From 7772ea4579a45bcf63ebd5e68be66ba1a9c72dfa Mon Sep 17 00:00:00 2001 From: Clyne Sullivan Date: Fri, 11 Nov 2016 15:02:17 -0500 Subject: chibios! --- .../testhal/KINETIS/FRDM-K20D50M/I2C/Makefile | 218 +++++++++ .../testhal/KINETIS/FRDM-K20D50M/I2C/chconf.h | 516 +++++++++++++++++++++ .../testhal/KINETIS/FRDM-K20D50M/I2C/halconf.h | 381 +++++++++++++++ .../testhal/KINETIS/FRDM-K20D50M/I2C/main.c | 73 +++ .../testhal/KINETIS/FRDM-K20D50M/I2C/mcuconf.h | 83 ++++ .../testhal/KINETIS/FRDM-K20D50M/I2C/readme.txt | 20 + .../KINETIS/FRDM-K20D50M/USB_SERIAL/Makefile | 225 +++++++++ .../KINETIS/FRDM-K20D50M/USB_SERIAL/chconf.h | 516 +++++++++++++++++++++ .../KINETIS/FRDM-K20D50M/USB_SERIAL/chtsy.inf | 106 +++++ .../KINETIS/FRDM-K20D50M/USB_SERIAL/halconf.h | 362 +++++++++++++++ .../testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/main.c | 168 +++++++ .../KINETIS/FRDM-K20D50M/USB_SERIAL/mcuconf.h | 40 ++ .../KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.c | 329 +++++++++++++ .../KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.h | 27 ++ .../testhal/KINETIS/FRDM-KL25Z/ADC/.cproject | 53 +++ .../testhal/KINETIS/FRDM-KL25Z/ADC/.project | 27 ++ .../testhal/KINETIS/FRDM-KL25Z/ADC/Makefile | 209 +++++++++ .../testhal/KINETIS/FRDM-KL25Z/ADC/chconf.h | 516 +++++++++++++++++++++ .../ADC/debug/RT-FREEDOM-KL25Z-ADC.launch | 31 ++ .../testhal/KINETIS/FRDM-KL25Z/ADC/halconf.h | 381 +++++++++++++++ .../testhal/KINETIS/FRDM-KL25Z/ADC/main.c | 132 ++++++ .../testhal/KINETIS/FRDM-KL25Z/ADC/mcuconf.h | 78 ++++ .../testhal/KINETIS/FRDM-KL25Z/ADC/readme.txt | 14 + .../testhal/KINETIS/FRDM-KL25Z/GPT/Makefile | 213 +++++++++ .../testhal/KINETIS/FRDM-KL25Z/GPT/chconf.h | 514 ++++++++++++++++++++ .../testhal/KINETIS/FRDM-KL25Z/GPT/halconf.h | 353 ++++++++++++++ .../testhal/KINETIS/FRDM-KL25Z/GPT/main.c | 75 +++ .../testhal/KINETIS/FRDM-KL25Z/GPT/mcuconf.h | 42 ++ .../testhal/KINETIS/FRDM-KL25Z/PWM/Makefile | 213 +++++++++ .../testhal/KINETIS/FRDM-KL25Z/PWM/chconf.h | 514 ++++++++++++++++++++ .../testhal/KINETIS/FRDM-KL25Z/PWM/halconf.h | 381 +++++++++++++++ .../testhal/KINETIS/FRDM-KL25Z/PWM/main.c | 128 +++++ .../testhal/KINETIS/FRDM-KL25Z/PWM/mcuconf.h | 47 ++ .../KINETIS/FRDM-KL25Z/USB_HID/Client/Makefile | 23 + .../FRDM-KL25Z/USB_HID/Client/test-usb-hid.c | 180 +++++++ .../KINETIS/FRDM-KL25Z/USB_HID/Client/udev.rules | 2 + .../testhal/KINETIS/FRDM-KL25Z/USB_HID/Makefile | 216 +++++++++ .../testhal/KINETIS/FRDM-KL25Z/USB_HID/chconf.h | 516 +++++++++++++++++++++ .../testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf.h | 368 +++++++++++++++ .../KINETIS/FRDM-KL25Z/USB_HID/halconf_community.h | 142 ++++++ .../testhal/KINETIS/FRDM-KL25Z/USB_HID/main.c | 91 ++++ .../testhal/KINETIS/FRDM-KL25Z/USB_HID/mcuconf.h | 63 +++ .../testhal/KINETIS/FRDM-KL25Z/USB_HID/usbcfg.c | 418 +++++++++++++++++ .../testhal/KINETIS/FRDM-KL25Z/USB_HID/usbcfg.h | 45 ++ .../testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/Makefile | 220 +++++++++ .../testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chconf.h | 514 ++++++++++++++++++++ .../KINETIS/FRDM-KL25Z/USB_SERIAL/chtsy.inf | 106 +++++ .../KINETIS/FRDM-KL25Z/USB_SERIAL/halconf.h | 362 +++++++++++++++ .../testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/main.c | 168 +++++++ .../KINETIS/FRDM-KL25Z/USB_SERIAL/mcuconf.h | 53 +++ .../testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.c | 329 +++++++++++++ .../testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.h | 27 ++ .../testhal/KINETIS/FRDM-KL26Z/I2C/Makefile | 212 +++++++++ .../testhal/KINETIS/FRDM-KL26Z/I2C/chconf.h | 516 +++++++++++++++++++++ .../testhal/KINETIS/FRDM-KL26Z/I2C/halconf.h | 381 +++++++++++++++ .../testhal/KINETIS/FRDM-KL26Z/I2C/main.c | 89 ++++ .../testhal/KINETIS/FRDM-KL26Z/I2C/mcuconf.h | 54 +++ .../testhal/KINETIS/FRDM-KL26Z/I2C/readme.txt | 20 + .../testhal/KINETIS/FRDM-KL26Z/PWM/Makefile | 213 +++++++++ .../testhal/KINETIS/FRDM-KL26Z/PWM/chconf.h | 514 ++++++++++++++++++++ .../testhal/KINETIS/FRDM-KL26Z/PWM/halconf.h | 381 +++++++++++++++ .../testhal/KINETIS/FRDM-KL26Z/PWM/main.c | 172 +++++++ .../testhal/KINETIS/FRDM-KL26Z/PWM/mcuconf.h | 58 +++ .../testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/Makefile | 220 +++++++++ .../testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chconf.h | 514 ++++++++++++++++++++ .../KINETIS/FRDM-KL26Z/USB_SERIAL/chtsy.inf | 106 +++++ .../KINETIS/FRDM-KL26Z/USB_SERIAL/halconf.h | 353 ++++++++++++++ .../testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/main.c | 168 +++++++ .../KINETIS/FRDM-KL26Z/USB_SERIAL/mcuconf.h | 53 +++ .../testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.c | 329 +++++++++++++ .../testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.h | 27 ++ .../community/testhal/KINETIS/KL27Z/BLINK/Makefile | 213 +++++++++ .../testhal/KINETIS/KL27Z/BLINK/board/board.c | 158 +++++++ .../testhal/KINETIS/KL27Z/BLINK/board/board.h | 53 +++ .../testhal/KINETIS/KL27Z/BLINK/board/board.mk | 5 + .../community/testhal/KINETIS/KL27Z/BLINK/chconf.h | 516 +++++++++++++++++++++ .../testhal/KINETIS/KL27Z/BLINK/flash_via_bldr.sh | 26 ++ .../testhal/KINETIS/KL27Z/BLINK/halconf.h | 187 ++++++++ .../community/testhal/KINETIS/KL27Z/BLINK/main.c | 94 ++++ .../testhal/KINETIS/KL27Z/BLINK/mcuconf.h | 79 ++++ .../testhal/KINETIS/MCHCK/BOOTLOADER/Makefile | 222 +++++++++ .../testhal/KINETIS/MCHCK/BOOTLOADER/chconf.h | 514 ++++++++++++++++++++ .../testhal/KINETIS/MCHCK/BOOTLOADER/halconf.h | 187 ++++++++ .../testhal/KINETIS/MCHCK/BOOTLOADER/main.c | 77 +++ .../testhal/KINETIS/MCHCK/BOOTLOADER/mcuconf.h | 41 ++ .../community/testhal/KINETIS/MCHCK/PWM/Makefile | 222 +++++++++ .../community/testhal/KINETIS/MCHCK/PWM/README.md | 7 + .../community/testhal/KINETIS/MCHCK/PWM/chconf.h | 514 ++++++++++++++++++++ .../community/testhal/KINETIS/MCHCK/PWM/halconf.h | 353 ++++++++++++++ .../community/testhal/KINETIS/MCHCK/PWM/main.c | 116 +++++ .../community/testhal/KINETIS/MCHCK/PWM/mcuconf.h | 41 ++ .../testhal/KINETIS/MCHCK/USB_SERIAL/Makefile | 228 +++++++++ .../testhal/KINETIS/MCHCK/USB_SERIAL/chconf.h | 513 ++++++++++++++++++++ .../testhal/KINETIS/MCHCK/USB_SERIAL/chtsy.inf | 106 +++++ .../testhal/KINETIS/MCHCK/USB_SERIAL/halconf.h | 362 +++++++++++++++ .../testhal/KINETIS/MCHCK/USB_SERIAL/main.c | 161 +++++++ .../testhal/KINETIS/MCHCK/USB_SERIAL/mcuconf.h | 49 ++ .../testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.c | 329 +++++++++++++ .../testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.h | 27 ++ .../testhal/KINETIS/TEENSY3_x/ADC/Makefile | 219 +++++++++ .../testhal/KINETIS/TEENSY3_x/ADC/chconf.h | 514 ++++++++++++++++++++ .../testhal/KINETIS/TEENSY3_x/ADC/halconf.h | 353 ++++++++++++++ .../community/testhal/KINETIS/TEENSY3_x/ADC/main.c | 135 ++++++ .../testhal/KINETIS/TEENSY3_x/ADC/mcuconf.h | 35 ++ .../testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile | 219 +++++++++ .../KINETIS/TEENSY3_x/EEPROM_EMU/Makefile.3_0 | 219 +++++++++ .../testhal/KINETIS/TEENSY3_x/EEPROM_EMU/README.md | 8 + .../testhal/KINETIS/TEENSY3_x/EEPROM_EMU/chconf.h | 516 +++++++++++++++++++++ .../testhal/KINETIS/TEENSY3_x/EEPROM_EMU/eeprom.c | 300 ++++++++++++ .../testhal/KINETIS/TEENSY3_x/EEPROM_EMU/eeprom.h | 21 + .../testhal/KINETIS/TEENSY3_x/EEPROM_EMU/halconf.h | 187 ++++++++ .../testhal/KINETIS/TEENSY3_x/EEPROM_EMU/main.c | 77 +++ .../testhal/KINETIS/TEENSY3_x/EEPROM_EMU/mcuconf.h | 51 ++ .../testhal/KINETIS/TEENSY3_x/EXT/Makefile | 219 +++++++++ .../testhal/KINETIS/TEENSY3_x/EXT/chconf.h | 514 ++++++++++++++++++++ .../testhal/KINETIS/TEENSY3_x/EXT/halconf.h | 353 ++++++++++++++ .../community/testhal/KINETIS/TEENSY3_x/EXT/main.c | 74 +++ .../testhal/KINETIS/TEENSY3_x/EXT/mcuconf.h | 47 ++ .../testhal/KINETIS/TEENSY3_x/GPT/Makefile | 219 +++++++++ .../testhal/KINETIS/TEENSY3_x/GPT/chconf.h | 514 ++++++++++++++++++++ .../testhal/KINETIS/TEENSY3_x/GPT/halconf.h | 353 ++++++++++++++ .../community/testhal/KINETIS/TEENSY3_x/GPT/main.c | 65 +++ .../testhal/KINETIS/TEENSY3_x/GPT/mcuconf.h | 35 ++ .../testhal/KINETIS/TEENSY3_x/PWM/Makefile | 219 +++++++++ .../testhal/KINETIS/TEENSY3_x/PWM/chconf.h | 516 +++++++++++++++++++++ .../testhal/KINETIS/TEENSY3_x/PWM/halconf.h | 353 ++++++++++++++ .../community/testhal/KINETIS/TEENSY3_x/PWM/main.c | 116 +++++ .../testhal/KINETIS/TEENSY3_x/PWM/mcuconf.h | 35 ++ .../testhal/KINETIS/TEENSY3_x/SERIAL/Makefile | 219 +++++++++ .../testhal/KINETIS/TEENSY3_x/SERIAL/Makefile.3_0 | 219 +++++++++ .../testhal/KINETIS/TEENSY3_x/SERIAL/chconf.h | 514 ++++++++++++++++++++ .../testhal/KINETIS/TEENSY3_x/SERIAL/halconf.h | 353 ++++++++++++++ .../testhal/KINETIS/TEENSY3_x/SERIAL/main.c | 81 ++++ .../testhal/KINETIS/TEENSY3_x/SERIAL/mcuconf.h | 35 ++ .../testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile | 225 +++++++++ .../KINETIS/TEENSY3_x/USB_SERIAL/Makefile.3_0 | 225 +++++++++ .../testhal/KINETIS/TEENSY3_x/USB_SERIAL/chconf.h | 513 ++++++++++++++++++++ .../testhal/KINETIS/TEENSY3_x/USB_SERIAL/chtsy.inf | 106 +++++ .../testhal/KINETIS/TEENSY3_x/USB_SERIAL/halconf.h | 353 ++++++++++++++ .../testhal/KINETIS/TEENSY3_x/USB_SERIAL/main.c | 161 +++++++ .../testhal/KINETIS/TEENSY3_x/USB_SERIAL/mcuconf.h | 40 ++ .../testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.c | 329 +++++++++++++ .../testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.h | 27 ++ .../testhal/KINETIS/TEENSY_LC/BOOTLOADER/Makefile | 213 +++++++++ .../testhal/KINETIS/TEENSY_LC/BOOTLOADER/chconf.h | 514 ++++++++++++++++++++ .../testhal/KINETIS/TEENSY_LC/BOOTLOADER/halconf.h | 187 ++++++++ .../testhal/KINETIS/TEENSY_LC/BOOTLOADER/main.c | 103 ++++ .../testhal/KINETIS/TEENSY_LC/BOOTLOADER/mcuconf.h | 53 +++ .../KINETIS/TEENSY_LC/EEPROM_EMU/MKL26Z64.ld | 105 +++++ .../testhal/KINETIS/TEENSY_LC/EEPROM_EMU/Makefile | 214 +++++++++ .../testhal/KINETIS/TEENSY_LC/EEPROM_EMU/README.md | 7 + .../testhal/KINETIS/TEENSY_LC/EEPROM_EMU/chconf.h | 514 ++++++++++++++++++++ .../testhal/KINETIS/TEENSY_LC/EEPROM_EMU/eeprom.c | 241 ++++++++++ .../testhal/KINETIS/TEENSY_LC/EEPROM_EMU/eeprom.h | 21 + .../testhal/KINETIS/TEENSY_LC/EEPROM_EMU/halconf.h | 187 ++++++++ .../testhal/KINETIS/TEENSY_LC/EEPROM_EMU/main.c | 78 ++++ .../testhal/KINETIS/TEENSY_LC/EEPROM_EMU/mcuconf.h | 53 +++ .../testhal/KINETIS/TEENSY_LC/PWM/Makefile | 213 +++++++++ .../testhal/KINETIS/TEENSY_LC/PWM/chconf.h | 514 ++++++++++++++++++++ .../testhal/KINETIS/TEENSY_LC/PWM/halconf.h | 187 ++++++++ .../community/testhal/KINETIS/TEENSY_LC/PWM/main.c | 120 +++++ .../testhal/KINETIS/TEENSY_LC/PWM/mcuconf.h | 58 +++ 162 files changed, 34076 insertions(+) create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/readme.txt create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/chtsy.inf create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/.cproject create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/.project create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/debug/RT-FREEDOM-KL25Z-ADC.launch create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/readme.txt create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/test-usb-hid.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/udev.rules create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf_community.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/usbcfg.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/usbcfg.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chtsy.inf create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/readme.txt create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chtsy.inf create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.mk create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/flash_via_bldr.sh create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/README.md create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/chtsy.inf create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile.3_0 create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/README.md create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/eeprom.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/eeprom.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/Makefile.3_0 create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile.3_0 create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/chtsy.inf create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/MKL26Z64.ld create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/README.md create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/eeprom.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/eeprom.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/mcuconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/Makefile create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/chconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/halconf.h create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/main.c create mode 100644 ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/mcuconf.h (limited to 'ChibiOS_16.1.5/community/testhal/KINETIS') diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/Makefile new file mode 100644 index 0000000..a4de448 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/Makefile @@ -0,0 +1,218 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -DCRT0_INIT_STACKS=0 +# USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MK20DX128.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/chconf.h new file mode 100644 index 0000000..eecc0a6 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/chconf.h @@ -0,0 +1,516 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/halconf.h new file mode 100644 index 0000000..6430fb2 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/halconf.h @@ -0,0 +1,381 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/main.c new file mode 100644 index 0000000..8c0df50 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/main.c @@ -0,0 +1,73 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +#define MMA8451_ADDR 0x1D +#define WHO_AM_I 0x0D + +static bool i2cOk = false; + +static THD_WORKING_AREA(waThread1, 64); +static THD_FUNCTION(Thread1, arg) { + + (void)arg; + chRegSetThreadName("Blinker"); + while (TRUE) { + if (i2cOk) { + palSetPad(IOPORT3, 3); + palTogglePad(IOPORT4, 4); + } else { + palSetPad(IOPORT4, 4); + palTogglePad(IOPORT3, 3); + } + chThdSleepMilliseconds(500); + } +} + +/* + * Application entry point. + */ +int main(void) { + + uint8_t tx[1], rx[1]; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + palSetPad(IOPORT3, 3); + palSetPad(IOPORT4, 4); + palSetPad(IOPORT1, 2); + + i2cStart(&I2CD1, NULL); + + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + while (1) { + tx[0] = WHO_AM_I; + i2cMasterTransmitTimeout(&I2CD1, MMA8451_ADDR, tx, 1, rx, 1, TIME_INFINITE); + i2cOk = (rx[0] == 0x1A) ? true : false; + chThdSleepMilliseconds(2000); + } +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/mcuconf.h new file mode 100644 index 0000000..0b7c312 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/mcuconf.h @@ -0,0 +1,83 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define K20x_MCUCONF + +/* + * HAL driver system settings. + */ + +/* Select the MCU clocking mode below by enabling the appropriate block. */ + +/* Enable clock initialization by HAL */ +#define KINETIS_NO_INIT FALSE + +/* PEE mode - external (8 MHz) crystal with PLL for 48 MHz core/system clock. */ +#if 1 +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL +#endif + +/* FEI mode - 48 MHz with internal 32.768 kHz oscillator */ +#if 0 +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide MCGCLKOUT (~48MHz) by 1 to SYSCLK */ +#define KINETIS_CLKDIV1_OUTDIV2 1 /* Divide by 1 for (~48MHz) peripheral clock */ +#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide by 2 for (~24MHz) flash clock */ +#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY +#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2 +#endif /* 0 */ + +/* FEE mode - 24 MHz with external 32.768 kHz crystal */ +/* not implemented */ +#if 0 +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 0 /* 732x FLL factor */ +#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 24 MHz */ +#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 12 MHz */ +#define KINETIS_SYSCLK_FREQUENCY 23986176UL /* 32.768 kHz*732 (~24 MHz) */ +#define KINETIS_UART0_CLOCK_FREQ (32768 * 732) /* FLL output */ +#define KINETIS_UART0_CLOCK_SRC 1 /* Select FLL clock */ +#define KINETIS_BUSCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY / KINETIS_CLKDIV1_OUTDIV4) +#endif /* 0 */ + +/* FEE mode - 48 MHz */ +/* not implemented */ +#if 0 +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 48 MHz */ +#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 24 MHz */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#endif /* 0 */ + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 FALSE +#define KINETIS_I2C_USE_I2C0 TRUE +#define KINETIS_I2C_I2C0_PRIORITY 8 + +#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/readme.txt b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/readme.txt new file mode 100644 index 0000000..0a9a5fc --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/I2C/readme.txt @@ -0,0 +1,20 @@ +********************************************************************* +** ChibiOS/RT I2C test demo for Freedom Board K20D50M. ** +********************************************************************* + +** TARGET ** + +The test runs on an Freescale Freedom K20D50M board. + +** The Demo ** + +This test tries to access the onboard MMA8451 chip using the I2C bus. +It sends the command WHO_AM_I which has a standard answer that can be +verified. If the correct answer is received the GREEN led will blink. +If no answer or invalid answer is received the RED led will blink. + +** Build Procedure ** + +This test was built using the ARM GCC toolchain available at: + +https://launchpad.net/gcc-arm-embedded diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/Makefile new file mode 100644 index 0000000..a5f4c68 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/Makefile @@ -0,0 +1,225 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). +include $(CHIBIOS)/test/rt/test.mk +include $(CHIBIOS)/os/hal/lib/streams/streams.mk +include $(CHIBIOS)/os/various/shell/shell.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MK20DX128.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + $(STREAMSSRC) \ + $(SHELLSRC) \ + usbcfg.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(STREAMSINC) $(SHELLINC) $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/chconf.h new file mode 100644 index 0000000..bd97716 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/chconf.h @@ -0,0 +1,516 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/chtsy.inf b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/chtsy.inf new file mode 100644 index 0000000..519b300 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/chtsy.inf @@ -0,0 +1,106 @@ +;************************************************************ +; Windows USB CDC ACM Setup File +; Copyright (c) 2000 Microsoft Corporation + + +[Version] +Signature="$Windows NT$" +Class=Ports +ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} +Provider=%MFGNAME% +LayoutFile=layout.inf +CatalogFile=%MFGFILENAME%.cat +DriverVer=11/15/2007,5.1.2600.0 + +[Manufacturer] +%MFGNAME%=DeviceList, NTamd64 + +[DestinationDirs] +DefaultDestDir=12 + + +;------------------------------------------------------------------------------ +; Windows 2000/XP/Vista-32bit Sections +;------------------------------------------------------------------------------ + +[DriverInstall.nt] +include=mdmcpq.inf +CopyFiles=DriverCopyFiles.nt +AddReg=DriverInstall.nt.AddReg + +[DriverCopyFiles.nt] +usbser.sys,,,0x20 + +[DriverInstall.nt.AddReg] +HKR,,DevLoader,,*ntkern +HKR,,NTMPDriver,,%DRIVERFILENAME%.sys +HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" + +[DriverInstall.nt.Services] +AddService=usbser, 0x00000002, DriverService.nt + +[DriverService.nt] +DisplayName=%SERVICE% +ServiceType=1 +StartType=3 +ErrorControl=1 +ServiceBinary=%12%\%DRIVERFILENAME%.sys + +;------------------------------------------------------------------------------ +; Vista-64bit Sections +;------------------------------------------------------------------------------ + +[DriverInstall.NTamd64] +include=mdmcpq.inf +CopyFiles=DriverCopyFiles.NTamd64 +AddReg=DriverInstall.NTamd64.AddReg + +[DriverCopyFiles.NTamd64] +%DRIVERFILENAME%.sys,,,0x20 + +[DriverInstall.NTamd64.AddReg] +HKR,,DevLoader,,*ntkern +HKR,,NTMPDriver,,%DRIVERFILENAME%.sys +HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" + +[DriverInstall.NTamd64.Services] +AddService=usbser, 0x00000002, DriverService.NTamd64 + +[DriverService.NTamd64] +DisplayName=%SERVICE% +ServiceType=1 +StartType=3 +ErrorControl=1 +ServiceBinary=%12%\%DRIVERFILENAME%.sys + + +;------------------------------------------------------------------------------ +; Vendor and Product ID Definitions +;------------------------------------------------------------------------------ +; When developing your USB device, the VID and PID used in the PC side +; application program and the firmware on the microcontroller must match. +; Modify the below line to use your VID and PID. Use the format as shown below. +; Note: One INF file can be used for multiple devices with different VID and PIDs. +; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. +;------------------------------------------------------------------------------ +[SourceDisksFiles] +[SourceDisksNames] +[DeviceList] +%DESCRIPTION%=DriverInstall, USB\VID_0179&PID_0001 + +[DeviceList.NTamd64] +%DESCRIPTION%=DriverInstall, USB\VID_0179&PID_0001 + + +;------------------------------------------------------------------------------ +; String Definitions +;------------------------------------------------------------------------------ +;Modify these strings to customize your device +;------------------------------------------------------------------------------ +[Strings] +MFGFILENAME="ChTsy" +DRIVERFILENAME ="usbser" +MFGNAME="NopeLab" +INSTDISK="ChTsy CDC driver" +DESCRIPTION="ChTsy CDC driver" +SERVICE="USB RS-232 Emulation Driver" \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/halconf.h new file mode 100644 index 0000000..45e72ef --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/halconf.h @@ -0,0 +1,362 @@ +/* + ChibiOS - (C) 2015-2016 Jonathan Struebel + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB TRUE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the Watchdog subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/* + * @brief Enable debugging messages over SD1. + * + * @note Requires HAL_USE_SERIAL. + */ +#if HAL_USE_SERIAL +#define DEBUG_USB +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/main.c new file mode 100644 index 0000000..a6c90bf --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/main.c @@ -0,0 +1,168 @@ +/* + (C) 2015-2016 Jonathan Struebel + Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include +#include + +#include "ch.h" +#include "hal.h" + +#include "shell.h" +#include "chprintf.h" + +#include "usbcfg.h" + +/*===========================================================================*/ +/* Command line related. */ +/*===========================================================================*/ + +#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) + +/* Can be measured using dd if=/dev/xxxx of=/dev/null bs=512 count=10000.*/ +static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { + static uint8_t buf[] = + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: write\r\n"); + return; + } + + while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { +#if 1 + /* Writing in channel mode.*/ + chnWrite(&SDU1, buf, sizeof buf - 1); +#else + /* Writing in buffer mode.*/ + (void) obqGetEmptyBufferTimeout(&SDU1.obqueue, TIME_INFINITE); + memcpy(SDU1.obqueue.ptr, buf, SERIAL_USB_BUFFERS_SIZE); + obqPostFullBuffer(&SDU1.obqueue, SERIAL_USB_BUFFERS_SIZE); +#endif + } + chprintf(chp, "\r\n\nstopped\r\n"); +} + +static const ShellCommand commands[] = { + {"write", cmd_write}, + {NULL, NULL} +}; + +static const ShellConfig shell_cfg1 = { + (BaseSequentialStream *)&SDU1, + commands +}; + +/*===========================================================================*/ +/* Generic code. */ +/*===========================================================================*/ + +/* + * Red LED blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 128); +static THD_FUNCTION(Thread1, arg) { + systime_t time; + + (void)arg; + + chRegSetThreadName("blinker"); + while (true) { + time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; + palClearPad(GPIO_LED_RED, PIN_LED_RED); + chThdSleepMilliseconds(time); + palSetPad(GPIO_LED_RED, PIN_LED_RED); + chThdSleepMilliseconds(time); + } +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Turn off the RGB LED. + */ + palSetPad(GPIO_LED_RED, PIN_LED_RED); /* red */ + palSetPad(GPIO_LED_GREEN, PIN_LED_GREEN); /* green */ + palSetPad(GPIO_LED_BLUE, PIN_LED_BLUE); /* blue */ + + /* + * Initializes a serial-over-USB CDC driver. + */ + sduObjectInit(&SDU1); + sduStart(&SDU1, &serusbcfg); + + /* + * Activates the USB driver and then the USB bus pull-up on D+. + * Note, a delay is inserted in order to not have to disconnect the cable + * after a reset. + */ + usbDisconnectBus(serusbcfg.usbp); + chThdSleepMilliseconds(1500); + usbStart(serusbcfg.usbp, &usbcfg); + usbConnectBus(serusbcfg.usbp); + + /* + * Shell manager initialization. + */ + shellInit(); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Normal main() thread activity, spawning shells. + */ + while (true) { + if (SDU1.config->usbp->state == USB_ACTIVE) { + thread_t *shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE, + "shell", NORMALPRIO + 1, + shellThread, (void *)&shell_cfg1); + chThdWait(shelltp); /* Waiting termination. */ + } + chThdSleepMilliseconds(1000); + } +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/mcuconf.h new file mode 100644 index 0000000..b6b6622 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/mcuconf.h @@ -0,0 +1,40 @@ +/* + ChibiOS - (C) 2015-2016 Jonathan Struebel + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define K20x_MCUCONF + +/* + * HAL driver system settings. + */ +/* PEE mode - 48MHz system clock driven by external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +/* + * USB driver settings + */ +#define KINETIS_USB_USE_USB0 TRUE + +#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.c new file mode 100644 index 0000000..24a732f --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.c @@ -0,0 +1,329 @@ +/* + (C) 2015-2016 Jonathan Struebel + Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "hal.h" + +/* Virtual serial port over USB.*/ +SerialUSBDriver SDU1; + +/* + * Endpoints to be used for USBD1. + */ +#define USBD1_DATA_REQUEST_EP 1 +#define USBD1_DATA_AVAILABLE_EP 1 +#define USBD1_INTERRUPT_REQUEST_EP 2 + +/* + * USB Device Descriptor. + */ +static const uint8_t vcom_device_descriptor_data[18] = { + USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ + 0x02, /* bDeviceClass (CDC). */ + 0x00, /* bDeviceSubClass. */ + 0x00, /* bDeviceProtocol. */ + 0x40, /* bMaxPacketSize. */ + 0x0179, /* idVendor. */ + 0x0001, /* idProduct. */ + 0x0200, /* bcdDevice. */ + 1, /* iManufacturer. */ + 2, /* iProduct. */ + 3, /* iSerialNumber. */ + 1) /* bNumConfigurations. */ +}; + +/* + * Device Descriptor wrapper. + */ +static const USBDescriptor vcom_device_descriptor = { + sizeof vcom_device_descriptor_data, + vcom_device_descriptor_data +}; + +/* Configuration Descriptor tree for a CDC.*/ +static const uint8_t vcom_configuration_descriptor_data[67] = { + /* Configuration Descriptor.*/ + USB_DESC_CONFIGURATION(67, /* wTotalLength. */ + 0x02, /* bNumInterfaces. */ + 0x01, /* bConfigurationValue. */ + 0, /* iConfiguration. */ + 0xC0, /* bmAttributes (self powered). */ + 50), /* bMaxPower (100mA). */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x01, /* bNumEndpoints. */ + 0x02, /* bInterfaceClass (Communications + Interface Class, CDC section + 4.2). */ + 0x02, /* bInterfaceSubClass (Abstract + Control Model, CDC section 4.3). */ + 0x01, /* bInterfaceProtocol (AT commands, + CDC section 4.4). */ + 0), /* iInterface. */ + /* Header Functional Descriptor (CDC section 5.2.3).*/ + USB_DESC_BYTE (5), /* bLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header + Functional Descriptor. */ + USB_DESC_BCD (0x0110), /* bcdCDC. */ + /* Call Management Functional Descriptor. */ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ + USB_DESC_BYTE (0x01), /* bDataInterface. */ + /* ACM Functional Descriptor.*/ + USB_DESC_BYTE (4), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract + Control Management Descriptor). */ + USB_DESC_BYTE (0x02), /* bmCapabilities. */ + /* Union Functional Descriptor.*/ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bMasterInterface (Communication + Class Interface). */ + USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class + Interface). */ + /* Endpoint 2 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, + 0x03, /* bmAttributes (Interrupt). */ + 0x0008, /* wMaxPacketSize. */ + 0xFF), /* bInterval. */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x02, /* bNumEndpoints. */ + 0x0A, /* bInterfaceClass (Data Class + Interface, CDC section 4.5). */ + 0x00, /* bInterfaceSubClass (CDC section + 4.6). */ + 0x00, /* bInterfaceProtocol (CDC section + 4.7). */ + 0x00), /* iInterface. */ + /* Endpoint 1 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00), /* bInterval. */ + /* Endpoint 1 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00) /* bInterval. */ +}; + +/* + * Configuration Descriptor wrapper. + */ +static const USBDescriptor vcom_configuration_descriptor = { + sizeof vcom_configuration_descriptor_data, + vcom_configuration_descriptor_data +}; + +/* + * U.S. English language identifier. + */ +static const uint8_t vcom_string0[] = { + USB_DESC_BYTE(4), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ +}; + +/* + * Vendor string. + */ +static const uint8_t vcom_string1[] = { + USB_DESC_BYTE(2+2*7), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'N', 0, 'o', 0, 'p', 0, 'e', 0, 'L', 0, 'a', 0, 'b', 0, +}; + +/* + * Device Description string. + */ +static const uint8_t vcom_string2[] = { + USB_DESC_BYTE(2+5*2), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'C', 0, 'h', 0, 'T', 0, 's', 0, 'y', 0, +}; + +/* + * Serial Number string. + */ +static const uint8_t vcom_string3[] = { + USB_DESC_BYTE(8), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + '0' + CH_KERNEL_MAJOR, 0, + '0' + CH_KERNEL_MINOR, 0, + '0' + CH_KERNEL_PATCH, 0 +}; + +/* + * Strings wrappers array. + */ +static const USBDescriptor vcom_strings[] = { + {sizeof vcom_string0, vcom_string0}, + {sizeof vcom_string1, vcom_string1}, + {sizeof vcom_string2, vcom_string2}, + {sizeof vcom_string3, vcom_string3} +}; + +/* + * Handles the GET_DESCRIPTOR callback. All required descriptors must be + * handled here. + */ +static const USBDescriptor *get_descriptor(USBDriver *usbp, + uint8_t dtype, + uint8_t dindex, + uint16_t lang) { + (void)usbp; + (void)lang; + switch (dtype) { + case USB_DESCRIPTOR_DEVICE: + return &vcom_device_descriptor; + case USB_DESCRIPTOR_CONFIGURATION: + return &vcom_configuration_descriptor; + case USB_DESCRIPTOR_STRING: + if (dindex < 4) + return &vcom_strings[dindex]; + } + return NULL; +} + +/** + * @brief IN EP1 state. + */ +static USBInEndpointState ep1instate; + +/** + * @brief OUT EP1 state. + */ +static USBOutEndpointState ep1outstate; + +/** + * @brief EP1 initialization structure (both IN and OUT). + */ +static const USBEndpointConfig ep1config = { + USB_EP_MODE_TYPE_BULK, + NULL, + sduDataTransmitted, + sduDataReceived, + 0x0040, + 0x0040, + &ep1instate, + &ep1outstate, + 2, + NULL +}; + +/** + * @brief IN EP2 state. + */ +static USBInEndpointState ep2instate; + +/** + * @brief EP2 initialization structure (IN only). + */ +static const USBEndpointConfig ep2config = { + USB_EP_MODE_TYPE_INTR, + NULL, + sduInterruptTransmitted, + NULL, + 0x0010, + 0x0000, + &ep2instate, + NULL, + 1, + NULL +}; + +/* + * Handles the USB driver global events. + */ +static void usb_event(USBDriver *usbp, usbevent_t event) { + extern SerialUSBDriver SDU1; + + switch (event) { + case USB_EVENT_RESET: + return; + case USB_EVENT_ADDRESS: + return; + case USB_EVENT_CONFIGURED: + chSysLockFromISR(); + + /* Enables the endpoints specified into the configuration. + Note, this callback is invoked from an ISR so I-Class functions + must be used.*/ + usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); + usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); + + /* Resetting the state of the CDC subsystem.*/ + sduConfigureHookI(&SDU1); + + chSysUnlockFromISR(); + return; + case USB_EVENT_SUSPEND: + chSysLockFromISR(); + + /* Disconnection event on suspend.*/ + sduDisconnectI(&SDU1); + + chSysUnlockFromISR(); + return; + case USB_EVENT_WAKEUP: + return; + case USB_EVENT_STALLED: + return; + } + return; +} + +/* + * Handles the USB driver global events. + */ +static void sof_handler(USBDriver *usbp) { + + (void)usbp; + + osalSysLockFromISR(); + sduSOFHookI(&SDU1); + osalSysUnlockFromISR(); +} + +/* + * USB driver configuration. + */ +const USBConfig usbcfg = { + usb_event, + get_descriptor, + sduRequestsHook, + sof_handler +}; + +/* + * Serial over USB driver configuration. + */ +const SerialUSBConfig serusbcfg = { + &USBD1, + USBD1_DATA_REQUEST_EP, + USBD1_DATA_AVAILABLE_EP, + USBD1_INTERRUPT_REQUEST_EP +}; diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.h new file mode 100644 index 0000000..254d7ba --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-K20D50M/USB_SERIAL/usbcfg.h @@ -0,0 +1,27 @@ +/* + (C) 2015-2016 Jonathan Struebel + Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _USBCFG_H_ +#define _USBCFG_H_ + +extern const USBConfig usbcfg; +extern SerialUSBConfig serusbcfg; +extern SerialUSBDriver SDU1; + +#endif /* _USBCFG_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/.cproject b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/.cproject new file mode 100644 index 0000000..4e28c4a --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/.cproject @@ -0,0 +1,53 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/.project b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/.project new file mode 100644 index 0000000..0bd79df --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/.project @@ -0,0 +1,27 @@ + + + RT-FREEDOM-KL25Z-ADC + + + + + + org.eclipse.cdt.managedbuilder.core.genmakebuilder + clean,full,incremental, + + + + + org.eclipse.cdt.managedbuilder.core.ScannerConfigBuilder + full,incremental, + + + + + + org.eclipse.cdt.core.cnature + org.eclipse.cdt.core.ccnature + org.eclipse.cdt.managedbuilder.core.managedBuildNature + org.eclipse.cdt.managedbuilder.core.ScannerConfigNature + + diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/Makefile new file mode 100644 index 0000000..d5120b9 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/Makefile @@ -0,0 +1,209 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = -std=gnu99 +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib + +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0plus + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/chconf.h new file mode 100644 index 0000000..eecc0a6 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/chconf.h @@ -0,0 +1,516 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/debug/RT-FREEDOM-KL25Z-ADC.launch b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/debug/RT-FREEDOM-KL25Z-ADC.launch new file mode 100644 index 0000000..67d3e82 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/debug/RT-FREEDOM-KL25Z-ADC.launch @@ -0,0 +1,31 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/halconf.h new file mode 100644 index 0000000..f8b4e8c --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/halconf.h @@ -0,0 +1,381 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/main.c new file mode 100644 index 0000000..f01051b --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/main.c @@ -0,0 +1,132 @@ +/* + ChibiOS - Copyright (C) 2014 Derek Mulcahy + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +#define ADC_GRP1_NUM_CHANNELS 2 +#define ADC_GRP1_BUF_DEPTH 1 + +static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; + +static void adc_end_cb(ADCDriver *adcp, adcsample_t *buffer, size_t n) { + + (void)adcp; + (void)n; + + /* + * The bandgap value represents the ADC reading for 1.0V + */ + uint16_t sensor = buffer[0]; + uint16_t bandgap = buffer[1]; + + /* + * The v25 value is the voltage reading at 25C, it comes from the ADC + * electricals table in the processor manual. V25 is in millivolts. + */ + int32_t v25 = 716; + + /* + * The m value is slope of the temperature sensor values, again from + * the ADC electricals table in the processor manual. + * M in microvolts per degree. + */ + int32_t m = 1620; + + /* + * Divide the temperature sensor reading by the bandgap to get + * the voltage for the ambient temperature in millivolts. + */ + int32_t vamb = (sensor * 1000) / bandgap; + + /* + * This formula comes from the reference manual. + * Temperature is in millidegrees C. + */ + int32_t delta = (((vamb - v25) * 1000000) / m); + int32_t temp = 25000 - delta; + + if (temp < 19000) { + /* Turn just the Blue LED on if less than 19C */ + palSetPad(GPIOB,18); // Red + palSetPad(GPIOB,19); // Green + palClearPad(GPIOD,1); // Blue + } else if (temp > 28000) { + /* Turn just the Red LED on if greater than 28C */ + palClearPad(GPIOB,18); // Red + palSetPad(GPIOB,19); // Green + palSetPad(GPIOD,1); // Blue + } else { + /* Turn just the Green LED on if between 19C and 28C */ + palSetPad(GPIOB,18); // Red + palClearPad(GPIOB,19); // Green + palSetPad(GPIOD,1); // Blue + } +} + +/* + * ADC conversion group. + * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. + */ +static const ADCConversionGroup adcgrpcfg1 = { + false, + ADC_GRP1_NUM_CHANNELS, + adc_end_cb, + NULL, + ADC_TEMP_SENSOR | ADC_BANDGAP, + /* CFG1 Regiser - ADCCLK = SYSCLK / 16, 16 bits per sample */ + ADCx_CFG1_ADIV(ADCx_CFG1_ADIV_DIV_8) | + ADCx_CFG1_ADICLK(ADCx_CFG1_ADIVCLK_BUS_CLOCK_DIV_2) | + ADCx_CFG1_MODE(ADCx_CFG1_MODE_16_BITS), + /* SC3 Register - Average 32 readings per sample */ + ADCx_SC3_AVGE | + ADCx_SC3_AVGS(ADCx_SC3_AVGS_AVERAGE_32_SAMPLES) +}; + +static const ADCConfig adccfg1 = { + /* Perform initial calibration */ + true +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the ADC1 driver. + */ + adcStart(&ADCD1, &adccfg1); + + while (1) { + /* + * ADC linear conversion. + */ + adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); + + chThdSleepMilliseconds(500); + } +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/mcuconf.h new file mode 100644 index 0000000..b657ccf --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/mcuconf.h @@ -0,0 +1,78 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define KL2x_MCUCONF + +/* + * HAL driver system settings. + */ + +/* Select the MCU clocking mode below by enabling the appropriate block. */ +/* The defaults are MCG_MODE_PEE, SYSCLK 48MHz, PLLCLK 96MHz, BUSCLK 24MHz */ + +/* PEE mode - 48MHz system clock driven by external crystal. */ +#if 1 +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL +#endif + +/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ +#if 0 +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ +#endif /* 0 */ + +/* FEE mode - 24 MHz with external 32.768 kHz crystal */ +#if 0 +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 0 /* 732x FLL factor */ +#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 24 MHz */ +#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 12 MHz */ +#define KINETIS_SYSCLK_FREQUENCY 23986176UL /* 32.768 kHz*732 (~24 MHz) */ +#define KINETIS_UART0_CLOCK_FREQ (32768 * 732) /* FLL output */ +#define KINETIS_UART0_CLOCK_SRC 1 /* Select FLL clock */ +#define KINETIS_BUSCLK_FREQUENCY (KINETIS_SYSCLK_FREQUENCY / KINETIS_CLKDIV1_OUTDIV4) +#endif /* 0 */ + +/* FEE mode - 48 MHz */ +#if 0 +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEE +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_CLKDIV1_OUTDIV1 1 /* Divide 48 MHz FLL by 1 => 48 MHz */ +#define KINETIS_CLKDIV1_OUTDIV4 2 /* Divide OUTDIV1 output by 2 => 24 MHz */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#endif /* 0 */ + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 FALSE + +/* + * ADC driver system settings. + */ +#define KINETIS_ADC_USE_ADC0 TRUE + +#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/readme.txt b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/readme.txt new file mode 100644 index 0000000..4077343 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/ADC/readme.txt @@ -0,0 +1,14 @@ +***************************************************************************** +** ChibiOS/RT port for ARM-Cortex-M0+ Freedom Board KL25Z. ** +***************************************************************************** + +The demo runs on an Freescale Freedom KL25Z board and demonstrates +the usage of the ADC. + +It reads the internal temperature sensor. If the temperature drops +below 20C (68F) it turns on the blue LED. If the temperature rises +above 27C (81F) it turns on the red LED. Otherwise the green LED is +illuminated. + +The internal bandgap voltage reference is used to calibrate the +results returned from the temperature sensor. diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/Makefile new file mode 100644 index 0000000..8ea9026 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/Makefile @@ -0,0 +1,213 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk +# Other files (optional). +include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0plus + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/chconf.h new file mode 100644 index 0000000..b7ffc80 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/chconf.h @@ -0,0 +1,514 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file FRDM-KL25Z/GPT/chconf.h + * @brief Configuration file. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/halconf.h new file mode 100644 index 0000000..bd57f0a --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/halconf.h @@ -0,0 +1,353 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file FRDM-KL25Z/GPT/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT TRUE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/main.c new file mode 100644 index 0000000..926730d --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/main.c @@ -0,0 +1,75 @@ +/* + ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde + (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +#define POLLED_TEST FALSE + +void gptcb(GPTDriver *gptp) { + (void)gptp; + palTogglePad(GPIO_LED_GREEN, PIN_LED_GREEN); +} + +/* + * GPT configuration structure. + */ +static const GPTConfig gpt1cfg = { + 4, + gptcb +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Turn off the RGB LED. + */ + palSetPad(GPIO_LED_RED, PIN_LED_RED); /* red */ + palSetPad(GPIO_LED_GREEN, PIN_LED_GREEN); /* green */ + palSetPad(GPIO_LED_BLUE, PIN_LED_BLUE); /* blue */ + + /* + * Initializes the GPT driver 1. + */ + gptStart(&GPTD1, &gpt1cfg); + +#if !POLLED_TEST + gptStartContinuous(&GPTD1, 2); +#endif + + while (1) { +#if POLLED_TEST + gpt_lld_polled_delay(&GPTD1, 1) ; + palTogglePad(GPIO_LED_GREEN, PIN_LED_GREEN); +#else + chThdSleepMilliseconds(500); +#endif + } +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/mcuconf.h new file mode 100644 index 0000000..6a2d2d7 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/GPT/mcuconf.h @@ -0,0 +1,42 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define K20x_MCUCONF + +/* + * HAL driver system settings. + */ +/* PEE mode - 48MHz system clock driven by (8 MHz) external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + + +/* + * GPT driver system settings. + */ +#define KINETIS_GPT_USE_PIT0 TRUE +#define KINETIS_GPT_PIT0_IRQ_PRIORITY 2 + +#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/Makefile new file mode 100644 index 0000000..8ea9026 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/Makefile @@ -0,0 +1,213 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk +# Other files (optional). +include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0plus + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/chconf.h new file mode 100644 index 0000000..25dd7b8 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/chconf.h @@ -0,0 +1,514 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file FRDM-KL25Z/PWM/chconf.h + * @brief Configuration file. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/halconf.h new file mode 100644 index 0000000..89d31a5 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/halconf.h @@ -0,0 +1,381 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file FRDM-KL25Z/PWM/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/main.c new file mode 100644 index 0000000..32d8020 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/main.c @@ -0,0 +1,128 @@ +/* + * (c) 2015 flabbergast + * Based on ChibiOS 3.0.1 demo code, license below. + * Licensed under the Apache License, Version 2.0. + */ + +/* + * ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "ch.h" +#include "hal.h" + +/* + * on FRDM-KL25Z: + * red LED on PTB18/TPM2_CH0 (AF3) + * green LED on PTB19/TPM2_CH1 (AF3) + */ + +#define PWM_DRIVER PWMD3 + +/* PWM config structure */ +/* Note: the PWM clock frequency must be so that + * SYSCLK / FREQ is a power of 2 between 1 and 128. + */ +static const PWMConfig pwmcfg = { + 750000, /* 750kHz PWM clock frequency. */ + 1000, /* PWM period is 1000 cycles. */ + /* meaning PWM resolution is 750 */ + NULL, /* no callback */ + { + {PWM_OUTPUT_ACTIVE_LOW, NULL}, /* ch0: mode, no callback */ + {PWM_OUTPUT_ACTIVE_LOW, NULL}, /* ch1: mode, no callback */ + {PWM_OUTPUT_DISABLED, NULL}, /* ch2: mode, no callback */ + {PWM_OUTPUT_DISABLED, NULL}, /* ch3: mode, no callback */ + {PWM_OUTPUT_DISABLED, NULL}, /* ch4: mode, no callback */ + {PWM_OUTPUT_DISABLED, NULL} /* ch5: mode, no callback */ + }, +}; + +#define BREATHE_STEP 16 /* ms; = 4000ms/TABLE_SIZE */ + +/* Breathing Sleep LED brighness(PWM On period) table + * + * http://www.wolframalpha.com/input/?i=%28sin%28+x%2F64*pi%29**8+*+255%2C+x%3D0+to+63 + * (0..63).each {|x| p ((sin(x/64.0*PI)**8)*255).to_i } + */ +/* ruby -e "a = ((0..255).map{|x| Math.exp(Math.cos(Math::PI+(2*x*(Math::PI)/255)))-Math.exp(-1) }); m = a.max; a.map\!{|x| (10000*x/m).to_i}; p a" */ +#define TABLE_SIZE 256 +static const uint16_t breathing_table[TABLE_SIZE] = { + 0, 0, 1, 4, 7, 11, 17, 23, 30, 38, 47, 58, 69, 81, 94, 109, 124, 141, 159, 177, 197, 218, 241, 264, 289, 315, 343, 372, 402, 433, 466, 501, 537, 574, 613, 654, 696, 741, 786, 834, 883, 935, 988, 1043, 1100, 1159, 1220, 1283, 1349, 1416, 1486, 1558, 1632, 1709, 1788, 1870, 1954, 2040, 2129, 2220, 2314, 2411, 2510, 2611, 2715, 2822, 2932, 3044, 3158, 3275, 3395, 3517, 3641, 3768, 3897, 4028, 4162, 4298, 4436, 4576, 4717, 4861, 5006, 5152, 5300, 5449, 5600, 5751, 5903, 6055, 6208, 6361, 6513, 6666, 6818, 6970, 7120, 7269, 7417, 7563, 7708, 7850, 7990, 8127, 8261, 8391, 8519, 8643, 8762, 8878, 8989, 9095, 9196, 9293, 9383, 9469, 9548, 9622, 9689, 9750, 9805, 9853, 9895, 9930, 9957, 9978, 9992, 9999, 10000, 9992, 9978, 9957, 9930, 9895, 9853, 9805, 9750, 9689, 9622, 9548, 9469, 9383, 9293, 9196, 9095, 8989, 8878, 8762, 8643, 8519, 8391, 8261, 8127, 7990, 7850, 7708, 7563, 7417, 7269, 7120, 6970, 6818, 6666, 6513, 6361, 6208, 6055, 5903, 5751, 5600, 5449, 5300, 5152, 5006, 4861, 4717, 4576, 4436, 4298, 4162, 4028, 3897, 3768, 3641, 3517, 3395, 3275, 3158, 3044, 2932, 2822, 2715, 2611, 2510, 2411, 2314, 2220, 2129, 2040, 1954, 1870, 1788, 1709, 1632, 1558, 1486, 1416, 1349, 1283, 1220, 1159, 1100, 1043, 988, 935, 883, 834, 786, 741, 696, 654, 613, 574, 537, 501, 466, 433, 402, 372, 343, 315, 289, 264, 241, 218, 197, 177, 159, 141, 124, 109, 94, 81, 69, 58, 47, 38, 30, 23, 17, 11, 7, 4, 1, 0, 0 +}; + +uint16_t table_pos = 0; +uint8_t active_led = 0; + +static THD_WORKING_AREA(waBreatheThread, 128); +static THD_FUNCTION(BreatheThread, arg) { + (void)arg; + chRegSetThreadName("breatheThread"); + + while(true) { + pwmEnableChannel(&PWM_DRIVER, active_led, PWM_PERCENTAGE_TO_WIDTH(&PWM_DRIVER,breathing_table[table_pos])); + table_pos++; + if(table_pos == TABLE_SIZE) { + table_pos = 0; + active_led = (active_led+1) % 2; + } + chThdSleepMilliseconds(BREATHE_STEP); + } +} + +/* + * Application entry point. + */ +int main(void) { + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Turn off the RGB LED. + */ + palSetLine(LINE_LED_RED); /* red */ + palSetLine(LINE_LED_GREEN); /* green */ + palSetLine(LINE_LED_BLUE); /* blue */ + + /* + * Start the PWM driver, route TPM2 output to PTB18, PTB19. + * Enable channels now to avoid a blink later. + */ + pwmStart(&PWM_DRIVER, &pwmcfg); + palSetLineMode(LINE_LED_RED, PAL_MODE_ALTERNATIVE_3); + palSetLineMode(LINE_LED_GREEN, PAL_MODE_ALTERNATIVE_3); + pwmEnableChannel(&PWM_DRIVER, 0, 0); + pwmEnableChannel(&PWM_DRIVER, 1, 0); + + /* + * Create the breathe thread. + */ + chThdCreateStatic(waBreatheThread, sizeof(waBreatheThread), NORMALPRIO, BreatheThread, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing except + * sleeping in a loop. + */ + while(true) { + chThdSleepMilliseconds(500); + } +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/mcuconf.h new file mode 100644 index 0000000..ff704e6 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/PWM/mcuconf.h @@ -0,0 +1,47 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define KL2x_MCUCONF + +/* + * HAL driver system settings. + */ +/* PEE mode - 48MHz system clock driven by (8 MHz) external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +/* + * USB driver settings + */ +#define KINETIS_USB_USE_USB0 TRUE +/* need to redefine this, since the default is for K20x */ +#define KINETIS_USB_USB0_IRQ_PRIORITY 2 + +/* + * PWM driver settings. + */ +#define KINETIS_PWM_USE_TPM2 TRUE + +#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/Makefile new file mode 100644 index 0000000..ed84ee9 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/Makefile @@ -0,0 +1,23 @@ +CC=gcc +CFLAGS = -Wall -Wextra -O2 -g + +SRCS = $(wildcard *.c) +OBJS = $(SRCS:%.c=%.o) +EXE = test-usb-hid + +all: $(EXE) + +$(EXE): $(OBJS) + +-include $(subst .c,.d,$(SRCS)) + +%.d: %.c + $(CC) $(CFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -MM -MF $@ -MP -MT $(subst .c,.o,$<) $< + +clean: + rm -f $(EXE) + rm -f $(OBJS) + rm -f $(subst .c,.d,$(SRCS)) + rm -f *~ + +.PHONY: clean all diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/test-usb-hid.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/test-usb-hid.c new file mode 100644 index 0000000..241b129 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/test-usb-hid.c @@ -0,0 +1,180 @@ +/* + + Copyright (c) 2014 Guillaume Duc + + Permission is hereby granted, free of charge, to any person obtaining a copy + of this software and associated documentation files (the "Software"), to deal + in the Software without restriction, including without limitation the rights + to use, copy, modify, merge, publish, distribute, sublicense, and/or sell + copies of the Software, and to permit persons to whom the Software is + furnished to do so, subject to the following conditions: + + The above copyright notice and this permission notice shall be included in all + copies or substantial portions of the Software. + + THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + SOFTWARE. + +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define USB_HID_IN_REPORT_SIZE 1 +#define USB_HID_OUT_REPORT_SIZE 1 + +struct usb_hid_in_report_s +{ + uint8_t sequence_number; +}; + +struct usb_hid_out_report_s +{ + uint8_t sequence_number; +}; + +static uint8_t usb_hid_in_report_buf[USB_HID_IN_REPORT_SIZE]; +// +1 for the report index +static uint8_t usb_hid_out_report_buf[USB_HID_OUT_REPORT_SIZE + 1]; + +static struct usb_hid_in_report_s *usb_hid_in_report = + (struct usb_hid_in_report_s *) usb_hid_in_report_buf; + +static struct usb_hid_out_report_s *usb_hid_out_report = + (struct usb_hid_out_report_s *) (&usb_hid_out_report_buf[1]); + +static int usb_hid_fd; +static uint8_t wkup_pb_old_value = 0; + +static void +read_in_report () +{ + int res, i; + + printf ("read()\n"); + res = read (usb_hid_fd, usb_hid_in_report_buf, USB_HID_IN_REPORT_SIZE); + if (res < 0) + { + perror ("read"); + exit (EXIT_FAILURE); + } + else + { + printf ("read() read %d bytes:\t", res); + for (i = 0; i < res; i++) + printf ("%02hhx ", usb_hid_in_report_buf[i]); + printf ("\n"); + } +} + +static void +send_out_report () +{ + int res; + + usb_hid_out_report_buf[0] = 0; + + res = + write (usb_hid_fd, usb_hid_out_report_buf, USB_HID_OUT_REPORT_SIZE + 1); + if (res < 0) + { + perror ("write"); + exit (EXIT_FAILURE); + } + + usb_hid_out_report->sequence_number++; +} + +static void +usb_hid_init (const char *dev_name) +{ + int i, res; + int desc_size = 0; + char buf[256]; + + struct hidraw_report_descriptor rpt_desc; + struct hidraw_devinfo info; + + usb_hid_fd = open (dev_name, O_RDWR); + + if (usb_hid_fd < 0) + { + perror ("Unable to open device"); + exit (EXIT_FAILURE); + } + + memset (&rpt_desc, 0x0, sizeof (rpt_desc)); + memset (&info, 0x0, sizeof (info)); + memset (buf, 0x0, sizeof (buf)); + + // Get Report Descriptor Size + res = ioctl (usb_hid_fd, HIDIOCGRDESCSIZE, &desc_size); + if (res < 0) + perror ("HIDIOCGRDESCSIZE"); + else + printf ("Report Descriptor Size: %d\n", desc_size); + + // Get Report Descriptor + rpt_desc.size = desc_size; + res = ioctl (usb_hid_fd, HIDIOCGRDESC, &rpt_desc); + if (res < 0) + { + perror ("HIDIOCGRDESC"); + } + else + { + printf ("Report Descriptor:\n"); + for (i = 0; i < rpt_desc.size; i++) + printf ("%02hhx ", rpt_desc.value[i]); + puts ("\n"); + } +} + +int +main (int argc, char **argv) +{ + if (argc < 2) + { + fprintf (stderr, "Usage: %s /dev/hidrawX\n", argv[0]); + return EXIT_FAILURE; + } + + memset (usb_hid_out_report_buf, 0, sizeof (usb_hid_out_report_buf)); + + usb_hid_init (argv[1]); + usb_hid_out_report->sequence_number = 4; + send_out_report (); + + while (1) + { + read_in_report (); + + if (usb_hid_in_report->sequence_number == 40) + { + usb_hid_out_report->sequence_number = usb_hid_in_report->sequence_number / 2; + send_out_report (); + } + + } + + close (usb_hid_fd); + + return EXIT_SUCCESS; +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/udev.rules b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/udev.rules new file mode 100644 index 0000000..8c93f15 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Client/udev.rules @@ -0,0 +1,2 @@ +SUBSYSTEM=="usb", ATTR{idVendor}=="0179", ATTR{idProduct}=="0002", MODE:="0666" +KERNEL=="hidraw*", SUBSYSTEM=="hidraw", ATTRS{idVendor}=="0179", ATTRS{idProduct}=="0002", MODE:="0666" diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Makefile new file mode 100644 index 0000000..39c7ccd --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/Makefile @@ -0,0 +1,216 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 --specs=nosys.specs -lnosys +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk +# HAL-OSAL files (optional). +include $(CHIBIOS_CONTRIB)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk +# Other files (optional). +#include $(CHIBIOS)/test/rt/test.mk +#include $(CHIBIOS)/os/hal/lib/streams/streams.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + usbcfg.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) + + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/chconf.h new file mode 100644 index 0000000..6774a44 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/chconf.h @@ -0,0 +1,516 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked jus * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** +t before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf.h new file mode 100644 index 0000000..a3466b4 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf.h @@ -0,0 +1,368 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file boards/FRDM-KL25Z/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 64 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 8 +#endif +/** @} */ + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +/*===========================================================================*/ +/* Community drivers's includes */ +/*===========================================================================*/ + +#include "halconf_community.h" + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf_community.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf_community.h new file mode 100644 index 0000000..b2f75af --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/halconf_community.h @@ -0,0 +1,142 @@ +/* + ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef HALCONF_COMMUNITY_H +#define HALCONF_COMMUNITY_H + +/** + * @brief Enables the community overlay. + */ +#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__) +#define HAL_USE_COMMUNITY TRUE +#endif + +/** + * @brief Enables the FSMC subsystem. + */ +#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__) +#define HAL_USE_FSMC FALSE +#endif + +/** + * @brief Enables the NAND subsystem. + */ +#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__) +#define HAL_USE_NAND FALSE +#endif + +/** + * @brief Enables the 1-wire subsystem. + */ +#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__) +#define HAL_USE_ONEWIRE FALSE +#endif + +/** + * @brief Enables the EICU subsystem. + */ +#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__) +#define HAL_USE_EICU FALSE +#endif + +/** + * @brief Enables the CRC subsystem. + */ +#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__) +#define HAL_USE_CRC FALSE +#endif + +/** + * @brief Enables the RNG subsystem. + */ +#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__) +#define HAL_USE_RNG FALSE +#endif + +/** + * @brief Enables the EEPROM subsystem. + */ +#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__) +#define HAL_USE_EEPROM FALSE +#endif + +/** + * @brief Enables the TIMCAP subsystem. + */ +#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__) +#define HAL_USE_TIMCAP FALSE +#endif + +/** + * @brief Enables the USBH subsystem. + */ +#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__) +#define HAL_USE_USBH FALSE +#endif + +/** + * @brief Enables the USB HID subsystem. + */ +#if !defined(HAL_USE_USB_HID) || defined(__DOXYGEN__) +#define HAL_USE_USB_HID TRUE +#endif + +/*===========================================================================*/ +/* FSMCNAND driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define NAND_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* 1-wire driver related settings. */ +/*===========================================================================*/ +/** + * @brief Enables strong pull up feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_STRONG_PULLUP FALSE + +/** + * @brief Enables search ROM feature. + * @note Disabling this option saves both code and data space. + */ +#define ONEWIRE_USE_SEARCH_ROM TRUE + + /*===========================================================================*/ +/* EEProm driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables 24xx series I2C eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE24XX TRUE + /** + * @brief Enables 25xx series SPI eeprom device driver. + * @note Disabling this option saves both code and data space. + */ +#define EEPROM_USE_EE25XX TRUE + + +#endif /* HALCONF_COMMUNITY_H */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/main.c new file mode 100644 index 0000000..80aeb5d --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/main.c @@ -0,0 +1,91 @@ +/* + Copyright (C) 2016 Jonathan Struebel + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ +#include "hal.h" + +#include "usbcfg.h" + +/* + * Blue LED blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waBlinkThread, 128); +static THD_FUNCTION(BlinkThread, arg) { + + (void)arg; + + chRegSetThreadName("blinker"); + while (true) { + systime_t time = USBD1.state == USB_ACTIVE ? 250 : 500; + palTogglePad(GPIO_LED_BLUE, PIN_LED_BLUE); + chThdSleepMilliseconds(time); + } +} + +/* + * Application entry point. + */ +int main(void) { + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Turn off the RGB LED. + */ + palSetPad(GPIO_LED_RED, PIN_LED_RED); /* red */ + palSetPad(GPIO_LED_GREEN, PIN_LED_GREEN); /* green */ + palSetPad(GPIO_LED_BLUE, PIN_LED_BLUE); /* blue */ + + /* + * Initializes a USB HID driver. + */ + hidObjectInit(&UHD1); + hidStart(&UHD1, &usbhidcfg); + + /* + * Activates the USB driver and then the USB bus pull-up on D+. + * Note, a delay is inserted in order to not have to disconnect the cable + * after a reset. + */ + + usbDisconnectBus(usbhidcfg.usbp); + chThdSleepMilliseconds(1000); + usbStart(usbhidcfg.usbp, &usbcfg); + usbConnectBus(usbhidcfg.usbp); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waBlinkThread, sizeof(waBlinkThread), NORMALPRIO, BlinkThread, NULL); + + while (true) { + if (usbhidcfg.usbp->state == USB_ACTIVE) { + uint8_t report; + size_t n = hidGetReport(0, &report, sizeof(report)); + hidWriteReport(&UHD1, &report, n); + n = hidReadReportt(&UHD1, &report, sizeof(report), TIME_IMMEDIATE); + if (n > 0) + hidSetReport(0, &report, n); + } + palTogglePad(GPIO_LED_RED, PIN_LED_RED); + chThdSleepMilliseconds(1000); + } +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/mcuconf.h new file mode 100644 index 0000000..57629ef --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/mcuconf.h @@ -0,0 +1,63 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +#define KL2x_MCUCONF + +/* + * HAL driver system settings. + */ +#if 0 +/* PEE mode - 48MHz system clock driven by (8 MHz) external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL +#endif + +#if 1 +/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ +#endif + +/* + * I2C driver system settings. + */ +#define KINETIS_I2C_USE_I2C1 TRUE + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +/* + * USB driver settings + */ +#define KINETIS_USB_USE_USB0 TRUE +/* need to redefine this, since the default is for K20x */ +#define KINETIS_USB_USB0_IRQ_PRIORITY 2 + +/* + * Endianess of MCU + */ +#define ARCH_LITTLE_ENDIAN + +#endif /* MCUCONF_H */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/usbcfg.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/usbcfg.c new file mode 100644 index 0000000..30944b5 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/usbcfg.c @@ -0,0 +1,418 @@ +/* + Copyright (C) 2016 Jonathan Struebel + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file usbcfg.c + * @brief USB driver config. + * + * @addtogroup USB + * @{ + */ +#include "hal.h" +#include "usbcfg.h" + +/* + * Endpoints to be used for USBD1. + */ +#define USBD1_DATA_REQUEST_EP 1 +#define USBD1_DATA_AVAILABLE_EP 1 + +/* + * USB HID Driver structure. + */ +USBHIDDriver UHD1; + +/* + * Data used for feedback + */ +uint8_t increment_var = 0; + +/* + * USB Device Descriptor. + */ +static const uint8_t hid_device_descriptor_data[18] = { + USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ + 0x00, /* bDeviceClass. */ + 0x00, /* bDeviceSubClass. */ + 0x00, /* bDeviceProtocol. */ + 0x40, /* bMaxPacketSize. */ + 0x0179, /* idVendor. */ + 0x0002, /* idProduct. */ + 0x0200, /* bcdDevice. */ + 1, /* iManufacturer. */ + 2, /* iProduct. */ + 3, /* iSerialNumber. */ + 1) /* bNumConfigurations. */ +}; + +/* + * Device Descriptor wrapper. + */ +static const USBDescriptor hid_device_descriptor = { + sizeof hid_device_descriptor_data, + hid_device_descriptor_data +}; + +/* + * Configuration Descriptor tree for a HID device + * + * The HID Specifications version 1.11 require the following order: + * - Configuration Descriptor + * - Interface Descriptor + * - HID Descriptor + * - Endpoints Descriptors + */ +#define HID_DESCRIPTOR_OFFSET 18 +#define HID_DESCRIPTOR_SIZE USB_DESC_HID_SIZE + +static const uint8_t hid_configuration_descriptor_data[41] = { + /* Configuration Descriptor.*/ + USB_DESC_CONFIGURATION(41, /* wTotalLength. */ + 0x01, /* bNumInterfaces. */ + 0x01, /* bConfigurationValue. */ + 0, /* iConfiguration. */ + 0xC0, /* bmAttributes (self powered). */ + 50), /* bMaxPower (100mA). */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x02, /* bNumEndpoints. */ + 0x03, /* bInterfaceClass (HID Interface + Class). */ + 0x00, /* bInterfaceSubClass (None). */ + 0x00, /* bInterfaceProtocol (None). */ + 0), /* iInterface. */ + /* HID Descriptor.*/ + USB_DESC_HID (0x0110, /* bcdHID. */ + 0x00, /* bCountryCode. */ + 0x01, /* bNumDescriptors. */ + 0x22, /* bDescriptorType (Report + Descriptor). */ + 34), /* wDescriptorLength. */ + /* Endpoint 1 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ + 0x03, /* bmAttributes (Interrupt). */ + 0x0040, /* wMaxPacketSize. */ + 0x0A), /* bInterval (10ms). */ + /* Endpoint 1 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ + 0x03, /* bmAttributes (Interrupt). */ + 0x0040, /* wMaxPacketSize. */ + 0x0A) /* bInterval (10ms). */ +}; + +/* + * Configuration Descriptor wrapper. + */ +static const USBDescriptor hid_configuration_descriptor = { + sizeof hid_configuration_descriptor_data, + hid_configuration_descriptor_data +}; + +/* + * HID Descriptor wrapper. + */ +static const USBDescriptor hid_descriptor = { + HID_DESCRIPTOR_SIZE, + &hid_configuration_descriptor_data[HID_DESCRIPTOR_OFFSET] +}; + +/* + * HID Report Descriptor + * + * This is the description of the format and the content of the + * different IN or/and OUT reports that your application can + * receive/send + * + * See "Device Class Definition for Human Interface Devices (HID)" + * (http://www.usb.org/developers/hidpage/HID1_11.pdf) for the + * detailed description of all the fields + */ +static const uint8_t hid_report_descriptor_data[] = { + USB_DESC_BYTE (0x06), /* Usage Page - */ + USB_DESC_WORD (0xFF00), /* Vendor Defined. */ + USB_DESC_BYTE (0x09), /* Usage - */ + USB_DESC_BYTE (0x01), /* Vendor Defined. */ + USB_DESC_BYTE (0xA1), /* Collection - */ + USB_DESC_BYTE (0x01), /* Application. */ + + USB_DESC_BYTE (0x09), /* Usage - */ + USB_DESC_BYTE (0x01), /* Vendor Defined. */ + USB_DESC_BYTE (0x15), /* Logical Minimum - */ + USB_DESC_BYTE (0x00), /* 0. */ + USB_DESC_BYTE (0x26), /* Logical Maximum - */ + USB_DESC_WORD (0x00FF), /* 255. */ + USB_DESC_BYTE (0x75), /* Report size - */ + USB_DESC_BYTE (0x08), /* 8 bits. */ + USB_DESC_BYTE (0x95), /* Report count - */ + USB_DESC_BYTE (0x01), /* 1. */ + USB_DESC_BYTE (0x81), /* Input - */ + USB_DESC_BYTE (0x02), /* Data, Variable, Absolute. */ + + USB_DESC_BYTE (0x09), /* Usage - */ + USB_DESC_BYTE (0x01), /* Vendor Defined. */ + USB_DESC_BYTE (0x15), /* Logical Minimum - */ + USB_DESC_BYTE (0x00), /* 0. */ + USB_DESC_BYTE (0x26), /* Logical Maximum - */ + USB_DESC_WORD (0x00FF), /* 255. */ + USB_DESC_BYTE (0x75), /* Report Size - */ + USB_DESC_BYTE (0x08), /* 8 bits. */ + USB_DESC_BYTE (0x95), /* Report Count - */ + USB_DESC_BYTE (0x01), /* 1. */ + USB_DESC_BYTE (0x91), /* Output - */ + USB_DESC_BYTE (0x02), /* Data, Variable, Absolute. */ + + USB_DESC_BYTE (0xC0) /* End Collection. */ +}; + +/* + * HID Report Descriptor wrapper + */ +static const USBDescriptor hid_report_descriptor = { + sizeof hid_report_descriptor_data, + hid_report_descriptor_data +}; + +/* + * U.S. English language identifier. + */ +static const uint8_t hid_string0[] = { + USB_DESC_BYTE(2+2*1), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ +}; + +/* + * Vendor string. + */ +static const uint8_t hid_string1[] = { + USB_DESC_BYTE(2+2*7), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'N', 0, 'o', 0, 'p', 0, 'e', 0, 'L', 0, 'a', 0, 'b', 0, +}; + +/* + * Device Description string. + */ +static const uint8_t hid_string2[] = { + USB_DESC_BYTE(2+5*2), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'C', 0, 'h', 0, 'T', 0, 's', 0, 'y', 0, +}; + +/* + * Serial Number string. + */ +static const uint8_t hid_string3[] = { + USB_DESC_BYTE(2+2*3), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + '0' + CH_KERNEL_MAJOR, 0, + '0' + CH_KERNEL_MINOR, 0, + '0' + CH_KERNEL_PATCH, 0 +}; + +/* + * Strings wrappers array. + */ +static const USBDescriptor hid_strings[] = { + {sizeof hid_string0, hid_string0}, + {sizeof hid_string1, hid_string1}, + {sizeof hid_string2, hid_string2}, + {sizeof hid_string3, hid_string3} +}; + +/* + * Handles the GET_DESCRIPTOR callback. All required descriptors must be + * handled here. + */ +static const USBDescriptor *get_descriptor(USBDriver *usbp, + uint8_t dtype, + uint8_t dindex, + uint16_t lang) { + (void)usbp; + (void)lang; + switch (dtype) { + case USB_DESCRIPTOR_DEVICE: + return &hid_device_descriptor; + case USB_DESCRIPTOR_CONFIGURATION: + return &hid_configuration_descriptor; + case USB_DESCRIPTOR_STRING: + if (dindex < 4) + return &hid_strings[dindex]; + case USB_DESCRIPTOR_INTERFACE: + break; + case USB_DESCRIPTOR_ENDPOINT: + break; + case USB_DESCRIPTOR_HID: + return &hid_descriptor; + case HID_REPORT: + return &hid_report_descriptor; + default: + break; + } + return NULL; +} + +/** + * @brief IN EP1 state. + */ +static USBInEndpointState ep1instate; + +/** + * @brief OUT EP1 state. + */ +static USBOutEndpointState ep1outstate; + +/** + * @brief EP1 initialization structure (both IN and OUT). + */ +static const USBEndpointConfig ep1config = { + USB_EP_MODE_TYPE_INTR, + NULL, + hidDataTransmitted, + hidDataReceived, + 0x0040, + 0x0040, + &ep1instate, + &ep1outstate, + 2, + NULL +}; + +/* + * Handles the USB driver global events. + */ +static void usb_event(USBDriver *usbp, usbevent_t event) { +// (void)usbp; + switch (event) { + case USB_EVENT_RESET: + return; + case USB_EVENT_ADDRESS: + return; + case USB_EVENT_CONFIGURED: + osalSysLockFromISR(); + + /* Enables the endpoints specified into the configuration. + Note, this callback is invoked from an ISR so I-Class functions + must be used.*/ + usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); + + /* Resetting the state of the CDC subsystem.*/ + hidConfigureHookI(&UHD1); + + osalSysUnlockFromISR(); + return; + case USB_EVENT_SUSPEND: + return; + case USB_EVENT_WAKEUP: + return; + case USB_EVENT_STALLED: + return; + } + return; +} + +static bool req_handler(USBDriver *usbp) { + size_t n; + + if ((usbp->setup[0] & USB_RTYPE_TYPE_MASK) == USB_RTYPE_TYPE_CLASS) { + switch (usbp->setup[1]) { + case HID_GET_REPORT: + n = hidGetReport(0, &increment_var, sizeof(increment_var)); + usbSetupTransfer(usbp, &increment_var, n, NULL); + return true; + default: + return hidRequestsHook(usbp); + } + } + return hidRequestsHook(usbp); +} + +#if 0 +/* + * Handles the USB driver global events. + */ +static void sof_handler(USBDriver *usbp) { + + (void)usbp; + + osalSysLockFromISR(); + sduSOFHookI(&SDU1); + osalSysUnlockFromISR(); +} +#endif + +/** + * @brief Generate HID Report + * @details This function generates the data for an HID report so + * that it can be transferred to the host. + * + * @param[in] id report ID + * @param[out] bp data buffer pointer + * @param[in] n the maximum number of bytes for data buffer + * @return number of bytes of report in data buffer + */ +size_t hidGetReport(uint8_t id, uint8_t *bp, size_t n) { + + (void) id; + (void) n; + + increment_var++; + *bp = increment_var; + return sizeof(increment_var); +} + +/** + * @brief Set HID Report + * @details This function sets the data for an HID report + * that was transferred from the host. + * + * @param[in] id report ID + * @param[in] bp data buffer pointer + * @param[in] n the number of bytes in data buffer + * @return The operation status. + * @retval MSG_OK if the report was set. + */ +msg_t hidSetReport(uint8_t id, uint8_t *bp, size_t n) { + + (void) id; + (void) n; + + increment_var = *bp; + return MSG_OK; +} + +/* + * USB driver configuration. + */ +const USBConfig usbcfg = { + usb_event, + get_descriptor, + req_handler, + NULL + /*sof_handler*/ +}; + +/* + * USB HID driver configuration. + */ +const USBHIDConfig usbhidcfg = { + &USBD1, + USBD1_DATA_REQUEST_EP, + USBD1_DATA_AVAILABLE_EP +}; + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/usbcfg.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/usbcfg.h new file mode 100644 index 0000000..3d69417 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_HID/usbcfg.h @@ -0,0 +1,45 @@ +/* + Copyright (C) 2016 Jonathan Struebel + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file usbcfg.h + * @brief USB driver config header. + * + * @addtogroup USB + * @{ + */ + +#ifndef USBCFG_H +#define USBCFG_H + +#include "hal_usb_hid.h" + +extern const USBConfig usbcfg; +extern const USBHIDConfig usbhidcfg; +extern USBHIDDriver UHD1; + +#ifdef __cplusplus +extern "C" { +#endif + size_t hidGetReport(uint8_t id, uint8_t *bp, size_t n); + msg_t hidSetReport(uint8_t id, uint8_t *bp, size_t n); +#ifdef __cplusplus +} +#endif + +#endif /* USBCFG_H */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/Makefile new file mode 100644 index 0000000..57ab9e8 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/Makefile @@ -0,0 +1,220 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL25Z/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk +# Other files (optional). +include $(CHIBIOS)/test/rt/test.mk +include $(CHIBIOS)/os/hal/lib/streams/streams.mk +include $(CHIBIOS)/os/various/shell/shell.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + $(STREAMSSRC) \ + $(SHELLSRC) \ + usbcfg.c \ + main.c \ + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(STREAMSINC) $(SHELLINC) + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0plus + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chconf.h new file mode 100644 index 0000000..7b54de5 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chconf.h @@ -0,0 +1,514 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file FRDM-KL25Z/USB_SERIAL/chconf.h + * @brief Configuration file. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chtsy.inf b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chtsy.inf new file mode 100644 index 0000000..4ae7d0b --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/chtsy.inf @@ -0,0 +1,106 @@ +;************************************************************ +; Windows USB CDC ACM Setup File +; Copyright (c) 2000 Microsoft Corporation + + +[Version] +Signature="$Windows NT$" +Class=Ports +ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} +Provider=%MFGNAME% +LayoutFile=layout.inf +CatalogFile=%MFGFILENAME%.cat +DriverVer=11/15/2007,5.1.2600.0 + +[Manufacturer] +%MFGNAME%=DeviceList, NTamd64 + +[DestinationDirs] +DefaultDestDir=12 + + +;------------------------------------------------------------------------------ +; Windows 2000/XP/Vista-32bit Sections +;------------------------------------------------------------------------------ + +[DriverInstall.nt] +include=mdmcpq.inf +CopyFiles=DriverCopyFiles.nt +AddReg=DriverInstall.nt.AddReg + +[DriverCopyFiles.nt] +usbser.sys,,,0x20 + +[DriverInstall.nt.AddReg] +HKR,,DevLoader,,*ntkern +HKR,,NTMPDriver,,%DRIVERFILENAME%.sys +HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" + +[DriverInstall.nt.Services] +AddService=usbser, 0x00000002, DriverService.nt + +[DriverService.nt] +DisplayName=%SERVICE% +ServiceType=1 +StartType=3 +ErrorControl=1 +ServiceBinary=%12%\%DRIVERFILENAME%.sys + +;------------------------------------------------------------------------------ +; Vista-64bit Sections +;------------------------------------------------------------------------------ + +[DriverInstall.NTamd64] +include=mdmcpq.inf +CopyFiles=DriverCopyFiles.NTamd64 +AddReg=DriverInstall.NTamd64.AddReg + +[DriverCopyFiles.NTamd64] +%DRIVERFILENAME%.sys,,,0x20 + +[DriverInstall.NTamd64.AddReg] +HKR,,DevLoader,,*ntkern +HKR,,NTMPDriver,,%DRIVERFILENAME%.sys +HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" + +[DriverInstall.NTamd64.Services] +AddService=usbser, 0x00000002, DriverService.NTamd64 + +[DriverService.NTamd64] +DisplayName=%SERVICE% +ServiceType=1 +StartType=3 +ErrorControl=1 +ServiceBinary=%12%\%DRIVERFILENAME%.sys + + +;------------------------------------------------------------------------------ +; Vendor and Product ID Definitions +;------------------------------------------------------------------------------ +; When developing your USB device, the VID and PID used in the PC side +; application program and the firmware on the microcontroller must match. +; Modify the below line to use your VID and PID. Use the format as shown below. +; Note: One INF file can be used for multiple devices with different VID and PIDs. +; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. +;------------------------------------------------------------------------------ +[SourceDisksFiles] +[SourceDisksNames] +[DeviceList] +%DESCRIPTION%=DriverInstall, USB\VID_0179&PID_0001 + +[DeviceList.NTamd64] +%DESCRIPTION%=DriverInstall, USB\VID_0179&PID_0001 + + +;------------------------------------------------------------------------------ +; String Definitions +;------------------------------------------------------------------------------ +;Modify these strings to customize your device +;------------------------------------------------------------------------------ +[Strings] +MFGFILENAME="ChTsy" +DRIVERFILENAME ="usbser" +MFGNAME="NopeLab" +INSTDISK="ChTsy CDC driver" +DESCRIPTION="ChTsy CDC driver" +SERVICE="USB RS-232 Emulation Driver" \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/halconf.h new file mode 100644 index 0000000..6bb60f7 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/halconf.h @@ -0,0 +1,362 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file FRDM-KL25Z/USB_SERIAL/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB TRUE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/* + * @brief Enable debugging messages over SD1. + * + * @note Requires HAL_USE_SERIAL. + */ +#if HAL_USE_SERIAL +#define DEBUG_USB +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/main.c new file mode 100644 index 0000000..77c6063 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/main.c @@ -0,0 +1,168 @@ +/* + (C) 2015-2016 flabbergast + Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include +#include + +#include "ch.h" +#include "hal.h" + +#include "shell.h" +#include "chprintf.h" + +#include "usbcfg.h" + +/*===========================================================================*/ +/* Command line related. */ +/*===========================================================================*/ + +#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) + +/* Can be measured using dd if=/dev/xxxx of=/dev/null bs=512 count=10000.*/ +static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { + static uint8_t buf[] = + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: write\r\n"); + return; + } + + while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { +#if 1 + /* Writing in channel mode.*/ + chnWrite(&SDU1, buf, sizeof buf - 1); +#else + /* Writing in buffer mode.*/ + (void) obqGetEmptyBufferTimeout(&SDU1.obqueue, TIME_INFINITE); + memcpy(SDU1.obqueue.ptr, buf, SERIAL_USB_BUFFERS_SIZE); + obqPostFullBuffer(&SDU1.obqueue, SERIAL_USB_BUFFERS_SIZE); +#endif + } + chprintf(chp, "\r\n\nstopped\r\n"); +} + +static const ShellCommand commands[] = { + {"write", cmd_write}, + {NULL, NULL} +}; + +static const ShellConfig shell_cfg1 = { + (BaseSequentialStream *)&SDU1, + commands +}; + +/*===========================================================================*/ +/* Generic code. */ +/*===========================================================================*/ + +/* + * Red LED blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 128); +static THD_FUNCTION(Thread1, arg) { + systime_t time; + + (void)arg; + + chRegSetThreadName("blinker"); + while (true) { + time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; + palClearPad(GPIO_LED_RED, PIN_LED_RED); + chThdSleepMilliseconds(time); + palSetPad(GPIO_LED_RED, PIN_LED_RED); + chThdSleepMilliseconds(time); + } +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Turn off the RGB LED. + */ + palSetPad(GPIO_LED_RED, PIN_LED_RED); /* red */ + palSetPad(GPIO_LED_GREEN, PIN_LED_GREEN); /* green */ + palSetPad(GPIO_LED_BLUE, PIN_LED_BLUE); /* blue */ + + /* + * Initializes a serial-over-USB CDC driver. + */ + sduObjectInit(&SDU1); + sduStart(&SDU1, &serusbcfg); + + /* + * Activates the USB driver and then the USB bus pull-up on D+. + * Note, a delay is inserted in order to not have to disconnect the cable + * after a reset. + */ + usbDisconnectBus(serusbcfg.usbp); + chThdSleepMilliseconds(1500); + usbStart(serusbcfg.usbp, &usbcfg); + usbConnectBus(serusbcfg.usbp); + + /* + * Shell manager initialization. + */ + shellInit(); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Normal main() thread activity, spawning shells. + */ + while (true) { + if (SDU1.config->usbp->state == USB_ACTIVE) { + thread_t *shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE, + "shell", NORMALPRIO + 1, + shellThread, (void *)&shell_cfg1); + chThdWait(shelltp); /* Waiting termination. */ + } + chThdSleepMilliseconds(1000); + } +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/mcuconf.h new file mode 100644 index 0000000..42c9361 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/mcuconf.h @@ -0,0 +1,53 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define KL2x_MCUCONF + +/* + * HAL driver system settings. + */ +#if 0 +/* PEE mode - 48MHz system clock driven by (8 MHz) external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL +#endif + +#if 1 +/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ +#endif + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +/* + * USB driver settings + */ +#define KINETIS_USB_USE_USB0 TRUE +/* need to redefine this, since the default is for K20x */ +#define KINETIS_USB_USB0_IRQ_PRIORITY 2 + +#endif /* _MCUCONF_H_ */ \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.c new file mode 100644 index 0000000..3093640 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.c @@ -0,0 +1,329 @@ +/* + (C) 2015-2016 flabbergast + Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "hal.h" + +/* Virtual serial port over USB.*/ +SerialUSBDriver SDU1; + +/* + * Endpoints to be used for USBD1. + */ +#define USBD1_DATA_REQUEST_EP 1 +#define USBD1_DATA_AVAILABLE_EP 1 +#define USBD1_INTERRUPT_REQUEST_EP 2 + +/* + * USB Device Descriptor. + */ +static const uint8_t vcom_device_descriptor_data[18] = { + USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ + 0x02, /* bDeviceClass (CDC). */ + 0x00, /* bDeviceSubClass. */ + 0x00, /* bDeviceProtocol. */ + 0x40, /* bMaxPacketSize. */ + 0x0179, /* idVendor. */ + 0x0001, /* idProduct. */ + 0x0200, /* bcdDevice. */ + 1, /* iManufacturer. */ + 2, /* iProduct. */ + 3, /* iSerialNumber. */ + 1) /* bNumConfigurations. */ +}; + +/* + * Device Descriptor wrapper. + */ +static const USBDescriptor vcom_device_descriptor = { + sizeof vcom_device_descriptor_data, + vcom_device_descriptor_data +}; + +/* Configuration Descriptor tree for a CDC.*/ +static const uint8_t vcom_configuration_descriptor_data[67] = { + /* Configuration Descriptor.*/ + USB_DESC_CONFIGURATION(67, /* wTotalLength. */ + 0x02, /* bNumInterfaces. */ + 0x01, /* bConfigurationValue. */ + 0, /* iConfiguration. */ + 0xC0, /* bmAttributes (self powered). */ + 50), /* bMaxPower (100mA). */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x01, /* bNumEndpoints. */ + 0x02, /* bInterfaceClass (Communications + Interface Class, CDC section + 4.2). */ + 0x02, /* bInterfaceSubClass (Abstract + Control Model, CDC section 4.3). */ + 0x01, /* bInterfaceProtocol (AT commands, + CDC section 4.4). */ + 0), /* iInterface. */ + /* Header Functional Descriptor (CDC section 5.2.3).*/ + USB_DESC_BYTE (5), /* bLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header + Functional Descriptor. */ + USB_DESC_BCD (0x0110), /* bcdCDC. */ + /* Call Management Functional Descriptor. */ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ + USB_DESC_BYTE (0x01), /* bDataInterface. */ + /* ACM Functional Descriptor.*/ + USB_DESC_BYTE (4), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract + Control Management Descriptor). */ + USB_DESC_BYTE (0x02), /* bmCapabilities. */ + /* Union Functional Descriptor.*/ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bMasterInterface (Communication + Class Interface). */ + USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class + Interface). */ + /* Endpoint 2 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, + 0x03, /* bmAttributes (Interrupt). */ + 0x0008, /* wMaxPacketSize. */ + 0xFF), /* bInterval. */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x02, /* bNumEndpoints. */ + 0x0A, /* bInterfaceClass (Data Class + Interface, CDC section 4.5). */ + 0x00, /* bInterfaceSubClass (CDC section + 4.6). */ + 0x00, /* bInterfaceProtocol (CDC section + 4.7). */ + 0x00), /* iInterface. */ + /* Endpoint 1 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00), /* bInterval. */ + /* Endpoint 1 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00) /* bInterval. */ +}; + +/* + * Configuration Descriptor wrapper. + */ +static const USBDescriptor vcom_configuration_descriptor = { + sizeof vcom_configuration_descriptor_data, + vcom_configuration_descriptor_data +}; + +/* + * U.S. English language identifier. + */ +static const uint8_t vcom_string0[] = { + USB_DESC_BYTE(4), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ +}; + +/* + * Vendor string. + */ +static const uint8_t vcom_string1[] = { + USB_DESC_BYTE(2+2*7), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'N', 0, 'o', 0, 'p', 0, 'e', 0, 'L', 0, 'a', 0, 'b', 0, +}; + +/* + * Device Description string. + */ +static const uint8_t vcom_string2[] = { + USB_DESC_BYTE(2+5*2), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'C', 0, 'h', 0, 'T', 0, 's', 0, 'y', 0, +}; + +/* + * Serial Number string. + */ +static const uint8_t vcom_string3[] = { + USB_DESC_BYTE(8), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + '0' + CH_KERNEL_MAJOR, 0, + '0' + CH_KERNEL_MINOR, 0, + '0' + CH_KERNEL_PATCH, 0 +}; + +/* + * Strings wrappers array. + */ +static const USBDescriptor vcom_strings[] = { + {sizeof vcom_string0, vcom_string0}, + {sizeof vcom_string1, vcom_string1}, + {sizeof vcom_string2, vcom_string2}, + {sizeof vcom_string3, vcom_string3} +}; + +/* + * Handles the GET_DESCRIPTOR callback. All required descriptors must be + * handled here. + */ +static const USBDescriptor *get_descriptor(USBDriver *usbp, + uint8_t dtype, + uint8_t dindex, + uint16_t lang) { + (void)usbp; + (void)lang; + switch (dtype) { + case USB_DESCRIPTOR_DEVICE: + return &vcom_device_descriptor; + case USB_DESCRIPTOR_CONFIGURATION: + return &vcom_configuration_descriptor; + case USB_DESCRIPTOR_STRING: + if (dindex < 4) + return &vcom_strings[dindex]; + } + return NULL; +} + +/** + * @brief IN EP1 state. + */ +static USBInEndpointState ep1instate; + +/** + * @brief OUT EP1 state. + */ +static USBOutEndpointState ep1outstate; + +/** + * @brief EP1 initialization structure (both IN and OUT). + */ +static const USBEndpointConfig ep1config = { + USB_EP_MODE_TYPE_BULK, + NULL, + sduDataTransmitted, + sduDataReceived, + 0x0040, + 0x0040, + &ep1instate, + &ep1outstate, + 2, + NULL +}; + +/** + * @brief IN EP2 state. + */ +static USBInEndpointState ep2instate; + +/** + * @brief EP2 initialization structure (IN only). + */ +static const USBEndpointConfig ep2config = { + USB_EP_MODE_TYPE_INTR, + NULL, + sduInterruptTransmitted, + NULL, + 0x0010, + 0x0000, + &ep2instate, + NULL, + 1, + NULL +}; + +/* + * Handles the USB driver global events. + */ +static void usb_event(USBDriver *usbp, usbevent_t event) { + extern SerialUSBDriver SDU1; + + switch (event) { + case USB_EVENT_RESET: + return; + case USB_EVENT_ADDRESS: + return; + case USB_EVENT_CONFIGURED: + chSysLockFromISR(); + + /* Enables the endpoints specified into the configuration. + Note, this callback is invoked from an ISR so I-Class functions + must be used.*/ + usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); + usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); + + /* Resetting the state of the CDC subsystem.*/ + sduConfigureHookI(&SDU1); + + chSysUnlockFromISR(); + return; + case USB_EVENT_SUSPEND: + chSysLockFromISR(); + + /* Disconnection event on suspend.*/ + sduDisconnectI(&SDU1); + + chSysUnlockFromISR(); + return; + case USB_EVENT_WAKEUP: + return; + case USB_EVENT_STALLED: + return; + } + return; +} + +/* + * Handles the USB driver global events. + */ +static void sof_handler(USBDriver *usbp) { + + (void)usbp; + + osalSysLockFromISR(); + sduSOFHookI(&SDU1); + osalSysUnlockFromISR(); +} + +/* + * USB driver configuration. + */ +const USBConfig usbcfg = { + usb_event, + get_descriptor, + sduRequestsHook, + sof_handler +}; + +/* + * Serial over USB driver configuration. + */ +const SerialUSBConfig serusbcfg = { + &USBD1, + USBD1_DATA_REQUEST_EP, + USBD1_DATA_AVAILABLE_EP, + USBD1_INTERRUPT_REQUEST_EP +}; diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.h new file mode 100644 index 0000000..5aa501e --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL25Z/USB_SERIAL/usbcfg.h @@ -0,0 +1,27 @@ +/* + (C) 2015-2016 flabbergast + Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _USBCFG_H_ +#define _USBCFG_H_ + +extern const USBConfig usbcfg; +extern SerialUSBConfig serusbcfg; +extern SerialUSBDriver SDU1; + +#endif /* _USBCFG_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/Makefile new file mode 100644 index 0000000..597f431 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/Makefile @@ -0,0 +1,212 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 -DCRT0_INIT_STACKS=0 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk +# Other files (optional). + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0plus + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/chconf.h new file mode 100644 index 0000000..eecc0a6 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/chconf.h @@ -0,0 +1,516 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/halconf.h new file mode 100644 index 0000000..6430fb2 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/halconf.h @@ -0,0 +1,381 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/main.c new file mode 100644 index 0000000..51efd71 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/main.c @@ -0,0 +1,89 @@ +/* + (c) 2015-2016 flabbergast + Based on K20 I2C demo (c) 2015 Fabio Utzig, http://fabioutzig.com + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +#define FXOS8700CQ_ADDR 0x1D + +// FXOS8700CQ internal register addresses +#define FXOS8700CQ_STATUS 0x00 +#define FXOS8700CQ_WHOAMI 0x0D +#define FXOS8700CQ_XYZ_DATA_CFG 0x0E +#define FXOS8700CQ_CTRL_REG1 0x2A +#define FXOS8700CQ_M_CTRL_REG1 0x5B +#define FXOS8700CQ_M_CTRL_REG2 0x5C +#define FXOS8700CQ_WHOAMI_VAL 0xC7 + +static bool i2cOk = false; + +static const I2CConfig i2ccfg = { + 400000 // clock +}; + +static THD_WORKING_AREA(waThread1, 64); +static THD_FUNCTION(Thread1, arg) { + + (void)arg; + chRegSetThreadName("Blinker"); + while(true) { + if(i2cOk) { + palSetPad(GPIO_LED_RED, PIN_LED_RED); /* Off red */ + palTogglePad(GPIO_LED_GREEN, PIN_LED_GREEN); /* Blink green */ + } else { + palSetPad(GPIO_LED_GREEN, PIN_LED_GREEN); /* Off green */ + palTogglePad(GPIO_LED_RED, PIN_LED_RED); /* Blink red */ + } + chThdSleepMilliseconds(500); + } +} + +/* + * Application entry point. + */ +int main(void) { + + uint8_t tx[1], rx[1]; + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Turn off the RGB LED. + */ + palSetPad(GPIO_LED_RED, PIN_LED_RED); /* red */ + palSetPad(GPIO_LED_GREEN, PIN_LED_GREEN); /* green */ + palSetPad(GPIO_LED_BLUE, PIN_LED_BLUE); /* blue */ + + i2cStart(&I2CD1, &i2ccfg); + + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + while (1) { + tx[0] = FXOS8700CQ_WHOAMI; + i2cMasterTransmitTimeout(&I2CD1, FXOS8700CQ_ADDR, tx, 1, rx, 1, TIME_INFINITE); + i2cOk = (rx[0] == FXOS8700CQ_WHOAMI_VAL) ? true : false; + chThdSleepMilliseconds(2000); + } +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/mcuconf.h new file mode 100644 index 0000000..70c8e80 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/mcuconf.h @@ -0,0 +1,54 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define KL2x_MCUCONF + +/* + * HAL driver system settings. + */ +#if 1 +/* PEE mode - 48MHz system clock driven by (8 MHz) external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL +#endif + +#if 0 +/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ +#endif + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +/* + * I2C driver settings. + */ +#define KINETIS_I2C_USE_I2C0 TRUE +#define KINETIS_I2C_USE_I2C1 FALSE +/* need to redefine this, since the default is for K20x */ +#define KINETIS_I2C_I2C0_PRIORITY 2 + +#endif /* _MCUCONF_H_ */ \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/readme.txt b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/readme.txt new file mode 100644 index 0000000..40474c1 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/I2C/readme.txt @@ -0,0 +1,20 @@ +********************************************************************* +** ChibiOS/RT I2C test demo for Freedom Board KL26Z. ** +********************************************************************* + +** TARGET ** + +The test runs on an Freescale Freedom KL26Z board. + +** The Demo ** + +This test tries to access the onboard FXOS8700CQ chip using the I2C bus. +It sends the command WHO_AM_I which has a standard answer that can be +verified. If the correct answer is received the GREEN led will blink. +If no answer or invalid answer is received the RED led will blink. + +** Build Procedure ** + +This test was built using the ARM GCC toolchain available at: + +https://launchpad.net/gcc-arm-embedded diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/Makefile new file mode 100644 index 0000000..bca626d --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/Makefile @@ -0,0 +1,213 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk +# Other files (optional). +include $(CHIBIOS)/test/rt/test.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0plus + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/chconf.h new file mode 100644 index 0000000..8c37f87 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/chconf.h @@ -0,0 +1,514 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file FRDM-KL26Z/PWM/chconf.h + * @brief Configuration file. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/halconf.h new file mode 100644 index 0000000..c65617e --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/halconf.h @@ -0,0 +1,381 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file FRDM-KL26Z/PWM/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/main.c new file mode 100644 index 0000000..740471a --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/main.c @@ -0,0 +1,172 @@ +/* + * (c) 2015 flabbergast + * Based on ChibiOS 3.0.1 demo code, license below. + * Licensed under the Apache License, Version 2.0. + */ + +/* + * ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "ch.h" +#include "hal.h" + +/* + * on FRDM-KL26Z: + * red LED on PTE29/TPM0_CH2 (AF3) + * green LED on PTE31/TPM0_CH4 (AF3) + * blue LED on PTD5/TPM0_CH5 (AF4) + */ + +#define PWM_DRIVER PWMD1 + +/* PWM config structure */ +/* Note: the PWM clock frequency must be so that + * SYSCLK / FREQ is a power of 2 between 1 and 128. + */ +static const PWMConfig pwmcfg = { + 750000, /* 750kHz PWM clock frequency. */ + 1000, /* PWM period is 1000 cycles. */ + /* meaning PWM resolution is 750 */ + NULL, /* no callback */ + { + {PWM_OUTPUT_DISABLED, NULL}, /* ch0: mode, no callback */ + {PWM_OUTPUT_DISABLED, NULL}, /* ch1: mode, no callback */ + {PWM_OUTPUT_ACTIVE_LOW, NULL}, /* ch2: mode, no callback */ + {PWM_OUTPUT_DISABLED, NULL}, /* ch3: mode, no callback */ + {PWM_OUTPUT_ACTIVE_LOW, NULL}, /* ch4: mode, no callback */ + {PWM_OUTPUT_ACTIVE_LOW, NULL} /* ch5: mode, no callback */ + }, +}; + +#define BREATHE_STEP 16 /* ms; = 4000ms/TABLE_SIZE */ + +/* Breathing Sleep LED brighness(PWM On period) table + * + * http://www.wolframalpha.com/input/?i=%28sin%28+x%2F64*pi%29**8+*+255%2C+x%3D0+to+63 + * (0..63).each {|x| p ((sin(x/64.0*PI)**8)*255).to_i } + */ +/* ruby -e "a = ((0..255).map{|x| Math.exp(Math.cos(Math::PI+(2*x*(Math::PI)/255)))-Math.exp(-1) }); m = a.max; a.map\!{|x| (10000*x/m).to_i}; p a" */ +#define TABLE_SIZE 256 +static const uint16_t breathing_table[TABLE_SIZE] = { + 0, 0, 1, 4, 7, 11, 17, 23, 30, 38, 47, 58, 69, 81, 94, 109, 124, 141, 159, 177, 197, 218, 241, 264, 289, 315, 343, 372, 402, 433, 466, 501, 537, 574, 613, 654, 696, 741, 786, 834, 883, 935, 988, 1043, 1100, 1159, 1220, 1283, 1349, 1416, 1486, 1558, 1632, 1709, 1788, 1870, 1954, 2040, 2129, 2220, 2314, 2411, 2510, 2611, 2715, 2822, 2932, 3044, 3158, 3275, 3395, 3517, 3641, 3768, 3897, 4028, 4162, 4298, 4436, 4576, 4717, 4861, 5006, 5152, 5300, 5449, 5600, 5751, 5903, 6055, 6208, 6361, 6513, 6666, 6818, 6970, 7120, 7269, 7417, 7563, 7708, 7850, 7990, 8127, 8261, 8391, 8519, 8643, 8762, 8878, 8989, 9095, 9196, 9293, 9383, 9469, 9548, 9622, 9689, 9750, 9805, 9853, 9895, 9930, 9957, 9978, 9992, 9999, 10000, 9992, 9978, 9957, 9930, 9895, 9853, 9805, 9750, 9689, 9622, 9548, 9469, 9383, 9293, 9196, 9095, 8989, 8878, 8762, 8643, 8519, 8391, 8261, 8127, 7990, 7850, 7708, 7563, 7417, 7269, 7120, 6970, 6818, 6666, 6513, 6361, 6208, 6055, 5903, 5751, 5600, 5449, 5300, 5152, 5006, 4861, 4717, 4576, 4436, 4298, 4162, 4028, 3897, 3768, 3641, 3517, 3395, 3275, 3158, 3044, 2932, 2822, 2715, 2611, 2510, 2411, 2314, 2220, 2129, 2040, 1954, 1870, 1788, 1709, 1632, 1558, 1486, 1416, 1349, 1283, 1220, 1159, 1100, 1043, 988, 935, 883, 834, 786, 741, 696, 654, 613, 574, 537, 501, 466, 433, 402, 372, 343, 315, 289, 264, 241, 218, 197, 177, 159, 141, 124, 109, 94, 81, 69, 58, 47, 38, 30, 23, 17, 11, 7, 4, 1, 0, 0 +}; + +uint16_t table_pos = 0; +uint8_t active_led = 0; + +static THD_WORKING_AREA(waBreatheThread, 128); +static THD_FUNCTION(BreatheThread, arg) { + (void)arg; + chRegSetThreadName("breatheThread"); + + while(true) { + switch(active_led) { + case 0: /* red LED */ + pwmEnableChannel(&PWM_DRIVER, 2, PWM_PERCENTAGE_TO_WIDTH(&PWM_DRIVER,breathing_table[table_pos])); + break; + case 1: /* green LED */ + pwmEnableChannel(&PWM_DRIVER, 4, PWM_PERCENTAGE_TO_WIDTH(&PWM_DRIVER,breathing_table[table_pos])); + break; + case 2: /* blue LED */ + pwmEnableChannel(&PWM_DRIVER, 5, PWM_PERCENTAGE_TO_WIDTH(&PWM_DRIVER,breathing_table[table_pos])); + break; + } + table_pos++; + if(table_pos == TABLE_SIZE) { + table_pos = 0; + active_led = (active_led+1) % 3; + } + chThdSleepMilliseconds(BREATHE_STEP); + } +} + +/* + * Check button thread + */ +static THD_WORKING_AREA(waButtonThread, 128); +static THD_FUNCTION(ButtonThread, arg) { + (void)arg; + chRegSetThreadName("buttonThread"); + + uint8_t newstate, state = PAL_HIGH; + + while(true) { + if(palReadLine(LINE_BUTTON) != state) { + chThdSleepMilliseconds(20); /* debounce */ + newstate = palReadLine(LINE_BUTTON); + if(newstate != state) { + state = newstate; + if(newstate == PAL_LOW) { + table_pos = (table_pos + 120)%TABLE_SIZE; + } + } + } + chThdSleepMilliseconds(20); + } +} + +/* + * Application entry point. + */ +int main(void) { + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Turn off the RGB LED. + */ + palSetLine(LINE_LED_RED); /* red */ + palSetLine(LINE_LED_GREEN); /* green */ + palSetLine(LINE_LED_BLUE); /* blue */ + + /* + * Create the button check thread. + */ + chThdCreateStatic(waButtonThread, sizeof(waButtonThread), NORMALPRIO, ButtonThread, NULL); + + /* + * Start the PWM driver, route TPM0 output to PTE29, PTE31, PTD5. + * Enable channels now to avoid a blink later. + */ + pwmStart(&PWM_DRIVER, &pwmcfg); + palSetLineMode(LINE_LED_RED, PAL_MODE_ALTERNATIVE_3); + palSetLineMode(LINE_LED_GREEN, PAL_MODE_ALTERNATIVE_3); + palSetLineMode(LINE_LED_BLUE, PAL_MODE_ALTERNATIVE_4); + pwmEnableChannel(&PWM_DRIVER, 2, 0); + pwmEnableChannel(&PWM_DRIVER, 4, 0); + pwmEnableChannel(&PWM_DRIVER, 5, 0); + + /* + * Create the breathe thread. + */ + chThdCreateStatic(waBreatheThread, sizeof(waBreatheThread), NORMALPRIO, BreatheThread, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing except + * sleeping in a loop and check the button state, when the button is + * pressed ... nothing happens. + */ + while(true) { + chThdSleepMilliseconds(500); + } +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/mcuconf.h new file mode 100644 index 0000000..3622a23 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/PWM/mcuconf.h @@ -0,0 +1,58 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define KL2x_MCUCONF + +/* + * HAL driver system settings. + */ +#if 1 +/* PEE mode - 48MHz system clock driven by (8 MHz) external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL +#endif + +#if 0 +/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ +#endif + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +/* + * USB driver settings + */ +#define KINETIS_USB_USE_USB0 TRUE +/* need to redefine this, since the default is for K20x */ +#define KINETIS_USB_USB0_IRQ_PRIORITY 2 + +/* + * PWM driver settings. + */ +#define KINETIS_PWM_USE_TPM0 TRUE + +#endif /* _MCUCONF_H_ */ \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/Makefile new file mode 100644 index 0000000..3cf61b4 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/Makefile @@ -0,0 +1,220 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/FREESCALE_FREEDOM_KL26Z/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk +# Other files (optional). +include $(CHIBIOS)/test/rt/test.mk +include $(CHIBIOS)/os/hal/lib/streams/streams.mk +include $(CHIBIOS)/os/various/shell/shell.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MKL2xZ128.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + $(STREAMSSRC) \ + $(SHELLSRC) \ + main.c \ + usbcfg.c \ + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(STREAMSINC) $(SHELLINC) + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0plus + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chconf.h new file mode 100644 index 0000000..c7ed185 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chconf.h @@ -0,0 +1,514 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file FRDM-KL26Z/USB_SERIAL/chconf.h + * @brief Configuration file. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chtsy.inf b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chtsy.inf new file mode 100644 index 0000000..4ae7d0b --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/chtsy.inf @@ -0,0 +1,106 @@ +;************************************************************ +; Windows USB CDC ACM Setup File +; Copyright (c) 2000 Microsoft Corporation + + +[Version] +Signature="$Windows NT$" +Class=Ports +ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} +Provider=%MFGNAME% +LayoutFile=layout.inf +CatalogFile=%MFGFILENAME%.cat +DriverVer=11/15/2007,5.1.2600.0 + +[Manufacturer] +%MFGNAME%=DeviceList, NTamd64 + +[DestinationDirs] +DefaultDestDir=12 + + +;------------------------------------------------------------------------------ +; Windows 2000/XP/Vista-32bit Sections +;------------------------------------------------------------------------------ + +[DriverInstall.nt] +include=mdmcpq.inf +CopyFiles=DriverCopyFiles.nt +AddReg=DriverInstall.nt.AddReg + +[DriverCopyFiles.nt] +usbser.sys,,,0x20 + +[DriverInstall.nt.AddReg] +HKR,,DevLoader,,*ntkern +HKR,,NTMPDriver,,%DRIVERFILENAME%.sys +HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" + +[DriverInstall.nt.Services] +AddService=usbser, 0x00000002, DriverService.nt + +[DriverService.nt] +DisplayName=%SERVICE% +ServiceType=1 +StartType=3 +ErrorControl=1 +ServiceBinary=%12%\%DRIVERFILENAME%.sys + +;------------------------------------------------------------------------------ +; Vista-64bit Sections +;------------------------------------------------------------------------------ + +[DriverInstall.NTamd64] +include=mdmcpq.inf +CopyFiles=DriverCopyFiles.NTamd64 +AddReg=DriverInstall.NTamd64.AddReg + +[DriverCopyFiles.NTamd64] +%DRIVERFILENAME%.sys,,,0x20 + +[DriverInstall.NTamd64.AddReg] +HKR,,DevLoader,,*ntkern +HKR,,NTMPDriver,,%DRIVERFILENAME%.sys +HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" + +[DriverInstall.NTamd64.Services] +AddService=usbser, 0x00000002, DriverService.NTamd64 + +[DriverService.NTamd64] +DisplayName=%SERVICE% +ServiceType=1 +StartType=3 +ErrorControl=1 +ServiceBinary=%12%\%DRIVERFILENAME%.sys + + +;------------------------------------------------------------------------------ +; Vendor and Product ID Definitions +;------------------------------------------------------------------------------ +; When developing your USB device, the VID and PID used in the PC side +; application program and the firmware on the microcontroller must match. +; Modify the below line to use your VID and PID. Use the format as shown below. +; Note: One INF file can be used for multiple devices with different VID and PIDs. +; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. +;------------------------------------------------------------------------------ +[SourceDisksFiles] +[SourceDisksNames] +[DeviceList] +%DESCRIPTION%=DriverInstall, USB\VID_0179&PID_0001 + +[DeviceList.NTamd64] +%DESCRIPTION%=DriverInstall, USB\VID_0179&PID_0001 + + +;------------------------------------------------------------------------------ +; String Definitions +;------------------------------------------------------------------------------ +;Modify these strings to customize your device +;------------------------------------------------------------------------------ +[Strings] +MFGFILENAME="ChTsy" +DRIVERFILENAME ="usbser" +MFGNAME="NopeLab" +INSTDISK="ChTsy CDC driver" +DESCRIPTION="ChTsy CDC driver" +SERVICE="USB RS-232 Emulation Driver" \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/halconf.h new file mode 100644 index 0000000..a299d39 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/halconf.h @@ -0,0 +1,353 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file FRDM-KL26Z/USB_SERIAL/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB TRUE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/main.c new file mode 100644 index 0000000..897dc58 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/main.c @@ -0,0 +1,168 @@ +/* + (C) 2015-2016 flabbergast + Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include +#include + +#include "ch.h" +#include "hal.h" + +#include "shell.h" +#include "chprintf.h" + +#include "usbcfg.h" + +/*===========================================================================*/ +/* Command line related. */ +/*===========================================================================*/ + +#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) + +/* Can be measured using dd if=/dev/xxxx of=/dev/null bs=512 count=10000.*/ +static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { + static uint8_t buf[] = + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: write\r\n"); + return; + } + + while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { +#if 1 + /* Writing in channel mode.*/ + chnWrite(&SDU1, buf, sizeof buf - 1); +#else + /* Writing in buffer mode.*/ + (void) obqGetEmptyBufferTimeout(&SDU1.obqueue, TIME_INFINITE); + memcpy(SDU1.obqueue.ptr, buf, SERIAL_USB_BUFFERS_SIZE); + obqPostFullBuffer(&SDU1.obqueue, SERIAL_USB_BUFFERS_SIZE); +#endif + } + chprintf(chp, "\r\n\nstopped\r\n"); +} + +static const ShellCommand commands[] = { + {"write", cmd_write}, + {NULL, NULL} +}; + +static const ShellConfig shell_cfg1 = { + (BaseSequentialStream *)&SDU1, + commands +}; + +/*===========================================================================*/ +/* Generic code. */ +/*===========================================================================*/ + +/* + * Red LED blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 128); +static THD_FUNCTION(Thread1, arg) { + + (void)arg; + chRegSetThreadName("blinker"); + while (true) { + systime_t time; + + time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; + palClearPad(GPIO_LED_RED, PIN_LED_RED); + chThdSleepMilliseconds(time); + palSetPad(GPIO_LED_RED, PIN_LED_RED); + chThdSleepMilliseconds(time); + } +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Turn off the RGB LED. + */ + palSetPad(GPIO_LED_RED, PIN_LED_RED); /* red */ + palSetPad(GPIO_LED_GREEN, PIN_LED_GREEN); /* green */ + palSetPad(GPIO_LED_BLUE, PIN_LED_BLUE); /* blue */ + + /* + * Initializes a serial-over-USB CDC driver. + */ + sduObjectInit(&SDU1); + sduStart(&SDU1, &serusbcfg); + + /* + * Activates the USB driver and then the USB bus pull-up on D+. + * Note, a delay is inserted in order to not have to disconnect the cable + * after a reset. + */ + usbDisconnectBus(serusbcfg.usbp); + chThdSleepMilliseconds(1500); + usbStart(serusbcfg.usbp, &usbcfg); + usbConnectBus(serusbcfg.usbp); + + /* + * Shell manager initialization. + */ + shellInit(); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Normal main() thread activity, spawning shells. + */ + while (true) { + if (SDU1.config->usbp->state == USB_ACTIVE) { + thread_t *shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE, + "shell", NORMALPRIO + 1, + shellThread, (void *)&shell_cfg1); + chThdWait(shelltp); /* Waiting termination. */ + } + chThdSleepMilliseconds(1000); + } +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/mcuconf.h new file mode 100644 index 0000000..42c9361 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/mcuconf.h @@ -0,0 +1,53 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define KL2x_MCUCONF + +/* + * HAL driver system settings. + */ +#if 0 +/* PEE mode - 48MHz system clock driven by (8 MHz) external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL +#endif + +#if 1 +/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ +#endif + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +/* + * USB driver settings + */ +#define KINETIS_USB_USE_USB0 TRUE +/* need to redefine this, since the default is for K20x */ +#define KINETIS_USB_USB0_IRQ_PRIORITY 2 + +#endif /* _MCUCONF_H_ */ \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.c b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.c new file mode 100644 index 0000000..3093640 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.c @@ -0,0 +1,329 @@ +/* + (C) 2015-2016 flabbergast + Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "hal.h" + +/* Virtual serial port over USB.*/ +SerialUSBDriver SDU1; + +/* + * Endpoints to be used for USBD1. + */ +#define USBD1_DATA_REQUEST_EP 1 +#define USBD1_DATA_AVAILABLE_EP 1 +#define USBD1_INTERRUPT_REQUEST_EP 2 + +/* + * USB Device Descriptor. + */ +static const uint8_t vcom_device_descriptor_data[18] = { + USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ + 0x02, /* bDeviceClass (CDC). */ + 0x00, /* bDeviceSubClass. */ + 0x00, /* bDeviceProtocol. */ + 0x40, /* bMaxPacketSize. */ + 0x0179, /* idVendor. */ + 0x0001, /* idProduct. */ + 0x0200, /* bcdDevice. */ + 1, /* iManufacturer. */ + 2, /* iProduct. */ + 3, /* iSerialNumber. */ + 1) /* bNumConfigurations. */ +}; + +/* + * Device Descriptor wrapper. + */ +static const USBDescriptor vcom_device_descriptor = { + sizeof vcom_device_descriptor_data, + vcom_device_descriptor_data +}; + +/* Configuration Descriptor tree for a CDC.*/ +static const uint8_t vcom_configuration_descriptor_data[67] = { + /* Configuration Descriptor.*/ + USB_DESC_CONFIGURATION(67, /* wTotalLength. */ + 0x02, /* bNumInterfaces. */ + 0x01, /* bConfigurationValue. */ + 0, /* iConfiguration. */ + 0xC0, /* bmAttributes (self powered). */ + 50), /* bMaxPower (100mA). */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x01, /* bNumEndpoints. */ + 0x02, /* bInterfaceClass (Communications + Interface Class, CDC section + 4.2). */ + 0x02, /* bInterfaceSubClass (Abstract + Control Model, CDC section 4.3). */ + 0x01, /* bInterfaceProtocol (AT commands, + CDC section 4.4). */ + 0), /* iInterface. */ + /* Header Functional Descriptor (CDC section 5.2.3).*/ + USB_DESC_BYTE (5), /* bLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header + Functional Descriptor. */ + USB_DESC_BCD (0x0110), /* bcdCDC. */ + /* Call Management Functional Descriptor. */ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ + USB_DESC_BYTE (0x01), /* bDataInterface. */ + /* ACM Functional Descriptor.*/ + USB_DESC_BYTE (4), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract + Control Management Descriptor). */ + USB_DESC_BYTE (0x02), /* bmCapabilities. */ + /* Union Functional Descriptor.*/ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bMasterInterface (Communication + Class Interface). */ + USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class + Interface). */ + /* Endpoint 2 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, + 0x03, /* bmAttributes (Interrupt). */ + 0x0008, /* wMaxPacketSize. */ + 0xFF), /* bInterval. */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x02, /* bNumEndpoints. */ + 0x0A, /* bInterfaceClass (Data Class + Interface, CDC section 4.5). */ + 0x00, /* bInterfaceSubClass (CDC section + 4.6). */ + 0x00, /* bInterfaceProtocol (CDC section + 4.7). */ + 0x00), /* iInterface. */ + /* Endpoint 1 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00), /* bInterval. */ + /* Endpoint 1 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00) /* bInterval. */ +}; + +/* + * Configuration Descriptor wrapper. + */ +static const USBDescriptor vcom_configuration_descriptor = { + sizeof vcom_configuration_descriptor_data, + vcom_configuration_descriptor_data +}; + +/* + * U.S. English language identifier. + */ +static const uint8_t vcom_string0[] = { + USB_DESC_BYTE(4), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ +}; + +/* + * Vendor string. + */ +static const uint8_t vcom_string1[] = { + USB_DESC_BYTE(2+2*7), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'N', 0, 'o', 0, 'p', 0, 'e', 0, 'L', 0, 'a', 0, 'b', 0, +}; + +/* + * Device Description string. + */ +static const uint8_t vcom_string2[] = { + USB_DESC_BYTE(2+5*2), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'C', 0, 'h', 0, 'T', 0, 's', 0, 'y', 0, +}; + +/* + * Serial Number string. + */ +static const uint8_t vcom_string3[] = { + USB_DESC_BYTE(8), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + '0' + CH_KERNEL_MAJOR, 0, + '0' + CH_KERNEL_MINOR, 0, + '0' + CH_KERNEL_PATCH, 0 +}; + +/* + * Strings wrappers array. + */ +static const USBDescriptor vcom_strings[] = { + {sizeof vcom_string0, vcom_string0}, + {sizeof vcom_string1, vcom_string1}, + {sizeof vcom_string2, vcom_string2}, + {sizeof vcom_string3, vcom_string3} +}; + +/* + * Handles the GET_DESCRIPTOR callback. All required descriptors must be + * handled here. + */ +static const USBDescriptor *get_descriptor(USBDriver *usbp, + uint8_t dtype, + uint8_t dindex, + uint16_t lang) { + (void)usbp; + (void)lang; + switch (dtype) { + case USB_DESCRIPTOR_DEVICE: + return &vcom_device_descriptor; + case USB_DESCRIPTOR_CONFIGURATION: + return &vcom_configuration_descriptor; + case USB_DESCRIPTOR_STRING: + if (dindex < 4) + return &vcom_strings[dindex]; + } + return NULL; +} + +/** + * @brief IN EP1 state. + */ +static USBInEndpointState ep1instate; + +/** + * @brief OUT EP1 state. + */ +static USBOutEndpointState ep1outstate; + +/** + * @brief EP1 initialization structure (both IN and OUT). + */ +static const USBEndpointConfig ep1config = { + USB_EP_MODE_TYPE_BULK, + NULL, + sduDataTransmitted, + sduDataReceived, + 0x0040, + 0x0040, + &ep1instate, + &ep1outstate, + 2, + NULL +}; + +/** + * @brief IN EP2 state. + */ +static USBInEndpointState ep2instate; + +/** + * @brief EP2 initialization structure (IN only). + */ +static const USBEndpointConfig ep2config = { + USB_EP_MODE_TYPE_INTR, + NULL, + sduInterruptTransmitted, + NULL, + 0x0010, + 0x0000, + &ep2instate, + NULL, + 1, + NULL +}; + +/* + * Handles the USB driver global events. + */ +static void usb_event(USBDriver *usbp, usbevent_t event) { + extern SerialUSBDriver SDU1; + + switch (event) { + case USB_EVENT_RESET: + return; + case USB_EVENT_ADDRESS: + return; + case USB_EVENT_CONFIGURED: + chSysLockFromISR(); + + /* Enables the endpoints specified into the configuration. + Note, this callback is invoked from an ISR so I-Class functions + must be used.*/ + usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); + usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); + + /* Resetting the state of the CDC subsystem.*/ + sduConfigureHookI(&SDU1); + + chSysUnlockFromISR(); + return; + case USB_EVENT_SUSPEND: + chSysLockFromISR(); + + /* Disconnection event on suspend.*/ + sduDisconnectI(&SDU1); + + chSysUnlockFromISR(); + return; + case USB_EVENT_WAKEUP: + return; + case USB_EVENT_STALLED: + return; + } + return; +} + +/* + * Handles the USB driver global events. + */ +static void sof_handler(USBDriver *usbp) { + + (void)usbp; + + osalSysLockFromISR(); + sduSOFHookI(&SDU1); + osalSysUnlockFromISR(); +} + +/* + * USB driver configuration. + */ +const USBConfig usbcfg = { + usb_event, + get_descriptor, + sduRequestsHook, + sof_handler +}; + +/* + * Serial over USB driver configuration. + */ +const SerialUSBConfig serusbcfg = { + &USBD1, + USBD1_DATA_REQUEST_EP, + USBD1_DATA_AVAILABLE_EP, + USBD1_INTERRUPT_REQUEST_EP +}; diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.h b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.h new file mode 100644 index 0000000..5aa501e --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/FRDM-KL26Z/USB_SERIAL/usbcfg.h @@ -0,0 +1,27 @@ +/* + (C) 2015-2016 flabbergast + Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _USBCFG_H_ +#define _USBCFG_H_ + +extern const USBConfig usbcfg; +extern SerialUSBConfig serusbcfg; +extern SerialUSBDriver SDU1; + +#endif /* _USBCFG_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/Makefile new file mode 100644 index 0000000..16025f3 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/Makefile @@ -0,0 +1,213 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk +include ./board/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk +# Other files (optional). + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MKL27Z256.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0plus + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.c b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.c new file mode 100644 index 0000000..0f34452 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.c @@ -0,0 +1,158 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +#if HAL_USE_PAL || defined(__DOXYGEN__) +/** + * @brief PAL setup. + * @details Digital I/O ports static configuration as defined in @p board.h. + * This variable is used by the HAL when initializing the PAL driver. + */ +const PALConfig pal_default_config = +{ + .ports = { + { + /* + * PORTA setup. + * + * on pads: PTA1, PTA2, PTA5, PTA18, PTA19 + * + * PTA0/3 SWD (default SWD, ALT_7: SWD, ALT_1: PTA0/3) + * PTA4 NMI button (default NMI_b, ALT_1: PTA4) + * PTA20 RESET button (default RESET, ALT_7: RESET, ALT_1: PTA20) + */ + .port = IOPORT1, + .pads = { + PAL_MODE_ALTERNATIVE_7, PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, + PAL_MODE_ALTERNATIVE_7, PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_INPUT_ANALOG, PAL_MODE_INPUT_ANALOG, PAL_MODE_ALTERNATIVE_7, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + }, + }, + { + /* + * PORTB setup. + * + * on pads: PTB0, PTB1 + * LED: PTB18 + */ + .port = IOPORT2, + .pads = { + PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + }, + }, + { + /* + * PORTC setup. + * + * on pads: PTC1, PTC2, PTC3, PTC6, PTC7, PTC8, PTC9 + */ + .port = IOPORT3, + .pads = { + PAL_MODE_UNCONNECTED, PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, + PAL_MODE_INPUT_PULLUP, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, + PAL_MODE_INPUT_PULLUP, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + }, + }, + { + /* + * PORTD setup. + * + * on pads: PTD0 - PTD7 + */ + .port = IOPORT4, + .pads = { + PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, + PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, + PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + }, + }, + { + /* + * PORTE setup. + * + * on pads: PTE0, PTE1, PTE24, PTE25, PTE29, PTE30 + */ + .port = IOPORT5, + .pads = { + PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_OUTPUT_PUSHPULL, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_INPUT_PULLUP, + PAL_MODE_INPUT_PULLUP, PAL_MODE_UNCONNECTED, + }, + }, + }, +}; +#endif + +/** + * @brief Early initialization code. + * @details This initialization must be performed just after stack setup + * and before any other initialization. + */ +void __early_init(void) { + + kl2x_clock_init(); +} + +/** + * @brief Board-specific initialization code. + * @todo Add your board-specific code, if any. + */ +void boardInit(void) { +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.h b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.h new file mode 100644 index 0000000..1c61915 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.h @@ -0,0 +1,53 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +/* + * Setup for a custom KL27Z breakout board. + */ + +/* + * Board identifier. + */ +#define BOARD_KL27Z_BREAKOUT +#define BOARD_NAME "Custom KL27Z breakout" + +/* + * MCU type + */ +#define KL27Zxxx + +/* + * Onboard features. + */ +#define GPIO_LED IOPORT2 +#define PIN_LED 18 +#define GPIO_BUTTON IOPORT1 +#define PIN_BUTTON 4 + +#if !defined(_FROM_ASM_) +#ifdef __cplusplus +extern "C" { +#endif + void boardInit(void); +#ifdef __cplusplus +} +#endif +#endif /* _FROM_ASM_ */ + +#endif /* _BOARD_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.mk b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.mk new file mode 100644 index 0000000..14102c4 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/board/board.mk @@ -0,0 +1,5 @@ +# List of all the board related files. +BOARDSRC = ./board/board.c + +# Required include directories +BOARDINC = ./board diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/chconf.h new file mode 100644 index 0000000..41259a0 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/chconf.h @@ -0,0 +1,516 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file KL27Z/BLINK/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY TRUE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/flash_via_bldr.sh b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/flash_via_bldr.sh new file mode 100644 index 0000000..8b0f26f --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/flash_via_bldr.sh @@ -0,0 +1,26 @@ +#!/bin/bash + +if [ -z `which blhost` ]; then + echo "You'll need to get the 'blhost' utility from Freescale." + echo 'http://www.freescale.com/products/arm-processors/kinetis-cortex-m/kinetis-symbols-footprints-and-models/kinetis-bootloader:KBOOT' + exit 1 +fi + +if [ ! -f build/ch.bin ]; then + echo "Perhaps you should compile the firmware first." + exit 2 +fi + +if [[ `blhost -u -- get-property 1` == *"cannot open USB HID device"* ]]; then + echo "Perhaps you should put the device in the bootloader mode first." + exit 3 +fi + +echo "-> Erasing flash..." +blhost -u -- flash-erase-all + +echo "-> Flashing firmware..." +blhost -u -- write-memory 0 build/ch.bin + +echo "-> Resetting MCU (allow 5 seconds for the firmware to start)..." +blhost -u -- reset diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/halconf.h new file mode 100644 index 0000000..2e0b28c --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/halconf.h @@ -0,0 +1,187 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file KL27Z/BLINK/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/main.c new file mode 100644 index 0000000..7af54b6 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/main.c @@ -0,0 +1,94 @@ +/* + ChibiOS/RT KL27 example - Copyright (C) 2015 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ +#include "hal.h" + +/* + * Blink thread + */ +static THD_WORKING_AREA(waBlinkThread, 128); +static THD_FUNCTION(BlinkThread, arg) { + (void)arg; + + while(TRUE) { + palTogglePad(GPIO_LED, PIN_LED); + chThdSleepMilliseconds(700); + } +} + +/* + * Check button thread + */ +static THD_WORKING_AREA(waButtonThread, 128); +static THD_FUNCTION(ButtonThread, arg) { + (void)arg; + chRegSetThreadName("buttonThread"); + + uint8_t newstate, state = PAL_HIGH; + + while(true) { + if(palReadPad(GPIO_BUTTON, PIN_BUTTON) != state) { + chThdSleepMilliseconds(20); /* debounce */ + newstate = palReadPad(GPIO_BUTTON, PIN_BUTTON); + if(newstate != state) { + state = newstate; + if(newstate == PAL_LOW) { + // palTogglePad(GPIO_LED, PIN_LED); + /* jump to bootloader */ + /* force boot from ROM */ + RCM->FM = RCM_FM_FORCEROM(2); + /* request RESET */ + #define SCB_AIRCR_VECTKEY_WRITEMAGIC 0x05FA0000 + SCB->AIRCR = SCB_AIRCR_VECTKEY_WRITEMAGIC | SCB_AIRCR_SYSRESETREQ_Msk; + } + } + } + chThdSleepMilliseconds(20); + } +} + +/* + * Application entry point. + */ +int main(void) { + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Create the blink thread. + */ + chThdCreateStatic(waBlinkThread, sizeof(waBlinkThread), NORMALPRIO, BlinkThread, NULL); + + /* + * Create the button check thread. + */ + chThdCreateStatic(waButtonThread, sizeof(waButtonThread), NORMALPRIO, ButtonThread, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while(TRUE) { + chThdSleepMilliseconds(500); + } + + return 0; +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/mcuconf.h new file mode 100644 index 0000000..7048564 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/KL27Z/BLINK/mcuconf.h @@ -0,0 +1,79 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define KL2x_MCUCONF + +/* + * HAL driver system settings. + */ +#if 1 +/* High-frequency internal RC, 48MHz, possible USB clock recovery */ +#define KINETIS_MCGLITE_MODE KINETIS_MCGLITE_MODE_HIRC +#define KINETIS_SYSCLK_FREQUENCY 48000000UL +#define KINETIS_CLKDIV1_OUTDIV1 1 +#endif + +#if 0 +/* Low-frequency internal RC, 8 MHz mode */ +#define KINETIS_MCGLITE_MODE KINETIS_MCGLITE_MODE_LIRC8M +#define KINETIS_SYSCLK_FREQUENCY 8000000UL +#define KINETIS_CLKDIV1_OUTDIV1 1 +#endif + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +/* + * USB driver settings + */ +#define KINETIS_USB_USE_USB0 TRUE +/* need to redefine this, since the default is for K20x */ +#define KINETIS_USB_USB0_IRQ_PRIORITY 2 + +/* + * Kinetis FOPT configuration byte + */ +/* for KL27: */ +// #define KINETIS_NV_FOPT_BYTE 0x3D +/* NV_FOPT: bit7-6/BOOTSRC_SEL=0b00 (11=from ROM; 00=from FLASH) + bit5/FAST_INIT=1, bit4/LPBOOT1=1, + bit3/RESET_PIN_CFG=1, bit2/NMI_DIS=1, + bit1/BOOTPIN_OPT=0, bit0/LPBOOT0=1 */ +/* BOOTPIN_OPT: 1=boot depends on BOOTSRC_SEL + 0=boot samples BOOTCFG0=NMI pin */ +/* Boot sequence, page 88 of manual: + * - If the NMI/BOOTCFG0 input is high or the NMI function is disabled in FTFA_FOPT, the CPU begins execution at the PC location. + * - If the NMI/BOOTCFG0 input is low, the NMI function is enabled in FTFA_FOPT, and FTFA_FOPT[BOOTPIN_OPT] = 1, this results in an NMI interrupt. The processor executes an Exception Entry and reads the NMI interrupt handler address from vector-table offset 8. The CPU begins execution at the NMI interrupt handler. + * - When FTFA_FOPT[BOOTPIN_OPT] = 0, it forces boot from ROM if NMI/BOOTCFG0 pin set to 0. + * + * Observed behaviour: + * - when BOOTPIN_OPT=0, BOOTSRC_SEL still matters: + * - if 0b11 (from ROM), it still boots from ROM, even if BOOTCFG0 pin + * is high/floating, but leaves ROM and runs user app after + * 5 seconds delay. + * - if 0b00 (from FLASH), reset/powerup jumps to user app unless + * BOOTCFG0 pin is asserted. + * - in any case, reset when in bootloader induces the 5 second delay + * before starting the user app. + * + */ + +#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/Makefile new file mode 100644 index 0000000..884d20e --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/Makefile @@ -0,0 +1,222 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/MCHCK_K20/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). + +# Define linker script file here +# Use BLDR4 for a 4k bootloader, BLDR3 for a 3k bootloader +LDSCRIPT= $(STARTUPLD)/MK20DX128BLDR4.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +# VTOR moved to after the bootloader; use 0x1000 for a 4k bootloader, +# 0xc00 for a 3k bootloader +UDEFS = -DCORTEX_VTOR_INIT=0x00001000 + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/chconf.h new file mode 100644 index 0000000..b2448a9 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/chconf.h @@ -0,0 +1,514 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file MCHCK/BOOTLOADER/chconf.h + * @brief Configuration file. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY TRUE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/halconf.h new file mode 100644 index 0000000..ef54a5d --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/halconf.h @@ -0,0 +1,187 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file MCHCK/BOOTLOADER/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/main.c new file mode 100644 index 0000000..a3729b7 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/main.c @@ -0,0 +1,77 @@ +/* + (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ +#include "hal.h" + +#define BTN_GPIO TEENSY_PIN2_IOPORT +#define BTN_PIN TEENSY_PIN2 + +/* + * Jump to bootloader on MCHCK. + */ +#define SCB_AIRCR_VECTKEY_WRITEMAGIC 0x05FA0000 +const uint8_t sys_reset_to_loader_magic[] = "\xff\x00\x7fRESET TO LOADER\x7f\x00\xff"; + +void jump_to_bootloader(void) { + __builtin_memcpy((void *)VBAT, (const void *)sys_reset_to_loader_magic, sizeof(sys_reset_to_loader_magic)); + // request reset + SCB->AIRCR = SCB_AIRCR_VECTKEY_WRITEMAGIC | SCB_AIRCR_SYSRESETREQ_Msk; +} + +/* + * Blink thread. + */ + +static THD_WORKING_AREA(waBlinkThread, 128); +static THD_FUNCTION(BlinkThread, arg) { + (void)arg; + uint8_t i; + + // while(TRUE) { + for(i=0; i<10; i++) { + palTogglePad(GPIOB, GPIOB_LED); + chThdSleepMilliseconds(700); + } + jump_to_bootloader(); +} + +/* + * Application entry point. + */ +int main(void) { + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Create the blink thread. + */ + chThdCreateStatic(waBlinkThread, sizeof(waBlinkThread), NORMALPRIO, BlinkThread, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while(TRUE) { + chThdSleepMilliseconds(500); + } + + return 0; +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/mcuconf.h new file mode 100644 index 0000000..6b69edb --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/BOOTLOADER/mcuconf.h @@ -0,0 +1,41 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define K20x_MCUCONF + +/* + * HAL driver system settings. + */ +/* FEI mode - 48 MHz with internal 32.768 kHz crystal */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#define KINETIS_CLKDIV1_OUTDIV1 1 +#define KINETIS_CLKDIV1_OUTDIV2 1 +#define KINETIS_CLKDIV1_OUTDIV4 2 +#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY +#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2 + +/* + * PWM driver system settings. + */ +#define KINETIS_PWM_USE_FTM0 TRUE + +#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/Makefile new file mode 100644 index 0000000..884d20e --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/Makefile @@ -0,0 +1,222 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/MCHCK_K20/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). + +# Define linker script file here +# Use BLDR4 for a 4k bootloader, BLDR3 for a 3k bootloader +LDSCRIPT= $(STARTUPLD)/MK20DX128BLDR4.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +# VTOR moved to after the bootloader; use 0x1000 for a 4k bootloader, +# 0xc00 for a 3k bootloader +UDEFS = -DCORTEX_VTOR_INIT=0x00001000 + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/README.md b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/README.md new file mode 100644 index 0000000..6367722 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/README.md @@ -0,0 +1,7 @@ +# "Soft" PWM demo + +The PWM in this demo is "soft", meaning that it does use a hardware timer to run, but the output is not directly routed to a pin; a callback functions which turn a LED on and off are used instead. + +## Notes + +The brightness percentages it goes only up to 9900 (99%) instead of 10000 (100%); otherwise there is a noticeable blink in the top of the cycle. The reason is that the on/off callback functions take too long to execute for this kind of (relatively fast) timer. Likewise, '0' (0%) in the cycle actually means that the LED doesn't get turned off, because the channel notification function that turns the LED off doesn't get called. So in a setup like this one, '1' should be the minimum; although it does mean that the LED is never fully off. diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/chconf.h new file mode 100644 index 0000000..034c6cc --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/chconf.h @@ -0,0 +1,514 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file MCHCK/PWM/chconf.h + * @brief Configuration file. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/halconf.h new file mode 100644 index 0000000..f691656 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/halconf.h @@ -0,0 +1,353 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file MCHCK/PWM/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/main.c new file mode 100644 index 0000000..f92512e --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/main.c @@ -0,0 +1,116 @@ +/* + (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ +#include "hal.h" + +#define PWM_DRIVER PWMD1 + +static void pwmpcb(PWMDriver *pwmp) { + (void)pwmp; + palSetLine(LINE_LED); +} + +static void pwmc0cb(PWMDriver *pwmp) { + (void)pwmp; + palClearLine(LINE_LED); +} + +static PWMConfig pwmcfg = { + 24000000, /* 24MHz PWM clock frequency. */ + 12000, /* Initial PWM period 1ms */ + pwmpcb, + { + {PWM_OUTPUT_DISABLED, pwmc0cb}, + {PWM_OUTPUT_DISABLED, NULL}, + }, +}; + +/* Breathing Sleep LED brighness(PWM On period) table + * + * http://www.wolframalpha.com/input/?i=%28sin%28+x%2F64*pi%29**8+*+255%2C+x%3D0+to+63 + * (0..63).each {|x| p ((sin(x/64.0*PI)**8)*255).to_i } + */ +/* ruby -e "a = ((0..255).map{|x| Math.exp(Math.cos(Math::PI+(2*x*(Math::PI)/255)))-Math.exp(-1) }); m = a.max; a.map\!{|x| (9900*x/m).to_i+1}; p a" */ +#define BREATHE_STEP 16 /* ms; = 4000ms/TABLE_SIZE */ +#define TABLE_SIZE 256 +static const uint16_t breathing_table[TABLE_SIZE] = { + 1, 1, 2, 5, 8, 12, 17, 24, 31, 39, 48, 58, 69, 81, 95, 109, 124, 140, 158, 177, 196, 217, 239, 263, 287, 313, 340, 369, 399, 430, 463, 497, 532, 570, 608, 649, 691, 734, 779, 827, 875, 926, 979, 1033, 1090, 1148, 1209, 1271, 1336, 1403, 1472, 1543, 1617, 1693, 1771, 1852, 1935, 2021, 2109, 2199, 2292, 2387, 2486, 2586, 2689, 2795, 2903, 3014, 3127, 3243, 3362, 3482, 3606, 3731, 3859, 3989, 4122, 4256, 4392, 4531, 4671, 4813, 4957, 5102, 5248, 5396, 5545, 5694, 5845, 5995, 6147, 6298, 6449, 6600, 6751, 6901, 7050, 7198, 7344, 7489, 7632, 7772, 7911, 8046, 8179, 8309, 8435, 8557, 8676, 8790, 8900, 9005, 9105, 9201, 9291, 9375, 9454, 9527, 9593, 9654, 9708, 9756, 9797, 9831, 9859, 9880, 9894, 9900, 9901, 9894, 9880, 9859, 9831, 9797, 9756, 9708, 9654, 9593, 9527, 9454, 9375, 9291, 9201, 9105, 9005, 8900, 8790, 8676, 8557, 8435, 8309, 8179, 8046, 7911, 7772, 7632, 7489, 7344, 7198, 7050, 6901, 6751, 6600, 6449, 6298, 6147, 5995, 5845, 5694, 5545, 5396, 5248, 5102, 4957, 4813, 4671, 4531, 4392, 4256, 4122, 3989, 3859, 3731, 3606, 3482, 3362, 3243, 3127, 3014, 2903, 2795, 2689, 2586, 2486, 2387, 2292, 2199, 2109, 2021, 1935, 1852, 1771, 1693, 1617, 1543, 1472, 1403, 1336, 1271, 1209, 1148, 1090, 1033, 979, 926, 875, 827, 779, 734, 691, 649, 608, 570, 532, 497, 463, 430, 399, 369, 340, 313, 287, 263, 239, 217, 196, 177, 158, 140, 124, 109, 95, 81, 69, 58, 48, 39, 31, 24, 17, 12, 8, 5, 2, 1, 1 +}; + +uint16_t table_pos = 0; + +static THD_WORKING_AREA(waBreatheThread, 128); +static THD_FUNCTION(BreatheThread, arg) { + (void)arg; + chRegSetThreadName("breatheThread"); + + while(!chThdShouldTerminateX()) { + pwmEnableChannel(&PWM_DRIVER, 0, PWM_PERCENTAGE_TO_WIDTH(&PWM_DRIVER,breathing_table[table_pos])); + table_pos = (table_pos+1) % TABLE_SIZE; + chThdSleepMilliseconds(BREATHE_STEP); + } +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Initialize the PWM driver. + */ + pwmStart(&PWM_DRIVER, &pwmcfg); + pwmEnablePeriodicNotification(&PWM_DRIVER); + + /* + * Starts the PWM channel 0; turn the LED off. + */ + pwmEnableChannel(&PWM_DRIVER, 0, PWM_PERCENTAGE_TO_WIDTH(&PWM_DRIVER, 0)); + pwmEnableChannelNotification(&PWM_DRIVER, 0); // MUST be before EnableChannel... + + /* + * Create the breathe thread. + */ + thread_t *breathe_thread_p; + breathe_thread_p = chThdCreateStatic(waBreatheThread, sizeof(waBreatheThread), NORMALPRIO, BreatheThread, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (!chThdShouldTerminateX()) { + chThdSleepMilliseconds(500); + } + + chThdTerminate(breathe_thread_p); + chThdSleepMilliseconds(2*BREATHE_STEP); + + /* + * Disables channel 0 and stops the drivers. + */ + pwmDisableChannel(&PWM_DRIVER, 0); + pwmStop(&PWM_DRIVER); + + return 0; +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/mcuconf.h new file mode 100644 index 0000000..6b69edb --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/PWM/mcuconf.h @@ -0,0 +1,41 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define K20x_MCUCONF + +/* + * HAL driver system settings. + */ +/* FEI mode - 48 MHz with internal 32.768 kHz crystal */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#define KINETIS_CLKDIV1_OUTDIV1 1 +#define KINETIS_CLKDIV1_OUTDIV2 1 +#define KINETIS_CLKDIV1_OUTDIV4 2 +#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY +#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2 + +/* + * PWM driver system settings. + */ +#define KINETIS_PWM_USE_FTM0 TRUE + +#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/Makefile new file mode 100644 index 0000000..b4d1ef8 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/Makefile @@ -0,0 +1,228 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/MCHCK_K20/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). +include $(CHIBIOS)/test/rt/test.mk +include $(CHIBIOS)/os/hal/lib/streams/streams.mk +include $(CHIBIOS)/os/various/shell/shell.mk + +# Define linker script file here +# Use BLDR4 for a 4k bootloader, BLDR3 for a 3k bootloader +LDSCRIPT= $(STARTUPLD)/MK20DX128BLDR4.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + $(STREAMSSRC) \ + $(SHELLSRC) \ + usbcfg.c \ + main.c \ + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(STREAMSINC) $(SHELLINC) + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +# VTOR moved to after the bootloader; use 0x1000 for a 4k bootloader, +# 0xc00 for a 3k bootloader +UDEFS = -DCORTEX_VTOR_INIT=0x00001000 + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/chconf.h new file mode 100644 index 0000000..7371b49 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/chconf.h @@ -0,0 +1,513 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file MCHCK/USB_SERIAL/chconf.h + * @brief Configuration file. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/chtsy.inf b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/chtsy.inf new file mode 100644 index 0000000..4ae7d0b --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/chtsy.inf @@ -0,0 +1,106 @@ +;************************************************************ +; Windows USB CDC ACM Setup File +; Copyright (c) 2000 Microsoft Corporation + + +[Version] +Signature="$Windows NT$" +Class=Ports +ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} +Provider=%MFGNAME% +LayoutFile=layout.inf +CatalogFile=%MFGFILENAME%.cat +DriverVer=11/15/2007,5.1.2600.0 + +[Manufacturer] +%MFGNAME%=DeviceList, NTamd64 + +[DestinationDirs] +DefaultDestDir=12 + + +;------------------------------------------------------------------------------ +; Windows 2000/XP/Vista-32bit Sections +;------------------------------------------------------------------------------ + +[DriverInstall.nt] +include=mdmcpq.inf +CopyFiles=DriverCopyFiles.nt +AddReg=DriverInstall.nt.AddReg + +[DriverCopyFiles.nt] +usbser.sys,,,0x20 + +[DriverInstall.nt.AddReg] +HKR,,DevLoader,,*ntkern +HKR,,NTMPDriver,,%DRIVERFILENAME%.sys +HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" + +[DriverInstall.nt.Services] +AddService=usbser, 0x00000002, DriverService.nt + +[DriverService.nt] +DisplayName=%SERVICE% +ServiceType=1 +StartType=3 +ErrorControl=1 +ServiceBinary=%12%\%DRIVERFILENAME%.sys + +;------------------------------------------------------------------------------ +; Vista-64bit Sections +;------------------------------------------------------------------------------ + +[DriverInstall.NTamd64] +include=mdmcpq.inf +CopyFiles=DriverCopyFiles.NTamd64 +AddReg=DriverInstall.NTamd64.AddReg + +[DriverCopyFiles.NTamd64] +%DRIVERFILENAME%.sys,,,0x20 + +[DriverInstall.NTamd64.AddReg] +HKR,,DevLoader,,*ntkern +HKR,,NTMPDriver,,%DRIVERFILENAME%.sys +HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" + +[DriverInstall.NTamd64.Services] +AddService=usbser, 0x00000002, DriverService.NTamd64 + +[DriverService.NTamd64] +DisplayName=%SERVICE% +ServiceType=1 +StartType=3 +ErrorControl=1 +ServiceBinary=%12%\%DRIVERFILENAME%.sys + + +;------------------------------------------------------------------------------ +; Vendor and Product ID Definitions +;------------------------------------------------------------------------------ +; When developing your USB device, the VID and PID used in the PC side +; application program and the firmware on the microcontroller must match. +; Modify the below line to use your VID and PID. Use the format as shown below. +; Note: One INF file can be used for multiple devices with different VID and PIDs. +; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. +;------------------------------------------------------------------------------ +[SourceDisksFiles] +[SourceDisksNames] +[DeviceList] +%DESCRIPTION%=DriverInstall, USB\VID_0179&PID_0001 + +[DeviceList.NTamd64] +%DESCRIPTION%=DriverInstall, USB\VID_0179&PID_0001 + + +;------------------------------------------------------------------------------ +; String Definitions +;------------------------------------------------------------------------------ +;Modify these strings to customize your device +;------------------------------------------------------------------------------ +[Strings] +MFGFILENAME="ChTsy" +DRIVERFILENAME ="usbser" +MFGNAME="NopeLab" +INSTDISK="ChTsy CDC driver" +DESCRIPTION="ChTsy CDC driver" +SERVICE="USB RS-232 Emulation Driver" \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/halconf.h new file mode 100644 index 0000000..466af01 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/halconf.h @@ -0,0 +1,362 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file MCHCK/USB_SERIAL/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB TRUE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/* + * @brief Enable debugging messages over SD1. + * + * @note Requires HAL_USE_SERIAL. + */ +#if HAL_USE_SERIAL +#define DEBUG_USB +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/main.c new file mode 100644 index 0000000..56e02af --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/main.c @@ -0,0 +1,161 @@ +/* + (C) 2015-2016 flabbergast + Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include +#include + +#include "ch.h" +#include "hal.h" + +#include "shell.h" +#include "chprintf.h" + +#include "usbcfg.h" + +/*===========================================================================*/ +/* Command line related. */ +/*===========================================================================*/ + +#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) + +/* Can be measured using dd if=/dev/xxxx of=/dev/null bs=512 count=10000.*/ +static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { + static uint8_t buf[] = + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: write\r\n"); + return; + } + + while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { +#if 1 + /* Writing in channel mode.*/ + chnWrite(&SDU1, buf, sizeof buf - 1); +#else + /* Writing in buffer mode.*/ + (void) obqGetEmptyBufferTimeout(&SDU1.obqueue, TIME_INFINITE); + memcpy(SDU1.obqueue.ptr, buf, SERIAL_USB_BUFFERS_SIZE); + obqPostFullBuffer(&SDU1.obqueue, SERIAL_USB_BUFFERS_SIZE); +#endif + } + chprintf(chp, "\r\n\nstopped\r\n"); +} + +static const ShellCommand commands[] = { + {"write", cmd_write}, + {NULL, NULL} +}; + +static const ShellConfig shell_cfg1 = { + (BaseSequentialStream *)&SDU1, + commands +}; + +/*===========================================================================*/ +/* Generic code. */ +/*===========================================================================*/ + +/* + * Red LED blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 128); +static THD_FUNCTION(Thread1, arg) { + + (void)arg; + chRegSetThreadName("blinker"); + while (true) { + systime_t time; + + time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; + palClearPad(GPIOB, GPIOB_LED); + chThdSleepMilliseconds(time); + palSetPad(GPIOB, GPIOB_LED); + chThdSleepMilliseconds(time); + } +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Initializes a serial-over-USB CDC driver. + */ + sduObjectInit(&SDU1); + sduStart(&SDU1, &serusbcfg); + + /* + * Activates the USB driver and then the USB bus pull-up on D+. + * Note, a delay is inserted in order to not have to disconnect the cable + * after a reset. + */ + usbDisconnectBus(serusbcfg.usbp); + chThdSleepMilliseconds(1500); + usbStart(serusbcfg.usbp, &usbcfg); + usbConnectBus(serusbcfg.usbp); + + /* + * Shell manager initialization. + */ + shellInit(); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Normal main() thread activity, spawning shells. + */ + while (true) { + if (SDU1.config->usbp->state == USB_ACTIVE) { + thread_t *shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE, + "shell", NORMALPRIO + 1, + shellThread, (void *)&shell_cfg1); + chThdWait(shelltp); /* Waiting termination. */ + } + chThdSleepMilliseconds(1000); + } +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/mcuconf.h new file mode 100644 index 0000000..caf4228 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/mcuconf.h @@ -0,0 +1,49 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define K20x_MCUCONF + +/* + * HAL driver system settings. + */ + +#define KINETIS_NO_INIT FALSE + +/* FEI mode - 48 MHz with internal 32.768 kHz crystal */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#define KINETIS_CLKDIV1_OUTDIV1 1 +#define KINETIS_CLKDIV1_OUTDIV2 1 +#define KINETIS_CLKDIV1_OUTDIV4 2 +#define KINETIS_BUSCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY +#define KINETIS_FLASHCLK_FREQUENCY KINETIS_SYSCLK_FREQUENCY/2 + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +/* + * USB driver settings + */ +#define KINETIS_USB_USE_USB0 TRUE + +#endif /* _MCUCONF_H_ */ \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.c b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.c new file mode 100644 index 0000000..3093640 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.c @@ -0,0 +1,329 @@ +/* + (C) 2015-2016 flabbergast + Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "hal.h" + +/* Virtual serial port over USB.*/ +SerialUSBDriver SDU1; + +/* + * Endpoints to be used for USBD1. + */ +#define USBD1_DATA_REQUEST_EP 1 +#define USBD1_DATA_AVAILABLE_EP 1 +#define USBD1_INTERRUPT_REQUEST_EP 2 + +/* + * USB Device Descriptor. + */ +static const uint8_t vcom_device_descriptor_data[18] = { + USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ + 0x02, /* bDeviceClass (CDC). */ + 0x00, /* bDeviceSubClass. */ + 0x00, /* bDeviceProtocol. */ + 0x40, /* bMaxPacketSize. */ + 0x0179, /* idVendor. */ + 0x0001, /* idProduct. */ + 0x0200, /* bcdDevice. */ + 1, /* iManufacturer. */ + 2, /* iProduct. */ + 3, /* iSerialNumber. */ + 1) /* bNumConfigurations. */ +}; + +/* + * Device Descriptor wrapper. + */ +static const USBDescriptor vcom_device_descriptor = { + sizeof vcom_device_descriptor_data, + vcom_device_descriptor_data +}; + +/* Configuration Descriptor tree for a CDC.*/ +static const uint8_t vcom_configuration_descriptor_data[67] = { + /* Configuration Descriptor.*/ + USB_DESC_CONFIGURATION(67, /* wTotalLength. */ + 0x02, /* bNumInterfaces. */ + 0x01, /* bConfigurationValue. */ + 0, /* iConfiguration. */ + 0xC0, /* bmAttributes (self powered). */ + 50), /* bMaxPower (100mA). */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x01, /* bNumEndpoints. */ + 0x02, /* bInterfaceClass (Communications + Interface Class, CDC section + 4.2). */ + 0x02, /* bInterfaceSubClass (Abstract + Control Model, CDC section 4.3). */ + 0x01, /* bInterfaceProtocol (AT commands, + CDC section 4.4). */ + 0), /* iInterface. */ + /* Header Functional Descriptor (CDC section 5.2.3).*/ + USB_DESC_BYTE (5), /* bLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header + Functional Descriptor. */ + USB_DESC_BCD (0x0110), /* bcdCDC. */ + /* Call Management Functional Descriptor. */ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ + USB_DESC_BYTE (0x01), /* bDataInterface. */ + /* ACM Functional Descriptor.*/ + USB_DESC_BYTE (4), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract + Control Management Descriptor). */ + USB_DESC_BYTE (0x02), /* bmCapabilities. */ + /* Union Functional Descriptor.*/ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bMasterInterface (Communication + Class Interface). */ + USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class + Interface). */ + /* Endpoint 2 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, + 0x03, /* bmAttributes (Interrupt). */ + 0x0008, /* wMaxPacketSize. */ + 0xFF), /* bInterval. */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x02, /* bNumEndpoints. */ + 0x0A, /* bInterfaceClass (Data Class + Interface, CDC section 4.5). */ + 0x00, /* bInterfaceSubClass (CDC section + 4.6). */ + 0x00, /* bInterfaceProtocol (CDC section + 4.7). */ + 0x00), /* iInterface. */ + /* Endpoint 1 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00), /* bInterval. */ + /* Endpoint 1 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00) /* bInterval. */ +}; + +/* + * Configuration Descriptor wrapper. + */ +static const USBDescriptor vcom_configuration_descriptor = { + sizeof vcom_configuration_descriptor_data, + vcom_configuration_descriptor_data +}; + +/* + * U.S. English language identifier. + */ +static const uint8_t vcom_string0[] = { + USB_DESC_BYTE(4), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ +}; + +/* + * Vendor string. + */ +static const uint8_t vcom_string1[] = { + USB_DESC_BYTE(2+2*7), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'N', 0, 'o', 0, 'p', 0, 'e', 0, 'L', 0, 'a', 0, 'b', 0, +}; + +/* + * Device Description string. + */ +static const uint8_t vcom_string2[] = { + USB_DESC_BYTE(2+5*2), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'C', 0, 'h', 0, 'T', 0, 's', 0, 'y', 0, +}; + +/* + * Serial Number string. + */ +static const uint8_t vcom_string3[] = { + USB_DESC_BYTE(8), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + '0' + CH_KERNEL_MAJOR, 0, + '0' + CH_KERNEL_MINOR, 0, + '0' + CH_KERNEL_PATCH, 0 +}; + +/* + * Strings wrappers array. + */ +static const USBDescriptor vcom_strings[] = { + {sizeof vcom_string0, vcom_string0}, + {sizeof vcom_string1, vcom_string1}, + {sizeof vcom_string2, vcom_string2}, + {sizeof vcom_string3, vcom_string3} +}; + +/* + * Handles the GET_DESCRIPTOR callback. All required descriptors must be + * handled here. + */ +static const USBDescriptor *get_descriptor(USBDriver *usbp, + uint8_t dtype, + uint8_t dindex, + uint16_t lang) { + (void)usbp; + (void)lang; + switch (dtype) { + case USB_DESCRIPTOR_DEVICE: + return &vcom_device_descriptor; + case USB_DESCRIPTOR_CONFIGURATION: + return &vcom_configuration_descriptor; + case USB_DESCRIPTOR_STRING: + if (dindex < 4) + return &vcom_strings[dindex]; + } + return NULL; +} + +/** + * @brief IN EP1 state. + */ +static USBInEndpointState ep1instate; + +/** + * @brief OUT EP1 state. + */ +static USBOutEndpointState ep1outstate; + +/** + * @brief EP1 initialization structure (both IN and OUT). + */ +static const USBEndpointConfig ep1config = { + USB_EP_MODE_TYPE_BULK, + NULL, + sduDataTransmitted, + sduDataReceived, + 0x0040, + 0x0040, + &ep1instate, + &ep1outstate, + 2, + NULL +}; + +/** + * @brief IN EP2 state. + */ +static USBInEndpointState ep2instate; + +/** + * @brief EP2 initialization structure (IN only). + */ +static const USBEndpointConfig ep2config = { + USB_EP_MODE_TYPE_INTR, + NULL, + sduInterruptTransmitted, + NULL, + 0x0010, + 0x0000, + &ep2instate, + NULL, + 1, + NULL +}; + +/* + * Handles the USB driver global events. + */ +static void usb_event(USBDriver *usbp, usbevent_t event) { + extern SerialUSBDriver SDU1; + + switch (event) { + case USB_EVENT_RESET: + return; + case USB_EVENT_ADDRESS: + return; + case USB_EVENT_CONFIGURED: + chSysLockFromISR(); + + /* Enables the endpoints specified into the configuration. + Note, this callback is invoked from an ISR so I-Class functions + must be used.*/ + usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); + usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); + + /* Resetting the state of the CDC subsystem.*/ + sduConfigureHookI(&SDU1); + + chSysUnlockFromISR(); + return; + case USB_EVENT_SUSPEND: + chSysLockFromISR(); + + /* Disconnection event on suspend.*/ + sduDisconnectI(&SDU1); + + chSysUnlockFromISR(); + return; + case USB_EVENT_WAKEUP: + return; + case USB_EVENT_STALLED: + return; + } + return; +} + +/* + * Handles the USB driver global events. + */ +static void sof_handler(USBDriver *usbp) { + + (void)usbp; + + osalSysLockFromISR(); + sduSOFHookI(&SDU1); + osalSysUnlockFromISR(); +} + +/* + * USB driver configuration. + */ +const USBConfig usbcfg = { + usb_event, + get_descriptor, + sduRequestsHook, + sof_handler +}; + +/* + * Serial over USB driver configuration. + */ +const SerialUSBConfig serusbcfg = { + &USBD1, + USBD1_DATA_REQUEST_EP, + USBD1_DATA_AVAILABLE_EP, + USBD1_INTERRUPT_REQUEST_EP +}; diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.h b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.h new file mode 100644 index 0000000..5aa501e --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/MCHCK/USB_SERIAL/usbcfg.h @@ -0,0 +1,27 @@ +/* + (C) 2015-2016 flabbergast + Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _USBCFG_H_ +#define _USBCFG_H_ + +extern const USBConfig usbcfg; +extern SerialUSBConfig serusbcfg; +extern SerialUSBDriver SDU1; + +#endif /* _USBCFG_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/Makefile new file mode 100644 index 0000000..6510052 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/Makefile @@ -0,0 +1,219 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3_1/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MK20DX256.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/chconf.h new file mode 100644 index 0000000..caae0c2 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/chconf.h @@ -0,0 +1,514 @@ +/* + ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file TEENSY3_x/ADC/chconf.h + * @brief Configuration file. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/halconf.h new file mode 100644 index 0000000..ebc0331 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/halconf.h @@ -0,0 +1,353 @@ +/* + ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file TEENSY3_x/ADC/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC TRUE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/main.c new file mode 100644 index 0000000..7a2dc3a --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/main.c @@ -0,0 +1,135 @@ +/* + ChibiOS - Copyright (C) 2015 RedoX https://github.com/RedoXyde + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ +#include "hal.h" + +#define ADC_GRP1_NUM_CHANNELS 2 +#define ADC_GRP1_BUF_DEPTH 1 + +static adcsample_t samples1[ADC_GRP1_NUM_CHANNELS * ADC_GRP1_BUF_DEPTH]; +static virtual_timer_t vt; + +static void ledoff(void *p) { + + (void)p; + palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); +} + +static void adc_end_cb(ADCDriver *adcp, adcsample_t *buffer, size_t n) { + + (void)adcp; + (void)n; + + /* + * The bandgap value represents the ADC reading for 1.0V + */ + uint16_t sensor = buffer[0]; + uint16_t bandgap = buffer[1]; + + /* + * The v25 value is the voltage reading at 25C, it comes from the ADC + * electricals table in the processor manual. V25 is in millivolts. + */ + int32_t v25 = 716; + + /* + * The m value is slope of the temperature sensor values, again from + * the ADC electricals table in the processor manual. + * M in microvolts per degree. + */ + int32_t m = 1620; + + /* + * Divide the temperature sensor reading by the bandgap to get + * the voltage for the ambient temperature in millivolts. + */ + int32_t vamb = (sensor * 1000) / bandgap; + + /* + * This formula comes from the reference manual. + * Temperature is in millidegrees C. + */ + int32_t delta = (((vamb - v25) * 1000000) / m); + int32_t temp = 25000 - delta; + + palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); + chSysLockFromISR(); + chVTResetI(&vt); + if (temp < 19000) { + chVTSetI(&vt, MS2ST(10), ledoff, NULL); + } else if (temp > 28000) { + chVTSetI(&vt, MS2ST(20), ledoff, NULL); + } else { + chVTSetI(&vt, MS2ST(40), ledoff, NULL); + } + chSysUnlockFromISR(); +} + + +/* + * ADC conversion group. + * Mode: Linear buffer, 8 samples of 1 channel, SW triggered. + */ +static const ADCConversionGroup adcgrpcfg1 = { + false, + ADC_GRP1_NUM_CHANNELS, + adc_end_cb, + NULL, + ADC_TEMP_SENSOR | ADC_BANDGAP, + /* CFG1 Regiser - ADCCLK = SYSCLK / 16, 16 bits per sample */ + ADCx_CFG1_ADIV(ADCx_CFG1_ADIV_DIV_8) | + ADCx_CFG1_ADICLK(ADCx_CFG1_ADIVCLK_BUS_CLOCK_DIV_2) | + ADCx_CFG1_MODE(ADCx_CFG1_MODE_16_BITS), + /* SC3 Register - Average 32 readings per sample */ + ADCx_SC3_AVGE | + ADCx_SC3_AVGS(ADCx_SC3_AVGS_AVERAGE_32_SAMPLES) +}; + +static const ADCConfig adccfg1 = { + /* Perform initial calibration */ + true +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the ADC1 driver. + */ + adcStart(&ADCD1, &adccfg1); + + while (!chThdShouldTerminateX()) { + /* + * ADC linear conversion. + */ + adcConvert(&ADCD1, &adcgrpcfg1, samples1, ADC_GRP1_BUF_DEPTH); + + chThdSleepMilliseconds(1000); + } + + return 0; +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/mcuconf.h new file mode 100644 index 0000000..eefa840 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/ADC/mcuconf.h @@ -0,0 +1,35 @@ +/* + ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define K20x_MCUCONF + +/* + * HAL driver system settings. + */ +/* PEE mode - 48MHz system clock driven by external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL + +/* + * ADC driver system settings. + */ +#define KINETIS_ADC_USE_ADC0 TRUE + +#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile new file mode 100644 index 0000000..fa5084c --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile @@ -0,0 +1,219 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3_1/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MK20DX256.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + eeprom.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile.3_0 b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile.3_0 new file mode 100644 index 0000000..78fe392 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/Makefile.3_0 @@ -0,0 +1,219 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MK20DX128.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + eeprom.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/README.md b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/README.md new file mode 100644 index 0000000..7f01bac --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/README.md @@ -0,0 +1,8 @@ +# Teensy 3.0 EEPROM via FlexRAM example + +FlexRAM, which is present on K20x MCUs, is configured to EEPROM mode, so it behaves like EEPROM. The maximum available size is 2K, but explicitly using a smaller chunk enables wear-levelling and increases write endurance. + + +## Credits + +Most of the actual EEPROM code is from [PJRC/Teensyduino](https://www.pjrc.com/teensy/teensyduino.html). \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/chconf.h new file mode 100644 index 0000000..ea87df8 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/chconf.h @@ -0,0 +1,516 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file TEENSY3_x/EEPROM_EMU/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY TRUE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/eeprom.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/eeprom.c new file mode 100644 index 0000000..c78b39f --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/eeprom.c @@ -0,0 +1,300 @@ +/* + * Eeprom emulation for K20x chips. + * (c) 2015 flabbergast + * Most of the code is from PJRC/Teensyduino (license below) + */ + +/* Teensyduino Core Library + * http://www.pjrc.com/teensy/ + * Copyright (c) 2013 PJRC.COM, LLC. + * + * Permission is hereby granted, free of charge, to any person obtaining + * a copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sublicense, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * 1. The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * 2. If the Software is incorporated into a build system that allows + * selection among a list of target devices, then similar target + * devices manufactured by PJRC.COM must be included in the list of + * target devices and selectable in the same manner. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include "ch.h" +#include "hal.h" + +// The EEPROM is really RAM with a hardware-based backup system to +// flash memory. Selecting a smaller size EEPROM allows more wear +// leveling, for higher write endurance. If you edit this file, +// set this to the smallest size your application can use. Also, +// due to Freescale's implementation, writing 16 or 32 bit words +// (aligned to 2 or 4 byte boundaries) has twice the endurance +// compared to writing 8 bit bytes. +// +#define EEPROM_SIZE 32 + +// Writing unaligned 16 or 32 bit data is handled automatically when +// this is defined, but at a cost of extra code size. Without this, +// any unaligned write will cause a hard fault exception! If you're +// absolutely sure all 16 and 32 bit writes will be aligned, you can +// remove the extra unnecessary code. +// +#define HANDLE_UNALIGNED_WRITES + +// Minimum EEPROM Endurance +// ------------------------ +#if (EEPROM_SIZE == 2048) // 35000 writes/byte or 70000 writes/word + #define EEESIZE 0x33 +#elif (EEPROM_SIZE == 1024) // 75000 writes/byte or 150000 writes/word + #define EEESIZE 0x34 +#elif (EEPROM_SIZE == 512) // 155000 writes/byte or 310000 writes/word + #define EEESIZE 0x35 +#elif (EEPROM_SIZE == 256) // 315000 writes/byte or 630000 writes/word + #define EEESIZE 0x36 +#elif (EEPROM_SIZE == 128) // 635000 writes/byte or 1270000 writes/word + #define EEESIZE 0x37 +#elif (EEPROM_SIZE == 64) // 1275000 writes/byte or 2550000 writes/word + #define EEESIZE 0x38 +#elif (EEPROM_SIZE == 32) // 2555000 writes/byte or 5110000 writes/word + #define EEESIZE 0x39 +#endif + +void eeprom_initialize(void) +{ + uint32_t count=0; + uint16_t do_flash_cmd[] = { + 0xf06f, 0x037f, 0x7003, 0x7803, + 0xf013, 0x0f80, 0xd0fb, 0x4770}; + uint8_t status; + + if (FTFL->FCNFG & FTFL_FCNFG_RAMRDY) { + // FlexRAM is configured as traditional RAM + // We need to reconfigure for EEPROM usage + FTFL->FCCOB0 = 0x80; // PGMPART = Program Partition Command + FTFL->FCCOB4 = EEESIZE; // EEPROM Size + FTFL->FCCOB5 = 0x03; // 0K for Dataflash, 32K for EEPROM backup + __disable_irq(); + // do_flash_cmd() must execute from RAM. Luckily the C syntax is simple... + (*((void (*)(volatile uint8_t *))((uint32_t)do_flash_cmd | 1)))(&(FTFL->FSTAT)); + __enable_irq(); + status = FTFL->FSTAT; + if (status & (FTFL_FSTAT_RDCOLERR|FTFL_FSTAT_ACCERR|FTFL_FSTAT_FPVIOL)) { + FTFL->FSTAT = (status & (FTFL_FSTAT_RDCOLERR|FTFL_FSTAT_ACCERR|FTFL_FSTAT_FPVIOL)); + return; // error + } + } + // wait for eeprom to become ready (is this really necessary?) + while (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) { + if (++count > 20000) break; + } +} + +#define FlexRAM ((uint8_t *)0x14000000) + +uint8_t eeprom_read_byte(const uint8_t *addr) +{ + uint32_t offset = (uint32_t)addr; + if (offset >= EEPROM_SIZE) return 0; + if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); + return FlexRAM[offset]; +} + +uint16_t eeprom_read_word(const uint16_t *addr) +{ + uint32_t offset = (uint32_t)addr; + if (offset >= EEPROM_SIZE-1) return 0; + if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); + return *(uint16_t *)(&FlexRAM[offset]); +} + +uint32_t eeprom_read_dword(const uint32_t *addr) +{ + uint32_t offset = (uint32_t)addr; + if (offset >= EEPROM_SIZE-3) return 0; + if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); + return *(uint32_t *)(&FlexRAM[offset]); +} + +void eeprom_read_block(void *buf, const void *addr, uint32_t len) +{ + uint32_t offset = (uint32_t)addr; + uint8_t *dest = (uint8_t *)buf; + uint32_t end = offset + len; + + if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); + if (end > EEPROM_SIZE) end = EEPROM_SIZE; + while (offset < end) { + *dest++ = FlexRAM[offset++]; + } +} + +int eeprom_is_ready(void) +{ + return (FTFL->FCNFG & FTFL_FCNFG_EEERDY) ? 1 : 0; +} + +static void flexram_wait(void) +{ + while (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) { + // TODO: timeout + } +} + +void eeprom_write_byte(uint8_t *addr, uint8_t value) +{ + uint32_t offset = (uint32_t)addr; + + if (offset >= EEPROM_SIZE) return; + if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); + if (FlexRAM[offset] != value) { + FlexRAM[offset] = value; + flexram_wait(); + } +} + +void eeprom_write_word(uint16_t *addr, uint16_t value) +{ + uint32_t offset = (uint32_t)addr; + + if (offset >= EEPROM_SIZE-1) return; + if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); +#ifdef HANDLE_UNALIGNED_WRITES + if ((offset & 1) == 0) { +#endif + if (*(uint16_t *)(&FlexRAM[offset]) != value) { + *(uint16_t *)(&FlexRAM[offset]) = value; + flexram_wait(); + } +#ifdef HANDLE_UNALIGNED_WRITES + } else { + if (FlexRAM[offset] != value) { + FlexRAM[offset] = value; + flexram_wait(); + } + if (FlexRAM[offset + 1] != (value >> 8)) { + FlexRAM[offset + 1] = value >> 8; + flexram_wait(); + } + } +#endif +} + +void eeprom_write_dword(uint32_t *addr, uint32_t value) +{ + uint32_t offset = (uint32_t)addr; + + if (offset >= EEPROM_SIZE-3) return; + if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); +#ifdef HANDLE_UNALIGNED_WRITES + switch (offset & 3) { + case 0: +#endif + if (*(uint32_t *)(&FlexRAM[offset]) != value) { + *(uint32_t *)(&FlexRAM[offset]) = value; + flexram_wait(); + } + return; +#ifdef HANDLE_UNALIGNED_WRITES + case 2: + if (*(uint16_t *)(&FlexRAM[offset]) != value) { + *(uint16_t *)(&FlexRAM[offset]) = value; + flexram_wait(); + } + if (*(uint16_t *)(&FlexRAM[offset + 2]) != (value >> 16)) { + *(uint16_t *)(&FlexRAM[offset + 2]) = value >> 16; + flexram_wait(); + } + return; + default: + if (FlexRAM[offset] != value) { + FlexRAM[offset] = value; + flexram_wait(); + } + if (*(uint16_t *)(&FlexRAM[offset + 1]) != (value >> 8)) { + *(uint16_t *)(&FlexRAM[offset + 1]) = value >> 8; + flexram_wait(); + } + if (FlexRAM[offset + 3] != (value >> 24)) { + FlexRAM[offset + 3] = value >> 24; + flexram_wait(); + } + } +#endif +} + +void eeprom_write_block(const void *buf, void *addr, uint32_t len) +{ + uint32_t offset = (uint32_t)addr; + const uint8_t *src = (const uint8_t *)buf; + + if (offset >= EEPROM_SIZE) return; + if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); + if (len >= EEPROM_SIZE) len = EEPROM_SIZE; + if (offset + len >= EEPROM_SIZE) len = EEPROM_SIZE - offset; + while (len > 0) { + uint32_t lsb = offset & 3; + if (lsb == 0 && len >= 4) { + // write aligned 32 bits + uint32_t val32; + val32 = *src++; + val32 |= (*src++ << 8); + val32 |= (*src++ << 16); + val32 |= (*src++ << 24); + if (*(uint32_t *)(&FlexRAM[offset]) != val32) { + *(uint32_t *)(&FlexRAM[offset]) = val32; + flexram_wait(); + } + offset += 4; + len -= 4; + } else if ((lsb == 0 || lsb == 2) && len >= 2) { + // write aligned 16 bits + uint16_t val16; + val16 = *src++; + val16 |= (*src++ << 8); + if (*(uint16_t *)(&FlexRAM[offset]) != val16) { + *(uint16_t *)(&FlexRAM[offset]) = val16; + flexram_wait(); + } + offset += 2; + len -= 2; + } else { + // write 8 bits + uint8_t val8 = *src++; + if (FlexRAM[offset] != val8) { + FlexRAM[offset] = val8; + flexram_wait(); + } + offset++; + len--; + } + } +} + +/* +void do_flash_cmd(volatile uint8_t *fstat) +{ + *fstat = 0x80; + while ((*fstat & 0x80) == 0) ; // wait +} +00000000 : + 0: f06f 037f mvn.w r3, #127 ; 0x7f + 4: 7003 strb r3, [r0, #0] + 6: 7803 ldrb r3, [r0, #0] + 8: f013 0f80 tst.w r3, #128 ; 0x80 + c: d0fb beq.n 6 + e: 4770 bx lr +*/ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/eeprom.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/eeprom.h new file mode 100644 index 0000000..1bd714e --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/eeprom.h @@ -0,0 +1,21 @@ +/* + * Eeprom emulation for K20x chips. + * (c) 2015 flabbergast + * Most of the code is from PJRC/Teensyduino (license in eeprom.c) + */ + +#ifndef _EEPROM_H_ +#define _EEPROM_H_ + +void eeprom_initialize(void); +int eeprom_is_ready(void); +uint8_t eeprom_read_byte(const uint8_t *addr); +uint16_t eeprom_read_word(const uint16_t *addr); +uint32_t eeprom_read_dword(const uint32_t *addr); +void eeprom_read_block(void *buf, const void *addr, uint32_t len); +void eeprom_write_byte(uint8_t *addr, uint8_t data); +void eeprom_write_word(uint16_t *addr, uint16_t value); +void eeprom_write_dword(uint32_t *addr, uint32_t value); +void eeprom_write_block(const void *buf, void *addr, uint32_t len); + +#endif /* _EEPROM_H_ */ \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/halconf.h new file mode 100644 index 0000000..5cc1b57 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/halconf.h @@ -0,0 +1,187 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file TEENSY3_x/EEPROM_EMU/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/main.c new file mode 100644 index 0000000..e1ef889 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EEPROM_EMU/main.c @@ -0,0 +1,77 @@ +/* + (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ +#include "hal.h" + +#include "eeprom.h" + +#define LED_GPIO TEENSY_PIN13_IOPORT +#define LED_PIN TEENSY_PIN13 + +uint8_t n_of_blinks; + +static THD_WORKING_AREA(waBlinkThread, 128); +static THD_FUNCTION(BlinkThread, arg) { + (void)arg; + uint8_t i; + + for(i=0; i + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define K20x_MCUCONF + +/* + * HAL driver system settings. + */ +#if 1 +/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL +#endif + +#if 0 +/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ +#endif + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +/* + * USB driver settings + */ +#define KINETIS_USB_USE_USB0 TRUE + +#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/Makefile new file mode 100644 index 0000000..6510052 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/Makefile @@ -0,0 +1,219 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3_1/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MK20DX256.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/chconf.h new file mode 100644 index 0000000..0389bed --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/chconf.h @@ -0,0 +1,514 @@ +/* + ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file TEENSY3_x/EXT/chconf.h + * @brief Configuration file. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/halconf.h new file mode 100644 index 0000000..eba8b32 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/halconf.h @@ -0,0 +1,353 @@ +/* + ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file TEENSY3_x/EXT/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT TRUE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/main.c new file mode 100644 index 0000000..3903897 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/main.c @@ -0,0 +1,74 @@ +/* + ChibiOS - Copyright (C) 2015 RedoX https://github.com/RedoXyde + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ +#include "hal.h" + +static void ledoff(void *p) { + + (void)p; + palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); +} + +static virtual_timer_t vt; + +/* Triggered when the Teensy's pin 12 (PC7) changes; The LED is set to ON.*/ +static void extcb1(EXTDriver *extp, expchannel_t channel) { + (void)extp; + (void)channel; + palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); + chSysLockFromISR(); + chVTResetI(&vt); + /* LED set to OFF after 500mS.*/ + chVTSetI(&vt, MS2ST(500), ledoff, NULL); + chSysUnlockFromISR(); +} + +static const EXTConfig extcfg = { + { + {EXT_CH_MODE_BOTH_EDGES|EXT_CH_MODE_AUTOSTART, extcb1, PORTC, 7} + } +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the EXT driver 1. + */ + extStart(&EXTD1, &extcfg); + /* + * Normal main() thread activity, in this demo it enables and disables the + * button EXT channel using 10 seconds intervals. + */ + while (!chThdShouldTerminateX()) { + extChannelDisable(&EXTD1, 0); + chThdSleepMilliseconds(10000); + extChannelEnable(&EXTD1, 0); + chThdSleepMilliseconds(10000); + } + return 0; +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/mcuconf.h new file mode 100644 index 0000000..147622e --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/EXT/mcuconf.h @@ -0,0 +1,47 @@ +/* + ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define K20x_MCUCONF + +/* + * HAL driver system settings. + */ +/* PEE mode - 48MHz system clock driven by external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL + +/* + * EXT driver system settings. + */ +#define KINETIS_EXTI_NUM_CHANNELS 1 +#define KINETIS_EXT_PORTA_IRQ_PRIORITY 12 +#define KINETIS_EXT_PORTB_IRQ_PRIORITY 12 +#define KINETIS_EXT_PORTC_IRQ_PRIORITY 12 +#define KINETIS_EXT_PORTD_IRQ_PRIORITY 12 +#define KINETIS_EXT_PORTE_IRQ_PRIORITY 12 + +/* K20 64pin */ +#define KINETIS_EXT_PORTA_WIDTH 20 +#define KINETIS_EXT_PORTB_WIDTH 20 +#define KINETIS_EXT_PORTC_WIDTH 12 +#define KINETIS_EXT_PORTD_WIDTH 8 +#define KINETIS_EXT_PORTE_WIDTH 2 + +#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/Makefile new file mode 100644 index 0000000..6510052 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/Makefile @@ -0,0 +1,219 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3_1/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MK20DX256.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/chconf.h new file mode 100644 index 0000000..b2ed194 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/chconf.h @@ -0,0 +1,514 @@ +/* + ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file TEENSY3_x/GPT/chconf.h + * @brief Configuration file. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/halconf.h new file mode 100644 index 0000000..80de20c --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/halconf.h @@ -0,0 +1,353 @@ +/* + ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file TEENSY3_x/GPT/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT TRUE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/main.c new file mode 100644 index 0000000..4609f37 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/main.c @@ -0,0 +1,65 @@ +/* + ChibiOS - Copyright (C) 2015 RedoX https://github.com/RedoXyde + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ +#include "hal.h" + +/* + * GPT1 callback. + */ +static void gpt1cb(GPTDriver *gptp) { + + (void)gptp; + palTogglePad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); +} + +static const GPTConfig gpt1cfg = { + 10000, /* 10kHz timer clock.*/ + gpt1cb /* Timer callback.*/ +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates the GPT driver 1. + */ + gptStart(&GPTD1, &gpt1cfg); + gptStartContinuous(&GPTD1, 5000); /* 500ms */ + //~ gptPolledDelay(&GPTD1, 10); /* Small delay.*/ + + /* + * Normal main() thread activity, it changes the GPT1 period every + * five seconds. + */ + while (!chThdShouldTerminateX()) { + chThdSleepMilliseconds(5000); + gptChangeInterval(&GPTD1,gptGetIntervalX(&GPTD1)/2); /* 25ms */ + chThdSleepMilliseconds(5000); + gptChangeInterval(&GPTD1,gptGetIntervalX(&GPTD1)*2); /* 50ms */ + } + return 0; +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/mcuconf.h new file mode 100644 index 0000000..bb2f8bf --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/GPT/mcuconf.h @@ -0,0 +1,35 @@ +/* + ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define K20x_MCUCONF + +/* + * HAL driver system settings. + */ +/* PEE mode - 48MHz system clock driven by external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL + +/* + * GPT driver system settings. + */ +#define KINETIS_GPT_USE_PIT0 TRUE + +#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/Makefile new file mode 100644 index 0000000..6510052 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/Makefile @@ -0,0 +1,219 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3_1/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MK20DX256.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/chconf.h new file mode 100644 index 0000000..dda26e1 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/chconf.h @@ -0,0 +1,516 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file TEENSY3_x/PWM/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/halconf.h new file mode 100644 index 0000000..9cb0ac9 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/halconf.h @@ -0,0 +1,353 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file TEENSY3_x/PWM/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/main.c new file mode 100644 index 0000000..bef46a2 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/main.c @@ -0,0 +1,116 @@ +/* + (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ +#include "hal.h" + +#define PWM_DRIVER PWMD1 + +static void pwmpcb(PWMDriver *pwmp) { + (void)pwmp; + palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); +} + +static void pwmc0cb(PWMDriver *pwmp) { + (void)pwmp; + palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); +} + +static PWMConfig pwmcfg = { + 24000000, /* 24MHz PWM clock frequency. */ + 12000, /* Initial PWM period 1ms */ + pwmpcb, + { + {PWM_OUTPUT_DISABLED, pwmc0cb}, + {PWM_OUTPUT_DISABLED, NULL}, + }, +}; + +/* Breathing Sleep LED brighness(PWM On period) table + * + * http://www.wolframalpha.com/input/?i=%28sin%28+x%2F64*pi%29**8+*+255%2C+x%3D0+to+63 + * (0..63).each {|x| p ((sin(x/64.0*PI)**8)*255).to_i } + */ +/* ruby -e "a = ((0..255).map{|x| Math.exp(Math.cos(Math::PI+(2*x*(Math::PI)/255)))-Math.exp(-1) }); m = a.max; a.map\!{|x| (9900*x/m).to_i+1}; p a" */ +#define BREATHE_STEP 16 /* ms; = 4000ms/TABLE_SIZE */ +#define TABLE_SIZE 256 +static const uint16_t breathing_table[TABLE_SIZE] = { + 1, 1, 2, 5, 8, 12, 17, 24, 31, 39, 48, 58, 69, 81, 95, 109, 124, 140, 158, 177, 196, 217, 239, 263, 287, 313, 340, 369, 399, 430, 463, 497, 532, 570, 608, 649, 691, 734, 779, 827, 875, 926, 979, 1033, 1090, 1148, 1209, 1271, 1336, 1403, 1472, 1543, 1617, 1693, 1771, 1852, 1935, 2021, 2109, 2199, 2292, 2387, 2486, 2586, 2689, 2795, 2903, 3014, 3127, 3243, 3362, 3482, 3606, 3731, 3859, 3989, 4122, 4256, 4392, 4531, 4671, 4813, 4957, 5102, 5248, 5396, 5545, 5694, 5845, 5995, 6147, 6298, 6449, 6600, 6751, 6901, 7050, 7198, 7344, 7489, 7632, 7772, 7911, 8046, 8179, 8309, 8435, 8557, 8676, 8790, 8900, 9005, 9105, 9201, 9291, 9375, 9454, 9527, 9593, 9654, 9708, 9756, 9797, 9831, 9859, 9880, 9894, 9900, 9901, 9894, 9880, 9859, 9831, 9797, 9756, 9708, 9654, 9593, 9527, 9454, 9375, 9291, 9201, 9105, 9005, 8900, 8790, 8676, 8557, 8435, 8309, 8179, 8046, 7911, 7772, 7632, 7489, 7344, 7198, 7050, 6901, 6751, 6600, 6449, 6298, 6147, 5995, 5845, 5694, 5545, 5396, 5248, 5102, 4957, 4813, 4671, 4531, 4392, 4256, 4122, 3989, 3859, 3731, 3606, 3482, 3362, 3243, 3127, 3014, 2903, 2795, 2689, 2586, 2486, 2387, 2292, 2199, 2109, 2021, 1935, 1852, 1771, 1693, 1617, 1543, 1472, 1403, 1336, 1271, 1209, 1148, 1090, 1033, 979, 926, 875, 827, 779, 734, 691, 649, 608, 570, 532, 497, 463, 430, 399, 369, 340, 313, 287, 263, 239, 217, 196, 177, 158, 140, 124, 109, 95, 81, 69, 58, 48, 39, 31, 24, 17, 12, 8, 5, 2, 1, 1 +}; + +uint16_t table_pos = 0; + +static THD_WORKING_AREA(waBreatheThread, 128); +static THD_FUNCTION(BreatheThread, arg) { + (void)arg; + chRegSetThreadName("breatheThread"); + + while(!chThdShouldTerminateX()) { + pwmEnableChannel(&PWM_DRIVER, 0, PWM_PERCENTAGE_TO_WIDTH(&PWM_DRIVER,breathing_table[table_pos])); + table_pos = (table_pos+1) % TABLE_SIZE; + chThdSleepMilliseconds(BREATHE_STEP); + } +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Initialize the PWM driver. + */ + pwmStart(&PWM_DRIVER, &pwmcfg); + pwmEnablePeriodicNotification(&PWM_DRIVER); + + /* + * Starts the PWM channel 0; turn the LED off. + */ + pwmEnableChannel(&PWM_DRIVER, 0, PWM_PERCENTAGE_TO_WIDTH(&PWM_DRIVER, 0)); + pwmEnableChannelNotification(&PWM_DRIVER, 0); // MUST be before EnableChannel... + + /* + * Create the breathe thread. + */ + thread_t *breathe_thread_p; + breathe_thread_p = chThdCreateStatic(waBreatheThread, sizeof(waBreatheThread), NORMALPRIO, BreatheThread, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (!chThdShouldTerminateX()) { + chThdSleepMilliseconds(500); + } + + chThdTerminate(breathe_thread_p); + chThdSleepMilliseconds(2*BREATHE_STEP); + + /* + * Disables channel 0 and stops the drivers. + */ + pwmDisableChannel(&PWM_DRIVER, 0); + pwmStop(&PWM_DRIVER); + + return 0; +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/mcuconf.h new file mode 100644 index 0000000..9f087dd --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/PWM/mcuconf.h @@ -0,0 +1,35 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define K20x_MCUCONF + +/* + * HAL driver system settings. + */ +/* PEE mode - 48MHz system clock driven by external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL + +/* + * PWM driver system settings. + */ +#define KINETIS_PWM_USE_FTM0 TRUE + +#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/Makefile new file mode 100644 index 0000000..6510052 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/Makefile @@ -0,0 +1,219 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3_1/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MK20DX256.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/Makefile.3_0 b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/Makefile.3_0 new file mode 100644 index 0000000..5e0f4a6 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/Makefile.3_0 @@ -0,0 +1,219 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MK20DX128.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/chconf.h new file mode 100644 index 0000000..95b505a --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/chconf.h @@ -0,0 +1,514 @@ +/* + ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file TEENSY3_x/SERIAL/chconf.h + * @brief Configuration file. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/halconf.h new file mode 100644 index 0000000..6c7a97d --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/halconf.h @@ -0,0 +1,353 @@ +/* + ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file TEENSY3_x/SERIAL/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/main.c new file mode 100644 index 0000000..722a398 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/main.c @@ -0,0 +1,81 @@ +/* + ChibiOS - Copyright (C) 2015 RedoX https://github.com/RedoXyde + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ +#include "hal.h" + +static THD_WORKING_AREA(waSerEcho, 128); +static THD_FUNCTION(thSerEcho, arg) +{ + (void)arg; + chRegSetThreadName("SerEcho"); + event_listener_t elSerData; + eventflags_t flags; + chEvtRegisterMask((event_source_t *)chnGetEventSource(&SD1), &elSerData, EVENT_MASK(1)); + + while (!chThdShouldTerminateX()) + { + chEvtWaitOneTimeout(EVENT_MASK(1), MS2ST(10)); + flags = chEvtGetAndClearFlags(&elSerData); + if (flags & CHN_INPUT_AVAILABLE) + { + msg_t charbuf; + do + { + charbuf = chnGetTimeout(&SD1, TIME_IMMEDIATE); + if ( charbuf != Q_TIMEOUT ) + { + streamPut(&SD1, charbuf); + } + } + while (charbuf != Q_TIMEOUT); + } + } +} + +SerialConfig s0cfg = +{ + 19200 +}; + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Activates serial 1 (UART0) using the driver default configuration. + */ + sdStart(&SD1, &s0cfg); + + chThdCreateStatic(waSerEcho, sizeof(waSerEcho), NORMALPRIO, thSerEcho, NULL); + + while (!chThdShouldTerminateX()) { + chThdSleepMilliseconds(1000); + palTogglePad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); + sdPut(&SD1,'B'); + } + + return 0; +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/mcuconf.h new file mode 100644 index 0000000..919719b --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/SERIAL/mcuconf.h @@ -0,0 +1,35 @@ +/* + ChibiOS - (C) 2015 RedoX https://github.com/RedoXyde + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define K20x_MCUCONF + +/* + * HAL driver system settings. + */ +/* PEE mode - 48MHz system clock driven by external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile new file mode 100644 index 0000000..055c3dc --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile @@ -0,0 +1,225 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x7.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3_1/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). +include $(CHIBIOS)/test/rt/test.mk +include $(CHIBIOS)/os/hal/lib/streams/streams.mk +include $(CHIBIOS)/os/various/shell/shell.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MK20DX256.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + $(STREAMSSRC) \ + $(SHELLSRC) \ + usbcfg.c \ + main.c \ + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(STREAMSINC) $(SHELLINC) + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile.3_0 b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile.3_0 new file mode 100644 index 0000000..3135d7c --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/Makefile.3_0 @@ -0,0 +1,225 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O2 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# Enables the use of FPU on Cortex-M4 (no, softfp, hard). +ifeq ($(USE_FPU),) + USE_FPU = no +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_k20x5.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/K20x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_3/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v7m.mk +# Other files (optional). +include $(CHIBIOS)/test/rt/test.mk +include $(CHIBIOS)/os/hal/lib/streams/streams.mk +include $(CHIBIOS)/os/various/shell/shell.mk + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MK20DX128.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(TESTSRC) \ + $(STREAMSSRC) \ + $(SHELLSRC) \ + usbcfg.c \ + main.c \ + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) $(TESTINC) \ + $(STREAMSINC) $(SHELLINC) + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m4 + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/chconf.h new file mode 100644 index 0000000..7d9ace3 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/chconf.h @@ -0,0 +1,513 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file TEENSY3_x/USB_SERIAL/chconf.h + * @brief Configuration file. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* System halt code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/chtsy.inf b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/chtsy.inf new file mode 100644 index 0000000..4ae7d0b --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/chtsy.inf @@ -0,0 +1,106 @@ +;************************************************************ +; Windows USB CDC ACM Setup File +; Copyright (c) 2000 Microsoft Corporation + + +[Version] +Signature="$Windows NT$" +Class=Ports +ClassGuid={4D36E978-E325-11CE-BFC1-08002BE10318} +Provider=%MFGNAME% +LayoutFile=layout.inf +CatalogFile=%MFGFILENAME%.cat +DriverVer=11/15/2007,5.1.2600.0 + +[Manufacturer] +%MFGNAME%=DeviceList, NTamd64 + +[DestinationDirs] +DefaultDestDir=12 + + +;------------------------------------------------------------------------------ +; Windows 2000/XP/Vista-32bit Sections +;------------------------------------------------------------------------------ + +[DriverInstall.nt] +include=mdmcpq.inf +CopyFiles=DriverCopyFiles.nt +AddReg=DriverInstall.nt.AddReg + +[DriverCopyFiles.nt] +usbser.sys,,,0x20 + +[DriverInstall.nt.AddReg] +HKR,,DevLoader,,*ntkern +HKR,,NTMPDriver,,%DRIVERFILENAME%.sys +HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" + +[DriverInstall.nt.Services] +AddService=usbser, 0x00000002, DriverService.nt + +[DriverService.nt] +DisplayName=%SERVICE% +ServiceType=1 +StartType=3 +ErrorControl=1 +ServiceBinary=%12%\%DRIVERFILENAME%.sys + +;------------------------------------------------------------------------------ +; Vista-64bit Sections +;------------------------------------------------------------------------------ + +[DriverInstall.NTamd64] +include=mdmcpq.inf +CopyFiles=DriverCopyFiles.NTamd64 +AddReg=DriverInstall.NTamd64.AddReg + +[DriverCopyFiles.NTamd64] +%DRIVERFILENAME%.sys,,,0x20 + +[DriverInstall.NTamd64.AddReg] +HKR,,DevLoader,,*ntkern +HKR,,NTMPDriver,,%DRIVERFILENAME%.sys +HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider" + +[DriverInstall.NTamd64.Services] +AddService=usbser, 0x00000002, DriverService.NTamd64 + +[DriverService.NTamd64] +DisplayName=%SERVICE% +ServiceType=1 +StartType=3 +ErrorControl=1 +ServiceBinary=%12%\%DRIVERFILENAME%.sys + + +;------------------------------------------------------------------------------ +; Vendor and Product ID Definitions +;------------------------------------------------------------------------------ +; When developing your USB device, the VID and PID used in the PC side +; application program and the firmware on the microcontroller must match. +; Modify the below line to use your VID and PID. Use the format as shown below. +; Note: One INF file can be used for multiple devices with different VID and PIDs. +; For each supported device, append ",USB\VID_xxxx&PID_yyyy" to the end of the line. +;------------------------------------------------------------------------------ +[SourceDisksFiles] +[SourceDisksNames] +[DeviceList] +%DESCRIPTION%=DriverInstall, USB\VID_0179&PID_0001 + +[DeviceList.NTamd64] +%DESCRIPTION%=DriverInstall, USB\VID_0179&PID_0001 + + +;------------------------------------------------------------------------------ +; String Definitions +;------------------------------------------------------------------------------ +;Modify these strings to customize your device +;------------------------------------------------------------------------------ +[Strings] +MFGFILENAME="ChTsy" +DRIVERFILENAME ="usbser" +MFGNAME="NopeLab" +INSTDISK="ChTsy CDC driver" +DESCRIPTION="ChTsy CDC driver" +SERVICE="USB RS-232 Emulation Driver" \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/halconf.h new file mode 100644 index 0000000..329f831 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/halconf.h @@ -0,0 +1,353 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file TEENSY3_x/USB_SERIAL/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB TRUE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/main.c new file mode 100644 index 0000000..3ede0a2 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/main.c @@ -0,0 +1,161 @@ +/* + (C) 2015-2016 flabbergast + Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include +#include + +#include "ch.h" +#include "hal.h" + +#include "shell.h" +#include "chprintf.h" + +#include "usbcfg.h" + +/*===========================================================================*/ +/* Command line related. */ +/*===========================================================================*/ + +#define SHELL_WA_SIZE THD_WORKING_AREA_SIZE(2048) + +/* Can be measured using dd if=/dev/xxxx of=/dev/null bs=512 count=10000.*/ +static void cmd_write(BaseSequentialStream *chp, int argc, char *argv[]) { + static uint8_t buf[] = + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef" + "0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef"; + + (void)argv; + if (argc > 0) { + chprintf(chp, "Usage: write\r\n"); + return; + } + + while (chnGetTimeout((BaseChannel *)chp, TIME_IMMEDIATE) == Q_TIMEOUT) { +#if 1 + /* Writing in channel mode.*/ + chnWrite(&SDU1, buf, sizeof buf - 1); +#else + /* Writing in buffer mode.*/ + (void) obqGetEmptyBufferTimeout(&SDU1.obqueue, TIME_INFINITE); + memcpy(SDU1.obqueue.ptr, buf, SERIAL_USB_BUFFERS_SIZE); + obqPostFullBuffer(&SDU1.obqueue, SERIAL_USB_BUFFERS_SIZE); +#endif + } + chprintf(chp, "\r\n\nstopped\r\n"); +} + +static const ShellCommand commands[] = { + {"write", cmd_write}, + {NULL, NULL} +}; + +static const ShellConfig shell_cfg1 = { + (BaseSequentialStream *)&SDU1, + commands +}; + +/*===========================================================================*/ +/* Generic code. */ +/*===========================================================================*/ + +/* + * Red LED blinker thread, times are in milliseconds. + */ +static THD_WORKING_AREA(waThread1, 128); +static THD_FUNCTION(Thread1, arg) { + + (void)arg; + chRegSetThreadName("blinker"); + while (true) { + systime_t time; + + time = serusbcfg.usbp->state == USB_ACTIVE ? 250 : 500; + palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); + chThdSleepMilliseconds(time); + palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); + chThdSleepMilliseconds(time); + } +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Initializes a serial-over-USB CDC driver. + */ + sduObjectInit(&SDU1); + sduStart(&SDU1, &serusbcfg); + + /* + * Activates the USB driver and then the USB bus pull-up on D+. + * Note, a delay is inserted in order to not have to disconnect the cable + * after a reset. + */ + usbDisconnectBus(serusbcfg.usbp); + chThdSleepMilliseconds(1500); + usbStart(serusbcfg.usbp, &usbcfg); + usbConnectBus(serusbcfg.usbp); + + /* + * Shell manager initialization. + */ + shellInit(); + + /* + * Creates the blinker thread. + */ + chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); + + /* + * Normal main() thread activity, spawning shells. + */ + while (true) { + if (SDU1.config->usbp->state == USB_ACTIVE) { + thread_t *shelltp = chThdCreateFromHeap(NULL, SHELL_WA_SIZE, + "shell", NORMALPRIO + 1, + shellThread, (void *)&shell_cfg1); + chThdWait(shelltp); /* Waiting termination. */ + } + chThdSleepMilliseconds(1000); + } +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/mcuconf.h new file mode 100644 index 0000000..59e1e82 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/mcuconf.h @@ -0,0 +1,40 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define K20x_MCUCONF + +/* + * HAL driver system settings. + */ +/* PEE mode - 48MHz system clock driven by external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +/* + * USB driver settings + */ +#define KINETIS_USB_USE_USB0 TRUE + +#endif /* _MCUCONF_H_ */ \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.c new file mode 100644 index 0000000..3093640 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.c @@ -0,0 +1,329 @@ +/* + (C) 2015-2016 flabbergast + Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "hal.h" + +/* Virtual serial port over USB.*/ +SerialUSBDriver SDU1; + +/* + * Endpoints to be used for USBD1. + */ +#define USBD1_DATA_REQUEST_EP 1 +#define USBD1_DATA_AVAILABLE_EP 1 +#define USBD1_INTERRUPT_REQUEST_EP 2 + +/* + * USB Device Descriptor. + */ +static const uint8_t vcom_device_descriptor_data[18] = { + USB_DESC_DEVICE (0x0110, /* bcdUSB (1.1). */ + 0x02, /* bDeviceClass (CDC). */ + 0x00, /* bDeviceSubClass. */ + 0x00, /* bDeviceProtocol. */ + 0x40, /* bMaxPacketSize. */ + 0x0179, /* idVendor. */ + 0x0001, /* idProduct. */ + 0x0200, /* bcdDevice. */ + 1, /* iManufacturer. */ + 2, /* iProduct. */ + 3, /* iSerialNumber. */ + 1) /* bNumConfigurations. */ +}; + +/* + * Device Descriptor wrapper. + */ +static const USBDescriptor vcom_device_descriptor = { + sizeof vcom_device_descriptor_data, + vcom_device_descriptor_data +}; + +/* Configuration Descriptor tree for a CDC.*/ +static const uint8_t vcom_configuration_descriptor_data[67] = { + /* Configuration Descriptor.*/ + USB_DESC_CONFIGURATION(67, /* wTotalLength. */ + 0x02, /* bNumInterfaces. */ + 0x01, /* bConfigurationValue. */ + 0, /* iConfiguration. */ + 0xC0, /* bmAttributes (self powered). */ + 50), /* bMaxPower (100mA). */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x00, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x01, /* bNumEndpoints. */ + 0x02, /* bInterfaceClass (Communications + Interface Class, CDC section + 4.2). */ + 0x02, /* bInterfaceSubClass (Abstract + Control Model, CDC section 4.3). */ + 0x01, /* bInterfaceProtocol (AT commands, + CDC section 4.4). */ + 0), /* iInterface. */ + /* Header Functional Descriptor (CDC section 5.2.3).*/ + USB_DESC_BYTE (5), /* bLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x00), /* bDescriptorSubtype (Header + Functional Descriptor. */ + USB_DESC_BCD (0x0110), /* bcdCDC. */ + /* Call Management Functional Descriptor. */ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x01), /* bDescriptorSubtype (Call Management + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bmCapabilities (D0+D1). */ + USB_DESC_BYTE (0x01), /* bDataInterface. */ + /* ACM Functional Descriptor.*/ + USB_DESC_BYTE (4), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x02), /* bDescriptorSubtype (Abstract + Control Management Descriptor). */ + USB_DESC_BYTE (0x02), /* bmCapabilities. */ + /* Union Functional Descriptor.*/ + USB_DESC_BYTE (5), /* bFunctionLength. */ + USB_DESC_BYTE (0x24), /* bDescriptorType (CS_INTERFACE). */ + USB_DESC_BYTE (0x06), /* bDescriptorSubtype (Union + Functional Descriptor). */ + USB_DESC_BYTE (0x00), /* bMasterInterface (Communication + Class Interface). */ + USB_DESC_BYTE (0x01), /* bSlaveInterface0 (Data Class + Interface). */ + /* Endpoint 2 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_INTERRUPT_REQUEST_EP|0x80, + 0x03, /* bmAttributes (Interrupt). */ + 0x0008, /* wMaxPacketSize. */ + 0xFF), /* bInterval. */ + /* Interface Descriptor.*/ + USB_DESC_INTERFACE (0x01, /* bInterfaceNumber. */ + 0x00, /* bAlternateSetting. */ + 0x02, /* bNumEndpoints. */ + 0x0A, /* bInterfaceClass (Data Class + Interface, CDC section 4.5). */ + 0x00, /* bInterfaceSubClass (CDC section + 4.6). */ + 0x00, /* bInterfaceProtocol (CDC section + 4.7). */ + 0x00), /* iInterface. */ + /* Endpoint 1 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_AVAILABLE_EP, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00), /* bInterval. */ + /* Endpoint 1 Descriptor.*/ + USB_DESC_ENDPOINT (USBD1_DATA_REQUEST_EP|0x80, /* bEndpointAddress.*/ + 0x02, /* bmAttributes (Bulk). */ + 0x0040, /* wMaxPacketSize. */ + 0x00) /* bInterval. */ +}; + +/* + * Configuration Descriptor wrapper. + */ +static const USBDescriptor vcom_configuration_descriptor = { + sizeof vcom_configuration_descriptor_data, + vcom_configuration_descriptor_data +}; + +/* + * U.S. English language identifier. + */ +static const uint8_t vcom_string0[] = { + USB_DESC_BYTE(4), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + USB_DESC_WORD(0x0409) /* wLANGID (U.S. English). */ +}; + +/* + * Vendor string. + */ +static const uint8_t vcom_string1[] = { + USB_DESC_BYTE(2+2*7), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'N', 0, 'o', 0, 'p', 0, 'e', 0, 'L', 0, 'a', 0, 'b', 0, +}; + +/* + * Device Description string. + */ +static const uint8_t vcom_string2[] = { + USB_DESC_BYTE(2+5*2), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + 'C', 0, 'h', 0, 'T', 0, 's', 0, 'y', 0, +}; + +/* + * Serial Number string. + */ +static const uint8_t vcom_string3[] = { + USB_DESC_BYTE(8), /* bLength. */ + USB_DESC_BYTE(USB_DESCRIPTOR_STRING), /* bDescriptorType. */ + '0' + CH_KERNEL_MAJOR, 0, + '0' + CH_KERNEL_MINOR, 0, + '0' + CH_KERNEL_PATCH, 0 +}; + +/* + * Strings wrappers array. + */ +static const USBDescriptor vcom_strings[] = { + {sizeof vcom_string0, vcom_string0}, + {sizeof vcom_string1, vcom_string1}, + {sizeof vcom_string2, vcom_string2}, + {sizeof vcom_string3, vcom_string3} +}; + +/* + * Handles the GET_DESCRIPTOR callback. All required descriptors must be + * handled here. + */ +static const USBDescriptor *get_descriptor(USBDriver *usbp, + uint8_t dtype, + uint8_t dindex, + uint16_t lang) { + (void)usbp; + (void)lang; + switch (dtype) { + case USB_DESCRIPTOR_DEVICE: + return &vcom_device_descriptor; + case USB_DESCRIPTOR_CONFIGURATION: + return &vcom_configuration_descriptor; + case USB_DESCRIPTOR_STRING: + if (dindex < 4) + return &vcom_strings[dindex]; + } + return NULL; +} + +/** + * @brief IN EP1 state. + */ +static USBInEndpointState ep1instate; + +/** + * @brief OUT EP1 state. + */ +static USBOutEndpointState ep1outstate; + +/** + * @brief EP1 initialization structure (both IN and OUT). + */ +static const USBEndpointConfig ep1config = { + USB_EP_MODE_TYPE_BULK, + NULL, + sduDataTransmitted, + sduDataReceived, + 0x0040, + 0x0040, + &ep1instate, + &ep1outstate, + 2, + NULL +}; + +/** + * @brief IN EP2 state. + */ +static USBInEndpointState ep2instate; + +/** + * @brief EP2 initialization structure (IN only). + */ +static const USBEndpointConfig ep2config = { + USB_EP_MODE_TYPE_INTR, + NULL, + sduInterruptTransmitted, + NULL, + 0x0010, + 0x0000, + &ep2instate, + NULL, + 1, + NULL +}; + +/* + * Handles the USB driver global events. + */ +static void usb_event(USBDriver *usbp, usbevent_t event) { + extern SerialUSBDriver SDU1; + + switch (event) { + case USB_EVENT_RESET: + return; + case USB_EVENT_ADDRESS: + return; + case USB_EVENT_CONFIGURED: + chSysLockFromISR(); + + /* Enables the endpoints specified into the configuration. + Note, this callback is invoked from an ISR so I-Class functions + must be used.*/ + usbInitEndpointI(usbp, USBD1_DATA_REQUEST_EP, &ep1config); + usbInitEndpointI(usbp, USBD1_INTERRUPT_REQUEST_EP, &ep2config); + + /* Resetting the state of the CDC subsystem.*/ + sduConfigureHookI(&SDU1); + + chSysUnlockFromISR(); + return; + case USB_EVENT_SUSPEND: + chSysLockFromISR(); + + /* Disconnection event on suspend.*/ + sduDisconnectI(&SDU1); + + chSysUnlockFromISR(); + return; + case USB_EVENT_WAKEUP: + return; + case USB_EVENT_STALLED: + return; + } + return; +} + +/* + * Handles the USB driver global events. + */ +static void sof_handler(USBDriver *usbp) { + + (void)usbp; + + osalSysLockFromISR(); + sduSOFHookI(&SDU1); + osalSysUnlockFromISR(); +} + +/* + * USB driver configuration. + */ +const USBConfig usbcfg = { + usb_event, + get_descriptor, + sduRequestsHook, + sof_handler +}; + +/* + * Serial over USB driver configuration. + */ +const SerialUSBConfig serusbcfg = { + &USBD1, + USBD1_DATA_REQUEST_EP, + USBD1_DATA_AVAILABLE_EP, + USBD1_INTERRUPT_REQUEST_EP +}; diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.h new file mode 100644 index 0000000..5aa501e --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY3_x/USB_SERIAL/usbcfg.h @@ -0,0 +1,27 @@ +/* + (C) 2015-2016 flabbergast + Based on ChibiOS USB_CDC demo - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _USBCFG_H_ +#define _USBCFG_H_ + +extern const USBConfig usbcfg; +extern SerialUSBConfig serusbcfg; +extern SerialUSBDriver SDU1; + +#endif /* _USBCFG_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/Makefile new file mode 100644 index 0000000..f868337 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/Makefile @@ -0,0 +1,213 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_LC/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk +# Other files (optional). + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MKL26Z64.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0plus + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/chconf.h new file mode 100644 index 0000000..d6a7bf8 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/chconf.h @@ -0,0 +1,514 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file TEENSY_LC/BOOTLOADER/chconf.h + * @brief Configuration file. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY TRUE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/halconf.h new file mode 100644 index 0000000..bd1d2a3 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/halconf.h @@ -0,0 +1,187 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file TEENSY_LC/BOOTLOADER/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/main.c new file mode 100644 index 0000000..d2c50e6 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/main.c @@ -0,0 +1,103 @@ +/* + (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ +#include "hal.h" + +#define BTN_GPIO TEENSY_PIN2_IOPORT +#define BTN_PIN TEENSY_PIN2 + +/* + * Jump to bootloader on ARM Teensies. + */ + +static void jump_to_bootloader(void) { + /* __asm__ volatile("bkpt"); */ + /* Same as above, CMSIS notation: */ + __BKPT(0); +} + +/* + * Blink thread. + */ + +static THD_WORKING_AREA(waBlinkThread, 128); +static THD_FUNCTION(BlinkThread, arg) { + (void)arg; + uint8_t i; + + // while(TRUE) { + for(i=0; i<5; i++) { + palSetPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); + chThdSleepMilliseconds(700); + palClearPad(TEENSY_PIN13_IOPORT, TEENSY_PIN13); + chThdSleepMilliseconds(700); + } + jump_to_bootloader(); +} + +/* + * Button thread. + */ + +static THD_WORKING_AREA(waButtonThread, 128); +static THD_FUNCTION(ButtonThread, arg) { + (void)arg; + + while(TRUE) { + if(palReadPad(BTN_GPIO, BTN_PIN) == PAL_LOW) { + jump_to_bootloader(); + } + chThdSleepMilliseconds(50); + } +} + +/* + * Application entry point. + */ +int main(void) { + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Button init. + */ + palSetPadMode(BTN_GPIO, BTN_PIN, PAL_MODE_INPUT_PULLUP); + + /* + * Create the blink thread. + */ + chThdCreateStatic(waBlinkThread, sizeof(waBlinkThread), NORMALPRIO, BlinkThread, NULL); + + /* + * Create the button thread. + */ + chThdCreateStatic(waButtonThread, sizeof(waButtonThread), NORMALPRIO, ButtonThread, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while(TRUE) { + chThdSleepMilliseconds(500); + } + + return 0; +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/mcuconf.h new file mode 100644 index 0000000..58a15b3 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/BOOTLOADER/mcuconf.h @@ -0,0 +1,53 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define KL2x_MCUCONF + +/* + * HAL driver system settings. + */ +#if 1 +/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL +#endif + +#if 0 +/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ +#endif + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +/* + * USB driver settings + */ +#define KINETIS_USB_USE_USB0 TRUE +/* need to redefine this, since the default is for K20x */ +#define KINETIS_USB_USB0_IRQ_PRIORITY 2 + +#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/MKL26Z64.ld b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/MKL26Z64.ld new file mode 100644 index 0000000..fb141f8 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/MKL26Z64.ld @@ -0,0 +1,105 @@ +/* + * Copyright (C) 2013-2016 Fabio Utzig, http://fabioutzig.com + * (C) 2016 flabbergast + * + * Permission is hereby granted, free of charge, to any person obtaining + * a copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +/* + * KL26Z64 memory setup. + */ +MEMORY +{ + flash0 : org = 0x00000000, len = 0x100 + flash1 : org = 0x00000400, len = 0x10 + flash2 : org = 0x00000410, len = 62k - 0x410 + flash3 : org = 0x0000F800, len = 2k + flash4 : org = 0x00000000, len = 0 + flash5 : org = 0x00000000, len = 0 + flash6 : org = 0x00000000, len = 0 + flash7 : org = 0x00000000, len = 0 + ram0 : org = 0x1FFFF800, len = 8k + ram1 : org = 0x00000000, len = 0 + ram2 : org = 0x00000000, len = 0 + ram3 : org = 0x00000000, len = 0 + ram4 : org = 0x00000000, len = 0 + ram5 : org = 0x00000000, len = 0 + ram6 : org = 0x00000000, len = 0 + ram7 : org = 0x00000000, len = 0 +} + +/* Flash region for the configuration bytes.*/ +SECTIONS +{ + .cfmprotect : ALIGN(4) SUBALIGN(4) + { + KEEP(*(.cfmconfig)) + } > flash1 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash0); +REGION_ALIAS("VECTORS_FLASH_LMA", flash0); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash2); +REGION_ALIAS("XTORS_FLASH_LMA", flash2); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash2); +REGION_ALIAS("TEXT_FLASH_LMA", flash2); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash2); +REGION_ALIAS("RODATA_FLASH_LMA", flash2); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash2); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash2); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +__eeprom_workarea_start__ = ORIGIN(flash3); +__eeprom_workarea_size__ = LENGTH(flash3); +__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__; + +/* Generic rules inclusion.*/ +INCLUDE rules.ld diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/Makefile new file mode 100644 index 0000000..a9534fc --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/Makefile @@ -0,0 +1,214 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_LC/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk +# Other files (optional). + +# Define linker script file here +LDSCRIPT = MKL26Z64.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + eeprom.c \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0plus + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/README.md b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/README.md new file mode 100644 index 0000000..5e11bd1 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/README.md @@ -0,0 +1,7 @@ +# Teensy LC EEPROM emulation example + +This example emulates 128 bytes of EEPROM, using 2K of flash. Some wear-levelling is done (see comments in `eeprom.c`). + +## Credits + +Most of the actual EEPROM code is from [PJRC/Teensyduino](https://www.pjrc.com/teensy/teensyduino.html). diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/chconf.h new file mode 100644 index 0000000..919e2b0 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/chconf.h @@ -0,0 +1,514 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file TEENSY_LC/EEPROM_EMU/chconf.h + * @brief Configuration file. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY TRUE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/eeprom.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/eeprom.c new file mode 100644 index 0000000..05ee313 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/eeprom.c @@ -0,0 +1,241 @@ +/* + * Eeprom emulation for KL2x chips. + * (c) 2015 flabbergast + * Most of the code is from PJRC/Teensyduino (license below) + * + * Notes: Some wear-levelling is done: + * - emulating 128 bytes of eeprom; i.e. 7 bit "eeprom addresses" + * - using 2048 bytes of flash + * - new values are written consecutively into flash + * as 16bit ("eeprom address",value) pairs + * - if all 2048 bytes of flash is used, it is erased and writes + * start from the beginning again + * - the 2048 bytes of flash used are at the end of the flash + * - BEWARE: there is no protection! Use a custom .ld script + * to make sure this area is never used for code! + */ + +/* Teensyduino Core Library + * http://www.pjrc.com/teensy/ + * Copyright (c) 2013 PJRC.COM, LLC. + * + * Permission is hereby granted, free of charge, to any person obtaining + * a copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sublicense, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * 1. The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * 2. If the Software is incorporated into a build system that allows + * selection among a list of target devices, then similar target + * devices manufactured by PJRC.COM must be included in the list of + * target devices and selectable in the same manner. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include "ch.h" +#include "hal.h" + +#define SYMVAL(sym) (uint32_t)(((uint8_t *)&(sym)) - ((uint8_t *)0)) + +extern uint32_t __eeprom_workarea_start__; +extern uint32_t __eeprom_workarea_end__; + +#define EEPROM_SIZE 128 + +static uint32_t flashend = 0; + +void eeprom_initialize(void) +{ + const uint16_t *p = (uint16_t *)SYMVAL(__eeprom_workarea_start__); + + do { + if (*p++ == 0xFFFF) { + flashend = (uint32_t)(p - 2); + return; + } + } while (p < (uint16_t *)SYMVAL(__eeprom_workarea_end__)); + flashend = (uint32_t)((uint16_t *)SYMVAL(__eeprom_workarea_end__) - 1); +} + +uint8_t eeprom_read_byte(const uint8_t *addr) +{ + uint32_t offset = (uint32_t)addr; + const uint16_t *p = (uint16_t *)SYMVAL(__eeprom_workarea_start__); + const uint16_t *end = (const uint16_t *)((uint32_t)flashend); + uint16_t val; + uint8_t data=0xFF; + + if (!end) { + eeprom_initialize(); + end = (const uint16_t *)((uint32_t)flashend); + } + if (offset < EEPROM_SIZE) { + while (p <= end) { + val = *p++; + if ((val & 255) == offset) data = val >> 8; + } + } + return data; +} + +static void flash_write(const uint16_t *code, uint32_t addr, uint32_t data) +{ + // with great power comes great responsibility.... + uint32_t stat; + *(uint32_t *)&(FTFA->FCCOB3) = 0x06000000 | (addr & 0x00FFFFFC); + *(uint32_t *)&(FTFA->FCCOB7) = data; + __disable_irq(); + (*((void (*)(volatile uint8_t *))((uint32_t)code | 1)))(&(FTFA->FSTAT)); + __enable_irq(); + stat = FTFA->FSTAT & (FTFA_FSTAT_RDCOLERR|FTFA_FSTAT_ACCERR|FTFA_FSTAT_FPVIOL); + if (stat) { + FTFA->FSTAT = stat; + } + MCM->PLACR |= MCM_PLACR_CFCC; +} + +void eeprom_write_byte(uint8_t *addr, uint8_t data) +{ + uint32_t offset = (uint32_t)addr; + const uint16_t *p, *end = (const uint16_t *)((uint32_t)flashend); + uint32_t i, val, flashaddr; + uint16_t do_flash_cmd[] = { + 0x2380, 0x7003, 0x7803, 0xb25b, 0x2b00, 0xdafb, 0x4770}; + uint8_t buf[EEPROM_SIZE]; + + if (offset >= EEPROM_SIZE) return; + if (!end) { + eeprom_initialize(); + end = (const uint16_t *)((uint32_t)flashend); + } + if (++end < (uint16_t *)SYMVAL(__eeprom_workarea_end__)) { + val = (data << 8) | offset; + flashaddr = (uint32_t)end; + flashend = flashaddr; + if ((flashaddr & 2) == 0) { + val |= 0xFFFF0000; + } else { + val <<= 16; + val |= 0x0000FFFF; + } + flash_write(do_flash_cmd, flashaddr, val); + } else { + for (i=0; i < EEPROM_SIZE; i++) { + buf[i] = 0xFF; + } + for (p = (uint16_t *)SYMVAL(__eeprom_workarea_start__); p < (uint16_t *)SYMVAL(__eeprom_workarea_end__); p++) { + val = *p; + if ((val & 255) < EEPROM_SIZE) { + buf[val & 255] = val >> 8; + } + } + buf[offset] = data; + for (flashaddr=(uint32_t)(uint16_t *)SYMVAL(__eeprom_workarea_start__); flashaddr < (uint32_t)(uint16_t *)SYMVAL(__eeprom_workarea_end__); flashaddr += 1024) { + *(uint32_t *)&(FTFA->FCCOB3) = 0x09000000 | flashaddr; + __disable_irq(); + (*((void (*)(volatile uint8_t *))((uint32_t)do_flash_cmd | 1)))(&(FTFA->FSTAT)); + __enable_irq(); + val = FTFA->FSTAT & (FTFA_FSTAT_RDCOLERR|FTFA_FSTAT_ACCERR|FTFA_FSTAT_FPVIOL);; + if (val) FTFA->FSTAT = val; + MCM->PLACR |= MCM_PLACR_CFCC; + } + flashaddr=(uint32_t)(uint16_t *)SYMVAL(__eeprom_workarea_start__); + for (i=0; i < EEPROM_SIZE; i++) { + if (buf[i] == 0xFF) continue; + if ((flashaddr & 2) == 0) { + val = (buf[i] << 8) | i; + } else { + val = val | (buf[i] << 24) | (i << 16); + flash_write(do_flash_cmd, flashaddr, val); + } + flashaddr += 2; + } + flashend = flashaddr; + if ((flashaddr & 2)) { + val |= 0xFFFF0000; + flash_write(do_flash_cmd, flashaddr, val); + } + } +} + +/* +void do_flash_cmd(volatile uint8_t *fstat) +{ + *fstat = 0x80; + while ((*fstat & 0x80) == 0) ; // wait +} +00000000 : + 0: 2380 movs r3, #128 ; 0x80 + 2: 7003 strb r3, [r0, #0] + 4: 7803 ldrb r3, [r0, #0] + 6: b25b sxtb r3, r3 + 8: 2b00 cmp r3, #0 + a: dafb bge.n 4 + c: 4770 bx lr +*/ + + +uint16_t eeprom_read_word(const uint16_t *addr) +{ + const uint8_t *p = (const uint8_t *)addr; + return eeprom_read_byte(p) | (eeprom_read_byte(p+1) << 8); +} + +uint32_t eeprom_read_dword(const uint32_t *addr) +{ + const uint8_t *p = (const uint8_t *)addr; + return eeprom_read_byte(p) | (eeprom_read_byte(p+1) << 8) + | (eeprom_read_byte(p+2) << 16) | (eeprom_read_byte(p+3) << 24); +} + +void eeprom_read_block(void *buf, const void *addr, uint32_t len) +{ + const uint8_t *p = (const uint8_t *)addr; + uint8_t *dest = (uint8_t *)buf; + while (len--) { + *dest++ = eeprom_read_byte(p++); + } +} + +int eeprom_is_ready(void) +{ + return 1; +} + +void eeprom_write_word(uint16_t *addr, uint16_t value) +{ + uint8_t *p = (uint8_t *)addr; + eeprom_write_byte(p++, value); + eeprom_write_byte(p, value >> 8); +} + +void eeprom_write_dword(uint32_t *addr, uint32_t value) +{ + uint8_t *p = (uint8_t *)addr; + eeprom_write_byte(p++, value); + eeprom_write_byte(p++, value >> 8); + eeprom_write_byte(p++, value >> 16); + eeprom_write_byte(p, value >> 24); +} + +void eeprom_write_block(const void *buf, void *addr, uint32_t len) +{ + uint8_t *p = (uint8_t *)addr; + const uint8_t *src = (const uint8_t *)buf; + while (len--) { + eeprom_write_byte(p++, *src++); + } +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/eeprom.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/eeprom.h new file mode 100644 index 0000000..74cf07b --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/eeprom.h @@ -0,0 +1,21 @@ +/* + * Eeprom emulation for KL2x chips. + * (c) 2015 flabbergast + * Most of the code is from PJRC/Teensyduino (license in eeprom.c) + */ + +#ifndef _EEPROM_H_ +#define _EEPROM_H_ + +void eeprom_initialize(void); +int eeprom_is_ready(void); +uint8_t eeprom_read_byte(const uint8_t *addr); +uint16_t eeprom_read_word(const uint16_t *addr); +uint32_t eeprom_read_dword(const uint32_t *addr); +void eeprom_read_block(void *buf, const void *addr, uint32_t len); +void eeprom_write_byte(uint8_t *addr, uint8_t data); +void eeprom_write_word(uint16_t *addr, uint16_t value); +void eeprom_write_dword(uint32_t *addr, uint32_t value); +void eeprom_write_block(const void *buf, void *addr, uint32_t len); + +#endif /* _EEPROM_H_ */ \ No newline at end of file diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/halconf.h new file mode 100644 index 0000000..278db95 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/halconf.h @@ -0,0 +1,187 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file TEENSY_LC/EEPROM_EMU/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/main.c new file mode 100644 index 0000000..c827944 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/EEPROM_EMU/main.c @@ -0,0 +1,78 @@ +/* + (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ +#include "hal.h" + +#include "eeprom.h" + +#define LED_GPIO TEENSY_PIN13_IOPORT +#define LED_PIN TEENSY_PIN13 + +uint8_t n_of_blinks; + +static THD_WORKING_AREA(waBlinkThread, 128); +static THD_FUNCTION(BlinkThread, arg) { + (void)arg; + uint8_t i; + + for(i=0; i + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define KL2x_MCUCONF + +/* + * HAL driver system settings. + */ +#if 1 +/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL +#endif + +#if 0 +/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ +#endif + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +/* + * USB driver settings + */ +#define KINETIS_USB_USE_USB0 TRUE +/* need to redefine this, since the default is for K20x */ +#define KINETIS_USB_USB0_IRQ_PRIORITY 2 + +#endif /* _MCUCONF_H_ */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/Makefile b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/Makefile new file mode 100644 index 0000000..f868337 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/Makefile @@ -0,0 +1,213 @@ +############################################################################## +# Build global options +# NOTE: Can be overridden externally. +# + +# Compiler options here. +ifeq ($(USE_OPT),) + USE_OPT = -O0 -ggdb -fomit-frame-pointer -falign-functions=16 +endif + +# C specific options here (added to USE_OPT). +ifeq ($(USE_COPT),) + USE_COPT = +endif + +# C++ specific options here (added to USE_OPT). +ifeq ($(USE_CPPOPT),) + USE_CPPOPT = -fno-rtti +endif + +# Enable this if you want the linker to remove unused code and data +ifeq ($(USE_LINK_GC),) + USE_LINK_GC = yes +endif + +# Linker extra options here. +ifeq ($(USE_LDOPT),) + USE_LDOPT = +endif + +# Enable this if you want link time optimizations (LTO) +ifeq ($(USE_LTO),) + USE_LTO = no +endif + +# If enabled, this option allows to compile the application in THUMB mode. +ifeq ($(USE_THUMB),) + USE_THUMB = yes +endif + +# Enable this if you want to see the full log while compiling. +ifeq ($(USE_VERBOSE_COMPILE),) + USE_VERBOSE_COMPILE = no +endif + +# If enabled, this option makes the build process faster by not compiling +# modules not used in the current configuration. +ifeq ($(USE_SMART_BUILD),) + USE_SMART_BUILD = yes +endif + +# +# Build global options +############################################################################## + +############################################################################## +# Architecture or project specific options +# + +# Stack size to be allocated to the Cortex-M process stack. This stack is +# the stack used by the main() thread. +ifeq ($(USE_PROCESS_STACKSIZE),) + USE_PROCESS_STACKSIZE = 0x200 +endif + +# Stack size to the allocated to the Cortex-M main/exceptions stack. This +# stack is used for processing interrupts and exceptions. +ifeq ($(USE_EXCEPTIONS_STACKSIZE),) + USE_EXCEPTIONS_STACKSIZE = 0x400 +endif + +# +# Architecture or project specific options +############################################################################## + +############################################################################## +# Project, sources and paths +# + +# Define project name here +PROJECT = ch + +# Imported source files and paths +CHIBIOS = ../../../../../ChibiOS-RT +CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib +# Startup files. +include $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_kl2x.mk +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +include $(CHIBIOS_CONTRIB)/os/hal/ports/KINETIS/KL2x/platform.mk +include $(CHIBIOS_CONTRIB)/os/hal/boards/PJRC_TEENSY_LC/board.mk +include $(CHIBIOS)/os/hal/osal/rt/osal.mk +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk +# Other files (optional). + +# Define linker script file here +LDSCRIPT= $(STARTUPLD)/MKL26Z64.ld + +# C sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CSRC = $(STARTUPSRC) \ + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + main.c + +# C++ sources that can be compiled in ARM or THUMB mode depending on the global +# setting. +CPPSRC = + +# C sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACSRC = + +# C++ sources to be compiled in ARM mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +ACPPSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCSRC = + +# C sources to be compiled in THUMB mode regardless of the global setting. +# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler +# option that results in lower performance and larger code size. +TCPPSRC = + +# List ASM source files here +ASMSRC = +ASMXSRC = $(STARTUPASM) $(PORTASM) $(OSALASM) + +INCDIR = $(CHIBIOS)/os/license \ + $(STARTUPINC) $(KERNINC) $(PORTINC) $(OSALINC) \ + $(HALINC) $(PLATFORMINC) $(BOARDINC) \ + $(CHIBIOS)/os/various + +# +# Project, sources and paths +############################################################################## + +############################################################################## +# Compiler settings +# + +MCU = cortex-m0plus + +#TRGT = arm-elf- +TRGT = arm-none-eabi- +CC = $(TRGT)gcc +CPPC = $(TRGT)g++ +# Enable loading with g++ only if you need C++ runtime support. +# NOTE: You can use C++ even without C++ support if you are careful. C++ +# runtime support makes code size explode. +LD = $(TRGT)gcc +#LD = $(TRGT)g++ +CP = $(TRGT)objcopy +AS = $(TRGT)gcc -x assembler-with-cpp +AR = $(TRGT)ar +OD = $(TRGT)objdump +SZ = $(TRGT)size +HEX = $(CP) -O ihex +BIN = $(CP) -O binary +SREC = $(CP) -O srec + +# ARM-specific options here +AOPT = + +# THUMB-specific options here +TOPT = -mthumb -DTHUMB + +# Define C warning options here +CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes + +# Define C++ warning options here +CPPWARN = -Wall -Wextra -Wundef + +# +# Compiler settings +############################################################################## + +############################################################################## +# Start of user section +# + +# List all user C define here, like -D_DEBUG=1 +UDEFS = + +# Define ASM defines here +UADEFS = + +# List all user directories here +UINCDIR = + +# List the user directory to look for the libraries here +ULIBDIR = + +# List all user libraries here +ULIBS = + +# +# End of user defines +############################################################################## + +RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC +include $(RULESPATH)/rules.mk diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/chconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/chconf.h new file mode 100644 index 0000000..b18de54 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/chconf.h @@ -0,0 +1,514 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file TEENSY_LC/PWM/chconf.h + * @brief Configuration file. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE TRUE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/halconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/halconf.h new file mode 100644 index 0000000..9cbb6b9 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/halconf.h @@ -0,0 +1,187 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file TEENSY_LC/PWM/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM TRUE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB FALSE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT FALSE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/main.c b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/main.c new file mode 100644 index 0000000..f8e6ba2 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/main.c @@ -0,0 +1,120 @@ +/* + (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ +#include "hal.h" + +#define PWM_DRIVER PWMD1 + +static void pwmpcb(PWMDriver *pwmp) { + (void)pwmp; + palSetLine(LINE_LED); +} + +static void pwmc0cb(PWMDriver *pwmp) { + (void)pwmp; + palClearLine(LINE_LED); +} + +static PWMConfig pwmcfg = { + 12000000, /* 12MHz PWM clock frequency. */ + 12000, /* Initial PWM period 1ms */ + pwmpcb, /* Callback on counter overflow */ + { + {PWM_OUTPUT_DISABLED, pwmc0cb}, /* ch2: mode, callback! */ + {PWM_OUTPUT_DISABLED, NULL}, /* ch2: mode, no callback */ + {PWM_OUTPUT_DISABLED, NULL}, /* ch2: mode, no callback */ + {PWM_OUTPUT_DISABLED, NULL}, /* ch3: mode, no callback */ + {PWM_OUTPUT_DISABLED, NULL}, /* ch4: mode, no callback */ + {PWM_OUTPUT_DISABLED, NULL} /* ch5: mode, no callback */ + }, +}; + +/* Breathing Sleep LED brighness(PWM On period) table + * + * http://www.wolframalpha.com/input/?i=%28sin%28+x%2F64*pi%29**8+*+255%2C+x%3D0+to+63 + * (0..63).each {|x| p ((sin(x/64.0*PI)**8)*255).to_i } + */ +/* ruby -e "a = ((0..255).map{|x| Math.exp(Math.cos(Math::PI+(2*x*(Math::PI)/255)))-Math.exp(-1) }); m = a.max; a.map\!{|x| (9900*x/m).to_i+1}; p a" */ +#define BREATHE_STEP 16 /* ms; = 4000ms/TABLE_SIZE */ +#define TABLE_SIZE 256 +static const uint16_t breathing_table[TABLE_SIZE] = { + 1, 1, 2, 5, 8, 12, 17, 24, 31, 39, 48, 58, 69, 81, 95, 109, 124, 140, 158, 177, 196, 217, 239, 263, 287, 313, 340, 369, 399, 430, 463, 497, 532, 570, 608, 649, 691, 734, 779, 827, 875, 926, 979, 1033, 1090, 1148, 1209, 1271, 1336, 1403, 1472, 1543, 1617, 1693, 1771, 1852, 1935, 2021, 2109, 2199, 2292, 2387, 2486, 2586, 2689, 2795, 2903, 3014, 3127, 3243, 3362, 3482, 3606, 3731, 3859, 3989, 4122, 4256, 4392, 4531, 4671, 4813, 4957, 5102, 5248, 5396, 5545, 5694, 5845, 5995, 6147, 6298, 6449, 6600, 6751, 6901, 7050, 7198, 7344, 7489, 7632, 7772, 7911, 8046, 8179, 8309, 8435, 8557, 8676, 8790, 8900, 9005, 9105, 9201, 9291, 9375, 9454, 9527, 9593, 9654, 9708, 9756, 9797, 9831, 9859, 9880, 9894, 9900, 9901, 9894, 9880, 9859, 9831, 9797, 9756, 9708, 9654, 9593, 9527, 9454, 9375, 9291, 9201, 9105, 9005, 8900, 8790, 8676, 8557, 8435, 8309, 8179, 8046, 7911, 7772, 7632, 7489, 7344, 7198, 7050, 6901, 6751, 6600, 6449, 6298, 6147, 5995, 5845, 5694, 5545, 5396, 5248, 5102, 4957, 4813, 4671, 4531, 4392, 4256, 4122, 3989, 3859, 3731, 3606, 3482, 3362, 3243, 3127, 3014, 2903, 2795, 2689, 2586, 2486, 2387, 2292, 2199, 2109, 2021, 1935, 1852, 1771, 1693, 1617, 1543, 1472, 1403, 1336, 1271, 1209, 1148, 1090, 1033, 979, 926, 875, 827, 779, 734, 691, 649, 608, 570, 532, 497, 463, 430, 399, 369, 340, 313, 287, 263, 239, 217, 196, 177, 158, 140, 124, 109, 95, 81, 69, 58, 48, 39, 31, 24, 17, 12, 8, 5, 2, 1, 1 +}; + +uint16_t table_pos = 0; + +static THD_WORKING_AREA(waBreatheThread, 128); +static THD_FUNCTION(BreatheThread, arg) { + (void)arg; + chRegSetThreadName("breatheThread"); + + while(!chThdShouldTerminateX()) { + pwmEnableChannel(&PWM_DRIVER, 0, PWM_PERCENTAGE_TO_WIDTH(&PWM_DRIVER,breathing_table[table_pos])); + table_pos = (table_pos+1) % TABLE_SIZE; + chThdSleepMilliseconds(BREATHE_STEP); + } +} + +/* + * Application entry point. + */ +int main(void) { + + /* + * System initializations. + * - HAL initialization, this also initializes the configured device drivers + * and performs the board-specific initializations. + * - Kernel initialization, the main() function becomes a thread and the + * RTOS is active. + */ + halInit(); + chSysInit(); + + /* + * Initialize the PWM driver. + */ + pwmStart(&PWM_DRIVER, &pwmcfg); + pwmEnablePeriodicNotification(&PWM_DRIVER); + + /* + * Starts the PWM channel 0, turn the LED off. + */ + pwmEnableChannel(&PWM_DRIVER, 0, 0); + pwmEnableChannelNotification(&PWM_DRIVER, 0); // MUST be before EnableChannel... + + /* + * Create the breathe thread. + */ + thread_t *breathe_thread_p; + breathe_thread_p = chThdCreateStatic(waBreatheThread, sizeof(waBreatheThread), NORMALPRIO, BreatheThread, NULL); + + /* + * Normal main() thread activity, in this demo it does nothing. + */ + while (!chThdShouldTerminateX()) { + chThdSleepMilliseconds(500); + } + + chThdTerminate(breathe_thread_p); + chThdSleepMilliseconds(2*BREATHE_STEP); + + /* + * Disables channel 0 and stops the drivers. + */ + pwmDisableChannel(&PWM_DRIVER, 0); + pwmStop(&PWM_DRIVER); + + return 0; +} diff --git a/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/mcuconf.h b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/mcuconf.h new file mode 100644 index 0000000..189fcb6 --- /dev/null +++ b/ChibiOS_16.1.5/community/testhal/KINETIS/TEENSY_LC/PWM/mcuconf.h @@ -0,0 +1,58 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define KL2x_MCUCONF + +/* + * HAL driver system settings. + */ +#if 1 +/* PEE mode - 48MHz system clock driven by (16 MHz) external crystal. */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_PEE +#define KINETIS_PLLCLK_FREQUENCY 96000000UL +#define KINETIS_SYSCLK_FREQUENCY 48000000UL +#endif + +#if 0 +/* crystal-less FEI mode - 48 MHz with internal 32.768 kHz crystal */ +#define KINETIS_MCG_MODE KINETIS_MCG_MODE_FEI +#define KINETIS_MCG_FLL_DMX32 1 /* Fine-tune for 32.768 kHz */ +#define KINETIS_MCG_FLL_DRS 1 /* 1464x FLL factor */ +#define KINETIS_SYSCLK_FREQUENCY 47972352UL /* 32.768 kHz * 1464 (~48 MHz) */ +#define KINETIS_CLKDIV1_OUTDIV1 1 /* do not divide system clock */ +#endif + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +/* + * USB driver settings + */ +#define KINETIS_USB_USE_USB0 TRUE +/* need to redefine this, since the default is for K20x */ +#define KINETIS_USB_USB0_IRQ_PRIORITY 2 + +/* + * PWM driver settings. + */ +#define KINETIS_PWM_USE_TPM0 TRUE + +#endif /* _MCUCONF_H_ */ -- cgit v1.2.3