From 5a059c8d6ecfe2f98a77570b8b6cf13c500398f7 Mon Sep 17 00:00:00 2001 From: Clyne Sullivan Date: Fri, 11 Nov 2016 15:15:16 -0500 Subject: tar'd chibi --- .../testhal/STM32/STM32F1xx/onewire/readme.txt | 32 ---------------------- 1 file changed, 32 deletions(-) delete mode 100644 ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/readme.txt (limited to 'ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/readme.txt') diff --git a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/readme.txt b/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/readme.txt deleted file mode 100644 index f10ae0b..0000000 --- a/ChibiOS_16.1.5/community/testhal/STM32/STM32F1xx/onewire/readme.txt +++ /dev/null @@ -1,32 +0,0 @@ -***************************************************************************** -** ChibiOS/RT HAL - 1-Wire driver demo for STM32F1xx. ** -***************************************************************************** - -** TARGET ** - -The demo will on an Olimex STM32_103STK board. - -** The Demo ** - -The application demonstrates the use of the STM32F1xx 1-Wire driver. - -** Board Setup ** - -To use demo you have to power your 1-wire device from 5V bus on board -and connect DQ line to PB0 pin. Do not forget about external pullup -resistor to 5V (4k7 recommended). - -** Build Procedure ** - -The demo has been tested using the free Codesourcery GCC-based toolchain -and YAGARTO. -Just modify the TRGT line in the makefile in order to use different GCC ports. - -** Notes ** - -Some files used by the demo are not part of ChibiOS/RT but are copyright of -ST Microelectronics and are licensed under a different license. -Also note that not all the files present in the ST library are distributed -with ChibiOS/RT, you can find the whole library on the ST web site: - - http://www.st.com -- cgit v1.2.3