From 7772ea4579a45bcf63ebd5e68be66ba1a9c72dfa Mon Sep 17 00:00:00 2001
From: Clyne Sullivan <tullivan99@gmail.com>
Date: Fri, 11 Nov 2016 15:02:17 -0500
Subject: chibios!

---
 .../community/demos/NRF51/OSHCHIP_V1.0/main.c      | 81 ++++++++++++++++++++++
 1 file changed, 81 insertions(+)
 create mode 100644 ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/main.c

(limited to 'ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/main.c')

diff --git a/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/main.c b/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/main.c
new file mode 100644
index 0000000..8e386fb
--- /dev/null
+++ b/ChibiOS_16.1.5/community/demos/NRF51/OSHCHIP_V1.0/main.c
@@ -0,0 +1,81 @@
+/*
+    Copyright (C) 2015 Fabio Utzig
+
+    Licensed under the Apache License, Version 2.0 (the "License");
+    you may not use this file except in compliance with the License.
+    You may obtain a copy of the License at
+
+        http://www.apache.org/licenses/LICENSE-2.0
+
+    Unless required by applicable law or agreed to in writing, software
+    distributed under the License is distributed on an "AS IS" BASIS,
+    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+    See the License for the specific language governing permissions and
+    limitations under the License.
+*/
+
+#include "ch.h"
+#include "hal.h"
+#include "ch_test.h"
+
+static THD_WORKING_AREA(waThread1, 64);
+static THD_FUNCTION(Thread1, arg) {
+  (void)arg;
+
+  uint8_t led = LED_RED;
+  chRegSetThreadName("Blinker");
+
+  while (1) {
+    palClearPad(IOPORT1, led);
+    chThdSleepMilliseconds(100);
+    palSetPad(IOPORT1, led);
+    switch(led) {
+      case LED_RED:
+        led = LED_GREEN;
+        break;
+      case LED_GREEN:
+        led = LED_BLUE;
+        break;
+      case LED_BLUE:
+        led = LED_RED;
+        break;
+    }
+  }
+}
+
+/*
+ * Application entry point.
+ */
+int main(void) {
+
+  SerialConfig serial_config = {
+    .speed = 38400,
+    .tx_pad = UART_TX,
+    .rx_pad = UART_RX,
+  };
+
+  /*
+   * System initializations.
+   * - HAL initialization, this also initializes the configured device drivers
+   *   and performs the board-specific initializations.
+   * - Kernel initialization, the main() function becomes a thread and the
+   *   RTOS is active.
+   */
+  halInit();
+  chSysInit();
+
+  /*
+   * Activates UART0 using the driver default configuration.
+   */
+  sdStart(&SD1, &serial_config);
+
+  /*
+   * Creates the blinker thread.
+   */
+  chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
+
+  test_execute((BaseSequentialStream *)&SD1);
+  while (1) {
+    chThdSleepMilliseconds(500);
+  }
+}
-- 
cgit v1.2.3