From 5a059c8d6ecfe2f98a77570b8b6cf13c500398f7 Mon Sep 17 00:00:00 2001 From: Clyne Sullivan Date: Fri, 11 Nov 2016 15:15:16 -0500 Subject: tar'd chibi --- .../community/os/hal/boards/EXP430FR5969/board.c | 46 -------- .../community/os/hal/boards/EXP430FR5969/board.h | 129 --------------------- .../community/os/hal/boards/EXP430FR5969/board.mk | 5 - 3 files changed, 180 deletions(-) delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.c delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.h delete mode 100644 ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.mk (limited to 'ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969') diff --git a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.c b/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.c deleted file mode 100644 index ac48ba0..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.c +++ /dev/null @@ -1,46 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#include "hal.h" - -/** - * @brief PAL setup. - * @details Digital I/O ports static configuration as defined in @p board.h. - * This variable is used by the HAL when initializing the PAL driver. - */ -#if HAL_USE_PAL || defined(__DOXYGEN__) -const PALConfig pal_default_config = -{ - {VAL_IOPORT1_OUT, VAL_IOPORT1_DIR, VAL_IOPORT1_REN, VAL_IOPORT1_SEL0, - VAL_IOPORT1_SEL1, VAL_IOPORT1_IES, VAL_IOPORT1_IE}, - {VAL_IOPORT2_OUT, VAL_IOPORT2_DIR, VAL_IOPORT2_REN, VAL_IOPORT2_SEL0, - VAL_IOPORT2_SEL1, VAL_IOPORT2_IES, VAL_IOPORT2_IE}, - {VAL_IOPORT0_OUT, VAL_IOPORT0_DIR, VAL_IOPORT0_REN, VAL_IOPORT0_SEL0, - VAL_IOPORT0_SEL1, VAL_IOPORT0_IES, VAL_IOPORT0_IE} -}; /* Set UART TX pin correctly */ -#endif /* HAL_USE_PAL */ - -/** - * Board-specific initialization code. - */ -void boardInit(void) { - - /* - * External interrupts setup, all disabled initially. - */ - _disable_interrupts(); - -} diff --git a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.h b/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.h deleted file mode 100644 index 97103d3..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.h +++ /dev/null @@ -1,129 +0,0 @@ -/* - ChibiOS - Copyright (C) 2016 Andrew Wygle aka awygle - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * Setup for the EXP430FR5969 LaunchPad board - */ - -/* - * Board identifier. - */ -#define BOARD_EXP430FR5959 -#define BOARD_NAME "MSP430FR5969 LaunchPad" - -/* - * IO lines assignments. - */ -#define LINE_LED_G PAL_LINE(IOPORT1, 0U) -#define LINE_LED_R PAL_LINE(IOPORT2, 14U) -#define LINE_SW_S1 PAL_LINE(IOPORT2, 13U) -#define LINE_SW_S2 PAL_LINE(IOPORT1, 1U) - -/* - * I/O ports initial setup, this configuration is established soon after reset - * in the initialization code. - * Please refer to the MSP430X Family Users Guide for details. - */ -/* - * Port A setup: - * - * P1.0 - Green LED (output low) - * P1.1 - Switch S2 (input pullup) - * P1.2 - BoosterPack BP19 (input pullup) - * P1.3 - BoosterPack BP11 (input pullup) - * P1.4 - BoosterPack BP12 (input pullup) - * P1.5 - BoosterPack BP13 (input pullup) - * P1.6 - BoosterPack BP15 (input pullup) - * P1.7 - BoosterPack BP14 (input pullup) - * P2.0 - Application UART TX (alternate 2) - * P2.1 - Application UART RX (alternate 2) - * P2.2 - BoosterPack BP7 (input pullup) - * P2.3 - N/C (input pullup) - * P2.4 - BoosterPack BP6 (input pullup) - * P2.5 - BoosterPack BP4 (input pullup) - * P2.6 - BoosterPack BP3 (input pullup) - * P2.7 - N/C (input pullup) - */ -#define VAL_IOPORT1_OUT 0xFCFE -#define VAL_IOPORT1_DIR 0x0001 -#define VAL_IOPORT1_REN 0xFCFE -#define VAL_IOPORT1_SEL0 0x0000 -#define VAL_IOPORT1_SEL1 0x0300 -#define VAL_IOPORT1_IES 0x0000 -#define VAL_IOPORT1_IE 0x0000 - -/* - * Port B setup: - * - * P3.0 - BoosterPack BP18 (input pullup) - * P3.1 - N/C (input pullup) - * P3.2 - N/C (input pullup) - * P3.3 - N/C (input pullup) - * P3.4 - BoosterPack BP8 (input pullup) - * P3.5 - BoosterPack BP9 (input pullup) - * P3.6 - BoosterPack BP10 (input pullup) - * P3.7 - N/C (input pullup) - * P4.0 - Application UART CTS (input pullup) - * P4.1 - Application UART RTS (output high) - * P4.2 - BoosterPack BP2 (input pullup) - * P4.3 - BoosterPack BP5 (input pullup) - * P4.4 - N/C (input pullup) - * P4.5 - Switch S1 (input pullup) - * P4.6 - Red LED (output low) - * P4.7 - N/C (input pullup) - */ -#define VAL_IOPORT2_OUT 0xBFFF -#define VAL_IOPORT2_DIR 0x4200 -#define VAL_IOPORT2_REN 0xBDFF -#define VAL_IOPORT2_SEL0 0x0000 -#define VAL_IOPORT2_SEL1 0x0000 -#define VAL_IOPORT2_IES 0x0000 -#define VAL_IOPORT2_IE 0x0000 - -/* - * Port J setup: - * - * PJ.0 - TDO (input pullup) - * PJ.1 - TDI (input pullup) - * PJ.2 - TMS (input pullup) - * PJ.3 - TCK (input pullup) - * PJ.4 - LFXIN (alternate 1) - * PJ.5 - LFXOUT (alternate 1) - * PJ.6 - HFXIN (N/C) (input pullup) - * PJ.7 - HFXOUT (N/C) (input pullup) - */ -#define VAL_IOPORT0_OUT 0x00FF -#define VAL_IOPORT0_DIR 0x0000 -#define VAL_IOPORT0_REN 0x00CF -#define VAL_IOPORT0_SEL0 0x0030 -#define VAL_IOPORT0_SEL1 0x0000 -#define VAL_IOPORT0_IES 0x0000 -#define VAL_IOPORT0_IE 0x0000 - -#if !defined(_FROM_ASM_) -#ifdef __cplusplus -extern "C" { -#endif - void boardInit(void); -#ifdef __cplusplus -} -#endif -#endif /* _FROM_ASM_ */ - -#endif /* _BOARD_H_ */ diff --git a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.mk b/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.mk deleted file mode 100644 index c629257..0000000 --- a/ChibiOS_16.1.5/community/os/hal/boards/EXP430FR5969/board.mk +++ /dev/null @@ -1,5 +0,0 @@ -# List of all the board related files. -BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/EXP430FR5969/board.c - -# Required include directories -BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/EXP430FR5969 -- cgit v1.2.3