diff options
Diffstat (limited to 'ChibiOS_16.1.5/testhal/STM32/STM32L4xx/GPT-ADC/main.c')
| -rw-r--r-- | ChibiOS_16.1.5/testhal/STM32/STM32L4xx/GPT-ADC/main.c | 166 |
1 files changed, 166 insertions, 0 deletions
diff --git a/ChibiOS_16.1.5/testhal/STM32/STM32L4xx/GPT-ADC/main.c b/ChibiOS_16.1.5/testhal/STM32/STM32L4xx/GPT-ADC/main.c new file mode 100644 index 0000000..aac72e8 --- /dev/null +++ b/ChibiOS_16.1.5/testhal/STM32/STM32L4xx/GPT-ADC/main.c @@ -0,0 +1,166 @@ +/*
+ ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
+
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+
+/*===========================================================================*/
+/* GPT driver related. */
+/*===========================================================================*/
+
+/*
+ * GPT4 configuration. This timer is used as trigger for the ADC.
+ */
+static const GPTConfig gpt4cfg1 = {
+ .frequency = 1000000U,
+ .callback = NULL,
+ .cr2 = TIM_CR2_MMS_1, /* MMS = 010 = TRGO on Update Event. */
+ .dier = 0U
+};
+
+/*===========================================================================*/
+/* ADC driver related. */
+/*===========================================================================*/
+
+#define ADC_GRP1_NUM_CHANNELS 2
+#define ADC_GRP1_BUF_DEPTH 64
+
+adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH];
+
+/*
+ * ADC streaming callback.
+ */
+size_t nx = 0, ny = 0;
+static void adccallback(ADCDriver *adcp, adcsample_t *buffer, size_t n) {
+
+ (void)adcp;
+
+ /* Updating counters.*/
+ if (samples1 == buffer) {
+ nx += n;
+ }
+ else {
+ ny += n;
+ }
+}
+
+/*
+ * ADC errors callback, should never happen.
+ */
+static void adcerrorcallback(ADCDriver *adcp, adcerror_t err) {
+
+ (void)adcp;
+ (void)err;
+}
+
+/*
+ * ADC conversion group.
+ * Mode: Continuous, 16 samples of 2 channels, HS triggered by
+ * GPT4-TRGO.
+ * Channels: VRef, PC1.
+ */
+static const ADCConversionGroup adcgrpcfg1 = {
+ true,
+ ADC_GRP1_NUM_CHANNELS,
+ adccallback,
+ adcerrorcallback,
+ ADC_CFGR_CONT | ADC_CFGR_EXTEN_RISING | ADC_CFGR_EXTSEL_SRC(12), /* CFGR */
+ ADC_TR(0, 4095), /* TR1 */
+ { /* SMPR[2]*/
+ ADC_SMPR1_SMP_AN0(ADC_SMPR_SMP_247P5),
+ ADC_SMPR1_SMP_AN2(ADC_SMPR_SMP_247P5)
+ },
+ { /* SQR[4] */
+ ADC_SQR1_SQ1_N(ADC_CHANNEL_IN0) | ADC_SQR1_SQ2_N(ADC_CHANNEL_IN2),
+ 0,
+ 0,
+ 0
+ }
+};
+
+/*===========================================================================*/
+/* Application code. */
+/*===========================================================================*/
+
+/*
+ * This is a periodic thread that does absolutely nothing except flashing
+ * a LED attached to TP1.
+ */
+static THD_WORKING_AREA(waThread1, 128);
+static THD_FUNCTION(Thread1, arg) {
+
+ (void)arg;
+ chRegSetThreadName("blinker");
+ palSetLineMode(LINE_ARD_D13, PAL_MODE_OUTPUT_PUSHPULL);
+ while (true) {
+ palSetLine(LINE_ARD_D13);
+ chThdSleepMilliseconds(500);
+ palClearLine(LINE_ARD_D13);
+ chThdSleepMilliseconds(500);
+ }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+ /*
+ * System initializations.
+ * - HAL initialization, this also initializes the configured device drivers
+ * and performs the board-specific initializations.
+ * - Kernel initialization, the main() function becomes a thread and the
+ * RTOS is active.
+ */
+ halInit();
+ chSysInit();
+
+ /*
+ * Activates the serial driver 2 using the driver default configuration.
+ */
+ sdStart(&SD2, NULL);
+
+ /*
+ * Starting GPT4 driver, it is used for triggering the ADC.
+ */
+ gptStart(&GPTD4, &gpt4cfg1);
+
+ /*
+ * Activates the ADC1 driver and the temperature sensor.
+ */
+ adcStart(&ADCD1, NULL);
+ adcSTM32EnableVREF(&ADCD1);
+ adcSTM32EnableTS(&ADCD1);
+
+ /*
+ * Starts an ADC continuous conversion triggered with a period of
+ * 1/1000000 second.
+ */
+ adcStartConversion(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH);
+ gptStartContinuous(&GPTD4, 100);
+
+ /*
+ * Creates the example thread.
+ */
+ chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+ /*
+ * Normal main() thread activity, in this demo it does nothing.
+ */
+ while (true) {
+ chThdSleepMilliseconds(500);
+ }
+}
|