From 5a059c8d6ecfe2f98a77570b8b6cf13c500398f7 Mon Sep 17 00:00:00 2001 From: Clyne Sullivan Date: Fri, 11 Nov 2016 15:15:16 -0500 Subject: tar'd chibi --- .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/.cproject | 56 --- .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/.gitignore | 2 - .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/.project | 101 ---- .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/Makefile | 227 --------- .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/chconf.h | 522 --------------------- ...ISCOVERY-TRIBUF (OpenOCD, Flash and Run).launch | 52 -- ...429-DISCOVERY-TRIBUF (OpenOCD, Run Only).launch | 52 -- .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/halconf.h | 387 --------------- .../halconf_community.h | 99 ---- .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/main.c | 490 ------------------- .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/mcuconf.h | 367 --------------- .../mcuconf_community.h | 33 -- .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/readme.txt | 30 -- .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/usbcfg.c | 314 ------------- .../STM32/RT-STM32F429-DISCOVERY-TRIBUF/usbcfg.h | 25 - 15 files changed, 2757 deletions(-) delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.cproject delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.gitignore delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.project delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/Makefile delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/chconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Flash and Run).launch delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Run Only).launch delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/halconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/halconf_community.h delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/main.c delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/mcuconf.h delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/mcuconf_community.h delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/readme.txt delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/usbcfg.c delete mode 100644 ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/usbcfg.h (limited to 'ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF') diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.cproject b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.cproject deleted file mode 100644 index c63ab27..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.cproject +++ /dev/null @@ -1,56 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.gitignore b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.gitignore deleted file mode 100644 index 0a3664e..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -build/ -.dep/ diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.project b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.project deleted file mode 100644 index 71c5ff8..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/.project +++ /dev/null @@ -1,101 +0,0 @@ - - - STM32F429-DISCOVERY-TRIBUF - - - - - - org.eclipse.cdt.managedbuilder.core.genmakebuilder - clean,full,incremental, - - - ?name? - - - - org.eclipse.cdt.make.core.append_environment - true - - - org.eclipse.cdt.make.core.autoBuildTarget - all - - - org.eclipse.cdt.make.core.buildArguments - -j1 - - - org.eclipse.cdt.make.core.buildCommand - make - - - org.eclipse.cdt.make.core.cleanBuildTarget - clean - - - org.eclipse.cdt.make.core.contents - org.eclipse.cdt.make.core.activeConfigSettings - - - org.eclipse.cdt.make.core.enableAutoBuild - false - - - org.eclipse.cdt.make.core.enableCleanBuild - true - - - org.eclipse.cdt.make.core.enableFullBuild - true - - - org.eclipse.cdt.make.core.fullBuildTarget - all - - - org.eclipse.cdt.make.core.stopOnError - true - - - org.eclipse.cdt.make.core.useDefaultBuildCmd - true - - - - - org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder - full,incremental, - - - - - - org.eclipse.cdt.core.cnature - org.eclipse.cdt.managedbuilder.core.managedBuildNature - org.eclipse.cdt.managedbuilder.core.ScannerConfigNature - org.eclipse.cdt.core.ccnature - - - - os-community - 2 - copy_PARENT/os - - - os-git - 2 - copy_PARENT1/os - - - - - copy_PARENT - $%7BPARENT-1-CHIBIOS%7D/ChibiOS-Contrib - - - copy_PARENT1 - $%7BPARENT-1-copy_PARENT%7D - - - diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/Makefile b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/Makefile deleted file mode 100644 index 68fe855..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/Makefile +++ /dev/null @@ -1,227 +0,0 @@ -############################################################################## -# Build global options -# NOTE: Can be overridden externally. -# - -# Compiler options here. -ifeq ($(USE_OPT),) - USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 -endif - -# C specific options here (added to USE_OPT). -ifeq ($(USE_COPT),) - USE_COPT = -endif - -# C++ specific options here (added to USE_OPT). -ifeq ($(USE_CPPOPT),) - USE_CPPOPT = -fno-rtti -endif - -# Enable this if you want the linker to remove unused code and data -ifeq ($(USE_LINK_GC),) - USE_LINK_GC = yes -endif - -# Linker extra options here. -ifeq ($(USE_LDOPT),) - USE_LDOPT = -endif - -# Enable this if you want link time optimizations (LTO) -ifeq ($(USE_LTO),) - USE_LTO = no -endif - -# If enabled, this option allows to compile the application in THUMB mode. -ifeq ($(USE_THUMB),) - USE_THUMB = yes -endif - -# Enable this if you want to see the full log while compiling. -ifeq ($(USE_VERBOSE_COMPILE),) - USE_VERBOSE_COMPILE = no -endif - -# If enabled, this option makes the build process faster by not compiling -# modules not used in the current configuration. -ifeq ($(USE_SMART_BUILD),) - USE_SMART_BUILD = yes -endif - -# -# Build global options -############################################################################## - -############################################################################## -# Architecture or project specific options -# - -# Stack size to be allocated to the Cortex-M process stack. This stack is -# the stack used by the main() thread. -ifeq ($(USE_PROCESS_STACKSIZE),) - USE_PROCESS_STACKSIZE = 0x400 -endif - -# Stack size to the allocated to the Cortex-M main/exceptions stack. This -# stack is used for processing interrupts and exceptions. -ifeq ($(USE_EXCEPTIONS_STACKSIZE),) - USE_EXCEPTIONS_STACKSIZE = 0x400 -endif - -# Enables the use of FPU (no, softfp, hard). -ifeq ($(USE_FPU),) - USE_FPU = no -endif - -# -# Architecture or project specific options -############################################################################## - -############################################################################## -# Project, sources and paths -# - -# Define project name here -PROJECT = ch - -# Imported source files and paths -CHIBIOS = ../../../../ChibiOS-RT -CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib -# Startup files. -include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32f4xx.mk -# HAL-OSAL files (optional). -include $(CHIBIOS_CONTRIB)/os/hal/hal.mk -include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32F4xx/platform.mk -include $(CHIBIOS)/os/hal/boards/ST_STM32F429I_DISCOVERY/board.mk -include $(CHIBIOS)/os/hal/osal/rt/osal.mk -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk -# Other files (optional). -include $(CHIBIOS)/test/rt/test.mk -include $(CHIBIOS)/os/hal/lib/streams/streams.mk -include $(CHIBIOS)/os/various/shell/shell.mk - -# Define linker script file here -LDSCRIPT = $(STARTUPLD)/STM32F429xI.ld - -# C sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CSRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(TESTSRC) \ - $(STREAMSSRC) \ - $(SHELLSRC) \ - $(CHIBIOS_CONTRIB)/os/various/tribuf.c \ - usbcfg.c \ - main.c - -# C++ sources that can be compiled in ARM or THUMB mode depending on the global -# setting. -CPPSRC = - -# C sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACSRC = - -# C++ sources to be compiled in ARM mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -ACPPSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCSRC = - -# C sources to be compiled in THUMB mode regardless of the global setting. -# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler -# option that results in lower performance and larger code size. -TCPPSRC = - -# List ASM source files here -ASMSRC = -ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) - -INCDIR = $(CHIBIOS)/os/license \ - $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ - $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ - $(STREAMSINC) $(SHELLINC) \ - $(CHIBIOS)/os/various \ - $(CHIBIOS_CONTRIB)/os/various - -# -# Project, sources and paths -############################################################################## - -############################################################################## -# Compiler settings -# - -MCU = cortex-m4 - -#TRGT = arm-elf- -TRGT = arm-none-eabi- -CC = $(TRGT)gcc -CPPC = $(TRGT)g++ -# Enable loading with g++ only if you need C++ runtime support. -# NOTE: You can use C++ even without C++ support if you are careful. C++ -# runtime support makes code size explode. -LD = $(TRGT)gcc -#LD = $(TRGT)g++ -CP = $(TRGT)objcopy -AS = $(TRGT)gcc -x assembler-with-cpp -AR = $(TRGT)ar -OD = $(TRGT)objdump -SZ = $(TRGT)size -HEX = $(CP) -O ihex -BIN = $(CP) -O binary - -# ARM-specific options here -AOPT = - -# THUMB-specific options here -TOPT = -mthumb -DTHUMB - -# Define C warning options here -CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes - -# Define C++ warning options here -CPPWARN = -Wall -Wextra -Wundef - -# -# Compiler settings -############################################################################## - -############################################################################## -# Start of user section -# - -# List all user C define here, like -D_DEBUG=1 -UDEFS = - -# Define ASM defines here -UADEFS = - -# List all user directories here -UINCDIR = - -# List the user directory to look for the libraries here -ULIBDIR = - -# List all user libraries here -ULIBS = - -# -# End of user defines -############################################################################## - -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/chconf.h b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/chconf.h deleted file mode 100644 index 9a33ce5..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/chconf.h +++ /dev/null @@ -1,522 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#define CH_CFG_ST_RESOLUTION 32 - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#define CH_CFG_ST_FREQUENCY 1000 - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#define CH_CFG_ST_TIMEDELTA 0 - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#define CH_CFG_TIME_QUANTUM 0 - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#define CH_CFG_MEMCORE_SIZE 0 - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#define CH_CFG_NO_IDLE_THREAD FALSE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#define CH_CFG_OPTIMIZE_SPEED TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_TM TRUE - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_REGISTRY TRUE - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_WAITEXIT TRUE - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_SEMAPHORES TRUE - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MUTEXES TRUE - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#define CH_CFG_USE_CONDVARS FALSE - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_EVENTS TRUE - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MESSAGES FALSE - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#define CH_CFG_USE_MAILBOXES FALSE - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMCORE TRUE - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#define CH_CFG_USE_HEAP TRUE - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#define CH_CFG_USE_MEMPOOLS FALSE - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#define CH_CFG_USE_DYNAMIC TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_STATISTICS TRUE - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_SYSTEM_STATE_CHECK TRUE - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_CHECKS TRUE - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_ENABLE_ASSERTS TRUE - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#define CH_DBG_TRACE_BUFFER_SIZE 128 - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#define CH_DBG_ENABLE_STACK_CHECK TRUE - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#define CH_DBG_FILL_THREADS TRUE - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#define CH_DBG_THREADS_PROFILING TRUE - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p chThdInit() API. - * - * @note It is invoked from within @p chThdInit() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#define TRIBUF_USE_WAIT TRUE - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Flash and Run).launch b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Flash and Run).launch deleted file mode 100644 index 58dd0ea..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Flash and Run).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Run Only).launch b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Run Only).launch deleted file mode 100644 index ff16f51..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/debug/RT-STM32F429-DISCOVERY-TRIBUF (OpenOCD, Run Only).launch +++ /dev/null @@ -1,52 +0,0 @@ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/halconf.h b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/halconf.h deleted file mode 100644 index ebe3af9..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/halconf.h +++ /dev/null @@ -1,387 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EXT subsystem. - */ -#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) -#define HAL_USE_EXT FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB TRUE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 115200 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* Community drivers' includes */ -/*===========================================================================*/ - -#include "halconf_community.h" - -#endif /* HALCONF_H */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/halconf_community.h b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/halconf_community.h deleted file mode 100644 index cf1289f..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/halconf_community.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _HALCONF_COMMUNITY_H_ -#define _HALCONF_COMMUNITY_H_ - -/** - * @brief Enables the community overlay. - */ -#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) -#define HAL_USE_COMMUNITY TRUE -#endif - -/** - * @brief Enables the FSMC subsystem. - */ -#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) -#define HAL_USE_FSMC FALSE -#endif - -/** - * @brief Enables the NAND subsystem. - */ -#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) -#define HAL_USE_NAND FALSE -#endif - -/** - * @brief Enables the 1-wire subsystem. - */ -#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) -#define HAL_USE_ONEWIRE FALSE -#endif - -/** - * @brief Enables the EICU subsystem. - */ -#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) -#define HAL_USE_EICU FALSE -#endif - -/** - * @brief Enables the CRC subsystem. - */ -#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) -#define HAL_USE_CRC FALSE -#endif - -/** - * @brief Enables the RNG subsystem. - */ -#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) -#define HAL_USE_RNG FALSE -#endif - - -/*===========================================================================*/ -/* FSMCNAND driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define NAND_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* 1-wire driver related settings. */ -/*===========================================================================*/ -/** - * @brief Enables strong pull up feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_STRONG_PULLUP FALSE - -/** - * @brief Enables search ROM feature. - * @note Disabling this option saves both code and data space. - */ -#define ONEWIRE_USE_SEARCH_ROM TRUE - -#endif /* _HALCONF_COMMUNITY_H_ */ - -/** @} */ diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/main.c b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/main.c deleted file mode 100644 index a7a33f6..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/main.c +++ /dev/null @@ -1,490 +0,0 @@ -/* - Copyright (C) 2013-2015 Andrea Zoppi - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -#include "chprintf.h" -#include "shell.h" -#if (HAL_USE_SERIAL_USB == TRUE) -#include "usbcfg.h" -#endif - -#include "tribuf.h" -#include -#include - -#if (HAL_USE_SERIAL_USB == TRUE) -/* Virtual serial port over USB.*/ -SerialUSBDriver SDU1; -static BaseSequentialStream *const chout = (BaseSequentialStream *)&SDU1; -#else -static BaseSequentialStream *const chout = (BaseSequentialStream *)&SD1; -#endif - -/*===========================================================================*/ -/* Triple buffer related. */ -/*===========================================================================*/ - -#define READER_STACK_SIZE 256 -#define READER_WA_SIZE THD_WORKING_AREA_SIZE(READER_STACK_SIZE) -#define READER_DELAY_MS 200 -#define READER_PRIORITY (NORMALPRIO + 2) - -#define WRITER_STACK_SIZE 256 -#define WRITER_WA_SIZE THD_WORKING_AREA_SIZE(WRITER_STACK_SIZE) -#define WRITER_DELAY_MS 100 -#define WRITER_PRIORITY (NORMALPRIO + 1) - -static thread_t *reader_tp; -static uint16_t reader_delay = READER_DELAY_MS; -static tprio_t reader_priority = READER_PRIORITY; -static bool reader_suspend = false; -static systime_t reader_timeout = TIME_INFINITE; - -static thread_t *writer_tp; -static uint16_t writer_delay = WRITER_DELAY_MS; -static tprio_t writer_priority = WRITER_PRIORITY; -static bool writer_suspend = false; - -static tribuf_t tribuf_handler; -static char buffer_a, buffer_b, buffer_c; - -static const char text[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZ\r\n"; - -/** - * @brief Reads from the front buffer. - * - * @return Buffered character from @p text or special symbol. - * @retval '.' No new front buffer within timeout. - */ -static char read_front(void) { - - const char *front; - msg_t error; - char c; - - /* Wait until a new front buffer gets available with prepared data */ - error = tribufWaitReadyTimeout(&tribuf_handler, reader_timeout); - if (error == MSG_OK) { - /* Retrieve the new front buffer */ - tribufSwapFront(&tribuf_handler); - front = (const char *)tribufGetFront(&tribuf_handler); - - /* Read data from the new front buffer */ - c = front[0]; - } else { - c = '.'; /* Timeout placeholder */ - } - return c; -} - -/* - * @brief Overwrites the back buffer with the provided character. - * - * @param[in] c Character to store into the current back buffer. - */ -static void write_back(char c) { - - char *back; - - /* Retrieve the current back buffer */ - back = (char *)tribufGetBack(&tribuf_handler); - - /* Prepare data onto the current back buffer */ - back[0] = c; - - /* Exchange the prepared buffer with a new one */ - tribufSwapBack(&tribuf_handler); -} - -/* - * Reads the front buffer and prints it. - */ -static THD_WORKING_AREA(reader_wa, READER_STACK_SIZE); -static THD_FUNCTION(reader_thread, arg) { - - thread_reference_t thread_ref; - tprio_t old_priority; - char c; - (void)arg; - - chRegSetThreadName("reader_thread"); - old_priority = chThdGetPriorityX(); - - for (;;) { - /* Read from the fron buffer and print the retrieved character */ - c = read_front(); - chprintf(chout, "%c", c); - - /* Change priority, suspend or delay */ - osalSysLock(); - palTogglePad(GPIOG, GPIOG_LED3_GREEN); - if (old_priority != reader_priority) { - chThdSetPriority(reader_priority); - } - if (reader_suspend) { - thread_ref = NULL; - osalThreadSuspendS(&thread_ref); - reader_suspend = false; - } else { - osalThreadSleepS(MS2ST(reader_delay)); - } - old_priority = chThdGetPriorityX(); - osalSysUnlock(); - } -} - -/* - * Overwrites the back buffer with a fixed text, character by character. - */ -static THD_WORKING_AREA(writer_wa, WRITER_STACK_SIZE); -static THD_FUNCTION(writer_thread, arg) { - - thread_reference_t thread_ref; - tprio_t old_priority; - size_t i; - char c; - (void)arg; - - chRegSetThreadName("writer_thread"); - old_priority = chThdGetPriorityX(); - - for (;;) { - for (i = 0; i < sizeof(text); ++i) { - /* Write the next character on the current back buffer */ - c = text[i]; - write_back(c); - - /* Change priority, suspend or delay */ - osalSysLock(); - palTogglePad(GPIOG, GPIOG_LED4_RED); - if (old_priority != writer_priority) { - chThdSetPriority(writer_priority); - } - if (writer_suspend) { - thread_ref = NULL; - osalThreadSuspendS(&thread_ref); - writer_suspend = false; - } else { - osalThreadSleepS(MS2ST(writer_delay)); - } - osalSysUnlock(); - } - } -} - -/*===========================================================================*/ -/* Command line related. */ -/*===========================================================================*/ - -#define streq(s1, s2) (strcmp((s1), (s2)) == 0) - -#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) -#define TEST_WA_SIZE THD_WORKING_AREA_SIZE(256) - -static void cmd_reset(BaseSequentialStream *chp, int argc, char *argv[]) { - - (void)argv; - - if (argc > 0) { - chprintf(chp, "Usage: reset\r\n"); - return; - } - - chprintf(chp, "Will reset in 200ms\r\n"); - chThdSleepMilliseconds(200); - NVIC_SystemReset(); -} - -static void cmd_run(BaseSequentialStream *chp, int argc, char *argv[]) { - - thread_reference_t thread_ref; - const char *const usage = "Usage: run (reader|writer)\r\n"; - - if (argc != 1) { - chprintf(chp, usage); - return; - } - - if (streq(argv[0], "reader")) { - osalSysLock(); - if (reader_suspend) { - thread_ref = (thread_reference_t)reader_tp; - osalThreadResumeS(&thread_ref, MSG_OK); - } - osalSysUnlock(); - } - else if (streq(argv[0], "writer")) { - osalSysLock(); - if (writer_suspend) { - thread_ref = (thread_reference_t)writer_tp; - osalThreadResumeS(&thread_ref, MSG_OK); - } - osalSysUnlock(); - } - else { - chprintf(chp, usage); - } -} - -static void cmd_stop(BaseSequentialStream *chp, int argc, char *argv[]) { - - const char *const usage = "Usage: stop (reader|writer)\r\n"; - - if (argc != 1) { - chprintf(chp, usage); - return; - } - - if (streq(argv[0], "reader")) { - osalSysLock(); - reader_suspend = true; - osalSysUnlock(); - } - else if (streq(argv[0], "writer")) { - osalSysLock(); - writer_suspend = true; - osalSysUnlock(); - } - else { - chprintf(chp, usage); - } -} - -static void cmd_delay(BaseSequentialStream *chp, int argc, char *argv[]) { - - const char *const usage = "Usage: delay (reader|writer) DELAY_MS\r\n"; - uint16_t delay; - - if (argc != 2) { - chprintf(chp, usage); - return; - } - delay = (uint16_t)atoi(argv[1]); - - if (streq(argv[0], "reader")) { - osalSysLock(); - reader_delay = delay; - osalSysUnlock(); - } - else if (streq(argv[0], "writer")) { - osalSysLock(); - writer_delay = delay; - osalSysUnlock(); - } - else { - chprintf(chp, usage); - } -} - -static void cmd_priority(BaseSequentialStream *chp, int argc, char *argv[]) { - - const char *const usage = - "Usage: priority (reader|writer) THREAD_PRIORITY\r\n"; - tprio_t priority; - - if (argc != 2) { - chprintf(chp, usage); - return; - } - priority = (tprio_t)atoi(argv[1]); - - if (streq(argv[0], "reader")) { - osalSysLock(); - reader_priority = priority; - osalSysUnlock(); - } - else if (streq(argv[0], "writer")) { - osalSysLock(); - writer_priority = priority; - osalSysUnlock(); - } - else { - chprintf(chp, usage); - } -} - -static void cmd_timeout(BaseSequentialStream *chp, int argc, char *argv[]) { - - const char *const usage = "Usage: timeout TIMEOUT_MS\r\n"; - systime_t timeout; - - if (argc != 1) { - chprintf(chp, usage); - return; - } - - if (streq(argv[0], "-")) - timeout = TIME_IMMEDIATE; - else if (streq(argv[0], "*")) - timeout = TIME_INFINITE; - else - timeout = (systime_t)atoi(argv[0]); - - osalSysLock(); - reader_timeout = timeout; - osalSysUnlock(); -} - -static void cmd_params(BaseSequentialStream *chp, int argc, char *argv[]) { - - const char *const usage = "Usage: params\r\n"; - - uint32_t reader_delay_; - uint32_t reader_priority_; - uint32_t reader_suspend_; - uint32_t reader_timeout_; - - uint32_t writer_delay_; - uint32_t writer_priority_; - uint32_t writer_suspend_; - - (void)argv; - if (argc != 0) { - chprintf(chp, usage); - return; - } - - osalSysLock(); - reader_delay_ = (uint32_t)reader_delay; - reader_priority_ = (uint32_t)reader_priority; - reader_suspend_ = (uint32_t)reader_suspend; - reader_timeout_ = (uint32_t)reader_timeout; - - writer_delay_ = (uint32_t)writer_delay; - writer_priority_ = (uint32_t)writer_priority; - writer_suspend_ = (uint32_t)writer_suspend; - osalSysUnlock(); - - chprintf(chp, "reader_delay %U\r\n", reader_delay_); - chprintf(chp, "reader_priority %U\r\n", reader_priority_); - chprintf(chp, "reader_suspend %U\r\n", reader_suspend_); - if (reader_timeout_ == TIME_IMMEDIATE) - chprintf(chp, "reader_timeout -\r\n"); - if (reader_timeout_ == TIME_INFINITE) - chprintf(chp, "reader_timeout *\r\n"); - else - chprintf(chp, "reader_timeout %U\r\n", reader_timeout_); - - chprintf(chp, "writer_delay %U\r\n", writer_delay_); - chprintf(chp, "writer_priority %U\r\n", writer_priority_); - chprintf(chp, "writer_suspend %U\r\n", writer_suspend_); -} - -static const ShellCommand commands[] = { - {"reset", cmd_reset}, - {"run", cmd_run}, - {"stop", cmd_stop}, - {"delay", cmd_delay}, - {"priority", cmd_priority}, - {"timeout", cmd_timeout}, - {"params", cmd_params}, - {NULL, NULL} -}; - -static const ShellConfig shell_cfg1 = { -#if (HAL_USE_SERIAL_USB == TRUE) - (BaseSequentialStream *)&SDU1, -#else - (BaseSequentialStream *)&SD1, -#endif - commands -}; - -/*===========================================================================*/ -/* Initialization and main thread. */ -/*===========================================================================*/ - -/* - * Application entry point. - */ -int main(void) { - - thread_t *shelltp = NULL; - - /* - * System initializations. - * - HAL initialization, this also initializes the configured device drivers - * and performs the board-specific initializations. - * - Kernel initialization, the main() function becomes a thread and the - * RTOS is active. - */ - halInit(); - chSysInit(); - -#if (HAL_USE_SERIAL_USB == TRUE) - /* - * Initializes a serial-over-USB CDC driver. - */ - sduObjectInit(&SDU1); - sduStart(&SDU1, &serusbcfg); - - /* - * Activates the USB driver and then the USB bus pull-up on D+. - * Note, a delay is inserted in order to not have to disconnect the cable - * after a reset. - */ - usbDisconnectBus(serusbcfg.usbp); - chThdSleepMilliseconds(1000); - usbStart(serusbcfg.usbp, &usbcfg); - usbConnectBus(serusbcfg.usbp); -#else - /* - * Initializes serial port. - */ - sdStart(&SD1, NULL); -#endif /* HAL_USE_SERIAL_USB */ - - /* - * Writer and reader threads started for triple buffer demo. - */ - tribufObjectInit(&tribuf_handler, &buffer_a, &buffer_b, &buffer_c); - - reader_tp = chThdCreateStatic(reader_wa, READER_WA_SIZE, - reader_priority, reader_thread, NULL); - - writer_tp = chThdCreateStatic(writer_wa, WRITER_WA_SIZE, - writer_priority, writer_thread, NULL); - - /* - * Normal main() thread activity, in this demo it just performs - * a shell respawn upon its termination. - */ - for (;;) { - if (!shelltp) { -#if (HAL_USE_SERIAL_USB == TRUE) - if (SDU1.config->usbp->state == USB_ACTIVE) { - /* Spawns a new shell.*/ - shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE, "shell", NORMALPRIO, shellThread, (void *) &shell_cfg1); - } -#else - shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE, "shell", NORMALPRIO, shellThread, (void *) &shell_cfg1); -#endif - } - else { - /* If the previous shell exited.*/ - if (chThdTerminatedX(shelltp)) { - /* Recovers memory of the previous shell.*/ - chThdRelease(shelltp); - shelltp = NULL; - } - } - chThdSleepMilliseconds(500); - } - return 0; -} - diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/mcuconf.h b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/mcuconf.h deleted file mode 100644 index ec65ff7..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/mcuconf.h +++ /dev/null @@ -1,367 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef MCUCONF_H -#define MCUCONF_H - -/* - * STM32F4xx drivers configuration. - * The following settings override the default settings present in - * the various device driver implementation headers. - * Note that the settings for each driver only have effect if the whole - * driver is enabled in halconf.h. - * - * IRQ priorities: - * 15...0 Lowest...Highest. - * - * DMA priorities: - * 0...3 Lowest...Highest. - */ - -#define STM32F4xx_MCUCONF - -/* - * HAL driver system settings. - */ -#define STM32_NO_INIT FALSE -#define STM32_HSI_ENABLED TRUE -#define STM32_LSI_ENABLED TRUE -#define STM32_HSE_ENABLED TRUE -#define STM32_LSE_ENABLED FALSE -#define STM32_CLOCK48_REQUIRED TRUE -#define STM32_SW STM32_SW_PLL -#define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 8 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 2 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 -#define STM32_RTCSEL STM32_RTCSEL_LSI -#define STM32_RTCPRE_VALUE 8 -#define STM32_MCO1SEL STM32_MCO1SEL_HSI -#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 -#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK -#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 -#define STM32_I2SSRC STM32_I2SSRC_CKIN -#define STM32_PLLI2SN_VALUE 192 -#define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE -#define STM32_SAISRC STM32_SAISRC_PLL -#define STM32_PLLSAIN_VALUE 192 -#define STM32_PLLSAIQ_VALUE 7 -#define STM32_PLLSAIR_VALUE 4 -#define STM32_PLLSAIR_POST STM32_SAIR_DIV4 - -/* - * ADC driver system settings. - */ -#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 -#define STM32_ADC_USE_ADC1 FALSE -#define STM32_ADC_USE_ADC2 FALSE -#define STM32_ADC_USE_ADC3 FALSE -#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_ADC_ADC1_DMA_PRIORITY 2 -#define STM32_ADC_ADC2_DMA_PRIORITY 2 -#define STM32_ADC_ADC3_DMA_PRIORITY 2 -#define STM32_ADC_IRQ_PRIORITY 6 -#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 -#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 - -/* - * CAN driver system settings. - */ -#define STM32_CAN_USE_CAN1 FALSE -#define STM32_CAN_USE_CAN2 FALSE -#define STM32_CAN_CAN1_IRQ_PRIORITY 11 -#define STM32_CAN_CAN2_IRQ_PRIORITY 11 - -/* - * DAC driver system settings. - */ -#define STM32_DAC_DUAL_MODE FALSE -#define STM32_DAC_USE_DAC1_CH1 FALSE -#define STM32_DAC_USE_DAC1_CH2 FALSE -#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 -#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 -#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) - -/* - * EXT driver system settings. - */ -#define STM32_EXT_EXTI0_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI1_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI2_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI3_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI4_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI5_9_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI10_15_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI16_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI17_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI18_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI19_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI20_IRQ_PRIORITY 6 -#define STM32_EXT_EXTI21_IRQ_PRIORITY 15 -#define STM32_EXT_EXTI22_IRQ_PRIORITY 15 - -/* - * GPT driver system settings. - */ -#define STM32_GPT_USE_TIM1 FALSE -#define STM32_GPT_USE_TIM2 FALSE -#define STM32_GPT_USE_TIM3 FALSE -#define STM32_GPT_USE_TIM4 FALSE -#define STM32_GPT_USE_TIM5 FALSE -#define STM32_GPT_USE_TIM6 FALSE -#define STM32_GPT_USE_TIM7 FALSE -#define STM32_GPT_USE_TIM8 FALSE -#define STM32_GPT_USE_TIM9 FALSE -#define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_USE_TIM12 FALSE -#define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 - -/* - * I2C driver system settings. - */ -#define STM32_I2C_USE_I2C1 FALSE -#define STM32_I2C_USE_I2C2 FALSE -#define STM32_I2C_USE_I2C3 FALSE -#define STM32_I2C_BUSY_TIMEOUT 50 -#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2C_I2C1_IRQ_PRIORITY 5 -#define STM32_I2C_I2C2_IRQ_PRIORITY 5 -#define STM32_I2C_I2C3_IRQ_PRIORITY 5 -#define STM32_I2C_I2C1_DMA_PRIORITY 3 -#define STM32_I2C_I2C2_DMA_PRIORITY 3 -#define STM32_I2C_I2C3_DMA_PRIORITY 3 -#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") - -/* - * I2S driver system settings. - */ -#define STM32_I2S_USE_SPI2 FALSE -#define STM32_I2S_USE_SPI3 FALSE -#define STM32_I2S_SPI2_IRQ_PRIORITY 10 -#define STM32_I2S_SPI3_IRQ_PRIORITY 10 -#define STM32_I2S_SPI2_DMA_PRIORITY 1 -#define STM32_I2S_SPI3_DMA_PRIORITY 1 -#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") - -/* - * ICU driver system settings. - */ -#define STM32_ICU_USE_TIM1 FALSE -#define STM32_ICU_USE_TIM2 FALSE -#define STM32_ICU_USE_TIM3 FALSE -#define STM32_ICU_USE_TIM4 FALSE -#define STM32_ICU_USE_TIM5 FALSE -#define STM32_ICU_USE_TIM8 FALSE -#define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 - -/* - * MAC driver system settings. - */ -#define STM32_MAC_TRANSMIT_BUFFERS 2 -#define STM32_MAC_RECEIVE_BUFFERS 4 -#define STM32_MAC_BUFFERS_SIZE 1522 -#define STM32_MAC_PHY_TIMEOUT 100 -#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE -#define STM32_MAC_ETH1_IRQ_PRIORITY 13 -#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 - -/* - * PWM driver system settings. - */ -#define STM32_PWM_USE_ADVANCED FALSE -#define STM32_PWM_USE_TIM1 FALSE -#define STM32_PWM_USE_TIM2 FALSE -#define STM32_PWM_USE_TIM3 FALSE -#define STM32_PWM_USE_TIM4 FALSE -#define STM32_PWM_USE_TIM5 FALSE -#define STM32_PWM_USE_TIM8 FALSE -#define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 - -/* - * SDC driver system settings. - */ -#define STM32_SDC_SDIO_DMA_PRIORITY 3 -#define STM32_SDC_SDIO_IRQ_PRIORITY 9 -#define STM32_SDC_WRITE_TIMEOUT_MS 250 -#define STM32_SDC_READ_TIMEOUT_MS 25 -#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 -#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE -#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) - -/* - * SERIAL driver system settings. - */ -#define STM32_SERIAL_USE_USART1 FALSE -#define STM32_SERIAL_USE_USART2 FALSE -#define STM32_SERIAL_USE_USART3 FALSE -#define STM32_SERIAL_USE_UART4 FALSE -#define STM32_SERIAL_USE_UART5 FALSE -#define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 - -/* - * SPI driver system settings. - */ -#define STM32_SPI_USE_SPI1 FALSE -#define STM32_SPI_USE_SPI2 FALSE -#define STM32_SPI_USE_SPI3 FALSE -#define STM32_SPI_USE_SPI4 FALSE -#define STM32_SPI_USE_SPI5 FALSE -#define STM32_SPI_USE_SPI6 FALSE -#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_SPI_SPI4_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) -#define STM32_SPI_SPI4_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) -#define STM32_SPI_SPI5_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) -#define STM32_SPI_SPI5_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) -#define STM32_SPI_SPI6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6) -#define STM32_SPI_SPI6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_SPI_SPI1_DMA_PRIORITY 1 -#define STM32_SPI_SPI2_DMA_PRIORITY 1 -#define STM32_SPI_SPI3_DMA_PRIORITY 1 -#define STM32_SPI_SPI4_DMA_PRIORITY 1 -#define STM32_SPI_SPI5_DMA_PRIORITY 1 -#define STM32_SPI_SPI6_DMA_PRIORITY 1 -#define STM32_SPI_SPI1_IRQ_PRIORITY 10 -#define STM32_SPI_SPI2_IRQ_PRIORITY 10 -#define STM32_SPI_SPI3_IRQ_PRIORITY 10 -#define STM32_SPI_SPI4_IRQ_PRIORITY 10 -#define STM32_SPI_SPI5_IRQ_PRIORITY 10 -#define STM32_SPI_SPI6_IRQ_PRIORITY 10 -#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") - -/* - * ST driver system settings. - */ -#define STM32_ST_IRQ_PRIORITY 8 -#define STM32_ST_USE_TIMER 2 - -/* - * UART driver system settings. - */ -#define STM32_UART_USE_USART1 FALSE -#define STM32_UART_USE_USART2 FALSE -#define STM32_UART_USE_USART3 FALSE -#define STM32_UART_USE_UART4 FALSE -#define STM32_UART_USE_UART5 FALSE -#define STM32_UART_USE_USART6 FALSE -#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) -#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) -#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) -#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) -#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) -#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) -#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) -#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) -#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) -#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) -#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 -#define STM32_UART_USART1_DMA_PRIORITY 0 -#define STM32_UART_USART2_DMA_PRIORITY 0 -#define STM32_UART_USART3_DMA_PRIORITY 0 -#define STM32_UART_UART4_DMA_PRIORITY 0 -#define STM32_UART_UART5_DMA_PRIORITY 0 -#define STM32_UART_USART6_DMA_PRIORITY 0 -#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") - -/* - * USB driver system settings. - */ -#define STM32_USB_USE_OTG1 FALSE -#define STM32_USB_USE_OTG2 TRUE -#define STM32_USB_OTG1_IRQ_PRIORITY 14 -#define STM32_USB_OTG2_IRQ_PRIORITY 14 -#define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 - -/* - * WDG driver system settings. - */ -#define STM32_WDG_USE_IWDG FALSE - -/* - * Header for community drivers. - */ -#include "mcuconf_community.h" - -#endif /* MCUCONF_H */ diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/mcuconf_community.h b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/mcuconf_community.h deleted file mode 100644 index f9f7aa7..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/mcuconf_community.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/* - * FSMC driver system settings. - */ -#define STM32_FSMC_USE_FSMC1 FALSE -#define STM32_FSMC_FSMC1_IRQ_PRIORITY 10 - -/* - * FSMC SDRAM driver system settings. - */ -#define STM32_USE_FSMC_SDRAM FALSE -#define STM32_SDRAM_USE_FSMC_SDRAM1 FALSE -#define STM32_SDRAM_USE_FSMC_SDRAM2 FALSE - -/* - * FSMC SRAM driver system settings. - */ -#define STM32_USE_FSMC_SRAM FALSE diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/readme.txt b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/readme.txt deleted file mode 100644 index cc7f406..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/readme.txt +++ /dev/null @@ -1,30 +0,0 @@ -***************************************************************************** -** ChibiOS/RT port for ARM-Cortex-M4 STM32F429. ** -***************************************************************************** - -** TARGET ** - -The demo runs on an ST STM32F429I-Discovery board. - -** The Demo ** - -This demo shows how to use a triple buffer handler, with one writer thread and -one reader thread. -The writer thread puts a character into the current back buffer, thus swapping -the back buffer with the orphan buffer for a new write. The writer then sleeps -for a specified delay in milliseconds. -The reader thread gets waits (if there is a timeout) until the orphan buffer -contains available data, becoming the new front buffer. The character is read -from the new front buffer and printed. The reader then sleeps for a specified -delay in milliseconds. -A simple command shell is activated on virtual serial port SD1 or SDU1. -Via command line it is possible to start, stop, set the delay, and set the -thread priority of the reader and writer threads. -The reader can also be assigned a wait timeout in milliseconds, with special -cases of "*" for infinite timeout, and "-" (or 0 ms) for none. - -** Build Procedure ** - -The demo has been tested by using the free GNU Tools ARM Embedded toolchain -and ChibiStudio. Just modify the TRGT line in the makefile in order to use -different GCC toolchains. diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/usbcfg.c b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/usbcfg.c deleted file mode 100644 index 9f95a2a..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/usbcfg.c +++ /dev/null @@ -1,314 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "ch.h" -#include "hal.h" - -/* - * Endpoints to be used for USBD2. - */ -#define USBD2_DATA_REQUEST_EP 1 -#define USBD2_DATA_AVAILABLE_EP 1 -#define USBD2_INTERRUPT_REQUEST_EP 2 - -/* - * USB Device Descriptor. - */ -static const uint8_t vcom_device_descriptor_data[18] = { - USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ - 0x02, /* bDeviceClass (CDC). */ - 0x00, /* bDeviceSubClass. */ - 0x00, /* bDeviceProtocol. */ - 0x40, /* bMaxPacketSize. */ - 0x0483, /* idVendor (ST). */ - 0x5740, /* idProduct. */ - 0x0200, /* bcdDevice. */ - 1, /* iManufacturer. */ - 2, /* iProduct. */ - 3, /* iSerialNumber. */ - 1) /* bNumConfigurations. */ -}; - -/* - * Device Descriptor wrapper. - */ -static const USBDescriptor vcom_device_descriptor = { - sizeof vcom_device_descriptor_data, - vcom_device_descriptor_data -}; - -/* Configuration Descriptor tree for a CDC.*/ -static const uint8_t vcom_configuration_descriptor_data[67] = { - /* Configuration Descriptor.*/ - USB_DESC_CONFIGURATION(67, /* wTotalLength. */ - 0x02, /* bNumInterfaces. */ - 0x01, /* bConfigurationValue. */ - 0, /* iConfiguration. */ - 0xC0, /* bmAttributes (self powered). */ - 50), /* bMaxPower (100mA). */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x01, /* bNumEndpoints. */ - 0x02, /* bInterfaceClass (Communications - Interface Class, CDC section - 4.2). */ - 0x02, /* bInterfaceSubClass (Abstract - Control Model, CDC section 4.3). */ - 0x01, /* bInterfaceProtocol (AT commands, - CDC section 4.4). */ - 0), /* iInterface. */ - /* Header Functional Descriptor (CDC section 5.2.3).*/ - USB_DESC_BYTE (5), /* bLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header - Functional Descriptor. */ - USB_DESC_BCD (0x0110), /* bcdCDC. */ - /* Call Management Functional Descriptor. */ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ - USB_DESC_BYTE (0x01), /* bDataInterface. */ - /* ACM Functional Descriptor.*/ - USB_DESC_BYTE (4), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract - Control Management Descriptor). */ - USB_DESC_BYTE (0x02), /* bmCapabilities. */ - /* Union Functional Descriptor.*/ - USB_DESC_BYTE (5), /* bFunctionLength. */ - USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ - USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union - Functional Descriptor). */ - USB_DESC_BYTE (0x00), /* bMasterInterface (Communication - Class Interface). */ - USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class - Interface). */ - /* Endpoint 2 Descriptor.*/ - USB_DESC_ENDPOINT (USBD2_INTERRUPT_REQUEST_EP|0x80, - 0x03, /* bmAttributes (Interrupt). */ - 0x0008, /* wMaxPacketSize. */ - 0xFF), /* bInterval. */ - /* Interface Descriptor.*/ - USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ - 0x00, /* bAlternateSetting. */ - 0x02, /* bNumEndpoints. */ - 0x0A, /* bInterfaceClass (Data Class - Interface, CDC section 4.5). */ - 0x00, /* bInterfaceSubClass (CDC section - 4.6). */ - 0x00, /* bInterfaceProtocol (CDC section - 4.7). */ - 0x00), /* iInterface. */ - /* Endpoint 3 Descriptor.*/ - USB_DESC_ENDPOINT (USBD2_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00), /* bInterval. */ - /* Endpoint 1 Descriptor.*/ - USB_DESC_ENDPOINT (USBD2_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ - 0x02, /* bmAttributes (Bulk). */ - 0x0040, /* wMaxPacketSize. */ - 0x00) /* bInterval. */ -}; - -/* - * Configuration Descriptor wrapper. - */ -static const USBDescriptor vcom_configuration_descriptor = { - sizeof vcom_configuration_descriptor_data, - vcom_configuration_descriptor_data -}; - -/* - * U.S. English language identifier. - */ -static const uint8_t vcom_string0[] = { - USB_DESC_BYTE(4), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ -}; - -/* - * Vendor string. - */ -static const uint8_t vcom_string1[] = { - USB_DESC_BYTE(38), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'S', 0, 'T', 0, 'M', 0, 'i', 0, 'c', 0, 'r', 0, 'o', 0, 'e', 0, - 'l', 0, 'e', 0, 'c', 0, 't', 0, 'r', 0, 'o', 0, 'n', 0, 'i', 0, - 'c', 0, 's', 0 -}; - -/* - * Device Description string. - */ -static const uint8_t vcom_string2[] = { - USB_DESC_BYTE(56), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - 'C', 0, 'h', 0, 'i', 0, 'b', 0, 'i', 0, 'O', 0, 'S', 0, '/', 0, - 'R', 0, 'T', 0, ' ', 0, 'V', 0, 'i', 0, 'r', 0, 't', 0, 'u', 0, - 'a', 0, 'l', 0, ' ', 0, 'C', 0, 'O', 0, 'M', 0, ' ', 0, 'P', 0, - 'o', 0, 'r', 0, 't', 0 -}; - -/* - * Serial Number string. - */ -static const uint8_t vcom_string3[] = { - USB_DESC_BYTE(8), /* bLength. */ - USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ - '0' + CH_KERNEL_MAJOR, 0, - '0' + CH_KERNEL_MINOR, 0, - '0' + CH_KERNEL_PATCH, 0 -}; - -/* - * Strings wrappers array. - */ -static const USBDescriptor vcom_strings[] = { - {sizeof vcom_string0, vcom_string0}, - {sizeof vcom_string1, vcom_string1}, - {sizeof vcom_string2, vcom_string2}, - {sizeof vcom_string3, vcom_string3} -}; - -/* - * Handles the GET_DESCRIPTOR callback. All required descriptors must be - * handled here. - */ -static const USBDescriptor *get_descriptor(USBDriver *usbp, - uint8_t dtype, - uint8_t dindex, - uint16_t lang) { - - (void)usbp; - (void)lang; - switch (dtype) { - case USB_DESCRIPTOR_DEVICE: - return &vcom_device_descriptor; - case USB_DESCRIPTOR_CONFIGURATION: - return &vcom_configuration_descriptor; - case USB_DESCRIPTOR_STRING: - if (dindex < 4) - return &vcom_strings[dindex]; - } - return NULL; -} - -/** - * @brief IN EP1 state. - */ -static USBInEndpointState ep1instate; - -/** - * @brief OUT EP1 state. - */ -static USBOutEndpointState ep1outstate; - -/** - * @brief EP1 initialization structure (both IN and OUT). - */ -static const USBEndpointConfig ep1config = { - USB_EP_MODE_TYPE_BULK, - NULL, - sduDataTransmitted, - sduDataReceived, - 0x0040, - 0x0040, - &ep1instate, - &ep1outstate, - 2, - NULL -}; - -/** - * @brief IN EP2 state. - */ -static USBInEndpointState ep2instate; - -/** - * @brief EP2 initialization structure (IN only). - */ -static const USBEndpointConfig ep2config = { - USB_EP_MODE_TYPE_INTR, - NULL, - sduInterruptTransmitted, - NULL, - 0x0010, - 0x0000, - &ep2instate, - NULL, - 1, - NULL -}; - -/* - * Handles the USB driver global events. - */ -static void usb_event(USBDriver *usbp, usbevent_t event) { - extern SerialUSBDriver SDU1; - - switch (event) { - case USB_EVENT_RESET: - return; - case USB_EVENT_ADDRESS: - return; - case USB_EVENT_CONFIGURED: - chSysLockFromISR(); - - /* Enables the endpoints specified into the configuration. - Note, this callback is invoked from an ISR so I-Class functions - must be used.*/ - usbInitEndpointI(usbp, USBD2_DATA_REQUEST_EP, &ep1config); - usbInitEndpointI(usbp, USBD2_INTERRUPT_REQUEST_EP, &ep2config); - - /* Resetting the state of the CDC subsystem.*/ - sduConfigureHookI(&SDU1); - - chSysUnlockFromISR(); - return; - case USB_EVENT_SUSPEND: - return; - case USB_EVENT_WAKEUP: - return; - case USB_EVENT_STALLED: - return; - } - return; -} - -/* - * USB driver configuration. - */ -const USBConfig usbcfg = { - usb_event, - get_descriptor, - sduRequestsHook, - NULL -}; - -/* - * Serial over USB driver configuration. - */ -const SerialUSBConfig serusbcfg = { - &USBD2, - USBD2_DATA_REQUEST_EP, - USBD2_DATA_AVAILABLE_EP, - USBD2_INTERRUPT_REQUEST_EP -}; diff --git a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/usbcfg.h b/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/usbcfg.h deleted file mode 100644 index 2ffaa17..0000000 --- a/ChibiOS_16.1.5/community/demos/STM32/RT-STM32F429-DISCOVERY-TRIBUF/usbcfg.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _USBCFG_H_ -#define _USBCFG_H_ - -extern const USBConfig usbcfg; -extern SerialUSBConfig serusbcfg; - -#endif /* _USBCFG_H_ */ - -/** @} */ -- cgit v1.2.3