimeMeasurement=0
+UseHwResetMode=1
+HandleNexusAccessBug=0
+DoNotEnableTrapSwBrp=0
+CommDevSel=PortType=USB,Type=FTDI
+BootPasswd0=0xFEEDFACE
+BootPasswd1=0xCAFEBEEF
+BootPasswd2=0xFFFFFFFF
+BootPasswd3=0xFFFFFFFF
+BootPasswd4=0xFFFFFFFF
+BootPasswd5=0xFFFFFFFF
+BootPasswd6=0xFFFFFFFF
+BootPasswd7=0xFFFFFFFF
+JtagIoType=Jtag
+ExecOnHaltCmdsWhileHalted=0
+TimerForPTM=Default
+AllowBreakOnUpdateBreakpoints=0
+ClearDebugStatusOnHalt=1
+HwResetMode=Simulate
+UseMasterNexusIfResetState=1
+UseLocalAddressTranslation=1
+Use64BitNexus=0
+InitSramOnlyWhenNotInitialized=0
+AllowHarrForUpdateDebugRegs=0
+DisableE2EECC=0
+UseCore0ForNexusMemoryAccessWhileRunning=0
+ExecOnConnectCmds=0
+HaltOnDnh=1
+AlwaysHaltOnDni=1
+HandleOvRamInitViaNarWorkaround=0
+
+[Controller0.Core.PpcJtagTargIntf.InitScript]
+// setup IVOPR
+// points to internal memory at 0x40000000
+SETSPR 0x3F 0x40000000 0xFFFFFFFF
+
+// disable watchdog
+SET SWT_SR 0xC520
+SET SWT_SR 0xD928
+SET SWT_CR 0xFF00000A
+
+// Oscillator select
+SET CGM_OCDS_SC 0x1000000
+SET CGM_OC_EN 0x1
+
+// enable all modes
+SET ME_MER 0x5FF
+
+// run mode
+SET ME_DRUN_MC 0x1F0032
+SET ME_RUN_PC0 0xFE
+
+// enable peripherals in run and low power modes
+SET ME_LP_PC0 0x500
+
+// enable clocks
+SET8 CGM_SC_DC0 0x80
+SET8 CGM_SC_DC1 0x80
+SET8 CGM_SC_DC2 0x80
+
+// setup clock monitor
+SET CMU_CSR 0x6
+SET CMU_LFREFR 0x1
+SET CMU_HFREFR 0xFFE
+
+// Make DRUN configuration active
+SET ME_MCTL 0x30005AF0
+SET ME_MCTL 0x3000A50F
+WAIT 0x5
+
+// setup pll to 48MHz
+SET FMPLL_CR 0x5300041 0xFFFFFFFF
+// run mode
+SET ME_DRUN_MC 0x1F00F4
+
+// Make DRUN configuration active
+SET ME_MCTL 0x30005AF0
+SET ME_MCTL 0x3000A50F
+WAIT 0x5
+
+// setup SSCM erro cfg for debug
+SET16 SSCM_ERROR 0x3 0x3
+
+[Controller0.BAMWriteFilter]
+Description=BAM WriteAccess Filter
+Range0Start=0xFFFFC000
+Range0Size=0x4000
+Enabled=1
+Handler=AccessFilter
+Mode=ReadOnly
+
+[Controller0.PFLASH]
+Enabled=1
+EnableMemtoolByDefault=1
+
+[Controller0.DFLASH]
+Enabled=1
+EnableMemtoolByDefault=1
+
+[Controller0.Core.PpcJtagTargIntf.OnStartScript]
+
+[Controller0.Core.PpcJtagTargIntf.OnHaltScript]
+[Controller0.Core.PpcJtagTargIntf.OnConnectScript]
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/chconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/chconf.h
new file mode 100644
index 0000000..f6244ad
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/cw/ch/ch.lcf b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/cw/ch/ch.lcf
new file mode 100644
index 0000000..0596ad3
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/cw/ch/ch.lcf
@@ -0,0 +1,156 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio.
+
+    This file is part of ChibiOS.
+
+    ChibiOS is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 3 of the License, or
+    (at your option) any later version.
+
+    ChibiOS is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * SPC560D40 memory setup.
+ */
+MEMORY
+{
+    rom       : org = 0x00000000, len = 0x00040000
+    dataflash : org = 0x00800000, len = 0x00010000
+    ram       : org = 0x40000000, len = 0x00004000
+}
+
+__irq_stack_size__     = 0;
+__process_stack_size__ = 0x1000;
+
+__ram_size__  = SIZEOF(ram);
+__ram_start__ = ADDR(ram);
+__ram_end__   = ADDR(ram) + SIZEOF(ram);
+
+SECTIONS
+{
+  GROUP:
+  {
+    .boot ALIGN(16):
+    {
+      KEEP(*(.boot))
+    }
+    
+    .handlers (VLECODE) ALIGN(4): {
+      KEEP(*(.handlers))
+    }
+
+    .crt0 (VLECODE) ALIGN(4): {
+      *(.crt0)
+    }
+
+    .init: {}
+    .init_vle (VLECODE) ALIGN(4):
+    {
+       *(.init)
+       *(.init_vle)
+    }
+
+    .vectors ALIGN(0x800):
+    {
+      KEEP(*(.vectors))
+    }
+    
+    .ivors (VLECODE) ALIGN(0x1000):
+    {
+      __ivpr_base__ = .;
+      KEEP(*(.ivors))
+    }
+
+    .code (VLECODE) ALIGN(16):
+    {
+      *(.text)
+      *(.text_vle)
+    }
+
+    .const (CONST) ALIGN(16):
+    {
+      *(.rdata)
+      *(.rodata)
+    }
+
+    .sdata2 (CONST) ALIGN(16):
+    {
+      __sdata2_start__ = . + 0x8000;
+      *(.sdata2)
+      *(.sbss2)
+    }
+
+   .ctors: {}
+   .dtors: {}
+    extab: {}
+    extabindex: {}
+
+    . = ALIGN(4);
+    __romdata_start__ = .;
+  } > rom
+
+  GROUP:
+  {
+    .stacks:
+    {
+        . = ALIGN(8);
+        __irq_stack_base__ = .;
+        . = . + __irq_stack_size__;
+        . = ALIGN(8);
+        __irq_stack_end__ = .;
+        __process_stack_base__ = .;
+        __main_thread_stack_base__ = .;
+        . = . + __process_stack_size__;
+        . = ALIGN(8);
+        __process_stack_end__ = .;
+        __main_thread_stack_end__ = .;
+    }
+
+    .data (DATA) LOAD(__romdata_start__):
+    {
+        . = ALIGN(4);
+        __data_start__ = .;
+        *(.data)
+        . = ALIGN(4);
+    }
+
+    .sdata (DATA) LOAD(ROMADDR(.data) + SIZEOF(.data)):
+    {
+        __sdata_start__ = . + 0x8000;
+        *(.sdata)
+        __data_end__ = .;
+    }
+
+    .sbss (BSS):
+    {
+        __bss_start__ = .;
+        *(.sbss)
+    }
+
+    .bss (BSS):
+    {
+        *(.bss)
+        __bss_end__ = .;
+    }
+
+    /* The default heap uses the (statically) unused part of a RAM section.*/
+    .heap:
+    {
+      . = ALIGN(8);
+      __heap_base__ = .;
+      . = ADDR(ram) + SIZEOF(ram);
+      __heap_end__ = .;
+    }
+
+    .PPC.EMB.sdata0: {}
+    .PPC.EMB.sbss0: {}
+  } > ram
+}
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/cw/ch/ch.mcp b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/cw/ch/ch.mcp
new file mode 100644
index 0000000..6ad5431
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/cw/ch/ch.mcp
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/halconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/halconf.h
new file mode 100644
index 0000000..6827953
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/halconf.h
@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM                  FALSE
+#endif
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/main.c b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/main.c
new file mode 100644
index 0000000..957f0e8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/main.c
@@ -0,0 +1,202 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+#include "shell.h"
+#include "chprintf.h"
+
+#define SHELL_WA_SIZE   THD_WORKING_AREA_SIZE(1024)
+#define TEST_WA_SIZE    THD_WORKING_AREA_SIZE(256)
+
+static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
+  size_t n, size;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: mem\r\n");
+    return;
+  }
+  n = chHeapStatus(NULL, &size);
+  chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX());
+  chprintf(chp, "heap fragments   : %u\r\n", n);
+  chprintf(chp, "heap free total  : %u bytes\r\n", size);
+}
+
+static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
+  static const char *states[] = {CH_STATE_NAMES};
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: threads\r\n");
+    return;
+  }
+  chprintf(chp, "    addr    stack prio refs     state time\r\n");
+  tp = chRegFirstThread();
+  do {
+    chprintf(chp, "%08lx %08lx %4lu %4lu %9s\r\n",
+            (uint32_t)tp, (uint32_t)tp->p_ctx.sp,
+            (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
+            states[tp->p_state]);
+    tp = chRegNextThread(tp);
+  } while (tp != NULL);
+}
+
+static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: test\r\n");
+    return;
+  }
+  tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(),
+                           TestThread, chp);
+  if (tp == NULL) {
+    chprintf(chp, "out of memory\r\n");
+    return;
+  }
+  chThdWait(tp);
+}
+
+static const ShellCommand commands[] = {
+  {"mem", cmd_mem},
+  {"threads", cmd_threads},
+  {"test", cmd_test},
+  {NULL, NULL}
+};
+
+static const ShellConfig shell_cfg1 = {
+  (BaseSequentialStream *)&SD1,
+  commands
+};
+
+/*
+ * LEDs blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+
+  while (true) {
+    unsigned i;
+
+    for (i = 0; i < 4; i++) {
+      palClearPad(PORT_E, PE_LED1);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT_E, PE_LED2);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT_E, PE_LED3);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT_E, PE_LED4);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_E, PE_LED1);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_E, PE_LED2);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_E, PE_LED3);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_E, PE_LED4);
+      chThdSleepMilliseconds(300);
+    }
+
+    for (i = 0; i < 4; i++) {
+      palTogglePort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) |
+                            PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4));
+      chThdSleepMilliseconds(500);
+      palTogglePort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) |
+                            PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4));
+      chThdSleepMilliseconds(500);
+    }
+
+    for (i = 0; i < 4; i++) {
+      palTogglePad(PORT_E, PE_LED1);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_E, PE_LED1);
+      palTogglePad(PORT_E, PE_LED2);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_E, PE_LED2);
+      palTogglePad(PORT_E, PE_LED3);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_E, PE_LED3);
+      palTogglePad(PORT_E, PE_LED4);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_E, PE_LED4);
+    }
+
+    for (i = 0; i < 4; i++) {
+      palClearPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED3));
+      palSetPort(PORT_E, PAL_PORT_BIT(PE_LED2) | PAL_PORT_BIT(PE_LED4));
+      chThdSleepMilliseconds(500);
+      palClearPort(PORT_E, PAL_PORT_BIT(PE_LED2) | PAL_PORT_BIT(PE_LED4));
+      palSetPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED3));
+      chThdSleepMilliseconds(500);
+    }
+
+    palSetPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) |
+                       PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4));
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+  thread_t *shelltp = NULL;
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Shell manager initialization.
+   */
+  shellInit();
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   */
+  sdStart(&SD1, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity.
+   */
+  while (true) {
+    if (!shelltp)
+      shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
+    else if (chThdTerminatedX(shelltp)) {
+      chThdRelease(shelltp);    /* Recovers memory of the previous shell.   */
+      shelltp = NULL;           /* Triggers spawning of a new shell.        */
+    }
+    chThdSleepMilliseconds(1000);
+  }
+  return 0;
+}
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/mcuconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/mcuconf.h
new file mode 100644
index 0000000..0b48d33
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560D-EVB/mcuconf.h
@@ -0,0 +1,153 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * SPC560B/Cxx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 1...15       Lowest...Highest.
+ * DMA priorities:
+ * 0...15       Highest...Lowest.
+ */
+
+#define SPC560Dxx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define SPC5_NO_INIT                        FALSE
+#define SPC5_ALLOW_OVERCLOCK                FALSE
+#define SPC5_DISABLE_WATCHDOG               TRUE
+#define SPC5_FMPLL0_IDF_VALUE               1
+#define SPC5_FMPLL0_NDIV_VALUE              48
+#define SPC5_FMPLL0_ODF                     SPC5_FMPLL_ODF_DIV8
+#define SPC5_XOSCDIV_VALUE                  1
+#define SPC5_IRCDIV_VALUE                   1
+#define SPC5_PERIPHERAL1_CLK_DIV_VALUE      2
+#define SPC5_PERIPHERAL2_CLK_DIV_VALUE      2
+#define SPC5_PERIPHERAL3_CLK_DIV_VALUE      2
+#define SPC5_CLOCK_FAILURE_HOOK()           osalSysHalt("clock failure")
+
+#define SPC5_EMIOS0_GPRE_VALUE              20
+
+/*
+ * EDMA driver settings.
+ */
+#define SPC5_EDMA_CR_SETTING                (EDMA_CR_EMLM)
+#define SPC5_EDMA_GROUP0_PRIORITIES         0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+#define SPC5_EDMA_ERROR_IRQ_PRIO            12
+#define SPC5_EDMA_ERROR_HANDLER()           osalSysHalt("DMA failure")
+
+/*
+ * SERIAL driver system settings.
+ */
+#define SPC5_SERIAL_USE_LINFLEX0            TRUE
+#define SPC5_SERIAL_USE_LINFLEX1            FALSE
+#define SPC5_SERIAL_USE_LINFLEX2            FALSE
+#define SPC5_SERIAL_LINFLEX0_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX1_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX2_PRIORITY       8
+
+/*
+ * SPI driver system settings.
+ */
+#define SPC5_SPI_USE_DSPI0                  FALSE
+#define SPC5_SPI_USE_DSPI1                  FALSE
+#define SPC5_SPI_DMA_MODE                   SPC5_SPI_DMA_RX_ONLY
+#define SPC5_SPI_DSPI0_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3 | SPC5_MCR_PCSIS4 | SPC5_MCR_PCSIS5)
+#define SPC5_SPI_DSPI1_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3 | SPC5_MCR_PCSIS4)
+#define SPC5_SPI_DSPI0_TX1_DMA_CH_ID        4
+#define SPC5_SPI_DSPI0_TX2_DMA_CH_ID        5
+#define SPC5_SPI_DSPI0_RX_DMA_CH_ID         6
+#define SPC5_SPI_DSPI1_TX1_DMA_CH_ID        7
+#define SPC5_SPI_DSPI1_TX2_DMA_CH_ID        8
+#define SPC5_SPI_DSPI1_RX_DMA_CH_ID         9
+#define SPC5_SPI_DSPI0_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI1_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI0_IRQ_PRIO             10
+#define SPC5_SPI_DSPI1_IRQ_PRIO             10
+#define SPC5_SPI_DMA_ERROR_HOOK(spip)       osalSysHalt("DSPI DMA failure")
+
+/*
+ * ICU-PWM driver system settings.
+ */
+#define SPC5_ICU_USE_EMIOS0_CH0             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH1             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH2             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH3             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH4             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH5             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH6             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH7             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH24            FALSE
+
+#define SPC5_PWM_USE_EMIOS0_GROUP0          FALSE
+#define SPC5_PWM_USE_EMIOS0_GROUP1          FALSE
+
+#define SPC5_EMIOS0_GFR_F0F1_PRIORITY       8
+#define SPC5_EMIOS0_GFR_F2F3_PRIORITY       8
+#define SPC5_EMIOS0_GFR_F4F5_PRIORITY       8
+#define SPC5_EMIOS0_GFR_F6F7_PRIORITY       8
+#define SPC5_EMIOS0_GFR_F8F9_PRIORITY       8
+#define SPC5_EMIOS0_GFR_F10F11_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F12F13_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F14F15_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F16F17_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F18F19_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F20F21_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F22F23_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F24F25_PRIORITY     8
+
+#define SPC5_EMIOS0_START_PCTL              (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_EMIOS0_STOP_PCTL               (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+/*
+ * CAN driver system settings.
+ */
+#define SPC5_CAN_USE_FILTERS                FALSE
+
+#define SPC5_CAN_USE_FLEXCAN0               FALSE
+#define SPC5_CAN_FLEXCAN0_USE_EXT_CLK       FALSE
+#define SPC5_CAN_FLEXCAN0_PRIORITY          12
+#define SPC5_CAN_FLEXCAN0_START_PCTL        (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_CAN_FLEXCAN0_STOP_PCTL         (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+                                             
+/*
+* ADC driver system settings.
+*/
+#define SPC5_ADC_USE_ADC1                   FALSE
+#define SPC5_ADC_ADC1_CLK_FREQUENCY         HALF_PERIPHERAL_SET_CLOCK_FREQUENCY
+#define SPC5_ADC_ADC1_AUTO_CLOCK_OFF        FALSE
+#define SPC5_ADC_ADC1_WD_PRIORITY           12
+#define SPC5_ADC_ADC1_DMA_CH_ID             2
+#define SPC5_ADC_ADC1_DMA_IRQ_PRIO          12
+#define SPC5_ADC_ADC1_START_PCTL            (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_ADC_ADC1_STOP_PCTL             (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/.cproject b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/.cproject
new file mode 100644
index 0000000..9573eb3
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/.cproject
@@ -0,0 +1,57 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.665946016">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.665946016" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.665946016" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.665946016." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1131493307" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1131493307.1844928918" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1106552272" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1064008669" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.2048166271" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1577341141" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.841305605" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.954135725" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.287919901" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1061591135" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-SPC560P-EVB.null.2129661677" name="RT-SPC560P-EVB"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.665946016">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-SPC560P-EVB"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/.project b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/.project
new file mode 100644
index 0000000..d27d6eb
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-SPC560P-EVB</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_EVB_SPC560P</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/Makefile b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/Makefile
new file mode 100644
index 0000000..65fef8d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/Makefile
@@ -0,0 +1,188 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -mno-spe -msoft-float
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data.
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT =
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = no
+endif
+
+# If enabled, this option allows to compile the application in VLE mode.
+ifeq ($(USE_VLE),)
+  USE_VLE = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the optional exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/e200/compilers/GCC/mk/startup_spc560pxx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/boards/ST_EVB_SPC560P/board.mk
+include $(CHIBIOS)/os/hal/ports/SPC5/SPC560Pxx/platform.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/e200/compilers/GCC/mk/port.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/SPC560P50.ld
+
+# C sources here.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       $(CHIBIOS)/os/hal/lib/streams/memstreams.c \
+       $(CHIBIOS)/os/hal/lib/streams/chprintf.c \
+       $(CHIBIOS)/os/various/shell.c \
+       main.c
+
+# C++ sources here.
+CPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+#MCU  = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames
+MCU  = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames
+
+#TRGT = powerpc-eabi-
+TRGT = ppc-vle-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+MOT  = $(CP) -O srec
+BIN  = $(CP) -O binary
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/e200/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/UDE/debug.wsx b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/UDE/debug.wsx
new file mode 100644
index 0000000..a7ed9df
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/UDE/debug.wsx
@@ -0,0 +1,273 @@
+<?xml version="1.0" encoding="ISO-8859-1"?>
+<stg format="2.0">
+	<OriginalWsp type="string">debug.wsx</OriginalWsp><BackupWspFlag type="flag">0</BackupWspFlag><UseWspCnt type="int">0</UseWspCnt><WspCloseCnt type="int">0</WspCloseCnt><ProdInfo type="bin" size="52">vQTv/gAAAQAXAAIA8QkPAAAABAAAAAAAPwAAAAAAAAAEAAAAAgAAAAAAAAAAAAAAAAAAAA==</ProdInfo><ProdInfoString type="string">4.0</ProdInfoString><CreationDate type="string">29.10.2012 12:15:07:999</CreationDate><MainFrame type="key"><PersistTreeRoot type="key"><DesktopState type="key"><Placement type="key"><MainFrame type="string">MCAAAAAAAAAAAAAABAAAAAAAPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPHHAAAAAAPBAAAAAADGFAAAAABCDAAAAA</MainFrame><WorkbookMode type="string">False</WorkbookMode><DockStateSaved type="string">True</DockStateSaved></Placement><DockState type="key"><Bars type="string">14</Bars><ScreenCX type="string">1680</ScreenCX><ScreenCY type="string">1050</ScreenCY><Bar-0 type="key"><BarID type="string">59393</BarID><Style type="string">32768</Style><ExStyle type="string">0</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">1000000</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">0</MRUHorzDockCX><MRUHorzDockCY type="string">0</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">0</DockingStyle><TypeID type="string">0</TypeID><ClassName type="string">UDEStatusBar</ClassName><WindowName type="string">For Help, press F1</WindowName><ResourceID type="string">0</ResourceID></Bar-0><Bar-1 type="key"><BarID type="string">59419</BarID><Bars type="string">12</Bars><Bar_0 type="string" name="Bar#0">0</Bar_0><Bar_1 type="string" name="Bar#1">59647</Bar_1><Bar_2 type="string" name="Bar#2">0</Bar_2><Bar_3 type="string" name="Bar#3">59398</Bar_3><Bar_4 type="string" name="Bar#4">59397</Bar_4><Bar_5 type="string" name="Bar#5">59403</Bar_5><Bar_6 type="string" name="Bar#6">59401</Bar_6><Bar_7 type="string" name="Bar#7">59406</Bar_7><Bar_8 type="string" name="Bar#8">0</Bar_8><Bar_9 type="string" name="Bar#9">59399</Bar_9><Bar_10 type="string" name="Bar#10">59402</Bar_10><Bar_11 type="string" name="Bar#11">0</Bar_11><Style type="string">0</Style><ExStyle type="string">0</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">0</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">0</MRUHorzDockCX><MRUHorzDockCY type="string">0</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">0</DockingStyle><TypeID type="string">0</TypeID><ClassName type="string">CUDEDockBar</ClassName><WindowName type="string"></WindowName><ResourceID type="string">0</ResourceID></Bar-1><Bar-2 type="key"><BarID type="string">59422</BarID><Bars type="string">3</Bars><Bar_0 type="string" name="Bar#0">0</Bar_0><Bar_1 type="string" name="Bar#1">9110</Bar_1><Bar_2 type="string" name="Bar#2">0</Bar_2><Style type="string">0</Style><ExStyle type="string">0</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">0</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">0</MRUHorzDockCX><MRUHorzDockCY type="string">0</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">0</DockingStyle><TypeID type="string">0</TypeID><ClassName type="string">CUDEDockBar</ClassName><WindowName type="string"></WindowName><ResourceID type="string">0</ResourceID></Bar-2><Bar-3 type="key"><BarID type="string">59420</BarID><Bars type="string">3</Bars><Bar_0 type="string" name="Bar#0">0</Bar_0><Bar_1 type="string" name="Bar#1">9100</Bar_1><Bar_2 type="string" name="Bar#2">0</Bar_2><Style type="string">0</Style><ExStyle type="string">0</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">0</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">0</MRUHorzDockCX><MRUHorzDockCY type="string">0</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">0</DockingStyle><TypeID type="string">0</TypeID><ClassName type="string">CUDEDockBar</ClassName><WindowName type="string"></WindowName><ResourceID type="string">0</ResourceID></Bar-3><Bar-4 type="key"><BarID type="string">59647</BarID><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">0</MRUDockLeftPos><MRUDockTopPos type="string">0</MRUDockTopPos><MRUDockRightPos type="string">1252</MRUDockRightPos><MRUDockBottomPos type="string">27</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12220</Style><ExStyle type="string">908</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">1000000</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">1252</MRUHorzDockCX><MRUHorzDockCY type="string">27</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14947</TypeID><ClassName type="string">UDEMDIMenuBar</ClassName><WindowName type="string">Menu bar</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Menu bar</Title><Buttons type="string">BAAAAAAIAACAAAAAAIAADAAAAAAIAAEAAAAAAIAAFAAAAAAIAAGAAAAAAIAAHAAAAAAIAAIAAAAAAIAAJAAAAAAIAAKAAAAAAIAA</Buttons></ToolBarInfoEx></Bar-4><Bar-5 type="key"><BarID type="string">59398</BarID><YPos type="string">26</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">0</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">111</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">62500</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">111</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Edit</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Edit</Title><NewButtons_BinCount type="string">2</NewButtons_BinCount><NewButtons_BinVal0 type="string">DCBOAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAACCBOAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAFCBOAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAIABOAAAAAAPPPPPPPPAAAAAAAAAA</NewButtons_BinVal0><NewButtons_BinVal1 type="string">AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAA</NewButtons_BinVal1></ToolBarInfoEx></Bar-5><Bar-6 type="key"><BarID type="string">59397</BarID><XPos type="string">110</XPos><YPos type="string">26</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">110</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">290</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">62500</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">180</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">File</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">File</Title><NewButtons_BinCount type="string">3</NewButtons_BinCount><NewButtons_BinVal0 type="string">AHHBAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAABHHBAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAACHHBAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAADHHBAAAAAAPPPPPPPPAAAAAAAAAA</NewButtons_BinVal0><NewButtons_BinVal1 type="string">AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAEHHBAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAFHHBAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAOKHBAAAAAABAAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAA</NewButtons_BinVal1><NewButtons_BinVal2 type="string">AAPPPPPPPPAAAAAAAA</NewButtons_BinVal2></ToolBarInfoEx></Bar-6><Bar-7 type="key"><BarID type="string">59403</BarID><XPos type="string">290</XPos><YPos type="string">26</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">290</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">424</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">1002</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">125000</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">134</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Config</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Config</Title><NewButtons_BinCount type="string">2</NewButtons_BinCount><NewButtons_BinVal0 type="string">GJHBAAAAAADAAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAAMMHBAAAAAAOPAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAANMHBAAAAAAAABAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAAFNHBAAAAAAGAAAAAAAKBDLFIMBFC</NewButtons_BinVal0><NewButtons_BinVal1 type="string">NFHJBEGJFDMJNFCMOIPKHNAAAAAAAAPPPPPPPPAAAAAAAAINHBAAAAAACBAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAA</NewButtons_BinVal1></ToolBarInfoEx></Bar-7><Bar-8 type="key"><BarID type="string">59401</BarID><XPos type="string">424</XPos><YPos type="string">26</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">424</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">903</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">1002</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">250000</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">479</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Views</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Views</Title><NewButtons_BinCount type="string">6</NewButtons_BinCount><NewButtons_BinVal0 type="string">JJHBAAAAAAFBAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAAKJHBAAAAAAPAAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAAMJHBAAAAAAGBAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAANKHBAAAAAAAAAAAAAAAGKBFNONHL</NewButtons_BinVal0><NewButtons_BinVal1 type="string">AOENBBBJCBAABADAJECGGLAAAAAAAAPPPPPPPPAAAAAAAAALHBAAAAAAKAAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAACLHBAAAAAAMFAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAADLHBAAAAAAKFAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAA</NewButtons_BinVal1><NewButtons_BinVal2 type="string">AAPPPPPPPPAAAAAAAAFLHBAAAAAANCAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAAGLHBAAAAAAMDAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAAHLHBAAAAAAGEAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAAAMHBAAAAAA</NewButtons_BinVal2><NewButtons_BinVal3 type="string">KAAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAABMHBAAAAAAEBAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAACMHBAAAAAAJBAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAADMHBAAAAAALBAAAAAAKEMNADOLNFNPBMHEJJNE</NewButtons_BinVal3><NewButtons_BinVal4 type="string">MIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAAEMHBAAAAAAAFAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAAFMHBAAAAAAICAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAAIMHBAAAAAANEEAAAAAJEOEILFFBLMIPBEEPLLMEDEOPKHPBGJHAAAAAAAAPPPPPPPP</NewButtons_BinVal4><NewButtons_BinVal5 type="string">AAAAAAAAJMHBAAAAAAGFEAAAAAJEOEILFFBLMIPBEEPLLMEDEOPKHPBGJHAAAAAAAAPPPPPPPPAAAAAAAAKMHBAAAAAAAGEAAAAAJEOEILFFBLMIPBEEPLLMEDEOPKHPBGJHAAAAAAAAPPPPPPPPAAAAAAAALMHBAAAAAAGEAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAA</NewButtons_BinVal5></ToolBarInfoEx></Bar-8><Bar-9 type="key"><BarID type="string">59406</BarID><XPos type="string">903</XPos><YPos type="string">26</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">903</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">1149</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">500000</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">246</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Macro</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Macro</Title><NewButtons_BinCount type="string">2</NewButtons_BinCount><NewButtons_BinVal0 type="string">DKHBAAAAAALDAAAAAAGDHJMPFPDOOJLAGELLAIHGBMMEFJBIPLAAAAAAAAPPPPPPPPAAAAAAAAEKHBAAAAAAAEAAAAAAGDHJMPFPDOOJLAGELLAIHGBMMEFJBIPLAAAAAAAAPPPPPPPPAAAAAAAAGKHBAAAAAAMDAAAAAAGDHJMPFPDOOJLAGELLAIHGBMMEFJBIPLAAAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAAA</NewButtons_BinVal0><NewButtons_BinVal1 type="string">AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAMKHBAAAACAGJAAAAAAAAAANMAJBFNENHHACJPEILAJFEFEECLCDPKCBAAAAAAAKAAAAAAANAAAAAAAFFEEFEHFPGCHLGDHAHBGDGFGAA</NewButtons_BinVal1></ToolBarInfoEx></Bar-9><Bar-10 type="key"><BarID type="string">59399</BarID><YPos type="string">56</YPos><MRUWidth type="string">504</MRUWidth><Docking type="string">True</Docking><MRUDockID type="string">59419</MRUDockID><MRUDockLeftPos type="string">0</MRUDockLeftPos><MRUDockTopPos type="string">56</MRUDockTopPos><MRUDockRightPos type="string">504</MRUDockRightPos><MRUDockBottomPos type="string">86</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">600000</PctWidth><MRUFloatCX type="string">504</MRUFloatCX><MRUFloatCY type="string">30</MRUFloatCY><MRUHorzDockCX type="string">504</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">39</MRUVertDockCX><MRUVertDockCY type="string">315</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Debug</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Debug</Title><NewButtons_BinCount type="string">5</NewButtons_BinCount><NewButtons_BinVal0 type="string">BLHBAAAAAAIBAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAAELHBAAAAAAOFAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAAILHBAAAAAAHAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAJLHBAAAAAAJAAAAAAABINLNCJGPD</NewButtons_BinVal0><NewButtons_BinVal1 type="string">KECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAKLHBAAAAAAKAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAALLHBAAAAAALAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAMLHBAAAAAAIAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAA</NewButtons_BinVal1><NewButtons_BinVal2 type="string">AAPPPPPPPPAAAAAAAANLHBAAAAAABCDAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAOLHBAAAAAANAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAPLHBAAAAAAMAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAA</NewButtons_BinVal2><NewButtons_BinVal3 type="string">PPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAANHBAAAAAADAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAABNHBAAAAAAGAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAA</NewButtons_BinVal3><NewButtons_BinVal4 type="string">AAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAACNHBAAAACAKKAAAAAAAAAADHHMLHLPEKIIOMOEJLGLBHJIBGLAHAFDBAAAAAAADAAAAAAAFAAAAAAADEPGCHFGAAENHBAAAAAADAAAAAAAKBDLFIMBFCNFHJBEGJFDMJNFCMOIPKHNAAAAAAAAPPPPPPPPAAAAAAAA</NewButtons_BinVal4></ToolBarInfoEx></Bar-10><Bar-11 type="key"><BarID type="string">59402</BarID><XPos type="string">503</XPos><YPos type="string">56</YPos><MRUWidth type="string">142</MRUWidth><Docking type="string">True</Docking><MRUDockID type="string">59419</MRUDockID><MRUDockLeftPos type="string">503</MRUDockLeftPos><MRUDockTopPos type="string">56</MRUDockTopPos><MRUDockRightPos type="string">645</MRUDockRightPos><MRUDockBottomPos type="string">86</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">400000</PctWidth><MRUFloatCX type="string">142</MRUFloatCX><MRUFloatCY type="string">30</MRUFloatCY><MRUHorzDockCX type="string">142</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">31</MRUVertDockCX><MRUVertDockCY type="string">46</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Tools</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Tools</Title><NewButtons type="string">DNHBAAAACAEGAAAAAAAAAAGEAOMHHDMDCIFAKEIIICDBCMNFEDNFHHBAAAAAAAGAAAAAAAFAAAAAAADEPGCHFGAAHNHBAAAAAABOAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAA</NewButtons></ToolBarInfoEx></Bar-11><Bar-12 type="key"><BarID type="string">9110</BarID><XPos type="string">1</XPos><YPos type="string">5</YPos><Docking type="string">True</Docking><MRUDockID type="string">59422</MRUDockID><MRUDockLeftPos type="string">1</MRUDockLeftPos><MRUDockTopPos type="string">5</MRUDockTopPos><MRUDockRightPos type="string">1252</MRUDockRightPos><MRUDockBottomPos type="string">155</MRUDockBottomPos><MRUFloatStyle type="string">4</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">36756</Style><ExStyle type="string">3889</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">1000000</PctWidth><MRUFloatCX type="string">300</MRUFloatCX><MRUFloatCY type="string">180</MRUFloatCY><MRUHorzDockCX type="string">1251</MRUHorzDockCX><MRUHorzDockCY type="string">150</MRUHorzDockCY><MRUVertDockCX type="string">300</MRUVertDockCX><MRUVertDockCY type="string">180</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14948</TypeID><ClassName type="string">CTabWndControlBar</ClassName><WindowName type="string">Tab Window Bar 0</WindowName><ResourceID type="string">0</ResourceID><ViewServerInstCnt type="string">-1</ViewServerInstCnt><ViewServerMultiInst type="string">False</ViewServerMultiInst><ViewServerType type="string">UDEDesktop Standard Bars</ViewServerType><ViewServerInstName type="string">Tab Window Bar 0</ViewServerInstName><ViewServerDbgSrvCfg type="string">UDEDesktop</ViewServerDbgSrvCfg><ExDockRow type="string">0</ExDockRow><ExDockCol type="string">0</ExDockCol><ExDockHeight type="string">150</ExDockHeight><NoOfDockBars type="string">1</NoOfDockBars></Bar-12><Bar-13 type="key"><BarID type="string">9100</BarID><Visible type="string">False</Visible><XPos type="string">0</XPos><YPos type="string">0</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">0</MRUDockLeftPos><MRUDockTopPos type="string">0</MRUDockTopPos><MRUDockRightPos type="string">0</MRUDockRightPos><MRUDockBottomPos type="string">0</MRUDockBottomPos><MRUFloatStyle type="string">4</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">8084</Style><ExStyle type="string">3889</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">1000000</PctWidth><MRUFloatCX type="string">300</MRUFloatCX><MRUFloatCY type="string">180</MRUFloatCY><MRUHorzDockCX type="string">300</MRUHorzDockCX><MRUHorzDockCY type="string">180</MRUHorzDockCY><MRUVertDockCX type="string">150</MRUVertDockCX><MRUVertDockCY type="string">180</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14948</TypeID><ClassName type="string">CUdeProjectWspBar</ClassName><WindowName type="string">Project Workspace Bar</WindowName><ResourceID type="string">0</ResourceID><ViewServerInstCnt type="string">-1</ViewServerInstCnt><ViewServerMultiInst type="string">False</ViewServerMultiInst><ViewServerType type="string">UDEDesktop Standard Bars</ViewServerType><ViewServerInstName type="string">Project Workspace Bar</ViewServerInstName><ViewServerDbgSrvCfg type="string">UDEDesktop</ViewServerDbgSrvCfg><ExDockRow type="string">0</ExDockRow><ExDockCol type="string">0</ExDockCol><ExDockHeight type="string">0</ExDockHeight><NoOfDockBars type="string">1</NoOfDockBars></Bar-13></DockState><ToolBarMgr type="key"><ToolTips type="string">True</ToolTips><CoolLook type="string">True</CoolLook><LargeButtons type="string">False</LargeButtons></ToolBarMgr></DesktopState></PersistTreeRoot><StdTargetManagerWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">29.11.2012 14:44:16:141</FrameCreated><ViewSrv type="key"><TargetBrowserView type="key"><SplitterRatio type="int">51</SplitterRatio></TargetBrowserView></ViewSrv><NETFrameMode type="int">77824</NETFrameMode><NETFrameSaveIndex type="int">1</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">1</CommonVisibilityGroup><VisibilityGroup_1 type="string">WorkspaceManager</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdTargetManagerWin><StdUDEMessageWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">29.10.2012 12:22:48:420</FrameCreated><ViewSrv type="key"><LogWin type="key"><Index type="key"><Width type="bin" size="8">MgAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Index><Type type="key"><Width type="bin" size="8">ZAAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Type><Time type="key"><Width type="bin" size="8">ZAAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Time><Src type="key"><Width type="bin" size="8">lgAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Src><Msg type="key"><Width type="bin" size="8">6AMAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Msg></LogWin><CmdWin type="key"><History type="key"/></CmdWin></ViewSrv><FrameDockState type="flag">1</FrameDockState><FrameMode type="int">3</FrameMode><NETFrameMode type="int">90112</NETFrameMode><NETFrameSaveIndex type="int">0</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">1</CommonVisibilityGroup><VisibilityGroup_1 type="string">WorkspaceManager</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdUDEMessageWin><StdUDECmdWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDECmdWin><UDETraceWin2 type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDETraceWin2><StdUDEWspHTMLView type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEWspHTMLView><Tab_Window_Bar_0 type="key" name="Tab Window Bar 0"><ProjectOpenFlag type="flag">1</ProjectOpenFlag><FrameDockState type="flag">1</FrameDockState><ProjectLastActivePage type="int">0</ProjectLastActivePage></Tab_Window_Bar_0><Project_Workspace_Bar type="key" name="Project Workspace Bar"><ProjectOpenFlag type="flag">0</ProjectOpenFlag><FrameDockState type="flag">1</FrameDockState><ProjectLastActivePage type="int">0</ProjectLastActivePage></Project_Workspace_Bar><TraceFramework type="key"/><SelectedPrinter type="string">\\napnt002.nap.st.com\NAPPRT0001</SelectedPrinter><VisibilityGroupsMgr type="key"><Core type="key"><UsePrimaryGroup type="flag">0</UsePrimaryGroup><UseLastUsedGroup type="flag">0</UseLastUsedGroup></Core><VisibilityGroup_1 type="key"><NoOfDebugger type="int">0</NoOfDebugger><DefaultGroupName type="string">WorkspaceManager</DefaultGroupName><GroupName type="string">WorkspaceManager</GroupName><PrimaryGroup type="flag">0</PrimaryGroup><CommonGroup type="flag">1</CommonGroup></VisibilityGroup_1><VisibilityGroup_2 type="key"><Debugger_1 type="string">Core</Debugger_1><NoOfDebugger type="int">1</NoOfDebugger><DefaultGroupName type="string">Target0.Controller0.Core</DefaultGroupName><GroupName type="string">Target0.Controller0.Core</GroupName><PrimaryGroup type="flag">1</PrimaryGroup><CommonGroup type="flag">0</CommonGroup></VisibilityGroup_2><NoOfDefaultVisibilityGroups type="int">2</NoOfDefaultVisibilityGroups><NoOfVisibilityGroups type="int">2</NoOfVisibilityGroups><EnableUserSwitchOfVisibilityGroups type="flag">0</EnableUserSwitchOfVisibilityGroups><EnableDebuggerSwitchOfVisibilityGroups type="flag">0</EnableDebuggerSwitchOfVisibilityGroups><VisibilityGroupsCtrlTBCat type="int">7</VisibilityGroupsCtrlTBCat><EnableVisibilityGroups type="flag">0</EnableVisibilityGroups></VisibilityGroupsMgr><NETPlacementRoot type="key"><FormsData type="innerxml"><FormsData><Bounds><X>91</X><Y>49</Y><Width>1284</Width><Height>823</Height></Bounds><ClientSize><Width>1268</Width><Height>785</Height></ClientSize><State>Normal</State></FormsData></FormsData><DockingManagerControlData type="innerxml"><DockingManagerControlData><MDIActive>false</MDIActive><DocumentDockStyle>Top</DocumentDockStyle><DockingControls><DockingControlData><DockedDimension>1260</DockedDimension><Cancelled>false</Cancelled><DockingType>Bottom</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>true</Selected></DockingControlData><DockingControlData><DockedDimension>462</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>true</Selected></DockingControlData><DockingControlData><DockedDimension>462</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>1</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>0</DockedDimension><Cancelled>false</Cancelled><DockingType>Top</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>-1</PanelIndex><ContainerType>TabbedDocument</ContainerType><Selected>true</Selected></DockingControlData><DockingControlData><DockedDimension>462</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>2</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>462</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>3</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData></DockingControls><LeftDockingContainerControlData><DockingContainerControlData><Tabbed>true</Tabbed><Dimension>606</Dimension></DockingContainerControlData></LeftDockingContainerControlData><RightDockingContainerControlData><DockingContainerControlData><Tabbed>false</Tabbed><Dimension>200</Dimension></DockingContainerControlData></RightDockingContainerControlData><TopDockingContainerControlData><DockingContainerControlData><Tabbed>false</Tabbed><Dimension>200</Dimension></DockingContainerControlData></TopDockingContainerControlData><BottomDockingContainerControlData><DockingContainerControlData><Tabbed>true</Tabbed><Dimension>200</Dimension></DockingContainerControlData></BottomDockingContainerControlData><TabbedDocumentContainerControlData><TabbedDocumentContainerControlData><Selected>true</Selected><SplitterSize>100</SplitterSize></TabbedDocumentContainerControlData></TabbedDocumentContainerControlData></DockingManagerControlData></DockingManagerControlData><ToolbarControlData type="innerxml"><ToolbarControlData><ShowPanelShortcuts>true</ShowPanelShortcuts><ShowToolItemMessages>true</ShowToolItemMessages><TopContainer><PanelBounds><X>0</X><Y>0</Y><Width>1268</Width><Height>74</Height></PanelBounds><ToolBars><ToolbarPersistData><Bounds><X>0</X><Y>0</Y><Width>1268</Width><Height>24</Height></Bounds><Name>Platform Main Menu</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>3</X><Y>24</Y><Width>440</Width><Height>25</Height></Bounds><Name>Views Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x4_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Target Browser</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x15_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Diagnostic Message Viewer</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xF_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Console</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x0_{DED51A60-E0B7-11D4-9112-0001034962B6}</Name><Visible>true</Visible><Text>CPU Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1E_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Explore Symbols</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5C_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Single Program Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5A_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Disassembly Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x2D_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show Special Function Register</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3C_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Locals</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x46_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Watch</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Simulated I/O</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x14_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>UDE HTML</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x19_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Array Chart</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1B_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Time Traced Signal Chart</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x50_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>IP Trace Profiling</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x28_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Memory</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x46_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Call Stack</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>443</X><Y>24</Y><Width>95</Width><Height>25</Height></Bounds><Name>Edit Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Workspace_0x1779</Name><Visible>true</Visible><Text>Cut</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177A</Name><Visible>true</Visible><Text>Copy</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177B</Name><Visible>true</Visible><Text>Paste</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>538</X><Y>24</Y><Width>276</Width><Height>25</Height></Bounds><Name>Macro Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x3B_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Run Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x40_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Debug Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Break Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3C_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Reload Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Ctrl_{4D5190CD-077D-4F92-B890-4545242BF32A}_UDEWorkspace</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>814</X><Y>24</Y><Width>210</Width><Height>25</Height></Bounds><Name>File Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Workspace_0x1770</Name><Visible>true</Visible><Text>New Workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1771</Name><Visible>true</Visible><Text>Open workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1772</Name><Visible>true</Visible><Text>Save workspace as</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1773</Name><Visible>true</Visible><Text>Save workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1774</Name><Visible>true</Visible><Text>Close workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177F</Name><Visible>true</Visible><Text>Export view content</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1778</Name><Visible>true</Visible><Text>Print</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Load Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>3</X><Y>49</Y><Width>509</Width><Height>25</Height></Bounds><Name>Debug Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x18_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show IP</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5E_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show program code</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x7_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Start Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x9_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Over</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Into</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xB_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Out</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x8_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Run Cursor</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x321_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Break Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xD_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Reset</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xC_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Restart Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Breakpoints</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x6_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Toggle Break</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Ctrl_{FB7BC773-88A4-4ECE-B9B6-7189610B0735}_Core</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{1C85B31A-5D25-4197-9635-9C5DC28EAFD7}</Name><Visible>true</Visible><Text>Trigger setup</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>512</X><Y>49</Y><Width>141</Width><Height>25</Height></Bounds><Name>Config Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x3_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Target Configuration</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xFE_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Connect Target</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x100_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Disconnect Target</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x6_{1C85B31A-5D25-4197-9635-9C5DC28EAFD7}</Name><Visible>true</Visible><Text>Setup Target Interface</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x12_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>MCU Run Control</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>653</X><Y>49</Y><Width>151</Width><Height>25</Height></Bounds><Name>Tools Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Ctrl_{377CE046-823C-4A05-8828-13C25D345D77}_Core</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xE1_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Execution Time Setup</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>100</Y><Width>26</Width><Height>25</Height></Bounds><Name>Show Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>200</Y><Width>26</Width><Height>25</Height></Bounds><Name>Window Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>225</Y><Width>26</Width><Height>25</Height></Bounds><Name>Workspace Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>275</Y><Width>26</Width><Height>25</Height></Bounds><Name>Help Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData></ToolBars></TopContainer><BottomContainer><PanelBounds><X>0</X><Y>762</Y><Width>1268</Width><Height>23</Height></PanelBounds><ToolBars><ToolbarPersistData><Bounds><X>0</X><Y>0</Y><Width>1268</Width><Height>23</Height></Bounds><Name>Platform Status Bar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData/></ToolbarPersistData></ToolBars></BottomContainer><LeftContainer><PanelBounds><X>0</X><Y>74</Y><Width>0</Width><Height>688</Height></PanelBounds><ToolBars/></LeftContainer><RightContainer><PanelBounds><X>1268</X><Y>74</Y><Width>0</Width><Height>688</Height></PanelBounds><ToolBars/></RightContainer></ToolbarControlData></ToolbarControlData></NETPlacementRoot></MainFrame><INI_SECTION type="key"><Macro type="key"><MacroLib type="string">..\..\..\..\Program Files\pls\UDE 4.0\StdLibrary.mso</MacroLib></Macro><Loader type="key"><LOADER_REGKEY_WSP type="string">{866f82d3-fac5-43cd-8a82-0af01e46e2c5}</LOADER_REGKEY_WSP></Loader></INI_SECTION><AddOns type="key"><UDE.Script type="key"><MacroGuiEntries type="key"><LastScriptFilePath type="string">..\..\..\..\Documents and Settings\disiriog\My Documents\pls\UDE 4.0</LastScriptFilePath><Macro_24_10_13_10_57_01_0 type="key"><ScriptDescription type="string">The script contains a collection of macros to save memory content into different file formats 
+and fill target memory ranges</ScriptDescription><ScriptPath type="string">V:\UDE\AddOns\Macro\MacroLibrary\StdMacros1.dsm</ScriptPath><ScriptSource type="string">'	
+'	$Header: /Ude/AddOns/Macro/MacroLibrary/StdMacros.dsm 3     30.04.04 9:34 Weisses $
+'_______________________________________________________
+'
+'	universal debug engine
+'	 
+'	Standard command line macros - part 1 
+'
+'	pls Development Tools 1999-2004
+'
+'   28.04.04    SW     correction for UDE 1.10
+'   03.06.03    SW     initial version
+'_______________________________________________________
+
+'_______________________________________________________
+'
+'	UnAss command line function
+' 
+'	generates disassembly file 
+'
+'	command line UnAss output-file range1 [range2] [range3] .....
+'	range description:
+'		C:&lt;startaddress&gt;,&lt;length&gt; or	- code
+'		DB:&lt;startaddress&gt;,&lt;length&gt; or	- data byte
+'		DW:&lt;startaddress&gt;,&lt;length&gt; or	- data word
+'		DD:&lt;startaddress&gt;,&lt;length&gt; or	- data dword
+'_______________________________________________________
+
+Sub UnAss(File,ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	If IsNumeric(File) Then
+	  	MsgBox "File parameter wrong - " &amp; File
+		Exit Sub 		
+	End If
+	DisASMObj.OutputPath = CStr(File)
+	bRetVal = DisASMObj.CreateStream(True,"UDE Disassembler output of current Program",False)
+	If bRetVal = True Then
+		ParmeterCnt = ParameterObj.ParameterCount
+		If ParmeterCnt = 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		RangeCnt = ParmeterCnt/3
+		ParamIndex = 0
+		For Range = 0 To RangeCnt -1 
+			KindOfRange = CStr(ParameterObj.Parameter(ParamIndex)) 
+			KindOfRange = UCase(KindOfRange)
+			Address = CLng(ParameterObj.Parameter(ParamIndex +1))		
+			Length = CLng(ParameterObj.Parameter(ParamIndex +2))
+			ParamIndex = ParamIndex +3
+			If IsNumeric(KindOfRange) Then
+				If KindOfRange = 12 Then
+ 					DisASMObj.AddRange Address,Length,1
+				ElseIf KindOfRange = 219 Then
+ 					DisASMObj.AddRange Address,Length,2
+				ElseIf KindOfRange = 221 Then
+ 					DisASMObj.AddRange Address,Length,4
+				Else
+	  				MsgBox "Invalid range type " &amp; KindOfRange &amp;  "of range " &amp; Range +1
+					Exit Sub 		
+			 	End If
+			Else
+				If KindOfRange = "C" Then
+ 					DisASMObj.AddRange Address,Length,1
+				ElseIf KindOfRange = "DB" Then
+ 					DisASMObj.AddRange Address,Length,2
+				ElseIf KindOfRange = "DW" Then
+ 					DisASMObj.AddRange Address,Length,3
+				ElseIf KindOfRange = "DD" Then
+ 					DisASMObj.AddRange Address,Length,4
+				Else
+	  				MsgBox "Invalid range type " &amp; KindOfRange &amp;  "of range " &amp; Range +1
+					Exit Sub 		
+				End If
+			End If
+		Next
+		DisASMObj.HexFileModeFlag = False
+		DisASMObj.ListModeFlag = False
+		DisASMObj.WriteAllRanges(False)
+	End If
+
+End Sub
+
+'_______________________________________________________
+'
+'	SaveHEX command line function
+' 
+'	generates intel-HEX file 
+'
+'	command line SaveHex output-file range1 [range2] [range3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub SaveHEX(File,ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	If IsNumeric(File) Then
+	  	MsgBox "File parameter wrong - " &amp; File
+		Exit Sub 		
+	End If
+	DisASMObj.OutputPath = CStr(File)
+	bRetVal = DisASMObj.CreateStream(True,"UDE generated intel-Hex file of current Program",False)
+	If bRetVal = True Then
+		ParmeterCnt = ParameterObj.ParameterCount
+		If ParmeterCnt = 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		If ( ParmeterCnt Mod 2 ) &lt;&gt; 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		RangeCnt = ParmeterCnt/2
+		ParamIndex = 0
+		For Range = 0 To RangeCnt -1 
+			Address = CLng(ParameterObj.Parameter(ParamIndex))		
+			Length = CLng(ParameterObj.Parameter(ParamIndex +1))
+			ParamIndex = ParamIndex +2
+ 			DisASMObj.AddRange Address,Length,0
+		Next
+		DisASMObj.HexFileModeFlag = True
+		DisASMObj.WriteAllRanges(False)
+	End If
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillByte command line function
+' 
+'	fills memory range with byte pattern 
+'
+'	command line FillByte range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillByte(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.ByteArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1))
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillWord command line function
+' 
+'	fills memory range with word pattern 
+'
+'	command line FillWord range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillWord(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.WordArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1)/2)
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillDWord command line function
+' 
+'	fills memory range with dword pattern 
+'
+'	command line FillDWord range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillDWord(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.DWordArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1)/4)
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub</ScriptSource><ScriptArchitecture type="int">63</ScriptArchitecture><ScriptEngine type="string">VBScript</ScriptEngine><MacroFileTime type="string">24.11.2006 14:43:20:000</MacroFileTime><ScriptFromStg type="flag">1</ScriptFromStg><LocalComputerName type="string">WS_CORE_DUO</LocalComputerName><ExternalScriptPath type="string"></ExternalScriptPath><NextNodeName type="string">Macro_26_02_14_15_10_40_0</NextNodeName><UnAss type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute UnAss ..</MenuString><ToolTipString type="string">Macro UnAss</ToolTipString><MessageString type="string">Execute macro UnAss</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">2</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></UnAss><SaveHEX type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute SaveHEX ..</MenuString><ToolTipString type="string">Macro SaveHEX</ToolTipString><MessageString type="string">Execute macro SaveHEX</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">2</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></SaveHEX><FillByte type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillByte ..</MenuString><ToolTipString type="string">Macro FillByte</ToolTipString><MessageString type="string">Execute macro FillByte</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillByte><FillWord type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillWord ..</MenuString><ToolTipString type="string">Macro FillWord</ToolTipString><MessageString type="string">Execute macro FillWord</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillWord><FillDWord type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillDWord ..</MenuString><ToolTipString type="string">Macro FillDWord</ToolTipString><MessageString type="string">Execute macro FillDWord</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillDWord><NoOfFunctions type="int">5</NoOfFunctions></Macro_24_10_13_10_57_01_0></MacroGuiEntries><LastSelectedMacro type="string"></LastSelectedMacro></UDE.Script></AddOns><MultiCoreRunControl type="key"><NoOfRunCtrlGroups type="int">0</NoOfRunCtrlGroups></MultiCoreRunControl><Core type="key"><ViewSrv type="key"><PowerPcCpuWin type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW type="key"><FrameCreated type="string">29.11.2012 14:41:40:753</FrameCreated><ViewSrv type="key"/><NETFrameMode type="int">77827</NETFrameMode><NETFrameSaveIndex type="int">5</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW type="int">0</SAVED_VIEW></PowerPcCpuWin><StdUDESymbolExplWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">14.11.2012 11:38:16:728</FrameCreated><ViewSrv type="key"/><NETFrameMode type="int">77826</NETFrameMode><NETFrameSaveIndex type="int">4</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdUDESymbolExplWin><StdUDEProgWin type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW00 type="key"><FrameCreated type="string">05.11.2012 10:25:05:825</FrameCreated><ViewSrv type="key"/><SourceFile type="string">..\main.c</SourceFile><Placement type="string">1,104,42,457,1136</Placement><FrameMode type="int">0</FrameMode><FrameDockState type="flag">0</FrameDockState><FrameDockFloatState type="flag">1</FrameDockFloatState><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">3</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt><SourceFileInstFlag type="int">1</SourceFileInstFlag></OPEN_VIEW00><SAVED_VIEW00 type="int">0</SAVED_VIEW00><OPEN_VIEW01 type="key"><FrameCreated type="string">24.10.2013 10:57:59:228</FrameCreated><ViewSrv type="key"/><Placement type="string">1,-4,-1,319,1093</Placement><FrameMode type="int">0</FrameMode><FrameDockState type="flag">0</FrameDockState><FrameDockFloatState type="flag">1</FrameDockFloatState><SourceFile type="string">..\..\ChibiOS-RT_Portable_Kernel_Component\component\lib\src\chsys.c</SourceFile><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">4</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW01><OPEN_VIEW02 type="key"><FrameCreated type="string">05.11.2012 10:35:28:109</FrameCreated><ViewSrv type="key"/><Placement type="string">1,0,0,323,1094</Placement><FrameMode type="int">0</FrameMode><FrameDockState type="flag">0</FrameDockState><FrameDockFloatState type="flag">1</FrameDockFloatState><SourceFile type="string">..\..\..\eclipse\plugins\org.chibios.spc5.components.kernel_2.5.1.1\component\lib\src\chthreads.c</SourceFile></OPEN_VIEW02><OPEN_VIEW03 type="key"><FrameCreated type="string">05.11.2012 10:35:58:632</FrameCreated><ViewSrv type="key"/><Placement type="string">1,0,0,323,1094</Placement><FrameMode type="int">0</FrameMode><FrameDockState type="flag">0</FrameDockState><FrameDockFloatState type="flag">1</FrameDockFloatState><SourceFile type="string">..\..\..\eclipse\plugins\org.chibios.spc5.components.kernel_2.5.1.1\component\lib\src\chsys.c</SourceFile></OPEN_VIEW03><SAVED_VIEW01 type="int">1</SAVED_VIEW01><OPEN_VIEW04 type="key"><FrameCreated type="string">05.11.2012 10:36:48:552</FrameCreated><ViewSrv type="key"/><SourceFile type="string">..\..\..\eclipse\plugins\org.chibios.spc5.components.kernel_2.5.1.1\component\lib\src\chschd.c</SourceFile><Placement type="string">1,0,0,323,1094</Placement><FrameMode type="int">0</FrameMode><FrameDockState type="flag">0</FrameDockState><FrameDockFloatState type="flag">1</FrameDockFloatState></OPEN_VIEW04><OPEN_VIEW05 type="key"><FrameCreated type="string">05.11.2012 10:37:13:303</FrameCreated><ViewSrv type="key"/><SourceFile type="string">..\..\..\eclipse\plugins\org.chibios.spc5.components.kernel.port.gcc.spc560pxx_2.5.1.1\component\lib\src\chcore.c</SourceFile><Placement type="string">1,0,0,323,1094</Placement><FrameMode type="int">0</FrameMode><FrameDockState type="flag">0</FrameDockState><FrameDockFloatState type="flag">1</FrameDockFloatState></OPEN_VIEW05><OPEN_VIEW06 type="key"><FrameCreated type="string">05.11.2012 10:38:46:323</FrameCreated><ViewSrv type="key"/><SourceFile type="string">..\..\..\eclipse\plugins\org.chibios.spc5.components.hal_2.5.1.1\component\lib\src\pal.c</SourceFile><Placement type="string">1,0,0,323,1094</Placement><FrameMode type="int">0</FrameMode><FrameDockState type="flag">0</FrameDockState><FrameDockFloatState type="flag">1</FrameDockFloatState></OPEN_VIEW06><SAVED_VIEW02 type="int">2</SAVED_VIEW02><SAVED_VIEW03 type="int">3</SAVED_VIEW03><SAVED_VIEW04 type="int">4</SAVED_VIEW04><SAVED_VIEW05 type="int">5</SAVED_VIEW05><SAVED_VIEW06 type="int">6</SAVED_VIEW06></StdUDEProgWin><StdUDESFRView type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW00 type="key"><FrameCreated type="string">29.11.2012 14:42:34:347</FrameCreated><ViewSrv type="key"><SFRView type="key"><NumberOfBitFieldsPerRow type="bin" size="8">AwAAAA==</NumberOfBitFieldsPerRow><BitfieldValueMode type="bin" size="8">AQAAAA==</BitfieldValueMode><NameWidth type="bin" size="8">kAAAAA==</NameWidth><ValueWidth type="bin" size="8">YAAAAA==</ValueWidth><Bitfield1Width type="bin" size="8">TgAAAA==</Bitfield1Width><Value1Width type="bin" size="8">mgAAAA==</Value1Width><Bitfield2Width type="bin" size="8">TgAAAA==</Bitfield2Width><Value2Width type="bin" size="8">mgAAAA==</Value2Width><Bitfield3Width type="bin" size="8">TgAAAA==</Bitfield3Width><Value3Width type="bin" size="8">mgAAAA==</Value3Width><Bitfield4Width type="bin" size="8">AAAAAA==</Bitfield4Width><Value4Width type="bin" size="8">AAAAAA==</Value4Width><TopIndex type="bin" size="8">AAAAAA==</TopIndex><CaretIndex type="bin" size="8">AAAAAA==</CaretIndex></SFRView></ViewSrv><NETFrameMode type="int">77825</NETFrameMode><NETFrameSaveIndex type="int">2</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW00><SAVED_VIEW00 type="int">0</SAVED_VIEW00><OPEN_VIEW01 type="key"/></StdUDESFRView><StdUDELocalsWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDELocalsWin><StdUDEWatchWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEWatchWin><StdUDESimIOWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDESimIOWin><StdUDEHtmlDocWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEHtmlDocWin><StdUDEGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEGraphWin><StdUDETimeSampleGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDETimeSampleGraphWin><UDEProfilingWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDEProfilingWin><StdUDEMemWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEMemWin><StdUDEIPTraceGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEIPTraceGraphWin><UDETraceCoverageWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDETraceCoverageWin><UDETraceProfilingWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDETraceProfilingWin><UDEStackWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDEStackWin></ViewSrv><UDE.StdDbgSrv type="key"><INI_SECTION type="key"/><UDE.PowerPcArchSrv type="key"><UDE.PpcJtagTargIntf type="key"><NewWorkspace type="flag">0</NewWorkspace><IAC12M type="int">0</IAC12M><IAC34M type="int">0</IAC34M><DAC12M type="int">0</DAC12M><IAC1ER type="int">0</IAC1ER><IAC2ER type="int">0</IAC2ER><IAC3ER type="int">0</IAC3ER><IAC4ER type="int">0</IAC4ER><DAC1ER type="int">0</DAC1ER><DAC2ER type="int">0</DAC2ER><IAC1 type="string">0x00000000</IAC1><IAC2 type="string">0x00000000</IAC2><IAC3 type="string">0x00000000</IAC3><IAC4 type="string">0x00000000</IAC4><DAC1 type="string">0x00000000</DAC1><DAC2 type="string">0x00000000</DAC2><IAC1User type="flag">0</IAC1User><IAC1Supervisor type="flag">0</IAC1Supervisor><IAC2User type="flag">0</IAC2User><IAC2Supervisor type="flag">0</IAC2Supervisor><IAC3User type="flag">0</IAC3User><IAC3Supervisor type="flag">0</IAC3Supervisor><IAC4User type="flag">0</IAC4User><IAC4Supervisor type="flag">0</IAC4Supervisor><DAC1User type="flag">0</DAC1User><DAC1Supervisor type="flag">0</DAC1Supervisor><DAC2User type="flag">0</DAC2User><DAC2Supervisor type="flag">0</DAC2Supervisor><DAC1Rd type="flag">0</DAC1Rd><DAC1Wr type="flag">0</DAC1Wr><DAC2Rd type="flag">0</DAC2Rd><DAC2Wr type="flag">0</DAC2Wr><DAC1Valuel type="int">0x0000</DAC1Valuel><DAC1Valueh type="int">0x0000</DAC1Valueh><DAC2Valuel type="int">0x0000</DAC2Valuel><DAC2Valueh type="int">0x0000</DAC2Valueh><DAC1ValueEn type="flag">0</DAC1ValueEn><DAC2ValueEn type="flag">0</DAC2ValueEn><DVC1M type="int">0</DVC1M><DVC2M type="int">0</DVC2M><DVC1l type="int">0x0000</DVC1l><DVC1h type="int">0x0000</DVC1h><DVC2l type="int">0x0000</DVC2l><DVC2h type="int">0x0000</DVC2h><DVC1BE type="int">0x0000</DVC1BE><DVC2BE type="int">0x0000</DVC2BE><ICMPEvent type="flag">0</ICMPEvent><BRTEvent type="flag">0</BRTEvent><IRPTEvent type="flag">0</IRPTEvent><TRAPEvent type="flag">0</TRAPEvent><RETEvent type="flag">0</RETEvent><DEVT1Event type="flag">0</DEVT1Event><DEVT2Event type="flag">0</DEVT2Event><DCNT1Event type="flag">0</DCNT1Event><DCNT2Event type="flag">0</DCNT2Event><CIRPTEvent type="flag">0</CIRPTEvent><CRETEvent type="flag">0</CRETEvent><DAC1LNK type="flag">0</DAC1LNK><DAC2LNK type="flag">0</DAC2LNK><DEVT1C1 type="flag">0</DEVT1C1><DEVT2C1 type="flag">0</DEVT2C1><ICMPC1 type="flag">0</ICMPC1><IAC1C1 type="flag">0</IAC1C1><IAC2C1 type="flag">0</IAC2C1><IAC3C1 type="flag">0</IAC3C1><IAC4C1 type="flag">0</IAC4C1><DAC1RC1 type="flag">0</DAC1RC1><DAC1WC1 type="flag">0</DAC1WC1><IRPTC1 type="flag">0</IRPTC1><RETC1 type="flag">0</RETC1><DEVT1C2 type="flag">0</DEVT1C2><DEVT2C2 type="flag">0</DEVT2C2><ICMPC2 type="flag">0</ICMPC2><IAC1C2 type="flag">0</IAC1C2><IAC2C2 type="flag">0</IAC2C2><IAC3C2 type="flag">0</IAC3C2><IAC4C2 type="flag">0</IAC4C2><DAC1RC2 type="flag">0</DAC1RC2><DAC1WC2 type="flag">0</DAC1WC2><DEVT1T1 type="flag">0</DEVT1T1><DEVT2T1 type="flag">0</DEVT2T1><IAC1T1 type="flag">0</IAC1T1><IAC3T1 type="flag">0</IAC3T1><DAC1RT1 type="flag">0</DAC1RT1><DAC1WT1 type="flag">0</DAC1WT1><CNT2T1 type="flag">0</CNT2T1><CONFIG type="flag">0</CONFIG></UDE.PpcJtagTargIntf></UDE.PowerPcArchSrv><UDE.UDESymbol type="key"><DefaultBinFileDir type="string">..\build</DefaultBinFileDir><BinFileDialogParam type="key"><Filter type="int">1</Filter></BinFileDialogParam><BinaryFiles type="key"><Number type="int">1</Number><BinaryFile1 type="key"><FullPath type="string">..\build\ch.elf</FullPath><Breakpoints type="key"><Breakpoint1 type="string">Software;enabled;0;disabled;'main {C:\ChibiStudio\workspace\SPC5\demos\SPC560Pxx OS-Less Test Application\main.c} .25';main.c;1;0;;$disabled; ;disabled; ;</Breakpoint1><Number type="int">1</Number></Breakpoints></BinaryFile1><BinaryFile-1 type="key"/></BinaryFiles><PosHistory0 type="string">0</PosHistory0><PosHistory1 type="string"></PosHistory1><PosHistory2 type="string"></PosHistory2><PosHistory3 type="string"></PosHistory3><PosHistory4 type="string"></PosHistory4><PosHistory5 type="string"></PosHistory5><PosHistory6 type="string"></PosHistory6><PosHistory7 type="string"></PosHistory7><PosHistory8 type="string"></PosHistory8><PosHistory9 type="string"></PosHistory9><MultiCoreLoader type="key"><Number type="int">0</Number></MultiCoreLoader><ExpressionClipboard type="key"><Number type="int">0</Number></ExpressionClipboard></UDE.UDESymbol><STG_ADDON_PROF type="key"><UDE_Graphwin_Trace_AddOn type="key" name="UDE Graphwin Trace AddOn"><LOAD_STATE type="flag">0</LOAD_STATE></UDE_Graphwin_Trace_AddOn><UDELicense_Server type="key" name="UDELicense Server"><LOAD_STATE type="flag">1</LOAD_STATE></UDELicense_Server><UDEMemtool type="key"><LOAD_STATE type="flag">1</LOAD_STATE><FlashMod_PFLASH type="key"><Enabled type="flag">1</Enabled></FlashMod_PFLASH><FlashMod_DFLASH type="key"/><FlashMod_SHADOWFLASH type="key"/><Frontend type="key"><LastModule type="int">0</LastModule><VerifyProt type="flag">0</VerifyProt><VerifyProtFile type="string">verify.txt</VerifyProtFile><VerifyOnExit type="flag">0</VerifyOnExit><StoreLoadedSections type="flag">0</StoreLoadedSections><AutoStartProgAfterDownload type="flag">0</AutoStartProgAfterDownload><AutoCloseExecCmdDialog type="flag">0</AutoCloseExecCmdDialog><AllowOverwrite type="flag">0</AllowOverwrite></Frontend></UDEMemtool><ADD_ON_DEL_FLAG type="flag">0</ADD_ON_DEL_FLAG></STG_ADDON_PROF><CommQueueHndlStg type="key"><Beep type="flag">0</Beep><Retry type="flag">0</Retry><RetryPeriod type="int">0</RetryPeriod></CommQueueHndlStg><TargetStateHndlStg type="key"/></UDE.StdDbgSrv><MRUSourceFileList type="key"><NoOfMRUSrcFileEntries type="int">1</NoOfMRUSrcFileEntries><MRUSrcFile0 type="string">..\main.c</MRUSrcFile0></MRUSourceFileList></Core><TargetInfoFile type="string">stm_xpc560p_minimodule_40mhz_debug_jtag.cfg</TargetInfoFile><LastWriteDate type="string">26.02.2014 15:10:39:999</LastWriteDate></stg>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/UDE/stm_xpc560p_minimodule_40mhz_debug_jtag.cfg b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/UDE/stm_xpc560p_minimodule_40mhz_debug_jtag.cfg
new file mode 100644
index 0000000..10f1d0e
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/UDE/stm_xpc560p_minimodule_40mhz_debug_jtag.cfg
@@ -0,0 +1,110 @@
+[Main]
+Signature=UDE_TARGINFO_2.0
+Description=STM XPC560P Mini Module with SPC560P50, 40MHz external crystal (Jtag)
+Description1=FLASH programming prepared but not enabled
+Description2=Write Filter for BAM Module
+MCUs=Controller0
+Architecture=PowerPC
+Vendor=STM
+Board=XPC560P Mini Module
+
+[Controller0]
+Family=PowerPC
+Type=SPC560P50
+Enabled=1
+IntClock=64000
+MemDevs=BAMWriteFilter
+ExtClock=40000
+
+[Controller0.Core]
+Protocol=PPCJTAG
+Enabled=1
+
+[Controller0.Core.LoadedAddOn]
+UDEMemtool=1
+
+[Controller0.Core.PpcJtagTargIntf]
+PortType=FTDI
+ResetWaitTime=50
+MaxJtagClk=2500
+DoSramInit=1
+UseNexus=0
+AdaptiveJtagPhaseShift=1
+ConnOption=Break
+ChangeJtagClk=-1
+HaltAfterReset=1
+SimioAddr=g_JtagSimioAccess
+FreezeTimers=1
+InvalidTlbOnReset=0
+InvalidateCache=0
+ForceCacheFlush=0
+IgnoreLockedLines=0
+ExecInitCmds=1
+JtagTapNumber=0
+JtagNumOfTaps=1
+JtagNumIrBefore=0
+JtagNumIrAfter=0
+
+SimioAddr=g_JtagSimioAccess
+
+FlushCache=0
+AllowMmuSetup=0
+UseExtReset=1
+HandleWdtBug=0
+ForceEndOfReset=0
+JtagViaPod=0
+AllowResetOnCheck=1
+CommDevSel=PortType=USB,Type=FTDI
+TargetPort=Default
+ChangeMsr=0
+ChangeMsrValue=0x0
+ExecOnStartCmds=0
+ExecOnHaltCmds=0
+EnableProgramTimeMeasurement=0
+UseHwResetMode=1
+HandleNexusAccessBug=0
+DoNotEnableTrapSwBrp=0
+BootPasswd0=0xFEEDFACE
+BootPasswd1=0xCAFEBEEF
+BootPasswd2=0xFFFFFFFF
+BootPasswd3=0xFFFFFFFF
+BootPasswd4=0xFFFFFFFF
+BootPasswd5=0xFFFFFFFF
+BootPasswd6=0xFFFFFFFF
+BootPasswd7=0xFFFFFFFF
+JtagIoType=Jtag
+ExecOnHaltCmdsWhileHalted=0
+TimerForPTM=Default
+AllowBreakOnUpdateBreakpoints=0
+ClearDebugStatusOnHalt=1
+HwResetMode=Simulate
+UseMasterNexusIfResetState=1
+UseLocalAddressTranslation=1
+Use64BitNexus=0
+InitSramOnlyWhenNotInitialized=0
+DisableE2EECC=0
+AllowHarrForUpdateDebugRegs=0
+UseCore0ForNexusMemoryAccessWhileRunning=0
+
+
+
+[Controller0.BAMWriteFilter]
+Description=BAM WriteAccess Filter
+Range0Start=0xFFFFC000
+Range0Size=0x4000
+Enabled=1
+Handler=AccessFilter
+Mode=ReadOnly
+
+[Controller0.PFLASH]
+Enabled=1
+EnableMemtoolByDefault=1
+
+[Controller0.Core.PpcJtagTargIntf.InitScript]
+// disable watchdog
+SET SWT_SR 0xC520
+SET SWT_SR 0xD928
+SET SWT_CR 0xFF00000A
+[Controller0.Core.PpcJtagTargIntf.OnStartScript]
+
+[Controller0.Core.PpcJtagTargIntf.OnHaltScript]
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/chconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/chconf.h
new file mode 100644
index 0000000..f6244ad
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/halconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/halconf.h
new file mode 100644
index 0000000..6827953
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/halconf.h
@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM                  FALSE
+#endif
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/main.c b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/main.c
new file mode 100644
index 0000000..1806961
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/main.c
@@ -0,0 +1,202 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+#include "shell.h"
+#include "chprintf.h"
+
+#define SHELL_WA_SIZE   THD_WORKING_AREA_SIZE(1024)
+#define TEST_WA_SIZE    THD_WORKING_AREA_SIZE(256)
+
+static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
+  size_t n, size;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: mem\r\n");
+    return;
+  }
+  n = chHeapStatus(NULL, &size);
+  chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX());
+  chprintf(chp, "heap fragments   : %u\r\n", n);
+  chprintf(chp, "heap free total  : %u bytes\r\n", size);
+}
+
+static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
+  static const char *states[] = {CH_STATE_NAMES};
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: threads\r\n");
+    return;
+  }
+  chprintf(chp, "    addr    stack prio refs     state time\r\n");
+  tp = chRegFirstThread();
+  do {
+    chprintf(chp, "%08lx %08lx %4lu %4lu %9s\r\n",
+            (uint32_t)tp, (uint32_t)tp->p_ctx.sp,
+            (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
+            states[tp->p_state]);
+    tp = chRegNextThread(tp);
+  } while (tp != NULL);
+}
+
+static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: test\r\n");
+    return;
+  }
+  tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(),
+                           TestThread, chp);
+  if (tp == NULL) {
+    chprintf(chp, "out of memory\r\n");
+    return;
+  }
+  chThdWait(tp);
+}
+
+static const ShellCommand commands[] = {
+  {"mem", cmd_mem},
+  {"threads", cmd_threads},
+  {"test", cmd_test},
+  {NULL, NULL}
+};
+
+static const ShellConfig shell_cfg1 = {
+  (BaseSequentialStream *)&SD1,
+  commands
+};
+
+/*
+ * LEDs blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+
+  while (true) {
+    unsigned i;
+
+    for (i = 0; i < 4; i++) {
+      palClearPad(PORT_D, PD_LED1);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT_D, PD_LED2);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT_D, PD_LED3);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT_D, PD_LED4);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_D, PD_LED1);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_D, PD_LED2);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_D, PD_LED3);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_D, PD_LED4);
+      chThdSleepMilliseconds(300);
+    }
+
+    for (i = 0; i < 4; i++) {
+      palTogglePort(PORT_D, PAL_PORT_BIT(PD_LED1) | PAL_PORT_BIT(PD_LED2) |
+                            PAL_PORT_BIT(PD_LED3) | PAL_PORT_BIT(PD_LED4));
+      chThdSleepMilliseconds(500);
+      palTogglePort(PORT_D, PAL_PORT_BIT(PD_LED1) | PAL_PORT_BIT(PD_LED2) |
+                            PAL_PORT_BIT(PD_LED3) | PAL_PORT_BIT(PD_LED4));
+      chThdSleepMilliseconds(500);
+    }
+
+    for (i = 0; i < 4; i++) {
+      palTogglePad(PORT_D, PD_LED1);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_D, PD_LED1);
+      palTogglePad(PORT_D, PD_LED2);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_D, PD_LED2);
+      palTogglePad(PORT_D, PD_LED3);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_D, PD_LED3);
+      palTogglePad(PORT_D, PD_LED4);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_D, PD_LED4);
+    }
+
+    for (i = 0; i < 4; i++) {
+      palClearPort(PORT_D, PAL_PORT_BIT(PD_LED1) | PAL_PORT_BIT(PD_LED3));
+      palSetPort(PORT_D, PAL_PORT_BIT(PD_LED2) | PAL_PORT_BIT(PD_LED4));
+      chThdSleepMilliseconds(500);
+      palClearPort(PORT_D, PAL_PORT_BIT(PD_LED2) | PAL_PORT_BIT(PD_LED4));
+      palSetPort(PORT_D, PAL_PORT_BIT(PD_LED1) | PAL_PORT_BIT(PD_LED3));
+      chThdSleepMilliseconds(500);
+    }
+
+    palSetPort(PORT_D, PAL_PORT_BIT(PD_LED1) | PAL_PORT_BIT(PD_LED2) |
+                       PAL_PORT_BIT(PD_LED3) | PAL_PORT_BIT(PD_LED4));
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+  thread_t *shelltp = NULL;
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Shell manager initialization.
+   */
+  shellInit();
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   */
+  sdStart(&SD1, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity.
+   */
+  while (true) {
+    if (!shelltp)
+      shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
+    else if (chThdTerminatedX(shelltp)) {
+      chThdRelease(shelltp);    /* Recovers memory of the previous shell.   */
+      shelltp = NULL;           /* Triggers spawning of a new shell.        */
+    }
+    chThdSleepMilliseconds(1000);
+  }
+  return 0;
+}
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/mcuconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/mcuconf.h
new file mode 100644
index 0000000..6ec56ad
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC560P-EVB/mcuconf.h
@@ -0,0 +1,194 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * SPC560Pxx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 1...15       Lowest...Highest.
+ * DMA priorities:
+ * 0...15       Highest...Lowest.
+ */
+
+#define SPC560Pxx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define SPC5_NO_INIT                        FALSE
+#define SPC5_ALLOW_OVERCLOCK                FALSE
+#define SPC5_DISABLE_WATCHDOG               TRUE
+#define SPC5_FMPLL0_IDF_VALUE               5
+#define SPC5_FMPLL0_NDIV_VALUE              32
+#define SPC5_FMPLL0_ODF                     SPC5_FMPLL_ODF_DIV4
+#define SPC5_FMPLL1_IDF_VALUE               5
+#define SPC5_FMPLL1_NDIV_VALUE              60
+#define SPC5_FMPLL1_ODF                     SPC5_FMPLL_ODF_DIV4
+#define SPC5_AUX0CLK_SRC                    SPC5_CGM_SS_FMPLL0
+#define SPC5_MCONTROL_DIVIDER_VALUE         2
+#define SPC5_FMPLL1_CLK_DIVIDER_VALUE       2
+#define SPC5_AUX2CLK_SRC                    SPC5_CGM_SS_FMPLL0
+#define SPC5_SP_CLK_DIVIDER_VALUE           2
+#define SPC5_AUX3CLK_SRC                    SPC5_CGM_SS_FMPLL0
+#define SPC5_FR_CLK_DIVIDER_VALUE           2
+#define SPC5_CLOCK_FAILURE_HOOK()           osalSysHalt("clock failure")
+
+/*
+ * EDMA driver settings.
+ */
+#define SPC5_EDMA_CR_SETTING                (EDMA_CR_GRP1PRI(1) |           \
+                                             EDMA_CR_GRP0PRI(0) |           \
+                                             EDMA_CR_EMLM       |           \
+                                             EDMA_CR_ERGA)
+#define SPC5_EDMA_GROUP0_PRIORITIES         0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+#define SPC5_EDMA_ERROR_IRQ_PRIO            12
+#define SPC5_EDMA_ERROR_HANDLER()           osalSysHalt("DMA failure")
+
+/*
+ * PWM driver system settings.
+ */
+#define SPC5_PWM_USE_SMOD0                  FALSE
+#define SPC5_PWM_USE_SMOD1                  FALSE
+#define SPC5_PWM_USE_SMOD2                  FALSE
+#define SPC5_PWM_USE_SMOD3                  FALSE
+#define SPC5_PWM_SMOD0_PRIORITY             7
+#define SPC5_PWM_SMOD1_PRIORITY             7
+#define SPC5_PWM_SMOD2_PRIORITY             7
+#define SPC5_PWM_SMOD3_PRIORITY             7
+
+#define SPC5_PWM_USE_SMOD4                  FALSE
+#define SPC5_PWM_USE_SMOD5                  FALSE
+#define SPC5_PWM_USE_SMOD6                  FALSE
+#define SPC5_PWM_USE_SMOD7                  FALSE
+#define SPC5_PWM_SMOD4_PRIORITY             7
+#define SPC5_PWM_SMOD5_PRIORITY             7
+#define SPC5_PWM_SMOD6_PRIORITY             7
+#define SPC5_PWM_SMOD7_PRIORITY             7
+
+/*
+ * ICU driver system settings.
+ */
+#define SPC5_ICU_USE_SMOD0                  FALSE
+#define SPC5_ICU_USE_SMOD1                  FALSE
+#define SPC5_ICU_USE_SMOD2                  FALSE
+#define SPC5_ICU_USE_SMOD3                  FALSE
+#define SPC5_ICU_USE_SMOD4                  FALSE
+#define SPC5_ICU_USE_SMOD5                  FALSE
+#define SPC5_ICU_ETIMER0_PRIORITY           7
+
+#define SPC5_ICU_USE_SMOD6                  FALSE
+#define SPC5_ICU_USE_SMOD7                  FALSE
+#define SPC5_ICU_USE_SMOD8                  FALSE
+#define SPC5_ICU_USE_SMOD9                  FALSE
+#define SPC5_ICU_USE_SMOD10                 FALSE
+#define SPC5_ICU_USE_SMOD11                 FALSE
+#define SPC5_ICU_ETIMER1_PRIORITY           7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define SPC5_SERIAL_USE_LINFLEX0            TRUE
+#define SPC5_SERIAL_USE_LINFLEX1            FALSE
+#define SPC5_SERIAL_LINFLEX0_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX1_PRIORITY       8
+
+/*
+ * SPI driver system settings.
+ */
+#define SPC5_SPI_USE_DSPI0                  FALSE
+#define SPC5_SPI_USE_DSPI1                  FALSE
+#define SPC5_SPI_USE_DSPI2                  FALSE
+#define SPC5_SPI_USE_DSPI3                  FALSE
+#define SPC5_SPI_USE_DSPI4                  FALSE
+#define SPC5_SPI_DMA_MODE                   SPC5_SPI_DMA_RX_ONLY
+#define SPC5_SPI_DSPI0_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3 | SPC5_MCR_PCSIS4 | SPC5_MCR_PCSIS5 | SPC5_MCR_PCSIS6 | SPC5_MCR_PCSIS7)
+#define SPC5_SPI_DSPI1_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3 | SPC5_MCR_PCSIS4 | SPC5_MCR_PCSIS5 | SPC5_MCR_PCSIS6 | SPC5_MCR_PCSIS7)
+#define SPC5_SPI_DSPI2_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3)
+#define SPC5_SPI_DSPI3_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3)
+#define SPC5_SPI_DSPI4_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3)
+#define SPC5_SPI_DSPI0_TX1_DMA_CH_ID        4
+#define SPC5_SPI_DSPI0_TX2_DMA_CH_ID        5
+#define SPC5_SPI_DSPI0_RX_DMA_CH_ID         6
+#define SPC5_SPI_DSPI1_TX1_DMA_CH_ID        7
+#define SPC5_SPI_DSPI1_TX2_DMA_CH_ID        8
+#define SPC5_SPI_DSPI1_RX_DMA_CH_ID         9
+#define SPC5_SPI_DSPI2_TX1_DMA_CH_ID        10
+#define SPC5_SPI_DSPI2_TX2_DMA_CH_ID        11
+#define SPC5_SPI_DSPI2_RX_DMA_CH_ID         12
+#define SPC5_SPI_DSPI3_TX1_DMA_CH_ID        13
+#define SPC5_SPI_DSPI3_TX2_DMA_CH_ID        14
+#define SPC5_SPI_DSPI3_RX_DMA_CH_ID         15
+#define SPC5_SPI_DSPI4_TX1_DMA_CH_ID        1
+#define SPC5_SPI_DSPI4_TX2_DMA_CH_ID        2
+#define SPC5_SPI_DSPI4_RX_DMA_CH_ID         3
+#define SPC5_SPI_DSPI0_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI1_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI2_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI3_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI4_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI0_IRQ_PRIO             10
+#define SPC5_SPI_DSPI1_IRQ_PRIO             10
+#define SPC5_SPI_DSPI2_IRQ_PRIO             10
+#define SPC5_SPI_DSPI3_IRQ_PRIO             10
+#define SPC5_SPI_DSPI4_IRQ_PRIO             10
+#define SPC5_SPI_DMA_ERROR_HOOK(spip)       osalSysHalt("DSPI DMA failure")
+
+/*
+ * CAN driver system settings.
+ */
+#define SPC5_CAN_USE_FILTERS                FALSE
+
+#define SPC5_CAN_USE_FLEXCAN0               FALSE
+#define SPC5_CAN_FLEXCAN0_USE_EXT_CLK       FALSE
+#define SPC5_CAN_FLEXCAN0_PRIORITY          12
+#define SPC5_CAN_FLEXCAN0_START_PCTL        (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_CAN_FLEXCAN0_STOP_PCTL         (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+/*
+* ADC driver system settings.
+*/
+#define SPC5_ADC_USE_ADC0                   FALSE
+#define SPC5_ADC_ADC0_CLK_FREQUENCY         HALF_PERIPHERAL_SET_CLOCK_FREQUENCY
+#define SPC5_ADC_ADC0_AUTO_CLOCK_OFF        FALSE
+#define SPC5_ADC_ADC0_WD_PRIORITY           12
+#define SPC5_ADC_ADC0_DMA_CH_ID             1
+#define SPC5_ADC_ADC0_DMA_IRQ_PRIO          12
+#define SPC5_ADC_ADC0_START_PCTL            (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_ADC_ADC0_STOP_PCTL             (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#define SPC5_ADC_USE_ADC1                   FALSE
+#define SPC5_ADC_ADC1_CLK_FREQUENCY         HALF_PERIPHERAL_SET_CLOCK_FREQUENCY
+#define SPC5_ADC_ADC1_AUTO_CLOCK_OFF        FALSE
+#define SPC5_ADC_ADC1_WD_PRIORITY           12
+#define SPC5_ADC_ADC1_DMA_CH_ID             2
+#define SPC5_ADC_ADC1_DMA_IRQ_PRIO          12
+#define SPC5_ADC_ADC1_START_PCTL            (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_ADC_ADC1_STOP_PCTL             (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/.cproject b/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/.cproject
new file mode 100644
index 0000000..2df050d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/.cproject
@@ -0,0 +1,57 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.665946016">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.665946016" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.665946016" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.665946016." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1131493307" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1131493307.1844928918" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1106552272" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1064008669" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.2048166271" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1577341141" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.841305605" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.954135725" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.287919901" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1061591135" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-SPC563M-EVB.null.2129661677" name="RT-SPC563M-EVB"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.665946016">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-SPC563M-EVB"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/.project b/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/.project
new file mode 100644
index 0000000..ef469a7
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-SPC563M-EVB</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_EVB_SPC563M</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/Makefile b/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/Makefile
new file mode 100644
index 0000000..a83b1fd
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/Makefile
@@ -0,0 +1,188 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data.
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT =
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = no
+endif
+
+# If enabled, this option allows to compile the application in VLE mode.
+ifeq ($(USE_VLE),)
+  USE_VLE = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the optional exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/e200/compilers/GCC/mk/startup_spc563mxx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/boards/ST_EVB_SPC563M/board.mk
+include $(CHIBIOS)/os/hal/ports/SPC5/SPC563Mxx/platform.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/e200/compilers/GCC/mk/port.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/SPC563M64.ld
+
+# C sources here.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       $(CHIBIOS)/os/hal/lib/streams/memstreams.c \
+       $(CHIBIOS)/os/hal/lib/streams/chprintf.c \
+       $(CHIBIOS)/os/various/shell.c \
+       main.c
+
+# C++ sources here.
+CPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+#MCU  = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames
+MCU  = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames
+
+#TRGT = powerpc-eabi-
+TRGT = ppc-vle-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+MOT  = $(CP) -O srec
+BIN  = $(CP) -O binary
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/e200/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/UDE/debug.wsx b/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/UDE/debug.wsx
new file mode 100644
index 0000000..e72102d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/UDE/debug.wsx
@@ -0,0 +1,273 @@
+<?xml version="1.0" encoding="ISO-8859-1"?>
+<stg format="2.0">
+	<OriginalWsp type="string">debug.wsx</OriginalWsp><BackupWspFlag type="flag">0</BackupWspFlag><UseWspCnt type="int">0</UseWspCnt><WspCloseCnt type="int">0</WspCloseCnt><ProdInfo type="bin" size="52">vQTv/gAAAQAXAAIA8QkPAAAABAAAAAAAPwAAAAAAAAAEAAAAAgAAAAAAAAAAAAAAAAAAAA==</ProdInfo><ProdInfoString type="string">4.0</ProdInfoString><CreationDate type="string">11.12.2012 15:30:10:000</CreationDate><MainFrame type="key"><VisibilityGroupsMgr type="key"><Core type="key"><UsePrimaryGroup type="flag">0</UsePrimaryGroup><UseLastUsedGroup type="flag">0</UseLastUsedGroup></Core><VisibilityGroup_1 type="key"><NoOfDebugger type="int">0</NoOfDebugger><DefaultGroupName type="string">WorkspaceManager</DefaultGroupName><GroupName type="string">WorkspaceManager</GroupName><PrimaryGroup type="flag">0</PrimaryGroup><CommonGroup type="flag">1</CommonGroup></VisibilityGroup_1><VisibilityGroup_2 type="key"><Debugger_1 type="string">Core</Debugger_1><NoOfDebugger type="int">1</NoOfDebugger><DefaultGroupName type="string">Target0.Controller0.Core</DefaultGroupName><GroupName type="string">Target0.Controller0.Core</GroupName><PrimaryGroup type="flag">1</PrimaryGroup><CommonGroup type="flag">0</CommonGroup></VisibilityGroup_2><NoOfDefaultVisibilityGroups type="int">2</NoOfDefaultVisibilityGroups><NoOfVisibilityGroups type="int">2</NoOfVisibilityGroups><EnableUserSwitchOfVisibilityGroups type="flag">0</EnableUserSwitchOfVisibilityGroups><EnableDebuggerSwitchOfVisibilityGroups type="flag">0</EnableDebuggerSwitchOfVisibilityGroups><VisibilityGroupsCtrlTBCat type="int">7</VisibilityGroupsCtrlTBCat><EnableVisibilityGroups type="flag">0</EnableVisibilityGroups></VisibilityGroupsMgr><NETPlacementRoot type="key"><FormsData type="innerxml"><FormsData><Bounds><X>231</X><Y>43</Y><Width>1296</Width><Height>818</Height></Bounds><ClientSize><Width>1280</Width><Height>780</Height></ClientSize><State>Normal</State></FormsData></FormsData><DockingManagerControlData type="innerxml"><DockingManagerControlData><MDIActive>false</MDIActive><DocumentDockStyle>Top</DocumentDockStyle><DockingControls><DockingControlData><DockedDimension>1272</DockedDimension><Cancelled>false</Cancelled><DockingType>Bottom</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>true</Selected></DockingControlData><DockingControlData><DockedDimension>457</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>true</Selected></DockingControlData><DockingControlData><DockedDimension>457</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>2</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>0</DockedDimension><Cancelled>false</Cancelled><DockingType>Top</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>-1</PanelIndex><ContainerType>TabbedDocument</ContainerType><Selected>true</Selected></DockingControlData><DockingControlData><DockedDimension>457</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>3</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>457</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>1</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData></DockingControls><LeftDockingContainerControlData><DockingContainerControlData><Tabbed>true</Tabbed><Dimension>556</Dimension></DockingContainerControlData></LeftDockingContainerControlData><RightDockingContainerControlData><DockingContainerControlData><Tabbed>false</Tabbed><Dimension>200</Dimension></DockingContainerControlData></RightDockingContainerControlData><TopDockingContainerControlData><DockingContainerControlData><Tabbed>false</Tabbed><Dimension>200</Dimension></DockingContainerControlData></TopDockingContainerControlData><BottomDockingContainerControlData><DockingContainerControlData><Tabbed>true</Tabbed><Dimension>200</Dimension></DockingContainerControlData></BottomDockingContainerControlData><TabbedDocumentContainerControlData><TabbedDocumentContainerControlData><Selected>true</Selected><SplitterSize>100</SplitterSize></TabbedDocumentContainerControlData></TabbedDocumentContainerControlData></DockingManagerControlData></DockingManagerControlData><ToolbarControlData type="innerxml"><ToolbarControlData><ShowPanelShortcuts>true</ShowPanelShortcuts><ShowToolItemMessages>true</ShowToolItemMessages><TopContainer><PanelBounds><X>0</X><Y>0</Y><Width>1280</Width><Height>74</Height></PanelBounds><ToolBars><ToolbarPersistData><Bounds><X>0</X><Y>0</Y><Width>1280</Width><Height>24</Height></Bounds><Name>Platform Main Menu</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>3</X><Y>24</Y><Width>440</Width><Height>25</Height></Bounds><Name>Views Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x4_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Target Browser</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x15_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Diagnostic Message Viewer</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xF_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Console</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x0_{DED51A60-E0B7-11D4-9112-0001034962B6}</Name><Visible>true</Visible><Text>CPU Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1E_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Explore Symbols</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5C_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Single Program Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5A_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Disassembly Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x2D_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show Special Function Register</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3C_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Locals</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x46_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Watch</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Simulated I/O</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x14_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>UDE HTML</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x19_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Array Chart</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1B_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Time Traced Signal Chart</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x50_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>IP Trace Profiling</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x28_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Memory</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x46_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Call Stack</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>443</X><Y>24</Y><Width>210</Width><Height>25</Height></Bounds><Name>File Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Workspace_0x1770</Name><Visible>true</Visible><Text>New Workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1771</Name><Visible>true</Visible><Text>Open workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1772</Name><Visible>true</Visible><Text>Save workspace as</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1773</Name><Visible>true</Visible><Text>Save workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1774</Name><Visible>true</Visible><Text>Close workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177F</Name><Visible>true</Visible><Text>Export view content</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1778</Name><Visible>true</Visible><Text>Print</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Load Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>653</X><Y>24</Y><Width>95</Width><Height>25</Height></Bounds><Name>Edit Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Workspace_0x1779</Name><Visible>true</Visible><Text>Cut</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177A</Name><Visible>true</Visible><Text>Copy</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177B</Name><Visible>true</Visible><Text>Paste</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>748</X><Y>24</Y><Width>276</Width><Height>25</Height></Bounds><Name>Macro Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x3B_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Run Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x40_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Debug Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Break Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3C_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Reload Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Ctrl_{4D5190CD-077D-4F92-B890-4545242BF32A}_UDEWorkspace</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>3</X><Y>49</Y><Width>509</Width><Height>25</Height></Bounds><Name>Debug Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x18_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show IP</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5E_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show program code</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x7_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Start Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x9_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Over</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Into</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xB_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Out</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x8_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Run Cursor</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x321_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Break Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xD_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Reset</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xC_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Restart Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Breakpoints</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x6_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Toggle Break</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Ctrl_{FB7BC773-88A4-4ECE-B9B6-7189610B0735}_Core</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{1C85B31A-5D25-4197-9635-9C5DC28EAFD7}</Name><Visible>true</Visible><Text>Trigger setup</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>512</X><Y>49</Y><Width>141</Width><Height>25</Height></Bounds><Name>Config Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x3_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Target Configuration</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xFE_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Connect Target</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x100_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Disconnect Target</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x6_{1C85B31A-5D25-4197-9635-9C5DC28EAFD7}</Name><Visible>true</Visible><Text>Setup Target Interface</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x12_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>MCU Run Control</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>653</X><Y>49</Y><Width>151</Width><Height>25</Height></Bounds><Name>Tools Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Ctrl_{377CE046-823C-4A05-8828-13C25D345D77}_Core</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xE1_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Execution Time Setup</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>100</Y><Width>26</Width><Height>25</Height></Bounds><Name>Show Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>200</Y><Width>26</Width><Height>25</Height></Bounds><Name>Window Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>225</Y><Width>26</Width><Height>25</Height></Bounds><Name>Workspace Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>275</Y><Width>26</Width><Height>25</Height></Bounds><Name>Help Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData></ToolBars></TopContainer><BottomContainer><PanelBounds><X>0</X><Y>757</Y><Width>1280</Width><Height>23</Height></PanelBounds><ToolBars><ToolbarPersistData><Bounds><X>0</X><Y>0</Y><Width>1280</Width><Height>23</Height></Bounds><Name>Platform Status Bar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData/></ToolbarPersistData></ToolBars></BottomContainer><LeftContainer><PanelBounds><X>0</X><Y>74</Y><Width>0</Width><Height>683</Height></PanelBounds><ToolBars/></LeftContainer><RightContainer><PanelBounds><X>1280</X><Y>74</Y><Width>0</Width><Height>683</Height></PanelBounds><ToolBars/></RightContainer></ToolbarControlData></ToolbarControlData></NETPlacementRoot><StdTargetManagerWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">11.12.2012 15:30:17:956</FrameCreated><ViewSrv type="key"><TargetBrowserView type="key"><SplitterRatio type="int">100</SplitterRatio></TargetBrowserView></ViewSrv><NETFrameMode type="int">77824</NETFrameMode><NETFrameSaveIndex type="int">1</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">1</CommonVisibilityGroup><VisibilityGroup_1 type="string">WorkspaceManager</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdTargetManagerWin><StdUDEMessageWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">11.12.2012 15:30:17:847</FrameCreated><ViewSrv type="key"><LogWin type="key"><Index type="key"><Width type="bin" size="8">MgAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Index><Type type="key"><Width type="bin" size="8">ZAAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Type><Time type="key"><Width type="bin" size="8">ZAAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Time><Src type="key"><Width type="bin" size="8">lgAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Src><Msg type="key"><Width type="bin" size="8">6AMAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Msg></LogWin><CmdWin type="key"><History type="key"/></CmdWin></ViewSrv><NETFrameMode type="int">90112</NETFrameMode><NETFrameSaveIndex type="int">0</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">1</CommonVisibilityGroup><VisibilityGroup_1 type="string">WorkspaceManager</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdUDEMessageWin><StdUDECmdWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDECmdWin><UDETraceWin2 type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDETraceWin2><StdUDEWspHTMLView type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEWspHTMLView><TraceFramework type="key"/><SelectedPrinter type="string">\\napnt002.nap.st.com\NAPPRT0001</SelectedPrinter></MainFrame><INI_SECTION type="key"><Macro type="key"><MacroLib type="string">..\..\..\..\..\Program Files\pls\UDE 4.0\StdLibrary.mso</MacroLib></Macro><Loader type="key"><LOADER_REGKEY_WSP type="string">{866f82d3-fac5-43cd-8a82-0af01e46e2c5}</LOADER_REGKEY_WSP></Loader></INI_SECTION><AddOns type="key"><UDE.Script type="key"><MacroGuiEntries type="key"><LastScriptFilePath type="string">..\..\..\..\..\Documents and Settings\disiriog\My Documents\pls\UDE 4.0</LastScriptFilePath><Macro_23_10_13_15_42_14_0 type="key"><ScriptDescription type="string">The script contains a collection of macros to save memory content into different file formats 
+and fill target memory ranges</ScriptDescription><ScriptPath type="string">V:\UDE\AddOns\Macro\MacroLibrary\StdMacros1.dsm</ScriptPath><ScriptSource type="string">'	
+'	$Header: /Ude/AddOns/Macro/MacroLibrary/StdMacros.dsm 3     30.04.04 9:34 Weisses $
+'_______________________________________________________
+'
+'	universal debug engine
+'	 
+'	Standard command line macros - part 1 
+'
+'	pls Development Tools 1999-2004
+'
+'   28.04.04    SW     correction for UDE 1.10
+'   03.06.03    SW     initial version
+'_______________________________________________________
+
+'_______________________________________________________
+'
+'	UnAss command line function
+' 
+'	generates disassembly file 
+'
+'	command line UnAss output-file range1 [range2] [range3] .....
+'	range description:
+'		C:&lt;startaddress&gt;,&lt;length&gt; or	- code
+'		DB:&lt;startaddress&gt;,&lt;length&gt; or	- data byte
+'		DW:&lt;startaddress&gt;,&lt;length&gt; or	- data word
+'		DD:&lt;startaddress&gt;,&lt;length&gt; or	- data dword
+'_______________________________________________________
+
+Sub UnAss(File,ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	If IsNumeric(File) Then
+	  	MsgBox "File parameter wrong - " &amp; File
+		Exit Sub 		
+	End If
+	DisASMObj.OutputPath = CStr(File)
+	bRetVal = DisASMObj.CreateStream(True,"UDE Disassembler output of current Program",False)
+	If bRetVal = True Then
+		ParmeterCnt = ParameterObj.ParameterCount
+		If ParmeterCnt = 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		RangeCnt = ParmeterCnt/3
+		ParamIndex = 0
+		For Range = 0 To RangeCnt -1 
+			KindOfRange = CStr(ParameterObj.Parameter(ParamIndex)) 
+			KindOfRange = UCase(KindOfRange)
+			Address = CLng(ParameterObj.Parameter(ParamIndex +1))		
+			Length = CLng(ParameterObj.Parameter(ParamIndex +2))
+			ParamIndex = ParamIndex +3
+			If IsNumeric(KindOfRange) Then
+				If KindOfRange = 12 Then
+ 					DisASMObj.AddRange Address,Length,1
+				ElseIf KindOfRange = 219 Then
+ 					DisASMObj.AddRange Address,Length,2
+				ElseIf KindOfRange = 221 Then
+ 					DisASMObj.AddRange Address,Length,4
+				Else
+	  				MsgBox "Invalid range type " &amp; KindOfRange &amp;  "of range " &amp; Range +1
+					Exit Sub 		
+			 	End If
+			Else
+				If KindOfRange = "C" Then
+ 					DisASMObj.AddRange Address,Length,1
+				ElseIf KindOfRange = "DB" Then
+ 					DisASMObj.AddRange Address,Length,2
+				ElseIf KindOfRange = "DW" Then
+ 					DisASMObj.AddRange Address,Length,3
+				ElseIf KindOfRange = "DD" Then
+ 					DisASMObj.AddRange Address,Length,4
+				Else
+	  				MsgBox "Invalid range type " &amp; KindOfRange &amp;  "of range " &amp; Range +1
+					Exit Sub 		
+				End If
+			End If
+		Next
+		DisASMObj.HexFileModeFlag = False
+		DisASMObj.ListModeFlag = False
+		DisASMObj.WriteAllRanges(False)
+	End If
+
+End Sub
+
+'_______________________________________________________
+'
+'	SaveHEX command line function
+' 
+'	generates intel-HEX file 
+'
+'	command line SaveHex output-file range1 [range2] [range3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub SaveHEX(File,ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	If IsNumeric(File) Then
+	  	MsgBox "File parameter wrong - " &amp; File
+		Exit Sub 		
+	End If
+	DisASMObj.OutputPath = CStr(File)
+	bRetVal = DisASMObj.CreateStream(True,"UDE generated intel-Hex file of current Program",False)
+	If bRetVal = True Then
+		ParmeterCnt = ParameterObj.ParameterCount
+		If ParmeterCnt = 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		If ( ParmeterCnt Mod 2 ) &lt;&gt; 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		RangeCnt = ParmeterCnt/2
+		ParamIndex = 0
+		For Range = 0 To RangeCnt -1 
+			Address = CLng(ParameterObj.Parameter(ParamIndex))		
+			Length = CLng(ParameterObj.Parameter(ParamIndex +1))
+			ParamIndex = ParamIndex +2
+ 			DisASMObj.AddRange Address,Length,0
+		Next
+		DisASMObj.HexFileModeFlag = True
+		DisASMObj.WriteAllRanges(False)
+	End If
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillByte command line function
+' 
+'	fills memory range with byte pattern 
+'
+'	command line FillByte range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillByte(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.ByteArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1))
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillWord command line function
+' 
+'	fills memory range with word pattern 
+'
+'	command line FillWord range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillWord(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.WordArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1)/2)
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillDWord command line function
+' 
+'	fills memory range with dword pattern 
+'
+'	command line FillDWord range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillDWord(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.DWordArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1)/4)
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub</ScriptSource><ScriptArchitecture type="int">63</ScriptArchitecture><ScriptEngine type="string">VBScript</ScriptEngine><MacroFileTime type="string">24.11.2006 14:43:20:000</MacroFileTime><ScriptFromStg type="flag">1</ScriptFromStg><LocalComputerName type="string">WS_CORE_DUO</LocalComputerName><ExternalScriptPath type="string"></ExternalScriptPath><NextNodeName type="string">Macro_27_02_14_13_40_38_0</NextNodeName><UnAss type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute UnAss ..</MenuString><ToolTipString type="string">Macro UnAss</ToolTipString><MessageString type="string">Execute macro UnAss</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">2</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></UnAss><SaveHEX type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute SaveHEX ..</MenuString><ToolTipString type="string">Macro SaveHEX</ToolTipString><MessageString type="string">Execute macro SaveHEX</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">2</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></SaveHEX><FillByte type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillByte ..</MenuString><ToolTipString type="string">Macro FillByte</ToolTipString><MessageString type="string">Execute macro FillByte</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillByte><FillWord type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillWord ..</MenuString><ToolTipString type="string">Macro FillWord</ToolTipString><MessageString type="string">Execute macro FillWord</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillWord><FillDWord type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillDWord ..</MenuString><ToolTipString type="string">Macro FillDWord</ToolTipString><MessageString type="string">Execute macro FillDWord</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillDWord><NoOfFunctions type="int">5</NoOfFunctions></Macro_23_10_13_15_42_14_0></MacroGuiEntries><LastSelectedMacro type="string"></LastSelectedMacro></UDE.Script></AddOns><MultiCoreRunControl type="key"><NoOfRunCtrlGroups type="int">0</NoOfRunCtrlGroups></MultiCoreRunControl><Core type="key"><ViewSrv type="key"><PowerPcCpuWin type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW type="key"><FrameCreated type="string">26.04.2013 11:10:18:531</FrameCreated><ViewSrv type="key"/><NETFrameMode type="int">77825</NETFrameMode><NETFrameSaveIndex type="int">5</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW type="int">0</SAVED_VIEW></PowerPcCpuWin><StdUDESymbolExplWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">11.12.2012 15:30:17:987</FrameCreated><ViewSrv type="key"/><NETFrameMode type="int">77827</NETFrameMode><NETFrameSaveIndex type="int">4</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdUDESymbolExplWin><StdUDEProgWin type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW00 type="key"><FrameCreated type="string">11.12.2012 15:33:58:525</FrameCreated><ViewSrv type="key"/><SourceFile type="string">..\main.c</SourceFile><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">3</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt><SourceFileInstFlag type="int">1</SourceFileInstFlag></OPEN_VIEW00><OPEN_VIEW01 type="key"><FrameCreated type="string">18.12.2012 10:46:43:006</FrameCreated><ViewSrv type="key"/><SourceFile type="string">..\..\ChibiOS-RT_Portable_Kernel_Component\component\lib\src\chsys.c</SourceFile><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">3</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW01><SAVED_VIEW00 type="int">0</SAVED_VIEW00><SAVED_VIEW01 type="int">1</SAVED_VIEW01></StdUDEProgWin><StdUDESFRView type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW00 type="key"><FrameCreated type="string">20.12.2012 10:51:57:042</FrameCreated><ViewSrv type="key"><SFRView type="key"><NumberOfBitFieldsPerRow type="bin" size="8">AwAAAA==</NumberOfBitFieldsPerRow><BitfieldValueMode type="bin" size="8">AQAAAA==</BitfieldValueMode><NameWidth type="bin" size="8">kAAAAA==</NameWidth><ValueWidth type="bin" size="8">YAAAAA==</ValueWidth><Bitfield1Width type="bin" size="8">TgAAAA==</Bitfield1Width><Value1Width type="bin" size="8">oAAAAA==</Value1Width><Bitfield2Width type="bin" size="8">TgAAAA==</Bitfield2Width><Value2Width type="bin" size="8">oAAAAA==</Value2Width><Bitfield3Width type="bin" size="8">TgAAAA==</Bitfield3Width><Value3Width type="bin" size="8">oAAAAA==</Value3Width><Bitfield4Width type="bin" size="8">AAAAAA==</Bitfield4Width><Value4Width type="bin" size="8">AAAAAA==</Value4Width><TopIndex type="bin" size="8">AAAAAA==</TopIndex><CaretIndex type="bin" size="8">AAAAAA==</CaretIndex></SFRView></ViewSrv><NETFrameMode type="int">77826</NETFrameMode><NETFrameSaveIndex type="int">2</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW00><SAVED_VIEW00 type="int">0</SAVED_VIEW00><OPEN_VIEW01 type="key"/></StdUDESFRView><StdUDELocalsWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDELocalsWin><StdUDEWatchWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEWatchWin><StdUDESimIOWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDESimIOWin><StdUDEHtmlDocWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEHtmlDocWin><StdUDEGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEGraphWin><StdUDETimeSampleGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDETimeSampleGraphWin><UDEProfilingWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDEProfilingWin><StdUDEMemWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEMemWin><StdUDEIPTraceGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEIPTraceGraphWin><UDETraceCoverageWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDETraceCoverageWin><UDETraceProfilingWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDETraceProfilingWin><UDEStackWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDEStackWin></ViewSrv><UDE.StdDbgSrv type="key"><INI_SECTION type="key"/><UDE.PowerPcArchSrv type="key"><UDE.PpcJtagTargIntf type="key"><NewWorkspace type="flag">0</NewWorkspace></UDE.PpcJtagTargIntf></UDE.PowerPcArchSrv><UDE.UDESymbol type="key"><DefaultBinFileDir type="string">..\build</DefaultBinFileDir><BinFileDialogParam type="key"><Filter type="int">1</Filter></BinFileDialogParam><BinaryFiles type="key"><Number type="int">1</Number><BinaryFile1 type="key"><FullPath type="string">..\build\ch.elf</FullPath><Breakpoints type="key"><Breakpoint1 type="string">Software;enabled;0;disabled;'main {C:\ChibiStudio\workspace\SPC5\demos\SPC563Mxx OS-Less Test Application\main.c} .25';main.c;1;0;;$disabled; ;disabled; ;</Breakpoint1><Number type="int">1</Number></Breakpoints></BinaryFile1><BinaryFile-1 type="key"/></BinaryFiles><MultiCoreLoader type="key"><Number type="int">0</Number></MultiCoreLoader><ExpressionClipboard type="key"><Number type="int">0</Number></ExpressionClipboard></UDE.UDESymbol><STG_ADDON_PROF type="key"><UDE_Graphwin_Trace_AddOn type="key" name="UDE Graphwin Trace AddOn"><LOAD_STATE type="flag">1</LOAD_STATE></UDE_Graphwin_Trace_AddOn><UDELicense_Server type="key" name="UDELicense Server"><LOAD_STATE type="flag">1</LOAD_STATE></UDELicense_Server><UDEMemtool type="key"><LOAD_STATE type="flag">1</LOAD_STATE><FlashMod_PFLASH0 type="key"/><FlashMod_PFLASH1 type="key"/><FlashMod_PFLASH2 type="key"/><FlashMod_SHADOWFLASH type="key"/><Frontend type="key"><LastModule type="int">0</LastModule><VerifyProt type="flag">0</VerifyProt><VerifyProtFile type="string">verify.txt</VerifyProtFile><VerifyOnExit type="flag">0</VerifyOnExit><StoreLoadedSections type="flag">0</StoreLoadedSections><AutoStartProgAfterDownload type="flag">0</AutoStartProgAfterDownload><AutoCloseExecCmdDialog type="flag">0</AutoCloseExecCmdDialog><AllowOverwrite type="flag">0</AllowOverwrite></Frontend></UDEMemtool><ADD_ON_DEL_FLAG type="flag">0</ADD_ON_DEL_FLAG></STG_ADDON_PROF><CommQueueHndlStg type="key"><Beep type="flag">0</Beep><Retry type="flag">0</Retry><RetryPeriod type="int">0</RetryPeriod></CommQueueHndlStg><TargetStateHndlStg type="key"/></UDE.StdDbgSrv><MRUSourceFileList type="key"><NoOfMRUSrcFileEntries type="int">1</NoOfMRUSrcFileEntries><MRUSrcFile0 type="string">..\main.c</MRUSrcFile0></MRUSourceFileList></Core><TargetInfoFile type="string">stm_xpc563m64_minimodule_debug_jtag.cfg</TargetInfoFile><LastWriteDate type="string">27.02.2014 13:40:38:000</LastWriteDate></stg>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/UDE/stm_xpc563m64_minimodule_debug_jtag.cfg b/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/UDE/stm_xpc563m64_minimodule_debug_jtag.cfg
new file mode 100644
index 0000000..b43d928
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/UDE/stm_xpc563m64_minimodule_debug_jtag.cfg
@@ -0,0 +1,185 @@
+[Main]
+Signature=UDE_TARGINFO_2.0
+Description=STM XPC563M Mini Module with SPC563M64 1.5M (Jtag)
+Description1=MMU preinitialized, memory mapping 1:1, VLE enabled for SRAM and Flash
+Description2=PLL set for 80MHz
+Description3=FLASH programming prepared but not enabled
+Description4=Write Filter for BAM Module
+MCUs=Controller0
+Architecture=PowerPC
+Vendor=STM
+Board=XPC563M Mini Module
+
+[Controller0]
+Family=PowerPC
+Type=SPC563M64
+Enabled=1
+IntClock=80000
+MemDevs=BAMWriteFilter
+ExtClock=12000
+
+[Controller0.Core]
+Protocol=PPCJTAG
+Enabled=1
+
+[Controller0.Core.LoadedAddOn]
+UDEMemtool=1
+
+[Controller0.Core.PpcJtagTargIntf]
+PortType=FTDI
+ResetWaitTime=50
+MaxJtagClk=1000
+DoSramInit=1
+UseNexus=1
+AdaptiveJtagPhaseShift=1
+ConnOption=Reset
+ChangeJtagClk=-1
+HaltAfterReset=1
+SimioAddr=g_JtagSimioAccess
+FreezeTimers=1
+InvalidTlbOnReset=1
+InvalidateCache=0
+ForceCacheFlush=0
+IgnoreLockedLines=0
+ExecInitCmds=1
+JtagTapNumber=0
+JtagNumOfTaps=1
+JtagNumIrBefore=0
+JtagNumIrAfter=0
+
+SimioAddr=g_JtagSimioAccess
+
+FlushCache=0
+AllowMmuSetup=1
+UseExtReset=1
+HandleWdtBug=0
+ForceEndOfReset=0
+CommDevSel=PortType=USB,Type=FTDI
+JtagViaPod=1
+TargetPort=Default
+ChangeMsr=0
+ChangeMsrValue=0x0
+ExecOnStartCmds=0
+ExecOnHaltCmds=0
+EnableProgramTimeMeasurement=0
+UseHwResetMode=1
+HandleNexusAccessBug=0
+DoNotEnableTrapSwBrp=0
+AllowResetOnCheck=0
+BootPasswd0=0xFEEDFACE
+BootPasswd1=0xCAFEBEEF
+BootPasswd2=0xFFFFFFFF
+BootPasswd3=0xFFFFFFFF
+BootPasswd4=0xFFFFFFFF
+BootPasswd5=0xFFFFFFFF
+BootPasswd6=0xFFFFFFFF
+BootPasswd7=0xFFFFFFFF
+JtagIoType=Jtag
+ExecOnHaltCmdsWhileHalted=0
+TimerForPTM=Default
+AllowBreakOnUpdateBreakpoints=0
+ClearDebugStatusOnHalt=1
+HwResetMode=Execute
+UseMasterNexusIfResetState=1
+UseLocalAddressTranslation=1
+Use64BitNexus=0
+InitSramOnlyWhenNotInitialized=0
+DisableE2EECC=0
+AllowHarrForUpdateDebugRegs=0
+UseCore0ForNexusMemoryAccessWhileRunning=0
+
+[Controller0.BAMWriteFilter]
+Description=BAM WriteAccess Filter
+Range0Start=0xFFFFC000
+Range0Size=0x4000
+Enabled=1
+Handler=AccessFilter
+Mode=ReadOnly
+
+[Controller0.PFLASH0]
+Enabled=1
+EnableMemtoolByDefault=1
+
+[Controller0.PFLASH1]
+Enabled=1
+EnableMemtoolByDefault=1
+
+[Controller0.PFLASH2]
+Enabled=1
+EnableMemtoolByDefault=1
+
+[Controller0.Core.PpcJtagTargIntf.InitScript]
+
+// TLB invalidate
+SETSPR 0x3F4 0x2 0xFFFFFFFF
+// select TLB 1
+SETSPR 0x274 0x10000108 0xFFFFFFFF
+
+// programm peripheral B modules
+// TLB 1, entry 0
+SETSPR 0x270 0x10000000 0xFFFFFFFF
+// Valid, protect against invalidation, global entry, size=1MB
+SETSPR 0x271 0xC0000500 0xFFFFFFFF
+// effective page number FFF00000, I,G
+SETSPR 0x272 0xFFF0000A 0xFFFFFFFF
+// real page FFF00000, UX,SX,UW,SW,UR,SR
+SETSPR 0x273 0xFFF0003F 0xFFFFFFFF
+// execute TLB write instruction
+EXECOPCODE 0x7C0007A4
+
+// programm internal Flash, no cache because of flash
+// TLB 1, entry 1
+SETSPR 0x270 0x10010000 0xFFFFFFFF
+// Valid, protect against invalidation, global entry, size=16MB
+SETSPR 0x271 0xC0000700 0xFFFFFFFF
+// effective page number 00000000
+SETSPR 0x272 0x28 0xFFFFFFFF
+// real page 00000000, UX,SX,UW,SW,UR,SR
+SETSPR 0x273 0x3F 0xFFFFFFFF
+// execute TLB write instruction
+EXECOPCODE 0x7C0007A4
+
+// programm internal SRAM
+// TLB 1, entry 2
+SETSPR 0x270 0x10020000 0xFFFFFFFF
+// Valid, protect against invalidation, global entry, size=256k
+SETSPR 0x271 0xC0000400 0xFFFFFFFF
+// effective page number 40000000, I
+SETSPR 0x272 0x40000028 0xFFFFFFFF
+// real page 0x40000028, UX,SX,UW,SW,UR,SR
+SETSPR 0x273 0x4000003F 0xFFFFFFFF
+// execute TLB write instruction
+EXECOPCODE 0x7C0007A4
+
+// programm peripheral A modules
+// TLB 1, entry 4
+SETSPR 0x270 0x10030000 0xFFFFFFFF
+// Valid, protect against invalidation, global entry, size=1MB
+SETSPR 0x271 0xC0000500 0xFFFFFFFF
+// effective page number C3F00000, I
+SETSPR 0x272 0xC3F0000A 0xFFFFFFFF
+// real page C3F00000, UX,SX,UW,SW,UR,SR
+SETSPR 0x273 0xC3F0003F 0xFFFFFFFF
+// execute TLB write instruction
+EXECOPCODE 0x7C0007A4
+
+// setup IVOPR
+// points to internal memory at 0x40000000
+SETSPR 0x3F 0x40000000 0xFFFFFFFF
+// MMU data error vector offset
+SETSPR 0x19D 0x0 0xFFFFFFFF
+// MMU instruction error vector offset
+
+// setup clock to 80MHz
+//SET FMPLL_SYNCR 0x28000000 0xFFFFFFFF
+//WAIT 0x5
+
+// disable watchdog
+SET SWT_CR 0xFF00000A
+
+// set NEXUS priority to above cpu instruction for runtime access
+//SET XBAR_MPR3 0x321
+
+[Controller0.Core.PpcJtagTargIntf.OnStartScript]
+
+[Controller0.Core.PpcJtagTargIntf.OnHaltScript]
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/chconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/chconf.h
new file mode 100644
index 0000000..f6244ad
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/halconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/halconf.h
new file mode 100644
index 0000000..6827953
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/halconf.h
@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM                  FALSE
+#endif
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/main.c b/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/main.c
new file mode 100644
index 0000000..ab881fd
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/main.c
@@ -0,0 +1,185 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+#include "shell.h"
+#include "chprintf.h"
+
+#define SHELL_WA_SIZE   THD_WORKING_AREA_SIZE(1024)
+#define TEST_WA_SIZE    THD_WORKING_AREA_SIZE(256)
+
+static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
+  size_t n, size;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: mem\r\n");
+    return;
+  }
+  n = chHeapStatus(NULL, &size);
+  chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX());
+  chprintf(chp, "heap fragments   : %u\r\n", n);
+  chprintf(chp, "heap free total  : %u bytes\r\n", size);
+}
+
+static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
+  static const char *states[] = {CH_STATE_NAMES};
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: threads\r\n");
+    return;
+  }
+  chprintf(chp, "    addr    stack prio refs     state time\r\n");
+  tp = chRegFirstThread();
+  do {
+    chprintf(chp, "%08lx %08lx %4lu %4lu %9s\r\n",
+            (uint32_t)tp, (uint32_t)tp->p_ctx.sp,
+            (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
+            states[tp->p_state]);
+    tp = chRegNextThread(tp);
+  } while (tp != NULL);
+}
+
+static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: test\r\n");
+    return;
+  }
+  tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(),
+                           TestThread, chp);
+  if (tp == NULL) {
+    chprintf(chp, "out of memory\r\n");
+    return;
+  }
+  chThdWait(tp);
+}
+
+static const ShellCommand commands[] = {
+  {"mem", cmd_mem},
+  {"threads", cmd_threads},
+  {"test", cmd_test},
+  {NULL, NULL}
+};
+
+static const ShellConfig shell_cfg1 = {
+  (BaseSequentialStream *)&SD1,
+  commands
+};
+
+/*
+ * LEDs blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+
+  while (true) {
+    unsigned i;
+
+    for (i = 0; i < 4; i++) {
+      palClearPad(PORT11, P11_LED1);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT11, P11_LED2);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT11, P11_LED3);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT11, P11_LED4);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT11, P11_LED1);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT11, P11_LED2);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT11, P11_LED3);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT11, P11_LED4);
+      chThdSleepMilliseconds(300);
+    }
+
+    for (i = 0; i < 4; i++) {
+      palTogglePad(PORT11, P11_LED1);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT11, P11_LED1);
+      palTogglePad(PORT11, P11_LED2);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT11, P11_LED2);
+      palTogglePad(PORT11, P11_LED3);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT11, P11_LED3);
+      palTogglePad(PORT11, P11_LED4);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT11, P11_LED4);
+    }
+
+    palSetPort(PORT11,
+               PAL_PORT_BIT(P11_LED1) | PAL_PORT_BIT(P11_LED2) |
+               PAL_PORT_BIT(P11_LED3) | PAL_PORT_BIT(P11_LED4));
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+  thread_t *shelltp = NULL;
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Shell manager initialization.
+   */
+  shellInit();
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   */
+  sdStart(&SD1, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity.
+   */
+  while (true) {
+    if (!shelltp)
+      shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
+    else if (chThdTerminatedX(shelltp)) {
+      chThdRelease(shelltp);    /* Recovers memory of the previous shell.   */
+      shelltp = NULL;           /* Triggers spawning of a new shell.        */
+    }
+    chThdSleepMilliseconds(1000);
+  }
+  return 0;
+}
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/mcuconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/mcuconf.h
new file mode 100644
index 0000000..e8f7ebd
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC563M-EVB/mcuconf.h
@@ -0,0 +1,158 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * SPC563Mxx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 1...15       Lowest...Highest.
+ * DMA priorities:
+ * 0...15       Highest...Lowest.
+ */
+
+#define SPC563Mxx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define SPC5_NO_INIT                        FALSE
+#define SPC5_CLK_BYPASS                     FALSE
+#define SPC5_ALLOW_OVERCLOCK                FALSE
+#define SPC5_CLK_PREDIV_VALUE               2
+#define SPC5_CLK_MFD_VALUE                  80
+#define SPC5_CLK_RFD                        SPC5_RFD_DIV4
+#define SPC5_FLASH_BIUCR                    (BIUCR_BANK1_TOO |              \
+                                             BIUCR_MASTER4_PREFETCH |       \
+                                             BIUCR_MASTER0_PREFETCH |       \
+                                             BIUCR_DPFEN |                  \
+                                             BIUCR_IPFEN |                  \
+                                             BIUCR_PFLIM_ON_MISS |          \
+                                             BIUCR_BFEN)
+#define SPC5_EMIOS_GPRE_VALUE               20
+
+/*
+ * EDMA driver settings.
+ */
+#define SPC5_EDMA_CR_SETTING                (EDMA_CR_GRP1PRI(1) |           \
+                                             EDMA_CR_GRP0PRI(0) |           \
+                                             EDMA_CR_EMLM       |           \
+                                             EDMA_CR_ERGA)
+#define SPC5_EDMA_GROUP0_PRIORITIES         0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+#define SPC5_EDMA_GROUP1_PRIORITIES         0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+#define SPC5_EDMA_ERROR_IRQ_PRIO            12
+#define SPC5_EDMA_ERROR_HANDLER()           osalSysHalt("DMA failure")
+
+/*
+ * ADC driver settings.
+ */
+#define SPC5_ADC_USE_ADC0_Q0                FALSE
+#define SPC5_ADC_USE_ADC0_Q1                FALSE
+#define SPC5_ADC_USE_ADC0_Q2                FALSE
+#define SPC5_ADC_USE_ADC1_Q3                FALSE
+#define SPC5_ADC_USE_ADC1_Q4                FALSE
+#define SPC5_ADC_USE_ADC1_Q5                FALSE
+#define SPC5_ADC_FIFO0_DMA_IRQ_PRIO         12
+#define SPC5_ADC_FIFO1_DMA_IRQ_PRIO         12
+#define SPC5_ADC_FIFO2_DMA_IRQ_PRIO         12
+#define SPC5_ADC_FIFO3_DMA_IRQ_PRIO         12
+#define SPC5_ADC_FIFO4_DMA_IRQ_PRIO         12
+#define SPC5_ADC_FIFO5_DMA_IRQ_PRIO         12
+#define SPC5_ADC_CR_CLK_PS                  ADC_CR_CLK_PS(5)
+#define SPC5_ADC_PUDCR                      {ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE}
+
+/*
+ * SERIAL driver system settings.
+ */
+#define SPC5_USE_ESCIA                      TRUE
+#define SPC5_USE_ESCIB                      FALSE
+#define SPC5_ESCIA_PRIORITY                 8
+#define SPC5_ESCIB_PRIORITY                 8
+
+/*
+ * SPI driver system settings.
+ */
+#define SPC5_SPI_USE_DSPI1                  FALSE
+#define SPC5_SPI_USE_DSPI2                  FALSE
+#define SPC5_SPI_DMA_MODE                   SPC5_SPI_DMA_RX_ONLY
+#define SPC5_SPI_DSPI1_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3 | SPC5_MCR_PCSIS4 | SPC5_MCR_PCSIS5)
+#define SPC5_SPI_DSPI2_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3 | SPC5_MCR_PCSIS4 | SPC5_MCR_PCSIS5)
+#define SPC5_SPI_DSPI1_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI2_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI1_IRQ_PRIO             10
+#define SPC5_SPI_DSPI2_IRQ_PRIO             10
+#define SPC5_SPI_DMA_ERROR_HOOK(spip)       osalSysHalt("DSPI DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define SPC5_ICU_USE_EMIOS_CH1              FALSE
+#define SPC5_ICU_USE_EMIOS_CH2              FALSE
+#define SPC5_ICU_USE_EMIOS_CH3              FALSE
+#define SPC5_ICU_USE_EMIOS_CH4              FALSE
+#define SPC5_ICU_USE_EMIOS_CH5              FALSE
+#define SPC5_ICU_USE_EMIOS_CH6              FALSE
+#define SPC5_ICU_USE_EMIOS_CH11             FALSE
+#define SPC5_ICU_USE_EMIOS_CH13             FALSE
+#define SPC5_EMIOS_FLAG_F1_PRIORITY         8
+#define SPC5_EMIOS_FLAG_F2_PRIORITY         8
+#define SPC5_EMIOS_FLAG_F3_PRIORITY         8
+#define SPC5_EMIOS_FLAG_F4_PRIORITY         8
+#define SPC5_EMIOS_FLAG_F5_PRIORITY         8
+#define SPC5_EMIOS_FLAG_F6_PRIORITY         8
+#define SPC5_EMIOS_FLAG_F11_PRIORITY        8
+#define SPC5_EMIOS_FLAG_F13_PRIORITY        8
+
+/*
+ * PWM driver system settings.
+ */
+#define SPC5_PWM_USE_EMIOS_CH0              FALSE
+#define SPC5_PWM_USE_EMIOS_CH8              FALSE
+#define SPC5_PWM_USE_EMIOS_CH9              FALSE
+#define SPC5_PWM_USE_EMIOS_CH10             FALSE
+#define SPC5_PWM_USE_EMIOS_CH12             FALSE
+#define SPC5_PWM_USE_EMIOS_CH14             FALSE
+#define SPC5_PWM_USE_EMIOS_CH15             FALSE
+#define SPC5_PWM_USE_EMIOS_CH23             FALSE
+#define SPC5_EMIOS_FLAG_F0_PRIORITY         8
+#define SPC5_EMIOS_FLAG_F8_PRIORITY         8
+#define SPC5_EMIOS_FLAG_F9_PRIORITY         8
+#define SPC5_EMIOS_FLAG_F10_PRIORITY        8
+#define SPC5_EMIOS_FLAG_F12_PRIORITY        8
+#define SPC5_EMIOS_FLAG_F14_PRIORITY        8
+#define SPC5_EMIOS_FLAG_F15_PRIORITY        8
+#define SPC5_EMIOS_FLAG_F23_PRIORITY        8
+
+/*
+ * CAN driver system settings.
+ */
+#define SPC5_CAN_USE_FILTERS                FALSE
+
+#define SPC5_CAN_USE_FLEXCAN0               FALSE
+#define SPC5_CAN_FLEXCAN0_USE_EXT_CLK       FALSE
+#define SPC5_CAN_FLEXCAN0_IRQ_PRIORITY      11
+
+#define SPC5_CAN_USE_FLEXCAN1               FALSE
+#define SPC5_CAN_FLEXCAN1_USE_EXT_CLK       FALSE
+#define SPC5_CAN_FLEXCAN1_IRQ_PRIORITY      11
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/.cproject b/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/.cproject
new file mode 100644
index 0000000..2809e06
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/.cproject
@@ -0,0 +1,57 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.665946016">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.665946016" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.665946016" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.665946016." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1131493307" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1131493307.1844928918" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1106552272" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1064008669" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.2048166271" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1577341141" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.841305605" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.954135725" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.287919901" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1061591135" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-SPC564A-EVB.null.2129661677" name="RT-SPC564A-EVB"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.665946016">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-SPC564A-EVB"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/.project b/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/.project
new file mode 100644
index 0000000..a1b48ba
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-SPC564A-EVB</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_EVB_SPC564A</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/Makefile b/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/Makefile
new file mode 100644
index 0000000..552d0b7
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/Makefile
@@ -0,0 +1,188 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data.
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT =
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = no
+endif
+
+# If enabled, this option allows to compile the application in VLE mode.
+ifeq ($(USE_VLE),)
+  USE_VLE = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the optional exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/e200/compilers/GCC/mk/startup_spc564axx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/boards/ST_EVB_SPC564A/board.mk
+include $(CHIBIOS)/os/hal/ports/SPC5/SPC564Axx/platform.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/e200/compilers/GCC/mk/port.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/SPC564A80.ld
+
+# C sources here.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       $(CHIBIOS)/os/hal/lib/streams/memstreams.c \
+       $(CHIBIOS)/os/hal/lib/streams/chprintf.c \
+       $(CHIBIOS)/os/various/shell.c \
+       main.c
+
+# C++ sources here.
+CPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+#MCU  = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames
+MCU  = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames
+
+#TRGT = powerpc-eabi-
+TRGT = ppc-vle-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+MOT  = $(CP) -O srec
+BIN  = $(CP) -O binary
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/e200/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/UDE/debug.wsx b/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/UDE/debug.wsx
new file mode 100644
index 0000000..f9f01f1
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/UDE/debug.wsx
@@ -0,0 +1,275 @@
+<?xml version="1.0" encoding="ISO-8859-1"?>
+<stg format="2.0">
+	<OriginalWsp type="string">debug.wsx</OriginalWsp><BackupWspFlag type="flag">0</BackupWspFlag><UseWspCnt type="int">0</UseWspCnt><WspCloseCnt type="int">1</WspCloseCnt><ProdInfo type="bin" size="52">vQTv/gAAAQAXAAIA8QkPAAAABAAAAAAAPwAAAAAAAAAEAAAAAgAAAAAAAAAAAAAAAAAAAA==</ProdInfo><ProdInfoString type="string">4.0</ProdInfoString><CreationDate type="string">18.03.2013 09:20:44:999</CreationDate><MainFrame type="key"><VisibilityGroupsMgr type="key"><Core type="key"><UsePrimaryGroup type="flag">0</UsePrimaryGroup><UseLastUsedGroup type="flag">0</UseLastUsedGroup></Core><VisibilityGroup_1 type="key"><NoOfDebugger type="int">0</NoOfDebugger><DefaultGroupName type="string">WorkspaceManager</DefaultGroupName><GroupName type="string">WorkspaceManager</GroupName><PrimaryGroup type="flag">0</PrimaryGroup><CommonGroup type="flag">1</CommonGroup></VisibilityGroup_1><VisibilityGroup_2 type="key"><Debugger_1 type="string">Core</Debugger_1><NoOfDebugger type="int">1</NoOfDebugger><DefaultGroupName type="string">Target0.Controller0.Core</DefaultGroupName><GroupName type="string">Target0.Controller0.Core</GroupName><PrimaryGroup type="flag">1</PrimaryGroup><CommonGroup type="flag">0</CommonGroup></VisibilityGroup_2><NoOfDefaultVisibilityGroups type="int">2</NoOfDefaultVisibilityGroups><NoOfVisibilityGroups type="int">2</NoOfVisibilityGroups><EnableUserSwitchOfVisibilityGroups type="flag">0</EnableUserSwitchOfVisibilityGroups><EnableDebuggerSwitchOfVisibilityGroups type="flag">0</EnableDebuggerSwitchOfVisibilityGroups><VisibilityGroupsCtrlTBCat type="int">7</VisibilityGroupsCtrlTBCat><EnableVisibilityGroups type="flag">0</EnableVisibilityGroups></VisibilityGroupsMgr><NETPlacementRoot type="key"><FormsData type="innerxml"><FormsData><Bounds><X>205</X><Y>15</Y><Width>1296</Width><Height>871</Height></Bounds><ClientSize><Width>1280</Width><Height>833</Height></ClientSize><State>Normal</State></FormsData></FormsData><DockingManagerControlData type="innerxml"><DockingManagerControlData><MDIActive>false</MDIActive><DocumentDockStyle>Top</DocumentDockStyle><DockingControls><DockingControlData><DockedDimension>1272</DockedDimension><Cancelled>false</Cancelled><DockingType>Bottom</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>true</Selected></DockingControlData><DockingControlData><DockedDimension>510</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>true</Selected></DockingControlData><DockingControlData><DockedDimension>510</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>1</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>0</DockedDimension><Cancelled>false</Cancelled><DockingType>Top</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>-1</PanelIndex><ContainerType>TabbedDocument</ContainerType><Selected>true</Selected></DockingControlData><DockingControlData><DockedDimension>510</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>2</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>510</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>3</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData></DockingControls><LeftDockingContainerControlData><DockingContainerControlData><Tabbed>true</Tabbed><Dimension>589</Dimension></DockingContainerControlData></LeftDockingContainerControlData><RightDockingContainerControlData><DockingContainerControlData><Tabbed>false</Tabbed><Dimension>200</Dimension></DockingContainerControlData></RightDockingContainerControlData><TopDockingContainerControlData><DockingContainerControlData><Tabbed>false</Tabbed><Dimension>200</Dimension></DockingContainerControlData></TopDockingContainerControlData><BottomDockingContainerControlData><DockingContainerControlData><Tabbed>true</Tabbed><Dimension>200</Dimension></DockingContainerControlData></BottomDockingContainerControlData><TabbedDocumentContainerControlData><TabbedDocumentContainerControlData><Selected>true</Selected><SplitterSize>100</SplitterSize></TabbedDocumentContainerControlData></TabbedDocumentContainerControlData></DockingManagerControlData></DockingManagerControlData><ToolbarControlData type="innerxml"><ToolbarControlData><ShowPanelShortcuts>true</ShowPanelShortcuts><ShowToolItemMessages>true</ShowToolItemMessages><TopContainer><PanelBounds><X>0</X><Y>0</Y><Width>1280</Width><Height>74</Height></PanelBounds><ToolBars><ToolbarPersistData><Bounds><X>0</X><Y>0</Y><Width>1280</Width><Height>24</Height></Bounds><Name>Platform Main Menu</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>3</X><Y>24</Y><Width>440</Width><Height>25</Height></Bounds><Name>Views Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x4_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Target Browser</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x15_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Diagnostic Message Viewer</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xF_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Console</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x0_{DED51A60-E0B7-11D4-9112-0001034962B6}</Name><Visible>true</Visible><Text>CPU Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1E_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Explore Symbols</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5C_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Single Program Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5A_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Disassembly Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x2D_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show Special Function Register</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3C_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Locals</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x46_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Watch</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Simulated I/O</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x14_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>UDE HTML</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x19_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Array Chart</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1B_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Time Traced Signal Chart</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x50_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>IP Trace Profiling</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x28_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Memory</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x46_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Call Stack</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>443</X><Y>24</Y><Width>95</Width><Height>25</Height></Bounds><Name>Edit Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Workspace_0x1779</Name><Visible>true</Visible><Text>Cut</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177A</Name><Visible>true</Visible><Text>Copy</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177B</Name><Visible>true</Visible><Text>Paste</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>538</X><Y>24</Y><Width>276</Width><Height>25</Height></Bounds><Name>Macro Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x3B_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Run Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x40_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Debug Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Break Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3C_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Reload Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Ctrl_{4D5190CD-077D-4F92-B890-4545242BF32A}_UDEWorkspace</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>814</X><Y>24</Y><Width>210</Width><Height>25</Height></Bounds><Name>File Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Workspace_0x1770</Name><Visible>true</Visible><Text>New Workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1771</Name><Visible>true</Visible><Text>Open workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1772</Name><Visible>true</Visible><Text>Save workspace as</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1773</Name><Visible>true</Visible><Text>Save workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1774</Name><Visible>true</Visible><Text>Close workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177F</Name><Visible>true</Visible><Text>Export view content</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1778</Name><Visible>true</Visible><Text>Print</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Load Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>3</X><Y>49</Y><Width>141</Width><Height>25</Height></Bounds><Name>Config Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x3_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Target Configuration</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xFE_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Connect Target</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x100_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Disconnect Target</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x6_{1C85B31A-5D25-4197-9635-9C5DC28EAFD7}</Name><Visible>true</Visible><Text>Setup Target Interface</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x12_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>MCU Run Control</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>144</X><Y>49</Y><Width>509</Width><Height>25</Height></Bounds><Name>Debug Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x18_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show IP</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5E_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show program code</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x7_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Start Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x9_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Over</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Into</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xB_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Out</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x8_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Run Cursor</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x321_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Break Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xD_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Reset</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xC_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Restart Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Breakpoints</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x6_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Toggle Break</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Ctrl_{FB7BC773-88A4-4ECE-B9B6-7189610B0735}_Core</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{1C85B31A-5D25-4197-9635-9C5DC28EAFD7}</Name><Visible>true</Visible><Text>Trigger setup</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>653</X><Y>49</Y><Width>151</Width><Height>25</Height></Bounds><Name>Tools Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Ctrl_{377CE046-823C-4A05-8828-13C25D345D77}_Core</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xE1_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Execution Time Setup</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>100</Y><Width>26</Width><Height>25</Height></Bounds><Name>Show Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>200</Y><Width>26</Width><Height>25</Height></Bounds><Name>Window Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>225</Y><Width>26</Width><Height>25</Height></Bounds><Name>Workspace Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>275</Y><Width>26</Width><Height>25</Height></Bounds><Name>Help Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData></ToolBars></TopContainer><BottomContainer><PanelBounds><X>0</X><Y>810</Y><Width>1280</Width><Height>23</Height></PanelBounds><ToolBars><ToolbarPersistData><Bounds><X>0</X><Y>0</Y><Width>1280</Width><Height>23</Height></Bounds><Name>Platform Status Bar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData/></ToolbarPersistData></ToolBars></BottomContainer><LeftContainer><PanelBounds><X>0</X><Y>74</Y><Width>0</Width><Height>736</Height></PanelBounds><ToolBars/></LeftContainer><RightContainer><PanelBounds><X>1280</X><Y>74</Y><Width>0</Width><Height>736</Height></PanelBounds><ToolBars/></RightContainer></ToolbarControlData></ToolbarControlData></NETPlacementRoot><StdTargetManagerWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">18.03.2013 09:21:14:097</FrameCreated><ViewSrv type="key"><TargetBrowserView type="key"><SplitterRatio type="int">100</SplitterRatio></TargetBrowserView></ViewSrv><NETFrameMode type="int">77824</NETFrameMode><NETFrameSaveIndex type="int">1</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">1</CommonVisibilityGroup><VisibilityGroup_1 type="string">WorkspaceManager</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdTargetManagerWin><StdUDEMessageWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">18.03.2013 09:21:13:723</FrameCreated><ViewSrv type="key"><LogWin type="key"><Index type="key"><Width type="bin" size="8">MgAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Index><Type type="key"><Width type="bin" size="8">ZAAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Type><Time type="key"><Width type="bin" size="8">ZAAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Time><Src type="key"><Width type="bin" size="8">lgAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Src><Msg type="key"><Width type="bin" size="8">6AMAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Msg></LogWin><CmdWin type="key"><History type="key"/></CmdWin></ViewSrv><NETFrameMode type="int">90112</NETFrameMode><NETFrameSaveIndex type="int">0</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">1</CommonVisibilityGroup><VisibilityGroup_1 type="string">WorkspaceManager</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdUDEMessageWin><StdUDECmdWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS><OPEN_VIEW type="key"><FrameCreated type="string">23.04.2013 11:24:02:240</FrameCreated><ViewSrv type="key"><History0 type="string"></History0><History1 type="string"></History1><History2 type="string"></History2><History3 type="string"></History3><History4 type="string"></History4><History5 type="string"></History5><History6 type="string"></History6><History7 type="string"></History7><History8 type="string"></History8><History9 type="string"></History9><History10 type="string"></History10><History11 type="string"></History11><History12 type="string"></History12><History13 type="string"></History13><History14 type="string"></History14><History15 type="string"></History15><History16 type="string"></History16><History17 type="string"></History17><History18 type="string"></History18><History19 type="string"></History19><History20 type="string"></History20><History21 type="string"></History21><History22 type="string"></History22><History23 type="string"></History23><History24 type="string"></History24><History25 type="string"></History25><History26 type="string"></History26><History27 type="string"></History27><History28 type="string"></History28><History29 type="string"></History29><History30 type="string"></History30><History31 type="string"></History31><History32 type="string"></History32><History33 type="string"></History33><History34 type="string"></History34><History35 type="string"></History35><History36 type="string"></History36><History37 type="string"></History37><History38 type="string"></History38><History39 type="string"></History39><History40 type="string"></History40><History41 type="string"></History41><History42 type="string"></History42><History43 type="string"></History43><History44 type="string"></History44><History45 type="string"></History45><History46 type="string"></History46><History47 type="string"></History47><History48 type="string"></History48><History49 type="string"></History49><History50 type="string"></History50><History51 type="string"></History51><History52 type="string"></History52><History53 type="string"></History53><History54 type="string"></History54><History55 type="string"></History55><History56 type="string"></History56><History57 type="string"></History57><History58 type="string"></History58><History59 type="string"></History59><History60 type="string"></History60><History61 type="string"></History61><History62 type="string"></History62><History63 type="string"></History63><History64 type="string"></History64><History65 type="string"></History65><History66 type="string"></History66><History67 type="string"></History67><History68 type="string"></History68><History69 type="string"></History69><History70 type="string"></History70><History71 type="string"></History71><History72 type="string"></History72><History73 type="string"></History73><History74 type="string"></History74><History75 type="string"></History75><History76 type="string"></History76><History77 type="string"></History77><History78 type="string"></History78><History79 type="string"></History79><History80 type="string"></History80><History81 type="string"></History81><History82 type="string"></History82><History83 type="string"></History83><History84 type="string"></History84><History85 type="string"></History85><History86 type="string"></History86><History87 type="string"></History87><History88 type="string"></History88><History89 type="string"></History89><History90 type="string"></History90><History91 type="string"></History91><History92 type="string"></History92><History93 type="string"></History93><History94 type="string"></History94><History95 type="string"></History95><History96 type="string"></History96><History97 type="string"></History97><History98 type="string"></History98><History99 type="string"></History99><DefParaFormat type="bin" size="156">nAAAAD8AAYAAAAAAAAAAAAAAAAAAAAAAAQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA</DefParaFormat></ViewSrv><NETFrameMode type="int">90113</NETFrameMode><NETFrameSaveIndex type="int">6</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">1</CommonVisibilityGroup><VisibilityGroup_1 type="string">WorkspaceManager</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW type="int">0</SAVED_VIEW></StdUDECmdWin><UDETraceWin2 type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDETraceWin2><StdUDEWspHTMLView type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEWspHTMLView><SelectedPrinter type="string">\\napnt002.nap.st.com\NAPPRT0001</SelectedPrinter><TraceFramework type="key"/></MainFrame><INI_SECTION type="key"><Macro type="key"><MacroLib type="string">..\..\..\..\..\Program Files\pls\UDE 4.0\StdLibrary.mso</MacroLib></Macro><Loader type="key"><LOADER_REGKEY_WSP type="string">{866f82d3-fac5-43cd-8a82-0af01e46e2c5}</LOADER_REGKEY_WSP></Loader></INI_SECTION><AddOns type="key"><UDE.Script type="key"><MacroGuiEntries type="key"><LastScriptFilePath type="string">..\..\..\..\..\Documents and Settings\disiriog\My Documents\pls\UDE 4.0</LastScriptFilePath><Macro_23_04_13_13_50_43_0 type="key"><ScriptDescription type="string">The script contains a collection of macros to save memory content into different file formats 
+and fill target memory ranges</ScriptDescription><ScriptPath type="string">V:\UDE\AddOns\Macro\MacroLibrary\StdMacros1.dsm</ScriptPath><ScriptSource type="string">'	
+'	$Header: /Ude/AddOns/Macro/MacroLibrary/StdMacros.dsm 3     30.04.04 9:34 Weisses $
+'_______________________________________________________
+'
+'	universal debug engine
+'	 
+'	Standard command line macros - part 1 
+'
+'	pls Development Tools 1999-2004
+'
+'   28.04.04    SW     correction for UDE 1.10
+'   03.06.03    SW     initial version
+'_______________________________________________________
+
+'_______________________________________________________
+'
+'	UnAss command line function
+' 
+'	generates disassembly file 
+'
+'	command line UnAss output-file range1 [range2] [range3] .....
+'	range description:
+'		C:&lt;startaddress&gt;,&lt;length&gt; or	- code
+'		DB:&lt;startaddress&gt;,&lt;length&gt; or	- data byte
+'		DW:&lt;startaddress&gt;,&lt;length&gt; or	- data word
+'		DD:&lt;startaddress&gt;,&lt;length&gt; or	- data dword
+'_______________________________________________________
+
+Sub UnAss(File,ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	If IsNumeric(File) Then
+	  	MsgBox "File parameter wrong - " &amp; File
+		Exit Sub 		
+	End If
+	DisASMObj.OutputPath = CStr(File)
+	bRetVal = DisASMObj.CreateStream(True,"UDE Disassembler output of current Program",False)
+	If bRetVal = True Then
+		ParmeterCnt = ParameterObj.ParameterCount
+		If ParmeterCnt = 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		RangeCnt = ParmeterCnt/3
+		ParamIndex = 0
+		For Range = 0 To RangeCnt -1 
+			KindOfRange = CStr(ParameterObj.Parameter(ParamIndex)) 
+			KindOfRange = UCase(KindOfRange)
+			Address = CLng(ParameterObj.Parameter(ParamIndex +1))		
+			Length = CLng(ParameterObj.Parameter(ParamIndex +2))
+			ParamIndex = ParamIndex +3
+			If IsNumeric(KindOfRange) Then
+				If KindOfRange = 12 Then
+ 					DisASMObj.AddRange Address,Length,1
+				ElseIf KindOfRange = 219 Then
+ 					DisASMObj.AddRange Address,Length,2
+				ElseIf KindOfRange = 221 Then
+ 					DisASMObj.AddRange Address,Length,4
+				Else
+	  				MsgBox "Invalid range type " &amp; KindOfRange &amp;  "of range " &amp; Range +1
+					Exit Sub 		
+			 	End If
+			Else
+				If KindOfRange = "C" Then
+ 					DisASMObj.AddRange Address,Length,1
+				ElseIf KindOfRange = "DB" Then
+ 					DisASMObj.AddRange Address,Length,2
+				ElseIf KindOfRange = "DW" Then
+ 					DisASMObj.AddRange Address,Length,3
+				ElseIf KindOfRange = "DD" Then
+ 					DisASMObj.AddRange Address,Length,4
+				Else
+	  				MsgBox "Invalid range type " &amp; KindOfRange &amp;  "of range " &amp; Range +1
+					Exit Sub 		
+				End If
+			End If
+		Next
+		DisASMObj.HexFileModeFlag = False
+		DisASMObj.ListModeFlag = False
+		DisASMObj.WriteAllRanges(False)
+	End If
+
+End Sub
+
+'_______________________________________________________
+'
+'	SaveHEX command line function
+' 
+'	generates intel-HEX file 
+'
+'	command line SaveHex output-file range1 [range2] [range3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub SaveHEX(File,ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	If IsNumeric(File) Then
+	  	MsgBox "File parameter wrong - " &amp; File
+		Exit Sub 		
+	End If
+	DisASMObj.OutputPath = CStr(File)
+	bRetVal = DisASMObj.CreateStream(True,"UDE generated intel-Hex file of current Program",False)
+	If bRetVal = True Then
+		ParmeterCnt = ParameterObj.ParameterCount
+		If ParmeterCnt = 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		If ( ParmeterCnt Mod 2 ) &lt;&gt; 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		RangeCnt = ParmeterCnt/2
+		ParamIndex = 0
+		For Range = 0 To RangeCnt -1 
+			Address = CLng(ParameterObj.Parameter(ParamIndex))		
+			Length = CLng(ParameterObj.Parameter(ParamIndex +1))
+			ParamIndex = ParamIndex +2
+ 			DisASMObj.AddRange Address,Length,0
+		Next
+		DisASMObj.HexFileModeFlag = True
+		DisASMObj.WriteAllRanges(False)
+	End If
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillByte command line function
+' 
+'	fills memory range with byte pattern 
+'
+'	command line FillByte range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillByte(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.ByteArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1))
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillWord command line function
+' 
+'	fills memory range with word pattern 
+'
+'	command line FillWord range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillWord(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.WordArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1)/2)
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillDWord command line function
+' 
+'	fills memory range with dword pattern 
+'
+'	command line FillDWord range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillDWord(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.DWordArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1)/4)
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub</ScriptSource><ScriptArchitecture type="int">63</ScriptArchitecture><ScriptEngine type="string">VBScript</ScriptEngine><MacroFileTime type="string">24.11.2006 14:43:20:000</MacroFileTime><ScriptFromStg type="flag">1</ScriptFromStg><LocalComputerName type="string">WS_CORE_DUO</LocalComputerName><ExternalScriptPath type="string"></ExternalScriptPath><NextNodeName type="string">Macro_27_02_14_13_49_07_0</NextNodeName><UnAss type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute UnAss ..</MenuString><ToolTipString type="string">Macro UnAss</ToolTipString><MessageString type="string">Execute macro UnAss</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">2</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></UnAss><SaveHEX type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute SaveHEX ..</MenuString><ToolTipString type="string">Macro SaveHEX</ToolTipString><MessageString type="string">Execute macro SaveHEX</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">2</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></SaveHEX><FillByte type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillByte ..</MenuString><ToolTipString type="string">Macro FillByte</ToolTipString><MessageString type="string">Execute macro FillByte</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillByte><FillWord type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillWord ..</MenuString><ToolTipString type="string">Macro FillWord</ToolTipString><MessageString type="string">Execute macro FillWord</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillWord><FillDWord type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillDWord ..</MenuString><ToolTipString type="string">Macro FillDWord</ToolTipString><MessageString type="string">Execute macro FillDWord</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillDWord><NoOfFunctions type="int">5</NoOfFunctions></Macro_23_04_13_13_50_43_0></MacroGuiEntries><LastSelectedMacro type="string"></LastSelectedMacro></UDE.Script></AddOns><MultiCoreRunControl type="key"><NoOfRunCtrlGroups type="int">0</NoOfRunCtrlGroups></MultiCoreRunControl><Core type="key"><ViewSrv type="key"><PowerPcCpuWin type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW type="key"><FrameCreated type="string">23.04.2013 11:22:41:993</FrameCreated><ViewSrv type="key"/><NETFrameMode type="int">77827</NETFrameMode><NETFrameSaveIndex type="int">5</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW type="int">0</SAVED_VIEW></PowerPcCpuWin><StdUDESymbolExplWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">23.04.2013 11:22:37:665</FrameCreated><ViewSrv type="key"/><NETFrameMode type="int">77826</NETFrameMode><NETFrameSaveIndex type="int">4</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdUDESymbolExplWin><StdUDEProgWin type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW00 type="key"><FrameCreated type="string">23.04.2013 11:23:07:727</FrameCreated><ViewSrv type="key"/><SourceFile type="string">..\main.c</SourceFile><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">3</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt><SourceFileInstFlag type="int">1</SourceFileInstFlag></OPEN_VIEW00><SAVED_VIEW00 type="int">0</SAVED_VIEW00><OPEN_VIEW01 type="key"><FrameCreated type="string">23.04.2013 13:49:54:009</FrameCreated><ViewSrv type="key"/><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">6</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW01></StdUDEProgWin><StdUDESFRView type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW00 type="key"><FrameCreated type="string">23.04.2013 11:22:28:805</FrameCreated><ViewSrv type="key"><SFRView type="key"><NumberOfBitFieldsPerRow type="bin" size="8">AwAAAA==</NumberOfBitFieldsPerRow><BitfieldValueMode type="bin" size="8">AQAAAA==</BitfieldValueMode><NameWidth type="bin" size="8">kAAAAA==</NameWidth><ValueWidth type="bin" size="8">YAAAAA==</ValueWidth><Bitfield1Width type="bin" size="8">TgAAAA==</Bitfield1Width><Value1Width type="bin" size="8">TgAAAA==</Value1Width><Bitfield2Width type="bin" size="8">TgAAAA==</Bitfield2Width><Value2Width type="bin" size="8">TgAAAA==</Value2Width><Bitfield3Width type="bin" size="8">TgAAAA==</Bitfield3Width><Value3Width type="bin" size="8">TgAAAA==</Value3Width><Bitfield4Width type="bin" size="8">AAAAAA==</Bitfield4Width><Value4Width type="bin" size="8">AAAAAA==</Value4Width><TopIndex type="bin" size="8">AAAAAA==</TopIndex><CaretIndex type="bin" size="8">AAAAAA==</CaretIndex></SFRView></ViewSrv><NETFrameMode type="int">77825</NETFrameMode><NETFrameSaveIndex type="int">2</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW00><SAVED_VIEW00 type="int">0</SAVED_VIEW00><OPEN_VIEW01 type="key"/></StdUDESFRView><StdUDELocalsWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDELocalsWin><StdUDEWatchWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEWatchWin><StdUDESimIOWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDESimIOWin><StdUDEHtmlDocWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEHtmlDocWin><StdUDEGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEGraphWin><StdUDETimeSampleGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDETimeSampleGraphWin><UDEProfilingWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDEProfilingWin><StdUDEMemWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEMemWin><UDEStackWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDEStackWin></ViewSrv><UDE.StdDbgSrv type="key"><INI_SECTION type="key"/><UDE.PowerPcArchSrv type="key"><UDE.PpcJtagTargIntf type="key"><NewWorkspace type="flag">0</NewWorkspace></UDE.PpcJtagTargIntf></UDE.PowerPcArchSrv><UDE.UDESymbol type="key"><DefaultBinFileDir type="string">..\build</DefaultBinFileDir><BinFileDialogParam type="key"><Filter type="int">1</Filter></BinFileDialogParam><BinaryFiles type="key"><Number type="int">1</Number><BinaryFile1 type="key"><FullPath type="string">..\build\ch.elf</FullPath><Breakpoints type="key"><Breakpoint1 type="string">Software;enabled;0;disabled;'main {C:\ChibiStudio\workspace\SPC5\demos\SPC564Axx OS-Less Test Application\main.c} .25';main.c;1;0;;$disabled; ;disabled; ;</Breakpoint1><Number type="int">1</Number></Breakpoints></BinaryFile1><BinaryFile-1 type="key"/></BinaryFiles><MultiCoreLoader type="key"><Number type="int">0</Number></MultiCoreLoader><ExpressionClipboard type="key"><Number type="int">0</Number></ExpressionClipboard></UDE.UDESymbol><STG_ADDON_PROF type="key"><UDE_Graphwin_Trace_AddOn type="key" name="UDE Graphwin Trace AddOn"><LOAD_STATE type="flag">1</LOAD_STATE></UDE_Graphwin_Trace_AddOn><UDELicense_Server type="key" name="UDELicense Server"><LOAD_STATE type="flag">1</LOAD_STATE></UDELicense_Server><UDEMemtool type="key"><LOAD_STATE type="flag">1</LOAD_STATE><FlashMod_PFLASH type="key"/><FlashMod_SHADOWFLASH type="key"/><Frontend type="key"><LastModule type="int">0</LastModule><VerifyProt type="flag">0</VerifyProt><VerifyProtFile type="string">verify.txt</VerifyProtFile><VerifyOnExit type="flag">0</VerifyOnExit><StoreLoadedSections type="flag">0</StoreLoadedSections><AutoStartProgAfterDownload type="flag">0</AutoStartProgAfterDownload><AutoCloseExecCmdDialog type="flag">0</AutoCloseExecCmdDialog><AllowOverwrite type="flag">0</AllowOverwrite></Frontend></UDEMemtool><ADD_ON_DEL_FLAG type="flag">0</ADD_ON_DEL_FLAG></STG_ADDON_PROF><CommQueueHndlStg type="key"><Beep type="flag">0</Beep><Retry type="flag">0</Retry><RetryPeriod type="int">0</RetryPeriod></CommQueueHndlStg><TargetStateHndlStg type="key"/></UDE.StdDbgSrv><MRUSourceFileList type="key"><NoOfMRUSrcFileEntries type="int">1</NoOfMRUSrcFileEntries><MRUSrcFile0 type="string">..\main.c</MRUSrcFile0></MRUSourceFileList></Core><TargetInfoFile type="string">stm_xpc564a_spc564a70_minimodule_debug_jtag.cfg</TargetInfoFile><LastWriteDate type="string">27.02.2014 13:49:06:999</LastWriteDate></stg>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/UDE/stm_xpc564a_spc564a70_minimodule_debug_jtag.cfg b/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/UDE/stm_xpc564a_spc564a70_minimodule_debug_jtag.cfg
new file mode 100644
index 0000000..0925a2e
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/UDE/stm_xpc564a_spc564a70_minimodule_debug_jtag.cfg
@@ -0,0 +1,194 @@
+[Main]
+Signature=UDE_TARGINFO_2.0
+Description=STM XPC564A Mini Module with SPC564A70 (Jtag)
+Description1=MMU preinitialized, memory mapping 1:1, VLE enabled for SRAM and Flash
+Description2=PLL set for 120MHz
+Description3=FLASH programming prepared but not enabled
+Description4=Write Filter for BAM Module
+MCUs=Controller0
+Architecture=PowerPC
+Vendor=STM
+Board=XPC564A Mini Module
+
+[Controller0]
+Family=PowerPC
+Type=SPC564A70
+Enabled=1
+IntClock=120000
+MemDevs=BAMWriteFilter
+ExtClock=8000
+
+[Controller0.Core]
+Protocol=PPCJTAG
+Enabled=1
+
+[Controller0.Core.LoadedAddOn]
+UDEMemtool=1
+
+[Controller0.Core.PpcJtagTargIntf]
+PortType=FTDI
+ResetWaitTime=50
+MaxJtagClk=5000
+DoSramInit=1
+UseNexus=1
+AdaptiveJtagPhaseShift=1
+ConnOption=Default
+ChangeJtagClk=-1
+HaltAfterReset=1
+SimioAddr=g_JtagSimioAccess
+FreezeTimers=1
+InvalidTlbOnReset=1
+InvalidateCache=1
+ForceCacheFlush=1
+IgnoreLockedLines=0
+ExecInitCmds=1
+JtagTapNumber=0
+JtagNumOfTaps=1
+JtagNumIrBefore=0
+JtagNumIrAfter=0
+
+SimioAddr=g_JtagSimioAccess
+
+FlushCache=0
+AllowMmuSetup=1
+UseExtReset=1
+HandleWdtBug=0
+ForceEndOfReset=0
+JtagViaPod=0
+AllowResetOnCheck=0
+ChangeMsr=0
+ChangeMsrValue=0x0
+ExecOnStartCmds=0
+ExecOnHaltCmds=0
+EnableProgramTimeMeasurement=0
+UseHwResetMode=0
+TargetPort=Default
+HandleNexusAccessBug=0
+CommDevSel=PortType=USB,Type=FTDI
+DoNotEnableTrapSwBrp=0
+BootPasswd0=0xFEEDFACE
+BootPasswd1=0xCAFEBEEF
+BootPasswd2=0xFFFFFFFF
+BootPasswd3=0xFFFFFFFF
+BootPasswd4=0xFFFFFFFF
+BootPasswd5=0xFFFFFFFF
+BootPasswd6=0xFFFFFFFF
+BootPasswd7=0xFFFFFFFF
+JtagIoType=Jtag
+ExecOnHaltCmdsWhileHalted=0
+TimerForPTM=Default
+AllowBreakOnUpdateBreakpoints=0
+ClearDebugStatusOnHalt=1
+HwResetMode=Simulate
+UseMasterNexusIfResetState=1
+UseLocalAddressTranslation=1
+Use64BitNexus=0
+InitSramOnlyWhenNotInitialized=0
+AllowHarrForUpdateDebugRegs=0
+DisableE2EECC=0
+UseCore0ForNexusMemoryAccessWhileRunning=0
+
+[Controller0.Core.PpcJtagTargIntf.InitScript]
+
+// select TLB 1
+SETSPR 0x274 0x10000108 0xFFFFFFFF
+
+// programm peripheral B modules
+// TLB 1, entry 0
+SETSPR 0x270 0x10000000 0xFFFFFFFF
+// Valid, protect against invalidation, global entry, size=1MB
+SETSPR 0x271 0xC0000500 0xFFFFFFFF
+// effective page number FFF00000, I,G
+SETSPR 0x272 0xFFF0000A 0xFFFFFFFF
+// real page FFF00000, UX,SX,UW,SW,UR,SR
+SETSPR 0x273 0xFFF0003F 0xFFFFFFFF
+// execute TLB write instruction
+EXECOPCODE 0x7C0007A4
+
+// programm internal Flash, no cache because of flash
+// TLB 1, entry 1
+SETSPR 0x270 0x10010000 0xFFFFFFFF
+// Valid, protect against invalidation, global entry, size=16MB
+SETSPR 0x271 0xC0000700 0xFFFFFFFF
+// effective page number 00000000
+SETSPR 0x272 0x28 0xFFFFFFFF
+// real page 00000000, UX,SX,UW,SW,UR,SR
+SETSPR 0x273 0x3F 0xFFFFFFFF
+// execute TLB write instruction
+EXECOPCODE 0x7C0007A4
+
+// programm external memory
+// TLB 1, entry 2
+SETSPR 0x270 0x10020000 0xFFFFFFFF
+// Valid, protect against invalidation, global entry, size=16MB
+SETSPR 0x271 0xC0000700 0xFFFFFFFF
+// effective page number 20000000
+SETSPR 0x272 0x20000020 0xFFFFFFFF
+// real page 20000000, UX,SX,UW,SW,UR,SR
+SETSPR 0x273 0x2000003F 0xFFFFFFFF
+// execute TLB write instruction
+EXECOPCODE 0x7C0007A4
+
+// programm internal SRAM
+// TLB 1, entry 3
+SETSPR 0x270 0x10030000 0xFFFFFFFF
+// Valid, protect against invalidation, global entry, size=256k
+SETSPR 0x271 0xC0000400 0xFFFFFFFF
+// effective page number 40000000, I
+SETSPR 0x272 0x40000028 0xFFFFFFFF
+// real page 0x40000028, UX,SX,UW,SW,UR,SR
+SETSPR 0x273 0x4000003F 0xFFFFFFFF
+// execute TLB write instruction
+EXECOPCODE 0x7C0007A4
+
+// programm peripheral A modules
+// TLB 1, entry 4
+SETSPR 0x270 0x10040000 0xFFFFFFFF
+// Valid, protect against invalidation, global entry, size=1MB
+SETSPR 0x271 0xC0000500 0xFFFFFFFF
+// effective page number C3F00000, I
+SETSPR 0x272 0xC3F0000A 0xFFFFFFFF
+// real page C3F00000, UX,SX,UW,SW,UR,SR
+SETSPR 0x273 0xC3F0003F 0xFFFFFFFF
+// execute TLB write instruction
+EXECOPCODE 0x7C0007A4
+
+// cache invalidate
+SETSPR 0x3F3 0x00000003 0x00000003
+SETSPR 0x3F3 0x00000000 0x00000003
+
+// setup IVOPR
+// points to internal memory at 0x40000000
+SETSPR 0x3F 0x40000000 0xFFFFFFFF
+
+// disable watchdog
+SET SWT_SR 0x0000C520
+SET SWT_SR 0x0000D928
+SET SWT_MCR 0xFF00000A
+
+// setup clock to 120MHz
+SET 0xC3F80008 0xF000003C 0xF00F00FF
+WAIT 0x2
+SET 0xC3F8000C 0x00000001 0x000000FF
+WAIT 0x5
+
+[Controller0.Core.PpcJtagTargIntf.OnStartScript]
+
+[Controller0.Core.PpcJtagTargIntf.OnHaltScript]
+
+[Controller0.BAMWriteFilter]
+Description=BAM WriteAccess Filter
+Range0Start=0xFFFFC000
+Range0Size=0x4000
+Enabled=1
+Handler=AccessFilter
+Mode=ReadOnly
+
+[Controller0.PFLASH]
+Enabled=1
+EnableMemtoolByDefault=1
+
+[Controller0.Core.DebugServer.DbgFramework]
+FRAMEWORK_COLOR=14804223
+[Controller0.EngineA.DebugServer.DbgFramework]
+FRAMEWORK_COLOR=14794944
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/chconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/chconf.h
new file mode 100644
index 0000000..f6244ad
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/halconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/halconf.h
new file mode 100644
index 0000000..6827953
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/halconf.h
@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM                  FALSE
+#endif
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/main.c b/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/main.c
new file mode 100644
index 0000000..ab881fd
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/main.c
@@ -0,0 +1,185 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+#include "shell.h"
+#include "chprintf.h"
+
+#define SHELL_WA_SIZE   THD_WORKING_AREA_SIZE(1024)
+#define TEST_WA_SIZE    THD_WORKING_AREA_SIZE(256)
+
+static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
+  size_t n, size;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: mem\r\n");
+    return;
+  }
+  n = chHeapStatus(NULL, &size);
+  chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX());
+  chprintf(chp, "heap fragments   : %u\r\n", n);
+  chprintf(chp, "heap free total  : %u bytes\r\n", size);
+}
+
+static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
+  static const char *states[] = {CH_STATE_NAMES};
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: threads\r\n");
+    return;
+  }
+  chprintf(chp, "    addr    stack prio refs     state time\r\n");
+  tp = chRegFirstThread();
+  do {
+    chprintf(chp, "%08lx %08lx %4lu %4lu %9s\r\n",
+            (uint32_t)tp, (uint32_t)tp->p_ctx.sp,
+            (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
+            states[tp->p_state]);
+    tp = chRegNextThread(tp);
+  } while (tp != NULL);
+}
+
+static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: test\r\n");
+    return;
+  }
+  tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(),
+                           TestThread, chp);
+  if (tp == NULL) {
+    chprintf(chp, "out of memory\r\n");
+    return;
+  }
+  chThdWait(tp);
+}
+
+static const ShellCommand commands[] = {
+  {"mem", cmd_mem},
+  {"threads", cmd_threads},
+  {"test", cmd_test},
+  {NULL, NULL}
+};
+
+static const ShellConfig shell_cfg1 = {
+  (BaseSequentialStream *)&SD1,
+  commands
+};
+
+/*
+ * LEDs blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+
+  while (true) {
+    unsigned i;
+
+    for (i = 0; i < 4; i++) {
+      palClearPad(PORT11, P11_LED1);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT11, P11_LED2);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT11, P11_LED3);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT11, P11_LED4);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT11, P11_LED1);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT11, P11_LED2);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT11, P11_LED3);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT11, P11_LED4);
+      chThdSleepMilliseconds(300);
+    }
+
+    for (i = 0; i < 4; i++) {
+      palTogglePad(PORT11, P11_LED1);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT11, P11_LED1);
+      palTogglePad(PORT11, P11_LED2);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT11, P11_LED2);
+      palTogglePad(PORT11, P11_LED3);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT11, P11_LED3);
+      palTogglePad(PORT11, P11_LED4);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT11, P11_LED4);
+    }
+
+    palSetPort(PORT11,
+               PAL_PORT_BIT(P11_LED1) | PAL_PORT_BIT(P11_LED2) |
+               PAL_PORT_BIT(P11_LED3) | PAL_PORT_BIT(P11_LED4));
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+  thread_t *shelltp = NULL;
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Shell manager initialization.
+   */
+  shellInit();
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   */
+  sdStart(&SD1, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity.
+   */
+  while (true) {
+    if (!shelltp)
+      shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
+    else if (chThdTerminatedX(shelltp)) {
+      chThdRelease(shelltp);    /* Recovers memory of the previous shell.   */
+      shelltp = NULL;           /* Triggers spawning of a new shell.        */
+    }
+    chThdSleepMilliseconds(1000);
+  }
+  return 0;
+}
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/mcuconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/mcuconf.h
new file mode 100644
index 0000000..9094394
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC564A-EVB/mcuconf.h
@@ -0,0 +1,188 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * SPC564Axx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 1...15       Lowest...Highest.
+ * DMA priorities:
+ * 0...15       Highest...Lowest.
+ */
+
+#define SPC564Axx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define SPC5_NO_INIT                        FALSE
+#define SPC5_CLK_BYPASS                     FALSE
+#define SPC5_ALLOW_OVERCLOCK                FALSE
+#define SPC5_CLK_PREDIV_VALUE               2
+#define SPC5_CLK_MFD_VALUE                  75
+#define SPC5_CLK_RFD                        SPC5_RFD_DIV2
+#define SPC5_FLASH_BIUCR                    (BIUCR_BANK1_TOO |              \
+                                             BIUCR_MASTER4_PREFETCH |       \
+                                             BIUCR_MASTER0_PREFETCH |       \
+                                             BIUCR_DPFEN |                  \
+                                             BIUCR_IPFEN |                  \
+                                             BIUCR_PFLIM_ON_MISS |          \
+                                             BIUCR_BFEN)
+#define SPC5_EMIOS_GPRE_VALUE               20
+
+/*
+ * EDMA driver settings.
+ */
+#define SPC5_EDMA_CR_SETTING                (EDMA_CR_GRP3PRI(3) |           \
+                                             EDMA_CR_GRP2PRI(2) |           \
+                                             EDMA_CR_GRP1PRI(1) |           \
+                                             EDMA_CR_GRP0PRI(0) |           \
+                                             EDMA_CR_EMLM       |           \
+                                             EDMA_CR_ERGA)
+#define SPC5_EDMA_GROUP0_PRIORITIES         0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+#define SPC5_EDMA_GROUP1_PRIORITIES         0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+#define SPC5_EDMA_GROUP2_PRIORITIES         0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+#define SPC5_EDMA_GROUP3_PRIORITIES         0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+#define SPC5_EDMA_ERROR_IRQ_PRIO            12
+#define SPC5_EDMA_ERROR_HANDLER()           osalSysHalt("DMA failure")
+
+/*
+ * ADC driver settings.
+ */
+#define SPC5_ADC_USE_ADC0_Q0                FALSE
+#define SPC5_ADC_USE_ADC0_Q1                FALSE
+#define SPC5_ADC_USE_ADC0_Q2                FALSE
+#define SPC5_ADC_USE_ADC1_Q3                FALSE
+#define SPC5_ADC_USE_ADC1_Q4                FALSE
+#define SPC5_ADC_USE_ADC1_Q5                FALSE
+#define SPC5_ADC_FIFO0_DMA_IRQ_PRIO         12
+#define SPC5_ADC_FIFO1_DMA_IRQ_PRIO         12
+#define SPC5_ADC_FIFO2_DMA_IRQ_PRIO         12
+#define SPC5_ADC_FIFO3_DMA_IRQ_PRIO         12
+#define SPC5_ADC_FIFO4_DMA_IRQ_PRIO         12
+#define SPC5_ADC_FIFO5_DMA_IRQ_PRIO         12
+#define SPC5_ADC_CR_CLK_PS                  ADC_CR_CLK_PS(5)
+#define SPC5_ADC_PUDCR                      {ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE,ADC_PUDCR_NONE}
+
+/*
+ * SERIAL driver system settings.
+ */
+#define SPC5_USE_ESCIA                      TRUE
+#define SPC5_USE_ESCIB                      FALSE
+#define SPC5_USE_ESCIC                      FALSE
+#define SPC5_ESCIA_PRIORITY                 8
+#define SPC5_ESCIB_PRIORITY                 8
+#define SPC5_ESCIC_PRIORITY                 8
+
+/*
+ * SPI driver system settings.
+ */
+#define SPC5_SPI_USE_DSPI1                  FALSE
+#define SPC5_SPI_USE_DSPI2                  FALSE
+#define SPC5_SPI_USE_DSPI3                  FALSE
+#define SPC5_SPI_DMA_MODE                   SPC5_SPI_DMA_RX_ONLY
+#define SPC5_SPI_DSPI1_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3 | SPC5_MCR_PCSIS4 | SPC5_MCR_PCSIS5 | SPC5_MCR_PCSIS6 | SPC5_MCR_PCSIS7)
+#define SPC5_SPI_DSPI2_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3 | SPC5_MCR_PCSIS4 | SPC5_MCR_PCSIS5 | SPC5_MCR_PCSIS6 | SPC5_MCR_PCSIS7)
+#define SPC5_SPI_DSPI3_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3 | SPC5_MCR_PCSIS4 | SPC5_MCR_PCSIS5 | SPC5_MCR_PCSIS6 | SPC5_MCR_PCSIS7)
+#define SPC5_SPI_DSPI1_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI2_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI3_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI1_IRQ_PRIO             10
+#define SPC5_SPI_DSPI2_IRQ_PRIO             10
+#define SPC5_SPI_DSPI3_IRQ_PRIO             10
+#define SPC5_SPI_DMA_ERROR_HOOK(spip)       osalSysHalt("DSPI DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define SPC5_ICU_USE_EMIOS_CH1              FALSE
+#define SPC5_ICU_USE_EMIOS_CH2              FALSE
+#define SPC5_ICU_USE_EMIOS_CH3              FALSE
+#define SPC5_ICU_USE_EMIOS_CH4              FALSE
+#define SPC5_ICU_USE_EMIOS_CH5              FALSE
+#define SPC5_ICU_USE_EMIOS_CH6              FALSE
+#define SPC5_ICU_USE_EMIOS_CH11             FALSE
+#define SPC5_ICU_USE_EMIOS_CH13             FALSE
+#define SPC5_ICU_USE_EMIOS_CH7              FALSE
+#define SPC5_ICU_USE_EMIOS_CH16             FALSE
+#define SPC5_ICU_USE_EMIOS_CH17             FALSE
+#define SPC5_ICU_USE_EMIOS_CH18             FALSE
+#define SPC5_EMIOS_FLAG_F1_PRIORITY         8
+#define SPC5_EMIOS_FLAG_F2_PRIORITY         8
+#define SPC5_EMIOS_FLAG_F3_PRIORITY         8
+#define SPC5_EMIOS_FLAG_F4_PRIORITY         8
+#define SPC5_EMIOS_FLAG_F5_PRIORITY         8
+#define SPC5_EMIOS_FLAG_F6_PRIORITY         8
+#define SPC5_EMIOS_FLAG_F11_PRIORITY        8
+#define SPC5_EMIOS_FLAG_F13_PRIORITY        8
+#define SPC5_EMIOS_FLAG_F7_PRIORITY         8
+#define SPC5_EMIOS_FLAG_F16_PRIORITY        8
+#define SPC5_EMIOS_FLAG_F17_PRIORITY        8
+#define SPC5_EMIOS_FLAG_F18_PRIORITY        8
+
+/*
+ * PWM driver system settings.
+ */
+#define SPC5_PWM_USE_EMIOS_CH0              FALSE
+#define SPC5_PWM_USE_EMIOS_CH8              FALSE
+#define SPC5_PWM_USE_EMIOS_CH9              FALSE
+#define SPC5_PWM_USE_EMIOS_CH10             FALSE
+#define SPC5_PWM_USE_EMIOS_CH12             FALSE
+#define SPC5_PWM_USE_EMIOS_CH14             FALSE
+#define SPC5_PWM_USE_EMIOS_CH15             FALSE
+#define SPC5_PWM_USE_EMIOS_CH23             FALSE
+#define SPC5_PWM_USE_EMIOS_CH19             FALSE
+#define SPC5_PWM_USE_EMIOS_CH20             FALSE
+#define SPC5_PWM_USE_EMIOS_CH21             FALSE
+#define SPC5_PWM_USE_EMIOS_CH22             FALSE
+#define SPC5_EMIOS_FLAG_F0_PRIORITY         8
+#define SPC5_EMIOS_FLAG_F8_PRIORITY         8
+#define SPC5_EMIOS_FLAG_F9_PRIORITY         8
+#define SPC5_EMIOS_FLAG_F10_PRIORITY        8
+#define SPC5_EMIOS_FLAG_F12_PRIORITY        8
+#define SPC5_EMIOS_FLAG_F14_PRIORITY        8
+#define SPC5_EMIOS_FLAG_F15_PRIORITY        8
+#define SPC5_EMIOS_FLAG_F23_PRIORITY        8
+#define SPC5_EMIOS_FLAG_F19_PRIORITY        8
+#define SPC5_EMIOS_FLAG_F20_PRIORITY        8
+#define SPC5_EMIOS_FLAG_F21_PRIORITY        8
+#define SPC5_EMIOS_FLAG_F22_PRIORITY        8
+
+/*
+ * CAN driver system settings.
+ */
+#define SPC5_CAN_USE_FILTERS                FALSE
+
+#define SPC5_CAN_USE_FLEXCAN0               FALSE
+#define SPC5_CAN_FLEXCAN0_USE_EXT_CLK       FALSE
+#define SPC5_CAN_FLEXCAN0_IRQ_PRIORITY      11
+
+#define SPC5_CAN_USE_FLEXCAN1               FALSE
+#define SPC5_CAN_FLEXCAN1_USE_EXT_CLK       FALSE
+#define SPC5_CAN_FLEXCAN1_IRQ_PRIORITY      11
+
+#define SPC5_CAN_USE_FLEXCAN2               FALSE
+#define SPC5_CAN_FLEXCAN2_USE_EXT_CLK       FALSE
+#define SPC5_CAN_FLEXCAN2_IRQ_PRIORITY      11
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/.cproject b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/.cproject
new file mode 100644
index 0000000..dfc5a6a
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/.cproject
@@ -0,0 +1,57 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.665946016">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.665946016" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.665946016" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.665946016." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1131493307" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1131493307.1844928918" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1106552272" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1064008669" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.2048166271" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1577341141" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.841305605" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.954135725" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.287919901" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1061591135" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-SPC56EC-EVB.null.2129661677" name="RT-SPC56EC-EVB"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.665946016">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-SPC56EC-EVB"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/.project b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/.project
new file mode 100644
index 0000000..4eee5e2
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-SPC56EC-EVB</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_EVB_SPC56EC</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/Makefile b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/Makefile
new file mode 100644
index 0000000..bacf31a
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/Makefile
@@ -0,0 +1,188 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data.
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT =
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = no
+endif
+
+# If enabled, this option allows to compile the application in VLE mode.
+ifeq ($(USE_VLE),)
+  USE_VLE = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the optional exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/e200/compilers/GCC/mk/startup_spc56ecxx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/boards/ST_EVB_SPC56EC/board.mk
+include $(CHIBIOS)/os/hal/ports/SPC5/SPC56ECxx/platform.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/e200/compilers/GCC/mk/port.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/SPC56EC74.ld
+
+# C sources here.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       $(CHIBIOS)/os/hal/lib/streams/memstreams.c \
+       $(CHIBIOS)/os/hal/lib/streams/chprintf.c \
+       $(CHIBIOS)/os/various/shell.c \
+       main.c
+
+# C++ sources here.
+CPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+#MCU  = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames
+MCU  = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames
+
+#TRGT = powerpc-eabi-
+TRGT = ppc-vle-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+MOT  = $(CP) -O srec
+BIN  = $(CP) -O binary
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS = -DSPC56ECXX_FMPLL_CLOCK_ERRATA_WORKAROUND=0
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/e200/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/UDE/debug.wsx b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/UDE/debug.wsx
new file mode 100644
index 0000000..df26ace
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/UDE/debug.wsx
@@ -0,0 +1,273 @@
+<?xml version="1.0" encoding="ISO-8859-1"?>
+<stg format="2.0">
+	<OriginalWsp type="string">debug.wsx</OriginalWsp><BackupWspFlag type="flag">0</BackupWspFlag><UseWspCnt type="int">0</UseWspCnt><WspCloseCnt type="int">0</WspCloseCnt><ProdInfo type="bin" size="52">vQTv/gAAAQAXAAIA8QkPAAAABAAAAAAAPwAAAAAAAAAEAAAAAgAAAAAAAAAAAAAAAAAAAA==</ProdInfo><ProdInfoString type="string">4.0</ProdInfoString><CreationDate type="string">28.08.2013 14:58:49:999</CreationDate><MainFrame type="key"><VisibilityGroupsMgr type="key"><Core0 type="key"><UsePrimaryGroup type="flag">0</UsePrimaryGroup><UseLastUsedGroup type="flag">0</UseLastUsedGroup></Core0><Core1 type="key"><UsePrimaryGroup type="flag">0</UsePrimaryGroup><UseLastUsedGroup type="flag">0</UseLastUsedGroup></Core1><EnableVisibilityGroups type="flag">0</EnableVisibilityGroups><VisibilityGroup_1 type="key"><NoOfDebugger type="int">0</NoOfDebugger><DefaultGroupName type="string">WorkspaceManager</DefaultGroupName><GroupName type="string">WorkspaceManager</GroupName><PrimaryGroup type="flag">0</PrimaryGroup><CommonGroup type="flag">1</CommonGroup></VisibilityGroup_1><VisibilityGroup_2 type="key"><Debugger_1 type="string">Core0</Debugger_1><NoOfDebugger type="int">1</NoOfDebugger><DefaultGroupName type="string">Target0.Controller0.Core0</DefaultGroupName><GroupName type="string">Target0.Controller0.Core0</GroupName><PrimaryGroup type="flag">1</PrimaryGroup><CommonGroup type="flag">0</CommonGroup></VisibilityGroup_2><VisibilityGroup_3 type="key"><Debugger_1 type="string">Core1</Debugger_1><NoOfDebugger type="int">1</NoOfDebugger><DefaultGroupName type="string">Target0.Controller0.Core1</DefaultGroupName><GroupName type="string">Target0.Controller0.Core1</GroupName><PrimaryGroup type="flag">1</PrimaryGroup><CommonGroup type="flag">0</CommonGroup></VisibilityGroup_3><NoOfDefaultVisibilityGroups type="int">3</NoOfDefaultVisibilityGroups><NoOfVisibilityGroups type="int">3</NoOfVisibilityGroups><EnableUserSwitchOfVisibilityGroups type="flag">0</EnableUserSwitchOfVisibilityGroups><EnableDebuggerSwitchOfVisibilityGroups type="flag">0</EnableDebuggerSwitchOfVisibilityGroups><VisibilityGroupsCtrlTBCat type="int">7</VisibilityGroupsCtrlTBCat></VisibilityGroupsMgr><NETPlacementRoot type="key"><FormsData type="innerxml"><FormsData><Bounds><X>63</X><Y>21</Y><Width>1296</Width><Height>818</Height></Bounds><ClientSize><Width>1280</Width><Height>780</Height></ClientSize><State>Normal</State></FormsData></FormsData><DockingManagerControlData type="innerxml"><DockingManagerControlData><MDIActive>false</MDIActive><DocumentDockStyle>Top</DocumentDockStyle><DockingControls><DockingControlData><DockedDimension>1272</DockedDimension><Cancelled>false</Cancelled><DockingType>Bottom</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>true</Selected></DockingControlData><DockingControlData><DockedDimension>457</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>457</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>1</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>0</DockedDimension><Cancelled>false</Cancelled><DockingType>Top</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>2</DockingIndex><PanelIndex>-1</PanelIndex><ContainerType>TabbedDocument</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>457</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>3</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>true</Selected></DockingControlData><DockingControlData><DockedDimension>457</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>2</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>457</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>4</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>0</DockedDimension><Cancelled>false</Cancelled><DockingType>Top</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>1</DockingIndex><PanelIndex>-1</PanelIndex><ContainerType>TabbedDocument</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>0</DockedDimension><Cancelled>false</Cancelled><DockingType>Top</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>-1</PanelIndex><ContainerType>TabbedDocument</ContainerType><Selected>true</Selected></DockingControlData></DockingControls><LeftDockingContainerControlData><DockingContainerControlData><Tabbed>true</Tabbed><Dimension>632</Dimension></DockingContainerControlData></LeftDockingContainerControlData><RightDockingContainerControlData><DockingContainerControlData><Tabbed>false</Tabbed><Dimension>200</Dimension></DockingContainerControlData></RightDockingContainerControlData><TopDockingContainerControlData><DockingContainerControlData><Tabbed>false</Tabbed><Dimension>200</Dimension></DockingContainerControlData></TopDockingContainerControlData><BottomDockingContainerControlData><DockingContainerControlData><Tabbed>true</Tabbed><Dimension>200</Dimension></DockingContainerControlData></BottomDockingContainerControlData><TabbedDocumentContainerControlData><TabbedDocumentContainerControlData><Selected>true</Selected><SplitterSize>100</SplitterSize></TabbedDocumentContainerControlData></TabbedDocumentContainerControlData></DockingManagerControlData></DockingManagerControlData><ToolbarControlData type="innerxml"><ToolbarControlData><ShowPanelShortcuts>true</ShowPanelShortcuts><ShowToolItemMessages>true</ShowToolItemMessages><TopContainer><PanelBounds><X>0</X><Y>0</Y><Width>1280</Width><Height>74</Height></PanelBounds><ToolBars><ToolbarPersistData><Bounds><X>0</X><Y>0</Y><Width>1280</Width><Height>24</Height></Bounds><Name>Platform Main Menu</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>3</X><Y>24</Y><Width>276</Width><Height>25</Height></Bounds><Name>Macro Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x3B_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Run Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x40_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Debug Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Break Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3C_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Reload Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Ctrl_{4D5190CD-077D-4F92-B890-4545242BF32A}_UDEWorkspace</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>279</X><Y>24</Y><Width>141</Width><Height>25</Height></Bounds><Name>Config Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x3_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Target Configuration</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xFE_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Connect Target</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x100_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Disconnect Target</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x6_{1C85B31A-5D25-4197-9635-9C5DC28EAFD7}</Name><Visible>true</Visible><Text>Setup Target Interface</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x12_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>MCU Run Control</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>420</X><Y>24</Y><Width>259</Width><Height>25</Height></Bounds><Name>Tools Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Ctrl_{377CE046-823C-4A05-8828-13C25D345D77}_Core0</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xE1_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Execution Time Setup</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Ctrl_{377CE046-823C-4A05-8828-13C25D345D77}_Core1</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>679</X><Y>24</Y><Width>95</Width><Height>25</Height></Bounds><Name>Edit Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Workspace_0x1779</Name><Visible>true</Visible><Text>Cut</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177A</Name><Visible>true</Visible><Text>Copy</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177B</Name><Visible>true</Visible><Text>Paste</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>774</X><Y>24</Y><Width>49</Width><Height>25</Height></Bounds><Name>File Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Workspace_0x1770</Name><Visible>true</Visible><Text>New Workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1771</Name><Visible>false</Visible><Text>Open workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1772</Name><Visible>false</Visible><Text>Save workspace as</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1773</Name><Visible>false</Visible><Text>Save workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1774</Name><Visible>false</Visible><Text>Close workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177F</Name><Visible>false</Visible><Text>Export view content</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1778</Name><Visible>false</Visible><Text>Print</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>false</Visible><Text>Load Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>823</X><Y>24</Y><Width>440</Width><Height>25</Height></Bounds><Name>Views Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x4_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Target Browser</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x15_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Diagnostic Message Viewer</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xF_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Console</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x0_{DED51A60-E0B7-11D4-9112-0001034962B6}</Name><Visible>true</Visible><Text>CPU Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1E_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Explore Symbols</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5C_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Single Program Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5A_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Disassembly Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x2D_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show Special Function Register</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3C_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Locals</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x46_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Watch</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Simulated I/O</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x14_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>UDE HTML</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x19_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Array Chart</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1B_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Time Traced Signal Chart</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x50_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>IP Trace Profiling</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x28_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Memory</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x46_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Call Stack</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>3</X><Y>49</Y><Width>492</Width><Height>25</Height></Bounds><Name>Debug Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x18_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show IP</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5E_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show program code</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x7_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Start Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x9_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Over</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Into</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xB_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Out</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x8_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Run Cursor</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x321_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Break Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xD_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Reset</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xC_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Restart Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Breakpoints</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x6_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Toggle Break</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Ctrl_{FB7BC773-88A4-4ECE-B9B6-7189610B0735}_Core0</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{1C85B31A-5D25-4197-9635-9C5DC28EAFD7}</Name><Visible>false</Visible><Text>Trigger setup</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Ctrl_{FB7BC773-88A4-4ECE-B9B6-7189610B0735}_Core1</Name><Visible>false</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>100</Y><Width>26</Width><Height>25</Height></Bounds><Name>Show Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>200</Y><Width>26</Width><Height>25</Height></Bounds><Name>Window Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>225</Y><Width>26</Width><Height>25</Height></Bounds><Name>Workspace Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>275</Y><Width>26</Width><Height>25</Height></Bounds><Name>Help Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData></ToolBars></TopContainer><BottomContainer><PanelBounds><X>0</X><Y>757</Y><Width>1280</Width><Height>23</Height></PanelBounds><ToolBars><ToolbarPersistData><Bounds><X>0</X><Y>0</Y><Width>1280</Width><Height>23</Height></Bounds><Name>Platform Status Bar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData/></ToolbarPersistData></ToolBars></BottomContainer><LeftContainer><PanelBounds><X>0</X><Y>74</Y><Width>0</Width><Height>683</Height></PanelBounds><ToolBars/></LeftContainer><RightContainer><PanelBounds><X>1280</X><Y>74</Y><Width>0</Width><Height>683</Height></PanelBounds><ToolBars/></RightContainer></ToolbarControlData></ToolbarControlData></NETPlacementRoot><StdTargetManagerWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">28.08.2013 15:00:07:145</FrameCreated><ViewSrv type="key"><TargetBrowserView type="key"><SplitterRatio type="int">100</SplitterRatio></TargetBrowserView></ViewSrv><NETFrameMode type="int">77824</NETFrameMode><NETFrameSaveIndex type="int">1</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">1</CommonVisibilityGroup><VisibilityGroup_1 type="string">WorkspaceManager</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdTargetManagerWin><StdUDEMessageWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">28.08.2013 15:00:07:129</FrameCreated><ViewSrv type="key"><LogWin type="key"><Index type="key"><Width type="bin" size="8">MgAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Index><Type type="key"><Width type="bin" size="8">ZAAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Type><Time type="key"><Width type="bin" size="8">ZAAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Time><Src type="key"><Width type="bin" size="8">lgAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Src><Msg type="key"><Width type="bin" size="8">6AMAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Msg></LogWin><CmdWin type="key"><History type="key"/></CmdWin></ViewSrv><NETFrameMode type="int">90112</NETFrameMode><NETFrameSaveIndex type="int">0</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">1</CommonVisibilityGroup><VisibilityGroup_1 type="string">WorkspaceManager</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdUDEMessageWin><StdUDECmdWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDECmdWin><UDETraceWin2 type="key"/><StdUDEWspHTMLView type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEWspHTMLView><SelectedPrinter type="string">\\napnt002.nap.st.com\NAPPRT0001</SelectedPrinter><TraceFramework type="key"/></MainFrame><INI_SECTION type="key"><Macro type="key"><MacroLib type="string">..\..\..\..\..\..\Program Files (x86)\pls\UDE 4.0\StdLibrary.mso</MacroLib></Macro><PLACEMENT type="key"><MULTICORELOADERDLG type="string">416,1097,367,613</MULTICORELOADERDLG><SFRSelectDlg type="string">620,965,340,662</SFRSelectDlg></PLACEMENT><EXTRAVALUE type="key"><MULTICORELOADERDLG type="int">0</MULTICORELOADERDLG><SFRSelectDlg type="int">0</SFRSelectDlg></EXTRAVALUE><Loader type="key"><LOADER_REGKEY_WSP type="string">{866f82d3-fac5-43cd-8a82-0af01e46e2c5}</LOADER_REGKEY_WSP></Loader></INI_SECTION><AddOns type="key"><UDE.Script type="key"><MacroGuiEntries type="key"><LastScriptFilePath type="string">..\..\..\..\..\..\Users\disiriog\Documents\pls\UDE 4.0</LastScriptFilePath><Macro_24_09_13_12_19_33_0 type="key"><ScriptDescription type="string">The script contains a collection of macros to save memory content into different file formats 
+and fill target memory ranges</ScriptDescription><ScriptPath type="string">V:\UDE\AddOns\Macro\MacroLibrary\StdMacros1.dsm</ScriptPath><ScriptSource type="string">'	
+'	$Header: /Ude/AddOns/Macro/MacroLibrary/StdMacros.dsm 3     30.04.04 9:34 Weisses $
+'_______________________________________________________
+'
+'	universal debug engine
+'	 
+'	Standard command line macros - part 1 
+'
+'	pls Development Tools 1999-2004
+'
+'   28.04.04    SW     correction for UDE 1.10
+'   03.06.03    SW     initial version
+'_______________________________________________________
+
+'_______________________________________________________
+'
+'	UnAss command line function
+' 
+'	generates disassembly file 
+'
+'	command line UnAss output-file range1 [range2] [range3] .....
+'	range description:
+'		C:&lt;startaddress&gt;,&lt;length&gt; or	- code
+'		DB:&lt;startaddress&gt;,&lt;length&gt; or	- data byte
+'		DW:&lt;startaddress&gt;,&lt;length&gt; or	- data word
+'		DD:&lt;startaddress&gt;,&lt;length&gt; or	- data dword
+'_______________________________________________________
+
+Sub UnAss(File,ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	If IsNumeric(File) Then
+	  	MsgBox "File parameter wrong - " &amp; File
+		Exit Sub 		
+	End If
+	DisASMObj.OutputPath = CStr(File)
+	bRetVal = DisASMObj.CreateStream(True,"UDE Disassembler output of current Program",False)
+	If bRetVal = True Then
+		ParmeterCnt = ParameterObj.ParameterCount
+		If ParmeterCnt = 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		RangeCnt = ParmeterCnt/3
+		ParamIndex = 0
+		For Range = 0 To RangeCnt -1 
+			KindOfRange = CStr(ParameterObj.Parameter(ParamIndex)) 
+			KindOfRange = UCase(KindOfRange)
+			Address = CLng(ParameterObj.Parameter(ParamIndex +1))		
+			Length = CLng(ParameterObj.Parameter(ParamIndex +2))
+			ParamIndex = ParamIndex +3
+			If IsNumeric(KindOfRange) Then
+				If KindOfRange = 12 Then
+ 					DisASMObj.AddRange Address,Length,1
+				ElseIf KindOfRange = 219 Then
+ 					DisASMObj.AddRange Address,Length,2
+				ElseIf KindOfRange = 221 Then
+ 					DisASMObj.AddRange Address,Length,4
+				Else
+	  				MsgBox "Invalid range type " &amp; KindOfRange &amp;  "of range " &amp; Range +1
+					Exit Sub 		
+			 	End If
+			Else
+				If KindOfRange = "C" Then
+ 					DisASMObj.AddRange Address,Length,1
+				ElseIf KindOfRange = "DB" Then
+ 					DisASMObj.AddRange Address,Length,2
+				ElseIf KindOfRange = "DW" Then
+ 					DisASMObj.AddRange Address,Length,3
+				ElseIf KindOfRange = "DD" Then
+ 					DisASMObj.AddRange Address,Length,4
+				Else
+	  				MsgBox "Invalid range type " &amp; KindOfRange &amp;  "of range " &amp; Range +1
+					Exit Sub 		
+				End If
+			End If
+		Next
+		DisASMObj.HexFileModeFlag = False
+		DisASMObj.ListModeFlag = False
+		DisASMObj.WriteAllRanges(False)
+	End If
+
+End Sub
+
+'_______________________________________________________
+'
+'	SaveHEX command line function
+' 
+'	generates intel-HEX file 
+'
+'	command line SaveHex output-file range1 [range2] [range3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub SaveHEX(File,ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	If IsNumeric(File) Then
+	  	MsgBox "File parameter wrong - " &amp; File
+		Exit Sub 		
+	End If
+	DisASMObj.OutputPath = CStr(File)
+	bRetVal = DisASMObj.CreateStream(True,"UDE generated intel-Hex file of current Program",False)
+	If bRetVal = True Then
+		ParmeterCnt = ParameterObj.ParameterCount
+		If ParmeterCnt = 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		If ( ParmeterCnt Mod 2 ) &lt;&gt; 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		RangeCnt = ParmeterCnt/2
+		ParamIndex = 0
+		For Range = 0 To RangeCnt -1 
+			Address = CLng(ParameterObj.Parameter(ParamIndex))		
+			Length = CLng(ParameterObj.Parameter(ParamIndex +1))
+			ParamIndex = ParamIndex +2
+ 			DisASMObj.AddRange Address,Length,0
+		Next
+		DisASMObj.HexFileModeFlag = True
+		DisASMObj.WriteAllRanges(False)
+	End If
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillByte command line function
+' 
+'	fills memory range with byte pattern 
+'
+'	command line FillByte range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillByte(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.ByteArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1))
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillWord command line function
+' 
+'	fills memory range with word pattern 
+'
+'	command line FillWord range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillWord(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.WordArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1)/2)
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillDWord command line function
+' 
+'	fills memory range with dword pattern 
+'
+'	command line FillDWord range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillDWord(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.DWordArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1)/4)
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub</ScriptSource><ScriptArchitecture type="int">63</ScriptArchitecture><ScriptEngine type="string">VBScript</ScriptEngine><MacroFileTime type="string">24.11.2006 14:43:20:000</MacroFileTime><ScriptFromStg type="flag">1</ScriptFromStg><LocalComputerName type="string">WS_CORE_DUO</LocalComputerName><ExternalScriptPath type="string"></ExternalScriptPath><NextNodeName type="string">Macro_24_02_14_14_13_33_0</NextNodeName><UnAss type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute UnAss ..</MenuString><ToolTipString type="string">Macro UnAss</ToolTipString><MessageString type="string">Execute macro UnAss</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">2</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></UnAss><SaveHEX type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute SaveHEX ..</MenuString><ToolTipString type="string">Macro SaveHEX</ToolTipString><MessageString type="string">Execute macro SaveHEX</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">2</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></SaveHEX><FillByte type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillByte ..</MenuString><ToolTipString type="string">Macro FillByte</ToolTipString><MessageString type="string">Execute macro FillByte</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillByte><FillWord type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillWord ..</MenuString><ToolTipString type="string">Macro FillWord</ToolTipString><MessageString type="string">Execute macro FillWord</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillWord><FillDWord type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillDWord ..</MenuString><ToolTipString type="string">Macro FillDWord</ToolTipString><MessageString type="string">Execute macro FillDWord</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillDWord><NoOfFunctions type="int">5</NoOfFunctions></Macro_24_09_13_12_19_33_0></MacroGuiEntries><LastSelectedMacro type="string"></LastSelectedMacro></UDE.Script></AddOns><MultiCoreRunControl type="key"><NoOfRunCtrlGroups type="int">0</NoOfRunCtrlGroups></MultiCoreRunControl><Core0 type="key"><ViewSrv type="key"><PowerPcCpuWin type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW type="key"><FrameCreated type="string">28.08.2013 15:32:24:478</FrameCreated><ViewSrv type="key"/><NETFrameMode type="int">77826</NETFrameMode><NETFrameSaveIndex type="int">5</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core0</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW type="int">0</SAVED_VIEW></PowerPcCpuWin><StdUDESymbolExplWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">28.08.2013 15:00:07:176</FrameCreated><ViewSrv type="key"/><NETFrameMode type="int">77827</NETFrameMode><NETFrameSaveIndex type="int">4</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core0</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdUDESymbolExplWin><StdUDEProgWin type="key"><SAVED_VIEW_OBJS type="int">2</SAVED_VIEW_OBJS><OPEN_VIEW00 type="key"><FrameCreated type="string">28.08.2013 15:30:43:451</FrameCreated><ViewSrv type="key"/><SourceFile type="string">..\main.c</SourceFile><SourceFileInstFlag type="int">1</SourceFileInstFlag><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">3</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core0</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW00><SAVED_VIEW00 type="int">0</SAVED_VIEW00><OPEN_VIEW01 type="key"><FrameCreated type="string">24.02.2014 14:12:15:832</FrameCreated><ViewSrv type="key"/><SourceFile type="string">..\..\..\..\os\hal\ports\SPC5\SPC56ECxx\hal_lld.c</SourceFile><SourceFileInstFlag type="int">2</SourceFileInstFlag><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">8</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core0</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW01><SAVED_VIEW01 type="int">1</SAVED_VIEW01></StdUDEProgWin><StdUDESFRView type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW00 type="key"><FrameCreated type="string">28.08.2013 15:31:19:129</FrameCreated><ViewSrv type="key"><SFRView type="key"><NumberOfBitFieldsPerRow type="bin" size="8">AwAAAA==</NumberOfBitFieldsPerRow><BitfieldValueMode type="bin" size="8">AQAAAA==</BitfieldValueMode><NameWidth type="bin" size="8">fQAAAA==</NameWidth><ValueWidth type="bin" size="8">UwAAAA==</ValueWidth><Bitfield1Width type="bin" size="8">QwAAAA==</Bitfield1Width><Value1Width type="bin" size="8">QwAAAA==</Value1Width><Bitfield2Width type="bin" size="8">QwAAAA==</Bitfield2Width><Value2Width type="bin" size="8">QwAAAA==</Value2Width><Bitfield3Width type="bin" size="8">QwAAAA==</Bitfield3Width><Value3Width type="bin" size="8">SAAAAA==</Value3Width><Bitfield4Width type="bin" size="8">AAAAAA==</Bitfield4Width><Value4Width type="bin" size="8">AAAAAA==</Value4Width><TopIndex type="bin" size="8">AAAAAA==</TopIndex><CaretIndex type="bin" size="8">AAAAAA==</CaretIndex></SFRView></ViewSrv><NETFrameMode type="int">77825</NETFrameMode><NETFrameSaveIndex type="int">2</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core0</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW00><SAVED_VIEW00 type="int">0</SAVED_VIEW00></StdUDESFRView><StdUDELocalsWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS><OPEN_VIEW type="key"><FrameCreated type="string">28.08.2013 15:32:08:193</FrameCreated><ViewSrv type="key"><NameWidth type="int">144</NameWidth><AddressWidth type="int">0</AddressWidth><ValueWidth type="int">96</ValueWidth><Value2Width type="int">0</Value2Width><MinMaxWidth type="int">0</MinMaxWidth></ViewSrv><NETFrameMode type="int">86016</NETFrameMode><NETFrameSaveIndex type="int">4294967295</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core0</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW></StdUDELocalsWin><StdUDEWatchWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEWatchWin><StdUDESimIOWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDESimIOWin><StdUDEHtmlDocWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEHtmlDocWin><StdUDEGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEGraphWin><StdUDETimeSampleGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDETimeSampleGraphWin><UDEProfilingWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDEProfilingWin><StdUDEMemWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEMemWin><UDEStackWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDEStackWin></ViewSrv><UDE.StdDbgSrv type="key"><INI_SECTION type="key"/><UDE.PowerPcArchSrv type="key"><UDE.PpcJtagTargIntf type="key"><NewWorkspace type="flag">0</NewWorkspace></UDE.PpcJtagTargIntf></UDE.PowerPcArchSrv><UDE.UDESymbol type="key"><BinaryFiles type="key"><Number type="int">1</Number><BinaryFile1 type="key"><FullPath type="string">..\build\ch.elf</FullPath><Breakpoints type="key"><Breakpoint1 type="string">Software;enabled;0;disabled;'main {C:\ChibiStudio\workspace\SPC5\demos\SPC56ECxx OS-Less Test Application\main.c} .25';main.c;1;0;;$disabled; ;disabled; ;</Breakpoint1><Number type="int">1</Number></Breakpoints></BinaryFile1></BinaryFiles><MultiCoreLoader type="key"><TargetFile1 type="string">..\build\ch.elf</TargetFile1><TargetFileMapping1 type="string">3,0</TargetFileMapping1><TargetFileOptions1 type="string">00000000</TargetFileOptions1><TargetFileCodeRelocation1 type="string">0x14</TargetFileCodeRelocation1><TargetFileDataRelocation1 type="string">0x14</TargetFileDataRelocation1><Number type="int">1</Number></MultiCoreLoader><ExpressionClipboard type="key"><Number type="int">0</Number></ExpressionClipboard></UDE.UDESymbol><STG_ADDON_PROF type="key"><UDE_Graphwin_Trace_AddOn type="key" name="UDE Graphwin Trace AddOn"><LOAD_STATE type="flag">1</LOAD_STATE></UDE_Graphwin_Trace_AddOn><UDELicense_Server type="key" name="UDELicense Server"><LOAD_STATE type="flag">1</LOAD_STATE></UDELicense_Server><UDEMemtool type="key"><LOAD_STATE type="flag">1</LOAD_STATE><FlashMod_PFLASH type="key"/><FlashMod_PFLASH1 type="key"/><FlashMod_DFLASH type="key"/><FlashMod_SHADOWFLASH type="key"/><Frontend type="key"><AutoStartProgAfterDownload type="flag">0</AutoStartProgAfterDownload><AutoCloseExecCmdDialog type="flag">0</AutoCloseExecCmdDialog><AllowOverwrite type="flag">0</AllowOverwrite><LastModule type="int">0</LastModule><VerifyProt type="flag">0</VerifyProt><VerifyProtFile type="string">verify.txt</VerifyProtFile><VerifyOnExit type="flag">0</VerifyOnExit><StoreLoadedSections type="flag">0</StoreLoadedSections></Frontend></UDEMemtool><ADD_ON_DEL_FLAG type="flag">0</ADD_ON_DEL_FLAG></STG_ADDON_PROF><CommQueueHndlStg type="key"><Beep type="flag">0</Beep><Retry type="flag">0</Retry><RetryPeriod type="int">0</RetryPeriod></CommQueueHndlStg><TargetStateHndlStg type="key"/></UDE.StdDbgSrv><MRUSourceFileList type="key"><NoOfMRUSrcFileEntries type="int">2</NoOfMRUSrcFileEntries><MRUSrcFile0 type="string">..\main.c</MRUSrcFile0><MRUSrcFile1 type="string">..\..\..\..\os\hal\ports\SPC5\SPC56ECxx\hal_lld.c</MRUSrcFile1></MRUSourceFileList></Core0><Core1 type="key"><ViewSrv type="key"><PowerPcCpuWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></PowerPcCpuWin><StdUDESymbolExplWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">28.08.2013 15:00:07:379</FrameCreated><ViewSrv type="key"/><NETFrameMode type="int">77828</NETFrameMode><NETFrameSaveIndex type="int">6</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core1</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdUDESymbolExplWin><StdUDEProgWin type="key"><OPEN_VIEW00 type="key"><FrameCreated type="string">24.02.2014 14:11:46:971</FrameCreated><ViewSrv type="key"/><SourceFile type="string">code &lt;0xFFFFFC00-0xFFFFFFFF&gt;</SourceFile><SourceFileInstFlag type="int">8</SourceFileInstFlag><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">7</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core1</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW00><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW00 type="int">0</SAVED_VIEW00><OPEN_VIEW01 type="key"><FrameCreated type="string">28.08.2013 15:30:43:499</FrameCreated><ViewSrv type="key"/><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">4294967295</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core1</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW01></StdUDEProgWin><StdUDESFRView type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDESFRView><StdUDELocalsWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDELocalsWin><StdUDEWatchWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEWatchWin><StdUDESimIOWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDESimIOWin><StdUDEHtmlDocWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEHtmlDocWin><StdUDEGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEGraphWin><StdUDETimeSampleGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDETimeSampleGraphWin><UDEProfilingWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDEProfilingWin><StdUDEMemWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEMemWin><UDEStackWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDEStackWin></ViewSrv><UDE.StdDbgSrv type="key"><INI_SECTION type="key"><System type="key"><PROGRAM1_SERVICE_MODE type="int">2</PROGRAM1_SERVICE_MODE></System><Monitor type="key"><PROGRAM1_CRC_CHECK type="int">1</PROGRAM1_CRC_CHECK></Monitor></INI_SECTION><UDE.PowerPcArchSrv type="key"><UDE.PpcJtagTargIntf type="key"><NewWorkspace type="flag">0</NewWorkspace></UDE.PpcJtagTargIntf></UDE.PowerPcArchSrv><UDE.UDESymbol type="key"><BinaryFiles type="key"><Number type="int">1</Number><BinaryFile1 type="key"><FullPath type="string">..\build\out.elf</FullPath></BinaryFile1></BinaryFiles><ExpressionClipboard type="key"><Number type="int">0</Number></ExpressionClipboard></UDE.UDESymbol><STG_ADDON_PROF type="key"><UDE_Graphwin_Trace_AddOn type="key" name="UDE Graphwin Trace AddOn"><LOAD_STATE type="flag">1</LOAD_STATE></UDE_Graphwin_Trace_AddOn><UDELicense_Server type="key" name="UDELicense Server"><LOAD_STATE type="flag">1</LOAD_STATE></UDELicense_Server><ADD_ON_DEL_FLAG type="flag">0</ADD_ON_DEL_FLAG></STG_ADDON_PROF><CommQueueHndlStg type="key"><Beep type="flag">0</Beep><Retry type="flag">0</Retry><RetryPeriod type="int">0</RetryPeriod></CommQueueHndlStg><TargetStateHndlStg type="key"/></UDE.StdDbgSrv><MRUSourceFileList type="key"><NoOfMRUSrcFileEntries type="int">1</NoOfMRUSrcFileEntries><MRUSrcFile0 type="string">code &lt;0xFFFFFC00-0xFFFFFFFF&gt;</MRUSrcFile0></MRUSourceFileList></Core1><TargetInfoFile type="string">stm_spc56ec74a256s_spc56ec74_minimodule_debug_jtag.cfg</TargetInfoFile><LastWriteDate type="string">24.02.2014 14:13:32:999</LastWriteDate></stg>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/UDE/stm_spc56ec74a256s_spc56ec74_minimodule_debug_jtag.cfg b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/UDE/stm_spc56ec74a256s_spc56ec74_minimodule_debug_jtag.cfg
new file mode 100644
index 0000000..efb0181
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/UDE/stm_spc56ec74a256s_spc56ec74_minimodule_debug_jtag.cfg
@@ -0,0 +1,290 @@
+[Main]
+Signature=UDE_TARGINFO_2.0
+Description=STM SPC56EC74A256S Mini Module with Dual Core SPC56EC74 (Jtag)
+Description1=MMU preinitialized, memory mapping 1:1, VLE enabled for SRAM and Flash
+Description2=PLL set for 120MHz
+Description3=FLASH programming prepared but not enabled
+Description4=Write Filter for BAM Module
+MCUs=Controller0
+Architecture=PowerPC
+Vendor=STM
+Board=SPC56EC74A256S Mini Module
+
+[Controller0]
+Family=PowerPC
+Type=SPC56EC74
+Enabled=1
+IntClock=120000
+MemDevs=BAMWriteFilter
+ExtClock=40000
+
+[Controller0.Core0]
+Protocol=PPCJTAG
+Enabled=1
+
+[Controller0.Core1]
+Protocol=PPCJTAG
+Enabled=1
+
+[Controller0.BAMWriteFilter]
+Description=BAM WriteAccess Filter
+Range0Start=0xFFFFC000
+Range0Size=0x4000
+Enabled=1
+Handler=AccessFilter
+Mode=ReadOnly
+
+[Controller0.PFLASH]
+Enabled=1
+EnableMemtoolByDefault=1
+
+[Controller0.PFLASH1]
+Enabled=1
+EnableMemtoolByDefault=1
+
+[Controller0.DFLASH]
+Enabled=1
+EnableMemtoolByDefault=1
+
+[Controller0.SHADOWFLASH]
+Enabled=1
+EnableMemtoolByDefault=0
+
+[Controller0.Core0.LoadedAddOn]
+UDEMemtool=1
+
+[Controller0.Core0.PpcJtagTargIntf]
+PortType=FTDI
+ResetWaitTime=500
+MaxJtagClk=5000
+DoSramInit=1
+UseNexus=1
+AdaptiveJtagPhaseShift=1
+ConnOption=Default
+ChangeJtagClk=-1
+HaltAfterReset=1
+SimioAddr=g_JtagSimioAccess
+FreezeTimers=1
+InvalidTlbOnReset=1
+InvalidateCache=1
+ForceCacheFlush=1
+IgnoreLockedLines=0
+ExecInitCmds=1
+JtagTapNumber=0
+JtagNumOfTaps=1
+JtagNumIrBefore=0
+JtagNumIrAfter=0
+SimioAddr=g_JtagSimioAccess
+FlushCache=0
+AllowMmuSetup=1
+UseExtReset=1
+HandleWdtBug=0
+ForceEndOfReset=0
+JtagViaPod=0
+AllowResetOnCheck=0
+ChangeMsr=0
+ChangeMsrValue=0x0
+ExecOnStartCmds=0
+ExecOnHaltCmds=0
+EnableProgramTimeMeasurement=0
+UseHwResetMode=0
+TargetPort=Default
+HandleNexusAccessBug=0
+DoNotEnableTrapSwBrp=0
+BootPasswd0=0xFEEDFACE
+BootPasswd1=0xCAFEBEEF
+BootPasswd2=0xFFFFFFFF
+BootPasswd3=0xFFFFFFFF
+BootPasswd4=0xFFFFFFFF
+BootPasswd5=0xFFFFFFFF
+BootPasswd6=0xFFFFFFFF
+BootPasswd7=0xFFFFFFFF
+CommDevSel=PortType=USB,Type=FTDI
+JtagIoType=Jtag
+ExecOnHaltCmdsWhileHalted=0
+TimerForPTM=Default
+AllowBreakOnUpdateBreakpoints=0
+ClearDebugStatusOnHalt=1
+HwResetMode=Simulate
+UseMasterNexusIfResetState=1
+UseLocalAddressTranslation=1
+Use64BitNexus=0
+InitSramOnlyWhenNotInitialized=0
+AllowHarrForUpdateDebugRegs=0
+DisableE2EECC=0
+UseCore0ForNexusMemoryAccessWhileRunning=0
+
+[Controller0.Core0.PpcJtagTargIntf.InitScript]
+
+// select TLB 1
+SETSPR 0x274 0x10000108 0xFFFFFFFF
+
+// programm internal Flash, no cache because of flash
+// TLB 1, entry 0
+SETSPR 0x270 0x10000000 0xFFFFFFFF
+// Valid, protect against invalidation, global entry, size=16MB
+SETSPR 0x271 0xC0000700 0xFFFFFFFF
+// effective page number 00000000
+SETSPR 0x272 0x28 0xFFFFFFFF
+// real page 00000000, UX,SX,UW,SW,UR,SR
+SETSPR 0x273 0x3F 0xFFFFFFFF
+// execute TLB write instruction
+EXECOPCODE 0x7C0007A4
+
+// programm internal SRAM
+// TLB 1, entry 1
+SETSPR 0x270 0x10010000 0xFFFFFFFF
+// Valid, protect against invalidation, global entry, size=16MB
+SETSPR 0x271 0xC0000700 0xFFFFFFFF
+// effective page number 40000000, I
+SETSPR 0x272 0x40000028 0xFFFFFFFF
+// real page 0x40000000, UX,SX,UW,SW,UR,SR
+SETSPR 0x273 0x4000003F 0xFFFFFFFF
+// execute TLB write instruction
+EXECOPCODE 0x7C0007A4
+
+// programm peripheral A modules
+// TLB 1, entry 2
+SETSPR 0x270 0x10020000 0xFFFFFFFF
+// Valid, protect against invalidation, global entry, size=1MB
+SETSPR 0x271 0xC0000500 0xFFFFFFFF
+// effective page number C3F00000, I
+SETSPR 0x272 0xC3F0000A 0xFFFFFFFF
+// real page C3F00000, UX,SX,UW,SW,UR,SR
+SETSPR 0x273 0xC3F0003F 0xFFFFFFFF
+// execute TLB write instruction
+EXECOPCODE 0x7C0007A4
+
+// programm off plattfrom modules
+// TLB 1, entry 3
+SETSPR 0x270 0x10030000 0xFFFFFFFF
+// Valid, protect against invalidation, global entry, size=1MB
+SETSPR 0x271 0xC0000500 0xFFFFFFFF
+// effective page number FFE00000, I,G
+SETSPR 0x272 0xFFE0000A 0xFFFFFFFF
+// real page FFE00000, UX,SX,UW,SW,UR,SR
+SETSPR 0x273 0xFFE0003F 0xFFFFFFFF
+// execute TLB write instruction
+EXECOPCODE 0x7C0007A4
+
+// programm on plattfrom modules
+// TLB 1, entry 4
+SETSPR 0x270 0x10040000 0xFFFFFFFF
+// Valid, protect against invalidation, global entry, size=1MB
+SETSPR 0x271 0xC0000500 0xFFFFFFFF
+// effective page number FFF00000, I,G
+SETSPR 0x272 0xFFF0000A 0xFFFFFFFF
+// real page FFF00000, UX,SX,UW,SW,UR,SR
+SETSPR 0x273 0xFFF0003F 0xFFFFFFFF
+// execute TLB write instruction
+EXECOPCODE 0x7C0007A4
+
+// setup IVOPR
+// points to internal memory at 0x40000000
+SETSPR 0x3F 0x40000000 0xFFFFFFFF
+
+// disable watchdog
+SET SWT_SR 0x0000C520
+SET SWT_SR 0x0000D928
+SET SWT_CR 0xFF00000A
+
+// setup pll and clocks
+// Oscillator select
+SET 0xC3FE0374 0x1000000
+SET 0xC3FE0370 0x1
+// enable all modes
+SET 0xC3FDC008 0x5FF
+// run mode
+SET 0xC3FDC02C 0x1F0032
+// enable peripherals in run and low power modes
+SET 0xC3FDC080 0xFE
+SET 0xC3FDC0A0 0x500
+// Z0 clock dividers -> 0.5 system clock
+//SET8 0xC3FE00C0 0x01
+// system clock dividers
+SET8 0xC3FE037C 0x80
+SET8 0xC3FE037D 0x80
+SET8 0xC3FE037E 0x80
+// enable auxiliary clocks
+SET16 0xC3FE0380 0x100
+SET16 0xC3FE0388 0x0
+SET8 0xC3FE038C 0x80
+// setup clock monitor
+SET 0xC3FE0100 0x6
+// Make DRUN configuration active
+SET 0xC3FDC004 0x30005AF0
+SET 0xC3FDC004 0x3000A50F
+WAIT 5
+// setup pll to 120MHz 40Mz external
+SET 0xC3FE00A0 0x0D300041
+// run mode
+SET 0xC3FDC02C 0x1F00F4
+// Make DRUN configuration active
+SET 0xC3FDC004 0x30005AF0
+SET 0xC3FDC004 0x3000A50F
+WAIT 5
+// setup SSCM erro cfg for debug
+SET 0xC3FD8006 0x3 0x3
+
+[Controller0.Core0.PpcJtagTargIntf.OnStartScript]
+
+[Controller0.Core0.PpcJtagTargIntf.OnHaltScript]
+
+[Controller0.Core1.PpcJtagTargIntf]
+PortType=Default
+ResetWaitTime=500
+MaxJtagClk=5000
+DoSramInit=1
+UseNexus=1
+AdaptiveJtagPhaseShift=1
+ConnOption=Break
+ChangeJtagClk=-1
+HaltAfterReset=0
+SimioAddr=g_JtagSimioAccess
+FreezeTimers=1
+InvalidTlbOnReset=0
+InvalidateCache=0
+ForceCacheFlush=0
+IgnoreLockedLines=0
+ExecInitCmds=0
+JtagTapNumber=0
+JtagNumOfTaps=1
+JtagNumIrBefore=0
+JtagNumIrAfter=0
+SimioAddr=g_JtagSimioAccess
+FlushCache=0
+AllowMmuSetup=0
+UseExtReset=0
+HandleWdtBug=0
+ForceEndOfReset=0
+JtagViaPod=0
+AllowResetOnCheck=0
+TargetPort=Default
+ChangeMsr=0
+ChangeMsrValue=0x0
+ExecOnStartCmds=0
+ExecOnHaltCmds=0
+EnableProgramTimeMeasurement=0
+UseHwResetMode=0
+HandleNexusAccessBug=0
+DoNotEnableTrapSwBrp=0
+BootPasswd0=0xFEEDFACE
+BootPasswd1=0xCAFEBEEF
+BootPasswd2=0xFFFFFFFF
+BootPasswd3=0xFFFFFFFF
+BootPasswd4=0xFFFFFFFF
+BootPasswd5=0xFFFFFFFF
+BootPasswd6=0xFFFFFFFF
+BootPasswd7=0xFFFFFFFF
+CommDevSel=
+
+[Controller0.Core1.PpcJtagTargIntf.InitScript]
+
+[Controller0.Core1.PpcJtagTargIntf.OnStartScript]
+
+[Controller0.Core1.PpcJtagTargIntf.OnHaltScript]
+
+[Controller0.Core0.DebugServer.DbgFramework]
+FRAMEWORK_COLOR=14804223
+[Controller0.Core1.DebugServer.DbgFramework]
+FRAMEWORK_COLOR=16777152
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/chconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/chconf.h
new file mode 100644
index 0000000..f6244ad
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/cw/ch/ch.lcf b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/cw/ch/ch.lcf
new file mode 100644
index 0000000..0e49bcd
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/cw/ch/ch.lcf
@@ -0,0 +1,153 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio.
+
+    This file is part of ChibiOS.
+
+    ChibiOS is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 3 of the License, or
+    (at your option) any later version.
+
+    ChibiOS is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+/*
+ * SPC56EC74 memory setup.
+ */
+MEMORY
+{
+    rom       : org = 0x00000000, len = 0x00300000
+    dataflash : org = 0x00800000, len = 0x00010000
+    ram       : org = 0x40000000, len = 0x00030000
+}
+
+__irq_stack_size__     = 0;
+__process_stack_size__ = 0x1000;
+
+__ram_size__  = SIZEOF(ram);
+__ram_start__ = ADDR(ram);
+__ram_end__   = ADDR(ram) + SIZEOF(ram);
+
+SECTIONS
+{
+  GROUP:
+  {
+    .boot ALIGN(16):
+    {
+      __ivpr_base__ = .;
+      KEEP(*(.boot))
+    }
+
+    .handlers (VLECODE) ALIGN(16):
+    {
+      KEEP(*(.handlers))
+    }
+
+    .crt0 (VLECODE) ALIGN(16):
+    {
+      KEEP(*(.crt0))
+    }
+
+    .init: {}
+    .init_vle (VLECODE) ALIGN(4):
+    {
+       *(.init)
+       *(.init_vle)
+    }
+
+    .vectors ALIGN(0x800):
+    {
+      KEEP(*(.vectors))
+    }
+
+    .code (VLECODE) ALIGN(16):
+    {
+      *(.text)
+      *(.text_vle)
+    }
+
+    .const (CONST) ALIGN(16):
+    {
+      *(.rdata)
+      *(.rodata)
+    }
+
+    .sdata2 (CONST) ALIGN(16):
+    {
+      __sdata2_start__ = . + 0x8000;
+      *(.sdata2)
+      *(.sbss2)
+    }
+
+   .ctors: {}
+   .dtors: {}
+    extab: {}
+    extabindex: {}
+
+    . = ALIGN(4);
+    __romdata_start__ = .;
+  } > rom
+
+  GROUP:
+  {
+    .stacks:
+    {
+        . = ALIGN(8);
+        __irq_stack_base__ = .;
+        . = . + __irq_stack_size__;
+        . = ALIGN(8);
+        __irq_stack_end__ = .;
+        __process_stack_base__ = .;
+        __main_thread_stack_base__ = .;
+        . = . + __process_stack_size__;
+        . = ALIGN(8);
+        __process_stack_end__ = .;
+        __main_thread_stack_end__ = .;
+    }
+
+    .data (DATA) LOAD(__romdata_start__):
+    {
+        . = ALIGN(4);
+        __data_start__ = .;
+        *(.data)
+        . = ALIGN(4);
+    }
+
+    .sdata (DATA) LOAD(ROMADDR(.data) + SIZEOF(.data)):
+    {
+        __sdata_start__ = . + 0x8000;
+        *(.sdata)
+        __data_end__ = .;
+    }
+
+    .sbss (BSS):
+    {
+        __bss_start__ = .;
+        *(.sbss)
+    }
+
+    .bss (BSS):
+    {
+        *(.bss)
+        __bss_end__ = .;
+    }
+
+    /* The default heap uses the (statically) unused part of a RAM section.*/
+    .heap:
+    {
+      . = ALIGN(8);
+      __heap_base__ = .;
+      . = ADDR(ram) + SIZEOF(ram);
+      __heap_end__ = .;
+    }
+
+    .PPC.EMB.sdata0: {}
+    .PPC.EMB.sbss0: {}
+  } > ram
+}
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/cw/ch/ch.mcp b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/cw/ch/ch.mcp
new file mode 100644
index 0000000..f4823f0
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/cw/ch/ch.mcp
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/halconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/halconf.h
new file mode 100644
index 0000000..6827953
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/halconf.h
@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM                  FALSE
+#endif
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/main.c b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/main.c
new file mode 100644
index 0000000..957f0e8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/main.c
@@ -0,0 +1,202 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+#include "shell.h"
+#include "chprintf.h"
+
+#define SHELL_WA_SIZE   THD_WORKING_AREA_SIZE(1024)
+#define TEST_WA_SIZE    THD_WORKING_AREA_SIZE(256)
+
+static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
+  size_t n, size;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: mem\r\n");
+    return;
+  }
+  n = chHeapStatus(NULL, &size);
+  chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX());
+  chprintf(chp, "heap fragments   : %u\r\n", n);
+  chprintf(chp, "heap free total  : %u bytes\r\n", size);
+}
+
+static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
+  static const char *states[] = {CH_STATE_NAMES};
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: threads\r\n");
+    return;
+  }
+  chprintf(chp, "    addr    stack prio refs     state time\r\n");
+  tp = chRegFirstThread();
+  do {
+    chprintf(chp, "%08lx %08lx %4lu %4lu %9s\r\n",
+            (uint32_t)tp, (uint32_t)tp->p_ctx.sp,
+            (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
+            states[tp->p_state]);
+    tp = chRegNextThread(tp);
+  } while (tp != NULL);
+}
+
+static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: test\r\n");
+    return;
+  }
+  tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(),
+                           TestThread, chp);
+  if (tp == NULL) {
+    chprintf(chp, "out of memory\r\n");
+    return;
+  }
+  chThdWait(tp);
+}
+
+static const ShellCommand commands[] = {
+  {"mem", cmd_mem},
+  {"threads", cmd_threads},
+  {"test", cmd_test},
+  {NULL, NULL}
+};
+
+static const ShellConfig shell_cfg1 = {
+  (BaseSequentialStream *)&SD1,
+  commands
+};
+
+/*
+ * LEDs blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+
+  while (true) {
+    unsigned i;
+
+    for (i = 0; i < 4; i++) {
+      palClearPad(PORT_E, PE_LED1);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT_E, PE_LED2);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT_E, PE_LED3);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT_E, PE_LED4);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_E, PE_LED1);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_E, PE_LED2);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_E, PE_LED3);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_E, PE_LED4);
+      chThdSleepMilliseconds(300);
+    }
+
+    for (i = 0; i < 4; i++) {
+      palTogglePort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) |
+                            PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4));
+      chThdSleepMilliseconds(500);
+      palTogglePort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) |
+                            PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4));
+      chThdSleepMilliseconds(500);
+    }
+
+    for (i = 0; i < 4; i++) {
+      palTogglePad(PORT_E, PE_LED1);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_E, PE_LED1);
+      palTogglePad(PORT_E, PE_LED2);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_E, PE_LED2);
+      palTogglePad(PORT_E, PE_LED3);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_E, PE_LED3);
+      palTogglePad(PORT_E, PE_LED4);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_E, PE_LED4);
+    }
+
+    for (i = 0; i < 4; i++) {
+      palClearPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED3));
+      palSetPort(PORT_E, PAL_PORT_BIT(PE_LED2) | PAL_PORT_BIT(PE_LED4));
+      chThdSleepMilliseconds(500);
+      palClearPort(PORT_E, PAL_PORT_BIT(PE_LED2) | PAL_PORT_BIT(PE_LED4));
+      palSetPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED3));
+      chThdSleepMilliseconds(500);
+    }
+
+    palSetPort(PORT_E, PAL_PORT_BIT(PE_LED1) | PAL_PORT_BIT(PE_LED2) |
+                       PAL_PORT_BIT(PE_LED3) | PAL_PORT_BIT(PE_LED4));
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+  thread_t *shelltp = NULL;
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Shell manager initialization.
+   */
+  shellInit();
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   */
+  sdStart(&SD1, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity.
+   */
+  while (true) {
+    if (!shelltp)
+      shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
+    else if (chThdTerminatedX(shelltp)) {
+      chThdRelease(shelltp);    /* Recovers memory of the previous shell.   */
+      shelltp = NULL;           /* Triggers spawning of a new shell.        */
+    }
+    chThdSleepMilliseconds(1000);
+  }
+  return 0;
+}
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/mcuconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/mcuconf.h
new file mode 100644
index 0000000..0172e81
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EC-EVB/mcuconf.h
@@ -0,0 +1,293 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * SPC56ECxx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 1...15       Lowest...Highest.
+ * DMA priorities:
+ * 0...15       Highest...Lowest.
+ */
+
+#define SPC56ECxx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define SPC5_NO_INIT                        FALSE
+#define SPC5_ALLOW_OVERCLOCK                FALSE
+#define SPC5_DISABLE_WATCHDOG               TRUE
+#define SPC5_FMPLL0_IDF_VALUE               5
+#define SPC5_FMPLL0_NDIV_VALUE              60
+#define SPC5_FMPLL0_ODF                     SPC5_FMPLL_ODF_DIV4
+#define SPC5_XOSCDIV_VALUE                  1
+#define SPC5_IRCDIV_VALUE                   1
+#define SPC5_PERIPHERAL1_CLK_DIV_VALUE      4
+#define SPC5_PERIPHERAL2_CLK_DIV_VALUE      2
+#define SPC5_PERIPHERAL3_CLK_DIV_VALUE      2
+#define SPC5_Z0_CLK_DIV_VALUE               2
+#define SPC5_FEC_CLK_DIV_VALUE              2
+#define SPC5_FLASH_CLK_DIV_VALUE            2
+#define SPC5_CLOCK_FAILURE_HOOK()           osalSysHalt("clock failure")
+
+#define SPC5_EMIOS0_GPRE_VALUE              20
+#define SPC5_EMIOS1_GPRE_VALUE              20
+
+/*
+ * EDMA driver settings.
+ */
+#define SPC5_EDMA_CR_SETTING                (EDMA_CR_GRP1PRI(1) |           \
+                                             EDMA_CR_GRP0PRI(0) |           \
+                                             EDMA_CR_EMLM       |           \
+                                             EDMA_CR_ERGA)
+#define SPC5_EDMA_GROUP0_PRIORITIES         0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+#define SPC5_EDMA_GROUP1_PRIORITIES         0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+#define SPC5_EDMA_ERROR_IRQ_PRIO            12
+#define SPC5_EDMA_ERROR_HANDLER()           osalSysHalt("DMA failure")
+
+/*
+ * SERIAL driver system settings.
+ */
+#define SPC5_SERIAL_USE_LINFLEX0            TRUE
+#define SPC5_SERIAL_USE_LINFLEX1            FALSE
+#define SPC5_SERIAL_USE_LINFLEX2            FALSE
+#define SPC5_SERIAL_USE_LINFLEX3            FALSE
+#define SPC5_SERIAL_USE_LINFLEX4            FALSE
+#define SPC5_SERIAL_USE_LINFLEX5            FALSE
+#define SPC5_SERIAL_USE_LINFLEX6            FALSE
+#define SPC5_SERIAL_USE_LINFLEX7            FALSE
+#define SPC5_SERIAL_USE_LINFLEX8            FALSE
+#define SPC5_SERIAL_USE_LINFLEX9            FALSE
+#define SPC5_SERIAL_LINFLEX0_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX1_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX2_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX3_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX4_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX5_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX6_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX7_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX8_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX9_PRIORITY       8
+
+/*
+ * SPI driver system settings.
+ */
+#define SPC5_SPI_USE_DSPI0                  FALSE
+#define SPC5_SPI_USE_DSPI1                  FALSE
+#define SPC5_SPI_USE_DSPI2                  FALSE
+#define SPC5_SPI_USE_DSPI3                  FALSE
+#define SPC5_SPI_USE_DSPI4                  FALSE
+#define SPC5_SPI_USE_DSPI5                  FALSE
+#define SPC5_SPI_USE_DSPI6                  FALSE
+#define SPC5_SPI_USE_DSPI7                  FALSE
+#define SPC5_SPI_DMA_MODE                   SPC5_SPI_DMA_RX_ONLY
+#define SPC5_SPI_DSPI0_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3 | SPC5_MCR_PCSIS4 | SPC5_MCR_PCSIS5)
+#define SPC5_SPI_DSPI1_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3 | SPC5_MCR_PCSIS4)
+#define SPC5_SPI_DSPI2_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3)
+#define SPC5_SPI_DSPI3_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1)
+#define SPC5_SPI_DSPI4_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1)
+#define SPC5_SPI_DSPI5_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2)
+#define SPC5_SPI_DSPI6_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3)
+#define SPC5_SPI_DSPI7_MCR                  (0 | SPC5_MCR_PCSIS0 | SPC5_MCR_PCSIS1 | SPC5_MCR_PCSIS2 | SPC5_MCR_PCSIS3)
+#define SPC5_SPI_DSPI0_TX1_DMA_CH_ID        4
+#define SPC5_SPI_DSPI0_TX2_DMA_CH_ID        5
+#define SPC5_SPI_DSPI0_RX_DMA_CH_ID         6
+#define SPC5_SPI_DSPI1_TX1_DMA_CH_ID        7
+#define SPC5_SPI_DSPI1_TX2_DMA_CH_ID        8
+#define SPC5_SPI_DSPI1_RX_DMA_CH_ID         9
+#define SPC5_SPI_DSPI2_TX1_DMA_CH_ID        10
+#define SPC5_SPI_DSPI2_TX2_DMA_CH_ID        11
+#define SPC5_SPI_DSPI2_RX_DMA_CH_ID         12
+#define SPC5_SPI_DSPI3_TX1_DMA_CH_ID        13
+#define SPC5_SPI_DSPI3_TX2_DMA_CH_ID        14
+#define SPC5_SPI_DSPI3_RX_DMA_CH_ID         15
+#define SPC5_SPI_DSPI4_TX1_DMA_CH_ID        16
+#define SPC5_SPI_DSPI4_TX2_DMA_CH_ID        17
+#define SPC5_SPI_DSPI4_RX_DMA_CH_ID         18
+#define SPC5_SPI_DSPI5_TX1_DMA_CH_ID        19
+#define SPC5_SPI_DSPI5_TX2_DMA_CH_ID        20
+#define SPC5_SPI_DSPI5_RX_DMA_CH_ID         21
+#define SPC5_SPI_DSPI6_TX1_DMA_CH_ID        22
+#define SPC5_SPI_DSPI6_TX2_DMA_CH_ID        23
+#define SPC5_SPI_DSPI6_RX_DMA_CH_ID         24
+#define SPC5_SPI_DSPI7_TX1_DMA_CH_ID        25
+#define SPC5_SPI_DSPI7_TX2_DMA_CH_ID        26
+#define SPC5_SPI_DSPI7_RX_DMA_CH_ID         27
+#define SPC5_SPI_DSPI0_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI1_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI2_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI3_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI4_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI5_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI6_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI7_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI0_IRQ_PRIO             10
+#define SPC5_SPI_DSPI1_IRQ_PRIO             10
+#define SPC5_SPI_DSPI2_IRQ_PRIO             10
+#define SPC5_SPI_DSPI3_IRQ_PRIO             10
+#define SPC5_SPI_DSPI4_IRQ_PRIO             10
+#define SPC5_SPI_DSPI5_IRQ_PRIO             10
+#define SPC5_SPI_DSPI6_IRQ_PRIO             10
+#define SPC5_SPI_DSPI7_IRQ_PRIO             10
+#define SPC5_SPI_DMA_ERROR_HOOK(spip)       osalSysHalt("DSPI DMA failure")
+
+/*
+ * ICU-PWM driver system settings.
+ */
+#define SPC5_ICU_USE_EMIOS0_CH0             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH1             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH2             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH3             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH4             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH5             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH6             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH7             FALSE
+#define SPC5_ICU_USE_EMIOS0_CH24            FALSE
+
+#define SPC5_PWM_USE_EMIOS0_GROUP0          FALSE
+#define SPC5_PWM_USE_EMIOS0_GROUP1          FALSE
+
+#define SPC5_EMIOS0_GFR_F0F1_PRIORITY       8
+#define SPC5_EMIOS0_GFR_F2F3_PRIORITY       8
+#define SPC5_EMIOS0_GFR_F4F5_PRIORITY       8
+#define SPC5_EMIOS0_GFR_F6F7_PRIORITY       8
+#define SPC5_EMIOS0_GFR_F8F9_PRIORITY       8
+#define SPC5_EMIOS0_GFR_F10F11_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F12F13_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F14F15_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F16F17_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F18F19_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F20F21_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F22F23_PRIORITY     8
+#define SPC5_EMIOS0_GFR_F24F25_PRIORITY     8
+
+#define SPC5_EMIOS0_START_PCTL              (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_EMIOS0_STOP_PCTL               (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#define SPC5_ICU_USE_EMIOS1_CH24            FALSE
+
+#define SPC5_PWM_USE_EMIOS1_GROUP0          FALSE
+#define SPC5_PWM_USE_EMIOS1_GROUP1          FALSE
+#define SPC5_PWM_USE_EMIOS1_GROUP2          FALSE
+
+#define SPC5_EMIOS1_GFR_F0F1_PRIORITY       8
+#define SPC5_EMIOS1_GFR_F2F3_PRIORITY       8
+#define SPC5_EMIOS1_GFR_F4F5_PRIORITY       8
+#define SPC5_EMIOS1_GFR_F6F7_PRIORITY       8
+#define SPC5_EMIOS1_GFR_F8F9_PRIORITY       8
+#define SPC5_EMIOS1_GFR_F10F11_PRIORITY     8
+#define SPC5_EMIOS1_GFR_F12F13_PRIORITY     8
+#define SPC5_EMIOS1_GFR_F14F15_PRIORITY     8
+#define SPC5_EMIOS1_GFR_F16F17_PRIORITY     8
+#define SPC5_EMIOS1_GFR_F18F19_PRIORITY     8
+#define SPC5_EMIOS1_GFR_F20F21_PRIORITY     8
+#define SPC5_EMIOS1_GFR_F22F23_PRIORITY     8
+#define SPC5_EMIOS1_GFR_F24F25_PRIORITY     8
+
+#define SPC5_EMIOS1_START_PCTL              (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_EMIOS1_STOP_PCTL               (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+/*
+ * CAN driver system settings.
+ */
+#define SPC5_CAN_USE_FILTERS                FALSE
+
+#define SPC5_CAN_USE_FLEXCAN0               FALSE
+#define SPC5_CAN_FLEXCAN0_USE_EXT_CLK       FALSE
+#define SPC5_CAN_FLEXCAN0_PRIORITY          11
+#define SPC5_CAN_FLEXCAN0_START_PCTL        (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_CAN_FLEXCAN0_STOP_PCTL         (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#define SPC5_CAN_USE_FLEXCAN1               FALSE
+#define SPC5_CAN_FLEXCAN1_USE_EXT_CLK       FALSE
+#define SPC5_CAN_FLEXCAN1_PRIORITY          11
+#define SPC5_CAN_FLEXCAN1_START_PCTL        (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_CAN_FLEXCAN1_STOP_PCTL         (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#define SPC5_CAN_USE_FLEXCAN2               FALSE
+#define SPC5_CAN_FLEXCAN2_USE_EXT_CLK       FALSE
+#define SPC5_CAN_FLEXCAN2_PRIORITY          11
+#define SPC5_CAN_FLEXCAN2_START_PCTL        (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_CAN_FLEXCAN2_STOP_PCTL         (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#define SPC5_CAN_USE_FLEXCAN3               FALSE
+#define SPC5_CAN_FLEXCAN3_USE_EXT_CLK       FALSE
+#define SPC5_CAN_FLEXCAN3_PRIORITY          11
+#define SPC5_CAN_FLEXCAN3_START_PCTL        (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_CAN_FLEXCAN3_STOP_PCTL         (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#define SPC5_CAN_USE_FLEXCAN4               FALSE
+#define SPC5_CAN_FLEXCAN4_USE_EXT_CLK       FALSE
+#define SPC5_CAN_FLEXCAN4_PRIORITY          11
+#define SPC5_CAN_FLEXCAN4_START_PCTL        (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_CAN_FLEXCAN4_STOP_PCTL         (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#define SPC5_CAN_USE_FLEXCAN5               FALSE
+#define SPC5_CAN_FLEXCAN5_USE_EXT_CLK       FALSE
+#define SPC5_CAN_FLEXCAN5_PRIORITY          11
+#define SPC5_CAN_FLEXCAN5_START_PCTL        (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_CAN_FLEXCAN5_STOP_PCTL         (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+/*
+* ADC driver system settings.
+*/
+#define SPC5_ADC_USE_ADC0                   FALSE
+#define SPC5_ADC_ADC0_CLK_FREQUENCY         HALF_PERIPHERAL_SET_CLOCK_FREQUENCY
+#define SPC5_ADC_ADC0_AUTO_CLOCK_OFF        FALSE
+#define SPC5_ADC_ADC0_WD_PRIORITY           12
+#define SPC5_ADC_ADC0_DMA_CH_ID             1
+#define SPC5_ADC_ADC0_DMA_IRQ_PRIO          12
+#define SPC5_ADC_ADC0_START_PCTL            (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_ADC_ADC0_STOP_PCTL             (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#define SPC5_ADC_USE_ADC1                   FALSE
+#define SPC5_ADC_ADC1_CLK_FREQUENCY         HALF_PERIPHERAL_SET_CLOCK_FREQUENCY
+#define SPC5_ADC_ADC1_AUTO_CLOCK_OFF        FALSE
+#define SPC5_ADC_ADC1_WD_PRIORITY           12
+#define SPC5_ADC_ADC1_DMA_CH_ID             2
+#define SPC5_ADC_ADC1_DMA_IRQ_PRIO          12
+#define SPC5_ADC_ADC1_START_PCTL            (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_ADC_ADC1_STOP_PCTL             (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/.cproject b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/.cproject
new file mode 100644
index 0000000..bef983b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/.cproject
@@ -0,0 +1,57 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.665946016">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.665946016" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.665946016" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.665946016." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1131493307" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1131493307.1844928918" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1106552272" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1064008669" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.2048166271" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1577341141" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.841305605" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.954135725" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.287919901" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1061591135" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-SPC56EL-EVB.null.2129661677" name="RT-SPC56EL-EVB"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.665946016">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-SPC56EL-EVB"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/.project b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/.project
new file mode 100644
index 0000000..ed857f0
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-SPC56EL-EVB</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_EVB_SPC56EL</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/Makefile b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/Makefile
new file mode 100644
index 0000000..615fd8f
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/Makefile
@@ -0,0 +1,188 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data.
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT =
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = no
+endif
+
+# If enabled, this option allows to compile the application in VLE mode.
+ifeq ($(USE_VLE),)
+  USE_VLE = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the optional exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/e200/compilers/GCC/mk/startup_spc56elxx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/boards/ST_EVB_SPC56EL/board.mk
+include $(CHIBIOS)/os/hal/ports/SPC5/SPC56ELxx/platform.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/e200/compilers/GCC/mk/port.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/SPC56EL60_LSM.ld
+
+# C sources here.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       $(CHIBIOS)/os/hal/lib/streams/memstreams.c \
+       $(CHIBIOS)/os/hal/lib/streams/chprintf.c \
+       $(CHIBIOS)/os/various/shell.c \
+       main.c
+
+# C++ sources here.
+CPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+#MCU  = e500mc -meabi -msdata=none -mnew-mnemonics -mregnames
+MCU  = e200zx -meabi -msdata=none -mnew-mnemonics -mregnames
+
+#TRGT = powerpc-eabi-
+TRGT = ppc-vle-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+MOT  = $(CP) -O srec
+BIN  = $(CP) -O binary
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/e200/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/UDE/debug.wsx b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/UDE/debug.wsx
new file mode 100644
index 0000000..764df1f
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/UDE/debug.wsx
@@ -0,0 +1,275 @@
+<?xml version="1.0" encoding="ISO-8859-1"?>
+<stg format="2.0">
+	<OriginalWsp type="string">debug.wsx</OriginalWsp><BackupWspFlag type="flag">0</BackupWspFlag><UseWspCnt type="int">0</UseWspCnt><WspCloseCnt type="int">0</WspCloseCnt><ProdInfo type="bin" size="52">vQTv/gAAAQAXAAIA8QkPAAAABAAAAAAAPwAAAAAAAAAEAAAAAgAAAAAAAAAAAAAAAAAAAA==</ProdInfo><ProdInfoString type="string">4.0</ProdInfoString><CreationDate type="string">06.02.2013 12:41:07:000</CreationDate><MainFrame type="key"><PersistTreeRoot type="key"><DesktopState type="key"><Placement type="key"><MainFrame type="string">MCAAAAAAAAAAAAAABAAAAAAAPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPPHHAAAAAAPBAAAAAAMGFAAAAAJEDAAAAA</MainFrame><WorkbookMode type="string">False</WorkbookMode><DockStateSaved type="string">True</DockStateSaved></Placement><DockState type="key"><Bars type="string">16</Bars><ScreenCX type="string">1680</ScreenCX><ScreenCY type="string">1050</ScreenCY><Bar-0 type="key"><BarID type="string">59393</BarID><Style type="string">32768</Style><ExStyle type="string">0</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">1000000</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">0</MRUHorzDockCX><MRUHorzDockCY type="string">0</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">0</DockingStyle><TypeID type="string">0</TypeID><ClassName type="string">UDEStatusBar</ClassName><WindowName type="string">For Help, press F1</WindowName><ResourceID type="string">0</ResourceID></Bar-0><Bar-1 type="key"><BarID type="string">59419</BarID><Bars type="string">12</Bars><Bar_0 type="string" name="Bar#0">0</Bar_0><Bar_1 type="string" name="Bar#1">59647</Bar_1><Bar_2 type="string" name="Bar#2">0</Bar_2><Bar_3 type="string" name="Bar#3">59398</Bar_3><Bar_4 type="string" name="Bar#4">59397</Bar_4><Bar_5 type="string" name="Bar#5">59401</Bar_5><Bar_6 type="string" name="Bar#6">59406</Bar_6><Bar_7 type="string" name="Bar#7">0</Bar_7><Bar_8 type="string" name="Bar#8">59403</Bar_8><Bar_9 type="string" name="Bar#9">59399</Bar_9><Bar_10 type="string" name="Bar#10">59402</Bar_10><Bar_11 type="string" name="Bar#11">0</Bar_11><Style type="string">0</Style><ExStyle type="string">0</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">0</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">0</MRUHorzDockCX><MRUHorzDockCY type="string">0</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">0</DockingStyle><TypeID type="string">0</TypeID><ClassName type="string">CUDEDockBar</ClassName><WindowName type="string"></WindowName><ResourceID type="string">0</ResourceID></Bar-1><Bar-2 type="key"><BarID type="string">59422</BarID><Bars type="string">4</Bars><Bar_0 type="string" name="Bar#0">0</Bar_0><Bar_1 type="string" name="Bar#1">256</Bar_1><Bar_2 type="string" name="Bar#2">257</Bar_2><Bar_3 type="string" name="Bar#3">0</Bar_3><Style type="string">0</Style><ExStyle type="string">0</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">0</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">0</MRUHorzDockCX><MRUHorzDockCY type="string">0</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">0</DockingStyle><TypeID type="string">0</TypeID><ClassName type="string">CUDEDockBar</ClassName><WindowName type="string"></WindowName><ResourceID type="string">0</ResourceID></Bar-2><Bar-3 type="key"><BarID type="string">59420</BarID><Bars type="string">5</Bars><Bar_0 type="string" name="Bar#0">0</Bar_0><Bar_1 type="string" name="Bar#1">9100</Bar_1><Bar_2 type="string" name="Bar#2">0</Bar_2><Bar_3 type="string" name="Bar#3">9110</Bar_3><Bar_4 type="string" name="Bar#4">0</Bar_4><Style type="string">0</Style><ExStyle type="string">0</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">0</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">0</MRUHorzDockCX><MRUHorzDockCY type="string">0</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">0</DockingStyle><TypeID type="string">0</TypeID><ClassName type="string">CUDEDockBar</ClassName><WindowName type="string"></WindowName><ResourceID type="string">0</ResourceID></Bar-3><Bar-4 type="key"><BarID type="string">59647</BarID><MRUWidth type="string">381</MRUWidth><Docking type="string">True</Docking><MRUDockID type="string">59419</MRUDockID><MRUDockLeftPos type="string">-1</MRUDockLeftPos><MRUDockTopPos type="string">-1</MRUDockTopPos><MRUDockRightPos type="string">1260</MRUDockRightPos><MRUDockBottomPos type="string">26</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12220</Style><ExStyle type="string">908</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">1000000</PctWidth><MRUFloatCX type="string">381</MRUFloatCX><MRUFloatCY type="string">27</MRUFloatCY><MRUHorzDockCX type="string">1261</MRUHorzDockCX><MRUHorzDockCY type="string">27</MRUHorzDockCY><MRUVertDockCX type="string">76</MRUVertDockCX><MRUVertDockCY type="string">521</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14947</TypeID><ClassName type="string">UDEMDIMenuBar</ClassName><WindowName type="string">Menu bar</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Menu bar</Title><Buttons type="string">BAAAAAAIAACAAAAAAIAADAAAAAAIAAEAAAAAAIAAFAAAAAAIAAGAAAAAAIAAHAAAAAAIAAIAAAAAAIAAJAAAAAAIAAKAAAAAAIAA</Buttons></ToolBarInfoEx></Bar-4><Bar-5 type="key"><BarID type="string">59398</BarID><YPos type="string">26</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">-1</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">110</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">71428</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">111</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Edit</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Edit</Title><NewButtons_BinCount type="string">2</NewButtons_BinCount><NewButtons_BinVal0 type="string">DCBOAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAACCBOAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAFCBOAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAIABOAAAAAAPPPPPPPPAAAAAAAAAA</NewButtons_BinVal0><NewButtons_BinVal1 type="string">AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAA</NewButtons_BinVal1></ToolBarInfoEx></Bar-5><Bar-6 type="key"><BarID type="string">59397</BarID><XPos type="string">110</XPos><YPos type="string">26</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">110</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">290</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">71428</PctWidth><MRUFloatCX type="string">0</MRUFloatCX><MRUFloatCY type="string">0</MRUFloatCY><MRUHorzDockCX type="string">180</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">0</MRUVertDockCX><MRUVertDockCY type="string">0</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">File</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">File</Title><NewButtons_BinCount type="string">3</NewButtons_BinCount><NewButtons_BinVal0 type="string">AHHBAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAABHHBAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAACHHBAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAADHHBAAAAAAPPPPPPPPAAAAAAAAAA</NewButtons_BinVal0><NewButtons_BinVal1 type="string">AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAEHHBAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAFHHBAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAOKHBAAAAAABAAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAA</NewButtons_BinVal1><NewButtons_BinVal2 type="string">AAPPPPPPPPAAAAAAAA</NewButtons_BinVal2></ToolBarInfoEx></Bar-6><Bar-7 type="key"><BarID type="string">59403</BarID><YPos type="string">56</YPos><MRUWidth type="string">134</MRUWidth><Docking type="string">True</Docking><MRUDockID type="string">59419</MRUDockID><MRUDockLeftPos type="string">-1</MRUDockLeftPos><MRUDockTopPos type="string">56</MRUDockTopPos><MRUDockRightPos type="string">133</MRUDockRightPos><MRUDockBottomPos type="string">86</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">1919251557</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">23589</PctWidth><MRUFloatCX type="string">134</MRUFloatCX><MRUFloatCY type="string">30</MRUFloatCY><MRUHorzDockCX type="string">134</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">31</MRUVertDockCX><MRUVertDockCY type="string">129</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Config</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Config</Title><NewButtons_BinCount type="string">2</NewButtons_BinCount><NewButtons_BinVal0 type="string">GJHBAAAAAADAAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAAMMHBAAAAAAOPAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAANMHBAAAAAAAABAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAAFNHBAAAAAAGAAAAAAAKBDLFIMBFC</NewButtons_BinVal0><NewButtons_BinVal1 type="string">NFHJBEGJFDMJNFCMOIPKHNAAAAAAAAPPPPPPPPAAAAAAAAINHBAAAAAACBAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAA</NewButtons_BinVal1></ToolBarInfoEx></Bar-7><Bar-8 type="key"><BarID type="string">59401</BarID><XPos type="string">290</XPos><YPos type="string">26</YPos><MRUWidth type="string">479</MRUWidth><Docking type="string">True</Docking><MRUDockID type="string">59419</MRUDockID><MRUDockLeftPos type="string">290</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">769</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">1600085855</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">285714</PctWidth><MRUFloatCX type="string">479</MRUFloatCX><MRUFloatCY type="string">30</MRUFloatCY><MRUHorzDockCX type="string">479</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">31</MRUVertDockCX><MRUVertDockCY type="string">459</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Views</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Views</Title><NewButtons_BinCount type="string">6</NewButtons_BinCount><NewButtons_BinVal0 type="string">JJHBAAAAAAFBAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAAKJHBAAAAAAPAAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAAMJHBAAAAAAGBAAAAAADBGGJPINFFOGHPIEPKKCPFOMBDBNDAKPAAAAAAAAPPPPPPPPAAAAAAAANKHBAAAAAAAAAAAAAAAGKBFNONHL</NewButtons_BinVal0><NewButtons_BinVal1 type="string">AOENBBBJCBAABADAJECGGLAAAAAAAAPPPPPPPPAAAAAAAAALHBAAAAAAKAAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAACLHBAAAAAAMFAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAADLHBAAAAAAKFAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAA</NewButtons_BinVal1><NewButtons_BinVal2 type="string">AAPPPPPPPPAAAAAAAAFLHBAAAAAANCAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAAGLHBAAAAAAMDAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAAHLHBAAAAAAGEAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAAAMHBAAAAAA</NewButtons_BinVal2><NewButtons_BinVal3 type="string">KAAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAABMHBAAAAAAEBAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAACMHBAAAAAAJBAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAADMHBAAAAAALBAAAAAAKEMNADOLNFNPBMHEJJNE</NewButtons_BinVal3><NewButtons_BinVal4 type="string">MIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAAEMHBAAAAAAAFAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAAFMHBAAAAAAICAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAAHMHBAAAAAANEEAAAAAJEOEILFFBLMIPBEEPLLMEDEOPKHPBGJHAAAAAAAAPPPPPPPP</NewButtons_BinVal4><NewButtons_BinVal5 type="string">AAAAAAAAIMHBAAAAAAGFEAAAAAJEOEILFFBLMIPBEEPLLMEDEOPKHPBGJHAAAAAAAAPPPPPPPPAAAAAAAAJMHBAAAAAAAGEAAAAAJEOEILFFBLMIPBEEPLLMEDEOPKHPBGJHAAAAAAAAPPPPPPPPAAAAAAAALMHBAAAAAAGEAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAA</NewButtons_BinVal5></ToolBarInfoEx></Bar-8><Bar-9 type="key"><BarID type="string">59406</BarID><XPos type="string">769</XPos><YPos type="string">26</YPos><MRUWidth type="string">246</MRUWidth><Docking type="string">True</Docking><MRUDockID type="string">59419</MRUDockID><MRUDockLeftPos type="string">769</MRUDockLeftPos><MRUDockTopPos type="string">26</MRUDockTopPos><MRUDockRightPos type="string">1015</MRUDockRightPos><MRUDockBottomPos type="string">56</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">571428</PctWidth><MRUFloatCX type="string">246</MRUFloatCX><MRUFloatCY type="string">30</MRUFloatCY><MRUHorzDockCX type="string">246</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">77</MRUVertDockCX><MRUVertDockCY type="string">46</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Macro</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Macro</Title><NewButtons_BinCount type="string">2</NewButtons_BinCount><NewButtons_BinVal0 type="string">DKHBAAAAAALDAAAAAAGDHJMPFPDOOJLAGELLAIHGBMMEFJBIPLAAAAAAAAPPPPPPPPAAAAAAAAEKHBAAAAAAAEAAAAAAGDHJMPFPDOOJLAGELLAIHGBMMEFJBIPLAAAAAAAAPPPPPPPPAAAAAAAAGKHBAAAAAAMDAAAAAAGDHJMPFPDOOJLAGELLAIHGBMMEFJBIPLAAAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAAA</NewButtons_BinVal0><NewButtons_BinVal1 type="string">AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAMKHBAAAACAGJAAAAAAAAAANMAJBFNENHHACJPEILAJFEFEECLCDPKCBAAAAAAAKAAAAAAANAAAAAAAFFEEFEHFPGCHLGDHAHBGDGFGAA</NewButtons_BinVal1></ToolBarInfoEx></Bar-9><Bar-10 type="key"><BarID type="string">59399</BarID><XPos type="string">133</XPos><YPos type="string">56</YPos><MRUWidth type="string">504</MRUWidth><Docking type="string">True</Docking><MRUDockID type="string">59419</MRUDockID><MRUDockLeftPos type="string">133</MRUDockLeftPos><MRUDockTopPos type="string">56</MRUDockTopPos><MRUDockRightPos type="string">637</MRUDockRightPos><MRUDockBottomPos type="string">86</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">566153</PctWidth><MRUFloatCX type="string">504</MRUFloatCX><MRUFloatCY type="string">30</MRUFloatCY><MRUHorzDockCX type="string">504</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">123</MRUVertDockCX><MRUVertDockCY type="string">90</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Debug</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Debug</Title><NewButtons_BinCount type="string">5</NewButtons_BinCount><NewButtons_BinVal0 type="string">BLHBAAAAAAIBAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAAELHBAAAAAAOFAAAAAALGLJALHCJPMBOILEPIDADGENFBIDFOCNAAAAAAAAPPPPPPPPAAAAAAAAILHBAAAAAAHAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAJLHBAAAAAAJAAAAAAABINLNCJGPD</NewButtons_BinVal0><NewButtons_BinVal1 type="string">KECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAKLHBAAAAAAKAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAALLHBAAAAAALAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAMLHBAAAAAAIAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAA</NewButtons_BinVal1><NewButtons_BinVal2 type="string">AAPPPPPPPPAAAAAAAANLHBAAAAAABCDAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAOLHBAAAAAANAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAPLHBAAAAAAMAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAA</NewButtons_BinVal2><NewButtons_BinVal3 type="string">PPPPPPPPAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAANHBAAAAAADAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAABNHBAAAAAAGAAAAAAABINLNCJGPDKECNBBCLNMAAAKECHFPLPAAAAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAAAAAAAAAAAAAA</NewButtons_BinVal3><NewButtons_BinVal4 type="string">AAAAAAAAAAAAAAAAAAAAPPPPPPPPAAAAAAAACNHBAAAACAKKAAAAAAAAAADHHMLHLPEKIIOMOEJLGLBHJIBGLAHAFDBAAAAAAADAAAAAAAFAAAAAAADEPGCHFGAAENHBAAAAAADAAAAAAAKBDLFIMBFCNFHJBEGJFDMJNFCMOIPKHNAAAAAAAAPPPPPPPPAAAAAAAA</NewButtons_BinVal4></ToolBarInfoEx></Bar-10><Bar-11 type="key"><BarID type="string">59402</BarID><XPos type="string">637</XPos><YPos type="string">56</YPos><MRUWidth type="string">142</MRUWidth><Docking type="string">True</Docking><MRUDockID type="string">59419</MRUDockID><MRUDockLeftPos type="string">637</MRUDockLeftPos><MRUDockTopPos type="string">56</MRUDockTopPos><MRUDockRightPos type="string">779</MRUDockRightPos><MRUDockBottomPos type="string">86</MRUDockBottomPos><MRUFloatStyle type="string">8196</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">12212</Style><ExStyle type="string">780</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">410256</PctWidth><MRUFloatCX type="string">142</MRUFloatCX><MRUFloatCY type="string">30</MRUFloatCY><MRUHorzDockCX type="string">142</MRUHorzDockCX><MRUHorzDockCY type="string">30</MRUHorzDockCY><MRUVertDockCX type="string">31</MRUVertDockCX><MRUVertDockCY type="string">46</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14946</TypeID><ClassName type="string">CUdeCustomToolBar</ClassName><WindowName type="string">Tools</WindowName><ResourceID type="string">0</ResourceID><ToolBarInfoEx type="key"><Title type="string">Tools</Title><NewButtons type="string">DNHBAAAACAEGAAAAAAAAAAGEAOMHHDMDCIFAKEIIICDBCMNFEDNFHHBAAAAAAAGAAAAAAAFAAAAAAADEPGCHFGAAHNHBAAAAAABOAAAAAAKEMNADOLNFNPBMHEJJNEMIOMIMCHOAOGAAAAAAAAPPPPPPPPAAAAAAAA</NewButtons></ToolBarInfoEx></Bar-11><Bar-12 type="key"><BarID type="string">9110</BarID><XPos type="string">0</XPos><YPos type="string">-2</YPos><Docking type="string">True</Docking><MRUDockID type="string">59420</MRUDockID><MRUDockLeftPos type="string">0</MRUDockLeftPos><MRUDockTopPos type="string">-2</MRUDockTopPos><MRUDockRightPos type="string">514</MRUDockRightPos><MRUDockBottomPos type="string">491</MRUDockBottomPos><MRUFloatStyle type="string">4</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">8084</Style><ExStyle type="string">3889</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">1000000</PctWidth><MRUFloatCX type="string">300</MRUFloatCX><MRUFloatCY type="string">180</MRUFloatCY><MRUHorzDockCX type="string">1260</MRUHorzDockCX><MRUHorzDockCY type="string">150</MRUHorzDockCY><MRUVertDockCX type="string">514</MRUVertDockCX><MRUVertDockCY type="string">493</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14948</TypeID><ClassName type="string">CTabWndControlBar</ClassName><WindowName type="string">Tab Window Bar 0</WindowName><ResourceID type="string">0</ResourceID><ViewServerInstCnt type="string">-1</ViewServerInstCnt><ViewServerMultiInst type="string">False</ViewServerMultiInst><ViewServerType type="string">UDEDesktop Standard Bars</ViewServerType><ViewServerInstName type="string">Tab Window Bar 0</ViewServerInstName><ViewServerDbgSrvCfg type="string">UDEDesktop</ViewServerDbgSrvCfg><ExDockRow type="string">1</ExDockRow><ExDockCol type="string">0</ExDockCol><ExDockHeight type="string">514</ExDockHeight><NoOfDockBars type="string">1</NoOfDockBars></Bar-12><Bar-13 type="key"><BarID type="string">9100</BarID><Visible type="string">False</Visible><XPos type="string">0</XPos><YPos type="string">0</YPos><Docking type="string">True</Docking><MRUDockID type="string">0</MRUDockID><MRUDockLeftPos type="string">0</MRUDockLeftPos><MRUDockTopPos type="string">0</MRUDockTopPos><MRUDockRightPos type="string">0</MRUDockRightPos><MRUDockBottomPos type="string">0</MRUDockBottomPos><MRUFloatStyle type="string">4</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">8084</Style><ExStyle type="string">3889</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">1000000</PctWidth><MRUFloatCX type="string">300</MRUFloatCX><MRUFloatCY type="string">180</MRUFloatCY><MRUHorzDockCX type="string">300</MRUHorzDockCX><MRUHorzDockCY type="string">180</MRUHorzDockCY><MRUVertDockCX type="string">150</MRUVertDockCX><MRUVertDockCY type="string">180</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14948</TypeID><ClassName type="string">CUdeProjectWspBar</ClassName><WindowName type="string">Project Workspace Bar</WindowName><ResourceID type="string">0</ResourceID><ViewServerInstCnt type="string">-1</ViewServerInstCnt><ViewServerMultiInst type="string">False</ViewServerMultiInst><ViewServerType type="string">UDEDesktop Standard Bars</ViewServerType><ViewServerInstName type="string">Project Workspace Bar</ViewServerInstName><ViewServerDbgSrvCfg type="string">UDEDesktop</ViewServerDbgSrvCfg><ExDockRow type="string">0</ExDockRow><ExDockCol type="string">0</ExDockCol><ExDockHeight type="string">0</ExDockHeight><NoOfDockBars type="string">1</NoOfDockBars></Bar-13><Bar-14 type="key"><BarID type="string">256</BarID><XPos type="string">1</XPos><YPos type="string">5</YPos><Docking type="string">True</Docking><MRUDockID type="string">59422</MRUDockID><MRUDockLeftPos type="string">1</MRUDockLeftPos><MRUDockTopPos type="string">5</MRUDockTopPos><MRUDockRightPos type="string">628</MRUDockRightPos><MRUDockBottomPos type="string">185</MRUDockBottomPos><MRUFloatStyle type="string">4</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">36740</Style><ExStyle type="string">64</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">500000</PctWidth><MRUFloatCX type="string">300</MRUFloatCX><MRUFloatCY type="string">180</MRUFloatCY><MRUHorzDockCX type="string">627</MRUHorzDockCX><MRUHorzDockCY type="string">180</MRUHorzDockCY><MRUVertDockCX type="string">150</MRUVertDockCX><MRUVertDockCY type="string">680</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14948</TypeID><ClassName type="string">UDEFrameBar</ClassName><WindowName type="string">Message View</WindowName><ResourceID type="string">0</ResourceID><ViewServerInstCnt type="string">-1</ViewServerInstCnt><ViewServerMultiInst type="string">False</ViewServerMultiInst><ViewServerType type="string">StdUDEMessageWin</ViewServerType><ViewServerInstName type="string">MainFrame.StdUDEMessageWin.OPEN_VIEW</ViewServerInstName><ViewServerDbgSrvCfg type="string">WorkspaceManager</ViewServerDbgSrvCfg><ExDockRow type="string">0</ExDockRow><ExDockCol type="string">0</ExDockCol><ExDockHeight type="string">180</ExDockHeight><NoOfDockBars type="string">2</NoOfDockBars></Bar-14><Bar-15 type="key"><BarID type="string">257</BarID><XPos type="string">634</XPos><YPos type="string">5</YPos><Docking type="string">True</Docking><MRUDockID type="string">59422</MRUDockID><MRUDockLeftPos type="string">634</MRUDockLeftPos><MRUDockTopPos type="string">5</MRUDockTopPos><MRUDockRightPos type="string">1261</MRUDockRightPos><MRUDockBottomPos type="string">185</MRUDockBottomPos><MRUFloatStyle type="string">4</MRUFloatStyle><MRUFloatXPos type="string">-2147483648</MRUFloatXPos><MRUFloatYPos type="string">0</MRUFloatYPos><Style type="string">36740</Style><ExStyle type="string">64</ExStyle><PrevFloating type="string">False</PrevFloating><MDIChild type="string">False</MDIChild><PctWidth type="string">500000</PctWidth><MRUFloatCX type="string">300</MRUFloatCX><MRUFloatCY type="string">180</MRUFloatCY><MRUHorzDockCX type="string">627</MRUHorzDockCX><MRUHorzDockCY type="string">180</MRUHorzDockCY><MRUVertDockCX type="string">150</MRUVertDockCX><MRUVertDockCY type="string">493</MRUVertDockCY><MRUDockingState type="string">0</MRUDockingState><DockingStyle type="string">61440</DockingStyle><TypeID type="string">14948</TypeID><ClassName type="string">UDEFrameBar</ClassName><WindowName type="string">Console View</WindowName><ResourceID type="string">0</ResourceID><ViewServerInstCnt type="string">-1</ViewServerInstCnt><ViewServerMultiInst type="string">False</ViewServerMultiInst><ViewServerType type="string">StdUDECmdWin</ViewServerType><ViewServerInstName type="string">MainFrame.StdUDECmdWin.OPEN_VIEW</ViewServerInstName><ViewServerDbgSrvCfg type="string">WorkspaceManager</ViewServerDbgSrvCfg><ExDockRow type="string">0</ExDockRow><ExDockCol type="string">1</ExDockCol><ExDockHeight type="string">180</ExDockHeight><NoOfDockBars type="string">2</NoOfDockBars></Bar-15></DockState><ToolBarMgr type="key"><ToolTips type="string">True</ToolTips><CoolLook type="string">True</CoolLook><LargeButtons type="string">False</LargeButtons></ToolBarMgr></DesktopState></PersistTreeRoot><StdTargetManagerWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">06.02.2013 14:41:15:735</FrameCreated><ViewSrv type="key"><TargetBrowserView type="key"><SplitterRatio type="int">43</SplitterRatio></TargetBrowserView></ViewSrv><NETFrameMode type="int">77824</NETFrameMode><NETFrameSaveIndex type="int">2</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">1</CommonVisibilityGroup><VisibilityGroup_1 type="string">WorkspaceManager</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdTargetManagerWin><StdUDEMessageWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">14.02.2013 14:12:56:606</FrameCreated><ViewSrv type="key"><LogWin type="key"><Index type="key"><Width type="bin" size="8">MgAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Index><Type type="key"><Width type="bin" size="8">ZAAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Type><Time type="key"><Width type="bin" size="8">ZAAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Time><Src type="key"><Width type="bin" size="8">lgAAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Src><Msg type="key"><Width type="bin" size="8">6AMAAA==</Width><Visible type="bin" size="8">AQAAAA==</Visible></Msg></LogWin><CmdWin type="key"><History type="key"/></CmdWin></ViewSrv><FrameDockState type="flag">1</FrameDockState><FrameMode type="int">2</FrameMode><FrameDockBarId type="int">256</FrameDockBarId><FrameDockFloatState type="flag">1</FrameDockFloatState><NETFrameMode type="int">90113</NETFrameMode><NETFrameSaveIndex type="int">1</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">1</CommonVisibilityGroup><VisibilityGroup_1 type="string">WorkspaceManager</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdUDEMessageWin><StdUDECmdWin type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW type="key"><FrameCreated type="string">06.02.2013 12:44:29:131</FrameCreated><ViewSrv type="key"><History0 type="string"></History0><History1 type="string"></History1><History2 type="string"></History2><History3 type="string"></History3><History4 type="string"></History4><History5 type="string"></History5><History6 type="string"></History6><History7 type="string"></History7><History8 type="string"></History8><History9 type="string"></History9><History10 type="string"></History10><History11 type="string"></History11><History12 type="string"></History12><History13 type="string"></History13><History14 type="string"></History14><History15 type="string"></History15><History16 type="string"></History16><History17 type="string"></History17><History18 type="string"></History18><History19 type="string"></History19><History20 type="string"></History20><History21 type="string"></History21><History22 type="string"></History22><History23 type="string"></History23><History24 type="string"></History24><History25 type="string"></History25><History26 type="string"></History26><History27 type="string"></History27><History28 type="string"></History28><History29 type="string"></History29><History30 type="string"></History30><History31 type="string"></History31><History32 type="string"></History32><History33 type="string"></History33><History34 type="string"></History34><History35 type="string"></History35><History36 type="string"></History36><History37 type="string"></History37><History38 type="string"></History38><History39 type="string"></History39><History40 type="string"></History40><History41 type="string"></History41><History42 type="string"></History42><History43 type="string"></History43><History44 type="string"></History44><History45 type="string"></History45><History46 type="string"></History46><History47 type="string"></History47><History48 type="string"></History48><History49 type="string"></History49><History50 type="string"></History50><History51 type="string"></History51><History52 type="string"></History52><History53 type="string"></History53><History54 type="string"></History54><History55 type="string"></History55><History56 type="string"></History56><History57 type="string"></History57><History58 type="string"></History58><History59 type="string"></History59><History60 type="string"></History60><History61 type="string"></History61><History62 type="string"></History62><History63 type="string"></History63><History64 type="string"></History64><History65 type="string"></History65><History66 type="string"></History66><History67 type="string"></History67><History68 type="string"></History68><History69 type="string"></History69><History70 type="string"></History70><History71 type="string"></History71><History72 type="string"></History72><History73 type="string"></History73><History74 type="string"></History74><History75 type="string"></History75><History76 type="string"></History76><History77 type="string"></History77><History78 type="string"></History78><History79 type="string"></History79><History80 type="string"></History80><History81 type="string"></History81><History82 type="string"></History82><History83 type="string"></History83><History84 type="string"></History84><History85 type="string"></History85><History86 type="string"></History86><History87 type="string"></History87><History88 type="string"></History88><History89 type="string"></History89><History90 type="string"></History90><History91 type="string"></History91><History92 type="string"></History92><History93 type="string"></History93><History94 type="string"></History94><History95 type="string"></History95><History96 type="string"></History96><History97 type="string"></History97><History98 type="string"></History98><History99 type="string"></History99><DefParaFormat type="bin" size="156">nAAAAD8AAYAAAAAAAAAAAAAAAAAAAAAAAQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
+AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA</DefParaFormat></ViewSrv><FrameDockState type="flag">1</FrameDockState><FrameMode type="int">2</FrameMode><FrameDockBarId type="int">257</FrameDockBarId><FrameDockFloatState type="flag">1</FrameDockFloatState><NETFrameMode type="int">90112</NETFrameMode><NETFrameSaveIndex type="int">0</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">1</CommonVisibilityGroup><VisibilityGroup_1 type="string">WorkspaceManager</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW type="int">0</SAVED_VIEW></StdUDECmdWin><UDETraceWin2 type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDETraceWin2><StdUDEWspHTMLView type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEWspHTMLView><Tab_Window_Bar_0 type="key" name="Tab Window Bar 0"><ProjectOpenFlag type="flag">1</ProjectOpenFlag><FrameDockState type="flag">1</FrameDockState><ProjectLastActivePage type="int">0</ProjectLastActivePage></Tab_Window_Bar_0><Project_Workspace_Bar type="key" name="Project Workspace Bar"><ProjectOpenFlag type="flag">0</ProjectOpenFlag><FrameDockState type="flag">1</FrameDockState><ProjectLastActivePage type="int">0</ProjectLastActivePage></Project_Workspace_Bar><TraceFramework type="key"/><SelectedPrinter type="string">\\napnt002.nap.st.com\NAPPRT0001</SelectedPrinter><VisibilityGroupsMgr type="key"><Core type="key"><UsePrimaryGroup type="flag">0</UsePrimaryGroup><UseLastUsedGroup type="flag">0</UseLastUsedGroup></Core><VisibilityGroup_1 type="key"><NoOfDebugger type="int">0</NoOfDebugger><DefaultGroupName type="string">WorkspaceManager</DefaultGroupName><GroupName type="string">WorkspaceManager</GroupName><PrimaryGroup type="flag">0</PrimaryGroup><CommonGroup type="flag">1</CommonGroup></VisibilityGroup_1><VisibilityGroup_2 type="key"><Debugger_1 type="string">Core</Debugger_1><NoOfDebugger type="int">1</NoOfDebugger><DefaultGroupName type="string">Target0.Controller0.Core</DefaultGroupName><GroupName type="string">Target0.Controller0.Core</GroupName><PrimaryGroup type="flag">1</PrimaryGroup><CommonGroup type="flag">0</CommonGroup></VisibilityGroup_2><NoOfDefaultVisibilityGroups type="int">2</NoOfDefaultVisibilityGroups><NoOfVisibilityGroups type="int">2</NoOfVisibilityGroups><EnableUserSwitchOfVisibilityGroups type="flag">0</EnableUserSwitchOfVisibilityGroups><EnableDebuggerSwitchOfVisibilityGroups type="flag">0</EnableDebuggerSwitchOfVisibilityGroups><VisibilityGroupsCtrlTBCat type="int">7</VisibilityGroupsCtrlTBCat><EnableVisibilityGroups type="flag">0</EnableVisibilityGroups></VisibilityGroupsMgr><NETPlacementRoot type="key"><FormsData type="innerxml"><FormsData><Bounds><X>136</X><Y>30</Y><Width>1294</Width><Height>781</Height></Bounds><ClientSize><Width>1278</Width><Height>743</Height></ClientSize><State>Normal</State></FormsData></FormsData><DockingManagerControlData type="innerxml"><DockingManagerControlData><MDIActive>false</MDIActive><DocumentDockStyle>Top</DocumentDockStyle><DockingControls><DockingControlData><DockedDimension>1270</DockedDimension><Cancelled>false</Cancelled><DockingType>Bottom</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>1270</DockedDimension><Cancelled>false</Cancelled><DockingType>Bottom</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>1</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>true</Selected></DockingControlData><DockingControlData><DockedDimension>420</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>true</Selected></DockingControlData><DockingControlData><DockedDimension>420</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>1</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>420</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>2</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>0</DockedDimension><Cancelled>false</Cancelled><DockingType>Top</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>0</DockingIndex><PanelIndex>-1</PanelIndex><ContainerType>TabbedDocument</ContainerType><Selected>true</Selected></DockingControlData><DockingControlData><DockedDimension>420</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>3</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>420</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>4</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData><DockingControlData><DockedDimension>420</DockedDimension><Cancelled>false</Cancelled><DockingType>Left</DockingType><FloatingBounds><X>0</X><Y>0</Y><Width>0</Width><Height>0</Height></FloatingBounds><AutoHide>false</AutoHide><AutoHideByContextSwitch>false</AutoHideByContextSwitch><DockingIndex>5</DockingIndex><PanelIndex>0</PanelIndex><ContainerType>DockPanel</ContainerType><Selected>false</Selected></DockingControlData></DockingControls><LeftDockingContainerControlData><DockingContainerControlData><Tabbed>true</Tabbed><Dimension>634</Dimension></DockingContainerControlData></LeftDockingContainerControlData><RightDockingContainerControlData><DockingContainerControlData><Tabbed>false</Tabbed><Dimension>562</Dimension></DockingContainerControlData></RightDockingContainerControlData><TopDockingContainerControlData><DockingContainerControlData><Tabbed>false</Tabbed><Dimension>200</Dimension></DockingContainerControlData></TopDockingContainerControlData><BottomDockingContainerControlData><DockingContainerControlData><Tabbed>true</Tabbed><Dimension>200</Dimension></DockingContainerControlData></BottomDockingContainerControlData><TabbedDocumentContainerControlData><TabbedDocumentContainerControlData><Selected>true</Selected><SplitterSize>100</SplitterSize></TabbedDocumentContainerControlData></TabbedDocumentContainerControlData></DockingManagerControlData></DockingManagerControlData><ToolbarControlData type="innerxml"><ToolbarControlData><ShowPanelShortcuts>true</ShowPanelShortcuts><ShowToolItemMessages>true</ShowToolItemMessages><TopContainer><PanelBounds><X>0</X><Y>0</Y><Width>1278</Width><Height>74</Height></PanelBounds><ToolBars><ToolbarPersistData><Bounds><X>0</X><Y>0</Y><Width>1278</Width><Height>24</Height></Bounds><Name>Platform Main Menu</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>3</X><Y>24</Y><Width>276</Width><Height>25</Height></Bounds><Name>Macro Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x3B_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Run Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x40_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Debug Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Break Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3C_{F5FC9736-9EE3-460B-BB80-67C14C9581BF}</Name><Visible>true</Visible><Text>Reload Macro</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Ctrl_{4D5190CD-077D-4F92-B890-4545242BF32A}_UDEWorkspace</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>279</X><Y>24</Y><Width>210</Width><Height>25</Height></Bounds><Name>File Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Workspace_0x1770</Name><Visible>true</Visible><Text>New Workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1771</Name><Visible>true</Visible><Text>Open workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1772</Name><Visible>true</Visible><Text>Save workspace as</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1773</Name><Visible>true</Visible><Text>Save workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1774</Name><Visible>true</Visible><Text>Close workspace</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177F</Name><Visible>true</Visible><Text>Export view content</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x1778</Name><Visible>true</Visible><Text>Print</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Load Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>489</X><Y>24</Y><Width>95</Width><Height>25</Height></Bounds><Name>Edit Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Workspace_0x1779</Name><Visible>true</Visible><Text>Cut</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177A</Name><Visible>true</Visible><Text>Copy</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Workspace_0x177B</Name><Visible>true</Visible><Text>Paste</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>584</X><Y>24</Y><Width>440</Width><Height>25</Height></Bounds><Name>Views Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x4_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Target Browser</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x15_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Diagnostic Message Viewer</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xF_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Console</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x0_{DED51A60-E0B7-11D4-9112-0001034962B6}</Name><Visible>true</Visible><Text>CPU Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1E_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Explore Symbols</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5C_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Single Program Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5A_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Disassembly Window</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x2D_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show Special Function Register</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3C_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Locals</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x46_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Watch</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Simulated I/O</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x14_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>UDE HTML</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x19_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Array Chart</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x1B_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Time Traced Signal Chart</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x50_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>IP Trace Profiling</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x28_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Memory</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x46_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Call Stack</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>3</X><Y>49</Y><Width>141</Width><Height>25</Height></Bounds><Name>Config Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x3_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>Target Configuration</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xFE_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Connect Target</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x100_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Disconnect Target</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x6_{1C85B31A-5D25-4197-9635-9C5DC28EAFD7}</Name><Visible>true</Visible><Text>Setup Target Interface</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x12_{D8F96613-6E55-48F7-AF2A-5FCE31D103FA}</Name><Visible>true</Visible><Text>MCU Run Control</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>144</X><Y>49</Y><Width>509</Width><Height>25</Height></Bounds><Name>Debug Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_0x18_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show IP</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x5E_{27B09B6B-1CF9-4B8E-8F03-63D41538E5D2}</Name><Visible>true</Visible><Text>Show program code</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x7_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Start Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x9_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Over</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xA_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Into</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xB_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Step Out</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x8_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Run Cursor</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x321_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Break Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xD_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Reset</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xC_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Restart Program</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Breakpoints</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x6_{692DBD81-4A3F-11D2-B2CD-00A02457BF0F}</Name><Visible>true</Visible><Text>Toggle Break</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_Ctrl_{FB7BC773-88A4-4ECE-B9B6-7189610B0735}_Core</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0x3_{1C85B31A-5D25-4197-9635-9C5DC28EAFD7}</Name><Visible>true</Visible><Text>Trigger setup</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>653</X><Y>49</Y><Width>151</Width><Height>25</Height></Bounds><Name>Tools Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData><ToolItemPersistData><Name>UDE_Ctrl_{377CE046-823C-4A05-8828-13C25D345D77}_Core</Name><Visible>true</Visible><Text/><DisplayStyle>ImageAndText</DisplayStyle><AppendAccelerator>false</AppendAccelerator></ToolItemPersistData><ToolItemPersistData><Name>UDE_0xE1_{BE30DC4A-FD5D-47C1-994D-8CCEC8720E6E}</Name><Visible>true</Visible><Text>Execution Time Setup</Text><DisplayStyle>Image</DisplayStyle><AppendAccelerator>true</AppendAccelerator></ToolItemPersistData></ToolItemData></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>100</Y><Width>26</Width><Height>25</Height></Bounds><Name>Show Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>200</Y><Width>26</Width><Height>25</Height></Bounds><Name>Window Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>225</Y><Width>26</Width><Height>25</Height></Bounds><Name>Workspace Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData><ToolbarPersistData><Bounds><X>0</X><Y>275</Y><Width>26</Width><Height>25</Height></Bounds><Name>Help Toolbar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>false</Visible><ToolItemData/></ToolbarPersistData></ToolBars></TopContainer><BottomContainer><PanelBounds><X>0</X><Y>720</Y><Width>1278</Width><Height>23</Height></PanelBounds><ToolBars><ToolbarPersistData><Bounds><X>0</X><Y>0</Y><Width>1278</Width><Height>23</Height></Bounds><Name>Platform Status Bar</Name><AlwaysUnvisible>false</AlwaysUnvisible><Visible>true</Visible><ToolItemData/></ToolbarPersistData></ToolBars></BottomContainer><LeftContainer><PanelBounds><X>0</X><Y>74</Y><Width>0</Width><Height>646</Height></PanelBounds><ToolBars/></LeftContainer><RightContainer><PanelBounds><X>1278</X><Y>74</Y><Width>0</Width><Height>646</Height></PanelBounds><ToolBars/></RightContainer></ToolbarControlData></ToolbarControlData></NETPlacementRoot></MainFrame><INI_SECTION type="key"><Macro type="key"><MacroLib type="string">..\..\..\..\..\Program Files\pls\UDE 4.0\StdLibrary.mso</MacroLib></Macro><Loader type="key"><LOADER_REGKEY_WSP type="string">{866f82d3-fac5-43cd-8a82-0af01e46e2c5}</LOADER_REGKEY_WSP></Loader><System type="key"><HOMEPATH_TARGET_FILE_SYSTEM type="string">..\..\..\..\..\Documents and Settings\disiriog\My Documents\pls\UDE 4.0</HOMEPATH_TARGET_FILE_SYSTEM></System><PLACEMENT type="key"><SFRSelectDlg type="string">660,997,321,632</SFRSelectDlg></PLACEMENT><EXTRAVALUE type="key"><SFRSelectDlg type="int">0</SFRSelectDlg></EXTRAVALUE></INI_SECTION><AddOns type="key"><UDE.Script type="key"><MacroGuiEntries type="key"><LastScriptFilePath type="string">..\..\..\..\..\Documents and Settings\disiriog\My Documents\pls\UDE 4.0</LastScriptFilePath><Macro_12_06_13_09_11_23_0 type="key"><ScriptDescription type="string">The script contains a collection of macros to save memory content into different file formats 
+and fill target memory ranges</ScriptDescription><ScriptPath type="string">V:\UDE\AddOns\Macro\MacroLibrary\StdMacros1.dsm</ScriptPath><ScriptSource type="string">'	
+'	$Header: /Ude/AddOns/Macro/MacroLibrary/StdMacros.dsm 3     30.04.04 9:34 Weisses $
+'_______________________________________________________
+'
+'	universal debug engine
+'	 
+'	Standard command line macros - part 1 
+'
+'	pls Development Tools 1999-2004
+'
+'   28.04.04    SW     correction for UDE 1.10
+'   03.06.03    SW     initial version
+'_______________________________________________________
+
+'_______________________________________________________
+'
+'	UnAss command line function
+' 
+'	generates disassembly file 
+'
+'	command line UnAss output-file range1 [range2] [range3] .....
+'	range description:
+'		C:&lt;startaddress&gt;,&lt;length&gt; or	- code
+'		DB:&lt;startaddress&gt;,&lt;length&gt; or	- data byte
+'		DW:&lt;startaddress&gt;,&lt;length&gt; or	- data word
+'		DD:&lt;startaddress&gt;,&lt;length&gt; or	- data dword
+'_______________________________________________________
+
+Sub UnAss(File,ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	If IsNumeric(File) Then
+	  	MsgBox "File parameter wrong - " &amp; File
+		Exit Sub 		
+	End If
+	DisASMObj.OutputPath = CStr(File)
+	bRetVal = DisASMObj.CreateStream(True,"UDE Disassembler output of current Program",False)
+	If bRetVal = True Then
+		ParmeterCnt = ParameterObj.ParameterCount
+		If ParmeterCnt = 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		RangeCnt = ParmeterCnt/3
+		ParamIndex = 0
+		For Range = 0 To RangeCnt -1 
+			KindOfRange = CStr(ParameterObj.Parameter(ParamIndex)) 
+			KindOfRange = UCase(KindOfRange)
+			Address = CLng(ParameterObj.Parameter(ParamIndex +1))		
+			Length = CLng(ParameterObj.Parameter(ParamIndex +2))
+			ParamIndex = ParamIndex +3
+			If IsNumeric(KindOfRange) Then
+				If KindOfRange = 12 Then
+ 					DisASMObj.AddRange Address,Length,1
+				ElseIf KindOfRange = 219 Then
+ 					DisASMObj.AddRange Address,Length,2
+				ElseIf KindOfRange = 221 Then
+ 					DisASMObj.AddRange Address,Length,4
+				Else
+	  				MsgBox "Invalid range type " &amp; KindOfRange &amp;  "of range " &amp; Range +1
+					Exit Sub 		
+			 	End If
+			Else
+				If KindOfRange = "C" Then
+ 					DisASMObj.AddRange Address,Length,1
+				ElseIf KindOfRange = "DB" Then
+ 					DisASMObj.AddRange Address,Length,2
+				ElseIf KindOfRange = "DW" Then
+ 					DisASMObj.AddRange Address,Length,3
+				ElseIf KindOfRange = "DD" Then
+ 					DisASMObj.AddRange Address,Length,4
+				Else
+	  				MsgBox "Invalid range type " &amp; KindOfRange &amp;  "of range " &amp; Range +1
+					Exit Sub 		
+				End If
+			End If
+		Next
+		DisASMObj.HexFileModeFlag = False
+		DisASMObj.ListModeFlag = False
+		DisASMObj.WriteAllRanges(False)
+	End If
+
+End Sub
+
+'_______________________________________________________
+'
+'	SaveHEX command line function
+' 
+'	generates intel-HEX file 
+'
+'	command line SaveHex output-file range1 [range2] [range3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub SaveHEX(File,ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	If IsNumeric(File) Then
+	  	MsgBox "File parameter wrong - " &amp; File
+		Exit Sub 		
+	End If
+	DisASMObj.OutputPath = CStr(File)
+	bRetVal = DisASMObj.CreateStream(True,"UDE generated intel-Hex file of current Program",False)
+	If bRetVal = True Then
+		ParmeterCnt = ParameterObj.ParameterCount
+		If ParmeterCnt = 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		If ( ParmeterCnt Mod 2 ) &lt;&gt; 0 Then
+	  		MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+			Exit Sub 		
+		End If
+		RangeCnt = ParmeterCnt/2
+		ParamIndex = 0
+		For Range = 0 To RangeCnt -1 
+			Address = CLng(ParameterObj.Parameter(ParamIndex))		
+			Length = CLng(ParameterObj.Parameter(ParamIndex +1))
+			ParamIndex = ParamIndex +2
+ 			DisASMObj.AddRange Address,Length,0
+		Next
+		DisASMObj.HexFileModeFlag = True
+		DisASMObj.WriteAllRanges(False)
+	End If
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillByte command line function
+' 
+'	fills memory range with byte pattern 
+'
+'	command line FillByte range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillByte(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.ByteArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1))
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillWord command line function
+' 
+'	fills memory range with word pattern 
+'
+'	command line FillWord range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillWord(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.WordArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1)/2)
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub
+
+'_______________________________________________________
+'
+'	FillDWord command line function
+' 
+'	fills memory range with dword pattern 
+'
+'	command line FillDWord range1,pattern1 [range2,pattern2] [range3,pattern3] .....
+'	range description:
+'		&lt;startaddress&gt;,&lt;length&gt; 
+'_______________________________________________________
+
+Sub FillDWord(ParameterObj)
+
+	set debugger = workspace.Coredebugger(0)
+	set DisASMObj = debugger.DisASMObj
+	If Not IsObject(ParameterObj) Then
+	  	MsgBox "Number of parameters wrong"
+		Exit Sub 		
+	End If
+	ParmeterCnt = ParameterObj.ParameterCount
+	If ParmeterCnt = 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	If ( ParmeterCnt Mod 3 ) &lt;&gt; 0 Then
+	  	MsgBox "Number of parameters wrong " &amp; ParmeterCnt
+		Exit Sub 		
+	End If
+	RangeCnt = ParmeterCnt/3
+	ParamIndex = 0
+	set udearrayobj = debugger.DWordArrayObj(1)
+	For Range = 0 To RangeCnt -1 
+		Address = CLng(ParameterObj.Parameter(ParamIndex))		
+		Length = CLng(ParameterObj.Parameter(ParamIndex +1)/4)
+		Pattern = CLng(ParameterObj.Parameter(ParamIndex +2))
+		ParamIndex = ParamIndex +3
+		udearrayobj.Resize(Length)
+		udearrayobj.Fill(Pattern)
+		debugger.Write Address,udearrayobj
+	Next
+
+End Sub</ScriptSource><ScriptArchitecture type="int">63</ScriptArchitecture><ScriptEngine type="string">VBScript</ScriptEngine><MacroFileTime type="string">24.11.2006 14:43:20:000</MacroFileTime><ScriptFromStg type="flag">1</ScriptFromStg><LocalComputerName type="string">WS_CORE_DUO</LocalComputerName><ExternalScriptPath type="string"></ExternalScriptPath><NextNodeName type="string">Macro_14_06_13_15_04_25_0</NextNodeName><UnAss type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute UnAss ..</MenuString><ToolTipString type="string">Macro UnAss</ToolTipString><MessageString type="string">Execute macro UnAss</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">2</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></UnAss><SaveHEX type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute SaveHEX ..</MenuString><ToolTipString type="string">Macro SaveHEX</ToolTipString><MessageString type="string">Execute macro SaveHEX</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">2</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></SaveHEX><FillByte type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillByte ..</MenuString><ToolTipString type="string">Macro FillByte</ToolTipString><MessageString type="string">Execute macro FillByte</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillByte><FillWord type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillWord ..</MenuString><ToolTipString type="string">Macro FillWord</ToolTipString><MessageString type="string">Execute macro FillWord</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillWord><FillDWord type="key"><GUIEntry type="key"><MenuID type="int">10</MenuID><MenuString type="string">Execute FillDWord ..</MenuString><ToolTipString type="string">Macro FillDWord</ToolTipString><MessageString type="string">Execute macro FillDWord</MessageString><DebugFlag type="flag">0</DebugFlag></GUIEntry><FuncParameterCnt type="int">1</FuncParameterCnt><GUIEntryDescription type="string"></GUIEntryDescription></FillDWord><NoOfFunctions type="int">5</NoOfFunctions></Macro_12_06_13_09_11_23_0></MacroGuiEntries><LastSelectedMacro type="string"></LastSelectedMacro></UDE.Script></AddOns><MultiCoreRunControl type="key"><NoOfRunCtrlGroups type="int">0</NoOfRunCtrlGroups></MultiCoreRunControl><Core type="key"><ViewSrv type="key"><PowerPcCpuWin type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW type="key"><FrameCreated type="string">06.02.2013 13:47:02:754</FrameCreated><ViewSrv type="key"/><Placement type="string">1,0,0,363,1103</Placement><FrameMode type="int">3</FrameMode><FrameDockState type="flag">1</FrameDockState><FrameDockFloatState type="flag">1</FrameDockFloatState><FrameDockBarId type="int">256</FrameDockBarId><NETFrameMode type="int">77828</NETFrameMode><NETFrameSaveIndex type="int">7</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW type="int">0</SAVED_VIEW></PowerPcCpuWin><StdUDESymbolExplWin type="key"><OPEN_VIEW type="key"><FrameCreated type="string">06.02.2013 13:48:36:188</FrameCreated><ViewSrv type="key"/><NETFrameMode type="int">77827</NETFrameMode><NETFrameSaveIndex type="int">6</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><SAVED_VIEW type="int">0</SAVED_VIEW></StdUDESymbolExplWin><StdUDEProgWin type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW00 type="key"><FrameCreated type="string">11.06.2013 14:14:51:845</FrameCreated><ViewSrv type="key"/><Placement type="string">1,0,0,363,1103</Placement><FrameMode type="int">0</FrameMode><FrameDockState type="flag">0</FrameDockState><FrameDockFloatState type="flag">1</FrameDockFloatState><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">6</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt><SourceFile type="string">..\..\..\..\os\kernel\src\chsys.c</SourceFile><SourceFileInstFlag type="int">1</SourceFileInstFlag></OPEN_VIEW00><SAVED_VIEW00 type="int">1</SAVED_VIEW00><OPEN_VIEW01 type="key"><FrameCreated type="string">06.02.2013 15:16:10:495</FrameCreated><ViewSrv type="key"/><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">5</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt><SourceFile type="string">..\main.c</SourceFile><SourceFileInstFlag type="int">1</SourceFileInstFlag></OPEN_VIEW01><SAVED_VIEW01 type="int">0</SAVED_VIEW01><OPEN_VIEW02 type="key"><FrameCreated type="string">14.02.2013 11:00:49:552</FrameCreated><ViewSrv type="key"/><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">7</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt><SourceFile type="string">..\..\..\os\kernel\src\chsys.c</SourceFile></OPEN_VIEW02><OPEN_VIEW03 type="key"><FrameCreated type="string">15.02.2013 10:59:43:273</FrameCreated><ViewSrv type="key"/><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">12</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt><SourceFile type="string">..\..\..\os\various\shell.c</SourceFile></OPEN_VIEW03><SAVED_VIEW02 type="int">2</SAVED_VIEW02><SAVED_VIEW03 type="int">3</SAVED_VIEW03><OPEN_VIEW04 type="key"><FrameCreated type="string">13.02.2013 10:45:38:722</FrameCreated><ViewSrv type="key"/><SourceFile type="string">..\..\..\test\testthd.c</SourceFile><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">9</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW04><SAVED_VIEW04 type="int">4</SAVED_VIEW04><OPEN_VIEW05 type="key"><FrameCreated type="string">13.02.2013 11:35:04:648</FrameCreated><ViewSrv type="key"/><SourceFile type="string">..\..\..\os\kernel\src\chthreads.c</SourceFile><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">10</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW05><SAVED_VIEW05 type="int">5</SAVED_VIEW05></StdUDEProgWin><StdUDESFRView type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW00 type="key"><FrameCreated type="string">06.02.2013 13:47:33:227</FrameCreated><ViewSrv type="key"><SFRView type="key"><NumberOfBitFieldsPerRow type="bin" size="8">AwAAAA==</NumberOfBitFieldsPerRow><BitfieldValueMode type="bin" size="8">AQAAAA==</BitfieldValueMode><NameWidth type="bin" size="8">awAAAA==</NameWidth><ValueWidth type="bin" size="8">RwAAAA==</ValueWidth><Bitfield1Width type="bin" size="8">OgAAAA==</Bitfield1Width><Value1Width type="bin" size="8">OgAAAA==</Value1Width><Bitfield2Width type="bin" size="8">OgAAAA==</Bitfield2Width><Value2Width type="bin" size="8">OgAAAA==</Value2Width><Bitfield3Width type="bin" size="8">OgAAAA==</Bitfield3Width><Value3Width type="bin" size="8">PwAAAA==</Value3Width><Bitfield4Width type="bin" size="8">AAAAAA==</Bitfield4Width><Value4Width type="bin" size="8">AAAAAA==</Value4Width><TopIndex type="bin" size="8">AAAAAA==</TopIndex><CaretIndex type="bin" size="8">AAAAAA==</CaretIndex><Content type="key"><Name1 type="bin" size="16">TQBFAF8ARwBTAAAA</Name1><ViewMode1 type="bin" size="8">AQAAAA==</ViewMode1></Content></SFRView><LastSelectedPropPage type="string"></LastSelectedPropPage></ViewSrv><Placement type="string">1,90,85,453,682</Placement><FrameMode type="int">3</FrameMode><FrameDockState type="flag">1</FrameDockState><FrameDockFloatState type="flag">1</FrameDockFloatState><FrameDockBarId type="int">257</FrameDockBarId><DockedPlacement type="string">1,254,867,432,1163</DockedPlacement><NETFrameMode type="int">77826</NETFrameMode><NETFrameSaveIndex type="int">4</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW00><OPEN_VIEW01 type="key"/><SAVED_VIEW00 type="int">0</SAVED_VIEW00></StdUDESFRView><StdUDELocalsWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS><OPEN_VIEW type="key"><FrameCreated type="string">13.02.2013 11:36:19:974</FrameCreated><ViewSrv type="key"><NameWidth type="int">761</NameWidth><AddressWidth type="int">0</AddressWidth><ValueWidth type="int">508</ValueWidth><Value2Width type="int">0</Value2Width><MinMaxWidth type="int">0</MinMaxWidth></ViewSrv><Placement type="string">1,0,0,363,1103</Placement><FrameMode type="int">0</FrameMode><FrameDockState type="flag">0</FrameDockState><FrameDockFloatState type="flag">1</FrameDockFloatState><NETFrameMode type="int">90114</NETFrameMode><NETFrameSaveIndex type="int">3</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW type="int">0</SAVED_VIEW></StdUDELocalsWin><StdUDEWatchWin type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW00 type="key"><FrameCreated type="string">13.02.2013 10:33:12:526</FrameCreated><ViewSrv type="key"><TopIndex type="int">0</TopIndex><CaretIndex type="int">0</CaretIndex><NameWidth type="int">370</NameWidth><AddressWidth type="int">0</AddressWidth><ValueWidth type="int">247</ValueWidth><Value2Width type="int">0</Value2Width><MinMaxWidth type="int">0</MinMaxWidth><Watches type="key"><IntegralFormatForValue1 type="int">3</IntegralFormatForValue1><IntegralFormatForValue2 type="int">3</IntegralFormatForValue2><ASCIIForValue1 type="int">0</ASCIIForValue1><ASCIIForValue2 type="int">0</ASCIIForValue2><FloatFormatForValue1 type="int">3</FloatFormatForValue1><FloatFormatForValue2 type="int">3</FloatFormatForValue2></Watches></ViewSrv><NETFrameMode type="int">77825</NETFrameMode><NETFrameSaveIndex type="int">3</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW00><SAVED_VIEW00 type="int">0</SAVED_VIEW00><OPEN_VIEW01 type="key"><FrameCreated type="string">14.02.2013 14:12:30:575</FrameCreated><ViewSrv type="key"><TopIndex type="int">0</TopIndex><CaretIndex type="int">0</CaretIndex><NameWidth type="int">144</NameWidth><AddressWidth type="int">0</AddressWidth><ValueWidth type="int">96</ValueWidth><Value2Width type="int">0</Value2Width><MinMaxWidth type="int">0</MinMaxWidth></ViewSrv><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">4294967295</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW01></StdUDEWatchWin><StdUDESimIOWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDESimIOWin><StdUDEHtmlDocWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEHtmlDocWin><StdUDEGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS><OPEN_VIEW00 type="key"><FrameCreated type="string">06.02.2013 15:13:15:766</FrameCreated><ViewSrv type="key"><GraphStgNode type="key"><Comm_Mananger_GUID type="string">{6DE08EE5-E20C-42A4-896B-6821C2489841}</Comm_Mananger_GUID><InnnerColor type="string">240,240,240</InnnerColor><GraphColor type="string">255,255,255</GraphColor><DoubleBuffer type="flag">1</DoubleBuffer><ShowLegend type="flag">1</ShowLegend><Interaction type="flag">1</Interaction><SnapCursor type="flag">1</SnapCursor><SnapCursorAlways type="flag">0</SnapCursorAlways><SnapRange type="int">50</SnapRange><DrawMarkerAtCursorPos type="flag">1</DrawMarkerAtCursorPos><LegendAlignment type="int">1</LegendAlignment><PrintHeader type="string"></PrintHeader><PrintFooter type="string"></PrintFooter><NoOfCurves type="int">0</NoOfCurves><StgMode type="int">0</StgMode><StoragePath type="string"></StoragePath><GraphTitle type="string"></GraphTitle><NoOfObjects type="int">0</NoOfObjects><Mode_GUID type="string">{A9EAEABD-F574-486F-9B50-4EA4960DD2A7}</Mode_GUID><CurveGUID type="string">{1DC51D03-5E6D-4FB4-A62D-5B8A6CAAC532}</CurveGUID></GraphStgNode></ViewSrv><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">4294967295</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW00></StdUDEGraphWin><StdUDETimeSampleGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDETimeSampleGraphWin><UDEProfilingWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDEProfilingWin><StdUDEMemWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS><OPEN_VIEW00 type="key"><FrameCreated type="string">13.02.2013 11:45:30:676</FrameCreated><ViewSrv type="key"><Mode type="bin" size="8">AgAAAA==</Mode><ASCII type="bin" size="8">AQAAAA==</ASCII><AutoSize type="bin" size="8">AAAAAA==</AutoSize><Dec type="bin" size="8">AAAAAA==</Dec><Width type="bin" size="8">BAAAAA==</Width><Address type="bin" size="8">AMsAAA==</Address><AutoWrite type="int">778641452</AutoWrite><VerifyAfterWrite type="int">1684368482</VerifyAfterWrite></ViewSrv><NETFrameMode type="int">73728</NETFrameMode><NETFrameSaveIndex type="int">13</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW00><SAVED_VIEW00 type="int">0</SAVED_VIEW00></StdUDEMemWin><StdUDEIPTraceGraphWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></StdUDEIPTraceGraphWin><UDETraceCoverageWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDETraceCoverageWin><UDETraceProfilingWin type="key"><SAVED_VIEW_OBJS type="int">0</SAVED_VIEW_OBJS></UDETraceProfilingWin><UDEStackWin type="key"><SAVED_VIEW_OBJS type="int">1</SAVED_VIEW_OBJS><OPEN_VIEW type="key"><FrameCreated type="string">08.02.2013 14:45:17:544</FrameCreated><ViewSrv type="key"><_ExtentX type="bin" size="8">xT8AAA==</_ExtentX><_ExtentY type="bin" size="8">jCkAAA==</_ExtentY><_StockProps type="bin" size="8">AAAAAA==</_StockProps><Columns type="bin" size="8">AgAAAA==</Columns><ColName00 type="bin" size="8">UABDAAAA</ColName00><TypeName00 type="bin" size="8">UABDAAAA</TypeName00><Format00 type="bin" size="8">AAAAAA==</Format00><Size00 type="bin" size="8">YAAAAA==</Size00><ColName01 type="bin" size="24">RgB1AG4AYwB0AGkAbwBuAAAA</ColName01><TypeName01 type="bin" size="24">RgB1AG4AYwB0AGkAbwBuAAAA</TypeName01><Format01 type="bin" size="8">AAAAAA==</Format01><Size01 type="bin" size="8">QAYAAA==</Size01></ViewSrv><Placement type="string">1,0,0,363,1103</Placement><FrameMode type="int">0</FrameMode><FrameDockState type="flag">0</FrameDockState><FrameDockFloatState type="flag">1</FrameDockFloatState><NETFrameMode type="int">77829</NETFrameMode><NETFrameSaveIndex type="int">8</NETFrameSaveIndex><FrameUserTitle type="string"></FrameUserTitle><CommonVisibilityGroup type="flag">0</CommonVisibilityGroup><VisibilityGroup_1 type="string">Target0.Controller0.Core</VisibilityGroup_1><VisibilityGroupsCnt type="int">1</VisibilityGroupsCnt></OPEN_VIEW><SAVED_VIEW type="int">0</SAVED_VIEW></UDEStackWin></ViewSrv><UDE.StdDbgSrv type="key"><INI_SECTION type="key"><System type="key"><SINGLEPROGRAMWINDOW type="string">OFF</SINGLEPROGRAMWINDOW></System><History type="key"><ADDBRPDLG type="string">board.c [C:\ChibiStudio\chibios\boards\GENERIC_SPC56EL\board.c],__early_init,56,0x52A0</ADDBRPDLG></History></INI_SECTION><UDE.PowerPcArchSrv type="key"><UDE.PpcJtagTargIntf type="key"><NewWorkspace type="flag">0</NewWorkspace><IAC12M type="int">0</IAC12M><IAC34M type="int">0</IAC34M><DAC12M type="int">0</DAC12M><IAC1ER type="int">0</IAC1ER><IAC2ER type="int">0</IAC2ER><IAC3ER type="int">0</IAC3ER><IAC4ER type="int">0</IAC4ER><DAC1ER type="int">0</DAC1ER><DAC2ER type="int">0</DAC2ER><IAC1 type="string">0x00000000</IAC1><IAC2 type="string">0x00000000</IAC2><IAC3 type="string">0x00000000</IAC3><IAC4 type="string">0x00000000</IAC4><DAC1 type="string">0x00000000</DAC1><DAC2 type="string">0x00000000</DAC2><IAC1User type="flag">0</IAC1User><IAC1Supervisor type="flag">0</IAC1Supervisor><IAC2User type="flag">0</IAC2User><IAC2Supervisor type="flag">0</IAC2Supervisor><IAC3User type="flag">0</IAC3User><IAC3Supervisor type="flag">0</IAC3Supervisor><IAC4User type="flag">0</IAC4User><IAC4Supervisor type="flag">0</IAC4Supervisor><DAC1User type="flag">0</DAC1User><DAC1Supervisor type="flag">0</DAC1Supervisor><DAC2User type="flag">0</DAC2User><DAC2Supervisor type="flag">0</DAC2Supervisor><DAC1Rd type="flag">0</DAC1Rd><DAC1Wr type="flag">0</DAC1Wr><DAC2Rd type="flag">0</DAC2Rd><DAC2Wr type="flag">0</DAC2Wr><DAC1Valuel type="int">0x0000</DAC1Valuel><DAC1Valueh type="int">0x0000</DAC1Valueh><DAC2Valuel type="int">0x0000</DAC2Valuel><DAC2Valueh type="int">0x0000</DAC2Valueh><DAC1ValueEn type="flag">0</DAC1ValueEn><DAC2ValueEn type="flag">0</DAC2ValueEn><DVC1M type="int">0</DVC1M><DVC2M type="int">0</DVC2M><DVC1l type="int">0x0000</DVC1l><DVC1h type="int">0x0000</DVC1h><DVC2l type="int">0x0000</DVC2l><DVC2h type="int">0x0000</DVC2h><DVC1BE type="int">0x0000</DVC1BE><DVC2BE type="int">0x0000</DVC2BE><ICMPEvent type="flag">0</ICMPEvent><BRTEvent type="flag">0</BRTEvent><IRPTEvent type="flag">0</IRPTEvent><TRAPEvent type="flag">0</TRAPEvent><RETEvent type="flag">0</RETEvent><DEVT1Event type="flag">0</DEVT1Event><DEVT2Event type="flag">0</DEVT2Event><DCNT1Event type="flag">0</DCNT1Event><DCNT2Event type="flag">0</DCNT2Event><CIRPTEvent type="flag">0</CIRPTEvent><CRETEvent type="flag">0</CRETEvent><DAC1LNK type="flag">0</DAC1LNK><DAC2LNK type="flag">0</DAC2LNK><DEVT1C1 type="flag">0</DEVT1C1><DEVT2C1 type="flag">0</DEVT2C1><ICMPC1 type="flag">0</ICMPC1><IAC1C1 type="flag">0</IAC1C1><IAC2C1 type="flag">0</IAC2C1><IAC3C1 type="flag">0</IAC3C1><IAC4C1 type="flag">0</IAC4C1><DAC1RC1 type="flag">0</DAC1RC1><DAC1WC1 type="flag">0</DAC1WC1><IRPTC1 type="flag">0</IRPTC1><RETC1 type="flag">0</RETC1><DEVT1C2 type="flag">0</DEVT1C2><DEVT2C2 type="flag">0</DEVT2C2><ICMPC2 type="flag">0</ICMPC2><IAC1C2 type="flag">0</IAC1C2><IAC2C2 type="flag">0</IAC2C2><IAC3C2 type="flag">0</IAC3C2><IAC4C2 type="flag">0</IAC4C2><DAC1RC2 type="flag">0</DAC1RC2><DAC1WC2 type="flag">0</DAC1WC2><DEVT1T1 type="flag">0</DEVT1T1><DEVT2T1 type="flag">0</DEVT2T1><IAC1T1 type="flag">0</IAC1T1><IAC3T1 type="flag">0</IAC3T1><DAC1RT1 type="flag">0</DAC1RT1><DAC1WT1 type="flag">0</DAC1WT1><CNT2T1 type="flag">0</CNT2T1><CONFIG type="flag">0</CONFIG><DVC1C type="flag">0</DVC1C><DVC2C type="flag">0</DVC2C><IAC56M type="int">0</IAC56M><IAC78M type="int">0</IAC78M><IAC5ER type="int">0</IAC5ER><IAC6ER type="int">0</IAC6ER><IAC7ER type="int">0</IAC7ER><IAC8ER type="int">0</IAC8ER><IAC5 type="string">0x00000000</IAC5><IAC6 type="string">0x00000000</IAC6><IAC7 type="string">0x00000000</IAC7><IAC8 type="string">0x00000000</IAC8><IAC5User type="flag">0</IAC5User><IAC5Supervisor type="flag">0</IAC5Supervisor><IAC6User type="flag">0</IAC6User><IAC6Supervisor type="flag">0</IAC6Supervisor><IAC7User type="flag">0</IAC7User><IAC7Supervisor type="flag">0</IAC7Supervisor><IAC8User type="flag">0</IAC8User><IAC8Supervisor type="flag">0</IAC8Supervisor><IAC1XM type="int">0</IAC1XM><IAC2XM type="int">0</IAC2XM><IAC3XM type="int">0</IAC3XM><IAC4XM type="int">0</IAC4XM><IAC5XM type="int">0</IAC5XM><IAC6XM type="int">0</IAC6XM><IAC7XM type="int">0</IAC7XM><IAC8XM type="int">0</IAC8XM><DAC1XM type="int">0</DAC1XM><DAC2XM type="int">0</DAC2XM></UDE.PpcJtagTargIntf></UDE.PowerPcArchSrv><UDE.UDESymbol type="key"><DefaultBinFileDir type="string">..\build</DefaultBinFileDir><BinFileDialogParam type="key"><Filter type="int">1</Filter></BinFileDialogParam><BinaryFiles type="key"><Number type="int">1</Number><BinaryFile1 type="key"><FullPath type="string">..\build\ch.elf</FullPath><Breakpoints type="key"><Breakpoint1 type="string">Software;enabled;0;disabled;'main {C:\ChibiStudio\workspace\SPC5\demos\SPC56ELxx OS-Less Test Application\main.c} .23';main.c;1;0;;$disabled; ;disabled; ;</Breakpoint1><Number type="int">1</Number></Breakpoints></BinaryFile1><BinaryFile-1 type="key"/></BinaryFiles><PosHistory0 type="string">main</PosHistory0><PosHistory1 type="string"></PosHistory1><PosHistory2 type="string"></PosHistory2><PosHistory3 type="string"></PosHistory3><PosHistory4 type="string"></PosHistory4><PosHistory5 type="string"></PosHistory5><PosHistory6 type="string"></PosHistory6><PosHistory7 type="string"></PosHistory7><PosHistory8 type="string"></PosHistory8><PosHistory9 type="string"></PosHistory9><MultiCoreLoader type="key"><Number type="int">0</Number></MultiCoreLoader><ExpressionClipboard type="key"><Number type="int">0</Number></ExpressionClipboard></UDE.UDESymbol><STG_ADDON_PROF type="key"><UDE_Graphwin_Trace_AddOn type="key" name="UDE Graphwin Trace AddOn"><LOAD_STATE type="flag">1</LOAD_STATE></UDE_Graphwin_Trace_AddOn><UDELicense_Server type="key" name="UDELicense Server"><LOAD_STATE type="flag">1</LOAD_STATE></UDELicense_Server><UDEMemtool type="key"><LOAD_STATE type="flag">1</LOAD_STATE><FlashMod_PFLASH type="key"/><FlashMod_SHADOWFLASH type="key"/><Frontend type="key"><LastModule type="int">0</LastModule><VerifyProt type="flag">0</VerifyProt><VerifyProtFile type="string">verify.txt</VerifyProtFile><VerifyOnExit type="flag">0</VerifyOnExit><StoreLoadedSections type="flag">1</StoreLoadedSections><AutoStartProgAfterDownload type="flag">0</AutoStartProgAfterDownload><AutoCloseExecCmdDialog type="flag">0</AutoCloseExecCmdDialog><AllowOverwrite type="flag">0</AllowOverwrite></Frontend></UDEMemtool><ADD_ON_DEL_FLAG type="flag">0</ADD_ON_DEL_FLAG></STG_ADDON_PROF><CommQueueHndlStg type="key"><Beep type="flag">0</Beep><Retry type="flag">0</Retry><RetryPeriod type="int">0</RetryPeriod></CommQueueHndlStg><TargetStateHndlStg type="key"/><LastSelectedPropPage type="string"></LastSelectedPropPage></UDE.StdDbgSrv><MRUSourceFileList type="key"><NoOfMRUSrcFileEntries type="int">1</NoOfMRUSrcFileEntries><MRUSrcFile0 type="string">..\main.c</MRUSrcFile0></MRUSourceFileList></Core><TargetInfoFile type="string">stm_xpc56el_minimodule_lockstep_debug_jtag.cfg</TargetInfoFile><LastWriteDate type="string">14.06.2013 15:04:24:999</LastWriteDate></stg>
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/UDE/stm_xpc56el_minimodule_lockstep_debug_jtag.cfg b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/UDE/stm_xpc56el_minimodule_lockstep_debug_jtag.cfg
new file mode 100644
index 0000000..87117b4
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/UDE/stm_xpc56el_minimodule_lockstep_debug_jtag.cfg
@@ -0,0 +1,188 @@
+[Main]
+Signature=UDE_TARGINFO_2.0
+Description=STM XPC56XL Mini Module with SPC56EL60, Lockstep mode (Jtag)
+Description1=MMU preinitialized, memory mapping 1:1, VLE enabled
+Description2=FLASH programming prepared but not enabled
+Description2=PLL init sequence for 80MHz
+Description3=Write Filter for BAM Module
+MCUs=Controller0
+Architecture=PowerPC
+Vendor=STM
+Board=XPC56XL Mini Module
+
+[Controller0]
+Family=PowerPC
+Type=SPC56EL60
+Enabled=1
+IntClock=80000
+MemDevs=BAMWriteFilter
+ExtClock=40000
+
+[Controller0.Core]
+Protocol=PPCJTAG
+Enabled=1
+ExecuteOpcodeAddr=0x00000000
+
+[Controller0.Core.LoadedAddOn]
+UDEMemtool=1
+
+[Controller0.Core.PpcJtagTargIntf]
+PortType=FTDI
+ResetWaitTime=50
+MaxJtagClk=5000
+DoSramInit=1
+UseNexus=1
+AdaptiveJtagPhaseShift=1
+ConnOption=Reset
+ChangeJtagClk=-1
+HaltAfterReset=1
+SimioAddr=g_JtagSimioAccess
+FreezeTimers=1
+InvalidTlbOnReset=1
+InvalidateCache=1
+ForceCacheFlush=1
+IgnoreLockedLines=0
+ExecInitCmds=1
+JtagTapNumber=0
+JtagNumOfTaps=1
+JtagNumIrBefore=0
+JtagNumIrAfter=0
+SimioAddr=g_JtagSimioAccess
+FlushCache=0
+AllowMmuSetup=0
+UseExtReset=0
+HandleWdtBug=0
+ForceEndOfReset=0
+JtagViaPod=1
+AllowResetOnCheck=0
+TargetPort=Default
+ChangeMsr=0
+ChangeMsrValue=0x0
+ExecOnStartCmds=0
+ExecOnHaltCmds=0
+EnableProgramTimeMeasurement=0
+UseHwResetMode=1
+CommDevSel=PortType=USB,Type=FTDI
+HandleNexusAccessBug=0
+DoNotEnableTrapSwBrp=0
+BootPasswd0=0xFEEDFACE
+BootPasswd1=0xCAFEBEEF
+BootPasswd2=0xFFFFFFFF
+BootPasswd3=0xFFFFFFFF
+BootPasswd4=0xFFFFFFFF
+BootPasswd5=0xFFFFFFFF
+BootPasswd6=0xFFFFFFFF
+BootPasswd7=0xFFFFFFFF
+JtagIoType=Jtag
+ExecOnHaltCmdsWhileHalted=0
+TimerForPTM=Default
+AllowBreakOnUpdateBreakpoints=0
+ClearDebugStatusOnHalt=1
+HwResetMode=Simulate
+UseMasterNexusIfResetState=1
+UseLocalAddressTranslation=1
+Use64BitNexus=0
+InitSramOnlyWhenNotInitialized=0
+DisableE2EECC=0
+AllowHarrForUpdateDebugRegs=0
+UseCore0ForNexusMemoryAccessWhileRunning=0
+
+[Controller0.BAMWriteFilter]
+Description=BAM WriteAccess Filter
+Range0Start=0xFFFFC000
+Range0Size=0x4000
+Enabled=1
+Handler=AccessFilter
+Mode=ReadOnly
+
+[Controller0.PFLASH]
+Enabled=1
+EnableMemtoolByDefault=1
+
+[Controller0.Core.PpcJtagTargIntf.InitScript]
+// disable watchdog
+SET SWT_SR 0xC520
+SET SWT_SR 0xD928
+SET SWT_CR 0xFF00000A
+
+// select TLB 1
+SETSPR 0x274 0x10000108 0xFFFFFFFF
+
+// programm internal flash
+// TLB 1, entry 0
+SETSPR 0x270 0x10000000 0xFFFFFFFF
+// Valid, protect against invalidation, global entry, size=16MB
+SETSPR 0x271 0xC0000700 0xFFFFFFFF
+// effective page number 00000000, I,G
+SETSPR 0x272 0x00000028 0xFFFFFFFF
+// real page 00000000, UX,SX,UW,SW,UR,SR
+SETSPR 0x273 0x0000003F 0xFFFFFFFF
+// execute TLB write instruction
+EXECOPCODE 0x7C0007A4
+
+// programm internal SRAM
+// TLB 1, entry 1
+SETSPR 0x270 0x10010000 0xFFFFFFFF
+// Valid, protect against invalidation, global entry, size=16MB
+SETSPR 0x271 0xC0000700 0xFFFFFFFF
+// effective page number 40000000 I,G
+SETSPR 0x272 0x40000028 0xFFFFFFFF
+// real page 40000000, UX,SX,UW,SW,UR,SR
+SETSPR 0x273 0x4000003F 0xFFFFFFFF
+// execute TLB write instruction
+EXECOPCODE 0x7C0007A4
+
+// programm On plattform 1 peripherals
+// TLB 1, entry 2
+SETSPR 0x270 0x10020000 0xFFFFFFFF
+// Valid, protect against invalidation, global entry, size=1MB
+SETSPR 0x271 0xC0000500 0xFFFFFFFF
+// effective page number 8FF00000, I,G
+SETSPR 0x272 0x8FF00008 0xFFFFFFFF
+// real page 8FF00000, UX,SX,UW,SW,UR,SR
+SETSPR 0x273 0x8FF0003F 0xFFFFFFFF
+// execute TLB write instruction
+EXECOPCODE 0x7C0007A4
+
+// programm peripheral A modules
+// TLB 1, entry 3
+SETSPR 0x270 0x10030000 0xFFFFFFFF
+// Valid, protect against invalidation, global entry, size=1MB
+SETSPR 0x271 0xC0000500 0xFFFFFFFF
+// effective page number C3F00000, I
+SETSPR 0x272 0xC3F0000A 0xFFFFFFFF
+// real page C3F00000, UX,SX,UW,SW,UR,SR
+SETSPR 0x273 0xC3F0003F 0xFFFFFFFF
+// execute TLB write instruction
+EXECOPCODE 0x7C0007A4
+
+// programm Off plattform peripherals
+// TLB 1, entry 4
+SETSPR 0x270 0x10040000 0xFFFFFFFF
+// Valid, protect against invalidation, global entry, size=1MB
+SETSPR 0x271 0xC0000500 0xFFFFFFFF
+// effective page number FFE00000, I
+SETSPR 0x272 0xFFE00008 0xFFFFFFFF
+// real page FFE00000, UX,SX,UW,SW,UR,SR
+SETSPR 0x273 0xFFE0003F 0xFFFFFFFF
+// execute TLB write instruction
+EXECOPCODE 0x7C0007A4
+
+// programm On plattform 0 peripherals
+// TLB 1, entry 5
+SETSPR 0x270 0x10050000 0xFFFFFFFF
+// Valid, protect against invalidation, global entry, size=1MB
+SETSPR 0x271 0xC0000500 0xFFFFFFFF
+// effective page number FFF00000, I
+SETSPR 0x272 0xFFF00028 0xFFFFFFFF
+// real page FFF00000, UX,SX,UW,SW,UR,SR
+SETSPR 0x273 0xFFF0003F 0xFFFFFFFF
+// execute TLB write instruction
+EXECOPCODE 0x7C0007A4
+
+// clear fault status
+SET16 RGM_FES 0xFFFF
+[Controller0.Core.PpcJtagTargIntf.OnStartScript]
+
+[Controller0.Core.PpcJtagTargIntf.OnHaltScript]
+
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/chconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/chconf.h
new file mode 100644
index 0000000..f6244ad
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/halconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/halconf.h
new file mode 100644
index 0000000..6827953
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/halconf.h
@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM                  FALSE
+#endif
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/main.c b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/main.c
new file mode 100644
index 0000000..1806961
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/main.c
@@ -0,0 +1,202 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+#include "shell.h"
+#include "chprintf.h"
+
+#define SHELL_WA_SIZE   THD_WORKING_AREA_SIZE(1024)
+#define TEST_WA_SIZE    THD_WORKING_AREA_SIZE(256)
+
+static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
+  size_t n, size;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: mem\r\n");
+    return;
+  }
+  n = chHeapStatus(NULL, &size);
+  chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX());
+  chprintf(chp, "heap fragments   : %u\r\n", n);
+  chprintf(chp, "heap free total  : %u bytes\r\n", size);
+}
+
+static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
+  static const char *states[] = {CH_STATE_NAMES};
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: threads\r\n");
+    return;
+  }
+  chprintf(chp, "    addr    stack prio refs     state time\r\n");
+  tp = chRegFirstThread();
+  do {
+    chprintf(chp, "%08lx %08lx %4lu %4lu %9s\r\n",
+            (uint32_t)tp, (uint32_t)tp->p_ctx.sp,
+            (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
+            states[tp->p_state]);
+    tp = chRegNextThread(tp);
+  } while (tp != NULL);
+}
+
+static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: test\r\n");
+    return;
+  }
+  tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(),
+                           TestThread, chp);
+  if (tp == NULL) {
+    chprintf(chp, "out of memory\r\n");
+    return;
+  }
+  chThdWait(tp);
+}
+
+static const ShellCommand commands[] = {
+  {"mem", cmd_mem},
+  {"threads", cmd_threads},
+  {"test", cmd_test},
+  {NULL, NULL}
+};
+
+static const ShellConfig shell_cfg1 = {
+  (BaseSequentialStream *)&SD1,
+  commands
+};
+
+/*
+ * LEDs blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+
+  while (true) {
+    unsigned i;
+
+    for (i = 0; i < 4; i++) {
+      palClearPad(PORT_D, PD_LED1);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT_D, PD_LED2);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT_D, PD_LED3);
+      chThdSleepMilliseconds(100);
+      palClearPad(PORT_D, PD_LED4);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_D, PD_LED1);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_D, PD_LED2);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_D, PD_LED3);
+      chThdSleepMilliseconds(100);
+      palSetPad(PORT_D, PD_LED4);
+      chThdSleepMilliseconds(300);
+    }
+
+    for (i = 0; i < 4; i++) {
+      palTogglePort(PORT_D, PAL_PORT_BIT(PD_LED1) | PAL_PORT_BIT(PD_LED2) |
+                            PAL_PORT_BIT(PD_LED3) | PAL_PORT_BIT(PD_LED4));
+      chThdSleepMilliseconds(500);
+      palTogglePort(PORT_D, PAL_PORT_BIT(PD_LED1) | PAL_PORT_BIT(PD_LED2) |
+                            PAL_PORT_BIT(PD_LED3) | PAL_PORT_BIT(PD_LED4));
+      chThdSleepMilliseconds(500);
+    }
+
+    for (i = 0; i < 4; i++) {
+      palTogglePad(PORT_D, PD_LED1);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_D, PD_LED1);
+      palTogglePad(PORT_D, PD_LED2);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_D, PD_LED2);
+      palTogglePad(PORT_D, PD_LED3);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_D, PD_LED3);
+      palTogglePad(PORT_D, PD_LED4);
+      chThdSleepMilliseconds(250);
+      palTogglePad(PORT_D, PD_LED4);
+    }
+
+    for (i = 0; i < 4; i++) {
+      palClearPort(PORT_D, PAL_PORT_BIT(PD_LED1) | PAL_PORT_BIT(PD_LED3));
+      palSetPort(PORT_D, PAL_PORT_BIT(PD_LED2) | PAL_PORT_BIT(PD_LED4));
+      chThdSleepMilliseconds(500);
+      palClearPort(PORT_D, PAL_PORT_BIT(PD_LED2) | PAL_PORT_BIT(PD_LED4));
+      palSetPort(PORT_D, PAL_PORT_BIT(PD_LED1) | PAL_PORT_BIT(PD_LED3));
+      chThdSleepMilliseconds(500);
+    }
+
+    palSetPort(PORT_D, PAL_PORT_BIT(PD_LED1) | PAL_PORT_BIT(PD_LED2) |
+                       PAL_PORT_BIT(PD_LED3) | PAL_PORT_BIT(PD_LED4));
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+  thread_t *shelltp = NULL;
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Shell manager initialization.
+   */
+  shellInit();
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   */
+  sdStart(&SD1, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity.
+   */
+  while (true) {
+    if (!shelltp)
+      shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
+    else if (chThdTerminatedX(shelltp)) {
+      chThdRelease(shelltp);    /* Recovers memory of the previous shell.   */
+      shelltp = NULL;           /* Triggers spawning of a new shell.        */
+    }
+    chThdSleepMilliseconds(1000);
+  }
+  return 0;
+}
diff --git a/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/mcuconf.h b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/mcuconf.h
new file mode 100644
index 0000000..bf28f09
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/SPC5/RT-SPC56EL-EVB/mcuconf.h
@@ -0,0 +1,294 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * SPC56ELxx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 1...15       Lowest...Highest.
+ * DMA priorities:
+ * 0...15       Highest...Lowest.
+ */
+
+#define SPC56ELxx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define SPC5_NO_INIT                        FALSE
+#define SPC5_ALLOW_OVERCLOCK                FALSE
+#define SPC5_DISABLE_WATCHDOG               TRUE
+#define SPC5_FMPLL0_CLK_SRC                 SPC5_FMPLL_SRC_XOSC
+#define SPC5_FMPLL0_IDF_VALUE               5
+#define SPC5_FMPLL0_NDIV_VALUE              60
+#define SPC5_FMPLL0_ODF                     SPC5_FMPLL_ODF_DIV4
+#define SPC5_FMPLL1_CLK_SRC                 SPC5_FMPLL_SRC_XOSC
+#define SPC5_FMPLL1_IDF_VALUE               5
+#define SPC5_FMPLL1_NDIV_VALUE              60
+#define SPC5_FMPLL1_ODF                     SPC5_FMPLL_ODF_DIV4
+#define SPC5_SYSCLK_DIVIDER_VALUE           2
+#define SPC5_AUX0CLK_SRC                    SPC5_CGM_SS_FMPLL1
+#define SPC5_MCONTROL_DIVIDER_VALUE         15
+#define SPC5_SWG_DIVIDER_VALUE              2
+#define SPC5_AUX1CLK_SRC                    SPC5_CGM_SS_FMPLL1
+#define SPC5_FLEXRAY_DIVIDER_VALUE          2
+#define SPC5_AUX2CLK_SRC                    SPC5_CGM_SS_FMPLL1
+#define SPC5_FLEXCAN_DIVIDER_VALUE          2
+#define SPC5_ME_ME_BITS                     (SPC5_ME_ME_RUN1 |              \
+                                             SPC5_ME_ME_RUN2 |              \
+                                             SPC5_ME_ME_RUN3 |              \
+                                             SPC5_ME_ME_HALT0 |             \
+                                             SPC5_ME_ME_STOP0)
+#define SPC5_ME_SAFE_MC_BITS                (SPC5_ME_MC_PDO)
+#define SPC5_ME_DRUN_MC_BITS                (SPC5_ME_MC_SYSCLK_FMPLL0 |     \
+                                             SPC5_ME_MC_IRCON |             \
+                                             SPC5_ME_MC_XOSC0ON |           \
+                                             SPC5_ME_MC_PLL0ON |            \
+                                             SPC5_ME_MC_PLL1ON |            \
+                                             SPC5_ME_MC_FLAON_NORMAL |      \
+                                             SPC5_ME_MC_MVRON)
+#define SPC5_ME_RUN0_MC_BITS                (SPC5_ME_MC_SYSCLK_FMPLL0 |     \
+                                             SPC5_ME_MC_IRCON |             \
+                                             SPC5_ME_MC_XOSC0ON |           \
+                                             SPC5_ME_MC_PLL0ON |            \
+                                             SPC5_ME_MC_PLL1ON |            \
+                                             SPC5_ME_MC_FLAON_NORMAL |      \
+                                             SPC5_ME_MC_MVRON)
+#define SPC5_ME_RUN1_MC_BITS                (SPC5_ME_MC_SYSCLK_FMPLL0 |     \
+                                             SPC5_ME_MC_IRCON |             \
+                                             SPC5_ME_MC_XOSC0ON |           \
+                                             SPC5_ME_MC_PLL0ON |            \
+                                             SPC5_ME_MC_PLL1ON |            \
+                                             SPC5_ME_MC_FLAON_NORMAL |      \
+                                             SPC5_ME_MC_MVRON)
+#define SPC5_ME_RUN2_MC_BITS                (SPC5_ME_MC_SYSCLK_FMPLL0 |     \
+                                             SPC5_ME_MC_IRCON |             \
+                                             SPC5_ME_MC_XOSC0ON |           \
+                                             SPC5_ME_MC_PLL0ON |            \
+                                             SPC5_ME_MC_PLL1ON |            \
+                                             SPC5_ME_MC_FLAON_NORMAL |      \
+                                             SPC5_ME_MC_MVRON)
+#define SPC5_ME_RUN3_MC_BITS                (SPC5_ME_MC_SYSCLK_FMPLL0 |     \
+                                             SPC5_ME_MC_IRCON |             \
+                                             SPC5_ME_MC_XOSC0ON |           \
+                                             SPC5_ME_MC_PLL0ON |            \
+                                             SPC5_ME_MC_PLL1ON |            \
+                                             SPC5_ME_MC_FLAON_NORMAL |      \
+                                             SPC5_ME_MC_MVRON)
+#define SPC5_ME_HALT0_MC_BITS               (SPC5_ME_MC_SYSCLK_FMPLL0 |     \
+                                             SPC5_ME_MC_IRCON |             \
+                                             SPC5_ME_MC_XOSC0ON |           \
+                                             SPC5_ME_MC_PLL0ON |            \
+                                             SPC5_ME_MC_PLL1ON |            \
+                                             SPC5_ME_MC_FLAON_NORMAL |      \
+                                             SPC5_ME_MC_MVRON)
+#define SPC5_ME_STOP0_MC_BITS               (SPC5_ME_MC_SYSCLK_FMPLL0 |     \
+                                             SPC5_ME_MC_IRCON |             \
+                                             SPC5_ME_MC_XOSC0ON |           \
+                                             SPC5_ME_MC_PLL0ON |            \
+                                             SPC5_ME_MC_PLL1ON |            \
+                                             SPC5_ME_MC_FLAON_NORMAL |      \
+                                             SPC5_ME_MC_MVRON)
+#define SPC5_ME_RUN_PC3_BITS                (SPC5_ME_RUN_PC_RUN0 |          \
+                                             SPC5_ME_RUN_PC_RUN1 |          \
+                                             SPC5_ME_RUN_PC_RUN2 |          \
+                                             SPC5_ME_RUN_PC_RUN3)
+#define SPC5_ME_RUN_PC4_BITS                (SPC5_ME_RUN_PC_RUN0 |          \
+                                             SPC5_ME_RUN_PC_RUN1 |          \
+                                             SPC5_ME_RUN_PC_RUN2 |          \
+                                             SPC5_ME_RUN_PC_RUN3)
+#define SPC5_ME_RUN_PC5_BITS                (SPC5_ME_RUN_PC_RUN0 |          \
+                                             SPC5_ME_RUN_PC_RUN1 |          \
+                                             SPC5_ME_RUN_PC_RUN2 |          \
+                                             SPC5_ME_RUN_PC_RUN3)
+#define SPC5_ME_RUN_PC6_BITS                (SPC5_ME_RUN_PC_RUN0 |          \
+                                             SPC5_ME_RUN_PC_RUN1 |          \
+                                             SPC5_ME_RUN_PC_RUN2 |          \
+                                             SPC5_ME_RUN_PC_RUN3)
+#define SPC5_ME_RUN_PC7_BITS                (SPC5_ME_RUN_PC_RUN0 |          \
+                                             SPC5_ME_RUN_PC_RUN1 |          \
+                                             SPC5_ME_RUN_PC_RUN2 |          \
+                                             SPC5_ME_RUN_PC_RUN3)
+#define SPC5_ME_LP_PC4_BITS                 (SPC5_ME_LP_PC_HALT0 |          \
+                                             SPC5_ME_LP_PC_STOP0)
+#define SPC5_ME_LP_PC5_BITS                 (SPC5_ME_LP_PC_HALT0 |          \
+                                             SPC5_ME_LP_PC_STOP0)
+#define SPC5_ME_LP_PC6_BITS                 (SPC5_ME_LP_PC_HALT0 |          \
+                                             SPC5_ME_LP_PC_STOP0)
+#define SPC5_ME_LP_PC7_BITS                 (SPC5_ME_LP_PC_HALT0 |          \
+                                             SPC5_ME_LP_PC_STOP0)
+#define SPC5_CLOCK_FAILURE_HOOK()           chSysHalt("Clock failure")
+
+/*
+ * EDMA driver settings.
+ */
+#define SPC5_EDMA_CR_SETTING                0
+#define SPC5_EDMA_GROUP0_PRIORITIES                                         \
+  0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
+#define SPC5_EDMA_ERROR_IRQ_PRIO            12
+#define SPC5_EDMA_ERROR_HANDLER()           chSysHalt("DMA failure")
+
+/*
+ * SERIAL driver system settings.
+ */
+#define SPC5_SERIAL_USE_LINFLEX0            TRUE
+#define SPC5_SERIAL_USE_LINFLEX1            TRUE
+#define SPC5_SERIAL_LINFLEX0_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX1_PRIORITY       8
+#define SPC5_SERIAL_LINFLEX0_START_PCTL     (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_SERIAL_LINFLEX0_STOP_PCTL      (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+#define SPC5_SERIAL_LINFLEX1_START_PCTL     (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_SERIAL_LINFLEX1_STOP_PCTL      (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+/*
+ * PWM driver system settings.
+ */
+#define SPC5_PWM_USE_SMOD0                  FALSE
+#define SPC5_PWM_USE_SMOD1                  FALSE
+#define SPC5_PWM_USE_SMOD2                  FALSE
+#define SPC5_PWM_USE_SMOD3                  FALSE
+#define SPC5_PWM_SMOD0_PRIORITY             7
+#define SPC5_PWM_SMOD1_PRIORITY             7
+#define SPC5_PWM_SMOD2_PRIORITY             7
+#define SPC5_PWM_SMOD3_PRIORITY             7
+#define SPC5_PWM_FLEXPWM0_START_PCTL        (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_PWM_FLEXPWM0_STOP_PCTL         (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#define SPC5_PWM_USE_SMOD4                  FALSE
+#define SPC5_PWM_USE_SMOD5                  FALSE
+#define SPC5_PWM_USE_SMOD6                  FALSE
+#define SPC5_PWM_USE_SMOD7                  FALSE
+#define SPC5_PWM_SMOD4_PRIORITY             7
+#define SPC5_PWM_SMOD5_PRIORITY             7
+#define SPC5_PWM_SMOD6_PRIORITY             7
+#define SPC5_PWM_SMOD7_PRIORITY             7
+#define SPC5_PWM_FLEXPWM1_START_PCTL        (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_PWM_FLEXPWM1_STOP_PCTL         (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+/*
+ * ICU driver system settings.
+ */
+#define SPC5_ICU_USE_SMOD0                  FALSE
+#define SPC5_ICU_USE_SMOD1                  FALSE
+#define SPC5_ICU_USE_SMOD2                  FALSE
+#define SPC5_ICU_USE_SMOD3                  FALSE
+#define SPC5_ICU_USE_SMOD4                  FALSE
+#define SPC5_ICU_USE_SMOD5                  FALSE
+#define SPC5_ICU_ETIMER0_PRIORITY           7
+#define SPC5_ICU_ETIMER0_START_PCTL         (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_ICU_ETIMER0_STOP_PCTL          (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#define SPC5_ICU_USE_SMOD6                  FALSE
+#define SPC5_ICU_USE_SMOD7                  FALSE
+#define SPC5_ICU_USE_SMOD8                  FALSE
+#define SPC5_ICU_USE_SMOD9                  FALSE
+#define SPC5_ICU_USE_SMOD10                 FALSE
+#define SPC5_ICU_USE_SMOD11                 FALSE
+#define SPC5_ICU_ETIMER1_PRIORITY           7
+#define SPC5_ICU_ETIMER1_START_PCTL         (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_ICU_ETIMER1_STOP_PCTL          (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#define SPC5_ICU_USE_SMOD12                 FALSE
+#define SPC5_ICU_USE_SMOD13                 FALSE
+#define SPC5_ICU_USE_SMOD14                 FALSE
+#define SPC5_ICU_USE_SMOD15                 FALSE
+#define SPC5_ICU_USE_SMOD16                 FALSE
+#define SPC5_ICU_USE_SMOD17                 FALSE
+#define SPC5_ICU_ETIMER2_PRIORITY           7
+#define SPC5_ICU_ETIMER2_START_PCTL         (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_ICU_ETIMER2_STOP_PCTL          (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+/*
+ * SPI driver system settings.
+ */
+#define SPC5_SPI_USE_DSPI0                  FALSE
+#define SPC5_SPI_USE_DSPI1                  FALSE
+#define SPC5_SPI_USE_DSPI2                  FALSE
+#define SPC5_SPI_DSPI0_MCR                  (SPC5_MCR_PCSIS0 |              \
+                                             SPC5_MCR_PCSIS1 |              \
+                                             SPC5_MCR_PCSIS2 |              \
+                                             SPC5_MCR_PCSIS3 |              \
+                                             SPC5_MCR_PCSIS4 |              \
+                                             SPC5_MCR_PCSIS5 |              \
+                                             SPC5_MCR_PCSIS6 |              \
+                                             SPC5_MCR_PCSIS7)
+#define SPC5_SPI_DSPI1_MCR                  (SPC5_MCR_PCSIS0 |              \
+                                             SPC5_MCR_PCSIS1 |              \
+                                             SPC5_MCR_PCSIS2 |              \
+                                             SPC5_MCR_PCSIS3 |              \
+                                             SPC5_MCR_PCSIS4 |              \
+                                             SPC5_MCR_PCSIS5 |              \
+                                             SPC5_MCR_PCSIS6 |              \
+                                             SPC5_MCR_PCSIS7)
+#define SPC5_SPI_DSPI2_MCR                  (SPC5_MCR_PCSIS0 |              \
+                                             SPC5_MCR_PCSIS1 |              \
+                                             SPC5_MCR_PCSIS2 |              \
+                                             SPC5_MCR_PCSIS3 |              \
+                                             SPC5_MCR_PCSIS4 |              \
+                                             SPC5_MCR_PCSIS5 |              \
+                                             SPC5_MCR_PCSIS6 |              \
+                                             SPC5_MCR_PCSIS7)
+#define SPC5_SPI_DSPI0_TX1_DMA_CH_ID        4
+#define SPC5_SPI_DSPI0_TX2_DMA_CH_ID        5
+#define SPC5_SPI_DSPI0_RX_DMA_CH_ID         6
+#define SPC5_SPI_DSPI1_TX1_DMA_CH_ID        7
+#define SPC5_SPI_DSPI1_TX2_DMA_CH_ID        8
+#define SPC5_SPI_DSPI1_RX_DMA_CH_ID         9
+#define SPC5_SPI_DSPI2_TX1_DMA_CH_ID        10
+#define SPC5_SPI_DSPI2_TX2_DMA_CH_ID        11
+#define SPC5_SPI_DSPI2_RX_DMA_CH_ID         12
+#define SPC5_SPI_DSPI0_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI1_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI2_DMA_IRQ_PRIO         10
+#define SPC5_SPI_DSPI0_IRQ_PRIO             10
+#define SPC5_SPI_DSPI1_IRQ_PRIO             10
+#define SPC5_SPI_DSPI2_IRQ_PRIO             10
+#define SPC5_SPI_DMA_ERROR_HOOK(spip)       chSysHalt("DMA failure")
+#define SPC5_SPI_DSPI0_START_PCTL           (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_SPI_DSPI0_STOP_PCTL            (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+#define SPC5_SPI_DSPI1_START_PCTL           (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_SPI_DSPI1_STOP_PCTL            (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+#define SPC5_SPI_DSPI2_START_PCTL           (SPC5_ME_PCTL_RUN(1) |          \
+                                             SPC5_ME_PCTL_LP(2))
+#define SPC5_SPI_DSPI2_STOP_PCTL            (SPC5_ME_PCTL_RUN(0) |          \
+                                             SPC5_ME_PCTL_LP(0))
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/.cproject b/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/.cproject
new file mode 100644
index 0000000..8dd00cf
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/.cproject
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.114656749">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.114656749." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="CMSIS-STM32F407-DISCOVERY.null.1703860681" name="CMSIS-STM32F407-DISCOVERY"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.114656749">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/CMSIS-STM32F407-DISCOVERY"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/.project b/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/.project
new file mode 100644
index 0000000..bb34c97
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/.project
@@ -0,0 +1,95 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>CMSIS-STM32F407-DISCOVERY</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value>-j1</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>true</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/Makefile b/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/Makefile
new file mode 100644
index 0000000..91b9054
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/Makefile
@@ -0,0 +1,218 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/cmsis_os/cmsis_os.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       $(CMSISRTOSSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CMSISRTOSINC) $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/chconf.h b/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/chconf.h
new file mode 100644
index 0000000..7d99062
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/debug/CMSIS-STM32F407-DISCOVERY (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/debug/CMSIS-STM32F407-DISCOVERY (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..34e4692
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/debug/CMSIS-STM32F407-DISCOVERY (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\CMSIS-STM32F407-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="CMSIS-STM32F407-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/CMSIS-STM32F407-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/halconf.h b/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/main.c b/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/main.c
new file mode 100644
index 0000000..ccc1f60
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/main.c
@@ -0,0 +1,74 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+#include "cmsis_os.h"
+
+/*
+ * This is a periodic thread that does absolutely nothing except flashing
+ * a LED.
+ */
+static void Thread1(void const *arg) {
+
+  (void)arg;
+
+  while (true) {
+    palSetPad(GPIOD, GPIOD_LED3);       /* Orange.  */
+    osDelay(500);
+    palClearPad(GPIOD, GPIOD_LED3);     /* Orange.  */
+    osDelay(500);
+  }
+}
+
+/*
+ * Thread definition block.
+ */
+osThreadDef(Thread1, osPriorityAboveNormal, 128);
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /* HAL initialization, this also initializes the configured device drivers
+     and performs the board-specific initializations.*/
+  halInit();
+
+  /* The kernel is initialized but not started yet, this means that
+     main() is executing with absolute priority but interrupts are
+     already enabled.*/
+  osKernelInitialize();
+
+  /* Activates the serial driver 2 using the driver default configuration.
+    PA2(TX) and PA3(RX) are routed to USART2.*/
+  sdStart(&SD2, NULL);
+  palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7));
+  palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7));
+
+  /* Creates the example thread, it does not start immediately.*/
+  osThreadCreate(osThread(Thread1), NULL);
+
+  /* Kernel started, the main() thread has priority osPriorityNormal
+     by default.*/
+  osKernelStart();
+
+  /* In the ChibiOS/RT CMSIS RTOS implementation the main() is an
+     usable thread, here we just sleep in a loop printing a message.*/
+  while (true) {
+    sdWrite(&SD2, (uint8_t *)"Hello World!\r\n", 14);
+    osDelay(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/mcuconf.h
new file mode 100644
index 0000000..e0aa520
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/mcuconf.h
@@ -0,0 +1,327 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F4xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_CLOCK48_REQUIRED              TRUE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLM_VALUE                    8
+#define STM32_PLLN_VALUE                    336
+#define STM32_PLLP_VALUE                    2
+#define STM32_PLLQ_VALUE                    7
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV4
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_RTCPRE_VALUE                  8
+#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5
+#define STM32_I2SSRC                        STM32_I2SSRC_CKIN
+#define STM32_PLLI2SN_VALUE                 192
+#define STM32_PLLI2SR_VALUE                 5
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE                 FALSE
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_USE_CAN2                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+#define STM32_CAN_CAN2_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              FALSE
+#define STM32_DAC_USE_DAC1_CH2              FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH1_DMA_STREAM       STM32_DMA_STREAM_ID(1, 5)
+#define STM32_DAC_DAC1_CH2_DMA_STREAM       STM32_DMA_STREAM_ID(1, 6)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI22_IRQ_PRIORITY       15
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_USE_TIM9                  FALSE
+#define STM32_GPT_USE_TIM11                 FALSE
+#define STM32_GPT_USE_TIM12                 FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+#define STM32_GPT_TIM9_IRQ_PRIORITY         7
+#define STM32_GPT_TIM11_IRQ_PRIORITY        7
+#define STM32_GPT_TIM12_IRQ_PRIORITY        7
+#define STM32_GPT_TIM14_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_USE_I2C3                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C3_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_I2C3_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_USE_TIM9                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+#define STM32_ICU_TIM9_IRQ_PRIORITY         7
+
+/*
+ * MAC driver system settings.
+ */
+#define STM32_MAC_TRANSMIT_BUFFERS          2
+#define STM32_MAC_RECEIVE_BUFFERS           4
+#define STM32_MAC_BUFFERS_SIZE              1522
+#define STM32_MAC_PHY_TIMEOUT               100
+#define STM32_MAC_ETH1_CHANGE_PHY_STATE     TRUE
+#define STM32_MAC_ETH1_IRQ_PRIORITY         13
+#define STM32_MAC_IP_CHECKSUM_OFFLOAD       0
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_USE_TIM9                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+#define STM32_PWM_TIM9_IRQ_PRIORITY         7
+
+/*
+ * SDC driver system settings.
+ */
+#define STM32_SDC_SDIO_DMA_PRIORITY         3
+#define STM32_SDC_SDIO_IRQ_PRIORITY         9
+#define STM32_SDC_WRITE_TIMEOUT_MS          250
+#define STM32_SDC_READ_TIMEOUT_MS           25
+#define STM32_SDC_CLOCK_ACTIVATION_DELAY    10
+#define STM32_SDC_SDIO_UNALIGNED_SUPPORT    TRUE
+#define STM32_SDC_SDIO_DMA_STREAM           STM32_DMA_STREAM_ID(2, 3)
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USE_USART6             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+#define STM32_SERIAL_USART6_PRIORITY        12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USE_UART4                FALSE
+#define STM32_UART_USE_UART5                FALSE
+#define STM32_UART_USE_USART6               FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART3_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 1)
+#define STM32_UART_USART3_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_UART4_IRQ_PRIORITY       12
+#define STM32_UART_UART5_IRQ_PRIORITY       12
+#define STM32_UART_USART6_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_UART4_DMA_PRIORITY       0
+#define STM32_UART_UART5_DMA_PRIORITY       0
+#define STM32_UART_USART6_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1                  FALSE
+#define STM32_USB_USE_OTG2                  FALSE
+#define STM32_USB_OTG1_IRQ_PRIORITY         14
+#define STM32_USB_OTG2_IRQ_PRIORITY         14
+#define STM32_USB_OTG1_RX_FIFO_SIZE         512
+#define STM32_USB_OTG2_RX_FIFO_SIZE         1024
+#define STM32_USB_OTG_THREAD_PRIO           LOWPRIO
+#define STM32_USB_OTG_THREAD_STACK_SIZE     128
+#define STM32_USB_OTGFIFO_FILL_BASEPRI      0
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/readme.txt b/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/readme.txt
new file mode 100644
index 0000000..793da2e
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/CMSIS-STM32F407-DISCOVERY/readme.txt
@@ -0,0 +1,25 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 STM32F407.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST STM32F4-Discovery board.
+
+** The Demo **
+
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO. just modify the TRGT line in the makefile in order to use
+different GCC toolchains.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/.cproject b/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/.cproject
new file mode 100644
index 0000000..2b6cc52
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/.cproject
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.114656749">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.114656749." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="HAL-STM32F407-DISCOVERY.null.1703860681" name="HAL-STM32F407-DISCOVERY"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.114656749">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/.project b/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/.project
new file mode 100644
index 0000000..fbfc8f4
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/.project
@@ -0,0 +1,95 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>HAL-STM32F407-DISCOVERY</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value>-j1</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>true</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/Makefile b/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/Makefile
new file mode 100644
index 0000000..6c89a16
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/os-less/ARMCMx/osal.mk
+# RTOS files (optional).
+#include $(CHIBIOS)/os/rt/rt.mk
+#include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+#include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/debug/HAL-STM32F407-DISCOVERY (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/debug/HAL-STM32F407-DISCOVERY (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..d390954
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/debug/HAL-STM32F407-DISCOVERY (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\HAL-STM32F407-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="HAL-STM32F407-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/HAL-STM32F407-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/halconf.h b/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/main.c b/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/main.c
new file mode 100644
index 0000000..b9359ee
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/main.c
@@ -0,0 +1,56 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   */
+  halInit();
+
+  /*
+   * Enabling interrupts, initialization done.
+   */
+  osalSysEnable();
+
+  /*
+   * Activates the serial driver 2 using the driver default configuration.
+   * PA2(TX) and PA3(RX) are routed to USART2.
+   */
+  sdStart(&SD2, NULL);
+  palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7));
+  palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7));
+
+  /*
+   * Normal main() thread activity, in this demo it just performs
+   * a shell respawn upon its termination.
+   */
+  while (true) {
+    chnWriteTimeout(&SD2, (uint8_t *)"Hello World!\r\n", 14, TIME_INFINITE);
+
+    palSetPad(GPIOD, GPIOD_LED3);       /* Orange.  */
+    osalThreadSleepMilliseconds(500);
+    palClearPad(GPIOD, GPIOD_LED3);     /* Orange.  */
+    osalThreadSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/mcuconf.h
new file mode 100644
index 0000000..7f15cc1
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/mcuconf.h
@@ -0,0 +1,342 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F4xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_CLOCK48_REQUIRED              TRUE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLM_VALUE                    8
+#define STM32_PLLN_VALUE                    336
+#define STM32_PLLP_VALUE                    2
+#define STM32_PLLQ_VALUE                    7
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV4
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_RTCPRE_VALUE                  8
+#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5
+#define STM32_I2SSRC                        STM32_I2SSRC_CKIN
+#define STM32_PLLI2SN_VALUE                 192
+#define STM32_PLLI2SR_VALUE                 5
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE                 FALSE
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_USE_CAN2                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+#define STM32_CAN_CAN2_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              FALSE
+#define STM32_DAC_USE_DAC1_CH2              FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH1_DMA_STREAM       STM32_DMA_STREAM_ID(1, 5)
+#define STM32_DAC_DAC1_CH2_DMA_STREAM       STM32_DMA_STREAM_ID(1, 6)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI22_IRQ_PRIORITY       15
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_USE_TIM9                  FALSE
+#define STM32_GPT_USE_TIM11                 FALSE
+#define STM32_GPT_USE_TIM12                 FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+#define STM32_GPT_TIM9_IRQ_PRIORITY         7
+#define STM32_GPT_TIM11_IRQ_PRIORITY        7
+#define STM32_GPT_TIM12_IRQ_PRIORITY        7
+#define STM32_GPT_TIM14_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_USE_I2C3                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C3_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_I2C3_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_USE_SPI3                  FALSE
+#define STM32_I2S_SPI2_IRQ_PRIORITY         10
+#define STM32_I2S_SPI3_IRQ_PRIORITY         10
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI3_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2S_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_USE_TIM9                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+#define STM32_ICU_TIM9_IRQ_PRIORITY         7
+
+/*
+ * MAC driver system settings.
+ */
+#define STM32_MAC_TRANSMIT_BUFFERS          2
+#define STM32_MAC_RECEIVE_BUFFERS           4
+#define STM32_MAC_BUFFERS_SIZE              1522
+#define STM32_MAC_PHY_TIMEOUT               100
+#define STM32_MAC_ETH1_CHANGE_PHY_STATE     TRUE
+#define STM32_MAC_ETH1_IRQ_PRIORITY         13
+#define STM32_MAC_IP_CHECKSUM_OFFLOAD       0
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_USE_TIM9                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+#define STM32_PWM_TIM9_IRQ_PRIORITY         7
+
+/*
+ * SDC driver system settings.
+ */
+#define STM32_SDC_SDIO_DMA_PRIORITY         3
+#define STM32_SDC_SDIO_IRQ_PRIORITY         9
+#define STM32_SDC_WRITE_TIMEOUT_MS          250
+#define STM32_SDC_READ_TIMEOUT_MS           25
+#define STM32_SDC_CLOCK_ACTIVATION_DELAY    10
+#define STM32_SDC_SDIO_UNALIGNED_SUPPORT    TRUE
+#define STM32_SDC_SDIO_DMA_STREAM           STM32_DMA_STREAM_ID(2, 3)
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USE_USART6             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+#define STM32_SERIAL_USART6_PRIORITY        12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USE_UART4                FALSE
+#define STM32_UART_USE_UART5                FALSE
+#define STM32_UART_USE_USART6               FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART3_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 1)
+#define STM32_UART_USART3_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_UART4_IRQ_PRIORITY       12
+#define STM32_UART_UART5_IRQ_PRIORITY       12
+#define STM32_UART_USART6_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_UART4_DMA_PRIORITY       0
+#define STM32_UART_UART5_DMA_PRIORITY       0
+#define STM32_UART_USART6_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1                  FALSE
+#define STM32_USB_USE_OTG2                  FALSE
+#define STM32_USB_OTG1_IRQ_PRIORITY         14
+#define STM32_USB_OTG2_IRQ_PRIORITY         14
+#define STM32_USB_OTG1_RX_FIFO_SIZE         512
+#define STM32_USB_OTG2_RX_FIFO_SIZE         1024
+#define STM32_USB_OTG_THREAD_PRIO           LOWPRIO
+#define STM32_USB_OTG_THREAD_STACK_SIZE     128
+#define STM32_USB_OTGFIFO_FILL_BASEPRI      0
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/osalconf.h b/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/osalconf.h
new file mode 100644
index 0000000..ed7d75d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/osalconf.h
@@ -0,0 +1,67 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   Bare-metal OSAL configuration header.
+ *
+ * @addtogroup OSAL_CONF
+ * @{
+ */
+
+#ifndef _OSALCONF_H_
+#define _OSALCONF_H_
+
+/**
+ * @brief   Frequency in Hertz of the system tick.
+ */
+#if !defined(OSAL_ST_FREQUENCY) || defined(__DOXYGEN__)
+#define OSAL_ST_FREQUENCY                   1000
+#endif
+
+/**
+ * @brief   Enables OSAL assertions.
+ */
+#if !defined(OSAL_DBG_ENABLE_ASSERTS) || defined(__DOXYGEN__)
+#define OSAL_DBG_ENABLE_ASSERTS             FALSE
+#endif
+
+/**
+ * @brief   Enables OSAL functions parameters checks.
+ */
+#if !defined(OSAL_DBG_ENABLE_CHECKS) || defined(__DOXYGEN__)
+#define OSAL_DBG_ENABLE_CHECKS              FALSE
+#endif
+
+/**
+ * @brief   OSAL initialization hook.
+ */
+#if !defined(OSAL_INIT_HOOK) || defined(__DOXYGEN__)
+#define OSAL_INIT_HOOK() {                                                  \
+}
+#endif
+
+/**
+ * @brief   Idle loop hook macro.
+ */
+#if !defined(OSAL_IDLE_HOOK) || defined(__DOXYGEN__)
+#define OSAL_IDLE_HOOK() {                                                  \
+}
+#endif
+
+#endif /* _OSALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/readme.txt b/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/readme.txt
new file mode 100644
index 0000000..379b9a1
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/HAL-STM32F407-DISCOVERY/readme.txt
@@ -0,0 +1,26 @@
+*****************************************************************************
+** ChibiOS/HAL port for ARM-Cortex-M4 STM32F407.                           **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST STM32F4-Discovery board.
+
+** The Demo **
+
+The demo is an example of HAL use without underlying operating system, it uses
+a bare-metal OSAL implementation for ARMCMx.
+
+** Build Procedure **
+
+An arm-none-eabi-gcc compliant toolchain is required. Build by giving the "make"
+command in the project directory.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/.cproject b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/.cproject
new file mode 100644
index 0000000..efe7370
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/.cproject
@@ -0,0 +1,176 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.87736009">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.87736009" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.GNU_ELF" point="org.eclipse.cdt.core.BinaryParser"/>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.87736009" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.87736009." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1294118206" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform binaryParser="org.eclipse.cdt.core.GNU_ELF" id="org.eclipse.cdt.build.core.prefbase.toolchain.1294118206.805393367" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.744360857" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="false" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.686764108" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1629275092" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.760786311" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1369722403" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1713969351" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.883301168" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1732469280" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="Nil.null.181931990" name="Nil"/>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/NIL-STM32F051-DISCOVERY"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
+			<buildOutputProvider>
+				<openAction enabled="true" filePath=""/>
+				<parser enabled="true"/>
+			</buildOutputProvider>
+			<scannerInfoProvider id="specsFile">
+				<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+				<parser enabled="true"/>
+			</scannerInfoProvider>
+		</profile>
+		<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
+			<buildOutputProvider>
+				<openAction enabled="true" filePath=""/>
+				<parser enabled="true"/>
+			</buildOutputProvider>
+			<scannerInfoProvider id="specsFile">
+				<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+				<parser enabled="true"/>
+			</scannerInfoProvider>
+		</profile>
+		<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
+			<buildOutputProvider>
+				<openAction enabled="true" filePath=""/>
+				<parser enabled="true"/>
+			</buildOutputProvider>
+			<scannerInfoProvider id="specsFile">
+				<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
+				<parser enabled="true"/>
+			</scannerInfoProvider>
+		</profile>
+		<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
+			<buildOutputProvider>
+				<openAction enabled="true" filePath=""/>
+				<parser enabled="true"/>
+			</buildOutputProvider>
+			<scannerInfoProvider id="specsFile">
+				<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
+				<parser enabled="true"/>
+			</scannerInfoProvider>
+		</profile>
+		<scannerConfigBuildInfo instanceId="0.87736009">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+			<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile">
+				<buildOutputProvider>
+					<openAction enabled="true" filePath=""/>
+					<parser enabled="true"/>
+				</buildOutputProvider>
+				<scannerInfoProvider id="specsFile">
+					<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+					<parser enabled="true"/>
+				</scannerInfoProvider>
+			</profile>
+			<profile id="org.eclipse.cdt.make.core.GCCStandardMakePerFileProfile">
+				<buildOutputProvider>
+					<openAction enabled="true" filePath=""/>
+					<parser enabled="true"/>
+				</buildOutputProvider>
+				<scannerInfoProvider id="makefileGenerator">
+					<runAction arguments="-f ${project_name}_scd.mk" command="make" useDefault="true"/>
+					<parser enabled="true"/>
+				</scannerInfoProvider>
+			</profile>
+			<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfile">
+				<buildOutputProvider>
+					<openAction enabled="true" filePath=""/>
+					<parser enabled="true"/>
+				</buildOutputProvider>
+				<scannerInfoProvider id="specsFile">
+					<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+					<parser enabled="true"/>
+				</scannerInfoProvider>
+			</profile>
+			<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileCPP">
+				<buildOutputProvider>
+					<openAction enabled="true" filePath=""/>
+					<parser enabled="true"/>
+				</buildOutputProvider>
+				<scannerInfoProvider id="specsFile">
+					<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
+					<parser enabled="true"/>
+				</scannerInfoProvider>
+			</profile>
+			<profile id="org.eclipse.cdt.managedbuilder.core.GCCManagedMakePerProjectProfileC">
+				<buildOutputProvider>
+					<openAction enabled="true" filePath=""/>
+					<parser enabled="true"/>
+				</buildOutputProvider>
+				<scannerInfoProvider id="specsFile">
+					<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
+					<parser enabled="true"/>
+				</scannerInfoProvider>
+			</profile>
+			<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfile">
+				<buildOutputProvider>
+					<openAction enabled="true" filePath=""/>
+					<parser enabled="true"/>
+				</buildOutputProvider>
+				<scannerInfoProvider id="specsFile">
+					<runAction arguments="-E -P -v -dD ${plugin_state_location}/${specs_file}" command="gcc" useDefault="true"/>
+					<parser enabled="true"/>
+				</scannerInfoProvider>
+			</profile>
+			<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileCPP">
+				<buildOutputProvider>
+					<openAction enabled="true" filePath=""/>
+					<parser enabled="true"/>
+				</buildOutputProvider>
+				<scannerInfoProvider id="specsFile">
+					<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.cpp" command="g++" useDefault="true"/>
+					<parser enabled="true"/>
+				</scannerInfoProvider>
+			</profile>
+			<profile id="org.eclipse.cdt.managedbuilder.core.GCCWinManagedMakePerProjectProfileC">
+				<buildOutputProvider>
+					<openAction enabled="true" filePath=""/>
+					<parser enabled="true"/>
+				</buildOutputProvider>
+				<scannerInfoProvider id="specsFile">
+					<runAction arguments="-E -P -v -dD ${plugin_state_location}/specs.c" command="gcc" useDefault="true"/>
+					<parser enabled="true"/>
+				</scannerInfoProvider>
+			</profile>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/.project b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/.project
new file mode 100644
index 0000000..0415656
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/.project
@@ -0,0 +1,90 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>NIL-STM32F051-DISCOVERY</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>mingw32-make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>false</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32F0_DISCOVERY</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/Makefile b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/Makefile
new file mode 100644
index 0000000..02d224c
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/Makefile
@@ -0,0 +1,211 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x100
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F0_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/nil/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/nil/nil.mk
+include $(CHIBIOS)/os/nil/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/nil/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m0
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/debug/NIL-STM32F051-DISCOVERY (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/debug/NIL-STM32F051-DISCOVERY (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..7fcd219
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/debug/NIL-STM32F051-DISCOVERY (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\NIL-STM32F051-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="NIL-STM32F051-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/NIL-STM32F051-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/halconf.h b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/main.c b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/main.c
new file mode 100644
index 0000000..c3c8332
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/main.c
@@ -0,0 +1,105 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+#include "nil.h"
+
+/*
+ * Thread 1.
+ */
+THD_WORKING_AREA(waThread1, 128);
+THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+
+  while (true) {
+    palSetPad(GPIOC, GPIOC_LED4);
+    chThdSleepMilliseconds(500);
+    palClearPad(GPIOC, GPIOC_LED4);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Thread 2.
+ */
+THD_WORKING_AREA(waThread2, 128);
+THD_FUNCTION(Thread2, arg) {
+
+  (void)arg;
+
+  while (true) {
+    palSetPad(GPIOC, GPIOC_LED3);
+    chThdSleepMilliseconds(250);
+    palClearPad(GPIOC, GPIOC_LED3);
+    chThdSleepMilliseconds(250);
+  }
+}
+
+/*
+ * Thread 3.
+ */
+THD_WORKING_AREA(waThread3, 128);
+THD_FUNCTION(Thread3, arg) {
+
+  (void)arg;
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   * PA9 and PA10 are routed to USART1.
+   */
+  sdStart(&SD1, NULL);
+  palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(1));       /* USART1 TX.       */
+  palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(1));      /* USART1 RX.       */
+
+  while (true) {
+    chnWrite(&SD1, (const uint8_t *)"Hello World!\r\n", 14);
+    chThdSleepMilliseconds(2000);
+  }
+}
+
+/*
+ * Threads static table, one entry per thread. The number of entries must
+ * match NIL_CFG_NUM_THREADS.
+ */
+THD_TABLE_BEGIN
+  THD_TABLE_ENTRY(waThread1, "blinker1", Thread1, NULL)
+  THD_TABLE_ENTRY(waThread2, "blinker2", Thread2, NULL)
+  THD_TABLE_ENTRY(waThread3, "hello", Thread3, NULL)
+THD_TABLE_END
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /* This is now the idle thread loop, you may perform here a low priority
+     task but you must never try to sleep or wait in this loop. Note that
+     this tasks runs at the lowest priority level so any instruction added
+     here will be executed after all other tasks have been started.*/
+  while (true) {
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/mcuconf.h
new file mode 100644
index 0000000..4681802
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/mcuconf.h
@@ -0,0 +1,200 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE                        STM32_MCOPRE_DIV1
+#define STM32_PLLNODIV                      STM32_PLLNODIV_DIV2
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_CKMODE               STM32_ADC_CKMODE_ADCCLK
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_20_IRQ_PRIORITY    3
+#define STM32_EXT_EXTI21_22_IRQ_PRIORITY    3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI1                  FALSE
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_SPI1_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI2_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI1_IRQ_PRIORITY         2
+#define STM32_I2S_SPI2_IRQ_PRIORITY         2
+#define STM32_I2S_SPI1_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2S_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             TRUE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/nilconf.h b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/nilconf.h
new file mode 100644
index 0000000..7148bde
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F051-DISCOVERY/nilconf.h
@@ -0,0 +1,179 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    nilconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _NILCONF_H_
+#define _NILCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of user threads in the application.
+ * @note    This number is not inclusive of the idle thread which is
+ *          Implicitly handled.
+ */
+#define NIL_CFG_NUM_THREADS                 3
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name System timer settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define NIL_CFG_ST_RESOLUTION               32
+
+/**
+ * @brief   System tick frequency.
+ * @note    This value together with the @p NIL_CFG_ST_RESOLUTION
+ *          option defines the maximum amount of time allowed for
+ *          timeouts.
+ */
+#define NIL_CFG_ST_FREQUENCY                50000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define NIL_CFG_ST_TIMEDELTA                2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define NIL_CFG_USE_EVENTS                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System assertions.
+ */
+#define NIL_CFG_ENABLE_ASSERTS              FALSE
+
+/**
+ * @brief   Stack check.
+ */
+#define NIL_CFG_ENABLE_STACK_CHECK          FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System initialization hook.
+ */
+#if !defined(NIL_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__)
+#define NIL_CFG_SYSTEM_INIT_HOOK() {                                        \
+}
+#endif
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define NIL_CFG_THREAD_EXT_FIELDS                                           \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ */
+#define NIL_CFG_THREAD_EXT_INIT_HOOK(tr) {                                  \
+  /* Add custom threads initialization code here.*/                         \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define NIL_CFG_IDLE_ENTER_HOOK() {                                         \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define NIL_CFG_IDLE_LEAVE_HOOK() {                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ */
+#if !defined(NIL_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
+#define NIL_CFG_SYSTEM_HALT_HOOK(reason) {                                  \
+}
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in nilcore.h).   */
+/*===========================================================================*/
+
+#endif  /* _NILCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/.cproject b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/.cproject
new file mode 100644
index 0000000..97490b4
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/.cproject
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.1413744523">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1413744523" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.1413744523" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.1413744523." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.269595716" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.269595716.1141107066" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.2129274930" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1772759319" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.2136515191" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1437726415" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1423420271" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1083076961" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1120713120" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.279633077" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="NIL-STM32F100-DISCOVERY.null.1831709739" name="NIL-STM32F100-DISCOVERY"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.1413744523">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/NIL-STM32F100-DISCOVERY"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/.project b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/.project
new file mode 100644
index 0000000..f8fb541
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/.project
@@ -0,0 +1,90 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>NIL-STM32F100-DISCOVERY</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>mingw32-make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>false</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32VL_DISCOVERY</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/Makefile b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/Makefile
new file mode 100644
index 0000000..ab54ebd
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x100
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f1xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32VL_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/nil/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/nil/nil.mk
+include $(CHIBIOS)/os/nil/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/nil/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F100xB.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m3
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/debug/NIL-STM32F100-DISCOVERY (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/debug/NIL-STM32F100-DISCOVERY (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..43b90f0
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/debug/NIL-STM32F100-DISCOVERY (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\NIL-STM32F100-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="NIL-STM32F100-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/NIL-STM32F100-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/halconf.h b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/main.c b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/main.c
new file mode 100644
index 0000000..7d3d72f
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/main.c
@@ -0,0 +1,102 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+#include "nil.h"
+
+/*
+ * Thread 1.
+ */
+THD_WORKING_AREA(waThread1, 128);
+THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+
+  while (true) {
+    palSetPad(GPIOC, GPIOC_LED4);
+    chThdSleepMilliseconds(250);
+    palClearPad(GPIOC, GPIOC_LED4);
+    chThdSleepMilliseconds(250);
+  }
+}
+
+/*
+ * Thread 2.
+ */
+THD_WORKING_AREA(waThread2, 128);
+THD_FUNCTION(Thread2, arg) {
+
+  (void)arg;
+
+  while (true) {
+    palSetPad(GPIOC, GPIOC_LED3);
+    chThdSleepMilliseconds(500);
+    palClearPad(GPIOC, GPIOC_LED3);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Thread 3.
+ */
+THD_WORKING_AREA(waThread3, 128);
+THD_FUNCTION(Thread3, arg) {
+
+  (void)arg;
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   */
+  sdStart(&SD1, NULL);
+
+  while (true) {
+    chnWrite(&SD1, (const uint8_t *)"Hello World!\r\n", 14);
+    chThdSleepMilliseconds(2000);
+  }
+}
+
+/*
+ * Threads static table, one entry per thread. The number of entries must
+ * match NIL_CFG_NUM_THREADS.
+ */
+THD_TABLE_BEGIN
+  THD_TABLE_ENTRY(waThread1, "blinker1", Thread1, NULL)
+  THD_TABLE_ENTRY(waThread2, "blinker2", Thread2, NULL)
+  THD_TABLE_ENTRY(waThread3, "hello", Thread3, NULL)
+THD_TABLE_END
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /* This is now the idle thread loop, you may perform here a low priority
+     task but you must never try to sleep or wait in this loop. Note that
+     this tasks runs at the lowest priority level so any instruction added
+     here will be executed after all other tasks have been started.*/
+  while (true) {
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/mcuconf.h
new file mode 100644
index 0000000..e39795d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/mcuconf.h
@@ -0,0 +1,191 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define STM32F100_MCUCONF
+
+/*
+ * STM32F103 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   FALSE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
+#define STM32_PLLMUL_VALUE                  3
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV1
+#define STM32_PPRE2                         STM32_PPRE2_DIV1
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV2
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  TRUE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_IRQ_PRIORITY         6
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  TRUE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY              15
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             TRUE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  TRUE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/nilconf.h b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/nilconf.h
new file mode 100644
index 0000000..d886d6d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F100-DISCOVERY/nilconf.h
@@ -0,0 +1,179 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    nilconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _NILCONF_H_
+#define _NILCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of user threads in the application.
+ * @note    This number is not inclusive of the idle thread which is
+ *          Implicitly handled.
+ */
+#define NIL_CFG_NUM_THREADS                 3
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name System timer settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define NIL_CFG_ST_RESOLUTION               16
+
+/**
+ * @brief   System tick frequency.
+ * @note    This value together with the @p NIL_CFG_ST_RESOLUTION
+ *          option defines the maximum amount of time allowed for
+ *          timeouts.
+ */
+#define NIL_CFG_ST_FREQUENCY                1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define NIL_CFG_ST_TIMEDELTA                2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define NIL_CFG_USE_EVENTS                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System assertions.
+ */
+#define NIL_CFG_ENABLE_ASSERTS              FALSE
+
+/**
+ * @brief   Stack check.
+ */
+#define NIL_CFG_ENABLE_STACK_CHECK          FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System initialization hook.
+ */
+#if !defined(NIL_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__)
+#define NIL_CFG_SYSTEM_INIT_HOOK() {                                        \
+}
+#endif
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define NIL_CFG_THREAD_EXT_FIELDS                                           \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ */
+#define NIL_CFG_THREAD_EXT_INIT_HOOK(tr) {                                  \
+  /* Add custom threads initialization code here.*/                         \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define NIL_CFG_IDLE_ENTER_HOOK() {                                         \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define NIL_CFG_IDLE_LEAVE_HOOK() {                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ */
+#if !defined(NIL_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
+#define NIL_CFG_SYSTEM_HALT_HOOK(reason) {                                  \
+}
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in nilcore.h).   */
+/*===========================================================================*/
+
+#endif  /* _NILCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/.cproject b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/.cproject
new file mode 100644
index 0000000..3a372e9
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/.cproject
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.1984968159">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1984968159" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.1984968159" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.1984968159." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.688272362" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.688272362.270307390" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1075495684" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1667039593" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1490155624" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1745864609" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1771767067" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.232441590" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1677220503" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.2124347918" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="NIL-STM32F303-DISCOVERY.null.1212300359" name="NIL-STM32F303-DISCOVERY"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.1984968159">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/NIL-STM32F303-DISCOVERY"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/.project b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/.project
new file mode 100644
index 0000000..08a6915
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/.project
@@ -0,0 +1,95 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>NIL-STM32F303-DISCOVERY</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>mingw32-make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>false</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/Makefile b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/Makefile
new file mode 100644
index 0000000..7eba78d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x100
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f3xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F3xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/nil/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/nil/nil.mk
+include $(CHIBIOS)/os/nil/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/nil/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/debug/NIL-STM32F303-DISCOVERY (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/debug/NIL-STM32F303-DISCOVERY (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..335ac55
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/debug/NIL-STM32F303-DISCOVERY (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\NIL-STM32F303-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="NIL-STM32F303-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/NIL-STM32F303-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/halconf.h b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/main.c b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/main.c
new file mode 100644
index 0000000..f4e71c4
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/main.c
@@ -0,0 +1,136 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+#include "nil.h"
+#include "ch_test.h"
+
+/*
+ * Blinker thread #1.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+
+  while (true) {
+    palSetPad(GPIOE, GPIOE_LED3_RED);
+    chThdSleepMilliseconds(125);
+    palClearPad(GPIOE, GPIOE_LED3_RED);
+    chThdSleepMilliseconds(125);
+    palSetPad(GPIOE, GPIOE_LED7_GREEN);
+    chThdSleepMilliseconds(125);
+    palClearPad(GPIOE, GPIOE_LED7_GREEN);
+    chThdSleepMilliseconds(125);
+    palSetPad(GPIOE, GPIOE_LED10_RED);
+    chThdSleepMilliseconds(125);
+    palClearPad(GPIOE, GPIOE_LED10_RED);
+    chThdSleepMilliseconds(125);
+    palSetPad(GPIOE, GPIOE_LED6_GREEN);
+    chThdSleepMilliseconds(125);
+    palClearPad(GPIOE, GPIOE_LED6_GREEN);
+    chThdSleepMilliseconds(125);
+  }
+}
+
+/*
+ * Blinker thread #2.
+ */
+static THD_WORKING_AREA(waThread2, 128);
+static THD_FUNCTION(Thread2, arg) {
+
+  (void)arg;
+
+  while (true) {
+    chThdSleepMilliseconds(125);
+    palSetPad(GPIOE, GPIOE_LED5_ORANGE);
+    chThdSleepMilliseconds(125);
+    palClearPad(GPIOE, GPIOE_LED5_ORANGE);
+    chThdSleepMilliseconds(125);
+    palSetPad(GPIOE, GPIOE_LED9_BLUE);
+    chThdSleepMilliseconds(125);
+    palClearPad(GPIOE, GPIOE_LED9_BLUE);
+    chThdSleepMilliseconds(125);
+    palSetPad(GPIOE, GPIOE_LED8_ORANGE);
+    chThdSleepMilliseconds(125);
+    palClearPad(GPIOE, GPIOE_LED8_ORANGE);
+    chThdSleepMilliseconds(125);
+    palSetPad(GPIOE, GPIOE_LED4_BLUE);
+    chThdSleepMilliseconds(125);
+    palClearPad(GPIOE, GPIOE_LED4_BLUE);
+  }
+}
+
+/*
+ * Tester thread.
+ */
+THD_WORKING_AREA(waThread3, 128);
+THD_FUNCTION(Thread3, arg) {
+
+  (void)arg;
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   * PA9 and PA10 are routed to USART1.
+   */
+  sdStart(&SD1, NULL);
+  palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7));       /* USART1 TX.       */
+  palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7));      /* USART1 RX.       */
+
+  /* Welcome message.*/
+  chnWrite(&SD1, (const uint8_t *)"Hello World!\r\n", 14);
+
+  /* Waiting for button push and activation of the test suite.*/
+  while (true) {
+    if (palReadPad(GPIOA, GPIOA_BUTTON))
+      test_execute((BaseSequentialStream *)&SD1);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Threads static table, one entry per thread. The number of entries must
+ * match NIL_CFG_NUM_THREADS.
+ */
+THD_TABLE_BEGIN
+  THD_TABLE_ENTRY(waThread1, "blinker1", Thread1, NULL)
+  THD_TABLE_ENTRY(waThread2, "blinker2", Thread2, NULL)
+  THD_TABLE_ENTRY(wa_test_support, "test_support", test_support, (void *)&nil.threads[3])
+  THD_TABLE_ENTRY(waThread3, "tester", Thread3, NULL)
+THD_TABLE_END
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /* This is now the idle thread loop, you may perform here a low priority
+     task but you must never try to sleep or wait in this loop. Note that
+     this tasks runs at the lowest priority level so any instruction added
+     here will be executed after all other tasks have been started.*/
+  while (true) {
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/mcuconf.h
new file mode 100644
index 0000000..f56731a
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/mcuconf.h
@@ -0,0 +1,253 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F30x drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F3xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADC12PRES                     STM32_ADC12PRES_DIV1
+#define STM32_ADC34PRES                     STM32_ADC34PRES_DIV1
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_USART2SW                      STM32_USART2SW_PCLK
+#define STM32_USART3SW                      STM32_USART3SW_PCLK
+#define STM32_UART4SW                       STM32_UART4SW_PCLK
+#define STM32_UART5SW                       STM32_UART5SW_PCLK
+#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
+#define STM32_I2C2SW                        STM32_I2C2SW_SYSCLK
+#define STM32_TIM1SW                        STM32_TIM1SW_PCLK2
+#define STM32_TIM8SW                        STM32_TIM8SW_PCLK2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE                 FALSE
+#define STM32_ADC_COMPACT_SAMPLES           FALSE
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_USE_ADC4                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 5)
+#define STM32_ADC_ADC4_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_ADC4_DMA_PRIORITY         2
+#define STM32_ADC_ADC12_IRQ_PRIORITY        5
+#define STM32_ADC_ADC3_IRQ_PRIORITY         5
+#define STM32_ADC_ADC4_IRQ_PRIORITY         5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC12_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC34_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              TRUE
+#define STM32_DAC_USE_DAC1_CH2              TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI30_32_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI33_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         10
+#define STM32_I2C_I2C2_IRQ_PRIORITY         10
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             TRUE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  FALSE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/nilconf.h b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/nilconf.h
new file mode 100644
index 0000000..e0b6c53
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F303-DISCOVERY/nilconf.h
@@ -0,0 +1,179 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    nilconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _NILCONF_H_
+#define _NILCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of user threads in the application.
+ * @note    This number is not inclusive of the idle thread which is
+ *          Implicitly handled.
+ */
+#define NIL_CFG_NUM_THREADS                 4
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name System timer settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define NIL_CFG_ST_RESOLUTION               32
+
+/**
+ * @brief   System tick frequency.
+ * @note    This value together with the @p NIL_CFG_ST_RESOLUTION
+ *          option defines the maximum amount of time allowed for
+ *          timeouts.
+ */
+#define NIL_CFG_ST_FREQUENCY                50000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define NIL_CFG_ST_TIMEDELTA                2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define NIL_CFG_USE_EVENTS                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System assertions.
+ */
+#define NIL_CFG_ENABLE_ASSERTS              FALSE
+
+/**
+ * @brief   Stack check.
+ */
+#define NIL_CFG_ENABLE_STACK_CHECK          FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System initialization hook.
+ */
+#if !defined(NIL_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__)
+#define NIL_CFG_SYSTEM_INIT_HOOK() {                                        \
+}
+#endif
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define NIL_CFG_THREAD_EXT_FIELDS                                           \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ */
+#define NIL_CFG_THREAD_EXT_INIT_HOOK(tr) {                                  \
+  /* Add custom threads initialization code here.*/                         \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define NIL_CFG_IDLE_ENTER_HOOK() {                                         \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define NIL_CFG_IDLE_LEAVE_HOOK() {                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ */
+#if !defined(NIL_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
+#define NIL_CFG_SYSTEM_HALT_HOOK(reason) {                                  \
+}
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in nilcore.h).   */
+/*===========================================================================*/
+
+#endif  /* _NILCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/.cproject b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/.cproject
new file mode 100644
index 0000000..3162f0a
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/.cproject
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.1984968159">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1984968159" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.1984968159" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.1984968159." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.688272362" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.688272362.270307390" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1075495684" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1667039593" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1490155624" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1745864609" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1771767067" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.232441590" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1677220503" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.2124347918" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="NIL-STM32F373-STM32373C_EVAL.null.1212300359" name="NIL-STM32F373-STM32373C_EVAL"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.1984968159">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/NIL-STM32F373-STM32373C_EVAL"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/.project b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/.project
new file mode 100644
index 0000000..8cd970a
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/.project
@@ -0,0 +1,90 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>NIL-STM32F373-STM32373C_EVAL</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>mingw32-make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>false</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32373C_EVAL</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/Makefile b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/Makefile
new file mode 100644
index 0000000..a8db746
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x100
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f3xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk
+include $(CHIBIOS)/os/hal/osal/nil/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/nil/nil.mk
+include $(CHIBIOS)/os/nil/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/nil/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F373xC.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/debug/NIL-STM32F373-STM32373C_EVAL (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/debug/NIL-STM32F373-STM32373C_EVAL (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..dbb5aa6
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/debug/NIL-STM32F373-STM32373C_EVAL (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\NIL-STM32F373-STM32373C_EVAL\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="NIL-STM32F373-STM32373C_EVAL"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/NIL-STM32F373-STM32373C_EVAL"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/halconf.h b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/main.c b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/main.c
new file mode 100644
index 0000000..c2dcf30
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/main.c
@@ -0,0 +1,105 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+#include "nil.h"
+
+/*
+ * Thread 1.
+ */
+THD_WORKING_AREA(waThread1, 128);
+THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+
+  while (true) {
+    palSetPad(GPIOC, GPIOC_LED1);
+    chThdSleepMilliseconds(250);
+    palClearPad(GPIOC, GPIOC_LED1);
+    chThdSleepMilliseconds(250);
+  }
+}
+
+/*
+ * Thread 2.
+ */
+THD_WORKING_AREA(waThread2, 128);
+THD_FUNCTION(Thread2, arg) {
+
+  (void)arg;
+
+  while (true) {
+    palSetPad(GPIOC, GPIOC_LED2);
+    chThdSleepMilliseconds(500);
+    palClearPad(GPIOC, GPIOC_LED2);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Thread 3.
+ */
+THD_WORKING_AREA(waThread3, 128);
+THD_FUNCTION(Thread3, arg) {
+
+  (void)arg;
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   * PA9 and PA10 are routed to USART1.
+   */
+  sdStart(&SD2, NULL);
+  palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7));       /* USART1 TX.       */
+  palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7));      /* USART1 RX.       */
+
+  while (true) {
+    chnWrite(&SD2, (const uint8_t *)"Hello World!\r\n", 14);
+    chThdSleepMilliseconds(2000);
+  }
+}
+
+/*
+ * Threads static table, one entry per thread. The number of entries must
+ * match NIL_CFG_NUM_THREADS.
+ */
+THD_TABLE_BEGIN
+  THD_TABLE_ENTRY(waThread1, "blinker1", Thread1, NULL)
+  THD_TABLE_ENTRY(waThread2, "blinker2", Thread2, NULL)
+  THD_TABLE_ENTRY(waThread3, "hello", Thread3, NULL)
+THD_TABLE_END
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /* This is now the idle thread loop, you may perform here a low priority
+     task but you must never try to sleep or wait in this loop. Note that
+     this tasks runs at the lowest priority level so any instruction added
+     here will be executed after all other tasks have been started.*/
+  while (true) {
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/mcuconf.h
new file mode 100644
index 0000000..bc542c2
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/mcuconf.h
@@ -0,0 +1,245 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F30x drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F37x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_SDPRE                         STM32_SDPRE_DIV12
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_USART2SW                      STM32_USART2SW_PCLK
+#define STM32_USART3SW                      STM32_USART3SW_PCLK
+#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
+#define STM32_I2C2SW                        STM32_I2C2SW_SYSCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_SDADC1                FALSE
+#define STM32_ADC_USE_SDADC2                FALSE
+#define STM32_ADC_USE_SDADC3                FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_SDADC1_DMA_PRIORITY       2
+#define STM32_ADC_SDADC2_DMA_PRIORITY       2
+#define STM32_ADC_SDADC3_DMA_PRIORITY       2
+#define STM32_ADC_ADC1_IRQ_PRIORITY         5
+#define STM32_ADC_SDADC1_IRQ_PRIORITY       5
+#define STM32_ADC_SDADC2_IRQ_PRIORITY       5
+#define STM32_ADC_SDADC3_IRQ_PRIORITY       5
+#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY   5
+#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY   5
+#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY   5
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  TRUE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              TRUE
+#define STM32_DAC_USE_DAC1_CH2              TRUE
+#define STM32_DAC_USE_DAC2_CH1              TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC2_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC2_CH1_DMA_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_23_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI30_32_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI33_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM12                 FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM12_IRQ_PRIORITY        7
+#define STM32_GPT_TIM14_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         10
+#define STM32_I2C_I2C2_IRQ_PRIORITY         10
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  FALSE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/nilconf.h b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/nilconf.h
new file mode 100644
index 0000000..7148bde
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32F373-STM32373C_EVAL/nilconf.h
@@ -0,0 +1,179 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    nilconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _NILCONF_H_
+#define _NILCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of user threads in the application.
+ * @note    This number is not inclusive of the idle thread which is
+ *          Implicitly handled.
+ */
+#define NIL_CFG_NUM_THREADS                 3
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name System timer settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define NIL_CFG_ST_RESOLUTION               32
+
+/**
+ * @brief   System tick frequency.
+ * @note    This value together with the @p NIL_CFG_ST_RESOLUTION
+ *          option defines the maximum amount of time allowed for
+ *          timeouts.
+ */
+#define NIL_CFG_ST_FREQUENCY                50000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define NIL_CFG_ST_TIMEDELTA                2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define NIL_CFG_USE_EVENTS                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System assertions.
+ */
+#define NIL_CFG_ENABLE_ASSERTS              FALSE
+
+/**
+ * @brief   Stack check.
+ */
+#define NIL_CFG_ENABLE_STACK_CHECK          FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System initialization hook.
+ */
+#if !defined(NIL_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__)
+#define NIL_CFG_SYSTEM_INIT_HOOK() {                                        \
+}
+#endif
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define NIL_CFG_THREAD_EXT_FIELDS                                           \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ */
+#define NIL_CFG_THREAD_EXT_INIT_HOOK(tr) {                                  \
+  /* Add custom threads initialization code here.*/                         \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define NIL_CFG_IDLE_ENTER_HOOK() {                                         \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define NIL_CFG_IDLE_LEAVE_HOOK() {                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ */
+#if !defined(NIL_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
+#define NIL_CFG_SYSTEM_HALT_HOOK(reason) {                                  \
+}
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in nilcore.h).   */
+/*===========================================================================*/
+
+#endif  /* _NILCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/.cproject b/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/.cproject
new file mode 100644
index 0000000..53f0ef7
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/.cproject
@@ -0,0 +1,54 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.114656749">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.114656749." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="NIL-STM32L152-DISCOVERY.null.1703860681" name="NIL-STM32L152-DISCOVERY"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.114656749">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/NIL-STM32L152-DISCOVERY"/>
+		</configuration>
+	</storageModule>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/.project b/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/.project
new file mode 100644
index 0000000..f680e92
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/.project
@@ -0,0 +1,90 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>NIL-STM32L152-DISCOVERY</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>mingw32-make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>false</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32L_DISCOVERY</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/Makefile b/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/Makefile
new file mode 100644
index 0000000..f06fb1f
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x100
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32l1xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/nil/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/nil/nil.mk
+include $(CHIBIOS)/os/nil/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+#include $(CHIBIOS)/test/nil/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32L152xB.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m3
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/debug/NIL-STM32L152-DISCOVERY (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/debug/NIL-STM32L152-DISCOVERY (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..d4be8e4
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/debug/NIL-STM32L152-DISCOVERY (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\NIL-STM32L152-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="NIL-STM32L152-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/NIL-STM32L152-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/halconf.h b/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/main.c b/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/main.c
new file mode 100644
index 0000000..c76aebd
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/main.c
@@ -0,0 +1,105 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+#include "nil.h"
+
+/*
+ * Thread 1.
+ */
+THD_WORKING_AREA(waThread1, 128);
+THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+
+  while (true) {
+    palSetPad(GPIOB, GPIOB_LED4);
+    chThdSleepMilliseconds(250);
+    palClearPad(GPIOB, GPIOB_LED4);
+    chThdSleepMilliseconds(250);
+  }
+}
+
+/*
+ * Thread 2.
+ */
+THD_WORKING_AREA(waThread2, 128);
+THD_FUNCTION(Thread2, arg) {
+
+  (void)arg;
+
+  while (true) {
+    palSetPad(GPIOB, GPIOB_LED3);
+    chThdSleepMilliseconds(500);
+    palClearPad(GPIOB, GPIOB_LED3);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Thread 3.
+ */
+THD_WORKING_AREA(waThread3, 128);
+THD_FUNCTION(Thread3, arg) {
+
+  (void)arg;
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   * PA9 and PA10 are routed to USART1.
+   */
+  sdStart(&SD1, NULL);
+  palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7));       /* USART1 TX.       */
+  palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7));      /* USART1 RX.       */
+
+  while (true) {
+    chnWrite(&SD1, (const uint8_t *)"Hello World!\r\n", 14);
+    chThdSleepMilliseconds(2000);
+  }
+}
+
+/*
+ * Threads static table, one entry per thread. The number of entries must
+ * match NIL_CFG_NUM_THREADS.
+ */
+THD_TABLE_BEGIN
+  THD_TABLE_ENTRY(waThread1, "blinker1", Thread1, NULL)
+  THD_TABLE_ENTRY(waThread2, "blinker2", Thread2, NULL)
+  THD_TABLE_ENTRY(waThread3, "hello", Thread3, NULL)
+THD_TABLE_END
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /* This is now the idle thread loop, you may perform here a low priority
+     task but you must never try to sleep or wait in this loop. Note that
+     this tasks runs at the lowest priority level so any instruction added
+     here will be executed after all other tasks have been started.*/
+  while (true) {
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/mcuconf.h
new file mode 100644
index 0000000..462fa03
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/mcuconf.h
@@ -0,0 +1,206 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32L1xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32L1xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   TRUE
+#define STM32_ADC_CLOCK_ENABLED             TRUE
+#define STM32_USB_CLOCK_ENABLED             TRUE
+#define STM32_MSIRANGE                      STM32_MSIRANGE_2M
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI
+#define STM32_PLLMUL_VALUE                  6
+#define STM32_PLLDIV_VALUE                  3
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV1
+#define STM32_PPRE2                         STM32_PPRE2_DIV1
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE                        STM32_MCOPRE_DIV1
+#define STM32_RTCSEL                        STM32_RTCSEL_LSE
+#define STM32_RTCPRE                        STM32_RTCPRE_DIV2
+#define STM32_VOS                           STM32_VOS_1P8
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  TRUE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              FALSE
+#define STM32_DAC_USE_DAC1_CH2              FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_22_IRQ_PRIORITY    6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM9                  FALSE
+#define STM32_GPT_USE_TIM11                 FALSE
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM9_IRQ_PRIORITY         7
+#define STM32_GPT_TIM11_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM9                  FALSE
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM9_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  TRUE
+#define STM32_PWM_USE_TIM9                  FALSE
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM9_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             TRUE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  TRUE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/nilconf.h b/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/nilconf.h
new file mode 100644
index 0000000..d886d6d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/NIL-STM32L152-DISCOVERY/nilconf.h
@@ -0,0 +1,179 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    nilconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _NILCONF_H_
+#define _NILCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of user threads in the application.
+ * @note    This number is not inclusive of the idle thread which is
+ *          Implicitly handled.
+ */
+#define NIL_CFG_NUM_THREADS                 3
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name System timer settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define NIL_CFG_ST_RESOLUTION               16
+
+/**
+ * @brief   System tick frequency.
+ * @note    This value together with the @p NIL_CFG_ST_RESOLUTION
+ *          option defines the maximum amount of time allowed for
+ *          timeouts.
+ */
+#define NIL_CFG_ST_FREQUENCY                1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define NIL_CFG_ST_TIMEDELTA                2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define NIL_CFG_USE_EVENTS                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System assertions.
+ */
+#define NIL_CFG_ENABLE_ASSERTS              FALSE
+
+/**
+ * @brief   Stack check.
+ */
+#define NIL_CFG_ENABLE_STACK_CHECK          FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System initialization hook.
+ */
+#if !defined(NIL_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__)
+#define NIL_CFG_SYSTEM_INIT_HOOK() {                                        \
+}
+#endif
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define NIL_CFG_THREAD_EXT_FIELDS                                           \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ */
+#define NIL_CFG_THREAD_EXT_INIT_HOOK(tr) {                                  \
+  /* Add custom threads initialization code here.*/                         \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define NIL_CFG_IDLE_ENTER_HOOK() {                                         \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define NIL_CFG_IDLE_LEAVE_HOOK() {                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ */
+#if !defined(NIL_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
+#define NIL_CFG_SYSTEM_HALT_HOOK(reason) {                                  \
+}
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in nilcore.h).   */
+/*===========================================================================*/
+
+#endif  /* _NILCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/.cproject
new file mode 100644
index 0000000..adac66c
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/.cproject
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.2077824274">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.2077824274" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.2077824274" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.2077824274." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.203229382" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.203229382.921093738" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1981534797" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1014159428" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1125060063" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.501348595" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.524434484" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1642681620" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.698212794" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.243558710" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F030R8-NUCLEO.null.1777534423" name="RT-STM32F030R8-NUCLEO"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.2077824274">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/.project
new file mode 100644
index 0000000..1b39e37
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F030R8-NUCLEO</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_NUCLEO_F030R8</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/Makefile
new file mode 100644
index 0000000..7b26e8d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/Makefile
@@ -0,0 +1,211 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_NUCLEO_F030R8/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F030x8.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m0
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/chconf.h
new file mode 100644
index 0000000..3efdfc6
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                16
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/debug/RT-STM32F030R8-NUCLEO (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/debug/RT-STM32F030R8-NUCLEO (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..0a8beb8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/debug/RT-STM32F030R8-NUCLEO (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F030R8-NUCLEO\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F030R8-NUCLEO"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F030R8-NUCLEO"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/main.c
new file mode 100644
index 0000000..bd50f19
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/main.c
@@ -0,0 +1,71 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * Red LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palClearPad(GPIOA, GPIOA_LED_GREEN);
+    chThdSleepMilliseconds(500);
+    palSetPad(GPIOA, GPIOA_LED_GREEN);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 2 using the driver default configuration.
+   */
+  sdStart(&SD2, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (!palReadPad(GPIOC, GPIOC_BUTTON))
+      TestThread(&SD2);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/mcuconf.h
new file mode 100644
index 0000000..7cfd272
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/mcuconf.h
@@ -0,0 +1,191 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE                        STM32_MCOPRE_DIV1
+#define STM32_PLLNODIV                      STM32_PLLNODIV_DIV2
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_CKMODE               STM32_ADC_CKMODE_ADCCLK
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_20_IRQ_PRIORITY    3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI1                  FALSE
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_SPI1_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI2_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI1_IRQ_PRIORITY         2
+#define STM32_I2S_SPI2_IRQ_PRIORITY         2
+#define STM32_I2S_SPI1_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2S_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  3
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/readme.txt
new file mode 100644
index 0000000..fc89492
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F030R8-NUCLEO/readme.txt
@@ -0,0 +1,28 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M0 STM32F030.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST_NUCLEO_F030R8 board.
+
+** The Demo **
+
+The demo flashes the board LED using a thread, by pressing the button located
+on the board the test procedure is activated with output on the serial port
+SD2 (USART2, mapped on USB virtual COM port).
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO. just modify the TRGT line in the makefile in order to use
+different GCC toolchains.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/.cproject
new file mode 100644
index 0000000..badd4cb
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/.cproject
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.603687198">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.603687198" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.603687198" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.603687198." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963.1446538340" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1490952991" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1134067298" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1927705259" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1013764026" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1367371861" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1824820452" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1584496456" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1781547795" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F031K6-NUCLEO32.null.1004513353" name="RT-STM32F031K6-NUCLEO32"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.603687198">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32F031K6-NUCLEO32"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/.project
new file mode 100644
index 0000000..6cee258
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F031K6-NUCLEO32</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_NUCLEO32_F031K6</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/Makefile
new file mode 100644
index 0000000..998bc5a
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x200
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_NUCLEO32_F031K6/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F031x6.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m0
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/chconf.h
new file mode 100644
index 0000000..b92ecea
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/debug/RT-STM32F031K6-NUCLEO32 (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/debug/RT-STM32F031K6-NUCLEO32 (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..d0fd6e0
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/debug/RT-STM32F031K6-NUCLEO32 (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F031K6-NUCLEO32\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F031K6-NUCLEO32"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.603687198"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F031K6-NUCLEO32"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/main.c
new file mode 100644
index 0000000..253510b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/main.c
@@ -0,0 +1,72 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * Red LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  palSetLineMode(LINE_LED_GREEN, PAL_MODE_OUTPUT_PUSHPULL);
+  while (true) {
+    palClearLine(LINE_LED_GREEN);
+    chThdSleepMilliseconds(500);
+    palSetLine(LINE_LED_GREEN);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   */
+  sdStart(&SD1, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (!palReadLine(LINE_ARD_D3))
+      TestThread(&SD1);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/mcuconf.h
new file mode 100644
index 0000000..0953fbf
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/mcuconf.h
@@ -0,0 +1,176 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE                        STM32_MCOPRE_DIV1
+#define STM32_PLLNODIV                      STM32_PLLNODIV_DIV2
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_CKMODE               STM32_ADC_CKMODE_ADCCLK
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_20_IRQ_PRIORITY    3
+#define STM32_EXT_EXTI21_22_IRQ_PRIORITY    3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI1                  FALSE
+#define STM32_I2S_SPI1_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI1_IRQ_PRIORITY         2
+#define STM32_I2S_SPI1_DMA_PRIORITY         1
+#define STM32_I2S_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2S_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             TRUE
+#define STM32_SERIAL_USART1_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/readme.txt
new file mode 100644
index 0000000..df94dee
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F031K6-NUCLEO32/readme.txt
@@ -0,0 +1,27 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M0 STM32F031.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST_NUCLEO32_F031K6 board.
+
+** The Demo **
+
+The demo flashes the board LED using a thread, by pressing the button located
+on the board the test procedure is activated with output on the serial port
+SD1 (USART1, mapped on USB virtual COM port).
+
+** Build Procedure **
+
+The demo has been tested by using the ChibiStudio GCC-based toolchain
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/.cproject
new file mode 100644
index 0000000..af7298a
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/.cproject
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.603687198">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.603687198" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.603687198" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.603687198." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963.1446538340" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1490952991" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1134067298" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1927705259" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1013764026" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1367371861" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1824820452" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1584496456" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1781547795" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F042K6-NUCLEO32.null.1004513353" name="RT-STM32F042K6-NUCLEO32"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.603687198">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32F042K6-NUCLEO32"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/.project
new file mode 100644
index 0000000..3071b0c
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F042K6-NUCLEO32</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_NUCLEO32_F042K6</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/Makefile
new file mode 100644
index 0000000..477bd0b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x200
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_NUCLEO32_F042K6/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F042x6.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m0
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/chconf.h
new file mode 100644
index 0000000..b92ecea
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/debug/RT-STM32F042K6-NUCLEO32 (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/debug/RT-STM32F042K6-NUCLEO32 (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..747be65
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/debug/RT-STM32F042K6-NUCLEO32 (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F042K6-NUCLEO32\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F042K6-NUCLEO32"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.603687198"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F042K6-NUCLEO32"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/main.c
new file mode 100644
index 0000000..15b0bcb
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/main.c
@@ -0,0 +1,72 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * Red LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  palSetLineMode(LINE_LED_GREEN, PAL_MODE_OUTPUT_PUSHPULL);
+  while (true) {
+    palClearLine(LINE_LED_GREEN);
+    chThdSleepMilliseconds(500);
+    palSetLine(LINE_LED_GREEN);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 2 using the driver default configuration.
+   */
+  sdStart(&SD2, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (!palReadLine(LINE_ARD_D3))
+      TestThread(&SD2);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/mcuconf.h
new file mode 100644
index 0000000..6f4d0de
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/mcuconf.h
@@ -0,0 +1,183 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE                        STM32_MCOPRE_DIV1
+#define STM32_PLLNODIV                      STM32_PLLNODIV_DIV2
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_CKMODE               STM32_ADC_CKMODE_ADCCLK
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_20_IRQ_PRIORITY    3
+#define STM32_EXT_EXTI21_22_IRQ_PRIORITY    3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI1                  FALSE
+#define STM32_I2S_SPI1_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI1_IRQ_PRIORITY         2
+#define STM32_I2S_SPI1_DMA_PRIORITY         1
+#define STM32_I2S_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2S_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/readme.txt
new file mode 100644
index 0000000..f3d0d37
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F042K6-NUCLEO32/readme.txt
@@ -0,0 +1,27 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M0 STM32F042.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST_NUCLEO32_F042K6 board.
+
+** The Demo **
+
+The demo flashes the board LED using a thread, by pressing the button located
+on the board the test procedure is activated with output on the serial port
+SD2 (USART2, mapped on USB virtual COM port).
+
+** Build Procedure **
+
+The demo has been tested by using the ChibiStudio GCC-based toolchain
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/.cproject
new file mode 100644
index 0000000..314cbc6
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/.cproject
@@ -0,0 +1,54 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.2077824274">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.2077824274" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.2077824274" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.2077824274." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.203229382" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.203229382.921093738" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1981534797" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1014159428" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1125060063" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.501348595" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.524434484" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1642681620" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.698212794" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.243558710" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F051-DISCOVERY.null.1777534423" name="RT-STM32F051-DISCOVERY"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.2077824274">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32F051-DISCOVERY"/>
+		</configuration>
+	</storageModule>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/.project
new file mode 100644
index 0000000..450539b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F051-DISCOVERY</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32F0_DISCOVERY</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/Makefile
new file mode 100644
index 0000000..b19b5b3
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/Makefile
@@ -0,0 +1,211 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F0_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m0
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/chconf.h
new file mode 100644
index 0000000..b92ecea
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/debug/RT-STM32F051-DISCOVERY (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/debug/RT-STM32F051-DISCOVERY (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..361026b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/debug/RT-STM32F051-DISCOVERY (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F051-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F051-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F051-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/main.c
new file mode 100644
index 0000000..f3e18f9
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/main.c
@@ -0,0 +1,93 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * Blue LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker1");
+  while (true) {
+    palClearPad(GPIOC, GPIOC_LED4);
+    chThdSleepMilliseconds(500);
+    palSetPad(GPIOC, GPIOC_LED4);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Green LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread2, 128);
+static THD_FUNCTION(Thread2, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker2");
+  while (true) {
+    palClearPad(GPIOC, GPIOC_LED3);
+    chThdSleepMilliseconds(250);
+    palSetPad(GPIOC, GPIOC_LED3);
+    chThdSleepMilliseconds(250);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   * PA9 and PA10 are routed to USART1.
+   */
+  sdStart(&SD1, NULL);
+  palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(1));       /* USART1 TX.       */
+  palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(1));      /* USART1 RX.       */
+
+  /*
+   * Creates the blinker threads.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+  chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO, Thread2, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state, when the button is
+   * pressed the test procedure is launched with output on the serial
+   * driver 1.
+   */
+  while (true) {
+    if (palReadPad(GPIOA, GPIOA_BUTTON))
+      TestThread(&SD1);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/mcuconf.h
new file mode 100644
index 0000000..4681802
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/mcuconf.h
@@ -0,0 +1,200 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE                        STM32_MCOPRE_DIV1
+#define STM32_PLLNODIV                      STM32_PLLNODIV_DIV2
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_CKMODE               STM32_ADC_CKMODE_ADCCLK
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_20_IRQ_PRIORITY    3
+#define STM32_EXT_EXTI21_22_IRQ_PRIORITY    3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI1                  FALSE
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_SPI1_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI2_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI1_IRQ_PRIORITY         2
+#define STM32_I2S_SPI2_IRQ_PRIORITY         2
+#define STM32_I2S_SPI1_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2S_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             TRUE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/readme.txt
new file mode 100644
index 0000000..4672d78
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F051-DISCOVERY/readme.txt
@@ -0,0 +1,25 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M0 STM32F051.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST STM32F0-Discovery board.
+
+** The Demo **
+
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO. just modify the TRGT line in the makefile in order to use
+different GCC toolchains.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/.cproject
new file mode 100644
index 0000000..b3f0f0d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/.cproject
@@ -0,0 +1,54 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.1778476092">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1778476092" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.1778476092" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.1778476092." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.285665892" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.285665892.893028886" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.823013526" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1768756444" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.49486920" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1013907283" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.697417823" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.2140365311" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.151428701" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1342039645" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F072-DISCOVERY.null.1378892026" name="RT-STM32F072-DISCOVERY"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.1778476092">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32F072-DISCOVERY"/>
+		</configuration>
+	</storageModule>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/.project
new file mode 100644
index 0000000..bfdbb36
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F072-DISCOVERY</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32F072B_DISCOVERY</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/Makefile
new file mode 100644
index 0000000..3d398a8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/Makefile
@@ -0,0 +1,211 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F072B_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F072xB.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m0
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/chconf.h
new file mode 100644
index 0000000..e7552b2
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           TRUE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                TRUE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               TRUE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 TRUE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 TRUE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/debug/RT-STM32F072-DISCOVERY (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/debug/RT-STM32F072-DISCOVERY (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..b312774
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/debug/RT-STM32F072-DISCOVERY (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F072-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F072-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.2008144195"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F072-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/main.c
new file mode 100644
index 0000000..bd2cc1d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/main.c
@@ -0,0 +1,93 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * Blue LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker1");
+  while (true) {
+    palClearPad(GPIOC, GPIOC_LED_BLUE);
+    chThdSleepMilliseconds(500);
+    palSetPad(GPIOC, GPIOC_LED_BLUE);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Green LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread2, 128);
+static THD_FUNCTION(Thread2, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker2");
+  while (true) {
+    palClearPad(GPIOC, GPIOC_LED_GREEN);
+    chThdSleepMilliseconds(250);
+    palSetPad(GPIOC, GPIOC_LED_GREEN);
+    chThdSleepMilliseconds(250);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   * PA9 and PA10 are routed to USART1.
+   */
+  sdStart(&SD1, NULL);
+  palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(1));       /* USART1 TX.       */
+  palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(1));      /* USART1 RX.       */
+
+  /*
+   * Creates the blinker threads.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+  chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO, Thread2, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state, when the button is
+   * pressed the test procedure is launched with output on the serial
+   * driver 1.
+   */
+  while (true) {
+    if (palReadPad(GPIOA, GPIOA_BUTTON))
+      TestThread(&SD1);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/mcuconf.h
new file mode 100644
index 0000000..ea247c7
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/mcuconf.h
@@ -0,0 +1,245 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE                        STM32_MCOPRE_DIV1
+#define STM32_PLLNODIV                      STM32_PLLNODIV_DIV2
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_CKMODE               STM32_ADC_CKMODE_ADCCLK
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         3
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              TRUE
+#define STM32_DAC_USE_DAC1_CH2              TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH1_DMA_STREAM       STM32_DMA_STREAM_ID(1, 3)
+#define STM32_DAC_DAC1_CH2_DMA_STREAM       STM32_DMA_STREAM_ID(1, 4)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_20_IRQ_PRIORITY    3
+#define STM32_EXT_EXTI21_22_IRQ_PRIORITY    3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI1                  FALSE
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_SPI1_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI2_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI1_IRQ_PRIORITY         2
+#define STM32_I2S_SPI2_IRQ_PRIORITY         2
+#define STM32_I2S_SPI1_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2S_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI1                  FALSE
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_SPI1_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI2_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI1_IRQ_PRIORITY         2
+#define STM32_I2S_SPI2_IRQ_PRIORITY         2
+#define STM32_I2S_SPI1_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2S_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             TRUE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  FALSE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/readme.txt
new file mode 100644
index 0000000..99ca075
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072-DISCOVERY/readme.txt
@@ -0,0 +1,25 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M0 STM32F072.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST STM32F072-Discovery board.
+
+** The Demo **
+
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO. just modify the TRGT line in the makefile in order to use
+different GCC toolchains.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/.cproject
new file mode 100644
index 0000000..4358ae2
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/.cproject
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.2077824274">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.2077824274" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.2077824274" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.2077824274." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.203229382" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.203229382.921093738" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1981534797" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1014159428" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1125060063" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.501348595" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.524434484" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1642681620" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.698212794" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.243558710" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F072RB-NUCLEO.null.1777534423" name="RT-STM32F072RB-NUCLEO"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.2077824274">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/.project
new file mode 100644
index 0000000..f7a1a55
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F072RB-NUCLEO</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_NUCLEO_F072RB</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/Makefile
new file mode 100644
index 0000000..5b4ebcf
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/Makefile
@@ -0,0 +1,212 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_NUCLEO_F072RB/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F072xB.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+	   $(CHIBIOS)/os/hal/lib/streams/chprintf.c \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m0
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/chconf.h
new file mode 100644
index 0000000..e7552b2
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           TRUE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                TRUE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               TRUE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 TRUE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 TRUE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/debug/RT-STM32F091RC-NUCLEO (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/debug/RT-STM32F091RC-NUCLEO (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..ef1e5e0
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/debug/RT-STM32F091RC-NUCLEO (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F072RB-NUCLEO\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F072RB-NUCLEO"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F072RB-NUCLEO"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/main.c
new file mode 100644
index 0000000..a72527d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/main.c
@@ -0,0 +1,73 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "chprintf.h"
+#include "test.h"
+
+/*
+ * Red LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palClearPad(GPIOA, GPIOA_LED_GREEN);
+    chThdSleepMilliseconds(500);
+    palSetPad(GPIOA, GPIOA_LED_GREEN);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 2 using the driver default configuration.
+   */
+  sdStart(&SD2, NULL);
+  chprintf((BaseSequentialStream *)&SD2, "SYSCLK=%u\r\n", STM32_SYSCLK);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (!palReadPad(GPIOC, GPIOC_BUTTON))
+      TestThread(&SD2);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/mcuconf.h
new file mode 100644
index 0000000..692650b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/mcuconf.h
@@ -0,0 +1,245 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE                        STM32_MCOPRE_DIV1
+#define STM32_PLLNODIV                      STM32_PLLNODIV_DIV2
+#define STM32_USBSW                         STM32_USBSW_HSI48
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_CKMODE               STM32_ADC_CKMODE_ADCCLK
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         3
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              TRUE
+#define STM32_DAC_USE_DAC1_CH2              TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH1_DMA_STREAM       STM32_DMA_STREAM_ID(1, 3)
+#define STM32_DAC_DAC1_CH2_DMA_STREAM       STM32_DMA_STREAM_ID(1, 4)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_20_IRQ_PRIORITY    3
+#define STM32_EXT_EXTI21_22_IRQ_PRIORITY    3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI1                  FALSE
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_SPI1_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI2_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI1_IRQ_PRIORITY         2
+#define STM32_I2S_SPI2_IRQ_PRIORITY         2
+#define STM32_I2S_SPI1_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2S_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI1                  FALSE
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_SPI1_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI2_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI1_IRQ_PRIORITY         2
+#define STM32_I2S_SPI2_IRQ_PRIORITY         2
+#define STM32_I2S_SPI1_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2S_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  FALSE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      3
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/readme.txt
new file mode 100644
index 0000000..c0861a8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F072RB-NUCLEO/readme.txt
@@ -0,0 +1,28 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M0 STM32F072.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST_NUCLEO_F072RB board.
+
+** The Demo **
+
+The demo flashes the board LED using a thread, by pressing the button located
+on the board the test procedure is activated with output on the serial port
+SD2 (USART2, mapped on USB virtual COM port).
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO. just modify the TRGT line in the makefile in order to use
+different GCC toolchains.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/.cproject
new file mode 100644
index 0000000..b640463
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/.cproject
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.2077824274">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.2077824274" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.2077824274" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.2077824274." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.203229382" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.203229382.921093738" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1981534797" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1014159428" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1125060063" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.501348595" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.524434484" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1642681620" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.698212794" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.243558710" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F091RC-NUCLEO.null.1777534423" name="RT-STM32F091RC-NUCLEO"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.2077824274">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/.project
new file mode 100644
index 0000000..cf2af0c
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F091RC-NUCLEO</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_NUCLEO_F091RC</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/Makefile
new file mode 100644
index 0000000..71e4047
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/Makefile
@@ -0,0 +1,211 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_NUCLEO_F091RC/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F091xC.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m0
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/chconf.h
new file mode 100644
index 0000000..b92ecea
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/debug/RT-STM32F091RC-NUCLEO (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/debug/RT-STM32F091RC-NUCLEO (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..42557a0
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/debug/RT-STM32F091RC-NUCLEO (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F091RC-NUCLEO\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F091RC-NUCLEO"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F091RC-NUCLEO"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/main.c
new file mode 100644
index 0000000..bd50f19
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/main.c
@@ -0,0 +1,71 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * Red LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palClearPad(GPIOA, GPIOA_LED_GREEN);
+    chThdSleepMilliseconds(500);
+    palSetPad(GPIOA, GPIOA_LED_GREEN);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 2 using the driver default configuration.
+   */
+  sdStart(&SD2, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (!palReadPad(GPIOC, GPIOC_BUTTON))
+      TestThread(&SD2);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/mcuconf.h
new file mode 100644
index 0000000..3bb9211
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/mcuconf.h
@@ -0,0 +1,240 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F0xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 3...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_HSI14_ENABLED                 TRUE
+#define STM32_HSI48_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI_DIV2
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE                          STM32_PPRE_DIV1
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE                        STM32_MCOPRE_DIV1
+#define STM32_PLLNODIV                      STM32_PLLNODIV_DIV2
+#define STM32_CECSW                         STM32_CECSW_HSI
+#define STM32_I2C1SW                        STM32_I2C1SW_HSI
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_CKMODE               STM32_ADC_CKMODE_ADCCLK
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_20_IRQ_PRIORITY    3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         2
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+#define STM32_GPT_TIM3_IRQ_PRIORITY         2
+#define STM32_GPT_TIM14_IRQ_PRIORITY        2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI1                  FALSE
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_SPI1_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI2_MODE                 (STM32_I2S_MODE_MASTER |        \
+                                             STM32_I2S_MODE_RX)
+#define STM32_I2S_SPI1_IRQ_PRIORITY         2
+#define STM32_I2S_SPI2_IRQ_PRIORITY         2
+#define STM32_I2S_SPI1_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2S_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         3
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+#define STM32_ICU_TIM3_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         3
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+#define STM32_PWM_TIM3_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USE_USART6             FALSE
+#define STM32_SERIAL_USE_UART7              FALSE
+#define STM32_SERIAL_USE_UART8              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+#define STM32_SERIAL_USART3_PRIORITY        3
+#define STM32_SERIAL_UART4_PRIORITY         3
+#define STM32_SERIAL_UART5_PRIORITY         3
+#define STM32_SERIAL_USART6_PRIORITY        3
+#define STM32_SERIAL_UART7_PRIORITY         3
+#define STM32_SERIAL_UART8_PRIORITY         3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         2
+#define STM32_SPI_SPI2_IRQ_PRIORITY         2
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USE_UART4                FALSE
+#define STM32_UART_USE_UART5                FALSE
+#define STM32_UART_USE_USART6               FALSE
+#define STM32_UART_USE_UART7                FALSE
+#define STM32_UART_USE_UART8                FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART3_IRQ_PRIORITY      3
+#define STM32_UART_UART4_IRQ_PRIORITY       3
+#define STM32_UART_UART5_IRQ_PRIORITY       3
+#define STM32_UART_USART6_IRQ_PRIORITY      3
+#define STM32_UART_UART7_IRQ_PRIORITY       3
+#define STM32_UART_UART8_IRQ_PRIORITY       3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_UART4_DMA_PRIORITY       0
+#define STM32_UART_UART5_DMA_PRIORITY       0
+#define STM32_UART_USART6_DMA_PRIORITY      0
+#define STM32_UART_UART7_DMA_PRIORITY       0
+#define STM32_UART_UART8_DMA_PRIORITY       0
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_USART3_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART3_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_UART4_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART5_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART7_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART7_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART8_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_UART8_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/readme.txt
new file mode 100644
index 0000000..ee5983f
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F091RC-NUCLEO/readme.txt
@@ -0,0 +1,28 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M0 STM32F091.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST_NUCLEO_F091RC board.
+
+** The Demo **
+
+The demo flashes the board LED using a thread, by pressing the button located
+on the board the test procedure is activated with output on the serial port
+SD2 (USART2, mapped on USB virtual COM port).
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO. just modify the TRGT line in the makefile in order to use
+different GCC toolchains.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/.cproject
new file mode 100644
index 0000000..3e2544e
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/.cproject
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.1413744523">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1413744523" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.1413744523" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.1413744523." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.269595716" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.269595716.1141107066" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.2129274930" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1772759319" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.2136515191" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1437726415" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1423420271" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1083076961" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1120713120" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.279633077" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F100-DISCOVERY.null.1831709739" name="RT-STM32F100-DISCOVERY"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.1413744523">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32F100-DISCOVERY"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/.project
new file mode 100644
index 0000000..8f84999
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/.project
@@ -0,0 +1,95 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F100-DISCOVERY</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>mingw32-make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>false</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32VL_DISCOVERY</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/Makefile
new file mode 100644
index 0000000..d302ec8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f1xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32VL_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F100xB.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m3
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/chconf.h
new file mode 100644
index 0000000..8c745aa
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                16
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/debug/RT-STM32F100-DISCOVERY (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/debug/RT-STM32F100-DISCOVERY (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..51ffbbb
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/debug/RT-STM32F100-DISCOVERY (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F100-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F100-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F100-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/main.c
new file mode 100644
index 0000000..f2afcea
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/main.c
@@ -0,0 +1,92 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * Blinker thread #1.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+
+  chRegSetThreadName("blinker");
+  while (true) {
+    palSetPad(GPIOC, GPIOC_LED4);
+    chThdSleepMilliseconds(250);
+    palClearPad(GPIOC, GPIOC_LED4);
+    chThdSleepMilliseconds(250);
+  }
+}
+
+/*
+ * Blinker thread #2.
+ */
+static THD_WORKING_AREA(waThread2, 128);
+static THD_FUNCTION(Thread2, arg) {
+
+  (void)arg;
+
+  chRegSetThreadName("blinker");
+  while (true) {
+    palSetPad(GPIOC, GPIOC_LED3);
+    chThdSleepMilliseconds(500);
+    palClearPad(GPIOC, GPIOC_LED3);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   * PA9(TX) and PA10(RX) are routed to USART1.
+   */
+  sdStart(&SD1, NULL);
+
+  /*
+   * Creates the example threads.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO+1, Thread1, NULL);
+  chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO+1, Thread2, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state, when the button is
+   * pressed the test procedure is launched.
+   */
+  while (true) {
+    if (palReadPad(GPIOA, GPIOA_BUTTON))
+      TestThread(&SD1);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/mcuconf.h
new file mode 100644
index 0000000..e39795d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F100-DISCOVERY/mcuconf.h
@@ -0,0 +1,191 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define STM32F100_MCUCONF
+
+/*
+ * STM32F103 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   FALSE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
+#define STM32_PLLMUL_VALUE                  3
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV1
+#define STM32_PPRE2                         STM32_PPRE2_DIV1
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV2
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  TRUE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_IRQ_PRIORITY         6
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  TRUE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY              15
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             TRUE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  TRUE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/.cproject
new file mode 100644
index 0000000..1bbbc2b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/.cproject
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.1413744523">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1413744523" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.1413744523" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.1413744523." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.269595716" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.269595716.1141107066" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.2129274930" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1772759319" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.2136515191" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1437726415" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1423420271" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1083076961" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1120713120" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.279633077" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F103-MAPLEMINI.null.1831709739" name="RT-STM32F103-MAPLEMINI"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.1413744523">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32F103-MAPLEMINI"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/.project
new file mode 100644
index 0000000..1c44f66
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/.project
@@ -0,0 +1,95 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F103-MAPLEMINI</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>mingw32-make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>false</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/MAPLEMINI_STM32_F103</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/Makefile
new file mode 100644
index 0000000..e189b6d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/Makefile
@@ -0,0 +1,226 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# En/disable usage of maplemini bootloader support
+USE_MAPLEMINI_BOOTLOADER ?= 1
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -DUSE_MAPLEMINI_BOOTLOADER=${USE_MAPLEMINI_BOOTLOADER}
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f1xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/MAPLEMINI_STM32_F103/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+ifeq ($(USE_MAPLEMINI_BOOTLOADER),1)
+  LDSCRIPT = $(STARTUPLD)/STM32F103xE_maplemini_bootloader.ld
+else
+  LDSCRIPT = $(STARTUPLD)/STM32F103xE.ld
+endif
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       $(CHIBIOS)/os/various/shell.c \
+       $(CHIBIOS)/os/hal/lib/streams/memstreams.c \
+       $(CHIBIOS)/os/hal/lib/streams/chprintf.c \
+       usbcfg.c main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m3
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/chconf.h
new file mode 100644
index 0000000..619313a
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/chconf.h
@@ -0,0 +1,504 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                16
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 2000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+// Fixup bootloader offset of MapleMini
+#if USE_MAPLEMINI_BOOTLOADER
+# define CORTEX_VTOR_INIT 0x5000
+#endif
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/halconf.h
new file mode 100644
index 0000000..6ebcb21
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          TRUE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/main.c
new file mode 100644
index 0000000..5ce1591
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/main.c
@@ -0,0 +1,216 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include <stdio.h>
+#include <string.h>
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+#include "shell.h"
+#include "chprintf.h"
+
+#include "usbcfg.h"
+
+/*===========================================================================*/
+/* Command line related.                                                     */
+/*===========================================================================*/
+
+#define SHELL_WA_SIZE   THD_WORKING_AREA_SIZE(2048)
+#define TEST_WA_SIZE    THD_WORKING_AREA_SIZE(256)
+
+static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
+  size_t n, size;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: mem\r\n");
+    return;
+  }
+  n = chHeapStatus(NULL, &size);
+  chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX());
+  chprintf(chp, "heap fragments   : %u\r\n", n);
+  chprintf(chp, "heap free total  : %u bytes\r\n", size);
+}
+
+static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
+  static const char *states[] = {CH_STATE_NAMES};
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: threads\r\n");
+    return;
+  }
+  chprintf(chp, "    addr    stack prio refs     state\r\n");
+  tp = chRegFirstThread();
+  do {
+    chprintf(chp, "%08lx %08lx %4lu %4lu %9s\r\n",
+            (uint32_t)tp, (uint32_t)tp->p_ctx.r13,
+            (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
+            states[tp->p_state]);
+    tp = chRegNextThread(tp);
+  } while (tp != NULL);
+}
+
+static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: test\r\n");
+    return;
+  }
+  tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(),
+                           TestThread, chp);
+  if (tp == NULL) {
+    chprintf(chp, "out of memory\r\n");
+    return;
+  }
+  chThdWait(tp);
+}
+
+/* Can be measured using dd if=/dev/xxxx of=/dev/null bs=512 count=10000.*/
+static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) {
+  static uint8_t buf[] =
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef";
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: write\r\n");
+    return;
+  }
+
+  while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) {
+#if 1
+    /* Writing in channel mode.*/
+    chnWrite(&SDU1, buf, sizeof buf - 1);
+#else
+    /* Writing in buffer mode.*/
+    (void) obqGetEmptyBufferTimeout(&SDU1.obqueue, TIME_INFINITE);
+    memcpy(SDU1.obqueue.ptr, buf, SERIAL_USB_BUFFERS_SIZE);
+    obqPostFullBuffer(&SDU1.obqueue, SERIAL_USB_BUFFERS_SIZE);
+#endif
+  }
+  chprintf(chp, "\r\n\nstopped\r\n");
+}
+
+static const ShellCommand commands[] = {
+  {"mem", cmd_mem},
+  {"threads", cmd_threads},
+  {"test", cmd_test},
+  {"write", cmd_write},
+  {NULL, NULL}
+};
+
+static const ShellConfig shell_cfg1 = {
+  (BaseSequentialStream *)&SDU1,
+  commands
+};
+
+/*===========================================================================*/
+/* Generic code.                                                             */
+/*===========================================================================*/
+
+/*
+ * Blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static __attribute__((noreturn)) THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    systime_t time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500;
+    palClearPad(GPIOB, GPIOB_LED);
+    chThdSleepMilliseconds(time);
+    palSetPad(GPIOB, GPIOB_LED);
+    chThdSleepMilliseconds(time);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int __attribute__((noreturn)) main(void) {
+  thread_t *shelltp = NULL;
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Initializes a serial-over-USB CDC driver.
+   */
+  sduObjectInit(&SDU1);
+  sduStart(&SDU1, &serusbcfg);
+
+  /*
+   * Activates the USB driver and then the USB bus pull-up on D+.
+   * Note, a delay is inserted in order to not have to disconnect the cable
+   * after a reset.
+   */
+  usbDisconnectBus(serusbcfg.usbp);
+  chThdSleepMilliseconds(1500);
+  usbStart(serusbcfg.usbp, &usbcfg);
+  usbConnectBus(serusbcfg.usbp);
+
+  /*
+   * Shell manager initialization.
+   */
+  shellInit();
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE))
+      shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
+    else if (chThdTerminatedX(shelltp)) {
+      chThdRelease(shelltp);    /* Recovers memory of the previous shell.   */
+      shelltp = NULL;           /* Triggers spawning of a new shell.        */
+    }
+    chThdSleepMilliseconds(1000);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/mcuconf.h
new file mode 100644
index 0000000..62db5b8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/mcuconf.h
@@ -0,0 +1,214 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define STM32F103_MCUCONF
+
+/*
+ * STM32F103 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   FALSE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_IRQ_PRIORITY         6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY              15
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/readme.txt
new file mode 100644
index 0000000..197a1b1
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/readme.txt
@@ -0,0 +1,59 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M3 STM32F103 on LeafLabs MapleMini       **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on the MapleMini with the original MapleMini bootloader.
+
+You can also use this firmware without the original bootloader. To do so,
+pass USE_MAPLEMINI_BOOTLOADER=0 to make:
+
+> make USE_MAPLEMINI_BOOTLOADER=0
+
+** The Demo **
+
+This demo flashes the board LED using a thread. Also, a simple command shell
+is activated on virtual serial port via USB-CDC driver.
+
+** Build Procedure **
+
+The demo has been tested by using the free arm gcc embedded toolchain.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Flashing Target Board **
+
+To flash the firmware to the maplemini, an additional Make target has been
+added. It requies dfu-util. While the MapleMini is connected via USB and
+still in bootloader mode, just run
+
+     > make flash_usb
+
+If you compiled without the bootloader support, you will have to flash via the
+original serial flashing method. Please see
+http://static.leaflabs.com/pub/leaflabs/maple-docs/latest/bootloader.html#id7
+for a howto. there you can also get the official bootloader files.
+As a quick reference:
+
+  1) connect TTL UART:
+     TX to maple rx1 ("25")
+     RX to tx1 ("26")
+     GND to gnd
+     3.3V to vcc  or  5V to vin
+  
+  2) hold RESET and BUT buttons, release RESET, then after a sec BUT
+     (this sets the STM32 into serial upload mode)
+  
+  3) use stm32loader.py from the link above to upload the firmware
+     > stm32loader.py -p <uart-device> -evw build/ch.bin
+  
+  4) reset device
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/usbcfg.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/usbcfg.c
new file mode 100644
index 0000000..80f0165
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/usbcfg.c
@@ -0,0 +1,336 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+/* Virtual serial port over USB.*/
+SerialUSBDriver SDU1;
+
+/*
+ * Endpoints to be used for USBD1.
+ */
+#define USBD1_DATA_REQUEST_EP           1
+#define USBD1_DATA_AVAILABLE_EP         1
+#define USBD1_INTERRUPT_REQUEST_EP      2
+
+/*
+ * USB Device Descriptor.
+ */
+static const uint8_t vcom_device_descriptor_data[18] = {
+  USB_DESC_DEVICE       (0x0110,        /* bcdUSB (1.1).                    */
+                         0x02,          /* bDeviceClass (CDC).              */
+                         0x00,          /* bDeviceSubClass.                 */
+                         0x00,          /* bDeviceProtocol.                 */
+                         0x40,          /* bMaxPacketSize.                  */
+                         0x0483,        /* idVendor (ST).                   */
+                         0x5740,        /* idProduct.                       */
+                         0x0200,        /* bcdDevice.                       */
+                         1,             /* iManufacturer.                   */
+                         2,             /* iProduct.                        */
+                         3,             /* iSerialNumber.                   */
+                         1)             /* bNumConfigurations.              */
+};
+
+/*
+ * Device Descriptor wrapper.
+ */
+static const USBDescriptor vcom_device_descriptor = {
+  sizeof vcom_device_descriptor_data,
+  vcom_device_descriptor_data
+};
+
+/* Configuration Descriptor tree for a CDC.*/
+static const uint8_t vcom_configuration_descriptor_data[67] = {
+  /* Configuration Descriptor.*/
+  USB_DESC_CONFIGURATION(67,            /* wTotalLength.                    */
+                         0x02,          /* bNumInterfaces.                  */
+                         0x01,          /* bConfigurationValue.             */
+                         0,             /* iConfiguration.                  */
+                         0xC0,          /* bmAttributes (self powered).     */
+                         50),           /* bMaxPower (100mA).               */
+  /* Interface Descriptor.*/
+  USB_DESC_INTERFACE    (0x00,          /* bInterfaceNumber.                */
+                         0x00,          /* bAlternateSetting.               */
+                         0x01,          /* bNumEndpoints.                   */
+                         0x02,          /* bInterfaceClass (Communications
+                                           Interface Class, CDC section
+                                           4.2).                            */
+                         0x02,          /* bInterfaceSubClass (Abstract
+                                         Control Model, CDC section 4.3).   */
+                         0x01,          /* bInterfaceProtocol (AT commands,
+                                           CDC section 4.4).                */
+                         0),            /* iInterface.                      */
+  /* Header Functional Descriptor (CDC section 5.2.3).*/
+  USB_DESC_BYTE         (5),            /* bLength.                         */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x00),         /* bDescriptorSubtype (Header
+                                           Functional Descriptor.           */
+  USB_DESC_BCD          (0x0110),       /* bcdCDC.                          */
+  /* Call Management Functional Descriptor. */
+  USB_DESC_BYTE         (5),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x01),         /* bDescriptorSubtype (Call Management
+                                           Functional Descriptor).          */
+  USB_DESC_BYTE         (0x00),         /* bmCapabilities (D0+D1).          */
+  USB_DESC_BYTE         (0x01),         /* bDataInterface.                  */
+  /* ACM Functional Descriptor.*/
+  USB_DESC_BYTE         (4),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x02),         /* bDescriptorSubtype (Abstract
+                                           Control Management Descriptor).  */
+  USB_DESC_BYTE         (0x02),         /* bmCapabilities.                  */
+  /* Union Functional Descriptor.*/
+  USB_DESC_BYTE         (5),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x06),         /* bDescriptorSubtype (Union
+                                           Functional Descriptor).          */
+  USB_DESC_BYTE         (0x00),         /* bMasterInterface (Communication
+                                           Class Interface).                */
+  USB_DESC_BYTE         (0x01),         /* bSlaveInterface0 (Data Class
+                                           Interface).                      */
+  /* Endpoint 2 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD1_INTERRUPT_REQUEST_EP|0x80,
+                         0x03,          /* bmAttributes (Interrupt).        */
+                         0x0008,        /* wMaxPacketSize.                  */
+                         0xFF),         /* bInterval.                       */
+  /* Interface Descriptor.*/
+  USB_DESC_INTERFACE    (0x01,          /* bInterfaceNumber.                */
+                         0x00,          /* bAlternateSetting.               */
+                         0x02,          /* bNumEndpoints.                   */
+                         0x0A,          /* bInterfaceClass (Data Class
+                                           Interface, CDC section 4.5).     */
+                         0x00,          /* bInterfaceSubClass (CDC section
+                                           4.6).                            */
+                         0x00,          /* bInterfaceProtocol (CDC section
+                                           4.7).                            */
+                         0x00),         /* iInterface.                      */
+  /* Endpoint 3 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD1_DATA_AVAILABLE_EP,       /* bEndpointAddress.*/
+                         0x02,          /* bmAttributes (Bulk).             */
+                         0x0040,        /* wMaxPacketSize.                  */
+                         0x00),         /* bInterval.                       */
+  /* Endpoint 1 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD1_DATA_REQUEST_EP|0x80,    /* bEndpointAddress.*/
+                         0x02,          /* bmAttributes (Bulk).             */
+                         0x0040,        /* wMaxPacketSize.                  */
+                         0x00)          /* bInterval.                       */
+};
+
+/*
+ * Configuration Descriptor wrapper.
+ */
+static const USBDescriptor vcom_configuration_descriptor = {
+  sizeof vcom_configuration_descriptor_data,
+  vcom_configuration_descriptor_data
+};
+
+/*
+ * U.S. English language identifier.
+ */
+static const uint8_t vcom_string0[] = {
+  USB_DESC_BYTE(4),                     /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  USB_DESC_WORD(0x0409)                 /* wLANGID (U.S. English).          */
+};
+
+/*
+ * Vendor string.
+ */
+static const uint8_t vcom_string1[] = {
+  USB_DESC_BYTE(38),                    /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0,
+  'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0,
+  'c', 0, 's', 0
+};
+
+/*
+ * Device Description string.
+ */
+static const uint8_t vcom_string2[] = {
+  USB_DESC_BYTE(56),                    /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0,
+  'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0,
+  'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0,
+  'o', 0, 'r', 0, 't', 0
+};
+
+/*
+ * Serial Number string.
+ */
+static const uint8_t vcom_string3[] = {
+  USB_DESC_BYTE(8),                     /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  '0' + CH_KERNEL_MAJOR, 0,
+  '0' + CH_KERNEL_MINOR, 0,
+  '0' + CH_KERNEL_PATCH, 0
+};
+
+/*
+ * Strings wrappers array.
+ */
+static const USBDescriptor vcom_strings[] = {
+  {sizeof vcom_string0, vcom_string0},
+  {sizeof vcom_string1, vcom_string1},
+  {sizeof vcom_string2, vcom_string2},
+  {sizeof vcom_string3, vcom_string3}
+};
+
+/*
+ * Handles the GET_DESCRIPTOR callback. All required descriptors must be
+ * handled here.
+ */
+static const USBDescriptor *get_descriptor(USBDriver *usbp,
+                                           uint8_t dtype,
+                                           uint8_t dindex,
+                                           uint16_t lang) {
+
+  (void)usbp;
+  (void)lang;
+  switch (dtype) {
+  case USB_DESCRIPTOR_DEVICE:
+    return &vcom_device_descriptor;
+  case USB_DESCRIPTOR_CONFIGURATION:
+    return &vcom_configuration_descriptor;
+  case USB_DESCRIPTOR_STRING:
+    if (dindex < 4)
+      return &vcom_strings[dindex];
+  }
+  return NULL;
+}
+
+/**
+ * @brief   IN EP1 state.
+ */
+static USBInEndpointState ep1instate;
+
+/**
+ * @brief   OUT EP1 state.
+ */
+static USBOutEndpointState ep1outstate;
+
+/**
+ * @brief   EP1 initialization structure (both IN and OUT).
+ */
+static const USBEndpointConfig ep1config = {
+  USB_EP_MODE_TYPE_BULK,
+  NULL,
+  sduDataTransmitted,
+  sduDataReceived,
+  0x0040,
+  0x0040,
+  &ep1instate,
+  &ep1outstate,
+  2,
+  NULL
+};
+
+/**
+ * @brief   IN EP2 state.
+ */
+static USBInEndpointState ep2instate;
+
+/**
+ * @brief   EP2 initialization structure (IN only).
+ */
+static const USBEndpointConfig ep2config = {
+  USB_EP_MODE_TYPE_INTR,
+  NULL,
+  sduInterruptTransmitted,
+  NULL,
+  0x0010,
+  0x0000,
+  &ep2instate,
+  NULL,
+  1,
+  NULL
+};
+
+/*
+ * Handles the USB driver global events.
+ */
+static void usb_event(USBDriver *usbp, usbevent_t event) {
+  extern SerialUSBDriver SDU1;
+
+  switch (event) {
+  case USB_EVENT_RESET:
+    return;
+  case USB_EVENT_ADDRESS:
+    return;
+  case USB_EVENT_CONFIGURED:
+    chSysLockFromISR();
+
+    /* Enables the endpoints specified into the configuration.
+       Note, this callback is invoked from an ISR so I-Class functions
+       must be used.*/
+    usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config);
+    usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config);
+
+    /* Resetting the state of the CDC subsystem.*/
+    sduConfigureHookI(&SDU1);
+
+    chSysUnlockFromISR();
+    return;
+  case USB_EVENT_UNCONFIGURED:
+    return;
+  case USB_EVENT_SUSPEND:
+    chSysLockFromISR();
+
+    /* Disconnection event on suspend.*/
+    sduDisconnectI(&SDU1);
+
+    chSysUnlockFromISR();
+    return;
+  case USB_EVENT_WAKEUP:
+    return;
+  case USB_EVENT_STALLED:
+    return;
+  }
+  return;
+}
+
+/*
+ * Handles the USB driver global events.
+ */
+static void sof_handler(USBDriver *usbp) {
+
+  (void)usbp;
+
+  osalSysLockFromISR();
+  sduSOFHookI(&SDU1);
+  osalSysUnlockFromISR();
+}
+
+/*
+ * USB driver configuration.
+ */
+const USBConfig usbcfg = {
+  usb_event,
+  get_descriptor,
+  sduRequestsHook,
+  sof_handler
+};
+
+/*
+ * Serial over USB driver configuration.
+ */
+const SerialUSBConfig serusbcfg = {
+  &USBD1,
+  USBD1_DATA_REQUEST_EP,
+  USBD1_DATA_AVAILABLE_EP,
+  USBD1_INTERRUPT_REQUEST_EP
+};
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/usbcfg.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/usbcfg.h
new file mode 100644
index 0000000..2da1c40
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-MAPLEMINI/usbcfg.h
@@ -0,0 +1,26 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _USBCFG_H_
+#define _USBCFG_H_
+
+extern const USBConfig usbcfg;
+extern SerialUSBConfig serusbcfg;
+extern SerialUSBDriver SDU1;
+
+#endif  /* _USBCFG_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/.cproject
new file mode 100644
index 0000000..4ff4491
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/.cproject
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.1413744523">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1413744523" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.1413744523" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.1413744523." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.269595716" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.269595716.1141107066" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.2129274930" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1772759319" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.2136515191" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1437726415" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1423420271" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1083076961" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1120713120" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.279633077" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F103-OLIMEX_STM32_P103.null.1831709739" name="RT-STM32F103-OLIMEX_STM32_P103"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.1413744523">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32F103-OLIMEX_STM32_P103"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/.project
new file mode 100644
index 0000000..47b907a
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/.project
@@ -0,0 +1,95 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F103-OLIMEX_STM32_P103</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>mingw32-make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>false</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/OLIMEX_STM32_P103</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/Makefile
new file mode 100644
index 0000000..5c6b139
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f1xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_P103/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F103xB.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m3
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/chconf.h
new file mode 100644
index 0000000..ad2d326
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                16
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 2000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/debug/RT-STM32F103-OLIMEX_STM32_P103 (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/debug/RT-STM32F103-OLIMEX_STM32_P103 (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..3ddfb61
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/debug/RT-STM32F103-OLIMEX_STM32_P103 (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F103-OLIMEX_STM32_P103\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F103-OLIMEX_STM32_P103"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F103-OLIMEX_STM32_P103"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/main.c
new file mode 100644
index 0000000..4b5d556
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/main.c
@@ -0,0 +1,74 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * Blinker thread.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+
+  chRegSetThreadName("blinker");
+  while (true) {
+    palSetPad(GPIOC, GPIOC_LED);
+    chThdSleepMilliseconds(500);
+    palClearPad(GPIOC, GPIOC_LED);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   * PA9(TX) and PA10(RX) are routed to USART1.
+   */
+  sdStart(&SD2, NULL);
+
+  /*
+   * Creates the example thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO+1, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state, when the button is
+   * pressed the test procedure is launched.
+   */
+  while (true) {
+    if (palReadPad(GPIOA, GPIOA_BUTTON))
+      TestThread(&SD2);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/mcuconf.h
new file mode 100644
index 0000000..631213d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/mcuconf.h
@@ -0,0 +1,214 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define STM32F103_MCUCONF
+
+/*
+ * STM32F103 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   FALSE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_IRQ_PRIORITY         6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY              15
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  FALSE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/readme.txt
new file mode 100644
index 0000000..e4ff861
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-OLIMEX_STM32_P103/readme.txt
@@ -0,0 +1,28 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M3 STM32F103.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an Olimex STM32-P103 board.
+
+** The Demo **
+
+The demo flashes the board LED using a thread, by pressing the button located
+on the board the test procedure is activated with output on the serial port
+SD2 (USART2).
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/.cproject
new file mode 100644
index 0000000..01fe14b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/.cproject
@@ -0,0 +1,62 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.1570569554">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1570569554" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.1570569554" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.1570569554." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.2051275125" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform binaryParser="org.eclipse.cdt.core.ELF" id="org.eclipse.cdt.build.core.prefbase.toolchain.2051275125.1235631892" name=""/>
+							<builder id="org.eclipse.cdt.build.core.settings.default.builder.681215945" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1913618182" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1359024970" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.648690541" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths"/>
+								<option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.1530801237" name="Undefined Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.865562104" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.321395526" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.76286563" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths"/>
+								<option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.1772031118" name="Undefined Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1168908150" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1390938668" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.684710851" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths"/>
+								<option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.1457542840" name="Undefined Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.645908401" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F103-STM3210E_EVAL-FATFS-USB.null.100047313" name="RT-STM32F103-STM3210E_EVAL-FATFS-USB"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.1570569554">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32F103-STM3210E_EVAL-FATFS-USB"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/.project
new file mode 100644
index 0000000..27c76ea
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/.project
@@ -0,0 +1,106 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F103-STM3210E_EVAL-FATFS-USB</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value>-j1</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>true</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+		<nature>org.eclipse.cdt.core.ccnature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM3210E_EVAL</locationURI>
+		</link>
+		<link>
+			<name>fatfs</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/ext/fatfs</locationURI>
+		</link>
+		<link>
+			<name>lwip</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/ext/lwip</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/Makefile
new file mode 100644
index 0000000..9c907f8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/Makefile
@@ -0,0 +1,224 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f1xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM3210E_EVAL/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+include $(CHIBIOS)/os/various/lwip_bindings/lwip.mk
+include $(CHIBIOS)/os/various/fatfs_bindings/fatfs.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F103xG.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       $(FATFSSRC) \
+       $(CHIBIOS)/os/various/evtimer.c \
+       $(CHIBIOS)/os/hal/lib/streams/memstreams.c \
+       $(CHIBIOS)/os/hal/lib/streams/chprintf.c \
+       $(CHIBIOS)/os/various/shell.c \
+       usbcfg.c main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(FATFSINC) \
+         $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m3
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/chconf.h
new file mode 100644
index 0000000..9c58ebe
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                16
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 2000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   TRUE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           TRUE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                TRUE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               TRUE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 TRUE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 TRUE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/debug/RT-STM32F103-STM3210E_EVAL-FATFS-USB (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/debug/RT-STM32F103-STM3210E_EVAL-FATFS-USB (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..049487f
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/debug/RT-STM32F103-STM3210E_EVAL-FATFS-USB (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F103-STM3210E_EVAL-FATFS-USB\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F103-STM3210E_EVAL-FATFS-USB"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F103-STM3210E_EVAL-FATFS-USB"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/ffconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/ffconf.h
new file mode 100644
index 0000000..2af5efe
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/ffconf.h
@@ -0,0 +1,230 @@
+/* CHIBIOS FIX */
+#include "ch.h"
+
+/*---------------------------------------------------------------------------/
+/  FatFs - FAT file system module configuration file  R0.10b (C)ChaN, 2014
+/---------------------------------------------------------------------------*/
+
+#ifndef _FFCONF
+#define _FFCONF 8051    /* Revision ID */
+
+
+/*---------------------------------------------------------------------------/
+/ Functions and Buffer Configurations
+/---------------------------------------------------------------------------*/
+
+#define _FS_TINY        0   /* 0:Normal or 1:Tiny */
+/* When _FS_TINY is set to 1, it reduces memory consumption _MAX_SS bytes each
+/  file object. For file data transfer, FatFs uses the common sector buffer in
+/  the file system object (FATFS) instead of private sector buffer eliminated
+/  from the file object (FIL). */
+
+
+#define _FS_READONLY    0   /* 0:Read/Write or 1:Read only */
+/* Setting _FS_READONLY to 1 defines read only configuration. This removes
+/  writing functions, f_write(), f_sync(), f_unlink(), f_mkdir(), f_chmod(),
+/  f_rename(), f_truncate() and useless f_getfree(). */
+
+
+#define _FS_MINIMIZE    0   /* 0 to 3 */
+/* The _FS_MINIMIZE option defines minimization level to remove API functions.
+/
+/   0: All basic functions are enabled.
+/   1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_chmod(), f_utime(),
+/      f_truncate() and f_rename() function are removed.
+/   2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1.
+/   3: f_lseek() function is removed in addition to 2. */
+
+
+#define _USE_STRFUNC    0   /* 0:Disable or 1-2:Enable */
+/* To enable string functions, set _USE_STRFUNC to 1 or 2. */
+
+
+#define _USE_MKFS       0   /* 0:Disable or 1:Enable */
+/* To enable f_mkfs() function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */
+
+
+#define _USE_FASTSEEK   0   /* 0:Disable or 1:Enable */
+/* To enable fast seek feature, set _USE_FASTSEEK to 1. */
+
+
+#define _USE_LABEL      0   /* 0:Disable or 1:Enable */
+/* To enable volume label functions, set _USE_LAVEL to 1 */
+
+
+#define _USE_FORWARD    0   /* 0:Disable or 1:Enable */
+/* To enable f_forward() function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */
+
+
+/*---------------------------------------------------------------------------/
+/ Locale and Namespace Configurations
+/---------------------------------------------------------------------------*/
+
+#define _CODE_PAGE  1252
+/* The _CODE_PAGE specifies the OEM code page to be used on the target system.
+/  Incorrect setting of the code page can cause a file open failure.
+/
+/   932  - Japanese Shift_JIS (DBCS, OEM, Windows)
+/   936  - Simplified Chinese GBK (DBCS, OEM, Windows)
+/   949  - Korean (DBCS, OEM, Windows)
+/   950  - Traditional Chinese Big5 (DBCS, OEM, Windows)
+/   1250 - Central Europe (Windows)
+/   1251 - Cyrillic (Windows)
+/   1252 - Latin 1 (Windows)
+/   1253 - Greek (Windows)
+/   1254 - Turkish (Windows)
+/   1255 - Hebrew (Windows)
+/   1256 - Arabic (Windows)
+/   1257 - Baltic (Windows)
+/   1258 - Vietnam (OEM, Windows)
+/   437  - U.S. (OEM)
+/   720  - Arabic (OEM)
+/   737  - Greek (OEM)
+/   775  - Baltic (OEM)
+/   850  - Multilingual Latin 1 (OEM)
+/   858  - Multilingual Latin 1 + Euro (OEM)
+/   852  - Latin 2 (OEM)
+/   855  - Cyrillic (OEM)
+/   866  - Russian (OEM)
+/   857  - Turkish (OEM)
+/   862  - Hebrew (OEM)
+/   874  - Thai (OEM, Windows)
+/   1    - ASCII (Valid for only non-LFN configuration) */
+
+
+#define _USE_LFN    3       /* 0 to 3 */
+#define _MAX_LFN    255     /* Maximum LFN length to handle (12 to 255) */
+/* The _USE_LFN option switches the LFN feature.
+/
+/   0: Disable LFN feature. _MAX_LFN has no effect.
+/   1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe.
+/   2: Enable LFN with dynamic working buffer on the STACK.
+/   3: Enable LFN with dynamic working buffer on the HEAP.
+/
+/  When enable LFN feature, Unicode handling functions ff_convert() and ff_wtoupper()
+/  function must be added to the project.
+/  The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. When use stack for the
+/  working buffer, take care on stack overflow. When use heap memory for the working
+/  buffer, memory management functions, ff_memalloc() and ff_memfree(), must be added
+/  to the project. */
+
+
+#define _LFN_UNICODE    0   /* 0:ANSI/OEM or 1:Unicode */
+/* To switch the character encoding on the FatFs API (TCHAR) to Unicode, enable LFN
+/  feature and set _LFN_UNICODE to 1. This option affects behavior of string I/O
+/  functions. This option must be 0 when LFN feature is not enabled. */
+
+
+#define _STRF_ENCODE    3   /* 0:ANSI/OEM, 1:UTF-16LE, 2:UTF-16BE, 3:UTF-8 */
+/* When Unicode API is enabled by _LFN_UNICODE option, this option selects the character
+/  encoding on the file to be read/written via string I/O functions, f_gets(), f_putc(),
+/  f_puts and f_printf(). This option has no effect when Unicode API is not enabled. */
+
+
+#define _FS_RPATH       0   /* 0 to 2 */
+/* The _FS_RPATH option configures relative path feature.
+/
+/   0: Disable relative path feature and remove related functions.
+/   1: Enable relative path. f_chdrive() and f_chdir() function are available.
+/   2: f_getcwd() function is available in addition to 1.
+/
+/  Note that output of the f_readdir() fnction is affected by this option. */
+
+
+/*---------------------------------------------------------------------------/
+/ Drive/Volume Configurations
+/---------------------------------------------------------------------------*/
+
+#define _VOLUMES    1
+/* Number of volumes (logical drives) to be used. */
+
+
+#define _STR_VOLUME_ID  0   /* 0:Use only 0-9 for drive ID, 1:Use strings for drive ID */
+#define _VOLUME_STRS    "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3"
+/* When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive
+/  number in the path name. _VOLUME_STRS defines the drive ID strings for each logical
+/  drives. Number of items must be equal to _VOLUMES. Valid characters for the drive ID
+/  strings are: 0-9 and A-Z. */
+
+
+#define _MULTI_PARTITION    0   /* 0:Single partition, 1:Enable multiple partition */
+/* By default(0), each logical drive number is bound to the same physical drive number
+/  and only a FAT volume found on the physical drive is mounted. When it is set to 1,
+/  each logical drive number is bound to arbitrary drive/partition listed in VolToPart[].
+*/
+
+
+#define _MIN_SS     512
+#define _MAX_SS     512
+/* These options configure the range of sector size to be supported. (512, 1024, 2048 or
+/  4096) Always set both 512 for most systems, all memory card and harddisk. But a larger
+/  value may be required for on-board flash memory and some type of optical media.
+/  When _MAX_SS is larger than _MIN_SS, FatFs is configured to variable sector size and
+/  GET_SECTOR_SIZE command must be implemented to the disk_ioctl() function. */
+
+
+#define _USE_ERASE  0   /* 0:Disable or 1:Enable */
+/* To enable sector erase feature, set _USE_ERASE to 1. Also CTRL_ERASE_SECTOR command
+/  should be added to the disk_ioctl() function. */
+
+
+#define _FS_NOFSINFO    0   /* 0 to 3 */
+/* If you need to know correct free space on the FAT32 volume, set bit 0 of this option
+/  and f_getfree() function at first time after volume mount will force a full FAT scan.
+/  Bit 1 controls the last allocated cluster number as bit 0.
+/
+/  bit0=0: Use free cluster count in the FSINFO if available.
+/  bit0=1: Do not trust free cluster count in the FSINFO.
+/  bit1=0: Use last allocated cluster number in the FSINFO if available.
+/  bit1=1: Do not trust last allocated cluster number in the FSINFO.
+*/
+
+
+
+/*---------------------------------------------------------------------------/
+/ System Configurations
+/---------------------------------------------------------------------------*/
+
+#define _FS_LOCK    0   /* 0:Disable or >=1:Enable */
+/* To enable file lock control feature, set _FS_LOCK to non-zero value.
+/  The value defines how many files/sub-directories can be opened simultaneously
+/  with file lock control. This feature uses bss _FS_LOCK * 12 bytes. */
+
+
+#define _FS_REENTRANT   0               /* 0:Disable or 1:Enable */
+#define _FS_TIMEOUT     MS2ST(1000)     /* Timeout period in unit of time tick */
+#define _SYNC_t         semaphore_t*    /* O/S dependent sync object type. e.g. HANDLE, OS_EVENT*, ID, SemaphoreHandle_t and etc.. */
+/* The _FS_REENTRANT option switches the re-entrancy (thread safe) of the FatFs module.
+/
+/   0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect.
+/   1: Enable re-entrancy. Also user provided synchronization handlers,
+/      ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()
+/      function must be added to the project.
+*/
+
+
+#define _WORD_ACCESS    0   /* 0 or 1 */
+/* The _WORD_ACCESS option is an only platform dependent option. It defines
+/  which access method is used to the word data on the FAT volume.
+/
+/   0: Byte-by-byte access. Always compatible with all platforms.
+/   1: Word access. Do not choose this unless under both the following conditions.
+/
+/  * Address misaligned memory access is always allowed for ALL instructions.
+/  * Byte order on the memory is little-endian.
+/
+/  If it is the case, _WORD_ACCESS can also be set to 1 to improve performance and
+/  reduce code size. Following table shows an example of some processor types.
+/
+/   ARM7TDMI    0           ColdFire    0           V850E2      0
+/   Cortex-M3   0           Z80         0/1         V850ES      0/1
+/   Cortex-M0   0           RX600(LE)   0/1         TLCS-870    0/1
+/   AVR         0/1         RX600(BE)   0           TLCS-900    0/1
+/   AVR32       0           RL78        0           R32C        0
+/   PIC18       0/1         SH-2        0           M16C        0/1
+/   PIC24       0           H8S         0           MSP430      0
+/   PIC32       0           H8/300H     0           x86         0/1
+*/
+
+
+#endif /* _FFCONF */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/halconf.h
new file mode 100644
index 0000000..9cd4919
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/halconf.h
@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM                  TRUE
+#endif
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          TRUE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/main.c
new file mode 100644
index 0000000..43d7517
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/main.c
@@ -0,0 +1,371 @@
+/*
+    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include <stdio.h>
+#include <string.h>
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+#include "chprintf.h"
+#include "shell.h"
+
+#include "ff.h"
+
+#include "usbcfg.h"
+
+/*===========================================================================*/
+/* Card insertion monitor.                                                   */
+/*===========================================================================*/
+
+#define POLLING_INTERVAL                10
+#define POLLING_DELAY                   10
+
+/**
+ * @brief   Card monitor timer.
+ */
+static virtual_timer_t tmr;
+
+/**
+ * @brief   Debounce counter.
+ */
+static unsigned cnt;
+
+/**
+ * @brief   Card event sources.
+ */
+static event_source_t inserted_event, removed_event;
+
+/**
+ * @brief   Insertion monitor timer callback function.
+ *
+ * @param[in] p         pointer to the @p BaseBlockDevice object
+ *
+ * @notapi
+ */
+static void tmrfunc(void *p) {
+  BaseBlockDevice *bbdp = p;
+
+  chSysLockFromISR();
+  if (cnt > 0) {
+    if (blkIsInserted(bbdp)) {
+      if (--cnt == 0) {
+        chEvtBroadcastI(&inserted_event);
+      }
+    }
+    else
+      cnt = POLLING_INTERVAL;
+  }
+  else {
+    if (!blkIsInserted(bbdp)) {
+      cnt = POLLING_INTERVAL;
+      chEvtBroadcastI(&removed_event);
+    }
+  }
+  chVTSetI(&tmr, MS2ST(POLLING_DELAY), tmrfunc, bbdp);
+  chSysUnlockFromISR();
+}
+
+/**
+ * @brief   Polling monitor start.
+ *
+ * @param[in] p         pointer to an object implementing @p BaseBlockDevice
+ *
+ * @notapi
+ */
+static void tmr_init(void *p) {
+
+  chEvtObjectInit(&inserted_event);
+  chEvtObjectInit(&removed_event);
+  chSysLock();
+  cnt = POLLING_INTERVAL;
+  chVTSetI(&tmr, MS2ST(POLLING_DELAY), tmrfunc, p);
+  chSysUnlock();
+}
+
+/*===========================================================================*/
+/* FatFs related.                                                            */
+/*===========================================================================*/
+
+/**
+ * @brief FS object.
+ */
+static FATFS SDC_FS;
+
+/* FS mounted and ready.*/
+static bool fs_ready = FALSE;
+
+/* Generic large buffer.*/
+static uint8_t fbuff[1024];
+
+static FRESULT scan_files(BaseSequentialStream *chp, char *path) {
+  FRESULT res;
+  FILINFO fno;
+  DIR dir;
+  int i;
+  char *fn;
+
+#if _USE_LFN
+  fno.lfname = 0;
+  fno.lfsize = 0;
+#endif
+  res = f_opendir(&dir, path);
+  if (res == FR_OK) {
+    i = strlen(path);
+    for (;;) {
+      res = f_readdir(&dir, &fno);
+      if (res != FR_OK || fno.fname[0] == 0)
+        break;
+      if (fno.fname[0] == '.')
+        continue;
+      fn = fno.fname;
+      if (fno.fattrib & AM_DIR) {
+        path[i++] = '/';
+        strcpy(&path[i], fn);
+        res = scan_files(chp, path);
+        if (res != FR_OK)
+          break;
+        path[--i] = 0;
+      }
+      else {
+        chprintf(chp, "%s/%s\r\n", path, fn);
+      }
+    }
+  }
+  return res;
+}
+
+/*===========================================================================*/
+/* Command line related.                                                     */
+/*===========================================================================*/
+
+#define SHELL_WA_SIZE   THD_WORKING_AREA_SIZE(2048)
+#define TEST_WA_SIZE    THD_WORKING_AREA_SIZE(256)
+
+static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
+  size_t n, size;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: mem\r\n");
+    return;
+  }
+  n = chHeapStatus(NULL, &size);
+  chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX());
+  chprintf(chp, "heap fragments   : %u\r\n", n);
+  chprintf(chp, "heap free total  : %u bytes\r\n", size);
+}
+
+static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
+  static const char *states[] = {CH_STATE_NAMES};
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: threads\r\n");
+    return;
+  }
+  chprintf(chp, "    addr    stack prio refs     state time\r\n");
+  tp = chRegFirstThread();
+  do {
+    chprintf(chp, "%08lx %08lx %4lu %4lu %9s\r\n",
+            (uint32_t)tp, (uint32_t)tp->p_ctx.r13,
+            (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
+            states[tp->p_state]);
+    tp = chRegNextThread(tp);
+  } while (tp != NULL);
+}
+
+static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: test\r\n");
+    return;
+  }
+  tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(),
+                           TestThread, chp);
+  if (tp == NULL) {
+    chprintf(chp, "out of memory\r\n");
+    return;
+  }
+  chThdWait(tp);
+}
+
+static void cmd_tree(BaseSequentialStream *chp, int argc, char *argv[]) {
+  FRESULT err;
+  uint32_t clusters;
+  FATFS *fsp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: tree\r\n");
+    return;
+  }
+  if (!fs_ready) {
+    chprintf(chp, "File System not mounted\r\n");
+    return;
+  }
+  err = f_getfree("/", &clusters, &fsp);
+  if (err != FR_OK) {
+    chprintf(chp, "FS: f_getfree() failed\r\n");
+    return;
+  }
+  chprintf(chp,
+           "FS: %lu free clusters, %lu sectors per cluster, %lu bytes free\r\n",
+           clusters, (uint32_t)SDC_FS.csize,
+           clusters * (uint32_t)SDC_FS.csize * (uint32_t)MMCSD_BLOCK_SIZE);
+  fbuff[0] = 0;
+  scan_files(chp, (char *)fbuff);
+}
+
+static const ShellCommand commands[] = {
+  {"mem", cmd_mem},
+  {"threads", cmd_threads},
+  {"test", cmd_test},
+  {"tree", cmd_tree},
+  {NULL, NULL}
+};
+
+static const ShellConfig shell_cfg1 = {
+  (BaseSequentialStream *)&SDU1,
+  commands
+};
+
+/*===========================================================================*/
+/* Main and generic code.                                                    */
+/*===========================================================================*/
+
+/*
+ * Card insertion event.
+ */
+static void InsertHandler(eventid_t id) {
+  FRESULT err;
+
+  (void)id;
+  /*
+   * On insertion SDC initialization and FS mount.
+   */
+  if (sdcConnect(&SDCD1))
+    return;
+
+  err = f_mount(&SDC_FS, "/", 1);
+  if (err != FR_OK) {
+    sdcDisconnect(&SDCD1);
+    return;
+  }
+  fs_ready = TRUE;
+}
+
+/*
+ * Card removal event.
+ */
+static void RemoveHandler(eventid_t id) {
+
+  (void)id;
+  sdcDisconnect(&SDCD1);
+  fs_ready = FALSE;
+}
+
+/*
+ * Green LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palTogglePad(GPIOF, GPIOF_LED1);
+    chThdSleepMilliseconds(fs_ready ? 125 : 500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+  static thread_t *shelltp = NULL;
+  static const evhandler_t evhndl[] = {
+    InsertHandler,
+    RemoveHandler
+  };
+  event_listener_t el0, el1;
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Initializes a serial-over-USB CDC driver.
+   */
+  sduObjectInit(&SDU1);
+  sduStart(&SDU1, &serusbcfg);
+
+  /*
+   * Activates the USB driver and then the USB bus pull-up on D+.
+   * Note, a delay is inserted in order to not have to disconnect the cable
+   * after a reset.
+   */
+  usbDisconnectBus(serusbcfg.usbp);
+  chThdSleepMilliseconds(1500);
+  usbStart(serusbcfg.usbp, &usbcfg);
+  usbConnectBus(serusbcfg.usbp);
+
+  /*
+   * Shell manager initialization.
+   */
+  shellInit();
+
+  /*
+   * Activates SDC driver 1 using default configuration.
+   */
+  sdcStart(&SDCD1, NULL);
+
+  /*
+   * Activates the card insertion monitor.
+   */
+  tmr_init(&SDCD1);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and listen for events.
+   */
+  chEvtRegister(&inserted_event, &el0, 0);
+  chEvtRegister(&removed_event, &el1, 1);
+  while (true) {
+    if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE))
+      shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
+    else if (chThdTerminatedX(shelltp)) {
+      chThdRelease(shelltp);    /* Recovers memory of the previous shell.   */
+      shelltp = NULL;           /* Triggers spawning of a new shell.        */
+    }
+    chEvtDispatch(evhndl, chEvtWaitOneTimeout(ALL_EVENTS, MS2ST(500)));
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/mcuconf.h
new file mode 100644
index 0000000..62db5b8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/mcuconf.h
@@ -0,0 +1,214 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define STM32F103_MCUCONF
+
+/*
+ * STM32F103 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   FALSE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_IRQ_PRIORITY         6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY              15
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/readme.txt
new file mode 100644
index 0000000..4561b87
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/readme.txt
@@ -0,0 +1,28 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 STM32F103.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an Olimex STM32-E407 board.
+
+** The Demo **
+
+FatFs integrated using SDIO.
+The USB-FS port is used as USB-CDC and a command shell is ready to accepts
+commands there.
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/usbcfg.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/usbcfg.c
new file mode 100644
index 0000000..80f0165
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/usbcfg.c
@@ -0,0 +1,336 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+/* Virtual serial port over USB.*/
+SerialUSBDriver SDU1;
+
+/*
+ * Endpoints to be used for USBD1.
+ */
+#define USBD1_DATA_REQUEST_EP           1
+#define USBD1_DATA_AVAILABLE_EP         1
+#define USBD1_INTERRUPT_REQUEST_EP      2
+
+/*
+ * USB Device Descriptor.
+ */
+static const uint8_t vcom_device_descriptor_data[18] = {
+  USB_DESC_DEVICE       (0x0110,        /* bcdUSB (1.1).                    */
+                         0x02,          /* bDeviceClass (CDC).              */
+                         0x00,          /* bDeviceSubClass.                 */
+                         0x00,          /* bDeviceProtocol.                 */
+                         0x40,          /* bMaxPacketSize.                  */
+                         0x0483,        /* idVendor (ST).                   */
+                         0x5740,        /* idProduct.                       */
+                         0x0200,        /* bcdDevice.                       */
+                         1,             /* iManufacturer.                   */
+                         2,             /* iProduct.                        */
+                         3,             /* iSerialNumber.                   */
+                         1)             /* bNumConfigurations.              */
+};
+
+/*
+ * Device Descriptor wrapper.
+ */
+static const USBDescriptor vcom_device_descriptor = {
+  sizeof vcom_device_descriptor_data,
+  vcom_device_descriptor_data
+};
+
+/* Configuration Descriptor tree for a CDC.*/
+static const uint8_t vcom_configuration_descriptor_data[67] = {
+  /* Configuration Descriptor.*/
+  USB_DESC_CONFIGURATION(67,            /* wTotalLength.                    */
+                         0x02,          /* bNumInterfaces.                  */
+                         0x01,          /* bConfigurationValue.             */
+                         0,             /* iConfiguration.                  */
+                         0xC0,          /* bmAttributes (self powered).     */
+                         50),           /* bMaxPower (100mA).               */
+  /* Interface Descriptor.*/
+  USB_DESC_INTERFACE    (0x00,          /* bInterfaceNumber.                */
+                         0x00,          /* bAlternateSetting.               */
+                         0x01,          /* bNumEndpoints.                   */
+                         0x02,          /* bInterfaceClass (Communications
+                                           Interface Class, CDC section
+                                           4.2).                            */
+                         0x02,          /* bInterfaceSubClass (Abstract
+                                         Control Model, CDC section 4.3).   */
+                         0x01,          /* bInterfaceProtocol (AT commands,
+                                           CDC section 4.4).                */
+                         0),            /* iInterface.                      */
+  /* Header Functional Descriptor (CDC section 5.2.3).*/
+  USB_DESC_BYTE         (5),            /* bLength.                         */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x00),         /* bDescriptorSubtype (Header
+                                           Functional Descriptor.           */
+  USB_DESC_BCD          (0x0110),       /* bcdCDC.                          */
+  /* Call Management Functional Descriptor. */
+  USB_DESC_BYTE         (5),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x01),         /* bDescriptorSubtype (Call Management
+                                           Functional Descriptor).          */
+  USB_DESC_BYTE         (0x00),         /* bmCapabilities (D0+D1).          */
+  USB_DESC_BYTE         (0x01),         /* bDataInterface.                  */
+  /* ACM Functional Descriptor.*/
+  USB_DESC_BYTE         (4),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x02),         /* bDescriptorSubtype (Abstract
+                                           Control Management Descriptor).  */
+  USB_DESC_BYTE         (0x02),         /* bmCapabilities.                  */
+  /* Union Functional Descriptor.*/
+  USB_DESC_BYTE         (5),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x06),         /* bDescriptorSubtype (Union
+                                           Functional Descriptor).          */
+  USB_DESC_BYTE         (0x00),         /* bMasterInterface (Communication
+                                           Class Interface).                */
+  USB_DESC_BYTE         (0x01),         /* bSlaveInterface0 (Data Class
+                                           Interface).                      */
+  /* Endpoint 2 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD1_INTERRUPT_REQUEST_EP|0x80,
+                         0x03,          /* bmAttributes (Interrupt).        */
+                         0x0008,        /* wMaxPacketSize.                  */
+                         0xFF),         /* bInterval.                       */
+  /* Interface Descriptor.*/
+  USB_DESC_INTERFACE    (0x01,          /* bInterfaceNumber.                */
+                         0x00,          /* bAlternateSetting.               */
+                         0x02,          /* bNumEndpoints.                   */
+                         0x0A,          /* bInterfaceClass (Data Class
+                                           Interface, CDC section 4.5).     */
+                         0x00,          /* bInterfaceSubClass (CDC section
+                                           4.6).                            */
+                         0x00,          /* bInterfaceProtocol (CDC section
+                                           4.7).                            */
+                         0x00),         /* iInterface.                      */
+  /* Endpoint 3 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD1_DATA_AVAILABLE_EP,       /* bEndpointAddress.*/
+                         0x02,          /* bmAttributes (Bulk).             */
+                         0x0040,        /* wMaxPacketSize.                  */
+                         0x00),         /* bInterval.                       */
+  /* Endpoint 1 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD1_DATA_REQUEST_EP|0x80,    /* bEndpointAddress.*/
+                         0x02,          /* bmAttributes (Bulk).             */
+                         0x0040,        /* wMaxPacketSize.                  */
+                         0x00)          /* bInterval.                       */
+};
+
+/*
+ * Configuration Descriptor wrapper.
+ */
+static const USBDescriptor vcom_configuration_descriptor = {
+  sizeof vcom_configuration_descriptor_data,
+  vcom_configuration_descriptor_data
+};
+
+/*
+ * U.S. English language identifier.
+ */
+static const uint8_t vcom_string0[] = {
+  USB_DESC_BYTE(4),                     /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  USB_DESC_WORD(0x0409)                 /* wLANGID (U.S. English).          */
+};
+
+/*
+ * Vendor string.
+ */
+static const uint8_t vcom_string1[] = {
+  USB_DESC_BYTE(38),                    /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0,
+  'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0,
+  'c', 0, 's', 0
+};
+
+/*
+ * Device Description string.
+ */
+static const uint8_t vcom_string2[] = {
+  USB_DESC_BYTE(56),                    /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0,
+  'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0,
+  'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0,
+  'o', 0, 'r', 0, 't', 0
+};
+
+/*
+ * Serial Number string.
+ */
+static const uint8_t vcom_string3[] = {
+  USB_DESC_BYTE(8),                     /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  '0' + CH_KERNEL_MAJOR, 0,
+  '0' + CH_KERNEL_MINOR, 0,
+  '0' + CH_KERNEL_PATCH, 0
+};
+
+/*
+ * Strings wrappers array.
+ */
+static const USBDescriptor vcom_strings[] = {
+  {sizeof vcom_string0, vcom_string0},
+  {sizeof vcom_string1, vcom_string1},
+  {sizeof vcom_string2, vcom_string2},
+  {sizeof vcom_string3, vcom_string3}
+};
+
+/*
+ * Handles the GET_DESCRIPTOR callback. All required descriptors must be
+ * handled here.
+ */
+static const USBDescriptor *get_descriptor(USBDriver *usbp,
+                                           uint8_t dtype,
+                                           uint8_t dindex,
+                                           uint16_t lang) {
+
+  (void)usbp;
+  (void)lang;
+  switch (dtype) {
+  case USB_DESCRIPTOR_DEVICE:
+    return &vcom_device_descriptor;
+  case USB_DESCRIPTOR_CONFIGURATION:
+    return &vcom_configuration_descriptor;
+  case USB_DESCRIPTOR_STRING:
+    if (dindex < 4)
+      return &vcom_strings[dindex];
+  }
+  return NULL;
+}
+
+/**
+ * @brief   IN EP1 state.
+ */
+static USBInEndpointState ep1instate;
+
+/**
+ * @brief   OUT EP1 state.
+ */
+static USBOutEndpointState ep1outstate;
+
+/**
+ * @brief   EP1 initialization structure (both IN and OUT).
+ */
+static const USBEndpointConfig ep1config = {
+  USB_EP_MODE_TYPE_BULK,
+  NULL,
+  sduDataTransmitted,
+  sduDataReceived,
+  0x0040,
+  0x0040,
+  &ep1instate,
+  &ep1outstate,
+  2,
+  NULL
+};
+
+/**
+ * @brief   IN EP2 state.
+ */
+static USBInEndpointState ep2instate;
+
+/**
+ * @brief   EP2 initialization structure (IN only).
+ */
+static const USBEndpointConfig ep2config = {
+  USB_EP_MODE_TYPE_INTR,
+  NULL,
+  sduInterruptTransmitted,
+  NULL,
+  0x0010,
+  0x0000,
+  &ep2instate,
+  NULL,
+  1,
+  NULL
+};
+
+/*
+ * Handles the USB driver global events.
+ */
+static void usb_event(USBDriver *usbp, usbevent_t event) {
+  extern SerialUSBDriver SDU1;
+
+  switch (event) {
+  case USB_EVENT_RESET:
+    return;
+  case USB_EVENT_ADDRESS:
+    return;
+  case USB_EVENT_CONFIGURED:
+    chSysLockFromISR();
+
+    /* Enables the endpoints specified into the configuration.
+       Note, this callback is invoked from an ISR so I-Class functions
+       must be used.*/
+    usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config);
+    usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config);
+
+    /* Resetting the state of the CDC subsystem.*/
+    sduConfigureHookI(&SDU1);
+
+    chSysUnlockFromISR();
+    return;
+  case USB_EVENT_UNCONFIGURED:
+    return;
+  case USB_EVENT_SUSPEND:
+    chSysLockFromISR();
+
+    /* Disconnection event on suspend.*/
+    sduDisconnectI(&SDU1);
+
+    chSysUnlockFromISR();
+    return;
+  case USB_EVENT_WAKEUP:
+    return;
+  case USB_EVENT_STALLED:
+    return;
+  }
+  return;
+}
+
+/*
+ * Handles the USB driver global events.
+ */
+static void sof_handler(USBDriver *usbp) {
+
+  (void)usbp;
+
+  osalSysLockFromISR();
+  sduSOFHookI(&SDU1);
+  osalSysUnlockFromISR();
+}
+
+/*
+ * USB driver configuration.
+ */
+const USBConfig usbcfg = {
+  usb_event,
+  get_descriptor,
+  sduRequestsHook,
+  sof_handler
+};
+
+/*
+ * Serial over USB driver configuration.
+ */
+const SerialUSBConfig serusbcfg = {
+  &USBD1,
+  USBD1_DATA_REQUEST_EP,
+  USBD1_DATA_AVAILABLE_EP,
+  USBD1_INTERRUPT_REQUEST_EP
+};
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/usbcfg.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/usbcfg.h
new file mode 100644
index 0000000..2da1c40
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103-STM3210E_EVAL-FATFS-USB/usbcfg.h
@@ -0,0 +1,26 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _USBCFG_H_
+#define _USBCFG_H_
+
+extern const USBConfig usbcfg;
+extern SerialUSBConfig serusbcfg;
+extern SerialUSBDriver SDU1;
+
+#endif  /* _USBCFG_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/.cproject
new file mode 100644
index 0000000..5969d03
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/.cproject
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.539548154">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.539548154" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.539548154" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.539548154." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1743759718" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1743759718.163416004" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1496776929" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1194238367" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.781013241" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.424462599" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1280737601" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.49735864" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1205432135" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1755774820" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F103RB-NUCLEO.null.494699019" name="RT-STM32F103RB-NUCLEO"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.539548154">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32F103RB-NUCLEO"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/.project
new file mode 100644
index 0000000..95aa80b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F103RB-NUCLEO</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_NUCLEO_F103RB</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/Makefile
new file mode 100644
index 0000000..1a2f876
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f1xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_NUCLEO_F103RB/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F103xB.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m3
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/chconf.h
new file mode 100644
index 0000000..8c745aa
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                16
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/debug/RT-STM32F103RB-NUCLEO (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/debug/RT-STM32F103RB-NUCLEO (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..d157aba
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/debug/RT-STM32F103RB-NUCLEO (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F103RB-NUCLEO\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F103RB-NUCLEO"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F103RB-NUCLEO"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/main.c
new file mode 100644
index 0000000..bd50f19
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/main.c
@@ -0,0 +1,71 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * Red LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palClearPad(GPIOA, GPIOA_LED_GREEN);
+    chThdSleepMilliseconds(500);
+    palSetPad(GPIOA, GPIOA_LED_GREEN);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 2 using the driver default configuration.
+   */
+  sdStart(&SD2, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (!palReadPad(GPIOC, GPIOC_BUTTON))
+      TestThread(&SD2);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/mcuconf.h
new file mode 100644
index 0000000..0b176d2
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/mcuconf.h
@@ -0,0 +1,214 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define STM32F103_MCUCONF
+
+/*
+ * STM32F103 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   FALSE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI
+#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_RTCSEL                        STM32_RTCSEL_NOCLOCK
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_IRQ_PRIORITY         6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY              15
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  FALSE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/readme.txt
new file mode 100644
index 0000000..4a25d67
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103RB-NUCLEO/readme.txt
@@ -0,0 +1,28 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M3 STM32F103.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST_NUCLEO_F103RB board.
+
+** The Demo **
+
+The demo flashes the board LED using a thread, by pressing the button located
+on the board the test procedure is activated with output on the serial port
+SD2 (USART2, mapped on USB virtual COM port).
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/.cproject
new file mode 100644
index 0000000..beada35
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/.cproject
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.1413744523">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1413744523" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.1413744523" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.1413744523." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.269595716" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.269595716.1141107066" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.2129274930" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1772759319" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.2136515191" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1437726415" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1423420271" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1083076961" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1120713120" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.279633077" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F103_INEMO_DISCOVERY.null.1831709739" name="RT-STM32F103_INEMO_DISCOVERY"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.1413744523">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32F103_INEMO_DISCOVERY"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/.project
new file mode 100644
index 0000000..052c359
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F103_INEMO_DISCOVERY</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_INEMO_M1_DISCOVERY</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/Makefile
new file mode 100644
index 0000000..8c72ece
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/Makefile
@@ -0,0 +1,219 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f1xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F1xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_INEMO_M1_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F103xE.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       $(CHIBIOS)/os/various/shell.c \
+       $(CHIBIOS)/os/hal/lib/streams/memstreams.c \
+       $(CHIBIOS)/os/hal/lib/streams/chprintf.c \
+       usbcfg.c main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m3
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/chconf.h
new file mode 100644
index 0000000..ad2d326
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                16
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 2000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/debug/RT-STM32F103_INEMO_DISCOVERY (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/debug/RT-STM32F103_INEMO_DISCOVERY (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..28db541
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/debug/RT-STM32F103_INEMO_DISCOVERY (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F103_INEMO_DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F103_INEMO_DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F103_INEMO_DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/halconf.h
new file mode 100644
index 0000000..6ebcb21
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          TRUE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/main.c
new file mode 100644
index 0000000..2515f18
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/main.c
@@ -0,0 +1,216 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include <stdio.h>
+#include <string.h>
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+#include "shell.h"
+#include "chprintf.h"
+
+#include "usbcfg.h"
+
+/*===========================================================================*/
+/* Command line related.                                                     */
+/*===========================================================================*/
+
+#define SHELL_WA_SIZE   THD_WORKING_AREA_SIZE(2048)
+#define TEST_WA_SIZE    THD_WORKING_AREA_SIZE(256)
+
+static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
+  size_t n, size;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: mem\r\n");
+    return;
+  }
+  n = chHeapStatus(NULL, &size);
+  chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX());
+  chprintf(chp, "heap fragments   : %u\r\n", n);
+  chprintf(chp, "heap free total  : %u bytes\r\n", size);
+}
+
+static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
+  static const char *states[] = {CH_STATE_NAMES};
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: threads\r\n");
+    return;
+  }
+  chprintf(chp, "    addr    stack prio refs     state\r\n");
+  tp = chRegFirstThread();
+  do {
+    chprintf(chp, "%08lx %08lx %4lu %4lu %9s\r\n",
+            (uint32_t)tp, (uint32_t)tp->p_ctx.r13,
+            (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
+            states[tp->p_state]);
+    tp = chRegNextThread(tp);
+  } while (tp != NULL);
+}
+
+static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: test\r\n");
+    return;
+  }
+  tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(),
+                           TestThread, chp);
+  if (tp == NULL) {
+    chprintf(chp, "out of memory\r\n");
+    return;
+  }
+  chThdWait(tp);
+}
+
+/* Can be measured using dd if=/dev/xxxx of=/dev/null bs=512 count=10000.*/
+static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) {
+  static uint8_t buf[] =
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"
+      "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef";
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: write\r\n");
+    return;
+  }
+
+  while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) {
+#if 1
+    /* Writing in channel mode.*/
+    chnWrite(&SDU1, buf, sizeof buf - 1);
+#else
+    /* Writing in buffer mode.*/
+    (void) obqGetEmptyBufferTimeout(&SDU1.obqueue, TIME_INFINITE);
+    memcpy(SDU1.obqueue.ptr, buf, SERIAL_USB_BUFFERS_SIZE);
+    obqPostFullBuffer(&SDU1.obqueue, SERIAL_USB_BUFFERS_SIZE);
+#endif
+  }
+  chprintf(chp, "\r\n\nstopped\r\n");
+}
+
+static const ShellCommand commands[] = {
+  {"mem", cmd_mem},
+  {"threads", cmd_threads},
+  {"test", cmd_test},
+  {"write", cmd_write},
+  {NULL, NULL}
+};
+
+static const ShellConfig shell_cfg1 = {
+  (BaseSequentialStream *)&SDU1,
+  commands
+};
+
+/*===========================================================================*/
+/* Generic code.                                                             */
+/*===========================================================================*/
+
+/*
+ * Red LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    systime_t time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500;
+    palClearPad(GPIOA, GPIOA_LED_BLUE);
+    chThdSleepMilliseconds(time);
+    palSetPad(GPIOA, GPIOA_LED_BLUE);
+    chThdSleepMilliseconds(time);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+  thread_t *shelltp = NULL;
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Initializes a serial-over-USB CDC driver.
+   */
+  sduObjectInit(&SDU1);
+  sduStart(&SDU1, &serusbcfg);
+
+  /*
+   * Activates the USB driver and then the USB bus pull-up on D+.
+   * Note, a delay is inserted in order to not have to disconnect the cable
+   * after a reset.
+   */
+  usbDisconnectBus(serusbcfg.usbp);
+  chThdSleepMilliseconds(1500);
+  usbStart(serusbcfg.usbp, &usbcfg);
+  usbConnectBus(serusbcfg.usbp);
+
+  /*
+   * Shell manager initialization.
+   */
+  shellInit();
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE))
+      shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
+    else if (chThdTerminatedX(shelltp)) {
+      chThdRelease(shelltp);    /* Recovers memory of the previous shell.   */
+      shelltp = NULL;           /* Triggers spawning of a new shell.        */
+    }
+    chThdSleepMilliseconds(1000);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/mcuconf.h
new file mode 100644
index 0000000..62db5b8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/mcuconf.h
@@ -0,0 +1,214 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+#define STM32F103_MCUCONF
+
+/*
+ * STM32F103 drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   FALSE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLXTPRE                      STM32_PLLXTPRE_DIV1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_RTCSEL                        STM32_RTCSEL_HSEDIV
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_IRQ_PRIORITY         6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * RTC driver system settings.
+ */
+#define STM32_RTC_IRQ_PRIORITY              15
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/readme.txt
new file mode 100644
index 0000000..378f1a6
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/readme.txt
@@ -0,0 +1,27 @@
+*****************************************************************************
+** ChibiOS/RT HAL - USB-CDC driver demo for STM32.                         **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an STEVAL-MKI121V1 board.
+
+** The Demo **
+
+The application demonstrates the use of the STM32 USB driver on an INEMO-M1
+STEVAL-MKI121V1 board..
+
+** Build Procedure **
+
+The demo has been tested using the free Codesourcery GCC-based toolchain
+and YAGARTO.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/usbcfg.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/usbcfg.c
new file mode 100644
index 0000000..80f0165
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/usbcfg.c
@@ -0,0 +1,336 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+/* Virtual serial port over USB.*/
+SerialUSBDriver SDU1;
+
+/*
+ * Endpoints to be used for USBD1.
+ */
+#define USBD1_DATA_REQUEST_EP           1
+#define USBD1_DATA_AVAILABLE_EP         1
+#define USBD1_INTERRUPT_REQUEST_EP      2
+
+/*
+ * USB Device Descriptor.
+ */
+static const uint8_t vcom_device_descriptor_data[18] = {
+  USB_DESC_DEVICE       (0x0110,        /* bcdUSB (1.1).                    */
+                         0x02,          /* bDeviceClass (CDC).              */
+                         0x00,          /* bDeviceSubClass.                 */
+                         0x00,          /* bDeviceProtocol.                 */
+                         0x40,          /* bMaxPacketSize.                  */
+                         0x0483,        /* idVendor (ST).                   */
+                         0x5740,        /* idProduct.                       */
+                         0x0200,        /* bcdDevice.                       */
+                         1,             /* iManufacturer.                   */
+                         2,             /* iProduct.                        */
+                         3,             /* iSerialNumber.                   */
+                         1)             /* bNumConfigurations.              */
+};
+
+/*
+ * Device Descriptor wrapper.
+ */
+static const USBDescriptor vcom_device_descriptor = {
+  sizeof vcom_device_descriptor_data,
+  vcom_device_descriptor_data
+};
+
+/* Configuration Descriptor tree for a CDC.*/
+static const uint8_t vcom_configuration_descriptor_data[67] = {
+  /* Configuration Descriptor.*/
+  USB_DESC_CONFIGURATION(67,            /* wTotalLength.                    */
+                         0x02,          /* bNumInterfaces.                  */
+                         0x01,          /* bConfigurationValue.             */
+                         0,             /* iConfiguration.                  */
+                         0xC0,          /* bmAttributes (self powered).     */
+                         50),           /* bMaxPower (100mA).               */
+  /* Interface Descriptor.*/
+  USB_DESC_INTERFACE    (0x00,          /* bInterfaceNumber.                */
+                         0x00,          /* bAlternateSetting.               */
+                         0x01,          /* bNumEndpoints.                   */
+                         0x02,          /* bInterfaceClass (Communications
+                                           Interface Class, CDC section
+                                           4.2).                            */
+                         0x02,          /* bInterfaceSubClass (Abstract
+                                         Control Model, CDC section 4.3).   */
+                         0x01,          /* bInterfaceProtocol (AT commands,
+                                           CDC section 4.4).                */
+                         0),            /* iInterface.                      */
+  /* Header Functional Descriptor (CDC section 5.2.3).*/
+  USB_DESC_BYTE         (5),            /* bLength.                         */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x00),         /* bDescriptorSubtype (Header
+                                           Functional Descriptor.           */
+  USB_DESC_BCD          (0x0110),       /* bcdCDC.                          */
+  /* Call Management Functional Descriptor. */
+  USB_DESC_BYTE         (5),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x01),         /* bDescriptorSubtype (Call Management
+                                           Functional Descriptor).          */
+  USB_DESC_BYTE         (0x00),         /* bmCapabilities (D0+D1).          */
+  USB_DESC_BYTE         (0x01),         /* bDataInterface.                  */
+  /* ACM Functional Descriptor.*/
+  USB_DESC_BYTE         (4),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x02),         /* bDescriptorSubtype (Abstract
+                                           Control Management Descriptor).  */
+  USB_DESC_BYTE         (0x02),         /* bmCapabilities.                  */
+  /* Union Functional Descriptor.*/
+  USB_DESC_BYTE         (5),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x06),         /* bDescriptorSubtype (Union
+                                           Functional Descriptor).          */
+  USB_DESC_BYTE         (0x00),         /* bMasterInterface (Communication
+                                           Class Interface).                */
+  USB_DESC_BYTE         (0x01),         /* bSlaveInterface0 (Data Class
+                                           Interface).                      */
+  /* Endpoint 2 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD1_INTERRUPT_REQUEST_EP|0x80,
+                         0x03,          /* bmAttributes (Interrupt).        */
+                         0x0008,        /* wMaxPacketSize.                  */
+                         0xFF),         /* bInterval.                       */
+  /* Interface Descriptor.*/
+  USB_DESC_INTERFACE    (0x01,          /* bInterfaceNumber.                */
+                         0x00,          /* bAlternateSetting.               */
+                         0x02,          /* bNumEndpoints.                   */
+                         0x0A,          /* bInterfaceClass (Data Class
+                                           Interface, CDC section 4.5).     */
+                         0x00,          /* bInterfaceSubClass (CDC section
+                                           4.6).                            */
+                         0x00,          /* bInterfaceProtocol (CDC section
+                                           4.7).                            */
+                         0x00),         /* iInterface.                      */
+  /* Endpoint 3 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD1_DATA_AVAILABLE_EP,       /* bEndpointAddress.*/
+                         0x02,          /* bmAttributes (Bulk).             */
+                         0x0040,        /* wMaxPacketSize.                  */
+                         0x00),         /* bInterval.                       */
+  /* Endpoint 1 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD1_DATA_REQUEST_EP|0x80,    /* bEndpointAddress.*/
+                         0x02,          /* bmAttributes (Bulk).             */
+                         0x0040,        /* wMaxPacketSize.                  */
+                         0x00)          /* bInterval.                       */
+};
+
+/*
+ * Configuration Descriptor wrapper.
+ */
+static const USBDescriptor vcom_configuration_descriptor = {
+  sizeof vcom_configuration_descriptor_data,
+  vcom_configuration_descriptor_data
+};
+
+/*
+ * U.S. English language identifier.
+ */
+static const uint8_t vcom_string0[] = {
+  USB_DESC_BYTE(4),                     /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  USB_DESC_WORD(0x0409)                 /* wLANGID (U.S. English).          */
+};
+
+/*
+ * Vendor string.
+ */
+static const uint8_t vcom_string1[] = {
+  USB_DESC_BYTE(38),                    /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0,
+  'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0,
+  'c', 0, 's', 0
+};
+
+/*
+ * Device Description string.
+ */
+static const uint8_t vcom_string2[] = {
+  USB_DESC_BYTE(56),                    /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0,
+  'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0,
+  'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0,
+  'o', 0, 'r', 0, 't', 0
+};
+
+/*
+ * Serial Number string.
+ */
+static const uint8_t vcom_string3[] = {
+  USB_DESC_BYTE(8),                     /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  '0' + CH_KERNEL_MAJOR, 0,
+  '0' + CH_KERNEL_MINOR, 0,
+  '0' + CH_KERNEL_PATCH, 0
+};
+
+/*
+ * Strings wrappers array.
+ */
+static const USBDescriptor vcom_strings[] = {
+  {sizeof vcom_string0, vcom_string0},
+  {sizeof vcom_string1, vcom_string1},
+  {sizeof vcom_string2, vcom_string2},
+  {sizeof vcom_string3, vcom_string3}
+};
+
+/*
+ * Handles the GET_DESCRIPTOR callback. All required descriptors must be
+ * handled here.
+ */
+static const USBDescriptor *get_descriptor(USBDriver *usbp,
+                                           uint8_t dtype,
+                                           uint8_t dindex,
+                                           uint16_t lang) {
+
+  (void)usbp;
+  (void)lang;
+  switch (dtype) {
+  case USB_DESCRIPTOR_DEVICE:
+    return &vcom_device_descriptor;
+  case USB_DESCRIPTOR_CONFIGURATION:
+    return &vcom_configuration_descriptor;
+  case USB_DESCRIPTOR_STRING:
+    if (dindex < 4)
+      return &vcom_strings[dindex];
+  }
+  return NULL;
+}
+
+/**
+ * @brief   IN EP1 state.
+ */
+static USBInEndpointState ep1instate;
+
+/**
+ * @brief   OUT EP1 state.
+ */
+static USBOutEndpointState ep1outstate;
+
+/**
+ * @brief   EP1 initialization structure (both IN and OUT).
+ */
+static const USBEndpointConfig ep1config = {
+  USB_EP_MODE_TYPE_BULK,
+  NULL,
+  sduDataTransmitted,
+  sduDataReceived,
+  0x0040,
+  0x0040,
+  &ep1instate,
+  &ep1outstate,
+  2,
+  NULL
+};
+
+/**
+ * @brief   IN EP2 state.
+ */
+static USBInEndpointState ep2instate;
+
+/**
+ * @brief   EP2 initialization structure (IN only).
+ */
+static const USBEndpointConfig ep2config = {
+  USB_EP_MODE_TYPE_INTR,
+  NULL,
+  sduInterruptTransmitted,
+  NULL,
+  0x0010,
+  0x0000,
+  &ep2instate,
+  NULL,
+  1,
+  NULL
+};
+
+/*
+ * Handles the USB driver global events.
+ */
+static void usb_event(USBDriver *usbp, usbevent_t event) {
+  extern SerialUSBDriver SDU1;
+
+  switch (event) {
+  case USB_EVENT_RESET:
+    return;
+  case USB_EVENT_ADDRESS:
+    return;
+  case USB_EVENT_CONFIGURED:
+    chSysLockFromISR();
+
+    /* Enables the endpoints specified into the configuration.
+       Note, this callback is invoked from an ISR so I-Class functions
+       must be used.*/
+    usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config);
+    usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config);
+
+    /* Resetting the state of the CDC subsystem.*/
+    sduConfigureHookI(&SDU1);
+
+    chSysUnlockFromISR();
+    return;
+  case USB_EVENT_UNCONFIGURED:
+    return;
+  case USB_EVENT_SUSPEND:
+    chSysLockFromISR();
+
+    /* Disconnection event on suspend.*/
+    sduDisconnectI(&SDU1);
+
+    chSysUnlockFromISR();
+    return;
+  case USB_EVENT_WAKEUP:
+    return;
+  case USB_EVENT_STALLED:
+    return;
+  }
+  return;
+}
+
+/*
+ * Handles the USB driver global events.
+ */
+static void sof_handler(USBDriver *usbp) {
+
+  (void)usbp;
+
+  osalSysLockFromISR();
+  sduSOFHookI(&SDU1);
+  osalSysUnlockFromISR();
+}
+
+/*
+ * USB driver configuration.
+ */
+const USBConfig usbcfg = {
+  usb_event,
+  get_descriptor,
+  sduRequestsHook,
+  sof_handler
+};
+
+/*
+ * Serial over USB driver configuration.
+ */
+const SerialUSBConfig serusbcfg = {
+  &USBD1,
+  USBD1_DATA_REQUEST_EP,
+  USBD1_DATA_AVAILABLE_EP,
+  USBD1_INTERRUPT_REQUEST_EP
+};
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/usbcfg.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/usbcfg.h
new file mode 100644
index 0000000..2da1c40
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F103_INEMO_DISCOVERY/usbcfg.h
@@ -0,0 +1,26 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _USBCFG_H_
+#define _USBCFG_H_
+
+extern const USBConfig usbcfg;
+extern SerialUSBConfig serusbcfg;
+extern SerialUSBDriver SDU1;
+
+#endif  /* _USBCFG_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/.cproject
new file mode 100644
index 0000000..4c2da7b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/.cproject
@@ -0,0 +1,50 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.114656749">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.114656749." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F207-DISCOVERY.null.1703860681" name="RT-STM32F207-DISCOVERY"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.114656749">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/.project
new file mode 100644
index 0000000..6d70a44
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/.project
@@ -0,0 +1,95 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F207-DISCOVERY</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value>-j1</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>true</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32F2_DISCOVERY</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/Makefile
new file mode 100644
index 0000000..b45d9f0
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f2xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F2_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F207xG.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m3
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/chconf.h
new file mode 100644
index 0000000..7d99062
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/debug/RT-STM32F407-DISCOVERY (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/debug/RT-STM32F407-DISCOVERY (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..cd91ca0
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/debug/RT-STM32F407-DISCOVERY (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F207-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F207-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F207-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/debug/RT-STM32F407-DISCOVERY (OpenOCD, Just Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/debug/RT-STM32F407-DISCOVERY (OpenOCD, Just Run).launch
new file mode 100644
index 0000000..5be806e
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/debug/RT-STM32F407-DISCOVERY (OpenOCD, Just Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F207-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="0"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList&gt;&lt;content id=&quot;r3-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;vt_delta-null-chVTDoSetI-(format)&quot; val=&quot;4&quot;/&gt;&lt;/contentList&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F207-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F207-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/main.c
new file mode 100644
index 0000000..e7b5bd3
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/main.c
@@ -0,0 +1,75 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * This is a periodic thread that does absolutely nothing except flashing
+ * a LED.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palSetPad(GPIOD, GPIOD_LED3);       /* Orange.  */
+    chThdSleepMilliseconds(500);
+    palClearPad(GPIOD, GPIOD_LED3);     /* Orange.  */
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 2 using the driver default configuration.
+   * PA2(TX) and PA3(RX) are routed to USART2.
+   */
+  sdStart(&SD2, NULL);
+  palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7));
+  palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7));
+
+  /*
+   * Creates the example thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (palReadPad(GPIOA, GPIOA_BUTTON))
+      TestThread(&SD2);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/mcuconf.h
new file mode 100644
index 0000000..e8d8333
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/mcuconf.h
@@ -0,0 +1,342 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F2xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_CLOCK48_REQUIRED              TRUE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLM_VALUE                    8
+#define STM32_PLLN_VALUE                    240
+#define STM32_PLLP_VALUE                    2
+#define STM32_PLLQ_VALUE                    5
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV4
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_RTCPRE_VALUE                  8
+#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5
+#define STM32_I2SSRC                        STM32_I2SSRC_CKIN
+#define STM32_PLLI2SN_VALUE                 192
+#define STM32_PLLI2SR_VALUE                 5
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE                 FALSE
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_USE_CAN2                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+#define STM32_CAN_CAN2_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              FALSE
+#define STM32_DAC_USE_DAC1_CH2              FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH1_DMA_STREAM       STM32_DMA_STREAM_ID(1, 5)
+#define STM32_DAC_DAC1_CH2_DMA_STREAM       STM32_DMA_STREAM_ID(1, 6)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI22_IRQ_PRIORITY       15
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_USE_TIM9                  FALSE
+#define STM32_GPT_USE_TIM11                 FALSE
+#define STM32_GPT_USE_TIM12                 FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+#define STM32_GPT_TIM9_IRQ_PRIORITY         7
+#define STM32_GPT_TIM11_IRQ_PRIORITY        7
+#define STM32_GPT_TIM12_IRQ_PRIORITY        7
+#define STM32_GPT_TIM14_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_USE_I2C3                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C3_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_I2C3_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_USE_SPI3                  FALSE
+#define STM32_I2S_SPI2_IRQ_PRIORITY         10
+#define STM32_I2S_SPI3_IRQ_PRIORITY         10
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI3_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2S_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_USE_TIM9                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+#define STM32_ICU_TIM9_IRQ_PRIORITY         7
+
+/*
+ * MAC driver system settings.
+ */
+#define STM32_MAC_TRANSMIT_BUFFERS          2
+#define STM32_MAC_RECEIVE_BUFFERS           4
+#define STM32_MAC_BUFFERS_SIZE              1522
+#define STM32_MAC_PHY_TIMEOUT               100
+#define STM32_MAC_ETH1_CHANGE_PHY_STATE     TRUE
+#define STM32_MAC_ETH1_IRQ_PRIORITY         13
+#define STM32_MAC_IP_CHECKSUM_OFFLOAD       0
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_USE_TIM9                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+#define STM32_PWM_TIM9_IRQ_PRIORITY         7
+
+/*
+ * SDC driver system settings.
+ */
+#define STM32_SDC_SDIO_DMA_PRIORITY         3
+#define STM32_SDC_SDIO_IRQ_PRIORITY         9
+#define STM32_SDC_WRITE_TIMEOUT_MS          250
+#define STM32_SDC_READ_TIMEOUT_MS           25
+#define STM32_SDC_CLOCK_ACTIVATION_DELAY    10
+#define STM32_SDC_SDIO_UNALIGNED_SUPPORT    TRUE
+#define STM32_SDC_SDIO_DMA_STREAM           STM32_DMA_STREAM_ID(2, 3)
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USE_USART6             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+#define STM32_SERIAL_USART6_PRIORITY        12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USE_UART4                FALSE
+#define STM32_UART_USE_UART5                FALSE
+#define STM32_UART_USE_USART6               FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART3_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 1)
+#define STM32_UART_USART3_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_UART4_IRQ_PRIORITY       12
+#define STM32_UART_UART5_IRQ_PRIORITY       12
+#define STM32_UART_USART6_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_UART4_DMA_PRIORITY       0
+#define STM32_UART_UART5_DMA_PRIORITY       0
+#define STM32_UART_USART6_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1                  FALSE
+#define STM32_USB_USE_OTG2                  FALSE
+#define STM32_USB_OTG1_IRQ_PRIORITY         14
+#define STM32_USB_OTG2_IRQ_PRIORITY         14
+#define STM32_USB_OTG1_RX_FIFO_SIZE         512
+#define STM32_USB_OTG2_RX_FIFO_SIZE         1024
+#define STM32_USB_OTG_THREAD_PRIO           LOWPRIO
+#define STM32_USB_OTG_THREAD_STACK_SIZE     128
+#define STM32_USB_OTGFIFO_FILL_BASEPRI      0
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/readme.txt
new file mode 100644
index 0000000..9645ead
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F207-DISCOVERY/readme.txt
@@ -0,0 +1,26 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M3 STM32F207.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST STM32F2-Discovery board, a non existing board, the demo
+is meant as project template for the STM32F2xx.
+
+** The Demo **
+
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO. just modify the TRGT line in the makefile in order to use
+different GCC toolchains.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/.cproject
new file mode 100644
index 0000000..7c5acb1
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/.cproject
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.603687198">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.603687198" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.603687198" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.603687198." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963.1446538340" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1490952991" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1134067298" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1927705259" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1013764026" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1367371861" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1824820452" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1584496456" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1781547795" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F302R8-NUCLEO.null.1004513353" name="RT-STM32F302R8-NUCLEO"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.603687198">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32F302R8-NUCLEO"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/.project
new file mode 100644
index 0000000..40c5fce
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F302R8-NUCLEO</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_NUCLEO_F302R8</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/Makefile
new file mode 100644
index 0000000..fc95cd9
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f3xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F3xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_NUCLEO_F302R8/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F302x8.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/chconf.h
new file mode 100644
index 0000000..7d99062
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/debug/RT-STM32F302R8-NUCLEO (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/debug/RT-STM32F302R8-NUCLEO (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..8a8ead8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/debug/RT-STM32F302R8-NUCLEO (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F302R8-NUCLEO\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F302R8-NUCLEO"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F302R8-NUCLEO"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/main.c
new file mode 100644
index 0000000..c5c191c
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/main.c
@@ -0,0 +1,71 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * Red LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palClearPad(GPIOB, GPIOB_LED_GREEN);
+    chThdSleepMilliseconds(500);
+    palSetPad(GPIOB, GPIOB_LED_GREEN);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 2 using the driver default configuration.
+   */
+  sdStart(&SD2, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (!palReadPad(GPIOC, GPIOC_BUTTON))
+      TestThread(&SD2);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/mcuconf.h
new file mode 100644
index 0000000..87669d9
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/mcuconf.h
@@ -0,0 +1,200 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F3xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F3xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADC12PRES                     STM32_ADC12PRES_DIV1
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_USART2SW                      STM32_USART2SW_PCLK
+#define STM32_USART3SW                      STM32_USART3SW_PCLK
+#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
+#define STM32_TIM1SW                        STM32_TIM1SW_PCLK2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_COMPACT_SAMPLES           FALSE
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC12_IRQ_PRIORITY        5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC12_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              TRUE
+#define STM32_DAC_USE_DAC1_CH2              TRUE
+#define STM32_DAC_USE_DAC2_CH1              TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC2_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC2_CH1_DMA_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI30_32_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI33_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         10
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/readme.txt
new file mode 100644
index 0000000..b70e11f
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F302R8-NUCLEO/readme.txt
@@ -0,0 +1,27 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 STM32F302.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST_NUCLEO_F302R8 board.
+
+** The Demo **
+
+The demo flashes the board LED using a thread, by pressing the button located
+on the board the test procedure is activated with output on the serial port
+SD2 (USART2, mapped on USB virtual COM port).
+
+** Build Procedure **
+
+The demo has been tested by using the ChibiStudio GCC-based toolchain
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/.cproject
new file mode 100644
index 0000000..644f14e
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/.cproject
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.1984968159">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1984968159" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.1984968159" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.1984968159." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.688272362" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.688272362.270307390" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1075495684" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1667039593" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1490155624" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1745864609" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1771767067" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.232441590" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1677220503" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.2124347918" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F303-DISCOVERY.null.1212300359" name="RT-STM32F303-DISCOVERY"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.1984968159">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32F303-DISCOVERY"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/.project
new file mode 100644
index 0000000..7370bd9
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/.project
@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F303-DISCOVERY</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/Makefile
new file mode 100644
index 0000000..0c32ac9
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f3xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F3xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F3_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F303xC.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/chconf.h
new file mode 100644
index 0000000..211233d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/chconf.h
@@ -0,0 +1,498 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/debug/RT-STM32F303-DISCOVERY (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/debug/RT-STM32F303-DISCOVERY (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..66d46ab
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/debug/RT-STM32F303-DISCOVERY (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F303-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F303-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F303-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/iar/ch.ewp b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/iar/ch.ewp
new file mode 100644
index 0000000..53cd02d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/iar/ch.ewp
@@ -0,0 +1,2607 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<project>
+  <fileVersion>2</fileVersion>
+  <configuration>
+    <name>Debug</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>1</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>24</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>ExePath</name>
+          <state>Debug\Exe</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>Debug\Obj</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>Debug\List</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>6</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>5.10.0.159</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.50.2.10499</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>STM32F303xC	ST STM32F303xC</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>22</version>
+          <state>40</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CoreVariant</name>
+          <version>22</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GFPUDeviceSlave</name>
+          <state>STM32F303xC	ST STM32F303xC</state>
+        </option>
+        <option>
+          <name>FPU2</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>NrRegs</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>NEON</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave2</name>
+          <version>22</version>
+          <state>39</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>00000000</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\common\ports\ARMCMx\devices\STM32F3xx</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\ext\CMSIS\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\ext\CMSIS\ST\STM32F3xx</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\rt\ports\ARMCMx</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\rt\ports\ARMCMx\compilers\IAR</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\rt\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\osal\rt</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\boards\ST_STM32F3_DISCOVERY</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\common\ARMCMx</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\STM32F3xx</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\ADCv3</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\CANv1</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\DMAv1</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\EXTIv1</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\GPIOv2</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\I2Cv2</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\RTCv2</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\SPIv2</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\TIMv1</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\USARTv2</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\USBv1</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\xWDGv1</state>
+          <state>$PROJ_DIR$\..\..\..\..\test\rt</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ADefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\common\ports\ARMCMx\devices\STM32F3xx</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\rt\ports\ARMCMx</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>3</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ch.srec</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+        <hasPrio>0</hasPrio>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ch.out</state>
+        </option>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+          <state>$PROJ_DIR$\ch.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>1</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>
+  <configuration>
+    <name>Release</name>
+    <toolchain>
+      <name>ARM</name>
+    </toolchain>
+    <debug>0</debug>
+    <settings>
+      <name>General</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <version>24</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>ExePath</name>
+          <state>Release\Exe</state>
+        </option>
+        <option>
+          <name>ObjPath</name>
+          <state>Release\Obj</state>
+        </option>
+        <option>
+          <name>ListPath</name>
+          <state>Release\List</state>
+        </option>
+        <option>
+          <name>GEndianMode</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>Input variant</name>
+          <version>3</version>
+          <state>6</state>
+        </option>
+        <option>
+          <name>Input description</name>
+          <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
+        </option>
+        <option>
+          <name>Output variant</name>
+          <version>2</version>
+          <state>7</state>
+        </option>
+        <option>
+          <name>Output description</name>
+          <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
+        </option>
+        <option>
+          <name>GOutputBinary</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGCoreOrChip</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelect</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GRuntimeLibSelectSlave</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>RTDescription</name>
+          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
+        </option>
+        <option>
+          <name>OGProductVersion</name>
+          <state>5.10.0.159</state>
+        </option>
+        <option>
+          <name>OGLastSavedByProductVersion</name>
+          <state>7.50.2.10499</state>
+        </option>
+        <option>
+          <name>GeneralEnableMisra</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraVerbose</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGChipSelectEditMenu</name>
+          <state>STM32F303xC	ST STM32F303xC</state>
+        </option>
+        <option>
+          <name>GenLowLevelInterface</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>GEndianModeBE</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OGBufferedTerminalOutput</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GenStdoutInterface</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>GeneralMisraVer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GeneralMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>RTConfigPath2</name>
+          <state>$TOOLKIT_DIR$\INC\c\DLib_Config_Normal.h</state>
+        </option>
+        <option>
+          <name>GBECoreSlave</name>
+          <version>22</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>OGUseCmsis</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OGUseCmsisDspLib</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GRuntimeLibThreads</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CoreVariant</name>
+          <version>22</version>
+          <state>39</state>
+        </option>
+        <option>
+          <name>GFPUDeviceSlave</name>
+          <state>STM32F303xC	ST STM32F303xC</state>
+        </option>
+        <option>
+          <name>FPU2</name>
+          <version>0</version>
+          <state>4</state>
+        </option>
+        <option>
+          <name>NrRegs</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>NEON</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>GFPUCoreSlave2</name>
+          <version>22</version>
+          <state>39</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>ICCARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>31</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>CCOptimizationNoSizeConstraints</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCPreprocFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocComments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPreprocLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMnemonics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListCMessages</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCListAssSource</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagSuppress</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagRemark</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagWarning</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCDiagError</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCAllowList</name>
+          <version>1</version>
+          <state>11111110</state>
+        </option>
+        <option>
+          <name>CCDebugInfo</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IEndianMode</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IExtraOptionsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CCLangConformance</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCSignedPlainChar</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCRequirePrototypes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCDiagWarnAreErr</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCompilerRuntimeInfo</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>CCLibConfigHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>PreInclude</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CompilerMisraOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCIncludePath2</name>
+          <state>$PROJ_DIR$\..\</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\common\ports\ARMCMx\devices\STM32F3xx</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\ext\CMSIS\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\ext\CMSIS\ST\STM32F3xx</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\rt\ports\ARMCMx</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\rt\ports\ARMCMx\compilers\IAR</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\rt\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\osal\rt</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\include</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\boards\ST_STM32F3_DISCOVERY</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\common\ARMCMx</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\STM32F3xx</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\ADCv3</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\CANv1</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\DMAv1</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\EXTIv1</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\GPIOv2</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\I2Cv2</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\RTCv2</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\SPIv2</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\TIMv1</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\USARTv2</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\USBv1</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\xWDGv1</state>
+          <state>$PROJ_DIR$\..\..\..\..\test\rt</state>
+        </option>
+        <option>
+          <name>CCStdIncCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCCodeSection</name>
+          <state>.text</state>
+        </option>
+        <option>
+          <name>IInterwork2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IProcessorMode2</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CCOptLevel</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CCOptStrategy</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptLevelSlave</name>
+          <state>3</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules98</name>
+          <version>0</version>
+          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
+        </option>
+        <option>
+          <name>CompilerMisraRules04</name>
+          <version>0</version>
+          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
+        </option>
+        <option>
+          <name>CCPosIndRopi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndRwpi</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCPosIndNoDynInit</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccLang</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccAllowVLA</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCppDialect</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccExceptions</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccRTTI</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccStaticDestr</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccCppInlineSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IccCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IccFloatSemantics</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCNoLiteralPool</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCOptStrategySlave</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CCGuardCalls</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>AARM</name>
+      <archiveVersion>2</archiveVersion>
+      <data>
+        <version>9</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>AObjPrefix</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AEndian</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>ACaseSensitivity</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacroChars</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnWhat</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AWarnOne</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange1</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AWarnRange2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>ADebug</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AltRegisterNames</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ADefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AList</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AListHeader</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AListing</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>Includes</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacDefs</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MacExps</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>MacExec</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OnlyAssed</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>MultiLine</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLengthCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>PageLength</name>
+          <state>80</state>
+        </option>
+        <option>
+          <name>TabSpacing</name>
+          <state>8</state>
+        </option>
+        <option>
+          <name>AXRef</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDefines</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefInternal</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AXRefDual</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AFpuProcessor</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>AOutputFile</name>
+          <state>$FILE_BNAME$.o</state>
+        </option>
+        <option>
+          <name>AMultibyteSupport</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsCheck</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>ALimitErrorsEdit</name>
+          <state>100</state>
+        </option>
+        <option>
+          <name>AIgnoreStdInclude</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AUserIncludes</name>
+          <state>$PROJ_DIR$\..</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\common\ports\ARMCMx\devices\STM32F3xx</state>
+          <state>$PROJ_DIR$\..\..\..\..\os\rt\ports\ARMCMx</state>
+        </option>
+        <option>
+          <name>AExtraOptionsCheckV2</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>AExtraOptionsV2</name>
+          <state></state>
+        </option>
+        <option>
+          <name>AsmNoLiteralPool</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>OBJCOPY</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>1</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>OOCOutputFormat</name>
+          <version>3</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OCOutputOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>OOCOutputFile</name>
+          <state>ch.srec</state>
+        </option>
+        <option>
+          <name>OOCCommandLineProducer</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>OOCObjCopyEnable</name>
+          <state>0</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>CUSTOM</name>
+      <archiveVersion>3</archiveVersion>
+      <data>
+        <extensions></extensions>
+        <cmdline></cmdline>
+        <hasPrio>0</hasPrio>
+      </data>
+    </settings>
+    <settings>
+      <name>BICOMP</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+    <settings>
+      <name>BUILDACTION</name>
+      <archiveVersion>1</archiveVersion>
+      <data>
+        <prebuild></prebuild>
+        <postbuild></postbuild>
+      </data>
+    </settings>
+    <settings>
+      <name>ILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>16</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IlinkOutputFile</name>
+          <state>ch.out</state>
+        </option>
+        <option>
+          <name>IlinkLibIOConfig</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>XLinkMisraHandler</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkInputFileSlave</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkDebugInfoEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkKeepSymbols</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySymbol</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinarySegment</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkRawBinaryAlign</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkConfigDefines</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkMapFile</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkLogFile</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogInitialization</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogModule</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogSection</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogVeneer</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIcfOverride</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkIcfFile</name>
+          <state>$PROJ_DIR$\ch.icf</state>
+        </option>
+        <option>
+          <name>IlinkIcfFileSlave</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkEnableRemarks</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkSuppressDiags</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsRem</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsWarn</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkTreatAsErr</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkWarningsAreErrors</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkUseExtraOptions</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkExtraOptions</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkLowLevelInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAutoLibEnable</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkAdditionalLibs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkOverrideProgramEntryLabel</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabelSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkProgramEntryLabel</name>
+          <state>__iar_program_start</state>
+        </option>
+        <option>
+          <name>DoFill</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>FillerByte</name>
+          <state>0xFF</state>
+        </option>
+        <option>
+          <name>FillerStart</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>FillerEnd</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>CrcSize</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcAlign</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcPoly</name>
+          <state>0x11021</state>
+        </option>
+        <option>
+          <name>CrcCompl</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcBitOrder</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>CrcInitialValue</name>
+          <state>0x0</state>
+        </option>
+        <option>
+          <name>DoCrc</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkBE8Slave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkBufferedTerminalOutput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkStdoutInterfaceSlave</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcFullSize</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkIElfToolPostProcess</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogAutoLibSelect</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogRedirSymbols</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkLogUnusedFragments</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcReverseByteOrder</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCrcUseAsInput</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptInline</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsAllow</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptExceptionsForce</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkCmsis</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptMergeDuplSections</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkOptUseVfe</name>
+          <state>1</state>
+        </option>
+        <option>
+          <name>IlinkOptForceVfe</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackAnalysisEnable</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkStackControlFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IlinkStackCallGraphFile</name>
+          <state></state>
+        </option>
+        <option>
+          <name>CrcAlgorithm</name>
+          <version>0</version>
+          <state>1</state>
+        </option>
+        <option>
+          <name>CrcUnitSize</name>
+          <version>0</version>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IlinkThreadsSlave</name>
+          <state>1</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>IARCHIVE</name>
+      <archiveVersion>0</archiveVersion>
+      <data>
+        <version>0</version>
+        <wantNonLocal>1</wantNonLocal>
+        <debug>0</debug>
+        <option>
+          <name>IarchiveInputs</name>
+          <state></state>
+        </option>
+        <option>
+          <name>IarchiveOverride</name>
+          <state>0</state>
+        </option>
+        <option>
+          <name>IarchiveOutput</name>
+          <state>###Unitialized###</state>
+        </option>
+      </data>
+    </settings>
+    <settings>
+      <name>BILINK</name>
+      <archiveVersion>0</archiveVersion>
+      <data/>
+    </settings>
+  </configuration>
+  <mfc>
+    <configuration>Release</configuration>
+  </mfc>
+  <group>
+    <name>os</name>
+    <group>
+      <name>common</name>
+      <group>
+        <name>ports</name>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\common\ports\ARMCMx\devices\STM32F3xx\cmparams.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\common\ports\ARMCMx\compilers\IAR\cstartup.s</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\common\ports\ARMCMx\compilers\IAR\vectors.s</name>
+        </file>
+      </group>
+    </group>
+    <group>
+      <name>ext</name>
+      <group>
+        <name>CMSIS</name>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\ext\CMSIS\include\core_cm4.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\ext\CMSIS\include\core_cm4_simd.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\ext\CMSIS\include\core_cmFunc.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\ext\CMSIS\include\core_cmInstr.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\ext\CMSIS\ST\stm32f3xx.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\ext\CMSIS\ST\system_stm32f3xx.h</name>
+        </file>
+      </group>
+    </group>
+    <group>
+      <name>hal</name>
+      <group>
+        <name>board</name>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\boards\ST_STM32F3_DISCOVERY\board.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\boards\ST_STM32F3_DISCOVERY\board.h</name>
+        </file>
+      </group>
+      <group>
+        <name>include</name>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\adc.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\can.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\dac.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\ext.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\gpt.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\hal.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\hal_buffers.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\hal_channels.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\hal_files.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\hal_ioblock.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\hal_mmcsd.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\hal_queues.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\hal_streams.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\i2c.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\i2s.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\icu.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\mac.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\mii.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\mmc_spi.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\pal.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\pwm.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\rtc.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\sdc.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\serial.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\serial_usb.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\spi.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\st.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\uart.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\usb.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\include\wdg.h</name>
+        </file>
+      </group>
+      <group>
+        <name>lib</name>
+        <group>
+          <name>streams</name>
+          <file>
+            <name>$PROJ_DIR$\..\..\..\..\os\hal\lib\streams\chprintf.c</name>
+          </file>
+          <file>
+            <name>$PROJ_DIR$\..\..\..\..\os\hal\lib\streams\chprintf.h</name>
+          </file>
+          <file>
+            <name>$PROJ_DIR$\..\..\..\..\os\hal\lib\streams\memstreams.c</name>
+          </file>
+          <file>
+            <name>$PROJ_DIR$\..\..\..\..\os\hal\lib\streams\memstreams.h</name>
+          </file>
+        </group>
+      </group>
+      <group>
+        <name>port</name>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\ADCv1\adc_lld.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\ADCv1\adc_lld.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\CANv1\can_lld.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\CANv1\can_lld.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\DACv1\dac_lld.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\DACv1\dac_lld.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\EXTIv1\ext_lld.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\EXTIv1\ext_lld.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\STM32F3xx\ext_lld_isr.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\STM32F3xx\ext_lld_isr.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\TIMv1\gpt_lld.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\TIMv1\gpt_lld.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\STM32F3xx\hal_lld.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\STM32F3xx\hal_lld.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\I2Cv2\i2c_lld.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\I2Cv2\i2c_lld.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\TIMv1\icu_lld.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\TIMv1\icu_lld.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\common\ARMCMx\nvic.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\common\ARMCMx\nvic.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\GPIOv2\pal_lld.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\GPIOv2\pal_lld.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\TIMv1\pwm_lld.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\TIMv1\pwm_lld.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\RTCv2\rtc_lld.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\RTCv2\rtc_lld.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\USARTv2\serial_lld.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\USARTv2\serial_lld.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\SPIv2\spi_lld.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\SPIv2\spi_lld.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\TIMv1\st_lld.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\TIMv1\st_lld.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\DMAv1\stm32_dma.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\DMAv1\stm32_dma.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\STM32F3xx\stm32_isr.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\STM32F3xx\stm32_rcc.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\STM32F3xx\stm32_registry.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\TIMv1\stm32_tim.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\USBv1\stm32_usb.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\USARTv2\uart_lld.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\USARTv2\uart_lld.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\USBv1\usb_lld.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\USBv1\usb_lld.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\xWDGv1\wdg_lld.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\ports\STM32\LLD\xWDGv1\wdg_lld.h</name>
+        </file>
+      </group>
+      <group>
+        <name>src</name>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\adc.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\can.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\dac.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\ext.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\gpt.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\hal.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\hal_buffers.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\hal_mmcsd.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\hal_queues.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\i2c.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\i2s.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\icu.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\mac.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\mmc_spi.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\pal.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\pwm.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\rtc.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\sdc.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\serial.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\serial_usb.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\spi.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\st.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\uart.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\usb.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\hal\src\wdg.c</name>
+        </file>
+      </group>
+    </group>
+    <group>
+      <name>rt</name>
+      <group>
+        <name>include</name>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\ch.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chbsem.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chcond.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chdebug.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chdynamic.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chevents.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chheap.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chmboxes.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chmemcore.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chmempools.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chmsg.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chmtx.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chqueues.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chregistry.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chschd.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chsem.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chstats.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chstreams.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chsys.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chthreads.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chtm.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\include\chvt.h</name>
+        </file>
+      </group>
+      <group>
+        <name>port</name>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\ports\ARMCMx\chcore.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\ports\ARMCMx\chcore.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\ports\ARMCMx\chcore_timer.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\ports\ARMCMx\chcore_v7m.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\ports\ARMCMx\chcore_v7m.h</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\ports\ARMCMx\compilers\IAR\chcoreasm_v7m.s</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\ports\ARMCMx\compilers\IAR\chtypes.h</name>
+        </file>
+      </group>
+      <group>
+        <name>src</name>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\src\chcond.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\src\chdebug.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\src\chdynamic.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\src\chevents.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\src\chheap.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\src\chmboxes.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\src\chmemcore.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\src\chmempools.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\src\chmsg.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\src\chmtx.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\src\chqueues.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\src\chregistry.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\src\chschd.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\src\chsem.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\src\chstats.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\src\chsys.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\src\chthreads.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\src\chtm.c</name>
+        </file>
+        <file>
+          <name>$PROJ_DIR$\..\..\..\..\os\rt\src\chvt.c</name>
+        </file>
+      </group>
+    </group>
+    <group>
+      <name>various</name>
+    </group>
+  </group>
+  <group>
+    <name>test</name>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\test.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\test.h</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testbmk.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testbmk.h</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testdyn.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testdyn.h</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testevt.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testevt.h</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testheap.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testheap.h</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testmbox.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testmbox.h</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testmsg.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testmsg.h</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testmtx.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testmtx.h</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testpools.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testpools.h</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testqueues.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testqueues.h</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testsem.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testsem.h</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testsys.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testsys.h</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testthd.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\..\..\test\rt\testthd.h</name>
+    </file>
+  </group>
+  <file>
+    <name>$PROJ_DIR$\..\chconf.h</name>
+  </file>
+  <file>
+    <name>$PROJ_DIR$\..\halconf.h</name>
+  </file>
+  <file>
+    <name>$PROJ_DIR$\..\main.c</name>
+  </file>
+  <file>
+    <name>$PROJ_DIR$\..\mcuconf.h</name>
+  </file>
+</project>
+
+
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/iar/ch.eww b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/iar/ch.eww
new file mode 100644
index 0000000..f9b3b20
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/iar/ch.eww
@@ -0,0 +1,10 @@
+<?xml version="1.0" encoding="iso-8859-1"?>
+
+<workspace>
+  <project>
+    <path>$WS_DIR$\ch.ewp</path>
+  </project>
+  <batchBuild/>
+</workspace>
+
+
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/iar/ch.icf b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/iar/ch.icf
new file mode 100644
index 0000000..01271e9
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/iar/ch.icf
@@ -0,0 +1,39 @@
+/*###ICF### Section handled by ICF editor, don't touch! ****/
+/*-Editor annotation file-*/
+/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
+/*-Specials-*/
+define symbol __ICFEDIT_intvec_start__ = 0x08000000;
+/*-Memory Regions-*/
+define symbol __ICFEDIT_region_ROM_start__ = 0x08000000;
+define symbol __ICFEDIT_region_ROM_end__   = 0x0803FFFF;
+define symbol __ICFEDIT_region_RAM_start__ = 0x20000000;
+define symbol __ICFEDIT_region_RAM_end__   = 0x20009FFF;
+/*-Sizes-*/
+define symbol __ICFEDIT_size_cstack__ = 0x400;
+define symbol __ICFEDIT_size_heap__   = 0x400;
+/**** End of ICF editor section. ###ICF###*/
+
+/* Size of the IRQ Stack (Main Stack).*/
+define symbol __ICFEDIT_size_irqstack__   = 0x400;
+
+define memory mem with size = 4G;
+define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
+define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
+
+define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   {section CSTACK};
+define block IRQSTACK  with alignment = 8, size = __ICFEDIT_size_irqstack__ {};
+define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     {};
+define block SYSHEAP   with alignment = 8                                   {section SYSHEAP};
+define block DATABSS with alignment = 8 {readwrite, zeroinit};
+
+initialize by copy { readwrite };
+do not initialize  { section .noinit };
+
+keep { section .intvec };
+
+place at address mem:__ICFEDIT_intvec_start__ {section .intvec};
+place in ROM_region                           {readonly};
+place at start of RAM_region                  {block IRQSTACK};
+place in RAM_region                           {block DATABSS, block HEAP};
+place in RAM_region                           {block SYSHEAP};
+place at end of RAM_region                    {block CSTACK};
+\ No newline at end of file
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/keil/ch.uvprojx b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/keil/ch.uvprojx
new file mode 100644
index 0000000..8dcc107
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/keil/ch.uvprojx
@@ -0,0 +1,1396 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
+<Project xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="project_projx.xsd">
+
+  <SchemaVersion>2.1</SchemaVersion>
+
+  <Header>### uVision Project, (C) Keil Software</Header>
+
+  <Targets>
+    <Target>
+      <TargetName>Demo</TargetName>
+      <ToolsetNumber>0x4</ToolsetNumber>
+      <ToolsetName>ARM-ADS</ToolsetName>
+      <TargetOption>
+        <TargetCommonOption>
+          <Device>STM32F303VC</Device>
+          <Vendor>STMicroelectronics</Vendor>
+          <PackID>Keil.STM32F3xx_DFP.1.3.0</PackID>
+          <PackURL>http://www.keil.com/pack/</PackURL>
+          <Cpu>IROM(0x08000000,0x40000) IRAM(0x20000000,0xC000) IRAM2(0x10000000,0x2000) CPUTYPE("Cortex-M4") FPU2 CLOCK(72000000) ELITTLE</Cpu>
+          <FlashUtilSpec></FlashUtilSpec>
+          <StartupFile></StartupFile>
+          <FlashDriverDll>UL2CM3(-S0 -C0 -P0 -FD20000000 -FC1000 -FN1 -FF0STM32F3xx_256 -FS08000000 -FL040000 -FP0($$Device:STM32F303VC$Flash\STM32F3xx_256.FLM))</FlashDriverDll>
+          <DeviceId>6331</DeviceId>
+          <RegisterFile>$$Device:STM32F303VC$Device\Include\STM32F3xx.h</RegisterFile>
+          <MemoryEnv></MemoryEnv>
+          <Cmp></Cmp>
+          <Asm></Asm>
+          <Linker></Linker>
+          <OHString></OHString>
+          <InfinionOptionDll></InfinionOptionDll>
+          <SLE66CMisc></SLE66CMisc>
+          <SLE66AMisc></SLE66AMisc>
+          <SLE66LinkerMisc></SLE66LinkerMisc>
+          <SFDFile>$$Device:STM32F303VC$SVD\STM32F3xx.svd</SFDFile>
+          <bCustSvd>0</bCustSvd>
+          <UseEnv>0</UseEnv>
+          <BinPath></BinPath>
+          <IncludePath></IncludePath>
+          <LibPath></LibPath>
+          <RegisterFilePath></RegisterFilePath>
+          <DBRegisterFilePath></DBRegisterFilePath>
+          <TargetStatus>
+            <Error>0</Error>
+            <ExitCodeStop>0</ExitCodeStop>
+            <ButtonStop>0</ButtonStop>
+            <NotGenerated>0</NotGenerated>
+            <InvalidFlash>1</InvalidFlash>
+          </TargetStatus>
+          <OutputDirectory>.\obj\</OutputDirectory>
+          <OutputName>ch</OutputName>
+          <CreateExecutable>1</CreateExecutable>
+          <CreateLib>0</CreateLib>
+          <CreateHexFile>1</CreateHexFile>
+          <DebugInformation>1</DebugInformation>
+          <BrowseInformation>1</BrowseInformation>
+          <ListingPath>.\lst\</ListingPath>
+          <HexFormatSelection>1</HexFormatSelection>
+          <Merge32K>0</Merge32K>
+          <CreateBatchFile>0</CreateBatchFile>
+          <BeforeCompile>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopU1X>0</nStopU1X>
+            <nStopU2X>0</nStopU2X>
+          </BeforeCompile>
+          <BeforeMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopB1X>0</nStopB1X>
+            <nStopB2X>0</nStopB2X>
+          </BeforeMake>
+          <AfterMake>
+            <RunUserProg1>0</RunUserProg1>
+            <RunUserProg2>0</RunUserProg2>
+            <UserProg1Name></UserProg1Name>
+            <UserProg2Name></UserProg2Name>
+            <UserProg1Dos16Mode>0</UserProg1Dos16Mode>
+            <UserProg2Dos16Mode>0</UserProg2Dos16Mode>
+            <nStopA1X>0</nStopA1X>
+            <nStopA2X>0</nStopA2X>
+          </AfterMake>
+          <SelectedForBatchBuild>0</SelectedForBatchBuild>
+          <SVCSIdString></SVCSIdString>
+        </TargetCommonOption>
+        <CommonProperty>
+          <UseCPPCompiler>0</UseCPPCompiler>
+          <RVCTCodeConst>0</RVCTCodeConst>
+          <RVCTZI>0</RVCTZI>
+          <RVCTOtherData>0</RVCTOtherData>
+          <ModuleSelection>0</ModuleSelection>
+          <IncludeInBuild>1</IncludeInBuild>
+          <AlwaysBuild>0</AlwaysBuild>
+          <GenerateAssemblyFile>0</GenerateAssemblyFile>
+          <AssembleAssemblyFile>0</AssembleAssemblyFile>
+          <PublicsOnly>0</PublicsOnly>
+          <StopOnExitCode>3</StopOnExitCode>
+          <CustomArgument></CustomArgument>
+          <IncludeLibraryModules></IncludeLibraryModules>
+          <ComprImg>1</ComprImg>
+        </CommonProperty>
+        <DllOption>
+          <SimDllName>SARMCM3.DLL</SimDllName>
+          <SimDllArguments> -REMAP -MPU</SimDllArguments>
+          <SimDlgDll>DCM.DLL</SimDlgDll>
+          <SimDlgDllArguments>-pCM4</SimDlgDllArguments>
+          <TargetDllName>SARMCM3.DLL</TargetDllName>
+          <TargetDllArguments> -MPU</TargetDllArguments>
+          <TargetDlgDll>TCM.DLL</TargetDlgDll>
+          <TargetDlgDllArguments>-pCM4</TargetDlgDllArguments>
+        </DllOption>
+        <DebugOption>
+          <OPTHX>
+            <HexSelection>1</HexSelection>
+            <HexRangeLowAddress>0</HexRangeLowAddress>
+            <HexRangeHighAddress>0</HexRangeHighAddress>
+            <HexOffset>0</HexOffset>
+            <Oh166RecLen>16</Oh166RecLen>
+          </OPTHX>
+          <Simulator>
+            <UseSimulator>0</UseSimulator>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>1</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <LimitSpeedToRealTime>0</LimitSpeedToRealTime>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Simulator>
+          <Target>
+            <UseTarget>1</UseTarget>
+            <LoadApplicationAtStartup>1</LoadApplicationAtStartup>
+            <RunToMain>1</RunToMain>
+            <RestoreBreakpoints>1</RestoreBreakpoints>
+            <RestoreWatchpoints>1</RestoreWatchpoints>
+            <RestoreMemoryDisplay>1</RestoreMemoryDisplay>
+            <RestoreFunctions>0</RestoreFunctions>
+            <RestoreToolbox>1</RestoreToolbox>
+            <RestoreTracepoints>1</RestoreTracepoints>
+            <RestoreSysVw>1</RestoreSysVw>
+          </Target>
+          <RunDebugAfterBuild>0</RunDebugAfterBuild>
+          <TargetSelection>11</TargetSelection>
+          <SimDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+          </SimDlls>
+          <TargetDlls>
+            <CpuDll></CpuDll>
+            <CpuDllArguments></CpuDllArguments>
+            <PeripheralDll></PeripheralDll>
+            <PeripheralDllArguments></PeripheralDllArguments>
+            <InitializationFile></InitializationFile>
+            <Driver>STLink\ST-LINKIII-KEIL_SWO.dll</Driver>
+          </TargetDlls>
+        </DebugOption>
+        <Utilities>
+          <Flash1>
+            <UseTargetDll>1</UseTargetDll>
+            <UseExternalTool>0</UseExternalTool>
+            <RunIndependent>0</RunIndependent>
+            <UpdateFlashBeforeDebugging>1</UpdateFlashBeforeDebugging>
+            <Capability>1</Capability>
+            <DriverSelection>4104</DriverSelection>
+          </Flash1>
+          <bUseTDR>1</bUseTDR>
+          <Flash2>STLink\ST-LINKIII-KEIL_SWO.dll</Flash2>
+          <Flash3>"" ()</Flash3>
+          <Flash4></Flash4>
+          <pFcarmOut></pFcarmOut>
+          <pFcarmGrp></pFcarmGrp>
+          <pFcArmRoot></pFcArmRoot>
+          <FcArmLst>0</FcArmLst>
+        </Utilities>
+        <TargetArmAds>
+          <ArmAdsMisc>
+            <GenerateListings>0</GenerateListings>
+            <asHll>1</asHll>
+            <asAsm>1</asAsm>
+            <asMacX>1</asMacX>
+            <asSyms>1</asSyms>
+            <asFals>1</asFals>
+            <asDbgD>1</asDbgD>
+            <asForm>1</asForm>
+            <ldLst>0</ldLst>
+            <ldmm>1</ldmm>
+            <ldXref>1</ldXref>
+            <BigEnd>0</BigEnd>
+            <AdsALst>1</AdsALst>
+            <AdsACrf>1</AdsACrf>
+            <AdsANop>0</AdsANop>
+            <AdsANot>0</AdsANot>
+            <AdsLLst>1</AdsLLst>
+            <AdsLmap>1</AdsLmap>
+            <AdsLcgr>1</AdsLcgr>
+            <AdsLsym>1</AdsLsym>
+            <AdsLszi>1</AdsLszi>
+            <AdsLtoi>1</AdsLtoi>
+            <AdsLsun>1</AdsLsun>
+            <AdsLven>1</AdsLven>
+            <AdsLsxf>1</AdsLsxf>
+            <RvctClst>0</RvctClst>
+            <GenPPlst>0</GenPPlst>
+            <AdsCpuType>"Cortex-M4"</AdsCpuType>
+            <RvctDeviceName></RvctDeviceName>
+            <mOS>0</mOS>
+            <uocRom>0</uocRom>
+            <uocRam>0</uocRam>
+            <hadIROM>1</hadIROM>
+            <hadIRAM>1</hadIRAM>
+            <hadXRAM>0</hadXRAM>
+            <uocXRam>0</uocXRam>
+            <RvdsVP>2</RvdsVP>
+            <hadIRAM2>1</hadIRAM2>
+            <hadIROM2>0</hadIROM2>
+            <StupSel>8</StupSel>
+            <useUlib>0</useUlib>
+            <EndSel>0</EndSel>
+            <uLtcg>0</uLtcg>
+            <RoSelD>3</RoSelD>
+            <RwSelD>3</RwSelD>
+            <CodeSel>0</CodeSel>
+            <OptFeed>0</OptFeed>
+            <NoZi1>0</NoZi1>
+            <NoZi2>0</NoZi2>
+            <NoZi3>0</NoZi3>
+            <NoZi4>0</NoZi4>
+            <NoZi5>1</NoZi5>
+            <Ro1Chk>0</Ro1Chk>
+            <Ro2Chk>0</Ro2Chk>
+            <Ro3Chk>0</Ro3Chk>
+            <Ir1Chk>1</Ir1Chk>
+            <Ir2Chk>0</Ir2Chk>
+            <Ra1Chk>0</Ra1Chk>
+            <Ra2Chk>0</Ra2Chk>
+            <Ra3Chk>0</Ra3Chk>
+            <Im1Chk>1</Im1Chk>
+            <Im2Chk>1</Im2Chk>
+            <OnChipMemories>
+              <Ocm1>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm1>
+              <Ocm2>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm2>
+              <Ocm3>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm3>
+              <Ocm4>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm4>
+              <Ocm5>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm5>
+              <Ocm6>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </Ocm6>
+              <IRAM>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0xc000</Size>
+              </IRAM>
+              <IROM>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x40000</Size>
+              </IROM>
+              <XRAM>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </XRAM>
+              <OCR_RVCT1>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT1>
+              <OCR_RVCT2>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT2>
+              <OCR_RVCT3>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT3>
+              <OCR_RVCT4>
+                <Type>1</Type>
+                <StartAddress>0x8000000</StartAddress>
+                <Size>0x40000</Size>
+              </OCR_RVCT4>
+              <OCR_RVCT5>
+                <Type>1</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT5>
+              <OCR_RVCT6>
+                <Type>0</Type>
+                <StartAddress>0x10000000</StartAddress>
+                <Size>0x2000</Size>
+              </OCR_RVCT6>
+              <OCR_RVCT7>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT7>
+              <OCR_RVCT8>
+                <Type>0</Type>
+                <StartAddress>0x0</StartAddress>
+                <Size>0x0</Size>
+              </OCR_RVCT8>
+              <OCR_RVCT9>
+                <Type>0</Type>
+                <StartAddress>0x20000000</StartAddress>
+                <Size>0xa000</Size>
+              </OCR_RVCT9>
+              <OCR_RVCT10>
+                <Type>0</Type>
+                <StartAddress>0x2000a000</StartAddress>
+                <Size>0x1</Size>
+              </OCR_RVCT10>
+            </OnChipMemories>
+            <RvctStartVector></RvctStartVector>
+          </ArmAdsMisc>
+          <Cads>
+            <interw>1</interw>
+            <Optim>4</Optim>
+            <oTime>1</oTime>
+            <SplitLS>0</SplitLS>
+            <OneElfS>0</OneElfS>
+            <Strict>0</Strict>
+            <EnumInt>0</EnumInt>
+            <PlainCh>0</PlainCh>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <wLevel>2</wLevel>
+            <uThumb>0</uThumb>
+            <uSurpInc>0</uSurpInc>
+            <uC99>0</uC99>
+            <useXO>0</useXO>
+            <v6Lang>0</v6Lang>
+            <v6LangP>0</v6LangP>
+            <VariousControls>
+              <MiscControls>--c99 -USTM32F303xC</MiscControls>
+              <Define>__heap_base__=Image$$$$RW_IRAM1$$$$ZI$$$$Limit __heap_end__=Image$$$$RW_IRAM2$$$$Base</Define>
+              <Undefine></Undefine>
+              <IncludePath>..\;..\..\..\..\os\common\ports\ARMCMx\devices\STM32F3xx;..\..\..\..\os\ext\CMSIS\include;..\..\..\..\os\ext\CMSIS\ST;..\..\..\..\os\rt\ports\ARMCMx;..\..\..\..\os\rt\ports\ARMCMx\compilers\RVCT;..\..\..\..\os\rt\include;..\..\..\..\os\hal\osal\rt;..\..\..\..\os\hal\include;..\..\..\..\os\hal\boards\ST_STM32F3_DISCOVERY;..\..\..\..\os\hal\ports\common\ARMCMx;..\..\..\..\os\hal\ports\STM32\STM32F3xx;..\..\..\..\os\hal\ports\STM32\LLD;..\..\..\..\os\hal\ports\STM32\LLD\ADCv3;..\..\..\..\os\hal\ports\STM32\LLD\CANv1;..\..\..\..\os\hal\ports\STM32\LLD\DACv1;..\..\..\..\os\hal\ports\STM32\LLD\DMAv1;..\..\..\..\os\hal\ports\STM32\LLD\EXTIv1;..\..\..\..\os\hal\ports\STM32\LLD\GPIOv2;..\..\..\..\os\hal\ports\STM32\LLD\I2Cv2;..\..\..\..\os\hal\ports\STM32\LLD\RTCv2;..\..\..\..\os\hal\ports\STM32\LLD\SPIv2;..\..\..\..\os\hal\ports\STM32\LLD\TIMv1;..\..\..\..\os\hal\ports\STM32\LLD\USARTv2;..\..\..\..\os\hal\ports\STM32\LLD\USBv1;..\..\..\..\os\hal\ports\STM32\LLD\xWDGv1;..\..\..\..\test\rt</IncludePath>
+            </VariousControls>
+          </Cads>
+          <Aads>
+            <interw>1</interw>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <thumb>0</thumb>
+            <SplitLS>0</SplitLS>
+            <SwStkChk>0</SwStkChk>
+            <NoWarn>0</NoWarn>
+            <uSurpInc>0</uSurpInc>
+            <useXO>0</useXO>
+            <VariousControls>
+              <MiscControls>--cpreproc</MiscControls>
+              <Define></Define>
+              <Undefine></Undefine>
+              <IncludePath>..\;..\..\..\..\os\common\ports\ARMCMx\devices\STM32F3xx;..\..\..\..\os\rt\ports\ARMCMx</IncludePath>
+            </VariousControls>
+          </Aads>
+          <LDads>
+            <umfTarg>1</umfTarg>
+            <Ropi>0</Ropi>
+            <Rwpi>0</Rwpi>
+            <noStLib>0</noStLib>
+            <RepFail>1</RepFail>
+            <useFile>0</useFile>
+            <TextAddressRange>0x08000000</TextAddressRange>
+            <DataAddressRange>0x20000000</DataAddressRange>
+            <pXoBase></pXoBase>
+            <ScatterFile></ScatterFile>
+            <IncludeLibs></IncludeLibs>
+            <IncludeLibsPath></IncludeLibsPath>
+            <Misc></Misc>
+            <LinkerInputFile></LinkerInputFile>
+            <DisabledWarnings></DisabledWarnings>
+          </LDads>
+        </TargetArmAds>
+      </TargetOption>
+      <Groups>
+        <Group>
+          <GroupName>startup</GroupName>
+          <Files>
+            <File>
+              <FileName>cmparams.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\common\ports\ARMCMx\devices\STM32F3xx\cmparams.h</FilePath>
+            </File>
+            <File>
+              <FileName>cstartup.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\os\common\ports\ARMCMx\compilers\RVCT\cstartup.s</FilePath>
+            </File>
+            <File>
+              <FileName>vectors.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\os\common\ports\ARMCMx\compilers\RVCT\vectors.s</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>cmsis</GroupName>
+          <Files>
+            <File>
+              <FileName>core_cmInstr.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\ext\CMSIS\include\core_cmInstr.h</FilePath>
+            </File>
+            <File>
+              <FileName>core_cm4.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\ext\CMSIS\include\core_cm4.h</FilePath>
+            </File>
+            <File>
+              <FileName>core_cm4_simd.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\ext\CMSIS\include\core_cm4_simd.h</FilePath>
+            </File>
+            <File>
+              <FileName>core_cmFunc.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\ext\CMSIS\include\core_cmFunc.h</FilePath>
+            </File>
+            <File>
+              <FileName>system_stm32f3xx.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\ext\CMSIS\ST\system_stm32f3xx.h</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>kernel port</GroupName>
+          <Files>
+            <File>
+              <FileName>chcore_v7m.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\ports\ARMCMx\chcore_v7m.h</FilePath>
+            </File>
+            <File>
+              <FileName>chcore.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\ports\ARMCMx\chcore.c</FilePath>
+            </File>
+            <File>
+              <FileName>chcore.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\ports\ARMCMx\chcore.h</FilePath>
+            </File>
+            <File>
+              <FileName>chcore_timer.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\ports\ARMCMx\chcore_timer.h</FilePath>
+            </File>
+            <File>
+              <FileName>chcore_v7m.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\ports\ARMCMx\chcore_v7m.c</FilePath>
+            </File>
+            <File>
+              <FileName>chtypes.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\ports\ARMCMx\compilers\RVCT\chtypes.h</FilePath>
+            </File>
+            <File>
+              <FileName>chcoreasm_v7m.s</FileName>
+              <FileType>2</FileType>
+              <FilePath>..\..\..\..\os\rt\ports\ARMCMx\compilers\RVCT\chcoreasm_v7m.s</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>kernel</GroupName>
+          <Files>
+            <File>
+              <FileName>ch.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\ch.h</FilePath>
+            </File>
+            <File>
+              <FileName>chbsem.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chbsem.h</FilePath>
+            </File>
+            <File>
+              <FileName>chcond.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chcond.h</FilePath>
+            </File>
+            <File>
+              <FileName>chdebug.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chdebug.h</FilePath>
+            </File>
+            <File>
+              <FileName>chdynamic.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chdynamic.h</FilePath>
+            </File>
+            <File>
+              <FileName>chevents.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chevents.h</FilePath>
+            </File>
+            <File>
+              <FileName>chheap.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chheap.h</FilePath>
+            </File>
+            <File>
+              <FileName>chmboxes.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chmboxes.h</FilePath>
+            </File>
+            <File>
+              <FileName>chmemcore.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chmemcore.h</FilePath>
+            </File>
+            <File>
+              <FileName>chmempools.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chmempools.h</FilePath>
+            </File>
+            <File>
+              <FileName>chmsg.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chmsg.h</FilePath>
+            </File>
+            <File>
+              <FileName>chmtx.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chmtx.h</FilePath>
+            </File>
+            <File>
+              <FileName>chqueues.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chqueues.h</FilePath>
+            </File>
+            <File>
+              <FileName>chregistry.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chregistry.h</FilePath>
+            </File>
+            <File>
+              <FileName>chschd.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chschd.h</FilePath>
+            </File>
+            <File>
+              <FileName>chsem.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chsem.h</FilePath>
+            </File>
+            <File>
+              <FileName>chstats.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chstats.h</FilePath>
+            </File>
+            <File>
+              <FileName>chstreams.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chstreams.h</FilePath>
+            </File>
+            <File>
+              <FileName>chsys.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chsys.h</FilePath>
+            </File>
+            <File>
+              <FileName>chthreads.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chthreads.h</FilePath>
+            </File>
+            <File>
+              <FileName>chtm.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chtm.h</FilePath>
+            </File>
+            <File>
+              <FileName>chvt.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\rt\include\chvt.h</FilePath>
+            </File>
+            <File>
+              <FileName>chcond.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\src\chcond.c</FilePath>
+            </File>
+            <File>
+              <FileName>chdebug.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\src\chdebug.c</FilePath>
+            </File>
+            <File>
+              <FileName>chdynamic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\src\chdynamic.c</FilePath>
+            </File>
+            <File>
+              <FileName>chevents.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\src\chevents.c</FilePath>
+            </File>
+            <File>
+              <FileName>chheap.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\src\chheap.c</FilePath>
+            </File>
+            <File>
+              <FileName>chmboxes.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\src\chmboxes.c</FilePath>
+            </File>
+            <File>
+              <FileName>chmemcore.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\src\chmemcore.c</FilePath>
+            </File>
+            <File>
+              <FileName>chmempools.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\src\chmempools.c</FilePath>
+            </File>
+            <File>
+              <FileName>chmsg.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\src\chmsg.c</FilePath>
+            </File>
+            <File>
+              <FileName>chmtx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\src\chmtx.c</FilePath>
+            </File>
+            <File>
+              <FileName>chqueues.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\src\chqueues.c</FilePath>
+            </File>
+            <File>
+              <FileName>chregistry.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\src\chregistry.c</FilePath>
+            </File>
+            <File>
+              <FileName>chschd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\src\chschd.c</FilePath>
+            </File>
+            <File>
+              <FileName>chsem.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\src\chsem.c</FilePath>
+            </File>
+            <File>
+              <FileName>chstats.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\src\chstats.c</FilePath>
+            </File>
+            <File>
+              <FileName>chsys.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\src\chsys.c</FilePath>
+            </File>
+            <File>
+              <FileName>chthreads.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\src\chthreads.c</FilePath>
+            </File>
+            <File>
+              <FileName>chtm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\src\chtm.c</FilePath>
+            </File>
+            <File>
+              <FileName>chvt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\rt\src\chvt.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>osal</GroupName>
+          <Files>
+            <File>
+              <FileName>osal.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\osal\rt\osal.c</FilePath>
+            </File>
+            <File>
+              <FileName>osal.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\osal\rt\osal.h</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>hal port</GroupName>
+          <Files>
+            <File>
+              <FileName>ext_lld_isr.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\STM32F3xx\ext_lld_isr.c</FilePath>
+            </File>
+            <File>
+              <FileName>ext_lld_isr.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\STM32F3xx\ext_lld_isr.h</FilePath>
+            </File>
+            <File>
+              <FileName>hal_lld.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\STM32F3xx\hal_lld.c</FilePath>
+            </File>
+            <File>
+              <FileName>hal_lld.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\STM32F3xx\hal_lld.h</FilePath>
+            </File>
+            <File>
+              <FileName>stm32_isr.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\STM32F3xx\stm32_isr.h</FilePath>
+            </File>
+            <File>
+              <FileName>stm32_rcc.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\STM32F3xx\stm32_rcc.h</FilePath>
+            </File>
+            <File>
+              <FileName>stm32_registry.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\STM32F3xx\stm32_registry.h</FilePath>
+            </File>
+            <File>
+              <FileName>pal_lld.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\GPIOv2\pal_lld.c</FilePath>
+            </File>
+            <File>
+              <FileName>pal_lld.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\GPIOv2\pal_lld.h</FilePath>
+            </File>
+            <File>
+              <FileName>i2c_lld.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\I2Cv2\i2c_lld.c</FilePath>
+            </File>
+            <File>
+              <FileName>i2c_lld.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\I2Cv2\i2c_lld.h</FilePath>
+            </File>
+            <File>
+              <FileName>rtc_lld.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\RTCv2\rtc_lld.c</FilePath>
+            </File>
+            <File>
+              <FileName>rtc_lld.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\RTCv2\rtc_lld.h</FilePath>
+            </File>
+            <File>
+              <FileName>spi_lld.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\SPIv2\spi_lld.c</FilePath>
+            </File>
+            <File>
+              <FileName>spi_lld.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\SPIv2\spi_lld.h</FilePath>
+            </File>
+            <File>
+              <FileName>gpt_lld.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\TIMv1\gpt_lld.c</FilePath>
+            </File>
+            <File>
+              <FileName>gpt_lld.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\TIMv1\gpt_lld.h</FilePath>
+            </File>
+            <File>
+              <FileName>icu_lld.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\TIMv1\icu_lld.c</FilePath>
+            </File>
+            <File>
+              <FileName>icu_lld.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\TIMv1\icu_lld.h</FilePath>
+            </File>
+            <File>
+              <FileName>pwm_lld.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\TIMv1\pwm_lld.c</FilePath>
+            </File>
+            <File>
+              <FileName>pwm_lld.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\TIMv1\pwm_lld.h</FilePath>
+            </File>
+            <File>
+              <FileName>st_lld.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\TIMv1\st_lld.c</FilePath>
+            </File>
+            <File>
+              <FileName>st_lld.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\TIMv1\st_lld.h</FilePath>
+            </File>
+            <File>
+              <FileName>stm32_tim.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\TIMv1\stm32_tim.h</FilePath>
+            </File>
+            <File>
+              <FileName>serial_lld.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\USARTv2\serial_lld.c</FilePath>
+            </File>
+            <File>
+              <FileName>serial_lld.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\USARTv2\serial_lld.h</FilePath>
+            </File>
+            <File>
+              <FileName>uart_lld.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\USARTv2\uart_lld.c</FilePath>
+            </File>
+            <File>
+              <FileName>uart_lld.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\USARTv2\uart_lld.h</FilePath>
+            </File>
+            <File>
+              <FileName>stm32_usb.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\USBv1\stm32_usb.h</FilePath>
+            </File>
+            <File>
+              <FileName>usb_lld.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\USBv1\usb_lld.c</FilePath>
+            </File>
+            <File>
+              <FileName>usb_lld.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\USBv1\usb_lld.h</FilePath>
+            </File>
+            <File>
+              <FileName>nvic.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\common\ARMCMx\nvic.c</FilePath>
+            </File>
+            <File>
+              <FileName>nvic.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\common\ARMCMx\nvic.h</FilePath>
+            </File>
+            <File>
+              <FileName>can_lld.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\CANv1\can_lld.c</FilePath>
+            </File>
+            <File>
+              <FileName>can_lld.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\CANv1\can_lld.h</FilePath>
+            </File>
+            <File>
+              <FileName>ext_lld.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\EXTIv1\ext_lld.c</FilePath>
+            </File>
+            <File>
+              <FileName>ext_lld.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\EXTIv1\ext_lld.h</FilePath>
+            </File>
+            <File>
+              <FileName>stm32_dma.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\DMAv1\stm32_dma.c</FilePath>
+            </File>
+            <File>
+              <FileName>stm32_dma.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\DMAv1\stm32_dma.h</FilePath>
+            </File>
+            <File>
+              <FileName>adc_lld.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\ADCv3\adc_lld.c</FilePath>
+            </File>
+            <File>
+              <FileName>adc_lld.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\ports\STM32\LLD\ADCv3\adc_lld.h</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>hal</GroupName>
+          <Files>
+            <File>
+              <FileName>adc.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\adc.h</FilePath>
+            </File>
+            <File>
+              <FileName>can.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\can.h</FilePath>
+            </File>
+            <File>
+              <FileName>dac.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\dac.h</FilePath>
+            </File>
+            <File>
+              <FileName>ext.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\ext.h</FilePath>
+            </File>
+            <File>
+              <FileName>gpt.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\gpt.h</FilePath>
+            </File>
+            <File>
+              <FileName>hal.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\hal.h</FilePath>
+            </File>
+            <File>
+              <FileName>hal_buffers.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\hal_buffers.h</FilePath>
+            </File>
+            <File>
+              <FileName>hal_channels.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\hal_channels.h</FilePath>
+            </File>
+            <File>
+              <FileName>hal_files.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\hal_files.h</FilePath>
+            </File>
+            <File>
+              <FileName>hal_ioblock.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\hal_ioblock.h</FilePath>
+            </File>
+            <File>
+              <FileName>hal_mmcsd.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\hal_mmcsd.h</FilePath>
+            </File>
+            <File>
+              <FileName>hal_queues.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\hal_queues.h</FilePath>
+            </File>
+            <File>
+              <FileName>hal_streams.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\hal_streams.h</FilePath>
+            </File>
+            <File>
+              <FileName>i2c.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\i2c.h</FilePath>
+            </File>
+            <File>
+              <FileName>i2s.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\i2s.h</FilePath>
+            </File>
+            <File>
+              <FileName>icu.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\icu.h</FilePath>
+            </File>
+            <File>
+              <FileName>mac.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\mac.h</FilePath>
+            </File>
+            <File>
+              <FileName>mii.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\mii.h</FilePath>
+            </File>
+            <File>
+              <FileName>mmc_spi.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\mmc_spi.h</FilePath>
+            </File>
+            <File>
+              <FileName>pal.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\pal.h</FilePath>
+            </File>
+            <File>
+              <FileName>pwm.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\pwm.h</FilePath>
+            </File>
+            <File>
+              <FileName>rtc.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\rtc.h</FilePath>
+            </File>
+            <File>
+              <FileName>sdc.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\sdc.h</FilePath>
+            </File>
+            <File>
+              <FileName>serial.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\serial.h</FilePath>
+            </File>
+            <File>
+              <FileName>serial_usb.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\serial_usb.h</FilePath>
+            </File>
+            <File>
+              <FileName>spi.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\spi.h</FilePath>
+            </File>
+            <File>
+              <FileName>st.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\st.h</FilePath>
+            </File>
+            <File>
+              <FileName>uart.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\uart.h</FilePath>
+            </File>
+            <File>
+              <FileName>usb.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\usb.h</FilePath>
+            </File>
+            <File>
+              <FileName>wdg.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\include\wdg.h</FilePath>
+            </File>
+            <File>
+              <FileName>adc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\adc.c</FilePath>
+            </File>
+            <File>
+              <FileName>can.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\can.c</FilePath>
+            </File>
+            <File>
+              <FileName>dac.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\dac.c</FilePath>
+            </File>
+            <File>
+              <FileName>ext.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\ext.c</FilePath>
+            </File>
+            <File>
+              <FileName>gpt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\gpt.c</FilePath>
+            </File>
+            <File>
+              <FileName>hal.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\hal.c</FilePath>
+            </File>
+            <File>
+              <FileName>hal_buffers.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\hal_buffers.c</FilePath>
+            </File>
+            <File>
+              <FileName>hal_mmcsd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\hal_mmcsd.c</FilePath>
+            </File>
+            <File>
+              <FileName>hal_queues.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\hal_queues.c</FilePath>
+            </File>
+            <File>
+              <FileName>i2c.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\i2c.c</FilePath>
+            </File>
+            <File>
+              <FileName>i2s.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\i2s.c</FilePath>
+            </File>
+            <File>
+              <FileName>icu.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\icu.c</FilePath>
+            </File>
+            <File>
+              <FileName>mac.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\mac.c</FilePath>
+            </File>
+            <File>
+              <FileName>mmc_spi.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\mmc_spi.c</FilePath>
+            </File>
+            <File>
+              <FileName>pal.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\pal.c</FilePath>
+            </File>
+            <File>
+              <FileName>pwm.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\pwm.c</FilePath>
+            </File>
+            <File>
+              <FileName>rtc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\rtc.c</FilePath>
+            </File>
+            <File>
+              <FileName>sdc.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\sdc.c</FilePath>
+            </File>
+            <File>
+              <FileName>serial.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\serial.c</FilePath>
+            </File>
+            <File>
+              <FileName>serial_usb.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\serial_usb.c</FilePath>
+            </File>
+            <File>
+              <FileName>spi.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\spi.c</FilePath>
+            </File>
+            <File>
+              <FileName>st.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\st.c</FilePath>
+            </File>
+            <File>
+              <FileName>uart.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\uart.c</FilePath>
+            </File>
+            <File>
+              <FileName>usb.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\usb.c</FilePath>
+            </File>
+            <File>
+              <FileName>wdg.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\src\wdg.c</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>board</GroupName>
+          <Files>
+            <File>
+              <FileName>board.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\os\hal\boards\ST_STM32F3_DISCOVERY\board.c</FilePath>
+            </File>
+            <File>
+              <FileName>board.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\os\hal\boards\ST_STM32F3_DISCOVERY\board.h</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>test</GroupName>
+          <Files>
+            <File>
+              <FileName>testthd.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\test\rt\testthd.h</FilePath>
+            </File>
+            <File>
+              <FileName>test.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\test\rt\test.c</FilePath>
+            </File>
+            <File>
+              <FileName>test.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\test\rt\test.h</FilePath>
+            </File>
+            <File>
+              <FileName>testbmk.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\test\rt\testbmk.c</FilePath>
+            </File>
+            <File>
+              <FileName>testbmk.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\test\rt\testbmk.h</FilePath>
+            </File>
+            <File>
+              <FileName>testdyn.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\test\rt\testdyn.c</FilePath>
+            </File>
+            <File>
+              <FileName>testdyn.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\test\rt\testdyn.h</FilePath>
+            </File>
+            <File>
+              <FileName>testevt.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\test\rt\testevt.c</FilePath>
+            </File>
+            <File>
+              <FileName>testevt.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\test\rt\testevt.h</FilePath>
+            </File>
+            <File>
+              <FileName>testheap.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\test\rt\testheap.c</FilePath>
+            </File>
+            <File>
+              <FileName>testheap.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\test\rt\testheap.h</FilePath>
+            </File>
+            <File>
+              <FileName>testmbox.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\test\rt\testmbox.c</FilePath>
+            </File>
+            <File>
+              <FileName>testmbox.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\test\rt\testmbox.h</FilePath>
+            </File>
+            <File>
+              <FileName>testmsg.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\test\rt\testmsg.c</FilePath>
+            </File>
+            <File>
+              <FileName>testmsg.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\test\rt\testmsg.h</FilePath>
+            </File>
+            <File>
+              <FileName>testmtx.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\test\rt\testmtx.c</FilePath>
+            </File>
+            <File>
+              <FileName>testmtx.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\test\rt\testmtx.h</FilePath>
+            </File>
+            <File>
+              <FileName>testpools.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\test\rt\testpools.c</FilePath>
+            </File>
+            <File>
+              <FileName>testpools.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\test\rt\testpools.h</FilePath>
+            </File>
+            <File>
+              <FileName>testqueues.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\test\rt\testqueues.c</FilePath>
+            </File>
+            <File>
+              <FileName>testqueues.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\test\rt\testqueues.h</FilePath>
+            </File>
+            <File>
+              <FileName>testsem.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\test\rt\testsem.c</FilePath>
+            </File>
+            <File>
+              <FileName>testsem.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\test\rt\testsem.h</FilePath>
+            </File>
+            <File>
+              <FileName>testthd.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\test\rt\testthd.c</FilePath>
+            </File>
+            <File>
+              <FileName>testsys.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\..\..\..\test\rt\testsys.c</FilePath>
+            </File>
+            <File>
+              <FileName>testsys.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\..\..\..\test\rt\testsys.h</FilePath>
+            </File>
+          </Files>
+        </Group>
+        <Group>
+          <GroupName>demo</GroupName>
+          <Files>
+            <File>
+              <FileName>main.c</FileName>
+              <FileType>1</FileType>
+              <FilePath>..\main.c</FilePath>
+            </File>
+            <File>
+              <FileName>mcuconf.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\mcuconf.h</FilePath>
+            </File>
+            <File>
+              <FileName>chconf.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\chconf.h</FilePath>
+            </File>
+            <File>
+              <FileName>halconf.h</FileName>
+              <FileType>5</FileType>
+              <FilePath>..\halconf.h</FilePath>
+            </File>
+          </Files>
+        </Group>
+      </Groups>
+    </Target>
+  </Targets>
+
+</Project>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/main.c
new file mode 100644
index 0000000..d5ac581
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/main.c
@@ -0,0 +1,118 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * Blinker thread #1.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+
+  chRegSetThreadName("blinker");
+  while (true) {
+    palSetPad(GPIOE, GPIOE_LED3_RED);
+    chThdSleepMilliseconds(125);
+    palClearPad(GPIOE, GPIOE_LED3_RED);
+    chThdSleepMilliseconds(125);
+    palSetPad(GPIOE, GPIOE_LED7_GREEN);
+    chThdSleepMilliseconds(125);
+    palClearPad(GPIOE, GPIOE_LED7_GREEN);
+    chThdSleepMilliseconds(125);
+    palSetPad(GPIOE, GPIOE_LED10_RED);
+    chThdSleepMilliseconds(125);
+    palClearPad(GPIOE, GPIOE_LED10_RED);
+    chThdSleepMilliseconds(125);
+    palSetPad(GPIOE, GPIOE_LED6_GREEN);
+    chThdSleepMilliseconds(125);
+    palClearPad(GPIOE, GPIOE_LED6_GREEN);
+    chThdSleepMilliseconds(125);
+  }
+}
+
+/*
+ * Blinker thread #2.
+ */
+static THD_WORKING_AREA(waThread2, 128);
+static THD_FUNCTION(Thread2, arg) {
+
+  (void)arg;
+
+  chRegSetThreadName("blinker");
+  while (true) {
+    chThdSleepMilliseconds(125);
+    palSetPad(GPIOE, GPIOE_LED5_ORANGE);
+    chThdSleepMilliseconds(125);
+    palClearPad(GPIOE, GPIOE_LED5_ORANGE);
+    chThdSleepMilliseconds(125);
+    palSetPad(GPIOE, GPIOE_LED9_BLUE);
+    chThdSleepMilliseconds(125);
+    palClearPad(GPIOE, GPIOE_LED9_BLUE);
+    chThdSleepMilliseconds(125);
+    palSetPad(GPIOE, GPIOE_LED8_ORANGE);
+    chThdSleepMilliseconds(125);
+    palClearPad(GPIOE, GPIOE_LED8_ORANGE);
+    chThdSleepMilliseconds(125);
+    palSetPad(GPIOE, GPIOE_LED4_BLUE);
+    chThdSleepMilliseconds(125);
+    palClearPad(GPIOE, GPIOE_LED4_BLUE);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   * PA9(TX) and PA10(RX) are routed to USART1.
+   */
+  sdStart(&SD1, NULL);
+  palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7));
+  palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7));
+
+  /*
+   * Creates the example threads.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO+1, Thread1, NULL);
+  chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO+1, Thread2, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state, when the button is
+   * pressed the test procedure is launched.
+   */
+  while (true) {
+    if (palReadPad(GPIOA, GPIOA_BUTTON))
+      TestThread(&SD1);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/mcuconf.h
new file mode 100644
index 0000000..017aff5
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/mcuconf.h
@@ -0,0 +1,253 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F3xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F3xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADC12PRES                     STM32_ADC12PRES_DIV1
+#define STM32_ADC34PRES                     STM32_ADC34PRES_DIV1
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_USART2SW                      STM32_USART2SW_PCLK
+#define STM32_USART3SW                      STM32_USART3SW_PCLK
+#define STM32_UART4SW                       STM32_UART4SW_PCLK
+#define STM32_UART5SW                       STM32_UART5SW_PCLK
+#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
+#define STM32_I2C2SW                        STM32_I2C2SW_SYSCLK
+#define STM32_TIM1SW                        STM32_TIM1SW_PCLK2
+#define STM32_TIM8SW                        STM32_TIM8SW_PCLK2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE                 FALSE
+#define STM32_ADC_COMPACT_SAMPLES           FALSE
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_USE_ADC4                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 5)
+#define STM32_ADC_ADC4_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_ADC4_DMA_PRIORITY         2
+#define STM32_ADC_ADC12_IRQ_PRIORITY        5
+#define STM32_ADC_ADC3_IRQ_PRIORITY         5
+#define STM32_ADC_ADC4_IRQ_PRIORITY         5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC12_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC34_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              TRUE
+#define STM32_DAC_USE_DAC1_CH2              TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI30_32_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI33_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         10
+#define STM32_I2C_I2C2_IRQ_PRIORITY         10
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             TRUE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  FALSE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/readme.txt
new file mode 100644
index 0000000..0bad189
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303-DISCOVERY/readme.txt
@@ -0,0 +1,25 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 STM32F303.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST STM32F3-Discovery board.
+
+** The Demo **
+
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO. just modify the TRGT line in the makefile in order to use
+different GCC toolchains.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/.cproject
new file mode 100644
index 0000000..bb9a7d8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/.cproject
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.603687198">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.603687198" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.603687198" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.603687198." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963.1446538340" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1490952991" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1134067298" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1927705259" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1013764026" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1367371861" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1824820452" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1584496456" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1781547795" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F303K8-NUCLEO32.null.1004513353" name="RT-STM32F303K8-NUCLEO32"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.603687198">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32F303K8-NUCLEO32"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/.project
new file mode 100644
index 0000000..9856f59
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F303K8-NUCLEO32</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_NUCLEO32_F303K8</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/Makefile
new file mode 100644
index 0000000..31330fc
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f3xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F3xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_NUCLEO32_F303K8/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F303x8.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/chconf.h
new file mode 100644
index 0000000..7d99062
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/debug/RT-STM32F303K8-NUCLEO32 (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/debug/RT-STM32F303K8-NUCLEO32 (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..182365e
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/debug/RT-STM32F303K8-NUCLEO32 (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F303K8-NUCLEO32\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F303K8-NUCLEO32"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F303K8-NUCLEO32"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/main.c
new file mode 100644
index 0000000..15b0bcb
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/main.c
@@ -0,0 +1,72 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * Red LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  palSetLineMode(LINE_LED_GREEN, PAL_MODE_OUTPUT_PUSHPULL);
+  while (true) {
+    palClearLine(LINE_LED_GREEN);
+    chThdSleepMilliseconds(500);
+    palSetLine(LINE_LED_GREEN);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 2 using the driver default configuration.
+   */
+  sdStart(&SD2, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (!palReadLine(LINE_ARD_D3))
+      TestThread(&SD2);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/mcuconf.h
new file mode 100644
index 0000000..e41fddb
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/mcuconf.h
@@ -0,0 +1,256 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F3xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F3xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADC12PRES                     STM32_ADC12PRES_DIV1
+#define STM32_ADC34PRES                     STM32_ADC34PRES_DIV1
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_USART2SW                      STM32_USART2SW_PCLK
+#define STM32_USART3SW                      STM32_USART3SW_PCLK
+#define STM32_UART4SW                       STM32_UART4SW_PCLK
+#define STM32_UART5SW                       STM32_UART5SW_PCLK
+#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
+#define STM32_I2C2SW                        STM32_I2C2SW_SYSCLK
+#define STM32_TIM1SW                        STM32_TIM1SW_PCLK2
+#define STM32_TIM8SW                        STM32_TIM8SW_PCLK2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE                 FALSE
+#define STM32_ADC_COMPACT_SAMPLES           FALSE
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_USE_ADC4                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 5)
+#define STM32_ADC_ADC4_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_ADC4_DMA_PRIORITY         2
+#define STM32_ADC_ADC12_IRQ_PRIORITY        5
+#define STM32_ADC_ADC3_IRQ_PRIORITY         5
+#define STM32_ADC_ADC4_IRQ_PRIORITY         5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC4_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC12_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+#define STM32_ADC_ADC34_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              TRUE
+#define STM32_DAC_USE_DAC1_CH2              TRUE
+#define STM32_DAC_USE_DAC2_CH1              TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC2_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC2_CH1_DMA_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI30_32_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI33_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         10
+#define STM32_I2C_I2C2_IRQ_PRIORITY         10
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  FALSE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/readme.txt
new file mode 100644
index 0000000..e10cad4
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F303K8-NUCLEO32/readme.txt
@@ -0,0 +1,27 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 STM32F303.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST_NUCLEO32_F303K8 board.
+
+** The Demo **
+
+The demo flashes the board LED using a thread, by pressing the button located
+on the board the test procedure is activated with output on the serial port
+SD2 (USART2, mapped on USB virtual COM port).
+
+** Build Procedure **
+
+The demo has been tested by using the ChibiStudio GCC-based toolchain
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/.cproject
new file mode 100644
index 0000000..9847b78
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/.cproject
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.603687198">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.603687198" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.603687198" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.603687198." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963.1446538340" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1490952991" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1134067298" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1927705259" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1013764026" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1367371861" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1824820452" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1584496456" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1781547795" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F334R8-NUCLEO.null.1004513353" name="RT-STM32F334R8-NUCLEO"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.603687198">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32F334R8-NUCLEO"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/.project
new file mode 100644
index 0000000..17e3b64
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F334R8-NUCLEO</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_NUCLEO_F401RE</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/Makefile
new file mode 100644
index 0000000..228d143
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f3xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F3xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_NUCLEO_F334R8/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F334x8.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/chconf.h
new file mode 100644
index 0000000..7d99062
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/debug/RT-STM32F334R8-NUCLEO (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/debug/RT-STM32F334R8-NUCLEO (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..2eeb1e6
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/debug/RT-STM32F334R8-NUCLEO (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F334R8-NUCLEO\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F334R8-NUCLEO"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F334R8-NUCLEO"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/main.c
new file mode 100644
index 0000000..bd50f19
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/main.c
@@ -0,0 +1,71 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * Red LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palClearPad(GPIOA, GPIOA_LED_GREEN);
+    chThdSleepMilliseconds(500);
+    palSetPad(GPIOA, GPIOA_LED_GREEN);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 2 using the driver default configuration.
+   */
+  sdStart(&SD2, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (!palReadPad(GPIOC, GPIOC_BUTTON))
+      TestThread(&SD2);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/mcuconf.h
new file mode 100644
index 0000000..06db92b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/mcuconf.h
@@ -0,0 +1,205 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F3xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F3xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  12
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADC12PRES                     STM32_ADC12PRES_DIV1
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_USART2SW                      STM32_USART2SW_PCLK
+#define STM32_USART3SW                      STM32_USART3SW_PCLK
+#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
+#define STM32_TIM1SW                        STM32_TIM1SW_PCLK2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE                 FALSE
+#define STM32_ADC_COMPACT_SAMPLES           FALSE
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC12_IRQ_PRIORITY        5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC12_CLOCK_MODE          ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              TRUE
+#define STM32_DAC_USE_DAC1_CH2              TRUE
+#define STM32_DAC_USE_DAC2_CH1              TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC2_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC2_CH1_DMA_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_22_29_IRQ_PRIORITY 6
+#define STM32_EXT_EXTI30_32_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI33_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         10
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/readme.txt
new file mode 100644
index 0000000..4705d10
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F334R8-NUCLEO/readme.txt
@@ -0,0 +1,28 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 STM32F334.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST_NUCLEO_F334R8 board.
+
+** The Demo **
+
+The demo flashes the board LED using a thread, by pressing the button located
+on the board the test procedure is activated with output on the serial port
+SD2 (USART2, mapped on USB virtual COM port).
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/.cproject
new file mode 100644
index 0000000..6fa6a0b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/.cproject
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.893948763">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.893948763" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.893948763" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.893948763." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1037062377" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1037062377.1634199257" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1157388447" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1118114194" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1096147758" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.56921643" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1950972902" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.757229687" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.2083630404" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.74001990" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="ARMCM4-STM32F373-STM32373C_EVAL.null.292152410" name="ARMCM4-STM32F373-STM32373C_EVAL"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.893948763">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32F373-STM32373C_EVAL"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/.project
new file mode 100644
index 0000000..f5000d6
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F373-STM32373C_EVAL</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32373C_EVAL</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/Makefile
new file mode 100644
index 0000000..48ce621
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f3xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F37x/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32373C_EVAL/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F373xC.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/chconf.h
new file mode 100644
index 0000000..7d99062
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/debug/RT-STM32F373-DISCOVERY (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/debug/RT-STM32F373-DISCOVERY (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..9d4ec22
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/debug/RT-STM32F373-DISCOVERY (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F373-STM32373C_EVAL\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F373-STM32373C_EVAL"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F373-STM32373C_EVAL"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/main.c
new file mode 100644
index 0000000..256c6d7
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/main.c
@@ -0,0 +1,82 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * This is a periodic thread that does absolutely nothing except flashing LEDs.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+
+  chRegSetThreadName("blinker");
+  while (true) {
+    palClearPad(GPIOC, GPIOC_LED1);
+    chThdSleepMilliseconds(250);
+    palSetPad(GPIOC, GPIOC_LED1);
+    palClearPad(GPIOC, GPIOC_LED2);
+    chThdSleepMilliseconds(250);
+    palSetPad(GPIOC, GPIOC_LED2);
+    palClearPad(GPIOC, GPIOC_LED3);
+    chThdSleepMilliseconds(250);
+    palSetPad(GPIOC, GPIOC_LED3);
+    palClearPad(GPIOC, GPIOC_LED4);
+    chThdSleepMilliseconds(250);
+    palSetPad(GPIOC, GPIOC_LED4);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 2 using the default configuration, pins
+   * are pre-configured in board.h.
+   */
+  sdStart(&SD2, NULL);
+
+  /*
+   * Creates the example thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state, when the button is
+   * pressed the test procedure is launched.
+   */
+  while (true) {
+    if (palReadPad(GPIOA, GPIOA_WKUP_BUTTON))
+      TestThread(&SD2);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/mcuconf.h
new file mode 100644
index 0000000..25c08c5
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/mcuconf.h
@@ -0,0 +1,240 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F30x drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F37x_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PREDIV_VALUE                  1
+#define STM32_PLLMUL_VALUE                  9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_ADCPRE                        STM32_ADCPRE_DIV4
+#define STM32_SDPRE                         STM32_SDPRE_DIV12
+#define STM32_USART1SW                      STM32_USART1SW_PCLK
+#define STM32_USART2SW                      STM32_USART2SW_PCLK
+#define STM32_USART3SW                      STM32_USART3SW_PCLK
+#define STM32_I2C1SW                        STM32_I2C1SW_SYSCLK
+#define STM32_I2C2SW                        STM32_I2C2SW_SYSCLK
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_USB_CLOCK_REQUIRED            TRUE
+#define STM32_USBPRE                        STM32_USBPRE_DIV1P5
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_SDADC1                FALSE
+#define STM32_ADC_USE_SDADC2                FALSE
+#define STM32_ADC_USE_SDADC3                FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_SDADC1_DMA_PRIORITY       2
+#define STM32_ADC_SDADC2_DMA_PRIORITY       2
+#define STM32_ADC_SDADC3_DMA_PRIORITY       2
+#define STM32_ADC_ADC1_IRQ_PRIORITY         5
+#define STM32_ADC_SDADC1_IRQ_PRIORITY       5
+#define STM32_ADC_SDADC2_IRQ_PRIORITY       5
+#define STM32_ADC_SDADC3_IRQ_PRIORITY       5
+#define STM32_ADC_SDADC1_DMA_IRQ_PRIORITY   5
+#define STM32_ADC_SDADC2_DMA_IRQ_PRIORITY   5
+#define STM32_ADC_SDADC3_DMA_IRQ_PRIORITY   5
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  TRUE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              TRUE
+#define STM32_DAC_USE_DAC1_CH2              TRUE
+#define STM32_DAC_USE_DAC2_CH1              TRUE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC2_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC2_CH1_DMA_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_23_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI30_32_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI33_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM12                 FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM12_IRQ_PRIORITY        7
+#define STM32_GPT_TIM14_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         10
+#define STM32_I2C_I2C2_IRQ_PRIORITY         10
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  FALSE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/readme.txt
new file mode 100644
index 0000000..b46265e
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F373-STM32373C_EVAL/readme.txt
@@ -0,0 +1,25 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 STM32F373.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an STMicroelectronics STM32373C-EVAL board.
+
+** The Demo **
+
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO. just modify the TRGT line in the makefile in order to use
+different GCC toolchains.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/.cproject
new file mode 100644
index 0000000..1f69bd6
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/.cproject
@@ -0,0 +1,50 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.114656749">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.114656749." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F401C-DISCOVERY.null.1703860681" name="RT-STM32F401C-DISCOVERY"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.114656749">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/.project
new file mode 100644
index 0000000..e4b2a70
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/.project
@@ -0,0 +1,95 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F401C-DISCOVERY</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value>-j1</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>true</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32F401C_DISCOVERY</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/Makefile
new file mode 100644
index 0000000..15bb779
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = hard
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F401C_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F401xC.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/chconf.h
new file mode 100644
index 0000000..7d99062
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/debug/RT-STM32F401C-DISCOVERY (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/debug/RT-STM32F401C-DISCOVERY (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..a3f6d7b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/debug/RT-STM32F401C-DISCOVERY (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F401C-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F401C-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F401C-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/debug/RT-STM32F401C-DISCOVERY (OpenOCD, Just Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/debug/RT-STM32F401C-DISCOVERY (OpenOCD, Just Run).launch
new file mode 100644
index 0000000..30de8b5
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/debug/RT-STM32F401C-DISCOVERY (OpenOCD, Just Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F401C-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="0"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList&gt;&lt;content id=&quot;r3-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;vt_delta-null-chVTDoSetI-(format)&quot; val=&quot;4&quot;/&gt;&lt;/contentList&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F401C-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F401C-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/main.c
new file mode 100644
index 0000000..e7b5bd3
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/main.c
@@ -0,0 +1,75 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * This is a periodic thread that does absolutely nothing except flashing
+ * a LED.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palSetPad(GPIOD, GPIOD_LED3);       /* Orange.  */
+    chThdSleepMilliseconds(500);
+    palClearPad(GPIOD, GPIOD_LED3);     /* Orange.  */
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 2 using the driver default configuration.
+   * PA2(TX) and PA3(RX) are routed to USART2.
+   */
+  sdStart(&SD2, NULL);
+  palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7));
+  palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7));
+
+  /*
+   * Creates the example thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (palReadPad(GPIOA, GPIOA_BUTTON))
+      TestThread(&SD2);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/mcuconf.h
new file mode 100644
index 0000000..8778adb
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/mcuconf.h
@@ -0,0 +1,251 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F4xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_CLOCK48_REQUIRED              TRUE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLM_VALUE                    8       
+#define STM32_PLLN_VALUE                    336     
+#define STM32_PLLP_VALUE                    4       
+#define STM32_PLLQ_VALUE                    7       
+#define STM32_HPRE                          STM32_HPRE_DIV1  
+#define STM32_PPRE1                         STM32_PPRE1_DIV2  
+#define STM32_PPRE2                         STM32_PPRE2_DIV1 
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_RTCPRE_VALUE                  8
+#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5
+#define STM32_I2SSRC                        STM32_I2SSRC_CKIN
+#define STM32_PLLI2SN_VALUE                 192
+#define STM32_PLLI2SR_VALUE                 5
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE                 FALSE
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4   
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI22_IRQ_PRIORITY       6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM9                  FALSE
+#define STM32_GPT_USE_TIM11                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM9_IRQ_PRIORITY         7
+#define STM32_GPT_TIM11_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_USE_I2C3                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C3_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_I2C3_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_USE_SPI3                  FALSE
+#define STM32_I2S_SPI2_IRQ_PRIORITY         10
+#define STM32_I2S_SPI3_IRQ_PRIORITY         10
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI3_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2S_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM9                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM9_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM9                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM9_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART6             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART6_PRIORITY        12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART6               FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART6_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART6_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1                  FALSE
+#define STM32_USB_OTG1_IRQ_PRIORITY         14
+#define STM32_USB_OTG1_RX_FIFO_SIZE         512
+#define STM32_USB_OTG_THREAD_PRIO           LOWPRIO
+#define STM32_USB_OTG_THREAD_STACK_SIZE     128
+#define STM32_USB_OTGFIFO_FILL_BASEPRI      0
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/readme.txt
new file mode 100644
index 0000000..d0c105b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401C-DISCOVERY/readme.txt
@@ -0,0 +1,25 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 STM32F401.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST STM32F401C-Discovery board.
+
+** The Demo **
+
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO. just modify the TRGT line in the makefile in order to use
+different GCC toolchains.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/.cproject
new file mode 100644
index 0000000..ad4a2d0
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/.cproject
@@ -0,0 +1,54 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.603687198">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.603687198" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.603687198" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.603687198." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963.1446538340" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1490952991" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1134067298" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1927705259" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1013764026" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1367371861" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1824820452" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1584496456" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1781547795" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F401RE-NUCLEO.null.1004513353" name="RT-STM32F401RE-NUCLEO"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.603687198">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32F401RE-NUCLEO"/>
+		</configuration>
+	</storageModule>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/.project
new file mode 100644
index 0000000..e765fe6
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F401RE-NUCLEO</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_NUCLEO_F401RE</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/Makefile
new file mode 100644
index 0000000..aa4e0fe
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_NUCLEO_F401RE/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F401xE.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/chconf.h
new file mode 100644
index 0000000..7d99062
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/debug/RT-STM32F401RE-NUCLEO (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/debug/RT-STM32F401RE-NUCLEO (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..99fb4a5
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/debug/RT-STM32F401RE-NUCLEO (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F401RE-NUCLEO\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F401RE-NUCLEO"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F401RE-NUCLEO"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/main.c
new file mode 100644
index 0000000..4feec8e
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/main.c
@@ -0,0 +1,71 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palClearPad(GPIOA, GPIOA_LED_GREEN);
+    chThdSleepMilliseconds(500);
+    palSetPad(GPIOA, GPIOA_LED_GREEN);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 2 using the driver default configuration.
+   */
+  sdStart(&SD2, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (!palReadPad(GPIOC, GPIOC_BUTTON))
+      TestThread(&SD2);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/mcuconf.h
new file mode 100644
index 0000000..e8ad590
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/mcuconf.h
@@ -0,0 +1,251 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F4xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_CLOCK48_REQUIRED              TRUE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI
+#define STM32_PLLM_VALUE                    16
+#define STM32_PLLN_VALUE                    336     
+#define STM32_PLLP_VALUE                    4       
+#define STM32_PLLQ_VALUE                    7       
+#define STM32_HPRE                          STM32_HPRE_DIV1  
+#define STM32_PPRE1                         STM32_PPRE1_DIV2  
+#define STM32_PPRE2                         STM32_PPRE2_DIV1 
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_RTCPRE_VALUE                  8
+#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5
+#define STM32_I2SSRC                        STM32_I2SSRC_CKIN
+#define STM32_PLLI2SN_VALUE                 192
+#define STM32_PLLI2SR_VALUE                 5
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE                 FALSE
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4   
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI22_IRQ_PRIORITY       15
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM9                  FALSE
+#define STM32_GPT_USE_TIM11                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM9_IRQ_PRIORITY         7
+#define STM32_GPT_TIM11_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_USE_I2C3                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C3_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_I2C3_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_USE_SPI3                  FALSE
+#define STM32_I2S_SPI2_IRQ_PRIORITY         10
+#define STM32_I2S_SPI3_IRQ_PRIORITY         10
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI3_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2S_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM9                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM9_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM9                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM9_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART6             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART6_PRIORITY        12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  TRUE
+#define STM32_SPI_USE_SPI2                  TRUE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART6               FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART6_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART6_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1                  FALSE
+#define STM32_USB_OTG1_IRQ_PRIORITY         14
+#define STM32_USB_OTG1_RX_FIFO_SIZE         512
+#define STM32_USB_OTG_THREAD_PRIO           LOWPRIO
+#define STM32_USB_OTG_THREAD_STACK_SIZE     128
+#define STM32_USB_OTGFIFO_FILL_BASEPRI      0
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/readme.txt
new file mode 100644
index 0000000..03777ef
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F401RE-NUCLEO/readme.txt
@@ -0,0 +1,28 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 STM32F401.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST_NUCLEO_F401RE board.
+
+** The Demo **
+
+The demo flashes the board LED using a thread, by pressing the button located
+on the board the test procedure is activated with output on the serial port
+SD2 (USART2, mapped on USB virtual COM port).
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/.cproject
new file mode 100644
index 0000000..d6f18bf
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/.cproject
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.114656749">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.114656749." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F407-DISCOVERY-G++.null.1703860681" name="RT-STM32F407-DISCOVERY-G++"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.114656749">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/.project
new file mode 100644
index 0000000..c42e566
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/.project
@@ -0,0 +1,95 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F407-DISCOVERY-G++</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value>-j1</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>true</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/Makefile
new file mode 100644
index 0000000..3f80bcf
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/Makefile
@@ -0,0 +1,217 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = no
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+include $(CHIBIOS)/os/various/cpp_wrappers/chcpp.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC)
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC = $(CHCPPSRC) \
+         main.cpp
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHCPPINC) $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/chconf.h
new file mode 100644
index 0000000..7d99062
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/debug/RT-STM32F407-DISCOVERY-G++ (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/debug/RT-STM32F407-DISCOVERY-G++ (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..3d650c7
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/debug/RT-STM32F407-DISCOVERY-G++ (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F407-DISCOVERY-G++\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F407-DISCOVERY-G++"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F407-DISCOVERY-G++"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/halconf.h
new file mode 100644
index 0000000..737fb4a
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 TRUE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 TRUE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/main.cpp b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/main.cpp
new file mode 100644
index 0000000..e7ad071
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/main.cpp
@@ -0,0 +1,192 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.hpp"
+#include "hal.h"
+#include "test.h"
+
+using namespace chibios_rt;
+
+/*
+ * LED blink sequences.
+ * NOTE: Sequences must always be terminated by a GOTO instruction.
+ * NOTE: The sequencer language could be easily improved but this is outside
+ *       the scope of this demo.
+ */
+#define SLEEP           0
+#define GOTO            1
+#define STOP            2
+#define BITCLEAR        3
+#define BITSET          4
+
+typedef struct {
+  uint8_t       action;
+  uint32_t      value;
+} seqop_t;
+
+// Flashing sequence for LED3.
+static const seqop_t LED3_sequence[] =
+{
+  {BITSET, PAL_PORT_BIT(GPIOD_LED3)},
+  {SLEEP,    800},
+  {BITCLEAR,   PAL_PORT_BIT(GPIOD_LED3)},
+  {SLEEP,    200},
+  {GOTO,     0}
+};
+
+// Flashing sequence for LED4.
+static const seqop_t LED4_sequence[] =
+{
+  {BITSET, PAL_PORT_BIT(GPIOD_LED4)},
+  {SLEEP,    600},
+  {BITCLEAR,   PAL_PORT_BIT(GPIOD_LED4)},
+  {SLEEP,    400},
+  {GOTO,     0}
+};
+
+// Flashing sequence for LED5.
+static const seqop_t LED5_sequence[] =
+{
+  {BITSET, PAL_PORT_BIT(GPIOD_LED5)},
+  {SLEEP,    400},
+  {BITCLEAR,   PAL_PORT_BIT(GPIOD_LED5)},
+  {SLEEP,    600},
+  {GOTO,     0}
+};
+
+// Flashing sequence for LED6.
+static const seqop_t LED6_sequence[] =
+{
+  {BITSET, PAL_PORT_BIT(GPIOD_LED6)},
+  {SLEEP,    200},
+  {BITCLEAR,   PAL_PORT_BIT(GPIOD_LED6)},
+  {SLEEP,    800},
+  {GOTO,     0}
+};
+
+/*
+ * Sequencer thread class. It can drive LEDs or other output pins.
+ * Any sequencer is just an instance of this class, all the details are
+ * totally encapsulated and hidden to the application level.
+ */
+class SequencerThread : public BaseStaticThread<128> {
+private:
+  const seqop_t *base, *curr;                   // Thread local variables.
+
+protected:
+  virtual void main(void) {
+
+    setName("sequencer");
+
+    while (true) {
+      switch(curr->action) {
+      case SLEEP:
+        sleep(MS2ST(curr->value));
+        break;
+      case GOTO:
+        curr = &base[curr->value];
+        continue;
+      case STOP:
+        return;
+      case BITCLEAR:
+        palClearPort(GPIOD, curr->value);
+        break;
+      case BITSET:
+        palSetPort(GPIOD, curr->value);
+        break;
+      }
+      curr++;
+    }
+  }
+
+public:
+  SequencerThread(const seqop_t *sequence) : BaseStaticThread<128>() {
+
+    base = curr = sequence;
+  }
+};
+
+/*
+ * Tester thread class. This thread executes the test suite.
+ */
+class TesterThread : public BaseStaticThread<256> {
+
+protected:
+  virtual void main(void) {
+
+    setName("tester");
+
+    TestThread(&SD2);
+    exit(test_global_fail);
+  }
+
+public:
+  TesterThread(void) : BaseStaticThread<256>() {
+  }
+};
+
+/* Static threads instances.*/
+static TesterThread tester;
+static SequencerThread blinker1(LED3_sequence);
+static SequencerThread blinker2(LED4_sequence);
+static SequencerThread blinker3(LED5_sequence);
+static SequencerThread blinker4(LED6_sequence);
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  System::init();
+
+  /*
+   * Activates the serial driver 2 using the driver default configuration.
+   * PA2(TX) and PA3(RX) are routed to USART2.
+   */
+  sdStart(&SD2, NULL);
+  palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7));
+  palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7));
+
+  /*
+   * Starts several instances of the SequencerThread class, each one operating
+   * on a different LED.
+   */
+  blinker1.start(NORMALPRIO + 10);
+  blinker2.start(NORMALPRIO + 10);
+  blinker3.start(NORMALPRIO + 10);
+  blinker4.start(NORMALPRIO + 10);
+
+  /*
+   * Serves timer events.
+   */
+  while (true) {
+    if (palReadPad(GPIOA, GPIOA_BUTTON)) {
+      tester.start(NORMALPRIO);
+      tester.wait();
+    };
+    BaseThread::sleep(MS2ST(500));
+  }
+
+  return 0;
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/mcuconf.h
new file mode 100644
index 0000000..07f0ad4
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/mcuconf.h
@@ -0,0 +1,342 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F4xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_CLOCK48_REQUIRED              TRUE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLM_VALUE                    8
+#define STM32_PLLN_VALUE                    336
+#define STM32_PLLP_VALUE                    2
+#define STM32_PLLQ_VALUE                    7
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV4
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_RTCPRE_VALUE                  8
+#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5
+#define STM32_I2SSRC                        STM32_I2SSRC_CKIN
+#define STM32_PLLI2SN_VALUE                 192
+#define STM32_PLLI2SR_VALUE                 5
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE                 FALSE
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_USE_CAN2                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+#define STM32_CAN_CAN2_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              FALSE
+#define STM32_DAC_USE_DAC1_CH2              FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH1_DMA_STREAM       STM32_DMA_STREAM_ID(1, 5)
+#define STM32_DAC_DAC1_CH2_DMA_STREAM       STM32_DMA_STREAM_ID(1, 6)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI22_IRQ_PRIORITY       15
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_USE_TIM9                  FALSE
+#define STM32_GPT_USE_TIM11                 FALSE
+#define STM32_GPT_USE_TIM12                 FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+#define STM32_GPT_TIM9_IRQ_PRIORITY         7
+#define STM32_GPT_TIM11_IRQ_PRIORITY        7
+#define STM32_GPT_TIM12_IRQ_PRIORITY        7
+#define STM32_GPT_TIM14_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_USE_I2C3                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C3_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_I2C3_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_USE_SPI3                  FALSE
+#define STM32_I2S_SPI2_IRQ_PRIORITY         10
+#define STM32_I2S_SPI3_IRQ_PRIORITY         10
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI3_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2S_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_USE_TIM9                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+#define STM32_ICU_TIM9_IRQ_PRIORITY         7
+
+/*
+ * MAC driver system settings.
+ */
+#define STM32_MAC_TRANSMIT_BUFFERS          2
+#define STM32_MAC_RECEIVE_BUFFERS           4
+#define STM32_MAC_BUFFERS_SIZE              1522
+#define STM32_MAC_PHY_TIMEOUT               100
+#define STM32_MAC_ETH1_CHANGE_PHY_STATE     TRUE
+#define STM32_MAC_ETH1_IRQ_PRIORITY         13
+#define STM32_MAC_IP_CHECKSUM_OFFLOAD       0
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  TRUE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_USE_TIM9                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+#define STM32_PWM_TIM9_IRQ_PRIORITY         7
+
+/*
+ * SDC driver system settings.
+ */
+#define STM32_SDC_SDIO_DMA_PRIORITY         3
+#define STM32_SDC_SDIO_IRQ_PRIORITY         9
+#define STM32_SDC_WRITE_TIMEOUT_MS          250
+#define STM32_SDC_READ_TIMEOUT_MS           25
+#define STM32_SDC_CLOCK_ACTIVATION_DELAY    10
+#define STM32_SDC_SDIO_UNALIGNED_SUPPORT    TRUE
+#define STM32_SDC_SDIO_DMA_STREAM           STM32_DMA_STREAM_ID(2, 3)
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USE_USART6             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+#define STM32_SERIAL_USART6_PRIORITY        12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  TRUE
+#define STM32_SPI_USE_SPI2                  TRUE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USE_UART4                FALSE
+#define STM32_UART_USE_UART5                FALSE
+#define STM32_UART_USE_USART6               FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART3_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 1)
+#define STM32_UART_USART3_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_UART4_IRQ_PRIORITY       12
+#define STM32_UART_UART5_IRQ_PRIORITY       12
+#define STM32_UART_USART6_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_UART4_DMA_PRIORITY       0
+#define STM32_UART_UART5_DMA_PRIORITY       0
+#define STM32_UART_USART6_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1                  FALSE
+#define STM32_USB_USE_OTG2                  FALSE
+#define STM32_USB_OTG1_IRQ_PRIORITY         14
+#define STM32_USB_OTG2_IRQ_PRIORITY         14
+#define STM32_USB_OTG1_RX_FIFO_SIZE         512
+#define STM32_USB_OTG2_RX_FIFO_SIZE         1024
+#define STM32_USB_OTG_THREAD_PRIO           LOWPRIO
+#define STM32_USB_OTG_THREAD_STACK_SIZE     128
+#define STM32_USB_OTGFIFO_FILL_BASEPRI      0
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/readme.txt
new file mode 100644
index 0000000..940e073
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-G++/readme.txt
@@ -0,0 +1,30 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 STM32F407.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST STM32F4-Discovery board.
+
+** The Demo **
+
+The demo shows how to use PWM and SPI drivers using synchronous APIs. The PWM
+driver the four board LEDs with the data read from the LIS320DL accelerometer.
+The data is also transmitted on the SPI2 port.
+A simple command shell is activated on virtual serial port SD2 via USB-CDC
+driver (use micro-USB plug on STM32F4-Discovery board).
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO. just modify the TRGT line in the makefile in order to use
+different GCC toolchains.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/.cproject
new file mode 100644
index 0000000..0ccbe54
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/.cproject
@@ -0,0 +1,50 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.114656749">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.114656749." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F407-DISCOVERY-MEMS.null.1703860681" name="RT-STM32F407-DISCOVERY-MEMS"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.114656749">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/.project
new file mode 100644
index 0000000..a2c101b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/.project
@@ -0,0 +1,95 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F407-DISCOVERY-MEMS</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value>-j1</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>true</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/Makefile
new file mode 100644
index 0000000..c2344d7
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/Makefile
@@ -0,0 +1,221 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       $(CHIBIOS)/os/various/devices_lib/accel/lis302dl.c \
+       $(CHIBIOS)/os/various/shell.c \
+       $(CHIBIOS)/os/hal/lib/streams/memstreams.c \
+       $(CHIBIOS)/os/hal/lib/streams/chprintf.c \
+       usbcfg.c main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various/devices_lib/accel \
+         $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/chconf.h
new file mode 100644
index 0000000..7d99062
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/debug/RT-STM32F407-DISCOVERY-MEMS (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/debug/RT-STM32F407-DISCOVERY-MEMS (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..ff20064
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/debug/RT-STM32F407-DISCOVERY-MEMS (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F407-DISCOVERY-MEMS\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F407-DISCOVERY-MEMS"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F407-DISCOVERY-MEMS"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/halconf.h
new file mode 100644
index 0000000..111a38f
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 TRUE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          TRUE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 TRUE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/main.c
new file mode 100644
index 0000000..1c02f91
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/main.c
@@ -0,0 +1,323 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+#include "chprintf.h"
+#include "shell.h"
+#include "lis302dl.h"
+
+#include "usbcfg.h"
+
+/*===========================================================================*/
+/* Command line related.                                                     */
+/*===========================================================================*/
+
+#define SHELL_WA_SIZE   THD_WORKING_AREA_SIZE(2048)
+#define TEST_WA_SIZE    THD_WORKING_AREA_SIZE(256)
+
+static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
+  size_t n, size;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: mem\r\n");
+    return;
+  }
+  n = chHeapStatus(NULL, &size);
+  chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX());
+  chprintf(chp, "heap fragments   : %u\r\n", n);
+  chprintf(chp, "heap free total  : %u bytes\r\n", size);
+}
+
+static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
+  static const char *states[] = {CH_STATE_NAMES};
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: threads\r\n");
+    return;
+  }
+  chprintf(chp, "    addr    stack prio refs     state\r\n");
+  tp = chRegFirstThread();
+  do {
+    chprintf(chp, "%08lx %08lx %4lu %4lu %9s\r\n",
+             (uint32_t)tp, (uint32_t)tp->p_ctx.r13,
+             (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
+             states[tp->p_state]);
+    tp = chRegNextThread(tp);
+  } while (tp != NULL);
+}
+
+static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: test\r\n");
+    return;
+  }
+  tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(),
+                           TestThread, chp);
+  if (tp == NULL) {
+    chprintf(chp, "out of memory\r\n");
+    return;
+  }
+  chThdWait(tp);
+}
+
+static const ShellCommand commands[] = {
+  {"mem", cmd_mem},
+  {"threads", cmd_threads},
+  {"test", cmd_test},
+  {NULL, NULL}
+};
+
+static const ShellConfig shell_cfg1 = {
+  (BaseSequentialStream *)&SDU1,
+  commands
+};
+
+/*===========================================================================*/
+/* Accelerometer related.                                                    */
+/*===========================================================================*/
+
+/*
+ * PWM configuration structure.
+ * Cyclic callback enabled, channels 1 and 4 enabled without callbacks,
+ * the active state is a logic one.
+ */
+static const PWMConfig pwmcfg = {
+  100000,                                   /* 100kHz PWM clock frequency.  */
+  128,                                      /* PWM period is 128 cycles.    */
+  NULL,
+  {
+   {PWM_OUTPUT_ACTIVE_HIGH, NULL},
+   {PWM_OUTPUT_ACTIVE_HIGH, NULL},
+   {PWM_OUTPUT_ACTIVE_HIGH, NULL},
+   {PWM_OUTPUT_ACTIVE_HIGH, NULL}
+  },
+  /* HW dependent part.*/
+  0,
+  0
+};
+
+/*
+ * SPI1 configuration structure.
+ * Speed 5.25MHz, CPHA=1, CPOL=1, 8bits frames, MSb transmitted first.
+ * The slave select line is the pin GPIOE_CS_SPI on the port GPIOE.
+ */
+static const SPIConfig spi1cfg = {
+  NULL,
+  /* HW dependent part.*/
+  GPIOE,
+  GPIOE_CS_SPI,
+  SPI_CR1_BR_0 | SPI_CR1_BR_1 | SPI_CR1_CPOL | SPI_CR1_CPHA
+};
+
+/*
+ * SPI2 configuration structure.
+ * Speed 21MHz, CPHA=0, CPOL=0, 8bits frames, MSb transmitted first.
+ * The slave select line is the pin 12 on the port GPIOA.
+ */
+static const SPIConfig spi2cfg = {
+  NULL,
+  /* HW dependent part.*/
+  GPIOB,
+  12,
+  0
+};
+
+/*
+ * This is a periodic thread that reads accelerometer and outputs
+ * result to SPI2 and PWM.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+  static int8_t xbuf[4], ybuf[4];   /* Last accelerometer data.*/
+  systime_t time;                   /* Next deadline.*/
+
+  (void)arg;
+  chRegSetThreadName("reader");
+
+  /* LIS302DL initialization.*/
+  lis302dlWriteRegister(&SPID1, LIS302DL_CTRL_REG1, 0x43);
+  lis302dlWriteRegister(&SPID1, LIS302DL_CTRL_REG2, 0x00);
+  lis302dlWriteRegister(&SPID1, LIS302DL_CTRL_REG3, 0x00);
+
+  /* Reader thread loop.*/
+  time = chVTGetSystemTime();
+  while (true) {
+    int32_t x, y;
+    unsigned i;
+
+    /* Keeping an history of the latest four accelerometer readings.*/
+    for (i = 3; i > 0; i--) {
+      xbuf[i] = xbuf[i - 1];
+      ybuf[i] = ybuf[i - 1];
+    }
+
+    /* Reading MEMS accelerometer X and Y registers.*/
+    xbuf[0] = (int8_t)lis302dlReadRegister(&SPID1, LIS302DL_OUTX);
+    ybuf[0] = (int8_t)lis302dlReadRegister(&SPID1, LIS302DL_OUTY);
+
+    /* Transmitting accelerometer the data over SPI2.*/
+    spiSelect(&SPID2);
+    spiSend(&SPID2, 4, xbuf);
+    spiSend(&SPID2, 4, ybuf);
+    spiUnselect(&SPID2);
+
+    /* Calculating average of the latest four accelerometer readings.*/
+    x = ((int32_t)xbuf[0] + (int32_t)xbuf[1] +
+         (int32_t)xbuf[2] + (int32_t)xbuf[3]) / 4;
+    y = ((int32_t)ybuf[0] + (int32_t)ybuf[1] +
+         (int32_t)ybuf[2] + (int32_t)ybuf[3]) / 4;
+
+    /* Reprogramming the four PWM channels using the accelerometer data.*/
+    if (y < 0) {
+      pwmEnableChannel(&PWMD4, 0, (pwmcnt_t)-y);
+      pwmEnableChannel(&PWMD4, 2, (pwmcnt_t)0);
+    }
+    else {
+      pwmEnableChannel(&PWMD4, 2, (pwmcnt_t)y);
+      pwmEnableChannel(&PWMD4, 0, (pwmcnt_t)0);
+    }
+    if (x < 0) {
+      pwmEnableChannel(&PWMD4, 1, (pwmcnt_t)-x);
+      pwmEnableChannel(&PWMD4, 3, (pwmcnt_t)0);
+    }
+    else {
+      pwmEnableChannel(&PWMD4, 3, (pwmcnt_t)x);
+      pwmEnableChannel(&PWMD4, 1, (pwmcnt_t)0);
+    }
+
+    /* Waiting until the next 250 milliseconds time interval.*/
+    chThdSleepUntil(time += MS2ST(100));
+  }
+}
+
+/*===========================================================================*/
+/* Initialization and main thread.                                           */
+/*===========================================================================*/
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+  thread_t *shelltp = NULL;
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Shell manager initialization.
+   */
+  shellInit();
+
+  /*
+   * Initializes a serial-over-USB CDC driver.
+   */
+  sduObjectInit(&SDU1);
+  sduStart(&SDU1, &serusbcfg);
+
+  /*
+   * Activates the USB driver and then the USB bus pull-up on D+.
+   * Note, a delay is inserted in order to not have to disconnect the cable
+   * after a reset.
+   */
+  usbDisconnectBus(serusbcfg.usbp);
+  chThdSleepMilliseconds(1000);
+  usbStart(serusbcfg.usbp, &usbcfg);
+  usbConnectBus(serusbcfg.usbp);
+
+  /*
+   * Activates the serial driver 2 using the driver default configuration.
+   * PA2(TX) and PA3(RX) are routed to USART2.
+   */
+  sdStart(&SD2, NULL);
+  palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7));
+  palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7));
+
+  /*
+   * Initializes the SPI driver 1 in order to access the MEMS. The signals
+   * are already initialized in the board file.
+   */
+  spiStart(&SPID1, &spi1cfg);
+
+  /*
+   * Initializes the SPI driver 2. The SPI2 signals are routed as follow:
+   * PB12 - NSS.
+   * PB13 - SCK.
+   * PB14 - MISO.
+   * PB15 - MOSI.
+   */
+  spiStart(&SPID2, &spi2cfg);
+  palSetPad(GPIOB, 12);
+  palSetPadMode(GPIOB, 12, PAL_MODE_OUTPUT_PUSHPULL |
+                           PAL_STM32_OSPEED_HIGHEST);           /* NSS.     */
+  palSetPadMode(GPIOB, 13, PAL_MODE_ALTERNATE(5) |
+                           PAL_STM32_OSPEED_HIGHEST);           /* SCK.     */
+  palSetPadMode(GPIOB, 14, PAL_MODE_ALTERNATE(5));              /* MISO.    */
+  palSetPadMode(GPIOB, 15, PAL_MODE_ALTERNATE(5) |
+                           PAL_STM32_OSPEED_HIGHEST);           /* MOSI.    */
+
+  /*
+   * Initializes the PWM driver 4, routes the TIM4 outputs to the board LEDs.
+   */
+  pwmStart(&PWMD4, &pwmcfg);
+  palSetPadMode(GPIOD, GPIOD_LED4, PAL_MODE_ALTERNATE(2));      /* Green.   */
+  palSetPadMode(GPIOD, GPIOD_LED3, PAL_MODE_ALTERNATE(2));      /* Orange.  */
+  palSetPadMode(GPIOD, GPIOD_LED5, PAL_MODE_ALTERNATE(2));      /* Red.     */
+  palSetPadMode(GPIOD, GPIOD_LED6, PAL_MODE_ALTERNATE(2));      /* Blue.    */
+
+  /*
+   * Creates the example thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1),
+                    NORMALPRIO + 10, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it just performs
+   * a shell respawn upon its termination.
+   */
+  while (true) {
+    if (!shelltp) {
+      if (SDU1.config->usbp->state == USB_ACTIVE) {
+        /* Spawns a new shell.*/
+        shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
+      }
+    }
+    else {
+      /* If the previous shell exited.*/
+      if (chThdTerminatedX(shelltp)) {
+        /* Recovers memory of the previous shell.*/
+        chThdRelease(shelltp);
+        shelltp = NULL;
+      }
+    }
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/mcuconf.h
new file mode 100644
index 0000000..3f21441
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/mcuconf.h
@@ -0,0 +1,342 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F4xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_CLOCK48_REQUIRED              TRUE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLM_VALUE                    8
+#define STM32_PLLN_VALUE                    336
+#define STM32_PLLP_VALUE                    2
+#define STM32_PLLQ_VALUE                    7
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV4
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_RTCPRE_VALUE                  8
+#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5
+#define STM32_I2SSRC                        STM32_I2SSRC_CKIN
+#define STM32_PLLI2SN_VALUE                 192
+#define STM32_PLLI2SR_VALUE                 5
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE                 FALSE
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_USE_CAN2                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+#define STM32_CAN_CAN2_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              FALSE
+#define STM32_DAC_USE_DAC1_CH2              FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH1_DMA_STREAM       STM32_DMA_STREAM_ID(1, 5)
+#define STM32_DAC_DAC1_CH2_DMA_STREAM       STM32_DMA_STREAM_ID(1, 6)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI22_IRQ_PRIORITY       15
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_USE_TIM9                  FALSE
+#define STM32_GPT_USE_TIM11                 FALSE
+#define STM32_GPT_USE_TIM12                 FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+#define STM32_GPT_TIM9_IRQ_PRIORITY         7
+#define STM32_GPT_TIM11_IRQ_PRIORITY        7
+#define STM32_GPT_TIM12_IRQ_PRIORITY        7
+#define STM32_GPT_TIM14_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_USE_I2C3                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C3_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_I2C3_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_USE_SPI3                  FALSE
+#define STM32_I2S_SPI2_IRQ_PRIORITY         10
+#define STM32_I2S_SPI3_IRQ_PRIORITY         10
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI3_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2S_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_USE_TIM9                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+#define STM32_ICU_TIM9_IRQ_PRIORITY         7
+
+/*
+ * MAC driver system settings.
+ */
+#define STM32_MAC_TRANSMIT_BUFFERS          2
+#define STM32_MAC_RECEIVE_BUFFERS           4
+#define STM32_MAC_BUFFERS_SIZE              1522
+#define STM32_MAC_PHY_TIMEOUT               100
+#define STM32_MAC_ETH1_CHANGE_PHY_STATE     TRUE
+#define STM32_MAC_ETH1_IRQ_PRIORITY         13
+#define STM32_MAC_IP_CHECKSUM_OFFLOAD       0
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  TRUE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_USE_TIM9                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+#define STM32_PWM_TIM9_IRQ_PRIORITY         7
+
+/*
+ * SDC driver system settings.
+ */
+#define STM32_SDC_SDIO_DMA_PRIORITY         3
+#define STM32_SDC_SDIO_IRQ_PRIORITY         9
+#define STM32_SDC_WRITE_TIMEOUT_MS          250
+#define STM32_SDC_READ_TIMEOUT_MS           25
+#define STM32_SDC_CLOCK_ACTIVATION_DELAY    10
+#define STM32_SDC_SDIO_UNALIGNED_SUPPORT    TRUE
+#define STM32_SDC_SDIO_DMA_STREAM           STM32_DMA_STREAM_ID(2, 3)
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USE_USART6             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+#define STM32_SERIAL_USART6_PRIORITY        12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  TRUE
+#define STM32_SPI_USE_SPI2                  TRUE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USE_UART4                FALSE
+#define STM32_UART_USE_UART5                FALSE
+#define STM32_UART_USE_USART6               FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART3_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 1)
+#define STM32_UART_USART3_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_UART4_IRQ_PRIORITY       12
+#define STM32_UART_UART5_IRQ_PRIORITY       12
+#define STM32_UART_USART6_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_UART4_DMA_PRIORITY       0
+#define STM32_UART_UART5_DMA_PRIORITY       0
+#define STM32_UART_USART6_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1                  TRUE
+#define STM32_USB_USE_OTG2                  FALSE
+#define STM32_USB_OTG1_IRQ_PRIORITY         14
+#define STM32_USB_OTG2_IRQ_PRIORITY         14
+#define STM32_USB_OTG1_RX_FIFO_SIZE         512
+#define STM32_USB_OTG2_RX_FIFO_SIZE         1024
+#define STM32_USB_OTG_THREAD_PRIO           LOWPRIO
+#define STM32_USB_OTG_THREAD_STACK_SIZE     128
+#define STM32_USB_OTGFIFO_FILL_BASEPRI      0
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/readme.txt
new file mode 100644
index 0000000..940e073
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/readme.txt
@@ -0,0 +1,30 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 STM32F407.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST STM32F4-Discovery board.
+
+** The Demo **
+
+The demo shows how to use PWM and SPI drivers using synchronous APIs. The PWM
+driver the four board LEDs with the data read from the LIS320DL accelerometer.
+The data is also transmitted on the SPI2 port.
+A simple command shell is activated on virtual serial port SD2 via USB-CDC
+driver (use micro-USB plug on STM32F4-Discovery board).
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO. just modify the TRGT line in the makefile in order to use
+different GCC toolchains.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/usbcfg.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/usbcfg.c
new file mode 100644
index 0000000..80f0165
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/usbcfg.c
@@ -0,0 +1,336 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+/* Virtual serial port over USB.*/
+SerialUSBDriver SDU1;
+
+/*
+ * Endpoints to be used for USBD1.
+ */
+#define USBD1_DATA_REQUEST_EP           1
+#define USBD1_DATA_AVAILABLE_EP         1
+#define USBD1_INTERRUPT_REQUEST_EP      2
+
+/*
+ * USB Device Descriptor.
+ */
+static const uint8_t vcom_device_descriptor_data[18] = {
+  USB_DESC_DEVICE       (0x0110,        /* bcdUSB (1.1).                    */
+                         0x02,          /* bDeviceClass (CDC).              */
+                         0x00,          /* bDeviceSubClass.                 */
+                         0x00,          /* bDeviceProtocol.                 */
+                         0x40,          /* bMaxPacketSize.                  */
+                         0x0483,        /* idVendor (ST).                   */
+                         0x5740,        /* idProduct.                       */
+                         0x0200,        /* bcdDevice.                       */
+                         1,             /* iManufacturer.                   */
+                         2,             /* iProduct.                        */
+                         3,             /* iSerialNumber.                   */
+                         1)             /* bNumConfigurations.              */
+};
+
+/*
+ * Device Descriptor wrapper.
+ */
+static const USBDescriptor vcom_device_descriptor = {
+  sizeof vcom_device_descriptor_data,
+  vcom_device_descriptor_data
+};
+
+/* Configuration Descriptor tree for a CDC.*/
+static const uint8_t vcom_configuration_descriptor_data[67] = {
+  /* Configuration Descriptor.*/
+  USB_DESC_CONFIGURATION(67,            /* wTotalLength.                    */
+                         0x02,          /* bNumInterfaces.                  */
+                         0x01,          /* bConfigurationValue.             */
+                         0,             /* iConfiguration.                  */
+                         0xC0,          /* bmAttributes (self powered).     */
+                         50),           /* bMaxPower (100mA).               */
+  /* Interface Descriptor.*/
+  USB_DESC_INTERFACE    (0x00,          /* bInterfaceNumber.                */
+                         0x00,          /* bAlternateSetting.               */
+                         0x01,          /* bNumEndpoints.                   */
+                         0x02,          /* bInterfaceClass (Communications
+                                           Interface Class, CDC section
+                                           4.2).                            */
+                         0x02,          /* bInterfaceSubClass (Abstract
+                                         Control Model, CDC section 4.3).   */
+                         0x01,          /* bInterfaceProtocol (AT commands,
+                                           CDC section 4.4).                */
+                         0),            /* iInterface.                      */
+  /* Header Functional Descriptor (CDC section 5.2.3).*/
+  USB_DESC_BYTE         (5),            /* bLength.                         */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x00),         /* bDescriptorSubtype (Header
+                                           Functional Descriptor.           */
+  USB_DESC_BCD          (0x0110),       /* bcdCDC.                          */
+  /* Call Management Functional Descriptor. */
+  USB_DESC_BYTE         (5),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x01),         /* bDescriptorSubtype (Call Management
+                                           Functional Descriptor).          */
+  USB_DESC_BYTE         (0x00),         /* bmCapabilities (D0+D1).          */
+  USB_DESC_BYTE         (0x01),         /* bDataInterface.                  */
+  /* ACM Functional Descriptor.*/
+  USB_DESC_BYTE         (4),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x02),         /* bDescriptorSubtype (Abstract
+                                           Control Management Descriptor).  */
+  USB_DESC_BYTE         (0x02),         /* bmCapabilities.                  */
+  /* Union Functional Descriptor.*/
+  USB_DESC_BYTE         (5),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x06),         /* bDescriptorSubtype (Union
+                                           Functional Descriptor).          */
+  USB_DESC_BYTE         (0x00),         /* bMasterInterface (Communication
+                                           Class Interface).                */
+  USB_DESC_BYTE         (0x01),         /* bSlaveInterface0 (Data Class
+                                           Interface).                      */
+  /* Endpoint 2 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD1_INTERRUPT_REQUEST_EP|0x80,
+                         0x03,          /* bmAttributes (Interrupt).        */
+                         0x0008,        /* wMaxPacketSize.                  */
+                         0xFF),         /* bInterval.                       */
+  /* Interface Descriptor.*/
+  USB_DESC_INTERFACE    (0x01,          /* bInterfaceNumber.                */
+                         0x00,          /* bAlternateSetting.               */
+                         0x02,          /* bNumEndpoints.                   */
+                         0x0A,          /* bInterfaceClass (Data Class
+                                           Interface, CDC section 4.5).     */
+                         0x00,          /* bInterfaceSubClass (CDC section
+                                           4.6).                            */
+                         0x00,          /* bInterfaceProtocol (CDC section
+                                           4.7).                            */
+                         0x00),         /* iInterface.                      */
+  /* Endpoint 3 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD1_DATA_AVAILABLE_EP,       /* bEndpointAddress.*/
+                         0x02,          /* bmAttributes (Bulk).             */
+                         0x0040,        /* wMaxPacketSize.                  */
+                         0x00),         /* bInterval.                       */
+  /* Endpoint 1 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD1_DATA_REQUEST_EP|0x80,    /* bEndpointAddress.*/
+                         0x02,          /* bmAttributes (Bulk).             */
+                         0x0040,        /* wMaxPacketSize.                  */
+                         0x00)          /* bInterval.                       */
+};
+
+/*
+ * Configuration Descriptor wrapper.
+ */
+static const USBDescriptor vcom_configuration_descriptor = {
+  sizeof vcom_configuration_descriptor_data,
+  vcom_configuration_descriptor_data
+};
+
+/*
+ * U.S. English language identifier.
+ */
+static const uint8_t vcom_string0[] = {
+  USB_DESC_BYTE(4),                     /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  USB_DESC_WORD(0x0409)                 /* wLANGID (U.S. English).          */
+};
+
+/*
+ * Vendor string.
+ */
+static const uint8_t vcom_string1[] = {
+  USB_DESC_BYTE(38),                    /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0,
+  'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0,
+  'c', 0, 's', 0
+};
+
+/*
+ * Device Description string.
+ */
+static const uint8_t vcom_string2[] = {
+  USB_DESC_BYTE(56),                    /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0,
+  'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0,
+  'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0,
+  'o', 0, 'r', 0, 't', 0
+};
+
+/*
+ * Serial Number string.
+ */
+static const uint8_t vcom_string3[] = {
+  USB_DESC_BYTE(8),                     /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  '0' + CH_KERNEL_MAJOR, 0,
+  '0' + CH_KERNEL_MINOR, 0,
+  '0' + CH_KERNEL_PATCH, 0
+};
+
+/*
+ * Strings wrappers array.
+ */
+static const USBDescriptor vcom_strings[] = {
+  {sizeof vcom_string0, vcom_string0},
+  {sizeof vcom_string1, vcom_string1},
+  {sizeof vcom_string2, vcom_string2},
+  {sizeof vcom_string3, vcom_string3}
+};
+
+/*
+ * Handles the GET_DESCRIPTOR callback. All required descriptors must be
+ * handled here.
+ */
+static const USBDescriptor *get_descriptor(USBDriver *usbp,
+                                           uint8_t dtype,
+                                           uint8_t dindex,
+                                           uint16_t lang) {
+
+  (void)usbp;
+  (void)lang;
+  switch (dtype) {
+  case USB_DESCRIPTOR_DEVICE:
+    return &vcom_device_descriptor;
+  case USB_DESCRIPTOR_CONFIGURATION:
+    return &vcom_configuration_descriptor;
+  case USB_DESCRIPTOR_STRING:
+    if (dindex < 4)
+      return &vcom_strings[dindex];
+  }
+  return NULL;
+}
+
+/**
+ * @brief   IN EP1 state.
+ */
+static USBInEndpointState ep1instate;
+
+/**
+ * @brief   OUT EP1 state.
+ */
+static USBOutEndpointState ep1outstate;
+
+/**
+ * @brief   EP1 initialization structure (both IN and OUT).
+ */
+static const USBEndpointConfig ep1config = {
+  USB_EP_MODE_TYPE_BULK,
+  NULL,
+  sduDataTransmitted,
+  sduDataReceived,
+  0x0040,
+  0x0040,
+  &ep1instate,
+  &ep1outstate,
+  2,
+  NULL
+};
+
+/**
+ * @brief   IN EP2 state.
+ */
+static USBInEndpointState ep2instate;
+
+/**
+ * @brief   EP2 initialization structure (IN only).
+ */
+static const USBEndpointConfig ep2config = {
+  USB_EP_MODE_TYPE_INTR,
+  NULL,
+  sduInterruptTransmitted,
+  NULL,
+  0x0010,
+  0x0000,
+  &ep2instate,
+  NULL,
+  1,
+  NULL
+};
+
+/*
+ * Handles the USB driver global events.
+ */
+static void usb_event(USBDriver *usbp, usbevent_t event) {
+  extern SerialUSBDriver SDU1;
+
+  switch (event) {
+  case USB_EVENT_RESET:
+    return;
+  case USB_EVENT_ADDRESS:
+    return;
+  case USB_EVENT_CONFIGURED:
+    chSysLockFromISR();
+
+    /* Enables the endpoints specified into the configuration.
+       Note, this callback is invoked from an ISR so I-Class functions
+       must be used.*/
+    usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config);
+    usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config);
+
+    /* Resetting the state of the CDC subsystem.*/
+    sduConfigureHookI(&SDU1);
+
+    chSysUnlockFromISR();
+    return;
+  case USB_EVENT_UNCONFIGURED:
+    return;
+  case USB_EVENT_SUSPEND:
+    chSysLockFromISR();
+
+    /* Disconnection event on suspend.*/
+    sduDisconnectI(&SDU1);
+
+    chSysUnlockFromISR();
+    return;
+  case USB_EVENT_WAKEUP:
+    return;
+  case USB_EVENT_STALLED:
+    return;
+  }
+  return;
+}
+
+/*
+ * Handles the USB driver global events.
+ */
+static void sof_handler(USBDriver *usbp) {
+
+  (void)usbp;
+
+  osalSysLockFromISR();
+  sduSOFHookI(&SDU1);
+  osalSysUnlockFromISR();
+}
+
+/*
+ * USB driver configuration.
+ */
+const USBConfig usbcfg = {
+  usb_event,
+  get_descriptor,
+  sduRequestsHook,
+  sof_handler
+};
+
+/*
+ * Serial over USB driver configuration.
+ */
+const SerialUSBConfig serusbcfg = {
+  &USBD1,
+  USBD1_DATA_REQUEST_EP,
+  USBD1_DATA_AVAILABLE_EP,
+  USBD1_INTERRUPT_REQUEST_EP
+};
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/usbcfg.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/usbcfg.h
new file mode 100644
index 0000000..2da1c40
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY-MEMS/usbcfg.h
@@ -0,0 +1,26 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _USBCFG_H_
+#define _USBCFG_H_
+
+extern const USBConfig usbcfg;
+extern SerialUSBConfig serusbcfg;
+extern SerialUSBDriver SDU1;
+
+#endif  /* _USBCFG_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/.cproject
new file mode 100644
index 0000000..18b18da
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/.cproject
@@ -0,0 +1,50 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.114656749">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.114656749." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F407-DISCOVERY.null.1703860681" name="RT-STM32F407-DISCOVERY"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.114656749">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/.project
new file mode 100644
index 0000000..e24444f
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/.project
@@ -0,0 +1,95 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F407-DISCOVERY</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value>-j1</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>true</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32F4_DISCOVERY</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/Makefile
new file mode 100644
index 0000000..672d9ad
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/chconf.h
new file mode 100644
index 0000000..7d99062
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/debug/RT-STM32F407-DISCOVERY (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/debug/RT-STM32F407-DISCOVERY (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..630c1c8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/debug/RT-STM32F407-DISCOVERY (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F407-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F407-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F407-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/debug/RT-STM32F407-DISCOVERY (OpenOCD, Just Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/debug/RT-STM32F407-DISCOVERY (OpenOCD, Just Run).launch
new file mode 100644
index 0000000..546af96
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/debug/RT-STM32F407-DISCOVERY (OpenOCD, Just Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F407-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="0"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList&gt;&lt;content id=&quot;r3-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;vt_delta-null-chVTDoSetI-(format)&quot; val=&quot;4&quot;/&gt;&lt;/contentList&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F407-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F407-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/main.c
new file mode 100644
index 0000000..e7b5bd3
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/main.c
@@ -0,0 +1,75 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * This is a periodic thread that does absolutely nothing except flashing
+ * a LED.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palSetPad(GPIOD, GPIOD_LED3);       /* Orange.  */
+    chThdSleepMilliseconds(500);
+    palClearPad(GPIOD, GPIOD_LED3);     /* Orange.  */
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 2 using the driver default configuration.
+   * PA2(TX) and PA3(RX) are routed to USART2.
+   */
+  sdStart(&SD2, NULL);
+  palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7));
+  palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7));
+
+  /*
+   * Creates the example thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (palReadPad(GPIOA, GPIOA_BUTTON))
+      TestThread(&SD2);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/mcuconf.h
new file mode 100644
index 0000000..7f15cc1
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/mcuconf.h
@@ -0,0 +1,342 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F4xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_CLOCK48_REQUIRED              TRUE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLM_VALUE                    8
+#define STM32_PLLN_VALUE                    336
+#define STM32_PLLP_VALUE                    2
+#define STM32_PLLQ_VALUE                    7
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV4
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_RTCPRE_VALUE                  8
+#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5
+#define STM32_I2SSRC                        STM32_I2SSRC_CKIN
+#define STM32_PLLI2SN_VALUE                 192
+#define STM32_PLLI2SR_VALUE                 5
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE                 FALSE
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_USE_CAN2                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+#define STM32_CAN_CAN2_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              FALSE
+#define STM32_DAC_USE_DAC1_CH2              FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH1_DMA_STREAM       STM32_DMA_STREAM_ID(1, 5)
+#define STM32_DAC_DAC1_CH2_DMA_STREAM       STM32_DMA_STREAM_ID(1, 6)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI22_IRQ_PRIORITY       15
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_USE_TIM9                  FALSE
+#define STM32_GPT_USE_TIM11                 FALSE
+#define STM32_GPT_USE_TIM12                 FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+#define STM32_GPT_TIM9_IRQ_PRIORITY         7
+#define STM32_GPT_TIM11_IRQ_PRIORITY        7
+#define STM32_GPT_TIM12_IRQ_PRIORITY        7
+#define STM32_GPT_TIM14_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_USE_I2C3                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C3_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_I2C3_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_USE_SPI3                  FALSE
+#define STM32_I2S_SPI2_IRQ_PRIORITY         10
+#define STM32_I2S_SPI3_IRQ_PRIORITY         10
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI3_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2S_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_USE_TIM9                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+#define STM32_ICU_TIM9_IRQ_PRIORITY         7
+
+/*
+ * MAC driver system settings.
+ */
+#define STM32_MAC_TRANSMIT_BUFFERS          2
+#define STM32_MAC_RECEIVE_BUFFERS           4
+#define STM32_MAC_BUFFERS_SIZE              1522
+#define STM32_MAC_PHY_TIMEOUT               100
+#define STM32_MAC_ETH1_CHANGE_PHY_STATE     TRUE
+#define STM32_MAC_ETH1_IRQ_PRIORITY         13
+#define STM32_MAC_IP_CHECKSUM_OFFLOAD       0
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_USE_TIM9                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+#define STM32_PWM_TIM9_IRQ_PRIORITY         7
+
+/*
+ * SDC driver system settings.
+ */
+#define STM32_SDC_SDIO_DMA_PRIORITY         3
+#define STM32_SDC_SDIO_IRQ_PRIORITY         9
+#define STM32_SDC_WRITE_TIMEOUT_MS          250
+#define STM32_SDC_READ_TIMEOUT_MS           25
+#define STM32_SDC_CLOCK_ACTIVATION_DELAY    10
+#define STM32_SDC_SDIO_UNALIGNED_SUPPORT    TRUE
+#define STM32_SDC_SDIO_DMA_STREAM           STM32_DMA_STREAM_ID(2, 3)
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USE_USART6             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+#define STM32_SERIAL_USART6_PRIORITY        12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USE_UART4                FALSE
+#define STM32_UART_USE_UART5                FALSE
+#define STM32_UART_USE_USART6               FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART3_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 1)
+#define STM32_UART_USART3_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_UART4_IRQ_PRIORITY       12
+#define STM32_UART_UART5_IRQ_PRIORITY       12
+#define STM32_UART_USART6_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_UART4_DMA_PRIORITY       0
+#define STM32_UART_UART5_DMA_PRIORITY       0
+#define STM32_UART_USART6_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1                  FALSE
+#define STM32_USB_USE_OTG2                  FALSE
+#define STM32_USB_OTG1_IRQ_PRIORITY         14
+#define STM32_USB_OTG2_IRQ_PRIORITY         14
+#define STM32_USB_OTG1_RX_FIFO_SIZE         512
+#define STM32_USB_OTG2_RX_FIFO_SIZE         1024
+#define STM32_USB_OTG_THREAD_PRIO           LOWPRIO
+#define STM32_USB_OTG_THREAD_STACK_SIZE     128
+#define STM32_USB_OTGFIFO_FILL_BASEPRI      0
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/readme.txt
new file mode 100644
index 0000000..793da2e
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-DISCOVERY/readme.txt
@@ -0,0 +1,25 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 STM32F407.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST STM32F4-Discovery board.
+
+** The Demo **
+
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO. just modify the TRGT line in the makefile in order to use
+different GCC toolchains.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/.cproject
new file mode 100644
index 0000000..a278bf4
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/.cproject
@@ -0,0 +1,62 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.1570569554">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1570569554" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.1570569554" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.1570569554." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.2051275125" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform binaryParser="org.eclipse.cdt.core.ELF" id="org.eclipse.cdt.build.core.prefbase.toolchain.2051275125.1235631892" name=""/>
+							<builder id="org.eclipse.cdt.build.core.settings.default.builder.681215945" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1913618182" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1359024970" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.648690541" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths"/>
+								<option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.1530801237" name="Undefined Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.865562104" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.321395526" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.76286563" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths"/>
+								<option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.1772031118" name="Undefined Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1168908150" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1390938668" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.684710851" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths"/>
+								<option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.1457542840" name="Undefined Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.645908401" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB.null.100047313" name="RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.1570569554">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/.project
new file mode 100644
index 0000000..9fae326
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/.project
@@ -0,0 +1,106 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value>-j1</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>true</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+		<nature>org.eclipse.cdt.core.ccnature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/OLIMEX_STM32_E407</locationURI>
+		</link>
+		<link>
+			<name>fatfs</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/ext/fatfs</locationURI>
+		</link>
+		<link>
+			<name>lwip</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/ext/lwip</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/Makefile
new file mode 100644
index 0000000..97dcc35
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/Makefile
@@ -0,0 +1,225 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/OLIMEX_STM32_E407/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+include $(CHIBIOS)/os/various/lwip_bindings/lwip.mk
+include $(CHIBIOS)/os/various/fatfs_bindings/fatfs.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       $(LWSRC) \
+       $(FATFSSRC) \
+       $(CHIBIOS)/os/various/evtimer.c \
+       $(CHIBIOS)/os/hal/lib/streams/memstreams.c \
+       $(CHIBIOS)/os/hal/lib/streams/chprintf.c \
+       $(CHIBIOS)/os/various/shell.c \
+       web/web.c usbcfg.c main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(LWINC) $(FATFSINC) \
+         $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/chconf.h
new file mode 100644
index 0000000..405149b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   TRUE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           TRUE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                TRUE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               TRUE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 TRUE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 TRUE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/debug/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/debug/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..752c7ee
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/debug/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/ffconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/ffconf.h
new file mode 100644
index 0000000..2af5efe
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/ffconf.h
@@ -0,0 +1,230 @@
+/* CHIBIOS FIX */
+#include "ch.h"
+
+/*---------------------------------------------------------------------------/
+/  FatFs - FAT file system module configuration file  R0.10b (C)ChaN, 2014
+/---------------------------------------------------------------------------*/
+
+#ifndef _FFCONF
+#define _FFCONF 8051    /* Revision ID */
+
+
+/*---------------------------------------------------------------------------/
+/ Functions and Buffer Configurations
+/---------------------------------------------------------------------------*/
+
+#define _FS_TINY        0   /* 0:Normal or 1:Tiny */
+/* When _FS_TINY is set to 1, it reduces memory consumption _MAX_SS bytes each
+/  file object. For file data transfer, FatFs uses the common sector buffer in
+/  the file system object (FATFS) instead of private sector buffer eliminated
+/  from the file object (FIL). */
+
+
+#define _FS_READONLY    0   /* 0:Read/Write or 1:Read only */
+/* Setting _FS_READONLY to 1 defines read only configuration. This removes
+/  writing functions, f_write(), f_sync(), f_unlink(), f_mkdir(), f_chmod(),
+/  f_rename(), f_truncate() and useless f_getfree(). */
+
+
+#define _FS_MINIMIZE    0   /* 0 to 3 */
+/* The _FS_MINIMIZE option defines minimization level to remove API functions.
+/
+/   0: All basic functions are enabled.
+/   1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_chmod(), f_utime(),
+/      f_truncate() and f_rename() function are removed.
+/   2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1.
+/   3: f_lseek() function is removed in addition to 2. */
+
+
+#define _USE_STRFUNC    0   /* 0:Disable or 1-2:Enable */
+/* To enable string functions, set _USE_STRFUNC to 1 or 2. */
+
+
+#define _USE_MKFS       0   /* 0:Disable or 1:Enable */
+/* To enable f_mkfs() function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */
+
+
+#define _USE_FASTSEEK   0   /* 0:Disable or 1:Enable */
+/* To enable fast seek feature, set _USE_FASTSEEK to 1. */
+
+
+#define _USE_LABEL      0   /* 0:Disable or 1:Enable */
+/* To enable volume label functions, set _USE_LAVEL to 1 */
+
+
+#define _USE_FORWARD    0   /* 0:Disable or 1:Enable */
+/* To enable f_forward() function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */
+
+
+/*---------------------------------------------------------------------------/
+/ Locale and Namespace Configurations
+/---------------------------------------------------------------------------*/
+
+#define _CODE_PAGE  1252
+/* The _CODE_PAGE specifies the OEM code page to be used on the target system.
+/  Incorrect setting of the code page can cause a file open failure.
+/
+/   932  - Japanese Shift_JIS (DBCS, OEM, Windows)
+/   936  - Simplified Chinese GBK (DBCS, OEM, Windows)
+/   949  - Korean (DBCS, OEM, Windows)
+/   950  - Traditional Chinese Big5 (DBCS, OEM, Windows)
+/   1250 - Central Europe (Windows)
+/   1251 - Cyrillic (Windows)
+/   1252 - Latin 1 (Windows)
+/   1253 - Greek (Windows)
+/   1254 - Turkish (Windows)
+/   1255 - Hebrew (Windows)
+/   1256 - Arabic (Windows)
+/   1257 - Baltic (Windows)
+/   1258 - Vietnam (OEM, Windows)
+/   437  - U.S. (OEM)
+/   720  - Arabic (OEM)
+/   737  - Greek (OEM)
+/   775  - Baltic (OEM)
+/   850  - Multilingual Latin 1 (OEM)
+/   858  - Multilingual Latin 1 + Euro (OEM)
+/   852  - Latin 2 (OEM)
+/   855  - Cyrillic (OEM)
+/   866  - Russian (OEM)
+/   857  - Turkish (OEM)
+/   862  - Hebrew (OEM)
+/   874  - Thai (OEM, Windows)
+/   1    - ASCII (Valid for only non-LFN configuration) */
+
+
+#define _USE_LFN    3       /* 0 to 3 */
+#define _MAX_LFN    255     /* Maximum LFN length to handle (12 to 255) */
+/* The _USE_LFN option switches the LFN feature.
+/
+/   0: Disable LFN feature. _MAX_LFN has no effect.
+/   1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe.
+/   2: Enable LFN with dynamic working buffer on the STACK.
+/   3: Enable LFN with dynamic working buffer on the HEAP.
+/
+/  When enable LFN feature, Unicode handling functions ff_convert() and ff_wtoupper()
+/  function must be added to the project.
+/  The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. When use stack for the
+/  working buffer, take care on stack overflow. When use heap memory for the working
+/  buffer, memory management functions, ff_memalloc() and ff_memfree(), must be added
+/  to the project. */
+
+
+#define _LFN_UNICODE    0   /* 0:ANSI/OEM or 1:Unicode */
+/* To switch the character encoding on the FatFs API (TCHAR) to Unicode, enable LFN
+/  feature and set _LFN_UNICODE to 1. This option affects behavior of string I/O
+/  functions. This option must be 0 when LFN feature is not enabled. */
+
+
+#define _STRF_ENCODE    3   /* 0:ANSI/OEM, 1:UTF-16LE, 2:UTF-16BE, 3:UTF-8 */
+/* When Unicode API is enabled by _LFN_UNICODE option, this option selects the character
+/  encoding on the file to be read/written via string I/O functions, f_gets(), f_putc(),
+/  f_puts and f_printf(). This option has no effect when Unicode API is not enabled. */
+
+
+#define _FS_RPATH       0   /* 0 to 2 */
+/* The _FS_RPATH option configures relative path feature.
+/
+/   0: Disable relative path feature and remove related functions.
+/   1: Enable relative path. f_chdrive() and f_chdir() function are available.
+/   2: f_getcwd() function is available in addition to 1.
+/
+/  Note that output of the f_readdir() fnction is affected by this option. */
+
+
+/*---------------------------------------------------------------------------/
+/ Drive/Volume Configurations
+/---------------------------------------------------------------------------*/
+
+#define _VOLUMES    1
+/* Number of volumes (logical drives) to be used. */
+
+
+#define _STR_VOLUME_ID  0   /* 0:Use only 0-9 for drive ID, 1:Use strings for drive ID */
+#define _VOLUME_STRS    "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3"
+/* When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive
+/  number in the path name. _VOLUME_STRS defines the drive ID strings for each logical
+/  drives. Number of items must be equal to _VOLUMES. Valid characters for the drive ID
+/  strings are: 0-9 and A-Z. */
+
+
+#define _MULTI_PARTITION    0   /* 0:Single partition, 1:Enable multiple partition */
+/* By default(0), each logical drive number is bound to the same physical drive number
+/  and only a FAT volume found on the physical drive is mounted. When it is set to 1,
+/  each logical drive number is bound to arbitrary drive/partition listed in VolToPart[].
+*/
+
+
+#define _MIN_SS     512
+#define _MAX_SS     512
+/* These options configure the range of sector size to be supported. (512, 1024, 2048 or
+/  4096) Always set both 512 for most systems, all memory card and harddisk. But a larger
+/  value may be required for on-board flash memory and some type of optical media.
+/  When _MAX_SS is larger than _MIN_SS, FatFs is configured to variable sector size and
+/  GET_SECTOR_SIZE command must be implemented to the disk_ioctl() function. */
+
+
+#define _USE_ERASE  0   /* 0:Disable or 1:Enable */
+/* To enable sector erase feature, set _USE_ERASE to 1. Also CTRL_ERASE_SECTOR command
+/  should be added to the disk_ioctl() function. */
+
+
+#define _FS_NOFSINFO    0   /* 0 to 3 */
+/* If you need to know correct free space on the FAT32 volume, set bit 0 of this option
+/  and f_getfree() function at first time after volume mount will force a full FAT scan.
+/  Bit 1 controls the last allocated cluster number as bit 0.
+/
+/  bit0=0: Use free cluster count in the FSINFO if available.
+/  bit0=1: Do not trust free cluster count in the FSINFO.
+/  bit1=0: Use last allocated cluster number in the FSINFO if available.
+/  bit1=1: Do not trust last allocated cluster number in the FSINFO.
+*/
+
+
+
+/*---------------------------------------------------------------------------/
+/ System Configurations
+/---------------------------------------------------------------------------*/
+
+#define _FS_LOCK    0   /* 0:Disable or >=1:Enable */
+/* To enable file lock control feature, set _FS_LOCK to non-zero value.
+/  The value defines how many files/sub-directories can be opened simultaneously
+/  with file lock control. This feature uses bss _FS_LOCK * 12 bytes. */
+
+
+#define _FS_REENTRANT   0               /* 0:Disable or 1:Enable */
+#define _FS_TIMEOUT     MS2ST(1000)     /* Timeout period in unit of time tick */
+#define _SYNC_t         semaphore_t*    /* O/S dependent sync object type. e.g. HANDLE, OS_EVENT*, ID, SemaphoreHandle_t and etc.. */
+/* The _FS_REENTRANT option switches the re-entrancy (thread safe) of the FatFs module.
+/
+/   0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect.
+/   1: Enable re-entrancy. Also user provided synchronization handlers,
+/      ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()
+/      function must be added to the project.
+*/
+
+
+#define _WORD_ACCESS    0   /* 0 or 1 */
+/* The _WORD_ACCESS option is an only platform dependent option. It defines
+/  which access method is used to the word data on the FAT volume.
+/
+/   0: Byte-by-byte access. Always compatible with all platforms.
+/   1: Word access. Do not choose this unless under both the following conditions.
+/
+/  * Address misaligned memory access is always allowed for ALL instructions.
+/  * Byte order on the memory is little-endian.
+/
+/  If it is the case, _WORD_ACCESS can also be set to 1 to improve performance and
+/  reduce code size. Following table shows an example of some processor types.
+/
+/   ARM7TDMI    0           ColdFire    0           V850E2      0
+/   Cortex-M3   0           Z80         0/1         V850ES      0/1
+/   Cortex-M0   0           RX600(LE)   0/1         TLCS-870    0/1
+/   AVR         0/1         RX600(BE)   0           TLCS-900    0/1
+/   AVR32       0           RL78        0           R32C        0
+/   PIC18       0/1         SH-2        0           M16C        0/1
+/   PIC24       0           H8S         0           MSP430      0
+/   PIC32       0           H8/300H     0           x86         0/1
+*/
+
+
+#endif /* _FFCONF */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/halconf.h
new file mode 100644
index 0000000..b38c9cd
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/halconf.h
@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM                  TRUE
+#endif
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 TRUE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          TRUE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/lwipopts.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/lwipopts.h
new file mode 100644
index 0000000..5a8e519
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/lwipopts.h
@@ -0,0 +1,2127 @@
+/**
+ * @file
+ *
+ * lwIP Options Configuration
+ */
+
+/*
+ * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
+ * All rights reserved. 
+ * 
+ * Redistribution and use in source and binary forms, with or without modification, 
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission. 
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ * 
+ * Author: Adam Dunkels <adam@sics.se>
+ *
+ */
+#ifndef __LWIPOPT_H__
+#define __LWIPOPT_H__
+
+
+/*
+   -----------------------------------------------
+   ---------- Platform specific locking ----------
+   -----------------------------------------------
+*/
+
+/**
+ * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain
+ * critical regions during buffer allocation, deallocation and memory
+ * allocation and deallocation.
+ */
+#ifndef SYS_LIGHTWEIGHT_PROT
+#define SYS_LIGHTWEIGHT_PROT            0
+#endif
+
+/** 
+ * NO_SYS==1: Provides VERY minimal functionality. Otherwise,
+ * use lwIP facilities.
+ */
+#ifndef NO_SYS
+#define NO_SYS                          0
+#endif
+
+/**
+ * NO_SYS_NO_TIMERS==1: Drop support for sys_timeout when NO_SYS==1
+ * Mainly for compatibility to old versions.
+ */
+#ifndef NO_SYS_NO_TIMERS
+#define NO_SYS_NO_TIMERS                0
+#endif
+
+/**
+ * MEMCPY: override this if you have a faster implementation at hand than the
+ * one included in your C library
+ */
+#ifndef MEMCPY
+#define MEMCPY(dst,src,len)             memcpy(dst,src,len)
+#endif
+
+/**
+ * SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a
+ * call to memcpy() if the length is known at compile time and is small.
+ */
+#ifndef SMEMCPY
+#define SMEMCPY(dst,src,len)            memcpy(dst,src,len)
+#endif
+
+/*
+   ------------------------------------
+   ---------- Memory options ----------
+   ------------------------------------
+*/
+/**
+ * MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library
+ * instead of the lwip internal allocator. Can save code size if you
+ * already use it.
+ */
+#ifndef MEM_LIBC_MALLOC
+#define MEM_LIBC_MALLOC                 0
+#endif
+
+/**
+* MEMP_MEM_MALLOC==1: Use mem_malloc/mem_free instead of the lwip pool allocator.
+* Especially useful with MEM_LIBC_MALLOC but handle with care regarding execution
+* speed and usage from interrupts!
+*/
+#ifndef MEMP_MEM_MALLOC
+#define MEMP_MEM_MALLOC                 0
+#endif
+
+/**
+ * MEM_ALIGNMENT: should be set to the alignment of the CPU
+ *    4 byte alignment -> #define MEM_ALIGNMENT 4
+ *    2 byte alignment -> #define MEM_ALIGNMENT 2
+ */
+#ifndef MEM_ALIGNMENT
+#define MEM_ALIGNMENT                   4
+#endif
+
+/**
+ * MEM_SIZE: the size of the heap memory. If the application will send
+ * a lot of data that needs to be copied, this should be set high.
+ */
+#ifndef MEM_SIZE
+#define MEM_SIZE                        1600
+#endif
+
+/**
+ * MEMP_SEPARATE_POOLS: if defined to 1, each pool is placed in its own array.
+ * This can be used to individually change the location of each pool.
+ * Default is one big array for all pools
+ */
+#ifndef MEMP_SEPARATE_POOLS
+#define MEMP_SEPARATE_POOLS             0
+#endif
+
+/**
+ * MEMP_OVERFLOW_CHECK: memp overflow protection reserves a configurable
+ * amount of bytes before and after each memp element in every pool and fills
+ * it with a prominent default value.
+ *    MEMP_OVERFLOW_CHECK == 0 no checking
+ *    MEMP_OVERFLOW_CHECK == 1 checks each element when it is freed
+ *    MEMP_OVERFLOW_CHECK >= 2 checks each element in every pool every time
+ *      memp_malloc() or memp_free() is called (useful but slow!)
+ */
+#ifndef MEMP_OVERFLOW_CHECK
+#define MEMP_OVERFLOW_CHECK             0
+#endif
+
+/**
+ * MEMP_SANITY_CHECK==1: run a sanity check after each memp_free() to make
+ * sure that there are no cycles in the linked lists.
+ */
+#ifndef MEMP_SANITY_CHECK
+#define MEMP_SANITY_CHECK               0
+#endif
+
+/**
+ * MEM_USE_POOLS==1: Use an alternative to malloc() by allocating from a set
+ * of memory pools of various sizes. When mem_malloc is called, an element of
+ * the smallest pool that can provide the length needed is returned.
+ * To use this, MEMP_USE_CUSTOM_POOLS also has to be enabled.
+ */
+#ifndef MEM_USE_POOLS
+#define MEM_USE_POOLS                   0
+#endif
+
+/**
+ * MEM_USE_POOLS_TRY_BIGGER_POOL==1: if one malloc-pool is empty, try the next
+ * bigger pool - WARNING: THIS MIGHT WASTE MEMORY but it can make a system more
+ * reliable. */
+#ifndef MEM_USE_POOLS_TRY_BIGGER_POOL
+#define MEM_USE_POOLS_TRY_BIGGER_POOL   0
+#endif
+
+/**
+ * MEMP_USE_CUSTOM_POOLS==1: whether to include a user file lwippools.h
+ * that defines additional pools beyond the "standard" ones required
+ * by lwIP. If you set this to 1, you must have lwippools.h in your 
+ * inlude path somewhere. 
+ */
+#ifndef MEMP_USE_CUSTOM_POOLS
+#define MEMP_USE_CUSTOM_POOLS           0
+#endif
+
+/**
+ * Set this to 1 if you want to free PBUF_RAM pbufs (or call mem_free()) from
+ * interrupt context (or another context that doesn't allow waiting for a
+ * semaphore).
+ * If set to 1, mem_malloc will be protected by a semaphore and SYS_ARCH_PROTECT,
+ * while mem_free will only use SYS_ARCH_PROTECT. mem_malloc SYS_ARCH_UNPROTECTs
+ * with each loop so that mem_free can run.
+ *
+ * ATTENTION: As you can see from the above description, this leads to dis-/
+ * enabling interrupts often, which can be slow! Also, on low memory, mem_malloc
+ * can need longer.
+ *
+ * If you don't want that, at least for NO_SYS=0, you can still use the following
+ * functions to enqueue a deallocation call which then runs in the tcpip_thread
+ * context:
+ * - pbuf_free_callback(p);
+ * - mem_free_callback(m);
+ */
+#ifndef LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT
+#define LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT 0
+#endif
+
+/*
+   ------------------------------------------------
+   ---------- Internal Memory Pool Sizes ----------
+   ------------------------------------------------
+*/
+/**
+ * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF).
+ * If the application sends a lot of data out of ROM (or other static memory),
+ * this should be set high.
+ */
+#ifndef MEMP_NUM_PBUF
+#define MEMP_NUM_PBUF                   16
+#endif
+
+/**
+ * MEMP_NUM_RAW_PCB: Number of raw connection PCBs
+ * (requires the LWIP_RAW option)
+ */
+#ifndef MEMP_NUM_RAW_PCB
+#define MEMP_NUM_RAW_PCB                4
+#endif
+
+/**
+ * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
+ * per active UDP "connection".
+ * (requires the LWIP_UDP option)
+ */
+#ifndef MEMP_NUM_UDP_PCB
+#define MEMP_NUM_UDP_PCB                4
+#endif
+
+/**
+ * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections.
+ * (requires the LWIP_TCP option)
+ */
+#ifndef MEMP_NUM_TCP_PCB
+#define MEMP_NUM_TCP_PCB                5
+#endif
+
+/**
+ * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections.
+ * (requires the LWIP_TCP option)
+ */
+#ifndef MEMP_NUM_TCP_PCB_LISTEN
+#define MEMP_NUM_TCP_PCB_LISTEN         8
+#endif
+
+/**
+ * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments.
+ * (requires the LWIP_TCP option)
+ */
+#ifndef MEMP_NUM_TCP_SEG
+#define MEMP_NUM_TCP_SEG                16
+#endif
+
+/**
+ * MEMP_NUM_REASSDATA: the number of IP packets simultaneously queued for
+ * reassembly (whole packets, not fragments!)
+ */
+#ifndef MEMP_NUM_REASSDATA
+#define MEMP_NUM_REASSDATA              5
+#endif
+
+/**
+ * MEMP_NUM_FRAG_PBUF: the number of IP fragments simultaneously sent
+ * (fragments, not whole packets!).
+ * This is only used with IP_FRAG_USES_STATIC_BUF==0 and
+ * LWIP_NETIF_TX_SINGLE_PBUF==0 and only has to be > 1 with DMA-enabled MACs
+ * where the packet is not yet sent when netif->output returns.
+ */
+#ifndef MEMP_NUM_FRAG_PBUF
+#define MEMP_NUM_FRAG_PBUF              15
+#endif
+
+/**
+ * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing
+ * packets (pbufs) that are waiting for an ARP request (to resolve
+ * their destination address) to finish.
+ * (requires the ARP_QUEUEING option)
+ */
+#ifndef MEMP_NUM_ARP_QUEUE
+#define MEMP_NUM_ARP_QUEUE              30
+#endif
+
+/**
+ * MEMP_NUM_IGMP_GROUP: The number of multicast groups whose network interfaces
+ * can be members et the same time (one per netif - allsystems group -, plus one
+ * per netif membership).
+ * (requires the LWIP_IGMP option)
+ */
+#ifndef MEMP_NUM_IGMP_GROUP
+#define MEMP_NUM_IGMP_GROUP             8
+#endif
+
+/**
+ * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts.
+ * (requires NO_SYS==0)
+ * The default number of timeouts is calculated here for all enabled modules.
+ * The formula expects settings to be either '0' or '1'.
+ */
+#ifndef MEMP_NUM_SYS_TIMEOUT
+#define MEMP_NUM_SYS_TIMEOUT            (LWIP_TCP + IP_REASSEMBLY + LWIP_ARP + (2*LWIP_DHCP) + LWIP_AUTOIP + LWIP_IGMP + LWIP_DNS + PPP_SUPPORT)
+#endif
+
+/**
+ * MEMP_NUM_NETBUF: the number of struct netbufs.
+ * (only needed if you use the sequential API, like api_lib.c)
+ */
+#ifndef MEMP_NUM_NETBUF
+#define MEMP_NUM_NETBUF                 2
+#endif
+
+/**
+ * MEMP_NUM_NETCONN: the number of struct netconns.
+ * (only needed if you use the sequential API, like api_lib.c)
+ */
+#ifndef MEMP_NUM_NETCONN
+#define MEMP_NUM_NETCONN                4
+#endif
+
+/**
+ * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used
+ * for callback/timeout API communication. 
+ * (only needed if you use tcpip.c)
+ */
+#ifndef MEMP_NUM_TCPIP_MSG_API
+#define MEMP_NUM_TCPIP_MSG_API          8
+#endif
+
+/**
+ * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used
+ * for incoming packets. 
+ * (only needed if you use tcpip.c)
+ */
+#ifndef MEMP_NUM_TCPIP_MSG_INPKT
+#define MEMP_NUM_TCPIP_MSG_INPKT        8
+#endif
+
+/**
+ * MEMP_NUM_SNMP_NODE: the number of leafs in the SNMP tree.
+ */
+#ifndef MEMP_NUM_SNMP_NODE
+#define MEMP_NUM_SNMP_NODE              50
+#endif
+
+/**
+ * MEMP_NUM_SNMP_ROOTNODE: the number of branches in the SNMP tree.
+ * Every branch has one leaf (MEMP_NUM_SNMP_NODE) at least!
+ */
+#ifndef MEMP_NUM_SNMP_ROOTNODE
+#define MEMP_NUM_SNMP_ROOTNODE          30
+#endif
+
+/**
+ * MEMP_NUM_SNMP_VARBIND: the number of concurrent requests (does not have to
+ * be changed normally) - 2 of these are used per request (1 for input,
+ * 1 for output)
+ */
+#ifndef MEMP_NUM_SNMP_VARBIND
+#define MEMP_NUM_SNMP_VARBIND           2
+#endif
+
+/**
+ * MEMP_NUM_SNMP_VALUE: the number of OID or values concurrently used
+ * (does not have to be changed normally) - 3 of these are used per request
+ * (1 for the value read and 2 for OIDs - input and output)
+ */
+#ifndef MEMP_NUM_SNMP_VALUE
+#define MEMP_NUM_SNMP_VALUE             3
+#endif
+
+/**
+ * MEMP_NUM_NETDB: the number of concurrently running lwip_addrinfo() calls
+ * (before freeing the corresponding memory using lwip_freeaddrinfo()).
+ */
+#ifndef MEMP_NUM_NETDB
+#define MEMP_NUM_NETDB                  1
+#endif
+
+/**
+ * MEMP_NUM_LOCALHOSTLIST: the number of host entries in the local host list
+ * if DNS_LOCAL_HOSTLIST_IS_DYNAMIC==1.
+ */
+#ifndef MEMP_NUM_LOCALHOSTLIST
+#define MEMP_NUM_LOCALHOSTLIST          1
+#endif
+
+/**
+ * MEMP_NUM_PPPOE_INTERFACES: the number of concurrently active PPPoE
+ * interfaces (only used with PPPOE_SUPPORT==1)
+ */
+#ifndef MEMP_NUM_PPPOE_INTERFACES
+#define MEMP_NUM_PPPOE_INTERFACES       1
+#endif
+
+/**
+ * PBUF_POOL_SIZE: the number of buffers in the pbuf pool. 
+ */
+#ifndef PBUF_POOL_SIZE
+#define PBUF_POOL_SIZE                  16
+#endif
+
+/*
+   ---------------------------------
+   ---------- ARP options ----------
+   ---------------------------------
+*/
+/**
+ * LWIP_ARP==1: Enable ARP functionality.
+ */
+#ifndef LWIP_ARP
+#define LWIP_ARP                        1
+#endif
+
+/**
+ * ARP_TABLE_SIZE: Number of active MAC-IP address pairs cached.
+ */
+#ifndef ARP_TABLE_SIZE
+#define ARP_TABLE_SIZE                  10
+#endif
+
+/**
+ * ARP_QUEUEING==1: Multiple outgoing packets are queued during hardware address
+ * resolution. By default, only the most recent packet is queued per IP address.
+ * This is sufficient for most protocols and mainly reduces TCP connection
+ * startup time. Set this to 1 if you know your application sends more than one
+ * packet in a row to an IP address that is not in the ARP cache.
+ */
+#ifndef ARP_QUEUEING
+#define ARP_QUEUEING                    0
+#endif
+
+/**
+ * ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be
+ * updated with the source MAC and IP addresses supplied in the packet.
+ * You may want to disable this if you do not trust LAN peers to have the
+ * correct addresses, or as a limited approach to attempt to handle
+ * spoofing. If disabled, lwIP will need to make a new ARP request if
+ * the peer is not already in the ARP table, adding a little latency.
+ * The peer *is* in the ARP table if it requested our address before.
+ * Also notice that this slows down input processing of every IP packet!
+ */
+#ifndef ETHARP_TRUST_IP_MAC
+#define ETHARP_TRUST_IP_MAC             0
+#endif
+
+/**
+ * ETHARP_SUPPORT_VLAN==1: support receiving ethernet packets with VLAN header.
+ * Additionally, you can define ETHARP_VLAN_CHECK to an u16_t VLAN ID to check.
+ * If ETHARP_VLAN_CHECK is defined, only VLAN-traffic for this VLAN is accepted.
+ * If ETHARP_VLAN_CHECK is not defined, all traffic is accepted.
+ * Alternatively, define a function/define ETHARP_VLAN_CHECK_FN(eth_hdr, vlan)
+ * that returns 1 to accept a packet or 0 to drop a packet.
+ */
+#ifndef ETHARP_SUPPORT_VLAN
+#define ETHARP_SUPPORT_VLAN             0
+#endif
+
+/** LWIP_ETHERNET==1: enable ethernet support for PPPoE even though ARP
+ * might be disabled
+ */
+#ifndef LWIP_ETHERNET
+#define LWIP_ETHERNET                   (LWIP_ARP || PPPOE_SUPPORT)
+#endif
+
+/** ETH_PAD_SIZE: number of bytes added before the ethernet header to ensure
+ * alignment of payload after that header. Since the header is 14 bytes long,
+ * without this padding e.g. addresses in the IP header will not be aligned
+ * on a 32-bit boundary, so setting this to 2 can speed up 32-bit-platforms.
+ */
+#ifndef ETH_PAD_SIZE
+#define ETH_PAD_SIZE                    0
+#endif
+
+/** ETHARP_SUPPORT_STATIC_ENTRIES==1: enable code to support static ARP table
+ * entries (using etharp_add_static_entry/etharp_remove_static_entry).
+ */
+#ifndef ETHARP_SUPPORT_STATIC_ENTRIES
+#define ETHARP_SUPPORT_STATIC_ENTRIES   0
+#endif
+
+
+/*
+   --------------------------------
+   ---------- IP options ----------
+   --------------------------------
+*/
+/**
+ * IP_FORWARD==1: Enables the ability to forward IP packets across network
+ * interfaces. If you are going to run lwIP on a device with only one network
+ * interface, define this to 0.
+ */
+#ifndef IP_FORWARD
+#define IP_FORWARD                      0
+#endif
+
+/**
+ * IP_OPTIONS_ALLOWED: Defines the behavior for IP options.
+ *      IP_OPTIONS_ALLOWED==0: All packets with IP options are dropped.
+ *      IP_OPTIONS_ALLOWED==1: IP options are allowed (but not parsed).
+ */
+#ifndef IP_OPTIONS_ALLOWED
+#define IP_OPTIONS_ALLOWED              1
+#endif
+
+/**
+ * IP_REASSEMBLY==1: Reassemble incoming fragmented IP packets. Note that
+ * this option does not affect outgoing packet sizes, which can be controlled
+ * via IP_FRAG.
+ */
+#ifndef IP_REASSEMBLY
+#define IP_REASSEMBLY                   1
+#endif
+
+/**
+ * IP_FRAG==1: Fragment outgoing IP packets if their size exceeds MTU. Note
+ * that this option does not affect incoming packet sizes, which can be
+ * controlled via IP_REASSEMBLY.
+ */
+#ifndef IP_FRAG
+#define IP_FRAG                         1
+#endif
+
+/**
+ * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally)
+ * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived
+ * in this time, the whole packet is discarded.
+ */
+#ifndef IP_REASS_MAXAGE
+#define IP_REASS_MAXAGE                 3
+#endif
+
+/**
+ * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled.
+ * Since the received pbufs are enqueued, be sure to configure
+ * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive
+ * packets even if the maximum amount of fragments is enqueued for reassembly!
+ */
+#ifndef IP_REASS_MAX_PBUFS
+#define IP_REASS_MAX_PBUFS              10
+#endif
+
+/**
+ * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP
+ * fragmentation. Otherwise pbufs are allocated and reference the original
+ * packet data to be fragmented (or with LWIP_NETIF_TX_SINGLE_PBUF==1,
+ * new PBUF_RAM pbufs are used for fragments).
+ * ATTENTION: IP_FRAG_USES_STATIC_BUF==1 may not be used for DMA-enabled MACs!
+ */
+#ifndef IP_FRAG_USES_STATIC_BUF
+#define IP_FRAG_USES_STATIC_BUF         0
+#endif
+
+/**
+ * IP_FRAG_MAX_MTU: Assumed max MTU on any interface for IP frag buffer
+ * (requires IP_FRAG_USES_STATIC_BUF==1)
+ */
+#if IP_FRAG_USES_STATIC_BUF && !defined(IP_FRAG_MAX_MTU)
+#define IP_FRAG_MAX_MTU                 1500
+#endif
+
+/**
+ * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers.
+ */
+#ifndef IP_DEFAULT_TTL
+#define IP_DEFAULT_TTL                  255
+#endif
+
+/**
+ * IP_SOF_BROADCAST=1: Use the SOF_BROADCAST field to enable broadcast
+ * filter per pcb on udp and raw send operations. To enable broadcast filter
+ * on recv operations, you also have to set IP_SOF_BROADCAST_RECV=1.
+ */
+#ifndef IP_SOF_BROADCAST
+#define IP_SOF_BROADCAST                0
+#endif
+
+/**
+ * IP_SOF_BROADCAST_RECV (requires IP_SOF_BROADCAST=1) enable the broadcast
+ * filter on recv operations.
+ */
+#ifndef IP_SOF_BROADCAST_RECV
+#define IP_SOF_BROADCAST_RECV           0
+#endif
+
+/**
+ * IP_FORWARD_ALLOW_TX_ON_RX_NETIF==1: allow ip_forward() to send packets back
+ * out on the netif where it was received. This should only be used for
+ * wireless networks.
+ * ATTENTION: When this is 1, make sure your netif driver correctly marks incoming
+ * link-layer-broadcast/multicast packets as such using the corresponding pbuf flags!
+ */
+#ifndef IP_FORWARD_ALLOW_TX_ON_RX_NETIF
+#define IP_FORWARD_ALLOW_TX_ON_RX_NETIF 0
+#endif
+
+/**
+ * LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS==1: randomize the local port for the first
+ * local TCP/UDP pcb (default==0). This can prevent creating predictable port
+ * numbers after booting a device.
+ */
+#ifndef LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS
+#define LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS 0
+#endif
+
+/*
+   ----------------------------------
+   ---------- ICMP options ----------
+   ----------------------------------
+*/
+/**
+ * LWIP_ICMP==1: Enable ICMP module inside the IP stack.
+ * Be careful, disable that make your product non-compliant to RFC1122
+ */
+#ifndef LWIP_ICMP
+#define LWIP_ICMP                       1
+#endif
+
+/**
+ * ICMP_TTL: Default value for Time-To-Live used by ICMP packets.
+ */
+#ifndef ICMP_TTL
+#define ICMP_TTL                       (IP_DEFAULT_TTL)
+#endif
+
+/**
+ * LWIP_BROADCAST_PING==1: respond to broadcast pings (default is unicast only)
+ */
+#ifndef LWIP_BROADCAST_PING
+#define LWIP_BROADCAST_PING             0
+#endif
+
+/**
+ * LWIP_MULTICAST_PING==1: respond to multicast pings (default is unicast only)
+ */
+#ifndef LWIP_MULTICAST_PING
+#define LWIP_MULTICAST_PING             0
+#endif
+
+/*
+   ---------------------------------
+   ---------- RAW options ----------
+   ---------------------------------
+*/
+/**
+ * LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
+ */
+#ifndef LWIP_RAW
+#define LWIP_RAW                        1
+#endif
+
+/**
+ * LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
+ */
+#ifndef RAW_TTL
+#define RAW_TTL                        (IP_DEFAULT_TTL)
+#endif
+
+/*
+   ----------------------------------
+   ---------- DHCP options ----------
+   ----------------------------------
+*/
+/**
+ * LWIP_DHCP==1: Enable DHCP module.
+ */
+#ifndef LWIP_DHCP
+#define LWIP_DHCP                       0
+#endif
+
+/**
+ * DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address.
+ */
+#ifndef DHCP_DOES_ARP_CHECK
+#define DHCP_DOES_ARP_CHECK             ((LWIP_DHCP) && (LWIP_ARP))
+#endif
+
+/*
+   ------------------------------------
+   ---------- AUTOIP options ----------
+   ------------------------------------
+*/
+/**
+ * LWIP_AUTOIP==1: Enable AUTOIP module.
+ */
+#ifndef LWIP_AUTOIP
+#define LWIP_AUTOIP                     0
+#endif
+
+/**
+ * LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on
+ * the same interface at the same time.
+ */
+#ifndef LWIP_DHCP_AUTOIP_COOP
+#define LWIP_DHCP_AUTOIP_COOP           0
+#endif
+
+/**
+ * LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes
+ * that should be sent before falling back on AUTOIP. This can be set
+ * as low as 1 to get an AutoIP address very quickly, but you should
+ * be prepared to handle a changing IP address when DHCP overrides
+ * AutoIP.
+ */
+#ifndef LWIP_DHCP_AUTOIP_COOP_TRIES
+#define LWIP_DHCP_AUTOIP_COOP_TRIES     9
+#endif
+
+/*
+   ----------------------------------
+   ---------- SNMP options ----------
+   ----------------------------------
+*/
+/**
+ * LWIP_SNMP==1: Turn on SNMP module. UDP must be available for SNMP
+ * transport.
+ */
+#ifndef LWIP_SNMP
+#define LWIP_SNMP                       0
+#endif
+
+/**
+ * SNMP_CONCURRENT_REQUESTS: Number of concurrent requests the module will
+ * allow. At least one request buffer is required.
+ * Does not have to be changed unless external MIBs answer request asynchronously
+ */
+#ifndef SNMP_CONCURRENT_REQUESTS
+#define SNMP_CONCURRENT_REQUESTS        1
+#endif
+
+/**
+ * SNMP_TRAP_DESTINATIONS: Number of trap destinations. At least one trap
+ * destination is required
+ */
+#ifndef SNMP_TRAP_DESTINATIONS
+#define SNMP_TRAP_DESTINATIONS          1
+#endif
+
+/**
+ * SNMP_PRIVATE_MIB: 
+ * When using a private MIB, you have to create a file 'private_mib.h' that contains
+ * a 'struct mib_array_node mib_private' which contains your MIB.
+ */
+#ifndef SNMP_PRIVATE_MIB
+#define SNMP_PRIVATE_MIB                0
+#endif
+
+/**
+ * Only allow SNMP write actions that are 'safe' (e.g. disabeling netifs is not
+ * a safe action and disabled when SNMP_SAFE_REQUESTS = 1).
+ * Unsafe requests are disabled by default!
+ */
+#ifndef SNMP_SAFE_REQUESTS
+#define SNMP_SAFE_REQUESTS              1
+#endif
+
+/**
+ * The maximum length of strings used. This affects the size of
+ * MEMP_SNMP_VALUE elements.
+ */
+#ifndef SNMP_MAX_OCTET_STRING_LEN
+#define SNMP_MAX_OCTET_STRING_LEN       127
+#endif
+
+/**
+ * The maximum depth of the SNMP tree.
+ * With private MIBs enabled, this depends on your MIB!
+ * This affects the size of MEMP_SNMP_VALUE elements.
+ */
+#ifndef SNMP_MAX_TREE_DEPTH
+#define SNMP_MAX_TREE_DEPTH             15
+#endif
+
+/**
+ * The size of the MEMP_SNMP_VALUE elements, normally calculated from
+ * SNMP_MAX_OCTET_STRING_LEN and SNMP_MAX_TREE_DEPTH.
+ */
+#ifndef SNMP_MAX_VALUE_SIZE
+#define SNMP_MAX_VALUE_SIZE             LWIP_MAX((SNMP_MAX_OCTET_STRING_LEN)+1, sizeof(s32_t)*(SNMP_MAX_TREE_DEPTH))
+#endif
+
+/*
+   ----------------------------------
+   ---------- IGMP options ----------
+   ----------------------------------
+*/
+/**
+ * LWIP_IGMP==1: Turn on IGMP module. 
+ */
+#ifndef LWIP_IGMP
+#define LWIP_IGMP                       0
+#endif
+
+/*
+   ----------------------------------
+   ---------- DNS options -----------
+   ----------------------------------
+*/
+/**
+ * LWIP_DNS==1: Turn on DNS module. UDP must be available for DNS
+ * transport.
+ */
+#ifndef LWIP_DNS
+#define LWIP_DNS                        0
+#endif
+
+/** DNS maximum number of entries to maintain locally. */
+#ifndef DNS_TABLE_SIZE
+#define DNS_TABLE_SIZE                  4
+#endif
+
+/** DNS maximum host name length supported in the name table. */
+#ifndef DNS_MAX_NAME_LENGTH
+#define DNS_MAX_NAME_LENGTH             256
+#endif
+
+/** The maximum of DNS servers */
+#ifndef DNS_MAX_SERVERS
+#define DNS_MAX_SERVERS                 2
+#endif
+
+/** DNS do a name checking between the query and the response. */
+#ifndef DNS_DOES_NAME_CHECK
+#define DNS_DOES_NAME_CHECK             1
+#endif
+
+/** DNS message max. size. Default value is RFC compliant. */
+#ifndef DNS_MSG_SIZE
+#define DNS_MSG_SIZE                    512
+#endif
+
+/** DNS_LOCAL_HOSTLIST: Implements a local host-to-address list. If enabled,
+ *  you have to define
+ *    #define DNS_LOCAL_HOSTLIST_INIT {{"host1", 0x123}, {"host2", 0x234}}
+ *  (an array of structs name/address, where address is an u32_t in network
+ *  byte order).
+ *
+ *  Instead, you can also use an external function:
+ *  #define DNS_LOOKUP_LOCAL_EXTERN(x) extern u32_t my_lookup_function(const char *name)
+ *  that returns the IP address or INADDR_NONE if not found.
+ */
+#ifndef DNS_LOCAL_HOSTLIST
+#define DNS_LOCAL_HOSTLIST              0
+#endif /* DNS_LOCAL_HOSTLIST */
+
+/** If this is turned on, the local host-list can be dynamically changed
+ *  at runtime. */
+#ifndef DNS_LOCAL_HOSTLIST_IS_DYNAMIC
+#define DNS_LOCAL_HOSTLIST_IS_DYNAMIC   0
+#endif /* DNS_LOCAL_HOSTLIST_IS_DYNAMIC */
+
+/*
+   ---------------------------------
+   ---------- UDP options ----------
+   ---------------------------------
+*/
+/**
+ * LWIP_UDP==1: Turn on UDP.
+ */
+#ifndef LWIP_UDP
+#define LWIP_UDP                        1
+#endif
+
+/**
+ * LWIP_UDPLITE==1: Turn on UDP-Lite. (Requires LWIP_UDP)
+ */
+#ifndef LWIP_UDPLITE
+#define LWIP_UDPLITE                    0
+#endif
+
+/**
+ * UDP_TTL: Default Time-To-Live value.
+ */
+#ifndef UDP_TTL
+#define UDP_TTL                         (IP_DEFAULT_TTL)
+#endif
+
+/**
+ * LWIP_NETBUF_RECVINFO==1: append destination addr and port to every netbuf.
+ */
+#ifndef LWIP_NETBUF_RECVINFO
+#define LWIP_NETBUF_RECVINFO            0
+#endif
+
+/*
+   ---------------------------------
+   ---------- TCP options ----------
+   ---------------------------------
+*/
+/**
+ * LWIP_TCP==1: Turn on TCP.
+ */
+#ifndef LWIP_TCP
+#define LWIP_TCP                        1
+#endif
+
+/**
+ * TCP_TTL: Default Time-To-Live value.
+ */
+#ifndef TCP_TTL
+#define TCP_TTL                         (IP_DEFAULT_TTL)
+#endif
+
+/**
+ * TCP_WND: The size of a TCP window.  This must be at least 
+ * (2 * TCP_MSS) for things to work well
+ */
+#ifndef TCP_WND
+#define TCP_WND                         (4 * TCP_MSS)
+#endif 
+
+/**
+ * TCP_MAXRTX: Maximum number of retransmissions of data segments.
+ */
+#ifndef TCP_MAXRTX
+#define TCP_MAXRTX                      12
+#endif
+
+/**
+ * TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments.
+ */
+#ifndef TCP_SYNMAXRTX
+#define TCP_SYNMAXRTX                   6
+#endif
+
+/**
+ * TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order.
+ * Define to 0 if your device is low on memory.
+ */
+#ifndef TCP_QUEUE_OOSEQ
+#define TCP_QUEUE_OOSEQ                 (LWIP_TCP)
+#endif
+
+/**
+ * TCP_MSS: TCP Maximum segment size. (default is 536, a conservative default,
+ * you might want to increase this.)
+ * For the receive side, this MSS is advertised to the remote side
+ * when opening a connection. For the transmit size, this MSS sets
+ * an upper limit on the MSS advertised by the remote host.
+ */
+#ifndef TCP_MSS
+#define TCP_MSS                         536
+#endif
+
+/**
+ * TCP_CALCULATE_EFF_SEND_MSS: "The maximum size of a segment that TCP really
+ * sends, the 'effective send MSS,' MUST be the smaller of the send MSS (which
+ * reflects the available reassembly buffer size at the remote host) and the
+ * largest size permitted by the IP layer" (RFC 1122)
+ * Setting this to 1 enables code that checks TCP_MSS against the MTU of the
+ * netif used for a connection and limits the MSS if it would be too big otherwise.
+ */
+#ifndef TCP_CALCULATE_EFF_SEND_MSS
+#define TCP_CALCULATE_EFF_SEND_MSS      1
+#endif
+
+
+/**
+ * TCP_SND_BUF: TCP sender buffer space (bytes).
+ * To achieve good performance, this should be at least 2 * TCP_MSS.
+ */
+#ifndef TCP_SND_BUF
+#define TCP_SND_BUF                     (2 * TCP_MSS)
+#endif
+
+/**
+ * TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least
+ * as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work.
+ */
+#ifndef TCP_SND_QUEUELEN
+#define TCP_SND_QUEUELEN                ((4 * (TCP_SND_BUF) + (TCP_MSS - 1))/(TCP_MSS))
+#endif
+
+/**
+ * TCP_SNDLOWAT: TCP writable space (bytes). This must be less than
+ * TCP_SND_BUF. It is the amount of space which must be available in the
+ * TCP snd_buf for select to return writable (combined with TCP_SNDQUEUELOWAT).
+ */
+#ifndef TCP_SNDLOWAT
+#define TCP_SNDLOWAT                    LWIP_MIN(LWIP_MAX(((TCP_SND_BUF)/2), (2 * TCP_MSS) + 1), (TCP_SND_BUF) - 1)
+#endif
+
+/**
+ * TCP_SNDQUEUELOWAT: TCP writable bufs (pbuf count). This must be less
+ * than TCP_SND_QUEUELEN. If the number of pbufs queued on a pcb drops below
+ * this number, select returns writable (combined with TCP_SNDLOWAT).
+ */
+#ifndef TCP_SNDQUEUELOWAT
+#define TCP_SNDQUEUELOWAT               LWIP_MAX(((TCP_SND_QUEUELEN)/2), 5)
+#endif
+
+/**
+ * TCP_OOSEQ_MAX_BYTES: The maximum number of bytes queued on ooseq per pcb.
+ * Default is 0 (no limit). Only valid for TCP_QUEUE_OOSEQ==0.
+ */
+#ifndef TCP_OOSEQ_MAX_BYTES
+#define TCP_OOSEQ_MAX_BYTES             0
+#endif
+
+/**
+ * TCP_OOSEQ_MAX_PBUFS: The maximum number of pbufs queued on ooseq per pcb.
+ * Default is 0 (no limit). Only valid for TCP_QUEUE_OOSEQ==0.
+ */
+#ifndef TCP_OOSEQ_MAX_PBUFS
+#define TCP_OOSEQ_MAX_PBUFS             0
+#endif
+
+/**
+ * TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb.
+ */
+#ifndef TCP_LISTEN_BACKLOG
+#define TCP_LISTEN_BACKLOG              0
+#endif
+
+/**
+ * The maximum allowed backlog for TCP listen netconns.
+ * This backlog is used unless another is explicitly specified.
+ * 0xff is the maximum (u8_t).
+ */
+#ifndef TCP_DEFAULT_LISTEN_BACKLOG
+#define TCP_DEFAULT_LISTEN_BACKLOG      0xff
+#endif
+
+/**
+ * TCP_OVERSIZE: The maximum number of bytes that tcp_write may
+ * allocate ahead of time in an attempt to create shorter pbuf chains
+ * for transmission. The meaningful range is 0 to TCP_MSS. Some
+ * suggested values are:
+ *
+ * 0:         Disable oversized allocation. Each tcp_write() allocates a new
+              pbuf (old behaviour).
+ * 1:         Allocate size-aligned pbufs with minimal excess. Use this if your
+ *            scatter-gather DMA requires aligned fragments.
+ * 128:       Limit the pbuf/memory overhead to 20%.
+ * TCP_MSS:   Try to create unfragmented TCP packets.
+ * TCP_MSS/4: Try to create 4 fragments or less per TCP packet.
+ */
+#ifndef TCP_OVERSIZE
+#define TCP_OVERSIZE                    TCP_MSS
+#endif
+
+/**
+ * LWIP_TCP_TIMESTAMPS==1: support the TCP timestamp option.
+ */
+#ifndef LWIP_TCP_TIMESTAMPS
+#define LWIP_TCP_TIMESTAMPS             0
+#endif
+
+/**
+ * TCP_WND_UPDATE_THRESHOLD: difference in window to trigger an
+ * explicit window update
+ */
+#ifndef TCP_WND_UPDATE_THRESHOLD
+#define TCP_WND_UPDATE_THRESHOLD   (TCP_WND / 4)
+#endif
+
+/**
+ * LWIP_EVENT_API and LWIP_CALLBACK_API: Only one of these should be set to 1.
+ *     LWIP_EVENT_API==1: The user defines lwip_tcp_event() to receive all
+ *         events (accept, sent, etc) that happen in the system.
+ *     LWIP_CALLBACK_API==1: The PCB callback function is called directly
+ *         for the event. This is the default.
+ */
+#if !defined(LWIP_EVENT_API) && !defined(LWIP_CALLBACK_API)
+#define LWIP_EVENT_API                  0
+#define LWIP_CALLBACK_API               1
+#endif
+
+
+/*
+   ----------------------------------
+   ---------- Pbuf options ----------
+   ----------------------------------
+*/
+/**
+ * PBUF_LINK_HLEN: the number of bytes that should be allocated for a
+ * link level header. The default is 14, the standard value for
+ * Ethernet.
+ */
+#ifndef PBUF_LINK_HLEN
+#define PBUF_LINK_HLEN                  (14 + ETH_PAD_SIZE)
+#endif
+
+/**
+ * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is
+ * designed to accomodate single full size TCP frame in one pbuf, including
+ * TCP_MSS, IP header, and link header.
+ */
+#ifndef PBUF_POOL_BUFSIZE
+#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_HLEN)
+#endif
+
+/*
+   ------------------------------------------------
+   ---------- Network Interfaces options ----------
+   ------------------------------------------------
+*/
+/**
+ * LWIP_NETIF_HOSTNAME==1: use DHCP_OPTION_HOSTNAME with netif's hostname
+ * field.
+ */
+#ifndef LWIP_NETIF_HOSTNAME
+#define LWIP_NETIF_HOSTNAME             0
+#endif
+
+/**
+ * LWIP_NETIF_API==1: Support netif api (in netifapi.c)
+ */
+#ifndef LWIP_NETIF_API
+#define LWIP_NETIF_API                  0
+#endif
+
+/**
+ * LWIP_NETIF_STATUS_CALLBACK==1: Support a callback function whenever an interface
+ * changes its up/down status (i.e., due to DHCP IP acquistion)
+ */
+#ifndef LWIP_NETIF_STATUS_CALLBACK
+#define LWIP_NETIF_STATUS_CALLBACK      0
+#endif
+
+/**
+ * LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface
+ * whenever the link changes (i.e., link down)
+ */
+#ifndef LWIP_NETIF_LINK_CALLBACK
+#define LWIP_NETIF_LINK_CALLBACK        0
+#endif
+
+/**
+ * LWIP_NETIF_REMOVE_CALLBACK==1: Support a callback function that is called
+ * when a netif has been removed
+ */
+#ifndef LWIP_NETIF_REMOVE_CALLBACK
+#define LWIP_NETIF_REMOVE_CALLBACK      0
+#endif
+
+/**
+ * LWIP_NETIF_HWADDRHINT==1: Cache link-layer-address hints (e.g. table
+ * indices) in struct netif. TCP and UDP can make use of this to prevent
+ * scanning the ARP table for every sent packet. While this is faster for big
+ * ARP tables or many concurrent connections, it might be counterproductive
+ * if you have a tiny ARP table or if there never are concurrent connections.
+ */
+#ifndef LWIP_NETIF_HWADDRHINT
+#define LWIP_NETIF_HWADDRHINT           0
+#endif
+
+/**
+ * LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP
+ * address equal to the netif IP address, looping them back up the stack.
+ */
+#ifndef LWIP_NETIF_LOOPBACK
+#define LWIP_NETIF_LOOPBACK             0
+#endif
+
+/**
+ * LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback
+ * sending for each netif (0 = disabled)
+ */
+#ifndef LWIP_LOOPBACK_MAX_PBUFS
+#define LWIP_LOOPBACK_MAX_PBUFS         0
+#endif
+
+/**
+ * LWIP_NETIF_LOOPBACK_MULTITHREADING: Indicates whether threading is enabled in
+ * the system, as netifs must change how they behave depending on this setting
+ * for the LWIP_NETIF_LOOPBACK option to work.
+ * Setting this is needed to avoid reentering non-reentrant functions like
+ * tcp_input().
+ *    LWIP_NETIF_LOOPBACK_MULTITHREADING==1: Indicates that the user is using a
+ *       multithreaded environment like tcpip.c. In this case, netif->input()
+ *       is called directly.
+ *    LWIP_NETIF_LOOPBACK_MULTITHREADING==0: Indicates a polling (or NO_SYS) setup.
+ *       The packets are put on a list and netif_poll() must be called in
+ *       the main application loop.
+ */
+#ifndef LWIP_NETIF_LOOPBACK_MULTITHREADING
+#define LWIP_NETIF_LOOPBACK_MULTITHREADING    (!NO_SYS)
+#endif
+
+/**
+ * LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data
+ * to be sent into one single pbuf. This is for compatibility with DMA-enabled
+ * MACs that do not support scatter-gather.
+ * Beware that this might involve CPU-memcpy before transmitting that would not
+ * be needed without this flag! Use this only if you need to!
+ *
+ * @todo: TCP and IP-frag do not work with this, yet:
+ */
+#ifndef LWIP_NETIF_TX_SINGLE_PBUF
+#define LWIP_NETIF_TX_SINGLE_PBUF             0
+#endif /* LWIP_NETIF_TX_SINGLE_PBUF */
+
+/*
+   ------------------------------------
+   ---------- LOOPIF options ----------
+   ------------------------------------
+*/
+/**
+ * LWIP_HAVE_LOOPIF==1: Support loop interface (127.0.0.1) and loopif.c
+ */
+#ifndef LWIP_HAVE_LOOPIF
+#define LWIP_HAVE_LOOPIF                0
+#endif
+
+/*
+   ------------------------------------
+   ---------- SLIPIF options ----------
+   ------------------------------------
+*/
+/**
+ * LWIP_HAVE_SLIPIF==1: Support slip interface and slipif.c
+ */
+#ifndef LWIP_HAVE_SLIPIF
+#define LWIP_HAVE_SLIPIF                0
+#endif
+
+/*
+   ------------------------------------
+   ---------- Thread options ----------
+   ------------------------------------
+*/
+/**
+ * TCPIP_THREAD_NAME: The name assigned to the main tcpip thread.
+ */
+#ifndef TCPIP_THREAD_NAME
+#define TCPIP_THREAD_NAME              "tcpip_thread"
+#endif
+
+/**
+ * TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread.
+ * The stack size value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef TCPIP_THREAD_STACKSIZE
+#define TCPIP_THREAD_STACKSIZE          1024
+#endif
+
+/**
+ * TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread.
+ * The priority value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef TCPIP_THREAD_PRIO
+#define TCPIP_THREAD_PRIO               (LOWPRIO + 1)
+#endif
+
+/**
+ * TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages
+ * The queue size value itself is platform-dependent, but is passed to
+ * sys_mbox_new() when tcpip_init is called.
+ */
+#ifndef TCPIP_MBOX_SIZE
+#define TCPIP_MBOX_SIZE                 MEMP_NUM_PBUF
+#endif
+
+/**
+ * SLIPIF_THREAD_NAME: The name assigned to the slipif_loop thread.
+ */
+#ifndef SLIPIF_THREAD_NAME
+#define SLIPIF_THREAD_NAME             "slipif_loop"
+#endif
+
+/**
+ * SLIP_THREAD_STACKSIZE: The stack size used by the slipif_loop thread.
+ * The stack size value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef SLIPIF_THREAD_STACKSIZE
+#define SLIPIF_THREAD_STACKSIZE         1024
+#endif
+
+/**
+ * SLIPIF_THREAD_PRIO: The priority assigned to the slipif_loop thread.
+ * The priority value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef SLIPIF_THREAD_PRIO
+#define SLIPIF_THREAD_PRIO              (LOWPRIO + 1)
+#endif
+
+/**
+ * PPP_THREAD_NAME: The name assigned to the pppInputThread.
+ */
+#ifndef PPP_THREAD_NAME
+#define PPP_THREAD_NAME                "pppInputThread"
+#endif
+
+/**
+ * PPP_THREAD_STACKSIZE: The stack size used by the pppInputThread.
+ * The stack size value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef PPP_THREAD_STACKSIZE
+#define PPP_THREAD_STACKSIZE            1024
+#endif
+
+/**
+ * PPP_THREAD_PRIO: The priority assigned to the pppInputThread.
+ * The priority value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef PPP_THREAD_PRIO
+#define PPP_THREAD_PRIO                 (LOWPRIO + 1)
+#endif
+
+/**
+ * DEFAULT_THREAD_NAME: The name assigned to any other lwIP thread.
+ */
+#ifndef DEFAULT_THREAD_NAME
+#define DEFAULT_THREAD_NAME            "lwIP"
+#endif
+
+/**
+ * DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread.
+ * The stack size value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef DEFAULT_THREAD_STACKSIZE
+#define DEFAULT_THREAD_STACKSIZE        1024
+#endif
+
+/**
+ * DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread.
+ * The priority value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef DEFAULT_THREAD_PRIO
+#define DEFAULT_THREAD_PRIO             (LOWPRIO + 1)
+#endif
+
+/**
+ * DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
+ * NETCONN_RAW. The queue size value itself is platform-dependent, but is passed
+ * to sys_mbox_new() when the recvmbox is created.
+ */
+#ifndef DEFAULT_RAW_RECVMBOX_SIZE
+#define DEFAULT_RAW_RECVMBOX_SIZE       4
+#endif
+
+/**
+ * DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
+ * NETCONN_UDP. The queue size value itself is platform-dependent, but is passed
+ * to sys_mbox_new() when the recvmbox is created.
+ */
+#ifndef DEFAULT_UDP_RECVMBOX_SIZE
+#define DEFAULT_UDP_RECVMBOX_SIZE       4
+#endif
+
+/**
+ * DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
+ * NETCONN_TCP. The queue size value itself is platform-dependent, but is passed
+ * to sys_mbox_new() when the recvmbox is created.
+ */
+#ifndef DEFAULT_TCP_RECVMBOX_SIZE
+#define DEFAULT_TCP_RECVMBOX_SIZE       40
+#endif
+
+/**
+ * DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections.
+ * The queue size value itself is platform-dependent, but is passed to
+ * sys_mbox_new() when the acceptmbox is created.
+ */
+#ifndef DEFAULT_ACCEPTMBOX_SIZE
+#define DEFAULT_ACCEPTMBOX_SIZE         4
+#endif
+
+/*
+   ----------------------------------------------
+   ---------- Sequential layer options ----------
+   ----------------------------------------------
+*/
+/**
+ * LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!)
+ * Don't use it if you're not an active lwIP project member
+ */
+#ifndef LWIP_TCPIP_CORE_LOCKING
+#define LWIP_TCPIP_CORE_LOCKING         0
+#endif
+
+/**
+ * LWIP_TCPIP_CORE_LOCKING_INPUT: (EXPERIMENTAL!)
+ * Don't use it if you're not an active lwIP project member
+ */
+#ifndef LWIP_TCPIP_CORE_LOCKING_INPUT
+#define LWIP_TCPIP_CORE_LOCKING_INPUT   0
+#endif
+
+/**
+ * LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c)
+ */
+#ifndef LWIP_NETCONN
+#define LWIP_NETCONN                    1
+#endif
+
+/** LWIP_TCPIP_TIMEOUT==1: Enable tcpip_timeout/tcpip_untimeout tod create
+ * timers running in tcpip_thread from another thread.
+ */
+#ifndef LWIP_TCPIP_TIMEOUT
+#define LWIP_TCPIP_TIMEOUT              1
+#endif
+
+/*
+   ------------------------------------
+   ---------- Socket options ----------
+   ------------------------------------
+*/
+/**
+ * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c)
+ */
+#ifndef LWIP_SOCKET
+#define LWIP_SOCKET                     1
+#endif
+
+/**
+ * LWIP_COMPAT_SOCKETS==1: Enable BSD-style sockets functions names.
+ * (only used if you use sockets.c)
+ */
+#ifndef LWIP_COMPAT_SOCKETS
+#define LWIP_COMPAT_SOCKETS             1
+#endif
+
+/**
+ * LWIP_POSIX_SOCKETS_IO_NAMES==1: Enable POSIX-style sockets functions names.
+ * Disable this option if you use a POSIX operating system that uses the same
+ * names (read, write & close). (only used if you use sockets.c)
+ */
+#ifndef LWIP_POSIX_SOCKETS_IO_NAMES
+#define LWIP_POSIX_SOCKETS_IO_NAMES     1
+#endif
+
+/**
+ * LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT
+ * options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set
+ * in seconds. (does not require sockets.c, and will affect tcp.c)
+ */
+#ifndef LWIP_TCP_KEEPALIVE
+#define LWIP_TCP_KEEPALIVE              0
+#endif
+
+/**
+ * LWIP_SO_SNDTIMEO==1: Enable send timeout for sockets/netconns and
+ * SO_SNDTIMEO processing.
+ */
+#ifndef LWIP_SO_SNDTIMEO
+#define LWIP_SO_SNDTIMEO                0
+#endif
+
+/**
+ * LWIP_SO_RCVTIMEO==1: Enable receive timeout for sockets/netconns and
+ * SO_RCVTIMEO processing.
+ */
+#ifndef LWIP_SO_RCVTIMEO
+#define LWIP_SO_RCVTIMEO                0
+#endif
+
+/**
+ * LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing.
+ */
+#ifndef LWIP_SO_RCVBUF
+#define LWIP_SO_RCVBUF                  0
+#endif
+
+/**
+ * If LWIP_SO_RCVBUF is used, this is the default value for recv_bufsize.
+ */
+#ifndef RECV_BUFSIZE_DEFAULT
+#define RECV_BUFSIZE_DEFAULT            INT_MAX
+#endif
+
+/**
+ * SO_REUSE==1: Enable SO_REUSEADDR option.
+ */
+#ifndef SO_REUSE
+#define SO_REUSE                        0
+#endif
+
+/**
+ * SO_REUSE_RXTOALL==1: Pass a copy of incoming broadcast/multicast packets
+ * to all local matches if SO_REUSEADDR is turned on.
+ * WARNING: Adds a memcpy for every packet if passing to more than one pcb!
+ */
+#ifndef SO_REUSE_RXTOALL
+#define SO_REUSE_RXTOALL                0
+#endif
+
+/*
+   ----------------------------------------
+   ---------- Statistics options ----------
+   ----------------------------------------
+*/
+/**
+ * LWIP_STATS==1: Enable statistics collection in lwip_stats.
+ */
+#ifndef LWIP_STATS
+#define LWIP_STATS                      1
+#endif
+
+#if LWIP_STATS
+
+/**
+ * LWIP_STATS_DISPLAY==1: Compile in the statistics output functions.
+ */
+#ifndef LWIP_STATS_DISPLAY
+#define LWIP_STATS_DISPLAY              0
+#endif
+
+/**
+ * LINK_STATS==1: Enable link stats.
+ */
+#ifndef LINK_STATS
+#define LINK_STATS                      1
+#endif
+
+/**
+ * ETHARP_STATS==1: Enable etharp stats.
+ */
+#ifndef ETHARP_STATS
+#define ETHARP_STATS                    (LWIP_ARP)
+#endif
+
+/**
+ * IP_STATS==1: Enable IP stats.
+ */
+#ifndef IP_STATS
+#define IP_STATS                        1
+#endif
+
+/**
+ * IPFRAG_STATS==1: Enable IP fragmentation stats. Default is
+ * on if using either frag or reass.
+ */
+#ifndef IPFRAG_STATS
+#define IPFRAG_STATS                    (IP_REASSEMBLY || IP_FRAG)
+#endif
+
+/**
+ * ICMP_STATS==1: Enable ICMP stats.
+ */
+#ifndef ICMP_STATS
+#define ICMP_STATS                      1
+#endif
+
+/**
+ * IGMP_STATS==1: Enable IGMP stats.
+ */
+#ifndef IGMP_STATS
+#define IGMP_STATS                      (LWIP_IGMP)
+#endif
+
+/**
+ * UDP_STATS==1: Enable UDP stats. Default is on if
+ * UDP enabled, otherwise off.
+ */
+#ifndef UDP_STATS
+#define UDP_STATS                       (LWIP_UDP)
+#endif
+
+/**
+ * TCP_STATS==1: Enable TCP stats. Default is on if TCP
+ * enabled, otherwise off.
+ */
+#ifndef TCP_STATS
+#define TCP_STATS                       (LWIP_TCP)
+#endif
+
+/**
+ * MEM_STATS==1: Enable mem.c stats.
+ */
+#ifndef MEM_STATS
+#define MEM_STATS                       ((MEM_LIBC_MALLOC == 0) && (MEM_USE_POOLS == 0))
+#endif
+
+/**
+ * MEMP_STATS==1: Enable memp.c pool stats.
+ */
+#ifndef MEMP_STATS
+#define MEMP_STATS                      (MEMP_MEM_MALLOC == 0)
+#endif
+
+/**
+ * SYS_STATS==1: Enable system stats (sem and mbox counts, etc).
+ */
+#ifndef SYS_STATS
+#define SYS_STATS                       (NO_SYS == 0)
+#endif
+
+#else
+
+#define LINK_STATS                      0
+#define IP_STATS                        0
+#define IPFRAG_STATS                    0
+#define ICMP_STATS                      0
+#define IGMP_STATS                      0
+#define UDP_STATS                       0
+#define TCP_STATS                       0
+#define MEM_STATS                       0
+#define MEMP_STATS                      0
+#define SYS_STATS                       0
+#define LWIP_STATS_DISPLAY              0
+
+#endif /* LWIP_STATS */
+
+/*
+   ---------------------------------
+   ---------- PPP options ----------
+   ---------------------------------
+*/
+/**
+ * PPP_SUPPORT==1: Enable PPP.
+ */
+#ifndef PPP_SUPPORT
+#define PPP_SUPPORT                     0
+#endif
+
+/**
+ * PPPOE_SUPPORT==1: Enable PPP Over Ethernet
+ */
+#ifndef PPPOE_SUPPORT
+#define PPPOE_SUPPORT                   0
+#endif
+
+/**
+ * PPPOS_SUPPORT==1: Enable PPP Over Serial
+ */
+#ifndef PPPOS_SUPPORT
+#define PPPOS_SUPPORT                   PPP_SUPPORT
+#endif
+
+#if PPP_SUPPORT
+
+/**
+ * NUM_PPP: Max PPP sessions.
+ */
+#ifndef NUM_PPP
+#define NUM_PPP                         1
+#endif
+
+/**
+ * PAP_SUPPORT==1: Support PAP.
+ */
+#ifndef PAP_SUPPORT
+#define PAP_SUPPORT                     0
+#endif
+
+/**
+ * CHAP_SUPPORT==1: Support CHAP.
+ */
+#ifndef CHAP_SUPPORT
+#define CHAP_SUPPORT                    0
+#endif
+
+/**
+ * MSCHAP_SUPPORT==1: Support MSCHAP. CURRENTLY NOT SUPPORTED! DO NOT SET!
+ */
+#ifndef MSCHAP_SUPPORT
+#define MSCHAP_SUPPORT                  0
+#endif
+
+/**
+ * CBCP_SUPPORT==1: Support CBCP. CURRENTLY NOT SUPPORTED! DO NOT SET!
+ */
+#ifndef CBCP_SUPPORT
+#define CBCP_SUPPORT                    0
+#endif
+
+/**
+ * CCP_SUPPORT==1: Support CCP. CURRENTLY NOT SUPPORTED! DO NOT SET!
+ */
+#ifndef CCP_SUPPORT
+#define CCP_SUPPORT                     0
+#endif
+
+/**
+ * VJ_SUPPORT==1: Support VJ header compression.
+ */
+#ifndef VJ_SUPPORT
+#define VJ_SUPPORT                      0
+#endif
+
+/**
+ * MD5_SUPPORT==1: Support MD5 (see also CHAP).
+ */
+#ifndef MD5_SUPPORT
+#define MD5_SUPPORT                     0
+#endif
+
+/*
+ * Timeouts
+ */
+#ifndef FSM_DEFTIMEOUT
+#define FSM_DEFTIMEOUT                  6       /* Timeout time in seconds */
+#endif
+
+#ifndef FSM_DEFMAXTERMREQS
+#define FSM_DEFMAXTERMREQS              2       /* Maximum Terminate-Request transmissions */
+#endif
+
+#ifndef FSM_DEFMAXCONFREQS
+#define FSM_DEFMAXCONFREQS              10      /* Maximum Configure-Request transmissions */
+#endif
+
+#ifndef FSM_DEFMAXNAKLOOPS
+#define FSM_DEFMAXNAKLOOPS              5       /* Maximum number of nak loops */
+#endif
+
+#ifndef UPAP_DEFTIMEOUT
+#define UPAP_DEFTIMEOUT                 6       /* Timeout (seconds) for retransmitting req */
+#endif
+
+#ifndef UPAP_DEFREQTIME
+#define UPAP_DEFREQTIME                 30      /* Time to wait for auth-req from peer */
+#endif
+
+#ifndef CHAP_DEFTIMEOUT
+#define CHAP_DEFTIMEOUT                 6       /* Timeout time in seconds */
+#endif
+
+#ifndef CHAP_DEFTRANSMITS
+#define CHAP_DEFTRANSMITS               10      /* max # times to send challenge */
+#endif
+
+/* Interval in seconds between keepalive echo requests, 0 to disable. */
+#ifndef LCP_ECHOINTERVAL
+#define LCP_ECHOINTERVAL                0
+#endif
+
+/* Number of unanswered echo requests before failure. */
+#ifndef LCP_MAXECHOFAILS
+#define LCP_MAXECHOFAILS                3
+#endif
+
+/* Max Xmit idle time (in jiffies) before resend flag char. */
+#ifndef PPP_MAXIDLEFLAG
+#define PPP_MAXIDLEFLAG                 100
+#endif
+
+/*
+ * Packet sizes
+ *
+ * Note - lcp shouldn't be allowed to negotiate stuff outside these
+ *    limits.  See lcp.h in the pppd directory.
+ * (XXX - these constants should simply be shared by lcp.c instead
+ *    of living in lcp.h)
+ */
+#define PPP_MTU                         1500     /* Default MTU (size of Info field) */
+#ifndef PPP_MAXMTU
+/* #define PPP_MAXMTU  65535 - (PPP_HDRLEN + PPP_FCSLEN) */
+#define PPP_MAXMTU                      1500 /* Largest MTU we allow */
+#endif
+#define PPP_MINMTU                      64
+#define PPP_MRU                         1500     /* default MRU = max length of info field */
+#define PPP_MAXMRU                      1500     /* Largest MRU we allow */
+#ifndef PPP_DEFMRU
+#define PPP_DEFMRU                      296             /* Try for this */
+#endif
+#define PPP_MINMRU                      128             /* No MRUs below this */
+
+#ifndef MAXNAMELEN
+#define MAXNAMELEN                      256     /* max length of hostname or name for auth */
+#endif
+#ifndef MAXSECRETLEN
+#define MAXSECRETLEN                    256     /* max length of password or secret */
+#endif
+
+#endif /* PPP_SUPPORT */
+
+/*
+   --------------------------------------
+   ---------- Checksum options ----------
+   --------------------------------------
+*/
+/**
+ * CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets.
+ */
+#ifndef CHECKSUM_GEN_IP
+#define CHECKSUM_GEN_IP                 1
+#endif
+ 
+/**
+ * CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets.
+ */
+#ifndef CHECKSUM_GEN_UDP
+#define CHECKSUM_GEN_UDP                1
+#endif
+ 
+/**
+ * CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets.
+ */
+#ifndef CHECKSUM_GEN_TCP
+#define CHECKSUM_GEN_TCP                1
+#endif
+
+/**
+ * CHECKSUM_GEN_ICMP==1: Generate checksums in software for outgoing ICMP packets.
+ */
+#ifndef CHECKSUM_GEN_ICMP
+#define CHECKSUM_GEN_ICMP               1
+#endif
+ 
+/**
+ * CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets.
+ */
+#ifndef CHECKSUM_CHECK_IP
+#define CHECKSUM_CHECK_IP               1
+#endif
+ 
+/**
+ * CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets.
+ */
+#ifndef CHECKSUM_CHECK_UDP
+#define CHECKSUM_CHECK_UDP              1
+#endif
+
+/**
+ * CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets.
+ */
+#ifndef CHECKSUM_CHECK_TCP
+#define CHECKSUM_CHECK_TCP              1
+#endif
+
+/**
+ * LWIP_CHECKSUM_ON_COPY==1: Calculate checksum when copying data from
+ * application buffers to pbufs.
+ */
+#ifndef LWIP_CHECKSUM_ON_COPY
+#define LWIP_CHECKSUM_ON_COPY           0
+#endif
+
+/*
+   ---------------------------------------
+   ---------- Hook options ---------------
+   ---------------------------------------
+*/
+
+/* Hooks are undefined by default, define them to a function if you need them. */
+
+/**
+ * LWIP_HOOK_IP4_INPUT(pbuf, input_netif):
+ * - called from ip_input() (IPv4)
+ * - pbuf: received struct pbuf passed to ip_input()
+ * - input_netif: struct netif on which the packet has been received
+ * Return values:
+ * - 0: Hook has not consumed the packet, packet is processed as normal
+ * - != 0: Hook has consumed the packet.
+ * If the hook consumed the packet, 'pbuf' is in the responsibility of the hook
+ * (i.e. free it when done).
+ */
+
+/**
+ * LWIP_HOOK_IP4_ROUTE(dest):
+ * - called from ip_route() (IPv4)
+ * - dest: destination IPv4 address
+ * Returns the destination netif or NULL if no destination netif is found. In
+ * that case, ip_route() continues as normal.
+ */
+
+/*
+   ---------------------------------------
+   ---------- Debugging options ----------
+   ---------------------------------------
+*/
+/**
+ * LWIP_DBG_MIN_LEVEL: After masking, the value of the debug is
+ * compared against this value. If it is smaller, then debugging
+ * messages are written.
+ */
+#ifndef LWIP_DBG_MIN_LEVEL
+#define LWIP_DBG_MIN_LEVEL              LWIP_DBG_LEVEL_ALL
+#endif
+
+/**
+ * LWIP_DBG_TYPES_ON: A mask that can be used to globally enable/disable
+ * debug messages of certain types.
+ */
+#ifndef LWIP_DBG_TYPES_ON
+#define LWIP_DBG_TYPES_ON               LWIP_DBG_ON
+#endif
+
+/**
+ * ETHARP_DEBUG: Enable debugging in etharp.c.
+ */
+#ifndef ETHARP_DEBUG
+#define ETHARP_DEBUG                    LWIP_DBG_OFF
+#endif
+
+/**
+ * NETIF_DEBUG: Enable debugging in netif.c.
+ */
+#ifndef NETIF_DEBUG
+#define NETIF_DEBUG                     LWIP_DBG_OFF
+#endif
+
+/**
+ * PBUF_DEBUG: Enable debugging in pbuf.c.
+ */
+#ifndef PBUF_DEBUG
+#define PBUF_DEBUG                      LWIP_DBG_OFF
+#endif
+
+/**
+ * API_LIB_DEBUG: Enable debugging in api_lib.c.
+ */
+#ifndef API_LIB_DEBUG
+#define API_LIB_DEBUG                   LWIP_DBG_OFF
+#endif
+
+/**
+ * API_MSG_DEBUG: Enable debugging in api_msg.c.
+ */
+#ifndef API_MSG_DEBUG
+#define API_MSG_DEBUG                   LWIP_DBG_OFF
+#endif
+
+/**
+ * SOCKETS_DEBUG: Enable debugging in sockets.c.
+ */
+#ifndef SOCKETS_DEBUG
+#define SOCKETS_DEBUG                   LWIP_DBG_OFF
+#endif
+
+/**
+ * ICMP_DEBUG: Enable debugging in icmp.c.
+ */
+#ifndef ICMP_DEBUG
+#define ICMP_DEBUG                      LWIP_DBG_OFF
+#endif
+
+/**
+ * IGMP_DEBUG: Enable debugging in igmp.c.
+ */
+#ifndef IGMP_DEBUG
+#define IGMP_DEBUG                      LWIP_DBG_OFF
+#endif
+
+/**
+ * INET_DEBUG: Enable debugging in inet.c.
+ */
+#ifndef INET_DEBUG
+#define INET_DEBUG                      LWIP_DBG_OFF
+#endif
+
+/**
+ * IP_DEBUG: Enable debugging for IP.
+ */
+#ifndef IP_DEBUG
+#define IP_DEBUG                        LWIP_DBG_OFF
+#endif
+
+/**
+ * IP_REASS_DEBUG: Enable debugging in ip_frag.c for both frag & reass.
+ */
+#ifndef IP_REASS_DEBUG
+#define IP_REASS_DEBUG                  LWIP_DBG_OFF
+#endif
+
+/**
+ * RAW_DEBUG: Enable debugging in raw.c.
+ */
+#ifndef RAW_DEBUG
+#define RAW_DEBUG                       LWIP_DBG_OFF
+#endif
+
+/**
+ * MEM_DEBUG: Enable debugging in mem.c.
+ */
+#ifndef MEM_DEBUG
+#define MEM_DEBUG                       LWIP_DBG_OFF
+#endif
+
+/**
+ * MEMP_DEBUG: Enable debugging in memp.c.
+ */
+#ifndef MEMP_DEBUG
+#define MEMP_DEBUG                      LWIP_DBG_OFF
+#endif
+
+/**
+ * SYS_DEBUG: Enable debugging in sys.c.
+ */
+#ifndef SYS_DEBUG
+#define SYS_DEBUG                       LWIP_DBG_OFF
+#endif
+
+/**
+ * TIMERS_DEBUG: Enable debugging in timers.c.
+ */
+#ifndef TIMERS_DEBUG
+#define TIMERS_DEBUG                    LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_DEBUG: Enable debugging for TCP.
+ */
+#ifndef TCP_DEBUG
+#define TCP_DEBUG                       LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug.
+ */
+#ifndef TCP_INPUT_DEBUG
+#define TCP_INPUT_DEBUG                 LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_FR_DEBUG: Enable debugging in tcp_in.c for fast retransmit.
+ */
+#ifndef TCP_FR_DEBUG
+#define TCP_FR_DEBUG                    LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_RTO_DEBUG: Enable debugging in TCP for retransmit
+ * timeout.
+ */
+#ifndef TCP_RTO_DEBUG
+#define TCP_RTO_DEBUG                   LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_CWND_DEBUG: Enable debugging for TCP congestion window.
+ */
+#ifndef TCP_CWND_DEBUG
+#define TCP_CWND_DEBUG                  LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_WND_DEBUG: Enable debugging in tcp_in.c for window updating.
+ */
+#ifndef TCP_WND_DEBUG
+#define TCP_WND_DEBUG                   LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions.
+ */
+#ifndef TCP_OUTPUT_DEBUG
+#define TCP_OUTPUT_DEBUG                LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_RST_DEBUG: Enable debugging for TCP with the RST message.
+ */
+#ifndef TCP_RST_DEBUG
+#define TCP_RST_DEBUG                   LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_QLEN_DEBUG: Enable debugging for TCP queue lengths.
+ */
+#ifndef TCP_QLEN_DEBUG
+#define TCP_QLEN_DEBUG                  LWIP_DBG_OFF
+#endif
+
+/**
+ * UDP_DEBUG: Enable debugging in UDP.
+ */
+#ifndef UDP_DEBUG
+#define UDP_DEBUG                       LWIP_DBG_OFF
+#endif
+
+/**
+ * TCPIP_DEBUG: Enable debugging in tcpip.c.
+ */
+#ifndef TCPIP_DEBUG
+#define TCPIP_DEBUG                     LWIP_DBG_OFF
+#endif
+
+/**
+ * PPP_DEBUG: Enable debugging for PPP.
+ */
+#ifndef PPP_DEBUG
+#define PPP_DEBUG                       LWIP_DBG_OFF
+#endif
+
+/**
+ * SLIP_DEBUG: Enable debugging in slipif.c.
+ */
+#ifndef SLIP_DEBUG
+#define SLIP_DEBUG                      LWIP_DBG_OFF
+#endif
+
+/**
+ * DHCP_DEBUG: Enable debugging in dhcp.c.
+ */
+#ifndef DHCP_DEBUG
+#define DHCP_DEBUG                      LWIP_DBG_OFF
+#endif
+
+/**
+ * AUTOIP_DEBUG: Enable debugging in autoip.c.
+ */
+#ifndef AUTOIP_DEBUG
+#define AUTOIP_DEBUG                    LWIP_DBG_OFF
+#endif
+
+/**
+ * SNMP_MSG_DEBUG: Enable debugging for SNMP messages.
+ */
+#ifndef SNMP_MSG_DEBUG
+#define SNMP_MSG_DEBUG                  LWIP_DBG_OFF
+#endif
+
+/**
+ * SNMP_MIB_DEBUG: Enable debugging for SNMP MIBs.
+ */
+#ifndef SNMP_MIB_DEBUG
+#define SNMP_MIB_DEBUG                  LWIP_DBG_OFF
+#endif
+
+/**
+ * DNS_DEBUG: Enable debugging for DNS.
+ */
+#ifndef DNS_DEBUG
+#define DNS_DEBUG                       LWIP_DBG_OFF
+#endif
+
+#endif /* __LWIPOPT_H__ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/main.c
new file mode 100644
index 0000000..8779f50
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/main.c
@@ -0,0 +1,386 @@
+/*
+    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include <stdio.h>
+#include <string.h>
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+#include "chprintf.h"
+#include "shell.h"
+
+#include "lwipthread.h"
+#include "web/web.h"
+
+#include "ff.h"
+
+#include "usbcfg.h"
+
+/*===========================================================================*/
+/* Card insertion monitor.                                                   */
+/*===========================================================================*/
+
+#define POLLING_INTERVAL                10
+#define POLLING_DELAY                   10
+
+/**
+ * @brief   Card monitor timer.
+ */
+static virtual_timer_t tmr;
+
+/**
+ * @brief   Debounce counter.
+ */
+static unsigned cnt;
+
+/**
+ * @brief   Card event sources.
+ */
+static event_source_t inserted_event, removed_event;
+
+/**
+ * @brief   Insertion monitor timer callback function.
+ *
+ * @param[in] p         pointer to the @p BaseBlockDevice object
+ *
+ * @notapi
+ */
+static void tmrfunc(void *p) {
+  BaseBlockDevice *bbdp = p;
+
+  chSysLockFromISR();
+  if (cnt > 0) {
+    if (blkIsInserted(bbdp)) {
+      if (--cnt == 0) {
+        chEvtBroadcastI(&inserted_event);
+      }
+    }
+    else
+      cnt = POLLING_INTERVAL;
+  }
+  else {
+    if (!blkIsInserted(bbdp)) {
+      cnt = POLLING_INTERVAL;
+      chEvtBroadcastI(&removed_event);
+    }
+  }
+  chVTSetI(&tmr, MS2ST(POLLING_DELAY), tmrfunc, bbdp);
+  chSysUnlockFromISR();
+}
+
+/**
+ * @brief   Polling monitor start.
+ *
+ * @param[in] p         pointer to an object implementing @p BaseBlockDevice
+ *
+ * @notapi
+ */
+static void tmr_init(void *p) {
+
+  chEvtObjectInit(&inserted_event);
+  chEvtObjectInit(&removed_event);
+  chSysLock();
+  cnt = POLLING_INTERVAL;
+  chVTSetI(&tmr, MS2ST(POLLING_DELAY), tmrfunc, p);
+  chSysUnlock();
+}
+
+/*===========================================================================*/
+/* FatFs related.                                                            */
+/*===========================================================================*/
+
+/**
+ * @brief FS object.
+ */
+static FATFS SDC_FS;
+
+/* FS mounted and ready.*/
+static bool fs_ready = FALSE;
+
+/* Generic large buffer.*/
+static uint8_t fbuff[1024];
+
+static FRESULT scan_files(BaseSequentialStream *chp, char *path) {
+  FRESULT res;
+  FILINFO fno;
+  DIR dir;
+  int i;
+  char *fn;
+
+#if _USE_LFN
+  fno.lfname = 0;
+  fno.lfsize = 0;
+#endif
+  res = f_opendir(&dir, path);
+  if (res == FR_OK) {
+    i = strlen(path);
+    for (;;) {
+      res = f_readdir(&dir, &fno);
+      if (res != FR_OK || fno.fname[0] == 0)
+        break;
+      if (fno.fname[0] == '.')
+        continue;
+      fn = fno.fname;
+      if (fno.fattrib & AM_DIR) {
+        path[i++] = '/';
+        strcpy(&path[i], fn);
+        res = scan_files(chp, path);
+        if (res != FR_OK)
+          break;
+        path[--i] = 0;
+      }
+      else {
+        chprintf(chp, "%s/%s\r\n", path, fn);
+      }
+    }
+  }
+  return res;
+}
+
+/*===========================================================================*/
+/* Command line related.                                                     */
+/*===========================================================================*/
+
+#define SHELL_WA_SIZE   THD_WORKING_AREA_SIZE(2048)
+#define TEST_WA_SIZE    THD_WORKING_AREA_SIZE(256)
+
+static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
+  size_t n, size;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: mem\r\n");
+    return;
+  }
+  n = chHeapStatus(NULL, &size);
+  chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX());
+  chprintf(chp, "heap fragments   : %u\r\n", n);
+  chprintf(chp, "heap free total  : %u bytes\r\n", size);
+}
+
+static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
+  static const char *states[] = {CH_STATE_NAMES};
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: threads\r\n");
+    return;
+  }
+  chprintf(chp, "    addr    stack prio refs     state time\r\n");
+  tp = chRegFirstThread();
+  do {
+    chprintf(chp, "%08lx %08lx %4lu %4lu %9s\r\n",
+            (uint32_t)tp, (uint32_t)tp->p_ctx.r13,
+            (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
+            states[tp->p_state]);
+    tp = chRegNextThread(tp);
+  } while (tp != NULL);
+}
+
+static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: test\r\n");
+    return;
+  }
+  tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(),
+                           TestThread, chp);
+  if (tp == NULL) {
+    chprintf(chp, "out of memory\r\n");
+    return;
+  }
+  chThdWait(tp);
+}
+
+static void cmd_tree(BaseSequentialStream *chp, int argc, char *argv[]) {
+  FRESULT err;
+  uint32_t clusters;
+  FATFS *fsp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: tree\r\n");
+    return;
+  }
+  if (!fs_ready) {
+    chprintf(chp, "File System not mounted\r\n");
+    return;
+  }
+  err = f_getfree("/", &clusters, &fsp);
+  if (err != FR_OK) {
+    chprintf(chp, "FS: f_getfree() failed\r\n");
+    return;
+  }
+  chprintf(chp,
+           "FS: %lu free clusters, %lu sectors per cluster, %lu bytes free\r\n",
+           clusters, (uint32_t)SDC_FS.csize,
+           clusters * (uint32_t)SDC_FS.csize * (uint32_t)MMCSD_BLOCK_SIZE);
+  fbuff[0] = 0;
+  scan_files(chp, (char *)fbuff);
+}
+
+static const ShellCommand commands[] = {
+  {"mem", cmd_mem},
+  {"threads", cmd_threads},
+  {"test", cmd_test},
+  {"tree", cmd_tree},
+  {NULL, NULL}
+};
+
+static const ShellConfig shell_cfg1 = {
+  (BaseSequentialStream *)&SDU1,
+  commands
+};
+
+/*===========================================================================*/
+/* Main and generic code.                                                    */
+/*===========================================================================*/
+
+/*
+ * Card insertion event.
+ */
+static void InsertHandler(eventid_t id) {
+  FRESULT err;
+
+  (void)id;
+  /*
+   * On insertion SDC initialization and FS mount.
+   */
+  if (sdcConnect(&SDCD1))
+    return;
+
+  err = f_mount(&SDC_FS, "/", 1);
+  if (err != FR_OK) {
+    sdcDisconnect(&SDCD1);
+    return;
+  }
+  fs_ready = TRUE;
+}
+
+/*
+ * Card removal event.
+ */
+static void RemoveHandler(eventid_t id) {
+
+  (void)id;
+  sdcDisconnect(&SDCD1);
+  fs_ready = FALSE;
+}
+
+/*
+ * Green LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palTogglePad(GPIOC, GPIOC_LED);
+    chThdSleepMilliseconds(fs_ready ? 125 : 500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+  static thread_t *shelltp = NULL;
+  static const evhandler_t evhndl[] = {
+    InsertHandler,
+    RemoveHandler
+  };
+  event_listener_t el0, el1;
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   * - lwIP subsystem initialization using the default configuration.
+   */
+  halInit();
+  chSysInit();
+  lwipInit(NULL);
+
+  /*
+   * Initializes a serial-over-USB CDC driver.
+   */
+  sduObjectInit(&SDU1);
+  sduStart(&SDU1, &serusbcfg);
+
+  /*
+   * Activates the USB driver and then the USB bus pull-up on D+.
+   * Note, a delay is inserted in order to not have to disconnect the cable
+   * after a reset.
+   */
+  usbDisconnectBus(serusbcfg.usbp);
+  chThdSleepMilliseconds(1500);
+  usbStart(serusbcfg.usbp, &usbcfg);
+  usbConnectBus(serusbcfg.usbp);
+
+  /*
+   * Shell manager initialization.
+   */
+  shellInit();
+
+  /*
+   * Activates the serial driver 6 and SDC driver 1 using default
+   * configuration.
+   */
+  sdStart(&SD6, NULL);
+  sdcStart(&SDCD1, NULL);
+
+  /*
+   * Activates the card insertion monitor.
+   */
+  tmr_init(&SDCD1);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Creates the HTTP thread (it changes priority internally).
+   */
+  chThdCreateStatic(wa_http_server, sizeof(wa_http_server), NORMALPRIO + 1,
+                    http_server, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and listen for events.
+   */
+  chEvtRegister(&inserted_event, &el0, 0);
+  chEvtRegister(&removed_event, &el1, 1);
+  while (true) {
+    if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE))
+      shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
+    else if (chThdTerminatedX(shelltp)) {
+      chThdRelease(shelltp);    /* Recovers memory of the previous shell.   */
+      shelltp = NULL;           /* Triggers spawning of a new shell.        */
+    }
+    if (palReadPad(GPIOA, GPIOA_BUTTON_WKUP) != 0) {
+    }
+    chEvtDispatch(evhndl, chEvtWaitOneTimeout(ALL_EVENTS, MS2ST(500)));
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/mcuconf.h
new file mode 100644
index 0000000..23ab072
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/mcuconf.h
@@ -0,0 +1,342 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F4xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_CLOCK48_REQUIRED              TRUE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLM_VALUE                    12
+#define STM32_PLLN_VALUE                    336
+#define STM32_PLLP_VALUE                    2
+#define STM32_PLLQ_VALUE                    7
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV4
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_RTCPRE_VALUE                  8
+#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5
+#define STM32_I2SSRC                        STM32_I2SSRC_CKIN
+#define STM32_PLLI2SN_VALUE                 192
+#define STM32_PLLI2SR_VALUE                 5
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE                 FALSE
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_USE_CAN2                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+#define STM32_CAN_CAN2_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              FALSE
+#define STM32_DAC_USE_DAC1_CH2              FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH1_DMA_STREAM       STM32_DMA_STREAM_ID(1, 5)
+#define STM32_DAC_DAC1_CH2_DMA_STREAM       STM32_DMA_STREAM_ID(1, 6)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI22_IRQ_PRIORITY       15
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_USE_TIM9                  FALSE
+#define STM32_GPT_USE_TIM11                 FALSE
+#define STM32_GPT_USE_TIM12                 FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+#define STM32_GPT_TIM9_IRQ_PRIORITY         7
+#define STM32_GPT_TIM11_IRQ_PRIORITY        7
+#define STM32_GPT_TIM12_IRQ_PRIORITY        7
+#define STM32_GPT_TIM14_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_USE_I2C3                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C3_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_I2C3_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_USE_SPI3                  FALSE
+#define STM32_I2S_SPI2_IRQ_PRIORITY         10
+#define STM32_I2S_SPI3_IRQ_PRIORITY         10
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI3_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2S_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_USE_TIM9                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+#define STM32_ICU_TIM9_IRQ_PRIORITY         7
+
+/*
+ * MAC driver system settings.
+ */
+#define STM32_MAC_TRANSMIT_BUFFERS          2
+#define STM32_MAC_RECEIVE_BUFFERS           4
+#define STM32_MAC_BUFFERS_SIZE              1522
+#define STM32_MAC_PHY_TIMEOUT               100
+#define STM32_MAC_ETH1_CHANGE_PHY_STATE     TRUE
+#define STM32_MAC_ETH1_IRQ_PRIORITY         13
+#define STM32_MAC_IP_CHECKSUM_OFFLOAD       0
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_USE_TIM9                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+#define STM32_PWM_TIM9_IRQ_PRIORITY         7
+
+/*
+ * SDC driver system settings.
+ */
+#define STM32_SDC_SDIO_DMA_PRIORITY         3
+#define STM32_SDC_SDIO_IRQ_PRIORITY         9
+#define STM32_SDC_WRITE_TIMEOUT_MS          250
+#define STM32_SDC_READ_TIMEOUT_MS           25
+#define STM32_SDC_CLOCK_ACTIVATION_DELAY    10
+#define STM32_SDC_SDIO_UNALIGNED_SUPPORT    TRUE
+#define STM32_SDC_SDIO_DMA_STREAM           STM32_DMA_STREAM_ID(2, 3)
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USE_USART6             TRUE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+#define STM32_SERIAL_USART6_PRIORITY        12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USE_UART4                FALSE
+#define STM32_UART_USE_UART5                FALSE
+#define STM32_UART_USE_USART6               FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART3_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 1)
+#define STM32_UART_USART3_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_UART4_IRQ_PRIORITY       12
+#define STM32_UART_UART5_IRQ_PRIORITY       12
+#define STM32_UART_USART6_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_UART4_DMA_PRIORITY       0
+#define STM32_UART_UART5_DMA_PRIORITY       0
+#define STM32_UART_USART6_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1                  TRUE
+#define STM32_USB_USE_OTG2                  FALSE
+#define STM32_USB_OTG1_IRQ_PRIORITY         14
+#define STM32_USB_OTG2_IRQ_PRIORITY         14
+#define STM32_USB_OTG1_RX_FIFO_SIZE         512
+#define STM32_USB_OTG2_RX_FIFO_SIZE         1024
+#define STM32_USB_OTG_THREAD_PRIO           LOWPRIO
+#define STM32_USB_OTG_THREAD_STACK_SIZE     128
+#define STM32_USB_OTGFIFO_FILL_BASEPRI      0
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/readme.txt
new file mode 100644
index 0000000..0ab7ecf
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/readme.txt
@@ -0,0 +1,30 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 STM32F407.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an Olimex STM32-E407 board.
+
+** The Demo **
+
+The demo currently just flashes a LED using a thread and serves HTTP requests
+at address 192.168.1.10 on port 80.
+FatFs integrated using SDIO.
+The USB-FS port is used as USB-CDC and a command shell is ready to accepts
+commands there.
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/usbcfg.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/usbcfg.c
new file mode 100644
index 0000000..80f0165
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/usbcfg.c
@@ -0,0 +1,336 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+/* Virtual serial port over USB.*/
+SerialUSBDriver SDU1;
+
+/*
+ * Endpoints to be used for USBD1.
+ */
+#define USBD1_DATA_REQUEST_EP           1
+#define USBD1_DATA_AVAILABLE_EP         1
+#define USBD1_INTERRUPT_REQUEST_EP      2
+
+/*
+ * USB Device Descriptor.
+ */
+static const uint8_t vcom_device_descriptor_data[18] = {
+  USB_DESC_DEVICE       (0x0110,        /* bcdUSB (1.1).                    */
+                         0x02,          /* bDeviceClass (CDC).              */
+                         0x00,          /* bDeviceSubClass.                 */
+                         0x00,          /* bDeviceProtocol.                 */
+                         0x40,          /* bMaxPacketSize.                  */
+                         0x0483,        /* idVendor (ST).                   */
+                         0x5740,        /* idProduct.                       */
+                         0x0200,        /* bcdDevice.                       */
+                         1,             /* iManufacturer.                   */
+                         2,             /* iProduct.                        */
+                         3,             /* iSerialNumber.                   */
+                         1)             /* bNumConfigurations.              */
+};
+
+/*
+ * Device Descriptor wrapper.
+ */
+static const USBDescriptor vcom_device_descriptor = {
+  sizeof vcom_device_descriptor_data,
+  vcom_device_descriptor_data
+};
+
+/* Configuration Descriptor tree for a CDC.*/
+static const uint8_t vcom_configuration_descriptor_data[67] = {
+  /* Configuration Descriptor.*/
+  USB_DESC_CONFIGURATION(67,            /* wTotalLength.                    */
+                         0x02,          /* bNumInterfaces.                  */
+                         0x01,          /* bConfigurationValue.             */
+                         0,             /* iConfiguration.                  */
+                         0xC0,          /* bmAttributes (self powered).     */
+                         50),           /* bMaxPower (100mA).               */
+  /* Interface Descriptor.*/
+  USB_DESC_INTERFACE    (0x00,          /* bInterfaceNumber.                */
+                         0x00,          /* bAlternateSetting.               */
+                         0x01,          /* bNumEndpoints.                   */
+                         0x02,          /* bInterfaceClass (Communications
+                                           Interface Class, CDC section
+                                           4.2).                            */
+                         0x02,          /* bInterfaceSubClass (Abstract
+                                         Control Model, CDC section 4.3).   */
+                         0x01,          /* bInterfaceProtocol (AT commands,
+                                           CDC section 4.4).                */
+                         0),            /* iInterface.                      */
+  /* Header Functional Descriptor (CDC section 5.2.3).*/
+  USB_DESC_BYTE         (5),            /* bLength.                         */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x00),         /* bDescriptorSubtype (Header
+                                           Functional Descriptor.           */
+  USB_DESC_BCD          (0x0110),       /* bcdCDC.                          */
+  /* Call Management Functional Descriptor. */
+  USB_DESC_BYTE         (5),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x01),         /* bDescriptorSubtype (Call Management
+                                           Functional Descriptor).          */
+  USB_DESC_BYTE         (0x00),         /* bmCapabilities (D0+D1).          */
+  USB_DESC_BYTE         (0x01),         /* bDataInterface.                  */
+  /* ACM Functional Descriptor.*/
+  USB_DESC_BYTE         (4),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x02),         /* bDescriptorSubtype (Abstract
+                                           Control Management Descriptor).  */
+  USB_DESC_BYTE         (0x02),         /* bmCapabilities.                  */
+  /* Union Functional Descriptor.*/
+  USB_DESC_BYTE         (5),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x06),         /* bDescriptorSubtype (Union
+                                           Functional Descriptor).          */
+  USB_DESC_BYTE         (0x00),         /* bMasterInterface (Communication
+                                           Class Interface).                */
+  USB_DESC_BYTE         (0x01),         /* bSlaveInterface0 (Data Class
+                                           Interface).                      */
+  /* Endpoint 2 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD1_INTERRUPT_REQUEST_EP|0x80,
+                         0x03,          /* bmAttributes (Interrupt).        */
+                         0x0008,        /* wMaxPacketSize.                  */
+                         0xFF),         /* bInterval.                       */
+  /* Interface Descriptor.*/
+  USB_DESC_INTERFACE    (0x01,          /* bInterfaceNumber.                */
+                         0x00,          /* bAlternateSetting.               */
+                         0x02,          /* bNumEndpoints.                   */
+                         0x0A,          /* bInterfaceClass (Data Class
+                                           Interface, CDC section 4.5).     */
+                         0x00,          /* bInterfaceSubClass (CDC section
+                                           4.6).                            */
+                         0x00,          /* bInterfaceProtocol (CDC section
+                                           4.7).                            */
+                         0x00),         /* iInterface.                      */
+  /* Endpoint 3 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD1_DATA_AVAILABLE_EP,       /* bEndpointAddress.*/
+                         0x02,          /* bmAttributes (Bulk).             */
+                         0x0040,        /* wMaxPacketSize.                  */
+                         0x00),         /* bInterval.                       */
+  /* Endpoint 1 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD1_DATA_REQUEST_EP|0x80,    /* bEndpointAddress.*/
+                         0x02,          /* bmAttributes (Bulk).             */
+                         0x0040,        /* wMaxPacketSize.                  */
+                         0x00)          /* bInterval.                       */
+};
+
+/*
+ * Configuration Descriptor wrapper.
+ */
+static const USBDescriptor vcom_configuration_descriptor = {
+  sizeof vcom_configuration_descriptor_data,
+  vcom_configuration_descriptor_data
+};
+
+/*
+ * U.S. English language identifier.
+ */
+static const uint8_t vcom_string0[] = {
+  USB_DESC_BYTE(4),                     /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  USB_DESC_WORD(0x0409)                 /* wLANGID (U.S. English).          */
+};
+
+/*
+ * Vendor string.
+ */
+static const uint8_t vcom_string1[] = {
+  USB_DESC_BYTE(38),                    /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0,
+  'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0,
+  'c', 0, 's', 0
+};
+
+/*
+ * Device Description string.
+ */
+static const uint8_t vcom_string2[] = {
+  USB_DESC_BYTE(56),                    /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0,
+  'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0,
+  'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0,
+  'o', 0, 'r', 0, 't', 0
+};
+
+/*
+ * Serial Number string.
+ */
+static const uint8_t vcom_string3[] = {
+  USB_DESC_BYTE(8),                     /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  '0' + CH_KERNEL_MAJOR, 0,
+  '0' + CH_KERNEL_MINOR, 0,
+  '0' + CH_KERNEL_PATCH, 0
+};
+
+/*
+ * Strings wrappers array.
+ */
+static const USBDescriptor vcom_strings[] = {
+  {sizeof vcom_string0, vcom_string0},
+  {sizeof vcom_string1, vcom_string1},
+  {sizeof vcom_string2, vcom_string2},
+  {sizeof vcom_string3, vcom_string3}
+};
+
+/*
+ * Handles the GET_DESCRIPTOR callback. All required descriptors must be
+ * handled here.
+ */
+static const USBDescriptor *get_descriptor(USBDriver *usbp,
+                                           uint8_t dtype,
+                                           uint8_t dindex,
+                                           uint16_t lang) {
+
+  (void)usbp;
+  (void)lang;
+  switch (dtype) {
+  case USB_DESCRIPTOR_DEVICE:
+    return &vcom_device_descriptor;
+  case USB_DESCRIPTOR_CONFIGURATION:
+    return &vcom_configuration_descriptor;
+  case USB_DESCRIPTOR_STRING:
+    if (dindex < 4)
+      return &vcom_strings[dindex];
+  }
+  return NULL;
+}
+
+/**
+ * @brief   IN EP1 state.
+ */
+static USBInEndpointState ep1instate;
+
+/**
+ * @brief   OUT EP1 state.
+ */
+static USBOutEndpointState ep1outstate;
+
+/**
+ * @brief   EP1 initialization structure (both IN and OUT).
+ */
+static const USBEndpointConfig ep1config = {
+  USB_EP_MODE_TYPE_BULK,
+  NULL,
+  sduDataTransmitted,
+  sduDataReceived,
+  0x0040,
+  0x0040,
+  &ep1instate,
+  &ep1outstate,
+  2,
+  NULL
+};
+
+/**
+ * @brief   IN EP2 state.
+ */
+static USBInEndpointState ep2instate;
+
+/**
+ * @brief   EP2 initialization structure (IN only).
+ */
+static const USBEndpointConfig ep2config = {
+  USB_EP_MODE_TYPE_INTR,
+  NULL,
+  sduInterruptTransmitted,
+  NULL,
+  0x0010,
+  0x0000,
+  &ep2instate,
+  NULL,
+  1,
+  NULL
+};
+
+/*
+ * Handles the USB driver global events.
+ */
+static void usb_event(USBDriver *usbp, usbevent_t event) {
+  extern SerialUSBDriver SDU1;
+
+  switch (event) {
+  case USB_EVENT_RESET:
+    return;
+  case USB_EVENT_ADDRESS:
+    return;
+  case USB_EVENT_CONFIGURED:
+    chSysLockFromISR();
+
+    /* Enables the endpoints specified into the configuration.
+       Note, this callback is invoked from an ISR so I-Class functions
+       must be used.*/
+    usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config);
+    usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config);
+
+    /* Resetting the state of the CDC subsystem.*/
+    sduConfigureHookI(&SDU1);
+
+    chSysUnlockFromISR();
+    return;
+  case USB_EVENT_UNCONFIGURED:
+    return;
+  case USB_EVENT_SUSPEND:
+    chSysLockFromISR();
+
+    /* Disconnection event on suspend.*/
+    sduDisconnectI(&SDU1);
+
+    chSysUnlockFromISR();
+    return;
+  case USB_EVENT_WAKEUP:
+    return;
+  case USB_EVENT_STALLED:
+    return;
+  }
+  return;
+}
+
+/*
+ * Handles the USB driver global events.
+ */
+static void sof_handler(USBDriver *usbp) {
+
+  (void)usbp;
+
+  osalSysLockFromISR();
+  sduSOFHookI(&SDU1);
+  osalSysUnlockFromISR();
+}
+
+/*
+ * USB driver configuration.
+ */
+const USBConfig usbcfg = {
+  usb_event,
+  get_descriptor,
+  sduRequestsHook,
+  sof_handler
+};
+
+/*
+ * Serial over USB driver configuration.
+ */
+const SerialUSBConfig serusbcfg = {
+  &USBD1,
+  USBD1_DATA_REQUEST_EP,
+  USBD1_DATA_AVAILABLE_EP,
+  USBD1_INTERRUPT_REQUEST_EP
+};
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/usbcfg.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/usbcfg.h
new file mode 100644
index 0000000..2da1c40
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/usbcfg.h
@@ -0,0 +1,26 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _USBCFG_H_
+#define _USBCFG_H_
+
+extern const USBConfig usbcfg;
+extern SerialUSBConfig serusbcfg;
+extern SerialUSBDriver SDU1;
+
+#endif  /* _USBCFG_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/web/web.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/web/web.c
new file mode 100644
index 0000000..1907fc6
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/web/web.c
@@ -0,0 +1,121 @@
+/*
+    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file is a modified version of the lwIP web server demo. The original
+ * author is unknown because the file didn't contain any license information.
+ */
+
+/**
+ * @file web.c
+ * @brief HTTP server wrapper thread code.
+ * @addtogroup WEB_THREAD
+ * @{
+ */
+
+#include "ch.h"
+
+#include "lwip/opt.h"
+#include "lwip/arch.h"
+#include "lwip/api.h"
+
+#include "web.h"
+
+#if LWIP_NETCONN
+
+static const char http_html_hdr[] = "HTTP/1.1 200 OK\r\nContent-type: text/html\r\n\r\n";
+static const char http_index_html[] = "<html><head><title>Congrats!</title></head><body><h1>Welcome to our lwIP HTTP server!</h1><p>This is a small test page.</body></html>";
+
+static void http_server_serve(struct netconn *conn) {
+  struct netbuf *inbuf;
+  char *buf;
+  u16_t buflen;
+  err_t err;
+
+  /* Read the data from the port, blocking if nothing yet there.
+   We assume the request (the part we care about) is in one netbuf */
+  err = netconn_recv(conn, &inbuf);
+
+  if (err == ERR_OK) {
+    netbuf_data(inbuf, (void **)&buf, &buflen);
+
+    /* Is this an HTTP GET command? (only check the first 5 chars, since
+    there are other formats for GET, and we're keeping it very simple )*/
+    if (buflen>=5 &&
+        buf[0]=='G' &&
+        buf[1]=='E' &&
+        buf[2]=='T' &&
+        buf[3]==' ' &&
+        buf[4]=='/' ) {
+
+      /* Send the HTML header
+             * subtract 1 from the size, since we dont send the \0 in the string
+             * NETCONN_NOCOPY: our data is const static, so no need to copy it
+       */
+      netconn_write(conn, http_html_hdr, sizeof(http_html_hdr)-1, NETCONN_NOCOPY);
+
+      /* Send our HTML page */
+      netconn_write(conn, http_index_html, sizeof(http_index_html)-1, NETCONN_NOCOPY);
+    }
+  }
+  /* Close the connection (server closes in HTTP) */
+  netconn_close(conn);
+
+  /* Delete the buffer (netconn_recv gives us ownership,
+   so we have to make sure to deallocate the buffer) */
+  netbuf_delete(inbuf);
+}
+
+/**
+ * Stack area for the http thread.
+ */
+THD_WORKING_AREA(wa_http_server, WEB_THREAD_STACK_SIZE);
+
+/**
+ * HTTP server thread.
+ */
+THD_FUNCTION(http_server, p) {
+  struct netconn *conn, *newconn;
+  err_t err;
+
+  (void)p;
+  chRegSetThreadName("http");
+
+  /* Create a new TCP connection handle */
+  conn = netconn_new(NETCONN_TCP);
+  LWIP_ERROR("http_server: invalid conn", (conn != NULL), chThdExit(MSG_RESET););
+
+  /* Bind to port 80 (HTTP) with default IP address */
+  netconn_bind(conn, NULL, WEB_THREAD_PORT);
+
+  /* Put the connection into LISTEN state */
+  netconn_listen(conn);
+
+  /* Goes to the final priority after initialization.*/
+  chThdSetPriority(WEB_THREAD_PRIORITY);
+
+  while (true) {
+    err = netconn_accept(conn, &newconn);
+    if (err != ERR_OK)
+      continue;
+    http_server_serve(newconn);
+    netconn_delete(newconn);
+  }
+}
+
+#endif /* LWIP_NETCONN */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/web/web.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/web/web.h
new file mode 100644
index 0000000..902bf9b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F407-OLIMEX_E407-LWIP-FATFS-USB/web/web.h
@@ -0,0 +1,51 @@
+/*
+    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file web.h
+ * @brief HTTP server wrapper thread macros and structures.
+ * @addtogroup WEB_THREAD
+ * @{
+ */
+
+#ifndef _WEB_H_
+#define _WEB_H_
+
+#ifndef WEB_THREAD_STACK_SIZE
+#define WEB_THREAD_STACK_SIZE   1024
+#endif
+
+#ifndef WEB_THREAD_PORT
+#define WEB_THREAD_PORT         80
+#endif
+
+#ifndef WEB_THREAD_PRIORITY
+#define WEB_THREAD_PRIORITY     (LOWPRIO + 2)
+#endif
+
+extern THD_WORKING_AREA(wa_http_server, WEB_THREAD_STACK_SIZE);
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+  THD_FUNCTION(http_server, p);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _WEB_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/.cproject
new file mode 100644
index 0000000..f0beab8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/.cproject
@@ -0,0 +1,54 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.603687198">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.603687198" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.603687198" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.603687198." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963.1446538340" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1490952991" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1134067298" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1927705259" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1013764026" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1367371861" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1824820452" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1584496456" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1781547795" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F411RE-NUCLEO.null.1004513353" name="RT-STM32F411RE-NUCLEO"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.603687198">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32F411RE-NUCLEO"/>
+		</configuration>
+	</storageModule>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/.project
new file mode 100644
index 0000000..6e5895d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F411RE-NUCLEO</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_NUCLEO_F411RE</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/Makefile
new file mode 100644
index 0000000..d0e1aa0
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_NUCLEO_F411RE/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F411xE.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/chconf.h
new file mode 100644
index 0000000..7d99062
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/debug/RT-STM32F411RE-NUCLEO (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/debug/RT-STM32F411RE-NUCLEO (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..240ddb5
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/debug/RT-STM32F411RE-NUCLEO (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F411RE-NUCLEO\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F411RE-NUCLEO"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.603687198"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F411RE-NUCLEO"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/main.c
new file mode 100644
index 0000000..bd50f19
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/main.c
@@ -0,0 +1,71 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * Red LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palClearPad(GPIOA, GPIOA_LED_GREEN);
+    chThdSleepMilliseconds(500);
+    palSetPad(GPIOA, GPIOA_LED_GREEN);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 2 using the driver default configuration.
+   */
+  sdStart(&SD2, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (!palReadPad(GPIOC, GPIOC_BUTTON))
+      TestThread(&SD2);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/mcuconf.h
new file mode 100644
index 0000000..e9eda1a
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/mcuconf.h
@@ -0,0 +1,251 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F4xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_CLOCK48_REQUIRED              TRUE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI
+#define STM32_PLLM_VALUE                    16
+#define STM32_PLLN_VALUE                    384
+#define STM32_PLLP_VALUE                    4
+#define STM32_PLLQ_VALUE                    8
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV2
+#define STM32_PPRE2                         STM32_PPRE2_DIV1
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_RTCPRE_VALUE                  8
+#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5
+#define STM32_I2SSRC                        STM32_I2SSRC_CKIN
+#define STM32_PLLI2SN_VALUE                 192
+#define STM32_PLLI2SR_VALUE                 5
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE                 FALSE
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI22_IRQ_PRIORITY       15
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM9                  FALSE
+#define STM32_GPT_USE_TIM11                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM9_IRQ_PRIORITY         7
+#define STM32_GPT_TIM11_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_USE_I2C3                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C3_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_I2C3_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_USE_SPI3                  FALSE
+#define STM32_I2S_SPI2_IRQ_PRIORITY         10
+#define STM32_I2S_SPI3_IRQ_PRIORITY         10
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI3_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2S_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM9                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM9_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM9                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM9_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART6             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART6_PRIORITY        12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  TRUE
+#define STM32_SPI_USE_SPI2                  TRUE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART6               FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART6_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART6_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1                  FALSE
+#define STM32_USB_OTG1_IRQ_PRIORITY         14
+#define STM32_USB_OTG1_RX_FIFO_SIZE         512
+#define STM32_USB_OTG_THREAD_PRIO           LOWPRIO
+#define STM32_USB_OTG_THREAD_STACK_SIZE     128
+#define STM32_USB_OTGFIFO_FILL_BASEPRI      0
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/readme.txt
new file mode 100644
index 0000000..911e56e
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F411RE-NUCLEO/readme.txt
@@ -0,0 +1,28 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 STM32F411.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST_NUCLEO_F411RE board.
+
+** The Demo **
+
+The demo flashes the board LED using a thread, by pressing the button located
+on the board the test procedure is activated with output on the serial port
+SD2 (USART2, mapped on USB virtual COM port).
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/.cproject
new file mode 100644
index 0000000..c087bd2
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/.cproject
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.114656749">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.114656749." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F429-DISCOVERY.null.1703860681" name="ARMCM4-STM32F407-DISCOVERY-ALT"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.114656749">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32F429-DISCOVERY"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/.project
new file mode 100644
index 0000000..86c3460
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/.project
@@ -0,0 +1,90 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F429-DISCOVERY</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value>-j1</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>true</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/Makefile
new file mode 100644
index 0000000..f99504f
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/Makefile
@@ -0,0 +1,219 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F429I_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F429xI.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       $(CHIBIOS)/os/various/shell.c \
+       $(CHIBIOS)/os/hal/lib/streams/memstreams.c \
+       $(CHIBIOS)/os/hal/lib/streams/chprintf.c \
+       usbcfg.c main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/chconf.h
new file mode 100644
index 0000000..7d99062
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/debug/RT-STM32F429-DISCOVERY (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/debug/RT-STM32F429-DISCOVERY (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..3ef1e94
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/debug/RT-STM32F429-DISCOVERY (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F429-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F429-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F429-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/halconf.h
new file mode 100644
index 0000000..6ebcb21
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          TRUE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/main.c
new file mode 100644
index 0000000..f423b23
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/main.c
@@ -0,0 +1,198 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+#include "chprintf.h"
+#include "shell.h"
+
+#include "usbcfg.h"
+
+/*
+ * Red LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker1");
+  while (true) {
+    palClearPad(GPIOG, GPIOG_LED4_RED);
+    chThdSleepMilliseconds(500);
+    palSetPad(GPIOG, GPIOG_LED4_RED);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Green LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread2, 128);
+static THD_FUNCTION(Thread2, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker2");
+  while (true) {
+    palClearPad(GPIOG, GPIOG_LED3_GREEN);
+    chThdSleepMilliseconds(250);
+    palSetPad(GPIOG, GPIOG_LED3_GREEN);
+    chThdSleepMilliseconds(250);
+  }
+}
+
+/*===========================================================================*/
+/* Command line related.                                                     */
+/*===========================================================================*/
+
+#define SHELL_WA_SIZE   THD_WORKING_AREA_SIZE(2048)
+#define TEST_WA_SIZE    THD_WORKING_AREA_SIZE(256)
+
+static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
+  size_t n, size;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: mem\r\n");
+    return;
+  }
+  n = chHeapStatus(NULL, &size);
+  chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX());
+  chprintf(chp, "heap fragments   : %u\r\n", n);
+  chprintf(chp, "heap free total  : %u bytes\r\n", size);
+}
+
+static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
+  static const char *states[] = {CH_STATE_NAMES};
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: threads\r\n");
+    return;
+  }
+  chprintf(chp, "    addr    stack prio refs     state time\r\n");
+  tp = chRegFirstThread();
+  do {
+    chprintf(chp, "%08lx %08lx %4lu %4lu %9s\r\n",
+            (uint32_t)tp, (uint32_t)tp->p_ctx.r13,
+            (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
+            states[tp->p_state]);
+    tp = chRegNextThread(tp);
+  } while (tp != NULL);
+}
+
+static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: test\r\n");
+    return;
+  }
+  tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(),
+                           TestThread, chp);
+  if (tp == NULL) {
+    chprintf(chp, "out of memory\r\n");
+    return;
+  }
+  chThdWait(tp);
+}
+
+static const ShellCommand commands[] = {
+  {"mem", cmd_mem},
+  {"threads", cmd_threads},
+  {"test", cmd_test},
+  {NULL, NULL}
+};
+
+static const ShellConfig shell_cfg1 = {
+  (BaseSequentialStream *)&SDU1,
+  commands
+};
+
+/*===========================================================================*/
+/* Initialization and main thread.                                           */
+/*===========================================================================*/
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+  thread_t *shelltp = NULL;
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Shell manager initialization.
+   */
+  shellInit();
+
+  /*
+   * Initializes a serial-over-USB CDC driver.
+   */
+  sduObjectInit(&SDU1);
+  sduStart(&SDU1, &serusbcfg);
+
+  /*
+   * Activates the USB driver and then the USB bus pull-up on D+.
+   * Note, a delay is inserted in order to not have to disconnect the cable
+   * after a reset.
+   */
+  usbDisconnectBus(serusbcfg.usbp);
+  chThdSleepMilliseconds(1000);
+  usbStart(serusbcfg.usbp, &usbcfg);
+  usbConnectBus(serusbcfg.usbp);
+
+  /*
+   * Creating the blinker threads.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1),
+                    NORMALPRIO + 10, Thread1, NULL);
+  chThdCreateStatic(waThread2, sizeof(waThread2),
+                    NORMALPRIO + 10, Thread2, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it just performs
+   * a shell respawn upon its termination.
+   */
+  while (true) {
+    if (!shelltp) {
+      if (SDU1.config->usbp->state == USB_ACTIVE) {
+        /* Spawns a new shell.*/
+        shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
+      }
+    }
+    else {
+      /* If the previous shell exited.*/
+      if (chThdTerminatedX(shelltp)) {
+        /* Recovers memory of the previous shell.*/
+        chThdRelease(shelltp);
+        shelltp = NULL;
+      }
+    }
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/mcuconf.h
new file mode 100644
index 0000000..06f8024
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/mcuconf.h
@@ -0,0 +1,361 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F4xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_CLOCK48_REQUIRED              TRUE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLM_VALUE                    8
+#define STM32_PLLN_VALUE                    336
+#define STM32_PLLP_VALUE                    2
+#define STM32_PLLQ_VALUE                    7
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV4
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+#define STM32_RTCPRE_VALUE                  8
+#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV5
+#define STM32_I2SSRC                        STM32_I2SSRC_CKIN
+#define STM32_PLLI2SN_VALUE                 192
+#define STM32_PLLI2SR_VALUE                 5
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE                 FALSE
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_USE_CAN2                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+#define STM32_CAN_CAN2_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              FALSE
+#define STM32_DAC_USE_DAC1_CH2              FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH1_DMA_STREAM       STM32_DMA_STREAM_ID(1, 5)
+#define STM32_DAC_DAC1_CH2_DMA_STREAM       STM32_DMA_STREAM_ID(1, 6)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI22_IRQ_PRIORITY       15
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_USE_TIM9                  FALSE
+#define STM32_GPT_USE_TIM11                 FALSE
+#define STM32_GPT_USE_TIM12                 FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+#define STM32_GPT_TIM9_IRQ_PRIORITY         7
+#define STM32_GPT_TIM11_IRQ_PRIORITY        7
+#define STM32_GPT_TIM12_IRQ_PRIORITY        7
+#define STM32_GPT_TIM14_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_USE_I2C3                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C3_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_I2C3_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * I2S driver system settings.
+ */
+#define STM32_I2S_USE_SPI2                  FALSE
+#define STM32_I2S_USE_SPI3                  FALSE
+#define STM32_I2S_SPI2_IRQ_PRIORITY         10
+#define STM32_I2S_SPI3_IRQ_PRIORITY         10
+#define STM32_I2S_SPI2_DMA_PRIORITY         1
+#define STM32_I2S_SPI3_DMA_PRIORITY         1
+#define STM32_I2S_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2S_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2S_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2S_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2S_DMA_ERROR_HOOK(i2sp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_USE_TIM9                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+#define STM32_ICU_TIM9_IRQ_PRIORITY         7
+
+/*
+ * MAC driver system settings.
+ */
+#define STM32_MAC_TRANSMIT_BUFFERS          2
+#define STM32_MAC_RECEIVE_BUFFERS           4
+#define STM32_MAC_BUFFERS_SIZE              1522
+#define STM32_MAC_PHY_TIMEOUT               100
+#define STM32_MAC_ETH1_CHANGE_PHY_STATE     TRUE
+#define STM32_MAC_ETH1_IRQ_PRIORITY         13
+#define STM32_MAC_IP_CHECKSUM_OFFLOAD       0
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_USE_TIM9                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+#define STM32_PWM_TIM9_IRQ_PRIORITY         7
+
+/*
+ * SDC driver system settings.
+ */
+#define STM32_SDC_SDIO_DMA_PRIORITY         3
+#define STM32_SDC_SDIO_IRQ_PRIORITY         9
+#define STM32_SDC_WRITE_TIMEOUT_MS          250
+#define STM32_SDC_READ_TIMEOUT_MS           25
+#define STM32_SDC_CLOCK_ACTIVATION_DELAY    10
+#define STM32_SDC_SDIO_UNALIGNED_SUPPORT    TRUE
+#define STM32_SDC_SDIO_DMA_STREAM           STM32_DMA_STREAM_ID(2, 3)
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USE_USART6             FALSE
+#define STM32_SERIAL_USE_UART7              FALSE
+#define STM32_SERIAL_USE_UART8              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+#define STM32_SERIAL_USART6_PRIORITY        12
+#define STM32_SERIAL_UART7_PRIORITY         12
+#define STM32_SERIAL_UART8_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_USE_SPI4                  FALSE
+#define STM32_SPI_USE_SPI5                  FALSE
+#define STM32_SPI_USE_SPI6                  FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI4_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI4_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 1)
+#define STM32_SPI_SPI5_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI5_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 4)
+#define STM32_SPI_SPI6_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 6)
+#define STM32_SPI_SPI6_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 5)
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI4_DMA_PRIORITY         1
+#define STM32_SPI_SPI5_DMA_PRIORITY         1
+#define STM32_SPI_SPI6_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_SPI4_IRQ_PRIORITY         10
+#define STM32_SPI_SPI5_IRQ_PRIORITY         10
+#define STM32_SPI_SPI6_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USE_UART4                FALSE
+#define STM32_UART_USE_UART5                FALSE
+#define STM32_UART_USE_USART6               FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART3_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 1)
+#define STM32_UART_USART3_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_UART4_IRQ_PRIORITY       12
+#define STM32_UART_UART5_IRQ_PRIORITY       12
+#define STM32_UART_USART6_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_UART4_DMA_PRIORITY       0
+#define STM32_UART_UART5_DMA_PRIORITY       0
+#define STM32_UART_USART6_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1                  FALSE
+#define STM32_USB_USE_OTG2                  TRUE
+#define STM32_USB_OTG1_IRQ_PRIORITY         14
+#define STM32_USB_OTG2_IRQ_PRIORITY         14
+#define STM32_USB_OTG1_RX_FIFO_SIZE         512
+#define STM32_USB_OTG2_RX_FIFO_SIZE         1024
+#define STM32_USB_OTG_THREAD_PRIO           LOWPRIO
+#define STM32_USB_OTG_THREAD_STACK_SIZE     128
+#define STM32_USB_OTGFIFO_FILL_BASEPRI      0
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/readme.txt
new file mode 100644
index 0000000..03810ff
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/readme.txt
@@ -0,0 +1,27 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 STM32F429.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST STM32F429I-Discovery board.
+
+** The Demo **
+
+A simple command shell is activated on virtual serial port SD2 via USB-CDC
+driver (use micro-USB plug on STM32F4-Discovery board).
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO. just modify the TRGT line in the makefile in order to use
+different GCC toolchains.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/usbcfg.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/usbcfg.c
new file mode 100644
index 0000000..7ed5911
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/usbcfg.c
@@ -0,0 +1,336 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+/* Virtual serial port over USB.*/
+SerialUSBDriver SDU1;
+
+/*
+ * Endpoints to be used for USBD2.
+ */
+#define USBD2_DATA_REQUEST_EP           1
+#define USBD2_DATA_AVAILABLE_EP         1
+#define USBD2_INTERRUPT_REQUEST_EP      2
+
+/*
+ * USB Device Descriptor.
+ */
+static const uint8_t vcom_device_descriptor_data[18] = {
+  USB_DESC_DEVICE       (0x0110,        /* bcdUSB (1.1).                    */
+                         0x02,          /* bDeviceClass (CDC).              */
+                         0x00,          /* bDeviceSubClass.                 */
+                         0x00,          /* bDeviceProtocol.                 */
+                         0x40,          /* bMaxPacketSize.                  */
+                         0x0483,        /* idVendor (ST).                   */
+                         0x5740,        /* idProduct.                       */
+                         0x0200,        /* bcdDevice.                       */
+                         1,             /* iManufacturer.                   */
+                         2,             /* iProduct.                        */
+                         3,             /* iSerialNumber.                   */
+                         1)             /* bNumConfigurations.              */
+};
+
+/*
+ * Device Descriptor wrapper.
+ */
+static const USBDescriptor vcom_device_descriptor = {
+  sizeof vcom_device_descriptor_data,
+  vcom_device_descriptor_data
+};
+
+/* Configuration Descriptor tree for a CDC.*/
+static const uint8_t vcom_configuration_descriptor_data[67] = {
+  /* Configuration Descriptor.*/
+  USB_DESC_CONFIGURATION(67,            /* wTotalLength.                    */
+                         0x02,          /* bNumInterfaces.                  */
+                         0x01,          /* bConfigurationValue.             */
+                         0,             /* iConfiguration.                  */
+                         0xC0,          /* bmAttributes (self powered).     */
+                         50),           /* bMaxPower (100mA).               */
+  /* Interface Descriptor.*/
+  USB_DESC_INTERFACE    (0x00,          /* bInterfaceNumber.                */
+                         0x00,          /* bAlternateSetting.               */
+                         0x01,          /* bNumEndpoints.                   */
+                         0x02,          /* bInterfaceClass (Communications
+                                           Interface Class, CDC section
+                                           4.2).                            */
+                         0x02,          /* bInterfaceSubClass (Abstract
+                                         Control Model, CDC section 4.3).   */
+                         0x01,          /* bInterfaceProtocol (AT commands,
+                                           CDC section 4.4).                */
+                         0),            /* iInterface.                      */
+  /* Header Functional Descriptor (CDC section 5.2.3).*/
+  USB_DESC_BYTE         (5),            /* bLength.                         */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x00),         /* bDescriptorSubtype (Header
+                                           Functional Descriptor.           */
+  USB_DESC_BCD          (0x0110),       /* bcdCDC.                          */
+  /* Call Management Functional Descriptor. */
+  USB_DESC_BYTE         (5),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x01),         /* bDescriptorSubtype (Call Management
+                                           Functional Descriptor).          */
+  USB_DESC_BYTE         (0x00),         /* bmCapabilities (D0+D1).          */
+  USB_DESC_BYTE         (0x01),         /* bDataInterface.                  */
+  /* ACM Functional Descriptor.*/
+  USB_DESC_BYTE         (4),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x02),         /* bDescriptorSubtype (Abstract
+                                           Control Management Descriptor).  */
+  USB_DESC_BYTE         (0x02),         /* bmCapabilities.                  */
+  /* Union Functional Descriptor.*/
+  USB_DESC_BYTE         (5),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x06),         /* bDescriptorSubtype (Union
+                                           Functional Descriptor).          */
+  USB_DESC_BYTE         (0x00),         /* bMasterInterface (Communication
+                                           Class Interface).                */
+  USB_DESC_BYTE         (0x01),         /* bSlaveInterface0 (Data Class
+                                           Interface).                      */
+  /* Endpoint 2 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD2_INTERRUPT_REQUEST_EP|0x80,
+                         0x03,          /* bmAttributes (Interrupt).        */
+                         0x0008,        /* wMaxPacketSize.                  */
+                         0xFF),         /* bInterval.                       */
+  /* Interface Descriptor.*/
+  USB_DESC_INTERFACE    (0x01,          /* bInterfaceNumber.                */
+                         0x00,          /* bAlternateSetting.               */
+                         0x02,          /* bNumEndpoints.                   */
+                         0x0A,          /* bInterfaceClass (Data Class
+                                           Interface, CDC section 4.5).     */
+                         0x00,          /* bInterfaceSubClass (CDC section
+                                           4.6).                            */
+                         0x00,          /* bInterfaceProtocol (CDC section
+                                           4.7).                            */
+                         0x00),         /* iInterface.                      */
+  /* Endpoint 3 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD2_DATA_AVAILABLE_EP,       /* bEndpointAddress.*/
+                         0x02,          /* bmAttributes (Bulk).             */
+                         0x0040,        /* wMaxPacketSize.                  */
+                         0x00),         /* bInterval.                       */
+  /* Endpoint 1 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD2_DATA_REQUEST_EP|0x80,    /* bEndpointAddress.*/
+                         0x02,          /* bmAttributes (Bulk).             */
+                         0x0040,        /* wMaxPacketSize.                  */
+                         0x00)          /* bInterval.                       */
+};
+
+/*
+ * Configuration Descriptor wrapper.
+ */
+static const USBDescriptor vcom_configuration_descriptor = {
+  sizeof vcom_configuration_descriptor_data,
+  vcom_configuration_descriptor_data
+};
+
+/*
+ * U.S. English language identifier.
+ */
+static const uint8_t vcom_string0[] = {
+  USB_DESC_BYTE(4),                     /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  USB_DESC_WORD(0x0409)                 /* wLANGID (U.S. English).          */
+};
+
+/*
+ * Vendor string.
+ */
+static const uint8_t vcom_string1[] = {
+  USB_DESC_BYTE(38),                    /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0,
+  'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0,
+  'c', 0, 's', 0
+};
+
+/*
+ * Device Description string.
+ */
+static const uint8_t vcom_string2[] = {
+  USB_DESC_BYTE(56),                    /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0,
+  'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0,
+  'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0,
+  'o', 0, 'r', 0, 't', 0
+};
+
+/*
+ * Serial Number string.
+ */
+static const uint8_t vcom_string3[] = {
+  USB_DESC_BYTE(8),                     /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  '0' + CH_KERNEL_MAJOR, 0,
+  '0' + CH_KERNEL_MINOR, 0,
+  '0' + CH_KERNEL_PATCH, 0
+};
+
+/*
+ * Strings wrappers array.
+ */
+static const USBDescriptor vcom_strings[] = {
+  {sizeof vcom_string0, vcom_string0},
+  {sizeof vcom_string1, vcom_string1},
+  {sizeof vcom_string2, vcom_string2},
+  {sizeof vcom_string3, vcom_string3}
+};
+
+/*
+ * Handles the GET_DESCRIPTOR callback. All required descriptors must be
+ * handled here.
+ */
+static const USBDescriptor *get_descriptor(USBDriver *usbp,
+                                           uint8_t dtype,
+                                           uint8_t dindex,
+                                           uint16_t lang) {
+
+  (void)usbp;
+  (void)lang;
+  switch (dtype) {
+  case USB_DESCRIPTOR_DEVICE:
+    return &vcom_device_descriptor;
+  case USB_DESCRIPTOR_CONFIGURATION:
+    return &vcom_configuration_descriptor;
+  case USB_DESCRIPTOR_STRING:
+    if (dindex < 4)
+      return &vcom_strings[dindex];
+  }
+  return NULL;
+}
+
+/**
+ * @brief   IN EP1 state.
+ */
+static USBInEndpointState ep1instate;
+
+/**
+ * @brief   OUT EP1 state.
+ */
+static USBOutEndpointState ep1outstate;
+
+/**
+ * @brief   EP1 initialization structure (both IN and OUT).
+ */
+static const USBEndpointConfig ep1config = {
+  USB_EP_MODE_TYPE_BULK,
+  NULL,
+  sduDataTransmitted,
+  sduDataReceived,
+  0x0040,
+  0x0040,
+  &ep1instate,
+  &ep1outstate,
+  2,
+  NULL
+};
+
+/**
+ * @brief   IN EP2 state.
+ */
+static USBInEndpointState ep2instate;
+
+/**
+ * @brief   EP2 initialization structure (IN only).
+ */
+static const USBEndpointConfig ep2config = {
+  USB_EP_MODE_TYPE_INTR,
+  NULL,
+  sduInterruptTransmitted,
+  NULL,
+  0x0010,
+  0x0000,
+  &ep2instate,
+  NULL,
+  1,
+  NULL
+};
+
+/*
+ * Handles the USB driver global events.
+ */
+static void usb_event(USBDriver *usbp, usbevent_t event) {
+  extern SerialUSBDriver SDU1;
+
+  switch (event) {
+  case USB_EVENT_RESET:
+    return;
+  case USB_EVENT_ADDRESS:
+    return;
+  case USB_EVENT_CONFIGURED:
+    chSysLockFromISR();
+
+    /* Enables the endpoints specified into the configuration.
+       Note, this callback is invoked from an ISR so I-Class functions
+       must be used.*/
+    usbInitEndpointI(usbp, USBD2_DATA_REQUEST_EP, &ep1config);
+    usbInitEndpointI(usbp, USBD2_INTERRUPT_REQUEST_EP, &ep2config);
+
+    /* Resetting the state of the CDC subsystem.*/
+    sduConfigureHookI(&SDU1);
+
+    chSysUnlockFromISR();
+    return;
+  case USB_EVENT_UNCONFIGURED:
+    return;
+  case USB_EVENT_SUSPEND:
+    chSysLockFromISR();
+
+    /* Disconnection event on suspend.*/
+    sduDisconnectI(&SDU1);
+
+    chSysUnlockFromISR();
+    return;
+  case USB_EVENT_WAKEUP:
+    return;
+  case USB_EVENT_STALLED:
+    return;
+  }
+  return;
+}
+
+/*
+ * Handles the USB driver global events.
+ */
+static void sof_handler(USBDriver *usbp) {
+
+  (void)usbp;
+
+  osalSysLockFromISR();
+  sduSOFHookI(&SDU1);
+  osalSysUnlockFromISR();
+}
+
+/*
+ * USB driver configuration.
+ */
+const USBConfig usbcfg = {
+  usb_event,
+  get_descriptor,
+  sduRequestsHook,
+  sof_handler
+};
+
+/*
+ * Serial over USB driver configuration.
+ */
+const SerialUSBConfig serusbcfg = {
+  &USBD2,
+  USBD2_DATA_REQUEST_EP,
+  USBD2_DATA_AVAILABLE_EP,
+  USBD2_INTERRUPT_REQUEST_EP
+};
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/usbcfg.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/usbcfg.h
new file mode 100644
index 0000000..2da1c40
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F429-DISCOVERY/usbcfg.h
@@ -0,0 +1,26 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _USBCFG_H_
+#define _USBCFG_H_
+
+extern const USBConfig usbcfg;
+extern SerialUSBConfig serusbcfg;
+extern SerialUSBDriver SDU1;
+
+#endif  /* _USBCFG_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/.cproject
new file mode 100644
index 0000000..9d83d50
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/.cproject
@@ -0,0 +1,62 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.1570569554">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1570569554" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.1570569554" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.1570569554." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.2051275125" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform binaryParser="org.eclipse.cdt.core.ELF" id="org.eclipse.cdt.build.core.prefbase.toolchain.2051275125.1235631892" name=""/>
+							<builder id="org.eclipse.cdt.build.core.settings.default.builder.681215945" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1913618182" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1359024970" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.648690541" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths"/>
+								<option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.1530801237" name="Undefined Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.865562104" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.321395526" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.76286563" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths"/>
+								<option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.1772031118" name="Undefined Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1168908150" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1390938668" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<option id="org.eclipse.cdt.build.core.settings.holder.incpaths.684710851" name="Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.incpaths"/>
+								<option id="org.eclipse.cdt.build.core.settings.holder.undef.incpaths.1457542840" name="Undefined Include Paths" superClass="org.eclipse.cdt.build.core.settings.holder.undef.incpaths"/>
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.645908401" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB.null.100047313" name="RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.1570569554">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/.project
new file mode 100644
index 0000000..7a99f8c
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/.project
@@ -0,0 +1,106 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value>-j1</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>true</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+		<nature>org.eclipse.cdt.core.ccnature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32F746G_DISCOVERY</locationURI>
+		</link>
+		<link>
+			<name>fatfs</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/ext/fatfs</locationURI>
+		</link>
+		<link>
+			<name>lwip</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/ext/lwip</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/Makefile
new file mode 100644
index 0000000..d3365d7
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/Makefile
@@ -0,0 +1,225 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f7xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F7xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F746G_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+include $(CHIBIOS)/os/various/lwip_bindings/lwip.mk
+include $(CHIBIOS)/os/various/fatfs_bindings/fatfs.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F746xG.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       $(LWSRC) \
+       $(FATFSSRC) \
+       $(CHIBIOS)/os/various/evtimer.c \
+       $(CHIBIOS)/os/hal/lib/streams/memstreams.c \
+       $(CHIBIOS)/os/hal/lib/streams/chprintf.c \
+       $(CHIBIOS)/os/various/shell.c \
+       web/web.c usbcfg.c main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(LWINC) $(FATFSINC) \
+         $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/chconf.h
new file mode 100644
index 0000000..1646c0e
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/chconf.h
@@ -0,0 +1,501 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   TRUE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           TRUE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                TRUE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               TRUE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 TRUE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           TRUE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 TRUE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#define CORTEX_VTOR_INIT                    0x00200000U
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/debug/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/debug/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..4902172
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/debug/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList&gt;&lt;content id=&quot;xPSR-(format)&quot; val=&quot;4&quot;/&gt;&lt;/contentList&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1570569554"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/debug/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB (OpenOCD, Just Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/debug/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB (OpenOCD, Just Run).launch
new file mode 100644
index 0000000..e844484
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/debug/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB (OpenOCD, Just Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList&gt;&lt;content id=&quot;xPSR-(format)&quot; val=&quot;4&quot;/&gt;&lt;/contentList&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1570569554"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/ffconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/ffconf.h
new file mode 100644
index 0000000..2af5efe
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/ffconf.h
@@ -0,0 +1,230 @@
+/* CHIBIOS FIX */
+#include "ch.h"
+
+/*---------------------------------------------------------------------------/
+/  FatFs - FAT file system module configuration file  R0.10b (C)ChaN, 2014
+/---------------------------------------------------------------------------*/
+
+#ifndef _FFCONF
+#define _FFCONF 8051    /* Revision ID */
+
+
+/*---------------------------------------------------------------------------/
+/ Functions and Buffer Configurations
+/---------------------------------------------------------------------------*/
+
+#define _FS_TINY        0   /* 0:Normal or 1:Tiny */
+/* When _FS_TINY is set to 1, it reduces memory consumption _MAX_SS bytes each
+/  file object. For file data transfer, FatFs uses the common sector buffer in
+/  the file system object (FATFS) instead of private sector buffer eliminated
+/  from the file object (FIL). */
+
+
+#define _FS_READONLY    0   /* 0:Read/Write or 1:Read only */
+/* Setting _FS_READONLY to 1 defines read only configuration. This removes
+/  writing functions, f_write(), f_sync(), f_unlink(), f_mkdir(), f_chmod(),
+/  f_rename(), f_truncate() and useless f_getfree(). */
+
+
+#define _FS_MINIMIZE    0   /* 0 to 3 */
+/* The _FS_MINIMIZE option defines minimization level to remove API functions.
+/
+/   0: All basic functions are enabled.
+/   1: f_stat(), f_getfree(), f_unlink(), f_mkdir(), f_chmod(), f_utime(),
+/      f_truncate() and f_rename() function are removed.
+/   2: f_opendir(), f_readdir() and f_closedir() are removed in addition to 1.
+/   3: f_lseek() function is removed in addition to 2. */
+
+
+#define _USE_STRFUNC    0   /* 0:Disable or 1-2:Enable */
+/* To enable string functions, set _USE_STRFUNC to 1 or 2. */
+
+
+#define _USE_MKFS       0   /* 0:Disable or 1:Enable */
+/* To enable f_mkfs() function, set _USE_MKFS to 1 and set _FS_READONLY to 0 */
+
+
+#define _USE_FASTSEEK   0   /* 0:Disable or 1:Enable */
+/* To enable fast seek feature, set _USE_FASTSEEK to 1. */
+
+
+#define _USE_LABEL      0   /* 0:Disable or 1:Enable */
+/* To enable volume label functions, set _USE_LAVEL to 1 */
+
+
+#define _USE_FORWARD    0   /* 0:Disable or 1:Enable */
+/* To enable f_forward() function, set _USE_FORWARD to 1 and set _FS_TINY to 1. */
+
+
+/*---------------------------------------------------------------------------/
+/ Locale and Namespace Configurations
+/---------------------------------------------------------------------------*/
+
+#define _CODE_PAGE  1252
+/* The _CODE_PAGE specifies the OEM code page to be used on the target system.
+/  Incorrect setting of the code page can cause a file open failure.
+/
+/   932  - Japanese Shift_JIS (DBCS, OEM, Windows)
+/   936  - Simplified Chinese GBK (DBCS, OEM, Windows)
+/   949  - Korean (DBCS, OEM, Windows)
+/   950  - Traditional Chinese Big5 (DBCS, OEM, Windows)
+/   1250 - Central Europe (Windows)
+/   1251 - Cyrillic (Windows)
+/   1252 - Latin 1 (Windows)
+/   1253 - Greek (Windows)
+/   1254 - Turkish (Windows)
+/   1255 - Hebrew (Windows)
+/   1256 - Arabic (Windows)
+/   1257 - Baltic (Windows)
+/   1258 - Vietnam (OEM, Windows)
+/   437  - U.S. (OEM)
+/   720  - Arabic (OEM)
+/   737  - Greek (OEM)
+/   775  - Baltic (OEM)
+/   850  - Multilingual Latin 1 (OEM)
+/   858  - Multilingual Latin 1 + Euro (OEM)
+/   852  - Latin 2 (OEM)
+/   855  - Cyrillic (OEM)
+/   866  - Russian (OEM)
+/   857  - Turkish (OEM)
+/   862  - Hebrew (OEM)
+/   874  - Thai (OEM, Windows)
+/   1    - ASCII (Valid for only non-LFN configuration) */
+
+
+#define _USE_LFN    3       /* 0 to 3 */
+#define _MAX_LFN    255     /* Maximum LFN length to handle (12 to 255) */
+/* The _USE_LFN option switches the LFN feature.
+/
+/   0: Disable LFN feature. _MAX_LFN has no effect.
+/   1: Enable LFN with static working buffer on the BSS. Always NOT thread-safe.
+/   2: Enable LFN with dynamic working buffer on the STACK.
+/   3: Enable LFN with dynamic working buffer on the HEAP.
+/
+/  When enable LFN feature, Unicode handling functions ff_convert() and ff_wtoupper()
+/  function must be added to the project.
+/  The LFN working buffer occupies (_MAX_LFN + 1) * 2 bytes. When use stack for the
+/  working buffer, take care on stack overflow. When use heap memory for the working
+/  buffer, memory management functions, ff_memalloc() and ff_memfree(), must be added
+/  to the project. */
+
+
+#define _LFN_UNICODE    0   /* 0:ANSI/OEM or 1:Unicode */
+/* To switch the character encoding on the FatFs API (TCHAR) to Unicode, enable LFN
+/  feature and set _LFN_UNICODE to 1. This option affects behavior of string I/O
+/  functions. This option must be 0 when LFN feature is not enabled. */
+
+
+#define _STRF_ENCODE    3   /* 0:ANSI/OEM, 1:UTF-16LE, 2:UTF-16BE, 3:UTF-8 */
+/* When Unicode API is enabled by _LFN_UNICODE option, this option selects the character
+/  encoding on the file to be read/written via string I/O functions, f_gets(), f_putc(),
+/  f_puts and f_printf(). This option has no effect when Unicode API is not enabled. */
+
+
+#define _FS_RPATH       0   /* 0 to 2 */
+/* The _FS_RPATH option configures relative path feature.
+/
+/   0: Disable relative path feature and remove related functions.
+/   1: Enable relative path. f_chdrive() and f_chdir() function are available.
+/   2: f_getcwd() function is available in addition to 1.
+/
+/  Note that output of the f_readdir() fnction is affected by this option. */
+
+
+/*---------------------------------------------------------------------------/
+/ Drive/Volume Configurations
+/---------------------------------------------------------------------------*/
+
+#define _VOLUMES    1
+/* Number of volumes (logical drives) to be used. */
+
+
+#define _STR_VOLUME_ID  0   /* 0:Use only 0-9 for drive ID, 1:Use strings for drive ID */
+#define _VOLUME_STRS    "RAM","NAND","CF","SD1","SD2","USB1","USB2","USB3"
+/* When _STR_VOLUME_ID is set to 1, also pre-defined strings can be used as drive
+/  number in the path name. _VOLUME_STRS defines the drive ID strings for each logical
+/  drives. Number of items must be equal to _VOLUMES. Valid characters for the drive ID
+/  strings are: 0-9 and A-Z. */
+
+
+#define _MULTI_PARTITION    0   /* 0:Single partition, 1:Enable multiple partition */
+/* By default(0), each logical drive number is bound to the same physical drive number
+/  and only a FAT volume found on the physical drive is mounted. When it is set to 1,
+/  each logical drive number is bound to arbitrary drive/partition listed in VolToPart[].
+*/
+
+
+#define _MIN_SS     512
+#define _MAX_SS     512
+/* These options configure the range of sector size to be supported. (512, 1024, 2048 or
+/  4096) Always set both 512 for most systems, all memory card and harddisk. But a larger
+/  value may be required for on-board flash memory and some type of optical media.
+/  When _MAX_SS is larger than _MIN_SS, FatFs is configured to variable sector size and
+/  GET_SECTOR_SIZE command must be implemented to the disk_ioctl() function. */
+
+
+#define _USE_ERASE  0   /* 0:Disable or 1:Enable */
+/* To enable sector erase feature, set _USE_ERASE to 1. Also CTRL_ERASE_SECTOR command
+/  should be added to the disk_ioctl() function. */
+
+
+#define _FS_NOFSINFO    0   /* 0 to 3 */
+/* If you need to know correct free space on the FAT32 volume, set bit 0 of this option
+/  and f_getfree() function at first time after volume mount will force a full FAT scan.
+/  Bit 1 controls the last allocated cluster number as bit 0.
+/
+/  bit0=0: Use free cluster count in the FSINFO if available.
+/  bit0=1: Do not trust free cluster count in the FSINFO.
+/  bit1=0: Use last allocated cluster number in the FSINFO if available.
+/  bit1=1: Do not trust last allocated cluster number in the FSINFO.
+*/
+
+
+
+/*---------------------------------------------------------------------------/
+/ System Configurations
+/---------------------------------------------------------------------------*/
+
+#define _FS_LOCK    0   /* 0:Disable or >=1:Enable */
+/* To enable file lock control feature, set _FS_LOCK to non-zero value.
+/  The value defines how many files/sub-directories can be opened simultaneously
+/  with file lock control. This feature uses bss _FS_LOCK * 12 bytes. */
+
+
+#define _FS_REENTRANT   0               /* 0:Disable or 1:Enable */
+#define _FS_TIMEOUT     MS2ST(1000)     /* Timeout period in unit of time tick */
+#define _SYNC_t         semaphore_t*    /* O/S dependent sync object type. e.g. HANDLE, OS_EVENT*, ID, SemaphoreHandle_t and etc.. */
+/* The _FS_REENTRANT option switches the re-entrancy (thread safe) of the FatFs module.
+/
+/   0: Disable re-entrancy. _FS_TIMEOUT and _SYNC_t have no effect.
+/   1: Enable re-entrancy. Also user provided synchronization handlers,
+/      ff_req_grant(), ff_rel_grant(), ff_del_syncobj() and ff_cre_syncobj()
+/      function must be added to the project.
+*/
+
+
+#define _WORD_ACCESS    0   /* 0 or 1 */
+/* The _WORD_ACCESS option is an only platform dependent option. It defines
+/  which access method is used to the word data on the FAT volume.
+/
+/   0: Byte-by-byte access. Always compatible with all platforms.
+/   1: Word access. Do not choose this unless under both the following conditions.
+/
+/  * Address misaligned memory access is always allowed for ALL instructions.
+/  * Byte order on the memory is little-endian.
+/
+/  If it is the case, _WORD_ACCESS can also be set to 1 to improve performance and
+/  reduce code size. Following table shows an example of some processor types.
+/
+/   ARM7TDMI    0           ColdFire    0           V850E2      0
+/   Cortex-M3   0           Z80         0/1         V850ES      0/1
+/   Cortex-M0   0           RX600(LE)   0/1         TLCS-870    0/1
+/   AVR         0/1         RX600(BE)   0           TLCS-900    0/1
+/   AVR32       0           RL78        0           R32C        0
+/   PIC18       0/1         SH-2        0           M16C        0/1
+/   PIC24       0           H8S         0           MSP430      0
+/   PIC32       0           H8/300H     0           x86         0/1
+*/
+
+
+#endif /* _FFCONF */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/halconf.h
new file mode 100644
index 0000000..b38c9cd
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/halconf.h
@@ -0,0 +1,388 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM                  TRUE
+#endif
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 TRUE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          TRUE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 TRUE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/lwipopts.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/lwipopts.h
new file mode 100644
index 0000000..5a8e519
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/lwipopts.h
@@ -0,0 +1,2127 @@
+/**
+ * @file
+ *
+ * lwIP Options Configuration
+ */
+
+/*
+ * Copyright (c) 2001-2004 Swedish Institute of Computer Science.
+ * All rights reserved. 
+ * 
+ * Redistribution and use in source and binary forms, with or without modification, 
+ * are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission. 
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT 
+ * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT 
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING 
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 
+ * OF SUCH DAMAGE.
+ *
+ * This file is part of the lwIP TCP/IP stack.
+ * 
+ * Author: Adam Dunkels <adam@sics.se>
+ *
+ */
+#ifndef __LWIPOPT_H__
+#define __LWIPOPT_H__
+
+
+/*
+   -----------------------------------------------
+   ---------- Platform specific locking ----------
+   -----------------------------------------------
+*/
+
+/**
+ * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain
+ * critical regions during buffer allocation, deallocation and memory
+ * allocation and deallocation.
+ */
+#ifndef SYS_LIGHTWEIGHT_PROT
+#define SYS_LIGHTWEIGHT_PROT            0
+#endif
+
+/** 
+ * NO_SYS==1: Provides VERY minimal functionality. Otherwise,
+ * use lwIP facilities.
+ */
+#ifndef NO_SYS
+#define NO_SYS                          0
+#endif
+
+/**
+ * NO_SYS_NO_TIMERS==1: Drop support for sys_timeout when NO_SYS==1
+ * Mainly for compatibility to old versions.
+ */
+#ifndef NO_SYS_NO_TIMERS
+#define NO_SYS_NO_TIMERS                0
+#endif
+
+/**
+ * MEMCPY: override this if you have a faster implementation at hand than the
+ * one included in your C library
+ */
+#ifndef MEMCPY
+#define MEMCPY(dst,src,len)             memcpy(dst,src,len)
+#endif
+
+/**
+ * SMEMCPY: override this with care! Some compilers (e.g. gcc) can inline a
+ * call to memcpy() if the length is known at compile time and is small.
+ */
+#ifndef SMEMCPY
+#define SMEMCPY(dst,src,len)            memcpy(dst,src,len)
+#endif
+
+/*
+   ------------------------------------
+   ---------- Memory options ----------
+   ------------------------------------
+*/
+/**
+ * MEM_LIBC_MALLOC==1: Use malloc/free/realloc provided by your C-library
+ * instead of the lwip internal allocator. Can save code size if you
+ * already use it.
+ */
+#ifndef MEM_LIBC_MALLOC
+#define MEM_LIBC_MALLOC                 0
+#endif
+
+/**
+* MEMP_MEM_MALLOC==1: Use mem_malloc/mem_free instead of the lwip pool allocator.
+* Especially useful with MEM_LIBC_MALLOC but handle with care regarding execution
+* speed and usage from interrupts!
+*/
+#ifndef MEMP_MEM_MALLOC
+#define MEMP_MEM_MALLOC                 0
+#endif
+
+/**
+ * MEM_ALIGNMENT: should be set to the alignment of the CPU
+ *    4 byte alignment -> #define MEM_ALIGNMENT 4
+ *    2 byte alignment -> #define MEM_ALIGNMENT 2
+ */
+#ifndef MEM_ALIGNMENT
+#define MEM_ALIGNMENT                   4
+#endif
+
+/**
+ * MEM_SIZE: the size of the heap memory. If the application will send
+ * a lot of data that needs to be copied, this should be set high.
+ */
+#ifndef MEM_SIZE
+#define MEM_SIZE                        1600
+#endif
+
+/**
+ * MEMP_SEPARATE_POOLS: if defined to 1, each pool is placed in its own array.
+ * This can be used to individually change the location of each pool.
+ * Default is one big array for all pools
+ */
+#ifndef MEMP_SEPARATE_POOLS
+#define MEMP_SEPARATE_POOLS             0
+#endif
+
+/**
+ * MEMP_OVERFLOW_CHECK: memp overflow protection reserves a configurable
+ * amount of bytes before and after each memp element in every pool and fills
+ * it with a prominent default value.
+ *    MEMP_OVERFLOW_CHECK == 0 no checking
+ *    MEMP_OVERFLOW_CHECK == 1 checks each element when it is freed
+ *    MEMP_OVERFLOW_CHECK >= 2 checks each element in every pool every time
+ *      memp_malloc() or memp_free() is called (useful but slow!)
+ */
+#ifndef MEMP_OVERFLOW_CHECK
+#define MEMP_OVERFLOW_CHECK             0
+#endif
+
+/**
+ * MEMP_SANITY_CHECK==1: run a sanity check after each memp_free() to make
+ * sure that there are no cycles in the linked lists.
+ */
+#ifndef MEMP_SANITY_CHECK
+#define MEMP_SANITY_CHECK               0
+#endif
+
+/**
+ * MEM_USE_POOLS==1: Use an alternative to malloc() by allocating from a set
+ * of memory pools of various sizes. When mem_malloc is called, an element of
+ * the smallest pool that can provide the length needed is returned.
+ * To use this, MEMP_USE_CUSTOM_POOLS also has to be enabled.
+ */
+#ifndef MEM_USE_POOLS
+#define MEM_USE_POOLS                   0
+#endif
+
+/**
+ * MEM_USE_POOLS_TRY_BIGGER_POOL==1: if one malloc-pool is empty, try the next
+ * bigger pool - WARNING: THIS MIGHT WASTE MEMORY but it can make a system more
+ * reliable. */
+#ifndef MEM_USE_POOLS_TRY_BIGGER_POOL
+#define MEM_USE_POOLS_TRY_BIGGER_POOL   0
+#endif
+
+/**
+ * MEMP_USE_CUSTOM_POOLS==1: whether to include a user file lwippools.h
+ * that defines additional pools beyond the "standard" ones required
+ * by lwIP. If you set this to 1, you must have lwippools.h in your 
+ * inlude path somewhere. 
+ */
+#ifndef MEMP_USE_CUSTOM_POOLS
+#define MEMP_USE_CUSTOM_POOLS           0
+#endif
+
+/**
+ * Set this to 1 if you want to free PBUF_RAM pbufs (or call mem_free()) from
+ * interrupt context (or another context that doesn't allow waiting for a
+ * semaphore).
+ * If set to 1, mem_malloc will be protected by a semaphore and SYS_ARCH_PROTECT,
+ * while mem_free will only use SYS_ARCH_PROTECT. mem_malloc SYS_ARCH_UNPROTECTs
+ * with each loop so that mem_free can run.
+ *
+ * ATTENTION: As you can see from the above description, this leads to dis-/
+ * enabling interrupts often, which can be slow! Also, on low memory, mem_malloc
+ * can need longer.
+ *
+ * If you don't want that, at least for NO_SYS=0, you can still use the following
+ * functions to enqueue a deallocation call which then runs in the tcpip_thread
+ * context:
+ * - pbuf_free_callback(p);
+ * - mem_free_callback(m);
+ */
+#ifndef LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT
+#define LWIP_ALLOW_MEM_FREE_FROM_OTHER_CONTEXT 0
+#endif
+
+/*
+   ------------------------------------------------
+   ---------- Internal Memory Pool Sizes ----------
+   ------------------------------------------------
+*/
+/**
+ * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF).
+ * If the application sends a lot of data out of ROM (or other static memory),
+ * this should be set high.
+ */
+#ifndef MEMP_NUM_PBUF
+#define MEMP_NUM_PBUF                   16
+#endif
+
+/**
+ * MEMP_NUM_RAW_PCB: Number of raw connection PCBs
+ * (requires the LWIP_RAW option)
+ */
+#ifndef MEMP_NUM_RAW_PCB
+#define MEMP_NUM_RAW_PCB                4
+#endif
+
+/**
+ * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One
+ * per active UDP "connection".
+ * (requires the LWIP_UDP option)
+ */
+#ifndef MEMP_NUM_UDP_PCB
+#define MEMP_NUM_UDP_PCB                4
+#endif
+
+/**
+ * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections.
+ * (requires the LWIP_TCP option)
+ */
+#ifndef MEMP_NUM_TCP_PCB
+#define MEMP_NUM_TCP_PCB                5
+#endif
+
+/**
+ * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections.
+ * (requires the LWIP_TCP option)
+ */
+#ifndef MEMP_NUM_TCP_PCB_LISTEN
+#define MEMP_NUM_TCP_PCB_LISTEN         8
+#endif
+
+/**
+ * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments.
+ * (requires the LWIP_TCP option)
+ */
+#ifndef MEMP_NUM_TCP_SEG
+#define MEMP_NUM_TCP_SEG                16
+#endif
+
+/**
+ * MEMP_NUM_REASSDATA: the number of IP packets simultaneously queued for
+ * reassembly (whole packets, not fragments!)
+ */
+#ifndef MEMP_NUM_REASSDATA
+#define MEMP_NUM_REASSDATA              5
+#endif
+
+/**
+ * MEMP_NUM_FRAG_PBUF: the number of IP fragments simultaneously sent
+ * (fragments, not whole packets!).
+ * This is only used with IP_FRAG_USES_STATIC_BUF==0 and
+ * LWIP_NETIF_TX_SINGLE_PBUF==0 and only has to be > 1 with DMA-enabled MACs
+ * where the packet is not yet sent when netif->output returns.
+ */
+#ifndef MEMP_NUM_FRAG_PBUF
+#define MEMP_NUM_FRAG_PBUF              15
+#endif
+
+/**
+ * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing
+ * packets (pbufs) that are waiting for an ARP request (to resolve
+ * their destination address) to finish.
+ * (requires the ARP_QUEUEING option)
+ */
+#ifndef MEMP_NUM_ARP_QUEUE
+#define MEMP_NUM_ARP_QUEUE              30
+#endif
+
+/**
+ * MEMP_NUM_IGMP_GROUP: The number of multicast groups whose network interfaces
+ * can be members et the same time (one per netif - allsystems group -, plus one
+ * per netif membership).
+ * (requires the LWIP_IGMP option)
+ */
+#ifndef MEMP_NUM_IGMP_GROUP
+#define MEMP_NUM_IGMP_GROUP             8
+#endif
+
+/**
+ * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts.
+ * (requires NO_SYS==0)
+ * The default number of timeouts is calculated here for all enabled modules.
+ * The formula expects settings to be either '0' or '1'.
+ */
+#ifndef MEMP_NUM_SYS_TIMEOUT
+#define MEMP_NUM_SYS_TIMEOUT            (LWIP_TCP + IP_REASSEMBLY + LWIP_ARP + (2*LWIP_DHCP) + LWIP_AUTOIP + LWIP_IGMP + LWIP_DNS + PPP_SUPPORT)
+#endif
+
+/**
+ * MEMP_NUM_NETBUF: the number of struct netbufs.
+ * (only needed if you use the sequential API, like api_lib.c)
+ */
+#ifndef MEMP_NUM_NETBUF
+#define MEMP_NUM_NETBUF                 2
+#endif
+
+/**
+ * MEMP_NUM_NETCONN: the number of struct netconns.
+ * (only needed if you use the sequential API, like api_lib.c)
+ */
+#ifndef MEMP_NUM_NETCONN
+#define MEMP_NUM_NETCONN                4
+#endif
+
+/**
+ * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used
+ * for callback/timeout API communication. 
+ * (only needed if you use tcpip.c)
+ */
+#ifndef MEMP_NUM_TCPIP_MSG_API
+#define MEMP_NUM_TCPIP_MSG_API          8
+#endif
+
+/**
+ * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used
+ * for incoming packets. 
+ * (only needed if you use tcpip.c)
+ */
+#ifndef MEMP_NUM_TCPIP_MSG_INPKT
+#define MEMP_NUM_TCPIP_MSG_INPKT        8
+#endif
+
+/**
+ * MEMP_NUM_SNMP_NODE: the number of leafs in the SNMP tree.
+ */
+#ifndef MEMP_NUM_SNMP_NODE
+#define MEMP_NUM_SNMP_NODE              50
+#endif
+
+/**
+ * MEMP_NUM_SNMP_ROOTNODE: the number of branches in the SNMP tree.
+ * Every branch has one leaf (MEMP_NUM_SNMP_NODE) at least!
+ */
+#ifndef MEMP_NUM_SNMP_ROOTNODE
+#define MEMP_NUM_SNMP_ROOTNODE          30
+#endif
+
+/**
+ * MEMP_NUM_SNMP_VARBIND: the number of concurrent requests (does not have to
+ * be changed normally) - 2 of these are used per request (1 for input,
+ * 1 for output)
+ */
+#ifndef MEMP_NUM_SNMP_VARBIND
+#define MEMP_NUM_SNMP_VARBIND           2
+#endif
+
+/**
+ * MEMP_NUM_SNMP_VALUE: the number of OID or values concurrently used
+ * (does not have to be changed normally) - 3 of these are used per request
+ * (1 for the value read and 2 for OIDs - input and output)
+ */
+#ifndef MEMP_NUM_SNMP_VALUE
+#define MEMP_NUM_SNMP_VALUE             3
+#endif
+
+/**
+ * MEMP_NUM_NETDB: the number of concurrently running lwip_addrinfo() calls
+ * (before freeing the corresponding memory using lwip_freeaddrinfo()).
+ */
+#ifndef MEMP_NUM_NETDB
+#define MEMP_NUM_NETDB                  1
+#endif
+
+/**
+ * MEMP_NUM_LOCALHOSTLIST: the number of host entries in the local host list
+ * if DNS_LOCAL_HOSTLIST_IS_DYNAMIC==1.
+ */
+#ifndef MEMP_NUM_LOCALHOSTLIST
+#define MEMP_NUM_LOCALHOSTLIST          1
+#endif
+
+/**
+ * MEMP_NUM_PPPOE_INTERFACES: the number of concurrently active PPPoE
+ * interfaces (only used with PPPOE_SUPPORT==1)
+ */
+#ifndef MEMP_NUM_PPPOE_INTERFACES
+#define MEMP_NUM_PPPOE_INTERFACES       1
+#endif
+
+/**
+ * PBUF_POOL_SIZE: the number of buffers in the pbuf pool. 
+ */
+#ifndef PBUF_POOL_SIZE
+#define PBUF_POOL_SIZE                  16
+#endif
+
+/*
+   ---------------------------------
+   ---------- ARP options ----------
+   ---------------------------------
+*/
+/**
+ * LWIP_ARP==1: Enable ARP functionality.
+ */
+#ifndef LWIP_ARP
+#define LWIP_ARP                        1
+#endif
+
+/**
+ * ARP_TABLE_SIZE: Number of active MAC-IP address pairs cached.
+ */
+#ifndef ARP_TABLE_SIZE
+#define ARP_TABLE_SIZE                  10
+#endif
+
+/**
+ * ARP_QUEUEING==1: Multiple outgoing packets are queued during hardware address
+ * resolution. By default, only the most recent packet is queued per IP address.
+ * This is sufficient for most protocols and mainly reduces TCP connection
+ * startup time. Set this to 1 if you know your application sends more than one
+ * packet in a row to an IP address that is not in the ARP cache.
+ */
+#ifndef ARP_QUEUEING
+#define ARP_QUEUEING                    0
+#endif
+
+/**
+ * ETHARP_TRUST_IP_MAC==1: Incoming IP packets cause the ARP table to be
+ * updated with the source MAC and IP addresses supplied in the packet.
+ * You may want to disable this if you do not trust LAN peers to have the
+ * correct addresses, or as a limited approach to attempt to handle
+ * spoofing. If disabled, lwIP will need to make a new ARP request if
+ * the peer is not already in the ARP table, adding a little latency.
+ * The peer *is* in the ARP table if it requested our address before.
+ * Also notice that this slows down input processing of every IP packet!
+ */
+#ifndef ETHARP_TRUST_IP_MAC
+#define ETHARP_TRUST_IP_MAC             0
+#endif
+
+/**
+ * ETHARP_SUPPORT_VLAN==1: support receiving ethernet packets with VLAN header.
+ * Additionally, you can define ETHARP_VLAN_CHECK to an u16_t VLAN ID to check.
+ * If ETHARP_VLAN_CHECK is defined, only VLAN-traffic for this VLAN is accepted.
+ * If ETHARP_VLAN_CHECK is not defined, all traffic is accepted.
+ * Alternatively, define a function/define ETHARP_VLAN_CHECK_FN(eth_hdr, vlan)
+ * that returns 1 to accept a packet or 0 to drop a packet.
+ */
+#ifndef ETHARP_SUPPORT_VLAN
+#define ETHARP_SUPPORT_VLAN             0
+#endif
+
+/** LWIP_ETHERNET==1: enable ethernet support for PPPoE even though ARP
+ * might be disabled
+ */
+#ifndef LWIP_ETHERNET
+#define LWIP_ETHERNET                   (LWIP_ARP || PPPOE_SUPPORT)
+#endif
+
+/** ETH_PAD_SIZE: number of bytes added before the ethernet header to ensure
+ * alignment of payload after that header. Since the header is 14 bytes long,
+ * without this padding e.g. addresses in the IP header will not be aligned
+ * on a 32-bit boundary, so setting this to 2 can speed up 32-bit-platforms.
+ */
+#ifndef ETH_PAD_SIZE
+#define ETH_PAD_SIZE                    0
+#endif
+
+/** ETHARP_SUPPORT_STATIC_ENTRIES==1: enable code to support static ARP table
+ * entries (using etharp_add_static_entry/etharp_remove_static_entry).
+ */
+#ifndef ETHARP_SUPPORT_STATIC_ENTRIES
+#define ETHARP_SUPPORT_STATIC_ENTRIES   0
+#endif
+
+
+/*
+   --------------------------------
+   ---------- IP options ----------
+   --------------------------------
+*/
+/**
+ * IP_FORWARD==1: Enables the ability to forward IP packets across network
+ * interfaces. If you are going to run lwIP on a device with only one network
+ * interface, define this to 0.
+ */
+#ifndef IP_FORWARD
+#define IP_FORWARD                      0
+#endif
+
+/**
+ * IP_OPTIONS_ALLOWED: Defines the behavior for IP options.
+ *      IP_OPTIONS_ALLOWED==0: All packets with IP options are dropped.
+ *      IP_OPTIONS_ALLOWED==1: IP options are allowed (but not parsed).
+ */
+#ifndef IP_OPTIONS_ALLOWED
+#define IP_OPTIONS_ALLOWED              1
+#endif
+
+/**
+ * IP_REASSEMBLY==1: Reassemble incoming fragmented IP packets. Note that
+ * this option does not affect outgoing packet sizes, which can be controlled
+ * via IP_FRAG.
+ */
+#ifndef IP_REASSEMBLY
+#define IP_REASSEMBLY                   1
+#endif
+
+/**
+ * IP_FRAG==1: Fragment outgoing IP packets if their size exceeds MTU. Note
+ * that this option does not affect incoming packet sizes, which can be
+ * controlled via IP_REASSEMBLY.
+ */
+#ifndef IP_FRAG
+#define IP_FRAG                         1
+#endif
+
+/**
+ * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally)
+ * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived
+ * in this time, the whole packet is discarded.
+ */
+#ifndef IP_REASS_MAXAGE
+#define IP_REASS_MAXAGE                 3
+#endif
+
+/**
+ * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled.
+ * Since the received pbufs are enqueued, be sure to configure
+ * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive
+ * packets even if the maximum amount of fragments is enqueued for reassembly!
+ */
+#ifndef IP_REASS_MAX_PBUFS
+#define IP_REASS_MAX_PBUFS              10
+#endif
+
+/**
+ * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP
+ * fragmentation. Otherwise pbufs are allocated and reference the original
+ * packet data to be fragmented (or with LWIP_NETIF_TX_SINGLE_PBUF==1,
+ * new PBUF_RAM pbufs are used for fragments).
+ * ATTENTION: IP_FRAG_USES_STATIC_BUF==1 may not be used for DMA-enabled MACs!
+ */
+#ifndef IP_FRAG_USES_STATIC_BUF
+#define IP_FRAG_USES_STATIC_BUF         0
+#endif
+
+/**
+ * IP_FRAG_MAX_MTU: Assumed max MTU on any interface for IP frag buffer
+ * (requires IP_FRAG_USES_STATIC_BUF==1)
+ */
+#if IP_FRAG_USES_STATIC_BUF && !defined(IP_FRAG_MAX_MTU)
+#define IP_FRAG_MAX_MTU                 1500
+#endif
+
+/**
+ * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers.
+ */
+#ifndef IP_DEFAULT_TTL
+#define IP_DEFAULT_TTL                  255
+#endif
+
+/**
+ * IP_SOF_BROADCAST=1: Use the SOF_BROADCAST field to enable broadcast
+ * filter per pcb on udp and raw send operations. To enable broadcast filter
+ * on recv operations, you also have to set IP_SOF_BROADCAST_RECV=1.
+ */
+#ifndef IP_SOF_BROADCAST
+#define IP_SOF_BROADCAST                0
+#endif
+
+/**
+ * IP_SOF_BROADCAST_RECV (requires IP_SOF_BROADCAST=1) enable the broadcast
+ * filter on recv operations.
+ */
+#ifndef IP_SOF_BROADCAST_RECV
+#define IP_SOF_BROADCAST_RECV           0
+#endif
+
+/**
+ * IP_FORWARD_ALLOW_TX_ON_RX_NETIF==1: allow ip_forward() to send packets back
+ * out on the netif where it was received. This should only be used for
+ * wireless networks.
+ * ATTENTION: When this is 1, make sure your netif driver correctly marks incoming
+ * link-layer-broadcast/multicast packets as such using the corresponding pbuf flags!
+ */
+#ifndef IP_FORWARD_ALLOW_TX_ON_RX_NETIF
+#define IP_FORWARD_ALLOW_TX_ON_RX_NETIF 0
+#endif
+
+/**
+ * LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS==1: randomize the local port for the first
+ * local TCP/UDP pcb (default==0). This can prevent creating predictable port
+ * numbers after booting a device.
+ */
+#ifndef LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS
+#define LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS 0
+#endif
+
+/*
+   ----------------------------------
+   ---------- ICMP options ----------
+   ----------------------------------
+*/
+/**
+ * LWIP_ICMP==1: Enable ICMP module inside the IP stack.
+ * Be careful, disable that make your product non-compliant to RFC1122
+ */
+#ifndef LWIP_ICMP
+#define LWIP_ICMP                       1
+#endif
+
+/**
+ * ICMP_TTL: Default value for Time-To-Live used by ICMP packets.
+ */
+#ifndef ICMP_TTL
+#define ICMP_TTL                       (IP_DEFAULT_TTL)
+#endif
+
+/**
+ * LWIP_BROADCAST_PING==1: respond to broadcast pings (default is unicast only)
+ */
+#ifndef LWIP_BROADCAST_PING
+#define LWIP_BROADCAST_PING             0
+#endif
+
+/**
+ * LWIP_MULTICAST_PING==1: respond to multicast pings (default is unicast only)
+ */
+#ifndef LWIP_MULTICAST_PING
+#define LWIP_MULTICAST_PING             0
+#endif
+
+/*
+   ---------------------------------
+   ---------- RAW options ----------
+   ---------------------------------
+*/
+/**
+ * LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
+ */
+#ifndef LWIP_RAW
+#define LWIP_RAW                        1
+#endif
+
+/**
+ * LWIP_RAW==1: Enable application layer to hook into the IP layer itself.
+ */
+#ifndef RAW_TTL
+#define RAW_TTL                        (IP_DEFAULT_TTL)
+#endif
+
+/*
+   ----------------------------------
+   ---------- DHCP options ----------
+   ----------------------------------
+*/
+/**
+ * LWIP_DHCP==1: Enable DHCP module.
+ */
+#ifndef LWIP_DHCP
+#define LWIP_DHCP                       0
+#endif
+
+/**
+ * DHCP_DOES_ARP_CHECK==1: Do an ARP check on the offered address.
+ */
+#ifndef DHCP_DOES_ARP_CHECK
+#define DHCP_DOES_ARP_CHECK             ((LWIP_DHCP) && (LWIP_ARP))
+#endif
+
+/*
+   ------------------------------------
+   ---------- AUTOIP options ----------
+   ------------------------------------
+*/
+/**
+ * LWIP_AUTOIP==1: Enable AUTOIP module.
+ */
+#ifndef LWIP_AUTOIP
+#define LWIP_AUTOIP                     0
+#endif
+
+/**
+ * LWIP_DHCP_AUTOIP_COOP==1: Allow DHCP and AUTOIP to be both enabled on
+ * the same interface at the same time.
+ */
+#ifndef LWIP_DHCP_AUTOIP_COOP
+#define LWIP_DHCP_AUTOIP_COOP           0
+#endif
+
+/**
+ * LWIP_DHCP_AUTOIP_COOP_TRIES: Set to the number of DHCP DISCOVER probes
+ * that should be sent before falling back on AUTOIP. This can be set
+ * as low as 1 to get an AutoIP address very quickly, but you should
+ * be prepared to handle a changing IP address when DHCP overrides
+ * AutoIP.
+ */
+#ifndef LWIP_DHCP_AUTOIP_COOP_TRIES
+#define LWIP_DHCP_AUTOIP_COOP_TRIES     9
+#endif
+
+/*
+   ----------------------------------
+   ---------- SNMP options ----------
+   ----------------------------------
+*/
+/**
+ * LWIP_SNMP==1: Turn on SNMP module. UDP must be available for SNMP
+ * transport.
+ */
+#ifndef LWIP_SNMP
+#define LWIP_SNMP                       0
+#endif
+
+/**
+ * SNMP_CONCURRENT_REQUESTS: Number of concurrent requests the module will
+ * allow. At least one request buffer is required.
+ * Does not have to be changed unless external MIBs answer request asynchronously
+ */
+#ifndef SNMP_CONCURRENT_REQUESTS
+#define SNMP_CONCURRENT_REQUESTS        1
+#endif
+
+/**
+ * SNMP_TRAP_DESTINATIONS: Number of trap destinations. At least one trap
+ * destination is required
+ */
+#ifndef SNMP_TRAP_DESTINATIONS
+#define SNMP_TRAP_DESTINATIONS          1
+#endif
+
+/**
+ * SNMP_PRIVATE_MIB: 
+ * When using a private MIB, you have to create a file 'private_mib.h' that contains
+ * a 'struct mib_array_node mib_private' which contains your MIB.
+ */
+#ifndef SNMP_PRIVATE_MIB
+#define SNMP_PRIVATE_MIB                0
+#endif
+
+/**
+ * Only allow SNMP write actions that are 'safe' (e.g. disabeling netifs is not
+ * a safe action and disabled when SNMP_SAFE_REQUESTS = 1).
+ * Unsafe requests are disabled by default!
+ */
+#ifndef SNMP_SAFE_REQUESTS
+#define SNMP_SAFE_REQUESTS              1
+#endif
+
+/**
+ * The maximum length of strings used. This affects the size of
+ * MEMP_SNMP_VALUE elements.
+ */
+#ifndef SNMP_MAX_OCTET_STRING_LEN
+#define SNMP_MAX_OCTET_STRING_LEN       127
+#endif
+
+/**
+ * The maximum depth of the SNMP tree.
+ * With private MIBs enabled, this depends on your MIB!
+ * This affects the size of MEMP_SNMP_VALUE elements.
+ */
+#ifndef SNMP_MAX_TREE_DEPTH
+#define SNMP_MAX_TREE_DEPTH             15
+#endif
+
+/**
+ * The size of the MEMP_SNMP_VALUE elements, normally calculated from
+ * SNMP_MAX_OCTET_STRING_LEN and SNMP_MAX_TREE_DEPTH.
+ */
+#ifndef SNMP_MAX_VALUE_SIZE
+#define SNMP_MAX_VALUE_SIZE             LWIP_MAX((SNMP_MAX_OCTET_STRING_LEN)+1, sizeof(s32_t)*(SNMP_MAX_TREE_DEPTH))
+#endif
+
+/*
+   ----------------------------------
+   ---------- IGMP options ----------
+   ----------------------------------
+*/
+/**
+ * LWIP_IGMP==1: Turn on IGMP module. 
+ */
+#ifndef LWIP_IGMP
+#define LWIP_IGMP                       0
+#endif
+
+/*
+   ----------------------------------
+   ---------- DNS options -----------
+   ----------------------------------
+*/
+/**
+ * LWIP_DNS==1: Turn on DNS module. UDP must be available for DNS
+ * transport.
+ */
+#ifndef LWIP_DNS
+#define LWIP_DNS                        0
+#endif
+
+/** DNS maximum number of entries to maintain locally. */
+#ifndef DNS_TABLE_SIZE
+#define DNS_TABLE_SIZE                  4
+#endif
+
+/** DNS maximum host name length supported in the name table. */
+#ifndef DNS_MAX_NAME_LENGTH
+#define DNS_MAX_NAME_LENGTH             256
+#endif
+
+/** The maximum of DNS servers */
+#ifndef DNS_MAX_SERVERS
+#define DNS_MAX_SERVERS                 2
+#endif
+
+/** DNS do a name checking between the query and the response. */
+#ifndef DNS_DOES_NAME_CHECK
+#define DNS_DOES_NAME_CHECK             1
+#endif
+
+/** DNS message max. size. Default value is RFC compliant. */
+#ifndef DNS_MSG_SIZE
+#define DNS_MSG_SIZE                    512
+#endif
+
+/** DNS_LOCAL_HOSTLIST: Implements a local host-to-address list. If enabled,
+ *  you have to define
+ *    #define DNS_LOCAL_HOSTLIST_INIT {{"host1", 0x123}, {"host2", 0x234}}
+ *  (an array of structs name/address, where address is an u32_t in network
+ *  byte order).
+ *
+ *  Instead, you can also use an external function:
+ *  #define DNS_LOOKUP_LOCAL_EXTERN(x) extern u32_t my_lookup_function(const char *name)
+ *  that returns the IP address or INADDR_NONE if not found.
+ */
+#ifndef DNS_LOCAL_HOSTLIST
+#define DNS_LOCAL_HOSTLIST              0
+#endif /* DNS_LOCAL_HOSTLIST */
+
+/** If this is turned on, the local host-list can be dynamically changed
+ *  at runtime. */
+#ifndef DNS_LOCAL_HOSTLIST_IS_DYNAMIC
+#define DNS_LOCAL_HOSTLIST_IS_DYNAMIC   0
+#endif /* DNS_LOCAL_HOSTLIST_IS_DYNAMIC */
+
+/*
+   ---------------------------------
+   ---------- UDP options ----------
+   ---------------------------------
+*/
+/**
+ * LWIP_UDP==1: Turn on UDP.
+ */
+#ifndef LWIP_UDP
+#define LWIP_UDP                        1
+#endif
+
+/**
+ * LWIP_UDPLITE==1: Turn on UDP-Lite. (Requires LWIP_UDP)
+ */
+#ifndef LWIP_UDPLITE
+#define LWIP_UDPLITE                    0
+#endif
+
+/**
+ * UDP_TTL: Default Time-To-Live value.
+ */
+#ifndef UDP_TTL
+#define UDP_TTL                         (IP_DEFAULT_TTL)
+#endif
+
+/**
+ * LWIP_NETBUF_RECVINFO==1: append destination addr and port to every netbuf.
+ */
+#ifndef LWIP_NETBUF_RECVINFO
+#define LWIP_NETBUF_RECVINFO            0
+#endif
+
+/*
+   ---------------------------------
+   ---------- TCP options ----------
+   ---------------------------------
+*/
+/**
+ * LWIP_TCP==1: Turn on TCP.
+ */
+#ifndef LWIP_TCP
+#define LWIP_TCP                        1
+#endif
+
+/**
+ * TCP_TTL: Default Time-To-Live value.
+ */
+#ifndef TCP_TTL
+#define TCP_TTL                         (IP_DEFAULT_TTL)
+#endif
+
+/**
+ * TCP_WND: The size of a TCP window.  This must be at least 
+ * (2 * TCP_MSS) for things to work well
+ */
+#ifndef TCP_WND
+#define TCP_WND                         (4 * TCP_MSS)
+#endif 
+
+/**
+ * TCP_MAXRTX: Maximum number of retransmissions of data segments.
+ */
+#ifndef TCP_MAXRTX
+#define TCP_MAXRTX                      12
+#endif
+
+/**
+ * TCP_SYNMAXRTX: Maximum number of retransmissions of SYN segments.
+ */
+#ifndef TCP_SYNMAXRTX
+#define TCP_SYNMAXRTX                   6
+#endif
+
+/**
+ * TCP_QUEUE_OOSEQ==1: TCP will queue segments that arrive out of order.
+ * Define to 0 if your device is low on memory.
+ */
+#ifndef TCP_QUEUE_OOSEQ
+#define TCP_QUEUE_OOSEQ                 (LWIP_TCP)
+#endif
+
+/**
+ * TCP_MSS: TCP Maximum segment size. (default is 536, a conservative default,
+ * you might want to increase this.)
+ * For the receive side, this MSS is advertised to the remote side
+ * when opening a connection. For the transmit size, this MSS sets
+ * an upper limit on the MSS advertised by the remote host.
+ */
+#ifndef TCP_MSS
+#define TCP_MSS                         536
+#endif
+
+/**
+ * TCP_CALCULATE_EFF_SEND_MSS: "The maximum size of a segment that TCP really
+ * sends, the 'effective send MSS,' MUST be the smaller of the send MSS (which
+ * reflects the available reassembly buffer size at the remote host) and the
+ * largest size permitted by the IP layer" (RFC 1122)
+ * Setting this to 1 enables code that checks TCP_MSS against the MTU of the
+ * netif used for a connection and limits the MSS if it would be too big otherwise.
+ */
+#ifndef TCP_CALCULATE_EFF_SEND_MSS
+#define TCP_CALCULATE_EFF_SEND_MSS      1
+#endif
+
+
+/**
+ * TCP_SND_BUF: TCP sender buffer space (bytes).
+ * To achieve good performance, this should be at least 2 * TCP_MSS.
+ */
+#ifndef TCP_SND_BUF
+#define TCP_SND_BUF                     (2 * TCP_MSS)
+#endif
+
+/**
+ * TCP_SND_QUEUELEN: TCP sender buffer space (pbufs). This must be at least
+ * as much as (2 * TCP_SND_BUF/TCP_MSS) for things to work.
+ */
+#ifndef TCP_SND_QUEUELEN
+#define TCP_SND_QUEUELEN                ((4 * (TCP_SND_BUF) + (TCP_MSS - 1))/(TCP_MSS))
+#endif
+
+/**
+ * TCP_SNDLOWAT: TCP writable space (bytes). This must be less than
+ * TCP_SND_BUF. It is the amount of space which must be available in the
+ * TCP snd_buf for select to return writable (combined with TCP_SNDQUEUELOWAT).
+ */
+#ifndef TCP_SNDLOWAT
+#define TCP_SNDLOWAT                    LWIP_MIN(LWIP_MAX(((TCP_SND_BUF)/2), (2 * TCP_MSS) + 1), (TCP_SND_BUF) - 1)
+#endif
+
+/**
+ * TCP_SNDQUEUELOWAT: TCP writable bufs (pbuf count). This must be less
+ * than TCP_SND_QUEUELEN. If the number of pbufs queued on a pcb drops below
+ * this number, select returns writable (combined with TCP_SNDLOWAT).
+ */
+#ifndef TCP_SNDQUEUELOWAT
+#define TCP_SNDQUEUELOWAT               LWIP_MAX(((TCP_SND_QUEUELEN)/2), 5)
+#endif
+
+/**
+ * TCP_OOSEQ_MAX_BYTES: The maximum number of bytes queued on ooseq per pcb.
+ * Default is 0 (no limit). Only valid for TCP_QUEUE_OOSEQ==0.
+ */
+#ifndef TCP_OOSEQ_MAX_BYTES
+#define TCP_OOSEQ_MAX_BYTES             0
+#endif
+
+/**
+ * TCP_OOSEQ_MAX_PBUFS: The maximum number of pbufs queued on ooseq per pcb.
+ * Default is 0 (no limit). Only valid for TCP_QUEUE_OOSEQ==0.
+ */
+#ifndef TCP_OOSEQ_MAX_PBUFS
+#define TCP_OOSEQ_MAX_PBUFS             0
+#endif
+
+/**
+ * TCP_LISTEN_BACKLOG: Enable the backlog option for tcp listen pcb.
+ */
+#ifndef TCP_LISTEN_BACKLOG
+#define TCP_LISTEN_BACKLOG              0
+#endif
+
+/**
+ * The maximum allowed backlog for TCP listen netconns.
+ * This backlog is used unless another is explicitly specified.
+ * 0xff is the maximum (u8_t).
+ */
+#ifndef TCP_DEFAULT_LISTEN_BACKLOG
+#define TCP_DEFAULT_LISTEN_BACKLOG      0xff
+#endif
+
+/**
+ * TCP_OVERSIZE: The maximum number of bytes that tcp_write may
+ * allocate ahead of time in an attempt to create shorter pbuf chains
+ * for transmission. The meaningful range is 0 to TCP_MSS. Some
+ * suggested values are:
+ *
+ * 0:         Disable oversized allocation. Each tcp_write() allocates a new
+              pbuf (old behaviour).
+ * 1:         Allocate size-aligned pbufs with minimal excess. Use this if your
+ *            scatter-gather DMA requires aligned fragments.
+ * 128:       Limit the pbuf/memory overhead to 20%.
+ * TCP_MSS:   Try to create unfragmented TCP packets.
+ * TCP_MSS/4: Try to create 4 fragments or less per TCP packet.
+ */
+#ifndef TCP_OVERSIZE
+#define TCP_OVERSIZE                    TCP_MSS
+#endif
+
+/**
+ * LWIP_TCP_TIMESTAMPS==1: support the TCP timestamp option.
+ */
+#ifndef LWIP_TCP_TIMESTAMPS
+#define LWIP_TCP_TIMESTAMPS             0
+#endif
+
+/**
+ * TCP_WND_UPDATE_THRESHOLD: difference in window to trigger an
+ * explicit window update
+ */
+#ifndef TCP_WND_UPDATE_THRESHOLD
+#define TCP_WND_UPDATE_THRESHOLD   (TCP_WND / 4)
+#endif
+
+/**
+ * LWIP_EVENT_API and LWIP_CALLBACK_API: Only one of these should be set to 1.
+ *     LWIP_EVENT_API==1: The user defines lwip_tcp_event() to receive all
+ *         events (accept, sent, etc) that happen in the system.
+ *     LWIP_CALLBACK_API==1: The PCB callback function is called directly
+ *         for the event. This is the default.
+ */
+#if !defined(LWIP_EVENT_API) && !defined(LWIP_CALLBACK_API)
+#define LWIP_EVENT_API                  0
+#define LWIP_CALLBACK_API               1
+#endif
+
+
+/*
+   ----------------------------------
+   ---------- Pbuf options ----------
+   ----------------------------------
+*/
+/**
+ * PBUF_LINK_HLEN: the number of bytes that should be allocated for a
+ * link level header. The default is 14, the standard value for
+ * Ethernet.
+ */
+#ifndef PBUF_LINK_HLEN
+#define PBUF_LINK_HLEN                  (14 + ETH_PAD_SIZE)
+#endif
+
+/**
+ * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is
+ * designed to accomodate single full size TCP frame in one pbuf, including
+ * TCP_MSS, IP header, and link header.
+ */
+#ifndef PBUF_POOL_BUFSIZE
+#define PBUF_POOL_BUFSIZE               LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_HLEN)
+#endif
+
+/*
+   ------------------------------------------------
+   ---------- Network Interfaces options ----------
+   ------------------------------------------------
+*/
+/**
+ * LWIP_NETIF_HOSTNAME==1: use DHCP_OPTION_HOSTNAME with netif's hostname
+ * field.
+ */
+#ifndef LWIP_NETIF_HOSTNAME
+#define LWIP_NETIF_HOSTNAME             0
+#endif
+
+/**
+ * LWIP_NETIF_API==1: Support netif api (in netifapi.c)
+ */
+#ifndef LWIP_NETIF_API
+#define LWIP_NETIF_API                  0
+#endif
+
+/**
+ * LWIP_NETIF_STATUS_CALLBACK==1: Support a callback function whenever an interface
+ * changes its up/down status (i.e., due to DHCP IP acquistion)
+ */
+#ifndef LWIP_NETIF_STATUS_CALLBACK
+#define LWIP_NETIF_STATUS_CALLBACK      0
+#endif
+
+/**
+ * LWIP_NETIF_LINK_CALLBACK==1: Support a callback function from an interface
+ * whenever the link changes (i.e., link down)
+ */
+#ifndef LWIP_NETIF_LINK_CALLBACK
+#define LWIP_NETIF_LINK_CALLBACK        0
+#endif
+
+/**
+ * LWIP_NETIF_REMOVE_CALLBACK==1: Support a callback function that is called
+ * when a netif has been removed
+ */
+#ifndef LWIP_NETIF_REMOVE_CALLBACK
+#define LWIP_NETIF_REMOVE_CALLBACK      0
+#endif
+
+/**
+ * LWIP_NETIF_HWADDRHINT==1: Cache link-layer-address hints (e.g. table
+ * indices) in struct netif. TCP and UDP can make use of this to prevent
+ * scanning the ARP table for every sent packet. While this is faster for big
+ * ARP tables or many concurrent connections, it might be counterproductive
+ * if you have a tiny ARP table or if there never are concurrent connections.
+ */
+#ifndef LWIP_NETIF_HWADDRHINT
+#define LWIP_NETIF_HWADDRHINT           0
+#endif
+
+/**
+ * LWIP_NETIF_LOOPBACK==1: Support sending packets with a destination IP
+ * address equal to the netif IP address, looping them back up the stack.
+ */
+#ifndef LWIP_NETIF_LOOPBACK
+#define LWIP_NETIF_LOOPBACK             0
+#endif
+
+/**
+ * LWIP_LOOPBACK_MAX_PBUFS: Maximum number of pbufs on queue for loopback
+ * sending for each netif (0 = disabled)
+ */
+#ifndef LWIP_LOOPBACK_MAX_PBUFS
+#define LWIP_LOOPBACK_MAX_PBUFS         0
+#endif
+
+/**
+ * LWIP_NETIF_LOOPBACK_MULTITHREADING: Indicates whether threading is enabled in
+ * the system, as netifs must change how they behave depending on this setting
+ * for the LWIP_NETIF_LOOPBACK option to work.
+ * Setting this is needed to avoid reentering non-reentrant functions like
+ * tcp_input().
+ *    LWIP_NETIF_LOOPBACK_MULTITHREADING==1: Indicates that the user is using a
+ *       multithreaded environment like tcpip.c. In this case, netif->input()
+ *       is called directly.
+ *    LWIP_NETIF_LOOPBACK_MULTITHREADING==0: Indicates a polling (or NO_SYS) setup.
+ *       The packets are put on a list and netif_poll() must be called in
+ *       the main application loop.
+ */
+#ifndef LWIP_NETIF_LOOPBACK_MULTITHREADING
+#define LWIP_NETIF_LOOPBACK_MULTITHREADING    (!NO_SYS)
+#endif
+
+/**
+ * LWIP_NETIF_TX_SINGLE_PBUF: if this is set to 1, lwIP tries to put all data
+ * to be sent into one single pbuf. This is for compatibility with DMA-enabled
+ * MACs that do not support scatter-gather.
+ * Beware that this might involve CPU-memcpy before transmitting that would not
+ * be needed without this flag! Use this only if you need to!
+ *
+ * @todo: TCP and IP-frag do not work with this, yet:
+ */
+#ifndef LWIP_NETIF_TX_SINGLE_PBUF
+#define LWIP_NETIF_TX_SINGLE_PBUF             0
+#endif /* LWIP_NETIF_TX_SINGLE_PBUF */
+
+/*
+   ------------------------------------
+   ---------- LOOPIF options ----------
+   ------------------------------------
+*/
+/**
+ * LWIP_HAVE_LOOPIF==1: Support loop interface (127.0.0.1) and loopif.c
+ */
+#ifndef LWIP_HAVE_LOOPIF
+#define LWIP_HAVE_LOOPIF                0
+#endif
+
+/*
+   ------------------------------------
+   ---------- SLIPIF options ----------
+   ------------------------------------
+*/
+/**
+ * LWIP_HAVE_SLIPIF==1: Support slip interface and slipif.c
+ */
+#ifndef LWIP_HAVE_SLIPIF
+#define LWIP_HAVE_SLIPIF                0
+#endif
+
+/*
+   ------------------------------------
+   ---------- Thread options ----------
+   ------------------------------------
+*/
+/**
+ * TCPIP_THREAD_NAME: The name assigned to the main tcpip thread.
+ */
+#ifndef TCPIP_THREAD_NAME
+#define TCPIP_THREAD_NAME              "tcpip_thread"
+#endif
+
+/**
+ * TCPIP_THREAD_STACKSIZE: The stack size used by the main tcpip thread.
+ * The stack size value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef TCPIP_THREAD_STACKSIZE
+#define TCPIP_THREAD_STACKSIZE          1024
+#endif
+
+/**
+ * TCPIP_THREAD_PRIO: The priority assigned to the main tcpip thread.
+ * The priority value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef TCPIP_THREAD_PRIO
+#define TCPIP_THREAD_PRIO               (LOWPRIO + 1)
+#endif
+
+/**
+ * TCPIP_MBOX_SIZE: The mailbox size for the tcpip thread messages
+ * The queue size value itself is platform-dependent, but is passed to
+ * sys_mbox_new() when tcpip_init is called.
+ */
+#ifndef TCPIP_MBOX_SIZE
+#define TCPIP_MBOX_SIZE                 MEMP_NUM_PBUF
+#endif
+
+/**
+ * SLIPIF_THREAD_NAME: The name assigned to the slipif_loop thread.
+ */
+#ifndef SLIPIF_THREAD_NAME
+#define SLIPIF_THREAD_NAME             "slipif_loop"
+#endif
+
+/**
+ * SLIP_THREAD_STACKSIZE: The stack size used by the slipif_loop thread.
+ * The stack size value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef SLIPIF_THREAD_STACKSIZE
+#define SLIPIF_THREAD_STACKSIZE         1024
+#endif
+
+/**
+ * SLIPIF_THREAD_PRIO: The priority assigned to the slipif_loop thread.
+ * The priority value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef SLIPIF_THREAD_PRIO
+#define SLIPIF_THREAD_PRIO              (LOWPRIO + 1)
+#endif
+
+/**
+ * PPP_THREAD_NAME: The name assigned to the pppInputThread.
+ */
+#ifndef PPP_THREAD_NAME
+#define PPP_THREAD_NAME                "pppInputThread"
+#endif
+
+/**
+ * PPP_THREAD_STACKSIZE: The stack size used by the pppInputThread.
+ * The stack size value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef PPP_THREAD_STACKSIZE
+#define PPP_THREAD_STACKSIZE            1024
+#endif
+
+/**
+ * PPP_THREAD_PRIO: The priority assigned to the pppInputThread.
+ * The priority value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef PPP_THREAD_PRIO
+#define PPP_THREAD_PRIO                 (LOWPRIO + 1)
+#endif
+
+/**
+ * DEFAULT_THREAD_NAME: The name assigned to any other lwIP thread.
+ */
+#ifndef DEFAULT_THREAD_NAME
+#define DEFAULT_THREAD_NAME            "lwIP"
+#endif
+
+/**
+ * DEFAULT_THREAD_STACKSIZE: The stack size used by any other lwIP thread.
+ * The stack size value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef DEFAULT_THREAD_STACKSIZE
+#define DEFAULT_THREAD_STACKSIZE        1024
+#endif
+
+/**
+ * DEFAULT_THREAD_PRIO: The priority assigned to any other lwIP thread.
+ * The priority value itself is platform-dependent, but is passed to
+ * sys_thread_new() when the thread is created.
+ */
+#ifndef DEFAULT_THREAD_PRIO
+#define DEFAULT_THREAD_PRIO             (LOWPRIO + 1)
+#endif
+
+/**
+ * DEFAULT_RAW_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
+ * NETCONN_RAW. The queue size value itself is platform-dependent, but is passed
+ * to sys_mbox_new() when the recvmbox is created.
+ */
+#ifndef DEFAULT_RAW_RECVMBOX_SIZE
+#define DEFAULT_RAW_RECVMBOX_SIZE       4
+#endif
+
+/**
+ * DEFAULT_UDP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
+ * NETCONN_UDP. The queue size value itself is platform-dependent, but is passed
+ * to sys_mbox_new() when the recvmbox is created.
+ */
+#ifndef DEFAULT_UDP_RECVMBOX_SIZE
+#define DEFAULT_UDP_RECVMBOX_SIZE       4
+#endif
+
+/**
+ * DEFAULT_TCP_RECVMBOX_SIZE: The mailbox size for the incoming packets on a
+ * NETCONN_TCP. The queue size value itself is platform-dependent, but is passed
+ * to sys_mbox_new() when the recvmbox is created.
+ */
+#ifndef DEFAULT_TCP_RECVMBOX_SIZE
+#define DEFAULT_TCP_RECVMBOX_SIZE       40
+#endif
+
+/**
+ * DEFAULT_ACCEPTMBOX_SIZE: The mailbox size for the incoming connections.
+ * The queue size value itself is platform-dependent, but is passed to
+ * sys_mbox_new() when the acceptmbox is created.
+ */
+#ifndef DEFAULT_ACCEPTMBOX_SIZE
+#define DEFAULT_ACCEPTMBOX_SIZE         4
+#endif
+
+/*
+   ----------------------------------------------
+   ---------- Sequential layer options ----------
+   ----------------------------------------------
+*/
+/**
+ * LWIP_TCPIP_CORE_LOCKING: (EXPERIMENTAL!)
+ * Don't use it if you're not an active lwIP project member
+ */
+#ifndef LWIP_TCPIP_CORE_LOCKING
+#define LWIP_TCPIP_CORE_LOCKING         0
+#endif
+
+/**
+ * LWIP_TCPIP_CORE_LOCKING_INPUT: (EXPERIMENTAL!)
+ * Don't use it if you're not an active lwIP project member
+ */
+#ifndef LWIP_TCPIP_CORE_LOCKING_INPUT
+#define LWIP_TCPIP_CORE_LOCKING_INPUT   0
+#endif
+
+/**
+ * LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c)
+ */
+#ifndef LWIP_NETCONN
+#define LWIP_NETCONN                    1
+#endif
+
+/** LWIP_TCPIP_TIMEOUT==1: Enable tcpip_timeout/tcpip_untimeout tod create
+ * timers running in tcpip_thread from another thread.
+ */
+#ifndef LWIP_TCPIP_TIMEOUT
+#define LWIP_TCPIP_TIMEOUT              1
+#endif
+
+/*
+   ------------------------------------
+   ---------- Socket options ----------
+   ------------------------------------
+*/
+/**
+ * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c)
+ */
+#ifndef LWIP_SOCKET
+#define LWIP_SOCKET                     1
+#endif
+
+/**
+ * LWIP_COMPAT_SOCKETS==1: Enable BSD-style sockets functions names.
+ * (only used if you use sockets.c)
+ */
+#ifndef LWIP_COMPAT_SOCKETS
+#define LWIP_COMPAT_SOCKETS             1
+#endif
+
+/**
+ * LWIP_POSIX_SOCKETS_IO_NAMES==1: Enable POSIX-style sockets functions names.
+ * Disable this option if you use a POSIX operating system that uses the same
+ * names (read, write & close). (only used if you use sockets.c)
+ */
+#ifndef LWIP_POSIX_SOCKETS_IO_NAMES
+#define LWIP_POSIX_SOCKETS_IO_NAMES     1
+#endif
+
+/**
+ * LWIP_TCP_KEEPALIVE==1: Enable TCP_KEEPIDLE, TCP_KEEPINTVL and TCP_KEEPCNT
+ * options processing. Note that TCP_KEEPIDLE and TCP_KEEPINTVL have to be set
+ * in seconds. (does not require sockets.c, and will affect tcp.c)
+ */
+#ifndef LWIP_TCP_KEEPALIVE
+#define LWIP_TCP_KEEPALIVE              0
+#endif
+
+/**
+ * LWIP_SO_SNDTIMEO==1: Enable send timeout for sockets/netconns and
+ * SO_SNDTIMEO processing.
+ */
+#ifndef LWIP_SO_SNDTIMEO
+#define LWIP_SO_SNDTIMEO                0
+#endif
+
+/**
+ * LWIP_SO_RCVTIMEO==1: Enable receive timeout for sockets/netconns and
+ * SO_RCVTIMEO processing.
+ */
+#ifndef LWIP_SO_RCVTIMEO
+#define LWIP_SO_RCVTIMEO                0
+#endif
+
+/**
+ * LWIP_SO_RCVBUF==1: Enable SO_RCVBUF processing.
+ */
+#ifndef LWIP_SO_RCVBUF
+#define LWIP_SO_RCVBUF                  0
+#endif
+
+/**
+ * If LWIP_SO_RCVBUF is used, this is the default value for recv_bufsize.
+ */
+#ifndef RECV_BUFSIZE_DEFAULT
+#define RECV_BUFSIZE_DEFAULT            INT_MAX
+#endif
+
+/**
+ * SO_REUSE==1: Enable SO_REUSEADDR option.
+ */
+#ifndef SO_REUSE
+#define SO_REUSE                        0
+#endif
+
+/**
+ * SO_REUSE_RXTOALL==1: Pass a copy of incoming broadcast/multicast packets
+ * to all local matches if SO_REUSEADDR is turned on.
+ * WARNING: Adds a memcpy for every packet if passing to more than one pcb!
+ */
+#ifndef SO_REUSE_RXTOALL
+#define SO_REUSE_RXTOALL                0
+#endif
+
+/*
+   ----------------------------------------
+   ---------- Statistics options ----------
+   ----------------------------------------
+*/
+/**
+ * LWIP_STATS==1: Enable statistics collection in lwip_stats.
+ */
+#ifndef LWIP_STATS
+#define LWIP_STATS                      1
+#endif
+
+#if LWIP_STATS
+
+/**
+ * LWIP_STATS_DISPLAY==1: Compile in the statistics output functions.
+ */
+#ifndef LWIP_STATS_DISPLAY
+#define LWIP_STATS_DISPLAY              0
+#endif
+
+/**
+ * LINK_STATS==1: Enable link stats.
+ */
+#ifndef LINK_STATS
+#define LINK_STATS                      1
+#endif
+
+/**
+ * ETHARP_STATS==1: Enable etharp stats.
+ */
+#ifndef ETHARP_STATS
+#define ETHARP_STATS                    (LWIP_ARP)
+#endif
+
+/**
+ * IP_STATS==1: Enable IP stats.
+ */
+#ifndef IP_STATS
+#define IP_STATS                        1
+#endif
+
+/**
+ * IPFRAG_STATS==1: Enable IP fragmentation stats. Default is
+ * on if using either frag or reass.
+ */
+#ifndef IPFRAG_STATS
+#define IPFRAG_STATS                    (IP_REASSEMBLY || IP_FRAG)
+#endif
+
+/**
+ * ICMP_STATS==1: Enable ICMP stats.
+ */
+#ifndef ICMP_STATS
+#define ICMP_STATS                      1
+#endif
+
+/**
+ * IGMP_STATS==1: Enable IGMP stats.
+ */
+#ifndef IGMP_STATS
+#define IGMP_STATS                      (LWIP_IGMP)
+#endif
+
+/**
+ * UDP_STATS==1: Enable UDP stats. Default is on if
+ * UDP enabled, otherwise off.
+ */
+#ifndef UDP_STATS
+#define UDP_STATS                       (LWIP_UDP)
+#endif
+
+/**
+ * TCP_STATS==1: Enable TCP stats. Default is on if TCP
+ * enabled, otherwise off.
+ */
+#ifndef TCP_STATS
+#define TCP_STATS                       (LWIP_TCP)
+#endif
+
+/**
+ * MEM_STATS==1: Enable mem.c stats.
+ */
+#ifndef MEM_STATS
+#define MEM_STATS                       ((MEM_LIBC_MALLOC == 0) && (MEM_USE_POOLS == 0))
+#endif
+
+/**
+ * MEMP_STATS==1: Enable memp.c pool stats.
+ */
+#ifndef MEMP_STATS
+#define MEMP_STATS                      (MEMP_MEM_MALLOC == 0)
+#endif
+
+/**
+ * SYS_STATS==1: Enable system stats (sem and mbox counts, etc).
+ */
+#ifndef SYS_STATS
+#define SYS_STATS                       (NO_SYS == 0)
+#endif
+
+#else
+
+#define LINK_STATS                      0
+#define IP_STATS                        0
+#define IPFRAG_STATS                    0
+#define ICMP_STATS                      0
+#define IGMP_STATS                      0
+#define UDP_STATS                       0
+#define TCP_STATS                       0
+#define MEM_STATS                       0
+#define MEMP_STATS                      0
+#define SYS_STATS                       0
+#define LWIP_STATS_DISPLAY              0
+
+#endif /* LWIP_STATS */
+
+/*
+   ---------------------------------
+   ---------- PPP options ----------
+   ---------------------------------
+*/
+/**
+ * PPP_SUPPORT==1: Enable PPP.
+ */
+#ifndef PPP_SUPPORT
+#define PPP_SUPPORT                     0
+#endif
+
+/**
+ * PPPOE_SUPPORT==1: Enable PPP Over Ethernet
+ */
+#ifndef PPPOE_SUPPORT
+#define PPPOE_SUPPORT                   0
+#endif
+
+/**
+ * PPPOS_SUPPORT==1: Enable PPP Over Serial
+ */
+#ifndef PPPOS_SUPPORT
+#define PPPOS_SUPPORT                   PPP_SUPPORT
+#endif
+
+#if PPP_SUPPORT
+
+/**
+ * NUM_PPP: Max PPP sessions.
+ */
+#ifndef NUM_PPP
+#define NUM_PPP                         1
+#endif
+
+/**
+ * PAP_SUPPORT==1: Support PAP.
+ */
+#ifndef PAP_SUPPORT
+#define PAP_SUPPORT                     0
+#endif
+
+/**
+ * CHAP_SUPPORT==1: Support CHAP.
+ */
+#ifndef CHAP_SUPPORT
+#define CHAP_SUPPORT                    0
+#endif
+
+/**
+ * MSCHAP_SUPPORT==1: Support MSCHAP. CURRENTLY NOT SUPPORTED! DO NOT SET!
+ */
+#ifndef MSCHAP_SUPPORT
+#define MSCHAP_SUPPORT                  0
+#endif
+
+/**
+ * CBCP_SUPPORT==1: Support CBCP. CURRENTLY NOT SUPPORTED! DO NOT SET!
+ */
+#ifndef CBCP_SUPPORT
+#define CBCP_SUPPORT                    0
+#endif
+
+/**
+ * CCP_SUPPORT==1: Support CCP. CURRENTLY NOT SUPPORTED! DO NOT SET!
+ */
+#ifndef CCP_SUPPORT
+#define CCP_SUPPORT                     0
+#endif
+
+/**
+ * VJ_SUPPORT==1: Support VJ header compression.
+ */
+#ifndef VJ_SUPPORT
+#define VJ_SUPPORT                      0
+#endif
+
+/**
+ * MD5_SUPPORT==1: Support MD5 (see also CHAP).
+ */
+#ifndef MD5_SUPPORT
+#define MD5_SUPPORT                     0
+#endif
+
+/*
+ * Timeouts
+ */
+#ifndef FSM_DEFTIMEOUT
+#define FSM_DEFTIMEOUT                  6       /* Timeout time in seconds */
+#endif
+
+#ifndef FSM_DEFMAXTERMREQS
+#define FSM_DEFMAXTERMREQS              2       /* Maximum Terminate-Request transmissions */
+#endif
+
+#ifndef FSM_DEFMAXCONFREQS
+#define FSM_DEFMAXCONFREQS              10      /* Maximum Configure-Request transmissions */
+#endif
+
+#ifndef FSM_DEFMAXNAKLOOPS
+#define FSM_DEFMAXNAKLOOPS              5       /* Maximum number of nak loops */
+#endif
+
+#ifndef UPAP_DEFTIMEOUT
+#define UPAP_DEFTIMEOUT                 6       /* Timeout (seconds) for retransmitting req */
+#endif
+
+#ifndef UPAP_DEFREQTIME
+#define UPAP_DEFREQTIME                 30      /* Time to wait for auth-req from peer */
+#endif
+
+#ifndef CHAP_DEFTIMEOUT
+#define CHAP_DEFTIMEOUT                 6       /* Timeout time in seconds */
+#endif
+
+#ifndef CHAP_DEFTRANSMITS
+#define CHAP_DEFTRANSMITS               10      /* max # times to send challenge */
+#endif
+
+/* Interval in seconds between keepalive echo requests, 0 to disable. */
+#ifndef LCP_ECHOINTERVAL
+#define LCP_ECHOINTERVAL                0
+#endif
+
+/* Number of unanswered echo requests before failure. */
+#ifndef LCP_MAXECHOFAILS
+#define LCP_MAXECHOFAILS                3
+#endif
+
+/* Max Xmit idle time (in jiffies) before resend flag char. */
+#ifndef PPP_MAXIDLEFLAG
+#define PPP_MAXIDLEFLAG                 100
+#endif
+
+/*
+ * Packet sizes
+ *
+ * Note - lcp shouldn't be allowed to negotiate stuff outside these
+ *    limits.  See lcp.h in the pppd directory.
+ * (XXX - these constants should simply be shared by lcp.c instead
+ *    of living in lcp.h)
+ */
+#define PPP_MTU                         1500     /* Default MTU (size of Info field) */
+#ifndef PPP_MAXMTU
+/* #define PPP_MAXMTU  65535 - (PPP_HDRLEN + PPP_FCSLEN) */
+#define PPP_MAXMTU                      1500 /* Largest MTU we allow */
+#endif
+#define PPP_MINMTU                      64
+#define PPP_MRU                         1500     /* default MRU = max length of info field */
+#define PPP_MAXMRU                      1500     /* Largest MRU we allow */
+#ifndef PPP_DEFMRU
+#define PPP_DEFMRU                      296             /* Try for this */
+#endif
+#define PPP_MINMRU                      128             /* No MRUs below this */
+
+#ifndef MAXNAMELEN
+#define MAXNAMELEN                      256     /* max length of hostname or name for auth */
+#endif
+#ifndef MAXSECRETLEN
+#define MAXSECRETLEN                    256     /* max length of password or secret */
+#endif
+
+#endif /* PPP_SUPPORT */
+
+/*
+   --------------------------------------
+   ---------- Checksum options ----------
+   --------------------------------------
+*/
+/**
+ * CHECKSUM_GEN_IP==1: Generate checksums in software for outgoing IP packets.
+ */
+#ifndef CHECKSUM_GEN_IP
+#define CHECKSUM_GEN_IP                 1
+#endif
+ 
+/**
+ * CHECKSUM_GEN_UDP==1: Generate checksums in software for outgoing UDP packets.
+ */
+#ifndef CHECKSUM_GEN_UDP
+#define CHECKSUM_GEN_UDP                1
+#endif
+ 
+/**
+ * CHECKSUM_GEN_TCP==1: Generate checksums in software for outgoing TCP packets.
+ */
+#ifndef CHECKSUM_GEN_TCP
+#define CHECKSUM_GEN_TCP                1
+#endif
+
+/**
+ * CHECKSUM_GEN_ICMP==1: Generate checksums in software for outgoing ICMP packets.
+ */
+#ifndef CHECKSUM_GEN_ICMP
+#define CHECKSUM_GEN_ICMP               1
+#endif
+ 
+/**
+ * CHECKSUM_CHECK_IP==1: Check checksums in software for incoming IP packets.
+ */
+#ifndef CHECKSUM_CHECK_IP
+#define CHECKSUM_CHECK_IP               1
+#endif
+ 
+/**
+ * CHECKSUM_CHECK_UDP==1: Check checksums in software for incoming UDP packets.
+ */
+#ifndef CHECKSUM_CHECK_UDP
+#define CHECKSUM_CHECK_UDP              1
+#endif
+
+/**
+ * CHECKSUM_CHECK_TCP==1: Check checksums in software for incoming TCP packets.
+ */
+#ifndef CHECKSUM_CHECK_TCP
+#define CHECKSUM_CHECK_TCP              1
+#endif
+
+/**
+ * LWIP_CHECKSUM_ON_COPY==1: Calculate checksum when copying data from
+ * application buffers to pbufs.
+ */
+#ifndef LWIP_CHECKSUM_ON_COPY
+#define LWIP_CHECKSUM_ON_COPY           0
+#endif
+
+/*
+   ---------------------------------------
+   ---------- Hook options ---------------
+   ---------------------------------------
+*/
+
+/* Hooks are undefined by default, define them to a function if you need them. */
+
+/**
+ * LWIP_HOOK_IP4_INPUT(pbuf, input_netif):
+ * - called from ip_input() (IPv4)
+ * - pbuf: received struct pbuf passed to ip_input()
+ * - input_netif: struct netif on which the packet has been received
+ * Return values:
+ * - 0: Hook has not consumed the packet, packet is processed as normal
+ * - != 0: Hook has consumed the packet.
+ * If the hook consumed the packet, 'pbuf' is in the responsibility of the hook
+ * (i.e. free it when done).
+ */
+
+/**
+ * LWIP_HOOK_IP4_ROUTE(dest):
+ * - called from ip_route() (IPv4)
+ * - dest: destination IPv4 address
+ * Returns the destination netif or NULL if no destination netif is found. In
+ * that case, ip_route() continues as normal.
+ */
+
+/*
+   ---------------------------------------
+   ---------- Debugging options ----------
+   ---------------------------------------
+*/
+/**
+ * LWIP_DBG_MIN_LEVEL: After masking, the value of the debug is
+ * compared against this value. If it is smaller, then debugging
+ * messages are written.
+ */
+#ifndef LWIP_DBG_MIN_LEVEL
+#define LWIP_DBG_MIN_LEVEL              LWIP_DBG_LEVEL_ALL
+#endif
+
+/**
+ * LWIP_DBG_TYPES_ON: A mask that can be used to globally enable/disable
+ * debug messages of certain types.
+ */
+#ifndef LWIP_DBG_TYPES_ON
+#define LWIP_DBG_TYPES_ON               LWIP_DBG_ON
+#endif
+
+/**
+ * ETHARP_DEBUG: Enable debugging in etharp.c.
+ */
+#ifndef ETHARP_DEBUG
+#define ETHARP_DEBUG                    LWIP_DBG_OFF
+#endif
+
+/**
+ * NETIF_DEBUG: Enable debugging in netif.c.
+ */
+#ifndef NETIF_DEBUG
+#define NETIF_DEBUG                     LWIP_DBG_OFF
+#endif
+
+/**
+ * PBUF_DEBUG: Enable debugging in pbuf.c.
+ */
+#ifndef PBUF_DEBUG
+#define PBUF_DEBUG                      LWIP_DBG_OFF
+#endif
+
+/**
+ * API_LIB_DEBUG: Enable debugging in api_lib.c.
+ */
+#ifndef API_LIB_DEBUG
+#define API_LIB_DEBUG                   LWIP_DBG_OFF
+#endif
+
+/**
+ * API_MSG_DEBUG: Enable debugging in api_msg.c.
+ */
+#ifndef API_MSG_DEBUG
+#define API_MSG_DEBUG                   LWIP_DBG_OFF
+#endif
+
+/**
+ * SOCKETS_DEBUG: Enable debugging in sockets.c.
+ */
+#ifndef SOCKETS_DEBUG
+#define SOCKETS_DEBUG                   LWIP_DBG_OFF
+#endif
+
+/**
+ * ICMP_DEBUG: Enable debugging in icmp.c.
+ */
+#ifndef ICMP_DEBUG
+#define ICMP_DEBUG                      LWIP_DBG_OFF
+#endif
+
+/**
+ * IGMP_DEBUG: Enable debugging in igmp.c.
+ */
+#ifndef IGMP_DEBUG
+#define IGMP_DEBUG                      LWIP_DBG_OFF
+#endif
+
+/**
+ * INET_DEBUG: Enable debugging in inet.c.
+ */
+#ifndef INET_DEBUG
+#define INET_DEBUG                      LWIP_DBG_OFF
+#endif
+
+/**
+ * IP_DEBUG: Enable debugging for IP.
+ */
+#ifndef IP_DEBUG
+#define IP_DEBUG                        LWIP_DBG_OFF
+#endif
+
+/**
+ * IP_REASS_DEBUG: Enable debugging in ip_frag.c for both frag & reass.
+ */
+#ifndef IP_REASS_DEBUG
+#define IP_REASS_DEBUG                  LWIP_DBG_OFF
+#endif
+
+/**
+ * RAW_DEBUG: Enable debugging in raw.c.
+ */
+#ifndef RAW_DEBUG
+#define RAW_DEBUG                       LWIP_DBG_OFF
+#endif
+
+/**
+ * MEM_DEBUG: Enable debugging in mem.c.
+ */
+#ifndef MEM_DEBUG
+#define MEM_DEBUG                       LWIP_DBG_OFF
+#endif
+
+/**
+ * MEMP_DEBUG: Enable debugging in memp.c.
+ */
+#ifndef MEMP_DEBUG
+#define MEMP_DEBUG                      LWIP_DBG_OFF
+#endif
+
+/**
+ * SYS_DEBUG: Enable debugging in sys.c.
+ */
+#ifndef SYS_DEBUG
+#define SYS_DEBUG                       LWIP_DBG_OFF
+#endif
+
+/**
+ * TIMERS_DEBUG: Enable debugging in timers.c.
+ */
+#ifndef TIMERS_DEBUG
+#define TIMERS_DEBUG                    LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_DEBUG: Enable debugging for TCP.
+ */
+#ifndef TCP_DEBUG
+#define TCP_DEBUG                       LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_INPUT_DEBUG: Enable debugging in tcp_in.c for incoming debug.
+ */
+#ifndef TCP_INPUT_DEBUG
+#define TCP_INPUT_DEBUG                 LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_FR_DEBUG: Enable debugging in tcp_in.c for fast retransmit.
+ */
+#ifndef TCP_FR_DEBUG
+#define TCP_FR_DEBUG                    LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_RTO_DEBUG: Enable debugging in TCP for retransmit
+ * timeout.
+ */
+#ifndef TCP_RTO_DEBUG
+#define TCP_RTO_DEBUG                   LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_CWND_DEBUG: Enable debugging for TCP congestion window.
+ */
+#ifndef TCP_CWND_DEBUG
+#define TCP_CWND_DEBUG                  LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_WND_DEBUG: Enable debugging in tcp_in.c for window updating.
+ */
+#ifndef TCP_WND_DEBUG
+#define TCP_WND_DEBUG                   LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_OUTPUT_DEBUG: Enable debugging in tcp_out.c output functions.
+ */
+#ifndef TCP_OUTPUT_DEBUG
+#define TCP_OUTPUT_DEBUG                LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_RST_DEBUG: Enable debugging for TCP with the RST message.
+ */
+#ifndef TCP_RST_DEBUG
+#define TCP_RST_DEBUG                   LWIP_DBG_OFF
+#endif
+
+/**
+ * TCP_QLEN_DEBUG: Enable debugging for TCP queue lengths.
+ */
+#ifndef TCP_QLEN_DEBUG
+#define TCP_QLEN_DEBUG                  LWIP_DBG_OFF
+#endif
+
+/**
+ * UDP_DEBUG: Enable debugging in UDP.
+ */
+#ifndef UDP_DEBUG
+#define UDP_DEBUG                       LWIP_DBG_OFF
+#endif
+
+/**
+ * TCPIP_DEBUG: Enable debugging in tcpip.c.
+ */
+#ifndef TCPIP_DEBUG
+#define TCPIP_DEBUG                     LWIP_DBG_OFF
+#endif
+
+/**
+ * PPP_DEBUG: Enable debugging for PPP.
+ */
+#ifndef PPP_DEBUG
+#define PPP_DEBUG                       LWIP_DBG_OFF
+#endif
+
+/**
+ * SLIP_DEBUG: Enable debugging in slipif.c.
+ */
+#ifndef SLIP_DEBUG
+#define SLIP_DEBUG                      LWIP_DBG_OFF
+#endif
+
+/**
+ * DHCP_DEBUG: Enable debugging in dhcp.c.
+ */
+#ifndef DHCP_DEBUG
+#define DHCP_DEBUG                      LWIP_DBG_OFF
+#endif
+
+/**
+ * AUTOIP_DEBUG: Enable debugging in autoip.c.
+ */
+#ifndef AUTOIP_DEBUG
+#define AUTOIP_DEBUG                    LWIP_DBG_OFF
+#endif
+
+/**
+ * SNMP_MSG_DEBUG: Enable debugging for SNMP messages.
+ */
+#ifndef SNMP_MSG_DEBUG
+#define SNMP_MSG_DEBUG                  LWIP_DBG_OFF
+#endif
+
+/**
+ * SNMP_MIB_DEBUG: Enable debugging for SNMP MIBs.
+ */
+#ifndef SNMP_MIB_DEBUG
+#define SNMP_MIB_DEBUG                  LWIP_DBG_OFF
+#endif
+
+/**
+ * DNS_DEBUG: Enable debugging for DNS.
+ */
+#ifndef DNS_DEBUG
+#define DNS_DEBUG                       LWIP_DBG_OFF
+#endif
+
+#endif /* __LWIPOPT_H__ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/main.c
new file mode 100644
index 0000000..6cad865
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/main.c
@@ -0,0 +1,391 @@
+/*
+    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include <stdio.h>
+#include <string.h>
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+#include "chprintf.h"
+#include "shell.h"
+
+#include "lwipthread.h"
+#include "web/web.h"
+
+#include "ff.h"
+
+#include "usbcfg.h"
+
+/*===========================================================================*/
+/* Card insertion monitor.                                                   */
+/*===========================================================================*/
+
+#define POLLING_INTERVAL                10
+#define POLLING_DELAY                   10
+
+/**
+ * @brief   Card monitor timer.
+ */
+static virtual_timer_t tmr;
+
+/**
+ * @brief   Debounce counter.
+ */
+static unsigned cnt;
+
+/**
+ * @brief   Card event sources.
+ */
+static event_source_t inserted_event, removed_event;
+
+/**
+ * @brief   Insertion monitor timer callback function.
+ *
+ * @param[in] p         pointer to the @p BaseBlockDevice object
+ *
+ * @notapi
+ */
+static void tmrfunc(void *p) {
+  BaseBlockDevice *bbdp = p;
+
+  chSysLockFromISR();
+  if (cnt > 0) {
+    if (blkIsInserted(bbdp)) {
+      if (--cnt == 0) {
+        chEvtBroadcastI(&inserted_event);
+      }
+    }
+    else
+      cnt = POLLING_INTERVAL;
+  }
+  else {
+    if (!blkIsInserted(bbdp)) {
+      cnt = POLLING_INTERVAL;
+      chEvtBroadcastI(&removed_event);
+    }
+  }
+  chVTSetI(&tmr, MS2ST(POLLING_DELAY), tmrfunc, bbdp);
+  chSysUnlockFromISR();
+}
+
+/**
+ * @brief   Polling monitor start.
+ *
+ * @param[in] p         pointer to an object implementing @p BaseBlockDevice
+ *
+ * @notapi
+ */
+static void tmr_init(void *p) {
+
+  chEvtObjectInit(&inserted_event);
+  chEvtObjectInit(&removed_event);
+  chSysLock();
+  cnt = POLLING_INTERVAL;
+  chVTSetI(&tmr, MS2ST(POLLING_DELAY), tmrfunc, p);
+  chSysUnlock();
+}
+
+/*===========================================================================*/
+/* FatFs related.                                                            */
+/*===========================================================================*/
+
+/**
+ * @brief FS object.
+ */
+static FATFS SDC_FS;
+
+/* FS mounted and ready.*/
+static bool fs_ready = FALSE;
+
+/* Generic large buffer.*/
+static uint8_t fbuff[1024];
+
+static FRESULT scan_files(BaseSequentialStream *chp, char *path) {
+  FRESULT res;
+  FILINFO fno;
+  DIR dir;
+  int i;
+  char *fn;
+
+#if _USE_LFN
+  fno.lfname = 0;
+  fno.lfsize = 0;
+#endif
+  res = f_opendir(&dir, path);
+  if (res == FR_OK) {
+    i = strlen(path);
+    for (;;) {
+      res = f_readdir(&dir, &fno);
+      if (res != FR_OK || fno.fname[0] == 0)
+        break;
+      if (fno.fname[0] == '.')
+        continue;
+      fn = fno.fname;
+      if (fno.fattrib & AM_DIR) {
+        path[i++] = '/';
+        strcpy(&path[i], fn);
+        res = scan_files(chp, path);
+        if (res != FR_OK)
+          break;
+        path[--i] = 0;
+      }
+      else {
+        chprintf(chp, "%s/%s\r\n", path, fn);
+      }
+    }
+  }
+  return res;
+}
+
+/*===========================================================================*/
+/* Command line related.                                                     */
+/*===========================================================================*/
+
+#define SHELL_WA_SIZE   THD_WORKING_AREA_SIZE(2048)
+#define TEST_WA_SIZE    THD_WORKING_AREA_SIZE(256)
+
+static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
+  size_t n, size;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: mem\r\n");
+    return;
+  }
+  n = chHeapStatus(NULL, &size);
+  chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX());
+  chprintf(chp, "heap fragments   : %u\r\n", n);
+  chprintf(chp, "heap free total  : %u bytes\r\n", size);
+}
+
+static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
+  static const char *states[] = {CH_STATE_NAMES};
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: threads\r\n");
+    return;
+  }
+  chprintf(chp, "    addr    stack prio refs     state time\r\n");
+  tp = chRegFirstThread();
+  do {
+    chprintf(chp, "%08lx %08lx %4lu %4lu %9s\r\n",
+            (uint32_t)tp, (uint32_t)tp->p_ctx.r13,
+            (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
+            states[tp->p_state]);
+    tp = chRegNextThread(tp);
+  } while (tp != NULL);
+}
+
+static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: test\r\n");
+    return;
+  }
+  tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(),
+                           TestThread, chp);
+  if (tp == NULL) {
+    chprintf(chp, "out of memory\r\n");
+    return;
+  }
+  chThdWait(tp);
+}
+
+static void cmd_tree(BaseSequentialStream *chp, int argc, char *argv[]) {
+  FRESULT err;
+  uint32_t clusters;
+  FATFS *fsp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: tree\r\n");
+    return;
+  }
+  if (!fs_ready) {
+    chprintf(chp, "File System not mounted\r\n");
+    return;
+  }
+  err = f_getfree("/", &clusters, &fsp);
+  if (err != FR_OK) {
+    chprintf(chp, "FS: f_getfree() failed\r\n");
+    return;
+  }
+  chprintf(chp,
+           "FS: %lu free clusters, %lu sectors per cluster, %lu bytes free\r\n",
+           clusters, (uint32_t)SDC_FS.csize,
+           clusters * (uint32_t)SDC_FS.csize * (uint32_t)MMCSD_BLOCK_SIZE);
+  fbuff[0] = 0;
+  scan_files(chp, (char *)fbuff);
+}
+
+static const ShellCommand commands[] = {
+  {"mem", cmd_mem},
+  {"threads", cmd_threads},
+  {"test", cmd_test},
+  {"tree", cmd_tree},
+  {NULL, NULL}
+};
+
+static const ShellConfig shell_cfg1 = {
+  (BaseSequentialStream *)&SDU2,
+  commands
+};
+
+/*===========================================================================*/
+/* Main and generic code.                                                    */
+/*===========================================================================*/
+
+/*
+ * Card insertion event.
+ */
+static void InsertHandler(eventid_t id) {
+  FRESULT err;
+
+  (void)id;
+  /*
+   * On insertion SDC initialization and FS mount.
+   */
+  if (sdcConnect(&SDCD1))
+    return;
+
+  err = f_mount(&SDC_FS, "/", 1);
+  if (err != FR_OK) {
+    sdcDisconnect(&SDCD1);
+    return;
+  }
+  fs_ready = TRUE;
+}
+
+/*
+ * Card removal event.
+ */
+static void RemoveHandler(eventid_t id) {
+
+  (void)id;
+  sdcDisconnect(&SDCD1);
+  fs_ready = FALSE;
+}
+
+/*
+ * Green LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palToggleLine(LINE_ARD_D13);
+    chThdSleepMilliseconds(fs_ready ? 250 : 500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+  static thread_t *shelltp = NULL;
+  static const evhandler_t evhndl[] = {
+    InsertHandler,
+    RemoveHandler
+  };
+  event_listener_t el0, el1;
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   * - lwIP subsystem initialization using the default configuration.
+   */
+  halInit();
+  chSysInit();
+  lwipInit(NULL);
+
+  /*
+   * Initialize board LED.
+   */
+  palSetLineMode(LINE_ARD_D13, PAL_MODE_OUTPUT_PUSHPULL);
+
+  /*
+   * Initializes a serial-over-USB CDC driver.
+   */
+  sduObjectInit(&SDU2);
+  sduStart(&SDU2, &serusbcfg);
+
+  /*
+   * Activates the USB driver and then the USB bus pull-up on D+.
+   * Note, a delay is inserted in order to not have to disconnect the cable
+   * after a reset.
+   */
+  usbDisconnectBus(serusbcfg.usbp);
+  chThdSleepMilliseconds(1500);
+  usbStart(serusbcfg.usbp, &usbcfg);
+  usbConnectBus(serusbcfg.usbp);
+
+  /*
+   * Shell manager initialization.
+   */
+  shellInit();
+
+  /*
+   * Activates the serial driver 1 and SDC driver 1 using default
+   * configuration.
+   */
+  sdStart(&SD1, NULL);
+  sdcStart(&SDCD1, NULL);
+
+  /*
+   * Activates the card insertion monitor.
+   */
+  tmr_init(&SDCD1);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Creates the HTTP thread (it changes priority internally).
+   */
+  chThdCreateStatic(wa_http_server, sizeof(wa_http_server), NORMALPRIO + 1,
+                    http_server, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and listen for events.
+   */
+  chEvtRegister(&inserted_event, &el0, 0);
+  chEvtRegister(&removed_event, &el1, 1);
+  while (true) {
+    if (!shelltp && (SDU2.config->usbp->state == USB_ACTIVE))
+      shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
+    else if (chThdTerminatedX(shelltp)) {
+      chThdRelease(shelltp);    /* Recovers memory of the previous shell.   */
+      shelltp = NULL;           /* Triggers spawning of a new shell.        */
+    }
+    if (palReadPad(GPIOI, GPIOI_BUTTON_USER) != 0) {
+    }
+    chEvtDispatch(evhndl, chEvtWaitOneTimeout(ALL_EVENTS, MS2ST(500)));
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/mcuconf.h
new file mode 100644
index 0000000..4af2987
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/mcuconf.h
@@ -0,0 +1,386 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F7xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE                 FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   FALSE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   TRUE
+#define STM32_CLOCK48_REQUIRED              TRUE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLM_VALUE                    25
+#define STM32_PLLN_VALUE                    432
+#define STM32_PLLP_VALUE                    2
+#define STM32_PLLQ_VALUE                    9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV4
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSE
+#define STM32_RTCPRE_VALUE                  25
+#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV4
+#define STM32_I2SSRC                        STM32_I2SSRC_PLLI2S
+#define STM32_PLLI2SN_VALUE                 192
+#define STM32_PLLI2SP_VALUE                 4
+#define STM32_PLLI2SQ_VALUE                 4
+#define STM32_PLLI2SR_VALUE                 4
+#define STM32_PLLSAIN_VALUE                 192
+#define STM32_PLLSAIP_VALUE                 4
+#define STM32_PLLSAIQ_VALUE                 4
+#define STM32_PLLSAIR_VALUE                 4
+#define STM32_PLLSAIDIVR                    STM32_PLLSAIDIVR_OFF
+#define STM32_SAI1SEL                       STM32_SAI1SEL_OFF
+#define STM32_SAI2SEL                       STM32_SAI2SEL_OFF
+#define STM32_USART1SEL                     STM32_USART1SEL_PCLK2
+#define STM32_USART2SEL                     STM32_USART2SEL_PCLK1
+#define STM32_USART3SEL                     STM32_USART3SEL_PCLK1
+#define STM32_UART4SEL                      STM32_UART4SEL_PCLK1
+#define STM32_UART5SEL                      STM32_UART5SEL_PCLK1
+#define STM32_USART6SEL                     STM32_USART6SEL_PCLK2
+#define STM32_UART7SEL                      STM32_UART7SEL_PCLK1
+#define STM32_UART8SEL                      STM32_UART8SEL_PCLK1
+#define STM32_I2C1SEL                       STM32_I2C1SEL_PCLK1
+#define STM32_I2C2SEL                       STM32_I2C2SEL_PCLK1
+#define STM32_I2C3SEL                       STM32_I2C3SEL_PCLK1
+#define STM32_I2C4SEL                       STM32_I2C4SEL_PCLK1
+#define STM32_LPTIM1SEL                     STM32_LPTIM1SEL_PCLK1
+#define STM32_CECSEL                        STM32_CECSEL_LSE
+#define STM32_CK48MSEL                      STM32_CK48MSEL_PLL
+#define STM32_SDMMCSEL                      STM32_SDMMCSEL_PLL48CLK
+#define STM32_SRAM2_NOCACHE                 FALSE
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_USE_CAN2                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+#define STM32_CAN_CAN2_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              FALSE
+#define STM32_DAC_USE_DAC1_CH2              FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH1_DMA_STREAM       STM32_DMA_STREAM_ID(1, 5)
+#define STM32_DAC_DAC1_CH2_DMA_STREAM       STM32_DMA_STREAM_ID(1, 6)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI22_IRQ_PRIORITY       15
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_USE_TIM9                  FALSE
+#define STM32_GPT_USE_TIM11                 FALSE
+#define STM32_GPT_USE_TIM12                 FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+#define STM32_GPT_TIM9_IRQ_PRIORITY         7
+#define STM32_GPT_TIM11_IRQ_PRIORITY        7
+#define STM32_GPT_TIM12_IRQ_PRIORITY        7
+#define STM32_GPT_TIM14_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_USE_I2C3                  FALSE
+#define STM32_I2C_USE_I2C4                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C4_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C4_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C3_IRQ_PRIORITY         5
+#define STM32_I2C_I2C4_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_I2C3_DMA_PRIORITY         3
+#define STM32_I2C_I2C4_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_USE_TIM9                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+#define STM32_ICU_TIM9_IRQ_PRIORITY         7
+
+/*
+ * MAC driver system settings.
+ */
+#define STM32_MAC_TRANSMIT_BUFFERS          2
+#define STM32_MAC_RECEIVE_BUFFERS           4
+#define STM32_MAC_BUFFERS_SIZE              1522
+#define STM32_MAC_PHY_TIMEOUT               100
+#define STM32_MAC_ETH1_CHANGE_PHY_STATE     TRUE
+#define STM32_MAC_ETH1_IRQ_PRIORITY         13
+#define STM32_MAC_IP_CHECKSUM_OFFLOAD       0
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_USE_TIM9                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+#define STM32_PWM_TIM9_IRQ_PRIORITY         7
+
+/*
+ * SDC driver system settings.
+ */
+#define STM32_SDC_USE_SDMMC1                TRUE
+#define STM32_SDC_SDMMC_UNALIGNED_SUPPORT   TRUE
+#define STM32_SDC_SDMMC_WRITE_TIMEOUT       250
+#define STM32_SDC_SDMMC_READ_TIMEOUT        25
+#define STM32_SDC_SDMMC_CLOCK_DELAY         10
+#define STM32_SDC_SDMMC1_DMA_STREAM         STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SDC_SDMMC1_DMA_PRIORITY       3
+#define STM32_SDC_SDMMC1_IRQ_PRIORITY       9
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             TRUE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USE_USART6             FALSE
+#define STM32_SERIAL_USE_UART7              FALSE
+#define STM32_SERIAL_USE_UART8              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+#define STM32_SERIAL_USART6_PRIORITY        12
+#define STM32_SERIAL_UART7_PRIORITY         12
+#define STM32_SERIAL_UART8_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_USE_SPI4                  FALSE
+#define STM32_SPI_USE_SPI5                  FALSE
+#define STM32_SPI_USE_SPI6                  FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI4_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI4_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 1)
+#define STM32_SPI_SPI5_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI5_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 4)
+#define STM32_SPI_SPI6_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 6)
+#define STM32_SPI_SPI6_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 5)
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI4_DMA_PRIORITY         1
+#define STM32_SPI_SPI5_DMA_PRIORITY         1
+#define STM32_SPI_SPI6_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_SPI4_IRQ_PRIORITY         10
+#define STM32_SPI_SPI5_IRQ_PRIORITY         10
+#define STM32_SPI_SPI6_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USE_UART4                FALSE
+#define STM32_UART_USE_UART5                FALSE
+#define STM32_UART_USE_USART6               FALSE
+#define STM32_UART_USE_UART7                FALSE
+#define STM32_UART_USE_UART8                FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART3_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 1)
+#define STM32_UART_USART3_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_UART7_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART7_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 1)
+#define STM32_UART_UART8_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_UART8_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_UART4_IRQ_PRIORITY       12
+#define STM32_UART_UART5_IRQ_PRIORITY       12
+#define STM32_UART_USART6_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_UART4_DMA_PRIORITY       0
+#define STM32_UART_UART5_DMA_PRIORITY       0
+#define STM32_UART_USART6_DMA_PRIORITY      0
+#define STM32_UART_UART7_DMA_PRIORITY       0
+#define STM32_UART_UART8_DMA_PRIORITY       0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1                  FALSE
+#define STM32_USB_USE_OTG2                  TRUE
+#define STM32_USB_OTG1_IRQ_PRIORITY         14
+#define STM32_USB_OTG2_IRQ_PRIORITY         14
+#define STM32_USB_OTG1_RX_FIFO_SIZE         512
+#define STM32_USB_OTG2_RX_FIFO_SIZE         1024
+#define STM32_USB_OTG_THREAD_PRIO           LOWPRIO
+#define STM32_USB_OTG_THREAD_STACK_SIZE     128
+#define STM32_USB_OTGFIFO_FILL_BASEPRI      0
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/readme.txt
new file mode 100644
index 0000000..0ab7ecf
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/readme.txt
@@ -0,0 +1,30 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 STM32F407.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an Olimex STM32-E407 board.
+
+** The Demo **
+
+The demo currently just flashes a LED using a thread and serves HTTP requests
+at address 192.168.1.10 on port 80.
+FatFs integrated using SDIO.
+The USB-FS port is used as USB-CDC and a command shell is ready to accepts
+commands there.
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/usbcfg.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/usbcfg.c
new file mode 100644
index 0000000..6622821
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/usbcfg.c
@@ -0,0 +1,336 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "hal.h"
+
+/* Virtual serial port over USB.*/
+SerialUSBDriver SDU2;
+
+/*
+ * Endpoints to be used for USBD2.
+ */
+#define USBD2_DATA_REQUEST_EP           1
+#define USBD2_DATA_AVAILABLE_EP         1
+#define USBD2_INTERRUPT_REQUEST_EP      2
+
+/*
+ * USB Device Descriptor.
+ */
+static const uint8_t vcom_device_descriptor_data[18] = {
+  USB_DESC_DEVICE       (0x0200,        /* bcdUSB (2.0).                    */
+                         0x02,          /* bDeviceClass (CDC).              */
+                         0x00,          /* bDeviceSubClass.                 */
+                         0x00,          /* bDeviceProtocol.                 */
+                         0x40,          /* bMaxPacketSize.                  */
+                         0x0483,        /* idVendor (ST).                   */
+                         0x5740,        /* idProduct.                       */
+                         0x0200,        /* bcdDevice.                       */
+                         1,             /* iManufacturer.                   */
+                         2,             /* iProduct.                        */
+                         3,             /* iSerialNumber.                   */
+                         1)             /* bNumConfigurations.              */
+};
+
+/*
+ * Device Descriptor wrapper.
+ */
+static const USBDescriptor vcom_device_descriptor = {
+  sizeof vcom_device_descriptor_data,
+  vcom_device_descriptor_data
+};
+
+/* Configuration Descriptor tree for a CDC.*/
+static const uint8_t vcom_configuration_descriptor_data[67] = {
+  /* Configuration Descriptor.*/
+  USB_DESC_CONFIGURATION(67,            /* wTotalLength.                    */
+                         0x02,          /* bNumInterfaces.                  */
+                         0x01,          /* bConfigurationValue.             */
+                         0,             /* iConfiguration.                  */
+                         0xC0,          /* bmAttributes (self powered).     */
+                         50),           /* bMaxPower (100mA).               */
+  /* Interface Descriptor.*/
+  USB_DESC_INTERFACE    (0x00,          /* bInterfaceNumber.                */
+                         0x00,          /* bAlternateSetting.               */
+                         0x01,          /* bNumEndpoints.                   */
+                         0x02,          /* bInterfaceClass (Communications
+                                           Interface Class, CDC section
+                                           4.2).                            */
+                         0x02,          /* bInterfaceSubClass (Abstract
+                                         Control Model, CDC section 4.3).   */
+                         0x01,          /* bInterfaceProtocol (AT commands,
+                                           CDC section 4.4).                */
+                         0),            /* iInterface.                      */
+  /* Header Functional Descriptor (CDC section 5.2.3).*/
+  USB_DESC_BYTE         (5),            /* bLength.                         */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x00),         /* bDescriptorSubtype (Header
+                                           Functional Descriptor.           */
+  USB_DESC_BCD          (0x0110),       /* bcdCDC.                          */
+  /* Call Management Functional Descriptor. */
+  USB_DESC_BYTE         (5),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x01),         /* bDescriptorSubtype (Call Management
+                                           Functional Descriptor).          */
+  USB_DESC_BYTE         (0x00),         /* bmCapabilities (D0+D1).          */
+  USB_DESC_BYTE         (0x01),         /* bDataInterface.                  */
+  /* ACM Functional Descriptor.*/
+  USB_DESC_BYTE         (4),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x02),         /* bDescriptorSubtype (Abstract
+                                           Control Management Descriptor).  */
+  USB_DESC_BYTE         (0x02),         /* bmCapabilities.                  */
+  /* Union Functional Descriptor.*/
+  USB_DESC_BYTE         (5),            /* bFunctionLength.                 */
+  USB_DESC_BYTE         (0x24),         /* bDescriptorType (CS_INTERFACE).  */
+  USB_DESC_BYTE         (0x06),         /* bDescriptorSubtype (Union
+                                           Functional Descriptor).          */
+  USB_DESC_BYTE         (0x00),         /* bMasterInterface (Communication
+                                           Class Interface).                */
+  USB_DESC_BYTE         (0x01),         /* bSlaveInterface0 (Data Class
+                                           Interface).                      */
+  /* Endpoint 2 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD2_INTERRUPT_REQUEST_EP|0x80,
+                         0x03,          /* bmAttributes (Interrupt).        */
+                         0x0008,        /* wMaxPacketSize.                  */
+                         0xFF),         /* bInterval.                       */
+  /* Interface Descriptor.*/
+  USB_DESC_INTERFACE    (0x01,          /* bInterfaceNumber.                */
+                         0x00,          /* bAlternateSetting.               */
+                         0x02,          /* bNumEndpoints.                   */
+                         0x0A,          /* bInterfaceClass (Data Class
+                                           Interface, CDC section 4.5).     */
+                         0x00,          /* bInterfaceSubClass (CDC section
+                                           4.6).                            */
+                         0x00,          /* bInterfaceProtocol (CDC section
+                                           4.7).                            */
+                         0x00),         /* iInterface.                      */
+  /* Endpoint 3 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD2_DATA_AVAILABLE_EP,       /* bEndpointAddress.*/
+                         0x02,          /* bmAttributes (Bulk).             */
+                         0x0040,        /* wMaxPacketSize.                  */
+                         0x00),         /* bInterval.                       */
+  /* Endpoint 1 Descriptor.*/
+  USB_DESC_ENDPOINT     (USBD2_DATA_REQUEST_EP|0x80,    /* bEndpointAddress.*/
+                         0x02,          /* bmAttributes (Bulk).             */
+                         0x0040,        /* wMaxPacketSize.                  */
+                         0x00)          /* bInterval.                       */
+};
+
+/*
+ * Configuration Descriptor wrapper.
+ */
+static const USBDescriptor vcom_configuration_descriptor = {
+  sizeof vcom_configuration_descriptor_data,
+  vcom_configuration_descriptor_data
+};
+
+/*
+ * U.S. English language identifier.
+ */
+static const uint8_t vcom_string0[] = {
+  USB_DESC_BYTE(4),                     /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  USB_DESC_WORD(0x0409)                 /* wLANGID (U.S. English).          */
+};
+
+/*
+ * Vendor string.
+ */
+static const uint8_t vcom_string1[] = {
+  USB_DESC_BYTE(38),                    /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0,
+  'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0,
+  'c', 0, 's', 0
+};
+
+/*
+ * Device Description string.
+ */
+static const uint8_t vcom_string2[] = {
+  USB_DESC_BYTE(56),                    /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0,
+  'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0,
+  'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0,
+  'o', 0, 'r', 0, 't', 0
+};
+
+/*
+ * Serial Number string.
+ */
+static const uint8_t vcom_string3[] = {
+  USB_DESC_BYTE(8),                     /* bLength.                         */
+  USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType.                 */
+  '0' + CH_KERNEL_MAJOR, 0,
+  '0' + CH_KERNEL_MINOR, 0,
+  '0' + CH_KERNEL_PATCH, 0
+};
+
+/*
+ * Strings wrappers array.
+ */
+static const USBDescriptor vcom_strings[] = {
+  {sizeof vcom_string0, vcom_string0},
+  {sizeof vcom_string1, vcom_string1},
+  {sizeof vcom_string2, vcom_string2},
+  {sizeof vcom_string3, vcom_string3}
+};
+
+/*
+ * Handles the GET_DESCRIPTOR callback. All required descriptors must be
+ * handled here.
+ */
+static const USBDescriptor *get_descriptor(USBDriver *usbp,
+                                           uint8_t dtype,
+                                           uint8_t dindex,
+                                           uint16_t lang) {
+
+  (void)usbp;
+  (void)lang;
+  switch (dtype) {
+  case USB_DESCRIPTOR_DEVICE:
+    return &vcom_device_descriptor;
+  case USB_DESCRIPTOR_CONFIGURATION:
+    return &vcom_configuration_descriptor;
+  case USB_DESCRIPTOR_STRING:
+    if (dindex < 4)
+      return &vcom_strings[dindex];
+  }
+  return NULL;
+}
+
+/**
+ * @brief   IN EP1 state.
+ */
+static USBInEndpointState ep1instate;
+
+/**
+ * @brief   OUT EP1 state.
+ */
+static USBOutEndpointState ep1outstate;
+
+/**
+ * @brief   EP1 initialization structure (both IN and OUT).
+ */
+static const USBEndpointConfig ep1config = {
+  USB_EP_MODE_TYPE_BULK,
+  NULL,
+  sduDataTransmitted,
+  sduDataReceived,
+  0x0040,
+  0x0040,
+  &ep1instate,
+  &ep1outstate,
+  4,
+  NULL
+};
+
+/**
+ * @brief   IN EP2 state.
+ */
+static USBInEndpointState ep2instate;
+
+/**
+ * @brief   EP2 initialization structure (IN only).
+ */
+static const USBEndpointConfig ep2config = {
+  USB_EP_MODE_TYPE_INTR,
+  NULL,
+  sduInterruptTransmitted,
+  NULL,
+  0x0010,
+  0x0000,
+  &ep2instate,
+  NULL,
+  1,
+  NULL
+};
+
+/*
+ * Handles the USB driver global events.
+ */
+static void usb_event(USBDriver *usbp, usbevent_t event) {
+  extern SerialUSBDriver SDU2;
+
+  switch (event) {
+  case USB_EVENT_RESET:
+    return;
+  case USB_EVENT_ADDRESS:
+    return;
+  case USB_EVENT_CONFIGURED:
+    chSysLockFromISR();
+
+    /* Enables the endpoints specified into the configuration.
+       Note, this callback is invoked from an ISR so I-Class functions
+       must be used.*/
+    usbInitEndpointI(usbp, USBD2_DATA_REQUEST_EP, &ep1config);
+    usbInitEndpointI(usbp, USBD2_INTERRUPT_REQUEST_EP, &ep2config);
+
+    /* Resetting the state of the CDC subsystem.*/
+    sduConfigureHookI(&SDU2);
+
+    chSysUnlockFromISR();
+    return;
+  case USB_EVENT_UNCONFIGURED:
+    return;
+  case USB_EVENT_SUSPEND:
+    chSysLockFromISR();
+
+    /* Disconnection event on suspend.*/
+    sduDisconnectI(&SDU2);
+
+    chSysUnlockFromISR();
+    return;
+  case USB_EVENT_WAKEUP:
+    return;
+  case USB_EVENT_STALLED:
+    return;
+  }
+  return;
+}
+
+/*
+ * Handles the USB driver global events.
+ */
+static void sof_handler(USBDriver *usbp) {
+
+  (void)usbp;
+
+  osalSysLockFromISR();
+  sduSOFHookI(&SDU2);
+  osalSysUnlockFromISR();
+}
+
+/*
+ * USB driver configuration.
+ */
+const USBConfig usbcfg = {
+  usb_event,
+  get_descriptor,
+  sduRequestsHook,
+  sof_handler
+};
+
+/*
+ * Serial over USB driver configuration.
+ */
+const SerialUSBConfig serusbcfg = {
+  &USBD2,
+  USBD2_DATA_REQUEST_EP,
+  USBD2_DATA_AVAILABLE_EP,
+  USBD2_INTERRUPT_REQUEST_EP
+};
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/usbcfg.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/usbcfg.h
new file mode 100644
index 0000000..333a5f9
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/usbcfg.h
@@ -0,0 +1,26 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _USBCFG_H_
+#define _USBCFG_H_
+
+extern const USBConfig usbcfg;
+extern SerialUSBConfig serusbcfg;
+extern SerialUSBDriver SDU2;
+
+#endif  /* _USBCFG_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/web/web.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/web/web.c
new file mode 100644
index 0000000..c0e717b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/web/web.c
@@ -0,0 +1,203 @@
+/*
+    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/*
+ * This file is a modified version of the lwIP web server demo. The original
+ * author is unknown because the file didn't contain any license information.
+ */
+
+/**
+ * @file web.c
+ * @brief HTTP server wrapper thread code.
+ * @addtogroup WEB_THREAD
+ * @{
+ */
+
+#include <ctype.h>
+
+#include "ch.h"
+
+#include "lwip/opt.h"
+#include "lwip/arch.h"
+#include "lwip/api.h"
+
+#include "web.h"
+
+#if LWIP_NETCONN
+
+static char url_buffer[WEB_MAX_PATH_SIZE];
+
+#define HEXTOI(x) (isdigit(x) ? (x) - '0' : (x) - 'a' + 10)
+
+/**
+ * @brief   Decodes an URL sting.
+ * @note    The string is terminated by a zero or a separator.
+ *
+ * @param[in] url       encoded URL string
+ * @param[out] buf      buffer for the processed string
+ * @param[in] max       max number of chars to copy into the buffer
+ * @return              The conversion status.
+ * @retval false        string converted.
+ * @retval true         the string was not valid or the buffer overflowed
+ *
+ * @notapi
+ */
+static bool decode_url(const char *url, char *buf, size_t max) {
+
+  while (true) {
+    int h, l;
+    unsigned c = *url++;
+
+    switch (c) {
+    case 0:
+    case '\r':
+    case '\n':
+    case '\t':
+    case ' ':
+    case '?':
+      *buf = 0;
+      return false;
+    case '.':
+      if (max <= 1)
+        return true;
+
+      h = *(url + 1);
+      if (h == '.')
+        return true;
+
+      break;
+    case '%':
+      if (max <= 1)
+        return true;
+
+      h = tolower((int)*url++);
+      if (h == 0)
+        return true;
+      if (!isxdigit(h))
+        return true;
+
+      l = tolower((int)*url++);
+      if (l == 0)
+        return true;
+      if (!isxdigit(l))
+        return true;
+
+      c = (char)((HEXTOI(h) << 4) | HEXTOI(l));
+      break;
+    default:
+      if (max <= 1)
+        return true;
+
+      if (!isalnum(c) && (c != '_') && (c != '-') && (c != '+') &&
+          (c != '/'))
+        return true;
+
+      break;
+    }
+
+    *buf++ = c;
+    max--;
+  }
+}
+
+static const char http_html_hdr[] = "HTTP/1.1 200 OK\r\nContent-type: text/html\r\n\r\n";
+static const char http_index_html[] = "<html><head><title>Congrats!</title></head><body><h1>Welcome to our lwIP HTTP server!</h1><p>This is a small test page.</body></html>";
+
+static void http_server_serve(struct netconn *conn) {
+  struct netbuf *inbuf;
+  char *buf;
+  u16_t buflen;
+  err_t err;
+
+  /* Read the data from the port, blocking if nothing yet there.
+     We assume the request (the part we care about) is in one netbuf.*/
+  err = netconn_recv(conn, &inbuf);
+
+  if (err == ERR_OK) {
+    netbuf_data(inbuf, (void **)&buf, &buflen);
+
+    /* Is this an HTTP GET command? (only check the first 5 chars, since
+       there are other formats for GET, and we're keeping it very simple ).*/
+    if (buflen >= 5 &&
+        buf[0] == 'G' &&
+        buf[1] == 'E' &&
+        buf[2] == 'T' &&
+        buf[3] == ' ' &&
+        buf[4] == '/') {
+
+      if (decode_url(buf + 4, url_buffer, WEB_MAX_PATH_SIZE)) {
+        /* Invalid URL handling.*/
+        return;
+      }
+
+      /* Send the HTML header
+             * subtract 1 from the size, since we dont send the \0 in the string
+             * NETCONN_NOCOPY: our data is const static, so no need to copy it
+       */
+      netconn_write(conn, http_html_hdr, sizeof(http_html_hdr)-1, NETCONN_NOCOPY);
+
+      /* Send our HTML page */
+      netconn_write(conn, http_index_html, sizeof(http_index_html)-1, NETCONN_NOCOPY);
+    }
+  }
+  /* Close the connection (server closes in HTTP) */
+  netconn_close(conn);
+
+  /* Delete the buffer (netconn_recv gives us ownership,
+   so we have to make sure to deallocate the buffer) */
+  netbuf_delete(inbuf);
+}
+
+/**
+ * @brief   Stack area for the http thread.
+ */
+THD_WORKING_AREA(wa_http_server, WEB_THREAD_STACK_SIZE);
+
+/**
+ * @brief   HTTP server thread.
+ */
+THD_FUNCTION(http_server, p) {
+  struct netconn *conn, *newconn;
+  err_t err;
+
+  (void)p;
+  chRegSetThreadName("http");
+
+  /* Create a new TCP connection handle */
+  conn = netconn_new(NETCONN_TCP);
+  LWIP_ERROR("http_server: invalid conn", (conn != NULL), chThdExit(MSG_RESET););
+
+  /* Bind to port 80 (HTTP) with default IP address */
+  netconn_bind(conn, NULL, WEB_THREAD_PORT);
+
+  /* Put the connection into LISTEN state */
+  netconn_listen(conn);
+
+  /* Goes to the final priority after initialization.*/
+  chThdSetPriority(WEB_THREAD_PRIORITY);
+
+  while (true) {
+    err = netconn_accept(conn, &newconn);
+    if (err != ERR_OK)
+      continue;
+    http_server_serve(newconn);
+    netconn_delete(newconn);
+  }
+}
+
+#endif /* LWIP_NETCONN */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/web/web.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/web/web.h
new file mode 100644
index 0000000..946576b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY-LWIP-FATFS-USB/web/web.h
@@ -0,0 +1,55 @@
+/*
+    ChibiOS/RT - Copyright (C) 2006-2013 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file web.h
+ * @brief HTTP server wrapper thread macros and structures.
+ * @addtogroup WEB_THREAD
+ * @{
+ */
+
+#ifndef _WEB_H_
+#define _WEB_H_
+
+#if !defined(WEB_THREAD_STACK_SIZE)
+#define WEB_THREAD_STACK_SIZE           1024
+#endif
+
+#if !defined(WEB_THREAD_PORT)
+#define WEB_THREAD_PORT                 80
+#endif
+
+#if !defined(WEB_THREAD_PRIORITY)
+#define WEB_THREAD_PRIORITY             (LOWPRIO + 2)
+#endif
+
+#if !defined(WEB_MAX_PATH_SIZE)
+#define WEB_MAX_PATH_SIZE               128
+#endif
+
+extern THD_WORKING_AREA(wa_http_server, WEB_THREAD_STACK_SIZE);
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+  THD_FUNCTION(http_server, p);
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _WEB_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/.cproject
new file mode 100644
index 0000000..5c4623c
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/.cproject
@@ -0,0 +1,50 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.114656749">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.114656749." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32F746G-DISCOVERY.null.1703860681" name="RT-STM32F746G-DISCOVERY"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.114656749">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/.project
new file mode 100644
index 0000000..119e68a
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/.project
@@ -0,0 +1,95 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32F746G-DISCOVERY</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value>-j1</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>true</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32F746G_DISCOVERY</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/Makefile
new file mode 100644
index 0000000..3d6f7ee
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f7xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32F7xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32F746G_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F746xG.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/chconf.h
new file mode 100644
index 0000000..fe1c8d3
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/chconf.h
@@ -0,0 +1,501 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#define CORTEX_VTOR_INIT                    0x00200000U
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/debug/RT-STM32F746G-DISCOVERY (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/debug/RT-STM32F746G-DISCOVERY (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..05650c1
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/debug/RT-STM32F746G-DISCOVERY (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F746G-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList&gt;&#13;&#10;&lt;memoryBlockExpressionItem&gt;&#13;&#10;&lt;expression text=&quot;0x0&quot;/&gt;&#13;&#10;&lt;/memoryBlockExpressionItem&gt;&#13;&#10;&lt;/memoryBlockExpressionList&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F746G-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F746G-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/debug/RT-STM32F746G-DISCOVERY (OpenOCD, Just Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/debug/RT-STM32F746G-DISCOVERY (OpenOCD, Just Run).launch
new file mode 100644
index 0000000..3e12199
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/debug/RT-STM32F746G-DISCOVERY (OpenOCD, Just Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32F746G-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="0"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList&gt;&lt;content id=&quot;vt_delta-null-chVTDoSetI-(format)&quot; val=&quot;4&quot;/&gt;&lt;content id=&quot;r3-(format)&quot; val=&quot;4&quot;/&gt;&lt;/contentList&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32F746G-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32F746G-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/main.c
new file mode 100644
index 0000000..eea6da0
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/main.c
@@ -0,0 +1,78 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * This is a periodic thread that does absolutely nothing except flashing
+ * a LED.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palSetLine(LINE_ARD_D13);
+    chThdSleepMilliseconds(500);
+    palClearLine(LINE_ARD_D13);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * GPIOI1 is programmed as output (board LED).
+   */
+  palClearLine(LINE_ARD_D13);
+  palSetLineMode(LINE_ARD_D13, PAL_MODE_OUTPUT_PUSHPULL);
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   */
+  sdStart(&SD1, NULL);
+
+  /*
+   * Creates the example thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (palReadPad(GPIOI, GPIOI_BUTTON_USER))
+      TestThread(&SD1);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/mcuconf.h
new file mode 100644
index 0000000..a84c811
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/mcuconf.h
@@ -0,0 +1,386 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32F4xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32F7xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_BKPRAM_ENABLE                 FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   FALSE
+#define STM32_HSE_ENABLED                   TRUE
+#define STM32_LSE_ENABLED                   TRUE
+#define STM32_CLOCK48_REQUIRED              TRUE
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSE
+#define STM32_PLLM_VALUE                    25
+#define STM32_PLLN_VALUE                    432
+#define STM32_PLLP_VALUE                    2
+#define STM32_PLLQ_VALUE                    9
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV4
+#define STM32_PPRE2                         STM32_PPRE2_DIV2
+#define STM32_RTCSEL                        STM32_RTCSEL_LSE
+#define STM32_RTCPRE_VALUE                  25
+#define STM32_MCO1SEL                       STM32_MCO1SEL_HSI
+#define STM32_MCO1PRE                       STM32_MCO1PRE_DIV1
+#define STM32_MCO2SEL                       STM32_MCO2SEL_SYSCLK
+#define STM32_MCO2PRE                       STM32_MCO2PRE_DIV4
+#define STM32_I2SSRC                        STM32_I2SSRC_PLLI2S
+#define STM32_PLLI2SN_VALUE                 192
+#define STM32_PLLI2SP_VALUE                 4
+#define STM32_PLLI2SQ_VALUE                 4
+#define STM32_PLLI2SR_VALUE                 4
+#define STM32_PLLSAIN_VALUE                 192
+#define STM32_PLLSAIP_VALUE                 4
+#define STM32_PLLSAIQ_VALUE                 4
+#define STM32_PLLSAIR_VALUE                 4
+#define STM32_PLLSAIDIVR                    STM32_PLLSAIDIVR_OFF
+#define STM32_SAI1SEL                       STM32_SAI1SEL_OFF
+#define STM32_SAI2SEL                       STM32_SAI2SEL_OFF
+#define STM32_USART1SEL                     STM32_USART1SEL_PCLK2
+#define STM32_USART2SEL                     STM32_USART2SEL_PCLK1
+#define STM32_USART3SEL                     STM32_USART3SEL_PCLK1
+#define STM32_UART4SEL                      STM32_UART4SEL_PCLK1
+#define STM32_UART5SEL                      STM32_UART5SEL_PCLK1
+#define STM32_USART6SEL                     STM32_USART6SEL_PCLK2
+#define STM32_UART7SEL                      STM32_UART7SEL_PCLK1
+#define STM32_UART8SEL                      STM32_UART8SEL_PCLK1
+#define STM32_I2C1SEL                       STM32_I2C1SEL_PCLK1
+#define STM32_I2C2SEL                       STM32_I2C2SEL_PCLK1
+#define STM32_I2C3SEL                       STM32_I2C3SEL_PCLK1
+#define STM32_I2C4SEL                       STM32_I2C4SEL_PCLK1
+#define STM32_LPTIM1SEL                     STM32_LPTIM1SEL_PCLK1
+#define STM32_CECSEL                        STM32_CECSEL_LSE
+#define STM32_CK48MSEL                      STM32_CK48MSEL_PLL
+#define STM32_SDMMCSEL                      STM32_SDMMCSEL_PLL48CLK
+#define STM32_SRAM2_NOCACHE                 FALSE
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_ADCPRE                    ADC_CCR_ADCPRE_DIV4
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(2, 4)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(2, 2)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(2, 1)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     6
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     6
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_USE_CAN2                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+#define STM32_CAN_CAN2_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              FALSE
+#define STM32_DAC_USE_DAC1_CH2              FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH1_DMA_STREAM       STM32_DMA_STREAM_ID(1, 5)
+#define STM32_DAC_DAC1_CH2_DMA_STREAM       STM32_DMA_STREAM_ID(1, 6)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_IRQ_PRIORITY       15
+#define STM32_EXT_EXTI22_IRQ_PRIORITY       15
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_USE_TIM9                  FALSE
+#define STM32_GPT_USE_TIM11                 FALSE
+#define STM32_GPT_USE_TIM12                 FALSE
+#define STM32_GPT_USE_TIM14                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+#define STM32_GPT_TIM9_IRQ_PRIORITY         7
+#define STM32_GPT_TIM11_IRQ_PRIORITY        7
+#define STM32_GPT_TIM12_IRQ_PRIORITY        7
+#define STM32_GPT_TIM14_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_USE_I2C3                  FALSE
+#define STM32_I2C_USE_I2C4                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C4_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C4_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C3_IRQ_PRIORITY         5
+#define STM32_I2C_I2C4_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_I2C3_DMA_PRIORITY         3
+#define STM32_I2C_I2C4_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_USE_TIM9                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+#define STM32_ICU_TIM9_IRQ_PRIORITY         7
+
+/*
+ * MAC driver system settings.
+ */
+#define STM32_MAC_TRANSMIT_BUFFERS          2
+#define STM32_MAC_RECEIVE_BUFFERS           4
+#define STM32_MAC_BUFFERS_SIZE              1522
+#define STM32_MAC_PHY_TIMEOUT               100
+#define STM32_MAC_ETH1_CHANGE_PHY_STATE     TRUE
+#define STM32_MAC_ETH1_IRQ_PRIORITY         13
+#define STM32_MAC_IP_CHECKSUM_OFFLOAD       0
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_USE_TIM9                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+#define STM32_PWM_TIM9_IRQ_PRIORITY         7
+
+/*
+ * SDC driver system settings.
+ */
+#define STM32_SDC_USE_SDMMC1                FALSE
+#define STM32_SDC_SDMMC_UNALIGNED_SUPPORT   TRUE
+#define STM32_SDC_SDMMC_WRITE_TIMEOUT       250
+#define STM32_SDC_SDMMC_READ_TIMEOUT        25
+#define STM32_SDC_SDMMC_CLOCK_DELAY         10
+#define STM32_SDC_SDMMC1_DMA_STREAM         STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SDC_SDMMC1_DMA_PRIORITY       3
+#define STM32_SDC_SDMMC1_IRQ_PRIORITY       9
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             TRUE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_UART4              FALSE
+#define STM32_SERIAL_USE_UART5              FALSE
+#define STM32_SERIAL_USE_USART6             FALSE
+#define STM32_SERIAL_USE_UART7              FALSE
+#define STM32_SERIAL_USE_UART8              FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_UART4_PRIORITY         12
+#define STM32_SERIAL_UART5_PRIORITY         12
+#define STM32_SERIAL_USART6_PRIORITY        12
+#define STM32_SERIAL_UART7_PRIORITY         12
+#define STM32_SERIAL_UART8_PRIORITY         12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_USE_SPI4                  FALSE
+#define STM32_SPI_USE_SPI5                  FALSE
+#define STM32_SPI_USE_SPI6                  FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 0)
+#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_SPI_SPI4_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 0)
+#define STM32_SPI_SPI4_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 1)
+#define STM32_SPI_SPI5_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI5_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 4)
+#define STM32_SPI_SPI6_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 6)
+#define STM32_SPI_SPI6_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 5)
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI4_DMA_PRIORITY         1
+#define STM32_SPI_SPI5_DMA_PRIORITY         1
+#define STM32_SPI_SPI6_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_SPI4_IRQ_PRIORITY         10
+#define STM32_SPI_SPI5_IRQ_PRIORITY         10
+#define STM32_SPI_SPI6_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USE_UART4                FALSE
+#define STM32_UART_USE_UART5                FALSE
+#define STM32_UART_USE_USART6               FALSE
+#define STM32_UART_USE_UART7                FALSE
+#define STM32_UART_USE_UART8                FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART3_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 1)
+#define STM32_UART_USART3_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART4_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_UART5_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_UART5_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_USART6_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_USART6_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_UART7_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_UART7_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 1)
+#define STM32_UART_UART8_RX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_UART8_TX_DMA_STREAM      STM32_DMA_STREAM_ID(1, 0)
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_UART4_IRQ_PRIORITY       12
+#define STM32_UART_UART5_IRQ_PRIORITY       12
+#define STM32_UART_USART6_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_UART4_DMA_PRIORITY       0
+#define STM32_UART_UART5_DMA_PRIORITY       0
+#define STM32_UART_USART6_DMA_PRIORITY      0
+#define STM32_UART_UART7_DMA_PRIORITY       0
+#define STM32_UART_UART8_DMA_PRIORITY       0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1                  FALSE
+#define STM32_USB_USE_OTG2                  FALSE
+#define STM32_USB_OTG1_IRQ_PRIORITY         14
+#define STM32_USB_OTG2_IRQ_PRIORITY         14
+#define STM32_USB_OTG1_RX_FIFO_SIZE         512
+#define STM32_USB_OTG2_RX_FIFO_SIZE         1024
+#define STM32_USB_OTG_THREAD_PRIO           LOWPRIO
+#define STM32_USB_OTG_THREAD_STACK_SIZE     128
+#define STM32_USB_OTGFIFO_FILL_BASEPRI      0
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/readme.txt
new file mode 100644
index 0000000..3b24d2e
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32F746G-DISCOVERY/readme.txt
@@ -0,0 +1,25 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M7 STM32F746G.                           **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST STM32F746G-Discovery board.
+
+** The Demo **
+
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO. just modify the TRGT line in the makefile in order to use
+different GCC toolchains.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/.cproject
new file mode 100644
index 0000000..ea504de
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/.cproject
@@ -0,0 +1,54 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.603687198">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.603687198" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.603687198" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.603687198." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963.1446538340" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1490952991" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1134067298" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1927705259" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1013764026" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1367371861" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1824820452" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1584496456" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1781547795" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32L053R8-NUCLEO.null.1004513353" name="RT-STM32L053R8-NUCLEO"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.603687198">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32L053R8-NUCLEO"/>
+		</configuration>
+	</storageModule>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/.project
new file mode 100644
index 0000000..2ded2ea
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32L053R8-NUCLEO</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_NUCLEO_L053R8</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/Makefile
new file mode 100644
index 0000000..31e7868
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32l0xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32L0xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_NUCLEO_L053R8/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32L053x8.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m0
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/chconf.h
new file mode 100644
index 0000000..3efdfc6
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                16
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/debug/RT-STM32L053R8-NUCLEO (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/debug/RT-STM32L053R8-NUCLEO (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..9a79269
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/debug/RT-STM32L053R8-NUCLEO (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32L053R8-NUCLEO\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32L053R8-NUCLEO"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.603687198"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32L053R8-NUCLEO"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/main.c
new file mode 100644
index 0000000..bd50f19
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/main.c
@@ -0,0 +1,71 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * Red LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palClearPad(GPIOA, GPIOA_LED_GREEN);
+    chThdSleepMilliseconds(500);
+    palSetPad(GPIOA, GPIOA_LED_GREEN);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 2 using the driver default configuration.
+   */
+  sdStart(&SD2, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (!palReadPad(GPIOC, GPIOC_BUTTON))
+      TestThread(&SD2);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/mcuconf.h
new file mode 100644
index 0000000..8388470
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/mcuconf.h
@@ -0,0 +1,176 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32L1xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32L0xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_VOS                           STM32_VOS_1P8
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI16_ENABLED                 TRUE
+#define STM32_LSI_ENABLED                   FALSE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   TRUE
+#define STM32_ADC_CLOCK_ENABLED             TRUE
+#define STM32_USB_CLOCK_ENABLED             TRUE
+#define STM32_MSIRANGE                      STM32_MSIRANGE_2M
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI16
+#define STM32_PLLMUL_VALUE                  4
+#define STM32_PLLDIV_VALUE                  2
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV1
+#define STM32_PPRE2                         STM32_PPRE2_DIV1
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE                        STM32_MCOPRE_DIV1
+#define STM32_RTCSEL                        STM32_RTCSEL_LSE
+#define STM32_RTCPRE                        STM32_RTCPRE_DIV2
+#define STM32_USART1SEL                     STM32_USART1SEL_APB
+#define STM32_USART2SEL                     STM32_USART2SEL_APB
+#define STM32_LPUART1SEL                    STM32_LPUART1SEL_APB
+#define STM32_I2C1SEL                       STM32_I2C1SEL_APB
+#define STM32_LPTIM1SEL                     STM32_LPTIM1SEL_APB
+#define STM32_HSI48SEL                      STM32_HSI48SEL_HSI48
+
+/*
+ * ADC driver system settings.
+ * Note, IRQ is shared with EXT channels 21 and 22.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_CKMODE               STM32_ADC_CKMODE_ADCCLK
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     2
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_PRESCALER_VALUE           1
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_1_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI2_3_IRQ_PRIORITY      3
+#define STM32_EXT_EXTI4_15_IRQ_PRIORITY     3
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       3
+#define STM32_EXT_EXTI17_20_IRQ_PRIORITY    3
+#define STM32_EXT_EXTI21_22_IRQ_PRIORITY    3
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_TIM2_IRQ_PRIORITY         2
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         3
+#define STM32_I2C_I2C2_IRQ_PRIORITY         3
+#define STM32_I2C_USE_DMA                   TRUE
+#define STM32_I2C_I2C1_DMA_PRIORITY         1
+#define STM32_I2C_I2C2_DMA_PRIORITY         1
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_TIM2_IRQ_PRIORITY         3
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_TIM2_IRQ_PRIORITY         3
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_LPUART1            FALSE
+#define STM32_SERIAL_USART1_PRIORITY        3
+#define STM32_SERIAL_USART2_PRIORITY        3
+#define STM32_SERIAL_LPUART1_PRIORITY       3
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         1
+#define STM32_SPI_SPI2_IRQ_PRIORITY         1
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               2
+#define STM32_ST_USE_TIMER                  21
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      3
+#define STM32_UART_USART2_IRQ_PRIORITY      3
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 5)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 4)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/readme.txt
new file mode 100644
index 0000000..cf22fb8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L053R8-NUCLEO/readme.txt
@@ -0,0 +1,28 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M0 STM32L053.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST_NUCLEO_L053R8 board.
+
+** The Demo **
+
+The demo flashes the board LED using a thread, by pressing the button located
+on the board the test procedure is activated with output on the serial port
+SD2 (USART2, mapped on USB virtual COM port).
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/.cproject
new file mode 100644
index 0000000..c6cf543
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/.cproject
@@ -0,0 +1,54 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.1984968159">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.1984968159" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.1984968159" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.1984968159." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.688272362" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.688272362.270307390" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1075495684" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1667039593" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1490155624" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1745864609" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1771767067" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.232441590" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1677220503" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.2124347918" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32L152-DISCOVERY.null.1212300359" name="RT-STM32L152-DISCOVERY"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.1984968159">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32L152-DISCOVERY"/>
+		</configuration>
+	</storageModule>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/.project
new file mode 100644
index 0000000..1ed8513
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/.project
@@ -0,0 +1,38 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32L152-DISCOVERY</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/Makefile
new file mode 100644
index 0000000..6e635fa
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32l1xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32L_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32L152xB.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m3
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/chconf.h
new file mode 100644
index 0000000..8c745aa
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                16
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/debug/RT-STM32L152-DISCOVERY (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/debug/RT-STM32L152-DISCOVERY (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..1ca8502
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/debug/RT-STM32L152-DISCOVERY (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32L152-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32L152-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32L152-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/main.c
new file mode 100644
index 0000000..86e1912
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/main.c
@@ -0,0 +1,94 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * Blinker thread #1.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+
+  chRegSetThreadName("blinker");
+  while (true) {
+    palSetPad(GPIOB, GPIOB_LED4);
+    chThdSleepMilliseconds(250);
+    palClearPad(GPIOB, GPIOB_LED4);
+    chThdSleepMilliseconds(250);
+  }
+}
+
+/*
+ * Blinker thread #2.
+ */
+static THD_WORKING_AREA(waThread2, 128);
+static THD_FUNCTION(Thread2, arg) {
+
+  (void)arg;
+
+  chRegSetThreadName("blinker");
+  while (true) {
+    palSetPad(GPIOB, GPIOB_LED3);
+    chThdSleepMilliseconds(500);
+    palClearPad(GPIOB, GPIOB_LED3);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 1 using the driver default configuration.
+   * PA9(TX) and PA10(RX) are routed to USART1.
+   */
+  sdStart(&SD1, NULL);
+  palSetPadMode(GPIOA, 9, PAL_MODE_ALTERNATE(7));
+  palSetPadMode(GPIOA, 10, PAL_MODE_ALTERNATE(7));
+
+  /*
+   * Creates the example threads.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO+1, Thread1, NULL);
+  chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO+1, Thread2, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state, when the button is
+   * pressed the test procedure is launched.
+   */
+  while (true) {
+    if (palReadPad(GPIOA, GPIOA_BUTTON))
+      TestThread(&SD1);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/mcuconf.h
new file mode 100644
index 0000000..462fa03
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/mcuconf.h
@@ -0,0 +1,206 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32L1xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32L1xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   TRUE
+#define STM32_ADC_CLOCK_ENABLED             TRUE
+#define STM32_USB_CLOCK_ENABLED             TRUE
+#define STM32_MSIRANGE                      STM32_MSIRANGE_2M
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI
+#define STM32_PLLMUL_VALUE                  6
+#define STM32_PLLDIV_VALUE                  3
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV1
+#define STM32_PPRE2                         STM32_PPRE2_DIV1
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE                        STM32_MCOPRE_DIV1
+#define STM32_RTCSEL                        STM32_RTCSEL_LSE
+#define STM32_RTCPRE                        STM32_RTCPRE_DIV2
+#define STM32_VOS                           STM32_VOS_1P8
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  TRUE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              FALSE
+#define STM32_DAC_USE_DAC1_CH2              FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_22_IRQ_PRIORITY    6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM9                  FALSE
+#define STM32_GPT_USE_TIM11                 FALSE
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM9_IRQ_PRIORITY         7
+#define STM32_GPT_TIM11_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM9                  FALSE
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM9_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  TRUE
+#define STM32_PWM_USE_TIM9                  FALSE
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM9_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             TRUE
+#define STM32_SERIAL_USE_USART2             FALSE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  TRUE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  TRUE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/readme.txt
new file mode 100644
index 0000000..9321355
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152-DISCOVERY/readme.txt
@@ -0,0 +1,25 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M3 STM32L152.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST STM32L-Discovery board.
+
+** The Demo **
+
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO. just modify the TRGT line in the makefile in order to use
+different GCC toolchains.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/.cproject
new file mode 100644
index 0000000..a7654a1
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/.cproject
@@ -0,0 +1,54 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.603687198">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.603687198" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.603687198" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.603687198." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963.1446538340" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1490952991" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1134067298" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1927705259" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1013764026" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1367371861" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1824820452" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1584496456" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1781547795" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32L152RE-NUCLEO.null.1004513353" name="RT-STM32L152RE-NUCLEO"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.603687198">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32L152RE-NUCLEO"/>
+		</configuration>
+	</storageModule>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/.project
new file mode 100644
index 0000000..5747a0d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32L152RE-NUCLEO</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_NUCLEO_L152RE</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/Makefile
new file mode 100644
index 0000000..dc8541d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32l1xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32L1xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_NUCLEO_L152RE/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32L152xE.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m3
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/chconf.h
new file mode 100644
index 0000000..7d99062
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/debug/RT-STM32L152RE-NUCLEO (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/debug/RT-STM32L152RE-NUCLEO (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..d9563e4
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/debug/RT-STM32L152RE-NUCLEO (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32L152RE-NUCLEO\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32L152RE-NUCLEO"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32L152RE-NUCLEO"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/main.c
new file mode 100644
index 0000000..bd50f19
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/main.c
@@ -0,0 +1,71 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * Red LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palClearPad(GPIOA, GPIOA_LED_GREEN);
+    chThdSleepMilliseconds(500);
+    palSetPad(GPIOA, GPIOA_LED_GREEN);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 2 using the driver default configuration.
+   */
+  sdStart(&SD2, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (!palReadPad(GPIOC, GPIOC_BUTTON))
+      TestThread(&SD2);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/mcuconf.h
new file mode 100644
index 0000000..8e313d8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/mcuconf.h
@@ -0,0 +1,208 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32L1xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32L1xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_HSI_ENABLED                   TRUE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   FALSE
+#define STM32_ADC_CLOCK_ENABLED             TRUE
+#define STM32_USB_CLOCK_ENABLED             TRUE
+#define STM32_MSIRANGE                      STM32_MSIRANGE_2M
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_HSI
+#define STM32_PLLMUL_VALUE                  6
+#define STM32_PLLDIV_VALUE                  3
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV1
+#define STM32_PPRE2                         STM32_PPRE2_DIV1
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE                        STM32_MCOPRE_DIV1
+#define STM32_RTCSEL                        STM32_RTCSEL_NOCLOCK
+#define STM32_RTCPRE                        STM32_RTCPRE_DIV2
+#define STM32_VOS                           STM32_VOS_1P8
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_IRQ_PRIORITY              6
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     6
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              FALSE
+#define STM32_DAC_USE_DAC1_CH2              FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI16_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI17_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI21_22_IRQ_PRIORITY    6
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM9                  FALSE
+#define STM32_GPT_USE_TIM11                 FALSE
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM9_IRQ_PRIORITY         7
+#define STM32_GPT_TIM11_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM9                  FALSE
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM9_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM9                  FALSE
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM9_IRQ_PRIORITY         7
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  5
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_USB1                  FALSE
+#define STM32_USB_LOW_POWER_ON_SUSPEND      FALSE
+#define STM32_USB_USB1_HP_IRQ_PRIORITY      13
+#define STM32_USB_USB1_LP_IRQ_PRIORITY      14
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/readme.txt
new file mode 100644
index 0000000..9e3b3b2
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L152RE-NUCLEO/readme.txt
@@ -0,0 +1,28 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M3 STM32L152.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST_NUCLEO_L152RE board.
+
+** The Demo **
+
+The demo flashes the board LED using a thread, by pressing the button located
+on the board the test procedure is activated with output on the serial port
+SD2 (USART2, mapped on USB virtual COM port).
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/.cproject
new file mode 100644
index 0000000..4d86467
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/.cproject
@@ -0,0 +1,54 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.603687198">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.603687198" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.603687198" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.603687198." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963.1446538340" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1490952991" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1134067298" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1927705259" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1013764026" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1367371861" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1824820452" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1584496456" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1781547795" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32L476RG-NUCLEO.null.1004513353" name="RT-STM32L476RG-NUCLEO"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.603687198">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32L476RG-NUCLEO"/>
+		</configuration>
+	</storageModule>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/.project
new file mode 100644
index 0000000..58f3bc5
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32L476-DISCOVERY</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32L476_DISCOVERY</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/Makefile
new file mode 100644
index 0000000..a016e81
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32l4xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32L4xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_STM32L476_DISCOVERY/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32L476xG.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/chconf.h
new file mode 100644
index 0000000..7d99062
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/debug/RT-STM32L476-DISCOVERY (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/debug/RT-STM32L476-DISCOVERY (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..ee922c4
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/debug/RT-STM32L476-DISCOVERY (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32L476-DISCOVERY\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32L476-DISCOVERY"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.603687198"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32L476-DISCOVERY"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/main.c
new file mode 100644
index 0000000..acb9a88
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/main.c
@@ -0,0 +1,75 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * Red LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palClearLine(LINE_LED_GREEN);
+    chThdSleepMilliseconds(50);
+    palClearLine(LINE_LED_RED);
+    chThdSleepMilliseconds(200);
+    palSetLine(LINE_LED_GREEN);
+    chThdSleepMilliseconds(50);
+    palSetLine(LINE_LED_RED);
+    chThdSleepMilliseconds(200);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 2 using the driver default configuration.
+   */
+  sdStart(&SD2, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (palReadLine(LINE_JOY_CENTER))
+      TestThread(&SD2);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/mcuconf.h
new file mode 100644
index 0000000..c57fdfc
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/mcuconf.h
@@ -0,0 +1,330 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32L1xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32L4xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_VOS                           STM32_VOS_RANGE1
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI16_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   TRUE
+#define STM32_MSIPLL_ENABLED                TRUE
+#define STM32_ADC_CLOCK_ENABLED             TRUE
+#define STM32_USB_CLOCK_ENABLED             TRUE
+#define STM32_SAI1_CLOCK_ENABLED            TRUE
+#define STM32_SAI2_CLOCK_ENABLED            TRUE
+#define STM32_MSIRANGE                      STM32_MSIRANGE_4M
+#define STM32_MSISRANGE                     STM32_MSISRANGE_4M
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_MSI
+#define STM32_PLLM_VALUE                    1
+#define STM32_PLLN_VALUE                    80
+#define STM32_PLLP_VALUE                    7
+#define STM32_PLLQ_VALUE                    6
+#define STM32_PLLR_VALUE                    4
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV1
+#define STM32_PPRE2                         STM32_PPRE2_DIV1
+#define STM32_STOPWUCK                      STM32_STOPWUCK_MSI
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE                        STM32_MCOPRE_DIV1
+#define STM32_LSCOSEL                       STM32_LSCOSEL_NOCLOCK
+#define STM32_PLLSAI1N_VALUE                72
+#define STM32_PLLSAI1P_VALUE                7
+#define STM32_PLLSAI1Q_VALUE                6
+#define STM32_PLLSAI1R_VALUE                6
+#define STM32_PLLSAI2N_VALUE                72
+#define STM32_PLLSAI2P_VALUE                7
+#define STM32_PLLSAI2R_VALUE                6
+#define STM32_USART1SEL                     STM32_USART1SEL_SYSCLK
+#define STM32_USART2SEL                     STM32_USART2SEL_SYSCLK
+#define STM32_USART3SEL                     STM32_USART3SEL_SYSCLK
+#define STM32_UART4SEL                      STM32_UART4SEL_SYSCLK
+#define STM32_UART5SEL                      STM32_UART5SEL_SYSCLK
+#define STM32_LPUART1SEL                    STM32_LPUART1SEL_SYSCLK
+#define STM32_I2C1SEL                       STM32_I2C1SEL_SYSCLK
+#define STM32_I2C2SEL                       STM32_I2C2SEL_SYSCLK
+#define STM32_I2C3SEL                       STM32_I2C3SEL_SYSCLK
+#define STM32_LPTIM1SEL                     STM32_LPTIM1SEL_PCLK1
+#define STM32_LPTIM2SEL                     STM32_LPTIM2SEL_PCLK1
+#define STM32_SAI1SEL                       STM32_SAI1SEL_OFF
+#define STM32_SAI2SEL                       STM32_SAI2SEL_OFF
+#define STM32_CLK48SEL                      STM32_CLK48SEL_PLLSAI1
+#define STM32_ADCSEL                        STM32_ADCSEL_SYSCLK
+#define STM32_SWPMI1SEL                     STM32_SWPMI1SEL_PCLK1
+#define STM32_DFSDMSEL                      STM32_DFSDMSEL_PCLK1
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE                 FALSE
+#define STM32_ADC_COMPACT_SAMPLES           FALSE
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(1, 2)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(1, 3)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_ADC12_IRQ_PRIORITY        5
+#define STM32_ADC_ADC3_IRQ_PRIORITY         5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC123_CLOCK_MODE         ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              FALSE
+#define STM32_DAC_USE_DAC1_CH2              FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH1_DMA_STREAM       STM32_DMA_STREAM_ID(2, 4)
+#define STM32_DAC_DAC1_CH2_DMA_STREAM       STM32_DMA_STREAM_ID(1, 4)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI1635_38_IRQ_PRIORITY  6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI2122_IRQ_PRIORITY     15
+
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_USE_TIM15                 FALSE
+#define STM32_GPT_USE_TIM16                 FALSE
+#define STM32_GPT_USE_TIM17                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+#define STM32_GPT_TIM15_IRQ_PRIORITY        7
+#define STM32_GPT_TIM16_IRQ_PRIORITY        7
+#define STM32_GPT_TIM17_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_USE_I2C3                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C3_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_I2C3_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * SDC driver system settings.
+ */
+#define STM32_SDC_USE_SDMMC1                FALSE
+#define STM32_SDC_SDMMC_UNALIGNED_SUPPORT   TRUE
+#define STM32_SDC_SDMMC_WRITE_TIMEOUT       250
+#define STM32_SDC_SDMMC_READ_TIMEOUT        25
+#define STM32_SDC_SDMMC_CLOCK_DELAY         10
+#define STM32_SDC_SDMMC1_DMA_PRIORITY       3
+#define STM32_SDC_SDMMC1_IRQ_PRIORITY       9
+#define STM32_SDC_SDMMC1_DMA_STREAM         STM32_DMA_STREAM_ID(2, 4)
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_LPUART1            FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_LPUART1_PRIORITY       12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 4)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 1)
+#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 2)
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.+++
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               FALSE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USE_UART4                FALSE
+#define STM32_UART_USE_UART5                FALSE
+#define STM32_UART_USE_LPUART1              FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 6)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_USART3_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART3_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_RX_DMA_STREAM      STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_UART4_TX_DMA_STREAM      STM32_DMA_STREAM_ID(2, 3)
+#define STM32_UART_UART5_RX_DMA_STREAM      STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_UART5_TX_DMA_STREAM      STM32_DMA_STREAM_ID(2, 1)
+#define STM32_UART_LPUART1_RX_DMA_STREAM    STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_LPUART1_TX_DMA_STREAM    STM32_DMA_STREAM_ID(2, 6)
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_UART4_IRQ_PRIORITY       12
+#define STM32_UART_UART5_IRQ_PRIORITY       12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_UART4_DMA_PRIORITY       0
+#define STM32_UART_UART5_DMA_PRIORITY       0
+#define STM32_UART_LPUART1_DMA_PRIORITY     0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1                  FALSE
+#define STM32_USB_OTG1_IRQ_PRIORITY         14
+#define STM32_USB_OTG1_RX_FIFO_SIZE         512
+#define STM32_USB_OTG_THREAD_PRIO           LOWPRIO
+#define STM32_USB_OTG_THREAD_STACK_SIZE     128
+#define STM32_USB_OTGFIFO_FILL_BASEPRI      0
+
+/*
+ * WDG driver system settings.+++
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/readme.txt
new file mode 100644
index 0000000..33cc92c
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476-DISCOVERY/readme.txt
@@ -0,0 +1,28 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 STM32L476.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST_NUCLEO_L476RG board.
+
+** The Demo **
+
+The demo flashes the board LED using a thread, by pressing the button located
+on the board the test procedure is activated with output on the serial port
+SD2 (USART2, mapped on USB virtual COM port).
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/.cproject b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/.cproject
new file mode 100644
index 0000000..4d86467
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/.cproject
@@ -0,0 +1,54 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.603687198">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.603687198" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.603687198" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.603687198." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.586709963.1446538340" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.1490952991" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1134067298" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1927705259" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1013764026" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1367371861" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1824820452" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1584496456" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1781547795" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-STM32L476RG-NUCLEO.null.1004513353" name="RT-STM32L476RG-NUCLEO"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.603687198">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/RT-STM32L476RG-NUCLEO"/>
+		</configuration>
+	</storageModule>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/.project b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/.project
new file mode 100644
index 0000000..6d555e2
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-STM32L476RG-NUCLEO</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_NUCLEO_L476RG</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/Makefile b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/Makefile
new file mode 100644
index 0000000..19208c8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/Makefile
@@ -0,0 +1,216 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32l4xx.mk
+# HAL-OSAL files (optional).
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/STM32/STM32L4xx/platform.mk
+include $(CHIBIOS)/os/hal/boards/ST_NUCLEO_L476RG/board.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32L476xG.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/chconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/chconf.h
new file mode 100644
index 0000000..7d99062
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 10000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/debug/RT-STM32L476RG-NUCLEO (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/debug/RT-STM32L476RG-NUCLEO (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..21e8359
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/debug/RT-STM32L476RG-NUCLEO (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-STM32L476RG-NUCLEO\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-STM32L476RG-NUCLEO"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-STM32L476RG-NUCLEO"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/halconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/halconf.h
new file mode 100644
index 0000000..dddc44d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/halconf.h
@@ -0,0 +1,381 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+#include "mcuconf.h"
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         16
+#endif
+
+/*===========================================================================*/
+/* SERIAL_USB driver related setting.                                        */
+/*===========================================================================*/
+
+/**
+ * @brief   Serial over USB buffers size.
+ * @details Configuration parameter, the buffer size must be a multiple of
+ *          the USB data endpoint maximum packet size.
+ * @note    The default is 256 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_SIZE     256
+#endif
+
+/**
+ * @brief   Serial over USB number of buffers.
+ * @note    The default is 2 buffers.
+ */
+#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
+#define SERIAL_USB_BUFFERS_NUMBER   2
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/main.c b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/main.c
new file mode 100644
index 0000000..1f0f6c8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/main.c
@@ -0,0 +1,71 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+
+/*
+ * Red LED blinker thread, times are in milliseconds.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+  chRegSetThreadName("blinker");
+  while (true) {
+    palClearLine(LINE_LED_GREEN);
+    chThdSleepMilliseconds(500);
+    palSetLine(LINE_LED_GREEN);
+    chThdSleepMilliseconds(500);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates the serial driver 2 using the driver default configuration.
+   */
+  sdStart(&SD2, NULL);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * sleeping in a loop and check the button state.
+   */
+  while (true) {
+    if (!palReadLine(LINE_BUTTON))
+      TestThread(&SD2);
+    chThdSleepMilliseconds(500);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/mcuconf.h b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/mcuconf.h
new file mode 100644
index 0000000..e3bb26b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/mcuconf.h
@@ -0,0 +1,330 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#ifndef _MCUCONF_H_
+#define _MCUCONF_H_
+
+/*
+ * STM32L1xx drivers configuration.
+ * The following settings override the default settings present in
+ * the various device driver implementation headers.
+ * Note that the settings for each driver only have effect if the whole
+ * driver is enabled in halconf.h.
+ *
+ * IRQ priorities:
+ * 15...0       Lowest...Highest.
+ *
+ * DMA priorities:
+ * 0...3        Lowest...Highest.
+ */
+
+#define STM32L4xx_MCUCONF
+
+/*
+ * HAL driver system settings.
+ */
+#define STM32_NO_INIT                       FALSE
+#define STM32_VOS                           STM32_VOS_RANGE1
+#define STM32_PVD_ENABLE                    FALSE
+#define STM32_PLS                           STM32_PLS_LEV0
+#define STM32_HSI16_ENABLED                 FALSE
+#define STM32_LSI_ENABLED                   TRUE
+#define STM32_HSE_ENABLED                   FALSE
+#define STM32_LSE_ENABLED                   TRUE
+#define STM32_MSIPLL_ENABLED                TRUE
+#define STM32_ADC_CLOCK_ENABLED             TRUE
+#define STM32_USB_CLOCK_ENABLED             TRUE
+#define STM32_SAI1_CLOCK_ENABLED            TRUE
+#define STM32_SAI2_CLOCK_ENABLED            TRUE
+#define STM32_MSIRANGE                      STM32_MSIRANGE_4M
+#define STM32_MSISRANGE                     STM32_MSISRANGE_4M
+#define STM32_SW                            STM32_SW_PLL
+#define STM32_PLLSRC                        STM32_PLLSRC_MSI
+#define STM32_PLLM_VALUE                    1
+#define STM32_PLLN_VALUE                    80
+#define STM32_PLLP_VALUE                    7
+#define STM32_PLLQ_VALUE                    6
+#define STM32_PLLR_VALUE                    4
+#define STM32_HPRE                          STM32_HPRE_DIV1
+#define STM32_PPRE1                         STM32_PPRE1_DIV1
+#define STM32_PPRE2                         STM32_PPRE2_DIV1
+#define STM32_STOPWUCK                      STM32_STOPWUCK_MSI
+#define STM32_MCOSEL                        STM32_MCOSEL_NOCLOCK
+#define STM32_MCOPRE                        STM32_MCOPRE_DIV1
+#define STM32_LSCOSEL                       STM32_LSCOSEL_NOCLOCK
+#define STM32_PLLSAI1N_VALUE                72
+#define STM32_PLLSAI1P_VALUE                7
+#define STM32_PLLSAI1Q_VALUE                6
+#define STM32_PLLSAI1R_VALUE                6
+#define STM32_PLLSAI2N_VALUE                72
+#define STM32_PLLSAI2P_VALUE                7
+#define STM32_PLLSAI2R_VALUE                6
+#define STM32_USART1SEL                     STM32_USART1SEL_SYSCLK
+#define STM32_USART2SEL                     STM32_USART2SEL_SYSCLK
+#define STM32_USART3SEL                     STM32_USART3SEL_SYSCLK
+#define STM32_UART4SEL                      STM32_UART4SEL_SYSCLK
+#define STM32_UART5SEL                      STM32_UART5SEL_SYSCLK
+#define STM32_LPUART1SEL                    STM32_LPUART1SEL_SYSCLK
+#define STM32_I2C1SEL                       STM32_I2C1SEL_SYSCLK
+#define STM32_I2C2SEL                       STM32_I2C2SEL_SYSCLK
+#define STM32_I2C3SEL                       STM32_I2C3SEL_SYSCLK
+#define STM32_LPTIM1SEL                     STM32_LPTIM1SEL_PCLK1
+#define STM32_LPTIM2SEL                     STM32_LPTIM2SEL_PCLK1
+#define STM32_SAI1SEL                       STM32_SAI1SEL_OFF
+#define STM32_SAI2SEL                       STM32_SAI2SEL_OFF
+#define STM32_CLK48SEL                      STM32_CLK48SEL_PLLSAI1
+#define STM32_ADCSEL                        STM32_ADCSEL_SYSCLK
+#define STM32_SWPMI1SEL                     STM32_SWPMI1SEL_PCLK1
+#define STM32_DFSDMSEL                      STM32_DFSDMSEL_PCLK1
+#define STM32_RTCSEL                        STM32_RTCSEL_LSI
+
+/*
+ * ADC driver system settings.
+ */
+#define STM32_ADC_DUAL_MODE                 FALSE
+#define STM32_ADC_COMPACT_SAMPLES           FALSE
+#define STM32_ADC_USE_ADC1                  FALSE
+#define STM32_ADC_USE_ADC2                  FALSE
+#define STM32_ADC_USE_ADC3                  FALSE
+#define STM32_ADC_ADC1_DMA_STREAM           STM32_DMA_STREAM_ID(1, 1)
+#define STM32_ADC_ADC2_DMA_STREAM           STM32_DMA_STREAM_ID(1, 2)
+#define STM32_ADC_ADC3_DMA_STREAM           STM32_DMA_STREAM_ID(1, 3)
+#define STM32_ADC_ADC1_DMA_PRIORITY         2
+#define STM32_ADC_ADC2_DMA_PRIORITY         2
+#define STM32_ADC_ADC3_DMA_PRIORITY         2
+#define STM32_ADC_ADC12_IRQ_PRIORITY        5
+#define STM32_ADC_ADC3_IRQ_PRIORITY         5
+#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY     5
+#define STM32_ADC_ADC123_CLOCK_MODE         ADC_CCR_CKMODE_AHB_DIV1
+
+/*
+ * CAN driver system settings.
+ */
+#define STM32_CAN_USE_CAN1                  FALSE
+#define STM32_CAN_CAN1_IRQ_PRIORITY         11
+
+/*
+ * DAC driver system settings.
+ */
+#define STM32_DAC_DUAL_MODE                 FALSE
+#define STM32_DAC_USE_DAC1_CH1              FALSE
+#define STM32_DAC_USE_DAC1_CH2              FALSE
+#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY     10
+#define STM32_DAC_DAC1_CH1_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH2_DMA_PRIORITY     2
+#define STM32_DAC_DAC1_CH1_DMA_STREAM       STM32_DMA_STREAM_ID(2, 4)
+#define STM32_DAC_DAC1_CH2_DMA_STREAM       STM32_DMA_STREAM_ID(1, 4)
+
+/*
+ * EXT driver system settings.
+ */
+#define STM32_EXT_EXTI0_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI1_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI2_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI3_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI4_IRQ_PRIORITY        6
+#define STM32_EXT_EXTI5_9_IRQ_PRIORITY      6
+#define STM32_EXT_EXTI10_15_IRQ_PRIORITY    6
+#define STM32_EXT_EXTI1635_38_IRQ_PRIORITY  6
+#define STM32_EXT_EXTI18_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI19_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI20_IRQ_PRIORITY       6
+#define STM32_EXT_EXTI2122_IRQ_PRIORITY     15
+
+
+/*
+ * GPT driver system settings.
+ */
+#define STM32_GPT_USE_TIM1                  FALSE
+#define STM32_GPT_USE_TIM2                  FALSE
+#define STM32_GPT_USE_TIM3                  FALSE
+#define STM32_GPT_USE_TIM4                  FALSE
+#define STM32_GPT_USE_TIM5                  FALSE
+#define STM32_GPT_USE_TIM6                  FALSE
+#define STM32_GPT_USE_TIM7                  FALSE
+#define STM32_GPT_USE_TIM8                  FALSE
+#define STM32_GPT_USE_TIM15                 FALSE
+#define STM32_GPT_USE_TIM16                 FALSE
+#define STM32_GPT_USE_TIM17                 FALSE
+#define STM32_GPT_TIM1_IRQ_PRIORITY         7
+#define STM32_GPT_TIM2_IRQ_PRIORITY         7
+#define STM32_GPT_TIM3_IRQ_PRIORITY         7
+#define STM32_GPT_TIM4_IRQ_PRIORITY         7
+#define STM32_GPT_TIM5_IRQ_PRIORITY         7
+#define STM32_GPT_TIM6_IRQ_PRIORITY         7
+#define STM32_GPT_TIM7_IRQ_PRIORITY         7
+#define STM32_GPT_TIM8_IRQ_PRIORITY         7
+#define STM32_GPT_TIM15_IRQ_PRIORITY        7
+#define STM32_GPT_TIM16_IRQ_PRIORITY        7
+#define STM32_GPT_TIM17_IRQ_PRIORITY        7
+
+/*
+ * I2C driver system settings.
+ */
+#define STM32_I2C_USE_I2C1                  FALSE
+#define STM32_I2C_USE_I2C2                  FALSE
+#define STM32_I2C_USE_I2C3                  FALSE
+#define STM32_I2C_BUSY_TIMEOUT              50
+#define STM32_I2C_I2C1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 7)
+#define STM32_I2C_I2C1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 6)
+#define STM32_I2C_I2C2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_I2C_I2C2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_I2C_I2C3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 3)
+#define STM32_I2C_I2C3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 2)
+#define STM32_I2C_I2C1_IRQ_PRIORITY         5
+#define STM32_I2C_I2C2_IRQ_PRIORITY         5
+#define STM32_I2C_I2C3_IRQ_PRIORITY         5
+#define STM32_I2C_I2C1_DMA_PRIORITY         3
+#define STM32_I2C_I2C2_DMA_PRIORITY         3
+#define STM32_I2C_I2C3_DMA_PRIORITY         3
+#define STM32_I2C_DMA_ERROR_HOOK(i2cp)      osalSysHalt("DMA failure")
+
+/*
+ * ICU driver system settings.
+ */
+#define STM32_ICU_USE_TIM1                  FALSE
+#define STM32_ICU_USE_TIM2                  FALSE
+#define STM32_ICU_USE_TIM3                  FALSE
+#define STM32_ICU_USE_TIM4                  FALSE
+#define STM32_ICU_USE_TIM5                  FALSE
+#define STM32_ICU_USE_TIM8                  FALSE
+#define STM32_ICU_TIM1_IRQ_PRIORITY         7
+#define STM32_ICU_TIM2_IRQ_PRIORITY         7
+#define STM32_ICU_TIM3_IRQ_PRIORITY         7
+#define STM32_ICU_TIM4_IRQ_PRIORITY         7
+#define STM32_ICU_TIM5_IRQ_PRIORITY         7
+#define STM32_ICU_TIM8_IRQ_PRIORITY         7
+
+/*
+ * PWM driver system settings.
+ */
+#define STM32_PWM_USE_ADVANCED              FALSE
+#define STM32_PWM_USE_TIM1                  FALSE
+#define STM32_PWM_USE_TIM2                  FALSE
+#define STM32_PWM_USE_TIM3                  FALSE
+#define STM32_PWM_USE_TIM4                  FALSE
+#define STM32_PWM_USE_TIM5                  FALSE
+#define STM32_PWM_USE_TIM8                  FALSE
+#define STM32_PWM_TIM1_IRQ_PRIORITY         7
+#define STM32_PWM_TIM2_IRQ_PRIORITY         7
+#define STM32_PWM_TIM3_IRQ_PRIORITY         7
+#define STM32_PWM_TIM4_IRQ_PRIORITY         7
+#define STM32_PWM_TIM5_IRQ_PRIORITY         7
+#define STM32_PWM_TIM8_IRQ_PRIORITY         7
+
+/*
+ * SDC driver system settings.
+ */
+#define STM32_SDC_USE_SDMMC1                FALSE
+#define STM32_SDC_SDMMC_UNALIGNED_SUPPORT   TRUE
+#define STM32_SDC_SDMMC_WRITE_TIMEOUT       250
+#define STM32_SDC_SDMMC_READ_TIMEOUT        25
+#define STM32_SDC_SDMMC_CLOCK_DELAY         10
+#define STM32_SDC_SDMMC1_DMA_PRIORITY       3
+#define STM32_SDC_SDMMC1_IRQ_PRIORITY       9
+#define STM32_SDC_SDMMC1_DMA_STREAM         STM32_DMA_STREAM_ID(2, 4)
+
+/*
+ * SERIAL driver system settings.
+ */
+#define STM32_SERIAL_USE_USART1             FALSE
+#define STM32_SERIAL_USE_USART2             TRUE
+#define STM32_SERIAL_USE_USART3             FALSE
+#define STM32_SERIAL_USE_LPUART1            FALSE
+#define STM32_SERIAL_USART1_PRIORITY        12
+#define STM32_SERIAL_USART2_PRIORITY        12
+#define STM32_SERIAL_USART3_PRIORITY        12
+#define STM32_SERIAL_LPUART1_PRIORITY       12
+
+/*
+ * SPI driver system settings.
+ */
+#define STM32_SPI_USE_SPI1                  FALSE
+#define STM32_SPI_USE_SPI2                  FALSE
+#define STM32_SPI_USE_SPI3                  FALSE
+#define STM32_SPI_SPI1_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 3)
+#define STM32_SPI_SPI1_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 4)
+#define STM32_SPI_SPI2_RX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 4)
+#define STM32_SPI_SPI2_TX_DMA_STREAM        STM32_DMA_STREAM_ID(1, 5)
+#define STM32_SPI_SPI3_RX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 1)
+#define STM32_SPI_SPI3_TX_DMA_STREAM        STM32_DMA_STREAM_ID(2, 2)
+#define STM32_SPI_SPI1_DMA_PRIORITY         1
+#define STM32_SPI_SPI2_DMA_PRIORITY         1
+#define STM32_SPI_SPI3_DMA_PRIORITY         1
+#define STM32_SPI_SPI1_IRQ_PRIORITY         10
+#define STM32_SPI_SPI2_IRQ_PRIORITY         10
+#define STM32_SPI_SPI3_IRQ_PRIORITY         10
+#define STM32_SPI_DMA_ERROR_HOOK(spip)      osalSysHalt("DMA failure")
+
+/*
+ * ST driver system settings.
+ */
+#define STM32_ST_IRQ_PRIORITY               8
+#define STM32_ST_USE_TIMER                  2
+
+/*
+ * UART driver system settings.
+ */
+#define STM32_UART_USE_USART1               FALSE
+#define STM32_UART_USE_USART2               TRUE
+#define STM32_UART_USE_USART3               FALSE
+#define STM32_UART_USE_UART4                FALSE
+#define STM32_UART_USE_UART5                FALSE
+#define STM32_UART_USE_LPUART1              FALSE
+#define STM32_UART_USART1_RX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_USART1_TX_DMA_STREAM     STM32_DMA_STREAM_ID(2, 6)
+#define STM32_UART_USART2_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 6)
+#define STM32_UART_USART2_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 7)
+#define STM32_UART_USART3_RX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 3)
+#define STM32_UART_USART3_TX_DMA_STREAM     STM32_DMA_STREAM_ID(1, 2)
+#define STM32_UART_UART4_RX_DMA_STREAM      STM32_DMA_STREAM_ID(2, 5)
+#define STM32_UART_UART4_TX_DMA_STREAM      STM32_DMA_STREAM_ID(2, 3)
+#define STM32_UART_UART5_RX_DMA_STREAM      STM32_DMA_STREAM_ID(2, 2)
+#define STM32_UART_UART5_TX_DMA_STREAM      STM32_DMA_STREAM_ID(2, 1)
+#define STM32_UART_LPUART1_RX_DMA_STREAM    STM32_DMA_STREAM_ID(2, 7)
+#define STM32_UART_LPUART1_TX_DMA_STREAM    STM32_DMA_STREAM_ID(2, 6)
+#define STM32_UART_USART1_IRQ_PRIORITY      12
+#define STM32_UART_USART2_IRQ_PRIORITY      12
+#define STM32_UART_USART3_IRQ_PRIORITY      12
+#define STM32_UART_UART4_IRQ_PRIORITY       12
+#define STM32_UART_UART5_IRQ_PRIORITY       12
+#define STM32_UART_USART1_DMA_PRIORITY      0
+#define STM32_UART_USART2_DMA_PRIORITY      0
+#define STM32_UART_USART3_DMA_PRIORITY      0
+#define STM32_UART_UART4_DMA_PRIORITY       0
+#define STM32_UART_UART5_DMA_PRIORITY       0
+#define STM32_UART_LPUART1_DMA_PRIORITY     0
+#define STM32_UART_DMA_ERROR_HOOK(uartp)    osalSysHalt("DMA failure")
+
+/*
+ * USB driver system settings.
+ */
+#define STM32_USB_USE_OTG1                  FALSE
+#define STM32_USB_OTG1_IRQ_PRIORITY         14
+#define STM32_USB_OTG1_RX_FIFO_SIZE         512
+#define STM32_USB_OTG_THREAD_PRIO           LOWPRIO
+#define STM32_USB_OTG_THREAD_STACK_SIZE     128
+#define STM32_USB_OTGFIFO_FILL_BASEPRI      0
+
+/*
+ * WDG driver system settings.
+ */
+#define STM32_WDG_USE_IWDG                  FALSE
+
+#endif /* _MCUCONF_H_ */
diff --git a/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/readme.txt b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/readme.txt
new file mode 100644
index 0000000..33cc92c
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/STM32/RT-STM32L476RG-NUCLEO/readme.txt
@@ -0,0 +1,28 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4 STM32L476.                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs on an ST_NUCLEO_L476RG board.
+
+** The Demo **
+
+The demo flashes the board LED using a thread, by pressing the button located
+on the board the test procedure is activated with output on the serial port
+SD2 (USART2, mapped on USB virtual COM port).
+
+** Build Procedure **
+
+The demo has been tested by using the free Codesourcery GCC-based toolchain
+and YAGARTO.
+Just modify the TRGT line in the makefile in order to use different GCC ports.
+
+** Notes **
+
+Some files used by the demo are not part of ChibiOS/RT but are copyright of
+ST Microelectronics and are licensed under a different license.
+Also note that not all the files present in the ST library are distributed
+with ChibiOS/RT, you can find the whole library on the ST web site:
+
+                             http://www.st.com
diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/.cproject b/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/.cproject
new file mode 100644
index 0000000..9109f18
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/.cproject
@@ -0,0 +1,55 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.114656749">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.114656749." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="NIL-ARMCM0-GENERIC.null.1703860681" name="NIL-ARMCM0-GENERIC"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.114656749">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope" versionNumber="2">
+		<configuration configurationName="Default">
+			<resource resourceType="PROJECT" workspacePath="/NIL-ARMCM0-GENERIC"/>
+		</configuration>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/.project b/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/.project
new file mode 100644
index 0000000..8746134
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/.project
@@ -0,0 +1,95 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>NIL-ARMCM0-GENERIC</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>mingw32-make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>false</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/Makefile b/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/Makefile
new file mode 100644
index 0000000..de47bb7
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/Makefile
@@ -0,0 +1,217 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x100
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk
+# HAL-OSAL files (optional).
+#include $(CHIBIOS)/os/hal/hal.mk
+#include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk
+#include $(CHIBIOS)/os/hal/boards/ST_STM32F072B_DISCOVERY/board.mk
+#include $(CHIBIOS)/os/hal/osal/nil/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/nil/nil.mk
+include $(CHIBIOS)/os/nil/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
+# Other files (optional).
+#include $(CHIBIOS)/test/nil/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m0
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS = -DSTM32F051x8
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
+
+##############################################################################
+# MISRA check rule, requires PCLint and the setup files, not provided.
+#
+misra:
+	@lint-nt -v -w3 $(DEFS) pclint/co-gcc.lnt pclint/au-misra3.lnt pclint/waivers.lnt $(IINCDIR) $(CSRC) &> misra.txt
diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/debug/NIL-ARMC0-GENERIC (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/debug/NIL-ARMC0-GENERIC (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..4ca089d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/debug/NIL-ARMC0-GENERIC (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\NIL-ARMCM0-GENERIC\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="NIL-ARMCM0-GENERIC"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/NIL-ARMCM0-GENERIC"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/main.c b/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/main.c
new file mode 100644
index 0000000..a233632
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/main.c
@@ -0,0 +1,104 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "nil.h"
+
+#if !defined(SYSTEM_CLOCK)
+#define SYSTEM_CLOCK 8000000U
+#endif
+
+/*
+ * @brief   System Timer handler.
+ */
+CH_IRQ_HANDLER(SysTick_Handler) {
+
+  CH_IRQ_PROLOGUE();
+
+  chSysLockFromISR();
+  chSysTimerHandlerI();
+  chSysUnlockFromISR();
+
+  CH_IRQ_EPILOGUE();
+}
+
+static uint32_t seconds_counter;
+static uint32_t minutes_counter;
+
+/*
+ * Seconds counter thread.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+
+  while (true) {
+    chThdSleepMilliseconds(1000);
+    seconds_counter++;
+  }
+}
+
+/*
+ * Minutes counter thread.
+ */
+static THD_WORKING_AREA(waThread2, 128);
+static THD_FUNCTION(Thread2, arg) {
+
+  (void)arg;
+
+  while (true) {
+    chThdSleepSeconds(60);
+    minutes_counter++;
+  }
+}
+
+/*
+ * Threads static table, one entry per thread. The number of entries must
+ * match NIL_CFG_NUM_THREADS.
+ */
+THD_TABLE_BEGIN
+THD_TABLE_ENTRY(waThread1, "counter1", Thread1, NULL)
+THD_TABLE_ENTRY(waThread2, "counter2", Thread2, NULL)
+THD_TABLE_END
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * Hardware initialization, in this simple demo just the systick timer is
+   * initialized.
+   */
+  SysTick->LOAD = SYSTEM_CLOCK / NIL_CFG_ST_FREQUENCY - (systime_t)1;
+  SysTick->VAL = (uint32_t)0;
+  SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_ENABLE_Msk |
+                  SysTick_CTRL_TICKINT_Msk;
+
+  /*
+   * System initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  chSysInit();
+
+  /* This is now the idle thread loop, you may perform here a low priority
+     task but you must never try to sleep or wait in this loop. Note that
+     this tasks runs at the lowest priority level so any instruction added
+     here will be executed after all other tasks have been started.*/
+  while (true) {
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/nilconf.h b/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/nilconf.h
new file mode 100644
index 0000000..27b6bac
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/NIL-ARMCM0-GENERIC/nilconf.h
@@ -0,0 +1,179 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    nilconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _NILCONF_H_
+#define _NILCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of user threads in the application.
+ * @note    This number is not inclusive of the idle thread which is
+ *          Implicitly handled.
+ */
+#define NIL_CFG_NUM_THREADS                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name System timer settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define NIL_CFG_ST_RESOLUTION               32
+
+/**
+ * @brief   System tick frequency.
+ * @note    This value together with the @p NIL_CFG_ST_RESOLUTION
+ *          option defines the maximum amount of time allowed for
+ *          timeouts.
+ */
+#define NIL_CFG_ST_FREQUENCY                1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define NIL_CFG_ST_TIMEDELTA                0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define NIL_CFG_USE_EVENTS                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System assertions.
+ */
+#define NIL_CFG_ENABLE_ASSERTS              FALSE
+
+/**
+ * @brief   Stack check.
+ */
+#define NIL_CFG_ENABLE_STACK_CHECK          FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System initialization hook.
+ */
+#if !defined(NIL_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__)
+#define NIL_CFG_SYSTEM_INIT_HOOK() {                                        \
+}
+#endif
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define NIL_CFG_THREAD_EXT_FIELDS                                           \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ */
+#define NIL_CFG_THREAD_EXT_INIT_HOOK(tr) {                                  \
+  /* Add custom threads initialization code here.*/                         \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define NIL_CFG_IDLE_ENTER_HOOK() {                                         \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define NIL_CFG_IDLE_LEAVE_HOOK() {                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ */
+#if !defined(NIL_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
+#define NIL_CFG_SYSTEM_HALT_HOOK(reason) {                                  \
+}
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in nilcore.h).   */
+/*===========================================================================*/
+
+#endif  /* _NILCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/.cproject b/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/.cproject
new file mode 100644
index 0000000..d9e1ee7
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/.cproject
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.114656749">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.114656749." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="NIL-ARMCM4-GENERIC.null.1703860681" name="NIL-ARMCM4-GENERIC"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.114656749">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/.project b/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/.project
new file mode 100644
index 0000000..d0b5986
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/.project
@@ -0,0 +1,95 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>NIL-ARMCM4-GENERIC</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>mingw32-make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>false</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/ST_STM32F3_DISCOVERY</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/Makefile b/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/Makefile
new file mode 100644
index 0000000..1b4ebb8
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/Makefile
@@ -0,0 +1,222 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x100
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk
+# HAL-OSAL files (optional).
+#include $(CHIBIOS)/os/hal/hal.mk
+#include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk
+#include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk
+#include $(CHIBIOS)/os/hal/osal/nil/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/nil/nil.mk
+include $(CHIBIOS)/os/nil/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+#include $(CHIBIOS)/test/nil/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS = -DSTM32F407xx
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
+
+##############################################################################
+# MISRA check rule, requires PCLint and the setup files, not provided.
+#
+misra:
+	@lint-nt -v -w3 $(DEFS) pclint/co-gcc.lnt pclint/au-misra3.lnt pclint/waivers.lnt $(IINCDIR) $(CSRC) &> misra.txt
diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/debug/NIL-ARMC4-GENERIC (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/debug/NIL-ARMC4-GENERIC (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..9241157
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/debug/NIL-ARMC4-GENERIC (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\NIL-ARMCM4-GENERIC\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="NIL-ARMCM4-GENERIC"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.1984968159"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/NIL-ARMCM4-GENERIC"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/main.c b/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/main.c
new file mode 100644
index 0000000..a233632
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/main.c
@@ -0,0 +1,104 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "nil.h"
+
+#if !defined(SYSTEM_CLOCK)
+#define SYSTEM_CLOCK 8000000U
+#endif
+
+/*
+ * @brief   System Timer handler.
+ */
+CH_IRQ_HANDLER(SysTick_Handler) {
+
+  CH_IRQ_PROLOGUE();
+
+  chSysLockFromISR();
+  chSysTimerHandlerI();
+  chSysUnlockFromISR();
+
+  CH_IRQ_EPILOGUE();
+}
+
+static uint32_t seconds_counter;
+static uint32_t minutes_counter;
+
+/*
+ * Seconds counter thread.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+
+  while (true) {
+    chThdSleepMilliseconds(1000);
+    seconds_counter++;
+  }
+}
+
+/*
+ * Minutes counter thread.
+ */
+static THD_WORKING_AREA(waThread2, 128);
+static THD_FUNCTION(Thread2, arg) {
+
+  (void)arg;
+
+  while (true) {
+    chThdSleepSeconds(60);
+    minutes_counter++;
+  }
+}
+
+/*
+ * Threads static table, one entry per thread. The number of entries must
+ * match NIL_CFG_NUM_THREADS.
+ */
+THD_TABLE_BEGIN
+THD_TABLE_ENTRY(waThread1, "counter1", Thread1, NULL)
+THD_TABLE_ENTRY(waThread2, "counter2", Thread2, NULL)
+THD_TABLE_END
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * Hardware initialization, in this simple demo just the systick timer is
+   * initialized.
+   */
+  SysTick->LOAD = SYSTEM_CLOCK / NIL_CFG_ST_FREQUENCY - (systime_t)1;
+  SysTick->VAL = (uint32_t)0;
+  SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_ENABLE_Msk |
+                  SysTick_CTRL_TICKINT_Msk;
+
+  /*
+   * System initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  chSysInit();
+
+  /* This is now the idle thread loop, you may perform here a low priority
+     task but you must never try to sleep or wait in this loop. Note that
+     this tasks runs at the lowest priority level so any instruction added
+     here will be executed after all other tasks have been started.*/
+  while (true) {
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/nilconf.h b/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/nilconf.h
new file mode 100644
index 0000000..27b6bac
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/NIL-ARMCM4-GENERIC/nilconf.h
@@ -0,0 +1,179 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    nilconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _NILCONF_H_
+#define _NILCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of user threads in the application.
+ * @note    This number is not inclusive of the idle thread which is
+ *          Implicitly handled.
+ */
+#define NIL_CFG_NUM_THREADS                 2
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name System timer settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define NIL_CFG_ST_RESOLUTION               32
+
+/**
+ * @brief   System tick frequency.
+ * @note    This value together with the @p NIL_CFG_ST_RESOLUTION
+ *          option defines the maximum amount of time allowed for
+ *          timeouts.
+ */
+#define NIL_CFG_ST_FREQUENCY                1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define NIL_CFG_ST_TIMEDELTA                0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define NIL_CFG_USE_EVENTS                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System assertions.
+ */
+#define NIL_CFG_ENABLE_ASSERTS              FALSE
+
+/**
+ * @brief   Stack check.
+ */
+#define NIL_CFG_ENABLE_STACK_CHECK          FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System initialization hook.
+ */
+#if !defined(NIL_CFG_SYSTEM_INIT_HOOK) || defined(__DOXYGEN__)
+#define NIL_CFG_SYSTEM_INIT_HOOK() {                                        \
+}
+#endif
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define NIL_CFG_THREAD_EXT_FIELDS                                           \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ */
+#define NIL_CFG_THREAD_EXT_INIT_HOOK(tr) {                                  \
+  /* Add custom threads initialization code here.*/                         \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define NIL_CFG_IDLE_ENTER_HOOK() {                                         \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define NIL_CFG_IDLE_LEAVE_HOOK() {                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ */
+#if !defined(NIL_CFG_SYSTEM_HALT_HOOK) || defined(__DOXYGEN__)
+#define NIL_CFG_SYSTEM_HALT_HOOK(reason) {                                  \
+}
+#endif
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in nilcore.h).   */
+/*===========================================================================*/
+
+#endif  /* _NILCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/.cproject b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/.cproject
new file mode 100644
index 0000000..9b46e0d
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/.cproject
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.114656749">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.114656749." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-ARM7-GENERIC.null.1703860681" name="RT-ARM7-GENERIC"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.114656749">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/.project b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/.project
new file mode 100644
index 0000000..8fab5aa
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/.project
@@ -0,0 +1,90 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-ARM7-GENERIC</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value>-j1</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>true</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/Makefile b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/Makefile
new file mode 100644
index 0000000..bd26b72
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/Makefile
@@ -0,0 +1,246 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = no
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the ARM System/User stack. This
+# stack is the stack used by the main() thread.
+ifeq ($(USE_SYSTEM_STACKSIZE),)
+  USE_SYSTEM_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the ARM IRQ stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_IRQ_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the ARM FIQ stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_FIQ_STACKSIZE),)
+  USE_FIQ_STACKSIZE = 64
+endif
+
+# Stack size to the allocated to the ARM Supervisor stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_SUPERVISOR_STACKSIZE),)
+  USE_SUPERVISOR_STACKSIZE = 8
+endif
+
+# Stack size to the allocated to the ARM Undefined stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_UND_STACKSIZE),)
+  USE_UND_STACKSIZE = 8
+endif
+
+# Stack size to the allocated to the ARM Abort stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_ABT_STACKSIZE),)
+  USE_ABT_STACKSIZE = 8
+endif
+
+# Enables the use of FPU.
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARM/compilers/GCC/mk/startup_lpc214x.mk
+# HAL-OSAL files (optional).
+#include $(CHIBIOS)/os/hal/hal.mk
+#include $(CHIBIOS)/os/hal/ports/LPC/LPC214x/platform.mk
+#include $(CHIBIOS)/os/hal/boards/OLIMEX_LPC_P2148/board.mk
+#include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARM/compilers/GCC/mk/port_generic.mk
+# Other files (optional).
+#include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/LPC2148.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = arm7tdmi
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARM/compilers/GCC
+include $(RULESPATH)/rules.mk
+
+##############################################################################
+# MISRA check rule, requires PCLint and the setup files, not provided.
+#
+misra:
+	@lint-nt -v -w3 $(DEFS) pclint/co-gcc.lnt pclint/au-misra3.lnt pclint/waivers.lnt $(IINCDIR) $(CSRC) &> misra.txt
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/chconf.h b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/chconf.h
new file mode 100644
index 0000000..f6244ad
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/debug/RT-ARMCM0-GENERIC (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/debug/RT-ARMCM0-GENERIC (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..e136b6b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/debug/RT-ARMCM0-GENERIC (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-ARM7-GENERIC\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-ARM7-GENERIC"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-ARM7-GENERIC"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/main.c b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/main.c
new file mode 100644
index 0000000..fd6b655
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/main.c
@@ -0,0 +1,57 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+
+/*
+ * This is a periodic thread that does absolutely nothing except sleeping.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+
+  chRegSetThreadName("sleeper");
+
+  while (true) {
+    chThdSleepMilliseconds(1000);
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * System initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  chSysInit();
+
+  /*
+   * Creates the example thread.
+   */
+  (void) chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it just sleeps.
+   */
+  while (true) {
+    chThdSleepMilliseconds(1000);
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/readme.txt b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/readme.txt
new file mode 100644
index 0000000..b3feb75
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARM7-GENERIC/readme.txt
@@ -0,0 +1,17 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M0.                                      **
+*****************************************************************************
+
+** TARGET **
+
+The demo targets a generic ARM Cortex-M4 device without HAL support.
+
+** The Demo **
+
+** Build Procedure **
+
+** Notes **
+
+The files ch.ld and cmparams.h must be customized for your device. You also
+need to provide the CMSIS compliant device header from your vendor, it this
+demo an ST header is used.
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/.cproject b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/.cproject
new file mode 100644
index 0000000..0300ed2
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/.cproject
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.114656749">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.114656749." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-ARMCM0-GENERIC.null.1703860681" name="RT-ARMCM0-GENERIC"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.114656749">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/.project b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/.project
new file mode 100644
index 0000000..1e37dfe
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/.project
@@ -0,0 +1,90 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-ARMCM0-GENERIC</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value>-j1</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>true</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/Makefile b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/Makefile
new file mode 100644
index 0000000..a495b31
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/Makefile
@@ -0,0 +1,217 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x200
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f0xx.mk
+# HAL-OSAL files (optional).
+#include $(CHIBIOS)/os/hal/hal.mk
+#include $(CHIBIOS)/os/hal/ports/STM32/STM32F0xx/platform.mk
+#include $(CHIBIOS)/os/hal/boards/ST_STM32F072B_DISCOVERY/board.mk
+#include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
+# Other files (optional).
+#include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F051x8.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m0
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS = -DSTM32F051x8
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
+
+##############################################################################
+# MISRA check rule, requires PCLint and the setup files, not provided.
+#
+misra:
+	@lint-nt -v -w3 $(DEFS) pclint/co-gcc.lnt pclint/au-misra3.lnt pclint/waivers.lnt $(IINCDIR) $(CSRC) &> misra.txt
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/chconf.h b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/chconf.h
new file mode 100644
index 0000000..f6244ad
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/debug/RT-ARMCM0-GENERIC (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/debug/RT-ARMCM0-GENERIC (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..73713c9
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/debug/RT-ARMCM0-GENERIC (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-ARMCM0-GENERIC\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-ARMCM0-GENERIC"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-ARMCM0-GENERIC"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/main.c b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/main.c
new file mode 100644
index 0000000..8bd7eee
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/main.c
@@ -0,0 +1,90 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+
+#if !defined(SYSTEM_CLOCK)
+#define SYSTEM_CLOCK 8000000U
+#endif
+
+/*
+ * @brief   System Timer handler.
+ */
+CH_IRQ_HANDLER(SysTick_Handler) {
+
+  CH_IRQ_PROLOGUE();
+
+  chSysLockFromISR();
+  chSysTimerHandlerI();
+  chSysUnlockFromISR();
+
+  CH_IRQ_EPILOGUE();
+}
+
+static uint32_t seconds_counter;
+static uint32_t minutes_counter;
+
+/*
+ * Seconds counter thread.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+
+  chRegSetThreadName("counter");
+
+  while (true) {
+    chThdSleepMilliseconds(1000);
+    seconds_counter++;
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * Hardware initialization, in this simple demo just the systick timer is
+   * initialized.
+   */
+  SysTick->LOAD = SYSTEM_CLOCK / CH_CFG_ST_FREQUENCY - (systime_t)1;
+  SysTick->VAL = (uint32_t)0;
+  SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_ENABLE_Msk |
+                  SysTick_CTRL_TICKINT_Msk;
+
+  /*
+   * System initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  chSysInit();
+
+  /*
+   * Creates the example thread.
+   */
+  (void) chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * increasing the minutes counter.
+   */
+  while (true) {
+    chThdSleepSeconds(60);
+    minutes_counter++;
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/readme.txt b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/readme.txt
new file mode 100644
index 0000000..b3feb75
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARMCM0-GENERIC/readme.txt
@@ -0,0 +1,17 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M0.                                      **
+*****************************************************************************
+
+** TARGET **
+
+The demo targets a generic ARM Cortex-M4 device without HAL support.
+
+** The Demo **
+
+** Build Procedure **
+
+** Notes **
+
+The files ch.ld and cmparams.h must be customized for your device. You also
+need to provide the CMSIS compliant device header from your vendor, it this
+demo an ST header is used.
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/.cproject b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/.cproject
new file mode 100644
index 0000000..0f2085e
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/.cproject
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?>
+
+<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.114656749">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.114656749" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.114656749" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.114656749." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.1182750861.169007201" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.579570726" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.2143276802" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1873650595" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1337802279" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1707090075" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.338985256" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1165165914" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.714476670" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-ARMCM4-GENERIC.null.1703860681" name="RT-ARMCM4-GENERIC"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.114656749">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/.project b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/.project
new file mode 100644
index 0000000..46e96a0
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/.project
@@ -0,0 +1,90 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-ARMCM4-GENERIC</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+				<dictionary>
+					<key>?name?</key>
+					<value></value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.append_environment</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.autoBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildArguments</key>
+					<value>-j1</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.buildCommand</key>
+					<value>make</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.cleanBuildTarget</key>
+					<value>clean</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.contents</key>
+					<value>org.eclipse.cdt.make.core.activeConfigSettings</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableAutoBuild</key>
+					<value>false</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableCleanBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.enableFullBuild</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.fullBuildTarget</key>
+					<value>all</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.stopOnError</key>
+					<value>true</value>
+				</dictionary>
+				<dictionary>
+					<key>org.eclipse.cdt.make.core.useDefaultBuildCmd</key>
+					<value>true</value>
+				</dictionary>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/Makefile b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/Makefile
new file mode 100644
index 0000000..f9dc658
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/Makefile
@@ -0,0 +1,222 @@
+##############################################################################
+# Build global options
+# NOTE: Can be overridden externally.
+#
+
+# Compiler options here.
+ifeq ($(USE_OPT),)
+  USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16
+endif
+
+# C specific options here (added to USE_OPT).
+ifeq ($(USE_COPT),)
+  USE_COPT = 
+endif
+
+# C++ specific options here (added to USE_OPT).
+ifeq ($(USE_CPPOPT),)
+  USE_CPPOPT = -fno-rtti
+endif
+
+# Enable this if you want the linker to remove unused code and data
+ifeq ($(USE_LINK_GC),)
+  USE_LINK_GC = yes
+endif
+
+# Linker extra options here.
+ifeq ($(USE_LDOPT),)
+  USE_LDOPT = 
+endif
+
+# Enable this if you want link time optimizations (LTO)
+ifeq ($(USE_LTO),)
+  USE_LTO = yes
+endif
+
+# If enabled, this option allows to compile the application in THUMB mode.
+ifeq ($(USE_THUMB),)
+  USE_THUMB = yes
+endif
+
+# Enable this if you want to see the full log while compiling.
+ifeq ($(USE_VERBOSE_COMPILE),)
+  USE_VERBOSE_COMPILE = no
+endif
+
+# If enabled, this option makes the build process faster by not compiling
+# modules not used in the current configuration.
+ifeq ($(USE_SMART_BUILD),)
+  USE_SMART_BUILD = yes
+endif
+
+#
+# Build global options
+##############################################################################
+
+##############################################################################
+# Architecture or project specific options
+#
+
+# Stack size to be allocated to the Cortex-M process stack. This stack is
+# the stack used by the main() thread.
+ifeq ($(USE_PROCESS_STACKSIZE),)
+  USE_PROCESS_STACKSIZE = 0x400
+endif
+
+# Stack size to the allocated to the Cortex-M main/exceptions stack. This
+# stack is used for processing interrupts and exceptions.
+ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
+  USE_EXCEPTIONS_STACKSIZE = 0x400
+endif
+
+# Enables the use of FPU on Cortex-M4 (no, softfp, hard).
+ifeq ($(USE_FPU),)
+  USE_FPU = no
+endif
+
+#
+# Architecture or project specific options
+##############################################################################
+
+##############################################################################
+# Project, sources and paths
+#
+
+# Define project name here
+PROJECT = ch
+
+# Imported source files and paths
+CHIBIOS = ../../..
+# Startup files.
+include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk
+# HAL-OSAL files (optional).
+#include $(CHIBIOS)/os/hal/hal.mk
+#include $(CHIBIOS)/os/hal/ports/STM32/STM32F4xx/platform.mk
+#include $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.mk
+#include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+# RTOS files (optional).
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk
+# Other files (optional).
+#include $(CHIBIOS)/test/rt/test.mk
+
+# Define linker script file here
+LDSCRIPT= $(STARTUPLD)/STM32F407xG.ld
+
+# C sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CSRC = $(STARTUPSRC) \
+       $(KERNSRC) \
+       $(PORTSRC) \
+       $(OSALSRC) \
+       $(HALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(TESTSRC) \
+       main.c
+
+# C++ sources that can be compiled in ARM or THUMB mode depending on the global
+# setting.
+CPPSRC =
+
+# C sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACSRC =
+
+# C++ sources to be compiled in ARM mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+ACPPSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCSRC =
+
+# C sources to be compiled in THUMB mode regardless of the global setting.
+# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
+#       option that results in lower performance and larger code size.
+TCPPSRC =
+
+# List ASM source files here
+ASMSRC = $(STARTUPASM) $(PORTASM) $(OSALASM)
+
+INCDIR = $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \
+         $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \
+         $(CHIBIOS)/os/various
+
+#
+# Project, sources and paths
+##############################################################################
+
+##############################################################################
+# Compiler settings
+#
+
+MCU  = cortex-m4
+
+#TRGT = arm-elf-
+TRGT = arm-none-eabi-
+CC   = $(TRGT)gcc
+CPPC = $(TRGT)g++
+# Enable loading with g++ only if you need C++ runtime support.
+# NOTE: You can use C++ even without C++ support if you are careful. C++
+#       runtime support makes code size explode.
+LD   = $(TRGT)gcc
+#LD   = $(TRGT)g++
+CP   = $(TRGT)objcopy
+AS   = $(TRGT)gcc -x assembler-with-cpp
+AR   = $(TRGT)ar
+OD   = $(TRGT)objdump
+SZ   = $(TRGT)size
+HEX  = $(CP) -O ihex
+BIN  = $(CP) -O binary
+
+# ARM-specific options here
+AOPT =
+
+# THUMB-specific options here
+TOPT = -mthumb -DTHUMB
+
+# Define C warning options here
+CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
+
+# Define C++ warning options here
+CPPWARN = -Wall -Wextra -Wundef
+
+#
+# Compiler settings
+##############################################################################
+
+##############################################################################
+# Start of user section
+#
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS = -DSTM32F407xx
+
+# Define ASM defines here
+UADEFS =
+
+# List all user directories here
+UINCDIR =
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+#
+# End of user defines
+##############################################################################
+
+RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC
+include $(RULESPATH)/rules.mk
+
+##############################################################################
+# MISRA check rule, requires PCLint and the setup files, not provided.
+#
+misra:
+	@lint-nt -v -w3 $(DEFS) pclint/co-gcc.lnt pclint/au-misra3.lnt pclint/waivers.lnt $(IINCDIR) $(CSRC) &> misra.txt
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/chconf.h b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/chconf.h
new file mode 100644
index 0000000..f2f2859
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 0
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       TRUE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/debug/RT-ARMCM4-GENERIC (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/debug/RT-ARMCM4-GENERIC (OpenOCD, Flash and Run).launch
new file mode 100644
index 0000000..60b3b6b
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/debug/RT-ARMCM4-GENERIC (OpenOCD, Flash and Run).launch
@@ -0,0 +1,52 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<launchConfiguration type="org.eclipse.cdt.debug.gdbjtag.launchConfigurationType">
+<stringAttribute key="bad_container_name" value="\RT-ARMCM4-GENERIC\debug"/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.delay" value="1"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doHalt" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.doReset" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.imageOffset" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.initCommands" value="set remotetimeout 20&#13;&#10;monitor reset init&#13;&#10;monitor sleep 50&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.ipAddress" value="localhost"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.jtagDevice" value="Generic TCP/IP"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.loadSymbols" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.pcRegister" value=""/>
+<intAttribute key="org.eclipse.cdt.debug.gdbjtag.core.portNumber" value="3333"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.runCommands" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setPcRegister" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setResume" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.setStopAt" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.stopAt" value="main"/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsFileName" value=""/>
+<stringAttribute key="org.eclipse.cdt.debug.gdbjtag.core.symbolsOffset" value=""/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForImage" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useFileForSymbols" value="false"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForImage" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useProjBinaryForSymbols" value="true"/>
+<booleanAttribute key="org.eclipse.cdt.debug.gdbjtag.core.useRemoteTarget" value="true"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.commandFactory" value="Standard"/>
+<stringAttribute key="org.eclipse.cdt.debug.mi.core.protocol" value="mi"/>
+<booleanAttribute key="org.eclipse.cdt.debug.mi.core.verboseMode" value="false"/>
+<stringAttribute key="org.eclipse.cdt.dsf.gdb.DEBUG_NAME" value="arm-none-eabi-gdb"/>
+<intAttribute key="org.eclipse.cdt.launch.ATTR_BUILD_BEFORE_LAUNCH_ATTR" value="2"/>
+<stringAttribute key="org.eclipse.cdt.launch.COREFILE_PATH" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.DEBUGGER_REGISTER_GROUPS" value=""/>
+<stringAttribute key="org.eclipse.cdt.launch.FORMAT" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&lt;contentList/&gt;"/>
+<stringAttribute key="org.eclipse.cdt.launch.GLOBAL_VARIABLES" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;globalVariableList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.MEMORY_BLOCKS" value="&lt;?xml version=&quot;1.0&quot; encoding=&quot;UTF-8&quot; standalone=&quot;no&quot;?&gt;&#13;&#10;&lt;memoryBlockExpressionList/&gt;&#13;&#10;"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROGRAM_NAME" value="./build/ch.elf"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_ATTR" value="RT-ARMCM4-GENERIC"/>
+<booleanAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_AUTO_ATTR" value="true"/>
+<stringAttribute key="org.eclipse.cdt.launch.PROJECT_BUILD_CONFIG_ID_ATTR" value="0.114656749"/>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_PATHS">
+<listEntry value="/RT-ARMCM4-GENERIC"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.core.MAPPED_RESOURCE_TYPES">
+<listEntry value="4"/>
+</listAttribute>
+<listAttribute key="org.eclipse.debug.ui.favoriteGroups">
+<listEntry value="org.eclipse.debug.ui.launchGroup.debug"/>
+</listAttribute>
+</launchConfiguration>
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/main.c b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/main.c
new file mode 100644
index 0000000..8bd7eee
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/main.c
@@ -0,0 +1,90 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+
+#if !defined(SYSTEM_CLOCK)
+#define SYSTEM_CLOCK 8000000U
+#endif
+
+/*
+ * @brief   System Timer handler.
+ */
+CH_IRQ_HANDLER(SysTick_Handler) {
+
+  CH_IRQ_PROLOGUE();
+
+  chSysLockFromISR();
+  chSysTimerHandlerI();
+  chSysUnlockFromISR();
+
+  CH_IRQ_EPILOGUE();
+}
+
+static uint32_t seconds_counter;
+static uint32_t minutes_counter;
+
+/*
+ * Seconds counter thread.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+  (void)arg;
+
+  chRegSetThreadName("counter");
+
+  while (true) {
+    chThdSleepMilliseconds(1000);
+    seconds_counter++;
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  /*
+   * Hardware initialization, in this simple demo just the systick timer is
+   * initialized.
+   */
+  SysTick->LOAD = SYSTEM_CLOCK / CH_CFG_ST_FREQUENCY - (systime_t)1;
+  SysTick->VAL = (uint32_t)0;
+  SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_ENABLE_Msk |
+                  SysTick_CTRL_TICKINT_Msk;
+
+  /*
+   * System initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  chSysInit();
+
+  /*
+   * Creates the example thread.
+   */
+  (void) chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  /*
+   * Normal main() thread activity, in this demo it does nothing except
+   * increasing the minutes counter.
+   */
+  while (true) {
+    chThdSleepSeconds(60);
+    minutes_counter++;
+  }
+}
diff --git a/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/readme.txt b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/readme.txt
new file mode 100644
index 0000000..da9c630
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-ARMCM4-GENERIC/readme.txt
@@ -0,0 +1,17 @@
+*****************************************************************************
+** ChibiOS/RT port for ARM-Cortex-M4.                                      **
+*****************************************************************************
+
+** TARGET **
+
+The demo targets a generic ARM Cortex-M4 device without HAL support.
+
+** The Demo **
+
+** Build Procedure **
+
+** Notes **
+
+The files ch.ld and cmparams.h must be customized for your device. You also
+need to provide the CMSIS compliant device header from your vendor, it this
+demo an ST header is used.
diff --git a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/.cproject b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/.cproject
new file mode 100644
index 0000000..39a4a35
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/.cproject
@@ -0,0 +1,50 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
+	<storageModule moduleId="org.eclipse.cdt.core.settings">
+		<cconfiguration id="0.759990224">
+			<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="0.759990224" moduleId="org.eclipse.cdt.core.settings" name="Default">
+				<externalSettings/>
+				<extensions>
+					<extension id="org.eclipse.cdt.core.VCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+					<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
+				</extensions>
+			</storageModule>
+			<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+				<configuration artifactName="${ProjName}" buildProperties="" description="" id="0.759990224" name="Default" parent="org.eclipse.cdt.build.core.prefbase.cfg">
+					<folderInfo id="0.759990224." name="/" resourcePath="">
+						<toolChain id="org.eclipse.cdt.build.core.prefbase.toolchain.221916885" name="No ToolChain" resourceTypeBasedDiscovery="false" superClass="org.eclipse.cdt.build.core.prefbase.toolchain">
+							<targetPlatform id="org.eclipse.cdt.build.core.prefbase.toolchain.221916885.1754418474" name=""/>
+							<builder autoBuildTarget="all" cleanBuildTarget="clean" enableAutoBuild="false" enableCleanBuild="true" enabledIncrementalBuild="true" id="org.eclipse.cdt.build.core.settings.default.builder.978207162" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="false" name="Gnu Make Builder" parallelBuildOn="true" parallelizationNumber="optimal" superClass="org.eclipse.cdt.build.core.settings.default.builder"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.libs.1955256520" name="holder for library settings" superClass="org.eclipse.cdt.build.core.settings.holder.libs"/>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.681446675" name="Assembly" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.2122537408" languageId="org.eclipse.cdt.core.assembly" languageName="Assembly" sourceContentType="org.eclipse.cdt.core.asmSource" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.2123891590" name="GNU C++" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.977304391" languageId="org.eclipse.cdt.core.g++" languageName="GNU C++" sourceContentType="org.eclipse.cdt.core.cxxSource,org.eclipse.cdt.core.cxxHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+							<tool id="org.eclipse.cdt.build.core.settings.holder.1641835309" name="GNU C" superClass="org.eclipse.cdt.build.core.settings.holder">
+								<inputType id="org.eclipse.cdt.build.core.settings.holder.inType.1340673795" languageId="org.eclipse.cdt.core.gcc" languageName="GNU C" sourceContentType="org.eclipse.cdt.core.cSource,org.eclipse.cdt.core.cHeader" superClass="org.eclipse.cdt.build.core.settings.holder.inType"/>
+							</tool>
+						</toolChain>
+					</folderInfo>
+				</configuration>
+			</storageModule>
+			<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
+		</cconfiguration>
+	</storageModule>
+	<storageModule moduleId="cdtBuildSystem" version="4.0.0">
+		<project id="RT-Win32-Simulator.null.623541221" name="RT-Win32-Simulator"/>
+	</storageModule>
+	<storageModule moduleId="scannerConfiguration">
+		<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId=""/>
+		<scannerConfigBuildInfo instanceId="0.759990224">
+			<autodiscovery enabled="true" problemReportingEnabled="true" selectedProfileId="org.eclipse.cdt.make.core.GCCStandardMakePerProjectProfile"/>
+		</scannerConfigBuildInfo>
+	</storageModule>
+	<storageModule moduleId="org.eclipse.cdt.core.LanguageSettingsProviders"/>
+	<storageModule moduleId="refreshScope"/>
+</cproject>
diff --git a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/.project b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/.project
new file mode 100644
index 0000000..817c72f
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/.project
@@ -0,0 +1,43 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<projectDescription>
+	<name>RT-Win32-Simulator</name>
+	<comment></comment>
+	<projects>
+	</projects>
+	<buildSpec>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.genmakebuilder</name>
+			<triggers>clean,full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+		<buildCommand>
+			<name>org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder</name>
+			<triggers>full,incremental,</triggers>
+			<arguments>
+			</arguments>
+		</buildCommand>
+	</buildSpec>
+	<natures>
+		<nature>org.eclipse.cdt.core.cnature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.managedBuildNature</nature>
+		<nature>org.eclipse.cdt.managedbuilder.core.ScannerConfigNature</nature>
+	</natures>
+	<linkedResources>
+		<link>
+			<name>board</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os/hal/boards/simulator</locationURI>
+		</link>
+		<link>
+			<name>os</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/os</locationURI>
+		</link>
+		<link>
+			<name>test</name>
+			<type>2</type>
+			<locationURI>CHIBIOS/test</locationURI>
+		</link>
+	</linkedResources>
+</projectDescription>
diff --git a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/Makefile b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/Makefile
new file mode 100644
index 0000000..0164f13
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/Makefile
@@ -0,0 +1,151 @@
+#
+#       !!!! Do NOT edit this makefile with an editor which replace tabs by spaces !!!!
+#
+##############################################################################################
+#
+# On command line:
+#
+# make all = Create project
+#
+# make clean = Clean project files.
+#
+# To rebuild project do "make clean" and "make all".
+#
+
+##############################################################################################
+# Start of default section
+#
+
+TRGT = mingw32-
+CC   = $(TRGT)gcc
+AS   = $(TRGT)gcc -x assembler-with-cpp
+
+# List all default C defines here, like -D_DEBUG=1
+DDEFS = -DSIMULATOR
+
+# List all default ASM defines here, like -D_DEBUG=1
+DADEFS =
+
+# List all default directories to look for include files here
+DINCDIR =
+
+# List the default directory to look for the libraries here
+DLIBDIR =
+
+# List all default libraries here
+DLIBS = -lws2_32
+
+#
+# End of default section
+##############################################################################################
+
+##############################################################################################
+# Start of user section
+#
+
+# Define project name here
+PROJECT = ch
+
+# Define linker script file here
+LDSCRIPT =
+
+# List all user C define here, like -D_DEBUG=1
+UDEFS =
+
+# Define ASM defines here
+UADEFS =
+
+# Imported source files
+CHIBIOS = ../../..
+include $(CHIBIOS)/os/hal/boards/simulator/board.mk
+include $(CHIBIOS)/os/hal/hal.mk
+include $(CHIBIOS)/os/hal/ports/simulator/win32/platform.mk
+include $(CHIBIOS)/os/hal/osal/rt/osal.mk
+include $(CHIBIOS)/os/rt/ports/SIMIA32/compilers/GCC/port.mk
+include $(CHIBIOS)/os/rt/rt.mk
+include $(CHIBIOS)/test/rt/test.mk
+
+# List C source files here
+SRC =  $(PORTSRC) \
+       $(KERNSRC) \
+       $(TESTSRC) \
+       $(HALSRC) \
+       $(OSALSRC) \
+       $(PLATFORMSRC) \
+       $(BOARDSRC) \
+       $(CHIBIOS)/os/various/shell.c \
+       $(CHIBIOS)/os/hal/lib/streams/memstreams.c \
+       $(CHIBIOS)/os/hal/lib/streams/chprintf.c \
+       main.c
+
+# List ASM source files here
+ASRC =
+
+# List all user directories here
+UINCDIR = $(PORTINC) $(KERNINC) $(TESTINC) \
+          $(HALINC) $(OSALINC) $(PLATFORMINC) $(BOARDINC) \
+          $(CHIBIOS)/os/hal/lib/streams $(CHIBIOS)/os/various
+
+# List the user directory to look for the libraries here
+ULIBDIR =
+
+# List all user libraries here
+ULIBS =
+
+# Define optimisation level here
+OPT = -ggdb -O2
+
+#
+# End of user defines
+##############################################################################################
+
+INCDIR  = $(patsubst %,-I%,$(DINCDIR) $(UINCDIR))
+LIBDIR  = $(patsubst %,-L%,$(DLIBDIR) $(ULIBDIR))
+DEFS    = $(DDEFS) $(UDEFS)
+ADEFS   = $(DADEFS) $(UADEFS)
+OBJS    = $(ASRC:.s=.o) $(SRC:.c=.o)
+LIBS    = $(DLIBS) $(ULIBS)
+
+LDFLAGS = -Wl,-Map=$(PROJECT).map,--cref,--no-warn-mismatch $(LIBDIR)
+ASFLAGS = -Wa,-amhls=$(<:.s=.lst) $(ADEFS)
+CPFLAGS = -Wall -Wextra -Wundef -Wstrict-prototypes -fverbose-asm -Wa,-alms=$(<:.c=.lst) $(DEFS)
+
+# Generate dependency information
+CPFLAGS += -MD -MP -MF .dep/$(@F).d
+
+#
+# makefile rules
+#
+
+all: $(OBJS) $(PROJECT).exe
+
+%.o : %.c
+	$(CC) -c $(OPT) $(CPFLAGS) -I . $(INCDIR) $< -o $@
+
+%.o : %.s
+	$(AS) -c $(OPT) $(ASFLAGS) $< -o $@
+
+%exe: $(OBJS)
+	$(CC) $(OPT) $(OBJS) $(LDFLAGS) $(LIBS) -o $@
+
+gcov:
+	-mkdir gcov
+	$(COV) -u $(subst /,\,$(SRC))
+	-mv *.gcov ./gcov
+
+clean:
+	-rm -f $(OBJS)
+	-rm -f $(PROJECT).exe
+	-rm -f $(PROJECT).map
+	-rm -f $(SRC:.c=.c.bak)
+	-rm -f $(SRC:.c=.lst)
+	-rm -f $(ASRC:.s=.s.bak)
+	-rm -f $(ASRC:.s=.lst)
+	-rm -fR .dep
+
+#
+# Include the dependency files, should be the last of the makefile
+#
+-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*)
+
+# *** EOF ***
diff --git a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/chconf.h b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/chconf.h
new file mode 100644
index 0000000..aa9154f
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/chconf.h
@@ -0,0 +1,499 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/chconf.h
+ * @brief   Configuration file template.
+ * @details A copy of this file must be placed in each project directory, it
+ *          contains the application specific kernel settings.
+ *
+ * @addtogroup config
+ * @details Kernel related settings and hooks.
+ * @{
+ */
+
+#ifndef _CHCONF_H_
+#define _CHCONF_H_
+
+/*===========================================================================*/
+/**
+ * @name System timers settings
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   System time counter resolution.
+ * @note    Allowed values are 16 or 32 bits.
+ */
+#define CH_CFG_ST_RESOLUTION                32
+
+/**
+ * @brief   System tick frequency.
+ * @details Frequency of the system timer that drives the system ticks. This
+ *          setting also defines the system tick time unit.
+ */
+#define CH_CFG_ST_FREQUENCY                 1000
+
+/**
+ * @brief   Time delta constant for the tick-less mode.
+ * @note    If this value is zero then the system uses the classic
+ *          periodic tick. This value represents the minimum number
+ *          of ticks that is safe to specify in a timeout directive.
+ *          The value one is not valid, timeouts are rounded up to
+ *          this value.
+ */
+#define CH_CFG_ST_TIMEDELTA                 0
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel parameters and options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Round robin interval.
+ * @details This constant is the number of system ticks allowed for the
+ *          threads before preemption occurs. Setting this value to zero
+ *          disables the preemption for threads with equal priority and the
+ *          round robin becomes cooperative. Note that higher priority
+ *          threads can still preempt, the kernel is always preemptive.
+ * @note    Disabling the round robin preemption makes the kernel more compact
+ *          and generally faster.
+ * @note    The round robin preemption is not supported in tickless mode and
+ *          must be set to zero in that case.
+ */
+#define CH_CFG_TIME_QUANTUM                 20
+
+/**
+ * @brief   Managed RAM size.
+ * @details Size of the RAM area to be managed by the OS. If set to zero
+ *          then the whole available RAM is used. The core memory is made
+ *          available to the heap allocator and/or can be used directly through
+ *          the simplified core memory allocator.
+ *
+ * @note    In order to let the OS manage the whole RAM the linker script must
+ *          provide the @p __heap_base__ and @p __heap_end__ symbols.
+ * @note    Requires @p CH_CFG_USE_MEMCORE.
+ */
+#define CH_CFG_MEMCORE_SIZE                 0x20000
+
+/**
+ * @brief   Idle thread automatic spawn suppression.
+ * @details When this option is activated the function @p chSysInit()
+ *          does not spawn the idle thread. The application @p main()
+ *          function becomes the idle thread and must implement an
+ *          infinite loop.
+ */
+#define CH_CFG_NO_IDLE_THREAD               FALSE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Performance options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   OS optimization.
+ * @details If enabled then time efficient rather than space efficient code
+ *          is used when two possible implementations exist.
+ *
+ * @note    This is not related to the compiler optimization options.
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_OPTIMIZE_SPEED               TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Subsystem options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Time Measurement APIs.
+ * @details If enabled then the time measurement APIs are included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_TM                       FALSE
+
+/**
+ * @brief   Threads registry APIs.
+ * @details If enabled then the registry APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_REGISTRY                 TRUE
+
+/**
+ * @brief   Threads synchronization APIs.
+ * @details If enabled then the @p chThdWait() function is included in
+ *          the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_WAITEXIT                 TRUE
+
+/**
+ * @brief   Semaphores APIs.
+ * @details If enabled then the Semaphores APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_SEMAPHORES               TRUE
+
+/**
+ * @brief   Semaphores queuing mode.
+ * @details If enabled then the threads are enqueued on semaphores by
+ *          priority rather than in FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_SEMAPHORES_PRIORITY      FALSE
+
+/**
+ * @brief   Mutexes APIs.
+ * @details If enabled then the mutexes APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MUTEXES                  TRUE
+
+/**
+ * @brief   Enables recursive behavior on mutexes.
+ * @note    Recursive mutexes are heavier and have an increased
+ *          memory footprint.
+ *
+ * @note    The default is @p FALSE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_MUTEXES_RECURSIVE        FALSE
+
+/**
+ * @brief   Conditional Variables APIs.
+ * @details If enabled then the conditional variables APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MUTEXES.
+ */
+#define CH_CFG_USE_CONDVARS                 TRUE
+
+/**
+ * @brief   Conditional Variables APIs with timeout.
+ * @details If enabled then the conditional variables APIs with timeout
+ *          specification are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_CONDVARS.
+ */
+#define CH_CFG_USE_CONDVARS_TIMEOUT         TRUE
+
+/**
+ * @brief   Events Flags APIs.
+ * @details If enabled then the event flags APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_EVENTS                   TRUE
+
+/**
+ * @brief   Events Flags APIs with timeout.
+ * @details If enabled then the events APIs with timeout specification
+ *          are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_EVENTS.
+ */
+#define CH_CFG_USE_EVENTS_TIMEOUT           TRUE
+
+/**
+ * @brief   Synchronous Messages APIs.
+ * @details If enabled then the synchronous messages APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MESSAGES                 TRUE
+
+/**
+ * @brief   Synchronous Messages queuing mode.
+ * @details If enabled then messages are served by priority rather than in
+ *          FIFO order.
+ *
+ * @note    The default is @p FALSE. Enable this if you have special
+ *          requirements.
+ * @note    Requires @p CH_CFG_USE_MESSAGES.
+ */
+#define CH_CFG_USE_MESSAGES_PRIORITY        FALSE
+
+/**
+ * @brief   Mailboxes APIs.
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are
+ *          included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_SEMAPHORES.
+ */
+#define CH_CFG_USE_MAILBOXES                TRUE
+
+/**
+ * @brief   I/O Queues APIs.
+ * @details If enabled then the I/O queues APIs are included in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_QUEUES                   TRUE
+
+/**
+ * @brief   Core Memory Manager APIs.
+ * @details If enabled then the core memory manager APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMCORE                  TRUE
+
+/**
+ * @brief   Heap Allocator APIs.
+ * @details If enabled then the memory heap allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
+ *          @p CH_CFG_USE_SEMAPHORES.
+ * @note    Mutexes are recommended.
+ */
+#define CH_CFG_USE_HEAP                     TRUE
+
+/**
+ * @brief   Memory Pools Allocator APIs.
+ * @details If enabled then the memory pools allocator APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ */
+#define CH_CFG_USE_MEMPOOLS                 TRUE
+
+/**
+ * @brief   Dynamic Threads APIs.
+ * @details If enabled then the dynamic threads creation APIs are included
+ *          in the kernel.
+ *
+ * @note    The default is @p TRUE.
+ * @note    Requires @p CH_CFG_USE_WAITEXIT.
+ * @note    Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
+ */
+#define CH_CFG_USE_DYNAMIC                  TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Debug options
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Debug option, kernel statistics.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_STATISTICS                   FALSE
+
+/**
+ * @brief   Debug option, system state check.
+ * @details If enabled the correct call protocol for system APIs is checked
+ *          at runtime.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_SYSTEM_STATE_CHECK           FALSE
+
+/**
+ * @brief   Debug option, parameters checks.
+ * @details If enabled then the checks on the API functions input
+ *          parameters are activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_CHECKS                FALSE
+
+/**
+ * @brief   Debug option, consistency checks.
+ * @details If enabled then all the assertions in the kernel code are
+ *          activated. This includes consistency checks inside the kernel,
+ *          runtime anomalies and port-defined checks.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_ASSERTS               FALSE
+
+/**
+ * @brief   Debug option, trace buffer.
+ * @details If enabled then the context switch circular trace buffer is
+ *          activated.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_ENABLE_TRACE                 FALSE
+
+/**
+ * @brief   Debug option, stack checks.
+ * @details If enabled then a runtime stack check is performed.
+ *
+ * @note    The default is @p FALSE.
+ * @note    The stack check is performed in a architecture/port dependent way.
+ *          It may not be implemented or some ports.
+ * @note    The default failure mode is to halt the system with the global
+ *          @p panic_msg variable set to @p NULL.
+ */
+#define CH_DBG_ENABLE_STACK_CHECK           FALSE
+
+/**
+ * @brief   Debug option, stacks initialization.
+ * @details If enabled then the threads working area is filled with a byte
+ *          value when a thread is created. This can be useful for the
+ *          runtime measurement of the used stack.
+ *
+ * @note    The default is @p FALSE.
+ */
+#define CH_DBG_FILL_THREADS                 FALSE
+
+/**
+ * @brief   Debug option, threads profiling.
+ * @details If enabled then a field is added to the @p thread_t structure that
+ *          counts the system ticks occurred while executing the thread.
+ *
+ * @note    The default is @p FALSE.
+ * @note    This debug option is not currently compatible with the
+ *          tickless mode.
+ */
+#define CH_DBG_THREADS_PROFILING            TRUE
+
+/** @} */
+
+/*===========================================================================*/
+/**
+ * @name Kernel hooks
+ * @{
+ */
+/*===========================================================================*/
+
+/**
+ * @brief   Threads descriptor structure extension.
+ * @details User fields added to the end of the @p thread_t structure.
+ */
+#define CH_CFG_THREAD_EXTRA_FIELDS                                          \
+  /* Add threads custom fields here.*/
+
+/**
+ * @brief   Threads initialization hook.
+ * @details User initialization code added to the @p chThdInit() API.
+ *
+ * @note    It is invoked from within @p chThdInit() and implicitly from all
+ *          the threads creation APIs.
+ */
+#define CH_CFG_THREAD_INIT_HOOK(tp) {                                       \
+  /* Add threads initialization code here.*/                                \
+}
+
+/**
+ * @brief   Threads finalization hook.
+ * @details User finalization code added to the @p chThdExit() API.
+ *
+ * @note    It is inserted into lock zone.
+ * @note    It is also invoked when the threads simply return in order to
+ *          terminate.
+ */
+#define CH_CFG_THREAD_EXIT_HOOK(tp) {                                       \
+  /* Add threads finalization code here.*/                                  \
+}
+
+/**
+ * @brief   Context switch hook.
+ * @details This hook is invoked just before switching between threads.
+ */
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) {                              \
+  /* Context switch code here.*/                                            \
+}
+
+/**
+ * @brief   Idle thread enter hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to activate a power saving mode.
+ */
+#define CH_CFG_IDLE_ENTER_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle thread leave hook.
+ * @note    This hook is invoked within a critical zone, no OS functions
+ *          should be invoked from here.
+ * @note    This macro can be used to deactivate a power saving mode.
+ */
+#define CH_CFG_IDLE_LEAVE_HOOK() {                                          \
+}
+
+/**
+ * @brief   Idle Loop hook.
+ * @details This hook is continuously invoked by the idle thread loop.
+ */
+#define CH_CFG_IDLE_LOOP_HOOK() {                                           \
+  /* Idle loop code here.*/                                                 \
+}
+
+/**
+ * @brief   System tick event hook.
+ * @details This hook is invoked in the system tick handler immediately
+ *          after processing the virtual timers queue.
+ */
+#define CH_CFG_SYSTEM_TICK_HOOK() {                                         \
+  /* System tick event code here.*/                                         \
+}
+
+/**
+ * @brief   System halt hook.
+ * @details This hook is invoked in case to a system halting error before
+ *          the system is halted.
+ */
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) {                                   \
+  /* System halt code here.*/                                               \
+}
+
+/** @} */
+
+/*===========================================================================*/
+/* Port-specific settings (override port settings defaulted in chcore.h).    */
+/*===========================================================================*/
+
+#endif  /* _CHCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/halconf.h b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/halconf.h
new file mode 100644
index 0000000..70ba5bf
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/halconf.h
@@ -0,0 +1,365 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+/**
+ * @file    templates/halconf.h
+ * @brief   HAL configuration header.
+ * @details HAL configuration file, this file allows to enable or disable the
+ *          various device drivers from your application. You may also use
+ *          this file in order to override the device drivers default settings.
+ *
+ * @addtogroup HAL_CONF
+ * @{
+ */
+
+#ifndef _HALCONF_H_
+#define _HALCONF_H_
+
+/*#include "mcuconf.h"*/
+
+/**
+ * @brief   Enables the TM subsystem.
+ */
+#if !defined(HAL_USE_TM) || defined(__DOXYGEN__)
+#define HAL_USE_TM                  FALSE
+#endif
+
+/**
+ * @brief   Enables the PAL subsystem.
+ */
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
+#define HAL_USE_PAL                 TRUE
+#endif
+
+/**
+ * @brief   Enables the ADC subsystem.
+ */
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
+#define HAL_USE_ADC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the CAN subsystem.
+ */
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
+#define HAL_USE_CAN                 FALSE
+#endif
+
+/**
+ * @brief   Enables the DAC subsystem.
+ */
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
+#define HAL_USE_DAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the EXT subsystem.
+ */
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
+#define HAL_USE_EXT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the GPT subsystem.
+ */
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
+#define HAL_USE_GPT                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2C subsystem.
+ */
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
+#define HAL_USE_I2C                 FALSE
+#endif
+
+/**
+ * @brief   Enables the I2S subsystem.
+ */
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
+#define HAL_USE_I2S                 FALSE
+#endif
+
+/**
+ * @brief   Enables the ICU subsystem.
+ */
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
+#define HAL_USE_ICU                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MAC subsystem.
+ */
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
+#define HAL_USE_MAC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the MMC_SPI subsystem.
+ */
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_MMC_SPI             FALSE
+#endif
+
+/**
+ * @brief   Enables the PWM subsystem.
+ */
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
+#define HAL_USE_PWM                 FALSE
+#endif
+
+/**
+ * @brief   Enables the RTC subsystem.
+ */
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
+#define HAL_USE_RTC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SDC subsystem.
+ */
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
+#define HAL_USE_SDC                 FALSE
+#endif
+
+/**
+ * @brief   Enables the SERIAL subsystem.
+ */
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL              TRUE
+#endif
+
+/**
+ * @brief   Enables the SERIAL over USB subsystem.
+ */
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
+#define HAL_USE_SERIAL_USB          FALSE
+#endif
+
+/**
+ * @brief   Enables the SPI subsystem.
+ */
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
+#define HAL_USE_SPI                 FALSE
+#endif
+
+/**
+ * @brief   Enables the UART subsystem.
+ */
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
+#define HAL_USE_UART                FALSE
+#endif
+
+/**
+ * @brief   Enables the USB subsystem.
+ */
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
+#define HAL_USE_USB                 FALSE
+#endif
+
+/**
+ * @brief   Enables the WDG subsystem.
+ */
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
+#define HAL_USE_WDG                 FALSE
+#endif
+
+/*===========================================================================*/
+/* ADC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
+#define ADC_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define ADC_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* CAN driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Sleep mode related APIs inclusion switch.
+ */
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
+#define CAN_USE_SLEEP_MODE          TRUE
+#endif
+
+/*===========================================================================*/
+/* I2C driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables the mutual exclusion APIs on the I2C bus.
+ */
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define I2C_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* MAC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
+#define MAC_USE_ZERO_COPY           FALSE
+#endif
+
+/**
+ * @brief   Enables an event sources for incoming packets.
+ */
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
+#define MAC_USE_EVENTS              TRUE
+#endif
+
+/*===========================================================================*/
+/* MMC_SPI driver related settings.                                          */
+/*===========================================================================*/
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ *          This option is recommended also if the SPI driver does not
+ *          use a DMA channel and heavily loads the CPU.
+ */
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
+#define MMC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SDC driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Number of initialization attempts before rejecting the card.
+ * @note    Attempts are performed at 10mS intervals.
+ */
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
+#define SDC_INIT_RETRY              100
+#endif
+
+/**
+ * @brief   Include support for MMC cards.
+ * @note    MMC support is not yet implemented so this option must be kept
+ *          at @p FALSE.
+ */
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
+#define SDC_MMC_SUPPORT             FALSE
+#endif
+
+/**
+ * @brief   Delays insertions.
+ * @details If enabled this options inserts delays into the MMC waiting
+ *          routines releasing some extra CPU time for the threads with
+ *          lower priority, this may slow down the driver a bit however.
+ */
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
+#define SDC_NICE_WAITING            TRUE
+#endif
+
+/*===========================================================================*/
+/* SERIAL driver related settings.                                           */
+/*===========================================================================*/
+
+/**
+ * @brief   Default bit rate.
+ * @details Configuration parameter, this is the baud rate selected for the
+ *          default configuration.
+ */
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
+#define SERIAL_DEFAULT_BITRATE      38400
+#endif
+
+/**
+ * @brief   Serial buffers size.
+ * @details Configuration parameter, you can change the depth of the queue
+ *          buffers depending on the requirements of your application.
+ * @note    The default is 16 bytes for both the transmission and receive
+ *          buffers.
+ */
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
+#define SERIAL_BUFFERS_SIZE         32
+#endif
+
+/*===========================================================================*/
+/* SPI driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
+#define SPI_USE_WAIT                TRUE
+#endif
+
+/**
+ * @brief   Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define SPI_USE_MUTUAL_EXCLUSION    TRUE
+#endif
+
+/*===========================================================================*/
+/* UART driver related settings.                                             */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
+#define UART_USE_WAIT               FALSE
+#endif
+
+/**
+ * @brief   Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
+#define UART_USE_MUTUAL_EXCLUSION   FALSE
+#endif
+
+/*===========================================================================*/
+/* USB driver related settings.                                              */
+/*===========================================================================*/
+
+/**
+ * @brief   Enables synchronous APIs.
+ * @note    Disabling this option saves both code and data space.
+ */
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
+#define USB_USE_WAIT                FALSE
+#endif
+
+#endif /* _HALCONF_H_ */
+
+/** @} */
diff --git a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/main.c b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/main.c
new file mode 100644
index 0000000..6540693
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/main.c
@@ -0,0 +1,252 @@
+/*
+    ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "test.h"
+#include "shell.h"
+#include "chprintf.h"
+
+#define SHELL_WA_SIZE       THD_WORKING_AREA_SIZE(4096)
+#define CONSOLE_WA_SIZE     THD_WORKING_AREA_SIZE(4096)
+#define TEST_WA_SIZE        THD_WORKING_AREA_SIZE(4096)
+
+#define cputs(msg) chMsgSend(cdtp, (msg_t)msg)
+
+static thread_t *cdtp;
+static thread_t *shelltp1;
+static thread_t *shelltp2;
+
+static void cmd_mem(BaseSequentialStream *chp, int argc, char *argv[]) {
+  size_t n, size;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: mem\r\n");
+    return;
+  }
+  n = chHeapStatus(NULL, &size);
+  chprintf(chp, "core free memory : %u bytes\r\n", chCoreGetStatusX());
+  chprintf(chp, "heap fragments   : %u\r\n", n);
+  chprintf(chp, "heap free total  : %u bytes\r\n", size);
+}
+
+static void cmd_threads(BaseSequentialStream *chp, int argc, char *argv[]) {
+  static const char *states[] = {CH_STATE_NAMES};
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: threads\r\n");
+    return;
+  }
+  chprintf(chp, "    addr    stack prio refs     state time\r\n");
+  tp = chRegFirstThread();
+  do {
+    chprintf(chp, "%.8lx %.8lx %4lu %4lu %9s %lu\r\n",
+            (uint32_t)tp, (uint32_t)tp->p_ctx.esp,
+            (uint32_t)tp->p_prio, (uint32_t)(tp->p_refs - 1),
+            states[tp->p_state], (uint32_t)tp->p_time);
+    tp = chRegNextThread(tp);
+  } while (tp != NULL);
+}
+
+static void cmd_test(BaseSequentialStream *chp, int argc, char *argv[]) {
+  thread_t *tp;
+
+  (void)argv;
+  if (argc > 0) {
+    chprintf(chp, "Usage: test\r\n");
+    return;
+  }
+  tp = chThdCreateFromHeap(NULL, TEST_WA_SIZE, chThdGetPriorityX(),
+                           TestThread, chp);
+  if (tp == NULL) {
+    chprintf(chp, "out of memory\r\n");
+    return;
+  }
+  chThdWait(tp);
+}
+
+static const ShellCommand commands[] = {
+  {"mem", cmd_mem},
+  {"threads", cmd_threads},
+  {"test", cmd_test},
+  {NULL, NULL}
+};
+
+static const ShellConfig shell_cfg1 = {
+  (BaseSequentialStream *)&SD1,
+  commands
+};
+
+static const ShellConfig shell_cfg2 = {
+  (BaseSequentialStream *)&SD2,
+  commands
+};
+
+/*
+ * Console print server done using synchronous messages. This makes the access
+ * to the C printf() thread safe and the print operation atomic among threads.
+ * In this example the message is the zero terminated string itself.
+ */
+static THD_FUNCTION(console_thread, arg) {
+
+  (void)arg;
+  while (!chThdShouldTerminateX()) {
+    thread_t *tp = chMsgWait();
+    puts((char *)chMsgGet(tp));
+    fflush(stdout);
+    chMsgRelease(tp, MSG_OK);
+  }
+}
+
+/**
+ * @brief Shell termination handler.
+ *
+ * @param[in] id event id.
+ */
+static void termination_handler(eventid_t id) {
+
+  (void)id;
+  if (shelltp1 && chThdTerminatedX(shelltp1)) {
+    chThdWait(shelltp1);
+    shelltp1 = NULL;
+    chThdSleepMilliseconds(10);
+    cputs("Init: shell on SD1 terminated");
+    chSysLock();
+    chOQResetI(&SD1.oqueue);
+    chSysUnlock();
+  }
+  if (shelltp2 && chThdTerminatedX(shelltp2)) {
+    chThdWait(shelltp2);
+    shelltp2 = NULL;
+    chThdSleepMilliseconds(10);
+    cputs("Init: shell on SD2 terminated");
+    chSysLock();
+    chOQResetI(&SD2.oqueue);
+    chSysUnlock();
+  }
+}
+
+static event_listener_t sd1fel, sd2fel;
+
+/**
+ * @brief SD1 status change handler.
+ *
+ * @param[in] id event id.
+ */
+static void sd1_handler(eventid_t id) {
+  eventflags_t flags;
+
+  (void)id;
+  flags = chEvtGetAndClearFlags(&sd1fel);
+  if ((flags & CHN_CONNECTED) && (shelltp1 == NULL)) {
+    cputs("Init: connection on SD1");
+    shelltp1 = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO + 1);
+  }
+  if (flags & CHN_DISCONNECTED) {
+    cputs("Init: disconnection on SD1");
+    chSysLock();
+    chIQResetI(&SD1.iqueue);
+    chSysUnlock();
+  }
+}
+
+/**
+ * @brief SD2 status change handler.
+ *
+ * @param[in] id event id.
+ */
+static void sd2_handler(eventid_t id) {
+  eventflags_t flags;
+
+  (void)id;
+  flags = chEvtGetAndClearFlags(&sd2fel);
+  if ((flags & CHN_CONNECTED) && (shelltp2 == NULL)) {
+    cputs("Init: connection on SD2");
+    shelltp2 = shellCreate(&shell_cfg2, SHELL_WA_SIZE, NORMALPRIO + 10);
+  }
+  if (flags & CHN_DISCONNECTED) {
+    cputs("Init: disconnection on SD2");
+    chSysLock();
+    chIQResetI(&SD2.iqueue);
+    chSysUnlock();
+  }
+}
+
+static evhandler_t fhandlers[] = {
+  termination_handler,
+  sd1_handler,
+  sd2_handler
+};
+
+/*------------------------------------------------------------------------*
+ * Simulator main.                                                        *
+ *------------------------------------------------------------------------*/
+int main(void) {
+  event_listener_t tel;
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Serial ports (simulated) initialization.
+   */
+  sdStart(&SD1, NULL);
+  sdStart(&SD2, NULL);
+
+  /*
+   * Shell manager initialization.
+   */
+  shellInit();
+  chEvtRegister(&shell_terminated, &tel, 0);
+
+  /*
+   * Console thread started.
+   */
+  cdtp = chThdCreateFromHeap(NULL, CONSOLE_WA_SIZE, NORMALPRIO + 1,
+                             console_thread, NULL);
+
+  /*
+   * Initializing connection/disconnection events.
+   */
+  cputs("Shell service started on SD1, SD2");
+  cputs("  - Listening for connections on SD1");
+  chEvtRegister(chnGetEventSource(&SD1), &sd1fel, 1);
+  cputs("  - Listening for connections on SD2");
+  chEvtRegister(chnGetEventSource(&SD2), &sd2fel, 2);
+
+  /*
+   * Events servicing loop.
+   */
+  while (!chThdShouldTerminateX())
+    chEvtDispatch(fhandlers, chEvtWaitOne(ALL_EVENTS));
+
+  /*
+   * Clean simulator exit.
+   */
+  chEvtUnregister(chnGetEventSource(&SD1), &sd1fel);
+  chEvtUnregister(chnGetEventSource(&SD2), &sd2fel);
+  return 0;
+}
diff --git a/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/readme.txt b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/readme.txt
new file mode 100644
index 0000000..e72e2e0
--- /dev/null
+++ b/ChibiOS_16.1.5/demos/various/RT-Win32-Simulator/readme.txt
@@ -0,0 +1,33 @@
+*****************************************************************************
+** ChibiOS/RT port for x86 into a Win32 process                            **
+*****************************************************************************
+
+** TARGET **
+
+The demo runs under any Windows version as an application program. The serial
+I/O is simulated over TCP/IP sockets.
+
+** The Demo **
+
+The demo listens on the two serial ports, when a connection is detected a
+thread is started that serves a small command shell.
+The demo shows how to create/terminate threads at runtime, how to listen to
+events, how to work with serial ports, how to use the messages.
+You can develop your ChibiOS/RT application using this demo as a simulator
+then you can recompile it for a different architecture.
+See demo.c for details.
+
+** Build Procedure **
+
+The demo was built using the MinGW toolchain.
+
+** Connect to the demo **
+
+In order to connect to the demo a telnet client is required. A good choice
+is PuTTY:
+
+http://www.putty.org/
+
+Host Name: 127.0.0.1
+Port: 29001 and/or 29002
+Connection Type: Raw